www.boccierigolf.com

1.888.788.8374

The essence of weighted design is the equipment’s ability to improve a golfer’s

mechanics. By adding weight in strategic areas to manipulate the balance point, Boccieri

Golf is creating fundamentally different equipment unique to the golf industry. If we can’t

create a product that will improve the golfer, we simply won’t make it. The new Control

Series products will change the way you play the game.

Mastery of Weighted Design

Take Control. Stephen Boccieri

Putting Stroke Innovation | Maximum Consistency

Pendulum StrokeHeavier Mass: The Heavy Putter’s overall weight engages the body’s larger stable muscles, resulting in a more consistent pendulum stroke.

Stable BodyCore Center of Gravity: The Heavy Putter’s center of gravity is closer to the human body’s core CG, resulting in greater stroke stability.

Passive WristsHigher Center of Gravity: The Heavy Putter’s higher center of gravity reduces force on the wrists.

The Heavy Putter has a 75 % higher balance point than conventional putters, which leads to a more consistent release through impact. This eliminates excessive hand and wrist action, and promotes a smoother stroke, more solid contact, and better distance control.

Benefits

All Boccieri Golf clubs are designed with one specific criteria - to improve a golfer’s consistency. The design of the Control Series golf clubs incorporates an increased head weight to maximize force at impact and an exclusive backweight system installed in the grip end of the shaft to raise the balance point for increased club head speed. These perfectly balanced golf clubs improve body mechanics resulting in greater distance and control.

Full-Swing Innovation | Maximum Control

Back swing forward swing

3

42

1

5

6

7

Better on planetakeaway

Address

Set handsmore quickly Smoother

transition

Holds angle of retention longer

Maximum ForceHigher Club Head SpeedSquare Face

Full extensionthrough impact

Balanced finish

60° Lie angle45” LengthHigh gloss Black finish6-4 Titanium face and Bodyaldila nVs shaft65 gram shaft weight

3.6’ Torque0.350” Tip diameter50 gram Backweight systemregular or stiff flexright Hand only

Choose from 9° or 10° LoftContact Boccieri Golf for additional shaft options

Heavy DriverThe new Heavy driver is cast 6-4 titanium for exacting specifications. weight has been distributed in strategic areas to make it one of the highest Moi drivers on the market and to give it a perfectly aligned cg to the middle of the hitting surface which creates a larger sweet spot.

Dimpled-Face TechnologyThis proprietary internal dimple design was developed to maximize the cor or cT, while maintaining the necessary strength for durability. it also reduces the weight of the face to allow for better weight distribution throughout the head.

Heavy HybridHeavy Wood

3 Wood 15° Loft56° Lie Angle42.75” LengthHigh Gloss Black Finish455 Carpenter Steel Face17-4 Stainless Steel BodyAldila NVS Shaft75 Gram Shaft Weight3.2’ Torque0.350” Tip Diameter50 Gram Backweight SystemRegular or Stiff FlexRight Hand Only

5 Wood 19° Loft56.5° Lie Angle42.25” LengthHigh Gloss Black Finish455 Carpenter Steel Face17-4 Stainless Steel BodyAldila NVS Shaft75 Gram Shaft Weight3.2’ Torque0.350” Tip Diameter50 Gram Backweight SystemRegular or Stiff FlexRight Hand Only

20 Degree 3-Iron Replacement20° Loft58.5° Lie Angle40” LengthHigh Gloss Black Finish455 Carpenter Steel Face17-4 Stainless Steel BodyAldila NVS Hybrid Shaft85 Gram Shaft Weight2.8’ Torque0.370” Tip Diameter50 Gram Backweight SystemRegular or Stiff FlexRight Hand Only

23 Degree 4-Iron Replacement23° Loft59° Lie Angle39.50” LengthHigh Gloss Black Finish455 Carpenter Steel Face17-4 Stainless Steel BodyAldila NVS Hybrid Shaft85 Gram Shaft Weight2.8’ Torque0.370” Tip DiameterRegular or Stiff Flex50 Gram Backweight SystemRight Hand Only

