coir inlay logo mat no - machine tools · coir inlay logo mat no.680 features & benefits coir...

Coir Inlay Logo Mat No.680

Features & Benefits Coir matting has been around for centuries. Now there is a way to make it into a Logo! With our 2 colour tone laser cut design this matting is a standout for a recessed grand entrance.

This product is made from Coconut fibres and is a fantastic way to scrape dirt from shoes with its 'brush like surface' without losing the integrity of the mat.

Standard Mat Sizes Custom sizes available up to 2 metre widths.

Mat Specifications Surface: 100% natural coir (coconut husk fibres) Backing: PVC Thickness: 17mm Care: Vacuum or sweep Foot Traffic: Medium / High Area: Wet or Dry Edge: Unedged Cross Sectional:

DirtStopper Logo Mat #715

Features & Benefits Combined with the durable DirtStopper mat and our in house speciality raised printing technique, this mat will grab the attention at any entrance.

Dirtstopper mats have a natural fleck through them that easily hides dirt and debris off shoes. The logo is 1mm higher than the matting giving it the 'Wow' effect. This mat is UV stable and rot resistant with a low profile edging.

This type of matting is suited to 1 or 2 colour logo.

Standard Mat Sizes 600mm x 900mm 900mm x 1200mm 900mm x 1500mm 900mm x 1800mm *Custom sizes are also available.

Mat Specifications Surface: Carpet / polypropylene Backing: Chemical resistant vinyl Thickness: 8mm Care: Vacuum, sweep or hose Foot Traffic: Medium / high Area: Dry Edge: Low Profile Cross Sectional:

Jetprint Logo Mat #515 Logo & Message Mats – 7mm thick

Features and Benefits

Not only do the Jetprint logo mats create a visually attractive and unique entrance, they protect floors against the damaging effects of dirt, grit and dust.

In modern businesses today, image is vital. It must be professional, yet distinctive and a mat featuring a company logo, or other relevant design can help reinforce a corporate identity.

Ideal for entrances, lobbies, foyers, reception areas, and high traffic areas.

Endless design options. All recessed mats will be supplied OVERSIZED to enable you to cut it

into the existing frame.

Mat Specifications No minimum order quantity Lead time for artwork proofs: 24 hours Lead time to produce mats: 3-4 weeks from approval of proofs Uses: Interior, exterior entrances Surface Fibre: 100% nylon (fully launderable) Backing: 100% nitrile rubber Warranty: 3 years Colours: As per chart below

Mat Stock Sizes*

Minimum length being 600mm and maximum length being 6000mm the logo mat can be made into any size within these dimensions but also comes in standards sizes below.

600mm x 850mm 850mm x 1150mm 850mm x 1500mm 850mm x 1800mm 850mm x 3000mm 1150mm x 1500mm 1150mm x 1800mm 1500mm x 2400mm

1500mm x 3000mm 1500mm x 3900mm

Minimum width 600mm Maximum width 1800mm

http://www.matting.com.au/resources/website/files/Kleentex Colour Chart.pdf

Printed Welcome Logo Mats #501 Entrance Mats – 7mm thick

Features and Benefits

Message mats capture 80% of the dirt, dust & moisture. They also provide employees with a valuable reminder of quality & safety. 100% nylon static dissipative pile resulting in outstanding dirt and moisture pick up. State of the art Ink Jet Print technology giving high definition with bright & vibrant colours. 100% nitrile rubber backing ensures the mat lays flat and does not curl or cockle.

Welcome Mats:

Why not double the value of your service by providing a welcome mat that not only provides cleaner safer floors but delivers a welcome message to staff and visitors alike.

Mat Specifications

Uses: Interior, exterior entrances Surface Fibre: 100% nylon (fully launderable) Backing: 100% nitrile rubber Warranty: 2 years conditional Colours: Red with black writing or Black with red writing,

Mat Stock Sizes

850mm x 1500mm 1150mm x 1750mm

Sales & Technical Information

Contents• Introduction – Step up your next promotion!

• What is PromoDek?

