bs quick reference guide 2009-03-mar

BS 4062 ..............................................................25BS 5315 ..............................................................20BS 5341 ..............................................................25BS 5449 ..............................................................23BS 6148 ..............................................................25BS 6798 ..............................................................10BS 7275 ..............................................................25BS 7570 ........................................................14, 23DD CEN/TS 13388 ..............................................19BS EN 115 ..........................................................10BS EN 999 ..........................................................19BS EN 1088 ........................................................19BS EN 1093 ........................................................19BS EN 1526 ........................................................19BS EN 1550 ........................................................19BS EN 1612 ........................................................20BS EN 1886 ........................................................19BS EN 1914 ........................................................10BS EN ISO 4263 ..................................................26BS EN ISO 6149 ..................................................26BS EN ISO 7369 ..................................................26BS EN 9101 ........................................................11BS EN ISO 10407 ................................................11BS EN ISO 10417 ................................................27BS EN ISO 10424 ................................................27BS EN ISO 10426 ................................................27BS EN ISO 10427 ................................................27BS EN ISO 10432 ................................................27BS EN ISO 10447 ................................................27BS EN ISO 11961 ................................................11BS EN 12077 ......................................................19BS EN ISO 12156 ................................................27BS EN 12484 ......................................................27BS EN 12734 ......................................................27BS EN 12828 ................................................19, 23BS EN 12831 ................................................19, 23BS EN 13083 ......................................................11BS EN 13597 ......................................................21BS EN ISO 13625 ................................................27BS EN ISO 13631 ................................................27BS EN 13997 ......................................................27BS EN ISO 14172 ................................................12BS EN 14336 ................................................19, 23BS EN ISO 14373 ................................................27BS EN 15166 ......................................................12BS EN 15194 ......................................................12BS EN 15268 ......................................................12BS EN 15316 ......................................................12BS EN ISO 15465 ................................................28BS EN 15620 ......................................................12BS EN 15629 ......................................................12BS EN 15635 ......................................................12BS EN 15655 ......................................................12BS EN 15800 ......................................................14BS EN ISO 16432 ................................................28BS EN ISO 16433 ................................................28BS EN ISO 17078 ................................................28BS EN ISO 21329 ................................................28BS EN 29367 ......................................................28BS EN 50504 ................................................14, 23BS EN 60404 ......................................................20BS ISO 525 .........................................................29BS ISO 603 .........................................................29BS ISO 1085 .......................................................29BS ISO 1540 .......................................................29BS ISO 2697 .......................................................29BS ISO 2705 .......................................................29BS ISO 2943 .......................................................29BS ISO 3290 .................................................16, 17BS ISO 3366 .......................................................29BS ISO 3842 .......................................................29BS ISO 3888 .......................................................29

Electrotechnical

BS 581 ................................................................21BS 1659 ..............................................................21BS 1745 ..............................................................21BS 2011 ..............................................................14BS 3934 ..............................................................23BS 5225 ..............................................................23BS 8434 ..............................................................23BS 9300 .................................................21, 22, 23BS 9301 ..............................................................22BS 9305 ..............................................................22BS 9364 ..............................................................22BS 9400 ..............................................................23BS 9430 ..............................................................23BS 9490 ..............................................................23BS 9493 ..............................................................23BS EN 13032 ......................................................23BS EN 50085 ......................................................14BS EN 50106 ......................................................14BS EN 50200 ......................................................23BS EN 50216 ......................................................14BS EN 50408 ......................................................14BS EN 50492 ......................................................14BS EN 50521 ......................................................14BS EN 60068 ................................................14, 24BS EN 60079 ......................................................14BS EN 60335 ................................................20, 24BS EN 60384 ......................................................24BS EN 60512 ................................................14, 15BS EN 60519 ......................................................15BS EN 60598 ......................................................15BS EN 60704 ......................................................24BS EN 60730 ......................................................24BS EN 60793 ......................................................15BS EN 60794 ......................................................15BS EN 60851 ......................................................15BS EN 60904 ......................................................15BS EN 61000 ......................................................24BS EN 61058 ......................................................24BS EN 61162 ......................................................16BS EN 61400 ......................................................16BS EN 62227 ......................................................16BS EN 62288 ......................................................16BS EN 62305 ......................................................20BS EN 62491 ......................................................16BS EN 131800 ....................................................24BS ISO 23273 .....................................................32BS CECC 50000 ..................................................23BS CECC 90000 ..................................................23DD IEC/PAS 62137 ..............................................18DD IEC/PAS 62562 ..............................................18DD IEC/PAS 62587 ..............................................18DD IEC/TS 61850 ................................................18DD IEC/TS 62492 ................................................18DD IEC/TS 62538 ................................................18PD ES 59008 ................................................22, 23PD 7639 .......................................................17, 24PD CLC/TR 50378 ...............................................17PD IEC/TR 60909 ..........................................17, 24PD IEC/TR 62572 ................................................18BS E9372 ............................................................24BS E9375 ............................................................24

Engineering

BS 746 ................................................................19BS 949 ................................................................24BS 1127 ..............................................................24BS 1660 ..............................................................24BS 2452 ..............................................................21BS 3087 ..............................................................25BS 3628 ..............................................................23

The following British Standards are listed orreferred to in this issue of Update Standardswith the exception of those in ‘New WorkStarted’.

Building and civil engineeringBS 1924 ..............................................................21BS 5412 ..............................................................10BS 5628 ........................................................18, 19BS 5975 ..............................................................19BS 6912 ........................................................11, 24BS 8208 ..............................................................23BS 8515 ..............................................................10BS EN 200 ....................................................10, 19BS EN 817 ..........................................................19BS EN 1646 ........................................................10BS EN 1857 ........................................................20BS EN 1995 ........................................................20BS EN ISO 3449 ..................................................11BS EN ISO 3457 ..................................................11BS EN ISO 3471 ............................................11, 24BS EN ISO 6683 ..................................................11BS EN ISO 7096 ..................................................11BS EN 12273 ......................................................19BS EN 13510 ................................................11, 24BS EN 13696 ......................................................11BS EN 15436 ......................................................12BS EN 15644 ......................................................12DD ENV 13696 ...................................................11NA to BS EN 1993 ..............................................10NA to BS EN 1999 ..............................................10PD CEN/TR 15615 ...............................................17PD 6695 .............................................................17

Consumer products and servicesBS 684 ...................................................26, 27, 28BS 2472 ..............................................................11BS 6222 ........................................................10, 23BS 7142 ..............................................................11DD CEN/TS 15790 ..............................................18DD CEN ISO/TS 15530 ........................................18BS EN ISO 662 ....................................................26BS EN 1116 ........................................................21BS EN ISO 1736 ..................................................10BS EN ISO 1737 ..................................................10BS EN ISO 1854 ..................................................10BS EN ISO 2450 ..................................................11BS EN ISO 6885 ..................................................26BS EN ISO 7208 ..................................................11BS EN ISO 7328 ..................................................11BS EN ISO 8381 ..................................................11BS EN ISO 9936 ..................................................27BS EN ISO 12228 ................................................27BS EN 13721 ......................................................21BS EN 13722 ......................................................21BS EN 14073 ......................................................21BS EN 14375 ......................................................19BS EN 15288 ......................................................12BS EN 15507 ......................................................12BS EN 15633 ......................................................12BS EN 15634 ......................................................12BS EN ISO 15753 ................................................28BS EN ISO 15788 ................................................28BS EN ISO 24276 ................................................28BS EN 50136 ......................................................14BS ISO 3976 .......................................................29BS ISO 6886 .......................................................30BS ISO 9844 .......................................................30BS ISO 9874 .......................................................30BS ISO 10368 .....................................................30BS ISO 12078 .....................................................31BS ISO 18252 .....................................................32BS ISO 23275 .....................................................32PD ISO/TR 210 ....................................................28PD ISO/TR 211 ....................................................28

British Standards – Quick Reference Guide

4 Update Standards Mar 2009Prices may be subject to change.

BS EN ISO 7765 ..................................................27

BS EN ISO 10058 ..........................................11, 24

BS EN 10271 ......................................................21

BS EN ISO 10308 ................................................27

BS EN ISO 12086 ................................................27

BS EN 12175 ......................................................11

BS EN 14420 ......................................................27

BS EN 14422 ......................................................27

BS EN 14423 ......................................................28

BS EN 14424 ......................................................28

BS EN ISO 14631 ................................................28

BS EN ISO 14663 ................................................28

BS EN 15029 ......................................................12

BS EN 15031 ......................................................12

BS EN 15608 ......................................................12

BS EN 15702 ......................................................14

BS EN ISO 15702 ................................................23

BS EN 15704 ......................................................14

BS EN ISO 15882 ................................................14

BS EN 20105 ......................................................28

BS ISO 247 .........................................................28

BS ISO 363 ...................................................28, 29

BS ISO 368 .........................................................29

BS ISO 815 ...................................................16, 23

BS ISO 1126 .......................................................29

BS ISO 1304 .......................................................29

BS ISO 1409 .......................................................29

BS ISO 1434 .......................................................29

BS ISO 2028 .......................................................29

BS ISO 2475 .......................................................29

BS ISO 2561 .......................................................29

BS ISO 4195 .......................................................17

BS ISO 4658 .......................................................30

BS ISO 4660 .......................................................30

BS ISO 4926 .......................................................30

BS ISO 4928 .......................................................30

BS ISO 4930 .......................................................30

BS ISO 6101 .......................................................30

BS ISO 6118 .......................................................30

BS ISO 6446 .......................................................30

BS ISO 8118 .......................................................30

BS ISO 8312 .......................................................30

BS ISO 8332 .......................................................30

BS ISO 9028 .......................................................30

BS ISO 9128 .......................................................30

BS ISO 11235 .....................................................31

BS ISO 13990 .....................................................31

BS ISO 14531 .....................................................31

BS ISO 15585 .....................................................31

BS ISO 15971 .....................................................17

BS ISO 17087 .....................................................31

BS ISO 17334 .....................................................17

BS ISO 17499 .....................................................31

BS ISO 17500 .....................................................31

BS ISO 18898 .....................................................32

BS ISO 19212 .....................................................32

BS ISO 20299 .....................................................32

BS ISO 21869 .....................................................32

BS ISO 22768 .....................................................32

BS ISO 24335 .....................................................32

BS ISO 24338 .....................................................32

BS ISO 24340 .....................................................32

BS ISO 24341 .....................................................32

BS ISO 26945 .....................................................17

PD CEN/TR 15367 ...............................................17

BS EN ISO 17294 ................................................28BS EN ISO 17994 ................................................28BS EN ISO 21171 ................................................28BS EN 61675 ......................................................20BS ISO 5832 .......................................................17BS ISO 20665 .....................................................17BS ISO 23317 .....................................................17

Information systems

BS EN 14890 ......................................................12BS EN 61158 ..........................................15, 16, 24BS ISO/IEC 19757 ...............................................17DD ISO/TS 25237 ................................................18PD ISO/IEC TR 15504 ..........................................17

Management systems

BS 8848 ..............................................................19BIP 2154 .............................................................24BS EN 15696 ......................................................14BS EN 15707 ......................................................19BS EN 60027 ......................................................16BS EN 62428 ......................................................16BS EN 80000 ......................................................16BS ISO 31 .....................................................17, 24BS ISO 3534 .......................................................29BS ISO 80000 ...............................................17, 24PD 6668 .............................................................24

Materials and chemicals

BS 903 ..........................................................16, 23BS 2782 ........................................................24, 25BS 3424 ..............................................................26BS 3505 ........................................................20, 21BS 4140 ..............................................................25BS 4346 ........................................................20, 21BS 4443 ........................................................14, 23BS 5293 ..............................................................25BS 6057 ..............................................................25BS 7291 ..............................................................21DD CEN/TS 14421 ..............................................27DD CEN/TS 15750 ..............................................18DD CEN ISO/TS 15874 ........................................28DD CEN ISO/TS 15875 ........................................28DD CEN ISO/TS 15876 ........................................28BS EN ISO 105 ........................................19, 25, 26BS EN ISO 845 ....................................................23BS EN ISO 1167 ..................................................26BS EN ISO 1269 ..................................................26BS EN 1409 ........................................................10BS EN ISO 1622 ..................................................26BS EN 1765 ........................................................26BS EN ISO 1798 ..................................................23BS EN ISO 1856 ..................................................23BS EN ISO 1872 ..................................................26BS EN ISO 1923 ..................................................23BS EN ISO 2231 ..................................................26BS EN ISO 2419 ..................................................26BS EN ISO 2439 ..................................................11BS EN ISO 3385 ..................................................26BS EN ISO 3386 ..................................................23BS EN ISO 4098 ..................................................26BS EN ISO 4167 ..................................................26BS EN ISO 4375 ..................................................26BS EN ISO 4612 ..................................................26BS EN ISO 4613 ..................................................26BS EN ISO 5263 ..................................................26BS EN ISO 5269 ..................................................26BS EN ISO 5470 ..................................................26BS EN ISO 6383 ..................................................26BS EN ISO 7391 ............................................26, 27

BS ISO 4093 .......................................................29BS ISO 4309 .......................................................20BS ISO 4688 .......................................................30BS ISO 4992 .......................................................30BS ISO 6020 .......................................................30BS ISO 6022 .......................................................30BS ISO 6487 .......................................................20BS ISO 6967 .......................................................30BS ISO 7975 .......................................................30BS ISO 8083 .......................................................30BS ISO 8132 .......................................................30BS ISO 8178 .......................................................30BS ISO 8470 .......................................................30BS ISO 8528 .......................................................20BS ISO 8535 .......................................................30BS ISO 9136 .......................................................30BS ISO 9628 .......................................................30BS ISO 9816 .......................................................30BS ISO 10129 .....................................................30BS ISO 10521 .....................................................31BS ISO 10770 .....................................................31BS ISO 11565 .....................................................31BS ISO 11614 .....................................................31BS ISO 11783 .....................................................31BS ISO 12003 .....................................................17BS ISO 13292 .....................................................31BS ISO 13674 .....................................................31BS ISO 14245 .....................................................31BS ISO 14508 .....................................................31BS ISO 14512 .....................................................31BS ISO 14513 .....................................................31BS ISO 15003 .....................................................31BS ISO 15037 .....................................................31BS ISO 15242 .....................................................31BS ISO 15995 .....................................................31BS ISO 16134 .....................................................31BS ISO 16149 .....................................................31BS ISO 16234 .....................................................31BS ISO 18207 .....................................................32BS ISO 19472 .....................................................32BS ISO 19812 .....................................................32BS ISO 19813 .....................................................32BS ISO 19932 .....................................................32BS ISO 20826 .....................................................32BS ISO 21011 .....................................................17BS ISO 21308 .....................................................32BS ISO 22168 .....................................................32BS ISO 22241 .....................................................32BS ISO 22369 .....................................................32BS ISO 23933 .....................................................32BS ISO 24134 .....................................................32DD ISO/PAS 11154 .............................................31DD ISO/TS 13399 ................................................18PD ISO/TR 1281 ..................................................17PD ISO/TR 16806 ................................................31BS 3M 45 ...........................................................21BS AU 262 ..........................................................32BS AU 263 ..........................................................33BS AU 264 ..........................................................33

Health and environment

BS 6068 ...........................................20, 26, 27, 28BS EN 172 ..........................................................20BS EN ISO 6878 ..................................................26BS EN ISO 7405 ..................................................11BS EN ISO 10846 ................................................11BS EN ISO 11608 ................................................27BS EN ISO 13732 ................................................12BS EN 14407 ......................................................27BS EN 14614 ......................................................28BS EN ISO 16264 ................................................28

Update Standards Mar 2009 Prices may be subject to change. 5

British Standards – Quick Reference Guide continued...

BS EN ISO 12086 ................................................27BS EN ISO 12156 ................................................27BS EN 12175 ......................................................11BS EN ISO 12228 ................................................27BS EN 12273 ......................................................19BS EN 12484 ......................................................27BS EN 12734 ......................................................27BS EN 12828 ................................................19, 23BS EN 12831 ................................................19, 23BS EN 13032 ......................................................23BS EN 13083 ......................................................11BS EN 13510 ................................................11, 24BS EN 13597 ......................................................21BS EN ISO 13625 ................................................27BS EN ISO 13631 ................................................27BS EN 13696 ......................................................11BS EN 13721 ......................................................21BS EN 13722 ......................................................21BS EN ISO 13732 ................................................12BS EN 13997 ......................................................27BS EN 14073 ......................................................21BS EN ISO 14172 ................................................12BS EN 14336 ................................................19, 23BS EN ISO 14373 ................................................27BS EN 14375 ......................................................19BS EN 14407 ......................................................27BS EN 14420 ......................................................27BS EN 14422 ......................................................27BS EN 14423 ......................................................28BS EN 14424 ......................................................28BS EN 14614 ......................................................28BS EN ISO 14631 ................................................28BS EN ISO 14663 ................................................28BS EN 14890 ......................................................12BS EN 15029 ......................................................12BS EN 15031 ......................................................12BS EN 15166 ......................................................12BS EN 15194 ......................................................12BS EN 15268 ......................................................12BS EN 15288 ......................................................12BS EN 15316 ......................................................12BS EN 15436 ......................................................12BS EN ISO 15465 ................................................28BS EN 15507 ......................................................12BS EN 15608 ......................................................12BS EN 15620 ......................................................12BS EN 15629 ......................................................12BS EN 15633 ......................................................12BS EN 15634 ......................................................12BS EN 15635 ......................................................12BS EN 15644 ......................................................12BS EN 15655 ......................................................12BS EN 15696 ......................................................14BS EN ISO 15702 ................................................23BS EN 15702 ......................................................14BS EN 15704 ......................................................14BS EN 15707 ......................................................19BS EN ISO 15753 ................................................28BS EN ISO 15788 ................................................28BS EN 15800 ......................................................14BS EN ISO 15882 ................................................14BS EN ISO 16264 ................................................28BS EN ISO 16432 ................................................28BS EN ISO 16433 ................................................28BS EN ISO 17078 ................................................28BS EN ISO 17294 ................................................28BS EN ISO 17994 ................................................28BS EN 20105 ......................................................28BS EN ISO 21171 ................................................28BS EN ISO 21329 ................................................28BS EN ISO 24276 ................................................28BS EN 29367 ......................................................28

BS EN ISO 845 ....................................................23BS EN 999 ..........................................................19BS EN 1088 ........................................................19BS EN 1093 ........................................................19BS EN 1116 ........................................................21BS EN ISO 1167 ..................................................26BS EN ISO 1269 ..................................................26BS EN 1409 ........................................................10BS EN 1526 ........................................................19BS EN 1550 ........................................................19BS EN 1612 ........................................................20BS EN ISO 1622 ..................................................26BS EN 1646 ........................................................10BS EN ISO 1736 ..................................................10BS EN ISO 1737 ..................................................10BS EN 1765 ........................................................26BS EN ISO 1798 ..................................................23BS EN ISO 1854 ..................................................10BS EN ISO 1856 ..................................................23BS EN 1857 ........................................................20BS EN ISO 1872 ..................................................26BS EN 1886 ........................................................19BS EN 1914 ........................................................10BS EN ISO 1923 ..................................................23BS EN 1995 ........................................................20BS EN ISO 2231 ..................................................26BS EN ISO 2419 ..................................................26BS EN ISO 2439 ..................................................11BS EN ISO 2450 ..................................................11BS EN ISO 3385 ..................................................26BS EN ISO 3386 ..................................................23BS EN ISO 3449 ..................................................11BS EN ISO 3457 ..................................................11BS EN ISO 3471 ............................................11, 24BS EN ISO 4098 ..................................................26BS EN ISO 4167 ..................................................26BS EN ISO 4263 ..................................................26BS EN ISO 4375 ..................................................26BS EN ISO 4612 ..................................................26BS EN ISO 4613 ..................................................26BS EN ISO 5263 ..................................................26BS EN ISO 5269 ..................................................26BS EN ISO 5470 ..................................................26BS EN ISO 6149 ..................................................26BS EN ISO 6383 ..................................................26BS EN ISO 6683 ..................................................11BS EN ISO 6878 ..................................................26BS EN ISO 6885 ..................................................26BS EN ISO 7096 ..................................................11BS EN ISO 7208 ..................................................11BS EN ISO 7328 ..................................................11BS EN ISO 7369 ..................................................26BS EN ISO 7391 ............................................26, 27BS EN ISO 7405 ..................................................11BS EN ISO 7765 ..................................................27BS EN ISO 8381 ..................................................11BS EN 9101 ........................................................11BS EN ISO 9936 ..................................................27BS EN ISO 10058 ..........................................11, 24BS EN 10271 ......................................................21BS EN ISO 10308 ................................................27BS EN ISO 10407 ................................................11BS EN ISO 10417 ................................................27BS EN ISO 10424 ................................................27BS EN ISO 10426 ................................................27BS EN ISO 10427 ................................................27BS EN ISO 10432 ................................................27BS EN ISO 10447 ................................................27BS EN ISO 10846 ................................................11BS EN ISO 11608 ................................................27BS EN ISO 11961 ................................................11BS EN 12077 ......................................................19

Alpha-numeric sequence of BritishStandards quoted in this issue

BS 581 ................................................................21BS 684 ...................................................26, 27, 28BS 746 ................................................................19BS 903 ..........................................................16, 23BS 949 ................................................................24BS 1127 ..............................................................24BS 1659 ..............................................................21BS 1660 ..............................................................24BS 1745 ..............................................................21BS 1924 ..............................................................21BS 2011 ..............................................................14BS 2452 ..............................................................21BS 2472 ..............................................................11BS 2782 ........................................................24, 25BS 3087 ..............................................................25BS 3424 ..............................................................26BS 3505 ........................................................20, 21BS 3628 ..............................................................23BS 3934 ..............................................................23BS 4062 ..............................................................25BS 4140 ..............................................................25BS 4346 ........................................................20, 21BS 4443 ........................................................14, 23BS 5225 ..............................................................23BS 5293 ..............................................................25BS 5315 ..............................................................20BS 5341 ..............................................................25BS 5412 ..............................................................10BS 5449 ..............................................................23BS 5628 ........................................................18, 19BS 5975 ..............................................................19BS 6057 ..............................................................25BS 6068 ...........................................20, 26, 27, 28BS 6148 ..............................................................25BS 6222 ........................................................10, 23BS 6798 ..............................................................10BS 6912 ........................................................11, 24BS 7142 ..............................................................11BS 7275 ..............................................................25BS 7291 ..............................................................21BS 7570 ........................................................14, 23BS 8208 ..............................................................23BS 8434 ..............................................................23BS 8515 ..............................................................10BS 8848 ..............................................................19BS 9300 .................................................21, 22, 23BS 9301 ..............................................................22BS 9305 ..............................................................22BS 9364 ..............................................................22BS 9400 ..............................................................23BS 9430 ..............................................................23BS 9490 ..............................................................23BS 9493 ..............................................................23BIP 2154 .............................................................24BIP 3083 .............................................................18DD CEN/TS 13388 ..............................................19DD CEN/TS 14421 ..............................................27DD CEN/TS 15750 ..............................................18DD CEN/TS 15790 ..............................................18DD CEN ISO/TS 15530 ........................................18DD CEN ISO/TS 15874 ........................................28DD CEN ISO/TS 15875 ........................................28DD CEN ISO/TS 15876 ........................................28BS EN ISO 105 ........................................19, 25, 26BS EN 115 ..........................................................10BS EN 172 ..........................................................20BS EN 200 ....................................................10, 19BS EN ISO 662 ....................................................26BS EN 817 ..........................................................19

Alpha-numeric Sequence of British Standards


BS ISO 21869 .....................................................32BS ISO 22168 .....................................................32BS ISO 22241 .....................................................32BS ISO 22369 .....................................................32BS ISO 22768 .....................................................32BS ISO 23273 .....................................................32BS ISO 23275 .....................................................32BS ISO 23317 .....................................................17BS ISO 23933 .....................................................32BS ISO 24134 .....................................................32BS ISO 24335 .....................................................32BS ISO 24338 .....................................................32BS ISO 24340 .....................................................32BS ISO 24341 .....................................................32BS ISO 26945 .....................................................17BS ISO 80000 ...............................................17, 24BS CECC 50000 ..................................................23BS CECC 90000 ..................................................23DD ISO/PAS 11154 .............................................31DD ISO/TS 13399 ................................................18DD ISO/TS 25237 ................................................18DD IEC/PAS 62137 ..............................................18DD IEC/PAS 62562 ..............................................18DD IEC/PAS 62587 ..............................................18DD IEC/TS 61850 ................................................18DD IEC/TS 62492 ................................................18DD IEC/TS 62538 ................................................18NA to BS EN 1993 ..............................................10NA to BS EN 1999 ..............................................10PD ES 59008 ................................................22, 23PD CEN/TR 15367 ...............................................17PD CEN/TR 15615 ...............................................17PD 6668 .............................................................24PD 6695 .............................................................17PD 7639 .......................................................17, 24PD ISO/TR 210 ....................................................28PD ISO/TR 211 ....................................................28PD ISO/TR 1281 ..................................................17PD ISO/IEC TR 15504 ..........................................17PD ISO/TR 16806 ................................................31PD CLC/TR 50378 ...............................................17PD IEC/TR 60909 ..........................................17, 24PD IEC/TR 62572 ................................................18BS 3M 45 ...........................................................21BS E9372 ............................................................24BS E9375 ............................................................24BS AU 262 ..........................................................32BS AU 263 ..........................................................33BS AU 264 ..........................................................33PAS 197 .............................................................18PAS 2020 ...........................................................18

BS ISO 4992 .......................................................30BS ISO 5832 .......................................................17BS ISO 6020 .......................................................30BS ISO 6022 .......................................................30BS ISO 6101 .......................................................30BS ISO 6118 .......................................................30BS ISO 6446 .......................................................30BS ISO 6487 .......................................................20BS ISO 6886 .......................................................30BS ISO 6967 .......................................................30BS ISO 7975 .......................................................30BS ISO 8083 .......................................................30BS ISO 8118 .......................................................30BS ISO 8132 .......................................................30BS ISO 8178 .......................................................30BS ISO 8312 .......................................................30BS ISO 8332 .......................................................30BS ISO 8470 .......................................................30BS ISO 8528 .......................................................20BS ISO 8535 .......................................................30BS ISO 9028 .......................................................30BS ISO 9128 .......................................................30BS ISO 9136 .......................................................30BS ISO 9628 .......................................................30BS ISO 9816 .......................................................30BS ISO 9844 .......................................................30BS ISO 9874 .......................................................30BS ISO 10129 .....................................................30BS ISO 10368 .....................................................30BS ISO 10521 .....................................................31BS ISO 10770 .....................................................31BS ISO 11235 .....................................................31BS ISO 11565 .....................................................31BS ISO 11614 .....................................................31BS ISO 11783 .....................................................31BS ISO 12003 .....................................................17BS ISO 12078 .....................................................31BS ISO 13292 .....................................................31BS ISO 13674 .....................................................31BS ISO 13990 .....................................................31BS ISO 14245 .....................................................31BS ISO 14508 .....................................................31BS ISO 14512 .....................................................31BS ISO 14513 .....................................................31BS ISO 14531 .....................................................31BS ISO 15003 .....................................................31BS ISO 15037 .....................................................31BS ISO 15242 .....................................................31BS ISO 15585 .....................................................31BS ISO 15971 .....................................................17BS ISO 15995 .....................................................31BS ISO 16134 .....................................................31BS ISO 16149 .....................................................31BS ISO 16234 .....................................................31BS ISO 17087 .....................................................31BS ISO 17334 .....................................................17BS ISO 17499 .....................................................31BS ISO 17500 .....................................................31BS ISO 18207 .....................................................32BS ISO 18252 .....................................................32BS ISO 18898 .....................................................32BS ISO 19212 .....................................................32BS ISO 19472 .....................................................32BS ISO/IEC 19757 ...............................................17BS ISO 19812 .....................................................32BS ISO 19813 .....................................................32BS ISO 19932 .....................................................32BS ISO 20299 .....................................................32BS ISO 20665 .....................................................17BS ISO 20826 .....................................................32BS ISO 21011 .....................................................17BS ISO 21308 .....................................................32

BS EN 50085 ......................................................14BS EN 50106 ......................................................14BS EN 50136 ......................................................14BS EN 50200 ......................................................23BS EN 50216 ......................................................14BS EN 50408 ......................................................14BS EN 50492 ......................................................14BS EN 50504 ................................................14, 23BS EN 50521 ......................................................14BS EN 60027 ......................................................16BS EN 60068 ................................................14, 24BS EN 60079 ......................................................14BS EN 60335 ................................................20, 24BS EN 60384 ......................................................24BS EN 60404 ......................................................20BS EN 60512 ................................................14, 15BS EN 60519 ......................................................15BS EN 60598 ......................................................15BS EN 60704 ......................................................24BS EN 60730 ......................................................24BS EN 60793 ......................................................15BS EN 60794 ......................................................15BS EN 60851 ......................................................15BS EN 60904 ......................................................15BS EN 61000 ......................................................24BS EN 61058 ......................................................24BS EN 61158 ..........................................15, 16, 24BS EN 61162 ......................................................16BS EN 61400 ......................................................16BS EN 61675 ......................................................20BS EN 62227 ......................................................16BS EN 62288 ......................................................16BS EN 62305 ......................................................20BS EN 62428 ......................................................16BS EN 62491 ......................................................16BS EN 80000 ......................................................16BS EN 131800 ....................................................24DD ENV 13696 ...................................................11BS ISO 31 .....................................................17, 24BS ISO 247 .........................................................28BS ISO 363 ...................................................28, 29BS ISO 368 .........................................................29BS ISO 525 .........................................................29BS ISO 603 .........................................................29BS ISO 815 ...................................................16, 23BS ISO 1085 .......................................................29BS ISO 1126 .......................................................29BS ISO 1304 .......................................................29BS ISO 1409 .......................................................29BS ISO 1434 .......................................................29BS ISO 1540 .......................................................29BS ISO 2028 .......................................................29BS ISO 2475 .......................................................29BS ISO 2561 .......................................................29BS ISO 2697 .......................................................29BS ISO 2705 .......................................................29BS ISO 2943 .......................................................29BS ISO 3290 .................................................16, 17BS ISO 3366 .......................................................29BS ISO 3534 .......................................................29BS ISO 3842 .......................................................29BS ISO 3888 .......................................................29BS ISO 3976 .......................................................29BS ISO 4093 .......................................................29BS ISO 4195 .......................................................17BS ISO 4309 .......................................................20BS ISO 4658 .......................................................30BS ISO 4660 .......................................................30BS ISO 4688 .......................................................30BS ISO 4926 .......................................................30BS ISO 4928 .......................................................30BS ISO 4930 .......................................................30

Alpha-numeric Sequence of British Standards continued...


Please

do not send

confirmation

of

orders placed by

telephone

as it can lead to

duplication

10 Update Standards Mar 2009Prices may be subject to change.10

BRITISH STANDARDS

The following British Standardpublications are available fromBSI Customer Services (see ’How to order’on page 2).

The publications listed below are newand revised British Standards that weremade available last month.

An existing BSI publication bearing anumber identical to one announcedbelow is automatically withdrawn unlessstated otherwise.

In all other cases of supersession, detailsare given and a corresponding entryappears in the ’British Standardswithdrawn’ section.

BRITISH STANDARD IMPLEMENTATIONSWILL BE SUPPLIED IN PREFERENCE TOEUROPEAN OR INTERNATIONALSTANDARDS, UNLESS OTHERWISEREQUESTED.

Please order by the British Standardreference not the ISBN number.

BS 2000 series standards are also availablefrom:–Library of the Energy Institute61 New Cavendish StreetLondon W1G 7ARTel: 020 7467 7100Fax: 020 7255 1472Email: [email protected] this series, member pricing isapplicable to BSI and Energy Institutemembers.

BS 6222:—Domestic kitchen equipment

BS 6222-2:2009Fitted kitchen units, peninsular units, islandunits and breakfast bars. Performancerequirements and test methods

supersedes BS 6222-2:1997 and BS 6222-5:1995ISBN 978 0 580 57903 5£60.00 members, £120.00 non-members

FW/0/2

BS 6798:2009Specification for installation and maintenanceof gas-fired boilers of rated input notexceeding 70 kW net

supersedes BS 6798:2000ISBN 978 0 580 59048 1£79.00 members, £158.00 non-members

GSE/30

BS 8515:2009Rainwater harvesting systems. Code of practice

no current standard is supersededISBN 978 0 580 60490 4£79.00 members, £158.00 non-members

CB/506

BS EN 200:2008Sanitary tapware. Single taps and combinationtaps for water supply systems of type 1 andtype 2. General technical specification

supersedes BS EN 200:1992 which is withdrawn andBS 5412:1996 which is declared obsolescentISBN 978 0 580 66665 0£84.00 members, £168.00 non-members

B/504/8

BS EN 1409:2008Chemicals used for water treatment intendedfor human consumption. Polyamines

supersedes BS EN 1409:1998ISBN 978 0 580 58027 7£60.00 members, £120.00 non-members

CII/59

BS EN 1646:—Leisure accommodation vehicles. Motorcaravans

BS EN 1646-2:2008User payload

supersedes BS EN 1646-2:1999ISBN 978 0 580 60106 4£34.00 members, £68.00 non-members

B/511

BS EN ISO 1736:2008Dried milk and dried milk products.Determination of fat content. Gravimetricmethod (Reference method)

supersedes BS EN ISO 1736:2000ISBN 978 0 580 63533 5£42.00 members, £84.00 non-members

AW/5

BS EN ISO 1737:2008Evaporated milk and sweetened condensedmilk. Determination of fat content. Gravimetricmethod (Reference method)


AW/5

BS EN ISO 1854:2008Whey cheese. Determination of fat content.Gravimetric method (Reference method)


AW/5

BS EN 1914:2009Inland navigation vessels. Work boats, ship’sboats and lifeboats


SME/32/-/7

NA to BS EN 1993:—UK National Annex (informative) to Eurocode 3.Design of steel structures

NA to BS EN 1993-1-10:2005Material toughness and through thicknessproperties


B/525/31

NA to BS EN 1999:—UK National Annex to Eurocode 9

NA to BS EN 1999-1:—Design of aluminium structures

NA to BS EN 1999-1-2:2007Structural fire design


B/525/9

NA to BS EN 1999-1-4:2007Cold-formed structural sheeting


B/525/9

NA to BS EN 1999-1-5:2007Shell structures


B/525/9

BS EN PUBLICATIONS

The following are British Standardimplementations of the English languageversions of European Standards (ENs).