54115208

54’ Loft - 11’ BounceNon-Glare Satin Finish

CNC Milled Face & GroovesMaximum Groove Width

8620 Carbon Steel65 Gram Backweight System

Right Hand Only

52° Loft - 8° BounceNon-Glare Satin Finish

CNC Milled Face & GroovesMaximum Groove Width

8620 Carbon Steel65 Gram Backweight System

Right or Left Hand

60045808

60° Loft - 4° BounceLower Bounce for Firmer Conditions

Non-Glare Satin FinishCNC Milled Face & Grooves

Maximum Groove Width8620 Carbon Steel

65 Gram Backweight SystemRight Hand Only

58’ Loft - 8’ BounceNon-Glare Satin Finish

CNC Milled Face & GroovesMaximum Groove Width

8620 Carbon Steel65 Gram Backweight System

Right Hand Only

5611

56° Loft - 11° BounceNon-Glare Satin Finish

CNC Milled Face & GroovesMaximum Groove Width

8620 Carbon Steel65 Gram Backweight System

Right or Left Hand

6007

60° Loft - 7° BounceHigher Bounce for Softer Conditions

Non-Glare Satin FinishCNC Milled Face & Grooves

Maximum Groove Width8620 Carbon Steel

65 Gram Backweight SystemRight or Left Hand

Heavy WedgeHeavy Irons

3-Iron thru Pitching Wedge availablePolished Mirror Finish17-4 Stainless Steel HeadTrue Temper GS-95 Steel Shaft is StandardTrue Temper Dynamic Gold Steel Shaft is OptionalParallel Hosel BoreRegular or Stiff FlexRight Hand Only

Iron Number

Length

Loft

Lie

Offset (mm)

Bounce

SS Material

Backweight

3

38.75”

21

60

4.26

1.5

17-4

50g

4

38.25”

24

60.5

3.87

2

17-4

50g

5

37.75”

27

61

3.49

2.5

17-4

50g

6

37.25”

30

61.5

3.24

3

17-4

50g

7

36.75”

34

62

2.98

4

17-4

50g

8

36.25”

38

62.5

2.73

5

17-4

50g

9

35.75”

42

63

2.6

6

17-4

50g

PW

35.5”

46

63.5

2.48

7

17-4

50g 2011 Wedges are USGAand PGA Tour Conforming

375 GRAM HeAD WeIGHT 65 GRAM BACk WeIGHTING SySTeM

N1-L Blade Head DesignCenter ShaftZero Shaft Offset3° Loft 70° LieToe Droop DesignBlack PVD FinishCNC Milled FaceRight or Left Hand

M4-L Blade Head DesignHeel Mounted ShaftHalf Shaft Offset3° Loft 70° LieToe Droop DesignBlack PVD FinishCNC Milled FaceRight Hand Only

Q2-L Blade Head DesignPlumber’s Neck HoselFull Shaft Offset3° Loft 70° LieToe Droop DesignBlack PVD FinishCNC Milled FaceRight or Left Hand

L3-LD3-L Mallet Head DesignDouble Bend ShaftHalf Shaft Offset3° Loft 70° LieFace BalancedBlack PVD FinishCNC Milled FaceRight Hand Only

Mallet Head DesignDouble Bend ShaftHalf Shaft Offset3° Loft 70° LieFace BalancedBlack PVD FinishCNC Milled FaceRight Hand Only

For Custom, Standard, Belly & Long options, visit www.boccierigolf.com

LITE-WEIGHTHeavy Putter

Blade Head DesignPlumber’s Neck HoselFull Shaft Offset3° Loft 70° LieFace BalancedBlack PVD FinishCNC Milled FaceRight or Left Hand

C2-M D1-M Mallet Head DesignCenter ShaftZero Shaft Offset3° Loft 70° LieFace BalancedBlack PVD FinishCNC Milled FaceRight Hand Only

D3-M Mallet Head DesignDouble Bend ShaftHalf Shaft Offset3° Loft 70° LieFace BalancedBlack PVD FinishCNC Milled FaceRight Hand Only