• How it works

• What makes PromoDek® unique

• Standard elements – technical information

• Ideas for inlays

• Endless possibilites

• Custom additions

• Custom options

• Element color options

• Optimal strength / storage

• Sample assembly instructions

• Assemby tip

• Sample layout

• Graphic layout tip

• Calculation form

• Warranty information

• Notes & Scribbles

4

5

6

6

7

14

15

16

17

18

19

20

22

23

24

25

26

27

3

Stepping up your promotion has never been this easy to do! Standing out from the crowd ensures that your brand message gets noticed where it really matters.

PromoDek® offers the easiest and most flexible solution to step up your next promotion, event or trade show. Whether showcasing a new model of automobile, adding dimension to the trade show floor or demonstrating a new product, PromoDek® offers endless possibilities to bring your pro-motion to a whole new level.

Step up your next promotion!

4

What is PromoDek?PromoDek® is an easy-to-use modular floor display system that is effortlessly assembled and updated in minutes. By adding your company colors, graphics or virtually any material to PromoDek®, you can create your very own unique atmosphere on a raised platform setting.

• Create a platform of any size or shape• Unique and multifunctional• Update your images or inlays within minutes• No tools required• Easy to maintain and reposition• Reusable for all your campaigns, trade shows and events

PromoDek® is designed for indoor use and requires a hard and flat floor surface for optimal stability.

5

How it works

What makes PromoDek unique

PromoDek® consists of standard building ele-ments that are easily assembled in any shape or form. You can use either 10 square feet of PromoDek® to showcase a new product or 500 square feet to raise the floor at a trade show.

The unique design of PromoDek® allows for quick and easy surface updates without the use of tools, glue or fasteners. The patented raised edge on the PromoDek® basic elements ensure that the inlays remain firm in place. This allows for the use of transparant inlays in combination with printed graphics.

6

Standard elementsThe standard building elements from PromoDek® work seamlessly together to create an exceptional platform.

7

Basic Extra Large The basic extra large element is designed for quick installations with its integrated connectors on 2 sides. There are 4 openings on the top side designed to feed wires through for EL lighting sheets.

standard color : dark greyproduct size : 19.69 x 19.69 inchinlay size : 19.58 x 19.58 x 0.12 inchgraphics size : 19.57 x 19.57 inch (excluding connectors)height : 1.38 inchweight : 2.86 lbsmaterial : ABSfire class : B2product num. : 101900

Basic LargeThe basic large element is 1/4 the size of the basic extra large.

standard color : dark greyproduct size : 9.84 x 9.84 inchinlay size : 9.68 x 9.68 x 0.12 inchgraphics size : 9.67 x 9.67 inchheight : 1.38 inchweight : 0.93 lbsmaterial : ABSfire class : B2product num. : 101000

Standard elements

8

Basic MediumThe basic medium element is 1/2 the size of the basic large element.


Basic SmallThe basic small element is 1/2 the size of the basic medium element.


Standard elements

9

FrameThe unique frame with its twist and click system provide a quick and safe finished edge to the PromoDek® platform.

standard color : dark greyproduct size : 3.94 x 9.84 inchheight : 1.38 inchweight : 0.33 lbsmaterial : ABSfire class : B2product num. : 101300

CornerThe corner pieces join the frames together to complete the platform.


Standard elements

10

Connector / AdapterThe connectors join the basic elements and frame together. These remain unseen under the PromoDek® platform.

standard color : whiteproduct size : 2.32 x 2.32 inchheight : 0.79 inchweight : 0.04 lbsmaterial : ABSfire class : V0product num. : 108000

Frame+The frame+ is a modified frame element designed to allow a cable to run from under the platform.


Standard elements

11

Inside Corner SetThe inside corner set are modified frames cut to 45 degrees.

color : dark greyproduct size : 3.94 x 9.84 inchheight : 1.38 inchweight : 0.33 lbsmaterial : ABSfire class : B2product num. : 101500 / 600

Corner+The corner+ set is a modified corner that allow posts or other materials to be easily fastened. Set comes with modified corner, adapter piece, screw and allen key.


Standard elements

12

Levelling footThe levelling foot fits into all of the basic ele-ments to provide easy levelling capabilities from the top side with a screwdriver.

standard color : black / metalheight : adjustableweight : 0.03 lbsmaterial : plastic / metalproduct num. : 108100

Optional ScrewsFor added stability or when placing heavy machi-nery or vehicles on the PromoDek® platform, it is recommended to fasten the adapters to the basic elements using 1” screws.

