arpf cutter

IABPF/ABPF

• TH Coated Inserts are ideal for high-speed and high-efficiency machining of hardened steels • CS Coated Inserts greatly improve tool life and machining efficiency in mild steels• Available in a variety of ball nose and corner radius geometries• Available carbide shanks provide increased damping and reduced vibration

IARPF/ARPF + IABPF/ABPF

Indexable Corner Radius and Ball End Mills for High-Precision FinishingHIGH PRECISION SERIES

Revolutionary New Insert Coatings Increase Tool Life in Mild and Hardened Steels

WWW.HITACHITOOLUSA.COM

� © �005 Hitachi Tool Engineering, Ltd.phone no. 800.333.1514 www.hitachitoolusa.com


TYPE PAGEIARPF/ARPF-S

High Precision Finishing Radius - Regular Length

6

IARPF/ARPF-L

High Precision Finishing Radius - Long Length

7

IARPF + IARPF-WR

High Precision Finishing Radius - Carbide Shank Regular Length

8

IARPF/ARPF-WL

High Precision Finishing Radius - Carbide Shank Long Length

9

ARPF-WE

High Precision Finishing Radius - Carbide Shank Extra Long Length

9

ARPFM

Modular High Precision Finishing Radius

10

INSERTS

High Precision Finishing Radius

11

3© �005 Hitachi Tool Engineering, Ltd.phone no. 800.333.1514 www.hitachitoolusa.com


TYPE PAGEIABPF/ABPF-S

High Precision Finishing Ball - Regular Length

1�

IABPF/ABPF-L

High Precision Finishing Ball - Long Length

13

IABPF/ABPF-W + IABPF-WR

High Precision Finishing Ball - Carbide Shank Regular Length

14

IABPF/ABPF-WL

High Precision Finishing Ball - Carbide Shank Long Length

15

ABPF-WE

High Precision Finishing Ball - Carbide Shank Extra Long Length

15

ABPFM

Modular High Precision Finishing Ball

16

INSERTS

High Precision Finishing Ball

17

4 © �005 Hitachi Tool Engineering, Ltd.phone no. 800.333.1514 www.hitachitoolusa.com


INTRODUCTIONThe Precision Finishing Indexable End Mill Series combines high precision inserts with revolutionary new coatings to provide higher machining efficiency and longer tool life. A variety of inch and metric inserts in both Ball Nose and Corner Radius styles are available, and holders are stocked in a variety of lengths in either steel or solid carbide shanks.

FEATURES

1. High Precision Inserts

For Ball Nose Inserts, the insert tolerance on the ball end is ±0.005mm (0.0002") and the set-up accuracy is ±0.01mm (0.0004"). For Corner Radius Inserts, the insert tolerance is ±0.015mm (0.0006") and the set-up accuracy is ±0.02mm (0.0008").

70

60

50

40

30

20

0 50 100 150 200(164 sfm) (328.1 sfm) (492.1 sfm) (656.2 sfm)

HRC

D2 (H)AISI 420

H13 (H)

P21

AISI 4140AISI 304

H13 (A)D2 (A)

AISI 1049

CUTTING SPEED (m/min)

Both metric ball nose and metric corner radius style inserts are available in Hitachi’s revolutionary TH and CS coatings. The TH coating provides unrivaled performance in hardened steels, and the CS coating is ideal for carbon and alloy steels.



�. TH Coated Inserts for High-Speed, High-Efficiency Machining of Hardened Steels

The high hardness and oxidation resistance of the revolutionary TH Coating ensure excellent performance and long tool life in 45-60HRC hardened steels such as H13, D2, and A2 as well as pre-hardened steels such as NAK80 and CENA1. High heat resistance makes TH Coated Inserts suitable for dry cutting.

3. CS Coated Inserts for High-Efficiency Machining of Carbon and Alloy Steels

Nano-crystal technology helps to reduce the friction-resistance of the coating while maintaining the hardness. This reduction in friction decreases tool wear and also makes dry cutting possible.

1

0.6

0.8

0.4

0.2

01000 2000 3000 4000

CO

EFF

ICIE

NT

OF

FRIC

TIO

N (

µ)

HARDNESS

TiN

TiAIN

CS

1200

800

1000

600

400

1000 2000 3000 4000

OX

IDIZ

ING

TE

MP

ER

ATU

RE

(C

°)

HARDNESS

TiN

TiAIN

TH


IARPFS - INCH

Part No. Flutes ØD L l l1 lb ls Draft Angle Ød1 Ød2 Type Insert

IARPF06S08 2 0.375 3.937 0.118 0.512 0.984 2.953 5.0° 0.500 0.354 A IZCFW060-Rx.x

IARPF08S08 2 0.500 4.331 0.157 0.591 1.181 3.150 - 0.500 0.480 B IZCFW080-Rx.x



IARPF/ARPF PRECISION FINISHING SERIESIARPF/ARPF-SCorner Radius StyleRegular Length

ARPFS - METRIC


ARPF08S12 2 8 100 2.5 10 22 78 9.5° 12 7.5 A ZCFW080-Rx.x

ARPF10S12 2 10 100 3.0 13 25 75 3.0° 12 9.5 A ZCFW100-Rx.x

ARPF12S12 2 12 110 4.0 15 30 80 - 12 11.5 B ZCFW120-Rx.x

ARPF16S16 2 16 130 5.0 17 50 80 - 16 15.5 B ZCFW160-Rx.x

ARPF20S20 2 20 140 6.0 21 60 80 - 20 19.5 B ZCFW200-Rx.x

ARPF25S25 2 25 150 8.0 24 70 80 - 25 �4.5 B ZCFW250-Rx.x

Inserts p. 11

SEMI-FINISHING FINISHING

60HRC 60 2 FLUTES

Part No. Clamp Screw Wrench

IARPF06S08 581-142 104-T10

IARPF08S08 581-143 105-T20

IARPF12S12 581-148 101-T25S

IARPF16S16 581-146 105-T30A

ARPF08S12 581-141 104-T8

ARPF10S12 581-142 104-T10

ARPF12S12 581-143 105-T20

ARPF16S16 581-144 105-T20

ARPF20S20 581-145 101-T25S

ARPF25S25 581-146 105-T30A

lb

A

B

R

l

lb lsL

Ød1

l1

ØD

Ød2

R ±0.015

Set-up ±0.010

CORNER RADIUS


IARPFL - INCH


IARPF06S08L 2 0.375 5.906 0.118 0.512 1.969 3.937 2.0° 0.500 0.354 A IZCFW060-Rx.x




IARPF/ARPF-LCorner Radius StyleLong Length

ARPFL - METRIC


ARPF08S12L 2 8 130 2.5 10 50 80 3.0° 12 7.5 A ZCFW080-Rx.x

ARPF10S16L 2 10 150 3.0 13 50 100 4.5° 16 9.5 A ZCFW100-Rx.x

ARPF12S16L 2 12 160 4.0 15 60 100 2.0° 16 11.5 A ZCFW120-Rx.x

ARPF16S16L 2 16 165 5.0 17 65 100 - 16 15.5 B ZCFW160-Rx.x

ARPF20S20L 2 20 180 6.0 21 80 100 - 20 19.5 B ZCFW200-Rx.x

ARPF25S25L 2 25 200 8.0 24 90 110 - 25 24.5 B ZCFW250-Rx.x

Inserts p. 11


IARPF06S08L 581-142 104-T10

IARPF08S10L 581-143 105-T20

IARPF12S16L 581-148 101-T25S

IARPF16S20L 581-146 105-T30A

ARPF08S12L 581-141 104-T8

ARPF10S16L 581-142 104-T10

ARPF12S16L 581-143 105-T20

ARPF16S16L 581-144 105-T20

ARPF20S20L 581-145 101-T25S

ARPF25S25L 581-146 105-T30A

lbL

R

l

ls

Ød1

l1

ØD

Ød2

R ±0.005

Set-up ±0.010


60HRC 60 2 FLUTESCORNER RADIUS

IARPF/ARPF PRECISION FINISHING SERIES


IARPFW - INCH

Part No. Flutes ØD L l l1 lb ls Ød1 Ød2 Type Insert

IARPF06S06W 2 0.375 3.937 0.118 0.906 1.378 2.559 0.375 0.366 B IZCFW060-Rx.x




IARPF/ARPF PRECISION FINISHING SERIESIARPF-W / IARPF-WRCorner Radius StyleCarbide ShankRegular Length

Inserts p. 11

IARPFWR - INCH


IARPF06S06WR 2 0.375 5.512 0.118 0.906 2.953 2.559 0.375 0.366 B IZCFW060-Rx.x

IARPF08S08WR 2 0.500 5.906 0.157 1.024 3.346 2.559 0.500 0.492 B IZCFW080-Rx.x


IARPF06S06W 581-142 104-T10

IARPF08S08W 581-143 105-T20

IARPF12S12W 581-148 101-T25S

IARPF16S16W 581-146 105-T30A

IARPF06S06WR 581-142 104-T10

IARPF08S08WR 581-143 105-T20

lbL

R

l

ls

Ød1

l1

ØD

Ød2CARBIDE

R ±0.005

Set-up ±0.010




IARPFWL - INCH

Part No. Flutes ØD L l l1 lb ls Ød1 Ød2 Type InsertIARPF06S06WL 2 0.375 7.087 0.118 0.512 1.378 5.709 0.375 0.366 B IZCFW060-Rx.x

