biolab - mylabdanismanlik.commylabdanismanlik.com/453,biolab-genel-katalog-2014.pdfbiolab is built...

High Quality Solutionsbiolab

biolab established in 1987 as a group within United Engineering Co. Ltd. and starting from 1992 Biolab became an independent company as a leading supplier and manufacturer of high quality laboratory equipments.

biolab is built on a lifetime’s experience in the field which gives high priority to technical expertise and customer support for all our products.

biolab now is a leading supplier in the field of Fuels, Oils and Biotechnology laboratory instruments including; Fuel & Oil Analysis Spectrometers, Oil Condition Monitoring Systems, Turn-Key Fuel & Oil Labs, Predictive Maintenance Labs, Turn-Key Mobile Fuel & Oil Lab, On-Site Environmental Fuel & Oil Testing Kits.

biolab provides full in-land at site warranty, technical service and support for all instruments before and after sales, supported through highly qualified technical engineers who follow directly the customer technical demands.

Fuel & Oil Elemental Analysis Systems...............................

Oil Degradation & Contamination Monitoring...................

Particle Counting & Shape Imaging....................................

Viscosity Measurement......................................................

Industrial Tribology Laboratory..........................................

Distillation Analysis............................................................

Gasoline & Diesel Analyzers...............................................

Vapor Pressure Analyzers...................................................

Flash Point Testers..............................................................

Sulfur Analyzers..................................................................

Density Meters...................................................................

Color Measurement...........................................................

Water Content Analysis......................................................

TAN / TBN Analysis.............................................................

Analyzers for Cold Properties.............................................

Oxidation, Corrosion & Rust Testing...................................

Foam Testing......................................................................

Refractometers...................................................................

Asphalt Analyzers...............................................................

Other Petroluem Products.................................................

Mobile Fuel & Oil Laboratory.............................................

On-Site Environmental Oil & Fuel Testing..........................

416222862668494100106116120124130136142150156160166174178

Spectroil M/F , Fuel AnalysisSpectroil M/C , Oil AnalysisSpectroil M/N, Oil Analysis (Military version)Spectroil M/F/Cynan SW, Fuel & Oil AnalysisSpectroil Q 100 Oil & Fuel Analysis SpectrometerAccessories & ConsumablesHD Maxine-Multi-Element Top Trace Metal AnalyzerClora Bench-Top Total Chlorine AnalyzerPhoebe Bench-Top Phosphorous AnalyzerSignal Bench-Top Silicon Analyzer

Fuel & Oil Elemantal Analysis System

Conforms to ASTM D6728

Spectroil M/FFuel Analysis Spectrometer

Features• Conforms to ASTM D6728 requirements.

• Bench-top and transportable.

• No sample preparation for typical fuels.

• Simple to operate without special training or background.

• Standard and readily available consumables.

• Requires no special utilities or gases, only AC power.

• A heat exchanger is used for cooling, preventing ingression of dust, sand, oil, or moisture to the sealed electronics and optics.

• Optional Turbine Cleaning Water and Injection Water Analysis.

• Capable of analyzing naptha or highly volatile fuels with a sample preparation kit

• Optional Sulfur Analysis Capability.

• Windows® Operating System

Advantages• Fast and simultaneous analysis of all key metals in fuel samples.

• One 30 second “burn” measures all the sub-ppm levels of metals such as Na, K, Li, V, Mg, Pb, Ni, Ca, Mn, Cr, Si, Fe, Al, Cu, and Zn.

• Capable of analyzing fuels from distillates to heavy residuals.

• Continuously available for immediate analysis of fuel samples.

Applications• Fuel quality analysis for liquid fired gas turbines and diesel engines at:

- Electric power generation stations

- Fuel treatments systems

- Shipboard propulsion systems

• Qualification of fuel treatment system effectiveness

6 www.biolab.com.tr


Spectroil M/FFuel Analysis Spectrometer

Features• Conforms to ASTM D6728 requirements.

• Bench-top and transportable.

• No sample preparation for typical fuels.

• Simple to operate without special training or background.

• Standard and readily available consumables.

• Requires no special utilities or gases, only AC power.

• A heat exchanger is used for cooling, preventing ingression of dust, sand, oil, or moisture to the sealed electronics and optics.

• Optional Turbine Cleaning Water and Injection Water Analysis.




Advantages• Fast and simultaneous analysis of all key metals in fuel samples.

• One 30 second “burn” measures all the sub-ppm levels of metals such as Na, K, Li, V, Mg, Pb, Ni, Ca, Mn, Cr, Si, Fe, Al, Cu, and Zn.

• Capable of analyzing fuels from distillates to heavy residuals.

• Continuously available for immediate analysis of fuel samples.

Applications• Fuel quality analysis for liquid fired gas turbines and diesel engines at:

- Electric power generation stations

- Fuel treatments systems

- Shipboard propulsion systems

• Qualification of fuel treatment system effectiveness


Spectroil M/CFuel Analysis Spectrometer

Applications• Commercial Laboratories

• Oil Companies

• Railroads

• Airlines

• Public Transportation Companies

• Electric Power Generation Companies

• Mines

• Refineries

• Construction Equipment Dealers

• Chemical Processors

• Steel Mills

• Manufacturing Plants

• Marine Fleets

• Military

Features• Conforms to ASTM D6595 Method

• Meets stringent Department of Defense requirements (JOAP)

• No sample preparation

• 30 second analysis time

• Bench-top and transportable

• Analyzes up to 32 elements simultaneously

• Always ready to analyze samples

• Simple to operate without special training or background

• Standard and readily available consumables

• Environmentally sealed

• Requires no special utilities or gases, only AC power


• Optional Large Particle Analysis Capability

• Optional Robotic Sample Changer

• Optional Sulfur Analysis Capability

Benefits of Oil Analysis• Reduce maintenance costs

• Reduce unexpected downtime

• Increase equipment availability

• Improve safety

[email protected]


Spectroil M/N (Military Version)Oil Analysis Spectrometer

Applications• Military

• Commercial Laboratories

• Railroads

• Airlines



• Mines

• Refineries



• Steel Mills


• Marine Fleets

• Oil Companies

Features• Conforms to ASTM D6595 requirements









• Environmentally sealed




• Optional Robotic Sample Changer

• Optional Sulfur Analysis Capability

• Optional Coolant Analysis Capability

Benefits of Oil Analysis• Reduce maintenance costs



• Improve safety

8 www.biolab.com.tr

Conforms to ASTM D6728 & D6595

Spectroil M/F/Cynan Fuel & Oil Analysis Spectrometer

Applications• Fuel quality analysis for liquid fired gas turbines and diesel engines at - Electric power generation stations - Qualification of fuel treatment system effectiveness

• Rapid analysis of wear metals, contaminants and additives in lubricants, hydraulic fluids, and coolants - Predictive Maintenance By Used Oil Analysis - Commercial Laboratories, Oil Companies,

Electrical Power Generation Plants, Mines, Refineries, Construction Equipments, Chemical Processors, Manufacturing Plants, Steel Mills, Military

Features• Conforms to ASTM D6728 for Fuels and ASTM D6595 for Oils.



• No sample preparation for typical fuels and oils






• Optional Turbine Cleaning Water And Injection Water Analysis





Advantages of Fuel & Oil Analysis• Fast and simultaneous analysis of all key metals in fuel and oil samples.

• One 30 second “burn” measures all the sub-ppm levels of metals.

• Capable of analyzing fuels from distillates to heavy residuals to lubricating oils.

• Continuously available for immediate analysis of fuel and oil samples.

[email protected]

Spectroil Q100 Oil & Fuel Analysis Spectrometer

Applications• Commercial Laboratories

• Oil Companies

• Railroads

• Airlines



• Mines

• Refineries



• Steel Mills


• Marine Fleets

Features• Conforms to ASTM D6595 requirements



• Bench-top and transportable, small footprint






• Controlled by an External Computer


• Optional Coolant Analysis Capability Benefits of Oil Analysis• Reduce maintenance costs



• Improve safety


10 www.biolab.com.tr

Large Particle AnalysisAutomated Rotrode Filter Spectroscopy (A-RFS) is a device that uses the rotrode filter spectroscopy technique to enable the Spectroil M/C-W or Spectroil M/N-W to detect and quantify large wear and contaminant particles in a used oil sample.

AutomationThe Double Disc Rapid Robot (D2R2) automates the operation of the Spectroil M/C-W or Spectroil M/N-W. It is an innovative design that consists of two parts, a robot to exchange consumables and an automatic sample changer. Up to 80 used oil samples can be analyzed per hour.

“Burnt Oil” AnalysisThe Tandem Conductivity Technique (TCT) is a hardware and software option that provides the Spectroil M/N-W with the additional capability of simultaneous measurement of oil thermal breakdown (burnt oil) along with the normal analysis. Analytical data is in COBRA units.

Transit CaseThe Spectroil transit case is a complete oil analysis laboratory in a deployable container. It features a shock mounted cradle designed for the Spectroil and its accessories and consumables. A gas cylinder mechanism is used to rise the spectrometer to a comfortable operating height (variable).

Database SoftwareThe PINPOINT software is a database program and report generator based on the JOAP operating requirements. The program has the capability to store, sort, retrieve, do statistical analysis and set alarms for the data.

Accessories & Consumablesfor Spectroil M Units

[email protected]

HD Maxine Multi-Element Trace Metal Analyzer

Application Areas• Contaminants, Additives, Wear Metals.

• Refineries, Lubricant Plants, Engine Service Centers.

• Crudes and downstream hydrocarbons, lubricants and used oil.

• Elements: S, Cl, P, K, Ca, V, Mn, Fe, Co, Ni, Cu, Zn, Hg, As, Pb, Se.

Features and Benefits• Fits on any bench.

• Plug-it-in and measure: no additional utilities required.

• Touch Screen user interface.

• Utilizes ACCU-CELL pre-assembled and pre-vented sample cups for enhanced precision, extreme ease-of-use and enhanced productivity.

• No sample dilution, conversion gases, heating elements, quartz tubes or columns.

• Air-cooled excitation tube.

ACCU-FLOW Technology

• Eliminates particulate settling effects• Simple design, optimized for everyday use• Available add-on for all M-series analyzers

ACCU-CELL Sample Cups

• No assembly of separate film & cup components• Pre-vented sample cups• Eliminates sample & cup contamination• 1 ml pipette will fill the cup


Compliant with ASTM D7536

Clora Bench-Top Total Chlorine Analyzer

Application Areas• Total Chlorine analysis from aqueous solutions and aromatic products to heavy fuels, crudes and catalyst.

• For refineries, petrochemical and additive plants, pipeline terminals and test labs.

Features and Benefits• LOD: 0.06 ppm wt. for aromatics.

• Dynamic range: Standard: 0.06 ppm wt. up to 3000 ppm wt. XR Package: 0.06 ppm wt. up to 4% wt.

• Fits on any bench, in any lab: 37 cm (w) x 50 cm (d) x 34 cm (h).

• Plug-it-in and measure. Standard wall power is only utility required.

• User-friendly with touch screen interface.

• User programmable measurement time: 30-900 s

• Extremely low maintenance:- No conversion gases- No columns- No heating elements- No quartz tubing

• Replaceable air-cooled x-ray tube.

• No sample conversion or combustible gases required.

• Robust polyamide window for easy cleaning.

Autosampler

• 8 sample cell capacity• Increases productivity• Utilitizes XOS Accu-Cell cups



[email protected]

Phoebe Bench-Top Phosphorous Analyzer

Application Areas• Total phosphorus analysis in hydrocarbons (including crude-oil), bio-fuels and aqueous matrices.

• For use in refinery, additive plants, oil recycle facilities and test labs.

Features and Benefits• LOD: 0.4 ppm in 600s.

• Dynamic Range: 0.4-3000 ppm wt.

• Fits on any bench and is compatible for use in mobile labs.

• Robust touch-screen user interface.

• User programmable measurement time: 30 -900 s.

• No conversion or combustible gazes required. No heating elements, quartz tubes or columns.

• Low power air-cooled excitation x-ray tube.

Phosphorus Determination in Hydrocarbon and Aqueous MatricesFrom crude oil to bio-fuels, in additives or water, PHOEBE Bench-Top Analyzer delivers unprecedented precision and accuracy for quantification of phosphorus. Based on XOS’s MWD XRF analytical platform, (as is found in SINDIE and CLORA Analyzers) PHOEBE offers a LOD of 0.4 ppm in hydrocarbon matrices in a ten minute measurement cycle. The analyzer’s extreme easy of use with straightforward touch screen operation allows for use in a broad range of industrial environments. PHOEBE is a plug-it-in and measure analytical solution and does not require extensive sample preparation, consumable gases or sample conversion.

Phosphorus (ppm) in crude oil

r (ppm) R (ppm)

2 0.8 1.25 1.0 1.6

10 1.4 2.015 1.7 2.520 1.9 2.8

Typical repeatability (r) & reproducibility (R) values, at 95% confidence. Measurement time: 600 s.


Signal Bench-TopSilicon Analyzer

Application Areas• Total silicon analysis in hydrocarbons and biofuels.

• For use in refinery labs, pipeline terminals, additive plants and inspection laboratories.

Features and Benefits:• LOD: 0.5 ppm at 600 s.

• Dynamic Range: 0.5 ppm to 3000 ppm.

• Fits on any bench.

• Touch Screen user interface.

• User programmable measurement time: 30-900 s.

• No conversion gasses, heating elements, quartz tubes or columns.

• 75 W air-cooled excitation tube.

Silicon Analysis in Petroleum and Bio FuelsFrom gasoline to ethanol and toluene, the Signal bench-top analyzer delivers unique precision and accuracy in quantitative analysis of silicon. The analyzer is based on XOS’ MWD XRF technology platform (as applied in Sindie and Clora analyzers) ensuring a robust analysis solution for demanding petroleum and industrial environments.

Silicon r R

2 0.4 0.75 0.5 0.88 0.6 1.0

15 0.8 1.4100 2 4500 5 10

Typical repeatability (r) and reproducibility (R) values in gasoline, at 95% confidence. 600 s measurement time.

[email protected]

Spectro FTIR Q410 Alpha Oil AnalyzerFluidscan Series Handheld Lubricant Condition MonitorFuel Dilution Measurement

Oil Degradation & Contamination Monitoring

Complies with ASTM E2412

Spectro FTIR Alpha Q410

Oil Analyzer

Features• Instrument and software specifically designed for the analysis of in-service oil.

• Complies with ASTM E2412 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry.

• Quantitative TAN and TBN analyses (in mgKOH/g).

• Patent-pending flip-top sample cell eliminates need for solvents and simplifies cleaning .

• Ability to analyze fluids with a wide range of viscosities, including greases.

• Fixed interferometer, does not require software or manual alignment.

• Exceptional stability and reliability in harsh operating environments.

• Completely sealed and desiccated to prevent humidity interferences.

• Bench-top, requires little counter space.

The Spectro FTIR Q410Spectrometer is a complete In-Service Oil Analysis System• Software for in-service oil analysis.

• Permanently aligned, high sample throughput interferometer.

• Software that continuously monitors all optical components and accessories.

• Infrared source is easily replaced without special training.

• Fixed interferometer which avoids the need for time consuming and complex alignment.

• Internal Validation Unit (IVU) with calibration standards to systematically validate the system.

• Computer and monitor, Windows® Operating System.

• Ethernet connection for spectrometer operation from a PC, laptop or network.


Spectro FTIR Alpha Q410 Flip Top Cell Eliminates the Need for Solvents and is Easy to Clean and Use with a Wide Range of Fluid Viscosities.

1. Removal Cell 2. Open Cell

3. Clean Cell 4. Place drop of Oil on Cell

5. Close Cell 6. Replace Cell in Spectrometer and Measure Sample

The Spectro FTIR Alpha Q410 Oil Analyzer is specifically designed for the molecular analysis of lubricating oil to determine oil degradation and contamination. It was developed and optimized for predictive maintenance programs according to JOAP and DIN standards for the rapid determination of oxidation, nitration, sulfation, water, coolant, fuel dilution, soot and wear additive depletion in used lubricating oils. It also provides quantitative TBN analysis (in mgKOH/g) for mineral based engine oils and TAN analysis (in mgKOH/g) for polyo lester based synthetic turbine fluids.The Spectro FTIR Alpha Q410 is a bench-top instrument that requires little counter space for operation. It uses an innovative patented flip-top cell to introduce and analyze the sample. Sample introduction is thus extremely simple, reliable and eliminates the need for a peristaltic pump and solvents. The system is easy to use and requires little training for operation since it is optimized for one application: in-service oil analysis.

[email protected]

FluidScan SeriesHandheld Lubricant Condition Monitor

Highly Repeatable and Reproducible Results• ASTM D7889 Compliant - “Standard Test Method for Field Determination of In-service Fluid Properties Using IR Spectroscopy”

• High correlation to KF water, TAN & TBN laboratory tests

• Reproducibility and repeatability comparable to bench-top FTIR method ASTM E2412

• Data analysis compliant to ASTM E1655

Determine When In Service Oil is No Longer Fit For Use Due To Liquid Contamination Or Degradation• Direct immediate measurement of water, TAN and oxidation for lubricants used in gearboxes, turbines and hydraulic systems

• Also measures TBN, water, glycol, soot, additive depletion oxidation for engine oil

Easy to Use• Needs just one drop of oil & one minute to test

• No solvents required to clean

• Color-coded, user adjustable alarm limits

Comprehensive Fluid Library• 12 use type categories with over

ApplicationsApplicable to any large mechanical system where unexpected down time is unacceptable. Ideal applications include:• Engines• Hydraulics• Gas Turbines• Steam Turbines• Wind Turbines• Gears• Transmissions• Compressors• Biodiesel Quality Control

450 fluids for immediate, out of the box operation

• Results for critical properties such as TAN and water contamination for industrial lubricants or TBN, water, glycol and soot for engine oils

Fluid Manager desktop application• Generates sample and trend reports

• Supports and synchronizes multiple instruments

• Provides additional data storage and backup

• Structured asset management capability

SpectroFDM Q6000

Fuel Dilution Meter

Features• Innovative headspace sampling system

• Memory for up to 3 fuel in oil calibrations for quick start up

• Touchscreen interface

Benefits• Minimizes the worry and errors that come with learning different methods and equipment

• Lets you maintain equipment at peak performance with less downtime

• Fast analysis

• Simple-to-use

• Results correlate to expensive GC methods

• Portable, Battery Powered

The Q6000 is a portable fuel dilution meter (“fuel sniffer”) that can be used in the laboratory or the field to provide rapid and accurate measurements of fuel contamination in engine oil.Excessive fuel in the lubricant causes wear and loss of performance. Developed in collaboration with the U.S. Navy, the Spectro Q6000 is widely used for rapid detection of fuel contamination in railway, marine, mining and other industries.


SpectroFDM Q6000

Fuel Dilution Meter

Features• Innovative headspace sampling system

• Memory for up to 3 fuel in oil calibrations for quick start up

• Touchscreen interface

Benefits• Minimizes the worry and errors that come with learning different methods and equipment

• Lets you maintain equipment at peak performance with less downtime

• Fast analysis

• Simple-to-use

• Results correlate to expensive GC methods

• Portable, Battery Powered

The Q6000 is a portable fuel dilution meter (“fuel sniffer”) that can be used in the laboratory or the field to provide rapid and accurate measurements of fuel contamination in engine oil.Excessive fuel in the lubricant causes wear and loss of performance. Developed in collaboration with the U.S. Navy, the Spectro Q6000 is widely used for rapid detection of fuel contamination in railway, marine, mining and other industries.

[email protected]

LaserNet Fines Q200 Particle Shape Classifier & Counter

Q500 Analytical Ferrography Laboratory

Mini Mobile Oil Lab Q5800 Expeditionary Analysis System

Oil Analysis MiniLab 5200 Trivector Analyzer

Particle Counting & Shape Imaging

LaserNet Fines Q200 Particle Shape Classifier & CounterQ500 Analytical Ferrography LaboratoryMini Mobile Oil Lab Q5800 Expeditionary Analysis SystemOil Analysis MiniLab 5200 Trivector Analyzer

LaserNet Fines Q200

Particle Counter & Shape Classifier

Conforms to ASTM D7596, D6786, ISO 4406, NAS 1638, NAVAIR 01-1A-17,SAE AS 4059, HAL

The LaserNet Fines® Advantages• Highest saturation level of any particle counter for oil analysis >5,000,000 particles per ml

• Counts all particles >4 μm to 100 μm and provides results per ASTM 7596 ISO 4406, NAS 1638, SAE 4059, NAVAIR, GOST HAL, ASTM D6786 and user defined standards

• Counts and classifies the number of wear particles in separate categories: cutting wear, sliding wear, fatigue wear and nonmetallic

• Differentiates water droplets from air bubbles and eliminates them from distorting the particle count

• Measures free water in parts per million (ppm)

• Measures dynamic viscosity at 40°C, reports kinematic viscosity with density input

• Sees through dark fluids and black diesel fuels containing up to 2% soot

• Eliminates coincidence error (multiple particles counted as one)

Features and Benefits• Particle count is an indication of a fluid’s cleanliness

• Data outputs include particle type identification, image maps, size trends and ISO, NAS, and NAVAIR cleanliness codes

• Algorithms to perform shape analysis, wear particle identification and machine condition assessment

• Large particles are classed by a neural network as “cutting, fatigue, severe sliding, nonmetallic, free water droplets or fibers”

• Provides image maps of all particles greater than 20 µm

• Handles fluid up to ISO 320 grade oil without sample dilution

• Automatic adjustment for fluid darkness; sees through black diesel lubricating oils.

• Built-in data-base for machine condition trending

• Magnification is set at factory. Recalibration is never required

• Reports dynamic viscosity

• Reports soot (%) and free water (ppm)

• Provides automatic alarms


6

T2FM Q500 Analytical Ferrography Laboratory

Application In today’s modern power generation, manufacturing, refining, transportation, mining and military operations, the cost of equipment maintenance, service, and lubricants are ever increasing. Parts, labor, equipment downtime, lubricant prices and disposal costs are a primary concern in a well run maintenance management program. Machine condition monitoring based on oil analysis has become a prerequisite in comprehensive maintenance programs. The Ferrography Laboratory plays a key role in such programs. It separates and concentrates wear and contaminant particles for microscopic examination. Particle size, surface characteristics and composition are then used to determine wear modes inside a machine so that maintenance recommendations can be made.

Features• Efficient separation of wear and contaminant particles from fluid samples.

• Rapid preparation of ferrogram.

• No deformation of particles.

• Separates particles up to 800 μm in size.

• Lower cost per sample.

• Uses fewer consumables.

• Achieves cleaner rinses.

• Easy to operate.

“A Ferrography Laboratory for fast efficient, low cost separation and interpretation of wear and contaminant particles from used lubrication oils, hydraulic fluids, greases, coolants and fuels .”

Main Components of the Ferrography Laboratory• Model T2FM Analytical Ferrograph

• Bichromatic microscope

• Video camera

• Video capture card

• Image capture software

• Optional industrial standard PC

25 [email protected]

Mini Mobile Oil LabQ5800 Expeditionary Analysis System

Features• Rugged design for on-site, field-based use

• Immediate results for faster decision making

• Tests all types of lubricating fluids and asset compartments

• Accurately detects potential failures before they happen

• Easy to transport; includes a backpack for device and accessories

• Integrated software for comprehensive fluid analysis

• Touch screen interface; battery operated with Bluetooth and WIFI

The Q5800 Includes Three Major Components• Filtration Particle Quantifier (FPQ) tower for abnormal wear metal analysis using XRF technology and particle counting

• Solvent- free kinematic viscometer at 40oC that measures lubricant kinematic viscosity

• Infrared spectrometer featuring an innovative flip-top cell TAN/TBN, water content, soot, oxidation and mixed up fluids using infrared technology

Q5800 Analysis System is a rugged, portable expeditionary fluid analysis system that gives operators in the field the ability to perform comprehensive, mobile lubricant sampling. The battery-powered device enables complete lubricant assessment for condition monitoring and rapid results that permit informed maintenance decisions.

www.biolab.com.tr26

6

Oil Analysis MiniLab5200 Trivector Analyzer

Features & Benefits• Reduce unexpected downtime• Provides a comprehensive overview and indication of metal wear, lubricant chemistry and contamination• Generates machinery health trend analyses to support data driven predictive & preventive maintenance decisions• Reduce maintenance and replacement parts costs.• Early identification of particle contamination from lubricated metal parts wear allows early, preventive intervention prior to catastrophic failure.• Lubricant condition monitoring conserves oil and reduces oil disposal costs by driving maintenance on an as needed basis.• Immediate, on-site lubricant analysis (<10 min) for informed preventive maintenance decisions.• Includes Oil view software, an integral part of the Emerson AMS Machinery Health Manager software suite• Compact, table top system minimizes cost and footprint

Basic Minilab includes: 5200 Trivector Analyzer, Digital Viscometer & Oil view Minilab software module.• Easy-to-understand graphical plots and trends illustrate every measurement.• Automated diagnostic interpretation and recommendations.• Leads you step-by-step through operation of each Minilab instrument.• Startup is quick and easy with an editable reference database of common lubricants.• Set alarm limits using statistical analysis.• Custom configurable report.

Comprehensive Minilab includes: 5200 Trivector Analyzer, Digital Viscometer, Stereoscopic Zoom Microscope, Wear Debris Image Capture System, and Oilview Minilab, WDA, and LIMS software modules.• Laboratory Information Management (LIMS) Software - Data import and management• Wear Debris Analysis Module - Import electronic image of wear debris from any TWAIN compatible camera. - View sample image and compare to wear debris library images - Standardize wear debris analysis using a multiple-choice matrix.

[email protected] 27

Fully Automatic ViscometersAutomatic ViscometersManual Viscometers Portable ViscometersCold Cranking SimulatorsHTHS High Temperature High Shear ViscometersRotary ViscometerPolymer Viscometers

Viscosity Measurement

Features• Auto sampling enables fully unattended operation 100-fold tube range eliminates the need to exchange tubes

• Fully compliant with ASTM D445 / D446, ISO 3104 / 3105 and related specifications

• Requires less sample (8-15 ml) than conventional viscometer

• Reduced solvent consumption up to 60% compared to conventional viscometers

• Automatic Viscosity Index calculation if baths are run at 40º and 100ºC

• Extremely stable bath temperature (±0.005°C)

• Compact, rugged design and built to last

• Low maintenance6

Compliant with

ASTM D445/D446,

ISO 3104/3105

U-VIsc 200 Fully Automatic Kinematic Viscometer

The U-VIsc 200 combines several unique features, making it the instrument of choice in many applications, ranging from QC to R&D to used oil analysis. While offering full compliance with ASTM D445/446, the specially designed viscometer tubes cover an 100-fold range, so a single tube can cover a range of 1-100, 2-200 mm2/s etc. The tubes are based on the well-known & proven Ubbelohde design. Through modification the main advantage of this design (accuracy) is maintained, but the main disadvantages (sample and solvent consumption, ease of use) negated. The modified tubes only require 8-12 ml. of sample and approx. 15-20 ml. of solvent for cleaning. Available with 1 or optional 2 solvent cleaning, the instrument measures kinematic viscosity between 0.5 and 5,000 mm2/s. The instrument is compact, saving costly bench space. It is fitted with 2 independent baths, which each contain 2 100-fold viscometer tubes. Sophisticated temperature control ensures that measurements are carried out well within ASTM D445 requirements. Each bath features a 32-position sampling tray (16 samples per tube), allowing completely unattended operation. Depending on the viscosity of the sample, the instrument can process up to 40 samples per hour, satisfying even the

needs of high volume commercial labs running several hundred samples per day. All measurement data is stored on the connected PC and can be exported directly to LIMS or spreadsheet software.

www.biolab.com.tr30

6

ASTM D445 precision CAV-2100 CAV-2200

CAV-2000 Series Automatic Viscometers

Features• Modular benchtop unit (small footprint)

• Variable temperature selection from 20°C to 100°C

• Viscosity range of 0.5 to 5000 cSt*

• ASTM D445 precision

• Powerful VISCPRO for Windows software

• CE marked for safe, reliable performance

Industries Served• Refinery quality control laboratories• Refinery satellite laboratories • Research & development laboratories• Lube oil blending andpackaging facilities• Oil analysis laboratories• Engine manufacturers• Transmission manufacturers• Railroads• Marine shipping lines• Power companies• Chemical companies• Distribution terminals• Grease manufacturers• Manufacturing companies utilizing hydraulic robotics

Applications• Used oil analysis

• Base stock analysis

• Additive analysis

• Fully-formulated oil analysis

• Marine fuel testing

• Crude oil testing

• Hydraulic oil testing

• Light and heavy fuel testing

Designed for completely unattended operation, each CAV Series viscometer provides fully automatic kinematic viscosity testing within parameters specified by ASTM D445. The CAV 2000 Series instruments measure flow rates within ±0.001 second by electronically timing the liquid meniscus as it moves between thermistor sensors. Thermal sensing technology ensures that dark or opaque liquids can be measured with the same precision as transparent liquids.


6

Meets all ASTM D445

Precision Specifications

MiniAV Automatic Viscometer

Features• Convenient and Affordable Automated Testing

• 100-Fold Range Tubes for Kinematic Viscosities Between 0.5 and 6,000* mm2/s

• Selectable Temperature Range Between 15° and 100°C

• Attractive and Compact Tabletop Unit

MiniAV offers every laboratory an exciting new tool for convenient and highly accurate kinematic viscosity (Kin Vis) measurement. Occupying roughly the same footprint as a tabletop rotational viscometer, the MiniAV automates the time-consuming sample measurement and viscometer tube wash/dry procedures associated with the ASTM D445 method, freeing the laboratory technician for other duties. The MiniAV Automatic Viscometer has been designed as an affordable alternative to traditional labor-intensive manual Kin Vis measurement methods.

