c h n ologi if e s r et e r e n e d i d w g t engineered ... · pdf filedesigner and...

Designer and Manufacturer of Custom Lifting Solutions

EnginEErED Lifting tEChnoLogiES

ENGINEE

RED

LIFT

ING TECHNOLOGIES REGISTERED with DESIGN • ENGIN

EERE

D LI

FTIN

G TECHNOLOGIES REGISTERED with DESIGN •

www.eltlift.com

ISO 9001:2008 Registered with Design

www.eltlift.com3566 South Benzing Rd, oRchaRd PaRk, nY 14127 • 855.800.9568 • [email protected]

BEAMS — ASB BrACKEtS

Adjustable Hook Beam (AHB)WLL: 1,000 to 60,000 lbs

Max. Distance between Hooks: 20 ftLarger custom sizes available.

Adjustable Spreader Brackets (ASB)WLL: 10,000 to 200,000 lbs

Length: 5 to 40 ftBeam length easily adjustable by sliding the brackets to a different set of holes.Additional pick points can be added at the jobsite by drilling additional holes.

You have the option of supplyingyour own rectangular tube.

Larger sizes can be engineered.

fixed hooked Beam (fhB)WLL: 1,000 to 60,000 lbs

Max. Distance between Hooks: 20 ftLarger custom sizes available.

custom four Point lifter (cfP)Lifting Beams can be configured to

meet your specific lifting requirements.Popular options for these lifters are:Off Center Bail with Counter Balance, Adjustable Bail &/or Adjustable Legs

Custom Three Point Lifters also available.

Twin Bail Beam (TBB) withmultiple Pick & adjustable Pick Points

WLL: 1,000 to 60,000 lbsMax. Distance between Hooks: 20 ft

Larger custom sizes available.

Custom Spreader BeamSpreader Beams are custom designed and built for your specific lifting requirements.

Beam Options • J-hook • low head Room • upper chain Bridle assembly • adjustable Bail (powered or manual)

ahB-20-120-48

aSB-20-20

fhB-80-180

cfP

tBB-20-120

SPReadeR Beam

CoiL & ShEEt LiftErS – C-hooKS

telescoping Sheet lifter (tSl)WLL: 6,000 to 40,000 lbs

Worm Gear Assembly locks legs into positionCustom dimensions & capacities available.

close Stacking c-hook (cSc)WLL: 1,000 to 100,000 lbs

Coil Widths: from 24 to 84 inchesVertical Clearances: 16 to 44 inches

Custom sizes and capacities available.

narrow aisle coil lifter (nac)WLL: 20,000 to 80,000 lbs

Widths: up to 96 inchesVertical Clearance: up to 36 inches


custom close Stacking c-hook (cSc)WLL: 77,000 lbs

Optional Replaceable Urethane BumpersLow Profile Reinforced Lower Leg


heavy duty telescoping Verticalid & od lifter (til)

WLL: 10,000 to 150,000 lbsCoil Widths: 20 to 96 inches

Proximity & Load Sensors available.

mill duty telescoping coil lifter (tcl)WLL: 10,000 to 150,000 lbsCoil Widths: 20 to 96 inches

Proprietary, Greaseless, Low Friction UnitCustom dimensions & capacities available.

Above unit shows motorized optionwith Proximity & Load Sensors.

tSl-10-96-36-16

cSc-50-60-36-28

nac-50-72-24-34

cuStom cSc

til w/hand wheel

PoweRed tcl

elt manufactures custom tongsAvailable in a variety of styles to suit your requirements.

TONGS

fully motorized, battery operated and remote controlled

convector Plate lifterMechanically operated model also

available — requires NO power!

cuStom conVectoR Plate lifteR

Retracted

extended


BASKEtS

Crane Basket High (CBH)4 ft x 4 ft x 8 ftWLL: 1,000 lbs

Personnel Crane Basket High ProfileCustom sizes and capacities available.

crane material Basket (cmB)4 ft 2 in x 4 ft 2 in x 4 ft WLL: 2,000 to 4,000 lbs

Custom sizes and capacities available.Above unit includes optional casters and a

solid bail to allow for head room restrictions.

Crane Basket High (CBH)4 ft x 8 ft x 8 ftWLL: 1,500 lbs

Personnel Crane Basket High ProfileCustom sizes and capacities available.

crane material Basket (cmB)2 ft x 2 ft x 2 ft with 3 ft Upper Arm

WLL: 1,000 lbsCustom sizes and capacities available.