IARPF08S08WL 2 0.500 7.087 0.157 0.591 1.772 5.315 0.500 0.492 B IZCFW080-Rx.x



Inserts p. 11

ARPFWL - METRIC


ARPF08S08WL 2 8 130 2.5 18 65 65 8 7.8 B ZCFW080-Rx.x



ARPFWE - METRIC


ARPF16S16WE 2 16 200 5 29 120 80 16 15.8 B ZCFW160-Rx.x




IARPF06S06WL 581-142 104-T10

IARPF08S08WL 581-143 105-T20

IARPF12S12WL 581-148 101-T25S

IARPF16S16WL 581-146 105-T30A

ARPF08S08WL 581-141 104-T8

ARPF10S10WL 581-142 104-T10

ARPF12S12WL 581-143 105-T20


ARPF16S16WE 581-144 105-T20

ARPF20S20WE 581-145 101-T25S

ARPF25S25WE 581-146 105-T30A

Llb

R

l

ls

Ød1

l1

ØD

Ød2

R ±0.005

Set-up ±0.010

IARPF/ARPF PRECISION FINISHING SERIESIARPF/ARPF-WL / ARPF-WECorner Radius StyleCarbide ShankLong Length / Extra Long Length



CARBIDE


ARPF-M - METRIC

Part No. Flutes ØD L l Ød1 Ød2 A B C E M Type InsertARPFM20 2 20 38 6 10.5 17.8 5.5 19 10 15 M10 15 ZCFW200-Rx.x

ARPFM25 2 25 38 8 12.5 20.8 5.5 22 10 17 M12 17 ZCFW250-Rx.x

IARPF/ARPF PRECISION FINISHING SERIESARPFMCorner Radius StyleModular


ARPFM20 581-145 101-T25S

ARPFM25 581-146 105-T30A

H

ød2

M

øD

C

AB

E

ød1

CR

l


60HRC 60 2 FLUTES

CR ±0.005

Set-up ±0.010

L

CORNER RADIUS

Inserts p. 11

CARBIDE SHANK - METRIC

Part No. ØD M L l2 ls Ød1 Ød2 Cutter Body

ASC20-10.5-170-9010.5 M10

170 90 80 1820 Ø20

ASC20-10.5-220-120 220 120 100 18

ASC25-12.5-215-11512.5 M12

215 115 100 2325 Ø25

ASC25-12.5-265-145 265 145 120 23

Ll2 ls

M

φd2

φD

φd1


IARPF/ARPF PRECISION FINISHING SERIESInserts

ØBB

COATING MATERIALS FOR INSERTS

Material nameISO Classification

Coating NameCoating Type Application Features

PCA12MP10

PCA CoatingPVD

General purpose for steel Uses TiAlN coating; for roughing to finishing

PTH08MP01-K01

TH CoatingPVD

For high-speed finishing of steel Uses nano-composite coating; excellent for high-speed cutting and finishing

PCS08MP01-M01-K01

CS CoatingPVD

For high-speed finishing of steel Uses nano-composite coating; excellent lubricity

METRICPart No. P

CA

12M

PT

H08

M

PC

S08

M

R (mm)

A(mm)

T(mm)

ØB(mm)

ZCFW080-R0.3 • • 0.3

9.7 2.1 8ZCFW080-R0.5 • • 0.5

ZCFW080-R1.0 • • 1.0

ZCFW100-R0.3 • • 0.3

12 2.7 10

ZCFW100-R0.5 • • 0.5

ZCFW100-R1.0 • • 1.0

ZCFW100-R1.5 • • 1.5

ZCFW100-R2.0 • • 2.0

ZCFW100-R3.0 • • 3.0

ZCFW120-R0.3 • • 0.3

14.6 4.2 12

ZCFW120-R0.5 • • 0.5

ZCFW120-R1.0 • • 1.0

ZCFW120-R1.5 • • 1.5

ZCFW120-R2.0 • • 2.0

ZCFW120-R3.0 • • 3.0

ZCFW160-R0.3 • • 0.3

16.6 4.2 16

ZCFW160-R0.5 • • 0.5

ZCFW160-R1.0 • • 1.0

ZCFW160-R1.5 • • 1.5

ZCFW160-R2.0 • • 2.0

ZCFW160-R3.0 • • 3.0

Part No. PC

A12

M

PT

H08

M

PC

S08

M

R(mm)

A(mm)

T(mm)

ØB(mm)

ZCFW200-R0.3 • • 0.3

19.9 5.2 20

ZCFW200-R0.5 • • 0.5

ZCFW200-R1.0 • • 1.0

ZCFW200-R1.5 • • 1.5

ZCFW200-R2.0 • • 2.0

ZCFW200-R3.0 • • 3.0

ZCFW250-R0.3 • • 0.3

22.6 6.2 25

ZCFW250-R0.5 • • 0.5

ZCFW250-R1.0 • • 1.0

ZCFW250-R2.0 • • 2.0

ZCFW250-R3.0 • • 3.0

INCHR

(in)A

(in)T

(in)ØB(in)

IZCFW060-R0.8 • 0.031

0.474 0.106 0.375 IZCFW060-R1.6 • 0.063

IZCFW060-R3.2 • 0.126

IZCFW080-R0.8 • 0.031

0.574 0.126 0.500 IZCFW080-R1.6 • 0.063

IZCFW080-R3.2 • 0.126

IZCFW120-R0.8 • 0.031

0.784 0.205 0.750 IZCFW120-R1.6 • 0.063

IZCFW120-R3.2 • 0.126

IZCFW160-R0.8 • 0.031

0.889 0.244 1.000 IZCFW160-R1.6 • 0.063

IZCFW160-R3.2 • 0.126

1� © �005 Hitachi Tool Engineering, Ltd.phone no. 800.333.1514 www.hitachitoolusa.com

IABPFS - INCH

Part No. Flutes ØD R L l l1 lb ls θ Ød1 Ød2 Type Insert

IABPF05S08 2 0.313 0.156 3.937 0.156 0.394 0.984 2.953 6.5˚ 0.500 0.291 A IZPFG050

IABPF06S08 2 0.375 0.188 3.937 0.187 0.512 0.984 2.953 4.5˚ 0.500 0.335 A IZPFG060

IABPF08S08 2 0.500 0.250 4.331 0.250 0.591 1.181 3.150 - 0.500 0.480 B IZPFG080

IABPF10S10 2 0.625 0.313 5.118 0.312 0.748 1.969 3.150 - 0.625 0.602 B IZPFG100

IABPF12S12 2 0.750 0.375 5.512 0.375 0.866 2.362 3.150 - 0.750 0.728 B IZPFG120

IABPF16S16 2 1.000 0.500 5.906 0.500 0.984 2.756 3.150 - 1.000 0.980 B IZPFG160


60HRC 60 2 FLUTES


IABPF05S08 581-141 104-T8

IABPF06S08 581-142 104-T10

IABPF08S08 581-143 105-T20

IABPF10S10 581-144 105-T20

IABPF12S12 581-148 101-T25S

IABPF16S16 581-146 105-T30A

IABPF/ABPF PRECISION FINISHING SERIESIABPF/ABPF-SBall End StyleRegular Length

ABPFS - METRIC

Part No. Flutes ØD R L l l1 lb ls θ Ød1 Ød2 Type InsertABPF08S12 2 8 4.0 100 5.0 10 22 78 9.5˚ 12 7.5 A ZPFG080

