copyright · • hotel, motel or apartment lobbies. • stores where telephones are used by patrons...

Copyr igh t

i

DECLARATION OF CONFORMITYaccording to FCC Part 15

Other product names are trademarks orregistered trademarks of their respectivecompanies.

© Copyright 2006 Fujitsu Limited. All rightsreserved. No part of this publication may becopied, reproduced or translated, without theprior written consent of Fujitsu Limited. No partof this publication may be stored or transmittedin any electronic form without the written consentof Fujitsu Limited.

Operations are subject to the following twoconditions:

(1) This device may not be allowed to causeharmful interference.

(2) This device must accept any interferencereceived, including interference that maycause undesired operation.

Website: www.pc-ap.fujitsu.com

CopyrightFujitsu Limited has made every effort to ensurethe accuracy and completeness of this document.However, as ongoing development efforts arecontinually improving the capabilities of ourproducts, we cannot guarantee the accuracy ofthe contents of this document. We disclaimliability for errors, omissions or future changes.

LifeBook is a trademark of Fujitsu Limited.

Microsoft, Windows, MS, MS-DOS and WindowsNT are registered trademarks of the MicrosoftCorporation of the United States in the UnitedStates and other countries.

Phoenix is a registered trademark of PhoenixTechnologies Corporation of the United States.

ExpressCard™. Compliance ID: EC100079. TheExpressCard™ word mark and logo are ownedby the Personal Computer Memory CardInternational Association (PCMCIA) and any useof such marks by Fujitsu is under license.

Copyright© 1981-1999 Microsoft Corporation, Allrights reserved.

Copyright© 1999 Phoenix Technologies, Ltd., Allrights reserved.

LB_Emu E8210 (Intro) 20/3/06, 2:08 pm1

ii

9. If an extension cord is used with this product,make sure that the total ampere rating of theequipment plugged into the extension corddoes not exceed the extension cord ampererating. Also, make sure that the total ratingof all products plugged into the wall outletdoes not exceed 15 amperes.

10. Never push objects of any kind into thisproduct through cabinet slots as they maytouch dangerous voltage points that couldresult in a fire or electric shock. Never spillliquid of any kind on the product.

11. Do not attempt to service this productyourself, as opening or removing covers mayexpose you to dangerous voltage points orother risks. Refer all servicing to qualifiedservice personnel.

12. Unplug this product from the wall outlet andrefer servicing to qualified service personnelunder the following conditions:

a. When the power cord or plug is damagedor frayed.

b. If liquid has been spilled into the product.

c. If the product has been exposed to rain orwater.

d. If the product does not operate normallywhen the operating instructions are followed.Adjust only those controls that are coveredby the operating instructions since improperadjustment of other controls may result indamage and will often require extensivework by a qualified technician to restore theproduct to normal condition.

e. If the product has been dropped or thecabinet has been damaged.

f. If the product exhibits a distinct change inperformance, indicating a need for service.

IMPORTANT SAFETYINSTRUCTIONS1. Read these instructions carefully. Save these

instructions for future reference.

2. Follow all warnings and instructions markedon the product.

3. Unplug this product from the wall outletbefore cleaning. Do not use liquid cleanersor aerosol cleaners. Use a damp cloth forcleaning.

4. Do not use this product near water.

5. Do not place this product on an unstable cart,stand or table. The product may fall, causingserious damage to the product.

6. Slots and openings in the cabinet and theback or bottom are provided for ventilation;to ensure reliable operation of the productand to protect it from overheating, theseopenings must not be blocked or covered.The openings should never be blocked byplacing the product on a bed, sofa, rug orother similar surface. This product shouldnever be placed near or over a radiator orheat register or in a built-in installation unlessproper ventilation is provided.

7. This product should be operated from thetype of power indicated on the marking label.If you are not sure of the type of poweravailable, consult your dealer or local powercompany.

