1

“EZ-HM” BRIDGE PLUG

The TMOT EZ Bridge Plug is a Hydro-Mechanical (HM) Packer that is set

by a combination of hydraulic pressure and mechanical pull, with setting tool being designed for a greater efficiency under high pressure situation. The EZ Bridge Plug is a simple, economical, fully drillable, and conventional string run permanent bridge plug. It is also ideal for applications in which a wireline unit is not available or economical. The HM packer is available in two types:

The economical 5000 psi version (EZ-5)

The high performance 10000 psi version (EZ-10)

The EZ HM Plug may be run and set in tandem with retrievable production packers, or as service tools.

APPLICATIONS

Well Abandonment

Temporary and Permanent Zonal Isolation

Squeeze Cementing

Fracturing

Deviated Wellbores

FEATURES

Settable in all Casing Grades

Drillable Cast Iron Construction

Metal Back-Up Rings to Prevent Rubber Extrusion

Usable for both Temporary and Permanent Services

Ratcheting Lock Ring Holds Setting Force

Excellent for Deviated Wells due to Compact Assembly

Designed to Eliminate risk of “ Accidental” Set

Large ID Through Setting Tool After Setting

Extremely Simple Operation

EZ-HM BRIDGE PLUG

2

EZ-HM BRIDGE PLUG

EZ-HM BRIDGE PLUG Technical Specification

CASING O.D T&C WEIGHT PLUG O.D SETTING RANGE SURFACE

PRESSURE

PULL FORCE

In. lbs.

in Lb/Ft in Min. Max. psi Min. Max.

3-1/2 5.75-10.3 2.750 2.867 3.258 1,500 10,000 13,000

4 5.6-14 3.190 3.340 3.732 1,500 17,000 20,000

4-1/2 9.5-15.1 3.562 3.826 4.090 1,500 28,000 30,000

5 11.5-20.8 3.937 4.154 4.560 1,500 28,000 30,000

5-1/2 13-23 4.312 4.580 5.044 1,500 28,000 30,000

5-3/4 14-25.2 4.699 4.890 5.290 1,500 30,000 33,000

6-5/8 17-32 5.375 5.595 6.135 1,500 45,000 50,000

7 17-35 5.687 6.000 6.538 1,500 45,000 50,000

7-5/8 20-39 6.312 6.625 7.125 1,500 45,000 50,000

8-5/8 24-49 7.125 7.310 8.097 1,500 45,000 50,000

9-5/8 29.3-58.4 8.175 8.435 9.063 1,500 45,000 50,000

10-3/4 32.7-60.7 9.437 9.660 10.192 1,500 45,000 50,000

11-3/4 38.6 10.437 10.772 11.150 1,500 45,000 50,000

60-83 9.937 10.192 10.772 1,500 45,000 50,000

13-3/8 48-84.5 11.880 12.175 12.715 1,500 45,000 50,000

3

“EZ DRILL SVB” SQUEEZE PACKER

The TMOT "EZ Drill SVB Squeeze Packer" has a brass mandrel that is

stronger and more ductile than cast-iron mandrel deployed in other packers. As a result, the packer can absorb greater tensile and impact loads as well as higher internal pressures. The brass mandrel is drilled as easily as the cast iron mandrel. The valve arrangement improves performance in high-temperature and high-pressure areas, especially when the valve is cycled repeatedly. The valve also performs well when it is cycled under conditions in which fluid cannot be held static, particularly when there is a pressure or a flow underneath. The slips of the EZ Drill SVB Squeeze Packer allow the packer to be set inside all casing grades up to V150.

FEATURES

Controls Flow and Pressure Differential in both Directions.

Allows Pressure-Testing of the Workstring.

Runs-in Quickly.

Sets inside a Wide Range of Casing Grades.

Contains Rugged Brass Mandrel, Improved Slips, and Enhanced Sliding- Valve Seals.

Can be Set on Electric Wireline, Slickline, Coiled Tubing, and Jointed Pipes.

Can be Set Mechanically or Hydraulically.