ABPF10S12 2 10 5.0 100 7.0 13 25 75 5.0˚ 12 9.5 A ZPFG100

ABPF12S12 2 12 6.0 110 8.0 15 30 80 - 12 11.5 B ZPFG120

ABPF16S20 2 16 8.0 130 10.0 19 50 80 2.5˚ 20 15.5 A ZPFG160

ABPF20S25 2 20 10.0 140 12.5 22 60 80 2.5˚ 25 19.5 A ZPFG200

ABPF25S32 2 25 12.5 150 15.0 25 70 80 3.0˚ 32 24.5 A ZPFG250

Inserts p. 17

l

lb lsL

Ød1

l1

θ

ØD

Ød

2

R

R ±0.005

øD ød1ød2

RII1

lb ls

θ

L

øD ød1

ød2

RI

I1lb ls

L

øD ød1ød2

RII1

lb ls

θ

L

øD ød1

ød2

RI

I1lb ls

L

A

B


ABPF08S12 581-141 104-T8

ABPF10S12 581-142 104-T10

ABPF12S12 581-143 105-T20

ABPF16S20 581-144 105-T20

ABPF20S25 581-145 101-T25S

ABPF25S32 581-146 105-T30A

Set-up ±0.010

BALL NOSE


IABPFL - INCH


IABPF05S08L 2 0.313 0.156 5.906 0.156 0.394 1.969 3.937 3.0° 0.500 0.291 A IZPFG050

IABPF06S08L 2 0.375 0.188 5.906 0.187 0.512 1.969 3.937 2.0° 0.500 0.335 A IZPFG060

IABPF08S10L 2 0.500 0.250 6.299 0.250 0.591 2.362 3.937 1.7° 0.625 0.480 A IZPFG080

IABPF10S12L 2 0.625 0.313 6.496 0.312 0.748 2.559 3.937 1.6° 0.750 0.602 A IZPFG100

IABPF12S16L 2 0.750 0.375 7.087 0.375 0.866 3.150 3.937 2.6° 1.000 0.728 A IZPFG120

IABPF16S20L 2 1.000 0.500 7.874 0.500 0.984 3.543 4.331 2.4° 1.250 0.980 A IZPFG160

ABPFL - METRIC


ABPF08S12L 2 8 4.0 130 5.0 10 50 80 3.0° 12 7.5 A ZPFG080

ABPF10S16L 2 10 5.0 150 7.0 13 50 100 5.0° 16 9.5 A ZPFG100

ABPF12S16L 2 12 6.0 160 8.0 20 60 100 3.0° 16 10.8 A ZPFG120

ABPF16S20L 2 16 8.0 160 10.0 19 65 95 2.0° 20 15.5 A ZPFG160

ABPF20S25L 2 20 10.0 180 12.5 22 80 100 2.0° 25 19.5 A ZPFG200

ABPF25S32L 2 25 12.5 200 15.0 25 90 110 3.0° 32 24.5 A ZPFG250

Inserts p. 17

IABPF/ABPF PRECISION FINISHING SERIESIABPF/ABPF-LBall End StyleLong Length


ABPF08S12L 581-141 104-T8

ABPF10S16L 581-142 104-T10

ABPF12S16L 581-143 105-T20

ABPF16S20L 581-144 105-T20

ABPF20S25L 581-145 101-T25S

ABPF25S32L 581-146 105-T30A


IABPF05S08L 581-141 104-T8

IABPF06S08L 581-142 104-T10

IABPF08S10L 581-143 105-T20

IABPF10S12L 581-144 105-T20

IABPF12S16L 581-148 101-T25S

IABPF16S20L 581-146 105-T30A

R l

lb lsL

Ød1

l1

ØD

Ød2

R ±0.005

Set-up ±0.010


60HRC 60 2 FLUTESBALL NOSE


IABPFW - INCH

Part No. Flutes ØD R L l l1 lb ls Ød1 Ød2 Type Insert

IABPF05S05W 2 0.313 0.156 3.937 0.156 0.709 1.181 2.756 0.313 0.303 B IZPFG050

IABPF06S06W 2 0.375 0.188 3.937 0.187 0.906 1.378 2.559 0.375 0.366 B IZPFG060

IABPF08S08W 2 0.500 0.250 4.331 0.250 1.024 1.772 2.559 0.500 0.472 B IZPFG080

IABPF10S10W 2 0.625 0.313 5.512 0.312 0.748 1.575 3.937 0.625 0.602 B IZPFG100

IABPF12S12W 2 0.750 0.375 6.299 0.375 0.866 2.165 2.559 0.750 0.728 B IZPFG120

IABPF16S16W 2 1.000 0.500 7.087 0.500 0.984 2.559 2.760 1.000 0.980 B IZPFG160

IABPF/ABPF PRECISION FINISHING SERIESIABPF/ABPF-W / IABPF-WRBall End StyleCarbide ShankRegular Length

IABPFWR - INCH


IABPF05S05WR 2 0.313 0.156 5.118 0.156 0.709 2.559 2.559 0.313 0.303 B IZPFG050

IABPF06S06WR 2 0.375 0.188 5.512 0.187 0.906 2.953 2.559 0.375 0.366 B IZPFG060

IABPF08S08WR 2 0.500 0.250 5.906 0.250 1.024 3.346 2.559 0.500 0.472 B IZPFG080

Inserts p. 17

ABPFW - METRIC


ABPF08S08W 2 8 4 100 5 18 30 70 8 7.8 B ZPFG080

ABPF10S10W 2 10 5 100 7 23 35 65 10 9.8 B ZPFG100

ABPF12S12W 2 12 6 110 8 26 45 65 12 11.8 B ZPFG120


IABPF05S05W 581-141 104-T8

IABPF06S06W 581-142 104-T10

IABPF08S08W 581-143 105-T20

IABPF10S10W 581-144 105-T20

IABPF12S12W 581-148 101-T25S

IABPF16S16W 581-146 105-T30A


IABPF05S05WR 581-141 104-T8

IABPF06S06WR 581-142 104-T10

IABPF08S08WR 581-143 105-T20

ABPF08S08W 581-141 104-T8

ABPF10S10W 581-142 104-T10

ABPF12S12W 581-143 105-T20

l

lb ls

Ød1

l1

ØD

Ød2

R

CARBIDE

R ±0.005

Set-up ±0.010




IABPFWL - INCH


IABPF05S05WL 2 0.313 0.156 7.087 0.156 0.394 1.378 5.709 0.313 0.303 B IZPFG050

IABPF06S06WL 2 0.375 0.188 7.087 0.187 0.512 1.378 5.709 0.375 0.366 B IZPFG060

IABPF08S08WL 2 0.500 0.250 7.087 0.250 0.591 1.772 5.315 0.500 0.472 B IZPFG080

IABPF10S10WL 2 0.625 0.313 7.874 0.312 0.787 2.559 5.315 0.625 0.602 B IZPFG100

IABPF12S12WL 2 0.750 0.375 9.843 0.375 0.866 3.150 6.693 0.750 0.728 B IZPFG120

IABPF16S16WL 2 1.000 0.500 9.843 0.500 0.984 3.150 6.693 1.000 0.980 B IZPFG160

Inserts p. 17

IABPF/ABPF PRECISION FINISHING SERIES

IABPF/ABPF-WL / ABPF-WEBall End StyleCarbide ShankLong Length / Extra Long Length

ABPFWL - METRIC

Part No. Flutes ØD R L l l1 lb ls Ød1 Ød2 Type InsertABPF08W08WL 2 8 4 130 5 18 65 65 8 7.8 B ZPFG080

ABPF10S10WL 2 10 5 140 7 23 75 65 10 9.8 B ZPFG100

ABPF12S12WL 2 12 6 150 8 26 85 65 12 11.8 B ZPFG120

ABPFWE - METRIC


ABPF16S16WE 2 16 8.0 200 10.0 19 120 80 16 15.8 B ZPFG160

ABPF20S20WE 2 20 10.0 250 12.5 22 150 100 20 19.8 B ZPFG200

ABPF25S25WE 2 25 12.5 300 15.0 25 190 110 25 �4.8 B ZPFG250


IABPF05S05WL 581-141 104-T8

IABPF06S06WL 581-142 104-T10

IABPF08S08WL 581-143 105-T20

IABPF10S10WL 581-144 105-T20

IABPF12S12WL 581-148 101-T25S

IABPF16S16WL 581-146 105-T30A


ABPF08S08WL 581-141 104-T8

ABPF10S10WL 581-142 104-T10

ABPF12S12WL 581-143 105-T20

ABPF16S16WE 581-144 105-T20

ABPF20S20WE 581-145 101-T25S

ABPF25S25WE 581-146 105-T30A

l

lb lsL

Ød1

l1

ØD

Ød2

R

CARBIDE

R ±0.005

Set-up ±0.010




ABPFM - METRIC

Part No. Flutes ØD R L l Ød1 Ød2 A B C E M Type InsertABPFM20 2 20 10.0 38 12.5 10.5 17.8 5.5 19 10.0 10 M10 15 ZPFG200

ABPFM25 2 25 12.5 38 15.0 12.5 20.8 5.5 22 10.0 10 M12 17 ZPFG250


60HRC 60 2 FLUTES

IABPF/ABPF PRECISION FINISHING SERIESABPFMBall End StyleModular

H

ød2

M

øD

C

AB

E

ød1

l

R


ABPFM20 581-145 101-T25S

ABPFM25 581-146 105-T30A

R ±0.005

Set-up ±0.010

L

BALL NOSE

Inserts p. 17

CARBIDE SHANK - METRIC

Part No. ØD M L l2 ls Ød1 Ød2 Cutter Body

ASC20-10.5-170-9010.5 M10

170 90 80 1820 Ø20

ASC20-10.5-220-120 220 120 100 18

ASC25-12.5-215-11512.5 M12

215 115 100 2325 Ø25

ASC25-12.5-265-145 265 145 120 23

Ll2 ls

M

φd2

φD

φd1


IABPF/ABPF PRECISION FINISHING SERIESInserts

R±0.005

I

METRICPart No. P

CA

12M

PT

H08

M

PC

S08

M

R (mm) A (mm) T (mm) ØB (mm)ZPFG080 • • • 4.0 9.7 2.1 8.0

ZPFG100 • • • 5.0 12.1 2.7 10.0

ZPFG120 • • • 6.0 14.6 3.2 12.0

ZPFG160 • • • 15.0 13.5 5.6 12.7

ZPFG200 • • • 10.0 20.3 5.2 20.0

ZPFG250 • • • 12.5 24.1 6.2 25.0

INCH R (in) A (in) T (in) ØB (in)IZPFG050 • * * 0.156 0.381 0.083 0.312

IZPFG060 • * * 0.188 0.478 0.106 0.375

IZPFG080 • * * 0.250 0.574 0.126 0.500

IZPFG100 • * * 0.313 0.653 0.165 0.625

IZPFG120 • * * 0.375 0.800 0.205 0.750

IZPFG160 • * * 0.500 0.948 0.244 1.000

* Available upon special request

COATING MATERIALS FOR INSERTS

Material nameISO Classification

Coating NameCoating Type Application Features

PCA12M PCA Coating General purpose for steel Uses TiAlN coating; for roughing to finishing

P10 PVD

PTH08M TH Coating For high-speed finishing of steel Uses nano-composite coating; excellent for high-speed cutting and finishingP01-K01 PVD

PCS08M CS Coating For high-speed finishing of steel Uses nano-composite coating; excellent lubricity