8. Do not allow anything to rest on the powercord. Do not locate this product wherepersons will walk on the cord.

LB_Emu E8210 (Intro) 24/3/06, 12:01 pm2

iii

13. CAUTION: When replacing the battery, besure to install it with the polarities in thecorrect position. There is a danger ofexplosion if the battery is replaced withan incorrect type or is mistreated. Do notrecharge, disassemble or dispose of infire. Replace only with the same orequivalent type recommeded by themanufacturer. Dispose of the used batteryaccording to the manufacturer’sinstructions.

14. Use only the proper type of power supplycord set (provided in your accessories box)for this unit. It should be a detachable type:UL listed/CSA certified, BS1363, ASTA,SS145 certified, rated 10A 250V minimum,VDE approved or its equivalent. Maximumlength is 15 feet (4.6 meters).

LB_Emu E8210 (Intro) 24/3/06, 12:01 pm3

iv

Changes or modification not expresslyapproved by Fujitsu could void this user’sauthority to operate the equipment.

FCC NOTICESNotice to Users of Radios and Television

These limits are designed to provide reasonableprotection against harmful interference in aresidential installation. This equipment generates,uses, and can radiate radio frequency energyand, if not installed and used in accordance withthe instructions, may cause harmful interferenceto radio communications. However, there is noguarantee that interference will not occur in aparticular installation. If this equipment doescause harmful interference to radio or televisionreception, which can be determined by turningthe equipment off and on, the user is encouragedto try to correct the interference by one or moreof the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between theequipment and receiver.

• Connect the equipment into an outlet that ison a different circuit than the receiver.

• Consult the dealer or an experienced radio/TV technician for help.

Shielded interconnect cables must be employedwith this equipment to ensure compliance withthe pertinent RF emission limits governing thisdevice.

Notice to Users of the US Telephone Network

Your LifeBook notebook may be supplied withan internal modem which complies with Part 68of the FCC rules. On this notebook is a label thatcontains the FCC Registration Number and theRinger Equivalence Number (REN) for thisequipment among other information. If requested,

the user must provide their telephone companywith the following information:

1. The telephone number to which thenotebook is connected.

2. The Ringer Equivalence Number (REN) forthis equipment.

3. That the equipment requires a standardmodular jack type USOC RJ-11C which isFCC Part 68 compliant.

4. The FCC Registration Number.

This equipment is designed to be connected tothe telephone network or premises wiring usinga standard modular jack type USOC RJ-11Cwhich is FCC Part 68 compliant and a line cordbetween the modem and the telephone networkwith a minimum of 26AWG.

The REN is used to determine the number ofdevices that you may connect to your telephoneline and still have all of those devices ring whenyour number is called. Too many devices on oneline may result in failure to ring in response to anincoming call. In most, but not all, areas the sumof the RENs of all of the devices should notexceed five (5). To be certain of the number ofdevices you may connect to your line, asdetermined by the RENs, contact your localtelephone company.

If this equipment causes harm to the telephonenetwork, your telephone company maydiscontinue your service temporarily. If possible,they will notify you in advance. If advance noticeis not practical they will notify you as soon aspossible. You will also be advised of your right tofile a complaint with the FCC.

This fax modem also complies with fax brandingrequirements per FCC Part 68.

Your telephone company will probably ask youto disconnect this equipment from the telephonenetwork until the problem is corrected and youare sure that the equipment is not malfunctioning.

LB_Emu E8210 (Intro) 15/3/06, 10:35 am4

v

This equipment may not be used on coin-operated telephones provided by your telephonecompany. Connection to party lines is subject tostate tariffs. Contact your state’s public utilitycommission, public service commission orcorporation commission for more information.

This equipment includes automatic dialingcapability. When programming and/or making testcalls to emergency numbers:

• Remain on the line and briefly explain to thedispatcher the reason for the call.

• Perform such activities in off-peak hours, suchas early morning or late evening.

FCC rules prohibit the use of non-hearing aidcompatible telephones in the following locationsor applications:

• All public or semipublic coin-operated or creditcard telephones.

• Elevators, highways, tunnels (automobile,subway, railroad or pedestrian) where a personwith impaired hearing might be isolated in anemergency.