IMPORTANT:Do not use screws longer than 1 inch as these may extend past the white adapters and damage the floor.

recommended screw size : #5 or #6max. screw length : 1 inch

Standard elements

13

Ideas for inlaysAlong with the flexibility of size and shape, the surface area of PromoDek® can be quickly and easily updated. Within minutes, you can update the complete surface area of PromoDek® with new colors, printed graphics or materials including aluminum, HPL or illuminated EL foil.

Graphics in combination with transparent inlays are most commonly used as this offers the most flexibilty. Paper prin-ted with a solid color and protected with a transparent inlay provide a quick and effective solution for colored tiles.

There are several types of materials to choose from for transparent inlays including:• Basic polycarbonate• Abrasion resistant polycarbonate from LEXAN®• NFSI (national floor safety institute) certified CleargriP®

14

Endless possibilitiesThere are many accessories that can be easily adapted to work with PromoDek®. From simple brochure holders to the hi-tech digital FloorCaster® system, PromoDek® literally provides you with a platform to help build your brand on.

Using EL foil to light up the panels

EL (electroluminescent) foil

Digital FloorCaster®

15

Custom additionsBecause of the modular nature of PromoDek®, third party display manufacturers can easily adapt the base of their displays to fit into the PromoDek® system. Wall displays, brochure holders and banners can be integrated into the PromoDek® to create a complete solution.

16

Custom optionsAs an alternative to frames, a custom strip may also be used tp create a straight edge. If necessary, replacing the frames with strips will help to stay within the boundries at tradeshows. This will also provide a lower cost alternative to frames.

S tep 1: drilling into bar ( edge S trip )

S tep 2: Even drilling with srews into Module PromoDek

Material - X - thickness 3 mm

ab

out2

50 m

m

Self-drilling srews for Plastics

35 m

m

35 m

m9 m

m

16 m

m s

elf-

adhe

or without drill, with self-adhesive band

17

Color optionsThe standard PromoDek® elements are produced in dark grey. Dark grey is the most practical color used to mask any dirt or scratches that may appear from general use.

Your customer may require that the complete platform be designed in their own brand colors. This is possible as we can produce all of the PromoDek® elements in hundreds of standard colors.

Minimum order quantity for colored elements is 825 square feet. Additional charges may apply.

18

Optimal strengthIn addition to being an exceptional presentation platform, PromoDek® is very durable and canwithstand up to 2,750 lbs per 4x4 inches.

And with all this strength, PromoDek® is also very lightweight and compact requiring minimal space for storage and shipping. That’s over 590 square feet of PromoDek® on a single pallet.

19

Step 1.Join all of the the extra-large pieces together to form the basic platform.

Step 2.Add the white adapters where necessary as shown in the above diagram.

Step 3.Add the large pieces around the extra-large pieces

Step 5. (Optional)When placing heavy objects on the PromoDek platform, it is recommended to fasten the complete platform together with #5 or #6 1 inch screws at all of the connecting points.IMPORTANT: Do not use screws longer than 1 inch as these may extend past the white adapters and damage the floor.

Step 4.Add another row of white adapters along the outside of the platform

Contents Layout Diagram

Basic Extra Large x 4

Basic Large x 24

Frame x 28 Corner x 4

Extra Large Inlay x 4

Large Inlay x 24

Adapter x 39

Sample PromoDek® Assembly Instructions

Step 6.Join the frames and corners by gently twisting and clic-king them together.

Step 7.Once the platform is assembled, you can add the posters and then the transparent inlays.

IMPORTANT:Do not use a wet mop to clean the PromoDek® surface. Use only a non-agressive cleaning spray and a clean cloth.

Sample PromoDek® Assembly Instructions

1

3

5

2

4

6

21

Assembly tipDepending on the layout and position of the PromoDek® platform, there are several tips to save time during installation. Because the basic extra large element is most commonly used, there are a few things to keep in mind.

For example, to ensure a quick and easy set-up for an exhibition stand with 2 open ends, find your starting point and start assembling the PromoDek® extra-large elements with the adapters poin-ting outwards. This way there are no additional connector pieces required.