P01-M01-K01 PVD


IARPF/ARPF + IABPF/ABPFIARPF / ARPF Cutting ConditionsInch

Ø 5/16" or 8mm 3/8" or 10mm 1/2" or 12mm 5/8" or 16mm 3/4" or 20mm 1" or 25mm

No.of flutes 2 2 2 2 2 2

Operation General High Feed Finishing General High Feed Finishing General High Feed Finishing General High Feed Finishing General High Feed Finishing General High Feed Finishing

Carbon SteelAlloy Steel(＜30HRC)

N(rpm) 6370 11950 11950 5100 9560 9560 4250 7970 7970 2550 4780 4780 2550 4780 4780 2040 3830 3830

Vc(sfm) 525 984 984 525 984 984 525 984 984 525 984 984 525 984 984 525 984 984

Vf(in/min) 100 141 141 80 113 113 67 95 157 50 76 76 50 76 76 40 61 61

fz(in/t) 0.008 0.006 0.006 0.008 0.006 0.006 0.008 0.006 0.001 0.001 0.008 0.008 0.001 0.008 0.008 0.001 0.008 0.008

doc(in) 0.008 0.008 0.004 0.001 0.001 0.004 0.012 0.012 0.004 0.031 0.031 0.008 0.039 0.039 0.008 0.049 0.049 0.008

woc(in) 0.031 0.016 0.008 0.039 0.020 0.008 0.047 0.024 0.008 0.063 0.063 0.008 0.079 0.079 0.008 0.098 0.049 0.008

Tool SteelAlloy Steel(30-40HRC)

N(rpm) 4780 11150 11150 3830 8920 8920 3190 7440 7440 1920 4460 4460 1920 4460 4460 1530 3570 3570

Vc(sfm) 394 919 919 394 919 919 394 919 919 394 919 919 394 919 919 394 919 919

Vf(in/min) 76 132 132 61 106 106 50 88 88 38 71 71 38 71 71 30 56 56

fz(in/t) 0.008 0.006 0.006 0.008 0.006 0.006 0.008 0.006 0.006 0.001 0.008 0.008 0.001 0.008 0.008 0.001 0.008 0.008

doc(in) 0.008 0.008 0.004 0.001 0.001 0.004 0.012 0.012 0.004 0.031 0.031 0.008 0.039 0.039 0.008 0.049 0.049 0.008

woc(in) 0.031 0.016 0.008 0.039 0.020 0.008 0.047 0.024 0.008 0.063 0.063 0.008 0.079 0.079 0.008 0.098 0.098 0.008

Tool SteelPre-hardened(40-50HRC)

N(rpm) 4780 11150 11150 3830 8920 8920 3190 7440 7440 1600 4460 4460 1600 4460 4460 1280 3570 3570

Vc(sfm) 394 919 919 394 919 919 394 919 919 328 919 919 328 919 919 328 919 919

Vf(in/min) 38 44 44 30 35 35 25 30 30 15 21 21 15 21 21 12 17 17

fz(in/t) 0.004 0.002 0.002 0.004 0.002 0.002 0.004 0.002 0.002 0.005 0.002 0.002 0.005 0.002 0.002 0.005 0.002 0.002

doc(in) 0.008 0.008 0.004 0.001 0.001 0.004 0.012 0.012 0.004 0.031 0.031 0.008 0.039 0.039 0.008 0.049 0.049 0.008

woc(in) 0.031 0.008 0.008 0.039 0.001 0.008 0.047 0.012 0.008 0.063 0.031 0.008 0.079 0.039 0.008 0.098 0.049 0.008

Tool Steel(55-65HRC)

N(rpm) 3190 8760 8760 2550 7010 7010 2130 5840 5840 1280 3510 3510 1280 3510 3510 1020 2810 2810

Vc(sfm) 263 722 722 263 722 722 263 722 722 263 722 722 263 722 722 263 722 722

Vf(in/min) 25 35 35 20 28 28 17 23 23 12 17 17 12 17 17 10 13 13

fz(in/t) 0.004 0.002 0.002 0.004 0.002 0.002 0.004 0.002 0.002 0.005 0.002 0.002 0.005 0.002 0.002 0.005 0.002 0.002

doc(in) 0.008 0.008 0.004 0.001 0.001 0.004 0.012 0.012 0.004 0.031 0.031 0.008 0.039 0.039 0.008 0.049 0.049 0.008

woc(in) 0.031 0.031 0.001 0.039 0.031 0.001 0.047 0.035 0.012 0.063 0.031 0.008 0.079 0.039 0.008 0.098 0.049 0.008

Cast Iron N(rpm) 6370 15130 15130 5100 12110 12110 4250 10090 10090 2550 6060 6060 2550 6060 6060 2040 4850 4850

Vc(sfm) 525 1247 1247 525 1247 1247 525 1247 1247 525 1247 1247 525 1247 1247 525 1247 1247

Vf(in/min) 151 239 239 121 191 191 100 159 159 71 143 143 71 143 143 56 115 115

fz(in/t) 0.012 0.008 0.008 0.012 0.008 0.008 0.012 0.008 0.008 0.014 0.012 0.012 0.014 0.012 0.012 0.014 0.012 0.012

doc(in) 0.008 0.008 0.004 0.001 0.008 0.004 0.012 0.012 0.004 0.031 0.031 0.008 0.039 0.039 0.008 0.049 0.049 0.008

woc(in) 0.031 0.016 0.008 0.039 0.016 0.008 0.047 0.024 0.008 0.063 0.063 0.008 0.079 0.079 0.008 0.098 0.098 0.008

PCA12MPTH08M

PCA12MPTH08M

PCA12MPTH08M

PCA12MPTH08M

PTH08M







N(rpm) 6370 11950 11950 5100 9560 9560 4250 7970 7970 2550 4780 4780 2550 4780 4780 2040 3830 3830

Vc(sfm) 525 984 984 525 984 984 525 984 984 525 984 984 525 984 984 525 984 984

Vf(in/min) 100 141 141 80 113 113 67 95 157 50 76 76 50 76 76 40 61 61

fz(in/t) 0.008 0.006 0.006 0.008 0.006 0.006 0.008 0.006 0.001 0.001 0.008 0.008 0.001 0.008 0.008 0.001 0.008 0.008

doc(in) 0.008 0.008 0.004 0.001 0.001 0.004 0.012 0.012 0.004 0.031 0.031 0.008 0.039 0.039 0.008 0.049 0.049 0.008

woc(in) 0.031 0.016 0.008 0.039 0.020 0.008 0.047 0.024 0.008 0.063 0.063 0.008 0.079 0.079 0.008 0.098 0.049 0.008


N(rpm) 4780 11150 11150 3830 8920 8920 3190 7440 7440 1920 4460 4460 1920 4460 4460 1530 3570 3570

Vc(sfm) 394 919 919 394 919 919 394 919 919 394 919 919 394 919 919 394 919 919

Vf(in/min) 76 132 132 61 106 106 50 88 88 38 71 71 38 71 71 30 56 56

fz(in/t) 0.008 0.006 0.006 0.008 0.006 0.006 0.008 0.006 0.006 0.001 0.008 0.008 0.001 0.008 0.008 0.001 0.008 0.008

doc(in) 0.008 0.008 0.004 0.001 0.001 0.004 0.012 0.012 0.004 0.031 0.031 0.008 0.039 0.039 0.008 0.049 0.049 0.008

woc(in) 0.031 0.016 0.008 0.039 0.020 0.008 0.047 0.024 0.008 0.063 0.063 0.008 0.079 0.079 0.008 0.098 0.098 0.008


N(rpm) 4780 11150 11150 3830 8920 8920 3190 7440 7440 1600 4460 4460 1600 4460 4460 1280 3570 3570

Vc(sfm) 394 919 919 394 919 919 394 919 919 328 919 919 328 919 919 328 919 919

Vf(in/min) 38 44 44 30 35 35 25 30 30 15 21 21 15 21 21 12 17 17

fz(in/t) 0.004 0.002 0.002 0.004 0.002 0.002 0.004 0.002 0.002 0.005 0.002 0.002 0.005 0.002 0.002 0.005 0.002 0.002

doc(in) 0.008 0.008 0.004 0.001 0.001 0.004 0.012 0.012 0.004 0.031 0.031 0.008 0.039 0.039 0.008 0.049 0.049 0.008

woc(in) 0.031 0.008 0.008 0.039 0.001 0.008 0.047 0.012 0.008 0.063 0.031 0.008 0.079 0.039 0.008 0.098 0.049 0.008


N(rpm) 3190 8760 8760 2550 7010 7010 2130 5840 5840 1280 3510 3510 1280 3510 3510 1020 2810 2810

Vc(sfm) 263 722 722 263 722 722 263 722 722 263 722 722 263 722 722 263 722 722

Vf(in/min) 25 35 35 20 28 28 17 23 23 12 17 17 12 17 17 10 13 13

fz(in/t) 0.004 0.002 0.002 0.004 0.002 0.002 0.004 0.002 0.002 0.005 0.002 0.002 0.005 0.002 0.002 0.005 0.002 0.002

doc(in) 0.008 0.008 0.004 0.001 0.001 0.004 0.012 0.012 0.004 0.031 0.031 0.008 0.039 0.039 0.008 0.049 0.049 0.008

woc(in) 0.031 0.031 0.001 0.039 0.031 0.001 0.047 0.035 0.012 0.063 0.031 0.008 0.079 0.039 0.008 0.098 0.049 0.008

Cast Iron N(rpm) 6370 15130 15130 5100 12110 12110 4250 10090 10090 2550 6060 6060 2550 6060 6060 2040 4850 4850

Vc(sfm) 525 1247 1247 525 1247 1247 525 1247 1247 525 1247 1247 525 1247 1247 525 1247 1247