BSI has an obligation to publish all ENsand to withdraw any conflicting BritishStandards. This has led to a series ofstandards, BS ENs, using the EN number.

Note: The date referenced in theidentifier is the date of the Europeanstandard.

BS EN 115:—Safety of escalators and moving walks

BS EN 115-1:2008Construction and installation


MHE/4

British Standards

BS EN ISO 10407:—Petroleum and natural gas industries. Rotarydrilling equipment

BS EN ISO 10407-2:2008Inspection and classification of used drill stemelements


PSE/17/-/4

BS EN ISO 10846:—Acoustics and vibration. Laboratorymeasurement of vibro-acoustic transferproperties of resilient elements

BS EN ISO 10846-1:2008Principles and guidelines

supersedes BS EN ISO 10846-1:1999ISBN 978 0 580 53987 9£69.00 members, £138.00 non-members

EH/1/4

BS EN ISO 11961:2008Petroleum and natural gas industries. Steel drillpipe


PSE/17/-/5

BS EN 12175:2006Chemicals used for treatment of water intendedfor human consumption. Hexafluorosilicic acid


CII/59

BS EN 13083:2008Tanks for transport of dangerous goods. Serviceequipment for tanks. Adaptor for bottomloading and unloading


AUE/18

BS EN 13696:2008Wood flooring. Test methods to determineelasticity and resistance to wear and impactresistance

supersedes DD ENV 13696:2001ISBN 978 0 580 56450 5£60.00 members, £120.00 non-members

B/543

BS EN ISO 7328:2008Milk-based edible ices and ice mixes.Determination of fat content. Gravimetricmethod (Reference method)

supersedes the dual numbered standardBS EN ISO 7328:2000, BS 2472-3:2000ISBN 978 0 580 63536 6£60.00 members, £120.00 non-members

AW/5

BS EN ISO 7405:2008Dentistry. Evaluation of biocompatibility ofmedical devices used in dentistry


CH/106

BS EN ISO 8381:2008Milk-based infant foods. Determination of fatcontent. Gravimetric method (Referencemethod)


AW/5

BS EN 9101:2008Aerospace series. Quality management systems.Assessment (based on ISO 9001:2000)


ACE/1

BS EN ISO 10058:—Chemical analysis of magnesite and dolomiterefractory products (alternative to the X-rayfluorescence method)

BS EN ISO 10058-1:2008Apparatus, reagents, dissolution anddetermination of gravimetric silica


RPI/1

BS EN ISO 10058-2:2008Wet chemical analysis


RPI/1

BS EN ISO 10058-3:2008Flame atomic absorption spectrophotometry(FAAS) and inductively coupled plasma atomicemission spectrometry (ICP-AES)


RPI/1

BS EN ISO 2439:2008Flexible cellular polymeric materials.Determination of hardness (indentationtechnique)


PRI/24

BS EN ISO 2450:2008Cream. Determination of fat content.Gravimetric method (Reference method)


AW/5

BS EN ISO 3449:2008Earth-moving machinery. Falling-objectprotective structures. Laboratory tests andperformance requirements


B/513/1

BS EN ISO 3457:2008Earth-moving machinery. Guards. Definitionsand requirements


B/513/1

BS EN ISO 3471:2008Earth-moving machinery. Roll-over protectivestructures. Laboratory tests and performancerequirements

supersedes the dual numbered standardBS EN 13510:2000, BS 6912-14:2000ISBN 978 0 580 63517 5£69.00 members, £138.00 non-members

B/513/1

BS EN ISO 6683:2008Earth-moving machinery. Seat belts and seatbelt anchorages. Performance requirements andtests


B/513/1

BS EN ISO 7096:2008Earth-moving machinery. Laboratory evaluationof operator seat vibration


B/513/1

BS EN ISO 7208:2008Skimmed milk, whey and buttermilk.Determination of fat content. Gravimetricmethod (Reference method)


AW/5


e-mail

your order

[email protected]

BS EN 15620:2008Steel static storage systems. Adjustable palletracking. Tolerances, deformations andclearances


MHE/8

BS EN 15629:2008Steel static storage systems. Specification ofstorage equipment


MHE/8

BS EN 15633:—Foodstuffs. Detection of food allergens byimmunological methods

BS EN 15633-1:2009General considerations


AW/-/3

BS EN 15634:—Foodstuffs. Detection of food allergens bymolecular biological methods

BS EN 15634-1:2009General considerations


AW/-/3

BS EN 15635:2008Steel static storage systems. Application andmaintenance of storage equipment


MHE/8

BS EN 15644:2008Traditionally designed prefabricated stairs madeof solid wood. Specifications and requirements


B/543

BS EN 15655:2009Ductile iron pipes, fittings and accessories.Internal polyurethane lining for pipes andfittings. Requirements and test methods


PSE/10

BS EN 15268:2008Petrol filling stations. Safety requirements forthe construction of submersible pumpassemblies


PVE/21

BS EN 15288:—Swimming pools

BS EN 15288-1:2008Safety requirements for design


SW/136

BS EN 15288-2:2008Safety requirements for operation


SW/136

BS EN 15316:—Heating systems in buildings. Method forcalculation of system energy requirements andsystem efficiencies

BS EN 15316-4-7:2008Space heating generation systems, biomasscombustion systems


RHE/24

BS EN 15436:—Road service area maintenance equipment

BS EN 15436-2:2008Performance assessment


B/513

BS EN 15507:2008Packaging. Transport packaging for dangerousgoods. Comparative material testing ofpolyethylene grades


PKW/0

BS EN 15608:2008Surface active agents. Quantitativedetermination of free fatty acid inalkylamidopropylbetaines. Gas-chromatographicmethod


CII/34

BS EN ISO 13732:—Ergonomics of the thermal environment.Methods for the assessment of humanresponses to contact with surfaces

BS EN ISO 13732-1:2008Hot surfaces

supersedes BS EN ISO 13732-1:2006ISBN 978 0 580 65126 7£79.00 members, £158.00 non-members

PH/9/1

BS EN ISO 14172:2008Welding consumables. Covered electrodes formanual metal arc welding of nickel and nickelalloys. Classification


WEE/39

BS EN 14890:—Application interface for smart cards used assecure signature creation devices

BS EN 14890-1:2008Basic services


IST/17

BS EN 15029:2006Products used for treatment of water intendedfor human consumption. Iron (III) hydroxideoxide


CII/59

BS EN 15031:2006Chemicals used for treatment of swimming poolwater. Aluminium based coagulants


CII/59

BS EN 15166:2008Food processing machinery. Automatic backsplitting machines of butchery carcasses. Safetyand hygiene requirements


MCE/3/5

BS EN 15194:2009Cycles. Electrically power assisted cycles. EPACbicycles


GME/25

BS EN Publications continued...


BS EN 60068-2-31:2008Test Ec. Rough handling shocks, primarily forequipment-type specimens

supersedes BS EN 60068-2-31:1993 andBS EN 60068-2-32:1993ISBN 978 0 580 55736 1£42.00 members, £84.00 non-members

GEL/104

BS EN 60079:—Explosive atmospheres

BS EN 60079-14:2008Electrical installations design, selection anderection


GEL/31/11

BS EN 60512:—Connectors for electronic equipment. Tests andmeasurements

BS EN 60512-16:—Mechanical tests on contacts and terminations

BS EN 60512-16-3:2008Test 16c. Contact-bending strength


EPL/48

BS EN 60512-16-6:2008Test 16f. Robustness of terminations


EPL/48

BS EN 60512-16-7:2008Test 16g. Measurement of contact deformationafter crimping


EPL/48

BS EN 60512-16-14:2008Test 16n. Bending strength, fixed male tabs


EPL/48

BS EN 60512-16-16:2008Test 16p. Torsional strength, fixed male tabs


EPL/48

BS EN 50136:—Alarm systems. Alarm transmission systems andequipment

BS EN 50136-1-5:2008Requirements for packet switched network PSN


GW/1/5

BS EN 50216:—Power transformer and reactor fittings

BS EN 50216-11:2008Oil and winding temperature indicators


PEL/14

BS EN 50408:2008Household and similar electrical appliances.Safety. Particular requirements for cab heatersfor vehicles


CPL/61/07

BS EN 50492:2008Basic standard for the in-situ measurement ofelectromagnetic field strength related tohuman exposure in the vicinity of base stations


GEL/106

BS EN 50504:2008Validation of arc welding equipment

supersedes BS 7570:2000ISBN 978 0 580 58174 8£60.00 members, £120.00 non-members

WEE/6

BS EN 50521:2008Connectors for photovoltaic systems. Safetyrequirements and tests


GEL/82

BS EN 60068:—Environmental testing

BS EN 60068-2:—Tests

BS EN 60068-2-20:2008Test T. Test methods for solderability andresistance to soldering heat of devices withleads

supersedes BS 2011-2.1T:1981 which remainscurrentISBN 978 0 580 55763 7£60.00 members, £120.00 non-members

EPL/501

BS EN 15696:2008Self storage. Specification for self storageservices


SVS/7/3

BS EN 15702:2008Cellular plastics. Cell count procedure forflexible and rigid polyurethane

supersedes BS 4443-1:1988ISBN 978 0 580 58983 6£34.00 members, £68.00 non-members

PRI/24

BS EN 15704:2008Liming materials. Determination of thebreakdown of granulated calcium andcalcium/magnesium carbonates under theinfluence of water


CII/37

BS EN 15800:2008Cylindrical helical springs made of round wire.Quality specifications for cold coiledcompression springs


GME/15

BS EN ISO 15882:2008Sterilization of health care products. Chemicalindicators. Guidance for selection, use andinterpretation of results


LBI/35

BS EN 50085:—Cable trunking systems and cable ductingsystems for electrical installations

BS EN 50085-2-2:2008Particular requirements for cable trunkingsystems and cable ducting systems intended formounting underfloor, flushfloor, or onfloor


PEL/213

BS EN 50106:2008Safety of household and similar electricalappliances. Particular rules for routine testsreferring to appliances under the scope ofEN 60335-1

supersedes BS EN 50106:1997 which remainscurrentISBN 978 0 580 61272 5£60.00 members, £120.00 non-members

CPL/61



BS EN 61158-3-4:2008Type 4 elements

supersedes BS EN 61158-3:2004 which remainscurrentISBN 978 0 580 61563 4£60.00 members, £120.00 non-members

AMT/7



AMT/7



AMT/7



AMT/7



AMT/7



AMT/7



AMT/7



AMT/7

BS EN 60851:—Winding wires. Test methods

BS EN 60851-5:2008Electrical properties


GEL/55

BS EN 60904:—Photovoltaic devices

BS EN 60904-3:2008Measurement principles for terrestrialphotovoltaic (PV) solar devices with referencespectral irradiance data


GEL/82

BS EN 61158:—Industrial communication networks. Fieldbusspecifications

BS EN 61158-2:2008Physical layer specification and servicedefinition


AMT/7

BS EN 61158-3:—Data-link layer service definition



AMT/7



AMT/7



AMT/7

BS EN 60512-16-17:2008Test 16q. Tensile and compressive strength,fixed male tabs


EPL/48

BS EN 60519:—Safety in electroheat installations

BS EN 60519-7:2009Particular requirements for installations withelectron guns


PEL/27

BS EN 60598:—Luminaires

BS EN 60598-1:2008General requirements and tests


CPL/34/4

BS EN 60793:—Optical fibres

BS EN 60793-2-50:2008Product specifications. Sectional specificationfor class B single-mode fibres

supersedes BS EN 60793-2-50:2004ISBN 978 0 580 57362 0£69.00 members, £138.00 non-members

GEL/86/1

BS EN 60794:—Optical fibre cables

BS EN 60794-2-41:2008Indoor cables. Product specification for simplexand duplex buffered A4 fibres


GEL/86/1

BS EN 60794-3-30:2008Outdoor cables. Family specification for opticaltelecommunication cables for lakes, rivercrossings and coastal application

supersedes BS EN 60794-3-30:2003ISBN 978 0 580 56833 6£60.00 members, £120.00 non-members

GEL/86/1


BS EN 62428:2008Electric power engineering. Modal componentsin three-phase A.C. systems. Quantities andtransformations


SS/7

BS EN 62491:2008Industrial systems, installations and equipmentand industrial products. Labelling of cables andcores


GEL/3

BS EN 80000:—Quantities and units

BS EN 80000-13:2008Information science and technology

partially supersedes BS EN 60027-2:2007ISBN 978 0 580 59469 4£60.00 members, £120.00 non-members

SS/7

BS IMPLEMENTATIONS

BS Implementations comprise the ISO orIEC text without any national deviationand with front and back cover indicatingthe UK committee responsible.No other information will normally beadded.

Note: The date referenced in theidentifier is the date of the internationalstandard.

BS ISO 815:—Rubber, vulcanized or thermoplastic.Determination of compression set

BS ISO 815-1:2008At ambient and elevated temperatures

supersedes BS 903-A6:1992ISBN 978 0 580 55587 9£42.00 members, £84.00 non-members

PRI/22

BS ISO 3290:—Rolling bearings. Balls

BS ISO 3290-1:2008Steel balls

supersedes BS ISO 3290:2001ISBN 978 0 580 58384 1£42.00 members, £84.00 non-members

MCE/7



AMT/7



AMT/7



AMT/7

BS EN 61162:—Maritime navigation and radiocommunicationequipment and systems. Digital interfaces

BS EN 61162-3:2008Serial data instrument network


EPL/80

BS EN 61400:—Wind turbines

BS EN 61400-21:2008Measurement and assessment of power qualitycharacteristics of grid connected wind turbines


PEL/88

BS EN 62227:2008Multimedia home server systems. Digital rightspermission code


EPL/100

BS EN 62288:2008Maritime navigation and radiocommunicationequipment and systems. Presentation ofnavigation-related information on shipbornenavigational displays. General requirements,methods of testing and required test results


EPL/80



AMT/7

BS EN 61158-5:—Application layer service definition



AMT/7



AMT/7



AMT/7



AMT/7



AMT/7



AMT/7



AMT/7



PD 6695-1-10:2009Recommendations for the design of structuresto BS EN 1993-1-10


B/525/31

PD CEN/TR 15367:—Petroleum products. Guide for goodhousekeeping

PD CEN/TR 15367-1:2007Automotive diesel fuels


PTI/2

PD ISO/IEC TR 15504:—Information technology. Process assessment

PD ISO/IEC TR 15504-6:2008An exemplar system life cycle processassessment model


IST/15

PD CEN/TR 15615:2008Explanation of the general relationshipbetween various CEN standards and the EnergyPerformance of Buildings Directive (EPBD).Umbrella document


B/540

PD CLC/TR 50378:—Passive components to be used in optical fibrecommunication systems. Product specifications

PD CLC/TR 50378-2-1:2009SC(SC2)-PC connector-type fixed opticalattenuators using IEC 60793-2 Category B1.1singlemode fibre


GEL/86/2

PD IEC/TR 60909:—Short-circuit currents in three-phase A.C.systems

PD IEC/TR 60909-2:2008Data of electrical equipment for short-circuitcurrent calculations

supersedes PD 7639-2:1994ISBN 978 0 580 62329 5£79.00 members, £158.00 non-members

PEL/73

BS ISO 20665:2008Water quality. Determination of chronic toxicityto Ceriodaphnia dubia


EH/3/5

BS ISO 21011:2008Cryogenic vessels. Valves for cryogenic service


PVE/18

BS ISO 23317:2007Implants for surgery. In vitro evaluation forapatite-forming ability of implant materials


CH/150/1

BS ISO 26945:2008Metallic and other inorganic coatings.Electrodeposited coatings of tin-cobalt alloy


STI/33

BS ISO 80000:—Quantities and units

BS ISO 80000-7:2008Light

supersedes BS ISO 31-6:1992ISBN 978 0 580 54867 3£84.00 members, £168.00 non-members

SS/7

PUBLISHED DOCUMENTS

PD ISO/TR 1281:—Rolling bearings. Explanatory notes on ISO 281

PD ISO/TR 1281-1:2008Basic dynamic load rating and basic rating life


MCE/7

PD ISO/TR 1281-2:2008Modified rating life calculation, based on asystems approach to fatigue stresses


MCE/7

BS ISO 3290-2:2008Ceramic balls


MCE/7

BS ISO 4195:2007Conveyor belts with heat-resistant rubbercovers. Heat resistance of covers. Requirementsand test methods


PRI/67

BS ISO 5832:—Implants for surgery. Metallic materials

BS ISO 5832-14:2007Wrought titanium 15-molybdenum 5-zirconium3-aluminium alloy


CH/150/1

BS ISO 12003:—Agricultural and forestry tractors. Roll-overprotective structures on narrow-track wheeledtractors

BS ISO 12003-2:2008Rear-mounted ROPS

supersedes BS ISO 12003-2:2002ISBN 978 0 580 57033 9£79.00 members, £158.00 non-members

AGE/6

BS ISO 15971:2008Natural gas. Measurement of properties.Calorific value and Wobbe index


PTI/15

BS ISO 17334:2008Metallic and other inorganic coatings.Autocatalytic nickel over autocatalytic copperfor electromagnetic shielding


STI/33

BS ISO/IEC 19757:—Information technology. Document schemadefinition languages (DSDL)

BS ISO/IEC 19757-8:2008Document semantics renaming language (DSRL)


IST/41


PUBLICLY AVAILABLESPECIFICATIONS

Publicly Available Specifications (formerlyProduct Assessment Specifications) areissued to provide an interim documentwhere there is a market need but wherea full British or European Standard hasyet to be published.

PAS 197:2009Code of practice for cultural collectionsmanagement


PAS 2020:2009Direct marketing. Environmental performance.Specification


SPECIALIST BOOKS FROMBSI

BIP 3083:2009 (CD-ROM)Graphical symbols for use in the labelling ofmedical devices

supersedes BIP 3083:2008ISBN 978 0 580 50979 7£85.01 members, £150.00 non-membersVAT is applicable to this item.

AMENDMENTS TO BRITISHSTANDARDS

Most amendments are not issuedseparately. Those that make significantchanges to a standard are incorporatedinto the standard which is re-issued as anew edition (see ’Updated BritishStandards’). Amendments which makesmaller changes or corrections areavailable on request, free of charge topast purchasers of the standard. Allamendments to date of despatch areincluded within any main publicationwhen ordered for the first time.

The following amendments to BritishStandards were made available lastmonth.

BS 5628:—Code of practice for the use of masonry

BS 5628-1:2005Structural use of unreinforced masonry

CORRIGENDUM 1

B/525/6

DD IEC/TS 61850:—Communication networks and systems forpower utility automation

DD IEC/TS 61850-80-1:2009Guideline to exchanging information from aCDC-based data model using IEC 60870-5-101 orIEC 60870-5-104

no current standard is superseded

ISBN 978 0 580 61697 6£95.00 members, £190.00 non-members

PEL/57

DD IEC/PAS 62137:—Electronics assembly technology

DD IEC/PAS 62137-3:2009Selection guidance of environmental andendurance test methods for solder joints



EPL/501

DD IEC/TS 62492:—Industrial process control devices. Radiationthermometers

DD IEC/TS 62492-1:2008Technical data for radiation thermometers



GEL/65/2

DD IEC/TS 62538:2009Categorization of optical devices



GEL/86

DD IEC/PAS 62562:2008Cavity resonator method to measure thecomplex permittivity of low-loss dielectric plates



EPL/46/2

DD IEC/PAS 62587:2008Method for measuring performance of portablehousehold electric room air cleaners



CPL/59

PD IEC/TR 62572:—Fibre optic active components and devices.Reliability standards

PD IEC/TR 62572-2:2008Laser module degradation


GEL/86/3

DRAFTS FOR DEVELOPMENT

DD ISO/TS 13399:—Cutting tool data representation and exchange

DD ISO/TS 13399-100:2008Definitions, principles and methods forreference dictionaries

supersedes DD ISO/TS 13399-100:2004ISBN 978 0 580 64746 8£69.00 members, £138.00 non-members

MTE/18

DD CEN ISO/TS 15530:—Geometrical product specifications (GPS).Coordinate measuring machines (CMM).Technique for determining the uncertainty ofmeasurement

DD CEN ISO/TS 15530-3:2007Use of calibrated workpieces or standards


TDW/4

DD CEN/TS 15750:2006Fertilizers. Determination of different forms ofnitrogen in fertilizers containing nitrogen onlyas nitric, ammoniacal and urea nitrogen by twodifferent methods


CII/37

DD CEN/TS 15790:2008Animal feeding stuffs. PCR typing of probioticstrains of Saccharomyces cerevisiae (yeast)


AW/10

DD ISO/TS 25237:2008Health informatics. Pseudonymization


IST/35

Published Documents continued...


BS EN ISO 105:—Textiles. Tests for colour fastness

BS EN ISO 105-C08:2002+A1:2008Colour fastness to domestic and commerciallaundering using a non-phosphate referencedetergent incorporating a low temperaturebleach activator

AMENDMENT 1£42.00 members, £84.00 non-members

TCI/81

BS EN 999:1998+A1:2008Safety of machinery. The positioning ofprotective equipment in respect of approachspeeds of parts of the human body


MCE/3

Also incorporates Corrigendum 1.

BS EN 1093:—Safety of machinery. Evaluation of the emissionof airborne hazardous substances

BS EN 1093-2:2006+A1:2008Tracer gas method for the measurement of theemission rate of a given pollutant


MCE/3

BS EN 1093-7:1998+A1:2008Separation efficiency by mass, ducted outlet


MCE/3

BS EN 1093-9:1998+A1:2008Pollutant concentration parameter, roommethod


MCE/3

BS EN 1093-11:2001+A1:2008Decontamination index


MCE/3

BS EN 1526:1997+A1:2008Safety of industrial trucks. Additionalrequirements for automated functions on trucks


MHE/7

BS EN 1550:1997+A1:2008Machine-tools safety. Safety requirements forthe design and construction of work holdingchucks


MTE/1

BS EN 12831:2003Heating systems in buildings. Method forcalculation of the design heat load

CORRIGENDUM 1

RHE/24

DD CEN/TS 13388:2008Copper and copper alloys. Compendium ofcompositions and products

CORRIGENDUM 1

NFE/34

BS EN 14336:2004Heating systems in buildings. Installation andcommissioning of water based heating systems

CORRIGENDUM 1

RHE/24

BS EN 14375:2003Child-resistant non-reclosable packaging forpharmaceutical products. Requirements andtesting

CORRIGENDUM 2

PKW/0/3


BS EN 15707:2008Print media surveys. Vocabulary and servicerequirements

CORRIGENDUM 1

SVS/3

UPDATED BRITISHSTANDARDS

The following standards have beenamended and the amendments havebeen incorporated into an updatedstandard.

NOTE: Updated British Standardsmust be reordered as theamendments are not availableseparately.

BS 746:2005+A1:2009Specification for gas meter unions and adaptors


GSE/25

BS 8848:2007+A1:2009Specification for the provision of visits,fieldwork, expeditions, and adventurousactivities, outside the United Kingdom


SVS/2/5

BS 5628-2:2005Structural use of reinforced and prestressedmasonry

CORRIGENDUM 1

B/525/6

BS 5628-3:2005Materials and components, design andworkmanship

CORRIGENDUM 1

B/525/6

BS 5975:2008Code of practice for temporary worksprocedures and the permissible stress design offalsework

CORRIGENDUM 1

B/514/26

BS EN 200:2008Sanitary tapware. Single taps and combinationtaps for water supply systems of type 1 andtype 2. General technical specification

CORRIGENDUM 1

B/504/8

BS EN 817:2008Sanitary tapware. Mechanical mixing valves (PN 10). General technical specifications

CORRIGENDUM 1

B/504/8

BS EN 1088:1995+A2:2008Safety of machinery. Interlocking devicesassociated with guards. Principles for designand selection

CORRIGENDUM 1

MCE/3

Also incorporates Amendments 1 & 2.

BS EN 1886:2007Ventilation for buildings. Air handling units.Mechanical performance

CORRIGENDUM 1

RHE/2

BS EN 12077:—Cranes safety. Requirements for health andsafety

BS EN 12077-2:1998+A1:2008Limiting and indicating devices

CORRIGENDUM 1

MHE/3/11

Also incorporates Amendment 1.

BS EN 12273:2008Slurry surfacing. Requirements

CORRIGENDUM 1

B/510/2

BS EN 12828:2003Heating systems in buildings. Design for water-based heating systems

CORRIGENDUM 1

RHE/24


e-mail

your order

[email protected]

BRITISH STANDARDSREVIEWED ANDCONFIRMED

It is BSI policy for every standard to bereviewed by the technical committeeresponsible not more than five years afterpublication, to establish whether it is stillcurrent and, if it is not, to identify and setin hand appropriate action.

Confirmation indicates the continuingcurrency of a standard.

Where any standard in this list has beenamended since publication, confirmationincludes all amendments published todate. Reference to a particularamendment indicates that it is publishedconcurrently with the confirmation.

BS 5315:1991Hose clamps (worm drive type) for generalpurpose use (metric series)

PSE/6

BS 6068:—Water quality

BS 6068-2:—Physical, chemical and biochemical methods

BS 6068-2.42:1993Determination of sodium and potassium:determination of sodium by atomic absorptionspectrometry

EH/3/2

BS 6068-2.43:1993Determination of sodium and potassium:determination of potassium by atomicabsorption spectrometry

EH/3/2

BS 6068-2.44:1993Determination of sodium and potassium:determination of sodium and potassium byflame emission spectrometry

EH/3/2

BS 6068-2.45:1993Determination of selenium by atomicabsorption spectrometry

EH/3/2

BS 6068-4.12:1998Microbiological methods. Detection andenumeration of Legionella

EH/3/4

BS EN 172:1995Specification for sunglare filters used inpersonal eye-protectors for industrial use

PH/2/1

BS ISO 6487:2002+A1:2008Road vehicles. Measurement techniques inimpact tests. Instrumentation


AUE/7

SPECIAL ANNOUNCEMENTS

Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000

BS 3505:1986Specification for unplasticized polyvinyl chloride(PVC-U) pressure pipes for cold potable water

This standard was withdrawn in error and hasnow been reinstated as current andobsolescent.Contact: Committee Service CentreEmail: [email protected]

PRI/88

BS 4346:—Joints and fittings for use with unplasticizedPVC pressure pipes

BS 4346-1:1969Injection moulded unplasticized PVC fittings forsolvent welding for use with pressure pipes,including potable water supply

This standard was withdrawn in error and hasnow been reinstated as current andobsolescent.Contact: Committee Service CentreEmail: [email protected]

PRI/88

BS EN 62305:—Protection against lightning

BS EN 62305-3:2006/Amendment 1Physical damage to structures and life hazard

This amendment to the standard, which will beavailable shortly, implements verbatimEN 62305-3:2006/A11:2009 which implementsEuropean requirements for NormativeReferences, Terms and Definitions, LightningProtection Systems and Dimensions.Contact: Keith StilesEmail: [email protected]

GEL/81

BS ISO 8528:—Reciprocating internal combustion enginedriven alternating current generating sets

BS ISO 8528-5:2005Generating sets

Following the recent systematic review of thisstandard, the secretary of ISO/TC 70 hasannounced that the decision of the committeeis to revise this standard. When work on thisbegins, an announcement will appear in the“New work started” section of this magazine.Contact: Committee Service CentreEmail: [email protected]

MCE/14/-/8

BS EN 1612:—Plastics and rubber machines. Reactionmoulding machines

BS EN 1612-2:2000+A1:2008Safety requirements for reaction mouldingplant


MCE/3/2

BS EN 1857:2003+A1:2008Chimneys. Components. Concrete flue liners


B/506


BS EN 1995:—Eurocode 5. Design of timber structures

BS EN 1995-1-1:2004+A1:2008General. Common rules and rules for buildings


B/525/5


BS EN 60335:—Household and similar electric appliances.Safety

BS EN 60335-2-82:2003+A1:2008Particular requirements for amusementmachines and personal service machines


CPL/61/01

BS EN 60404:—Magnetic materials

BS EN 60404-2:1998+A1:2008Methods of measurement of the magneticproperties of electrical steel strip and sheet bymeans of an Epstein frame


ISE/NFE/5

BS EN 61675:—Radionuclide imaging devices. Characteristicsand test conditions

BS EN 61675-1:1998+A1:2008Positron emission tomographs


CH/62/3

BS ISO 4309:2004+A1:2008Cranes. Wire ropes. Care, maintenance,installation, examination and discard


MHE/3/1

Updated British Standards continued...


BS 4346:—Joints and fittings for use with unplasticizedPVC pressure pipes

BS 4346-1:1969Injection moulded unplasticized PVC fittings forsolvent welding for use with pressure pipes,including potable water supply

PRI/88

This standard has been declared obsolescent as itapplies to pipework with a design life of 50 yearsand should therefore not yet be withdrawn. TheNational Forewords of BS EN 1452-1:2000,BS EN 1452-2:2000, BS EN 1452-3:2000,BS EN 1452-4:2000 and BS EN 1452-5:2000 docorrectly state that these will be made obsolescent(and not withdrawn)

BS 7291:—Thermoplastics pipes and associated fittings forhot and cold water for domestic purposes andheating installations in buildings

BS 7291-4:1990Specification for chlorinated polyvinyl chloride(PVC-C) pipes and associated fittings andsolvent cement

PRI/88

This standard was proposed for withdrawal in theSeptember 2008 edition of Update Standardsbecause following a systematic review carried outearlier in the year, the committee concluded thesepipes were no longer manufactured in the UK. It hassince been discovered that PVC-C is one of thematerials called up as suitable for condensatedrainage pipes in BS 6798 (section 4.3.3.1). As aresult, it has now been decided to declare thestandard as obsolescent

BS 9300 C199-276:1971Detail specification for silicon voltage-regulatordiodes

EPL/47

This standard has been declared obsolescent as it isno longer relevant

BS 9300 C377-378:1971Detail specifications for silicon coaxial mixerdiodes

EPL/47


BS 9300 C379-388:1971Detail specifications for silicon stud mounted,power rectifier diodes

EPL/47


BS 9300 C405-429:1971Detail specifications for silicon voltage-regulator diodes

EPL/47


BS 1659:1950Specification for tractive armature directcurrent neutral track and line relays for railwaysignalling

GEL/9

This standard has been declared obsolescent as newequipment is unlikely to be manufactured to thisstandard, but there is a great deal of equipment inaccordance still in service and which will require tobe supported for many years to come

BS 1745:1951Specification for alternating-current relays forrailway signalling: track relays (double-element,2-position), line relays (single-element, 2-position)

GEL/9


BS 1924:—Stabilized materials for civil engineeringpurposes

BS 1924-1:1990General requirements, sampling, samplepreparation and tests on materials beforestabilization

B/510

This standard has been declared obsolescent asthere are a number of references that will needupdating by the committee and sampling methodsand this cannot be done at present

BS 1924-2:1990Methods of test for cement-stabilized and lime-stabilized materials

B/510

This standard has been declared obsolescent asthere are a number of references that will needupdating by the committee and sampling methodsand this cannot be done at present

BS 2452:1954Specification for electrically driven jib cranesmounted on a high pedestal or portal carriage(high pedestal or portal jib cranes)

MHE/3/3

This standard has been declared obsolescent as it issuperseded by BS EN 14985:2007

BS 3505:1986Specification for unplasticized polyvinyl chloride(PVC-U) pressure pipes for cold potable water

PRI/88

This standard has been declared obsolescent as itapplies to pipework with a design life of 50 yearsand should therefore not yet be withdrawn. TheNational Forewords of BS EN 1452-1:2000,BS EN 1452-2:2000, BS EN 1452-3:2000,BS EN 1452-4:2000 and BS EN 1452-5:2000 docorrectly state that these will be made obsolescent(and not withdrawn)

BS EN 1116:2004Kitchen furniture. Co-ordinating sizes forkitchen furniture and kitchen appliances

FW/0

BS EN 10271:1999Electrolytically zinc-nickel (ZN) coated steel flatproducts. Technical delivery conditions

PRI/66

BS EN 13597:2003Railway applications. Rubber suspensioncomponents. Rubber diaphragms for pneumaticsuspension springs

RAE/3/-/4

BS EN 13721:2004Furniture. Assessment of the surface reflectance

FW/0/1

BS EN 13722:2004Furniture. Assessment of the surface gloss

FW/0/1

BS EN 14073:—Office furniture. Storage furniture

BS EN 14073-2:2004Safety requirements

FW/0

BS EN 14073-3:2004Test methods for the determination of stabilityand strength of the structure

FW/0

BS 3M 45:—Test methods for tyres

BS 3M 45-2:1998Aircraft tyres and rims

ACE/59

BRITISH STANDARDSDECLARED OBSOLESCENT

Declaration of obsolescence indicates thatthe standard is not recommended for usein new equipment but needs to beretained for the servicing of existingequipment that is expected to have along working life.