Applications• Viscosity • Biofuel• Condition Monitoring • Aviation Fuel • Residual Fuel• Fuels• Lubricating Oil• Crude Oil

Industries: • Asphalt / Bitumen• Refinery• Pipeline / Terminal• Inspection • Process• Biofuel• Aviation• Automotive • Chemical • Lubricants & Greases • Military • Mining• Petroleum • Transportation • Maintenance• Fuels & Waxes• Marine

www.biolab.com.tr32

6

Meets all ASTM D445


MiniAV-X Automatic Viscometer

Features• Meets all ASTM D445 Specifications

• Affordable Automated Testing

• Low Solvent/Sample Volume

• Faster Through-Put

• 100-Fold Tube Ranges for KinVis up to 5000 cSt

• Selectable Temp. from 20 to 100°C

• Smart Table Technology

• Attractive and Compact Bench-top Unit

The MiniAV-X from offers every laboratory an exciting new tool for convenient and highly accurate KinVis measurement. Occupying roughly the same footprint as a tabletop rotational viscometer, the MiniAV-X automates the time-consuming sample measurement and viscometer tube wash/dry procedures associated with the ASTM D445 method, freeing the laboratory technician for other duties. The miniAV-X Automatic Viscometer has been designed as an affordable alternative to traditional labor-intensive manual KinVis measurement methods, and provides full laboratory automation.

Applications• Viscosity• Biofuel • Condition Monitoring • Aviation• Residual Fuel• Fuels• Lubricating Oil

Industries• Asphalt/Bitumen • Refinery • Pipeline/Terminal • Inspection • Process• Biofuel • Aviation• Lubricants & Greases• Chemical • Automotive • Military• Mining • Petroleum • Transportation • Maintenance• Fuels & Waxes • Marine


6

ASTM D445, D2532, D1655, DEF STAN 91:91,

ISO 3104, IP 71, ASTM D446, ISO 3105

MiniAV-LT Low Temperature Automatic Viscometer

Features • Developed Specifically for Low Temperature (Sub-Zero) Kinematic Viscosity Measurement• Meets ASTM D445 and D2532 Precision Specifications• Temperature Range of -20°C to +30°C• Measures KinVis up to 20,000 mm2/s• Ideal for -20°C Measurement of Jet Fuel According to ASTM D1655 & DEF STAN 91:91• Lubricants• Also applicable to sub-zero Testing of Hydraulic Fluids, Turbine and Transformer Oils up to 20,000 mm2/s• Attractive and Compact Tabletop Unit• Environmentally-friendly Peltier Technology Cooling (requires no external refrigerants); Small Air-Water Heat Exchanger Included• Unique Viscometer Tube (Patent Pending) which Incorporates Sensitive Thermistor Sensors• Available with 10-Fold Range Tube• Design Allows Bath to Quickly Warm to +30°C for Easy Automated Cleaning and Drying with Standard Solvents (eliminating common moisture issues)

Applications• Viscosity

• Aviation Fuel

• Fuels

Industries • Refinery

• Pipeline/Terminal

• Inspection

• Aviation

• Lubricants & Greases

• Military

• Petroleum

• Fuels & Waxes

www.biolab.com.tr34

6

ASTM D445, D2532, D1655, DEF STAN 91:91,

ISO 3104, IP 71, ASTM D446, ISO 3105

MiniAV-LT Low Temperature Automatic Viscometer

Features • Developed Specifically for Low Temperature (Sub-Zero) Kinematic Viscosity Measurement• Meets ASTM D445 and D2532 Precision Specifications• Temperature Range of -20°C to +30°C• Measures KinVis up to 20,000 mm2/s• Ideal for -20°C Measurement of Jet Fuel According to ASTM D1655 & DEF STAN 91:91• Lubricants• Also applicable to sub-zero Testing of Hydraulic Fluids, Turbine and Transformer Oils up to 20,000 mm2/s• Attractive and Compact Tabletop Unit• Environmentally-friendly Peltier Technology Cooling (requires no external refrigerants); Small Air-Water Heat Exchanger Included• Unique Viscometer Tube (Patent Pending) which Incorporates Sensitive Thermistor Sensors• Available with 10-Fold Range Tube• Design Allows Bath to Quickly Warm to +30°C for Easy Automated Cleaning and Drying with Standard Solvents (eliminating common moisture issues)


• Aviation Fuel

• Fuels



• Inspection

• Aviation


• Military

• Petroleum

• Fuels & Waxes

6

ASTM D445

MiniQV-X Quick Automatic Viscometer

Features• VISCPRO II software for Windows

• Powerful reporting and LIMS connectivity

• The MiniQV-X measures flow rates within ±0.001 seconds

• Thermal meniscus detection – eliminates issues caused by opaque samples

• Bath temperature is controlled with accuracy better than ±0.01°C between 40°C and 100°C

• Low sample volume Ubbelohde style tube 4 to 5mL

• Low solvent consumption- 8mL typical per sample

• 10-fold range tubes for kinematic viscosity between 5 and 800 mm2/s @ 40°C

The MiniQV-X offers the laboratory an exciting new tool for convenient and rapid kinematic viscosity (KV) measurement. Occupying roughly the same footprint as a tabletop rotational viscometer, the MiniQV-X automates the time-consuming sample measurement and viscometer

tube wash/dry procedures associated with the ASTM D445 method, freeing the laboratory technician for other duties. MiniQV-X Automatic Viscometer is designed as a rapid fully-automated viscosity analysis tool - an alternative to slower ASTM D445 compliant manual measurements. Operation of the MiniQV-X is simple & quick with typical sample-to-sample cycle times of less than three minutes.


• Condition Monitoring

• Lubricating Oil

Industries• Refinery

• Inspection

• Automotive


• Petroleum

• Maintenance


6

MiniPV & MiniPV-X Polymer Solution Viscometer

Features • Designed to Meet the Unique Needs of Users in the Polymer Industry

• Calculation of Relative, Inherent, Reduced and Intrinsic Viscosity

• 0.3 to 5,000 centistokes range (special ranges available on request)

• Superb Temperature Control from 20 to 100°C

• Accurate Flow Times ( to 0.01 seconds)

• Thermistor Sensors

• Peltier Technology Cooling for efficient operation near ambient temperatures

• Powerful VISCPRO II Software for Control, Calculation and Database Management

• Compatible with Most Solvents used for Polymer Characterization

• Applications: Solutions of Elastomers, Plastics, TPEs, Copolymers, Bio-polymers, Blends, Oligomers, Pre-Polymers, Resins, Viscosity Modifiers, Pulp and Cellulose

• Now Available with 10-place Auto-Sampler

OperationOperation of the MiniPV® is simple. First, the sample vial is charged with about 15 mL of solution.Second, the sample vial is positioned in the vial holder beneath the viscometer. Third, the sample platform is raised to the viscometer. This action initiates the sample loading procedure and the subsequent series of automatic processes that were specified by the user in the S II method parameters. In general, the sample is drawn into the viscometer tube, held until the temp. has equilibrated, and then released to drain during automatic timing of the flow rate. Data is transferred via the RS-232 serial connection to a host computer that stores and maintains the data in a MS Access® database. The sample is then ejected as waste and the sample vial becomes a wash station as solvent is automatically injected into the viscometer tube to initiate the cleaning cycle which can include a second solvent for a subsequent rinse and a final purge of compressed air. Following tube drying, the vial holder is returned to its original position, ready to receive the next sample.

www.biolab.com.tr36

6

ASTM D2857, D4603, D789, D1243,

D1795, USP 911, D4243,

SCAN-CM 15:99 - ISO 1628,

ISO 307, ISO 5351, Tappi T230, PAPTAC G.24P, Etc.

MiniPV-HX Fully AutomaticPolymer Solution Viscometer

Features• Designed to Meet the Unique Needs of Users in the Polymer Industry

• Calculation of Relative, Inherent, Reduced and Intrinsic Viscosity

• 0.3 to 5,000 centistokes range (special ranges available on request)

• Superb Temperature Control from 20 to 100°C

• Accurate Flow Times ( to 0.01 seconds)

• Thermistor Sensors

• Peltier Technology Cooling for efficient operation near ambient temperatures

• Powerful VISCPRO II® Software for Control, Calculation and Database Management

• Compatible with Acids and Solvents used for Polymer Characterization

The miniPV®-HX is an essential tool for the measurement of polymer solution viscosities. Its accuracy and convenience are based on the masterful design of temperature control, fluid handling, sensor technology, and automation. Complete control of the instrument is

provided through VISCPRO II software (for Windows® which also facilitates procedural tasks such as calibration, data entry, method specification, calculation selection, report format and data exporting. The MiniPV®-HX occupies roughly the same footprint as an analytical balance, yet is able to provide a high level of automation which includes sample loading, temp. equilibration, flow time measurement, and cleaning of the entire system between analysis


Industries • Pharma

• Plastics

• Automotive

• Chemical


6

Conforms to the requirements in ASTM D445,

D446, D7279, IP 71 and ISO 3104.

SpectroVISC Q300

Automatic Single Bath Viscometer

Features• Compliant with requirements for ASTM D445, D7279 and related specifications.

• High throughput – up to 60 samples per hour to ASTM precision.

• Small sample volume – 0.3 to 0.6 ml.

• Low solvent consumption – 2.5 ml per sample.

• Easy to use.

• Automatic flow time measurement.

• Fully automatic cleaning and drying.

• Fast, easy tube replacement, no need to drain bath.

• Single or dual solvent injection system.

• Ultra-precise meniscus detection.

• No PC required for system to operate.

• System is chemically resistant.

• Optional dual measurement capability.

Q300 Single Bath Viscometer is a bench-top semi-automatic kinematic temperature bath viscometer optimized for the analysis of used and new lubricants. It conforms to the requirements in ASTM D445, D446, D7279, IP 71 and ISO 3104. It is also the ideal system for used oil analysis laboratories that need to test a wide range of lubricant viscosities

SpectroVISC Q300 can be operated from the built-in control panel or from an optional external PC .

Analytical results can be viewed on the built-in LCD display or with the included data management software on an optional external PC .

www.biolab.com.tr38

6

Conforms to the precise requirements of

ASTM D445, D446, D7279, IP 71,

ISO 3104 and ASTM D2270

SpectroVISC Q310

Automatic Dual Bath Viscometer

SpectroVISC Q310 is a dual-bath, bench-top semi-automatic kinematic temperature viscometer optimized for the analysis of used and new lubricants. It conforms to the requirements in ASTM D445, D446, D7279, IP 71 and ISO 3104. It is also the ideal system for used oil analysis laboratories that need to test a wide range of lubricant viscosities.

Features• Compliant with requirements for ASTM D445, D2270 and related specifications.

• High throughput – up to 120 samples per hour.

• Small sample volume – 0.3 to 0.6 ml.

• Low solvent consumption – 2.5 ml per sample.

• Easy to use.

• Automatic flow time measurement.

• Fully automatic cleaning and drying.

• Fast, easy tube replacement, no need to drain bath.

• Single or dual solvent injection system.

• Ultra-precise meniscus detection.

• No PC required for system to operate.

• System is chemically resistant.

• Optional dual measurement capability.

Viscometer tubes can be easily replaced without the need to drain the bath.


6

ASTM D445, D7279, ISO 3104 and related

specifications for kinematic viscosity testing.

UT-FlowManual Viscometer

Features• Extreme ease of use

• Highly reliable and repeatable measuring results

• Short measuring times

• Quick bath and sample warm-up

• Very low sample quantities (0.3 - 0.8 ml)

• Semi-automated drying and cleaning

• Easily removable viscometers

• Integrated system design eliminates the need for a separate thermostatic bath

• Savings up to 90% on cleaning & drying agents

• Exceptional bath temperature stability

• Viscometers can be independently cleaned

• Compliant with or exceeding requirements in ASTM D445, D446, D7279 and related specifications for kinematic viscosity testing

The UT-flow viscometer was designed as a high speed low cost alternative for commonly used viscometer types such as the Ubbelohde and Cannon Fenske. Although reliable, these viscometers present the user with a number of disadvantages:

• Large quantities of both sample and cleaning & drying agents are required

• Because of its large volume it’s difficult to clean or dry the viscometer completely

• Measuring cycles are generally long

UT-Flow Manual Viscometer eliminates all these disadvantages. Because of the small volume of the viscometer much smaller quantities of both sample and drying & cleaning agents are required, which saves considerably on measurement costs, guarantees complete cleaning and drying and allows for quick sample warm-up. Up to 90% savings on cleaning/drying agents are feasible compared to conventional viscometers.

www.biolab.com.tr40

6

ASTM D445 for kinematic viscosity measurements

with glass capillary viscometers.

CT-500Constant Temperature Bath

Features• Accurate temperature control from 20°C to 100°C

• Safe/reliable operation

Specifically designed for precise viscosity determination with glass capillary viscometers, the CT-500 and CT-518 baths offer superior temperature control to 100°C. CT-500 offers a 30.5 cm (12”) bath jar that can accommodate most viscometers. The CT-518 bath provides a depth of 45.7 cm (18”).

Applications • Viscosity

• Bitumen

• Biofuel


• Aviation

• Residual Fuel

• Fuels

• Lubricating Oil,

• Crude Oil

• Grease & Wax,

Industries • Asphalt/Bitumen

• Refinery


• Inspection

• Process

• Biofuel

• Food/Flavor/Fragrances

• Pharma

• Environmental

• Paints & Coatings

• Plastics

• Aviation

• Automotive

• Chemical


• Military

• Mining

• Petroleum

• Transportation

• Maintenance

• Fuels & Waxes

• Marine


6

Meets ASTM D445 precision

specifications from 10°C to 100°C

CT-600 Constant Temperature Bath

Features• Ideal for kinematic viscosity determinations between 10°C and 30°C

• Built-in thermoelectric cooling provides “rock-solid” temperature control at ambient and below

• Meets ASTM D 445 precision specifications from 10°C to 100°C

CT-600 is similar to the CT-500 but includes built-in thermoelectric cooling modules, making it ideal for controlled temperature applications between 10°C and 30°C. CT-600 provide accurate temp. control per ASTM D445 specifications between 10°C and 100°C.

Applications• Viscosity • Bitumen • Biofuel• Condition Monitoring • Aviation • Residual Fuel• Fuels • Lubricating Oil, • Crude Oil• Grease & Wax


• Refinery


• Inspection

• Process

• Biofuel


• Pharma

• Environmental


• Plastics

• Aviation

• Automotive

• Chemical


• Military

• Mining

• Petroleum

• Transportation

• Maintenance

• Fuels & Waxes

• Marine

Bath Cooler

www.biolab.com.tr42

6

ASTM D445 for kinematic

viscosity measurements with

glass capillary viscometers.


Features• Select Temperature from 20 to 150°C & 200°C for HT Model

• Multiple Safety Features

This durable and accurate insulated bath offers quick-set temperature control options and ASTM D445 reliability to 150°C. Up to 7 viscometer tubes/holders can be placed in the bath. The unit is equipped with several safety features, including a bath level float and over-temp. thermistor.


• Bitumen

• Biofuel


• Aviation

• Residual Fuel

• Fuels

• Lubricating Oil

• Crude Oil

• Grease & Wax


• Refinery


• Inspection

• Process

• Biofuel


• Pharma

• Environmental


• Plastics

• Aviation

• Automotive

• Chemical


• Military

• Mining

• Petroleum

• Transportation

• Maintenance

• Fuels & Waxes

• Marine


6

ASTM D445 for Kinematic

Viscosity Measurements


Features• Microprocessor-Controlled Temperature Regulation to 150°C

• Built-in Platinum Resistance Thermometer

• On-Screen Temperature Monitoring

Convenient keypad operation and ASTM reliability at temperatures to 150°C make the CT-2000 the bath of choice for many users. Microprocessor-controlled temp. regulation, on-screen temp. monitoring, and serial networking options make this digital bath an attractive fully functional addition to the modern labApplications • Viscosity • Bitumen • Biofuel• Condition Monitoring • Aviation • Residual Fuel• Fuels • Lubricating Oil• Crude Oil• Grease & Wax


• Refinery


• Inspection

• Process

• Biofuel


• Pharma

• Environmental


• Plastics

• Aviation

• Automotive

• Chemical


• Military

• Mining

• Petroleum

• Transportation

• Maintenance

• Fuels & Waxes

• Marine

www.biolab.com.tr44

6

ASTM D445 for Measurement of

Kinematic Viscosity at Low Temperatures

TE-1500Constant Temperature Bath

Features• Temperature Range from +10°C to –30°C

• Precision and Stability – Satisfying ASTM D445 Specifications

• Environmentally-Friendly Thermoelectric Cooling System

• Compact Footprint; No Accessory Heating/Cooling Units Required

The thermoelectrically - cooled TE-1500 provides rock-steady cooling to –30°C using Peltier Cell Technology. Cooling fans and front panel controls are the only moving parts in this advanced design. A four-pane frost-free viewing window and twin fluorescent lamps provide excellent visibility and illumination within the bath.


• Aviation Fuel

• Fuels

• Lubricating Oil



• Inspection

• Process

• Aviation


• Military

• Petroleum

• Fuels & Waxes


6

ASTM D445 for Measurement of

Kinematic Viscosity at Low Temperatures

TE-3000Constant Temperature Bath

Features• Temperature Range from +30°C to –30°C

• Self-Contained Thermoelectric Cooling No Accessory Units Required

• Convenient Keypad Data Entry

• Selectable Temperature Scale (Celsius or Fahrenheit)

• Meets ASTM D 445 Requirements for Temperature Stability

Our premiere digital bath model for low-temperature applications, The TE-3000 combines reliable thermoelectric cooling with convenient keypad operation. Temperature settings remain stored in memory even if bath power is cut off. The liquid-crystal display indicates temperature in Celsius or Fahrenheit. A self-diagnostic routine and upgradeable firmware are just two of many improvements in our internationally respected bath technology.


• Aviation Fuel

• Fuels

• Lubricating Oil



• Inspection

• Process

• Aviation


• Military

• Petroleum

• Fuels & Waxes

www.biolab.com.tr46

6

Correlates very well to

ASTM D7279 & D445

Q3000 SeriesPortable Kinematic Viscometers

Direct Kinematic Viscosity MeasurementA measure of a liquid’s flow under the influence of gravity is provided at a constant temperature, so viscosity can be compared and trended with prior readings. Requires no density check, temperature measurement,instrument pre-configuration or calculation.

Split-cell Capillary ChannelUsing a very small sample size; the sampling chamber controls temp. while infrared sensors measure flow and trajectory, delivering immediate results.

Self-contained with High-resolution Touch Screen, Battery and MicroprocessorEnables easy operation, in sunlight or low light, drawing minimal power for a 6-hour battery life. Requires no PC.

Small Sample SizeSmall sample size of 60µl (about 4 drops) is easy to obtain without impacting lubricant level. Reduces waste.

Temperature controlled: 40°C ± 0.1°C Each sample is held to a constant temp. for consistently accurate readings without additional pre-test measurements.

Works with Transparent & Opaque OilsProvides accurate results for even the dirtiest samples.

No Cleaning Solvent NecessaryEliminates worry about solvent disposal in remote locations. Fewer items to carry.

Weighs less than 1.8 kg (4 lbs.) Designed for remote locations, the Q3000 series includes a hinged cover that protects the sample chamber and touch screen while being carried by hand, in a toolbox or in a knapsack.

Battery operatedStays charged for more than 6 hours. Built-in universal charger for use worldwide; region-specific power cable included.

Q3000 units can be ordered as a combination kit with the FluidScan® Series portable infrared fluid condition monitors.


6

MINIVIS II Portable Micro-Viscometer

Viscosity 0.2 to 1500 mPasRepeatability / Reproducibility 0.3% @ 1 mPas / 0.5% @ 1 mPasTemperature 0 to 100 °CSample Volume 0.4 mLMeasuring Time 3 - 10 min.Measuring Units mPas; cP; cSt; msec (selectable)Power Requirements 100/120/230/240 V AC, 50/60 Hz 80 WDimensions W x H x D, Weight 196 x 315 x 175 mm, 8 kg

Features• Precision according to International Standards ASTM D445, ISO 12058, DIN 53015

• Fast Measurement

• Fully Automatic

• Easy Cleaning

• Wide Application Range

• Clear, Opaque, Dark and Light-Scattering Liquids

• 0.4 mL Sample Volume

• 0.2 - 1500 mPas (cSt)

• 0 - 100 °C (Peltier)

• Laboratory and On-line Operation

Technical Specifications

MINIVIS II is an automatic, portable, temperature controlled micro falling-ball viscometer used for all kinds of Newtonian liquids. The use of reflection sensors makes it possible to cover a wide range of applications: samples as dark as used oil, heavy-oil, black ink and blood can be measured with highest accuracy and repeatability.

The small sample volume and easy handling features eliminate the usual cleaning problems of other viscometers.

For on-line applications, a valving system using a syringe with a flow-through insert is available. The built-in Peltier elements make the use of an external cooler unnecessary.

Precision according to International Standards

ASTM D445, ISO 12058, DIN 53 015

www.biolab.com.tr48

6

MINIVIS II Portable Micro-Viscometer

Viscosity 0.2 to 1500 mPasRepeatability / Reproducibility 0.3% @ 1 mPas / 0.5% @ 1 mPasTemperature 0 to 100 °CSample Volume 0.4 mLMeasuring Time 3 - 10 min.Measuring Units mPas; cP; cSt; msec (selectable)Power Requirements 100/120/230/240 V AC, 50/60 Hz 80 WDimensions W x H x D, Weight 196 x 315 x 175 mm, 8 kg

Features• Precision according to International Standards ASTM D445, ISO 12058, DIN 53015

• Fast Measurement

• Fully Automatic

• Easy Cleaning

• Wide Application Range

• Clear, Opaque, Dark and Light-Scattering Liquids

• 0.4 mL Sample Volume

• 0.2 - 1500 mPas (cSt)

• 0 - 100 °C (Peltier)

• Laboratory and On-line Operation


MINIVIS II is an automatic, portable, temperature controlled micro falling-ball viscometer used for all kinds of Newtonian liquids. The use of reflection sensors makes it possible to cover a wide range of applications: samples as dark as used oil, heavy-oil, black ink and blood can be measured with highest accuracy and repeatability.

The small sample volume and easy handling features eliminate the usual cleaning problems of other viscometers.

For on-line applications, a valving system using a syringe with a flow-through insert is available. The built-in Peltier elements make the use of an external cooler unnecessary.

Precision according to International Standards

ASTM D445, ISO 12058, DIN 53 015

6

SimpleVisPortable Automatic Viscometer

Features• Direct Kinematic Viscosity Measurement, no need to Correlate Dynamic Viscosity Data

• Modified Cross-Arm Style Tube, works with Both Transparent & Opaque Oils

• Reliable: Only 2 Moving Internal Parts

• Easy to Use: Graphical Touch Screen

• Small Sample Volume: 0.5 mL

• Rapid Cycle Time: ~ 3 min

Portable and Rugged

• Smallest Capillary Viscometer on the Market

• Solid Bath (no liquid to spill)

• Fully self-contained (no external PC)

SimpleVIS™ portable viscometer offers the industry an exciting new tool for quick reliable kinematic viscosity measurement. SimpleVIS provides exceptional temp. control which is paramount to accurate viscosity measurement of petroleum liquids. If your site needs near laboratory quality viscosity measurements, then the SimpleVIS is your instrument.


• Biofuel


• Fuels

• Lubricating Oil



• Inspection

• Biofuel

• Automotive

• Chemical


• Military

• Mining

• Petroleum

• Transportation

• Maintenance

• Fuels & Waxes

• Marine

Correlates with ASTM D7279 & ASTM D445


6

Excellent correlation to

ASTM D445 and ISO 3104

MINIVIS 445 PortableKinematic Viscometer

Features• Excellent correlation to ASTM D445 & ISO 3104

• Viscosity index (ASTM D2270)

• Viscosity range of 0.2 - 2000 mm2/s (mPa.s)

• Only 25 mL sample

• Only 3 min. turnaround time for a sample with 100 cSt at 40°C

• Fast thermoelectric temperature control (Peltier)

• Automatic sample introduction

• Wide temperature range -20 to 110°C

• Automatic programmable cleaning cycles

Easy CleaningAn automatic rinsing cycle with solvent or a new sample cleans the entire system, that's why we use 25 mL of sample, when only 5 mL are needed for measuring. Due to its bayonet enclosure, the viscosity cell is also easily removable for inspection and cleaning in an ultrasonic bath. You can confirm cleanliness

before your results are wrong. The instrument is delivered with a couple of viscosity cells to avoid any down time during cleaning.

The MiniVis 445 is the clever combination of a rolling ball viscometer, an advanced density meter, and an automatic filling system: Precise determination of dynamic and kinematic viscosity over a wide temperature range, all in a rugged instrument fit for heavy duty environments, yet precise enough for the lab bench. The use of reflection sensors makes it possible to cover a wider range of applications: even samples as dark as used or heavy-oil can be measured with highest accuracy and repeatability.

Users appreciate the small sample volume and the automatic sample feeding, the measurement cell is easily accessible and eliminates the usual cleaning problems of other viscometers. Temp. control with the built-in Peltier elements eliminates large water baths and allows for quick determination of viscosity indices.

www.biolab.com.tr50

6

Meets all the requirements of

ASTM D5293 and SAE J300.

CCS Automatic Cold-Cranking Simulator

Features• Cooled by Built-in Solid-State Thermoelectric Modules

• Powerful VISCPRO® for Windows® Software

• Fully Automatic Operation

• Improved Precision Over Earlier Models

Thermoelectrically - Cooled Cold-Cranking Simulators measure the apparent viscosity of oils at temperatures from –35°C to –5°C within a viscosity range of 1500 mPa•s to 27,000 mPa•s. The CCS-2100 combines automatic sample loading, computer-controlled operation, and solvent-free cleaning to permit completely unattended operation. No further operator involvement is required after initial loading of the sample table and identification of samples. The CCS-2100 will automatically test up to 30 samples at one time, calculate their viscosities, and record the results, freeing the operator for other tasks. Improved temperature management of the rotor/stator eliminates the need for grouping the samples by temperature of analysis, as was necessary in older CCS models.

In addition, a thermoelectric sample warming cycle greatly improves the sample flushing process. CCS-2100 meets all the requirements of ASTM D5293 and SAE J300.


• Lubricating Oil

• Tribology

Industries • Automotive


• Petroleum


6

ASTM D5481, D4741,

CEC L-36-A-90, IP 370,

SAE J300

High-TemperatureHigh-Shear Viscometer

Features• ASTM D5481, ASTM D 4741, CEC L-36-A-90, IP 370, SAE J300

• Measures 15 to 20 Samples per Hour

• One-Button Operation - Load Sample, Set Pressure, and Press “Start”

• Reduced Role for Operator Enhances Repeatability and Reproducibility

• Variable Temperature and Shear Rate for Research Applications

High-Temperature High-Shear Capillary Viscometer (HTHS Series II) is designed to determine the viscosity of engine oils and other oils under conditions of high shear at high temperatures. The HTHS is capable of testing at 1.4 x 106s–1 at 150°C and meets all precision specifications of ASTM D5481 and SAE J300. The Series II design incorpo-rates simple one-button operation — just load samples, set pressure, and press the Start button. The reduced operator role enhances repeatability and reproducibility. If desired, variable shear rates (± 30 percent of the shear rate specified in ASTM D5481) may be obtained by altering the test pressure (variable from 75 to 500 psi).

The viscosity range of 2-7 mPa•s can be extended to more than 20 mPa•s with custom configuration.


• Lubricating Oil

• Tribology


• Inspection

• Automotive


• Military

• Petroleum

• Maintenance

• Fuels & Waxes

www.biolab.com.tr52

6

Ravenfield High TemperatureHigh Shear Viscometer

Features• Automatic positioning of the rotor and stator gap.• Uses industry standard test method & materials (ASTM D4741)• (optional) Wider test ranges built in.- test over higher and lower shear rates,- test over higher and lower temp. -to 200oC- 150 W of shearing power.• Higher measurement precision, with 20 bit measurement paths throughout.• Fully digital speed control.• Fully digital temperature control with adaptive non-linear servo system, gives fast accurate control over the “sweet spot” of the measurement test point.• Continuous test severity monitoring, control and correction• Low bench top requirements (~450mm wide, 600mm deep)• Integrated Heating – no external bath.- Liquid circulation, for precision control.• Integrated computer – no space for a PC- Touchscreen operation, no bench clutter.• Integrated Printer – high speed printer.• Integrated vacuum pump for sample extraction and pre-filtering of used oils.• Integrated calibration oil storage & pumping, with level monitoring.

• (Optional) Inert gas purge to protect calibration, and allow higher temperature operation• External data interface via standard Web Browser, secure access to all test results.• Built in SPC (statistical process control) system.• Built in LIMS , over TCP/IP interface.• Automatic flowcurve generation for Non-Newtonian sample evaluation.• (Optional) integrated auto sampler available.• “Failsafe” mode – manual operation always available.

High-temperature High-shear testing of engine lubricants according to ASTM D4741, CEC L-36-A-90 and IP 370 as specified by SAE J300 and ACEA.

ASTM D4741 is aligned with ASTM methods D4683 (TBS) and D5481.

Benefits• 1-2 percent repeatability

• Onboard viscosity calculator

• Compatibility with DR Auto sampler

Model BS/C is designed to measure at temperatures from 40°C to 180°C and shear rates from 100,000 to 1,500,000 reciprocal seconds. Flexibility makes it a useful tool for many high-shear research applications. The BE/3 base model is also available for SAE J300 testing.