Vf(in/min) 151 239 239 121 191 191 100 159 159 71 143 143 71 143 143 56 115 115

fz(in/t) 0.012 0.008 0.008 0.012 0.008 0.008 0.012 0.008 0.008 0.014 0.012 0.012 0.014 0.012 0.012 0.014 0.012 0.012

doc(in) 0.008 0.008 0.004 0.001 0.008 0.004 0.012 0.012 0.004 0.031 0.031 0.008 0.039 0.039 0.008 0.049 0.049 0.008

woc(in) 0.031 0.016 0.008 0.039 0.016 0.008 0.047 0.024 0.008 0.063 0.063 0.008 0.079 0.079 0.008 0.098 0.098 0.008

IARPF / ARPF Cutting ConditionsInch(continued)

�0 © �005 Hitachi Tool Engineering, Ltd.phone no. 800.333.1514 www.hitachitoolusa.com

IARPF/ARPF + IABPF/ABPFIARPF / ARPF Cutting ConditionsMetric

Øφ 5/16" or 8mm 3/8" or 10mm 1/2" or 12mm 5/8" or 16mm 3/4" or 20mm 1" or 25mm




N(rpm) 6370 11950 11950 5100 9560 9560 4250 7970 7970 2550 4780 4780 2550 4780 4780 2040 3830 3830

Vc(m/min) 160 300 300 160 300 300 160 300 300 160 300 300 160 300 300 160 300 300

Vf(mm/min) 2550 3590 3590 2040 2870 2870 1700 2400 3990 1280 1920 1920 1280 1920 1920 1020 1540 1540

fz(mm/t) 0.2 0.15 0.15 0.2 0.15 0.15 0.2 0.15 0.25 0.25 0.2 0.2 0.25 0.2 0.2 0.25 0.2 0.2

doc(mm) 0.2 0.2 0.1 0.25 0.25 0.1 0.3 0.3 0.1 0.8 0.8 0.2 1 1 0.2 1.25 1.25 0.2

woc(mm) 0.8 0.4 0.2 1 0.5 0.2 1.2 0.6 0.2 1.6 1.6 0.2 2 2 0.2 2.5 1.25 0.2


N(rpm) 4780 11150 11150 3830 8920 8920 3190 7440 7440 1920 4460 4460 1920 4460 4460 1530 3570 3570

Vc(m/min) 120 280 280 120 280 280 120 280 280 120 280 280 120 280 280 120 280 280

Vf(mm/min) 1920 3350 3350 1540 2680 2680 1280 2240 2240 960 1790 1790 960 1790 1790 770 1430 1430

fz(mm/t) 0.2 0.15 0.15 0.2 0.15 0.15 0.2 0.15 0.15 0.25 0.2 0.2 0.25 0.2 0.2 0.25 0.2 0.2

doc(mm) 0.2 0.2 0.1 0.25 0.25 0.1 0.3 0.3 0.1 0.8 0.8 0.2 1 1 0.2 1.25 1.25 0.2

woc(mm) 0.8 0.4 0.2 1 0.5 0.2 1.2 0.6 0.2 1.6 1.6 0.2 2 2 0.2 2.5 2.5 0.2


N(rpm) 4780 11150 11150 3830 8920 8920 3190 7440 7440 1600 4460 4460 1600 4460 4460 1280 3570 3570

Vc(m/min) 120 280 280 120 280 280 120 280 280 100 280 280 100 280 280 100 280 280

Vf(mm/min) 960 1120 1120 770 900 900 640 750 750 390 540 540 390 540 540 310 430 430

fz(mm/t) 0.1 0.05 0.05 0.1 0.05 0.05 0.1 0.05 0.05 0.12 0.06 0.06 0.12 0.06 0.06 0.12 0.06 0.06

doc(mm) 0.2 0.2 0.1 0.25 0.25 0.1 0.3 0.3 0.1 0.8 0.8 0.2 1 1 0.2 1.25 1.25 0.2

woc(mm) 0.8 0.2 0.2 1 0.25 0.2 1.2 0.3 0.2 1.6 0.8 0.2 2 1 0.2 2.5 1.25 0.2


N(rpm) 3190 8760 8760 2550 7010 7010 2130 5840 5840 1280 3510 3510 1280 3510 3510 1020 2810 2810

Vc(m/min) 80 220 220 80 220 220 80 220 220 80 220 220 80 220 220 80 220 220

Vf(mm/min) 640 880 880 510 710 710 430 590 590 310 430 430 310 430 430 250 340 340

fz(mm/t) 0.1 0.05 0.05 0.1 0.05 0.05 0.1 0.05 0.05 0.12 0.06 0.06 0.12 0.06 0.06 0.12 0.06 0.06

doc(mm) 0.2 0.2 0.1 0.25 0.25 0.1 0.3 0.3 0.1 0.8 0.8 0.2 1 1 0.2 1.25 1.25 0.2

woc(mm) 0.8 0.8 0.25 1 0.8 0.25 1.2 0.9 0.3 1.6 0.8 0.2 2 1 0.2 2.5 1.25 0.2

Cast Iron N(rpm) 6370 15130 15130 5100 12110 12110 4250 10090 10090 2550 6060 6060 2550 6060 6060 2040 4850 4850

Vc(m/min) 160 380 380 160 380 380 160 380 380 160 380 380 160 380 380 160 380 380

Vf(mm/min) 3830 6060 6060 3060 4850 4850 2550 4040 4040 1790 3640 3640 1790 3640 3640 1430 2910 2910

fz(mm/t) 0.3 0.2 0.2 0.3 0.2 0.2 0.3 0.2 0.2 0.35 0.3 0.3 0.35 0.3 0.3 0.35 0.3 0.3

doc(mm) 0.2 0.2 0.1 0.25 0.2 0.1 0.3 0.3 0.1 0.8 0.8 0.2 1 1 0.2 1.25 1.25 0.2

woc(mm) 0.8 0.4 0.2 1 0.4 0.2 1.2 0.6 0.2 1.6 1.6 0.2 2 2 0.2 2.5 2.5 0.2

PCA12MPTH08M

PCA12MPTH08M

PCA12MPTH08M

PCA12MPTH08M

PTH08M

�1© �005 Hitachi Tool Engineering, Ltd.phone no. 800.333.1514 www.hitachitoolusa.com


Øφ 5/16" or 8mm 3/8" or 10mm 1/2" or 12mm 5/8" or 16mm 3/4" or 20mm 1" or 25mm




N(rpm) 6370 11950 11950 5100 9560 9560 4250 7970 7970 2550 4780 4780 2550 4780 4780 2040 3830 3830

Vc(m/min) 160 300 300 160 300 300 160 300 300 160 300 300 160 300 300 160 300 300

Vf(mm/min) 2550 3590 3590 2040 2870 2870 1700 2400 3990 1280 1920 1920 1280 1920 1920 1020 1540 1540

fz(mm/t) 0.2 0.15 0.15 0.2 0.15 0.15 0.2 0.15 0.25 0.25 0.2 0.2 0.25 0.2 0.2 0.25 0.2 0.2

doc(mm) 0.2 0.2 0.1 0.25 0.25 0.1 0.3 0.3 0.1 0.8 0.8 0.2 1 1 0.2 1.25 1.25 0.2

woc(mm) 0.8 0.4 0.2 1 0.5 0.2 1.2 0.6 0.2 1.6 1.6 0.2 2 2 0.2 2.5 1.25 0.2


N(rpm) 4780 11150 11150 3830 8920 8920 3190 7440 7440 1920 4460 4460 1920 4460 4460 1530 3570 3570

Vc(m/min) 120 280 280 120 280 280 120 280 280 120 280 280 120 280 280 120 280 280

Vf(mm/min) 1920 3350 3350 1540 2680 2680 1280 2240 2240 960 1790 1790 960 1790 1790 770 1430 1430

fz(mm/t) 0.2 0.15 0.15 0.2 0.15 0.15 0.2 0.15 0.15 0.25 0.2 0.2 0.25 0.2 0.2 0.25 0.2 0.2

doc(mm) 0.2 0.2 0.1 0.25 0.25 0.1 0.3 0.3 0.1 0.8 0.8 0.2 1 1 0.2 1.25 1.25 0.2

woc(mm) 0.8 0.4 0.2 1 0.5 0.2 1.2 0.6 0.2 1.6 1.6 0.2 2 2 0.2 2.5 2.5 0.2


N(rpm) 4780 11150 11150 3830 8920 8920 3190 7440 7440 1600 4460 4460 1600 4460 4460 1280 3570 3570

Vc(m/min) 120 280 280 120 280 280 120 280 280 100 280 280 100 280 280 100 280 280

Vf(mm/min) 960 1120 1120 770 900 900 640 750 750 390 540 540 390 540 540 310 430 430

fz(mm/t) 0.1 0.05 0.05 0.1 0.05 0.05 0.1 0.05 0.05 0.12 0.06 0.06 0.12 0.06 0.06 0.12 0.06 0.06

doc(mm) 0.2 0.2 0.1 0.25 0.25 0.1 0.3 0.3 0.1 0.8 0.8 0.2 1 1 0.2 1.25 1.25 0.2

woc(mm) 0.8 0.2 0.2 1 0.25 0.2 1.2 0.3 0.2 1.6 0.8 0.2 2 1 0.2 2.5 1.25 0.2


N(rpm) 3190 8760 8760 2550 7010 7010 2130 5840 5840 1280 3510 3510 1280 3510 3510 1020 2810 2810

