convia controls - usgbc homepage · case study one study done for a ... herman miller developed...
TRANSCRIPT
EnergyReporting
SpaceUtilizationReporting
Energy TrackReporting ToolTM
DaylightHarvesting
OccupancySensors
HVAC
OngoingOptimization
Real EstateReductions
IncreaseUtilization
Rates
ImproveOverall
Productivity
Convia® andConvia Enabled products
from Wiremold®,make flexible, sustainable
spaces possible.Tap into better energy management solutions
with Convia.
LightingControl
HVACSet Points
DaylightHarvesting
OccupancySensing
TimedShutdowns
Plug LoadManagement
SmartWorkstations
DemandResponse
Energy Management
LightingControl
Plug LoadControl
HVACControl
Auto DemandResponse
Convia, an integrated energy management
platform that combines ease of use with innovation and
flexibility.
“We contribute to a better world
by pursuing sustainability and environmental wisdom…
By participating in the effort, we lift our spirits and
the spirits of those around us.”
— from Herman Miller’s Corporate Values
“There’s a growing recognition that the Green Building movement
is still missing a key element—measurement and analysis.
We are excited about Convia because it will allow for continuous
improvement and once and for all prove that Green Building
makes economic sense as well as environmental sense.”
—Roy Abernathy of Jova/Daniels/Busby Architecture
®
Performance Reporting
Integrated Control
Integrated ControlPut Convia Controls to work in your building. Convia Controls allow you to create
a responsive and energy efficient environment.
• •• •
• •• • •
• • • •• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •••••••••••••••••••••••••••••••••••••••••
••••••
••••
••••••••••••••••• •• •• •• •• ••
kWh Global Gateway
˚60
˚60
˚60
˚60
Plug Load Management
LightingControl
DaylightHarvesting
OccupancySensing
HVACSet Points
TimedShutdowns
SmartWorkstations
by Herman Miller
DemandResponseStrategies
• •• •
• •• • •
• • • •• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •••••••••••••••••••••••••••••••••••••••••
••••••
••••
••••••••••••••••• •• •• •• •• ••
kWh Global Gateway
˚60
˚60
˚60
˚60
The Global Gateway is a desktop application that gives facility
managers choices in how they integrate energy management
solutions throughout a building.
The Global Gateway can also be used to give individuals
control over their workstation environments.
®
Integrated energy management strategies mean a single
occupancy sensor can turn off lights and plug loads and
adjust HVAC set points when an employee leaves an office.
Intelligent workstations turn-off plug loadsand overhead lighting when unoccupied.
Convia’s Sensor Interface Module (SIM)allows you to use the Convia Wand to virtually
rewire occupancy sensors on demand.
Shutting down battery chargers still plugged insave a company up to 5% of it’s overall
power usage at any given time.
Integrated Control
A well designed control system is able
to share component and labor costs across different types of
controls and thereby reduce overall costs. Because the Convia
framework facilitates integrated design, it accommodates
associated cost benefits.
For example, a single Convia controlled occupancy sensor
can be used to trigger a number of energy management
strategies. When someone enters a conference room, the
occupancy sensor triggers lights and plug loads to turn on and
changes the thermostat set points. Design with Convia means
achieving a higher resolution of control because clients can
use just one device to achieve multiple control strategies.
Plug Load Control
The US Department of Energy estimates
that office plug load represents 26% of energy use in
commercial offices.
Battery chargers left in are still drawing power. This
represents up to 5% of a company’s overall power usage at
any given time, and adds up to more than $3 billion in annual
energy costs in the US.
HVAC Control
According to the US Department of Energy,
HVAC accounts for 40 to 60 percent of the energy used
in commercial buildings, and represents a significant
opportunity for energy savings. Setting building temperatures
lower during unoccupied times can save energy by reduced
heating or cooling needs. Shutting down a space heater can save a
company more than $22 per year.
The Global Gatewaydesktop application can be used to give individuals control
over their workstation environments.
The Convia Wand can re-associate light fixtures with different switches simply by pressing a
button. No electrician required.
Shutting off a single desk lamp throughConvia’s Plug Load Control can save nearly
$9 per year, per lamp, in energy costs.
The Convia Global Gateway lets users program lights, switches and sensors from
the convenience of a PC.
+ +
˚
TAX• • • • • ••
˚
TAX• • • • • ••
Convia Energy Controls atthe USGBC Headquarters,
Washington D.C.
Phot
o C
redi
t: Er
ic L
aign
el
With Convia, HVAC can beintegrated into a company’s energy management approach. The same occupancy sensor used to
manage lighting and plug load can also be used to manage thermostat set points.
Convia measures actual energy consumption at a zone level so facility managers can measure the impact of their energy saving strategies.
Daylight and occupancy sensors can be added at any time with plug and
play simplicity.
Once an occupancy sensor determines a space is empty, the Convia system will compensate by
adjusting the thermostat to an energy saving setting.