BS 581:1950Specification for electrically-driven point-operating machines for railways

GEL/9



BS 9364 N011:1978Detail specification for low power silicon p-n-pswitching transistors. 65 V, planar epitaxial,ambient rated, hermetic encapsulation. Full plusadditional assessment level

EPL/47


BS 9364 N012:1978Detail specification for low power silicon p-n-pswitching transistors. 65 V, planar epitaxial,ambient rated, hermetic encapsulation (longlead version). Full plus additional assessmentlevel

EPL/47


BS 9364 N013:1979Detail specification for low power silicon p-n-pswitching transistors. 25 V, planar epitaxial,ambient rated, hermetic encapsulation. Full plusadditional assessment level

EPL/47


BS 9364 N016:1979Detail specification for low power silicon n-p-nswitching transistors. 65 V, planar epitaxial,ambient rated, hermetic encapsulation. Full plusadditional assessment level

EPL/47


BS 9364 N017:1979Detail specification for low power silicon n-p-nswitching transistors. 65 V, planar epitaxial,ambient rated, hermetic encapsulation (longlead version). Full plus additional assessmentlevel

EPL/47


PD ES 59008:—Data requirements for semiconductor die

PD ES 59008-4:—Specific requirements and recommendations

PD ES 59008-4-1:2001Test and quality

EPL/47

This standard has been declared obsolescent as it isreplaced by the BS EN 62258 series

PD ES 59008-4-3:2000Thermal

EPL/47

This standard has been declared obsolescent as it isreplaced by BS EN 62258-6:2006

PD ES 59008-4-4:2000Electrical simulation

EPL/47

This standard has been declared obsolescent as it isreplaced by BS EN 62258-5:2006

BS 9300 C780-831:1971Detail specification for silicon voltage regulatordiodes

EPL/47



EPL/47


BS 9301 N002:1971Detail specification for general purpose siliconsignal diodes. 150 mA, 150 V, hermeticallysealed, glass encapsulation. General applicationcategory Q

EPL/47


BS 9305 N001:1972Detail specification for silicon voltage regulatordiodes. 1.5 W, 3.3 to 33 V (5%), hermeticallysealed. General application category Q

EPL/47


BS 9305 N041:1972Detail specification for silicon voltage regulatordiodes. 400 mW, 2.7 to 33 V (5%), hermeticallysealed, glass encapsulation. General applicationcategory Q

EPL/47


BS 9305 N042:1972Detail specification for silicon voltage regulatordiodes. 1.5 W, 6.8 to 200 V (5%), hermeticallysealed. General application category C

EPL/47


BS 9305 N044:1974Detail specification for silicon voltage regulatordiodes. 1.0 W, 3.3 to 33 V (5%), hermeticallysealed. Full assessment level

EPL/47


BS 9364 N007 and N009:1978Detail specification for low power silicon n-p-nswitching transistors. 20 V, planar epitaxial,ambient rated, hermetic encapsulation. Full plusadditional assessment level

EPL/47


BS 9364 N008 and N010:1978Detail specification for low power silicon n-p-nswitching transistors. 20 V, planar epitaxial,ambient rated, hermetic encapsulation (longlead version). Full plus additional assessmentlevel

EPL/47


BS 9300 C476:1973Detail specification for silicon avalancherectifier diode

EPL/47


BS 9300 C534:1971Detail specification for silicon coaxial resistiveswitching diode

EPL/47


BS 9300 C582-584:1971Detail specifications for reverse blocking triodethyristors

EPL/47


BS 9300 C599:1971Detail specification for silicon microwaveswitching diode, rod mounted

EPL/47


BS 9300 C667-668:1971Detail specification for silicon avalancherectifier diodes

EPL/47



EPL/47


BS 9300 C762:1971Detail specification for mixer diodes for use atX-band frequencies

EPL/47


BS 9300 C771-772:1971Detail specification for coaxial mixer diodes

EPL/47


BS 9300 C776-777:1971Detail specification for germanium coaxialmixer diodes

EPL/47


BS 9300 C778:1971Detail specification for a matched pair ofgermanium coaxial mixer diodes

EPL/47


British Standards Declared Obsolescent continued...


BS 6222:—Domestic kitchen equipment

BS 6222-5:1995Specification for strength requirements andmethods of test for peninsular units, islandunits and breakfast bars

FW/0

Superseded by BS 6222-2:2009

BS 7570:2000Code of practice for validation of arc weldingequipment

WEE/6

Superseded by BS EN 50504:2008

BS 8434:—Methods of test for assessment of the fireintegrity of electric cables

BS 8434-1:2003Test for unprotected small cables for use inemergency circuits. BS EN 50200 with additionof water spray

GEL/20/18

Superseded by BS EN 50200:2006

BS 9300:1969Specification for semiconductor devices ofassessed quality: generic data and methods oftest

EPL/47

Superseded by BS CECC 50000:1987

BS 9400:1970Specification for integrated electronic circuitsand micro-assemblies of assessed quality(qualification approval procedures): genericdata and methods of test

EPL/47

Superseded by BS CECC 90000:1985

BS 9430:1978Rules for the preparation of detail specificationsfor integrated circuits of assessed quality:voltage regulators. Full assessment level

EPL/47

This standard has been withdrawn as it is no longerused

BS 9490:1975Rules for the preparation of detail specificationsfor digital integrated circuits of assessedquality. Full assessment level

EPL/47


BS 9493:1981Rules for the preparation of detail specificationsfor integrated circuits of assessed quality whichperform mixed digital and/or analoguefunctions

EPL/47


BRITISH STANDARDSWITHDRAWN

If any standard in this list has beenamended since publication, allamendments published to date are alsowithdrawn

BS 903:—Physical testing of rubber

BS 903-A6:1992Method for determination of compression setat ambient, elevated or low temperatures

PRI/22

Superseded by BS ISO 815-1:2008

BS 3628:1963Specification for hose clips (worm drive type)for general purpose use

PSE/6

This standard has been withdrawn as it is no longerused in industry

BS 3934:—Mechanical standardization of semiconductordevices.

BS 3934-10:1992Schedule of UK national drawings givingdimensions

EPL/47

This standard has been withdrawn as it is no longerrelevant to UK industry

BS 4443:—Methods of test for flexible cellular materials

BS 4443-1:1988Method 4. Measurement of cell count

PRI/24

Superseded by BS EN ISO 1923:1995,BS EN ISO 845:1995, BS EN ISO 1856:1996,BS EN ISO 3386-1:1998, BS EN ISO 3386-2:1998,BS EN ISO 1798:2000 and BS EN 15702:2008

BS 5225:—Photometric data for luminaires

BS 5225-1:1975Photometric measurements

CPL/34/10

Superseded by BS EN 13032-1:2004

BS 5449:1990Specification for forced circulation hot watercentral heating systems for domestic premises

RHE/24

Superseded by BS EN 12828:2003, BS EN 12831:2003 and BS EN 14336:2004

PD ES 59008-5:—Particular requirements and recommendationsfor die types

PD ES 59008-5-1:2001Bare die

EPL/47


PD ES 59008-5-2:2001Bare die with added connection structures

EPL/47


PD ES 59008-5-3:2001Minimally-packaged die

EPL/47


PD ES 59008-6:—Exchange data formats and data dictionary

PD ES 59008-6-2:2001Data dictionary

EPL/47


BRITISH STANDARDSPROPOSED FORWITHDRAWAL

A note of any objections to thesewithdrawals should be sent to DebbieStead, Head of Committee Service Centre– Operations, BSI Head Office, 389Chiswick High Road, London W4 4AL orvia email [email protected] by30 April, 2009.

Where any standard in this list has beenamended since publication, a proposal towithdraw also includes all amendmentspublished to date.

BS 8208:—Guide to assessment of suitability of externalcavity walls for filling with thermal insulants

BS 8208-1:1985Existing traditional cavity construction

B/525/6

This standard has been proposed for withdrawal asit is no longer used


BRITISH STANDARDSUNDER REVIEW

The following British Standardsimplement International and/or EuropeanStandards which are currently underreview to see if they should be confirmed,revised or withdrawn.

Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL or via email [email protected] by30 April, 2009, in order to be consideredby the relevant UK Committee.

BS 949:—Screwing taps

BS 949-5:1990(EN 25967:1989, ISO 5967:1981)Nomenclature and terminology

MTE/5

BS 1127:—Screwing dies and dienuts

BS 1127-2:1990(EN 24230:1989, ISO 4230:1987)Specification for hand- and machine-operatedcircular screwing dies for taper pipe threads; Rseries

MTE/5

BS 1127-3:1990(EN 24231:1989, ISO 4231:1987)Specification for hand- and machine-operatedcircular screwing dies for parallel pipe threads;G series

MTE/5

BS 1660:—Machine tapers

BS 1660-5:1996(ISO 3936:1993)Specification for reduction sleeves with externaland internal 7/24 tapers

MTE/5

BS 1660-12:1996(ISO 5413:1993)Specification for positive drive of Morse tapers

MTE/5

BS 2782:—Methods of testing plastics. Mechanicalproperties

BS 2782-3:Method 352F:1996(ISO 7765-2:1994)Determination of impact resistance by the free-falling dart method (instrumented puncturetest)

PRI/75

BS EN 61058:—Switches for appliances

BS EN 61058-1:1992General requirements

EPL/23

Superseded by BS EN 61058-1:2002+A2:2008

BS EN 61158:—Digital data communications for measurementand control. Fieldbus for use in industrialcontrol systems

BS EN 61158-5:2004Application layer service definition

AMT/7

Superseded by BS EN 61158-5 Parts 2 to 5 and 7 to 20

BS EN 131800:1998Harmonized system of quality assessment forelectronic components. Sectional specification:fixed polypropylene film dielectric metal foilD.C. capacitors

EPL/40X


BS ISO 31:—Quantities and units

BS ISO 31-6:1992Light and related electromagnetic radiations

SS/7

Superseded by BS ISO 80000-7:2008

PD 6668:2000Managing risk for corporate governance

SVS/6

Superseded by BIP 2154:2008

PD 7639:—Short-circuit current calculation in three-phaseA.C. systems

PD 7639-2:1994Data for electrical equipment for short-circuitcurrent calculations in accordance with BS 7639

PEL/73

Superseded by PD IEC/TR 60909-2:2008

BS E9372:1976Specification for harmonized system of qualityassessment for electronic components. Blankdetail specification: ambient-rated bipolartransistors for low and high frequencyamplification

EPL/47


BS E9375:1975Specification. Harmonized system of qualityassessment for electronic components. Blankdetail specification: voltage regulator diodesand voltage reference diodes excludingprecision-voltage temperature-compensatedreference diodes

EPL/47


BS EN ISO 10058:1996Magnesites and dolomites. Chemical analysis

RPI/1

Superseded by BS EN ISO 10058-1:2008,BS EN ISO 10058-2:2008 and BS EN ISO 10058-3:2008

BS EN 13510:2000(BS 6912-14:2000)Earth-moving machinery. Roll-over protectivestructures. Laboratory tests and performancerequirements

B/513/1

Superseded by BS EN ISO 3471:2008

BS EN 60068:—Environmental testing

BS EN 60068-2-32:1993Tests. Test Ec. Rough handling shocks, primarilyfor equipment-type specimens

GEL/104

Superseded by BS EN 60068-2-31:2008

BS EN 60335:—Household and similar electrical appliances.Safety

BS EN 60335-2-90:2002Particular requirements for commercialmicrowave ovens

CPL/61/07


BS EN 60704:—Test code for the determination of airborneacoustical noise emitted by household andsimilar electrical appliances

BS EN 60704-3:1995Procedure for determining and verifyingdeclared noise emission values

CPL/59


BS EN 60730:—Specification for automatic electrical controlsfor household and similar use

BS EN 60730-2-1:1997Particular requirements. Electrical controls forelectrical household appliances

CPL/72


BS EN 61000:—Electromagnetic compatibility (EMC)

BS EN 61000-4-3:2002Testing and measurement techniques. Radiated,radio-frequency, electromagnetic fieldimmunity test

GEL/210/12

Superseded by BS EN 61000-4-3:2006+A1:2008

British Standards Withdrawn continued...


BS EN ISO 105-G03:1997Colour fastness to ozone in the atmosphere

TCI/81

BS EN ISO 105-N02:1995Colour fastness to bleaching: Peroxide

TCI/81

BS EN ISO 105-N03:1995Colour fastness to bleaching: Sodium chlorite(mild)

TCI/81

BS EN ISO 105-N04:1995Colour fastness to bleaching: Sodium chlorite(severe)

TCI/81

BS EN ISO 105-N05:1995Colour fastness to stoving

TCI/81

BS EN ISO 105-P01:1995Colour fastness to dry heat (excluding pressing)

TCI/81

BS EN ISO 105-S01:1996Colour fastness to vulcanization. Hot air

TCI/81

BS EN ISO 105-S02:1996Colour fastness to vulcanization: Sulfurmonochloride

TCI/81

BS EN ISO 105-S03:1996Colour fastness to vulcanization. Open steam

TCI/81

BS EN ISO 105-X01:1996Colour fastness to carbonizing: Aluminiumchloride

TCI/81

BS EN ISO 105-X02:1996Colour fastness to carbonizing: Sulfuric acid

TCI/81

BS EN ISO 105-X09:1996Colour fastness to formaldehyde

TCI/81

BS EN ISO 105-X10:1996Assessment of migration of textile colours intopolyvinyl chloride coatings

TCI/81

BS EN ISO 105-Z01:1996Colour fastness to metals in the dye-bath:chromium salts

TCI/81

BS 6057:—Rubber latices

BS 6057-3:—Methods of test

BS 6057-3.7:1995(ISO 705:1994)Determination of density of natural rubberlatices

PRI/50

BS 6057-3.19:1986(ISO 4655:1985)Determination of total bound styrene contentof reinforced styrene-butadiene rubber latices

PRI/50

BS 6057-3.23:1990(ISO 9252:1989)Microbiological examination of synthetic rubberlatex

PRI/50

BS 6148:—Methods of test for commercial refrigeratedcabinets

BS 6148-8:1981(ISO 1992-VIII:1978)Test for accidental mechanical contact

RHE/19

BS 7275:—Determination of hydraulic fluid power motorcharacteristics

BS 7275-3:1995(ISO 4392-3:1993)Method at constant flow and at constanttorque

MCE/18

BS EN ISO 105:—Textiles. Tests for colour fastness

BS EN ISO 105-B05:1996Detection and assessment of photochromism

TCI/81

BS EN ISO 105-B06:2004Colour fastness and ageing to artificial light athigh temperatures: Xenon arc fading lamp test

TCI/81

BS EN ISO 105-D02:1996Colour fastness to rubbing: Organic solvents

TCI/81

BS 2782-6:Method 630A:1994(ISO 4593:1993)Determination of thickness by mechanicalscanning of flexible sheet

PRI/75

BS 3087:—Pliers and nippers

BS 3087-12:1991(ISO 9242:1988)Specification for dimensions and test values ofconstruction worker’s pincers

MTE/15

BS 3087-13:1991(ISO 9243:1988)Specification for dimensions and test values ofcarpenter’s pincers

MTE/15

BS 4062:—Valves for hydraulic fluid power systems

BS 4062-2:1990(ISO 6403:1988)Methods for determining performance

MCE/18

BS 4140:—Methods of test for aluminium oxide

BS 4140-1:1986(ISO 802:1976)Preparation and storage of test samples

CII/24

BS 4140-10:1986(ISO 903:1976)Determination of untamped density

CII/24

BS 5293:—Sampling and testing carbon black for use inthe rubber industry

BS 5293-7:2001(ISO 1125:1999)Method for determination of ash content

PRI/50

BS 5293-11:1995(ISO 4652-1:1994)Method for determination of specific surfacearea by nitrogen adsorption methods usingsingle-point procedures

PRI/50

BS 5341:—Piston rings up to 200 mm diameter forreciprocating internal combustion engines

BS 5341-7.4:1992(ISO 6625:1986)Designs, dimensions and designations for singlepiece rings. Specification for oil control rings

MCE/14


BS EN ISO 5470:—Rubber- or plastics-coated fabrics.Determination of abrasion resistance

BS EN ISO 5470-1:1999Taber abrader

TCI/69

BS EN ISO 6149:—Connections for hydraulic fluid power andgeneral use. Ports and stud ends with ISO 261metric threads and O-ring sealing

BS EN ISO 6149-1:2007Ports with truncated housing for O-ring seal

MCE/18/-/4

BS EN ISO 6149-2:2007Dimensions, design, test methods andrequirements for heavy-duty (S series) stud ends

MCE/18/-/4

BS EN ISO 6149-3:2007Dimensions, design, test methods andrequirements for light-duty (L series) stud ends

MCE/18/-/4

BS EN ISO 6383:—Plastics. Film and sheeting. Determination oftear resistance

BS EN ISO 6383-1:2004Trouser tear method

PRI/75

BS EN ISO 6383-2:2004Elmendorf method

PRI/75

BS EN ISO 6878:2004(BS 6068-2.28:2004)Water quality. Determination of phosphorus.Ammonium molybdate spectrometric method

EH/3/2

BS EN ISO 6885:2007Animal and vegetable fats and oils.Determination of anisidine value

AW/307

BS EN ISO 7369:2004Pipework. Metal hoses and hose assemblies.Vocabulary

PSE/12

BS EN ISO 7391:—Plastics. Polycarbonate (PC) moulding andextrusion materials

BS EN ISO 7391-1:2006Designation system and basis for specifications

PRI/82

BS EN ISO 2419:2006Leather. Physical and mechanical tests. Samplepreparation and conditioning

TCI/69

BS EN ISO 3385:1995Flexible cellular polymeric materials.Determination of fatigue by constant-loadpounding

PRI/24

BS EN ISO 4098:2006Leather. Chemical tests. Determination ofwater-soluble matter, water-soluble inorganicmatter and water-soluble organic matter

TCI/69

BS EN ISO 4167:2006Polyolefin agricultural twines

TCI/77

BS EN ISO 4263:—Petroleum and related products. Determinationof the ageing behaviour of inhibited oils andfluids. TOST test

BS EN ISO 4263-3:2006Anhydrous procedure for synthetic hydraulicfluids

MCE/18/-/16

BS EN ISO 4375:2004Hydrometric determinations. Cableway systemsfor stream gauging

CPI/113

BS EN ISO 4612:1999Plastics. Preparation of PVC pastes for testpurposes. Planetary-mixer method

PRI/82

BS EN ISO 4613:—Plastics. Ethylene/vinyl acetate (E/VAC)moulding and extrusion materials

BS EN ISO 4613-1:1999Designation and specification

PRI/82

BS EN ISO 5263:—Pulps. Laboratory wet disintegration

BS EN ISO 5263-1:2004Disintegration of chemical pulps

PAI/11

BS EN ISO 5263-2:2004Disintegration of mechanical pulps at 20°C

PAI/11

BS EN ISO 5269:—Pulps. Preparation of laboratory sheets forphysical testing

BS EN ISO 5269-2:2004Rapid-Koethen method

PAI/11

BS EN ISO 105-Z02:1996Colour fastness to metals in the dye-bath. Ironand copper

TCI/81

BS EN ISO 105-Z06:2000Evaluation of dye and pigment migration

TCI/81

BS EN ISO 105-Z11:2001Evaluation of speckiness of colorant dispersions

TCI/81

BS EN ISO 662:2001(BS 684-1.10:1998)Animal and vegetable fats and oils.Determination of moisture and volatile mattercontent

AW/307

BS EN ISO 1167:—Thermoplastics pipes, fittings and assemblies forthe conveyance of fluids. Determination of theresistance to internal pressure

BS EN ISO 1167-1:2006General method

PRI/88/4

BS EN ISO 1167-2:2006Preparation of pipe test pieces

PRI/88/4

BS EN ISO 1269:2006Plastics. Homopolymer and copolymer resins ofvinyl chloride. Determination of volatile matter(including water)

PRI/82

BS EN ISO 1622:—Plastics. Polystrene (PS) moulding and extrusionmaterials


PRI/82

BS EN 1765:2004Rubber hose assemblies for oil suction anddischarge services. Specification for theassemblies

PRI/66

BS EN ISO 1872:—Polyethylene (PE) moulding and extrusionmaterials


PRI/82

BS EN ISO 2231:1995(BS 3424-2:1992)Rubber- or plastics-coated fabrics. Standardatmospheres for conditioning and testing

TCI/69

British Standards Under Review continued...


BS EN 12484-4:2002Installation and acceptance

AGE/30

BS EN 12484-5:2002Testing methods of systems

AGE/30

BS EN 12734:2000Irrigation techniques. Quick coupling pipes formovable irrigation supply. Technicalcharacteristics and testing

AGE/30

BS EN ISO 13625:2002Petroleum and natural gas industries. Drillingand production equipment. Marine drilling risercouplings

PSE/17/-/4

BS EN ISO 13631:2002Petroleum and natural gas industries. Packagedreciprocating gas compressors

MCE/8

BS EN 13997:2003Irrigation techniques. Connection and controlaccessories for use in irrigation systems.Technical characteristics and testing

AGE/30

BS EN ISO 14373:2007Resistance welding. Procedure for spot weldingof uncoated and coated low carbon steels

WEE/29

BS EN 14407:2004(BS 6068-5.35:2004)Water quality. Guidance standard for theidentification, enumeration and interpretationof benthic diatom samples from running waters

EH/3/5

BS EN 14420:—Hose fittings with clamp units

BS EN 14420-1:2004Requirements, survey, designation and testing

PRI/66

BS EN 14420-4:2004Flange connections

PRI/66

BS EN 14420-6:2004TW tank truck couplings

PRI/66

DD CEN/TS 14421:2006Hose tail and ferrule for crimping and swaging

PRI/66

BS EN 14422:2004Clamp type coupling assemblies for LPG transferhoses

PRI/66

BS EN ISO 10432:2004Petroleum and natural gas industries.Downhole equipment. Subsurface safety valveequipment

PSE/17/-/4

BS EN ISO 10447:2007Resistance welding. Peel and chisel testing ofresistance spot and projection welds

WEE/29

BS EN ISO 11608:—Pen-injectors for medical use

BS EN ISO 11608-4:2007Requirements and test methods for electronicand electromechanical pen-injectors

CH/84

BS EN ISO 12086:—Plastics. Fluoropolymer dispersions andmoulding and extrusion materials


PRI/82

BS EN ISO 12086-2:2006Preparation of test specimens anddetermination of properties

PRI/82

BS EN ISO 12156:—Diesel fuel. Assessment of lubricity using thehigh-frequency reciprocating rig (HFRR)

BS EN ISO 12156-1:2006Test method

MCE/22

BS EN ISO 12228:1999(BS 684-2.38:1999)Animal and vegetable fats and oils.Determination of individual and total sterolscontents. Gas chromatographic method

AW/307

BS EN 12484:—Irrigation techniques. Automatic turf irrigationsystems

BS EN 12484-1:1999Definition of the programme of equipment bythe owner

AGE/30

BS EN 12484-2:2000Design and definition of typical technicaltemplates

AGE/30

BS EN 12484-3:2000Automatic control and system management

AGE/30


PRI/82

BS EN ISO 7765:—Plastics film and sheeting. Determination ofimpact resistance by the free-falling dartmethod

BS EN ISO 7765-1:2004Staircase methods

PRI/75

BS EN ISO 9936:2006Animal and vegetable fats and oils.Determination of tocopherol and tocotrienolcontents by high-performance liquidchromatography

AW/307

BS EN ISO 10308:2006Metallic coatings. Review of porosity tests

STI/33

BS EN ISO 10417:2004Petroleum and natural gas industries.Subsurface safety valve systems. Design,installation, operation and redress

PSE/17/-/4

BS EN ISO 10424:—Petroleum and natural gas industries. Rotarydrilling equipment

BS EN ISO 10424-1:2004Rotary drill stem elements

PSE/17/-/4

BS EN ISO 10426:—Petroleum and natural gas industries. Cementsand materials for well cementing

BS EN ISO 10426-3:2004Testing of deepwater well cement formulations

PSE/17/-/3

BS EN ISO 10426-4:2004Preparation and testing of foamed cementslurries at atmospheric pressure

PSE/17/-/3

BS EN ISO 10427:—Petroleum and natural gas industries.Equipment for well cementing

BS EN ISO 10427-2:2004Centralizer placement and stop-collar testing

PSE/17/-/3

BS EN ISO 10427-3:2004Performance testing of cementing floatequipment

PSE/17/-/3


BS EN 20105-A03:1995(ISO 105-A03:1993)Grey scale for assessing staining

TCI/81

BS EN 20105-N01:1995(ISO 105-N01:1993)Colour fastness to bleaching: hypochlorite

TCI/81

BS EN ISO 21171:2006Medical gloves. Determination of removablesurface powder

CH/205/3

BS EN ISO 21329:2004Petroleum and natural gas industries. Pipelinetransportation systems. Test procedures formechanical connectors

PSE/17/2

BS EN ISO 24276:2006Foodstuffs. Methods of analysis for thedetection of genetically modified organismsand derived products. General requirementsand definitions

AW/-/3

BS EN 29367:—Lashing and securing arrangements on roadvehicles for sea transportation on Ro/Ro ships.General requirements

BS EN 29367-1:1994(ISO 9367-1:1989)Commercial vehicles and combinations ofvehicles, semi-trailers excluded

AUE/13

BS EN 29367-2:1995(ISO 9367-2:1994)Semi-trailers

AUE/13

PD ISO/TR 210:1999Essential oils. General rules for packaging,conditioning and storage

AW/54

PD ISO/TR 211:1999Essential oils. General rules for labelling andmarking of containers

AW/54

BS ISO 247:2006Rubber. Determination of ash

PRI/23

BS ISO 363:—Textile machinery and accessories. Flat steelhealds with closed end loops

BS ISO 363-1:2006Dimensions of healds manufactured of rolledsteel wire

TCI/33

DD CEN ISO/TS 15875:—Plastics piping systems for hot and cold waterinstallations. Crosslinked polyethylene (PE-X)

DD CEN ISO/TS 15875-7:2003Guidance for the assessment of conformity

PRI/88/2

DD CEN ISO/TS 15876:—Plastics piping systems for hot and cold waterinstallations. Polybutylene (PB)


PRI/88/2

BS EN ISO 16264:2004(BS 6068-2.78:2002)Water quality. Determination of soluble silicatesby flow analysis (FIA and CFA) and photometricdetection

EH/3/2

BS EN ISO 16432:2007Resistance welding. Procedure for projectionwelding of uncoated and coated low carbonsteels using embossed projection(s)

WEE/29

BS EN ISO 16433:2007Resistance welding. Procedure for seam weldingof uncoated and coated low carbon steels

WEE/29

BS EN ISO 17078:—Petroleum and natural gas industries. Drillingand production equipment

BS EN ISO 17078-1:2004Side-pocket mandrels

PSE/17/-/4

BS EN ISO 17294:—Water quality. Application of inductivelycoupled plasma mass spectrometry (ICP-MS)

BS EN ISO 17294-2:2004(BS 6068-2.89:2004)Determination of 62 elements

EH/3/2

BS EN ISO 17994:2004(BS 6068-4.19:2004)Water quality. Criteria for establishingequivalence between microbiological methods

EH/3/4

BS EN 20105:—Textiles. Tests for colour fastness

BS EN 20105-A02:1995(ISO 105-A02:1993)Grey scale for assessing change in colour

TCI/81

BS EN 14423:2004Clamp type coupling assemblies for use withsteam hoses rated for pressures up to 18 bar

PRI/66

BS EN 14424:2004Hose fittings with screwed ferrules

PRI/66/1

BS EN 14614:2004(BS 6068-5.36:2004)Water quality. Guidance standard for assessingthe hydromorphological features of rivers

EH/3/5

BS EN ISO 14631:1999Extruded sheets of impact-modified polystyrene(PS-I). Requirements and test methods

PRI/75

BS EN ISO 14663:—Plastics. Ethylene/vinyl alcohol (EVOH)copolymer moulding and extrusion materials


PRI/82


PRI/82

BS EN ISO 15465:2004Pipework. Stripwound metal hoses and hoseassemblies

PSE/12

BS EN ISO 15753:2006Animal and vegetable fats and oils.Determination of polycyclic aromatichydrocarbons

AW/307

BS EN ISO 15788:—Animal and vegetable fats and oils.Determination of stigmastadienes in vegetableoils

BS EN ISO 15788-1:2001(BS 684-2.49:2000)Method using capillary-column gaschromatography (Reference method)

AW/307

DD CEN ISO/TS 15874:—Plastics piping systems for hot and cold waterinstallations. Polypropylene (PP)


PRI/88/2



BS ISO 2475:1999Chloroprene rubber (CR). General-purposetypes. Evaluation procedure

PRI/50

BS ISO 2561:2006Plastics. Determination of residual styrenemonomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gaschromatography

PRI/82

BS ISO 2697:1999Diesel engines. Fuel nozzles. Size “S”

MCE/22

BS ISO 2705:2006Road vehicles. M12 x 1,25 spark plugs with flatseating and their cylinder head housings

MCE/9

BS ISO 2943:1998Hydraulic fluid power. Filter elements.Verification of material compatibility with fluids

MCE/18

BS ISO 3366:1999Coated abrasives. Abrasive rolls

MTE/13

BS ISO 3534:—Statistics. Vocabulary and symbols

BS ISO 3534-1:2006General statistical terms and terms used inprobability

SS/1

BS ISO 3534-2:2006Applied statistics

SS/1

BS ISO 3842:2006Road vehicles. Fifth wheels. Interchangeability

AUE/13

BS ISO 3888:—Passenger cars. Test track for a severe lane-change manoeuvre

BS ISO 3888-1:1999Double-lane change

AUE/15

BS ISO 3976:2006Milk fat. Determination of peroxide value

AW/5

BS ISO 4093:1999Diesel engines. Fuel injection pumps. High-pressure pipes for testing

MCE/22

BS ISO 603-11:1999Hand finishing sticks

MTE/13

BS ISO 603-12:1999Grinding wheels for deburring and fettling on astraight grinder

MTE/13

BS ISO 603-13:1999Grinding wheels for deburring and fettling on avertical grinder

MTE/13

BS ISO 603-14:1999Grinding wheels for deburring andfettling/snagging on an angle grinder

MTE/13

BS ISO 603-15:1999Grinding wheels for cutting-off on stationary ormobile cutting-off machines

MTE/13

BS ISO 603-16:1999Grinding wheels for cutting-off on hand-heldpower tools

MTE/13

BS ISO 1085:1999Assembly tools for screws and nuts. Double-ended wrenches. Size pairing

MTE/15

BS ISO 1126:2006Rubber compounding ingredients. Carbonblack. Determination of loss on heating

PRI/50

BS ISO 1304:2006Rubber compounding ingredients. Carbonblack. Determination of iodine adsorptionnumber

PRI/50

BS ISO 1409:2006Plastics/rubber. Polymer dispersions and rubberlatices (natural and synthetic). Determination ofsurface tension by the ring method

PRI/50

BS ISO 1434:1995Natural rubber in bales. Amount of balecoating. Determination

PRI/50

BS ISO 1540:2006Aerospace. Characteristics of aircraft electricalsystems

ACE/6

BS ISO 2028:1999Synthetic rubber latex. Preparation of drypolymer

PRI/50

BS ISO 363-2:2006Dimensions of healds manufactured ofhardened strip steel

TCI/33

BS ISO 368:2006Spinning preparatory, spinning and doubling(twisting) machinery. Tubes for ring-spinning,doubling and twisting spindles, taper 1:38 and 1:64

TCI/33

BS ISO 525:1999Bonded abrasive products. Generalrequirements

MTE/13

BS ISO 603:—Bonded abrasive products. Dimensions

BS ISO 603-1:1999Grinding wheels for external cylindricalgrinding between centres

MTE/13

BS ISO 603-2:1999Grinding wheels for centreless externalcylindrical grinding

MTE/13

BS ISO 603-3:1999Grinding wheels for internal cylindrical grinding

MTE/13

BS ISO 603-4:1999Grinding wheels for surface grinding/peripheralgrinding

MTE/13

BS ISO 603-5:1999Grinding wheels for surface grinding/facegrinding

MTE/13

BS ISO 603-6:1999Grinding wheels for tool and toolroom grinding

MTE/13

BS ISO 603-7:1999Grinding wheels for manually guided grinding

MTE/13

BS ISO 603-8:1999Grinding wheels for deburring andfettling/snagging

MTE/13

BS ISO 603-9:1999Grinding wheels for high pressure grinding

MTE/13

BS ISO 603-10:1999Stones for honing and superfinishing

MTE/13


BS ISO 8332:2006Rubber compounding ingredients. Sulfur.Methods of test

PRI/23

BS ISO 8470:2006Road vehicles M14 x 1,25 spark-plugs with flatseating and 16 mm hexagon and their cylinderhead housings

MCE/9

BS ISO 8535:—Diesel engines. Steel tubes for high-pressurefuel injection pipes

BS ISO 8535-1:2006Requirements for seamless cold-drawn single-wall tubes

MCE/22

BS ISO 9028:2006Rubber. Dissolution by acid digestion

PRI/23

BS ISO 9128:2006Road vehicles. Graphical symbols to designatebrake fluid types

PRI/69

BS ISO 9136:—Abrasive grains. Determination of bulk density

BS ISO 9136-2:2000Microgrits

MTE/13

BS ISO 9628:2006Rolling bearings. Insert bearings and eccentriclocking collars. Boundary dimensions andtolerances

MCE/7

BS ISO 9816:2006Passenger cars. Power-off reaction of a vehiclein a turn. Open-loop test method

AUE/15

BS ISO 9844:2006Oil of bitter orange (Citrus aurantium L.)

AW/54

BS ISO 9874:2006Milk. Determination of total phosphoruscontent. Method using molecular absorptionspectrometry

AW/5

BS ISO 10129:2006Plain bearings. Testing of bearing materials.Resistance to corrosion by lubricants understatic conditions

MCE/12

BS ISO 10368:2006Freight thermal containers. Remote conditionmonitoring

TW/1

BS ISO 6118:2006Road vehicles. Elastomeric cups and seals forcylinders for hydraulic braking systems using anon-petroleum base hydraulic brake fluid(service temperature 70°C max.)