EZ DRILL SVB SQUEEZE PACKER Technical Specification

Nominal Casing Size

Max Recommended Temperature °F

Max Recommended Pressure Differental (psi)

Max Recommended weight on Packer (1b)

Externally applied (Across Packer

Rubbers)

Internally applied (Packer Mandrel

burst)

With Load Transfer Divice

WithOut Load Transfer Divice

4-1/2"

425 10000 10000 80000 20000 5"

5-1/2"

6"

6-5/8"

425 10000 10000 100000 40000 7"

7-5/8"

8-5/8" 350 10000 10000 100000 40000

9-5/8" 350 7500 10000 100000 50000

10-3/4" 300 7500 10000 100000 50000

11-3/4"

13-3/8" 250 5000 10000 100000 50000

4

“K1” CEMENT RETAINER

The K1 Cement Retainer is a high-performance, drillable cement retainer

which is ideal for most remedial cementing applications. The K1 was designed to function as a drillable squeeze packer that acts as a plug after cementing, which in turn traps squeeze pressure on the cement below the retainer and isolates the newly cemented area from the hydrostatic pressures above the cement retainer. This drillable cement retainer is available for most casing sizes and has a sliding valve arrangement for pressure containment. The tool can be set on wireline or threaded pipe. It has a two-way valve that is controlled from surface; no springs to cock or stick; just pick-up workstring to close and set-down to open the valve. The K1 Snap-Latch Setting Tool is designed to reliably set a mechanical cement retainer using tubing or drill pipe string. The K1 mechanical setting tool is designed to run and set K1 sleeve valve cement retainer. The tool incorporates both as stinger seal and built-in snap latch, allowing the tool to be latched into the retainer with set down weight and to be released with up strain or right-hand rotation. This tool can be run repeatedly by simply moving the drive housing (slip nut on smaller sizes) into position and installing new shear screws.

FEATURES

Can be set mechanically by tubing or drill pipe, or by wireline.

Run-in speed is determined by the operator.

Workstring can be tested before squeezing by picking-up to close the valve.

Automatic valve closing when picking-up the workstring ensures lock-in of the squeeze under final pressure as excess cement is circulated out.

Effectively isolates squeeze from hydrostatic pressure.

New material specifications developed result in faster drill out.

K1 CEMENT RETAINER

5

K1 CEMENT RETAINER

K1 CEMENT RETAINER Technical Specification

Retainer Size Min Tension Max Tension

5" 20000 lbs 30000 lbs

7" 30000 lbs 40000 lbs

9 5/8" & 13 3/8" 40000 lbs 50000 lbs

6

K1 CEMENT RETAINER Technical Specification

CASING O.D T&C WEIGHT SIZE BORE Maximum

O.D

Range of Casing I.D for Running

Minimum Maximum

in Lbs/Ft in. in. in. in.

4-1/2 9.5-16.6 1AA

1.345

3.593 3.826 4.090

5 11.5-18 1BB 3.937 4.154 4.560

5-1/2 13-23 2AA 4.312 4.580 5.044

6 14-26 2BB 4.937 5.140 5.522

6 10.5-12

3AA

2.000

5.375 5.595 6.135 6-5/8 17-34

7 32-38

7 17-35 3BB 5.687 5.004 6.538

7-5/8 20-39 4AA 6.132 6.560 7.125

8-5/8 24-49 5AA 7.125 7.511 8.097

9-5/8 29.3-53.5 6AA 8.125 8.435 9.063

10-3/4 60.7-81 6BB 9.000 9.250 9.660

10-3/4 32.75-60.7 7AA 9.437 9.660 10.192

11-3/4 38-60 8AA 10.437 10.772 11.150

11-3/4 77-102 8BB 11.562 11.633 12.464

13-3/8 48-72 9AA 12.000 12.175 12.715

Pressure Rating

1AA 10000 psi Above & Below 400 °F

6AA 8000 psi Above & Below 400 °F

6BB 5000 psi Above & Below 400 °F

7AA 5000 psi Above & Below 400 °F

8AA 4000 psi Above & Below 400 °F

8BB 3000 psi Above & Below 400 °F

9AA 3000 psi Above & Below 400 °F

7

“WL-BP” Wire Line Set Bridge Plug

The TMOT Wire Line Set Bridge Plug (WL-BP) is a fully drillable, high performance permanent bridge plug suitable for zone abandonment or temporary suspension. It will safely handle working differential pressure up to 10,000 Psi. A one piece element, combined with full 360º coverage metal back up rings, provides a reliable seal for high pressure and high temperature applications up to 300º F. WL-BP is designed for speed and safety aspects while running on wireline, and for strength and durability after setting, high performance and reliability is not compromised in any way. This plug may be run and set using a standard “E-4 Wireline Setting Tool and Sleeve” with no special adapter equipment required. This Bridge Plug may also be run on tubing or endless tubing using a Hydraulic Setting Tool. If necessary, the TMOT “Wire Line Bridge Plug” may be run on tubing or coiled tubing.