6

Viscosity Measurements

ASTM D445, D2196, D4287

and equivalent

Black Pearl Rotary Viscometer

Applications• Viscosity Measurements

• Temperature Ramps

• Yield Stress Measurements

• Thixotropic Recovery Tests

• Sticky Point Determination

Industries• Oil

• Paint, Coating & Ink

• Pharmaceutical & Cosmetic

• Lubricant

• Food

The BLACK PEARL controlled shear rate rotational rheometer is a high perfor-mance instrument capable of both steady shear and yield stress testing in a rugged yet compact footprint. Designed for performing both routine QC tests and complex R&D evaluations, the BLACK PEARL is ideal for investigating the mixing, stirring and process flow characteristics of fluid systems. The unit comes standard with build in Peltier Temperature Control for all measuring systems. Cone and plate,

parallel plate and concentric cylindermeasuring systems are included. The measuring systems employ novel “quick capture” mounting technology. The gapping mechanism is highly accurate and user adjustable.

BLACK PEARL is Interfaced and Controlled with Powerful Windows Based SoftwareKey Features Include:• Real time display of test values

• Automated program control

• “Test Definition” windows to rapidly create multiple step experiments

• Provides instantaneous viscosity flow curves

• Interactive graphing allows full control over displayed, printed, and plotted variables

• User enterable data sets and data comparison

• Simple data exportation through Windows Clipboard to Excel

• CE certified

www.biolab.com.tr54

6

Meets ASTM D7226


Digital Paddle Viscometer

Features • Designed for non-homogeneous materials including marine fuels, emulsions, suspensions, residual oils, slurries, foods, and other materials

• NEW water-cooled model available

• Temperature control to 0.1°C at 25, 40, 50, 80, and 100°C

• Rugged and lightweight

• Meets ASTM D7226 precision specifications

The Digital Paddle Viscometer has been designed to accurately measure the viscosity of emulsified asphalts, suspensions, marine fuels, residual oils, slurries, paints and similar materials between 30 and 30,000 mPa•s at temperatures of 25°C, 40°C, 50°C, 80°C, and 100°C (see temperature specifications for temperature associated with each model). Follows Standardized Test Methodology: ASTM D7226 for emulsified asphalt testing. Available in two models (standard and water-cooled), the Digital Rotational Paddle Viscometer can also be used for other applications consistent with its temperature control and viscosity measurement capabilities. Ideally suited

for field use, the Rotational Digital Paddle Viscometer can determine the viscosity of lubricating oils, marine fuels and other liquids, yielding results with an accuracy of five percent or better for most materials—better than that required by ASTM D445 for residual oils at 50°C.


• Bitumen

• Residual Fuel

• Fuel

• Lubricating Oil

• Crude Oil

Industries • Asphalt/Bitumen• Paints & Coatings• Marine• Refinery• Pipeline/Terminal• Lubricants• Petroleum• Fuels• Grease & Wax


6

TE-DPV Thermoelectric Digital Rotational Paddle Viscometer

Features• Designed for nonhomogenous materials, including marine fuels, emulsified asphalts, suspensions, slurries, foods, residual oils and other materials

• Environmentally Friendly

• Small Sample Size

• Follow Standardized Test Methodology: ASTM D7226

Thermoelectric Digital Rotational Paddle Viscometer (TE-DPV) has been designed to accurately measure the viscosity of emulsified asphalts, suspensions, marine fuels, residual oils, slurries, paints and similar materials between 30 and 3,000 mPa•s at temperatures of 25°C , 40°C, 50°C, 80°C, and 100°C. The Rotational Digital Paddle Viscometer follows Standardized Test Methodology ASTM D7226 for emulsified asphalts testing. The TE-DPV can also be used for other applications consistent with its temperature control and viscosity measurement capabilities.

Ideally suited for field use, the Rotational Digital Paddle Viscometer can determine the viscosity of lubricating oils, marine fuels and other liquids, yielding results with an accuracy of five percent or better for most materials—better than that required by ASTM D445 for residual oils at 50°C.

Meets ASTM D7226


www.biolab.com.tr56

6

Meets ASTM D7226


Model 2020 Rotary Viscometer

Features• Accurate Digital Viscometer

• Multiple Spindles and 18 Speeds

• Displays Viscosity Directly in cP or mPa·s

• Simple Operation

Model 2020 Rotary Viscometers provide a convenient, low cost means for the viscosity determination. These easy-to-use instruments measure the viscous drag of a liquid against a rotating spindle. A digital readout displays viscosity directly in centipoise (shown as cP) or milliPascal-seconds (shown as mPa•s). No calculations are required — just select spindle and speed, press the Motor On switch, and read the viscosity from the front panel display. Model 2020 Rotary Viscometers are available in two types. The low viscosity LV-2020 model and the medium viscosity MV-2020 model

Applications• Viscosity• Bitumen• Residual Fuel• Fuels • Lubricating Oil• Grease & Wax • Tribology


• Refinery


• Inspection

• Process


• Pharma

• Environmental


• Plastics

• Automotive

• Chemical


• Military

• Mining

• Petroleum

• Transportation

• Maintenance

• Fuels & Waxes


6

CMRV 4500 Mini Rotary Viscometer

Features• Thermoelectrically-cooled with enhanced temperature control and test precision

• Measures yield stress and viscosity for drive line lubricants and engine oils

• Meets latest SAE J300 specifications for low-temperature pumpability

• High-performance rotors with carbon fibre shafts

• Meets requirements of ASTM D4684, ASTM D3829, and ASTM D6896

• ASTM D6821 compatibility with optional Drive Line Rotor Kit

The CMRV-4500 Mini-Rotary Viscometer is designed to measure yield stress and viscosity of drive line lubricants and new and used automotive engine oils over a temperature range of –5°C to –40°C, meeting ASTM D4684, D3829, D6821 and D6896 requirements. The CMRV instrument determines pumping viscosity in accordance with the latest SAE J300 specifications.


• Lubricating Oil



• Petroleum

Meets requirements of ASTM D4684,ASTM D3829, and ASTM D6896

ASTM D6821 compatibility with optionalDrive Line Rotor Kit

www.biolab.com.tr58

6

CMRV 5000 Mini Rotary Viscometer

Features• Self-Contained Air-Cooled Unit — Thermoelectric Temperature Control

• Measures Yield Stress and Viscosity for Drive Line Lubricants and Engine Oils

• Meets Latest SAE J300 Specifications for Low-Temperature Pumpability

• High-Performance Rotors with Carbon Fibre Shafts in Five Removable Cells for Easy Cleaning

• Meets Requirements of ASTM D4684, D3829, D6821 & D6896

CMRV-5000 Mini-Rotary Viscometer is designed to measure yield stress and viscosity of drive line lubricants and new and used automotive engine oils over a temperature range of –5°C to –40°C, meeting ASTM D4684, D 3829, D6821 and D6896 requirements. CMRV instrument determines pumping viscosity in accordance with the latest SAE J300 specifications. innovative redesign of the reliable Mini-Rotary Viscometer series.


• Lubricating Oil



• Petroleum

Meets Requirements of ASTM D4684, D3829, D6821 & D6896


6

Test Methods

ASTM D2983,

ISO 9262, IP 267

Brookfield Viscosity at Low Temperatures

Features• Programmable Liquid Visibility Bath for Brookfield Viscosity at Low Temperatures

• Superior data reproducibility and repeatability vs. air chamber method

• Replaces the need for balsa wood carriers

• Operating temperature range from +20° to -55°C

• Temperature stability better than ±0.1°C

• Full visibility of the immersed sample

• One and two independent bath models

The use of programmable liquid baths for ASTM D2983 has been allowed since the first development of the test if the cooling profile meets the specifications of Annex A2 of the method. Liquid baths are programmed such that the sample cooling rate equals the cooling rate experienced by a sample when immersed in the constant low temperature air chamber. The bath can also be programmed to cool at a rate of 1°C per minute from ambient to as low as -55°C as per CEC-L-18A, ISO 9262, and IP 267 for the measurement of European low temperature Brookfield Viscosity.

LB-76 LB76-2

Operating temperature range of the programmable liquid baths is +20° to -55°C. Temperature control is within ±0.1°C. Windows based software is capable of controlling two baths simultaneously.This allows operating baths at two independent temp. with independent start, stop, and duration times.

Model LB-76 Programmable Liquid Bath is a bench top model has a single bath with 10 sample capacity. A Windows based PC is required (not supplied). The bath is supplied with an integral leveling viscometer support rod.

Model LB-76-2 Is a bench top model and is identical to LB-76 but with two independently controlled baths, each with 10 sample capacity. This allows two simultaneous tests at different temperatures and independent start and/or stop times.

www.biolab.com.tr60

6

Test Methods

ASTM D2983,

ISO 9262, IP 267

Brookfield Viscosity at Low Temperatures

Features• Programmable Liquid Visibility Bath for Brookfield Viscosity at Low Temperatures

• Superior data reproducibility and repeatability vs. air chamber method

• Replaces the need for balsa wood carriers

• Operating temperature range from +20° to -55°C

• Temperature stability better than ±0.1°C

• Full visibility of the immersed sample

• One and two independent bath models

The use of programmable liquid baths for ASTM D2983 has been allowed since the first development of the test if the cooling profile meets the specifications of Annex A2 of the method. Liquid baths are programmed such that the sample cooling rate equals the cooling rate experienced by a sample when immersed in the constant low temperature air chamber. The bath can also be programmed to cool at a rate of 1°C per minute from ambient to as low as -55°C as per CEC-L-18A, ISO 9262, and IP 267 for the measurement of European low temperature Brookfield Viscosity.

LB-76 LB76-2

Operating temperature range of the programmable liquid baths is +20° to -55°C. Temperature control is within ±0.1°C. Windows based software is capable of controlling two baths simultaneously.This allows operating baths at two independent temp. with independent start, stop, and duration times.

Model LB-76 Programmable Liquid Bath is a bench top model has a single bath with 10 sample capacity. A Windows based PC is required (not supplied). The bath is supplied with an integral leveling viscometer support rod.

Model LB-76-2 Is a bench top model and is identical to LB-76 but with two independently controlled baths, each with 10 sample capacity. This allows two simultaneous tests at different temperatures and independent start and/or stop times.

6

PolyVisc Automatic Viscometer& Polymer SPS

The modified Ubbelohde tube is particularly suited for more volatile samples, and may significantly enhance determinability and repeatability.

Polymer SPS Features• Prepares Dilute Polymer Solutions for Relative Viscosity Measurements Using Weight-to-Weight Methodology

• Eliminates Errors Due to Variations in Solvent Density and Cumbersome Manual Weight & Volume Measurements

• Provides Concentration Accuracy Often Better than ±0.02%

PolyVISC® Solution Preparation System is semi-automated solution preparation system that uses gravimetric rather than volumetric methodology. The SPS can be used with the PolyVISC Automatic Viscometer to provide a complete polymer analysis system

PolyVisc Features• Automatic glass capillary polymer viscosity analysis between 0.3 to 20,000 cSt*

• Compatible with most solvents used for polymer work

• Unique AIRBATH® technology – ultrastable thermostatic air chamber

• Temperatures from 20 to 100°C (135°C with High Temperature Option)

• VISCPRO® Windows® software calculates relative viscosity, inherent viscosity, reduced viscosity, and intrinsic viscosity

• May also be used for other viscosity applications

PolyVISC® Automatic Viscometer combines automatic sampling, viscosity measure, viscometer washing and polymer solvent compatibility to provide a convenient bench top unit ideal for dilute solution polymer viscosity analysis.

PolyVISC Viscometer TubesTwo tube types are available for the PolyVISC instrument. The modified Atlantic compound viscometer tube is suitable for most samples.

Polymer Solution Preparation System PolyVisc Automatic Viscometer


Industrial Tribology Laboratory

Spectro Industrial Tribology Laboratory (ITL)

Spectro Industrial Tribology Laboratory (ITL)

Features• Intuitive web interface (SpectroTrack)

• Easily configurable with both Spectro Scientific & non-Spectro Scientific devices

• Supports multiple fluid types

• High productivity and good sample throughput (most measurements take about 1 minute)

Benefits• World standard ITL solution

• A complete monitoring solution

• Measures all parameters of lubricant, machine and contamination conditions

• ASTM testing

• Asset management software, trending, reporting

SpectroTrack Information Management SystemFeatures• Self-contained installation on one server

• Designed specifically for oil analysis programs – dedicated or contract testing

• Supports customer (private label) branding

• Remote portals can access systems over the Internet

• Laboratory dashboard for easy work flow management

• Scales well as your business

Benefits• High accuracy

• High sample throughput

• Easy to operate

• Rugged and reliable

• Low operating costs and environmental impact

• Faster cleanup

www.biolab.com.tr64

The Importance of Lubricant and Fluid Analysis in Predictive MaintenanceMachine condition monitoring or predictive maintenance is the practice of assessing a machine’s condition by periodically gathering data on key machine-health indicators to determine when to schedule maintenance. One of the keys to keeping machinery operating at optimal performance involves monitoring and analyzing lubricant oils for characteristics such as contamination, chemical content and viscosity. Billions of dollars are spent annually replacing machinery components that have worn out due to the inability of the lubricants to perform the required task. Knowing how to interpret changing lubricant properties can increase both the uptime and the life

Industrial Tribology Laboratory (ITL)The Industrial Tribology Laboratory (ITL) is a turnkey system that provides a complete lubricant analysis condition monitoring solution. The measurements made using the Industrial Tribology Laboratory determine lubricant and machine condition, the core of any effective predictive maintenance system. ITL system is expandable and can incorporate testing and measurement solutions for other machinery fluids such as fuel, coolants, transformer oils and greases.ITL installs and provides training for all instruments as an integrated system. Since the Industrial Tribology Laboratory is a turnkey system, supplied and installed by one vendor, the worry and learning curve errors associated with new methods and equipment are minimized during the startup process. Condition monitoring of your equipment can begin immediately after the installation of your instruments and during the initial training of your personnel.The instruments that constitute an ITL are carefully chosen because they provide the necessary data to effectively monitor the condition of your oil lubricated equipment, but also because they are easy to operate and maintain, require a minimum of special utilities to install and provide strong sample throughput (most measurements take about 1 minute). The analytical instruments send results to the central computer (or a network) where they are stored in database file for subsequent analysis, evaluation, and reporting.

Common Mission Critical Equipment• Aircraft

• Construction

• Excavators

• Haul Trucks

• Locomotives

• Military Equipment &Transport

• Manufacturing Machinery

• Oil Refinery / Drilling Rigs

• Race Car Fleets

• SAG Mills & Mining Equipment

• Ships and Marine Fleets• Turbines in Energy Generation

Typical Equipment Components of Concern• Blowers

• Compressors

• Differentials

• Gas and Steam Turbines

• Gear Boxes and Reducers

• Hydraulic Systems

• Motors and Bearings

• Propulsion Systems

• Pumps

• Roller Element Bearings

• Rotary/Scroll Compressors

• Reciprocating Engines

• Sleeve Bearings

• Transmissions

• Transformers

• Wind and Gas Turbines


Distillation Analysis

MINIDIS ADXpert Automatic Distillation Unit

FAD 86 Fully Automatic Distillation

Distillation Systems & Pilot Plants

Crude Oil Distillation Systems

Thin - Film Evaporators

Excellent correlation to ASTM D86,ISO 3405, ASTM D850 & ASTM D1078and IP 123, IP 195; Groups: 0 to 4

Performs exclusively according to the small scale distillation standard ASTM D7344


Features• Performs exclusively to the new standard ASTM D7344 (group 0-4)

• Excellent correlation to ASTM D86, ISO 3405 and IP 123, ASTM D850 and ASTM D1078

• True atmospheric distillation

• Superior repeatability and

reproducibility

• Dry point detection

• Driveability Index

• Test temperature 0 – 400°C

Benefits• Automatic and fast mini-distillation for highest productivity– Automatic temperature controlled sample introduction system– Automatic flow correction and cooling– Fast & easy cleaning• Small, rugged and truly portable, ideal for laboratory, mobile or field use• Short turnaround time• Easy operation (guided step-by-step user menu)• Only 6 ml of sample• Inexpensive consumables• Highest safety: No fragile glassware, no fire extinguisher necessary• No operator bias• Accurate volume detection (optical meniscus)• Exact residue determination (built-in balance)• Automatic pressure correction• 20 different pre-installed programs for each group (0-4)• MINIWIN PC-Software for remote control and seamless LIMS-integration• Optional 12V vehicle battery operation

Applications (Laboratory & Mobile)• Gasoline and naphta• Kerosene and jet fuel• Diesel & fuel oil• Biofuels• Automotive, aviation and marine fuels• Blending• Adulteration & contamination detection• Spirits and other liquid petroleum products• Narrow boiling products• Volatile organic liquids• Solvents and chemicals

www.biolab.com.tr68

PILODIST 086 CCAutomatic Distillation System

Features• Automatic temperature calibration (Operated automatically before each distillation without need of external calibration equipment)• Level follower with stepper motor• Automatic calibration of the volume measurement, zero point and 100 ml• Efficient heating system• Accuracy: +/- 0,1 ml volume, +/- 0,01oC temperature• Receiver chamber heating system, range 0 - 60oC• Distillation range 0 - 450oC• Calculation of cetane index• 100 and 200 ml measuring cylinders useable, consequently 100 and 200 ml test samples may be distilled • "door open" sensor,• Built in environment friendly Peltier elements for cooling and heating• Built in automatic fire-extinguishing system, with an external Nitrogen (N2) supply• Emergency “STOP ALL” switch• Slim design• Learning Program

• Built in, Windows based industrial PC, with 12,1" TFT active color LCD-Display with Touch-Screen for most comfortable operation of the analyzer, including - Intel Atom Micro-Processor - 64 GB compact flash card - Ethernet interface for intranet connection - USB plugs for possible connections of: - Keyboard - Mouse / trackball - Printer - Software package - Windows Software.

Accordance the following standards: ASTM D86 (group 0-4), ASTM D216, ASTM D285 (modified), ASTM D447, ASTM D1078 (internal standardized with solvents and group 7 and 8)IP 123, ISO 3405 and DIN 51751.

Excellent correlation to ASTM D86,ISO 3405, ASTM D850 & ASTM D1078and IP 123, IP 195; Groups: 0 to 4

Performs exclusively according to the small scale distillation standard ASTM D7344


Features• Performs exclusively to the new standard ASTM D7344 (group 0-4)

• Excellent correlation to ASTM D86, ISO 3405 and IP 123, ASTM D850 and ASTM D1078

• True atmospheric distillation

• Superior repeatability and

reproducibility

• Dry point detection

• Driveability Index

• Test temperature 0 – 400°C

Benefits• Automatic and fast mini-distillation for highest productivity– Automatic temperature controlled sample introduction system– Automatic flow correction and cooling– Fast & easy cleaning• Small, rugged and truly portable, ideal for laboratory, mobile or field use• Short turnaround time• Easy operation (guided step-by-step user menu)• Only 6 ml of sample• Inexpensive consumables• Highest safety: No fragile glassware, no fire extinguisher necessary• No operator bias• Accurate volume detection (optical meniscus)• Exact residue determination (built-in balance)• Automatic pressure correction• 20 different pre-installed programs for each group (0-4)• MINIWIN PC-Software for remote control and seamless LIMS-integration• Optional 12V vehicle battery operation

Applications (Laboratory & Mobile)• Gasoline and naphta• Kerosene and jet fuel• Diesel & fuel oil• Biofuels• Automotive, aviation and marine fuels• Blending• Adulteration & contamination detection• Spirits and other liquid petroleum products• Narrow boiling products• Volatile organic liquids• Solvents and chemicals


ASTM D86, D1078, D850E123, IP 195, IP 191, IP 123, DIN 51751, NF M07-002, EN ISO 3405, JIS K2254, ISO 918, BS2000 Parts 123, 191, 195, BS 7392, 10% residue for carbon residue measurement Gasoline E10, E15 & E20 samples

FAD 86Fully Automatic Distillation

Benefits• Extremely precise, reliable & comparable test results

• Fast, easy, fully automatic operation yet with unparalleled customization options

• High end, solid state hardware:

- Volume Scan – accurate detection of the bottom of the meniscus

- Condenser with Peltier elements: reliable with fast cooling interactions

- Low voltage heater with reflection system: 30% more heat & efficiency

• Safety through fire extinguisher with advanced fire and nitrogen detection

• Multiple language support

Intuitive & Easy with iPadThe special DistPad app on the iPad gives you easy, yet complete control over the distillation process. The DistPad app comes with pre-programmed ASTM D86 programs and a set of major ASTM methods. New programs can be easily created from method presets and customized for special products. Standard users will enjoy an intuitive & automatic operating experience, while high-experience users are allowed to

Data Handling & Printing Automatically store, restore and synchronize data with an FTP-server. Send to LIMS, save as PDF, email, print with optional Zebra printer and direct print on A4. FAD 86 offers you a wide variety of flexible data handling, compatible with Windows operated systems and all common modern techniques.

explore a lot of distillation parameters, which is great for research purposes and special products. Service level login allows our trained engineers to optimize programs for extremely difficult samples with unparalleled performance levels. Different user types with variable access rights give each user the right protection and freedom in their own working environment. Free software updates are easily downloaded from the Apple Appstore.

www.biolab.com.tr70

ASTM D86, D1078, D850E123, IP 195, IP 191, IP 123, DIN 51751, NF M07-002, EN ISO 3405, JIS K2254, ISO 918, BS2000 Parts 123, 191, 195, BS 7392, 10% residue for carbon residue measurement Gasoline E10, E15 & E20 samples

FAD 86Fully Automatic Distillation

Benefits• Extremely precise, reliable & comparable test results

• Fast, easy, fully automatic operation yet with unparalleled customization options

• High end, solid state hardware:

- Volume Scan – accurate detection of the bottom of the meniscus

- Condenser with Peltier elements: reliable with fast cooling interactions

- Low voltage heater with reflection system: 30% more heat & efficiency

• Safety through fire extinguisher with advanced fire and nitrogen detection

• Multiple language support

Intuitive & Easy with iPadThe special DistPad app on the iPad gives you easy, yet complete control over the distillation process. The DistPad app comes with pre-programmed ASTM D86 programs and a set of major ASTM methods. New programs can be easily created from method presets and customized for special products. Standard users will enjoy an intuitive & automatic operating experience, while high-experience users are allowed to

Data Handling & Printing Automatically store, restore and synchronize data with an FTP-server. Send to LIMS, save as PDF, email, print with optional Zebra printer and direct print on A4. FAD 86 offers you a wide variety of flexible data handling, compatible with Windows operated systems and all common modern techniques.

explore a lot of distillation parameters, which is great for research purposes and special products. Service level login allows our trained engineers to optimize programs for extremely difficult samples with unparalleled performance levels. Different user types with variable access rights give each user the right protection and freedom in their own working environment. Free software updates are easily downloaded from the Apple Appstore.

Methods ASTM D86, D1078, D850. E123, IP195, IP191, IP123, DIN51751, NFM07-002, EN ISO 3405, JIS K2254, ISO918, BS2000 Parts 123, 191, 195, BS 7392, 10% residue for carbon residue measurement. Gasoline E10, E15 & E20 samples.

User interface

systemLow mass low voltage heater with reactor, providing 30% more

Final heatCondenser systemVolume scan system

Charge volume: 0- 103%Residue

Vapor temp. measurements

0 – 450 °C on ASTM or 0 – 500 °C Absolute. PT-100 class A

thermometer results to Mercury in-glass thermometer results.

Ambient pressureSafety

System healthensuring all components are in excellent state.

printer, email, PC, FTP server and Pad.Dimensions & Weight

Dimensions: 40cm x 40cm x 65cm (W x D x H). Weight: 40 kg.

AccessoriesVoltage 100-240 VAC 50/60 HzPower 1.2KW

requirementsEnvironment temperature 10 °C – 35 °C. Environment humidity up to 80 % at 35 °C.


Multiple language support

CCD volume scanning device


Turn Key Processor controlled crude oil distillation system

for Fully Automatic, Semi Automatic & Manual operation

according to ASTM D2892

Compact design with control system and safety items for unattended operation. No operator intervention and no intermediate stops are required.The distillation ensues automatically from the gas cut (IBP) to the pre-selected end point without any interruptions and any interventions. The yield calculation refers to the weight of the flask charge. The weights of the fractions are detected by means of a build in electronic balance prior to the discharge from the system into the fractional collector. Online weight measurement and automatic volume detection is provided with fully automatic system.A data station for overriding parameter input as well as for display and print - out


Crude Oil Distillation SystemPETRODIST 100 S/M/CC

of all operation parameters, distillation results and TBP-curve, as well as an external balance is included.The system is modularly constructed and provides the possibility to allow several options like water removal (prior to the start of the distillation), stainless steel flasks, gas detector, hydrogen sulfide-alarm and cold-trap as well as a complete sheating of the system. The TBP-curve will then be printed out in weight and volume percent.There are manual, semi-automatic & fully automatic options are available for Petrodist 100 Series. All necessary accessories will be supplied together with the system.

100 CC 100 S / M

Flask Size 1, 2, 4, 6, 10, 20 and 50 L

vacuum down to 1 Torr

Max. 350oC

Final Cut Temperature 400oC AET

20 receivers 9 receivers

Power Supply 3 x 208 – 250 V, 50 Hz

Dimensions (W x H x D) Approx. 2.6 x 3.5 x 0.9 m

www.biolab.com.tr72

Turn key processor controlled crude oil distillation system

for fully automatic operation according to ASTM D5236

(Standard Test Method for Distillation of

Heavy Hydrocarbon Mixtures, Vacuum Potstill Method).

The system is designed for unattended operation (during the distillation), the safety devices are designed accordingly. Data station for data input as well as for display and print out of all operation parameters, distillation results and distillation curve. The distillation ensues automatically from the start to the pre-selected or detected end point. The distillate volume is automatically recorded by means of an integrated volume follower system. The volume is measured separately on every individual receiver. The unit does not contain any intermediate receiver i.e.: to avoid reblend of the distillate. The volume calculation is expressed as percentage corresponding to the weight and the volume of the flask


Crude Oil Distillation SystemPETRODIST 200 S/CC/CC HV

charge or total recovery. The distillation curve is printed out in weight and volume percent. The fraction changes are carried out automatically, alternatively according to a pre-selected boiling temperature or distillate volume or when the receivers are filled up. The vacuum-tight fraction collector contains 12 receivers with a capacity 500 mL. The boil up rate is controlled according to a pre-selected distillation rate in ml/min. An accurate vacuum control guarantees the required stability of the distillation pressure. Petrodist 200CC provides online volume detection & automatic weight measurement and also HV (High Vacuum) option for higher temperature distillation processes.

200 CC 200 CC HV

Flask Size 2, 4, 6, 10, 20 L 6 L

400oC

Final Cut Temp. 565oC AET 620…650°C AET

vacuum down to 0.1 Torr 0.006 – 10 mm Hg

Dimensions (W x H x D) 1.6 x 2.2 x 0.9 m 4 x 2.6 x 0.8 m

Power Supply 3 x 208 – 250 V 50 Hz

Turn key processor controlled crude oil distillation system

for fully automatic operation according to ASTM D5236

(Standard Test Method for Distillation of

Heavy Hydrocarbon Mixtures, Vacuum Potstill Method).

The system is designed for unattended operation (during the distillation), the safety devices are designed accordingly. Data station for data input as well as for display and print out of all operation parameters, distillation results and distillation curve. The distillation ensues automatically from the start to the pre-selected or detected end point. The distillate volume is automatically recorded by means of an integrated volume follower system. The volume is measured separately on every individual receiver. The unit does not contain any intermediate receiver i.e.: to avoid reblend of the distillate. The volume calculation is expressed as percentage corresponding to the weight and the volume of the flask


Crude Oil Distillation SystemPETRODIST 200 S/CC/CC HV

charge or total recovery. The distillation curve is printed out in weight and volume percent. The fraction changes are carried out automatically, alternatively according to a pre-selected boiling temperature or distillate volume or when the receivers are filled up. The vacuum-tight fraction collector contains 12 receivers with a capacity 500 mL. The boil up rate is controlled according to a pre-selected distillation rate in ml/min. An accurate vacuum control guarantees the required stability of the distillation pressure. Petrodist 200CC provides online volume detection & automatic weight measurement and also HV (High Vacuum) option for higher temperature distillation processes.

200 CC 200 CC HV

Flask Size 2, 4, 6, 10, 20 L 6 L

400oC

Final Cut Temp. 565oC AET 620…650°C AET

vacuum down to 0.1 Torr 0.006 – 10 mm Hg

Dimensions (W x H x D) 1.6 x 2.2 x 0.9 m 4 x 2.6 x 0.8 m

Power Supply 3 x 208 – 250 V 50 Hz


Special advantages of the new PETRODIST 300 CC are• Computer as parameter input and display unit as well as calculation of the distillation data and printing of the distillation curve• Menu control guarantees easy & userfriendly operation• Flexible parameter selection makes using of the system for continuous problem definitions possible• Perfected safety system• Distillation reports and curves can ever be re-called• Calculation of charge according to receiver temperature and charge density

• Detailed distillation data by self-calibrated accurate volume measuring system• Minimum installation effort as the system is delivered ready for operationThe distillation volume is measured automatically in tempered receiver. Yield is calculated in percentage to the charge quantity. Distillation report, final data and distillation curve are printed out. Manuel and Fraction Collector options are also available.