PRI/69

BS ISO 6446:1994Rubber products. Bridge bearings. Specificationfor rubber materials

PRI/73

BS ISO 6886:2006Animal and vegetable fats and oils.Determination of oxidative stability (acceleratedoxidation test)

AW/307

BS ISO 6967:2006Aircraft ground equipment. Main deckcontainer/pallet loader. Functionalrequirements

ACE/57

BS ISO 7975:2006Passenger cars. Braking in a turn. Open-looptest method

AUE/15

BS ISO 8083:2006Machinery for forestry. Falling-object protectivestructures (FOPS). Laboratory tests andperformance requirements

AGE/29

BS ISO 8118:—Textile machinery. Weaving machine temples

BS ISO 8118-1:2006Temple cylinders

TCI/33

BS ISO 8118-2:2006Full-width temples

TCI/33

BS ISO 8132:2006Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar)series. Mounting dimensions for accessories

MCE/18/-/3

BS ISO 8178:—Reciprocating internal combustion engines.Exhaust emission measurement

BS ISO 8178-11:2006Test-bed measurement of gaseous andparticulate exhaust emissions from engines usedin nonroad mobile machinery under transienttest conditions

MCE/14/-/3

BS ISO 8312:1999Rubber compounding ingredients. Stearic acid.Definition and test methods

PRI/50

BS ISO 4658:1999Acrylonitrile-butadiene rubber (NBR).Evaluation procedure

PRI/50

BS ISO 4660:1999Rubber, raw natural. Colour index test

PRI/50

BS ISO 4688:—Iron ores. Determination of aluminium

BS ISO 4688-1:2006Flame atomic absorption spectrometric method

ISE/58

BS ISO 4926:2006Road vehicles. Hydraulic braking systems. Non-petroleum-base reference fluids

PRI/69

BS ISO 4928:2006Road vehicles. Elastomeric cups and seals forcylinders for hydraulic braking systems using anon-petroleum base hydraulic brake fluid(Service temperature 120°C max.)

PRI/69

BS ISO 4930:2006Road vehicles. Elastomeric seals for hydraulicdisc brake cylinders using a non-petroleum basehydraulic brake fluid (service temperature 150°Cmax.)

PRI/69

BS ISO 4992:—Steel castings. Ultrasonic examination

BS ISO 4992-1:2006Steel castings for general purposes

ISE/6

BS ISO 4992-2:2006Steel castings for highly stressed components

ISE/6

BS ISO 6020:—Hydraulic fluid power. Mounting dimensions forsingle rod cylinders, 16 MPa (160 bar) series

BS ISO 6020-2:2006Compact series

MCE/18/-/3

BS ISO 6022:2006Hydraulic fluid power. Mounting dimensions forsingle rod cylinders, 25 MPa (250 bar) series

MCE/18/-/3

BS ISO 6101:—Rubber. Determination of metal content byatomic absorption spectrometry

BS ISO 6101-5:2006Determination of iron content

PRI/23



BS ISO 15037:—Road vehicles. Vehicle dynamics test methods

BS ISO 15037-1:2006General conditions for passenger cars

AUE/15

BS ISO 15242:—Rolling bearings. Measuring methods forvibration

BS ISO 15242-3:2006Radial spherical and tapered roller bearingswith cylindrical bore and outside surface

MCE/7

BS ISO 15585:2006Hard coal. Determination of caking index

PTI/16

BS ISO 15995:2006Gas cylinders. Specification and testing of LPGcylinder valves. Manually operated

PVE/19

BS ISO 16134:2006Earthquake- and subsidence-resistant design ofductile iron pipelines

PSE/10

BS ISO 16149:2006Agricultural irrigation equipment. PVC above-ground low-pressure pipe for surface irrigation.Specifications and test methods

AGE/30

BS ISO 16234:2006Heavy commercial vehicles and buses. Straight-ahead braking on surfaces with split coefficientof friction. Open-loop test method

AUE/15

PD ISO/TR 16806:2003Pneumatic fluid power. Cylinders. Load capacityof pneumatic slides and their presentationmethod

MCE/18/-/3

BS ISO 17087:2006Specifications for adhesives used for fingerjoints in non-structural lumber products

PRI/52

BS ISO 17499:2006Carbonaceous materials used in the productionof aluminium. Determination of baking levelexpressed by equivalent temperature

CII/24

BS ISO 17500:2006Aluminium oxide used for the production ofprimary aluminium. Determination of attritionindex

CII/24

BS ISO 13674:—Road vehicles. Test method for thequantification of on-centre handling

BS ISO 13674-2:2006Transition test

AUE/15

BS ISO 13990:—Textile machinery and accessories. Yarn feedersand yarn control for knitting machines

BS ISO 13990-1:2006Vocabulary

TCI/33

BS ISO 13990-2:2006Connecting dimensions for yarn feeders andyarn control devices

TCI/33

BS ISO 13990-3:2006Dimensions for connecting and interconnectioncables

TCI/33

BS ISO 14245:2006Gas cylinders. Specification and testing of LPGcylinder valves. Self-closing

PVE/19

BS ISO 14508:2006Road vehicles. Spark plugs. Terminals

MCE/9

BS ISO 14512:1999Passenger cars. Straight-ahead braking onsurfaces with split coefficient of friction. Open-loop test method

AUE/15

BS ISO 14513:2006Road vehicles. Pedestrian protection. Headimpact test method

AUE/15

BS ISO 14531:—Plastics pipes and fittings. Crosslinkedpolyethylene (PE-X) pipe systems for theconveyance of gaseous fuels. Metric series.Specifications

BS ISO 14531-3:2006Fittings for mechanical jointing (including PE-X/metal transitions)

PRI/88/2/P6

BS ISO 15003:2006Agricultural engineering. Electrical andelectronic equipment. Testing resistance toenvironmental conditions

AGE/6

BS ISO 10521:—Road vehicles. Road load

BS ISO 10521-1:2006Determination under reference atmosphericconditions

MCE/22

BS ISO 10521-2:2006Reproduction on chassis dynamometer

MCE/22

BS ISO 10770:—Hydraulic fluid power. Electrically modulatedhydraulic control valves

BS ISO 10770-2:1998Test methods for three-way directional flowcontrol valves

MCE/18

DD ISO/PAS 11154:2006Road vehicles. Roof load carriers

AUE/9

BS ISO 11235:1999Rubber compounding ingredients. Sulfenamideaccelerators. Test methods

PRI/50

BS ISO 11565:2006Road vehicles. Spark-plugs. Test methods andrequirements

MCE/9

BS ISO 11614:1999Reciprocating internal combustion compression-ignition engines. Apparatus for measurementof the opacity and for determination of thelight absorption coefficient of exhaust gas

MCE/22

BS ISO 11783:—Tractors and machinery for agriculture andforestry. Serial control and communicationsdata network

BS ISO 11783-8:2006Power train messages

AGE/6

BS ISO 12078:2006Anhydrous milk fat. Determination of sterolcomposition by gas liquid chromatography(Reference method)

AW/5

BS ISO 13292:2006Copper, lead, zinc and nickel concentrates.Experimental methods for checking the bias ofsampling

NFE/36


BS ISO 23273-3:2006Protection of persons against electric shock

PEL/69

BS ISO 23275:—Animal and vegetable fats and oils. Cocoabutter equivalents in cocoa butter and plainchocolate

BS ISO 23275-1:2006Determination of the presence of cocoa butterequivalents

AW/307

BS ISO 23275-2:2006Quantification of cocoa butter equivalents

AW/307

BS ISO 23933:2006Aerospace series. Aramid reinforced lightweightpolytetrafluoroethylene (PTFE) hose assemblies,classification 135°C/20 684 kPa (275°F/3 000 psi)and 135°C/21 000 kPa (275°F/3 046 psi).Procurement specification

ACE/69

BS ISO 24134:2006Industrial trucks. Additional requirements forautomated functions on trucks

MHE/7

BS ISO 24335:2006Laminate floor coverings. Determination ofimpact resistance

PRI/60

BS ISO 24338:2006Laminate floor coverings. Determination ofabrasion resistance

PRI/60

BS ISO 24340:2006Resilient floor coverings. Determination ofthickness of layers

PRI/60

BS ISO 24341:2006Resilient and textile floor coverings.Determination of length, width andstraightness of sheet

PRI/60

BS AU 262:—Road vehicles. Sheath-type glow-plugs withconical seating and their cylinder head housing

BS AU 262-1:1995(ISO 6550-1:1994)M14 x 1, 25 glow-plugs

MCE/9

BS AU 262-2:1995(ISO 6550-2:1994)M12 x 1.25 glow-plugs

MCE/9

BS ISO 21308:—Road vehicles. Product data exchange betweenchassis and bodywork manufacturers (BEP)

BS ISO 21308-2:2006Dimensional bodywork exchange parameters

AUE/9

BS ISO 21869:2006Rubber compounding ingredients. Magnesiumoxide. Methods of test

PRI/23

BS ISO 22168:2006Road vehicles. Holding test of coatingsinfluencing the colour of light emitted by lightsources). Test methods

AUE/1

BS ISO 22241:—Diesel engines. NOx reduction agent AUS 32

BS ISO 22241-1:2006Quality requirements

MCE/22

BS ISO 22241-2:2006Test methods

MCE/22

BS ISO 22369:—Crop protection equipment. Drift classificationof spraying equipment

BS ISO 22369-1:2006Classes

AGE/15

BS ISO 22768:2006Rubber, raw. Determination of the glasstransition temperature by differential scanningcalorimetry (DSC)

PRI/23

BS ISO 23273:—Fuel cell road vehicles. Safety specifications

BS ISO 23273-1:2006Vehicle functional safety

PEL/69

BS ISO 23273-2:2006Protection against hydrogen hazards forvehicles fuelled with compressed hydrogen

PEL/69

BS ISO 18207:2006Road vehicles. Trailers up to 3,5 t. Control ofwelded towing brackets for coupling ball afterfatigue testing

AUE/8

BS ISO 18252:2006Anhydrous milk fat. Determination of sterolcomposition by gas liquid chromatography(Routine method)

AW/5

BS ISO 18898:2006Rubber. Calibration and verification of hardnesstesters

PRI/20

BS ISO 19212:2006Adhesives. Determination of temperaturedependence of shear strength

PRI/52

BS ISO 19472:2006Machinery for forestry. Winches. Dimensions,performance and safety

AGE/29

BS ISO 19812:2006Road vehicles. M10 x 1 compact spark-plugswith flat seating and 16 mm hexagon and theircylinder head housings

MCE/9

BS ISO 19813:2006Road vehicles. Ignition systems. Test methodsand requirements for high voltage boots onplug-top coils and pencil coils

MCE/9

BS ISO 19932:—Equipment for crop protection. Knapsacksprayers

BS ISO 19932-1:2006Requirements and test methods

AGE/15

BS ISO 19932-2:2006Performance limits

AGE/15

BS ISO 20299:—Film for wrapping rubber bales

BS ISO 20299-1:2006Butadiene rubber (BR) and styrene-butadienerubber (SBR)

PRI/50

BS ISO 20826:2006Automotive LPG components. Containers

PVE/19



DD CEN/TS WI 00260091Fertilizers. Extraction of total sulfur present invarious forms (Method 8.2)

CII/37

DD CEN/TS WI 00260093Fertilizers. Extraction of water soluble sulfurwhere the sulfur is in various forms (Method 8.4)

CII/37

BS EN WI 00260113Fertilizers. Determination of the fineness ofgrinding (dry procedure) (Method 7.1)

CII/37

BS EN WI 00383006:—Sustainably produced biomass for energyapplications

BS EN WI 00383006-6Conformity assessment

PTI/20/-/5

BS EN 175 (Revision)Personal protection. Equipment for eye andface protection during welding and alliedprocesses

will supersede BS EN 175:1997

PH/2

BS EN ISO 204Metallic materials. Uniaxial creep testing intension. Method of test

ISE/NFE/4

BS EN ISO 286:—Geometrical product specifications (GPS).ISO code system for tolerances of linear sizes

BS EN ISO 286-1Basis of tolerances, deviations and fits

TDW/4

BS EN 480:—Admixtures for concrete, mortar and grout. Testmethods

BS EN 480-13 (Revision)Reference masonry mortar for testing mortaradmixtures

will supersede BS EN 480-13:2002

B/517/3

BS EN 485:—Aluminium and aluminium alloys. Sheet, stripand plate

BS EN 485-1:2008/Amendment 1Technical conditions for inspection and delivery

NFE/35/5

BS 8531Code of practice for the performance of roofdrainage systems in metal

B/542/6

BS EN 46:—Wood preservatives. Determination of thepreventive action against Hylotrupes bajalus(Linnaeus)

BS EN 46-1 (Revision)Larvicidial effect (laboratory method)


B/515

BS EN 46-2 (Revision)Ovicidal effect (laboratory method)


B/515

DD CEN/TS 81:—Safety rules for the construction and installationof lifts

DD CEN/TS 81-83Existing lifts

MHE/4

BS EN WI 00121555Welding. Use of (semi) automated phased arraytechnology for examination of welds

WEE/46

DD CEN/TS WI 00260080Fertilizers. Extraction of phosphorus soluble in2% formic acid (Method 3.1.2)

CII/37

DD CEN/TS WI 00260081Fertilizers. Extraction of phosphorus soluble in2% citric acid (Method 3.1.3)

CII/37

DD CEN/TS WI 00260083Fertilizers. Extraction of phosphorus soluble inalkaline ammonium citrate according toPetermann at 65°C (Method 3.1.5.1)

CII/37

DD CEN/TS WI 00260084Fertilizers. Extraction of phosphorus soluble inalkaline ammonium citrate according toPetermann at ambient temperature (Method3.1.5.2)

CII/37

DD CEN/TS WI 00260085Fertilizers. Extraction of phosphorus soluble inJoulie’s alkaline ammonium citrate (Method3.1.5.3)

CII/37

DD CEN/TS WI 00260089Fertilizers. Determination of the fineness of grinding of soft natural phosphates (Method 7.2)

CII/37

BS AU 263:1995(ISO 2347:1994)Road vehicles. M14 X 1,25 compact spark-plugswith conical seating and their cylinder headhousing

MCE/9

BS AU 264:1995(ISO 2345:1994)Road vehicles. M18 X 1,5 spark-plugs withconical seating and their cylinder head housing

MCE/9

NEW WORK STARTED

The reference number of the committeeresponsible for each item of new workstarted is given after each entry.

Where a work item has the temporarydesignation “BS EN XXXX”, it has not yetbeen allocated a standard number by theEuropean standards body.

BS 1133:—Packaging code

BS 1133-8 (Revision)Wooden boxes, cases and crates

will supersede BS 1133-8:1991

PKW/0

BS 6891 (Revision)Installation of low pressure gas pipework of upto 35 mm (R1 1/4) in domestic premises (2ndfamily gas). Specification

will supersede BS 6891:2005+A2:2008

GSE/30

BS 7188:1998/Amendment 2Impact absorbing playground surfacing.Performance requirements and test methods

SW/65

BS 8478:2006/Amendment 1Respiratory protective devices. Breathing gasesfor diving and hyperbaric applications

PH/4/7

BS 8517:—Code of practice for security dogs

BS 8517-2Detection dogs

GW/3/-/15

BS 8529Specification for composite door assemblies.Domestic external door assemblies

B/538/2

BS 8530Traditional style aluminium gutter andrainwater pipe systems

B/542/6


BS EN 1889:—Machines for underground mines. Mobilemachines working underground. Safety

BS EN 1889-2:2003/Amendment 1Rail locomotives

MRE/1

BS EN 1948:—Stationary source emissions. Determination ofthe mass concentration of PCDDs/PCDFs anddioxin-like PCBs

BS EN 1948-4 (Revision)Sampling and analysis of dioxin-like PCBs

will supersede DD CEN/TS 1948-4:2007

EH/2/1

BS EN ISO 4254:—Agricultural machinery. Safety

BS EN ISO 4254-10Rotary tedders and rakes

AGE/32

PD CEN/TR 4680Aerospace series. Contacts, electrical,qualification for change of materials andprocess

ACE/6

BS EN ISO 7779:2001/Amendment 2Acoustics. Measurement of airborne noiseemitted by information technology andtelecommunications equipment

EH/1

BS EN ISO 9117:—Paints and varnishes. Drying tests

BS EN ISO 9117-1Determination of through-dry state andthrough-dry time

STI/10

BS EN ISO 10218:—Robots for industrial environments. Safetyrequirements

BS EN ISO 10218-1 (Revision)Robot

will supersede BS EN ISO 10218-1:2006

AMT/-/2

BS EN ISO 10848:—Acoustics. Laboratory measurement of theflanking transmission of airborne and impactnoise between adjoining rooms

BS EN ISO 10848-4All other cases

EH/1

BS EN ISO 1288-5Coaxial double-ring test on flat specimens withsmall test surface areas

B/520

BS EN 1342 (Revision)Setts of natural stone for external paving.Requirements and test methods


B/507

BS EN 1418 (Revision)Welding personnel. Approval testing of weldingoperators for fusion welding and resistanceweld setters for fully mechanized andautomatic welding of metallic materials


WEE/36

BS EN 1591:—Flanges and their joints. Design rules forgasketed circular flange connections

BS EN 1591-1:2001/Amendment 1Calculation method

PSE/15

BS EN 1708:—Welding. Basic weld joint details in steel

BS EN 1708-3Plating, buttering, lining of pressurizedcomponents

WEE/-/1

BS EN 1760:—Safety of machinery. Pressure sensitiveprotective devices

BS EN 1760-2:2001/Amendment 1General principles for the design and testing ofpressure sensitive edges and pressure sensitivebars

MCE/3

BS EN 1760-3:2004/Amendment 1General principles for the design and testing ofpressure sensitive bumpers, plates, wires andsimilar devices

MCE/3

BS EN 1807:—Safety of woodworking machines. Band sawingmachines

BS EN 1807-1 (Revision)Table band saws and band re-saws


MTE/23

BS EN 1807-2 (Revision)Log sawing machines


MTE/23

BS EN 488 (Revision)District heating pipes. Preinsulated bonded pipesystems for directly buried hot water networks.Steel valve assembly for steel service pipes,polyurethane thermal insulation and outercasing of polyethylene


RHE/9

BS EN 957:—Stationary training equipment

BS EN 957-6 (Revision)Treadmills, additional specific safetyrequirements and test methods


SW/136/4

BS EN 1034:—Safety of machinery. Safety requirements forthe design and construction of paper makingand finishing machines

BS EN 1034-16Paper and boardmaking machines

MCE/3/9

BS EN ISO 1043:—Plastics. Symbols and abbreviated terms

BS EN ISO 1043-2 (Revision)Fillers and reinforcing materials


PRI/10

BS EN 1127:—Explosive atmospheres. Explosion preventionand protection

BS EN 1127-1 (Revision)Basic concepts and methodology


FSH/23

BS EN ISO 1288:—Glazing in building. Determination of thebending strength of glass

BS EN ISO 1288-1Fundamentals of testing glass

B/520

BS EN ISO 1288-2Coaxial double-ring test on flat specimens withlarge test surface areas

B/520

BS EN ISO 1288-3Test with specimen supported at two points(four-point bending)

B/520

BS EN ISO 1288-4Testing of channel-shaped glass

B/520

New Work Started continued...


BS EN 14774-2 (Revision)Total moisture. Simplified method


PTI/17

BS EN 14774-3 (Revision)Moisture in general analysis sample


PTI/17

BS EN 14775 (Revision)Solid biofuels. Method for the determination ofash content

will supersede DD CEN/TS 14775:2004

PTI/17

BS EN 14918 (Revision)Solid biofuels. Method for the determination ofcalorific value


PTI/17

BS EN 14938:—Copper and copper alloys. Determination ofbismuth content

BS EN 14938-2 (Revision)FAAS method


NFE/34

BS EN ISO 15011:—Health and safety in welding and alliedprocesses. Laboratory method for samplingfume and gases

BS EN ISO 15011-5 (Revision)Identification of thermal-degradation productsgenerated when welding or cutting throughproducts composed wholly or partly of organicmaterials

will supersede DD CEN ISO/TS 15011-5:2006

WEE/40

DD CEN ISO/TS 15011:—Health and safety in welding and alliedprocesses. Laboratory method for samplingfume and gases

DD CEN ISO/TS 15011-6Procedure for quantitative determination offume from resistance spot welding

WEE/40

BS EN 15023:—Copper and copper alloys. Determination ofnickel content

BS EN 15023-3 (Revision)Flame atomic absorption spectrometry method(FAAS)


NFE/34

BS EN 13463:—Non-electrical equipment intended for use inpotentially explosive atmospheres

BS EN 13463-5 (Revision)Protection by constructional safety ’c’


FSH/23/-/2

BS EN 13617:—Petrol filling stations

BS EN 13617-1:2004/Amendment 1Safety requirements for construction andperformance of metering pumps, dispensersand remote pumping units

PVE/21

BS EN 13618Flexible hose assemblies in drinking waterinstallations. Functional requirements and testmethods

B/504

BS EN ISO 13628:—Petroleum and natural gas industries. Designand operation of subsea production systems

BS EN ISO 13628-1:2005/Amendment 1General requirements and recommendations

PSE/17/-/4

BS EN ISO 13628-1:2005/Amendment 2General requirements and recommendations

PSE/17/-/4

BS EN ISO 13688Protective clothing. General requirements


PH/3/12

BS EN ISO 14343 (Revision)Welding consumables. Wire electrodes, stripelectrodes, wires and rods for fusion welding ofstainless and heat resisting steels. Classification

will supersede BS EN ISO 14343:2007

WEE/39

BS EN 14476:2005/Amendment 2Chemical disinfectants and antiseptics. Virucidalquantitative suspension test for chemicaldisinfectants and antiseptics used in humanmedicine. Test method and requirements (phase2, step 1)

CH/216

BS EN 14774:—Solid biofuels. Methods for the determinationof moisture content. Oven dry method

BS EN 14774-1 (Revision)Total moisture. Reference method


PTI/17

BS EN ISO 11114:—Transportable gas cylinders. Compatibility ofcylinder and valve materials with gas contents

BS EN ISO 11114-1 (Revision)Metallic materials


PVE/3

BS EN ISO 11446 (Revision)Road vehicles. Connectors for the electricalconnection of towing and towed vehicles. 13-pole connectors for vehicles with 12 Vnominal supply voltage


AUE/16

BS EN 12321:2003/Amendment 1Underground mining machinery. Specificationfor the safety requirements of armoured faceconveyors

MRE/1

BS EN 12597 (Revision)Bitumen and bituminous binders. Terminology


PTI/13

BS EN 12697:—Bituminous mixtures. Test methods for hot mixasphalt

BS EN 12697-5 (Revision)Determination of the maximum density


B/510/1

BS EN 12697-46Low temperature cracking and properties byuniaxial tension tests

B/510/1

BS EN 12829 (Revision)Surface active agents. Preparation of waterwith known calcium hardness


CII/34

BS EN 13263:—Silica fume for concrete

BS EN 13263-2:2005/Amendment 1Conformity evaluation

B/517/4

BS EN 13411:—Terminations for steel wire ropes. Safety

BS EN 13411-4 (Revision)Metal and resin socketing


MHE/2


BS EN 15916:—Copper and copper alloys. Determination oftellurium content

BS EN 15916-2Medium tellurium content. Flame atomicabsorption spectrometric method (FAAS)

NFE/34

BS EN 15918Cycles. Bicycles trailers. safety requirements andtest methods

GME/25

BS EN 15927Services offered by hearing aid professionals

EH/1/1

BS EN 15930Textiles. Elasticity of fibres. Test methods

TCI/24

BS EN ISO 16591Petroleum products. Determination of sulfurcontent. Oxidative microcoulometry method

PTI/13

BS EN ISO 17072:—Leather. Chemical determination of metalcontent

BS EN ISO 17072-1Extractable metals

TCI/69

BS EN ISO 17072-2Total metal content

TCI/69

BS EN ISO 17638Non-destructive testing of welds. Magneticparticle testing


WEE/46

BS EN ISO 20349Personal protective equipment. Footwearprotecting against molten metal splash.Requirements and test methods

PH/1

BS EN ISO 22476:—Geotechnical investigation and testing. Fieldtesting

BS EN ISO 22476-4Ménard pressure meter test

B/526/3

BS EN ISO 23277Non-destructive testing of welds. Penetranttesting of welds. Acceptance levels


WEE/46

BS EN 15376:2007/Amendment 1Automotive fuels. Ethanol as a blendingcomponent for petrol. Requirements and testmethods

PTI/2

BS EN 15605Copper and copper alloys. Inductively coupledplasma optical emission spectrometric

NFE/34

BS EN ISO 15630:—Steel for the reinforcement and prestressing ofconcrete. Test methods

BS EN ISO 15630-1 (Revision)Reinforcing bars, wire rod and wire


ISE/9

BS EN ISO 15630-2 (Revision)Welded fabric


ISE/9

BS EN ISO 15630-3 (Revision)Prestressing steel


ISE/9

BS EN 15708Water quality. Guidance standard for thesurveying, sampling and laboratory analysis ofphytobenthos in shallow running water

EH/3/5

BS EN 15749 (Revision)Fertilizers. Determination of sulfates contentusing three different methods


CII/37

BS EN 15750 (Revision)Fertilizers. Determination of different forms ofnitrogen in fertilizers containing nitrogen onlyas nitric, ammoniacal and urea nitrogen by twodifferent methods


CII/37

BS EN 15911Foodstuffs. Simultaneous determination of ninesweeteners by high performance liquidchromatography and evaporative lightscattering detection

AW/-/3

PD CEN/TR 15913Layout criteria for viewing area for spectatorswith special needs

B/552

BS EN 15915Copper and copper alloys. Determination ofsilver content. Flame atomic absorptionspectrometric method (FAAS)

NFE/34

BS EN 15025 (Revision)Copper and copper alloys. Determination ofmagnesium content. Flame atomic absorptionspectrometry method (FAAS)


NFE/34

BS EN ISO 15027:—Immersion suits

BS EN ISO 15027-1 (Revision)Constant wear suits, requirements includingsafety


PH/3/6

BS EN ISO 15027-2 (Revision)Abandonment suits, requirements includingsafety


PH/3/6

BS EN ISO 15027-3 (Revision)Test methods


PH/3/6

BS EN 15037:—Precast concrete products. Beam-and-block floorsystems

BS EN 15037-4Polystyrene blocks

B/524

BS EN 15103 (Revision)Solid biofuels. Methods for the determinationof bulk density


PTI/17

BS EN 15148 (Revision)Solid biofuels. Method for the determination ofthe content of volatile matter


PTI/17

BS EN 15210:—Solid biofuels. Method for the determination ofmechanical durability of pellets and briquettes

BS EN 15210-1 (Revision)Pellets


PTI/17

BS EN 15293Automotive fuels. Ethanol E85. Requirementsand test methods

PTI/2

DD CEN/TS 15366Winter and road service area maintenanceequipment. Solid absorbents intended for roadusage

B/513



BS ISO 1219:—Fluid power systems and components. Graphicsymbols and circuit diagrams

BS ISO 1219-2 (Revision)Circuit diagrams

will supersede BS ISO 1219-2:1995

MCE/18

BS ISO 1407Rubber. Determination of solvent extract


PRI/22

BS ISO 1519 (Revision)Paints and varnishes. Bend test (cylindricalmandrel)


STI/10

BS ISO 1817 (Revision)Rubber, vulcanized. Determination of the effectof liquids

will supersede BS ISO 1817:2005

PRI/22

BS ISO 1853Conducting and dissipative rubbers, vulcanizedor thermoplastic. Measurement of resistivity

PRI/22

BS ISO 2303 (Revision)Isoprene rubber (IR). Non-oil-extended,solution-polymerized types. Evaluationprocedure


PRI/23

BS ISO 2811:—Paints and varnishes. Determination of density

BS ISO 2811-1 (Revision)Pyknometer method


STI/10

BS ISO 2811-2 (Revision)Immersed body (plummet) method


STI/10

BS ISO 2811-3 (Revision)Oscillation method


STI/10

BS ISO 2811-4 (Revision)Pressure cup method


STI/10

BS ISO 36 (Revision)Rubber, vulcanized or thermoplastic.Determination of adhesion to textile fabrics


PRI/22

BS ISO 37 (Revision)Rubber, vulcanized or thermoplastic.Determination of tensile stress-strain properties


PRI/22

BS ISO 105:—Textiles. Tests for colour fastness

BS ISO 105-A11Determination of colour fastness grades bydigital imaging techniques

TCI/81

BS ISO 105-B02 (Revision)Colour fastness to artificial light. Xenon arcfading lamp test

will supersede BS EN ISO 105-B02:1999

TCI/81

BS ISO 105-G01 (Revision)Colour fastness to nitrogen oxides

will supersede BS EN ISO 105-G01:1996

TCI/81

BS ISO 132 (Revision)Rubber, vulcanized or thermoplastic.Determination of flex cracking and crackgrowth (De Mattia)


PRI/22

PD ISO/TR 230:—Test code for machine tools

PD ISO/TR 230-11Measuring instruments and their application tomachine tool geometry tests

MTE/1

BS ISO 248:—Rubber, raw. Determination of volatile-mattercontent

BS ISO 248-1Hot-mill method and oven method

PRI/23

BS ISO 630:—Structural steels

BS ISO 630-1General delivery conditions for hot rolledproducts

ISE/12

BS ISO 630-2Technical delivery conditions for non alloystructural steels for general purpose

ISE/12

BS EN ISO 23278Non-destructive testing of welds. Magneticparticle testing of welds. Acceptance levels


WEE/46

BS EN 60061:—Specification for lamp caps and holderstogether with gauges for the control ofinterchangeability and safety

BS EN 60061-2:1997/Amendment 40Lampholders

CPL/34/2

BS EN 60061-3:1997/Amendment 41Gauges

CPL/34/2

BS EN 60512:—Connectors for electronic equipment. Tests andmeasurements

BS EN 60512-99-001Test schedules. Mechanical operation, un-mating connectors under electrical load,applicable to IEC 60603-7 series connectors andIEC 61076-3-1xx connectors having the IEC60603-7 series mating interface.