H1-M Mallet Head DesignCenter ShaftZero Shaft Offset3° Loft 70° LieFace BalancedBlack PVD or Bronze FinishCNC Milled FaceRight Hand Only

400 GRAM HeAD WeIGHT 200 GRAM BACk WeIGHTING SySTeM

For Custom, Standard, Belly & Long options, visit www.boccierigolf.com

J2-M Blade Head DesignPlumber’s Neck HoselFull Shaft Offset3° Loft 70° LieFace BalancedBlack PVD FinishCNC Milled FaceRight Hand Only

Blade Head DesignPlumber’s Neck HoselFull Shaft Offset3° Loft 70° LieToe Droop DesignBlack PVD or Bronze FinishCNC Milled FaceRight Hand Only

K4-M L3-M Mallet Head DesignDouble Bend ShaftHalf Shaft Offset3° Loft 70° LieFace BalancedBlack PVD or Bronze FinishCNC Milled FaceRight Hand Only

P3-M Mallet Head DesignDouble Bend ShaftHalf Shaft Offset3° Loft 70° LieFace BalancedBlack PVD FinishCNC Milled FaceRight Hand Only

Q2-M Blade Head DesignPlumber’s Neck HoselFull Shaft Offset3° Loft 70° LieToe Droop DesignBlack PVD or Bronze FinishCNC Milled FaceRight Hand Only

400 GRAM HeAD WeIGHT 200 GRAM BACk WeIGHTING SySTeM MID -WEIGHTMID -WEIGHT

For Custom, Standard, Belly & Long options, visit www.boccierigolf.com

Q2-MT

R3-MT

Blade Head DesignPlumber’s Neck HoselFull Shaft Offset3° Loft 70° LieToe Droop DesignPVD Bright Silver FinishCNC Milled Body and FaceRight Hand Only

Mallet Head DesignDouble Bend ShaftHalf Shaft Offset3’ Loft 70’ LieFace BalancedPVD Bright Silver FinishCNC Milled Body and FaceRight Hand Only

H1-M Mallet Head DesignCenter ShaftZero Shaft Offset3° Loft 70° LieFace BalancedBlack PVD or Bronze FinishCNC Milled FaceRight Hand Only

Blade Head DesignPlumber’s Neck HoselFull Shaft Offset3° Loft 70° LieToe Droop DesignBlack PVD or Bronze FinishCNC Milled FaceRight Hand Only

K4-M

L3-M Mallet Head DesignDouble Bend ShaftHalf Shaft Offset3° Loft 70° LieFace BalancedBlack PVD or Bronze FinishCNC Milled FaceRight Hand Only

Q2-M Blade Head DesignPlumber’s Neck HoselFull Shaft Offset3° Loft 70° LieToe Droop DesignBlack PVD or Bronze FinishCNC Milled FaceRight Hand Only

400 GRAM HeAD WeIGHT 200 GRAM BACk WeIGHTING SySTeM 400 GRAM HeAD WeIGHT 200 GRAM BACk WeIGHTING SySTeM MID -WEIGHT TOURMID -WEIGHT BRONZE

For Custom, Standard, Belly & Long options, visit www.boccierigolf.comFor Custom, Standard, Belly & Long options, visit www.boccierigolf.com

L3-H Mallet Head DesignDouble Bend ShaftHalf Shaft Offset3° Loft 70° LieFace BalancedBlack PVD FinishCNC Milled FaceRight Hand Only

Q2-H Blade Head DesignPlumber’s Neck HoselFull Shaft Offset3° Loft 70° LieToe Droop DesignBlack PVD FinishCNC Milled FaceRight Hand Only

B3-M Mallet Head DesignDouble Bend ShaftHalf Shaft Offset3.5° Loft 72° LieFace BalancedMatte Gray FinishCNC Milled FaceRight or Left Hand

B1 Mallet Head DesignCenter ShaftZero Shaft Offset3.5° Loft 72° LieFace Balanced100 % CNC MilledRight or Left Hand

465 GRAM HeAD WeIGHT 250 GRAM BACk WeIGHTING SySTeMHEAV Y-WEIGHT

For Custom, Standard, Belly & Long options, visit www.boccierigolf.com