Crude Oil Distillation SystemPETRODIST 300 M/CC/CC-F


Crude oil distillation system

according to ASTM D1160, D5236

Flask sizes 500 ml

Flask charge 200 ml

up to 400° C (750° F)

Final cut temperature up to 550° C AET (1020° F)

Max ambient temperature 25° C

vacuum down to 0.1 Torr

Mains supply 208 – 250 V, 50 Hz (60 Hz upon request)

Dimensions (W x H x D) approx 0.65 x 0.64 x 0.96 m

www.biolab.com.tr74

Special advantages of the new PETRODIST 300 CC are• Computer as parameter input and display unit as well as calculation of the distillation data and printing of the distillation curve• Menu control guarantees easy & userfriendly operation• Flexible parameter selection makes using of the system for continuous problem definitions possible• Perfected safety system• Distillation reports and curves can ever be re-called• Calculation of charge according to receiver temperature and charge density

• Detailed distillation data by self-calibrated accurate volume measuring system• Minimum installation effort as the system is delivered ready for operationThe distillation volume is measured automatically in tempered receiver. Yield is calculated in percentage to the charge quantity. Distillation report, final data and distillation curve are printed out. Manuel and Fraction Collector options are also available.

Crude Oil Distillation SystemPETRODIST 300 M/CC/CC-F


Crude oil distillation system

according to ASTM D1160, D5236

Flask sizes 500 ml

Flask charge 200 ml

up to 400° C (750° F)

Final cut temperature up to 550° C AET (1020° F)

Max ambient temperature 25° C

vacuum down to 0.1 Torr


Dimensions (W x H x D) approx 0.65 x 0.64 x 0.96 m

Crude oil distillation system for fully automatic operation according to ASTM D2892 (TBP) & ASTM D5236 (Potstill)

PETRODIST 400 combination systems: PETRODIST 100 (ASTM D2892) & PETRODIST 200 (ASTM D5236)Both systems can operate at the same time (simultaneously) in fully automatic, uninterrupted and unattended mode. The data evaluation software provides also a combined TBP-curve for both systems. Compact design with control system and safety items for unattended operation. No operator intervention and no intermediate stops are required. All necessary accessories are supplied together with the system. The installation requires water, nitrogen, compressed air and electricity. The system enables to perform TBP & Potstill distillations of various crude samples according to ASTM standards and is designed for laboratory use. The PETRODIST 400 system is equipped with central computer control, vacuum supply Technical Specifications

Crude Oil Distillation SystemPETRODIST 400 A/S/CC

and thermostate system, data storage and evaluation station as well as a fraction collector, designed to serve for both distillation systems simultaneously and provides direct automatic distillation flow rate control. The fractional receiver changes are automatically performed according to pre-selected cut temps. or in case of receiver overfilling. Both systems are equipped with individual fraction collectors to allow simultaneous operation of both systems. The final data and the TBP-curve in wt% and vol% are printed out after reweighing the residue. Dry ice or liquid nitrogen is required for cold traps. There are manual, semi-automatic and fully automatic options are available for Petrodist 400 series.

Equip. for ASTM D2892 Equip. for ASTM D5236

2, 4, 6, 10, 20 and 50 L 2, 4, 6, 10, 20 L

Up to 350°C Up to 400° C

Vacuum down to 1 Torr Vacuum down to 0.1 Torr

Final cut temp. Up to 400°C AET Up to 565°C AET


Operation stages follow

ASTM D2892: ATM, 100, 10, 2 torr

Column efficiency similar

to ASTM D2892

Features• Bench scale crude oil distillation system for semi-automatic operation

• Quick distillation of small crude oil charges

• 2 hrs. for each distillation stages

• Fraction collector for automatic or manual operation

• Operation stages follow ASTM D2892: ATM, 100 torr, 10 torr, 2 torr

• Column efficiency similar to ASTM D2892

Following an increasing demand for crude oil distillations to analyze small quantities in a short period of time PILODIST has modified the existing HRS 500 system to be applied for the purpose of crude oil

Crude Oil Distillation SystemPETRODIST 500Q


distillation at a very attractive price. Although the distillation column is packed with Propak 316 and the controller allows to perform all required distillation runs (atmospheric and vacuum 1 – 3) the system is similar but not strictly designed according to ASTM D2892 standard. The system can be operated alternatively with fraction collector or with the intermediate receiver for larger cut volumes as well as the determination of the actual distillation rate. Both collection systems are included in the scope of supply.The purpose of this system is to get a quick analysis of the composition of crude oil for further decisions.

100 - 350 ml

(similar ASTM) ATM, 100 torr, 10 torr, 2 torr

down to 1 torr

Up to 400°C AET, (750° F)

Mains supply 208 - 250 V, 50 Hz (60 Hz upon request)

Weight Approx. 80 kg

Dimensions (W x H x D) 1.20 x 1.50 x 0.50 m

www.biolab.com.tr76

With concentric tube column MRS 255.Apparatus for fractionation of small charge quantities.

The Special Advantage of the Concentric-Tube-Column are:• Extremely low pressure drop

• Highest separation efficiency

• Minimum hold-up

• All-glass construction

• Static design (no rotation)


Distillation Systems & Pilot Plants MRS 255 Micro-Distillation

The separation efficiency in the concentric-tube-column is based on the physical principle of the mass transfer between vertically rising vapor and the spirally trickling film of liquid in a concentric annular gap made of glass. The column consists of two concentrically melted-in, especially selected and calibrated glass tubes.Concentric-tube-column is perfectly suitable for the separation of temperature sensitive substances.

3 - 25 ml

20° - 250° C

1000 – 0,01 mbar (depending on sensor range)


Weight approx. 31 kg

Dimensions (W x H x D) approx. 0.90 x 0.75 x 0.50 m


With concentric-tube-column HRS 500. Especially versatile unit with highest separation efficiency & up-to-date processor control.

Advantages of the Concentric-Tube-Column • Extremely low pressure drop

• Highest separation efficiency

• Minimum hold-up


• Static design (no rotating parts inside the column)


Distillation Systems & Pilot Plants HRS 500 C Semi-Micro Distillation

The separation efficiency in the concentric-tube-column is based on the physical principle of the mass transfer between vertically rising vapor and the spirally trickling film of liquid in a concentric annular gap made of glass. The column consists of 2 concentrically melted-in, especially selected and calibrated glass tubes.Concentric - tube - column is perfectly suitable for the separation of temp. sensitive substances.

Flask sizes 50, 100, 250 ml

10 - 150 ml

20° - 250° C

atm down to 0.001 mbar


Weight approx. 76 kg


www.biolab.com.tr78

Versatile distillation system with high separation efficiency. The system is supplied with 2 different column types (DN 25), a concentric-tube-column and a wire gauze trickling column, which can alternatively be applied according to requirements.Gentle distillation by temp. controlled oil bath with product circulation. Operation range from ATM down to vacuum.This distillation system can be operated by using a single final receiver or alternatively by using a spider type automatic fraction collector with 6 receivers of 1 L volume each. Equipped with processor based


Distillation Systems & Pilot Plants PILODIST 104 Versatile distillation

distillation control device DCD4001 with heating control for oil bath and heating mantle, automatic reflux control, vacuum control, fraction collector control as well as safety devices.ApplicationSuitable for solving difficult separation problems and for the production of pure substances, aromatic compounds of high molecular weight, fatty acids etc..

Flask sizes 1, 2, 4, 6, 10 and 20 L

Material Glass

20 - 250°C

1000 - 0,1 mbar

up to 90 theor. plates

Mains supply 208 - 250 V, 50 (60 Hz upon request)

Dimensions (W x H x H) 1,60 x 2,70 x 0,50 m


Versatile distillation apparatus with high separation efficiency. The system is designed for automatic operation and includes an automatic fraction collector. The fraction changes resp. the receiver changes are automatically carried out according to pre-selected boiling temperatures or when the receivers are filled up. The vacuum-tight fraction collector contains 9 receivers and provides an overfill protection for each receiver. The receiver volume is related to the flask size.System is supplied with 2 different column types (DN 25), a concentric-tube-column and a wire gauze trickling column, which can alternatively be applied according to requirements.


Distillation Systems & Pilot Plants PILODIST 105 Versatile distillation

Gentle distillation by temperature controlled oil bath with product circulation. Operation range from ATM down to vacuum.Equipped with processor based distillation control device DCD4001 with heating controller for oil bath and heating mantle, automatic reflux control, vacuum controller and controller for the automatic Fraction collector.ApplicationSuitable for solving difficult separation problems and for the production of pure substances, aromatic compounds of high molecular weight, fatty acids etc.

Flask sizes 1, 2, 4, 6, 10 and 20 L

Material Glass

20° - 250° C

1000 - 0.1 mbar


Dimensions (W x H x D) approx. 30 x 2.70 x 0.50 m

www.biolab.com.tr80

PILODIST 107 is an easy to handle solvent recovery system for extremely pure solvents.The solvent mixtures are side products of extraction’s, washing processes, chemical and biochemical reactions, chromatographic operations in clinical range, especially in anatomical and pathological institutes.System is equipped with a concentric -tube-column, i.e. highest separation efficiency and high load ranges.


Distillation Systems & Pilot Plants PILODIST 107 Recovery Unit

ApplicationAll kind of solvents like acetone, DMF, THF, parrafins, Xylenes, alcohol’s, acetonitriles, isooctane, hexane, methyl chloride and other HPLC-solvents.

Characteristics• Trouble-free operation due to static all glass contruction


• System is mounted in a safety cabinet with transparent front door.

Flask sizes 6, 10 and 20 L

Material borosilikat glass, grease-free

max. 300° C

500 mm

Load range approx. 150-3000 ml/h



PILODIST 250 Computer controlled distillation system for continuous operation. The system is designed especially for training students in process engineering/thermodynamics at universities. The system equipped with a DN 50 Packed or bubble cup tray column with 5 – 10 build in trays. The bubble cup column can be additionally equipped with temperature and sample nozzles on each tray.The distillation parameters are recorded and indicated on screen and can be stored permanently as recipes and recalled at any time.

Feed range approx. 1 - 8 L/hColumn type DN 50 mm packed column or bubble cup tray

20 - 250°C1 - 1000 mbar

Dimensions (W x H x D) approx. 1.8 x 3.5 x 0.6 mPower supply 208 – 250 V, 50 Hz (60 Hz upon request)

PILODIST 254 Crude Oil Pilot PlantCrude oil pilot plant for studying purposes or for simulation of the operation conditions in industrial-scale crude oil refineries or low-scale production plant. Distillation system with 5 bubble cap tray columns DN 100 with 10 plates as main column and max. 3 side columns (option) DN 50 with 5 plates each.Continuous operation, separation into boiling cuts by taking off the top product, max. 3 side products and the residue from the reboiler.Fully automatic operation due to freely programmable control. Reduction of the boiling point by stripping with superheated, unsaturated steam at atmospheric conditions or under vacuum.At every second plate sample take-off nozzles and temperature sensors are installed for determination and recording of concentration and temperature profiles. Mass- and energy balances can be obtained by computer station with print-out of the distillation report by a printer.The system will be supplied together with a mounting frame and all necessary accessories. The installation requires a suitable hall with platforms and stairs as well as nitrogen, water and electricity.

Feed rate approx. 4-40 kg/hColumn type DN 100 made of stainless steelEvaporator material stainless steel, 6000 WColumn load max. 100 kg/hReceiver size Receiver size

up to 350° CAmbient temperature max. 25° C

vacuum down to approx. 50 mbarup to 400° C AET50 plates


System height approx. 12 m



www.biolab.com.tr82

FilmDist SP 200Universal lab-scale apparatus for short path evaporation.Rotary thin-film evaporator with thermostat mantle and internal condenser for continuous short path distillation or gentle concentration of thermally sensible products. Suited for laboratory or pilot operation.The pilot operation data and experimental values can be transferred to bigger systems.The standard system uses glass wiper elements. Other wiper elements are available.

FilmDist TF 650 Universal apparatus for thin-film evaporation for lab-scale and pilot-scale application, complete with all necessary accessories for continuous operation.Rotary thin-film evaporator with thermostat mantle and external condenser.The model TF 650 is excellently suited for universal lab-scale and pilot-scale application and is completely equipped with all necessary accessories for the continuous operation.

Thin-Film Evaporators



Short path evaporation SP 500 for throughput up to 10 l/h available.

Feed range 50 - 1000 ml / h

Evaporator material borosilicate glass

Feed-vessel 250 ml

Product receivers 250 ml

Evaporator surface 200 cm2, short path

up to 200°C

0.001 - 1000 mbar


Material borosilicate glass

Evaporator surface

up to 200°C

0.1 mbar

Throughput approx. 0.5-10 l/h

Mains supply 208-250 V, 50 Hz (60 Hz upon request)



Gasoline & Diesel Analyzers

Octane CFR EngineCetane CFR EngineBlenders For Octane & CetaneIRXpert Gasoline AnalyzerIRXpert Diesel AnalyzerIROX 2000 Gasoline AnalyzerIROX Diesel AnalyzerMINIWIN IROX for Fuel Analysis

ASTM Methods

D2699-10 (RON),

D2700-10 (MON) &

Conforms to IP 237 & IP 236.

Octane CFR Engine with Automation

Features and Benefits• Easy setup for either ASTM D2699 Test Method (RON) or ASTM D2700 (MON) Standard Test Method for Motor Octane Number.

• User-friendly operation for consistent, reliable results. Touch screen panel interface. Built-in prompts guide operator through test procedures for all ASTM test methods.

• On-screen rating displays with bold graphics and easy-to-read charts.

• Automatic data recording and graphic report generation. Preserves data integrity and allows direct data access, data sharing and archiving.

• Fully integrated digital controls for safe operation. Robust protection. Integrated shutdown system, visual status with alarms, automatic event log.

• Electronic maintenance log. Easily record oil changes, carbon blasting, cylinder installation and routine maintenance.

• Available Octane Analyzer Option. Fully automated for greater productivity, more consistent results from operators, and faster operator training.

ApplicationAutomatic Octane CFR Engine provides consistent, accurate fuel ratings for refineries, independent labs, engine manufacturers & regulatory agencies worldwide.Accurate definition and measurement of fuel’s characteristics enables manufacturers to design engines for optimal performance and durability. Consistent, accurate test results provide assurance that the fuel meets performance expectations .

www.biolab.com.tr86


& ISO 5165 fuel specifications.

Cetane CFR Engine with Automation

Features and Benefits• User-friendly operation: Robust, easy to set up system with automatic controls.

• Efficient operation: Fuel flow rates, injection timing and compression ratios , all may be adjusted while unit is operating.

• Automatic data recording and graphic report generation: Preserves data integrity and allows direct data access, data sharing and archiving.

• Fully integrated digital controls for safe operation: Robust protection. Integrated shutdown system, visual status with alarms, automatic event log.

• Electronic maintenance log: Easily record oil changes, carbon blasting, cylinder installation and routine maintenance.

• Full range of diesel fuel testing: Compression ratio range of 8:1 to 36:1.

ApplicationAutomatic Cetane CFR Engine provides consistent, accurate fuel ratings for refineries, independent laboratories, engine manufacturers and regulatory agencies worldwide.Accurate definition and measurement of a fuel’s characteristics enables manufacturers to design engines for optimal performance and durability. Consistent, accurate test results also provide assurance that the fuel will meet performance expectations in engines for which it is formulated.

Cetane CFR engine is one of the world’s most widely used diesel fuel rating instruments for cetane determination, and the only one that conforms to both ASTM D613 and ISO 5165 fuel specifications. This innovative technology enables engine operators to be confident that the diesel fuel they use meets its advertised cetane number and is safe for their engines.


& ISO 5165 fuel specifications.

Cetane CFR Engine with Automation

Features and Benefits• User-friendly operation: Robust, easy to set up system with automatic controls.

• Efficient operation: Fuel flow rates, injection timing and compression ratios , all may be adjusted while unit is operating.

• Automatic data recording and graphic report generation: Preserves data integrity and allows direct data access, data sharing and archiving.

• Fully integrated digital controls for safe operation: Robust protection. Integrated shutdown system, visual status with alarms, automatic event log.

• Electronic maintenance log: Easily record oil changes, carbon blasting, cylinder installation and routine maintenance.

• Full range of diesel fuel testing: Compression ratio range of 8:1 to 36:1.

ApplicationAutomatic Cetane CFR Engine provides consistent, accurate fuel ratings for refineries, independent laboratories, engine manufacturers and regulatory agencies worldwide.Accurate definition and measurement of a fuel’s characteristics enables manufacturers to design engines for optimal performance and durability. Consistent, accurate test results also provide assurance that the fuel will meet performance expectations in engines for which it is formulated.

Cetane CFR engine is one of the world’s most widely used diesel fuel rating instruments for cetane determination, and the only one that conforms to both ASTM D613 and ISO 5165 fuel specifications. This innovative technology enables engine operators to be confident that the diesel fuel they use meets its advertised cetane number and is safe for their engines.


Fully Conforms to Methods:

ASTM D2699, D2700, D2885 & D613

Blenders For Octane & Cetane Reference Fuel

Features• Fully Conform to Methods: ASTM D2699, ASTM D2700, ASTM D2885, ASTM D613

• Rapid Volumetric or Gravimetric Blending

• Precision of 0.02 mL or 0.02 gm

• Reduced Operator Errors

• Simple Operation

• Improved Precision of Octane/Cetane Results

• Fully Automated Preparation of: PRF1, PRF2, TFS, U Blends, T Blends

• Motor Driven Laser Detector of Burette Meniscus Volume

• Precision Balance for Gravimetric Measurement

• Space Saving, Small FootPrint Cabinet

Safe, Simple Operation:No electrical or combustion concerns inside the blending cabinet. The vacuum pump may be mounting in virtually any location for optimal safety.

Easy Set Up & Compact DesignOne single steel cabinet containing all components attaches easily to a wall by two hanger brackets. Cabinet measures only 20”x 40”x 6”. The vacuum pump plugs into any 115 VAC outlet (220v Adapter available), and remote foot switch plugs into vacuum pump.

Minimal Plumbing RequiredAll fluid connections reside inside thesteel cabinet; only feed lines to each fuel blend need be attached.

Improved Blending AccuracyPrecision calibrated 400ml burettes offer better volume visibility. This along with precision burette calibrations and dripless spouts provide accurate volumetric dispensing.

Easy MaintenanceSimplicity of design guarantees minimal maintenance.

Increased Blending EconomyFour individual catch bottles collect overflow from each burette, allowing for reclamation of fuel standards.

www.biolab.com.tr88

IRXpert Gasoline Analyzer

Maximizing Ease of UseTesting fuels right from the street. A high end full color touch-screen facilitates menu navigation and allows in depth spectrum analysis. USB and Ethernet interfaces facilitate quick data-transfer, printing, LIMS integration and remote control and service. For field use, the MINISCAN IRXpert can be run with a 12V car adapter.

PROPERTIESRON:MON:AKI:Distillation : Evaporation :

RVP & DVPE:Density:Precision (Density):Driveabilty IndexVOC Emissions CalculatorVapor Lock Index (VLI)Unlimited User-Defined Parameters

Range1)

80 - 11075 - 10577 - 107IBP, T10, T50, T90, FBPE70, E100, E150 (°C)E200, E300 (°F)40 - 105 kPa0 - 3 g/cm3

r s.d. = ± 0.0005 g/cm3

OXYGENATESMTBE:TAME:ETBE:DIPE:Methanol:Ethanol:

AROMATICS Benzene:Toluene:o, p, m-Xylene:Ethyl benzene:Propyl benzene:Mesitylene:Durene: Naphthalene:Pseudocumene:2,3,4 -Ethyl toluene:Other Aromatics:

Range2) m%0 - 10%0 - 20% 0 - 20%0 - 20%0 - 20%0 - 20%0 - 20%0 - 10%0 - 20%0 - 20%0 - 20%

OCTANE BOOSTERSMMT (mg/l):DCPD:N-Me-Aniline:Nitromethane:Sec-Butylacetate: Dimethylcarbonate:Dimethoxymethane:

Range2)

0 - 10,0000 - 15 m%0 - 5 m%0 - 9 m%0 - 10 m%0 - 10 m%0 - 10 m%

TOTAL PARAMETERSOxygen:Aromatics:Saturates:Olefins:Di-Olefins:

Range2)

0 - 12 m%0 - 60 m%0 - 100 m%0 - 80 m%0 - 20 m%

Range2) m%0 - 20%0 - 20%0 - 20%0 - 20%0 - 15%0 - 40%

0 - 20%0 - 25%0 - 25%0 - 20%

Iso-Propanol:2-Butanol:tert-Butanol:Other Oxygenates:

Standards ASTM D5845, D6277, D7777, D7806, EN 238, EN 14078, ISO 15212Property analysis based on ASTM D86, D323, D5191, D6378, D613, D2699, D2700, ISO 3405, 5163, 5164, 5165, EN 13016


IRXpert Diesel Analyzer

Features• Portable Mid-FTIR & Near-FTIR Analyzer for Gasoline, Diesel and Biofuel Blends

• Full Spectrum: 12,900 Data Points

• Superior Optical Resolution: 2cm-1

• Temperature & Laser Regulated System

• Unlimited Number of Parameters

• Self-learning Chemometrics

• WORKS ™ - Worldwide Online Remote Control and Services

Maximizing Ease of UseTesting fuels right from the street. A high end full color touch-screen facilitates menu navigation and allows in depth spectrum analysis. USB and Ethernet interfaces facili-tate quick data-transfer, printing, LIMS integration and remote control and service. For field use, the MINISCAN IRXpert can be run with a 12V car adapter.

PROPERTIESCetane Number:Cetane Index:Kinematic Viscosity @40°C:Dynamic Viscosity @40°C:CFPP:Distillation / Recovery:

Density:Precision (Density):

Range 1)

20 - 8020 - 80

0 - 10 mm2/s

0 - 10 mPas-50°C to +20°CIBP, T10/50/65/85/90/95, FBP,R250, R3500 - 3 g/cm3

r s.d. = ± 0.0005 g/cm3

COMPONENTSTotal Aromatics:Poly Nuclear Aromatics:Cetane ImproverEHN, IPN:FAME / FAEE (Biofuel) in Diesel:

Range 2)

0 - 80 m%0 - 50 m%

0 - 10,000 ppm

0 - 40 v%

IRXpert PROFESSIONALThe MINISCAN IRXpert Professional is a multi-fuel analyzer, measuring all parameters of the IRXpert Gasoline and the IRXpert Diesel in a single analyzer. Both the Gasoline and the Diesel model can easily be upgraded to an IRXpert Professional.

Standards ASTM D5845, D6277, D7777, D7806, EN 238, EN 14078, ISO 15212Property analysis based on ASTM D86, D323, D5191, D6378, D613, D2699, D2700, ISO 3405, 5163, 5164, 5165, EN 13016

www.biolab.com.tr90

IROX 2000Gasoline Analyzer

PROPERTIESRON:MON:AKI:Distillation:

RVP:Driveability Index:Density:Precision of density: measurement

70 - 10570 - 9580 - 100IBP, T10, T50, T90, FBPE200, E300 (°F)35 - 95 kPa950 - 13800.500 - 1,999 g/cm3

± 0.001 g/cm3

(SD = ± 0.0005 g/cm3)COMPONENTSMMT:Nitromethane:DCPD:

45 - 10,000 ppm0 - 9%0 - 10%

OXYGENATESMTBE:TAME:ETBE:DIPE:Methanol:Ethanol:Iso-Propanol:2-Butanol:ter-Butanol:

0 - 20%0 - 20%0 - 20%0 - 20%0 - 15%0 - 25%0 - 20%0 - 25%0 - 25%

AROMATICS Benzene:Toluene:o-Xylene:p-Xylene:m-Xylene:Ethyl benzene:Propyl benzene:2-Ethyl toluene:3-Ethyl toluene:4-Ethyl toluene:Mesitylene:Pseudocumene:Isodurene:Naphthalene:

wt% 0 - 10%0 - 20% 0 - 20%0 - 20%0 - 20%0 - 20%0 - 20%0 - 20%0 - 20%0 - 20%0 - 20%0 - 20%0 - 20%0 - 10%

TOTAL PARAMETERS *)Aromatics:Olefins:Oxygen:Saturates:

0 - 80%0 - 50%0 - 8%20 - 100%

Features• Octane (RON, MON)• MMT, Nitromethane & DCPD determination• Distillation Points• Vapor Pressure• Automatic Sample Introduction• Optional 6-position sampler• Calculation of AKI and Driveability Index • Built-in Density Meter• Small sample volume: 7ml• Fast & easy on-site calibration without PC• Laboratory and Field Applications• MINIWIN IROX-PC software

9 Specific Oxygenates(ASTM D5845)

14 Specific Aromatics and Benzene (ASTM D6277, EN238)

Total Aromatics, Oxygen, Olefins (incl. Di-Olefins) & Saturates


IROX DIESELDiesel Analyzer

Features• Cetane Number (cor. to ASTM D613)• Cetane Index (cor. to ASTM D976)• Cetane Improver • Total Aromatics (cor. to ASTM D5186)• Poly Nuclear Aromatics (PNA) (cor. to ASTM D5186)• Biodiesel content in Diesel Fuel (DIN EN 14078)• Distillation Properties: T85, T90, T95 (cor. to ASTM D86)• Built-in Density Meter• Temperature control• Full automation: sample introduction, measurement, cleaning

• No sample preparation: just insert filling tube in sample flask and press RUN• Measuring time: 3 minutes• Fast and easy on-site calibration of the correlation library in less than 4 minutes/sample• No complex technical training required• Small sample volume: 7 ml• Optional 6-position sampler• Portable for field applications (optional vehicle battery connector)• PC/printer interface• MINIWIN IROX-PC software

Parameter Range Repeatability (SD, RMSEC)

Cetane Number 25 - 75 0.8 0.6 - 0.9Cetane Index 30 - 70 0.4 0.4 - 0.6

Cetane Improver 0 – 5000 ppm - 90 ppm0 – 60 wt. % 0.5 (@25%) 0.40 – 40 wt. % 0.4 (@5%) 0.3

FAME (Biodiesel) in Diesel Fuel

0 – 40 wt. % - 0.2 (@5 v%), 0.5 (@10 v%)

EN 14078 - FAME(Bio-diesel) in Diesel Fuel

0 - 30 v % - 0.3

T85, T90, T95 - -Density@Room Temp. 0.500 - 1,999 g/cm3 ±0.001 g/cm3 ±0.0005 g/cm





0 – 40 wt. % - 0.2 (@5 v%), 0.5 (@10 v%)


0 - 30 v % - 0.3

T85, T90, T95 - -Density@Room Temp. 0.500 - 1,999 g/cm3 ±0.001 g/cm3 ±0.0005 g/cm3

Correlation to ASTM D613, D976, D5186, D5186, D86 DIN EN 14078

www.biolab.com.tr92

IROX DIESELDiesel Analyzer

Features• Cetane Number (cor. to ASTM D613)• Cetane Index (cor. to ASTM D976)• Cetane Improver • Total Aromatics (cor. to ASTM D5186)• Poly Nuclear Aromatics (PNA) (cor. to ASTM D5186)• Biodiesel content in Diesel Fuel (DIN EN 14078)• Distillation Properties: T85, T90, T95 (cor. to ASTM D86)• Built-in Density Meter• Temperature control• Full automation: sample introduction, measurement, cleaning

• No sample preparation: just insert filling tube in sample flask and press RUN• Measuring time: 3 minutes• Fast and easy on-site calibration of the correlation library in less than 4 minutes/sample• No complex technical training required• Small sample volume: 7 ml• Optional 6-position sampler• Portable for field applications (optional vehicle battery connector)• PC/printer interface• MINIWIN IROX-PC software





0 – 40 wt. % - 0.2 (@5 v%), 0.5 (@10 v%)


0 - 30 v % - 0.3

T85, T90, T95 - -Density@Room Temp. 0.500 - 1,999 g/cm3 ±0.001 g/cm3 ±0.0005 g/cm





0 – 40 wt. % - 0.2 (@5 v%), 0.5 (@10 v%)


0 - 30 v % - 0.3

T85, T90, T95 - -Density@Room Temp. 0.500 - 1,999 g/cm3 ±0.001 g/cm3 ±0.0005 g/cm3

Correlation to ASTM D613, D976, D5186, D5186, D86 DIN EN 14078

MINIWIN IROXfor Fuel Analysis

With MINIWIN, you have complete control over your IROX analyzer:• Remote Control from your PC: Set sample name and select groups, start measurements immediately

• Download and adapt libraries, add or delete parameters

• Microsoft® .net™ framework allows for client server capabilities and linking instruments through the PC over the internet

• Spectrum comparison: Download, review and comparison of fuel spectra at the push of a single button – showing clear colors & high resolution

.net™ Framework:

Zoom in on Spectra

Set Marker

Compare Spectra


Vapor Pressure Analyzers

MINIVAP VPXpert Vapor Pressure TesterMINIVAP VPXpert-L Vapor Pressure TesterMINIVAP LPG Vapor Pressure TesterMINIVAP ON-LINE The RVP Profit Analyzer

ASTM D5191, D5188, D6377, D6378,

D6897, EN 13016-1+2, IP 394, 409, 481,

JIS K2258-2, SHT 0769, GOST 52340


ASTM D323, D1267, D4953, D5482

MINIVAP VPXpert Vapor Pressure Tester

Features• US EPA approved test method for highest accuracy

• No vacuum pump or sample preparation

• Integrated shaker - ready to use for Crude Oil and ASTM D5188 tests

• Highly precise results for RVPE, DVPE, ASVP, AVP, Ptot, Pabs, Pgas, T(V/L), TVP

• USB printer support and LIMS data transfer

• Smallest sample size (1 ml w/o rinsing)

• 5 minutes measuring time

• Maintenance free, heavy duty measurement cell

• Automatic piston lubrication

• True one button usability

• Enhanced report generation

• Portable and rugged design for field use

• Large, durable display

• User access control

• Audit trailing

• Barcode-Reader functionality

Complies With• ASTM D5191 (Dry Vapor Pressure Equivalent)

• ASTM D6378 Vapor Pressure of Gasoline (VP4)

• ASTM D6377 Vapor Pressure of Crude Oil

• ASTM D6897 Vapor Pressure of LPG up to 1000 kPa (VPXpert only)

• ASTM D5188 (V/L-Ratio)

• EN 13016-1 (Air Saturated Vapor Pressure)

• EN 13016-2 (Absolute Vapor Pressure)

• IP 394 & 409 & 481

• JIS K2258-2, SHT 0769, GOST 52340

• US EPA approved Grabner test method for highest accuracy

Excellent Correlation to• ASTM D323 (Wet Reid) ASTM D4953 (Dry Reid)

• ASTM D5482 (Mini-Method, atmospheric) Product | Small | MINIVAP VPXpert

• ASTM D1267 (LPG)

www.biolab.com.tr96

Direct/Indirect VP, ASTM D5191, D5188,D6377, D6378, EN 13016-1+2, IP 394, 409, 481, JIS K2258-2, SHT 0769, GOST 52340

Excellent correlation to ASTM D323, D2879, D4953, D5482

MINIVAP VPXpert-L Vapor Pressure Tester

NEW! Low Volatility Model VPXpert-LMINIVAP VPXpert-L was developed to automate the manual ASTM D2879 Standard Test Method for Vapor Pressure by Isoteniscope used by the chemical industry. The MINIVAP VPXpert-L analyzer measures gasoline, jet fuels, solvents and chemicals as well as food, flavor and fragrance products with vastly improved precision. The analyzer is optimized for a pressure range from 0.1 to 100 kPa and shows a measuring repeatability better than 0.1 kPa. The instrument incorporates a direct and an extrapolated method for absolute vapor pressure measurement of single- and multi-component samples.







