antifog afc bopp film - chiripal poly films · bopp film afc product description properties thermal...

UNIT TEST METHOD CB25HI-AFC CB30HI-AFC CB35HI-AFC CB40HI-AFC CB45HI-AFC Micron 25 30 35 40 45 Gauge 100 120 140 160 180 gm/m² 22.8 27.3 31.9 36.4 40.0 m2/kg 44.4 36.6 31.4 27.5 24.4 MD TD MD TD MD TD Internal % Internal gm/25mm Internal gm/15mm % ASTM D-1003 2.2 2.2 2.5 2.5 2.5 % ASTM D-1003 1250 Elongation Break % ASTM D-882 200 85 2800 Tensile Strength kg/cm² ASTM D-882 Nominal Thickness Chiripal Method Unit Weight Yield MECHANICAL PROPERTIES ANTIFOG BOPP FILM AFC PRODUCT DESCRIPTION PROPERTIES THERMAL PROPERTIES Thermal Shrinkage (at 120°C / 5 mins) % ASTM D-1204 <5.0 <3.0 Dy - ASTM D-1894 0.30 – 0.35 Heal Seal Range (NT side) 115-140 Sealing Strength (NT side) (120°C/2 Bar/1 sec) >950 SURFACE PROPERTIES Hot tack (120⁰C / 2 Bar/0.5 sec) >450 Corporate Office: Chiripal House Shivranjani Cross Road Satellite, Ahmedabad-380015 India [email protected] www.chiripalpolyfilms.in Last update 08/08/2016 *Available in inside / outside corona treated as per customer requirement A storage temperature below 30°C & humidity 55±5 % is recommended in orderto avoid any deterioration of the film surface properties. Excess humidity and heat can cause problem such as fast treatment decay,which can affect the quality of printing The property given in the technical data sheet do not constitute product specification but represent typical performance values based on the best of our knowledgeand believed to be accurate. These are given in good faith but it is for the customer to satisfy of the suitability for its own particular purpose. The user is solely responsible for the end use of the product and needs to perform their own tests to confirm the product suitability / compatibility in all respects. Chiripal Polyfilm doesnot guarantee the typical values. Chiripal Poly reserves the right to change the technical data sheet at any time for enhancing the quality of the products without prior information. ANTIFOG PROPERTIES Note: MD – Machine Direction, TD – Transverse Direction Internal Rating (A to E) E-Excellent Antifog Test DISCLAIMER * Suitable for cold antifog application * Antifog film for fresh vegetable / fruit / other packaging applications * Meat Packaging * Single / two ply printing lamination * High speed FFS machine * Flexible packaging STORE & HANDLING Chiripal Poly Films AFC is transparent coextruded both side heat sealable ANTIFOG film, has one side low sealing threshold seal strength with low cof and other side printable corona treated. The antifog side having very high heat seal strength and high hottack with broad sealing range which gives optimum performance on wide range of packaging machines. The film exhibits excellent antifog effect on refrigeration or room. Corona treated surface is specifically designed to provide excellent adhesion of ink . PRODUCT FEATURES *Excellent Antifog effect gives the see through characteristics. * Excellent in Cold fog characteristics * Excellent heat seal strength and hot tack in antifog side. * Low seal initiation temperature * Excellent antistatic and slip properties * Excellent printability on non antifog side APPLICATIONS Chiripal Poly Films complies with EC and FDA regulations. Specific documents and MSDS are available upon request FOOD CONTACT OPTICAL PROPERTIES Haze (max) Gloss at 45° 90 Surface Tension Dyne/cm ASTM D-2578 38 min Coefficient of Friction HEAT SEALABLE CORONA TREATED PRINTABLE SURFACE TRANSPARENT OPP CORE MODIFIED INTERMEDIATE LAYER MODIFIED INTERMEDIATE LAYER HIGH HEAT SEAL STRENGTH AND LOW COF ANTIFOG SIDE

