60110 Bachelor of Engineering

Chemical and Process Engineering 2015 Note:

1. This guide is only available to students who are enrolled in the Chemical and Process Engineering program within the Bachelor of Engineering degree course prior to 2012.

2. Students enrolled in the Chemical and Process Engineering program must complete either, the Chemical and Process Engineering major (MJ-ECHEM) or the Hydrocarbon Processing major (MJ-ECHPR).

Course details

Total points required for this course – 192

Students must complete the following :

• Bachelor of Engineering foundation core units - 36 points;

• all units in Table 6.2.2Ba (Chemical and Process Engineering core units) - 102 points;

• one unit from Group A in Table 6.2.2Bb (Chemical and Process Engineering options) – 6 points; and

• a major in Chemical Engineering (MJ-ECHEM) as set out in Rule 6.2.2B.2 or the Hydrocarbon Processing major (MJ-EHCPR) in Rule 6.2.2B.3 - 24 points

• units to make up the remaining points required for the course from Groups B and C in Table 6.2.2Bb (Chemical and Process Engineering options) provided that no more than 12 points come from Group C

• a professional practicum of at least 12 weeks.

The following table is intended as a guide only. All units have a value of 6 points unless noted otherwise. Unit availability may be subject to change. For the most up-to-date information on unit availability, please consult the Timetable at http://www.timetable.uwa.edu.au/

60110 Bachelor of Engineering Chemical and Process Engineering Semester One Semester Two

Year One

MATH1020 Calculus, Statistics and Probability (no longer offered) MATH1010 Calculus and Linear Algebra (no longer offered)

PHYS1001 Physics for Scientists and Engineers (replaces PHYS1101 Advanced Physics A) ENSC1001 Global Challenges in Engineering (replaces ENSC1001 Engineering Challenges in a Global World or GENG1003 Introduction to Professional Engineering)

GENG1001 Introduction to Engineering Mechanics (Note 1) GENG1002 Introduction to Electrical and Electronic Eng. (Note 2)

CHEM1001 Chemistry - Properties and Energetics CHEM1002 Chemistry - Structure and Reactivity

Year Two MATH2040 Engineering Mathematics (Note 3) CITS2401 Computer Analysis and Visualisation (replaces GENG2140 Mod. & Comp.Analy.for Eng.)

ENSC3003 Fluid Mechanics (replaces CHPR2433 Fluid Mechanics) ENSC1002 Material Behaviour from Atoms to Bridges (replaces MATE1412 Materials Engineering 1)

ENSC3006 Chemical Process: Thermodynamics and Kinetics (replaces CHPR2431 Chemical Engineering Thermodynamics) ENSC3005 Mass and Energy Balances (replaces CHPR2530 Process Fundamentals)

Group B or Group C1 option ENSC3007 Heat and Mass Transfer (replaces CHPR2432 Heat and Mass Transfer)

Year Three

CHPR4406 Reaction Engineering (replaces CHPR3432 Chemical Kinetics and Reactor Design) GENG4402 Control Engineering (replaces CHPR3433 Process Dynamics and Control)

Major core unit ENSC3019 Unit Operations and Unit Processes (replaces CHPR3530 Process Modules)

Major core or Major option CHPR4405 Particle Mechanics and Solids Handling (replaces CHPR3434 Particle Technology)

Group B or Group C1 option Major core or Major option

Year Four

CHPR5551 Chemical Engineering Design Project 1 (replaces CHPR4401 Chemical Engineering Design Project Part 1)

CHPR5552 Chemical Engineering Design Project 2 (replaces CHPR4402 Chemical Engineering Design Project Part 2)

Major core unit or Group B or Group C1 option GENG5505 Project Management and Engineering Practice (Group A option)

CHPR4411 Chemical and Process Engineering Project Part 1 CHPR4412 Chemical and Process Engineering Project Part 2

Group B or Group C1 option Major core unit or Group B or Group C1 option

Note 1: Students requiring GENG1001 must complete ENSC2001 Motion and ENSC1002 Materials Behaviour from Atoms to Bridges.

Note 2: No longer offered, completed ENSC2002 Energy if required.

Note 3: Students requiring MATH2040 must complete MATH1002 Mathematical Methods 2.

1 no more than 12 points come from Group C

Bachelor of Engineering component

Table 6.2.2Bb—Chemical and Process Engineering options

Group A

S1, S2 GENG5505 Project Management and Engineering Practice (replaces ELEC4332 Project Engineering Practice)

N/A MECH4400 Engineering for Sustainable Development (no longer offered)

Group B

S2 CHEM2002 Physical and Analytical Chemistry (replaces CHEM2220 Analytical and Physical Chemistry)

N/S CHPR4404 Advanced Thermodynamics (replaces CHPR4531 Advanced Prediction of Fluid Properties)

N/S CHPR4407 Transport Phenomena

N/A CHPR4432 Special Topics in Mineral Processing (no longer offered)

S1 CHPR5501 Advanced Reaction Engineering and Catalysts (replaces CHPR4431 Advanced Reaction Engineering)

