carpet tutorial
TRANSCRIPT
-
8/12/2019 CARPET Tutorial
1/13
CARPET Tutorial (Vray for Sketchup) ERICK 1.insert a pillow
-
8/12/2019 CARPET Tutorial
2/13
2. stretch those four edges for a carpet look
3. and then stretch down the height approximately 10mm high
-
8/12/2019 CARPET Tutorial
3/13
4. apply your favorite carpet diffuse material (texture position as your preference scale)
-
8/12/2019 CARPET Tutorial
4/13
carpet diffuse map
-
8/12/2019 CARPET Tutorial
5/13
5. open the material editor, look for the linked carpet material and check bump and displacement
-
8/12/2019 CARPET Tutorial
6/13
6. bump settings (multiplier = 0.6)
-
8/12/2019 CARPET Tutorial
7/13
displacement settings (multiplier = 1.5)
-
8/12/2019 CARPET Tutorial
8/13
bump/displacement map
7. open the render options change the settings as per image shown (these settings where the real carpet will occur, the value 2 for the edge length(pix) should be the thickness of your carpet strands, the value 0.8 for the amount will be the length of carpet strands)
-
8/12/2019 CARPET Tutorial
9/13
8. i made a room for this tutorial
-
8/12/2019 CARPET Tutorial
10/13
9. and apply floor and wall material (interior lighting were set-up already at this point)
-
8/12/2019 CARPET Tutorial
11/13
10. inserted some components
-
8/12/2019 CARPET Tutorial
12/13
11. finished product
-
8/12/2019 CARPET Tutorial
13/13