The Convia Global Gateway
Traditional control systems are notoriously difficult
to program and often involve calling the manufacturer to
send a technician to set the programming. The Global
Gateway allows facility managers to take control of their
facility. A facility person with general PC abilities can program
lighting, electrical and HVAC events.
Demand Response
Convia’s integrated controls enable most companies to
participate in the most lucrative of initiative, Auto Demand
Response Programs. In addition, companies using load
balancing can be eligible for significant tax reductions.
EPACT Legislation
A tax deduction of up to $1.80 per square foot
is available to owners or designers of new or existing
commercial buildings that save at least 50% of the heating
and cooling energy of a building that meets ASHRAE
Standard 90.1-2001. Partial deductions of up to $.60 per
square foot can be taken for measures affecting any one
of three building systems: the building envelope, lighting,
or heating and cooling systems. These tax deductions are
available for systems “placed in service” from
January 1, 2006 through December 31, 2013.
In addition to saving moneyon monthly bills, companies that employ energy saving strategies may also qualify for Demand
Response programs and federal, state andlocal tax credits.
+ +
+ +
˚
TAX• • • • • ••
Daylight harvesting sensors can be virtually re-wired with the Convia wand based on the
changing seasonal lighting conditions.
Phot
o C
redi
t: Er
ic L
aign
el
Convia Energy Controls atthe USGBC Headquarters,
Washington D.C.
Cost Efficient Controls
Convia installs for a relatively small premium over traditional pipe and wire and is significantly lower in cost than traditional control systems.
ROI of Building Controls
More Functionality
More Control
More Flexibility
More Information
Lower Cost
FlexibleElectrical
Distribution
LightingControl
TechnologyIntegration
RobustReporting
TraditionalElectrical Infrastructure
Convia
TraditionalControl Products
$ $ $ $ $
LoadBalancing
kWh
kWh
Traditional Electrical Infastructure
Convia
Traditional Control Products
FlexibleElectrical
Distribution
LightingControl
TechnologyIntegration
RobustReporting
TraditionalElectrical Infrastructure
Convia
TraditionalControl Products
$ $ $ $ $
LoadBalancing
kWh
kWh
FlexibleElectrical
Distribution
LightingControl
TechnologyIntegration
RobustReporting
TraditionalElectrical Infrastructure
Convia
TraditionalControl Products
$ $ $ $ $
LoadBalancing
kWh
kWh
FlexibleElectrical
Distribution
LightingControl
TechnologyIntegration
RobustReporting
TraditionalElectrical Infrastructure
Convia
TraditionalControl Products
$ $ $ $ $
LoadBalancing
kWh
kWh
FlexibleElectrical
Distribution
LightingControl
TechnologyIntegration
RobustReporting
TraditionalElectrical Infrastructure
Convia
TraditionalControl Products
$ $ $ $ $
LoadBalancing
kWh
kWh
FlexibleElectrical
Distribution
LightingControl
TechnologyIntegration
RobustReporting
LoadBalancing
$
$ $ $
$ $ $ $ $ $ $ $ $
Investing in controls for your building has a positive ROI.
LEED buildings command rent premiums of $11.24 per square foot over non-LEED buildings and have
3.8% higher occupancy. Energy Star buildings command rent premiums of $2.38 per square foot and
have 3.6% higher occupancy.
Source: CoStar
Energy Star buildings are selling at an average of $61 per square foot higher than their peers, while
LEED buildings command a $171 per square foot premium.
Source: CoStar
Every dollar invested in an energy efficiency upgrade can produce between $2 and $3 in increased
asset value, which can make commercial properties more attractive to buyers and lenders.
Source: Energy Star
A 30% reduction in energy use (commonly achievable in the average commercial office building) can
yield the equivalent of a 5% increase in Net Operating Income (NOI) and overall asset value.
Source: Department of Energy
.
®
LEED and Convia
Energy & Atmosphere
Indoor Environmental
Quality
Innovation InDesign
RegionalPriority
5 to 29
8 to 18
4
4
1 to 5
1 to 5
1 to 4
1 to 4
NC
CI
Total Possible Points = 23 to 34
(With 1 point for Innovation and Design and excluding Regional Priority)
The Impact of Convia Controls at the USGBC Headquarters
80%
32%
71%
49%
OpenOffices
PrivateOffices
ConferenceRooms
Reception& Lobby
Cafe& Kitchenettes
Baseline
-10%
-20%
-30%
-40%
-50%
-60%
-70%
-80%
-90%
-100%
60%
Comparing energy use at the headquarters versus the 90.1 ASHRAE Baseline
Performing Betterthan Standard
Performing Nearor at Standard
Performing Worsethan Standard
Performance ReportingWith Convia’s Energy Track Reporting Tool,
companies can monitor and optimize their buildings’ energy performance instantly, for immediate and ongoing improvement.