EPL/48

BS EN 60695:—Fire hazard testing

BS EN 60695-7-1 (Revision)Toxicity of fire effluent. General guidance

will supersede BS EN 60695-7-1:2004

GEL/89

BS EN 61169:—Radio-frequency connectors

BS EN 61169-14R.F. coaxial connectors with inner diameter ofouter conductor with 12 mm (0.472 in) withscrew coupling. Characteristic impedance 75ohms (Type 3.5/12)

EPL/46/2

BS EN 61820Electrical installation for lighting and beaconingof aerodromes. Constant current series circuitsaeronautical ground lighting. System designand installation requirements

EPL/97

BS EN ISO 80601:—Medical electrical equipment

BS EN ISO 80601-2-55Particular requirements for the basic safety andessential performance of respiratory gasmonitors


CH/121/1


BS ISO 4664:—Rubber, vulcanized or thermoplastic.Determination of dynamic properties

BS ISO 4664-1 (Revision)General guidance


PRI/22

BS ISO 4919Textile floor coverings. Determination of tuftwithdrawal force

PRI/3/60

BS ISO 4965:—Metallic materials. Fatigue testing. Uniaxialdynamic force calibration

BS ISO 4965-1Testing machine

ISE/NFE/4

BS ISO 4965-2Dynamic Calibration Device (DCD)instrumentation

ISE/NFE/4

BS ISO 5530:—Wheat flour. Physical characteristics of doughs

BS ISO 5530-1Determination of water absorption andrheological properties using a farinograph


AW/4

BS ISO 5692:—Agricultural vehicles. Mechanical connectionson towed vehicles

BS ISO 5692-3Swivel hitch rings

AGE/6

BS ISO 5794:—Rubber compounding ingredients. Silica,precipitated, hydrated

BS ISO 5794-1:2005/Amendment 1Non-rubber tests

PRI/23

BS ISO 5814Water quality. Determination of dissolvedoxygen. Electrochemical probe method

EH/3/2

BS ISO 6072 (Revision)Hydraulic fluid power. Compatibility betweenfluids and standard elastomeric materials


CH/205/3

BS ISO 3720Black tea. Definition and basic requirements

will supersede BS 6048:1987

AW/90

BS ISO 3864:—Graphical symbols. Safety colours and safetysigns

BS ISO 3864-1Design principles for safety signs and safetymarkings

PH/8/1

BS ISO 3864-4Specification of colorimetric and photometricproperties of materials

PH/8/1

BS ISO 3972Sensory analysis. Methodology. Method ofinvestigating sensitivity of taste


AW/12

BS ISO 4126:—Safety devices for protection against excessivepressure

BS ISO 4126-1 (Revision)Safety valves


PVE/12

BS ISO 4126-4 (Revision)Pilot-operated safety valves


PVE/12

BS ISO 4126-5 (Revision)Controlled safety pressure relief systems (CSPRS)


PVE/12

BS ISO 4126-7 (Revision)Common data


PVE/12

BS ISO 4150Green coffee. Size analysis. Manual sieving


AW/15

BS ISO 4397Fluid power systems and components.Connectors and associated components.Nominal outside diameters of tubes andnominal size of hoses

MCE/18/-/4

BS ISO 2878 (Revision)Rubber. Antistatic and conductive products.Determination of electrical resistance


PRI/22

BS ISO 2921 (Revision)Rubber, vulcanized. Determination of low-temperature characteristics. Temperature-retraction procedure (TR test)


PRI/22

BS ISO 2926 (Revision)Aluminium oxide used for the production ofprimary aluminium. Particle size analysis for therange 45 µm to 150 µm. Method usingelectroformed sieves


CII/24

BS ISO 2944 (Revision)Fluid power systems and components. Nominalpressures


MCE/18

BS ISO 3087 (Revision)Iron ores. Determination of the moisturecontent of a lot


ISE/58

BS ISO 3384 (Revision)Rubber, vulcanized or thermoplastic.Determination of stress relaxation incompression at ambient and at elevatedtemperatures


PRI/22

BS ISO 3394Specification for plan dimensions of rigidrectangular transport packages with a modularrelationship to 1200 mm x 1000 mm and 1200 mm x 800 mm pallets and unit loads


PKW/0

BS ISO 3534:—Statistics. Vocabulary and symbols

BS ISO 3534-3 (Revision)Design of experiments


SS/1

BS ISO 3656 (Revision)Animal and vegetable fats and oils.Determination of ultraviolet absorbanceexpressed as specific UV extinction


AW/307

BS ISO 3676Packaging. Unit load sizes. Dimensions

PKW/0



BS ISO 7010:2003/Amendment 72Graphical symbols. Safety colours and safetysigns. Safety signs used in workplaces andpublic areas

PH/8/1


PH/8/1


PH/8/1


PH/8/1


PH/8/1


PH/8/1

BS ISO 7133Earth-moving machinery. Tractor-scrapers.Terminology and commercial specifications


B/513/1

BS ISO 7203:—Fire extinguishing media. Foam concentrates

BS ISO 7203-1 (Revision)Specification for low expansion foamconcentrates for top application to water-immiscible liquids


FSH/23

BS ISO 7203-2 (Revision)Specification for medium and high expansionfoam concentrates for top application to water-immiscible liquids


FSH/18/3

BS ISO 7203-3Specification for low expansion foamconcentrates for top application to water-miscible liquids

FSH/18/3

BS ISO 6747Earth-moving machinery. Tractor-dozers.Terminology and commercial specifications


B/513/1


PH/8/1


PH/8/1


PH/8/1


PH/8/1


PH/8/1


PH/8/1


PH/8/1


PH/8/1


PH/8/1


PH/8/1

BS ISO 6162:—Hydraulic fluid power. Flange connectors withsplit or one-piece flange clamps and metric orinch screws

BS ISO 6162-1 (Revision)Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 toDN 127


MCE/18/-/4

BS ISO 6358:—Pneumatic fluid power. Determination of flow-rate characteristics of components usingcompressible fluids

BS ISO 6358-5Method for calculating flow-rate characteristicsfor groups of components

MCE/18/-/5

BS ISO 6474:—Implants for surgery. Ceramic materials

BS ISO 6474-2Composite materials based on a high purityalumina matrix with zirconia reinforcement

CH/150/1

BS ISO 6489:—Agricultural vehicles. Mechanical connectionsbetween towed and towing vehicles

BS ISO 6489-5Specifications for non swivel clevis couplings

AGE/6

BS ISO 6565Tobacco and tobacco products. Draw resistanceof cigarettes and pressure drop of filter rods.Standard conditions and measurement


AW/40

BS ISO 6666Coffee triers


AW/15

BS ISO 6722 (Revision)Road vehicles. 60 V and 600 V single-corecables. Dimensions, test methods andrequirements


AUE/16

BS ISO 6741:—Textiles. Fibres and yarns. Determination ofcommercial mass of consignments

BS ISO 6741-4Values used for the commercial allowances andthe commercial moisture regains

TCI/24


BS ISO 9038 (Revision)Test for sustained combustibility of liquids


STI/10

BS ISO 9092Textiles. Nonwovens. Definition


TCI/24

BS ISO 9094 (Revision)Small craft. Fire protection

will supersede BS EN ISO 9094-1:2003 andBS EN ISO 9094-2:2002

GME/33

BS ISO 9241:—Ergonomics of human-system interaction

BS ISO 9241-100Introduction to standards related to softwareergonomics

PH/9

BS ISO 9289 (Revision)Oilseed residues. Determination of free residualhexane


AW/307

BS ISO 9344Optics and optical instruments. Microscopes.Graticules for eyepieces


CPW/172/5

BS ISO 9459:—Solar heating. Domestic water heating systems

BS ISO 9459-4System performance characterization by meansof component tests and computer simulation

RHE/25

BS ISO 9628 (Revision)Rolling bearings. Insert bearings and eccentriclocking collars. Boundary dimensions andtolerances


MCE/7

BS ISO 9698Water quality. Determination of tritium activityconcentration. Liquid scintillation countingmethod

EH/3

BS ISO 10018Quality management. Guidelines on peopleinvolvement and competences

QS/1

BS ISO 8124:—Safety of toys

BS ISO 8124-1:2000/Amendment 6Safety aspects related to mechanical andphysical properties

CW/15

BS ISO 8255:—Optics and optical instruments. Microscopes.Cover glasses

BS ISO 8255-1Dimensional tolerances, thickness and opticalproperties

will supersede BS 7011-3.1:1989

CPW/172/5

BS ISO 8455Green coffee in bags. Guidance on storage andtransport


AW/15

BS ISO 8502:—Preparation of steel substrates beforeapplication of paints and related products. Testsfor the assessment of surface cleanliness

BS ISO 8502-13Field method for the direct conductometricdetermination of water-soluble salts (rigid-cellmethod)

STI/21

BS ISO 8586:—Sensory analysis. General guidance for theselection, training and monitoring of assessors

BS ISO 8586-1Selected assessors


AW/12

BS ISO 8624 (Revision)Ophthalmic optics. Spectacle frames. Measuringsystem and terminology


CH/172/3

BS ISO 8637Cardiovascular implants and artificial organs.Haemodialysers, haemodiafilters, haemofiltersand haemoconcentrators


CH/150/2

BS ISO 8638Cardiovascular implants and artificial organs.Extracorporeal blood circuit for haemodialysers,haemodiafilters and haemofilters


CH/150/2

BS ISO 7206:—Implants for surgery. Partial and total hip jointprostheses

BS ISO 7206-6Determination of endurance properties of headand neck region of stemmed femoralcomponents


CH/150/4

BS ISO 7207:—Implants for surgery. Components for partialand total knee joint prostheses

BS ISO 7207-2Articulating surfaces made of metal, ceramicand plastics materials


CH/150/4

BS ISO 7240:—Fire detection and alarm systems

BS ISO 7240-12Line type smoke detectors using a transmittedoptical beam

FSH/12

PD ISO/TR 7250:—Basic human body measurements fortechnological design

PD ISO/TR 7250-2Statistical summaries of body measurementsfrom individual ISO populations

PH/9/4

BS ISO 7970 (Revision)Wheat (Triticum aestivum L.). Specification


AW/4

BS ISO 8000:—Data quality

BS ISO 8000-120Master data. Provenance

AMT/4

BS ISO 8038Microscopes. Screw threads for objectives andrelated nosepieces

will supersede BS 7012-4.1:1998

CPW/172/5

BS ISO 8091Textiles. Twist factor related to the tex system

TCI/24



BS ISO 10786Space systems. Structural components andassemblies

ACE/68/-/1

BS ISO 10788Space systems. Lunar dust simulant

ACE/68/-/4

BS ISO 10789Space systems. Programme management.Information and documentation management

ACE/68/-/5

BS ISO 10794Space systems. Programme management.Material, mechanical parts and processes

ACE/68/-/5

BS ISO 10795Space systems. Programme management.Vocabulary

ACE/68/-/5

BS ISO 10830Space systems. Non-destructive testing. Methodof automatic ultrasonic inspection of graphiteingot for solid rocket motor

ACE/68/-/8

DD ISO/TS 10832Soil quality. Effects of pollutants on mycorrhizalfungi

EH/4

BS ISO 10870Water quality. Guidance on the selection ofsampling methods and devices for benthicmacroinvertebrates in fresh waters

EH/3/5

BS ISO 10905Lunar dust creation, suspension and transport

ACE/68/-/4

BS ISO 10930Soil quality. Measurement of stability of soilaggregates to assess the sensitivity to crustingand water erosion

EH/4

BS ISO 10988Equipment for crop protection. Knapsackcombustion engine driven mitblowers. Testmethod and performance limits

AGE/15

PD ISO/TR 10992Nomadic devices to support ITS service andmultimedia provision in vehicles

EPL/278

DD ISO/TS 10303:—Industrial automation systems and integration.Product data representation and exchange

DD ISO/TS 10303-433Application module. AP 233 systemsengineering

AMT/4

BS ISO 10392Road vehicles. Determination of centre ofgravity

will supersede BS AU 246:1992

AUE/15

BS ISO 10542:—Technical systems and aids for disabled orhandicapped persons. Wheelchair tiedown andoccupant-restraint systems

BS ISO 10542-1 (Revision)Requirements and test methods for all systems


CH/173/1

BS ISO 10571Specification for tyres and wheels. Tyres. Off-the-road tyres. Specification for tyres for mobilecranes and similar specialized machines

will supersede BS AU 50-1.3.3:1996

AUE/4

BS ISO 10711Intelligent transport systems. Interface protocoland message set definition between trafficsignal controllers and detectors (IPMSTSCD)

EPL/278

BS ISO 10772Test method for pore size determination underturbulent water flow conditions

B/553

BS ISO 10776Geotextiles and geotextile-related products.Determination of water permeabilitycharacteristics normal to the plane, under load

B/553

BS ISO 10784:—Space systems. Early operations

BS ISO 10784-1Initializing and commissioning

ACE/68/-/2

BS ISO 10784-2Initialization plan

ACE/68/-/2

BS ISO 10784-3Commisioning report

ACE/68/-/2

BS ISO 10785Space systems. Bellows. Design and operation

ACE/68/-/1

BS ISO 10041:—Pneumatic fluid power. Electrically modulatedpneumatic flow rate control valves

BS ISO 10041-1Main characteristics to include in the supplier’sliterature for three-port control valves

MCE/18/-/5

BS ISO 10041-2Test methods to determinate maincharacteristics to include in the supplier’sliterature for three-port control valves

MCE/18/-/5

BS ISO 10077:—Thermal performance of windows, doors andshutters. Calculation of thermal transmittance

BS ISO 10077-2 (Revision)Numerical method for frames


B/540/2

BS ISO 10094:—Pneumatic fluid power. Electrically modulatedpneumatic pressure control valves

BS ISO 10094-1Main characteristics to include in the supplier’sliterature

MCE/18/-/5

BS ISO 10094-2Test methods to determine main characteristicsto include in the supplier’s literature

MCE/18/-/5

BS ISO 10159Health informatics. ISO/web access resourcemanifest

IST/35

BS ISO 10209 (Revision)Technical product documentation. Vocabulary.Terms relating to technical drawings, productdefinition and related products

will supersede BS ISO 10209-1:1992 andBS EN ISO 10209-2:1996

TDW/4

BS ISO 10303:—Industrial automation systems and integration

BS ISO 10303-52Integrated generic resource. Mesh-basedtopology

AMT/4

BS ISO 10303-53Integrated generic resource. Numerical analysis

AMT/4


BS ISO 11350Water quality. Determination of thegenotoxicity of water and waste water.Salmonella/microsome fluctuation test (Amesfluctuation test)

EH/3/5

BS ISO 11356Crop protection equipment. Spray parameterrecording for traceability

AGE/15

BS ISO 11368Building environment design. Energyperformance of buildings. Methodology toassess the overall energy and environmentalimpact by using a holistic (complete) approachprocedure

RHE/2

BS ISO 11396Crocodile skins. Description of defects, gradingon the basis of defects and size

TCI/69

BS ISO 11398Raw ostrich skins. Description of defects,preservation and grading

TCI/69

BS ISO 11504Soil quality. Assessment of impact from soilcontaminated with mineral oil

EH/4

PD ISO/TR 11583:—Measurement of wet gas flow by means ofpressure differential devices inserted in circularcross-section conduits running full

PD ISO/TR 11583-1General principles and requirements

CPI/30/2

BS ISO 11619Specification for polyurethane tubing for useprimarily in pneumatic installations

PRI/66/-/1

DD ISO/TS 11669Parameters to be considered when starting atranslation project

TS/1

BS ISO 11672Connectors for fluid power and general use.Designation and nomenclature

MCE/18/-/4

BS ISO 11680:—Machinery for forestry. Safety requirements andtesting for pole-mounted powered pruners

BS ISO 11680-1 (Revision)Units fitted with an integral combustion engine


AGE/29

BS ISO 11227Space systems. Test procedure to evaluatespacecraft material ejecta upon hypervelocityimpact

ACE/68

BS ISO 11229Space systems. Requirements for manufacturingand procurement of threaded fasteners

ACE/68

BS ISO 11230Space systems. Standard methods formechanical testing of metallic materials

ACE/68

BS ISO 11231Space systems. Probabilistic Risk Assessment(PRA)

ACE/68/-/5

BS ISO 11232Space systems. Spacecraft to launch vehicleinterfaces

ACE/68

BS ISO 11250Mechanical female contraceptive devices. Tuballigation/fallopian rings

CH/157

BS ISO 11252 (Revision)Lasers and laser-related equipment. Laserdevice. Minimum requirements fordocumentation


CPW/172/9

BS ISO 11269:—Soil quality. Determination of the effects ofpollutants on soil flora

BS ISO 11269-1Method for the measurement of inhibition ofroot growth

will supersede BS 7755-4.3.1:1994

EH/4

BS ISO 11269-2 (Revision)Effects of contaminated soils on the emergenceand growth of higher plants


EH/4

BS ISO 11287Green tea. Definition and basic requirements

AW/90

BS ISO 11341 (Revision)Paints and varnishes. Artificial weathering andexposure to artificial radiation. Exposure tofiltered xenon-arc radiation


STI/10

BS ISO 10993:—Biological evaluation of medical devices

BS ISO 10993-3 (Revision)Tests for genotoxicity, carcinogenicity andreproductive toxicity


CH/194

BS ISO 10993-12 (Revision)Sample preparation and reference materials


CH/194

BS ISO 11026Heavy commercial vehicles and buses. Testmethod for roll stability. Closing curve test

AUE/15

BS ISO 11037Sensory analysis. General guidance and testmethod for assessment of the colour of foods


AW/12

BS ISO 11039Standards on the definition and measurementmethods of drift rates of SPMs

CII/60

DD ISO/TS 11059Milk and milk products. Method for theenumeration of Pseudomonas spp.

AW/5

BS ISO 11132Sensory analysis. Methodology. Generalguidance for monitoring the performance of aquantitative sensory panel

AW/12

BS ISO 11137:—Sterilization of health care products. Radiation

BS ISO 11137-2 (Revision)Establishing the sterilization dose


CH/198

BS ISO 11156Guidelines for all people including elderlypersons and persons with disabilities. Packagingand receptacles

PKW/0/-/5

BS ISO 11221Space systems. Space solar panels. Spacecraftcharging induced electrostatic discharge testmaterials

ACE/68

BS ISO 11225Space environment (natural and artificial).Guide to reference and standard atmospheremodels

ACE/68



BS ISO 11891Hot formed helical compression springs.Technical specifications

GME/15

BS ISO 11892Space systems. Subsystems/units to spacecraftinterface control document

ACE/68/-/2

BS ISO 11893Space systems. Programme management.Project organization

ACE/68/-/5

BS ISO 11915Communications access for land mobiles. Highspeed, air interface parameters and protocolsfor broadcast, point-point, vehicle-vehicle, andvehicle-point communications in the ITS Sectorusing IEEE802.11 wireless LAN standard innormal operational modes

EPL/278

BS ISO 11916:—Soil quality. Determination of explosivecompounds

BS ISO 11916-1Method using HPLC

EH/4

BS ISO 11926:—Connections for general use and fluid power.Ports and stud ends with ISO 725 threads andO-ring sealing

BS ISO 11926-1Ports with O-ring seal intruncated housing

MCE/18/-/4

BS ISO 11926-2Heavy-duty (S series) stud ends

MCE/18/-/4

BS ISO 11926-3Light-duty (L series) stud ends

MCE/18/-/4

BS ISO 11926-4Dimensions, design, test methods andrequirements for external and internal hex portplugs

MCE/18/-/4

DD ISO/TS 11931:—Nanotechnologies. Nano-calcium carbonate

DD ISO/TS 11931-1Characteristics and measurement methods

NTI/1/-/4

BS ISO 11783-5Network management

AGE/32

BS ISO 11806:—Agricultural and forestry machinery. Safetyrequirements and testing for portable hand-held powered brush-cutters and grass-trimmers

BS ISO 11806-1 (Revision)Machines for use with an integral combustionengine


AGE/29

BS ISO 11806-2 (Revision)Machines for use with a backpack power source


AGE/29

PD ISO/TR 11827Textiles. Composition testing. Identification offibres

TCI/80

BS ISO 11837Machinery for forestry. Saw chain shot guardingsystems. Test method and performance criteria

AGE/29

BS ISO 11850 (Revision)Machinery for forestry. Self-propelledmachinery. Safety requirements


AGE/29

BS ISO 11855:—Building environment design. Radiant heatingand cooling system

BS ISO 11855-3Design and dimensioning

RHE/2

BS ISO 11855-4Dynamic analysis for TABS

RHE/2

BS ISO 11855-5Installation and commissioning

RHE/2

BS ISO 11855-6Operation and control

RHE/2

BS ISO 11855-7Electric heating system

RHE/2

DD ISO/TS 11888Determination of mesoscopic shape factors ofmultiwalled carbon nanotubes (MWCNTs)

NTI/1

BS ISO 11680-2 (Revision)Machine for use with back-pack power source


AGE/29

BS ISO 11686Connectors for fluid power and general use.Assembly instructions for connectors withadjustable stud ends and O ring sealing

MCE/18/-/4

BS ISO 11706Carbonaceous materials for the production ofaluminium. Prebaked anodes. Determination ofthe fracture energy

CII/24

BS ISO 11709Soil quality. Determination of selected coal-tarderived phenolic compounds using highperformance liquid chromatography (HPLC)

EH/4

BS ISO 11746Rice. Determination of biometric characteristicsof kernels

AW/4

BS ISO 11747Rice. Determination of cooked rice kernelhardness index

AW/4

BS ISO 11764Clinical laboratory testing. Susceptibility testingof fungi

CH/212

PD ISO/TR 11766Lawful Interception in ITS and CALM

EPL/278

PD ISO/TR 11769Data retention for law enforcement in ITS andCALM

EPL/278

PD ISO/TR 11773Reference materials transportation

RMI/1

BS ISO 11775Surface chemical analysis. Scanning probemicroscopy. Determination of cantilever normalspring constants

CII/60

BS ISO 11783:—Tractors and machinery for agriculture andforestry. Serial control and communicationsdata network

BS ISO 11783-4Network layer

AGE/32


PD ISO/TR 12309Health informatics. Guidelines for establishinginternational healthcare terminologystandardisation

IST/35

BS ISO 12313Colorants. Test method for the detection anddetermination of certain listed amines derivedfrom azo colorant in dyestuffs

TCI/66

BS ISO 12315Aluminium oxide primarily used for productionof aluminium. Method for calculating theAl2O3 content of smelter-grade alumina

CII/24

BS ISO 12384Aircraft. Testing requirements for characteristicsof aircraft electric power system

ACE/6

BS ISO 12385Road vehicles. Towing devices. Safety devices

AUE/8

BS ISO 12406Surface chemical analysis. Secondary ion massspectrometry. Method for depth profiling ofarsenic in silicon

CII/60

BS ISO 12505Skin barrier. Test methods

CH/173/-/3

BS ISO 12603Building construction machinery andequipment. Classification

will supersede DD 237:1996

B/513

BS ISO 12614Road vehicles. Liquefied natural gas (LNG) fuelsystem components

GSE/40

BS ISO 12617Liquefied natural gas vehicles. Connector forreflueling vehicles

GSE/40

BS ISO 12619:—Road vehicles. Compressed gaseous hydrogen(CGH2) and hydrogen/methane blends fuelcomponents

BS ISO 12619-1General requirements and definitions

GSE/40

BS ISO 12619-2Performance and general test methods

GSE/40

BS ISO 12133Small craft. Carbon monoxide detection systems

GME/33

PD ISO/TR 12134Rubber. Estimation of uncertainty for rubbertest methods. Non-functional parameters

PRI/22

DD ISO/TS 12144Nanotechnologies. Core terms. Terminology anddefinitions

NTI/1

BS ISO 12180:—Geometrical product specifications (GPS).Cylindricity

BS ISO 12180-1 (Revision)Vocabulary and parameters of cylindrical form


TDW/4

BS ISO 12180-2 (Revision)Specification operators


TDW/4

BS ISO 12181:—Geometrical product specifications (GPS).Roundness

BS ISO 12181-1 (Revision)Vocabulary and parameters of roundness


TDW/4



TDW/4

BS ISO 12204Road vehicles. Ergonomic aspects of transportinformation and control systems. Principles andguidelines for the integration of time-sensitiveand safety-critical warning signals in roadvehicles

AUE/12

BS ISO 12208Space systems. Space environment (natural andartificial). Proton (3-10 Mev) fluence estimationat Geostationary Earth Orbits (GEO) for solarpanel degradation

ACE/68/-/4

BS ISO 12219:—Indoor air. Road vehicles

BS ISO 12219-1Whole vehicle test chamber. Specification andmethod for the determination of volatileorganic compounds in car interiors

EH/2/3

BS ISO 11937:—Nanotechnologies. Nano-titanium dioxide

BS ISO 11937-1Characteristics and measurement methods

NTI/1/-/4

BS ISO 11939Standards on the measurement of anglebetween an AFM tip and surface and itscertified reference material

CII/60

BS ISO 11952Guideline for the determination of geometricalquantities using scanning probe microscopes.Calibration of measuring systems

CII/60

BS ISO 11987 (Revision)Ophthalmic optics. Contact lenses.Determination of shelf-life


CH/172/9

BS ISO 12013:—Paints and varnishes. Measurement of physicalproperties of paints on a substrate using a freedamped oscillation method

BS ISO 12013-1Measurement of curing temperature

STI/10

BS ISO 12013-2Measurement of physical properties of curedpaints

STI/10

BS ISO 12025Nanomaterials. General framework fordetermining nanoparticle content innanomaterials by generation of aerosols

NTI/1

BS ISO 12027Textiles. Cotton fibres. Determination of cottonstickiness using colour reaction

TCI/24

BS ISO 12030Tobacco and tobacco products. Non-destructivedetection of lamina density deviation in case.Ionizing radiation method

AW/40

BS ISO 12077Space systems. Space environment (natural andartificial). Trapped electron flux model forGeostationary Earth Orbits (GEO)

ACE/68/-/4

BS ISO 12108 (Revision)Metallic materials. Fatigue testing. Fatiguecrack growth method


ISE/NFE/4



BS ISO 12830Paper, board and pulps. Determination of acid-soluble magnesium, calcium, manganese, iron,copper, sodium and potassium

PAI/11

BS ISO 12842Energy performance of buildings. Definitionsand general procedures for the overall energyperformance rating and certification

B/540

DD ISO/TS 12843Nanotechnologies. Terminology for medical,health and personal care applications

NTI/1

BS ISO 12846Water quality. Determination of mercury.Method using atomic absorption spectrometry(AAS) with and without enrichment

EH/3/2

BS ISO 12869Water quality. Detection and quantification ofLegionella and/or Legionella pneumophila byconcentration and genic amplification bypolymerase chain reaction (RT-PCR)

EH/3/4

BS ISO 12875Traceability of fishery products. Specification onthe information to be recorded in captured fishdistribution chains

AW/234

BS ISO 12878Environmental monitoring of marine fish farms

AW/234

DD ISO/TS 12901:—Nanotechnologies

DD ISO/TS 12901-1Guidance on safe handling and disposal ofmanufactured nanomaterials

NTI/1

BS ISO 12914Soil quality. Microwave assisted extraction ofaqua regia soluble fraction for thedetermination of trace and major elements

EH/4

DD ISO/TS 12921Nanotechnologies. Terminology and definitionsfor nanostructured materials

NTI/1

BS ISO 12931Performance requirements for purpose-builtanti-counterfeiting tools

SSM/1/1

BS ISO 12933Agricultural tractors. Requirements for braking

AGE/6



TDW/4

BS ISO 12781:—Geometrical product specifications (GPS).Flatness

BS ISO 12781-1 (Revision)Vocabulary and parameters of flatness


TDW/4



TDW/4

BS ISO 12782:—Soil quality. Parameters for geochemicalmodelling of leaching and specification ofconstituents in soils and soil materials

BS ISO 12782-1Extraction of amorphous iron (hydr)oxides withascorbic acid

EH/4

BS ISO 12782-2Extraction of crystalline iron (hydr)oxides withdithionite

EH/4

BS ISO 12782-3Extraction of aluminium (hydr)oxides withammonium oxalate-oxalic acid

EH/4

BS ISO 12782-4Extraction of humic substances from solidsamples

EH/4

BS ISO 12782-5Extraction of humic substances from aqueoussamples

EH/4

PD ISO/TR 12802Nanotechnologies. Terminology andnomenclature. Framework

NTI/1

DD ISO/TS 12805Nanomaterials. Guidance on specifyingnanomaterials

NTI/1/-/4

DD ISO/TS 12808Nanotechnology. Terminology for the bio-nanointerface

NTI/1

BS ISO 12824Royal jelly. Specifications

AW/90

BS ISO 12619-3Pressure regulator

GSE/40

BS ISO 12670Thermal spraying. Components with thermallysprayed coatings. Technical supply conditions

STI/41

BS ISO 12671Thermal spraying. Thermally sprayed coatings.Symbolic representation on drawings

STI/41

BS ISO 12676 (Revision)Refractory products. Determination ofresistance to carbon monoxide


RPI/1

BS ISO 12679Thermal spraying. Recommendations forthermal spraying

STI/41

BS ISO 12690Thermal spraying. Thermal spray coordination.Tasks and responsibilities

STI/41

BS ISO 12705Graphic technology. Laboratory test method forchemical ghosting in lithography

PAI/43

BS ISO 12749:—Nuclear energy. Vocabulary

BS ISO 12749-1Radiation protection

NCE/2

BS ISO 12750Thermal spraying. Determination of residualstress of plasma spray ceramic coatings by x-raydiffraction method

STI/41

BS ISO 12778Vitreous and porcelain enamels. Glass linedflanged steel pipes and flanged steel fittings.Quality requirements

STI/41

BS ISO 12779Lactose. Determination of water content. KarlFischer method

AW/5

BS ISO 12780:—Geometrical product specifications (GPS).Straightness

BS ISO 12780-1 (Revision)Vocabulary and parameters of straightness


TDW/4


BS ISO 13260Thermoplastics piping systems for non pressureunderground drainage and sewerage. Testmethod for resistance to combined temperaturecycling and external loading

PRI/88/1

BS ISO 13262Thermoplastics piping systems for non pressureunderground drainage and sewerage.Thermoplastics spirally-formed structures-wallpipes. Determination of the tensile strength ofa seam

PRI/88/1

BS ISO 13263Thermoplastics piping systems for non pressureunderground drainage and sewerage.Thermoplastics fittings. Test method for impactstrength

PRI/88/1

BS ISO 13264Thermoplastics piping systems for non pressureunderground drainage and sewerage.Thermoplastics fittings. Test method formechanical strength of flexibility of fabricatedfittings

PRI/88/1

BS ISO 13265Thermoplastics piping systems for non pressureunderground drainage and sewerage. Joints forburied non-pressure applications. Test methodfor the long-term sealing performance of jointswith elastomeric seals by estimating the sealingpressure

PRI/88/1

BS ISO 13266Thermoplastics piping systems for non pressureunderground drainage and sewerage.Thermoplastics shafts or risers for inspectionchambers and manholes. Determination ofresistance against surface and traffic loading

PRI/88/1

BS ISO 13267Thermoplastics piping systems for non pressureunderground drainage and sewerage.Thermoplastics inspection chamber andmanhole bases. Test method for bucklingresistance

PRI/88/1

BS ISO 13268Thermoplastics piping systems for non pressureunderground drainage and sewerage.Thermoplastics shafts or risers for inspectionchambers and manholes. Determination of ringstiffness

PRI/88/1

BS ISO 13288Passenger car road wheels. Biaxial fatigue testmethod

AUE/4

BS ISO 13102Geometrical product specifications (GPS).Dimensional measuring equipment. Dial gauges(electronic digital). Design and metrologicalcharacteristics

TDW/4

BS ISO 13106Blow-moulded polypropylene containers forpackaging of liquid foodstuffs

PRI/75

PD ISO/TR 13121Nanotechnologies. Nanomaterial risk evaluationframework

NTI/1

BS ISO 13226 (Revision)Rubber. Standard reference elastomers (SREs)for characterizing the effect of liquids onvulcanized rubbers


PRI/22

BS ISO 13229Thermoplastics piping systems for non pressureapplications. Unplasticized poly(vinyl chloride)(PVC-U) pipes and fittings. Determination of theviscosity number and K-value

PRI/88/1

BS ISO/IEC 13249:—Information technology. Database languages.SQL multimedia and application packages

BS ISO/IEC 13249-3 (Revision)Spatial

will supersede BS ISO/IEC 13249-3:2006

IST/40

BS ISO 13254Thermoplastics piping systems for non-pressureapplications. Test method for watertightness

PRI/88/1

BS ISO 13255Thermoplastics piping systems for soil andwaste discharge inside buildings. Test methodfor airtightness of joints

PRI/88/1

BS ISO 13257Thermoplastics piping systems for non pressureapplications. Test method for resistance toelevated temperature cycling

PRI/88/1

BS ISO 13259Thermoplastics piping systems for undergroundnon pressure applications. Test method forleaktightness of elastomeric sealing ring typejoints

PRI/88/1

PD ISO/TR 12942Compressors. Classification

MCE/8

BS ISO 12951Textile floor coverings. Determination of massloss using the Lisson test

PRI/3/60

BS ISO 12962Implants for surgery. Active implantablemedical devices. Pacemaker magnet moderesponse

CH/150/6

BS ISO 13013Nanotechnologies. Terminology for nanoscalemeasurement and instrumentation

NTI/1

PD ISO/TR 13014Nanotechnologies. Guidance on physico-chemical characterization of engineerednanoscale materials for toxicologic assessment

NTI/1

PD ISO/TR 13028Information and documentation.Implementation guidelines for digitisation ofrecords

IDT/2/17

BS ISO 13029Textiles. Determination of drying rate formoisture management textile in dynamic state

TCI/66

BS ISO 13072Road vehicles. Brake lining. Shear testprocedure for disc brake pad and drum brakeshoe assemblies

AUE/11

BS ISO 13077:—Implants for surgery. Flexibility testing of spinalsegments

BS ISO 13077-1Hybrid protocol

CH/150/5

BS ISO 13081Animal and vegetable fats and oils.Determination of saponification value (SV).Indirect method-using Gas LiquidChromatography Method (GLC)

AW/307

BS ISO 13084Surface chemical analysis. Secondary ion massspectrometry. Calibration of the mass scale for atime of flight secondary ion mass spectrometer

CII/60



BS ISO 14644:—Cleanrooms and associated controlledenvironments

BS ISO 14644-1 (Revision)Classification of air cleanliness


LBI/30

BS ISO 14644-2 (Revision)Specifications for testing and monitoring toprove continued compliance with ISO 14644-1


LBI/30

BS ISO 14644-10Classification of surface chemical cleanliness

LBI/30

PD ISO/TR 14880:—Optics and photonics. Microlens arrays

PD ISO/TR 14880-5Guidance on testing

CPW/172/9

DD ISO/TS 14907:—Road transport and traffic telematics. Electronicfee collection. Test procedures for user andfixed equipment

DD ISO/TS 14907-1 (Revision)Description of test procedures


EPL/278

BS ISO 14919 (Revision)Thermal spraying, Wires, rods and cords forflame and arc spraying. Classification. Technicalsupply conditions


STI/40

BS ISO 14921 (Revision)Thermal spraying. Procedure for the applicationof thermally sprayed coatings for engineeringcomponents


STI/40

DD ISO/TS 15029:—Petroleum and related products. Determinationof spray ignition characteristics of fire-resistantfluids

DD ISO/TS 15029-3Spray tests, large scale method

PTI/13

BS ISO 14253:—Geometrical product specifications (GPS).Inspection by measurement of workpieces andmeasuring equipments

BS ISO 14253-2 (Revision)Guide to the estimation of uncertainty in GPSmeasurement, in calibration of measuringequipment and in product verification

will supersede DD ENV ISO 14253-2:2001

TDW/4

BS ISO 14253-3 (Revision)Guidelines for achieving agreements onmeasurement uncertainty statements


TDW/4

DD ISO/TS 14253:—Geometrical product specifications (GPS).Inspection by measurement of workpieces andmeasuring equipment

DD ISO/TS 14253-4Considerations for choosing decision rules

TDW/4

BS ISO 14300:—Space systems. Programme management

BS ISO 14300-2 (Revision)Product assurance


ACE/68/-/5

BS ISO 14490:—Optics and photonics. Test methods fortelescopic systems

BS ISO 14490-8Test methods for night-vision devices

CPW/172/4

BS ISO 14532 (Revision)Natural gas. Vocabulary


PTI/15

BS ISO 14572 (Revision)Road vehicles. Round, screened and unscreened,60 V and 600 V multi-core sheathed cables. Testmethods and requirements for basic and high-performance cables


AUE/16

BS ISO 14602 (Revision)Non-active surgical implants. Implants forosteosynthesis. Particular requirements


CH/150/5

BS ISO 13408:—Aseptic processing of health care products

BS ISO 13408-7Cell based health care products

CH/198

DD ISO/TS 13725 (Revision)Hydraulic fluid power. Cylinders. Method fordetermining the buckling load

will supersede BS ISO/TS 13725:2001

MCE/18/-/3

BS ISO 13849:—Safety of machinery. Safety-related parts ofcontrol systems

BS ISO 13849-2 (Revision)Validation


MCE/3

BS ISO 13960Cardiovascular implants and artificial organs.Plasma filters

CH/150/2

BS ISO 14006Environmental management systems. Guidelineson eco-design

SES/1/1

BS ISO 14045Eco-efficiency assessment. Principles andrequirements

SES/1/5

BS ISO 14051Environmental management. Material flow costaccounting. General principles and framework

SES/1

BS ISO 14223:—Radiofrequency identification of animals.Advanced transponders

BS ISO 14223-3Applications

AGE/32

BS ISO 14242:—Implants for surgery. Wear of total hip jointprostheses

BS ISO 14242-1 (Revision)Loading and displacement parameters for wear-testing machines and correspondingenvironmental conditions for test


CH/150/4


BS ISO 16000:—Indoor air

BS ISO 16000-19Sampling strategy for moulds

EH/2/3

BS ISO 16000-26Measurement strategy for carbon dioxide (CO2)