• ASTM D5482 (Mini-Method, atmospheric) Product | Small |VPXpert


VPXpert-L Low Volatility Tester Correlation to• ASTM D2879 (Isoteniscope method)

• REACH static vapor pressure test method



• IP 394 & 409 & 481

• JIS K2258-2, SHT 0769, GOST 52340


ASTM D5191, D5188, D6377, D6378,

D6897, EN 13016-1+2, IP 394, 409, 481,

JIS K2258-2, SHT 0769, GOST 52340


ASTM D323, D1267, D4953, D5482

MINIVAP VPXpert Vapor Pressure Tester

Features• US EPA approved test method for highest accuracy

• No vacuum pump or sample preparation

• Integrated shaker - ready to use for Crude Oil and ASTM D5188 tests

• Highly precise results for RVPE, DVPE, ASVP, AVP, Ptot, Pabs, Pgas, T(V/L), TVP

• USB printer support and LIMS data transfer

• Smallest sample size (1 ml w/o rinsing)

• 5 minutes measuring time

• Maintenance free, heavy duty measurement cell


• True one button usability

• Enhanced report generation

• Portable and rugged design for field use

• Large, durable display

• User access control

• Audit trailing

• Barcode-Reader functionality








• IP 394 & 409 & 481

• JIS K2258-2, SHT 0769, GOST 52340



• ASTM D5482 (Mini-Method, atmospheric) Product | Small | MINIVAP VPXpert


Direct/Indirect VP, ASTM D5191, D5188,D6377, D6378, EN 13016-1+2, IP 394, 409, 481, JIS K2258-2, SHT 0769, GOST 52340

Excellent correlation to ASTM D323, D2879, D4953, D5482

MINIVAP VPXpert-L Vapor Pressure Tester

NEW! Low Volatility Model VPXpert-LMINIVAP VPXpert-L was developed to automate the manual ASTM D2879 Standard Test Method for Vapor Pressure by Isoteniscope used by the chemical industry. The MINIVAP VPXpert-L analyzer measures gasoline, jet fuels, solvents and chemicals as well as food, flavor and fragrance products with vastly improved precision. The analyzer is optimized for a pressure range from 0.1 to 100 kPa and shows a measuring repeatability better than 0.1 kPa. The instrument incorporates a direct and an extrapolated method for absolute vapor pressure measurement of single- and multi-component samples.







• ASTM D5482 (Mini-Method, atmospheric) Product | Small |VPXpert


VPXpert-L Low Volatility Tester Correlation to• ASTM D2879 (Isoteniscope method)

• REACH static vapor pressure test method



• IP 394 & 409 & 481

• JIS K2258-2, SHT 0769, GOST 52340



ASTM D6897 Single Expansion MethodASTM D6897 revolutionizes the vapor pressure measurement of Liquefied Petroleum Gas (LPG). It replaces the manual bomb method ASTM D1267, presenting results with an excellent correlation, but with a highly improved repeatability and reproducibility.

ASTM D6897, D1267

MINIVAP LPGVapor Pressure Tester

Features• ASTM D6897, D1267

• Repeatability (ASTM D6897): ± 7.4 kPa (1.1 psi) or better

• Only 15 mL of sample for complete measurement

• Accurate determination of LPG vapor pressure

• Fully automatic measurement

• No accessories required

• Built-in diagnostic and safety features

• Fast measurement: only 5 minutes

• Automatic multiple point measurement

• Built-in RS 232 Interface for printer or computer

• Wide temperature range of 5 to 70 °C

• Small and rugged portable tester

• Optional 12V DC battery operation for field use

Easy, Quick & Reliable Analysis of Liquefied Petroleum GasMINIVAP LPG is a stand-alone unit for the automatic vapor pressure determination of liquefied petroleum products. Analyze is done in less than 5 minutes using overall only 15 mL of sample for measurement and rinsing. The instrument offers safe and easy operation and reduces environmental pollution. Automatic sample introduction, built in Peltier temperature regulation and a pre-programmed rinsing cycle eliminate any manual operation or cleaning. The ease of use of the instrument allows for installation and operation without any special training. The vapor pressure is determined with high precision in a presetable temperature range of 5 to 70 °C. Pressures may be measured up to 2000 kPa (290 psi).

MINIVAP LPG allows fast and fully automated measurement avoiding any operator bias and saving a significant amount of time and money for the users.

www.biolab.com.tr98

ASTM D6897 Single Expansion MethodASTM D6897 revolutionizes the vapor pressure measurement of Liquefied Petroleum Gas (LPG). It replaces the manual bomb method ASTM D1267, presenting results with an excellent correlation, but with a highly improved repeatability and reproducibility.

ASTM D6897, D1267

MINIVAP LPGVapor Pressure Tester

Features• ASTM D6897, D1267

• Repeatability (ASTM D6897): ± 7.4 kPa (1.1 psi) or better

• Only 15 mL of sample for complete measurement

• Accurate determination of LPG vapor pressure

• Fully automatic measurement

• No accessories required


• Fast measurement: only 5 minutes

• Automatic multiple point measurement

• Built-in RS 232 Interface for printer or computer

• Wide temperature range of 5 to 70 °C

• Small and rugged portable tester

• Optional 12V DC battery operation for field use

Easy, Quick & Reliable Analysis of Liquefied Petroleum GasMINIVAP LPG is a stand-alone unit for the automatic vapor pressure determination of liquefied petroleum products. Analyze is done in less than 5 minutes using overall only 15 mL of sample for measurement and rinsing. The instrument offers safe and easy operation and reduces environmental pollution. Automatic sample introduction, built in Peltier temperature regulation and a pre-programmed rinsing cycle eliminate any manual operation or cleaning. The ease of use of the instrument allows for installation and operation without any special training. The vapor pressure is determined with high precision in a presetable temperature range of 5 to 70 °C. Pressures may be measured up to 2000 kPa (290 psi).

MINIVAP LPG allows fast and fully automated measurement avoiding any operator bias and saving a significant amount of time and money for the users.

MINIVAP ON-LINEThe RVP Profit Analyzer

StandardsVapor Pressure of Gasoline

• ASTM D6378, D5191, D4953/323 (corr.)

• ASTM D5188 (V/L = 20)

• EN 13016-1+2

• IP 394

• IP 409

Vapor Pressure of Crude Oil

• ASTM D6377, D323 (corr.)

Vapor Pressure of LPG

• ASTM D6897, D1267 (corr.)

Key Benefits• One analyzer for all vapor pressure standards

• Highest profits through best precision

• Quality inspection of fuels

• New and improved maintenance

• Automatic calibration with laboratory precision

Features• Highest precision and performance

• US-EPA and CARB approved method

• Explosion proof Type X or ATEX purging system

• Fully automatic calibration, verification and pressure correction

• Only 10 ml of sample for a complete measurement

• 7 minutes cycle time


• Data transfer via serial interface RS 232

• ASCII code and MODBUS communication protocol

• Optional 4-20 mA analog data output

• Remote control via central controller


• Peltier cooling

• Modular arrangement

• Multiple sample streams

• Maintenance free sample conditioning systems - self cleaning filters

• Optional sample recovery system & analyzer shelters

• No accessories required for start-up

Vapor Pressure of Gasoline:ASTM D6378, D5191, D4953/323 (corr.), D5188 (V/L = 20)EN 13016-1+2IP 394, IP 409Vapor Pressure of Crude Oil:ASTM D6377, D323 (corr.)Vapor Pressure of LPG:ASTM D6897, D1267 (corr.)


Flash Point Testers

MINIFLASH TOUCH Flash Point TesterMINIFLASH FLP/H/L Automatic Flash Point TesterMINIFLASH FLA/H Flash Point TesterSemi-Automatic Open Cup Cleveland Flash Point Tester

MINIFLASH TOUCH Flash Point Tester

Features• Intuitive Menu Navigation on Large Color Touch-Screen

• Runs on Microsoft® Windows®

• Full network, PC and LIMS integration via LAN

• USB printer support

• USB data transfer

• Extended FLPH temperature range (0-400°C with external cooling)

• User Rights Management (GLP)

• Unlimited number of methods and results

• Automatic ignition cleaning program

Available Methods• ASTM D6450 & D7094

• Excellent correlation to Pensky Martens Method - ASTM D93, ISO 2719, DIN 51758, IP 34, JIS K 2265 TAG Closed Cup Method - ASTM D56 Abel Closed Cup - ISO 13736, IP 170

• Excellent correlation to Equilibrium and Small Scale Methods EN ISO 3679/3680, ASTM D3828 A/B, IP 523/IP 524

• Fuel Dilution Flashpoint Testing

• Flash / No Flash methods

• Fast screening methods

MiniFlash Tester Line• Maximum Safety, No Open Flame

• 1-2 ml Sample Size

• Automatic Stand-Alone Operation

• Fast and Accurate

• Easy to use, Easy to clean

• Portable for Field Use

• US D.O.T, RCRA, NAVY, NATO approved

• Approved for various ASTM specifications for fuels and oils

Excellent correlation to Pensky Martens Method ASTM D93, ISO 2719, DIN 51758, IP 34, JIS K2265TAG Closed Cup Method ASTM D56 Abel Closed Cup - ISO 13736, IP 170

Excellent correlation to Equilibrium and Small Scale Methods EN ISO 3679 / 3680, ASTM D3828 A / B, IP 523 / IP 524

Applications• Petrochemistry

• Flavors & Fragrances

• Transportation

• Military

• Waste Disposal

•Heavy Duty Machinery (Mining, Construction...)

www.biolab.com.tr102

MINIFLASH FLP/H/LAutomatic Flash Point Tester

Features• ASTM D6450 & D7094

• Excellent correlation to ASTM D93, D56 and ISO 2719

• Maximum Safety - Continuously Closed Cup

• Built-in Peltier temperature control

• Small sample volume of only 1-2 mL

• Fully automated, fast measurement

• Easy cleaning, no solvents required

• Almost no waste

• Laboratory and field applications

• RS232 interface

• MINIWIN software (for PC)

Applications• Petrochemistry

• Pharmacy

• Transport

• Flavors and Fragrances

• Paints and Varnishes

• Waste Disposal

• Fuel Protection for Ships, Railway and Heavy Duty Machinery (Mining, Construction), ...

• Military (Approved by US D.O.T. and RCRA Specified for use by NATO, US NAVY, US Marines)

ASTM D6450 & D7094Excellent correlation to ASTM D93, D56 and ISO 2719

Technical SpecificaitonsRecommended Temperature Range

MINIFLASH FLPL -25 to 100°C

MINIFLASH FLP 0 to 200°C

MINIFLASH FLPH 10 to 400°C

Power requirements: 100/110/230 V AC 50/60 Hz, 150 W

Dimensions W x H x D: 196 x 315 x 175 mm


MINIFLASH FLA/H Flash Point Tester

Features• Fully Automatic 8 Position Sampler• 4 min. Manipulation Time for 8 Samples• Continuous Operation - up to 80 Samples per Day!• Maximum Safety through Ignition Protection Technology™: only 1-2 ml sample, no open flame, continuously closed cup, no offensive vapors in the lab• Approved by: US D.O.T. and RCRA• Approved by: NATO; 6630-25-145-3256, 6630-25-146-0895, 6630-01-534-1774 and the US NAVY - NSN: 6625-01-472-6783• Approved for Diesel Fuel and Kerosene specifications ASTM D975, D396, D2880, D3699 • Approved for the ASTM specifications of recycled fuel and biodiesel

• The world wide standard in the flavors and fragrances industry• The highest precision• Short measuring time (depends on sample type) due to small sample volume of 1-2 ml• Fast thermoelectric temperature regulation by Peltier Protection Technology™• Easiest handling (instrument-user dialogue) and fast cleaning of the sample cup• Wide Measuring Range: 0 to 400°C • Compact & portable for field use (car battery connector)• RS232 interface and MINIWIN software for PC)


Complies with the latest flashpoint standard ASTM D7094 - MC CCFP (Flash-Point by Modified Continuously Closed Cup) and ASTM D6450 - CCCFP (Flash-Point by Continuously Closed Cup)Excellent Correlation to ASTM D93, D56, ISO 2719 (EN/DIN 22719), ISO 13736, IP 170

Recommended Temperature Range

MINIFLASH FLA 0 to 200°C

MINIFLASH FLAH 10 to 400°C

Power Requirements 100/110/230 V AC 50/60 Hz, 150 W

Dimensions W x H x D 312 x 402 x 390 mm


Semi-Automatic Open CupCleveland Flash Point Tester

Features• Operating Temperature Range ; Ambient to - 400°C

• Semi-Automatic Analyzer

• Electric motor controller, gas control valve test flame practitioners

• Alternatively, the opportunity to work with Gas, LPG and Natural Gas

• LCD Display

• Easy with digital thermometer temperature monitoring

• Three side closed removable wind protector

• Brass material sample cup

• 220V, 50Hz, Electric Heater Controller

• Dimensions 40 x 30 x 30cm

• Weight: ~ 6.5 kg

• Power: Max. 500 Watt

Conforms to ASTM D92 Test Method

Flash and Fire Point by Cleveland Open Cup TesterThis test method describes the determination of the flash and fire pointof petroleum products with flash pointsabove 79°C and below 400°C except fuel oils.


Sulfur Analysis

Phoenix II - Direct Excitation Bench-Top ED-XRF AnalyzerSindie OTG Portable Sulfur AnalyzerSindie 7039 G3 Bench-Top Sulfur AnalyzerSindie 2622 Bench-Top Sulfur AnalyzerSindie On-Line Sulfur AnalyzerSindie Turn-Key Sulfur AnalyzerTitra-Max Titrator Mercaptan Sulphur AnalyzerH2S Analyzer


IP 496, 336

ISO 8217, 8754, 20847

Phoenix II - Direct Excitation Bench-Top ED-XRF Analyzer

Excitation• Polarized X-ray excitation

• HOPG Crystal (Highly Oriented Pyrolytic Graphite)

• One moveable secondary target

• End-window X-ray tube

• Max voltage, 48 kV

• Max power, 50 W

Detection Systems• Rugged gas-filled proportional counter detector

• Automatic energy drift compensation

• Up to 5 moveable filters (optional)

• Low cost of ownership

Sample Chamber• Single position (30mm cups)

• Bulk or flat samples (12 x 12 x 3 cm)

• Analysis of solids, liquids, powders, pastes, slurries, coatings, films, filter deposits

• Sample Spinner (optional)

Software/User Interface• Touch-screen display

• Embedded Panel PC computer

• Password protection

• Windows™ operating system

• USB and Ethernet connections

• Networking capability

• External monitor connection

• Onboard thermal printer

Spectrometer DataVoltage: 115-220 VAC ±10% , 60W, 50/60Hz

Dimensions (W x D x H): 38 x 46 x 31 cm

Weight: 18 kg

Sample Chamber



IP 496, 336

ISO 8217, 8754, 20847

Phoenix II - Direct Excitation Bench-Top ED-XRF Analyzer

Excitation• Polarized X-ray excitation

• HOPG Crystal (Highly Oriented Pyrolytic Graphite)

• One moveable secondary target

• End-window X-ray tube

• Max voltage, 48 kV

• Max power, 50 W

Detection Systems• Rugged gas-filled proportional counter detector

• Automatic energy drift compensation

• Up to 5 moveable filters (optional)

• Low cost of ownership

Sample Chamber• Single position (30mm cups)

• Bulk or flat samples (12 x 12 x 3 cm)

• Analysis of solids, liquids, powders, pastes, slurries, coatings, films, filter deposits

• Sample Spinner (optional)

Software/User Interface• Touch-screen display

• Embedded Panel PC computer

• Password protection

• Windows™ operating system

• USB and Ethernet connections

• Networking capability

• External monitor connection

• Onboard thermal printer

Spectrometer DataVoltage: 115-220 VAC ±10% , 60W, 50/60Hz

Dimensions (W x D x H): 38 x 46 x 31 cm

Weight: 18 kg

Sample Chamber

ASTM D7039, ISO 20884

Sindie OTG Portable Sulfur Analyzer

Application Areas:• Total sulfur analysis from ultra low sulfur fuels up to crude.

• For refinery labs, pipeline terminals, on-board use, additive plants, testing vans and inspection laboratories.

• Complies with ASTM D7039 & ISO 20884.

Features and Benefits:• Fits on any bench and compatible for use in mobile labs/vans.

• Dimensions: 33 x 30 x 23 cm.

• Weight: 15 kg.

• Utility: Standard wall power: 100-120 VAC and 200-240 VAC.

• No need for gases, no high temp. operating conditions.

• LOD: 0.6 ppm (at measurement time: 900 s.)

• Dynamic Range: up to 10%.

• User Interface: Touch Screen.

• ACCU-CELL pre-assembled sample cups for enhanced precision, operator ease-of-use and increased productivity.


• One calibration curve will run both diesel and gasoline.

• Extremely low maintenance: No conversion gases, heating elements, quartz tubes or columns.

• Robust polyamide windows for easycleaning



• No assembly of separate film & cup components

• Pre-vented sample cups

• Eliminates sample & cup contamination

• 1 ml pipette will fill the cup


Complies with

ASTM D7039 and ISO 20884.

Sindie 7039 G3Bench-Top Sulfur Analyzer

Application Areas:• Total sulfur analysis from ultra low sulfur fuels to crudes.

• For use in refinery labs, pipeline terminals, additive plants, testing vans and inspection laboratories.

• Complies with ASTM D7039 & ISO 20884.

Features and Benefits:• LOD: 0.15 ppm at 300 s.

• Dynamic Range: Standard: 0.15 ppm to 3000 ppm XR package: 0.15 ppm to 10%

• Available with 8 cell auto-sampler.

• Fits on any bench and compatible for use in mobile labs/vans.

• Plug-it-in and measure:

power is only utility.

• Touch screen user interface.

• Utilizes ACCU-CELL pre-assembled and pre-vented sample cups for enhanced precision, extreme ease-of-use and enhanced productivity.


• One calibration curve will run both diesel and gasoline up to 3000 ppm.

• No conversion gases, heating elements, quartz tubes or columns.


• Robust polyamide window for easy cleaning.



SINDIE Autosampler

• 8 sample cell capacity• Increases productivity• Utilizes XOS Accu-Cell cups


Complies with

ASTM D2622, D7039 &

ISO 20884

Sindie 2622Bench-Top Sulfur Analyzer

Application Areas• Total sulfur analysis from ultra low sulfur fuels to crudes.• For use in refinery labs, pipeline terminals, additive plants & inspection laboratories.• Complies with ASTM D2622, D7039 and ISO 20884.Features and Benefits• LOD: 0.4 ppm at 300 s.• Dynamic Range: 0.4 ppm to 10%• Fits on any bench: (w x d x h) 37 x 50 x 34 cm • Plug-it-in and measure: power is only utility.• Touch Screen user interface.• User programmable measurement time: 30-900 s.• Two calibrations covers both gasoline and diesel matrices over full dynamic range: - 0.4 – 3000 ppm wt - 0.3 – 10% wt• No conversion gases, heating elements, quartz tubes or columns.• 75 W air-cooled excitation tube.• Robust polyamide window for easy cleaning.Options• LIMS data output software capability.

Sulfur Analysis with Compliance Flexibility2622 bench-top sulfur analyzer complies with ASTM D2622, D7039 & ISO 20884 test methods, enabling complete flexibility in sulfur analysis. There ’re no compromises in detection, performance & reliability 2622 analyzer is the ideal sulfur analytical solution from ultra low sulfur diesel and gasoline to heavy fuel oil and crudes. One analyzer with three compliance solutions.

(ppm)r R

4 0.4 1.08 0.7 1.2

15 0.9 1.7100 3 6500 6 12

PrecisionTypical repeatability(r) & reproducibility (R) values in diesel fuel, at 95% confidence. 300s measurement time.


Sindie On-LineSulfur Analyzer

Benefits• Total sulfur determination by MWD XRF

• Measurement time: 30 seconds to 5 minutes, user programmable

• No consumables, gases or high temperature processes

• Extremely low maintenance

• Modular design for plug-and-go operation

• Also available in bench-top format

Applications • Pipeline terminals: interface cuts and tank contamination prevention

• Refinery: hydrotreating, hydrofiner and blending processes

Total Sulfur Analysis• From 0.6 ppm to 3000 ppm in diesel, gasoline, naphtha and kerosene

Features • Excellent detection capability: LOD: 0.6 ppm

• Dynamic range from 0.6 ppm – 3000 ppm sulfur

• Continuous monitoring with programmable response times:

-10 seconds: ideal for pipeline interface cuts

- 5 minutes: for most demanding refinery processes

• Direct measurement without sample conversion Analysis in ppm (wt)

• No density conversion needed

• No consumable gases required

• Extremely low maintenance:

- No heating elements

- No quartz tubing

- No columns

• Dynamic window module design is operator independent and ensures measurement stability

• Robust industrial design: wall mounted or stand alone

• Outstanding linearity: One calibration curve for diesel and gasoline matrixes, over full dynamic range

• Compact footprint ( w x d x h) 61 x 44 x 165 cm


Sindie Turn-KeySulfur Analyzer

Features • Direct measurement without sample conversion• Analysis in ppm (wt)• Excellent detection capability: LOD 0.6ppm• Dynamic range from 0.6 ppm – 3000ppm sulfur• No density conversion needed• No consumable gases required• Extremely low maintenance: No heating elements, quartz tubing and columns• Dynamic window module design is operator independent and ensures measurement stability• Pre-engineered for economical installation. Requires only pad site, utilities and sample connections.• Outstanding linearity: One calibration curve for diesel and gasoline matrixes, over full dynamic range• Eliminates on-site analyzer variables,e.g. sample pressure, flow, sample conditioning.• Reduces maintenance and operational complexity.• System optimization for terminal operations• Broad environmental operating range• System design maximizes fast response

Benefits• Fully Integrated On-Line Sulfur Analysis Solution includes shelter, sample management & purge air supply• Pre-engineered for rapid installation, robust operation & optimal results• Continuous sulfur measurement truly on-line (not “at-line”)• Total sulfur by MWD-XRF D7039 “direct” measurement no sample injection or combustion involved.• Designed for terminals and pipelines• Two (2) simultaneous outputs: - (~10 sec) Rapid measurements for determination of contamination & interface detection - (~300 sec) Precise measurements for regulatory protection and quality assurance

Applications• Pipelines• Terminals• Refiners• Blending Applications

Total Sulfur Analysis• From 0.6 ppm to 3000 ppm in diesel, gasoline, naphtha and kerosene

Total sulfur by MWD-XRF – ASTM D7039

“direct” measurement


Titra-Max TitratorMercaptan Sulfur Analyzer

The Titra-Max titrator is used for the analysis of:• TAN (Total Acid Number)

• TBN (Total Base Number)

• Mercaptan Sulfur

• Analysis of petroleum products, lubricants and transformer insulating oils.

Features and Benefits• User friendly auto titration system.

• User selectable End Point mode.

• Compliant to ASTM methods for TAN/TBN analysis of oil samples. Mercaptan sulfur titration method as standard.

• Interchangeable burette assemblies with intelligent volume recognition system.

• Vortex mixing system for vigorous and homogeneous stirring of viscous samples.

• Alphanumeric entry of all method parameters & sample data that ensures GLP compliance.

• Pre-programmed ASTM methods for easy operation.

• Two tier password protection, Administrator and User for method editing.

• User selectable report formats – Titration analysis reports, Method parameters, Data table, Titration curves, etc..

• Full reprocessing and statistical analysis of run data including first & second derivative graphical report.

• Balance interface for weight data transfer.

• Data download to PC.

Easy Installation in 3 StepsBurette Assembly: Slot in the burette assembly, screw in the connector pin and connect the communication cable between the burette and controller unit. Automatic recognition shown on screen.

System Priming: Insert titrant tubing line to titrant bottle and prime as per manual instructions. The Titramax is now ready to use.

Titration Vesse: Fit electrode, titrant input line and vortex stirrer into the titration vessel.

Conforms to ASTM D664, D2896,

D4739 and D3227


H2S in Liquids Analyzer

Features• Fast Analysis of H2S in Crude, Water, Diesel, Gasoline & other liquids

• Specific only to H2S - No interference

• Surpasses IP 570/12a with Greater Precision, Faster Analysis & H2S Specific

• Direct Read LCD with Digital Graphs, Historical Data

• No Field Calibrations Required

• PPB, PPM & % H2S Level Analysis

• 205 Awarded ‘Preferred Vendor’ by Saudi Aramco, Chevron & others

• Small bench top footprint

Description & Principle of OperationThe ability to analytically quantify H2S in liquids, such as naphtha, water, crude oil, diesel and gasoline are enhanced with the Sample Transfer StripperTM (STS) exclusive ASI Membrane Technology and ratiometric colorimetric technologies.The principle of operation requires a continuously recycled sample in a heated compartment where the STS unit separates the H2S from the liquid sample with better than 99% efficiency. An H2S free air or

nitrogen carrier then continuously sweeps the H2S gas sample to the H2S analyzer for quantitative analysis in ppbw, ppmw, and up to saturation levels. The detection technology is based on chemically specific density changes. The lead acetate sensing tape utilized in our analyzers is the only detection method that is specific to H2S. Optical illumination & detection are integrated for maximum resolution and accuracy. Analysis time is rapid without compromising precision. This reliable and field proven analyzer system continuously and specifically quantifies the H2S level in the sample with minimal maintenance. The principle of operation is described in various ASTM methods include D4084-82, D4468-85 and D4045-81.

Applications• Refinery Laboratories

• Fuel Terminal Operators

• Vessel/Tank Storage Terminals

• Loading and Offloading Crude Oil

• Inspection laboratories

• Independent testing laboratories

ASTM Approved Methods

D4045-81, D4084-07, D4468-85

Titra-Max TitratorMercaptan Sulfur Analyzer

The Titra-Max titrator is used for the analysis of:• TAN (Total Acid Number)

• TBN (Total Base Number)

• Mercaptan Sulfur

• Analysis of petroleum products, lubricants and transformer insulating oils.

Features and Benefits• User friendly auto titration system.

• User selectable End Point mode.

• Compliant to ASTM methods for TAN/TBN analysis of oil samples. Mercaptan sulfur titration method as standard.

• Interchangeable burette assemblies with intelligent volume recognition system.

• Vortex mixing system for vigorous and homogeneous stirring of viscous samples.

• Alphanumeric entry of all method parameters & sample data that ensures GLP compliance.

• Pre-programmed ASTM methods for easy operation.

• Two tier password protection, Administrator and User for method editing.

• User selectable report formats – Titration analysis reports, Method parameters, Data table, Titration curves, etc..

• Full reprocessing and statistical analysis of run data including first & second derivative graphical report.

• Balance interface for weight data transfer.

• Data download to PC.

Easy Installation in 3 StepsBurette Assembly: Slot in the burette assembly, screw in the connector pin and connect the communication cable between the burette and controller unit. Automatic recognition shown on screen.

System Priming: Insert titrant tubing line to titrant bottle and prime as per manual instructions. The Titramax is now ready to use.

Titration Vesse: Fit electrode, titrant input line and vortex stirrer into the titration vessel.


D4739 and D3227

H2S in Liquids Analyzer

Features• Fast Analysis of H2S in Crude, Water, Diesel, Gasoline & other liquids

• Specific only to H2S - No interference

• Surpasses IP 570/12a with Greater Precision, Faster Analysis & H2S Specific

• Direct Read LCD with Digital Graphs, Historical Data

• No Field Calibrations Required

• PPB, PPM & % H2S Level Analysis

• 205 Awarded ‘Preferred Vendor’ by Saudi Aramco, Chevron & others

• Small bench top footprint

Description & Principle of OperationThe ability to analytically quantify H2S in liquids, such as naphtha, water, crude oil, diesel and gasoline are enhanced with the Sample Transfer StripperTM (STS) exclusive ASI Membrane Technology and ratiometric colorimetric technologies.The principle of operation requires a continuously recycled sample in a heated compartment where the STS unit separates the H2S from the liquid sample with better than 99% efficiency. An H2S free air or

nitrogen carrier then continuously sweeps the H2S gas sample to the H2S analyzer for quantitative analysis in ppbw, ppmw, and up to saturation levels. The detection technology is based on chemically specific density changes. The lead acetate sensing tape utilized in our analyzers is the only detection method that is specific to H2S. Optical illumination & detection are integrated for maximum resolution and accuracy. Analysis time is rapid without compromising precision. This reliable and field proven analyzer system continuously and specifically quantifies the H2S level in the sample with minimal maintenance. The principle of operation is described in various ASTM methods include D4084-82, D4468-85 and D4045-81.