Vc(m/min) 80 220 220 80 220 220 80 220 220 80 220 220 80 220 220 80 220 220

Vf(mm/min) 640 880 880 510 710 710 430 590 590 310 430 430 310 430 430 250 340 340

fz(mm/t) 0.1 0.05 0.05 0.1 0.05 0.05 0.1 0.05 0.05 0.12 0.06 0.06 0.12 0.06 0.06 0.12 0.06 0.06

doc(mm) 0.2 0.2 0.1 0.25 0.25 0.1 0.3 0.3 0.1 0.8 0.8 0.2 1 1 0.2 1.25 1.25 0.2

woc(mm) 0.8 0.8 0.25 1 0.8 0.25 1.2 0.9 0.3 1.6 0.8 0.2 2 1 0.2 2.5 1.25 0.2

Cast Iron N(rpm) 6370 15130 15130 5100 12110 12110 4250 10090 10090 2550 6060 6060 2550 6060 6060 2040 4850 4850

Vc(m/min) 160 380 380 160 380 380 160 380 380 160 380 380 160 380 380 160 380 380

Vf(mm/min) 3830 6060 6060 3060 4850 4850 2550 4040 4040 1790 3640 3640 1790 3640 3640 1430 2910 2910

fz(mm/t) 0.3 0.2 0.2 0.3 0.2 0.2 0.3 0.2 0.2 0.35 0.3 0.3 0.35 0.3 0.3 0.35 0.3 0.3

doc(mm) 0.2 0.2 0.1 0.25 0.2 0.1 0.3 0.3 0.1 0.8 0.8 0.2 1 1 0.2 1.25 1.25 0.2

woc(mm) 0.8 0.4 0.2 1 0.4 0.2 1.2 0.6 0.2 1.6 1.6 0.2 2 2 0.2 2.5 2.5 0.2

IARPF / ARPF Cutting ConditionsMetric(continued)

�� © �005 Hitachi Tool Engineering, Ltd.phone no. 800.333.1514 www.hitachitoolusa.com

IARPF/ARPF + IABPF/ABPFIABPF / ABPFCutting ConditionsInch

φØ 5/16" or 8mm 3/8" or 10mm 1/2" or 12mm 5/8" or 16mm 3/4" or 20mm 1" or 25mm




N(rpm) 6370 12350 12350 5100 9240 11150 4250 7170 10090 2550 3350 7970 2550 3350 9080 2040 2680 8030

Vc(sfm) 525 1017 1017 525 951 1148 525 886 1247 525 689 1640 525 689 1870 525 689 2067

Vf(in/min) 100 389 195 80 291 176 67 226 159 50 132 189 50 132 286 40 106 316

fz(in/t) 0.008 0.016 0.008 0.008 0.016 0.008 0.008 0.016 0.008 0.001 0.020 0.012 0.001 0.020 0.016 0.001 0.020 0.020

doc(in) 0.008 0.004 0.004 0.001 0.006 0.004 0.012 0.008 0.004 0.031 0.024 0.004 0.039 0.028 0.004 0.049 0.035 0.004

woc(in) 0.031 0.031 0.001 0.039 0.031 0.001 0.047 0.035 0.012 0.063 0.043 0.014 0.079 0.059 0.016 0.098 0.071 0.020


N(rpm) 4780 10750 10750 3830 7650 9560 3190 6110 8760 1920 2390 6060 1920 2550 6690 1530 2040 5990

Vc(sfm) 394 886 886 394 787 984 394 755 1083 394 492 1247 394 525 1378 394 525 1542

Vf(in/min) 76 339 169 61 241 151 50 193 138 38 94 143 38 100 211 30 80 236

fz(in/t) 0.008 0.016 0.008 0.008 0.016 0.008 0.008 0.016 0.008 0.001 0.020 0.012 0.001 0.020 0.016 0.001 0.020 0.020

doc(in) 0.008 0.004 0.004 0.001 0.006 0.004 0.012 0.008 0.004 0.031 0.024 0.004 0.039 0.028 0.004 0.049 0.035 0.004

woc(in) 0.031 0.031 0.001 0.039 0.031 0.001 0.047 0.035 0.012 0.063 0.043 0.012 0.079 0.059 0.016 0.098 0.071 0.020


N(rpm) 3990 9160 9160 3190 6690 8290 2660 5310 7700 1600 2390 5580 1600 2390 6370 1280 1920 5740

Vc(sfm) 328 755 755 328 689 853 328 656 951 328 492 1148 328 492 1312 328 492 1476

Vf(in/min) 32 145 145 25 106 131 21 84 121 15 45 132 15 45 201 12 37 226

fz(in/t) 0.004 0.008 0.008 0.004 0.008 0.008 0.004 0.008 0.008 0.005 0.009 0.012 0.005 0.009 0.016 0.005 0.009 0.020

doc(in) 0.008 0.004 0.004 0.001 0.006 0.004 0.012 0.008 0.004 0.031 0.024 0.004 0.039 0.028 0.004 0.049 0.035 0.004

woc(in) 0.031 0.031 0.001 0.039 0.031 0.001 0.047 0.035 0.012 0.063 0.043 0.012 0.079 0.059 0.016 0.098 0.071 0.020


N(rpm) 7170 9160 9160 5740 7010 7650 4780 5580 6640 2870 3190 4460 2870 3190 5100 2300 2550 4590

Vc(sfm) 591 755 755 591 722 787 591 689 820 591 656 919 591 656 1050 591 656 1181

Vf(in/min) 57 145 145 45 111 121 38 88 105 27 61 106 27 61 161 22 48 181

fz(in/t) 0.004 0.008 0.008 0.004 0.008 0.008 0.004 0.008 0.008 0.005 0.009 0.012 0.005 0.009 0.016 0.005 0.009 0.020

doc(in) 0.004 0.008 0.008 0.001 0.006 0.004 0.012 0.008 0.004 0.031 0.024 0.004 0.039 0.028 0.004 0.049 0.035 0.004

woc(in) 0.031 0.031 0.001 0.039 0.031 0.001 0.047 0.035 0.012 0.063 0.043 0.012 0.079 0.059 0.016 0.098 0.071 0.020

Cast Iron N(rpm) 6370 12350 12350 5100 9240 11150 4250 7170 10090 2550 3350 7970 2550 3350 9080 2040 2680 8030

Vc(sfm) 525 1017 1017 525 951 1148 525 886 1247 525 689 1640 525 689 1870 525 689 2067

Vf(in/min) 151 584 195 121 437 263 100 339 239 71 185 189 71 185 286 56 148 316

fz(in/t) 0.012 0.024 0.008 0.012 0.024 0.012 0.012 0.024 0.012 0.014 0.028 0.012 0.014 0.028 0.016 0.014 0.028 0.020

doc(in) 0.008 0.004 0.004 0.001 0.006 0.004 0.012 0.008 0.004 0.031 0.024 0.004 0.039 0.028 0.004 0.049 0.035 0.004

woc(in) 0.031 0.031 0.001 0.039 0.031 0.001 0.047 0.035 0.012 0.063 0.043 0.012 0.079 0.059 0.016 0.098 0.071 0.020

PCA12MPTH08M

PCA12MPTH08M

PCA12MPTH08M

PCA12MPTH08M

PTH08M



φØ 5/16" or 8mm 3/8" or 10mm 1/2" or 12mm 5/8" or 16mm 3/4" or 20mm 1" or 25mm




N(rpm) 6370 12350 12350 5100 9240 11150 4250 7170 10090 2550 3350 7970 2550 3350 9080 2040 2680 8030

Vc(sfm) 525 1017 1017 525 951 1148 525 886 1247 525 689 1640 525 689 1870 525 689 2067

Vf(in/min) 100 389 195 80 291 176 67 226 159 50 132 189 50 132 286 40 106 316

fz(in/t) 0.008 0.016 0.008 0.008 0.016 0.008 0.008 0.016 0.008 0.001 0.020 0.012 0.001 0.020 0.016 0.001 0.020 0.020

doc(in) 0.008 0.004 0.004 0.001 0.006 0.004 0.012 0.008 0.004 0.031 0.024 0.004 0.039 0.028 0.004 0.049 0.035 0.004

woc(in) 0.031 0.031 0.001 0.039 0.031 0.001 0.047 0.035 0.012 0.063 0.043 0.014 0.079 0.059 0.016 0.098 0.071 0.020


N(rpm) 4780 10750 10750 3830 7650 9560 3190 6110 8760 1920 2390 6060 1920 2550 6690 1530 2040 5990

Vc(sfm) 394 886 886 394 787 984 394 755 1083 394 492 1247 394 525 1378 394 525 1542

Vf(in/min) 76 339 169 61 241 151 50 193 138 38 94 143 38 100 211 30 80 236

fz(in/t) 0.008 0.016 0.008 0.008 0.016 0.008 0.008 0.016 0.008 0.001 0.020 0.012 0.001 0.020 0.016 0.001 0.020 0.020

doc(in) 0.008 0.004 0.004 0.001 0.006 0.004 0.012 0.008 0.004 0.031 0.024 0.004 0.039 0.028 0.004 0.049 0.035 0.004

woc(in) 0.031 0.031 0.001 0.039 0.031 0.001 0.047 0.035 0.012 0.063 0.043 0.012 0.079 0.059 0.016 0.098 0.071 0.020


N(rpm) 3990 9160 9160 3190 6690 8290 2660 5310 7700 1600 2390 5580 1600 2390 6370 1280 1920 5740