EH/2/3

BS ISO 16000-28Sensory evaluation of emissions from buildingmaterials and products

EH/2/3

BS ISO 16242Surface chemical analysis. Recording andreporting data in auger electron spectroscopy(AES)

CII/60

BS ISO 16243Surface chemical analysis. Recording andreporting data in x-ray photoelectronspectroscopy (XPS)

CII/60

BS ISO 16553 (Revision)Road vehicles. Data cables. Test methods andrequirements

will supersede DD ISO/TS 16553:2006

AUE/16

DD ISO/TS 16610:—Geometrical product specifications (GPS).Filtration

DD ISO/TS 16610-28Profile filters. End effects

TDW/4

BS ISO 16612:—Graphic technology. Variable data exchange

BS ISO 16612-2Using PDF/X-4 and PDF/X-5 (PDF/VT-1 andPDF/VT-2)

PAI/43

BS ISO 16653:—Mobile elevating work platforms. Specialfeatures. Design, calculations, safetyrequirements and test methods relative tospecial features

BS ISO 16653-3MEWPs for orchard operations

MHE/12/-/1

BS ISO 16844:—Road vehicles. Tachograph systems

BS ISO 16844-2Recording unit, electrical interface

AUE/16

BS ISO 15500-18Filter

GSE/40

BS ISO 15500-19Fittings

GSE/40

BS ISO 15501:—Road vehicles. Compressed natural gas (CNG)fuel systems

BS ISO 15501-1Safety requirements

GSE/40

DD ISO/TS 15530:—Geometrical product specifications (GPS).Coordinate measuring machines (CMM).Techniques for determining the uncertainty ofmeasurement

DD ISO/TS 15530-1Overview and metrological characteristics

TDW/4

BS ISO 15530:—Geometrical product specifications (GPS).Coordinate measuring machines (CMM).Technique for determining the uncertainty ofmeasurement

BS ISO 15530-3 (Revision)Use of calibrated workpieces or standards


TDW/4

BS ISO 15531:—Industrial automation systems and integration.Industrial manufacturing management data

BS ISO 15531-44Manufacturing management informationmodelling for shop floor data acquisition

AMT/4

BS ISO 15621 (Revision)Urine-absorbing aids. General guidance onevaluation


CH/173/-/3

BS ISO 15632 (Revision)Microbeam analysis. Instrumental specificationfor energy dispersive x-ray spectrometers withsemiconductor detectors


CII/9

BS ISO 15883:—Washer-disinfectors

BS ISO 15883-6Requirements and tests for general purposewasher-disinfector employing thermaldisinfection

CH/198

BS ISO 15156:—Petroleum and natural gas industries. Materialsfor use in H2S-containing environments in oiland gas production

BS ISO 15156-1 (Revision)General principles for selection of cracking-resistant materials


PSE/17

BS ISO 15156-2 (Revision)Cracking-resistant carbon and low alloy steels,and the use of cast irons


PSE/17

BS ISO 15156-3 (Revision)Cracking-resistant CRAs (corrosion-resistantalloys) and other alloys


PSE/17

BS ISO 15181:—Paints and varnishes. Determination of releaserate of biocides from antifouling paints

BS ISO 15181-6Determination of tralopyril release rate byquantification of its degradation product in theextract

STI/10

BS ISO 15500:—Road vehicles. Compressed natural gas (CNG)fuel system components

BS ISO 15500-3Check valve

GSE/40

BS ISO 15500-4Manual valve

GSE/40

BS ISO 15500-6Automatic valve

GSE/40

BS ISO 15500-9Pressure regulator

GSE/40

BS ISO 15500-14Excess flow valve

GSE/40

BS ISO 15500-16Rigid fuel line

GSE/40

BS ISO 15500-17Flexible fuel line

GSE/40



BS ISO 19125:—Geographic information. Simple feature access

BS ISO 19125-1 (Revision)Common architecture


IST/36

BS ISO 19125-2 (Revision)SQL option


IST/36

BS ISO 19148Geographic information. Location basedservices. Linear referencing system

IST/36

BS ISO 19156Geographic information. Observations andmeasurements

IST/36

PD ISO/TR 19201Introduction and overview about machineryvibration standards

GME/21/5

BS ISO 19272Alloyed steel. Determination of fifteenelements. Glow discharge optical emissionspectrometry

ISE/18

BS ISO/IEC 19763:—Information technology. Metamodel frameworkfor interoperability (MFI)

BS ISO/IEC 19763-5Metamodel for process model registration

IST/40

BS ISO 20152:—Timber structures. Bond performance ofadhesives

BS ISO 20152-2Additional requirements

B/518

BS ISO 21013:—Cryogenic vessels. Pilot operated pressure reliefdevices

BS ISO 21013-4Pressure-relief accessories for cryogenic service

PVE/18

BS ISO 21500Project management. Guide to projectmanagement

MS/2

BS ISO 18292Energy performance of fenestration systems.Calculation procedure

B/540/2

BS ISO 18409Hydraulic fluid power. Hose and hoseassemblies. Method of collecting a fluid samplefor analyzing the cleanliness of a hose or hoseassembly

MCE/18/-/4

BS ISO 18436:—Condition monitoring and diagnostics ofmachines. Requirements for training andcertification of personnel

BS ISO 18436-2 (Revision)Vibration condition monitoring and diagnostics


GME/21/7

BS ISO 18632Alloyed steel. Determination of manganese.Potentiometric and visual titration method

ISE/18

BS ISO 18901 (Revision)Imaging materials. Processed silver-gelatin typeblack-and-white film. Specifications for stability


CPW/42

BS ISO 18911 (Revision)Imaging materials. Processed safetyphotographic films. Storage practices


CPW/42

BS ISO 19011 (Revision)Guidelines for auditing management systems


QS/1

DD ISO/TS 19072:—Road vehicles. Connection interface forpyrotechnic devices, two-way and three-wayconnections

DD ISO/TS 19072-4Pyrotechnic device and harness connectorassembly. Type 2

AUE/16

BS ISO 19078 (Revision)Gas cylinders. Inspection of the cylinderinstallation, and requalification of high pressurecylinders for the on-board storage of naturalgas as a fuel for automotive vehicles


PVE/3/7

BS ISO 19103Geographic information. Conceptual schemalanguage

IST/36

BS ISO 16844-3Motion sensor interface

AUE/16

BS ISO/IEC 17021:—Conformity assessment

BS ISO/IEC 17021-2Requirements for third party certificationauditing of management systems

CAS/1

BS ISO 17209Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities with UN and UNF threads

MCE/18/-/5

BS ISO 17268 (Revision)Compressed hydrogen surface vehicle refuellingconnection devices


PVE/3/8

BS ISO 17450:—Geometrical product specifications (GPS).General concepts

BS ISO 17450-1 (Revision)Model for geometrical specification andverification


TDW/4

BS ISO 17450-2 (Revision)Basic tenets, specifications, operators anduncertainties

will supersede DD ISO/TS 17450-2:2002

TDW/4

BS ISO 17512:—Soil quality. Avoidance test for determining thequality of soils and effects of chemicals onbehaviour

BS ISO 17512-2Test with collembolans (Folsomia candida)

EH/4

BS ISO 17736Workplace atmospheres. Determination ofisocyanate in air using a double-filter samplingdevice and analysis by liquid chromatography

EH/2/2

BS ISO 17793Leather dress gloves. Specification

TCI/69

BS ISO 18192:—Implants for surgery. Wear of totalintervertebral spinal disc prostheses

BS ISO 18192-2Nucleus replacements

CH/150/5


BS ISO 24615Language resource management. Syntacticannotation framework

TS/1

BS ISO 24616Multi lingual information framework. Languageresource management

TS/1

BS ISO 24617:—Language resource management. Semanticannotation framework (SemAF)

BS ISO 24617-2Dialogue acts

TS/1

BS ISO 24897Steel. Determination of trace amount of oxigen.Infrared method with oxide layer subtractiontechnique

ISE/18

BS ISO 25139Stationary source emissions. Manual method forthe determination of the methaneconcentration using gas chromatography

EH/2/1

BS ISO 25178:—Geometrical product specifications (GPS).Surface texture. Areal

BS ISO 25178-7Software measurement standards

TDW/4

BS ISO 25178-603Nominal characteristics of non-contact (phaseshifting interferometric microscopy) instruments

TDW/4

BS ISO 25178-604Nominal characteristics of non-contact(coherence scanning interferometry)instruments

TDW/4

BS ISO 25539:—Cardiovascular implants. Endovascular devices

BS ISO 25539-3Vena cava filters

CH/150/2

DD ISO/TS 25740:—Safety requirements for escalators and movingwalks

DD ISO/TS 25740-1Global essential safety requirements (GESR)

MHE/4

PD ISO/TR 25743Lifts (elevators). Study into the use of lifts forevacuation during an emergency

MHE/4

DD ISO/TS 22939Soil quality. Measurement of enzyme activitypatterns in soil samples using fluorogenicsubstrates in microwell plates

EH/4

PD ISO/TR 23204Aluminium oxide primarily used for productionof aluminium. Determination of the masspercentage of particles below 20 micrometersand below 45 micrometers. Laser method

CII/24

PD ISO/TR 23605Technical product specification (TPS).Application guidance. International model fornational implementation

TDW/4

BS ISO 23611:—Soil quality. Sampling of soil invertebrates

BS ISO 23611-5Sampling and extraction of soil macro-invertebrates

EH/4

BS ISO 23611-6Guidance for the design of samplingprogrammes with soil invertebrates

EH/4

BS ISO 24114Instant coffee. Criteria for authenticity

AW/15

BS ISO 24115Green coffee. Procedure for correlation ofmoisture meters. Routine method

AW/15

BS ISO 24253:—Crop protection equipment. Spray deposit testsof field crop sprayers

BS ISO 24253-1Crop deposit measurements

AGE/15

BS ISO 24253-2Field deposit measurements

AGE/15

BS ISO 24614:—Word segmentation of written texts for mono-lingual and multi-lingual informationprocessing

BS ISO 24614-1General principles and methods

TS/1

BS ISO 24614-2Word segmentation for Chinese, Japanese andKorean

TS/1

BS ISO 21750 (Revision)Road vehicles. Safety enhancement inconjunction with tyre inflation pressuremonitoring


GSE/40

BS ISO 22008Food irradiation. Good processing practices forthe irradiation of foods intended for humanconsumption

AW/90

BS ISO 22068Sintered metal injection moulded materials.Specifications

ISE/65

BS ISO 22300Societal security. Fundamentals and vocabulary

SSM/1

BS ISO 22448Earth-moving. Theft deterrent systems.Classification and performance

B/513/1

BS ISO 22477:—Geotechnical investigation and testing. Testingof geotechnical structures

BS ISO 22477-9Phicometer shearing test

B/526/3

BS ISO 22742Packaging. Linear bar code and two-dimensional symbols for product packaging

PKW/0

DD ISO/TS 22745:—Industrial automation systems and integration.Open technical dictionaries and theirapplication to master data

DD ISO/TS 22745-40Master data representation

AMT/4

DD ISO/TS 22745-50Registration of open technical dictionaries

AMT/4

BS ISO 22846:—Personal equipment for protection against falls.Rope access systems

BS ISO 22846-2Code of practice

PH/5

BS ISO 22868 (Revision)Forestry machinery. Noise test code for portablehand-held machines with internal combustionengine. Engineering method (grade 2 accuracy)


AGE/29



BS ISO 30023Textiles. Care labelling code using symbols forworkwear to be industrially laundered

TCI/82

BS ISO 39001Road-traffic safety management systems.Requirements with guidance for use

HS/1/2

PD IEC/TR 60062:—Electrical installations in ships and mobile andfixed offshore units

PD IEC/TR 60062-370Guidance on the selection of cables fortelecommunication and data transfer includingradio-frequency cables

GEL/20/6

DD IEC/PAS 60092:—Electrical installations in ships

JPEL/18

DD IEC/PAS 60092-510Special features. High-voltage shore connectionsystems

JPEL/18

BS IEC 61881:—Railway applications. Rolling stock equipment.Capacitors for power electronics

BS IEC 61881-2Aluminium electrolytic capacitors with non solidelectrolyte and electric double layer capacitors

GEL/9/2

PD IEC/TR 62471:—Photobilogical safety of lamps and lamp systems

PD IEC/TR 62471-2Guidance on manufacturing requirementsrelating to non-laser optical safety

EPL/76

BS IEC 62618Radiation protection instrumentation.Spectroscopy-based alarming personal radiationdevices (SPRD) for detection of illicit traffickingof radioactive material

NCE/2

PD XXXXHuman resource aspects of business continuitymanagement

BCM/1

PD ISO GUIDE 31Reference materials. Contents of certificatesand labels

will supersede PD 6532-2:2000

RMI/1

PD IEC/TR 62540Radio Frequency Identification (RFID) forstationary lead-acid cells and monoblocs.Guidance and requirements

PEL/21

BS ISO 27850Tractors for agriculture and forestry. Overheadprotection. Test procedures and performancerequirements

AGE/6

BS ISO 27852Space systems. Orbit lifetime estimation

ACE/68/-/3

BS ISO 28459Earth-moving machinery. Requirements for useon the road

B/513/1

BS ISO 28581Water quality. Determination of non-polarsubstances in water. Method using gaschromatography with mass spectrometricdetection (GC-MS)

EH/3/2

BS ISO 28600Surface chemical analysis. Standard datatransfer format for scanning probe microscopy

CII/60

BS ISO 28703Fine ceramics (advanced ceramics, advancedtechnical ceramics). Test method for thermalshock resistance of porous ceramics

RPI/13

BS ISO 28901Guidance for burial of animal carcass due toepidemic

EH/4

BS ISO 29201Water quality. The variability of test results andthe uncertainty of measurement ofmicrobiological enumeration methods

EH/3/4

PD ISO/TR 29263Cereals and cereal products. Sampling studies

AW/4

DD ISO/TS 29741Biological evaluation of medical devices.Development of tolerable intake values forDi(2-ethylhexyl)phthalate (DEHP)

CH/194

BS ISO 29821:—Condition monitoring and diagnostics ofmachines. Ultrasound

BS ISO 29821-1General guidelines

GME/21/7

BS ISO 29842Sensory analysis. Methodology. Balancedincomplete block designs

AW/12

BS ISO 25832:—Implants for surgery. Seamless tubes for surgicalimplants

BS ISO 25832-1Materials based on iron

CH/150/1

BS ISO 25964:—Information and documentation

BS ISO 25964-1Thesauri and interoperability with othervocabularies

IDT/2/18

BS ISO 26101Acoustics. Test methods for the qualification offree-field environments

EH/1

PD ISO/TR 26369Cosmetics. Systematic review and evaluation ofcurrent methods used to assess photoprotection provided by sun protection products

CW/217

BS ISO 26422Petroleum and related products. Determinationof shear stability of lubricating oils containingpolymers. Four ball method using a taperedroller bearing

PTI/13

BS ISO 26900Space systems. Orbit data messages

ACE/68

PD ISO/TR 26999Intelligent Transport Systems. SystemsArchitecture. Use of ’Process OrientatedMethodology’ in ITS International Standardsand Deliverables

EPL/278

BS ISO 27026Space systems. Programme management.Project breakdown structures

ACE/68

DD ISO/TS 27265Dried milk. Enumeration of the spores ofthermophilic bacteria

AW/5

BS ISO 27307Evaluation of adhesion/cohesion of plasmasprayed ceramic coatings by scratch testing

STI/41

DD ISO/TS 27527Health informatics. Provider identification

IST/35


09/30198074 DCBS 8478 AMD1 Respiratory protective devices.Breathing gases for diving and hyperbaricapplications

PH/4/7

09/30199560 DCBS 8243 Installation and configuration ofintruder and hold-up alarm systems designed togenerate confirmed alarm conditions. Code ofpractice

GW/1/2

DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –ADOPTIONS

All Draft British Standards are availablefrom BSI Customer Services (see ’How toorder’ on page 2)

Most drafts are charged at£10.00 to members and£20.00 to non-members.

Larger draft documents are charged at ahigher price according to the number ofpages and are priced individually below.

Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL by 30 April, 2009 unlessotherwise stated, to be considered by therelevant BSI committee.

Draft standards may be modified beforeadoption and issue as British Standards.

09/19984091 DCBS EN ISO 19906 Petroleum and natural gasindustries. Arctic offshore structures£33.00 members, £66.00 non-members

B/525/12

09/30150333 DCBS ISO 23461 Space systems. Programmemanagement. Nonconformance control system

ACE/68/-/5

09/30151431 DCBS ISO 27048 Radiation protection. Doseassessment for the monitoring of workers forinternal radiation exposure

NCE/2

09/30163250 DCBS ISO 15370 Ships and marine technology.Low-location lighting on passenger ships.Arrangement

SME/32/-/1

09/30190870 DCBS 5440-2 Installation and maintenance offlues and ventilation for gas appliances of ratedinput not exceeding 70 kW net (1st, 2nd and3rd family gases). Part 2. Specification forinstallation and maintenance of ventilation forgas appliances

GSE/30

09/30193117 DCBS 4311-2 Gauge blocks manufactured toimperial specification. Part 2. Accessories

TDW/4

09/30194300 DCBS 4825-1 Stainless steel tubes and fittings forthe food industry and other hygienicapplications. Part 1. Specification for tubes

ISE/8

09/30194302 DCBS 4825-2 Stainless steel tubes and fittings forthe food industry and other hygienicapplications. Part 2. Specification for bends andtees

ISE/8

09/30194304 DCBS 4825-3 Stainless steel tubes and fittings forthe food industry and other hygienicapplications. Part 3. Specification for clamp typecouplings

ISE/8

09/30194306 DCBS 4825-4 Stainless steel tubes and fittings forthe food industry and other hygienicapplications. Part 4. Specification for threaded(IDF type) coupling

ISE/8

09/30194311 DCBS 4825-5 Stainless steel tubes and fittings forthe food industry and other hygienicapplications. Part 5. Specification for recessedring joint type couplings

ISE/8

09/30196102 DCBS SP 10 and 11 AMD2 Specification forwashers for aircraft purposes (primarily forfacing purposes)

ACE/12

09/30196104 DCBS 8461 Football goals. Code of practice fortheir procurement, installation, maintenance,storage and inspection

SW/136

09/30196106 DCBS 8462 Goals for youth football, futsal, mini-soccer and small-sided football. Specification

SW/136

09/30196108 DCBS SP 126 and 127 AMD2 Washers for unifiedhexagons for aircraft (primarily for facingpurposes)

ACE/12

DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –NATIONAL BRITISHSTANDARDS

You may now comment on any NationalBritish Standard online. BSI BritishStandards has launched a Draft Reviewsystem which allows access to the draftsof all National British Standards. Toenhance access of Drafts for PublicComment for the wider community, makecomments more visible and move intocollaborative working practices, you willnow be able to comment on any NationalBritish Standard by visitinghttp://www.bsigroup.com/drafts. Allyou need to do is register. This service isfree of charge.

Please note that the only standardsavailable on this service are pure BritishStandards (National Standards e.g:BS XXXX). European and internationaldocuments are not included at this time.

Deadlines for receipt of comments oneach of the individual drafts can be foundat http://www.bsigroup.com/drafts.The deadline for the following drafts is30 April, 2009 unless otherwise stated.

Should you wish to receive these drafts inhard copy format, they are available for afee from BSI Customer Services (see ’Howto order’ on page 2).

09/30167989 DCBS 799-5 Oil burning equipment. Part 5.Carbon steel oil storage tanks. Specification

RHE/13

09/30169955 DCBS 8511 Code of practice for the installation ofsolid fuel fired heating and cooking appliancesin recreational craft

RHE/28

09/30174849 DCBS 7985 Code of practice for the use of ropeaccess methods for industrial purposes

PH/5

09/30186666 DCBS 8522-1 Furniture removal activities.Commercial moving. Part 1. Service specification

SVS/7/2

09/30186668 DCBS 8522-2 Furniture removal activities.Commercial moving. Part 2. Provision of theservice

SVS/7/2

Draft British Standards For Public Comment


09/30178331 DCBS EN 1870-7 AMD1 Safety of woodworkingmachines. Circular sawing machines. Part 7.Single blade log sawing machines withintegrated feed table and manual loadingand/or unloading

MTE/23

Comments for the above document are required by31 May, 2009

09/30178334 DCBS EN 1870-8 AMD1 Safety of woodworkingmachines. Circular sawing machines. Part 8.Single blade edging circular rip sawingmachines with power driven saw unit andmanual loading and/or unloading

MTE/23


09/30178366 DCBS EN 848-3 AMD1 Safety of woodworkingmachines. One side moulding machines withrotating tools. Part 3. Numerically controlled(NC) boring and routing machines

MTE/23


09/30178369 DCBS EN 940 AMD1 Safety of woodworkingmachines. Combined woodworking machines

MTE/23

09/30178372 DCBS EN 1218-1 AMD1 Safety of woodworkingmachines. Tenoning machines. Part 1. Singleend tenoning machines with sliding table

MTE/23

09/30178385 DCBS EN 1218-5 AMD1 Safety of woodworkingmachines. Tenoning machines. Part 5. One sideprofiling machines with fixed table and feedrollers or feed chain

MTE/23


09/30178388 DCBS EN 12750 AMD1 Safety of woodworkingmachines. Four-sided moulding machines

MTE/23

09/30178391 DCBS EN 12779 AMD1 Safety of woodworkingmachines. Chip and dust extraction systems withfixed installation. Safety related performancesand safety requirements

MTE/23

09/30178783 DCBS EN 62509 Performance and functioning ofphotovoltaic battery charge controllers

GEL/82

09/30173908 DCBS EN 13477-2 Non-destructive testing.Acoustic emission. Equipment characterization.Part 2. Verification of operating characteristics

WEE/46

09/30174252 DCBS EN 62562 Cavity resonator method tomeasure the complex permittivity of low-lossdielectric plates

EPL/46/2

09/30175723 DCBS ISO 28560-1 Information anddocumentation. RFID in libraries. Part 1. Generalrequirements and data elements

IDT/2/7

09/30175726 DCBS ISO 28560-2 Information anddocumentation. RFID in libraries. Part 2.Encoding based on ISO/IEC 15962

IDT/2/7

09/30175729 DCBS ISO 28560-3 Information anddocumentation. RFID in libraries. Part 3. Fixedlength encoding

IDT/2/7

09/30176076 DCBS EN 280 AMD2 Mobile elevating workplatforms. Design calculations. Stability criteria.Construction. Safety. Examination and tests

MHE/12

09/30177494 DCBS EN 14238 AMD1 Cranes. Manuallycontrolled load manipulating devices

MHE/3

09/30178296 DCBS EN 860 AMD1 Safety of woodworkingmachines. One side thickness planing machines

MTE/23

09/30178310 DCBS EN 1807 AMD1 Safety of woodworkingmachines. Band sawing machines

MTE/23


09/30178322 DCBS EN 1870-4 AMD1 Safety of woodworkingmachines. Circular sawing machines. Part 4.Multiblade rip sawing machines with manualloading and/or unloading

MTE/23

09/30178325 DCBS EN 1870-5 AMD1 Safety of woodworkingmachines. Circular sawing machines. Part 5.Circular sawbenches/up-cutting cross-cut sawingmachines

MTE/23


09/30163833 DCBS ISO 29861 Document managementapplications. Quality control for scanning officedocuments in colour

IDT/1/1

09/30167386 DCBS EN ISO 17573 Electronic fee collection.Systems architecture for vehicle related tolling

EPL/278

09/30168253 DCBS IEC 62533 Radiation protectioninstrumentation. Highly sensitive hand-heldinstruments for photon detection of radioactivematerial

NCE/2


09/30168526 DCBS ISO/IEC 27033-1 Information technology.Security techniques. Network security. Part 1.Guidelines for network security

IST/33

09/30168835 DCBS EN ISO 7885 Dentistry. Sterile injectionneedles for single use

CH/106/4


09/30168902 DCBS ISO 27020 Dentistry. Brackets and tubes foruse in orthodontics

CH/106/1

09/30171027 DCBS ISO 11171 Hydraulic fluid power.Calibration of automatic particle counters forliquids

MCE/18/-/6

09/30171916 DCBS EN ISO 9239-1 Reaction to fire tests forfloorings. Part 1. Determination of the burningbehaviour using a radiant heat source

FSH/21

09/30171920 DCBS EN ISO 11925-2 Reaction to fire tests.Ignitability of building products subjected todirect impingement of flame. Part 2. Single-flame source test

FSH/21

09/30173298 DCBS EN 81-21 Safety rules for the constructionand installation of lifts. Lifts for the transport ofpersons and goods. Part 21. New passenger andgoods passenger lifts in existing buildings

MHE/4



09/30186636 DCBS EN ISO 9241-210 Ergonomics of human-system interaction. Part 210. Human-centreddesign for interactive systems

PH/9

Comments for the above document are required by31 March, 2009

09/30186950 DCBS EN 1782 AMD1 Tracheal tubes andconnectors

CH/121/5

09/30186956 DCBS EN 12342 AMD1 Breathing tubes intendedfor use with anaesthetic apparatus andventilators

CH/121/5


09/30187082 DCBS EN 60958-3 AMD1 Digital audio interface.Part 3. Consumer application

EPL/100


09/30188434 DCBS EN 598 AMD1 Ductile iron pipes, fittings,accessories and their joints for sewerageapplications. Requirements and test methods

PSE/10


09/30188761 DCBS ISO/IEC 29143 Information technology.Automatic identification and data capturetechniques. Air interface specification forMobile RFID interrogators

IST/34

09/30189572 DCBS EN 12864 AMD3 Low-pressure, nonadjustable regulators having a maximum outletpressure of less than or equal to 200 mbar, witha capacity of less than or equal to 4 kg/h, andtheir associated safety devices for butane,propane or their mixtures

GSE/24


09/30189968 DCBS EN 13544-1 AMD1 Respiratory therapyequipment. Part 1. Nebulizing systems and theircomponents

CH/121

09/30190478 DCBS EN 1147 Portable ladders for fire service use

FSH/17/5

09/30190483 DCBS EN 15767-3 Portable equipment forprojecting extinguishing agents supplied by firefighting pumps. Portable monitors. Part 3. Foamdevices

FSH/17/1

09/30181566 DCBS ISO 29481-1 Building information models.Information delivery manual. Part 1.Methodology and format

B/555

09/30181658 DCBS EN 13157 AMD1 Cranes. Safety. Handpowered lifting equipment

MHE/3

09/30182290 DCBS EN 746-1 AMD1 Industrialthermoprocessing equipment. Part 1. Commonsafety requirements for industrialthermoprocessing equipment

MCE/3/8

09/30182344 DCBS EN 1953 AMD1 Atomising and sprayingequipment for coating materials. Safetyrequirements

MCE/3/8


09/30182353 DCBS EN 12215 AMD1 Coating plants. Spraybooths for application of organic liquid coatingmaterials. Safety requirements

MCE/3/8

09/30184056 DCBS ISO 10845-1 Construction procurement.Part 1. Processes, methods and procedures£18.00 members, £36.00 non-members

CB/100

09/30184131 DCBS ISO 29081 Surface chemical analysis. Augerelectron spectroscopy. Reporting of methodsused for charge control and charge correction

CII/60

09/30184534 DCBS ISO/IEC 20000-1 Information technology.Service management. Part 1. Servicemanagement system requirements

IST/15/-/8

09/30185912 DCBS EN 843-6 Advanced technical ceramics.Mechanical properties of monolithic ceramics atroom temperature. Part 6. Guidance forfractographic investigation

RPI/13

09/30185951 DCBS EN 15889 Fire-fighting hoses. Test methods

FSH/17/6

09/30186448 DCBS EN 13941 Design and installation ofpreinsulated bonded pipe systems for districtheating£18.00 members, £36.00 non-members

RHE/9


09/30178870 DCBS ISO 10638 Raw rubber, latex, rubbercompounds and rubber products. Identificationof antidegradants by gas chromatography/massspectrometry

PRI/23

09/30179758 DCBS EN 12044 AMD1 Footwear, leather andimitation leather goods manufacturingmachines. Cutting and punching machines.Safety requirements

MCE/3/12

09/30179761 DCBS EN 930 AMD2 Footwear, leather andimitation leather goods manufacturingmachines. Roughing, scouring, polishing andtrimming machines. Safety requirements

MCE/3/12

09/30179764 DCBS EN 931 AMD2 Footwear manufacturingmachines. Lasting machines. Safetyrequirements

MCE/3/12

09/30179767 DCBS EN 12653 AMD2 Footwear, leather andimitation leather manufacturing machines.Nailing machines. Safety requirements

MCE/3/12

09/30179773 DCBS EN 12387 AMD1 Footwear, leather andimitation leather goods manufacturingmachines. Modular shoe repair equipment.Safety requirements

MCE/3/12

09/30179776 DCBS EN 12203 AMD1 Footwear, leather andimitation leather goods manufacturingmachines. Shoe and leather presses. Safetyrequirements

MCE/3/12

09/30180272 DCBS EN 934-3 Admixtures for concrete, mortarand grout. Part 3. Admixtures for masonrymortar. Definitions, requirements, conformity,marking and labelling

B/517/3

09/30181168 DCBS EN 1047-2 Secure storage units.Classification and methods of test for resistanceto fire. Part 2. Data rooms and data container

GW/2

09/30181283 DCBS ISO/IEC 24727-6 Identification cards.Integrated circuit card programming interfaces.Part 6. Registration authority procedures for theauthentication protocols for interoperability

IST/17


Draft British Standards For Public Comment continued...