Applications• Refinery Laboratories

• Fuel Terminal Operators

• Vessel/Tank Storage Terminals

• Loading and Offloading Crude Oil

• Inspection laboratories

• Independent testing laboratories

ASTM Approved Methods

D4045-81, D4084-07, D4468-85


Density Meter

DDM 2911 Density MeterDDM 2910 Density MeterDDM 2911 PLUS Density Meter

Automatic Density Meter, Model 2911

ApplicationAutomatic Density Meter 2911, with high precision Peltier Temperature Control of sample, has the features to meet the needs of today’s industries.

Petroleum• Measure API Values in accordance with ASTM D1250, D4052, D5002 DIN 51757

• Quality Control incoming raw materials

• Research new products and additives

• Withstands harsh and heavy use environments

• Calibrate using petroleum standards

Chemical• Measure in units of Kg/m3, g/cm3, g/ml, pounds/gallon, specific gravity, Baumé and more

• Determine concentrations in: %, molarity, normality, mole fraction, ppm, and more

• Check batch consistency and ensure proper blending ratios

• Wetted materials compatible with the most aggressive chemicals

Pharmaceutical• Capable of 2, 3, 4 or more multiple measurements with standard deviation, mean, min and max reading for true cGLP/GMP compliance

• Complete IQ/OQ/PQ documentation

• Checking of raw materials and product release

• 21CFR11 Compliance; Electronic Signature and Secure Data Storage

• Compliant with USP 29<841>, JP, BP and EP

Beverage• Measure both alcoholic and nonalcoholic beverages with easy bubble detection using Video View™

• Direct and accurate means of °Brix determination, °Plato, °Balling, % Solids

• Use apparent density function for proper filling volume monitoring

Measure API Values in accordance with ASTM D1250, D4052 & D5002 DIN 51757



2910 Density Meter

2911 PLUS Density Meter

2910 2911 2911 Plus

Measurement Ranges

Density: 0 to 3 g/cm3

Temp.: 0 °C to 95 °C

Pressure: 0 to 10 bars

Density: 0 to 3 g/cm3

Temp.: 0 °C to 90 °C(controlled via


Density:0 to 3 g/cm3

Temp.: 0 °C to 95 °C


Measurement ModesMeasurementTechnique Mechanical Oscillator Method

AccuracyDensity: 0.0001 g/cm3

Temp.: 0.05°C

Density: 0.00005 g/cm3

Temp.: 0.03 °C


Temp.: 0.03 °CEthanol Measurements

Repeatability


Temp.: 0.02 °C


Temp.: 0.01 °C

Density:0.000005 g/cm3

Temp.: Selectable to: 0.001 °C


Temp.: 0.01 °C


Temp.: Selectable to: 0.001 °C

MinimumSample Volume Less than 1mL

Materials

System viruses

Display

interface

Interface

Touch Screen User Interface, 5 – USB Ports, 2 – RS232 Ports

Video Scanningscanning camera

Auto Bubble operator of bubbles

Internal Memory 8GB Non-removable Compact Flash

Power Supply 85 to 260 VAC; 48 to 62 HzPower

Measurement Time: 30 - 60 seconds


Color Measurement

Lovibond Consistency in Color Measurement

Consistency in Color Measurement

Features• RCMSi Remote Calibration & Maintenance Service via Internet

• USB & LAN Interface

• Large clear LCD screen for ease of use and ability to display graphs and data in a wide variety of languages

• Extensive yet flexible choice of standard color scales

• Remote upgrade facility for adding scales once in service

• Allows calculation and description of off-hue status

• Gives closest match to stored references

• Generates a customized color scale from reference samples

• Robust steel construction with excellent chemical resistance

• Easy maintenance with removable sample chamber

• Supplied with color control software for data analysis

• Output conforming to GLP including date, time, sample & user ID

• Accommodates a range of sample cells and tubes

Applications• Dark Oils & Fats

• Liquid Chemicals & Industrial Oils

• Petroleum Oils & Fuels

• Beers, Malts & Caramels

• Pharmaceutical Solutions

• Industrial Oil & Surfactants

• Sugar Solutions, Syrups & Honey

• Optically Clear Samples

• Water & Waste Waters

American Standard Methods 2120 EASTM D848, D1500, D6045, D1544, D6166, D1209, D5386, D509, D156, D6045, D1925, E313, E308DIN 6162, ISO 2049CP Appendix IX A, Ph. Eur. Method 2.2.2, AOCS Cc 13a-43, AOCS Td 1a, AOCS Dd 5-92 DGK F050.2, ICUMSA GS1-7, ICUMSA GS2/3-9, JIS K 2580USP (631) Color and Achromicity


Accessories SuppliedEach unit is supplied with Windows® compatible software, optical glass cells for the included color scales, a spare lamp, instructions and an RCMSi Starter Pack.

The spectrophotometric colorimeters introduces a unique concept in liquid color control: RCMSi technology (Remote Calibration & Maintenance Service via internet).Users can benefit from the capability for remote calibration and servicing via the internet -eliminating any costs and time delays associated with servicing and guaranteeing compliance with standards.The Unit range is supplied with a full range of color scales for specific markets including, but not limited to, Petroleum, Edible Oils, Pharmaceuticals, Brewing and Honey. Users can upgrade scales remotely at any time.Every unit is supplied with color control software for data analysis (LAN & USB cable provided). Optical glass cells, a certified glass calibration filter, a spare lamp and user instructions included.

Technical SpecificationsMeasuring principle

Spectral response 420 – 710 nm

Bandwidth 20 nm

Repeatability On measurements of de-ionised water

+/– 0.0004

ΔE 0.04

Less than 20 seconds

Single key press; fully automated

Light source

Illuminants CIE illuminant A, B, C, D65.

Observer 2°, 10°

Path length 0.1 – 50 mm

Interfaces USB, LAN, RS232

Data storage 100,000+ measurements

Input voltage Universal (90 – 240 VAC), via external power supply

Compliance CE, RoHS, WEEE

Display 240 x 128, backlit graphic display, (white on blue)

Keypadpolyester with audible feedback

Languages English, French, German, Italian, Portuguese,Russian, Spanish, Chinese and Japanese

Instrument housing

Dimensions 435 x 195 x 170 mm (W x D x H)

Weight 6.8 kg


Water Content Analysis

Water Content Analysis

Cou-Lo SU KF Water Content AnalyzerKarl Fischer Volumetric TitratorModel FIDO Benchtop Heated CentrifugeDean & Stark Water in Petroleum Products & Bituminous Materials

Conforms to

ASTM D1533, D4928, D6304,

IP 386, 438, API MPMS Chapter 10.9,

IEC60814, ISO 10101-3, 10337 & 12937

Cou-Lo SU KFWater Content Analyzer

Features• Simple operation

• 10 user programmable methods

• 1ppm / 100%

• Results in ppm, mg/kg, % & μg water

• Multi language display & print out

• Small footprint

• Integral high speed printer

• Fully portable

• Low drift cell design

• Automatically compensated errors (patented technique)

• Results Manager software

• Optional carry case

Applications • Water Content • Biofuel• Residual Fuel• Fuels,• Lubricating Oil• Crude Oil

The Cou-Lo SU KF Coulometric Titrator is for water content determination from 1 microgram. Typically used for very low ppm through to low percentage levels of water. Simple operation, small footprint, integral printer, unique low drift glassware, fully portable.

Industries • Inspection• Food/Flavor/Fragrances• Pharma• Automotive• Chemical• Petroleum• Refinery• Pipeline/Terminal• Biofuel• Environmental• Aviation• Lubricants & Greases• Military• Mining• Transportation• Maintenance• Fuels & Waxes• Marine


Features• Very easy to use - intuitive keypad and function guide display• Automatic and periodic elimination of bubbles which can form in the liquid circuit• Automatic drift monitoring and compensation• Flexible - can be used with different reagent brands• 2 x 5ml syringes – one for the KF reagent and other for automatic dosing of standard for the titre (second syringe can also be used for different factor reagent or special reagents for ketones, amines, etc.) Syringe volume dispensed in 40,000 steps• 2 x built-in pumps - fitted with Viton tubing, one pump for dispensing the solvent and other for emptying the vessel• Automatic rest cycle (stand-by mode) if not used for 15 minutes• Programmable – several easy to use programs for titration and standardization• Results expressed in ppm, mg/l, %, etc.• Connects to external pc keyboard for easy text and sample information data entry• Connects to different types of printers, pc and balances• Data Logger – automatic data storage of last 55 analysis results

Karl FischerVolumetric Titrator

Conforms to ASTM D890, D1123, D1348,

D1364, D1568, D3401, D4017, D4377,

D4672, D5460, D5530 & E203

Applications• Water Content• Biofuel• Residual Fuel• Fuels• Lubricating Oil• Crude Oil

Industries• Inspection• Food/Flavor/Fragrances • Pharma• Automotive• Chemical• Petroleum• Refinery• Pipeline/Terminal• Biofuel• Environmental• Aviation• Lubricants & Greases• Military• Mining• Transportation• Maintenance• Fuels & Waxes• Marine


Complies with ASTM D91, D96(obs.), D893, D1290,

D1796, D1966, D2273, D2709, D2711, D4007,

DIN 51793, IP 75(obs.) & IP 359

Model FIDO Bench top Heated Centrifuge

Pre-heating dry block system & ASTM sample tubes (Recommended)

High Quality DesignMetal housing with metal lid and stainless steel centrifuging chamber with viewing port in the lid

Wide Range Programmable Heating Capabilities- 10 programmable memories- Infinitely variable setting from + 10 °C to + 90 °C,dependent on the ambient temperature- Pre-run internal sample Pre-heating function and sample preparation

User Friendly InstrumentTwist lock for effortless opening & closing of the lid with ergonomic control and information panel with easy rotor changing

Advanced Safety FeaturesLid locking and holdingAutomatic rotor recognitionImbalance switch-offEmergency lid lock releaseLid dropping protectionMotor overheating protection Chamber overheating protection

Pre-Heating Dry Block UnitPre-heating dry block unit with aluminum exchangeable block to accommodate 4 x ASTM sample tubes used for sample pre-heating process.

An ideal centrifuge for research and industrial laboratories offer a wide range of accessories for routine applications, while also enabling customized solutions for special requirements. Temperature control is often required in addition to the capability of accommodating special tubes. Such as tubes designed to meet the requirements of the American Society for Testing Materials (ASTM). To carry out standardized test methods for crude oil testing, the sample tubes can be centrifuged in the heatable Centrifuge at any pre-specified temperature from ambient +10 to 90°C according to the used method

For Water and Sediment Determination in Crude Oil and Petroleum Related Products


ASTM D95, D4006

IP 74, IP 358

ISO 9029

Dean & Stark Water in Petroleum Products & Bituminous Materials

ASTM D95, IP 74Water in Petroleum Products & Bituminous Materials by DistillationThis test method covers the determinationof water in the range from 0 to 25 % volume in petroleum products, tars, and other bituminous materials by the distillation method.

Dean & Stark Apparatus ASTM D95• Mantle heater with steel rod and clamp

• 500 ml flask

• Condenser

• Graduated 10 ml receiver type A

• Tapered joints 24/40

Accessories• Receiver type E 5 ml

• Receiver type E 10 ml

• Receiver type B without siphon 25 ml

• Receiver type C with siphon 25 ml

• Receiver type D with valve 25 ml

• Receiver type F 2 ml

Spare Parts• Flask 500 ml, tapered joint 24/40, pack of 3

• Liebig condenser 400 mm, tapered joint 24/40, pack of 3

• Receiver type A with siphon 10 ml, tapered joint 24/40



• Receiver type B without siphon 25 ml

• Receiver type C with siphon 25 ml

• Receiver type D with valve 25 ml

• Receiver type F 2 ml


TAN / TBN Analysis

Titra-Max Titration SystemMicro TAN Titrator Total Acid Number AnalyzerPAT940 Smart TitratorE-chem Combined pH/Conductivity Meter

Titra-Max Titration System

Features and Benefits• User friendly auto titration system.• User selectable End Point mode.• Compliant to ASTM methods for TAN/TBN analysis of oil samples. Mercaptan sulphur titration method as standard.• Interchangeable burette assemblies with intelligent volume recognition system.• Vortex mixing system for vigorous and homogeneous stirring of viscous samples.• Alphanumeric entry of all method parameters and sample data that ensures GLP compliance.• Pre-programmed ASTM methods for easy operation.• Two tier password protection, Administrator and User for method editing.• User selectable report formats – Titration analysis reports, method parameters, Data table, Titration curves, etc..• Full reprocessing and statistical analysis of run data including first and second derivative graphical report.• Balance interface for weight data transfer.• Data download to PC.

The Titramax Volumetric Titration system is designed specifically for the determination of TAN, TBN and Mercaptan Sulphur analysis of petroleum products, lubricants and transformer insulating oils.

Applications• Lubricating Oil

• Aviation Fuel

• Fuels & Waxes

Industries• Inspection

• Aviation

• Automotive


• Transportation

• Marine

• Refinery


• Military

• Petroleum

• Fuels & Waxes

Conforms to ASTM D664, D2896, D4739 & D3227


Micro TAN Titrator Total Acid Number Analyzer

Features• Very easy to use - intuitive keypad and function guide display

• 3 editable pre-programmed TAN methods

• Results expressed in mg KOH/g

• 10ml high precision syringe – syringe volume dispensed in 40,000 steps.

• External RJI22(4-4) bidirectional connection port to printer, balance or PC with RS232C

• Data Logger – automatic data storage of last 55 analysis results

• MicroTAN employs automatic MET determination

• Supplied with an optimized small volume titration vessel and a 250ml capacity vessel for those applications that require larger solvent volumes. The micro combination electrode is suitable for use with either size of titration vessel

The Micro TAN total acid number titrator has been designed to offer maximum specifications and features whilst being priced at a very competitive level. This titrator conforms to ASTM D664 for determination of acidic constituents in petroleum products, lubricants and transformer insulating oils.


Applications• Lubricating Oil

Industries• Inspection

• Aviation

• Automotive


• Military

• Transportation

• Marine


PAT940 Smart Titrator

Features• Light touch screen interface, with personalised menu for quick access to favorites

• Light touch with swipe, reduce and enlargement functionality

• Pre-programmed international testing methods

• (MET)Monotonic Equivalence Point, (DET) Dynamic Equivalence Point, (SET) titration to a preset end point and (MAT) manual titration modes

• Save results to intranet or LIMS Save and print data without PC, via Bluetooth or USB interface for printer

• Generate PDF reports, save to USB stick or intranet

• Real time curve can be viewed & enlarged at any point during the titration.

Pre-programmed testing methodsAcid Number ASTM D664 ASTM D974Base Number ASTM D2896 ASTM D4739Mercaptan S ASTM D3227H2S ASTM D2420H2S, mercaptan S UOP 163H2S, mercaptan S UOP 212carbonyl sulphideSaponification num. ASTM D94Bromine Number ASTM D1159 ASTM D5776 ISO 3839Salinity in Crude Oil ASTM D6470Organic Chlorine in ASTM D4929Crude Oil


PAT940 Smart Titrator

Features• Light touch screen interface, with personalised menu for quick access to favorites

• Light touch with swipe, reduce and enlargement functionality

• Pre-programmed international testing methods

• (MET)Monotonic Equivalence Point, (DET) Dynamic Equivalence Point, (SET) titration to a preset end point and (MAT) manual titration modes

• Save results to intranet or LIMS Save and print data without PC, via Bluetooth or USB interface for printer

• Generate PDF reports, save to USB stick or intranet

• Real time curve can be viewed & enlarged at any point during the titration.

Pre-programmed testing methodsAcid Number ASTM D664 ASTM D974Base Number ASTM D2896 ASTM D4739Mercaptan S ASTM D3227H2S ASTM D2420H2S, mercaptan S UOP 163H2S, mercaptan S UOP 212carbonyl sulphideSaponification num. ASTM D94Bromine Number ASTM D1159 ASTM D5776 ISO 3839Salinity in Crude Oil ASTM D6470Organic Chlorine in ASTM D4929Crude Oil

E-chem Combined pH / Conductivity Meter

Features and Benefits• High precision 3 decimal place combination pH & conductivity meter

• Complete with combination electrode suitable for measurement of low ionic strength solutions.

• User selectable choice of pH buffer calibration sets

• Ability to measure high purity water, suitable for applications in electric power and petrochemical industries.

• Built-in function of high purity water non-linear temperature compensation

Application• Soil• Sea Water• Food• Cosmetic• Pharmaceutical• Aquaculture• Tropical Fish Aquariums• Hydroponic gardening and farming• Waste water• Power and electrical industry• Swimming Pools• Printing Industry• Winery / Brewery

Range E512 E515 E522pH -2000 to 19.999 pH

----

mV ±1999.9 mV

----

0 to 2000 mS/cm,1 to 20.0 μS/cm20.0 to 200.0 μS/cm200 to 2000 μS/cm2.00 to 20.00 mS/cm20.00 to 200.0 mS/cm200 to 2000 mS/cm(with K=10 probe)

----

0 to 100 MΩ·cm ----

TDS 0 to 100 g/L ----

Salinity0 to 100 ppt ----

Temperature-10 to 110°C

AccuracypH ±0.002 pH ----

mV ±0.03% full scale ----

±0.5% full scale ----

Temperature ±0.4°C


Analyzers for Cold Properties

Cloud & Pour Point Analyzer

Cloud & Pour Point Units

Cold Filter Plugging Point (CFPP) Analyzer

Freeze Point Analyzer

Cloud & Pour PointAnalyzer

Features• Bench top model dry bath model analyzer• 4 dry test holes with thermometer hole and 4 stand by covers• Working temperature from ambient down to -70°C• Digital temperature controllers with 0,1°C resolution• Class A High Sensitivity PT 100 probes• CFC free gases

Ready to use unit complete with the following accessories• Four of each : ASTM graduated glassware test jar, cork cover, for centering thermometer, cork disk for test jar, insulating gasket,

• Four Thermometers ( For cloud point testing )

• Four Thermometers ( For pour point testing )

Cold Filter Plugging Point (Option)Cold Filter Plugging Point of diesel and heating fuels. Determination of the cold filter plugging point (CFPP)Temperature of diesel and domestic heating fuels by measuring the temperature at which the

sample ceases to flow through a wire mesh filter.

CFPP Accessory31 x 125 mm test tube with a set of neoprene gasket, 3 hole with Teflon cap, 20 ml Pyrex pipette , wire filter equipped with filtering disc 325 M, u-shaped glass pressure gauge, 3-way cock junction glass, junction glass tubes, cap bottle, vacuum pump, digital stopwatch, thermometer ASTM 5C IP, thermometer ASTM 6C IP 2C 1C

More than 20 Models are available within different ranges and applications depend on customer request

ASTM D97, D2500, D5853

DIN 51 428, 51 597

IP 15, 219, 309

ISO 3015, 3016


Cloud & Pour Point UnitsCloud and Pour Point Refrigerator 3 temperatures - Dry Bath• Floor Model• Light an resistant structure made in die-casted aluminum covered by special plastic material• Fitted with four wheels allowing movement• PVC cover with 12 wells (4 for each temperature) for accommodate 12 graduated jars• Equipped with 3 holes for thermometer accommodation• 12 small stand-by covers• Working temperatures: 0, -17 and -33 °C• Temperature is controlled by 3 digital thermo regulators (one for each temperature) fitted with a probe PT100 A• Automatic defrosting device low voltage• CFC free refrigerant gases are used

Cloud and Pour Point Refrigerator - 4 temperatures - Liquid Bath• Floor Model• Light an resistant structure made in die-casted aluminum covered by special plastic material• Fitted with four wheels allowing movement• PVC cover with 16 wells (4 for each temperature) for accommodate 16 graduated jars• Equipped with 4 holes for thermometer accommodation • Equipped with 4 holes where liquid is poured and thermometer is placed • 16 small stand-by covers• Working temperatures: 0, -18, -33 and -51 °C• Temperature is controlled by 4 digital thermo regulators (one for each temperature) fitted with a probe PT100 A• Automatic defrosting device low voltage• CFC free refrigerant gases are use

Cloud and Pour Point Refrigerator - 5 temperatures - Dry Bath• Floor Model• Structure made in light and resistant anodized aluminum with cover in PVC and 4 wheels for an easy transfer• 20 dry-clean wells in aluminum block (4 for each temperature) with holes for the thermometers• 20 small stand-by covers• Working temperature: 0, -18, -33 , -51, -69°C• 5 temperature digital controllers resolution 0,1°• 5 PT 100 probes class A• 5 main switches• CFC free gases

Available in floor & bench top models


ASTM D6371, D4539

EN 116

IP 309, 419

Cold Filter Plugging Point (CFPP) Analyzer

SubjectCold Filter Plugging Point of diesel, biodiesel and heating fuels.

Measuring CFPP PrincipleThe sample is cooled down according to the methods and when the preselected temperature is reached a vacuum of 20 mBar is automatically applied to the sample. The product is sucked through the filter into the calibrated aspiration pipette. If the sample takes more than 60 seconds to reach the upper barrier detector (during the aspiration phase), or it fails to return completely into the test jar before that the product has cooled by a further 1°C, the Cold Filter Plugging Point is reached.

Measuring CFPP Devices• Aspiration pipette

• Filter assembly

• Light barrier

Measuring Parameters• Temperatures: in °C

• Measuring range: +80°C … -80°C

• Resolution: 0.06 °C

• Accuracy: ± 0.1 °C

• Repeatability / Reproducibility: as per standards methods or better

Software FeaturesThe LabLink software is Windows based and is able to manage up to 10 analytical heads simultaneously

• User friendly interface

• All analytical parameters recoded

• Customizable analysis parameters and methods

• Customizable results report

• Printable graphs and results

• Self-identification of the typology of the analysers connected

The software includes:• Analysis Menu

• Diagnostic Menu

• Calibration Menu

• Data Utilities


ASTM D1177, D1655, D2386,

D5901, D5972

IP 16, 435, 528, 529

ISO 3013

Freeze Point Analyzer

SubjectFreezing Point of aviation fuels,aviation gasoline, aviation turbine fuels,engine coolants, antifreeze products,brake fluids,…

Measuring Freezing Point PrincipleAccording to the methods, the sample is cooled down and stirred. The solid hydrocarbon crystals formation are detected by means of a light beam reflected thanks to a mirror. As soon as crystals are detected, the sample is warmed up until their complete disappearance.

Measuring Freezing Point DevicesLight pulsed emission on I.R spectrum - through a coaxial fibber opticCoaxial fibber optic equipped with a mirror

Measuring Temperature ProbePlatinum resistance PT100 class A StirrerA micro-motor drives all the mechanical system

Measuring Parameters• Temperatures: in °C

• Measuring range: +80°C … -100°C

• Resolution: 0.06 °C

• Accuracy: ± 0.1 °C

• Repeatability / reproducibility as per standards methods or better

Software FeaturesThe LabLink software is Windows®based and is able to manage up to 10 analytical heads simultaneously

• User friendly interface

• All analytical parameters recorded

• Customizable analysis parameters and methods

• Customizable results report

• Printable graphs and results

• Self-identification of the typology of the analysers connected

The software includes:• Analysis Menu

• Diagnostic Menu

• Calibration Menu

• Data Utilities


Oxidation, Corrosion & Rust Testing

Heated Tube Baths for Oxidation Stability TestingDry Baths & Liquid Baths for Oxidation Stability of OilsChilled Water Bath for Oxidation Stability of Insulating OilsCorrosiveness and Oxidation Stability of Highly Refined OilsUniversal Oxidation Baths for Oxidation and Thermal StabilityOxidation Stability of Fuels & Insulation OilsCopper, Silver & Lead Corrosion by Petroleum ProductsRusting Characteristics of OilsRust Testing in Humidity Cabinet

Heated Tube Baths for Oxidation Stability Testing

Dry Baths for Oxidation Stability of Oils

Model: HT-342-4

Model: HT-342-12

• Available for Any Oxidation or Heat Stability Test• Heated Tubes Replace Aluminum Block and Oil Baths• Each Position Individually Temperature Controlled• Eliminates the Non-uniformity of Aluminum Blocks• Eliminates Smoke and Fire Hazards of Oil Baths• Light Weight vs Conventional Aluminum Blocks• Rapid Heat Up and Cooldown• Operating Temperature of 50° to 300°C• Sample Temperature Stability of ± 0.1°C• Oxygen or Air Flow Controller for Each Test Position• Controllers May be Interfaced to a Windows Based PC• Any Number of Positions from 1 to 100

The oxidation stability tube heating baths concept is similar to a heated aluminum block except that individual aluminum sleeves are used. Each sleeve is of a dimension to snugly fit a test tube of the specific test method requirements.

• Individual Heated Tube Bath Conforming to ASTM D943

• Also for methods: ASTM D2274, D2893, D4310, D4636 IP 388 ISO 4263 DIN 51 587 NF M07-047, T60-150 AOCS CD 12-57

• Temperature Range 50° to 300°C

• Temperature Stability of ±0.1°C

• Aluminum Block Bath Conforming to ASTM D943

A wide range of heated baths for the oxidation of oil products by ASTM D943, D2274, D2893, D4310, and D4636 test methods. In addition to the conventional heated liquid baths offers solid aluminum block baths and the heated tube baths.

Oxidation, Corrosion &Rust Testing


Liquid Baths for Oxidation Stability of Oils• Liquid Baths Conforming to ASTM D943

• Also for methods: ASTM D2274, D2893, D4310, D6594 IP 388 ISO 4263 DIN 51 587 NF M07-047, T60-150 AOCS CD 12-57


• Temperature Range of 40° to 150°C

• Flowmeters with Precision Control Valve

Chilled Water Baths for Oxidation Stability of Insulting Oils• Also for methods: ASTM D943, D2274, D4310, D4336, D4871, D6594 IP 388 ISO 4263 FTM 791-5307, 5308, 5321 DIN 51 587 NF M07-047, T60-150

• Recirculates Chilled Water to the Condensers

• Conserves Water

• Intended for High Volume Oxidation Testing

Model: 501-8

Model: 65

Model: 419-6

A wide range of heated liquid baths for the oxidation of oil products conforming to a wide range of oxidation test methods.

Laboratories with high volume of oxidation stability testing samples use large quantities of tap water to cool the reflux condensers. A more environmentally acceptable solution is to recirculate the cooling water such that the water exiting the last condenser is kept below 32°C. In addition, depending on location, tap water temperature may not be acceptable.

Corrosiveness & Oxidation Stability of Highly Refined Oils• Individual Heated Tube Bath Conforming to ASTM D4636

• Aluminum Block Bath Conforming to ASTM D4636

• Also for methods: ASTM D5968, D6594 FTM 791-5307, 5308 IHC BT-10



A wide range of heated baths for the oxidation of oil products by ASTM D4636, D5968, and D6594 methods.


Universal Oxidation Baths for Oxidation & Thermal Stability• Aluminum Block Bath Conforming to ASTM D4871• Individual Heated Tube Bath Conforming to ASTM D4871• Temperature Range 50° to 400°C• Temperature Stability of ±0.5°C

Oxidation Stability of Fuels• Methods: ASTM D525, D873, D5304, IP 40, 138, ISO 7536 FTM 791-3352, 3354, DIN 51 780• Liquid Bath with Capacity for 6 Oxidation Bombs• Solid Aluminum Block Bath with Capacity for 4 Bombs• Temperature Range 40° to 150°C• Temperature Stability of ±0.1°C

Oxidation Stability of Insulation Oils• Conforms to ASTM D2440 Method• Temperature Stability of ±0.2°C• Temperature Range of 40° to 150°C• Flowmeters with Precision Control Valve

Model: 66-12

Model 66-6 is a bench top model with a solid aluminum block bath with 6 test positions conforming to ASTM D4871 test method. The single digital controller provides sample temperature control of ±0.5°C. Temperature range is from 50° to 400°C.Each position has a float in tube flowmeter with a precision control valve for delivering gas to the test specimen at a rate of from 1.5 to 13 L/hr. Please specify the gases to be used and their intended flow rates. Gas pressure regulator is provided to adjust the inlet gas pressure to the flowmeters. An over temperature control circuit is provided to prevent over temperature conditions in the event of primary controller failure.

Model 188 is a liquid bath conforming to ASTM D525, D873, D5304 and related test method for the oxidation stability of gasoline (Induction period method) and aviation fuels (Potential residue method). Model 188 has a capacity for 6 oxidation bombs. The temperature range is 40° to +150°C with temperature stability of ±0.1°C provided by a digital indicating controller with 0.1°C resolution. Mechanical agitation of the liquid bath is provided to insure temperature uniformity within the bath. The bath has a volume capacity of approximately 160 liters. The unit is protected against overheating in the event of primary controller failure.Model 144 is a circular solid aluminum block accepting 4 oxidation bombs. Operating temperature range is 40° to +200°C. A digital indicating controller with 0.1°C resolution provides temperature stability and position to position uniformity of ±0.1°C.