FEATURES

Cost Competitive.

Constructed from drillable materials.

Retaining rings assist in preventing element extrusion.

High temperature packing element is also available.

Set inside hi-grade casing (P-110 & V-150 …).

Temperature rating 150 degrees Celsius/300 degrees Fahrenheit.

Runs on existing wireline setting tool or hydraulic setting tools.

WL-BP Wire Line Set Bridge Plug Technical Specification

Casing Size

Casing Weight

Plug O.D

Setting Range Setting Force Min Max

in. lbs/ft in. in. in. lbs

11.5-21.4 3.937 4.1 4.5 33000

7 17-35 5.687 6 6.538 55000

40-64.9 8.122 8.281 8.835 55000

8

“TM-IRPP”

INFLATABL RTRIEVABLE PACKER

The TMOT Inflatable Retrievable Production Packer (IRPP) is a high-performance inflatable packer that incorporates a high-expansion inflate element with a robust chassis for completion and remedial applications. The TM-IRPP can be used as a treatment packer or as a completion packer. The TM-IRPP accepts other TMOT accessories making this tool suitable for a variety of applications, so it can be used to test tubing, casing, or liner integrity when deployed in conjunction with an existing plug in the wellbore or while TMOT bridge plug or Gravel-pack screens can be run below the TM-IRPP for sand control. In remedial applications, it can be used to pump stimulation fluids, cement, or polymers for water control. Using a simple Bull Plug, turns the packer into a sophisticated Bridge Plug where no other plug can compete.

A variety of chemical resistant elastomer compounds suitable for temperature up to 350 ◦F are available. The inflatable packer elements are typically supplied with a standard elastomer compound which is suitable for temperatures up to 240 ◦F; high temperature compounds are available upon customer request. Long, 48”, elastomer seal lengths provide excellent anchoring capabilities while still maintaining a positive seal in open-hole or cased hole application.

Applications

Especially suitable for vertical and high angled wells.

Zonal isolation of open or cased-hole to multiple zone completion.

Acts as a permanent or retrievable packer.

Serves as a retainer for squeezing or treating formations.

Spotting the location of casing or liner leakage.

Ideal for short-term production tests.

Useful for isolating casing patches.

TM-IRPP INFLATABL RTRIEVABLE PACKER

9

Features and advantages

High-performance inflation elements, capable of up to 3:1 expansion, make it ideal for high-expansion applications.

Discontinuous rib design maximizes expansion ratio.

Shallow square threads machined on mandrel (prevents element slipping during run-in).

Only axial work-string movement is required to equalize and deflate the tool for retrieval; therefore, the tool can be run on coiled tubing.

Strait-pull shear release facilitates retrieval on slickline, wireline, and coiled tubing.

With a hydraulically activated inflation valve, the packer can be set without manipulation.

Element O.D (IN)

Mandrel ID (IN)

Element Seal Length (IN)

3-1/2 1.25

48

4-1/4 2.00

4-5/6 2.00

2.50

5 2.00

5-1/2 2.00

2.50

6-1/4 2.00

2.50

6-3/4 2.00

2.50

6-7/8 2.00

2.50

7-1/2 2.50

7-7/8 2.50

9 2.50

9-1/4 2.50

10-1/2 2.50

IRPP Chasses ID (IN)

Element Size (IN)

Connections (IN)

1-1/4 3.50 2-3/8 EUE box up × 2-3/8 EUE pin down

2 4.25 and larger 2-3/8 EUE box up × 2-7/8 EUE pin down

2-1/2 4.63 and larger 2-7/8 EUE box up × 2-1/2 EUE pin down