22

Sample layoutFor Mercedes in Spain, our dealer was required to install 75 platforms throughout Spain in only 2 days. It was impertitive that they had a good plan to work from inclu-ding the layout for the basic elements and the layout for graphics. Mercedes Spain used a combination of basic extra large and basic large elements to build their plat-form. Using the basic large elements requires additional connectors shown in the technical drawing below. Mercedes Canada chose for the same size platform using only basic extra large elements. This provides for a faster installation and also reduces the cost of the platform.

Mercedes Spain 10’x20’

Mercedes Canada 10’x20’

23

Graphic layout tipBecause of its unique design and the separate elements required to complete a PromoDek® plat-form, there are some helpful tips when designing and producing graphics.

The PromoDek® basic elements have a raised edge around its perimeter to ensure that the inlays and graphics remain firm in place. This raised edge is 3/32” wide creating a 3/16” gap between any 2 inlays or graphics. To obtain the best results when using graphics and text that flow from one element to another, we recommend to remove the artwork where the 3/16” gap lies.

Dividing the graphics up into tiles for printing and compensating for the 3/16” gap can be easily achieved using Adobe Illustrator CS4 and higher.

Paper weight for graphics: It is recommended to use a thinner card stock (80lb cover) to ensure that the graphics remain looking their best.

24

Calculation formThe easy-to-use Excel form calculates exactly the elements that you need to complete a full PromoDek® platform. Simply fill in the size and the calculation form will recommend how many of each element are required. In the example below, the forms shows that the PromoDek® platform still requires 72 frames to be completed.

test

Customer Name:

Contact Person:

Project Name:

Quotation Number:

Date:

STEP 1 - Enter the platform size in meters

PromoDek¨ Platform SizeEnter Size in

Meters cm

Length (excluding frames) 3.00 300

Width (excluding frames) 6.00 600

Platform Size (square meters) 18.00

Length including frames 3.20 320

Width including frames 6.20 620

STEP 2 - Choose the elements to build your platform

PromoDek¨ Elements Elements per m2 Enter Quantity Required Quantity

PromoDek Basic Extra Large (50/50) 4 72 ok

PromoDek Basic Large 16 0 ok

PromoDek Basic Medium 32 0 ok

PromoDek Basic Small 64 0 ok

PromoDek Frame 16 0 72

PromoDek Corner 4 4 ok

PromoDek Adapter n/a 40 ok

ClearGrip Inlay Extra Large (50/50) 4 72 ok

Cleargrip Inlay Large 16 0 ok

Cleargrip Inlay Medium 32 0 ok

Cleargrip Inlay Small 64 0 ok

STEP 3 - Enter the number of platforms

Number of platforms 1

STEP 4 - Review Quotation

Review Customer Quotation >>

Review Reseller Quotation >>

Review Certified Reseller Quotation >>

Calculation Form

Optional CleargriP Inlays

Customer Name

PromoDek Project

10000001

01-01-12

Mr. O. Customer

25

Warranty

26

Warranty Information for PromoDek®

One-Year Limited WarrantyWindo Displays (“WD”) warrants only to the original purchaser of this Product from a WD-authorized reseller or distributor that this product will be free from defects in material and workmanship under normal use and service for one year after date of pur-chase.

The Product may also not be older than 3 years. This information can be found on the backside of the Product.

In order to keep this limited warranty in effect, the Product must have been handled and used as prescribed in the instructions accompanying the Product. This limited warranty does not cover any damage due to transport, accident, misuse, abuse or negli-gence.

If within the warranty period the Product is unusable due to defects in material and workmanship, WD will then repair or repla-ce the product at no charge. WD reserves the right, before having any obligation under this limited warranty, to inspect the unusable or damaged Product. Therefore the mentioned conditions and restrictions mentioned below apply. All unusable or damaged Products that are replaced become property of WD.

The original purchaser can return the Product at their own risk. All costs of shipping the Product to WD for inspection shall be borne solely by the original purchaser. In order to recover under this limited warranty, the original purchaser must make claim to WD within 30 days of occurrence, and must present acceptable proof of original ownership (such as original receipt or other documentation WD deems acceptable) for the Product. If the Product is covered by the warranty, the replacement Product will be returned at no charge to the original purchaser.

