cabled flexible linear
DESCRIPTION
ÂTRANSCRIPT
Clipping Simple
Europe
Hong Kong & Macau
Tel: +44 (0) 20 7620 1808
Tel : +852 2607 4268
www.optiled.comOPTILED
PVCTPU
24V DC
TPU cover provides protection
PVC body gives an extended life for the LED and prevent degradation
PC lens for enhanced optical performance
Braided wire heat sink makes connecting easy
Cut and Insert Mark
Structure
Cut, Clip, Press.
Incorporating advanced LEDs to emit up to 1000lm/m and up to 50,000 hours of high qualityperformance. (Best in class among same features)
Well designed for installations in harsh environments and underwater conditions.
Uses non-soldered connetions on an unbreakable flexible material to navigate corners easily.
No degradation or discolouration in direct sunlight enhances product durability.
Weatherproof
UV Resistant Seamless & continuouslength up to 20m
Fire Retardant
Increased longevity in coastal and marine environments.
Seamless & Continuous length up to 20m with accessories allows easy installation and maintains IP rating after cut & re-connection.
Fulfilled glow wire flammability and heat test at 650C for 30 sec, the contact point ignited becomes non-combustible within seconds providing an extra level of fire safety for environments of higher fire risks.
cabLED is tested with 200N / cm2 surface pressure test to guarantee product reliability.
Robust, Safe & Reliable
Plug & Play connection system Salt Water Resistant
Superior Brightnessand Quality
Significantly less energy consumtion than traditional light sources, generates up to 40% less heat than other LED Strips. No harmful ultra violet or infrared emission. RoHS-compliant and free of mercury and other toxic substances.
Energy-efficient and Eco-friendly
°,
UV/IR Protected, RoHS CompliantMaterialColour White
ApplicationIndoor (IP20)/ Outdoor (IP65)/ Outdoor (IP68)* *Available as special order only
Lightsource Other Details
CabLED 2000 4W
CabLED 2000
Specification
6W
CabLED 2000 8W
LED, Life Span 50,000 hours, CRI (Ra) 80, Beam Angle 120Dimmable via 1-10v and most TRIAC systems4W Per metre / 1W Per 1 segment =250mm167mA per metre / 42mA per 1 segment =250mmLED pitch 35.7mmFlame Retardant
2700K 370Im, 92Im/ W3000K 370Im, 92Im/ W4000K 400Im, 100Im/ W6500K 400Im, 100Im/ W
LED, Life Span 50,000 hours, CRI (Ra) 80, Beam Angle 120°,
°,
Dimmable via 1-10v and most TRIAC systems6W Per metre / 1.5W Per 1 segment =250mm 250mA per metre / 62mA per 1 segment =250mm
2700K 550Im, 92Im/ W3000K 550Im, 92Im/ W4000K 600Im, 100Im/ W6500K 600Im, 100Im/ W
Input Voltage 24V DC Min. Bending Radius 60mmMax. Connection Length ‘ 20mMax.Loading Force 2kgWeight 60 g/mOperating Temperature -20°C ~ +50°CStorage Temperature -25°C ~ +60°C
Input Voltage 24V DC Min. Bending Radius 60mmMax. Connection Length ‘ 12mMax.Loading Force 2kgWeight 60 g/mLED pitch 35.7mm
Flame Retardant Operating Temperature -20°C ~ +50°CStorage Temperature -25°C ~ +60°C
CabLED 2000 4W CabLED 2000 6W CabLED 2000 8W
CabLED 2000Our most energy efficient product to date with up to 100lm/W performance. A tiny profile dimension of just 12mm X 3.4mm fits almost anywhere. Built from a super flexible polymer compound that makes installation even easier.IP20- IP65 options. The 4W option can run a 20 metre length from a single driver. No soldering on connections.
LED, Life Span 50,000 hours, CRI (Ra) 80, Beam Angle 120°,Dimmable via 1-10v and most TRIAC systems 8W per metre/ 1W per segment= 175mm330mA per metre/ 54mA per segment= 175mm
2700K 740Im, 92Im/ W3000K 740Im, 92Im/ W4000K 800Im, 100Im/ W6500K 800Im, 100Im/ W
Input Voltage 24V DC Min. Bending Radius 60mm Max.Loading Force 2kgMax. Connection Length 10mWeight 75 g/mLED pitch 25mm
Flame Retardant Operating Temperature -20°C ~ +50°CStorage Temperature -25°C ~ +60°C
Warm White 4142273512Bright White 4142303512Natural White 4142403512Daylight 4142653512
Warm White 4127273512Bright White 4127303512Natural White 4127403512Daylight 4127653512
Warm White 2127272512Bright White 2127302512Natural White 2127402512Daylight 2127652512
3.4mm
12mm
Accessories- Connectors Accessories- Mountings
Flexible Coupler(4” / 6” / 12” / 24”)
4” 64014069056” 640140700512” 640140710524” 6401407205
6401406805
6401406505
6401407305 6200800603
6200800403
6401500105
6200800503
6401405405
6401403905
6401406705
Connects two CabLED strips with a 10cm / 4”, 15.2cm / 6”, 30.5cm / 12”, 61cm / 24” flexible cable.
PS-Link Connector
Used in all installations. Connects CabLED strip to power supply.