Upload: hoangphuc

Post on 21-Jan-2019

214 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: ANTIFOG AFC BOPP FILM - Chiripal Poly Films · BOPP FILM AFC PRODUCT DESCRIPTION PROPERTIES THERMAL PROPERTIES Thermal Shrinkage (at 120°C / 5 mins) ... * Flexible packaging STORE

UNIT TEST METHOD CB25HI-AFC CB30HI-AFC CB35HI-AFC CB40HI-AFC CB45HI-AFC

Micron 25 30 35 40 45

Gauge 100 120 140 160 180

gm/m² 22.8 27.3 31.9 36.4 40.0

m2/kg 44.4 36.6 31.4 27.5 24.4

Internal %

Internal gm/25mm

Internal gm/15mm

% ASTM D-1003 2.2 2.2 2.5 2.5 2.5

% ASTM D-1003

1250

Elongation Break % ASTM D-882200

2800Tensile Strength kg/cm² ASTM D-882

Nominal Thickness

Chiripal MethodUnit Weight

Yield

MECHANICAL PROPERTIES

ANTIFOG

BOPP FILMAFC

PRODUCT DESCRIPTION PROPERTIES

THERMAL PROPERTIES

Thermal Shrinkage(at 120°C / 5 mins)

% ASTM D-1204<5.0

<3.0

Dy - ASTM D-1894 0.30 – 0.35

Heal Seal Range (NT side) 115-140Sealing Strength (NT side) (120°C/2 Bar/1 sec)

>950

SURFACE PROPERTIES

Hot tack(120⁰C / 2 Bar/0.5 sec)

>450

Corporate Office: Chiripal House Shivranjani Cross Road Satellite, Ahmedabad-380015 India [email protected] www.chiripalpolyfilms.in Last update 08/08/2016

*Available in inside / outside coronatreated as per customer requirement

A storage temperature below 30°C & humidity 55±5 % is recommended in orderto avoid any deterioration of the film surface properties. Excess humidity and heat can cause problem such as fast treatment decay,which can affect the quality of printing

The property given in the technical data sheet do not constitute product specification but represent typical performance valuesbased on the best of our knowledgeand believed to be accurate. These are given in good faith but it is for the customer tosatisfy of the suitability for its own particular purpose. The user is solely responsible for the end use of the product and needs toperform their own tests to confirm the product suitability / compatibility in all respects. Chiripal Polyfilm doesnot guarantee thetypical values. Chiripal Poly reserves the right to change the technical data sheet at any time for enhancing the quality of theproducts without prior information.

ANTIFOG PROPERTIES

Note: MD – Machine Direction, TD – Transverse Direction

Internal Rating (A to E) E-ExcellentAntifog Test

DISCLAIMER

* Suitable for cold antifog application* Antifog film for fresh vegetable / fruit / other packaging applications* Meat Packaging* Single / two ply printing lamination* High speed FFS machine* Flexible packaging

STORE & HANDLING

Chiripal Poly Films AFC is transparent coextruded both side heat sealable ANTIFOG film, has one side low sealing threshold seal strength with low cof and other side printable corona treated. The antifog side having very high heat seal strength and high hottack with broad sealing range which gives optimum performance on wide range of packaging machines. The film exhibits excellent antifog effect on refrigeration or room. Corona treated surface is specifically designed to provide excellent adhesion of ink .

PRODUCT FEATURES*Excellent Antifog effect gives the see through characteristics.* Excellent in Cold fog characteristics* Excellent heat seal strength and hot tack in antifog side.* Low seal initiation temperature * Excellent antistatic and slip properties* Excellent printability on non antifog side

APPLICATIONSChiripal Poly Films complies with EC and FDA regulations. Specific documents and MSDS are available upon request

FOOD CONTACT

OPTICAL PROPERTIES

Haze (max)

Gloss at 45° 90

Surface Tension Dyne/cm ASTM D-2578 38 min

Coefficient of Friction

HEAT SEALABLE CORONA TREATED

PRINTABLE SURFACE

TRANSPARENT OPP CORE

MODIFIED INTERMEDIATE LAYER

HIGH HEAT SEAL STRENGTH AND LOW