Above unit is designed to fit into small areas. The solid bail provides sufficient clearancefor placing items in & out of the basket..

crane Basket low (cBl)4 ft x 4 ft x 4 ftWLL: 1,000 lbs

Personnel Crane Basket Low ProfileCustom sizes and capacities available.

Personnel Crane Basket (12 man)10 ft x 10 ft x 8 ftWLL: 5,000 lbs

Custom sizes and capacities available.

cBh-0404-1000

cmB-042042-4000

cBh-0408-1500

cmB-0202-1000

cBl-0404-1000

cuStom 12 man cRane BaSket

Standard Equipment on Personnel Baskets• FourLegBridlew/masterlink&fourbolttypeshackles• SafetyLanyardandtaglineanchors• Quickattach/detachtestweightassembly• In-Swing,selfclosing,selflatchingdoor• GrabRailaroundfullinteriorperimeter• Full4" kick plate• Full42" height expanded metal to reduce wind affect• Slipresistantcheckeredplatefloor• ForkLiftTubesforeasymovementatthejobsite• DrainHolesinfloorperimeter• Paintedsafetyyellow

Optional Equipment• SolidBail,optionalforrestrictedheadroom• RubberBumperaroundbottomandperimeter• CastersSystemallowrollingfullyloaded• ExpandedMetalremovableorfixedoverheadprotection• TestWeightisavailableassteelconcreteformforyoutofillwithconcrete on the jobsite in order to provide a more economical solution

crane Baskets are designed to aSme Bth-1. manufactured and tested inaccordance with code of federal Regulations 1926.1501 and aSme B30.23 and are completely oSha compliant. crane Baskets are designed, fabricated, tested and certified to exceed the above standards in order to meet the demands for a long life of rugged jobsite use.

elt provides custommaterial & crane Baskets to meet

your specific requirements.


PALLEt LiftErS – forKLift AttAChMEntS – SKiP PAnS

fixed crane forks (fcf)WLL: 1,000 to 50,000 lbs

Load Lengths: 30 to 72 inchesVertical Clearance: 48 to 72 inches

Custom Fixed Crane Fork sizes available.

extendable fork lift Boom (lB)WLL: 4,000 lbs

Reach: 7 to 12 ft in 1 ft incrementsForkTubes:2-1/2x7-1/2inches

Custom sizes available.

fork lift attachment hook cuffs (lhc)WLL: 3,000 lbs

ForkTubeWidths:4-1/2,5-1/2or7-1/2inchesCustom sizes available.

adjustable crane forks (acf)WLL: 1,000 to 50,000 lbs

Load Lengths: 30 to 72 inchesCustom Adjustable Crane Fork sizes available.

fork lift attachment hook Beam (lhB)WLL: 4,000 to 16,000 lbs

ForkTubes:7-1/2x2-1/2inchesCustom sizes available.

Skip Pan (SKP)All Trash Hoppers are built to your

needs, as an option, all seams can be fully welded to make each unit water tight.

Many different sizes, designs and capacities can be furnished.

fcf

lB-0712-4000

lhc5

acf

lhB5

SKIP PAN

Great for a fork truck or overhead crane.

custom fork Beam

elt has an engineering Staff to custom design all your Below the hook lifters.


Patented Wind turbine Lifting System

EnginEErED Lifting tEChnoLogiES


• ExceedsANSI/ASMErequirements.• Reducedmanpowerrequiredtoinstall.• Durablenickelplatedinserts.• Noloadbearingwelds.• Reducedcranetime.• Tighterboltclearanceholes.• Adjustableboltpattern.• Staginghooks(fixedandadjustable),nacellebeams, and hub brackets are also available.• Reducednumberofbrackets,onlyfourneededforentirelift.• Replaceableinsertstoaccommodatevarietyofboltpatterns.• Zincdichromateplatedbodyforoutstandingcorrosionprotection.

the gold StandaRd in wind tuRBine lifting!

a comPlete wind tuRBine lifting & eRecting SYStem!Includes:Brackets,Slings,Shackles,Bolts,Rigging&EngineeredLiftingPlans.

whY thiS light weight lifting SYStem?

other windmill industry equipment available

call elt today!855.800.9568

c h n ologi if e s r et e r e n e d i d w g t engineered ... · pdf filedesigner and...

Documents