Vc(sfm) 328 755 755 328 689 853 328 656 951 328 492 1148 328 492 1312 328 492 1476

Vf(in/min) 32 145 145 25 106 131 21 84 121 15 45 132 15 45 201 12 37 226

fz(in/t) 0.004 0.008 0.008 0.004 0.008 0.008 0.004 0.008 0.008 0.005 0.009 0.012 0.005 0.009 0.016 0.005 0.009 0.020

doc(in) 0.008 0.004 0.004 0.001 0.006 0.004 0.012 0.008 0.004 0.031 0.024 0.004 0.039 0.028 0.004 0.049 0.035 0.004

woc(in) 0.031 0.031 0.001 0.039 0.031 0.001 0.047 0.035 0.012 0.063 0.043 0.012 0.079 0.059 0.016 0.098 0.071 0.020


N(rpm) 7170 9160 9160 5740 7010 7650 4780 5580 6640 2870 3190 4460 2870 3190 5100 2300 2550 4590

Vc(sfm) 591 755 755 591 722 787 591 689 820 591 656 919 591 656 1050 591 656 1181

Vf(in/min) 57 145 145 45 111 121 38 88 105 27 61 106 27 61 161 22 48 181

fz(in/t) 0.004 0.008 0.008 0.004 0.008 0.008 0.004 0.008 0.008 0.005 0.009 0.012 0.005 0.009 0.016 0.005 0.009 0.020

doc(in) 0.004 0.008 0.008 0.001 0.006 0.004 0.012 0.008 0.004 0.031 0.024 0.004 0.039 0.028 0.004 0.049 0.035 0.004

woc(in) 0.031 0.031 0.001 0.039 0.031 0.001 0.047 0.035 0.012 0.063 0.043 0.012 0.079 0.059 0.016 0.098 0.071 0.020

Cast Iron N(rpm) 6370 12350 12350 5100 9240 11150 4250 7170 10090 2550 3350 7970 2550 3350 9080 2040 2680 8030

Vc(sfm) 525 1017 1017 525 951 1148 525 886 1247 525 689 1640 525 689 1870 525 689 2067

Vf(in/min) 151 584 195 121 437 263 100 339 239 71 185 189 71 185 286 56 148 316

fz(in/t) 0.012 0.024 0.008 0.012 0.024 0.012 0.012 0.024 0.012 0.014 0.028 0.012 0.014 0.028 0.016 0.014 0.028 0.020

doc(in) 0.008 0.004 0.004 0.001 0.006 0.004 0.012 0.008 0.004 0.031 0.024 0.004 0.039 0.028 0.004 0.049 0.035 0.004

woc(in) 0.031 0.031 0.001 0.039 0.031 0.001 0.047 0.035 0.012 0.063 0.043 0.012 0.079 0.059 0.016 0.098 0.071 0.020

IABPF / ABPFCutting ConditionsInch(continued)


IARPF/ARPF + IABPF/ABPFIABPF / ABPFCutting ConditionsMetric





N(rpm) 6370 12350 12350 5100 9240 11150 4250 7170 10090 2550 3350 7970 2550 3350 9080 2040 2680 8030

Vc(m/min) 160 310 310 160 290 350 160 270 380 160 210 500 160 210 570 160 210 630

Vf(mm/min) 2550 9880 4940 2040 7400 4460 1700 5740 4040 1280 3350 4790 1280 3350 7270 1020 2680 8030

fz(mm/t) 0.2 0.4 0.2 0.2 0.4 0.2 0.2 0.4 0.2 0.25 0.5 0.3 0.25 0.5 0.4 0.25 0.5 0.5

doc(mm) 0.2 0.1 0.1 0.25 0.15 0.1 0.3 0.2 0.1 0.8 0.6 0.1 1 0.7 0.1 1.25 0.9 0.1

woc(mm) 0.8 0.8 0.25 1 0.8 0.25 1.2 0.9 0.3 1.6 1.1 0.35 2 1.5 0.4 2.5 1.8 0.5


N(rpm) 4780 10750 10750 3830 7650 9560 3190 6110 8760 1920 2390 6060 1920 2550 6690 1530 2040 5990

Vc(m/min) 120 270 270 120 240 300 120 230 330 120 150 380 120 160 420 120 160 470

Vf(mm/min) 1920 8600 4300 1540 6120 3830 1280 4890 3510 960 2390 3640 960 2550 5360 770 2040 5990

fz(mm/t) 0.2 0.4 0.2 0.2 0.4 0.2 0.2 0.4 0.2 0.25 0.5 0.3 0.25 0.5 0.4 0.25 0.5 0.5

doc(mm) 0.2 0.1 0.1 0.25 0.15 0.1 0.3 0.2 0.1 0.8 0.6 0.1 1 0.7 0.1 1.25 0.9 0.1

woc(mm) 0.8 0.8 0.25 1 0.8 0.25 1.2 0.9 0.3 1.6 1.1 0.3 2 1.5 0.4 2.5 1.8 0.5


N(rpm) 3990 9160 9160 3190 6690 8290 2660 5310 7700 1600 2390 5580 1600 2390 6370 1280 1920 5740

Vc(m/min) 100 230 230 100 210 260 100 200 290 100 150 350 100 150 400 100 150 450

Vf(mm/min) 800 3670 3670 640 2680 3320 540 2130 3080 390 1150 3350 390 1150 5100 310 930 5740

fz(mm/t) 0.1 0.2 0.2 0.1 0.2 0.2 0.1 0.2 0.2 0.12 0.24 0.3 0.12 0.24 0.4 0.12 0.24 0.5

doc(mm) 0.2 0.1 0.1 0.25 0.15 0.1 0.3 0.2 0.1 0.8 0.6 0.1 1 0.7 0.1 1.25 0.9 0.1

woc(mm) 0.8 0.8 0.25 1 0.8 0.25 1.2 0.9 0.3 1.6 1.1 0.3 2 1.5 0.4 2.5 1.8 0.5


N(rpm) 7170 9160 9160 5740 7010 7650 4780 5580 6640 2870 3190 4460 2870 3190 5100 2300 2550 4590

Vc(m/min) 180 230 230 180 220 240 180 210 250 180 200 280 180 200 320 180 200 360

Vf(mm/min) 1440 3670 3670 1150 2810 3060 960 2240 2660 690 1540 2680 690 1540 4080 560 1230 4590

fz(mm/t) 0.1 0.2 0.2 0.1 0.2 0.2 0.1 0.2 0.2 0.12 0.24 0.3 0.12 0.24 0.4 0.12 0.24 0.5

doc(mm) 0.1 0.2 0.2 0.25 0.15 0.1 0.3 0.2 0.1 0.8 0.6 0.1 1 0.7 0.1 1.25 0.9 0.1

woc(mm) 0.8 0.8 0.25 1 0.8 0.25 1.2 0.9 0.3 1.6 1.1 0.3 2 1.5 0.4 2.5 1.8 0.5

Cast Iron N(rpm) 6370 12350 12350 5100 9240 11150 4250 7170 10090 2550 3350 7970 2550 3350 9080 2040 2680 8030

Vc(m/min) 160 310 310 160 290 350 160 270 380 160 210 500 160 210 570 160 210 630

Vf(mm/min) 3830 14820 4940 3060 11090 6690 2550 8610 6060 1790 4690 4790 1790 4690 7270 1430 3760 8030

fz(mm/t) 0.3 0.6 0.2 0.3 0.6 0.3 0.3 0.6 0.3 0.35 0.7 0.3 0.35 0.7 0.4 0.35 0.7 0.5

doc(mm) 0.2 0.1 0.1 0.25 0.15 0.1 0.3 0.2 0.1 0.8 0.6 0.1 1 0.7 0.1 1.25 0.9 0.1

woc(mm) 0.8 0.8 0.25 1 0.8 0.25 1.2 0.9 0.3 1.6 1.1 0.3 2 1.5 0.4 2.5 1.8 0.5

PCA12MPTH08M PCS08M

PCA12MPTH08M PCS08M

PTH08M PCS08M

PTH08M PCS08M

PTH08M PCS08M







N(rpm) 6370 12350 12350 5100 9240 11150 4250 7170 10090 2550 3350 7970 2550 3350 9080 2040 2680 8030

Vc(m/min) 160 310 310 160 290 350 160 270 380 160 210 500 160 210 570 160 210 630

Vf(mm/min) 2550 9880 4940 2040 7400 4460 1700 5740 4040 1280 3350 4790 1280 3350 7270 1020 2680 8030

fz(mm/t) 0.2 0.4 0.2 0.2 0.4 0.2 0.2 0.4 0.2 0.25 0.5 0.3 0.25 0.5 0.4 0.25 0.5 0.5

doc(mm) 0.2 0.1 0.1 0.25 0.15 0.1 0.3 0.2 0.1 0.8 0.6 0.1 1 0.7 0.1 1.25 0.9 0.1

woc(mm) 0.8 0.8 0.25 1 0.8 0.25 1.2 0.9 0.3 1.6 1.1 0.35 2 1.5 0.4 2.5 1.8 0.5


N(rpm) 4780 10750 10750 3830 7650 9560 3190 6110 8760 1920 2390 6060 1920 2550 6690 1530 2040 5990

Vc(m/min) 120 270 270 120 240 300 120 230 330 120 150 380 120 160 420 120 160 470