The Energy Track “Map View” displays the floor plan of a given space, and highlights areas that are consuming more energy than predicted.
“History” gives facility managers the power to track past usage in simple-to-read graphs and tables. Convia facilitates ongoing optimization by allowing for unlimited changes based on a space’s measured performance. The US Department of Energy estimates that this ongoing optimization can help reduce energy consumption by an additional 20%.
CASE STUDY
One study done for a large computer equipment
manfacturerer showed that dedicated space was used by
their employees only 38% of the time. And that number
was even less for conference rooms. By developing a better
understanding of how the space was performing, this
company was able to increase utilization rates to 50% and
reduce the real estate cost per employee by 55%!
• • •• • • • • • • • • • • • • • • • • • • • • ••••••••••••••••••••••••
•••
••••••••• •• •• •• ••
+
Space Utilization ReportingReal estate is the second largest expense for most businesses. And as space occupancy
costs continue to increase, facility managers are seeking methods to lower these expenses through improved workplace productivity and overall real estate reductions.
The Convia Reporting Tool gives you the information you need about occupancy of a space and how that space is being utilized so you can minimize your real estate costs and improve workplace productivity, which makes Convia the perfect tool for reducing a facilities costs.
INCREASE PRODUCTIVITY
MINIMIZEREAL ESTATE COSTS
• •• •• •
• •• • •
• • • •• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • ••••••••••••••••••••••••••••••••••••••
••••••
••
••••••••••••••••• •• •• •• •
mobile ConferenceCalls
Tele-Commuting
econference
NEWTECHNOLOGIES
MEAN LESSDEDICATED OFFICE
ANDCONFERENCE ROOM
SPACE
Herman Miller Energy ManagerTM Workstations
Recognizing that workers spend approximately 50 percent of their time away from their desks, Herman Miller developed Energy Manager to bring energy management strategies to the individual workstation. Energy Manager—a proprietary electrical circuit control system—leverages the advanced load monitoring (the amount of energy drawn by devices on an electrical circuit) and control capabilities made possible through Convia. The system connects building power with the modular power of Herman Miller workstations—including Vivo interiors, My Studio Environments, Ethospace system, and Action Office system—enabling a truly integrated control solution for end-to-end power applications.
A Simple Way to Save Energy and Reduce Costs
Convia Controls may be purchased as part of the Herman Miller Energy Manager product line. The Herman Miller Energy Manager product allows energy consumption to be monitored, measured and controlled at a workstation level. Significant amounts of energy can be saved if task lighting and powered devices in workstations are controlled, so they are on only when needed and off when not occupied.
When used in conjunction with Convia Enabled Wiremold components, the result is an end-to-end power control platform that integrates a building’s lighting, plug-load and HVAC energy management strategies.
Herman Miller works for a
better world around you—with inventive designs, technologies and related services that improve the
human experience wherever people work, heal, learn,
and live.
TM
Convia Enabled means this product is
enhanced with the ultimate
energy saving capabilities.
Wiremold Energy Solutions
Convia Controls are sold as a technology ingredient in the modular electrical distribution components provided by the Legrand subsidiary Wiremold. Recognized for more than 100 years and considered the premier brand for electrical distribution products, Wiremold/Legrand offers an extensive range of wire and cable pathway solutions for commercial, institutional and residential buildings.
“Convia Enabled” Wiremold products include modular power and lighting distribution systems, floor boxes, poke-thru devices and architectural columns. Convia Enabled products result in integrated power distribution and control platform that can be endlessly modified to adapt to the needs of a space over time.
Wiremold Legrand, is an innovative manufacturer and the market leader in electrical
and network infrastructure solutions.
Together, we aim to broadenthe reach of energy management strategies
and fuel the adoption of more flexible, sustainable spaces.
©2009 Convia, Inc. 1370 Abbott Court, Buffalo Grove, IL 60089 www.convia.com Printed in U.S.A. on recycled paper.
® Herman Miller is among the registered trademarks of Herman Miller, Inc. ® Convia is a trademark of Convia,Inc.
® Wiremold/Legrand is a trademark of Wiremold/Legrand.
® USGBC, LEED and related logos are trademarks owned by the U.S. Green Building Council and is used by permission.
Buildings Magazine — 2009 Top 100 Product 100 Products/Services
2009 Frost & Sullivan Best Practices Award —
North American Building Automation Systems Industry Innovation and Advancement of the Year Award
Consulting Specifying Engineer — 2009 Product of the Year Finalist
2007 Editor’s Choice: Buildings Magazine — Top Product Pick
35th Annual Product Report: Architectural Record Magazine — Winner
Best of NeoCon 2007 for Workplace Technologies — Gold Winner
2007 Buildings Innovation Award in Workplace Flexibility: Buildings Magazine — Grand Prize Winner
The Chicago Athenaeum: Museum of Architecture and Design — Good Design Award
Today’s Facility Manager Magazine — Product of the Month
®