09/30192353 DCBS EN 12470-3 AMD1 Clinical thermometers.Part 3. Performance of compact electricalthermometers (non-predictive and predictive)with maximum device

LBI/36/3


09/30192356 DCBS EN 12470-4 AMD1 Clinical thermometers.Part 4. Performance of electrical thermometersfor continuous measurement

LBI/36/3


09/30192362 DCBS EN 15892 Railway applications. Noiseemission. Measurement of noise inside driver’scabs

RAE/1

09/30192433 DCBS ISO 21581 Timber structures. Static andcyclic lateral load test method for shear walls

B/518

09/30192729 DCBS EN 15643-2 Sustainability of constructionworks. Assessment of buildings. Part 2.Framework for the assessment ofenvironmental performance

B/558

09/30192733 DCBS EN 15643-1 Sustainability of constructionworks. Assessment of buildings. Part 1. Generalframework

B/558

09/30192761 DCBS EN 115-2 Safety of escalators and movingwalks. Part 2. Rules for the improvement ofsafety of existing escalators and moving walks

MHE/4

09/30192797 DCBS ISO 27875 Space systems. Re-entry riskmanagement for unmanned spacecraft andlaunch vehicle orbital stages

ACE/68/-/3

Comments for the above document are required by6 April, 2009

09/30192810 DCBS ISO 10816-2 Mechanical vibration.Evaluation of machine vibration bymeasurements on non-rotating parts. Part 2.Land-based steam turbines and generators inexcess of 50 MW with normal operating speedsof 1500 r/min, 1800 r/min, 3000 r/min and 3600r/min

GME/21/5

09/30192939 DCBS EN 60811-100 Electric and optical fibrecables. Test methods for non-metallic materials.Part 100. General

GEL/20/17

09/30191982 DCBS ISO 21748 Guidance for the use ofrepeatability, reproducibility and truenessestimates in measurement uncertaintyestimation

SS/6

09/30192027 DCBS EN 299 Oil pressure atomizing nozzles.Determination of the angle and spraycharacteristics

GSE/27

09/30192039 DCBS EN 794-3 AMD2 Lung ventilators. Part 3.Particular requirements for emergency andtransport ventilators

CH/121/5

09/30192042 DCBS EN 13544-2 AMD1 Respiratory therapyequipment. Part 2. Tubing and connectors

CH/121/5


09/30192045 DCBS EN 13544-3 AMD1 Respiratory therapyequipment. Part 3. Air entrainment devices

CH/121/5


09/30192126 DCBS ISO/IEC 15444-3 AMD1 Informationtechnology. Part 3. JPEG 2000 image codingsystem. Motion JPEG 2000

IST/37

09/30192128 DCBS ISO/IEC 15444-9 AMD4 Informationtechnology. Part 9. JPEG 2000 image codingsystem. Interactivity tools, APIs and protocols

IST/37

09/30192332 DCBS EN 31 Wash basins. Connecting dimensions

B/503

09/30192335 DCBS EN 33 WC pans and WC suites. Connectingdimensions

B/503

09/30192350 DCBS EN 12470-2 AMD1 Clinical thermometers.Part 2. Phase change type (dot matrix)thermometers

LBI/36/3


09/30190527 DCBS ISO 26162 Systems to manage terminology,knowledge and content. Design,implementation and maintenance ofterminology management systems

TS/1

09/30190935 DCBS ISO 10872 Water quality. Determination ofthe toxic effect of sediment and soil samples ongrowth, fertility and reproduction ofCaenorhabditis elegans (Nematoda)

EH/3/5

09/30190938 DCBS ISO 7919-4 Mechanical vibration. Evaluationof machine vibration by measurements onrotating shafts. Part 4. Gas turbine sets withfluid-film bearings

GME/21/5

09/30190941 DCBS ISO 10816-4 Mechanical vibration.Evaluation of machine vibration bymeasurements on non-rotating parts. Part 4.Gas turbine sets with fluid-film bearings

GME/21/5

09/30191126 DCBS EN 62132-8 Integrated circuits.Measurement of electromagnetic immunity.Part 8. Measurement of radiated immunity. ICStripline method

EPL/47


09/30191130 DCBS EN 61967-8 Integrated circuits.Measurement of electromagnetic emissions.Part 8. Measurement of radiated emissions. ICStripline method

EPL/47


09/30191459 DCBS ISO 16063-41 Methods for the calibrationof vibration and shock transducers. Part 41.Calibration of laser vibrometers

GME/21/2


09/30191612 DCBS ISO 16992 Passenger car tyres. Spare unitsubstitutive equipment (SUSE)

AUE/4

09/30191937 DCBS ISO 20152-1 Timber structures. Bondperformance of adhesives. Part 1. Basicrequirements

B/518



09/30193023 DCBS EN 60811-503 Electric and optical fibrecables. Test methods for non-metallic materials.Part 503. Mechanical tests. Shrinkage test forsheaths

GEL/20/17

09/30193027 DCBS EN 60811-504 Electric and optical fibrecables. Test methods for non-metallic materials.Part 504. Mechanical tests. Bending tests at lowtemperature for insulation and sheaths

GEL/20/17

09/30193031 DCBS EN 60811-505 Electric and optical fibrecables. Test methods for non-metallic materials.Part 505. Mechanical tests. Elongation at lowtemperature for insulations and sheaths

GEL/20/17

09/30193035 DCBS EN 60811-506 Electric and optical fibrecables. Test methods for non-metallic materials.Part 506. Mechanical tests. Impact test at lowtemperature for insulations and sheaths

GEL/20/17

09/30193039 DCBS EN 60811-507 Electric and optical fibrecables. Test methods for non-metallic materials.Part 507. Mechanical tests. Hot set test for cross-linked materials

GEL/20/17

09/30193047 DCBS EN 60811-508 Electric and optical fibrecables. Test methods for non-metallic materials.Part 508. Mechanical tests. Pressure test at hightemperature for insulation and sheaths

GEL/20/17

09/30193051 DCBS EN 60811-509 Electric and optical fibrecables. Test methods for non-metallic materials.Part 509. Mechanical tests. Test for resistance ofinsulations and sheaths to cracking

GEL/20/17

09/30193055 DCBS EN 60811-510 Electric and optical fibrecables. Test methods for non-metallic materials.Part 510. Mechanical tests. Methods specific topolyethylene and polypropylene compounds.Wrapping test after thermal ageing in air

GEL/20/17

09/30193059 DCBS EN 60811-511 Electric and optical fibrecables. Test methods for non-metallic materials.Part 511. Mechanical tests. Measurement of themelt flow index of polyethylene andpolypropylene compounds

GEL/20/17

09/30192986 DCBS EN 60811-406 Electric and optical fibrecables. Test methods for non-metallic materials.Part 406. Environmental tests. Resistance toenvironmental stress cracking of polyethyleneand polypropylene compounds

GEL/20/17

09/30192990 DCBS EN 60811-407 Electric and optical fibrecables. Test methods for non-metallic materials.Part 407. Environmental tests. Measurement ofmass increase of polyethylene andpolypropylene compounds

GEL/20/17

09/30192994 DCBS EN 60811-408 Electric and optical fibrecables. Test methods for non-metallic materials.Part 408. Environmental tests. Long termstability test of polyethylene and polypropylenecompounds

GEL/20/17

09/30192998 DCBS EN 60811-409 Electric and optical fibrecables. Test methods for non-metallic materials.Part 409. Environmental tests. Loss of mass testfor thermoplastic insulations and sheaths

GEL/20/17

09/30193002 DCBS EN 60811-410 Electric and optical fibrecables. Test methods for non-metallic materials.Part 410. Environmental tests. Test method forcopper-catalyzed oxidative degradation ofpolyolefin insulated conductors

GEL/20/17

09/30193006 DCBS EN 60811-411 Electric and optical fibrecables. Test methods for non-metallic materials.Part 411. Environmental tests. Low temperaturebrittleness of filling compounds

GEL/20/17

09/30193010 DCBS EN 60811-412 Electric and optical fibrecables. Test methods for non-metallic materials.Part 412. Environmental tests. Thermal ageingmethods. Ageing in an air bomb

GEL/20/17

09/30193015 DCBS EN 60811-501 Electric and optical fibrecables. Test methods for non-metallic materials.Part 501. Mechanical tests. Tests fordetermining the mechanical properties ofinsulating and sheathing compounds

GEL/20/17

09/30193019 DCBS EN 60811-502 Electric and optical fibrecables. Test methods for non-metallic materials.Part 502. Mechanical tests. Shrinkage test forinsulations

GEL/20/17

09/30192943 DCBS EN 60811-201 Electric and optical fibrecables. Test methods for non-metallic materials.Part 201. General tests. Measurement ofinsulation thickness

GEL/20/17

09/30192947 DCBS EN 60811-202 Electric and optical fibrecables. Test methods for non-metallic materials.Part 202. General tests. Measurement ofthickness of non-metallic sheath

GEL/20/17

09/30192954 DCBS EN 60811-203 Electric and optical fibrecables. Test methods for non-metallic materials.Part 203. General tests. Measurement of overalldimensions

GEL/20/17

09/30192958 DCBS EN 60811-301 Electric and optical fibrecables. Test methods for non-metallic materials.Part 301. Electrical tests. Measurement of thepermittivity at 23°C of filling compounds

GEL/20/17

09/30192962 DCBS EN 60811-302 Electric and optical fibrecables. Test methods for non-metallic materials.Part 302. Electrical tests. Measurement of theD.C. resistivity at 23°C and 100°C of fillingcompounds

GEL/20/17

09/30192966 DCBS EN 60811-401 Electric and optical fibrecables. Test methods for non-metallic materials.Part 401. Environmental tests. Thermal ageingmethods. Ageing in an air oven

GEL/20/17

09/30192970 DCBS EN 60811-402 Electric and optical fibrecables. Test methods for non-metallic materials.Part 402. Environmental tests. Water absorptiontests

GEL/20/17

09/30192974 DCBS EN 60811-403 Electric and optical fibrecables. Test methods for non-metallic materials.Part 403. Environmental tests. Ozone resistancetest on elastomeric compounds

GEL/20/17

09/30192978 DCBS EN 60811-404 Electric and optical fibrecables. Test methods for non-metallic materials.Part 404. Environmental tests. Mineral oilimmersion tests for sheaths made withelastomeric compounds

GEL/20/17

09/30192982 DCBS EN 60811-405 Electric and optical fibrecables. Test methods for non-metallic materials.Part 405. Environmental tests. Thermal stabilitytest for PVC insulations and PVC sheaths

GEL/20/17



09/30194061 DCBS ISO 8721 Road vehicles. Measurementtechniques in impact tests. Opticalinstrumentation

AUE/7


09/30194359 DCBS EN 60034-18-34 Rotating electricalmachines. Part 18-34. Functional evaluation ofinsulation systems. Test procedures for form-wound windings. Evaluation ofthermomechanical endurance of insulationsystems

PEL/2


09/30194936 DCBS EN ISO 28460 Petroleum and natural gasindustries. Installation and equipment forliquefied natural gas. Ship-to-shore interfaceand port operations

PSE/17/-/7

09/30194939 DCBS ISO 12640-4 Graphic technology. Prepressdigital data exchange. Part 4. Wide gamutdisplay-referred standard colour image data[Adobe RGB (1998)/SCID]

PAI/43


09/30194943 DCBS EN ISO 225 Fasteners. Bolts, screws, studsand nuts. Symbols and designations ofdimensions

FME/9/2

09/30195262 DCBS ISO 12439 Mixing water for concrete

B/517

09/30195609 DCBS EN 15890 Foodstuffs. Determination ofpatulin in fruit juice and fruit based puree foryoung children. HPLC method with liquid/liquidpartition cleanup and solid phase extractionand UV detection

AW/-/3

09/30196632 DCBS EN 4325 Aerospace series. Steel FE-WM3504 (X4CrNiMo16-5-1). Air melted. Filller metalfor welding

ACE/61/-/15


09/30196635 DCBS EN 60092-510 Electrical installations inships. Part 510. Special features. High VoltageShore Connection Systems (HVSC-Systems)

JPEL/18


09/30193349 DCBS ISO 11476 Paper and board. Determinationof CIE-whiteness, C/2° (indoor illuminationconditions)

PAI/11


09/30193379 DCBS ISO 813 Rubber, vulcanized orthermoplastic. Determination of adhesion to arigid substrate. 90° peel method

PRI/22


09/30193698 DCBS EN 14080 Timber structures. Gluedlaminated timber and glued laminated solidtimber. Requirements

B/518

09/30193701 DCBS EN 15898 Conservation of cultural property.Main general terms and definitions concerningconservation of cultural property

B/560

09/30193875 DCBS EN ISO 11953 Dentistry. The performanceof hand torque instruments for the clinicaltightening of screw-retained joints inendosseous dental implant systems

CH/106/8

09/30193885 DCBS EN 861 AMD1 Safety of woodworkingmachines. Surface planing and thicknessingmachines

MTE/23

09/30194017 DCBS EN 480-10 Admixtures for concrete, mortarand grout. Test methods. Part 10.Determination of water soluble chloridecontent

B/517/3

09/30194024 DCBS EN 15912 Durability of reaction to fireperformances. Classes of fire retardant treatedwood-based product in interior and exteriorend use applications

B/543


09/30194058 DCBS ISO 27955 Road vehicles. Securing of cargoin passenger cars, station wagons and multi-purpose vehicles. Requirements and testmethods

AUE/7


09/30193063 DCBS EN 60811-512 Electric and optical fibrecables. Test methods for non-metallic materials.Part 512. Mechanical tests. Tensile strength andelongation at break after conditioning atelevated temperature. Methods specific topolyethylene and polypropylene compounds

GEL/20/17

09/30193067 DCBS EN 60811-513 Electric and optical fibrecables. Test methods for non-metallic materials.Part 513. Mechanical tests. Methods specific topolyethylene and polypropylene compounds.Wrapping test after conditioning

GEL/20/17

09/30193071 DCBS EN 60811-601 Electric and optical fibrecables. Test methods for non-metallic materials.Part 601. Physical tests. Measurement of thedrop-point of filling compounds

GEL/20/17

09/30193075 DCBS EN 60811-602 Electric and optical fibrecables. Test methods for non-metallic materials.Part 602. Physical tests. Separation of oil infilling compounds

GEL/20/17

09/30193079 DCBS EN 60811-603 Electric and optical fibrecables. Test methods for non-metallic materials.Part 603. Physical tests. Measurement of totalacid number of filling compounds

GEL/20/17

09/30193083 DCBS EN 60811-604 Electric and optical fibrecables. Test methods for non-metallic materials.Part 604. Physical tests. Measurement ofabsence of corrosive components in fillingcompounds

GEL/20/17

09/30193087 DCBS EN 60811-605 Electric and optical fibrecables. Test methods for non-metallic materials.Part 605. Physical tests. Measurement of carbonblack and/or mineral filler in polyethylenecompounds

GEL/20/17

09/30193091 DCBS EN 60811-606 Electric and optical fibrecables. Test methods for non-metallic materials.Part 606. Physical tests. Methods fordetermining the density

GEL/20/17

09/30193095 DCBS EN 60811-607 Electric and optical fibrecables. Test methods for non-metallic materials.Part 607. Physical test. Test for the assessmentof carbon black dispersion in Polyethylene andPolypropylene

GEL/20/17


09/30198263 DCBS EN 61837-1 Surface mounted piezoelectricdevices for frequency control and selection.Standard outlines and terminal leadconnections. Part 1. Plastic moulded enclosureoutlines

EPL/49


09/30198396 DCBS EN 61784-2 Industrial communicationnetworks. Profiles. Part 2. Additional fieldbusprofiles for real-time networks based on ISO/IEC8802-3£18.00 members, £36.00 non-members

AMT/7


09/30198404 DCBS EN 61784-1 Industrial communicationnetworks. Profiles. Part 1. Fieldbus profiles£33.00 members, £66.00 non-members

AMT/7


09/30198417 DCBS EN 60505 Evaluation and qualification ofelectrical insulation systems

GEL/112


09/30198606 DCBS EN 60332-3-10 Tests on electric and opticalfibre cables under fire conditions. Part 3-10.Test for vertical flame spread of vertically-mounted bunched wires or cables. Apparatus

GEL/20/18

09/30198609 DCBS EN 60332-3-21 Tests on electric cablesunder fire conditions. Part 3-21. Test for verticalflame spread of vertically-mounted bunchedwires or cables. Category A F/R

GEL/20/18

09/30198613 DCBS EN 60332-3-22 Tests on electric and opticalfibre cables under fire conditions. Part 3-22.Test for vertical flame spread of vertically-mounted bunched wires or cables. Category A

GEL/20/18

09/30198617 DCBS EN 60332-3-23 Tests on electric and opticalfibre cables under fire conditions. Part 3-23.Test for vertical flame spread of vertically-mounted bunched wires or cables. Category B

GEL/20/18

09/30198621 DCBS EN 60332-3-24 Tests on electric and opticalfibre cables under fire conditions. Part 3-24.Test for vertical flame spread of vertically-mounted bunched wires or cables. Category C

GEL/20/18

09/30197921 DCBS EN 62561-4 Requirements for LightningProtection System Components (LPSC). Part 4.Requirements for fasteners

GEL/81

09/30197925 DCBS EN 4641-301 Aerospace series. Cables,optical 125µm diameter cladding. Part 301.Tight structure 50-125µm GI fibre nominal 1.8 mm Outside Diameter. Product Standard

ACE/6


09/30197946 DCBS EN ISO 8536-3 Infusion equipment formedical use. Part 3. Aluminium caps for infusionbottles

CH/212

09/30198139 DCBS EN 61400-1 AMD1 Wind turbines. Part 1.Design requirements

PEL/88

09/30198228 DCBS EN 15891 Foodstuffs. Determination ofdeoxynivalenol in cereals, cereal products andcereal based foods for infants and youngchildren. HPLC method with immunoaffinitycolumn cleanup and UV detection

AW/-/3

09/30198231 DCBS EN 62561-7 Requirements for LightningProtection System Components (LPSC). Part 7.Requirements for earthing enhancingcompounds

GEL/81

09/30198252 DCBS EN 12470-1 AMD1 Clinical thermometers.Part 1. Metallic liquid-in-glass thermometerswith maximum device

LBI/36/3


09/30198254 DCBS EN 60368-3 Piezoelectric filters of assessedquality. Part 3. Standard outlines and leadconnections

EPL/49


09/30198258 DCBS EN 60679-3 Quartz crystal controlledoscillators of assessed quality. Part 3. Standardoutlines and lead connections

EPL/49


09/30196776 DCBS EN ISO 11161 AMD1 Safety of machinery.Integrated manufacturing systems. Basicrequirements

MCE/3


09/30196780 DCBS ISO 12493 Rubber, vulcanized.Determination of stress in tension on heating

PRI/22

09/30197413 DCBS EN 50411-3-2 Fibre organisers and closuresto be used in optical fibre communicationsystems. Product specifications. Part 3-2.Singlemode mechanical fibre splice

GEL/86/2

09/30197559 DCBS EN 60794-3-11 Optical fibre cables. Part 3-11. Outdoor cables. Product specification forduct and directly buried single-mode opticalfibre telecommunication cables

GEL/86/1


09/30197676 DCBS IEC 61810-2-1 Electromechanicalelementary relays. Part 2-1. Reliability.Procedure for the verification of B10 values

EPL/94


09/30197751 DCBS EN 4678 Aerospace series. Weldments andbrazements for aerospace structures. Joints ofmetallic materials by laser beam welding.Quality of weldments

ACE/61/-/2


09/30197816 DCBS ISO 10816-1 AMD1 Mechanical vibration.Evaluation of machine vibration bymeasurements on non-rotating parts. Part 1.General guidelines

GME/21/5


09/30197819 DCBS ISO 2631-1 AMD1 Mechanical vibration andshock. Evaluation of human exposure to whole-body vibration. Part 1. General requirements

GME/21/6


09/30197862 DCBS EN 62616 Maritime navigation andradiocommunication equipment and systems.Bridge navigational watch alarm system(BNWAS). Performance requirements, methodsof testing and required test results

EPL/80



09/30199378 DCBS EN 60061 Lamp caps and holders togetherwith gauges for the control ofinterchangeability and safety. Part 1. Lampcaps. Amendment 43. Part 2. Lampholders.Amendment 40. Part 3. Gauges. Amendment 41

CPL/34/2


09/30199438 DCBS EN 60112 AMD1 Method for thedetermination of the proof and thecomparative tracking indices of solid insulatingmaterials

GEL/112


DOCUMENTS NOT ISSUEDAS DPCs

Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000

EN 908:1999/Amendment 1Agricultural and forestry machinery. Reelmachines for irrigation. Safety

EN 909:1998/Amendment 1Agricultural and forestry machinery. Centrepivot and moving lateral types irrigationmachines. Safety

The above have been circulated under UAPprocedure. Copies of the drafts are available onrequest from the contact point (below).Contact: Committee Service CentreEmail: [email protected]

AGE/30

ISO/DIS 2076Textiles. Man-made fibres. Generic names

This document has been circulated for the DraftInternational Standard Vote. Please return anycomments to the Programme Manager (below)by 13 March, 2009.Contact: Eddie LevioEmail: [email protected]

TCI/24

ISO/FDIS 9125Fibre-cement slates and fittings. Productspecification and test methods

A copy of the above document is available fromthe contact point (below).Contact: Committee Service CentreEmail: [email protected]

B/3

09/30199064 DCBS EN 62364 Hydraulic machines. Guide fordealing with abrasive erosion in water

MCE/15


09/30199080 DCBS EN 4023 Aerospace series. Pipe coupling8°30’ in titanium alloy. Elbows 45°

ACE/69

09/30199086 DCBS EN ISO 105-C08 Textiles. Tests for colourfastness. Part C08. Colour fastness to domesticand commercial laundering using a non-phosphate reference detergent incorporating alow temperature bleach activator

TCI/81

09/30199092 DCBS EN 4025 Aerospace series. Pipe coupling8°30’ in titanium alloy. Elbows 45°, bulkhead

ACE/69

09/30199116 DCBS EN 4184 Aerospace series. Pipe coupling8°30’ in titanium alloy. Elbows 45°, weldedends, double

ACE/12

09/30199215 DCBS EN 60793-1-31 Optical fibres. Part 1-31.Measurement methods and test procedures.Tensile strength

GEL/86/1


09/30199219 DCBS EN 60793-1-32 Optical fibres. Part 1-32.Measurement methods and test procedures.Coating strippability

GEL/86/1


09/30199223 DCBS EN 60876-1 Fibre optic interconnectingdevices and passive components. Fibre opticspatial switches. Part 1. Generic specification

GEL/86/2


09/30199239 DCBS ISO/IEC 25045 Software engineering.Software product Quality Requirements andEvaluation (SQuaRE). Evaluation Module forRecoverability

IST/15


09/30198647 DCBS EN 60335-2-4 AMD Household and similarelectrical appliances. Safety. Part 2-4. Particularrequirements for spin extractors

CPL/61/14

09/30198650 DCBS EN 62329-3-102 Heat shrinkable mouldedshapes. Part 3. Specification requirements forshape dimensions, material requirements andcompatibility performance. Sheet 102. Heat-shinkable elastomeric moulded shapes, semi-rigid, material requirements and systemperformance

GEL/15/5

09/30198654 DCBS EN 60335-2-7 AMD Household and similarelectrical appliances. Safety. Part 2-7. Particularrequirements for washing machines

CPL/61/14

09/30198664 DCBS ISO/IEC 15421 Information technology.Automatic identification and data capturetechniques. Bar code master test specifications

IST/34

09/30198671 DCBS EN 60332-3-25 Tests on electric and opticalfibre cables under fire conditions. Part 3-25.Test for vertical flame spread of vertically-mounted bunched wires or cables. Category D

GEL/20/18

09/30198786 DCBS EN 6049-008 Aerospace series. Electricalcables, installation. Protection sleeve in meta-aramid fibres. Part 008. Self-wrapping shielded(EMI) protective sleeve with nickel copper braid,Flexible post installation operating temperaturefrom 55°C to 200°C. Product standard

ACE/6

09/30198956 DCBS EN 2997-016 Aerospace series. Connectors,electrical, circular, coupled by threaded ring,fire-resistant or non fire-resistant, operatingtemperatures 65°C to 175°C continuous, 200°Ccontinuous, 260°C peak. Part 016. Plug withintegrated accessory. Product standard

ACE/6

09/30198997 DCBS EN 2997-015 Aerospace series. Connectors,electrical, circular, coupled by threaded ring,fire-resistant or non fire-resistant, operatingtemperatures 65°C to 175°C continuous, 200°Ccontinuous, 260°C peak. Part 015. Jam-nutmounted receptacle with integrated accessory.Product standard

ACE/6

09/30199020 DCBS EN 2997-014 Aerospace series. Connectors,electrical, circular, coupled by threaded ring,fire-resistant or non fire-resistant, operatingtemperatures 65°C to 175°C continuous, 200°Ccontinuous, 260°C peak. Part 014. Square flangereceptacle with integrated accessory. Productstandard

ACE/6


EN 334:2005+A1:2009Gas pressure regulators for inlet pressures up to100 bar

GSE/32

EN 419:—Non-domestic gas-fired overhead luminousradiant heaters

EN 419-1:2009Safety

GSE/20

EN 902:2009Chemicals used for treatment of water intendedfor human consumption. Hydrogen peroxide

CII/59

EN 938:2009Chemicals used for treatment of water intendedfor human consumption. Sodium chlorite

CII/59

EN 939:2009Chemicals used for treatment of water intendedfor human consumption. Hydrochloric acid

CII/59

EN 1143:—Secure storage units. Requirements,classification and methods of test for resistanceto burglary

EN 1143-1:2005+A1:2009Safes, ATM safes, strongroom doors andstrongrooms

GW/2

EN 1594:2009Gas supply systems. Pipelines for maximumoperating pressure over 16 bar. Functionalrequirements

GSE/33

EN 1870:—Safety of woodworking machines. Circularsawing machines

EN 1870-1:2007+A1:2009Circular saw benches (with and without slidingtable), dimension saws and building site saws

MTE/23

EN 10324:—Steel wire and wire products. Hosereinforcement wire

CORRIGENDUM 1:October 2008

to EN 10324:2004ISE/26

EN 12245:2009Transportable gas cylinders. Fully wrappedcomposite cylinders

PVE/3/3

prEN 4132Aerospace series. Bolts, normal hexagonal head,coarse tolerance normal shank, long thread, inalloy steel, cadmium plated. Classification: 1100MPa (at ambient temperature)/235°C

A copy of the above document is available fromthe contact point (below).Contact: Committee Service CentreEmail: [email protected]

ACE/12

prEN 12041:2000/Amendment 1Food processing machinery. Moulders. Safetyand hygiene requirements

This standard has been revised to take accountof the comments. It has now been submittedfor combined enquiry/formal vote under theCEN Unique Acceptance Procedure. The closingdate for comments is 15 May, 2009. A copy ofthe draft is available on request underdocument reference MCE/3/5Contact: Anita AttraEmail: [email protected]

MCE/3/5

prEN 12505:2000/Amendment 1Food processing machinery. Centrifugalmachines for processing edible oils and fats.Safety and hygiene requirements

This standard has been revised to accomodatecomments as a result of the new Safety ofMachinery Directive. It has now been submittedfor combined enquiry/formal vote under theCEN Unique Acceptance Procedure. The closingdate for comments is 22 May, 2009. A copy ofthe draft is available on request underdocument reference MCE/3/5Contact: Anita AttraEmail: [email protected]

MCE/3/5

CEN EUROPEANSTANDARDS

EUROPEAN RATIFIED TEXTS

The documents listed below have recentlybeen issued by CEN but have not yet beenpublished as BS ENs. BSI has an obligationto adopt all ENs and to withdraw anyconflicting British Standards (BSs) or partsof BSs. The following will beimplemented as BS ENs or as amendmentsto BS ENs shortly. Notification of theirimplementation will be given in theBS EN Publications section of the relevantedition of Update Standards.

EN 253:2009District heating pipes. Preinsulated bonded pipesystems for directly buried hot water networks.Pipe assembly of steel service pipe,polyurethane thermal insulation and outercasing of polyethylene

RHE/9

prEN ISO 844(ISO 844:2007)Rigid cellular plastics. Determination ofcompression properties

The above has been circulated under the UAPprocedure. Copies of the draft are available onrequest from the contact point (below).Contact: Committee Service CentreEmail: [email protected]

PRI/24

prEN ISO 845(ISO 845:2006)Cellular plastics and rubbers. Determination ofapparent density

The above has been circulated under the UAPprocedure. Copies of the draft are available onrequest from the contact point (below). Pleasenote a Draft for Public Comment has alreadypreviously been issued under the DPC number05/30141310 DC.Contact: Committee Service CentreEmail: [email protected]

PRI/24

prEN ISO 6709Standard representation of geographic pointlocation by coordinates

This standard is at UAP and the UK will vote infavour as it has already been implemented asBS ISO 6709:2008.Contact: Vanessa TatlerEmail: [email protected]

IST/36

prEN ISO/TS 19139Geographic information. Metadata. XMLschema implementation

ISO/TS 19139:2007 has already been publishedas a DD ISO/TS and the UK intends to supportthe publication as a DD CEN/TS.Contact: Vanessa TatlerEmail: [email protected]

IST/36

prEN 1974:1998/Amendment 1Food processing machinery. Slicing machines.Safety and hygiene requirements

This standard has been revised to accomodatecomments as a result of the new Safety ofMachinery Directive. It has now been submittedfor combined enquiry/formal vote under theCEN Unique Acceptance Procedure. The closingdate for comments is 22 May, 2009. A copy ofthe draft is available on request underdocument reference MCE/3/5Contact: Anita AttraEmail: [email protected]

MCE/3/5

Documents Not Issued as DPCs continued...


e-mail

your order

[email protected]

EN 14509:—Self-supporting double skin metal facedinsulating panels. Factory made products.Specifications

CORRIGENDUM 1:November 2008

to EN 14509:2006B/542/12

EN 14878:—Textiles. Burning behaviour of children’snightwear. Specification

CORRIGENDUM 1:January 2009

to EN 14878:2007TCI/66/-/8

EN 14917:2009Metal bellows expansion joints for pressureapplications

PSE/12

EN 15305:—Non-destructive testing. Test method forresidual stress analysis by X-ray diffraction


to EN 15305:2008WEE/46

EN 15475:2009Fertilizers. Determination of ammoniacalnitrogen

CII/37

EN 15476:2009Fertilizers. Determination of nitric andammoniacal nitrogen according to Devarda

CII/37

EN 15477:2009Fertilizers. Determination of the water-solublepotassium content

CII/37

EN 15478:2009Fertilizers. Determination of total nitrogen inurea

CII/37

EN 15479:2009Fertilizers. Spectrophotometric determinationof biuret in urea

CII/37

EN 15558:2009Fertilizers. Determination of nitric andammoniacal nitrogen according to Ulsch

CII/37

EN 15559:2009Fertilizers. Determination of nitric andammoniacal nitrogen according to Arnd

CII/37

EN 15560:2009Fertilizers. Determination of total nitrogen incalcium cyanamide nitrate free

CII/37

EN 13463:—Non-electrical equipment for use in potentiallyexplosive atmospheres

EN 13463-1:2009Basic method and requirements

FSH/23

EN 13476:—Plastics piping systems for non-pressureunderground drainage and sewerage.Structured-wall piping systems of unplasticizedpoly(vinyl chloride)(PVC-U), polypropylene (PP)and polyethylene (PE)

EN 13476-3:2007+A1:2009Specifications for pipes and fittings withsmooth internal and profiled external surfaceand the system, Type B

PRI/88/1

EN 13480:—Metallic industrial piping

EN 13480-3:2002+A3:2009Design and calculation

PVE/10

EN 13524:2003+A1:2009Highway maintenance machines. Safetyrequirements

B/513

EN 13573:2009Inland navigation vessels. Anchoring, coupling,towing, hauling and mooring systems

SME/32/-/7

EN 13598:—Plastics piping systems for non-pressureunderground drainage and sewerage.Unplasticized poly(vinyl chloride) (PVC-U),polypropylene (PP) and polyethylene (PE)

EN 13598-2:2009Specifications for manholes and inspectionchambers in traffic areas and deepunderground installations

PRI/88/1

EN 13942:2009Petroleum and natural gas industries. Pipelinetransportation systems. Pipeline valves

PSE/17

EN 14444:—Structural adhesives. Qualitative assessment ofdurability of bonded assemblies. Wedgerupture test


to EN 14444:2005PRI/52

EN 14504:2009Inland navigation vessels. Floating landingstages. Requirements, tests

SME/32/-/7

EN 12566:—Small wastewater treatment systems for up to50 PT

EN 12566-3:2005+A1:2009Packaged and/or site assembled domesticwastewater treatment plants

B/505

EN 12671:2009Chemicals used for treatment of water intendedfor human consumption. Chlorine dioxidegenerated in situ

CII/59

EN 12876:2009Chemicals used for treatment of water intendedfor human consumption. Oxygen

CII/59

EN 13120:2009Internal blinds. Performance requirementsincluding safety

B/538/3

EN 13218:—Machine tools. Safety. Stationary grindingmachines

AMENDMENT 1:CORRIGENDUM 1:October 2008

to EN 13218:2002MTE/1

EN 13218:2002+A1:2008Machine tools. Safety. Stationary grindingmachines

MTE/1

EN 13384:—Chimneys. Thermal and fluid dynamiccalculation methods

EN 13384-2:2003+A1:2009Chimneys serving more than one heatingappliance

B/506

EN 13445:—Unfired pressure vessels

EN 13445-2:—Materials

AMENDMENT 3:January 2009

to EN 13445-2:2002PVE/1

EN 13445-2:—Materials


to EN 13445-2:2002PVE/1

EN 13445-4:—Fabrication


to EN 13445-4:2002PVE/1


CEN/TR 15276:—Fixed firefighting systems. Condensed aerosolextinguishing systems

CEN/TR 15276-1:2009Requirements and test methods for components

FSH/18/6

CEN/TR 15276-2:2009Design, installation and maintenance

FSH/18/6

CEN/TR 15367:—Petroleum products. Guide for goodhousekeeping

CEN/TR 15367-3:2009Prevention of cross contamination

PTI/2

CEN/TR 15371:2009Safety of toys. Replies to requests forinterpretation of EN 71-1, EN 71-2, and EN 71-8

CW/15

CEN/TR 15840:2009Evaluation of conformity of fly ash for concrete.Guidelines for the application of EN 450-2

B/517

CEN TECHNICALSPECIFICATIONS

CEN/TS 15699:2009Health informatics. Clinical knowledgeresources. Metadata

IST/35

CEN/TS 15705:2009Fertilizers. Determination of urea condensatesusing high-performance liquid chromotography(HPLC). Isobutylidenediurea andcrotonylidenediurea (method A) and methylen-urea oligomers (method B)

CII/37

CEN/TS 45545:—Railway applications. Fire protection on railwayvehicles

CEN/TS 45545-1:2009General

FSH/19

CEN/TS 45545-2:2009Requirements for fire behaviour of materialsand components

FSH/19

CEN/TS 45545-3:2009Fire resistance requirements for fire barriers

FSH/19

CEN WORKSHOPAGREEMENTS

CWA 15902:—Lifting and load-bearing equipment for stagesand other production areas within theentertainment industry

CWA 15902-1:2008General requirements (excluding aluminiumand steel trusses and towers)

no current standard is superseded£90.00 members, £180.00 non-members

CWA 15902-2:2008Specifications for design, manufacture and foruse of aluminium and steel trusses and towers


CWA 15903:2008Metadata for learning opportunities (MLO).Advertising


CWA 15914-1:2009Criteria, methodology and procedures forcreating an E-codification concerningsubstances used in pharmaceuticalcompounding


CEN REPORTS

CEN/TR 12101:—Smoke and heat control systems

CEN/TR 12101-4:2009Installed SHEVS systems for smoke and heatventilation

FSH/25

CEN/TR 13930:2009Rotodynamic pumps. Design of pump intakes.Recommendations for installation of pumps

MCE/6

CEN/TR 13931:2009Rotodynamic pumps. Forces and moments onflanges. Centrifugal, mixed flow and axial flowhorizontal and vertical shafts pumps

MCE/6

CEN/TR 13932:2009Rotodynamic pumps. Recommendations forfitting of inlet and outlet on piping

MCE/6

EN 15561:2009Fertilizers. Determination of total nitrogen incalcium cyanamide containing nitrates

CII/37

EN 15562:2009Fertilizers. Determination of cyanamidenitrogen

CII/37

EN 15566:2009Railway applications. Railway rolling stock.Draw gear and screw coupling

RAE/1

EN 15587:—Cereals and cereal products. Determination ofBesatz in wheat (Triticumaestivum L.), durumwheat (Triticum durum Desf.), rye (Secalecereale L.) and feed barley (Hordeum vulgare L.)


to EN 15587:2008AW/4

EN 15604:2009Fertilizers. Determination of different forms ofnitrogen in the same sample, containingnitrogen as nitric, ammoniacal, urea andcyanamide nitrogen

CII/37

EN 15632:—District heating pipes. Pre-insulated flexiblepipe systems

EN 15632-1:2009Classification, general requirements and testmethods

RHE/9

EN 15632-4:2009Bonded system with metal service pipes;requirements and test methods

RHE/9

EN 15647:2009Surface active agents. Determination of thedispersing effect of surfactants on powder

CII/34

EN 15648:2009Thermal spraying. Component relatedprocedure qualification

STI/40

EN 15698:—District heating pipes. Preinsulated bonded twinpipe systems for directly buried hot waternetworks

EN 15698-1:2009Twin pipe assembly of steel service pipe,polyurethane thermal insulation and outercasing of polyethylene

RHE/9

CEN European Standards continued...