Vf(mm/min) 1920 8600 4300 1540 6120 3830 1280 4890 3510 960 2390 3640 960 2550 5360 770 2040 5990

fz(mm/t) 0.2 0.4 0.2 0.2 0.4 0.2 0.2 0.4 0.2 0.25 0.5 0.3 0.25 0.5 0.4 0.25 0.5 0.5

doc(mm) 0.2 0.1 0.1 0.25 0.15 0.1 0.3 0.2 0.1 0.8 0.6 0.1 1 0.7 0.1 1.25 0.9 0.1

woc(mm) 0.8 0.8 0.25 1 0.8 0.25 1.2 0.9 0.3 1.6 1.1 0.3 2 1.5 0.4 2.5 1.8 0.5


N(rpm) 3990 9160 9160 3190 6690 8290 2660 5310 7700 1600 2390 5580 1600 2390 6370 1280 1920 5740

Vc(m/min) 100 230 230 100 210 260 100 200 290 100 150 350 100 150 400 100 150 450

Vf(mm/min) 800 3670 3670 640 2680 3320 540 2130 3080 390 1150 3350 390 1150 5100 310 930 5740

fz(mm/t) 0.1 0.2 0.2 0.1 0.2 0.2 0.1 0.2 0.2 0.12 0.24 0.3 0.12 0.24 0.4 0.12 0.24 0.5

doc(mm) 0.2 0.1 0.1 0.25 0.15 0.1 0.3 0.2 0.1 0.8 0.6 0.1 1 0.7 0.1 1.25 0.9 0.1

woc(mm) 0.8 0.8 0.25 1 0.8 0.25 1.2 0.9 0.3 1.6 1.1 0.3 2 1.5 0.4 2.5 1.8 0.5


N(rpm) 7170 9160 9160 5740 7010 7650 4780 5580 6640 2870 3190 4460 2870 3190 5100 2300 2550 4590

Vc(m/min) 180 230 230 180 220 240 180 210 250 180 200 280 180 200 320 180 200 360

Vf(mm/min) 1440 3670 3670 1150 2810 3060 960 2240 2660 690 1540 2680 690 1540 4080 560 1230 4590

fz(mm/t) 0.1 0.2 0.2 0.1 0.2 0.2 0.1 0.2 0.2 0.12 0.24 0.3 0.12 0.24 0.4 0.12 0.24 0.5

doc(mm) 0.1 0.2 0.2 0.25 0.15 0.1 0.3 0.2 0.1 0.8 0.6 0.1 1 0.7 0.1 1.25 0.9 0.1

woc(mm) 0.8 0.8 0.25 1 0.8 0.25 1.2 0.9 0.3 1.6 1.1 0.3 2 1.5 0.4 2.5 1.8 0.5

Cast Iron N(rpm) 6370 12350 12350 5100 9240 11150 4250 7170 10090 2550 3350 7970 2550 3350 9080 2040 2680 8030

Vc(m/min) 160 310 310 160 290 350 160 270 380 160 210 500 160 210 570 160 210 630

Vf(mm/min) 3830 14820 4940 3060 11090 6690 2550 8610 6060 1790 4690 4790 1790 4690 7270 1430 3760 8030

fz(mm/t) 0.3 0.6 0.2 0.3 0.6 0.3 0.3 0.6 0.3 0.35 0.7 0.3 0.35 0.7 0.4 0.35 0.7 0.5

doc(mm) 0.2 0.1 0.1 0.25 0.15 0.1 0.3 0.2 0.1 0.8 0.6 0.1 1 0.7 0.1 1.25 0.9 0.1

woc(mm) 0.8 0.8 0.25 1 0.8 0.25 1.2 0.9 0.3 1.6 1.1 0.3 2 1.5 0.4 2.5 1.8 0.5

IABPF / ABPFCutting ConditionsMetric(continued)

AISI JIS German DIN

Soft, Low-carbon steelsLow carbon and purely ferritic mild steels

1015 S15C 1.040 C151022 SMnC420 1.113 GS-20Mn51025 S25C 1.116 Ck25

Free cutting steels(not including stainless steels)

1213 SUM22 1.072 9SMn2812L13 SUM22L 1.072 9SMnPb2812L14 - 1.074 9SMnPb36

Machine steels and carbon steelsLow to medium carbon content (<0.5%C)

1015 S15CK 1.114 Ck151043 S45C 1.050 C451055 S55C 1.054 C551042 S45C 1.119 Ck45

High carbon and low-alloy steelsMedium-hard quenching and tempering steelsHigh carbon steels (>0.5%C)Ferritic and martensitic stainless steels

1045 - 1.173 C45W1042 S45C 1.119 Ck451064 S58C 1.122 Ck601070 - 1.123 Ck671080 - 1.125 Ck751095 SUP4 1.127 Ck1019254 - 1.090 55Si71335 SMn438(H) 1.117 36Mn55120 - 1.084 St52-34130 SCM420 1.722 25CrMo44135 SCM432 1.233 35CrMo44140 SCM440 1.723 42CrMo45140 SCr440 1.705 42Cr418620 SNCM220(H) 1.652 21NiCrMo2403 SUS403 1.400 X6Cr13410S SUS410S 1.400 X7Cr14410 SUS410 1.401 G-X10Cr13P4 - 1.234 X6CrMo4405 SUS405 1.472 X6CrAl13430 SUS430 1.402 X6Cr17434 SUS434 1.411 X6CrMo17416 - 1.401 X12CrS13430F SUS430F 1.410 X12CrMoS17409 SUH409 1.451 X5CrTi12430Ti - 1.451 X6CrTi17

Normal tool steelsHarder quenching and tempering steelsMartensitic stainless steels

420 SUS420J1 1.402 X42Cr13P20+1 - 1.231 40CrMnMoS864340 SNCM447 1.658 34CrNiMo6431 SUS431 1.406 X20CrNi172440B SUS440B 1.411 X90CrMoV18

Difficult to machine tool steelsHigh-alloy, high-hardness steelsMartensitic stainless steels

P3 SKD1 1.208 X210Cr12P20 - 1.231 40CrMnMo7H13 SKD61 1.234 X40CrMoV51A2 SKD12 1.236 X100CrMoV51D2 - 1.238 X155CrMoV121M2 SKH9 1.334 S6/5/2M7 - 1.335 S2/9/2446 SUH446 1.475 X18CrN28422 - 1.494 X20CrMoWV121429 - - X10CrNi15440C SUS440C 1.413 X105CrMo17

Difficult to machine high-strength, high-hardness steelsEasy-cutting stainless steelsFree-cutting stainless steels Calcium-treated stainless steels

A12875 SCMnH1 1.340 G-X120mN12304 SUS304 1.430 X5CrNi1810303 SUS303 1.431 X10CrNiS189304L SUS304L 1.431 X2CrNi1810305 SUS305 1.431 X8CrNi1812302 SUS302 - X12CrNi189301 SUS301 1.431 X12CrNi177


IARPF/ARPF + IABPF/ABPF Material Cross ReferenceSteels and Iron

AISI JIS German DIN

Moderately difficult to machine stainless steelsAustenitic and duplex stainless steels

316 SUS316 1.444 X5CrNiMo17133316Ti - 1.457 X8CrNiMoTi17122316 SUS316 1.440 X5CrNiMo17122316L SUS316L 1.440 X2CrNiMo17132316Ti - 1.457 X6CrNiMoTi17122304LN SUS304LN 1.431 X2CrNiN1810

Difficult to machine stainless steelsAustenitic and duplex stainless steels

202 SUS202 1.437 X3CrMnNiN1887660 - 1.498 X5NiCrTi2515330 SUH330 1.486 X12NiCrSi16309 - - X15CrNi2313310 - 1.484 X15CrNiSi2520

Extremely difficult to machine stainless steelsAustenitic and duplex stainless steelsModerately hard cast ironGray iron

316LN SUS316LN 1.441 X2CrNiMoN1713260/40/18 FCD400 0.704 GGG-4060/40/18 - 0.704 GGG-40.3A220-40010 FCMP440/490 0.815 GTS-45-06A220-50005 FCMP540 0.816 GTS-55-04

Low-alloy cast ironMalleable cast iron, SG iron

A48-30B FC200 0.602 GG-20A48-40B FC250 0.603 GG-25A436 Type 2 - 0.666 GGL-NiCr20265/45/12 FCD500 0.705 GGG-5080/55/06 FCD600 0.706 GGG-60A220-50005 FCMP540 0.816 GTS-55-04A220-70003 FCMP590 0.817 GTS-65-02

Moderately difficult to machine alloy cast ironModerately difficult to machine malleable iron, SG iron

A48-45B FC300 0.603 GG-30100/70/03 FCD700 0.707 GGG-70A43D2 - 0.766 GGG-NiCr202A220-70003 FCMP590 0.817 GTS-65-02A220-80002 FCMP690 0.817 GTS-70-02A220-90001 - 0.817 GTS-70-02

Difficult to machine high-alloy cast ironDifficult to machine malleable cast iron, SG iron

A48-50B FC35 0.604 GG-35A48-60B FC40 0.604 GG-40A220-90001 FCMP690 0.817 GTS-70-02


IARPF/ARPF + IABPF/ABPF Material Cross ReferenceSteels and Iron

DISTRIBUTED BY

Hitachi Metals America, LTD.Material Trading Division, Cutting Tools Group41800 W. Eleven Mile Road, Suite 100Novi, MI 48375

Tel. 800.333.1514Fax 248.465.6020email [email protected]

© 2005 Hitachi Tool Engineering, Ltd. 1st Edition Printed in USA

arpf cutter

Business

corner radius inserts

high heat resistance

metric inserts

corner radius styles

long tool life

xarpf10s1221010 inserts

hitachi tool engineering

metric ball nose