N/S CHPR5521 Gas Processing 1 – Flow Assurance and Gathering

N/S CHPR5522 Gas Processing 2 – Treating and LNG Production

S1, S2 CITS2401 Computer Analysis and Visualisation (replaces CITS1005 Computing for Engineers and Scientists

N/A CIVL3170 Introduction to Offshore Engineering (no longer offered)

N/S ELEC5506 Process Instrumentation and Control (replaces ELEC3320 Process Instrumentation and Control)

S1 ENSC3004 Solid Mechanics

S2 ENSC3018 Process Synthesis and Design (replaces CHPR4530 Process Systems)

N/A ENVE2605 Environmental Engineering Design and Management (no longer offered)

N/A ENVE3605 Mathematical Applications in Environmental Engineering (no longer offered)

N/S ENVE5502 Wastewater Engineering: Treatment and Resource Recovery (replaces ENVE4609 Water and Wastewater Treatment)

S1 GENG4403 Extractive Metallurgy (replaces CHPR3412 Extractive Metallurgy – Principles, and CHPR3413 Extractive Metallurgy - Technologies)

S2 GENG4405 Numerical Methods and Modelling

S1 GENG5503 Modern Control Systems (replaces MECH4423 Advanced Control Engineering)

S2 GENG5504 Petroleum Engineering (replaces PETR2510 Petroleum Engineering Fundamentals)

N/A GENG5506 Renewable Energy (replaces CHPR4403 Future Energy)

S1, S2 GENG5507 Risk Reliability and Safety (replaces ASST4403 Reliability Engineering)

S1 GENG5514 Finite Element Methods (replaces MECH4405 Design Tools: Finite Element Modelling)

S1, S2 MECH3402 Engineering Project 11

S2 MECH3403 Mechanical Design

S1 MECH3406 Engineering Project 2 1

N/A MECH4407 Engineering Tribology and Maintenance (no longer offered)

N/S MECH4426 Dynamics, Vibration and Sound (replaces MECH3404 Vibration and Signal Processing)

S1 MECH4428 Degradation of Materials (replaces MECH3405 Structural Integrity)

S1 MECH4429 Applied Engineering Thermodynamics (replaces MECH3401 Thermofluids 3)

S2 MINE5501 Mining Management (replaces MINE4165 Mining Management)

N/A OGEG2500 History, Economics and Geopolitics of Oil and Gas (no longer offered)

N/A PETR3510 Drilling and Completion Engineering (no longer offered)

N/A PETR3511 Reservoir Engineering

S1 PETR3512 Reservoir Characterisation (only available as a ‘reading only’ unit with Special Approval)

N/A PETR4510 Production Optimisation

S2 PETR4511 Reservoir Simulation

N/A PETR4512 Reservoir and Well Performance

Group C

units chosen with the special approval of the Faculty on the recommendation of the Head of the School of Mechanical and Chemical Engineering from those available within the University 2 1 Available with permission from the Head of School of Mechanical and Chemical Engineering. A special approval form is required.

MAJORS

• Chemical Engineering major (MJ-ECHEM) - The Chemical Engineering major comprises:

1. all units in Table 6.2.2Bc (Chemical Engineering major core units) below – 18 points

N/S CHPR4404 Advanced Thermodynamics (replaces CHPR4531 Advanced Prediction of Fluid Properties)

N/S CHPR5522 Gas Processing 2 - Treating and LNG Production (replaces GENG4405 Numerical Methods and Modelling or CHPR3531 Process Modelling)

S1 CHPR5501 Advanced Reaction Engineering and Catalysts (replaces CHPR4431 Advanced Reaction Engineering)

2. one unit from Table 6.2.2Bd (Chemical Engineering major options) below– 6 points

S2 CHEM2002 Physical and Analytical Chemistry (replaces CHEM2220 Analytical and Physical Chemistry)

N/S ELEC5506 Process Instrumentation and Control (replaces ELEC3320 Process Instrumentation and Control)

• Hydrocarbon Processing major (MJ-EHCPR) - The Hydrocarbon Processing major comprises:

1. all units in Table 6.2.2Be (Hydrocarbon Processing major core units) below - 18 points

N/S CHPR4404 Advanced Thermodynamics (replaces CHPR4531 Advanced Prediction of Fluid Properties)

N/S CHPR5522 Gas Processing 2 - Treating and LNG Production (replaces GENG4405 Numerical Methods and Modelling or CHPR3531 Process Modelling)

S2 ENSC3018 Process Synthesis and Design (replaces CHPR4530 Process Systems)

2. one unit from Table 6.2.2Bf( Hydrocarbon Processing major options) below – 6 points

N/S ELEC5506 Process Instrumentation and Control (replaces ELEC3320 Process Instrumentation and Control)

S2 GENG5504 Petroleum Engineering (replaces PETR2510 Petroleum Engineering Fundamentals) \

Key to availability of units:

S1 = Semester one S2 = Semester two N/S = Non-standard Teaching Period, refer to handbook for details. N/A = Not available in 2015