EN 60335-2-34:—(IEC 60335-2-34:2002/A2:2008)Particular requirements for motor-compressors


to EN 60335-2-34:2002CPL/61/3

EN 60335-2-96:—(IEC 60335-2-96:2002/A2:2008)Particular requirements for flexible sheetheating elements for room heating


to EN 60335-2-96:2002CPL/61/07

EN 60404:—Magnetic materials

EN 60404-8-6:2009(IEC 60404-8-6:1999/A1:2007)Specifications for individual materials. Softmagnetic metallic materials

ISE/NFE/5

EN 60519:—Safety in electroheat installations

EN 60519-21:2009(IEC 60519-21:2008)Particular requirements for resistance heatingequipment. Heating and melting glassequipment

PEL/27

EN 60703:2009(IEC 60703:2008)Test methods for electroheating installationswith electron guns

PEL/27

EN 60758:2009(IEC 60758:2008)Synthetic quartz crystal. Specifications andguidelines for use

EPL/49

EN 61000:—Electromagnetic compatibility (EMC)

EN 61000-4-30:2009(IEC 61000-4-30:2008)Testing and measurement techniques. Powerquality measurement methods

GEL/210/12

EN 61347:—Lamp controlgear

EN 61347-2-10:—(IEC 61347-2-10:2000/A1:2008)Particular requirements for electronic invertorsand convertors for high-frequency operation ofcold start tubular discharge lamps (neon tubes)


to EN 61347-2-10:2001CPL/34/3

EN 50483-2:2009Tension and suspension clamps for selfsupporting system

GEL/20/11

EN 50483-3:2009Tension and suspension clamps for neutralmessenger system

GEL/20/11

EN 50483-4:2009Connectors

GEL/20/11

EN 50483-5:2009Electrical ageing test

GEL/20/11

EN 50483-6:2009Environmental testing

GEL/20/11

EN 60286:—Packaging of components for automatichandling

EN 60286-2:2009(IEC 60286-2:2008)Tape packaging of components withunidirectional leads on continuous tapes.

EPL/40X

EN 60297:—Mechanical structures for electronic equipment.Dimensions of mechanical structures of the482,6 mm (19 in) series

EN 60297-3-100:2009(IEC 60297-3-100:2008)Basic dimensions of front panels, subracks,chassis, racks and cabinets

EPL/48

EN 60297-3-105:2009(IEC 60297-3-105:2008)Dimensions and design aspects for 1U highchassis

EPL/48

EN 60335:—Household and similar electrical appliances.Safety

EN 60335-2-17:—(IEC 60335-2-17:2002/A2:2008)Particular requirements for blankets, pads,clothing and similar flexible heating appliances


to EN 60335-2-17:2002CPL/61/07

CEN/TS 45545-4:2009Fire safety requirements of railway rolling stockdesign

FSH/19

CEN/TS 45545-6:2009Fire control and management systems

FSH/19

CEN/TS 45545-7:2009Fire safety requirements for flammable liquidand flammable gas installations

FSH/19

CENELEC PUBLICATIONS

EUROPEAN RATIFIED TEXTS

The documents listed below have recentlybeen issued by CENELEC but have not yetbeen published as BS ENs. BSI has anobligation to adopt all ENs and towithdraw any conflicting BritishStandards (BSs) or parts of BSs. Thefollowing will be implemented as BS ENsor as amendments to BS ENs shortly.Notification of their implementation willbe given in the BS EN Publications sectionof the relevant edition of UpdateStandards.

EN 50164:—Lightning Protection Components (LPC)

EN 50164-3:—Requirements for isolating spark gaps


to EN 50164-3:2006GEL/81

EN 50164-5:2009Requirements for earth electrode inspectionhousings and earth electrode seals

GEL/81

EN 50164-6:2009Requirements for lightning strike counters

GEL/81

EN 50194:—Electrical apparatus for the detection ofcombustible gases in domestic premises

EN 50194-1:2009Test methods and performance requirements

GEL/31/19

EN 50483:—Test requirements for low voltage aerialbundled cable accessories

EN 50483-1:2009Generalities

GEL/20/11


IEC 60794:—Optical fibre cables

IEC 60794-3:—Outdoor cables

IEC 60794-3-10:2009(Edition 2)

Family specification for duct, directly buried andlashed aerial optical telecommunication cables£108.48 members, £113.00 non-members

GEL/86/1

IEC 60794-3-20:2009(Edition 2)

Family specification for self-supporting aerialtelecommunication cables£91.20 members, £95.00 non-members

GEL/86/1

IEC 60851:—Winding wires. Test methods

IEC 60851-3:2009(Edition 3)

Mechanical properties£151.68 members, £158.00 non-members

GEL/55

IEC 60947:—Low-voltage switchgear and controlgear

IEC 60947-2:—Circuit-breakers


to IEC 60947-2:2006£108.48 members, £113.00 non-members

PEL/17/2

IEC 60966:—Radio frequency and coaxial cable assemblies

IEC 60966-2-3:2009(Edition 3)

Detail specification for flexible coaxial cableassemblies. Frequency range 0 MHz to 1000MHz, IEC 61169-8 connectors£26.88 members, £28.00 non-members

EPL/46

IEC 60966-2-4:2009(Edition 3)

Detail specification for cable assemblies forradio and TV receivers. Frequency range 0 MHzto 3000 MHz, IEC 61169-2 connectors£30.72 members, £32.00 non-members

EPL/46

IEC 60966-2-5:2009(Edition 3)


EPL/46

IEC PUBLICATIONS

It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.

The following IEC publications areavailable from BSI Customer Services (see’How to order’ on page 2)

IEC 60068:—Environmental testing

IEC 60068-2-14:2009(Edition 6)

Tests. Test N. Change of temperature£83.52 members, £87.00 non-members

GEL/104

IEC 60068-2-38:2009(Edition 2)

Tests. Test Z/AD. Compositetemperature/humidity cyclic test£57.60 members, £60.00 non-members

GEL/104

IEC 60115:—Fixed resistors for use in electronic equipment

IEC 60115-8:2009(Edition 2)

Sectional specification. Fixed surface mountresistors£151.68 members, £158.00 non-members

EPL/40X

IEC 60204:—Safety of machinery. Electrical equipment ofmachines

IEC 60204-1:—General requirements

AMENDMENT 1:November 2008


MCE/3

IEC 60317:—Specifications for particular types of windingwires

IEC 60317-16:—Polyester enamelled rectangular copper wire,class 155



GEL/55

EN 61857:—Electrical insulation systems. Procedures forthermal evaluation

EN 61857-1:2009(IEC 61857-1:2008)General requirements. Low-voltage

GEL/112

EN 61883:—Consumer audio/video equipment. Digitalinterface

EN 61883-8:2009(IEC 61883-8:2008)Transmission of ITU-R BT.601 style digital videodata

EPL/100

EN 62024:—High frequency inductive components. Electricalcharacteristics and measuring methods

EN 62024-2:2009(IEC 62024-2:2008)Rated current of inductors for DC to DCconverters

EPL/51

EN 62503:2009(IEC 62503:2008)Multimedia quality. Method of assessment ofsynchronization of audio and video

EPL/100

EN 62535:2009(IEC 62535:2008)Insulating liquids. Test method for detection ofpotentially corrosive sulfur in used and unusedinsulating oil

GEL/10

CENELEC TECHNICALSPECIFICATIONS

CLC/TS 45545:—Railway applications. Fire protection on railwayvehicles

CLC/TS 45545-5:2009Fire safety requirements for electricalequipment including that of trolley buses, trackguided buses and magnetic levitation vehicles

FSH/19

CLC/TS 60034:—Rotating electrical machines

CLC/TS 60034-25:2008(IEC/TS 60034-25:2007)Guidance for the design and performance ofA.C. motors specifically designed for convertersupply

PEL/2

CENELEC Publications continued...


IEC 61557-11:2009Effectiveness of residual current monitors(RCMs) type A and type B in TT, TN and IT systems£91.20 members, £95.00 non-members

PEL/85

IEC 61755:—Fibre optic connector optical interfaces

IEC 61755-3-1:—Optical interface, 2,5 mm and 1,25 mmdiameter cylindrical full zirconia PC ferrulesingle mode fibre


to IEC 61755-3-1:2006GEL/86/2

IEC 61755-3-2:—Optical interface, 2,5 mm and 1,25 mmdiameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres


to IEC 61755-3-2:2006GEL/31

IEC 61755-3-7:2009Optical interface, 2,5 mm and 1,25 mmdiameter cylindrical PC composite ferrule usingtitanium as fibre surrounding material, singlemode fibre£45.12 members, £47.00 non-members

GEL/86/2

IEC 61755-3-8:2009Optical interface, 2,5 mm and 1,25 mmdiameter cylindrical 8 degrees angled-APCcomposite ferrule using titanium as fibresurrounding material, single mode fibre£45.12 members, £47.00 non-members

GEL/86/2

IEC 61914:2009Cable cleats for electrical installations£108.48 members, £113.00 non-members

PEL/213

IEC 62007:—Semiconductor optoelectronic devices for fibreoptic system applications

IEC 62007-2:2009(Edition 2)

Semiconductor optoelectronic devices for fibreoptic system applications Part 2: Measuringmethods£134.40 members, £140.00 non-members

GEL/86/3

IEC 62059:—Electricity metering equipment. Dependability

IEC 62059-31-1:—Accelerated reliability testing. Elevatedtemperature and humidity

CORRIGENDUM 1:December 2008

to IEC 62059-31-1:2008PEL/13

IEC 61300-3-7:2009(Edition 2)

Wavelength dependence of attenuation andreturn loss of single mode components£108.48 members, £113.00 non-members

GEL/86/2

IEC 61300-3-34:2009(Edition 3)

Attenuation of random mated connectors£52.80 members, £55.00 non-members

GEL/86/2

IEC 61300-3-43:2009Mode transfer function measurement for fibreoptic sources£83.52 members, £87.00 non-members

GEL/86/2

IEC 61314:—Fibre optic interconnecting devices and passivecomponents. Fibre optic fan-outs

IEC 61314-1:2009(Edition 3)

Generic specification£83.52 members, £87.00 non-members

GEL/86/2

IEC 61439:—Low-voltage switchgear and controlgearassemblies

IEC 61439-1:2009General rules£230.40 members, £240.00 non-members

PEL/17/3

IEC 61439-2:2009Power switchgear and controlgear assemblies£91.20 members, £95.00 non-members

PEL/17/3

IEC 61534:—Powertrack systems

IEC 61534-22:2009Particular requirements for powertrack systemsintended for on floor or under floor installation£91.20 members, £95.00 non-members

PEL/213

IEC 61557:—Electrical safety in low voltage distributionsystems up to 1000 V A.C. and 1500 V D.C.Equipment for testing, measuring ormonitoring of protective measures

IEC 61557-9:2009(Edition 2)

Equipment for insulation fault location in IT systems£91.20 members, £95.00 non-members

PEL/85

IEC 60966-2-6:2009(Edition 3)


EPL/46

IEC 60966-3-1:2009(Edition 3)

Blank detail specification for semi-flexiblecoaxial cable assemblies£45.12 members, £47.00 non-members

EPL/46

IEC 61073:—Fibre optic interconnecting devices and passivecomponents. Mechanical splices and fusionsplice protectors for optical fibres and cables

IEC 61073-1:2009(Edition 4)

Generic specification£83.52 members, £87.00 non-members

GEL/86/2

IEC 61196:—Coaxial communication cables

IEC 61196-6-1:2009Blank detail specification for CATV drop cables£40.32 members, £42.00 non-members

EPL/46/1

IEC 61196-6:2009Sectional specification for CATV drop cables£48.00 members, £50.00 non-members

EPL/46/1

IEC 61300:—Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures

IEC 61300-2-2:2009(Edition 3)

Tests. Mating durability£40.32 members, £42.00 non-members

GEL/86/2

IEC 61300-2-5:2009(Edition 3)

Tests. Torsion£40.32 members, £42.00 non-members

GEL/86/2

IEC 61300-3:—Examination and measurements

IEC 61300-3-2:2009(Edition 3)

Polarization dependent loss in a single-modefibre optic device£65.28 members, £68.00 non-members

GEL/86/2

IEC Publications continued...


ISO 863:2008(Edition 2)

Cement. Test methods. Pozzolanicity test forpozzolanic cements£57.60 members, £60.00 non-members

B/516/12

Will be implemented as an identical British Standard


Horology. Functional and non-functional jewels£38.40 members, £40.00 non-members

STI/53


ISO 1628:—Plastics. Determination of the viscosity ofpolymers in dilute solution using capillaryviscometers

ISO 1628-1:2009(Edition 3)

General principles£93.12 members, £97.00 non-members

PRI/21


ISO 1924:—Paper and board. Determination of tensileproperties

ISO 1924-2:2008(Edition 3)

Constant rate of elongation method (20mm/min)£65.28 members, £68.00 non-members

PAI/11



Metallic and other inorganic coatings.Electroplated coatings of zinc withsupplementary treatments on iron or steel£74.88 members, £78.00 non-members

STI/33



Agricultural tractors and machinery. Connectionof implements via three-point linkage.Clearance zone around implement£45.12 members, £47.00 non-members

AGE/6


ISO 2834:—Graphic technology. Laboratory preparation oftest prints

ISO 2834-3:2008Screen printing inks£50.88 members, £53.00 non-members

PAI/43


IEC/PAS PUBLICATIONS

IEC/PAS 62591:2009Industrial communication networks. Fieldbusspecifications. WirelessHART™ communicationnetwork and communication profile£256.32 members, £267.00 non-members

AMT/7

IEC/PAS 62596:2009Electrotechnical products. Determination ofrestricted substances. Sampling procedure.Guidelines£174.72 members, £182.00 non-members

GEL/111

IEC/PAS 62601:2009Industrial communication networks. Fieldbusspecifications. WIA-PA communication networkand communication profile£233.28 members, £243.00 non-members

AMT/7

ISO PUBLICATIONS

It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.

The following ISO publications areavailable from BSI Customer Services (see’How to order’ on page 2)

ISO 148:—Metallic materials. Charpy pendulum impacttest

ISO 148-2:2008(Edition 2)

Verification of testing machines£118.08 members, £123.00 non-members

ISE/NFE/4/4


ISO/TR 230:—Test code for machine tools

ISO/TR 230-8:2009Determination of vibration levels£166.08 members, £173.00 non-members

MTE/1


ISO 730:2009Agricultural wheeled tractors. Rear-mountedthree-point linkage. Categories 1N, 1, 2N, 2, 3N,3, 4N and 4£74.88 members, £78.00 non-members

AGE/6


IEC 62137:—Surface mounting technology. Environmentaland endurance test methods for surface mountsolder joint

IEC 62137-1-4:2009Cyclic bending test£52.80 members, £55.00 non-members

EPL/501

IEC 62271:—High-voltage switchgear and controlgear

IEC 62271-110:2009(Edition 2)

Inductive load switching£100.80 members, £105.00 non-members

PEL/17/1

IEC/TR 62296:2009(Edition 2)

Considerations of unaddressed safety aspects inthe second edition of IEC 60601-1 and proposalsfor new requirements£213.12 members, £222.00 non-members

CH/62/1

IEC 80601:—Medical electrical equipment

IEC 80601-2-30:2009Particular requirements for the basic safety andessential performance of automated type non-invasive sphygmomanometers£174.72 members, £182.00 non-members

CH/62/4

IEC CISPR 12:—Vehicles, boats and internal combustionengines. Radio disturbance characteristics.Limits and methods of measurement for theprotection of off-board receivers


to IEC CISPR 12:2007£19.20 members, £20.00 non-members

GEL/210/11

IEC CISPR 16:—Specification for radio disturbance andimmunity measuring apparatus and methods

IEC CISPR 16-1-2:—Radio disturbance and immunity measuringapparatus. Ancillary equipment. Conducteddisturbances


to IEC CISPR 16-1-2:2003GEL/210/12



Steel cord conveyor belts. Methods for thedetermination of total thickness and coverthickness£50.88 members, £53.00 non-members

PRI/67


ISO/IEC 7816:—Identification cards. Integrated circuit cards

ISO/IEC 7816-15:—Cryptographic information application

AMENDMENT 2:December 2008

to ISO/IEC 7816-15:2004£14.40 members, £15.00 non-members

IST/17


ISO 7919:—Mechanical vibration. Evaluation of machinevibration by measurements on rotating shafts

ISO 7919-3:2009(Edition 2)

Coupled industrial machines£50.88 members, £53.00 non-members

GME/21/5



Timber structures. Glued laminated timber. Testmethods for determination of physical andmechanical properties£102.72 members, £107.00 non-members

B/518

Will not be implemented as a British Standard

ISO/IEC 9594:—Information technology. Open SystemsInterconnection

ISO/IEC 9594-2:—The Directory. Models


to ISO/IEC 9594-2:2001IST/6


ISO/IEC 9834:—Information technology. Open SystemsInterconnection. Procedures for the operationof OSI Registration Authorities

ISO/IEC 9834-9:2008Registration of object identifier arcs forapplications and services using tag-basedidentification£45.12 members, £47.00 non-members

IST/6



Resistance welding. Spot welding electrode caps£57.60 members, £60.00 non-members

WEE/29


ISO 5832:—Implants for surgery Metallic materials

ISO 5832-12:—Wrought cobalt-chromium-molybdenum alloy

CORRIGENDUM 1:September 2008

to ISO 5832-12:2007CH/150/1


ISO 6020:—Hydraulic fluid power. Mounting dimensions forsingle rod cylinders, 16 MPa (160 bar) series

ISO 6020-2:—Compact series


to ISO 6020-2:2006MCE/18/-/3


ISO 6550:—Road vehicles. Sheath-type glow-plugs withconical seating and their cylinder head housing

ISO 6550-3:2009(Edition 3)

M10 glow-plugs£57.60 members, £60.00 non-members

MCE/9


ISO 7299:—Diesel engines. End-mounting flanges forpumps

ISO 7299-2:2009High-pressure supply pumps for common railfuel injection systems£57.60 members, £60.00 non-members

MCE/22


ISO 7547:—Ships and marine technology. Air-conditioningand ventilation of accommodation spaces.Design conditions and basis of calculations

CORRIGENDUM 1:September 2008

to ISO 7547:2002SME/32/-/3



Road vehicles. Sheath-type glowplugs. Generalrequirements and test methods£45.12 members, £47.00 non-members

MCE/9


ISO 3822:—Acoustics. Laboratory tests on noise emissionfrom appliances and equipment used in watersupply installations

ISO 3822-1:—Method of measurement

AMENDMENT 1:December 2008

to ISO 3822-1:1999£14.40 members, £15.00 non-members

EH/1/6



Road vehicles. Location of hand controls,indicators and tell-tales in motor vehicles£57.60 members, £60.00 non-members

AUE/12


ISO 4141:—Road vehicles. Multi-core connecting cables

ISO 4141-4:2009(Edition 2)

Test methods and requirements for coiled cableassemblies£57.60 members, £60.00 non-members

AUE/16


ISO 4642:—Rubber and plastics hoses, non-collapsible, forfire-fighting service

ISO 4642-1:2009Semi-rigid hoses for fixed systems£79.68 members, £83.00 non-members

PRI/66/-/1


ISO 4642-2:2009Semi-rigid hoses (and hose assemblies) forpumps and vehicles£102.72 members, £107.00 non-members

PRI/66/-/1


ISO 5398:—Leather. Chemical determination of chromicoxide content

ISO 5398-2:2009Quantification by colorimetric determination£45.12 members, £47.00 non-members

TCI/69


ISO 5630:—Paper and board. Accelerated ageing

ISO 5630-5:2008Exposure to elevated temperature at 100°C£50.88 members, £53.00 non-members

PAI/11


ISO Publications continued...


ISO/TR 12885:2008Nanotechnologies Health and safety practices inoccupational settings relevant tonanotechnologies£98.00 members, £163.00 non-members

NTI/1


ISO 13012:—Rolling bearings Accessories for sleeve typelinear ball bearings

ISO 13012-1:2009Boundary dimensions and tolerances for series 1and 3£84.48 members, £88.00 non-members

MCE/7


ISO 13012-2:2009Boundary dimensions and tolerances for series 5£65.28 members, £68.00 non-members

MCE/7


ISO 13606:—Health informatics. Electronic health recordcommunication

ISO 13606-3:2009Reference archetypes and term lists£131.52 members, £137.00 non-members

IST/35


ISO/IEC 14165:—Information technology. Fibre channel

ISO/IEC 14165-116:—10 Gigabit Fibre Channel (10GFC)


to ISO/IEC 14165-116:2005£33.60 members, £35.00 non-members

IST/6


ISO/IEC 14165-521:2009Fabric application interface standard (FAIS)£166.08 members, £173.00 non-members

IST/6


ISO/IEC 14496:—Information technology. Coding of audio-visualobjects

ISO/IEC 14496-3:—Audio

AMENDMENT 2:CORRIGENDUM 2:December

2008

to ISO/IEC 14496-3:2005IST/37

Will not be implemented as a British Standard. Isapproved as suitable for use in the UK

ISO/TS 10891:2009Freight containers. Radio frequencyidentification (RFID). Licence plate tag£74.88 members, £78.00 non-members

TW/1


ISO 11001:—Agricultural wheeled tractors and implements.Three-point hitch couplers

ISO 11001-3:2009(Edition 2)

Link coupler£38.40 members, £40.00 non-members

AGE/6


ISO 11155:—Road vehicles. Air filters for passengercompartments

ISO 11155-2:2009Test for gaseous filtration£79.68 members, £83.00 non-members

MCE/21/2



Textile floor coverings. Laboratory cleaningprocedure using spray extraction£38.40 members, £40.00 non-members

PRI/3



Plastics pipes and fittings. Preparation of testpiece assemblies between a polyethylene (PE)pipe and an electrofusion fitting£57.60 members, £60.00 non-members

PRI/88/4



Plastics pipes and fittings Preparation ofpolyethylene (PE) pipe/pipe or pipe/fitting testpiece assemblies by butt fusion£50.88 members, £53.00 non-members

PRI/88/4



Fire fighting. Wheeled fire extinguishers.Performance and construction£97.92 members, £102.00 non-members

FSH/2


ISO 9927:—Cranes. Inspection

ISO 9927-1:2009(Edition 2)

General£50.88 members, £53.00 non-members

MHE/3/11


ISO 10295:—Fire tests for building elements andcomponents. Fire testing of service installations

ISO 10295-2:2009Linear joint (gap) seals£97.92 members, £102.00 non-members

FSH/22


ISO 10303:—Industrial automation systems and integration.Product data representation and exchange

ISO 10303-215:—Application protocol. Ship arrangement


to ISO 10303-215:2004AMT/4


ISO/TR 10771:—Hydraulic fluid power. Fatigue pressure testingof metal pressure-containing envelopes

ISO/TR 10771-2:2008Rating methods£118.08 members, £123.00 non-members

MCE/18/-/8


ISO 10816:—Mechanical vibration. Evaluation of machinevibration by measurements on non-rotatingparts

ISO 10816-3:2009(Edition 2)

Industrial machines with nominal power above15 kW and nominal speeds between 120 r/minand 15 000 r/min when measured in situ£65.28 members, £68.00 non-members

GME/21/5


ISO 10816-7:2009Rotodynamic pumps for industrial applications,including measurements on rotating shafts£79.68 members, £83.00 non-members

GME/21/5





Instrumentation for use in association with non-active surgical implants. General requirements£84.48 members, £88.00 non-members

CH/150


ISO 16918:—Steel and iron. Determination of nine elementsby the inductively coupled plasma massspectroscopic method

ISO 16918-1:2009Determination of tin, antimony, cerium, leadand bismuth£102.72 members, £107.00 non-members

ISE/18


ISO 17484:—Plastics piping systems. Multilayer pipe systemsfor indoor gas installations

ISO 17484-2:2009Code of practice£50.88 members, £53.00 non-members

PRI/88/2


ISO 17572:—Intelligent transport systems (ITS). Locationreferencing for geographic databases

ISO 17572-1:2008General requirements and conceptual model£122.88 members, £128.00 non-members

EPL/278


ISO 17572-2:2008Pre-coded location references (pre-codedprofile)£113.28 members, £118.00 non-members

EPL/278


ISO 17572-3:2008Dynamic location references (dynamic profile)£166.08 members, £173.00 non-members

EPL/278


ISO/TS 17665:—Sterilization of health care products. Moist heat

ISO/TS 17665-2:2009Guidance on the application of ISO 17665-1£131.52 members, £137.00 non-members

CH/198


ISO 15592:—Fine-cut tobacco and smoking articles madefrom it. Methods of sampling, conditioning andanalysis

ISO 15592-3:2008(Edition 2)

Determination of total particulate matter ofsmoking articles using a routine analyticalsmoking machine, preparation for thedetermination of water and nicotine, andcalculation of nicotine-free dry particulatematter£108.48 members, £113.00 non-members

AW/40


ISO 15616:—Acceptance tests for CO2-laser beam machinesfor high quality welding and cutting

ISO 15616-4:2008Machines with 2-D moving optics£50.88 members, £53.00 non-members

WEE/-/1


ISO 15633:2009Iron ores. Determination of nickel. Flameatomic absorption spectrometric method£70.08 members, £73.00 non-members

ISE/58


ISO 15726:2009Metallic and other inorganic coatings.Electrodeposited zinc alloys with nickel, cobaltor iron£70.08 members, £73.00 non-members

STI/33


ISO 15862:2009Space systems. Launch-vehicle-to-spacecraftflight environments telemetry data processing£57.60 members, £60.00 non-members

ACE/68/-/2


ISO 16000:—Indoor air

ISO 16000-16:2008Detection and enumeration of moulds.Sampling by filtration£84.48 members, £88.00 non-members

EH/2/3


ISO 16000-17:2008Detection and enumeration of moulds. Culture-based method£93.12 members, £97.00 non-members

EH/2/3


ISO/IEC 14496-3:—Audio


2008

to ISO/IEC 14496-3:2005IST/37


ISO/IEC TR 14496-9:2009(Edition 3)

Reference hardware description£292.80 members, £305.00 non-members

IST/37


ISO/IEC 14496-12:—ISO base media file format


to ISO/IEC 14496-12:2008IST/37


ISO/IEC 14496-16:—Animation Framework eXtension (AFX)


2008

to ISO/IEC 14496-16:2006IST/37


ISO/IEC 14762:2009Information technology. Functional safetyrequirements for home and building electronicsystems (HBES)£52.80 members, £55.00 non-members

IST/6


ISO 15086:—Hydraulic fluid power. Determination of thefluid-borne noise characteristics of componentsand systems

ISO 15086-3:2008Measurement of hydraulic impedance£97.92 members, £102.00 non-members

MCE/18/-/8


ISO/IEC 15444:—Information technology. JPEG 2000 imagecoding system

ISO/IEC 15444-12:—ISO base media file format


to ISO/IEC 15444-12:2008IST/37




ISO 21487:—Small craft. Permanently installed petrol anddiesel fuel tanks


to ISO 21487:2006GME/33


ISO 22007:—Plastics. Determination of thermal conductivityand thermal diffusivity

ISO 22007-2:2008Transient plane heat source (hot disc) method£79.68 members, £83.00 non-members

PRI/21


ISO 22007-3:2008Temperature wave analysis method£74.88 members, £78.00 non-members

PRI/21


ISO 22007-4:2008Laser flash method£65.28 members, £68.00 non-members

PRI/21


ISO 22036:2008Soil quality. Determination of trace elements inextracts of soil by inductively coupled plasma.atomic emission spectrometry (ICP-AES)£108.48 members, £113.00 non-members

EH/4


ISO 22108:2008Space systems. Non-flight items in flighthardware. Identification and control£57.60 members, £60.00 non-members

ACE/68/-/3


ISO 22201:2009Lifts (elevators). Design and Development ofprogrammable electronic systems in safety-related application for lifts (PESSRAL)£122.88 members, £128.00 non-members

MHE/4


ISO 22837:2009Vehicle probe data for wide areacommunications£137.28 members, £143.00 non-members

EPL/278


ISO 20474-9:2008Requirements for pipelayers£50.88 members, £53.00 non-members

B/513/1


ISO 20474-10:2008Requirements for trenchers£50.88 members, £53.00 non-members

B/513/1


ISO 20474-11:2008Requirements for earth and landfill compactors£45.12 members, £47.00 non-members

B/513/1


ISO 20474-12:2008Requirements for cable excavators£74.88 members, £78.00 non-members

B/513/1


ISO 20474-13:2008Requirements for rollers£93.12 members, £97.00 non-members

B/513/1


ISO/TS 20474-14:2008Information on national and regional provisions£79.68 members, £83.00 non-members

B/513/1


ISO 20666:2008Water quality. Determination of the chronictoxicity to Brachionus calyciflorus in 48 h£74.88 members, £78.00 non-members

EH/3/5


ISO 20775:2009Information and documentation. Schema forholdings information£131.52 members, £137.00 non-members

IDT/2/7


ISO 21307:2009Plastics pipes and fittings. Butt fusion jointingprocedures for polyethylene (PE) pipes andfittings used in the construction of gas andwater distribution systems£70.08 members, £73.00 non-members

PRI/88/2


ISO 21439:2009Clinical dosimetry. Beta radiation sources forbrachytherapy£166.08 members, £173.00 non-members

NCE/2


ISO/IEC 19796:—Information technology. Learning, educationand training. Quality management, assuranceand metrics

ISO/IEC 19796-3:2009Reference methods and metrics£118.08 members, £123.00 non-members

IST/43


ISO 20474:—Earth-moving machinery. Safety

ISO 20474-1:2008General requirements£93.12 members, £97.00 non-members

B/513/1


ISO 20474-2:2008Requirements for tractor-dozers£45.12 members, £47.00 non-members

B/513/1


ISO 20474-3:2008Requirements for loaders£57.60 members, £60.00 non-members

B/513/1


ISO 20474-4:2008Requirements for backhoe loaders£70.08 members, £73.00 non-members

B/513/1


ISO 20474-5:2008Requirements for hydraulic excavators£65.28 members, £68.00 non-members

B/513/1


ISO 20474-6:2008Requirements for dumpers£57.60 members, £60.00 non-members

B/513/1


ISO 20474-7:2008Requirements for scrapers£45.12 members, £47.00 non-members

B/513/1


ISO 20474-8:2008Requirements for graders£38.40 members, £40.00 non-members

B/513/1



ISO 26868:2009Space data and information transfer systems.Image data compression£137.28 members, £143.00 non-members

ACE/68/-/7


ISO 27668:—Gel ink ball pens and refills

ISO 27668-1:2009General use£65.28 members, £68.00 non-members

TDW/4


ISO 27668-2:2009Documentary use (DOC)£38.40 members, £40.00 non-members

TDW/4


ISO/TS 27893:2009Vacuum technology. Vacuum gauges.Evaluation of the uncertainties of results ofcalibrations by direct comparison with areference gauge£74.88 members, £78.00 non-members

MCE/8/-/4


ISO 28219:2009Packaging. Labelling and direct productmarking with linear bar code and two-dimensional symbols£131.52 members, £137.00 non-members

PKW/0


ISO/IEC 29121:2009Information technology. Digitally recordedmedia for information interchange and storage.Data migration method for DVD-R, DVD-RW,DVD-RAM, +R, and +RW disks£74.88 members, £78.00 non-members

ICT/-/1


ISO 30042:2008Systems to manage terminology, knowledgeand content. TermBase eXchange (TBX)£166.08 members, £173.00 non-members

TS/1


ISO GUIDE 30:—Terms and definitions used in connection withreference materials

AMENDMENT 1:November 2008

to ISO GUIDE 30:1992£14.40 members, £15.00 non-members

RMI/1


ISO/IEC 24747:2009Information technology. Programminglanguages, their environments and systemsoftware interfaces. Extensions to the C Libraryto support mathematical special functions£84.48 members, £88.00 non-members

IST/5


ISO/IEC 24767:—Information technology. Home network security

ISO/IEC 24767-2:2009Internal security services. Secure communicationprotocol for middleware (SCPM)£118.08 members, £123.00 non-members

IST/6


ISO 25137:—Plastics. Sulfone plastics moulding and extrusionmaterials

ISO 25137-1:2009Designation system and basis for specifications£65.28 members, £68.00 non-members

PRI/82


ISO 25137-2:2009Preparation of test specimens anddetermination of properties£45.12 members, £47.00 non-members

PRI/82


ISO 25457:2008 (CD-ROM)Petroleum, petrochemical and natural gasindustries. Flare details for general refinery andpetrochemical service£206.40 members, £215.00 non-members

PSE/17/-/6


ISO 26362:2009Access panels in market, opinion and socialresearch. Vocabulary and service requirements£70.08 members, £73.00 non-members

SVS/3


ISO 26423:2009Fine ceramics (advanced ceramics, advancedtechnical ceramics). Determination of coatingthickness by crater-grinding method£74.88 members, £78.00 non-members

RPI/13


ISO 26602:2009Fine ceramics (advanced ceramics, advancedtechnical ceramics). Silicon nitride materials forrolling bearing balls£50.88 members, £53.00 non-members

RPI/13


ISO 22900:—Road vehicles. Modular vehicle communicationinterface (MVCI)

ISO 22900-2:2009Diagnostic protocol data unit applicationprogramming interface (D-PDUAPI)£167.00 members, £278.00 non-members

AUE/16


ISO 22951:2009Data dictionary and message sets for pre-emption and prioritization signal systems foremergency and public transport vehicles(PRESTO)£131.52 members, £137.00 non-members

EPL/278


ISO/IEC 23000:—Information technology. Multimedia applicationformat (MPEG-A)

ISO/IEC 23000-4:2009(Edition 2)

Musical slide show application format£137.28 members, £143.00 non-members

IST/37


ISO 23814:2009Cranes. Competency requirements for craneinspectors£50.88 members, £53.00 non-members

MHE/3/11



Polyethylene of raised-temperature resistance(PE-RT). Pipes. Effect of time and temperatureon the expected strength£50.88 members, £53.00 non-members

PRI/88/4


ISO 24393:2008Rolling bearings. Linear motion rollingbearings. Vocabulary£113.28 members, £118.00 non-members

MCE/7


ISO/IEC TR 24732:2009Information technology. Programminglanguages, their environments and systemsoftware interfaces. Extension for theprogramming language C to supportdecimalfloating-point arithmetic£97.92 members, £102.00 non-members

IST/5




bs quick reference guide 2009-03-mar

Documents

ic stripline

integral combustion

eccentric

london w4

atomic absorption

atomic absorption

rough handling

alkaline ammonium