4 Way PS Splitter
Connects four CabLED strips to one power supply.
I-Connector
Connects two lengths of CabLED strips in a straight line. Use to extend a length of CabLED strip.
L-Connector
End Cap
Used in all instsallations. Protects end of CabLED strip that is not connectedto a connector.
1M Aluminium Extrusion (Single slot channel)
1M Plastic Flat Channeling
For single straight installation.To use with adjustable tile mounting.
Channel Bracket
1M Plastic DiffuserAdjustable Tilt Mounting
It installs easily with one screw and is barely visible after CabLED strip is snapped into place.
CabLED 2000
Used with Tilt Mounting and Flat Channeling for indoor applications only. Available in packs of 2.
For angle adjustments between 0-65 degrees. Must be used with 1M Plastic Flat Channeling. Two Adjustable Tilt Mounting units recommended per metre of product.
°,
UV/IR Protected, RoHS CompliantMaterialColour White
ApplicationIndoor (IP20)/ Outdoor (IP65)/ Outdoor (IP68)* *Available as special order only
Lightsource Other Details
CabLED 6000
Specification
LED, Life Span 50,000 hours, CRI (Ra) 80, Beam Angle 110Dimmable via 1-10v and most TRIAC systems9.6W Per metre / 0.28W Per 1 segment =30mm400mA per metre / 12mA per 1 segment =30mmLED pitch 30mmFlame Retardant
2700K 900Im, 94Im/ W3000K 900Im, 94Im/ W4000K 1000Im, 104Im/ W6500K 1000Im, 104Im/ W
°, Input Voltage 24V DC Min. Bending Radius 100mmMax. Connection Length ‘ 10mMax.Loading Force 6kgWeight 100g/mOperating Temperature -20°C ~ +40°CStorage Temperature -25°C ~ +50°C
CabLED 6000Performance up to 1000lm per metre, perfect for high output requirements. IP20 - IP65 options. Can run up to 10 metres from a single driver. No soldering on connections and can be cut every 25mm for precision installation.
Warm White 2080273012Bright White 2080303012Natural White 2080403012Daylight 2080653012
CabLED 6000
5.5mm
12mm
Accessories- Connectors
Flexible Coupler(4” / 6” / 12” / 24”)
4” 64014023056” 640140200512” 640140240524” 6401402505
6401406805
6401401905
6401401405
6401403905
6401401505
6401401605 6401401705
6401401805
Connects two CabLED strips with a 10cm / 4”, 15.2cm / 6”, 30.5cm / 12”, 61cm / 24” flexible cable.
PS-Link Connector
Used in all installations. Connects CabLED strip to power supply.
4 Way PS Splitter
Connects four CabLED strips to one power supply.
I-Connector
Connects two lengths of CabLED strips in a straight line. Use to extend a length of CabLED strip.
L-Connector
End Cap
Used in all instsallations. Protects end of CabLED strip that is not connectedto a connector.
CabLED 6000Accessories- Mountings
6200800603
6200800403
6401500105
6401500305
62008005036401500205
6200800303
6401405405
1M Aluminium Extrusion (Single slot channel)
1M Plastic Flat Channeling
For single straight installation.To use with adjustable tile mounting.
Channel Bracket
1M Plastic Diffuser
Adjustable Tilt Mounting
It installs easily with one screw and is barely visible after CabLED strip is snapped into place.
U-Connector
X-Connector
T-Connector
1M Angle Channeling
Edge BracketFor flush mount installations such as along a baseboard. Suitable for sue in high traffic areas.
Bridge Bracket
Holds CabLED strip securely in place using two screws.
For angle adjustments between 0-65 degrees. Must be used with 1M Plastic Flat Channeling. Two Adjustable Tilt Mounting units recommended per metre of product.
Used with Tilt Mounting and Flat Channeling for indoor applications only. Available in packs of 2.
DRIVER SPECIFICATION
Input Voltage
Rated Current
Rated Frequency
Input Voltage
Output Current
Total Power Output
Efficiency
Power Factor
Operating Temperature
IP Rating
Dimensions
CabLED LENGTH
6000
2000 4W
2000 6W
2000 8W
24V DC 18W 24V DC 30W 24V DC 60W 24V DC 100W
100-240V AC 100-240V AC 100-240V AC 100-240V AC
0.3A 0.3A 0.4A 0.6A
50/60 Hz 50/60 Hz 50/60 Hz 50/60 H
24V DC 24V DC 24V DC 24V DC
18W Max. 30W Max. 60W Max. 100W Max.
80% 80% 82% 82%
> 0.8 > 0.9 > 0.9 > 0.9
-20°C ~ +50°C -20°C ~ +50°C -20°C ~ +50°C -20°C ~ +50°C
IP67 IP67 IP67 IP67
120 L x 35 W x 28mm H 148 L x 46.5 W x 35mm H 185 L x 53 W x 40mm H 185 L x 53 W x 40mm H
0.75A Max. 1.25A Max. 25A Max. 4.16A Max.
≤ 1.6m ≤ 3m ≤ 6m ≤ 10m
≤ 4m ≤ 6m ≤ 14m ≤ 20m
≤ 2.5m ≤ 4m ≤ 9m ≤ 12m
≤ 2m ≤ 3m ≤ 7m ≤ 10m
Driver Options 2000/6000