Model 505-8 is an oil bath with 8 test positions accepting ASTM D2440 test tubes and with 8 float in tube flowmeters and precision control valve delivering oxygen at 1 ±0.1 L/hr. It operates at 110°C with ±0.2°C stability. The heavily insulated stainless steel bath is agitated by an electrical motor for temperature uniformity. An over temperature cut off circuit is provided in the event of primary controller failure.Model 505-4 is similar to Model 505-8 but with only 4 test positions.

Model: 144

Model: 505-8


Copper Corrosion by Petroleum Products• Methods: ASTM D130, D4814 IP 154 ISO 2160 FTM 791-5325 DIN 51 759 NF M07-015

• Solid Block Constant Temperature Baths

• Liquid Constant Temperature Baths

• Baths for Tube or Test Bomb


• Temperature Stability of ±0.2 °C

A wide range of constant temperature test baths conforming to ASTM D130 copper corrosion test for fuel and related test methods.Liquid baths are offered with capacity for 4, 8, or 12 test bombs held in a vertical position. The same baths may also be used (with a change of support rack) for test tube only procedure accommodating 8, 16, or 24 test tubes.Model 279-4 is a stainless steel liquid bath able to accept 4 test bombs for either D130 test method. By exchanging the support rack it is able to accept 8 test tubes from D130 when the test bomb is not employed.The temperature range of Model 279-4 is 40° to +180°C with temperature stability of ±0.2°C. Temperature is controlled with a digital display controller with 0.1°C resolution. To prevent over heating in the event of primary controller failure, a high limit switch is provided to interrupt power to the bath. A float switch interrupts power to the bath in the event of low bath fluid level.The bath is mechanically agitated to insure test point to test point uniformity. A cover over the bath is provided to reduce evaporation (if water is used as a bath medium).Model 279-8 and Model 279-12 are identical to Model 279- 4 except are larger and able to accept 8 and 12 test bombs, respectively, or 16 and 24 test tubes, respectively.Models 279-4, 279-8, and 279-12 are also suitable for the proposed new silver corrosion test method that will soon be part of ASTM D4814 gasoline specification.Model 280-8 and Model 280-12 are solid aluminum block baths with 8 and 12 test tube positions, respectively, for ASTM D130 where the use of the test tube alone is specified without the test bomb. The operating temperature range is 300oC to 1800oC. The dry block bath removes the disadvantages of liquid baths, such as smoke, fire hazard, cleanliness, safety, etc.Accessories for ASTM D130, such as test bombs, polishing vice, copper of silver test strips, ASTM color standard, etc. are available conforming to the test method.

Model: 280-8


Silver Corrosion by Petroleum Products• Methods: ASTM D4814 IP 227





Model: 295-6

Recent developments have accelerated the ASTM development of a silver corrosion test by fuels. The new ASTM method will soon be made part of ASTM D4814 and is, in large measure, based on D130 test bomb method.Model 279-4 is an insulated stainless steel liquid bath able to accept 4 test bombs holding the test fuel and the silver strip. The temperature range of Model 279-4 is 30° to 180°C with temperature stability of ±0.2°C. Temperature is controlled with a digital display controller with 0.1°C resolution. To prevent overheating, a high limit switch is provided to interrupt power to the bath in the event of primary controller failure. A float switch interrupts power to the bath in the event of low bath fluid level.The bath is mechanically agitated to insure test point to test point uniformity. A cover over the bath is provided to reduce evaporation (if water is used as a bath medium).Model 279-8 and Model 279-12 are identical to Model 279- 4 except are larger and able to accept 8 and 12 test bombs, respectively.Model 279-4, 279-8 and 279-12 are also suitable for ASTM D130 method when pressure vessels are used.Model 291-6 is an insulated stainless steel liquid bath deep enough to be able to accept 6 test tubes conforming to IP 227 silver corrosion test method. The temperature range of Model 291-6 is 30° to 180°C with temperature stability of ±0.2°C. Temperature is controlled with a digital display controller with 0.1°C resolution. To prevent overheating, a high limit switch is provided to interrupt power to the bath in the event of primary controller failure. A float switch interrupts power to the bath in the event of low bath fluid level.Model 295-6 with similar features as Model 291-6 but is a solid aluminum block bath deep enough to accept 6 test tubes (350 mm long) as per IP 227. The dry block bath removes the disadvantages of liquid baths, such as smoke, fire hazard, cleanliness, safety, etc.


Silver Corrosion by Petroleum Products• Methods: ASTM D4814 IP 227





Model: 295-6

Recent developments have accelerated the ASTM development of a silver corrosion test by fuels. The new ASTM method will soon be made part of ASTM D4814 and is, in large measure, based on D130 test bomb method.Model 279-4 is an insulated stainless steel liquid bath able to accept 4 test bombs holding the test fuel and the silver strip. The temperature range of Model 279-4 is 30° to 180°C with temperature stability of ±0.2°C. Temperature is controlled with a digital display controller with 0.1°C resolution. To prevent overheating, a high limit switch is provided to interrupt power to the bath in the event of primary controller failure. A float switch interrupts power to the bath in the event of low bath fluid level.The bath is mechanically agitated to insure test point to test point uniformity. A cover over the bath is provided to reduce evaporation (if water is used as a bath medium).Model 279-8 and Model 279-12 are identical to Model 279- 4 except are larger and able to accept 8 and 12 test bombs, respectively.Model 279-4, 279-8 and 279-12 are also suitable for ASTM D130 method when pressure vessels are used.Model 291-6 is an insulated stainless steel liquid bath deep enough to be able to accept 6 test tubes conforming to IP 227 silver corrosion test method. The temperature range of Model 291-6 is 30° to 180°C with temperature stability of ±0.2°C. Temperature is controlled with a digital display controller with 0.1°C resolution. To prevent overheating, a high limit switch is provided to interrupt power to the bath in the event of primary controller failure. A float switch interrupts power to the bath in the event of low bath fluid level.Model 295-6 with similar features as Model 291-6 but is a solid aluminum block bath deep enough to accept 6 test tubes (350 mm long) as per IP 227. The dry block bath removes the disadvantages of liquid baths, such as smoke, fire hazard, cleanliness, safety, etc.

Model: 416-3

Lead Corrosion by Petroleum Products• Meets the Requirements of FTM 791-5321• Automated Stirrer Timing• Automated Raising and Lowering of Stirrers• Temperature Range 40° to 200°C• Temperature Stability of ±0.1 °C

Rusting Characteristics of Oils• Methods: ASTM D665, D3603, IP 135, ISO 7120, FTM 791-4011, 791-5315 DIN 51 355, 51 585, NF T60-151• Liquid Bath or Dry Block Bath with 4 or 6 Test Positions• Temperature Range 40° to 150°C• Temperature Stability of ±0.1°C

Model: 390-4

Model 416-3 is a 3 position fully insulated stainless steel oil bath with an operating range from 40 to 200oC. Temperature control is provided by digital indicating controller providing stability of ±0.10oC. Built in support rack holds the test tube to the proper immersion level. Each position is equipped with a stirrer at 600 +/- 50 rpm for rotating the copper and lead specimens in the test oil.For improved operator efficiency, Model 416-3 is semi automated. After the test tube with the test oil is placed in the bath, there is a 30 minutes wait as specified by the method. At this point, the stirrers are automatically lowered into the samples, and automatically start rotating at the correct speed. The air flow also starts at the same time. After 60 minutes of operation, the stirrers are automatically stopped, raised from the oil, the air flow is stopped and an alarm sounds. The remaining time to the next event is digitally displayed as well as the stirrer speed. Both the stirrer speed and event timer are adjustable, if so desired.Each test position has a ball-in-tube flow meter with precision valves providing 2 cubic feet per hour air flow. The flow meters are mounted on the front of the cabinet for easy of adjustment. As an option, mass flow controllers are available providing precise air flow independent of air temperature or pressure. To prevent over heating in case of primary controller failure a redundant temperature controller disconnects power to the heaters. A low bath liquid level detector also disconnects power to the heaters.Model 416-6 is identical to Model 416-3 but with 6 test positions.Model 416-M is similar to Model 416-6 with 6 test positions but without the automated feature of raising, lowering, starting and stopping of the stirrers and air flow. Model 393-6 is a six position aluminum block bath, similar to Model 416-3 but without the automation features. The aluminum block bath offers improved safety over a liquid bath.

Model 390-6 is a 6 test positions agitated liquid bath conforming to ASTM D665, D3603, and other similar tests. A two position bath cover is provided that adjusts for either ASTM D665 or D3603 test methods. The bath’s temperature is maintained by a microprocessor based PID controller with set point and bath temperature display. A secondary high temperature limit switch prevents over heating in the event of primary controller failure. In addition, a float switch is provided that interrupts power to the heaters in the event of low bath liquid level. A clear plastic safety guard is available as an option on the front of the apparatus protecting the operator from the rotating stirrer shafts.

Model: 393-6


Foam Testing

Heated Air Baths for Foam TestingLiquid Baths for Foam TestingDiffuser Certification Apparatus for Foam Testing of Lubricating OilsFoaming Tendency of Engine CoolantsAutomated Apparatus for Cleaning Foam Testing Cylinders

Foam Testing

Model: 323

Heated Air Baths for Foam Testing• Meet the requirements of ASTM D6082 150°C foaming test

• Meet the requirements of ASTM D892 for foaming characteristics

• Operating temperatures from +20° to +150°C

• Digital indicating PID temperature controller, ±0.5°C stability

• Rapid sample heat up

• Refrigerated option for rapid sample cool down

• Eliminates liquid bath medium for improved safety and cleanliness

• Two channel mass flow control of air flow

• Automatic test event sequencer

Model 323 is a four test position heated AIR bath for measuring the foaming tendencies of lubricating oils in the temperature range of +20° to +150°C. The use of heated air for heating test samples improves the overall safety by eliminating the use of the potentially unsafe, smoking, dripping of flammable, hot liquid bath medium. Conventional bath fluids darken and require frequent replacement. Use of silicone oils (strong defoamers) is not recommended due to possible contaminationModel 323 uses a digital indicating (0.1°C resolution) PID controller for controlling the air temperature in the chamber, with a stability of better than ±0.5°C over the operating range. Novel, sophisticated heating system and control allows the sample to reach test temperature in less than the 60 minutes as specified by the ASTM D6082 method. Long temperature probes are provided for each of the 4 test positions for digital display and precise control of sample temp.For improved consistency of results, two digital indicating mass air flow controllers are used for precisely measuring and controlling the amount and rate of air delivered to the air diffuser. The air flow is controlled at either a rate of

94 (for ASTM D892) or 200 ±5 mL/min. (for ASTM D6082).

An automated, two channel sequencer automatically starts the air flow after the 5 minutes diffuser soak time, after 5 minutes stops the air flow and sounds an alarm, and again sounds an alarm after the 10 minutes settling period.A touch screen allows the operator selection and full adjustment of all test parameters. All key test parameters are displayed during the test. Also displayed is the time remaining to the next test event requiring operator attention. A multi pane insulated window allows full view of the test cylinder for observation of the foam.An assembly with a pair of fans is available as an option to accelerate cooling of the air bath to the next lower test temperature. A chilled water/glycol mixture is required to maintain 24°C in the air chamber for ASTM D892 Sequence I and III testing. The chilled mixture is also helpful for rapid cool down of the air chamber for the next test.


Liquid Baths for Foam Testing• Conforms to ASTM D892 and D6082 Test Methods

• Also for Methods: IP 146 DIN 51 566 NF T60-129 FTM 791-3213

• Temperature Stability Better than ±0.5°C

• Semi Automated Sequencer Model Available

Model 24 dual foam test bath is the traditional arrangement with two glass jars mounted on a supporting base. Each jar accepts two, 1 liter test cylinders for ASTM D892 testing. One bath is typically controlled at 24°C (external cooling required) and the other at 93.5°C. Digital display temperature controllers provide stability of better than ±0.5°C. Four, float in glass tube flowmeters are provided with micro valves for precision adjustment of air to flow at 94 mL/min ±5 mL/min. The jar for 93.5°C has a clear plastic protective sleeve to protect the operator from touching the hot surface. A coil is available as an option for the 24°C bath for recirculating chilled water to help maintain the bath temperature. An optional flow through refrigerated chiller is available to maintain the 24°C bath temperature.Model 28 is similar to Model 24 but upgraded for semi automated operation by the addition of Model FM-20. For improved consistency of results, two digital indicating mass air flow controllers are used for precisely measuring and controlling the amount and rate of air delivered to the air diffuser. The air flow is controlled at either a rate of 94 (for ASTM D892) or 200 +/-5 mL/min. (for ASTM D6082). Sixteen inch long temperature probes are provided for each of the 4 test positions for digital display of sample temperature.The automated, two channel sequencer automatically starts the air flow after the 5 minutes diffuser soak time, after 5 minutes stops the air flow and sounds an alarm, and again sounds an alarm after the 10 minutes settling period. A touch screen allows the operator selection and full adjustment of all test parameters. All key test parameters are displayed during the test. Also displayed is the time remaining to the next test event requiring operator attention.Model 12 single position test bath is same as Model 24 but only a single test jar and only two ball in tube flow meters. Model 296 high temperature foam test liquid bath is a safer way to perform ASTM D892 as well as D6082 test methods. The glass jar holding the heated liquid bath medium is enclosed in an insulated cabinet with a multipane insulated viewing window. The jar enclosure, in part, protects the operator by limiting the hot bath fluid splash in the event of jar breakage.The illuminated jar holds two, 1 liter test cylinders. The air flow is measured by two, ball in glass tube flow meters (one for each test position) and adjustable by micro precision valves to a flow rate from 90 to 200 ±5 mL/min. The bath temperature control is provided by a digital indicating PID controller with 0.1°C resolution. The temperature stability is better than ±0.5°C over the operating range of 40° to 160°C.A support rack for 4 test tubes is available as an option for convenient storage of the large cylinders.

Test Tube Support Rack

Model: 24

Model: 28


Model: FM-19PC

Diffuser Certification Apparatus for Foam Testing of Lubricating Oils• Certify Diffusers Used in ASTM D892 and D6082• Also for Methods: ASTM D721, D1881, D3235, D6811, E128 IP 146, DIN 51 566, NF T60-129, FTM 791-3213• Fully Automated and Manual Apparatus• Determine Permeability and Maximum Pore Diameter

The measurement of Foaming Characteristics of Lubricating Oils as per ASTM D892, and ASTM D6082 High Temperature Foam Testing, is dependent upon the quality of the gas diffuser stone used in the test. Certification of the air diffuser involves the determination of critical parameters including PORE DIAMETER and PERMEABILITY for either spherical ceramic (Norton) or cylindrical metal (Mott) diffusers.ASTM D892 method recommends that the diffusers be tested when new and periodically thereafter, preferably after each use. It is, however, strongly recommended that the retesting of the diffuser be done every 10 tests since plugging occurs after use even with diligent cleaning.Model FM-19PC Digital Diffuser Certification Apparatus automatically determines both diffuser PORE DIAMETER and PERMEABILITY in accordance with ASTM D892 and D6082. The traditional manometer and wet test meter are replaced by a high precision digital pressure controller and a digital mass flow meter, respectively, both controlled by a PC. The pressure ramping is electronically controlled and the first bubble is automatically detected.The proprietary Windows software manages the testing operation, the required calculations, and all the data. The results are displayed on the screen and can be printed and/or stored on the PC hard drive for ISO 9000 traceability. Model FM-18PC is similar to Model FM-19PC, above, but requires visual observation for the appearance of the first bubble.Model FM-18D is a non-automated apparatus, also conforming to ASTM D892 and D6082 for measurement of pore diameter. It consists of a certified (NIST traceable) U-tube manometer capable of reading 1000 mm of water installed on a wall mountable panel.Mounted on the same panel is the apparatus for the determination of permeability which consists of a digital indicating mass flow meter capable of measuring 6000 mL/min. air flow while generating a low back pressure. Model FM-18D eliminates the need for the clumsy and difficult to use wet test meter.

Foaming Tendency of Engine Coolants• Conforms to ASTM D1881

• Operates at 88°C with ±0.5°C Stability

Model 98-1 and Model 98-2 (one and two test positions, respectively) meet the requirements ASTM D1881 Foaming Tendency of Engine Coolants test method. The 12 inch diameter borosilicate glass jar is temperature controlled at 88OC with a stability and uniformity of ± 0.5OC. The temperature controller has an over temperature protection in the event of primary controller failure. A ball in tube flow meter with a precision control valve is provided for each test position. The air flow rate is controlled at 1000 ± 25 mL/min.

Model: 98-2


Automated Apparatus for Cleaning Foam Testing Cylinders• Meets The Requirements of ASTM D892 and D6082

• Also for Methods: IP 146 DIN 51 566 NF T60-129 FTM 791-3213

• Cleans 4 Foam Test Cylinders Simultaneously

• Each Solvent Flushing Time is Operator Adjustable

• Improved Safety with Minimum Operator Contact with Solvents

• Reduced Risk of Injury by Broken Glass

• Significant Time Savings to the Operator

Model 406 is specifically designed for automated cleaning of up to 4 foam testing cylinders simultaneously. The cleaning process fully conforms to ASTM D892 and D6082 using the specified solvents and drying procedure. The automation of the foam test cylinder cleaning chore releases the operator to more productive activity.The automated cleaning apparatus enclosed in a front opening cabinet consists of a holder for 4 foam test tubes that are inverted on it (after draining of the test oil). A powerful, air driven pump sends a pulsating spray of solvents in the sequence as specified by the test methods (i.e., heptane, detergent water, distilled water, acetone, and finally drying air). The solvent spray impinges on the bottom of the test tube and then flows along the sides of the tubes for a total cleaning.To conserve solvents a small amount of clean solvent is introduced into the cylinder and recirculated for an adjustable period of time. This is followed by a clean solvent rinse, and then proceeding to the next cleaning process.The operation is controlled by an on-board Windows based PC and can be accessed by the operator via a touch panel screen. He/she can select (and store in memory) the times of each step of the sequence. This option gives the operator the flexibility to adjust the flow of each cleaning step to balance time and material use vs. satisfactory cleaning. The valves controlling the flow of materials are operated by non-sparking, low voltage solenoid valves. All the electronics and all electrical components are in a separate, nitrogen purged compartment. Although precautions have been taken to reduce the fire hazard of this apparatus, Model 406 is not explosion nor fire proof.The solvents are contained within the test tube and plumbing. This closed system keeps the operator from exposure to the solvents.Each test position has a manual shutoff valve, thus allowing the cleaning of less than 4 tubes at a time.

Model: 406


Refractometers

J457 Automatic RefractometerThe Temperature Corrected J47 Automatic RefractometerJ57HA Automatic RefractometerJ157 Automatic RefractometerJ257 Automatic RefractometerJ357 Automatic Refractometer

J457 Automatic Refractometers

Smart Measure™ TechnologyImproves Results!All J457’s come with Smart Measure™ Technology that automatically detects when the prism is improperly cleaned, insufficient sample is loaded, or if the instrument is improperly calibrated.

Exclusive Dual TemperatureControl SystemAll J457 models come with exclusive Dual Temperature Control System utilizing Peltier Technology. The J457 heats and cools the sample from both prism surface and the sample cover. The insulating cover housing seals against the Prism Well Ring to create a uniform temperature environment providing unmatched temperature control uniformity.

SC Standard ConfigurationJ457-SC Standard Configuration is most popular configuration and provides an excellent combination of a small footprint and large, easy-to-navigate touchscreen interface.

WC Wall Mount ConfigurationJ457-WC Wall Mount Configuration is designed for production environments where water is used for cleaning or thereis a lot of sample spillage on the work

surface. This configuration is also excellent for situations where there is very little work space available: out on the factory floor or in an over crowded satellite laboratory where there is little to no remaining bench space.

FC Factory ConfigurationJ457-FC Factory Configuration is recommended when there is a lot of sample spillage on the laboratory’s instrumentation. Factories working with sticky resins and syrups that end up being spilled on the instrumentation are great candidates for the J457-FC as the measurement unit can be as much as six feet away from the display unit.


The Temperature Corrected J47 Automatic Refractometer• Very fast measurement

• Simple to load, simple to measure, simple to clean

• Result independent of operator 26.7°C judgment

ApplicationThe J47 was designed to meet the unique needs of a food and beverage testingwhere the samples are mostly a mixture of sugar and water and the refractometer is viewed more as a tool than a laboratory instrument. The J47’ssingle flat measurement surface, temperature correction and one button measurement capability make it perfect for heavy use applications.

J57HA Automatic Refractometer ApplicationThe J57HA was designed to meet the unique needs of food quality testing where the refractometer is viewed as a Quality Control tool rather than a laboratory instrument. A single flat measurement surface, electronic temperature control and one button measurement capability make it perfect for heavy use applications.

J157 Automatic Refractometer ApplicationThe J157 is designed as a high accuracy refractometer for food and water based chemical applications. The instrument can read to ±0.00004 RI / ±0.03 BRIX making it more accurate and reproducible than 4 decimal place wide range chemical refractometers.

J257 Automatic Refractometers ApplicationThe J257 is designed as a multi purpose refractometer useful for a broad range of refractive index applications. The wide refractive index range of 1.26-1.70 means that this instrument can measure many materials that a refractometer with a food refractive index range of 1.33 – 1.53 cannot.

J357Automatic Refractometers ApplicationDesigned as a research quality instrument the J357 has the highest performance of any refractometer in the range. This instrument offers the same extra wide range as our chemical industry models combined with the high accuracy of our food industry models. It also offers the most powerful temperature control and is able to measure at up to 120°C

J57WR Automatic Refractometer ApplicationThe J57WR was designed to meet the unique needs of industrial environments in the chemical industry where the refractometer is viewed as a QC tool rather than a laboratory instrument. A single flat measurement surface, electronic temperature control and one button measurement capability make it perfect for heavy use applications.

J57AB & J157AB Automatic Refractometer ApplicationThe J57AB and J157AB are the Petroleum specific Refractometers in the Rudolph Research Refractometer Product Line. The Rudolph Research J57AB and J157AM refractometers have temperature control and WU measurement features needed for testing required in the petroleum industry.

J457 Automatic Refractometers

Smart Measure™ TechnologyImproves Results!All J457’s come with Smart Measure™ Technology that automatically detects when the prism is improperly cleaned, insufficient sample is loaded, or if the instrument is improperly calibrated.

Exclusive Dual TemperatureControl SystemAll J457 models come with exclusive Dual Temperature Control System utilizing Peltier Technology. The J457 heats and cools the sample from both prism surface and the sample cover. The insulating cover housing seals against the Prism Well Ring to create a uniform temperature environment providing unmatched temperature control uniformity.

SC Standard ConfigurationJ457-SC Standard Configuration is most popular configuration and provides an excellent combination of a small footprint and large, easy-to-navigate touchscreen interface.

WC Wall Mount ConfigurationJ457-WC Wall Mount Configuration is designed for production environments where water is used for cleaning or thereis a lot of sample spillage on the work

surface. This configuration is also excellent for situations where there is very little work space available: out on the factory floor or in an over crowded satellite laboratory where there is little to no remaining bench space.

FC Factory ConfigurationJ457-FC Factory Configuration is recommended when there is a lot of sample spillage on the laboratory’s instrumentation. Factories working with sticky resins and syrups that end up being spilled on the instrumentation are great candidates for the J457-FC as the measurement unit can be as much as six feet away from the display unit.

The Temperature Corrected J47 Automatic Refractometer• Very fast measurement

• Simple to load, simple to measure, simple to clean

• Result independent of operator 26.7°C judgment

ApplicationThe J47 was designed to meet the unique needs of a food and beverage testingwhere the samples are mostly a mixture of sugar and water and the refractometer is viewed more as a tool than a laboratory instrument. The J47’ssingle flat measurement surface, temperature correction and one button measurement capability make it perfect for heavy use applications.

J57HA Automatic Refractometer ApplicationThe J57HA was designed to meet the unique needs of food quality testing where the refractometer is viewed as a Quality Control tool rather than a laboratory instrument. A single flat measurement surface, electronic temperature control and one button measurement capability make it perfect for heavy use applications.

J157 Automatic Refractometer ApplicationThe J157 is designed as a high accuracy refractometer for food and water based chemical applications. The instrument can read to ±0.00004 RI / ±0.03 BRIX making it more accurate and reproducible than 4 decimal place wide range chemical refractometers.

J257 Automatic Refractometers ApplicationThe J257 is designed as a multi purpose refractometer useful for a broad range of refractive index applications. The wide refractive index range of 1.26-1.70 means that this instrument can measure many materials that a refractometer with a food refractive index range of 1.33 – 1.53 cannot.

J357Automatic Refractometers ApplicationDesigned as a research quality instrument the J357 has the highest performance of any refractometer in the range. This instrument offers the same extra wide range as our chemical industry models combined with the high accuracy of our food industry models. It also offers the most powerful temperature control and is able to measure at up to 120°C

J57WR Automatic Refractometer ApplicationThe J57WR was designed to meet the unique needs of industrial environments in the chemical industry where the refractometer is viewed as a QC tool rather than a laboratory instrument. A single flat measurement surface, electronic temperature control and one button measurement capability make it perfect for heavy use applications.

J57AB & J157AB Automatic Refractometer ApplicationThe J57AB and J157AB are the Petroleum specific Refractometers in the Rudolph Research Refractometer Product Line. The Rudolph Research J57AB and J157AM refractometers have temperature control and WU measurement features needed for testing required in the petroleum industry.


Asphalt Analyzers

ASA Automated Stability AnalyzerThermoelectric Bending-Beam RhoemeterPORLA Asphalt AnalyzerAsphalt Oxidizing Reactor

Determines the P-value and

the Po/Frmax of residual

fuel oils per ASTM D7060

Complies with Shell Methods

SMS 1600 & SMS 2715

ASA Automated Stability Analyzer

Features• Determines the P-value and the Po/Frmax of residual fuel oils per ASTM D7060

• For Process Monitoring of Residual Refinery Streams and Fuel Oils

• Determines the P-Value and the Po/Frmax of Residual Fuel Oils

• Complies with Shell Methods SMS 1600 and SMS 2715

• Uses Modern Fiber Optics Techniques for Improved Detection

The ASA Automated Stability Analyzer is the ideal tool for for process monitoring of residual refinery streams and fuel oils: It automates the procedure for quantifying maximum flocculation ratio of asphaltenes in the oil and the peptizing power of the oil medium according to ASTM D7060. The ASA complies with Shell Methods SMS 1600 and SMS 2715.

BenefitsThe ASA Automated Stability Analyzer uses the latest fiber optic techniques to greatly improve detection of the flocculation point and repeatability of the results.

Because the unit is automatic, no manpower needed and repeatability improved. Windows-based software performs all calculations. Data from previous runs may be easily accessed and processed using the supplied Data view software.

Applications• Residual Fuel

• Fuels

Industries• Refinery


• Petroleum

• Fuels & Waxes

• Inspection

• Process


Meets or Exceeds ASTM D6648,

AASHTO T313 & SHRP

Provisions for Flexural Creep

Testing of Asphalt Binders

Thermoelectric Bending-Beam Rhoemeter

Features• Meets or Exceeds ASTM D6648, AASHTO T313, and SHRP

• Provisions for Flexural Creep Testing of Asphalt Binders

• Precise, Repeatable Data

• Environmentally-Friendly Thermoelectric Cooling (No External Refrigeration or Refrigerants Required)

• Graphical Software for Windows®

• Cooling to –36° Celsius in most Laboratory Environments

Thermoelectric Bending-Beam Rheometer performs low-temperature flexural creep stiffness measurements on asphalt binders as specified in current ASTM D6648, AASHTO and SHRP methodology.

Applications• Bitumen

Industries • Asphalt/Bitumen,

• Refinery,

• Petroleum

New Crack Seal Option!The TE-BBR controls air pressure with four pneumatic pressure regulators, permitting the operator to adjust main input line pressure, air bearing pressure, and pressure supporting the loading shaft for a “zero” condition and a “load” condition.A magnetic stirring bar at the bottom of the bath vessel circulates bath fluid to ensure uniform temperature distribution throughout the bath. The speed of the stirring bar rotation is adjustable.


ASTM D7112 is the test method

for PORLA.

PORLA Asphalt Analyzer

One of the main reasons for this interest has been the high price of crude oil. Using PORLA allows oil companies and refineries to prepare feedstock crude oil blends more economically. The PORLA Fully Automatic Stability and Compatibility Analyser can measure oils with an asphaltene content as low as 0.05%, which is a twentieth of competitive instruments. D7112 is the ASTM test method for the PORLA

Benefits of PORLA• No need to filter samples to remove coke particles and other contaminants

• No Need For Experienced Operators

• High Automation Level - Proven Technology

• Low Labor Requirements

• Easy To Use And Maintain

• Less Time Consuming versus Manual Reference Method

• 1/6 of Manual Method Time

• Increased precision compared to manual and other methods – Better Reproducibility and Repeatability

Features• Automatic, Simple and Easy Operation• Asphaltene Sensitive Detector• Heavy and Crude Oil Compatibility Application• Can Analyze Low Asphaltene Content Oils (<0.1%)• One Variable and Three Fixed Dilution Ranges• Fast Screening Option• Measurement Mode for Light Samples• Aromatic Solvent Evaporation Correction• Operation at Elevated Temperatures• Detector uses reflected light, sensitive to asphaltene particles• Desk-top laboratory analyser• Sample preparation time of 5 minutes• 3 sample titration typically takes 90 minutes• Very quick to clean detector (1 min.)• Analysis performed at slightly elevated temperatures to reduce reaction time• Results stored on PC hard drive, possible to print hard copy• Weight :35 kg / Dimensions (40 x 53.5 x 40cm)


Model: 90

Features• Asphalt Oxidation for Roofing Materials

• Small Compact Size

• Operating Range to 300°C

• Motor Driven Agitator

• Efficient Air Sparger

Asphalt Oxidizing Reactor

Model 90 asphalt oxidizing reactor is designed expressly for the study of oxida-tion of asphalt at elevated temperatures for the manufacture of roofing materials.Model 90 is an all stainless steel, approxi-mately 4 inch internal diameter by approxi-mately 18 inch tall, electrically heated reactor with a mixer, an efficient air sparger for maximum gas dispersion, and a bottom drain.The reactor cover has provisions for venting the off-gases and for reactor loading. The sparger, thermocouple and mixer are removable from the reactor cover to facilitate cleaning. The bottom drain has a special ball valve trapping a minimum volume of reactants, allowing the full reactor charge to be efficiently mixed. The reactants are agitated by twin turbine mixers operated by a controllable variable speed motor. The electrically

heated and insulated stainless reactor may be lifted from the stand for easier cleaning.The reactants' temperature is controlled by a digital indicating, PID temperature controller. The operating temperature is up to 300°C. A temperature limit control is provided, preventing over heating. The airflow is controlled by a precision needle valve and measured by a rotary flowmeter capable of from 0 to 10 liters per minute of air. An air pressure regulator is also provided.