This limited warranty does not cover any damage due to transport, accident, misuse, abuse or negligence. Neither does it cover any damage as a result of normal wear and tear or distortion by normal use. This limited warranty is non-transferable and does not apply to any purchaser who bought the Product from a reseller or distributor not authorized by WD, including but not limi-ted to purchases from internet auction sites. This warranty does not affect any other legal rights you may have by operation of law. Contact WD or your local authorized reseller or distributor for warranty service procedures.

Limitation of LiabilityRepair or replacement of this Product, as provided herein, is your exclusive remedy. WD shall not be liable for any special, inci-dental, or consequential damages, including but not limited to, lost revenues, lost profits, damage to property, and third-party claims, arising out of any theory of recovery, including warranty, contract, statutory or tort, notwithstanding the term of any limited warranty or any warranty implied by law, or in the event that any limited warranty fails of its essential purpose, in no event will WD’s entire liability exceed the purchase price of this Product.

If the instructions for use, assembly and/or maintenance are not carried out, WD, its distributors and manufacturer are not lia-ble. WD, its distributors and manufacturer are never liable for indirect damages.

Normal use and service instructions for qualifying for warranty claimsNormal use and service of the product implies the following:The product is an (advertising) display and should be treated like that,The product is for inside use only,The product should not be exposed to direct sunlight,The product should only be placed on a flat surface,The product should be cleaned on a regular basis or as often as the floor itself,The product should only be hand cleaned with a non-scratching detergent and a clean dry cloth,The product should not be driven over or exposed to any heavy equipment or machines including lift trucks, pallet trucks, etc.

Notes & Scribbles

27

PromoDek® is a registered trademark of Windo® Displays • Visit www.windodisplays.com for more information.

Safety Scrape Logo Mat No.390

Features & Benefits Safety Scrape Logo Mat is an all-round, all weather mat that is suitable for most areas where you want to dry feet and still have a professional impression.

Made from 100% Natural Rubber this matting is a great alternative to carpet style logos.

Tough and durable, this mat will hold dirt and spills whilst continuing to display a vibrant logo. Suited to both full colour digital print and spot colour artwork, the Safety Scrape Logo Scraper Mat is both functional and durable.

Standard Mat Sizes 600mm x 850mm 850mm x 1150mm 850mm x 1500mm 850mm x 3000mm 1150mm x 1800mm 1800mm x 1800mm 1800mm x 2400mm

Mat Specifications Surface: Rubber Backing: Rubber Thickness: 6mm Care: Sweep, shake or hose Foot Traffic: High volumes Area: Wet and Dry Edge: Cross Sectional:

Spiral Loop Inlay Mat #366

Features & Benefits A vinyl loop scraper mat that can have a backing added or can let the liquid flow through.

Great for bare feet this mat is designed from thin vinyl strings that join together creating a fantastic looking mat that is designed to last. This mat is specifically designed to dry quickly.

Made from non-absorbent vinyl this mat is easily cleaned as it can be just hosed down.

A choice of many colours for you to make this logo mat one of a kind for your business.

Standard Mat Sizes 600mm x 850mm 850mm x 1500mm 850mm x 3000mm 1150mm x 1800mm 1150mm x 2400mm

Mat Specifications Surface: Vinyl Backing: PVC Thickness: 17mm Care: Vacuum or Hose Area: Wet and Dry Edge: Can come edged or unedged

UltraGuard Inlay #535

Features & Benefits The UltraGuard Logo Inlay Mat is manufactured using high quality, durable, stain resistant polypropylene carpet. This style of carpet allows us to craft unique mats that combine stability and functionality with impeccable image presentation.

*Suited to multidirectional high foot traffic applications

* Stain resistant, colourfast and permanently anti-static

* Easy to clean, just vacuum or hose down.

* Logo Design is cut and secured into the base for a high quality image presentation

Standard Mat Sizes 850mm x 1500mm 850mm x 1200mm 850mm x 3000mm 1150mm x 1800mm 1150mm x 2400mm 1150mm x 3000mm 1800mm x 2400mm 1800mm x 3000mm 1800mm x 3600mm

Mat Specifications Surface: Carpet/propylene Backing: Rubber Thickness: 8mm approx. Care: Vacuum or hose Foot Traffic: Very High Area: Wet or Dry Edge: For recess or can be bevelled

coir inlay logo mat no - machine tools · coir inlay logo mat no.680 features & benefits coir...

Documents