Other Petroleum Products

Water-Oil Separability (Demulsability) Testing ApparatusTest Baths for Specific Gravity, API Gravity of Petroluem ProductsFlourescent Indicator Adsorption(FIA Method)Lubricity of Aviation Turbine Fuels BOCLE 5001Vapour-Liquid-Equilibrium ApparatusRamsbottom Carbon Residue Test Apparatus

A color touch panel, which is friendlier than single line displays, is used to display temperature and RPM plus control the unit. Plus it also has built in timers for each position to avoid the need for stopwatches. When agitation is stopped an audible alarm is sounded to alert the user.The stirrer speed RPM is measured by a tachometer and digitally displayed.

Features• Full Visibility Bath with the Range of 40° to 95°C• Digital Display Temperature Controller for ±0.2°C Stability• Capacity for 7 Graduated Test Tubes• Adjustable Stirrer Operating at 1500 rpm ±1 rpm configurable to 2500 rpm• Configurable stirrer shutdown time and 7 sample timers up to 59.99 min• Audible alarm for stirrer shutdown• Sample turntable with fixed motor position, avoids alignment problems• High visibility: 3 viewing sides and backlit• Enclosed cabinet with removable jar for tighter temperature control & improved operator safety• Viewing sides are special scratch resistant plastic

Model: 305

Water-Oil Separability(Demulsability) Testing Apparatus

The stirrer motor is securely fixed with only a vertical range of motion without the use of belts or chains. Apparatus design permits lifting for paddle and sample removal. Time is saved in alignment for the next test and future mechanical problems are avoided by keeping the motor fixed and use of a sample turntable that locks in place at each position.The stirrer paddle and shaft is machined from a single piece of stainless steel. This paddle reduces the possible micro crevices which may accumulate contamination. These contaminants are difficult to remove in paddles of conventional soldered shaft and paddle construction.The enclosed cabinet design gives the unit a stable footprint less prone to topple over and safer in high temperature applications than open jar designs. The bath jar is easily removable from the rear. Additional safeguards include low level, over temperature, and circuit breaker protection. The bath cover reduces water loss and has the capacity for 7 graduated test cylinders. The unit is backlit for easier reading of the emulsion separation line.

Meets The Requirements of ASTM D1401

ISO 6614

FTM 791-3201

DIN 51 599

NF T60-125


Model: 177-4D Model: 28-1

Model 28-1 is a single position "heated tube" design that does not require a glass hydrometer cylinder to put the test sample in. The metal tube is filled to the top with the sample where it is brought to the desired test temperature. The hydrometer is placed into the tube to determine the API or specific gravity. An overflow catch collar collects the excess sample to waste. After completion of the test a drain valve is opened and the sample is discarded to a waste container or sink.Models 28-2 and 28-6 are similar to Model 28-1 but with two and six test positions, respectively.

Features• Conforms to ASTM D287, D1298, D3142, D6822

• Models available from 1-12 test positions

• Operating temperature up to 100°C

• Temperature stability ±0.1°C

• Unique, fixed stainless steel cylinder tube in baths

• Unique individually heated tube baths

Test Baths for Specific Gravity,API Gravity of Petroleum Products

Model 177-12 accepts twelve 2 inches diameter by 16 inch long hydrometer cylinders for measurement of API or specific gravity at temperatures from ambient to +100°C. It has an agitated liquid bath and adjustable overflow pipe to maintain the correct bath level when the hydrometer cylinders are immersed. The 17 inch deep stainless steel, insulated bath is electronically heated and its temperature control is provided by digital indicating temp. controller with resolution to 0.1°C providing temp. stability or better than ±0.1°C.The cabinet dimensions are 31"x 6"x 21". Shipping weight is 200 lbs/27 cu.ft.Model 177-6 is similar to Model 177-12 but a smaller bath to accept 6 test tubes.Model 177-4D is a 12 inch diameter by 18 inch borosilicate glass jar with support to hold vertically 4 test cylinders. Temperature control is provided by a digital display adjustable controller. The agitated bath is also protected by high temperature limit switch as well as a low bath liquid level switch.


D3142 & D6822

ISO 3675

IP 160

DIN 51 757


Model: FIA 1319-4

Features• Available in two, four or six test positions

• Large easy to read gauges

• Adjustable scales

• Portable vibrator supplied for tighter silica gel packing

FIA-1319 is a series of apparatus used for determination of saturated, non-aromatic olefins, and aromatics in petroleum fractions that distill below 315°C by Fluorescent Indicator Adsorption (FIA Method). This apparatus conforms to ASTM D1319 and other similar test methods. It is available in 6, 4, and 2 position versions. We supply a portable handheld vibrator, purchased separately. It is unlike competitive units that offer fixed mounted vibrator. Benefit is the ability to focus the vibration to specific areas of the column to more tightly pack the silica gel.Model FIA-1319-6 consists of• Wall mounting panel with universal brackets and mounting fixtures for 6 FIA columns• 6 easy to read pressure gauges• Pressure manifold with precision needle valve for each position

Flourescent Indicator Adsorption(FIA Method)

• Zone measuring device• Spherical joint/hose connector for each position• Complete standard adsorption column for each position• Portable UV lamp

Model FIA-1319-4 is identical to Model FIA-1319-6 but has 4 test positions.Model FIA-1319-2 is identical to Model FIA-1319-4 but has 2 test positions.The test method permits the use of two types of adsorption columns .Precision bore columns, our part number FIA-11, can be reused after cleaning. Requires purchase of one cleaning capillary FIA-14. Adsorption columns with standard bore, our FIA-16, offer the convenience of being disposable after each use. Order additional replacement columns, our FIA-17. In addition to the FIA-1319 apparatus, also needed are a portable vibrator, standard silica gel, dyed silica gel, and appropriate number of spare precision bore or standard columns. Columns are very long, fragile, and costly to ship, so consider ordering larger quantities of spares to amortize the shipping costs.

Conforms to ASTM D1319 Test Method

ISO 13757

IP 156

NF M07-024


Test Equipment for Measurement of Aviation Turbine Fuels Lubricity by the Ball-on-Cylinder Lubricity Evaluator according to ASTM D5001.BOCLE 5001 according to ASTM D5001 measures the actual wear scar size with a Test Ball specimen. The wear scar is generated by the friction between the stationary ball and a rotating cylinder. A part of the rotating cylinder is immersed in the turbine fuel tank (50 ml) and covered with the turbine fuel.The temperature of the fuel tank is controlled, as well as the relative humidity


Lubricity of Aviation Turbine Fuels BOCLE 5001

of the air which is circulated into and above the test fluid – the air flow rate is controlled, too. The Test Ball is loaded by a preselected load for the test period 30 min. After the test the minor & major axis of the resultant wear scar measured with a microscope. Two measurements have to be performed for getting an averaged result, the more lubricity a Turbine Fuel has the lower is the resultant wear scar.


Fluid Volume 50 ± 1.0 ml

Fluid Temperature 25 ± 1°C

10 ± 0.2% RH at 25 ± 1°C

Flow Rate Through The Fluid 0.5 L/min.

Flow Rate Over The Fluid 3.3 L/min.

Pre-Treatment Time 15 min.

Applied Load 1000 g

240 ± 1 rpm

30 ± 0.1 min


ApplicationDetermination vapor-liquid-equilibrium for calculation of required separation efficiency.

The vapor-liquid phase equilibrium of mixtures with two or more components are an essential basis for determining the theoretical number of separation stages and other distillation conditions. A special advantage of the apparatus is that in case of mixtures with miscibility gaps, a direct gaseous sampling of the vapor phase is possible by means of another sampling port. The model VLE 100 D is designed for operation under overpressure


Vapor-Liquid-EquilibriumApparatus

condition; the necessary fittings, probes and safety devices for this purpose are integrated in the cased basic frame. A version for working under vacuum conditions is also available. Micro processor controlled regulation unit for precise and reliable work and can be upgraded for operations under reduced pressure as well. A heating mantle and tape for operation at higher temperatures is also available.

180° C

Measurement approx. 100 ml

3000 - 1.0 mbar




Ramsbottom Carbon Residue Test Apparatus

ASTM D524, D6074

IP 14, ISO 4262

FTM 791-5002

NF T60-117

Type Of Furnace Electrically heated block furnace.

Max Operating Temp. Programmable up to 650 oC

Continuous Operating Temp. 550 oC +/- 5oC

Capacity 5 samples simultaneously

Heater Ceramic shealted split bend heater

Temperature Controller Temperature is controlled by microprocessor based PID temp. controller with dual display to monitor and switch on/off the heater.

Input Power Supply 230 VAC, 50 Hz

Thermocouple Calibrated thermocouple, capable of measuring up to 1000 oC at accuracy of +/- 1oC

Control Panel/ Display Digital display for present & set temperatures, heater indicator and main switch on/off indicator.

Safety Interlocks/ Relay Safety cut-off and emergency switch off for power overload.

Structure Double walled structure, thermally insulated for better performance during continuous operation. Powder coated external surface for and esthetic appearance.

Electrical Requirement • 220-240V, 50/60Hz, Single Phase

• Or 115V, 50/60Hz, Single Phase

Accessories Supplied with Equipment• 10 Sample Bulbs

• Syringe

• Tongs


Mobile Fuel & Oil Laboratory

Mobile Fuel & Oil Laboratory

Mobile Fuel & Oil Laboratories

Mobile Fuel & Oil Laboratories

Mobile Fuel & Oil Labs are ideal solution for fast and precise fuel & oil quality checks in the field. Equipped with the portable, rugged and fully automated analyzers, a detailed fuel & oil analysis can be performed in less than 30 minutes by a single person directly on-site.,Mobile Labs have the flexibility to be built and equipped according to individual requirements: the type of vehicle can be chosen, air-condition, ventilation system, auxiliary heating, sink with fresh and/or distilled water, vessel dryer, anti-skid flooring, fire extinguishers and certainly a large selection of on-board fuel & oil

testing analyzers (various brands are available) can be installed to comply with your individual needs.

All instruments are securely mounted on specially designed shock absorbers to avoid damage during driving. Specially designed lab desks and lockers provide optimal work space and storage of samples and chemicals. The on board electric transformer supplies power to the instruments and devices from 2 sources: chargeable 12V batteries and external and internal 240V. Containers for waste and fresh/distillate water supply are easily accessible through the back doors.

Features• Fuel resistant workbench

• Drawers with lock

• Chair for convenient working

• Air conditioning & Heating system

• Desk for PC

• Fire extinguisher

• Integrated wash basin

• Compartment lightning

• Van fit for rough roads- shock proof installation of instruments- water and power supply- connection to printer and PC


Application• Terminals, retail outlets and tank farms are scattered over a wide area

• Adulteration and cross contamination c an happen everywhere

• Compliance testing has to be done “on the spot”

• Transportation to a lab is too time consuming

• Fast and cost effective results needed

Complete Solution• Gasoline analyzer

• Diesel analyzer

• Flashpoint tester

• Vapor pressure tester

• Viscometer

• XRF Sulfur determination

• Distillation

• Elemental Analysis

• Particle Count

• Cold Properties

• Physical & Chemical Properties

• …and more according to your needs


On-Site Environmental Oil & Fuel Testing

InfraCal 2 Oil in Water TestingPCB and Chlorinated Organics TestingUsed Oil TestingSoil Testing: Petroleum Hydrocarbons & WaterCondition Monitoring Of Industrial OilsAlternative Fuels Testing

Complies with

ASTM D7066 Standard

Correlates with

EPA 1664 Method

InfraCal 2 Oil in Water Testing

ApplicationsOil in Water / Soil Testing• Oil Level in Produced Water

• FOG in Wastewater

• Sub-ppm Oil in Water

• TPH in Soil Remediation

• Oil Content in Frac Water

• Hydrocarbons in Drill Cuttings

• Oil in Water in the Petrochemical Industry

Biofuels Measurements• Biodiesel in Diesel Fuel

• Ethanol in Gasoline

• Biodiesel QC Production

Specific Applications• Metal Parts Cleaning

Features• Higher signal to noise for increased sensitivity/performance

• Touch screen intuitive display

• Holds multiple calibrations

• Internal data logging and data transfer capabilities

• Alarm functions

• Security features to protect calibrations & instrument settings

• Optional internal battery pack

• Complies with ASTM D7066 (Model Trans-SP) 0.1 ppm

• Correlates with EPA 1664 Method (Model ATR-SP) 0.3 ppm

Password Login Feature Calibration Table


PCB & Chlorinated Organics TestingClor-N-OilField Test Kits for PCB Screening of Electrical Insulating Fluid - 20, 50, 500 ppm Action LevelU.S. EPA SW-846 Method 9079

Analytes:

Matrix:

Detection Method:

Action Levels:

Analysis Time:

Packaging:

PCB's

Transformer Oil

Fixed endpoint colorimetric titration

Above or Below 20, 50, 500 ppm

Less than five minutes

20 Kits to a shelf pack, 80 kits per case. Minimum order 10 kits. Orders greater than 10 kits must be in multiples of 20.

Clor-N-SoilField Test Kit for PCB Screening of Soil at 50 ppm

Analytes:

Matrix:

Detection Method:

Action Levels:

Analysis Time:

Packaging:

PCB's

Soil


50 ppm

10 minutes


L2000®DX PCB / Chloride AnalyzerField Testing: Quantitative PCB/Chlorinated Organics Testing for Dielectric Fluid, Soil, Water, and Surface SamplesU.S. EPA SW-846 Method 9078 for Soil

Analytes:

Matrix:

Detection Method:

Action Levels:

Analysis Time:

Packaging:

PCB's, Chlorinated Organics

Water, Transformer Oil, Surface Wipes, Soil

Electrochemical

Soil: 2-2000ppm

Water: 10ppb-2000ppm

Wipe: 2-2000ug/100cm

Oil - 5 min, Soil, Wipes and Water 10 min.

Ships as single unit


Clor-D-Tect Q4000Field test kit for quantifying total chlorine (halogens) in used oilU.S. EPA SW-846 Method 9077ASTM Method D5384Analytes:

Matrix:

Detection Method:

Action Levels:

MDL:

MQL:

Interferences:

Overall Accuracy:

Analysis Time:

Packaging:

Chlorine, Chlorinated Organics

Used Oil, Solvents, Organic Liquids

Quantitative colorimetric titration

200 - 4000 ppm

200 ppm

600 ppm

Sulfur may cause false positive results

10% +/- MDL

5 minutes


Analytes:

Matrix:

Detection Method:

Action Levels:

Analysis Time:

Packaging:

HydroCLOR-QField Test kit for Organic Chlorine Determination for Oil/Water Mixtures and Used Antifreeze/Coolant

Chlorinated Organics

Water/Oil Mix, Antifreeze


200-4000 ppm

Less than 10 minutes

Sold in packs of 12

Clor-D-Tect 1000Field screening test for total (halogens) chlorine in used oil.U.S. EPA SW-846 Method 9077ASTM Method D5384

Analytes:

Matrix:

Detection Method:

Action Levels:

Interferences:

Analysis Time:

Packaging:




Above or below the 1000 ppm regulatory limit

Sulfur may cause false positive results

Less than 5 minutes


Used Oil Testing


HydroSCOUT Analyzer System Percent Range for Used OilField Test for Quantifying Water In Used Oil - Percent RangeU.S. EPA SW-846 Draft Method 9001

Analytes:Matrix:

Detection Method:Action Levels:

MDL:MQL:Interferences:Overall Accuracy:Analysis Time:Packaging:

WaterUsed Oil, Solvents, Organic Liquids, Lubricating Oils, Industrial Oils, GasolineQuantitative calcium Hydride reactionHigh range: 1500 ppm - 100%, Low Range: 50ppm to 10,000ppm0.15 %v/v and 5 %v/v0.45 %v/v and 15 %v/vEthylene Glycol / Acids10% +/- MDL3 minutesShips as single unit

Analytes:

Matrix:

Action Levels:

MDL:

MQL:

Interferences:

Overall Accuracy:

Analysis Time:

Packaging:



50 - 6000 ppm chloride with a precision of +/- 5%

50ppm

150ppm

Sulfur

10% +/- MDL

5 Minutes

Boxes of ten

TitraCLOR - CLaboratory Test for Quantifying Chlorine in Used Oil (colorimetric end point)

Analytes:

Matrix:

Action Levels:

Analysis Time:

Packaging:



50 - 6000 ppm chloride with a precision of +/- 5%

5 minutes

Boxes of 10

TitraCLOR - PQuantitative (Laboratory) Test for Chlorine in Used Oil - (potentiometric end point)


Analytes:Matrix:Detection Method:Action Levels:MDL:MQL:Interferences:Overall Accuracy:Analysis Time:

Petroleum HydrocarbonsSoilTurbidimetric Development150 ppm (MDL) to 20,000 ppm150 ppm450 ppmNatural Hydrocarbons10% +/- MDLThroughput 1-10 samples in 15 minutes

PetroFLAG HIGH RANGE EXTRACT Field Test Kit Reagents for High Range Analysis of Total Petroleum Hydrocarbon (TPH) in Soil

PetroFLAG REAGENTS TPH Field Test Reagents for PetroFLAG Soil AnalyzerAnalytes:Matrix:Detection Method:Action Levels:MDL:MQL:Interferences:Overall Accuracy:Analysis Time:

Petroleum HydrocarbonsSoilTurbidimetric Development15 ppm - 2000 ppm (analyte dependent)15 ppm45 ppmNatural Hydrocarbons10% +/- MDLThroughput 1-10 samples in 15 minutes

PetroFLAG TPH ANALYZER System Field Test Kit for Total Petroleum Hydrocarbons in SoilU.S. EPA SW-846 Method 9074Analytes:Matrix:Detection Method:Action Levels:MDL:MQL:Interferences:Overall Accuracy:Analysis Time:

Soil Testing: Petroleum Hydrocarbons & Water

Petroleum HydrocarbonsSoilTurbidimetric Development(MDL) 15 -2000 ppm (analyte dependent)15 ppm45 ppmNatural Hydrocarbons10% +/-MDLThroughput 1-10 samples in 15 minutes

Analytes:Matrix:Detection Method:Action Levels:MDL:Analysis Time.

WaterSoilQuantitative calcium hydride reaction0.25% (w/w) - 50% (w/w)0.25% (w/w)Under 10 minutes

HydroSCOUT ANALYZER System for SOIL Field Test for Quantification Of Water In Soil. On-Site Test Kit for Quantifying Moisture Content of Soil U.S. EPA SW-846 Draft Method 9001


Condition Monitoring of Industrial OilsTitraLube TANField Test Kit for Quantifying Total Acid Number in Industrial/Lubricating Oils.

Analytes:

Matrix:

Detection Method:

Action Levels:

MDL:

MQL:

Overall Accuracy:

Analysis Time:

Packaging:

Total Acid Number (TAN)

Lubricating Oils, Industrial Oils, BioDiesel


0-2 TAN Units (mg KOH/gm oil)*

0.18 TAN Units

0.50 TAN Units

10% +/- MDL

5 minutes

Packs of 20 tests

TitraLube TBNField Test Kits for Quantifying Total Base Number, (TBN), in Lubricating Oil in Diesel Engines. ASTM Method D5984-96

Analytes:

Matrix:

Detection Method:

Action Levels:

MDL:

MQL:

Overall Accuracy:

Analysis Time:

Packaging:

Total Base Number (TBN)

Lubricating Oils, Industrial Oils


0- 20 TBN Units (mg KOH/gm oil)*

0.6 TBN Units

1.8 TBN Units

10% +/- MDL

5 minutes

Packs of 20 tests

Analytes:

Matrix:

Detection Method:

Action Levels:

MDL:

MQL:

Interferences:

Overall Accuracy:

Analysis Time:

Packaging:

Water

Lubricating Oils, Industrial Oils, BioDiesel

Quantitative calcium Hydride reaction

50 - 10,000 ug/mL

50 ug/mL

150 ug/mL

Ethylene Glycol / Acids

10% +/- MDL

Less than ten minutes

Ships as single unit

HydroSCOUT Analyzer System Percent Range for Lubricating OilsField Test for Quantifying Water In Used Oil - Percent RangeU.S. EPA SW-846 Draft Method 9001


Alternative Fuels TestingHydroSCOUT Analyzer System PPM Range for Lubricating Oils Analyzer system for quantifying moisture content of industrial oils - ppm range.

Analytes:Matrix:Detection Method:Action Levels:MDL:MQL:Interferences:Overall Accuracy:Analysis Time:Packaging:

WaterLubricating Oils, Industrial Oils, BioDieselQuantitative calcium Hydride reaction50 - 10,000 ug/mL50 ug/mL150 ug/mLEthylene Glycol / Acids10% +/- MDLLess than ten minutesShips as single unit

Analytes:

Matrix:

Packaging:

Water

Solvents, Organic Liquids, Lubricating Oils, Industrial Oils

Boxes of 40

HydroSCOUT Reagents PPM Range for Lubricating OilsField Test Reagents for quantifying water in industrial/lubricating oils - ppm range

TitraLube TANField Test Kit for Quantifying Total Acid Number in Industrial/Lubricating Oils.

Analytes:Matrix:Detection Method:Action Levels:MDL:MQL:Overall Accuracy:Analysis Time:Packaging:

Total Acid Number (TAN)Lubricating Oils, Industrial Oils, BioDieselQuantitative colorimetric titration0-2 TAN Units (mg KOH/gm oil)*0.18 TAN Units0.50 TAN Units10% +/- MDL5 minutesPacks of 20 tests

Analytes:

Matrix:

Detection Method:

Action Levels:

Analysis Time:

Packaging:

Ethanol, Alcohol

Gasoline

Miscibility

0 to 90%

Less than 2 minutes

Boxes of 20 tests

Quant-N-OLField Test Kit for Quantifying Ethanol in gasoline.


Index by Test Methods



Standards PageD56 102, 103, 104D86 68, 69, 70, 87, 88, 90D91 128D92 105D93 102, 103, 104D94 134D95 129D96 128D97 138E123 70E128 154D130 147D156 122E203 127D287 169E308 122E313 122D323 89, 90, 96, 97, 99

D44530, 31, 32, 33, 34, 35, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 54

D509 122D524 173D525 146D613 87, 88, 89, 90, 92D664 114, 132, 133, 134D665 149D721 154D789 37D848 122D873 146D850 70D890 127D892 152, 153, 154, 155D893 128D943 144, 145D974 134

Standards PageD976 92D1078 68, 69, 70D1123 127D1159 134D1160 74D1177 141D1209 122D1243 37D1250 118D1267 96D1290 128D1298 169D1319 170D1348 127D1364 127D1401 168D1500 122D1533 126D1544 122D1568 127D1655 34, 141D1795 37D1796 128D1881 154D1925 122D1966 128D2196 54D2270 39D2273 128D2274 144, 145D2386 141E2412 18D2420 134D2440 146D2500 138D2532 34D2622 111

Standards PageD2699 86, 88, 89, 90D2700 86, 88, 89, 90D2709 128D2711 128D2857 37D2879 97D2885 88D2892 72, 75, 76D2893 144, 145D2896 114, 132, 134D2983 60D3142 169D3227 114, 132, 134D3235 154D3401 127D3603 149D3828 102D3829 58, 59D4006 129D4007 128D4017 127D4045-81 115D4052 118D4084-07 115D4243 37D4287 54D4294 108D4310 144, 145D4336 145D4377 127D4468-85 115D4539 140D4603 37D4636 144, 145D4672 127D4684 58, 59D4683 53

ASTM American Society for Testing and Materials



Standards PageD4739 114, 132, 133D4741 53D4814 147, 148D4871 145, 146D4928 126D4929 134D4953 96, 97, 99D5001 171D5002 118D5186 92D5188 96, 97, 99D5191 89, 90, 96, 97, 99D5236 73, 74, 75D5293 51D5304 146D5386 122D5460 127D5481 52, 53D5482 96, 97D5530 127D5776 134D5845 89, 90, 91D5853 138D5901 141D5972 141D6045 122D6074 173D6082 152, 153, 154, 155D6166 122D6277 89, 90, 91D6304 126D6371 140D6377 96, 97, 99D6378 87, 88, 94, 95, 97D6450 103, 104D6470 134D6594 145

Standards PageD6595 7, 8, 9, 10D6648 163D6728 6, 9D6786 24D6811 154D6821 59D6822 169D6896 58, 59D6897 96, 97, 99D7060 162D7094 103, 104D7039 109, 110, 111D7066 180D7112 164D7226 55, 56, 57D7279 38, 40, 47, 49D7344 68D7536 13D7596 24D7777 89, 90 D7806 89, 90D7889 20

ISO International StandardizationStandards PageISO 307 37ISO 918 70ISO 1628 37ISO 2160 147ISO 2719 102, 103, 104ISO 3013 141ISO 3015 138ISO 3016 138ISO 3105 30, 34ISO 3104 30, 34, 40, 50, 87, 88ISO 3405 68, 89, 90ISO 3675 169

Standards PageISO 3839 134ISO 4262 173ISO 4263 144, 145ISO 4406 24ISO 5163 89, 90ISO 5164 89, 90ISO 5165 87, 89, 90ISO 6614 168ISO 7120 149ISO 7536 146ISO 8217 108ISO 8754 108ISO 9029 129ISO 9262 60ISO 10101-3 126ISO 10337 126ISO 12058 48ISO 12937 126ISO 13757 170ISO 13736 102, 104ISO 20847 108ISO 20884 109, 110, 111

DIN German StandardizationStandards PageDIN 6162 122DIN 51 355 149DIN 51 428 138DIN 51 566 151, 152, 153DIN 51 587 144, 145DIN 51 599 168DIN 51 757 169DIN 51 758 102DIN 51 759 147DIN 51 780 146 DIN 53 015 48



IP Institute of PetroleumStandards PageIP 15 138IP 16 141IP 34 102IP 40 146IP 71 34IP 74 129IP 75 128IP 123 68, 69, 70IP 135 149IP 146 153, 154, 155IP 154 147IP 160 169IP 170 102, 104IP 191 70IP 195 70IP 219 138IP 227 148IP 236 86IP 237 86IP 267 60IP 309 138, 140IP 336 108IP 358 129IP 359 128IP 370 52, 53IP 386 126IP 388 144, 145IP 394 96, 97, 99IP 409 94, 95, 97IP 419 140IP 435 141IP 438 126IP 481 96, 97IP 496 108IP 523 102IP 524 102IP 528 141IP 529 141

Miscellaneous StandardsStandards PageAASHTO T313 163ACEA 53

American Standard Methods 2120 E 122

AOCS CD 12-57 144, 145AOCS Dd 5-92 122AOCS Td 1a 122API MPMS Chapter 10.9 126BS2000 Parts 123, 191, 195 70BS 7392 70CP Appendix IX A 122CEC L-36-A-90 52, 53DEF STAN 91:91 34DGK F050.2 122EN 116 90EN 13016 90EN 13016-2+2 96, 97EN ISO 3405 70GOST 52340 96HAL and User Defined 24ICUMSA GS1-7 122ICUMSA GS2/3-9 122IHC BT-10 145JIS K2254 69JIS K2258-2 96, 97JIS K2265 102

JIS K2580 122

NAS 1638 24NAVAIR 01-1A-17 24SAE AS 4059 24

SAE J300 51, 52, 53

SCAN-CM 15:99 37SHT 0769 96, 97SMS 1600 162SMS 2715 162PAPTAC G.24P 37Ph. Eur. Method 2.2.2 122

AFNOR StandardsStandards PageNF M07-002 70NF M07-015 147NF M07-024 170NF M07-047 144, 145NF T60-117 173NF T60-125 168NF T60-129 153, 154, 155

NF T60-150 144, 145

NF T60-151 147

Federal Test MethodStandards PageFTM 791-3201 168FTM 791-3213 154, 155FTM 791-3352 146FTM 791-3354 146

FTM 791-5002 173FTM 791-5307 143FTM 791-5308 145FTM 791-5321 145FTM 791-5325 147

U.S. EPA StandardsStandards PageEPA 1664 180

EPA S-846 Draft Method 9001183184 185

EPA SW-846 Method 9074 184EPA SW-846 Method 9077 182EPA SW-846 Method 9078 181EPA SW-846 Method 9079 181

Standards PageTappi T230 37UOP 163 134UOP 212 134USP (631) Color and Achromicity 122

USP 911 37

Beyler Caddesi 1651. Sokak No: 8 Beytepe 06810 Ankara TurkeyTel : + 90 312 468 85 30 Fax: + 90 312 468 85 33www.biolab.com.tr [email protected]

biolab - mylabdanismanlik.commylabdanismanlik.com/453,biolab-genel-katalog-2014.pdfbiolab is built...

Documents