• Places where telephones are specificallyinstalled to alert emergency authorities suchas fire, police or medical assistance personnel.

• Hospital rooms, residential health carefacilities, convalescent homes and prisons.

• Workstations for the hearing impaired.

• Hotel, motel or apartment lobbies.

• Stores where telephones are used by patronsto order merchandise.

• Public transportation terminals wheretelephones are used to call taxis or to reservelodging or rental cars.

• In hotel and motel rooms as at least ten percentof the rooms must contain hearing aidcompatible telephones or jacks for plug-inhearing aid compatible telephones which willbe provided to hearing impaired customers onrequest.

DOC (INDUSTRY CANADA)NOTICESNotice to Users of Radios and Television

This Class B digital apparatus meets allrequirements of the Canadian Interference-Causing Equipment Regulations.

Notice to Users of the Canadian TelephoneNetwork

The Canadian Industry Canada label identifiescertified equipment. This certification means thatthe equipment meets certain telecommunicationsnetwork protective, operational, and safetyrequirements. The Depar tment does notguarantee the equipment will operate to theuser’s satisfaction.

LifeBook notebooks are supplied with an internalmodem which complies with the Industry Canadacertification standards for telecommunicationnetwork protection and safety requirements.Before connecting this equipment to a telephoneline the user should ensure that it is permissibleto connect this equipment to the localtelecommunication facilities. The user should beaware that compliance with the certificationstandards does not prevent service degradationin some situations.

Repairs to telecommunication equipment shouldbe made by a Canadian authorized maintenancefacility. Any repairs or alterations not expresslyapproved by Fujitsu or any equipment failuresmay give the telecommunication company causeto request the user to disconnect the equipmentfrom the telephone line.

The connecting arrangement code for thisequipment is CA11A.

LB_Emu E8210 (Intro) 15/3/06, 10:35 am5

vi

+

The Load Number assigned to each telephoneterminal device denotes the percentage of thetotal load to be connected to a telephone loop orcircuit which is used by the device to preventoverloading. The termination on a loop mayconsist of any combination of devices such thatthe total of the load numbers of all devices doesnot exceed 100.

For safety, users should ensure that theelectrical ground of the power utility, thetelephone lines and the metallic waterpipes are connected together. Usersshould NOT attempt to make suchconnections themselves but shouldcontact the appropriate electric inspectionauthority or electrician. This may beparticularly important in rural areas.

UL Notice

This unit requires an AC adapter to operate. Useonly UL Listed Class 2 adapter, output rating19VDC, 4.22A. Refer to the illustration below forthe correct AC Adapter output polarity:

To reduce the risk of fire, use only #26AWG or larger telecommunications linecord.

For Authorized Repair Technicians Only

For continued protection against risk offire, replace only with the same type andrating fuse.

Danger of explosion if Lithium (CMOS)battery is incorrectly replaced. Replaceonly with the same or equivalent typerecommended by the manufacturer.Dispose of used batteries according tothe manufac-turer’s instruction.

Proper Disposal of Battery

Under federal, state or local law, it may be illegalto dispose of batteries by putting them in therubbish bin or trash cans. Please take care ofour environment and dispose of batteriesproperly. Check with your local governmentauthority for details regarding recycling ordisposing of unwanted batteries.

LB_Emu E8210 (Intro) 15/3/06, 10:35 am6

Copyr igh t

vii

DATA STORAGE MEDIA ANDCUSTOMER RESPONSIBILITIESThe only effective protection for the data storedin a computer, such as on a hard disk, is for youthe purchaser to regularly back up the data.Fujitsu and its affiliates, suppliers, serviceproviders and resellers shall not be responsiblefor any software programs, data or otherinformation stored or used on any media or partof any product returned to Fujitsu or its serviceproviders for Warranty Service or other repair,including but not limited to the costs of recoveringsuch programs, data or other information. It issolely your responsibility as the Purchaser toback up any software programs, data orinformation stored on any storage media or anypart of a Product returned for Warranty Serviceor repair to the designated service centers.

HIGH SAFETY REQUIRED USEThis Product is designed, developed andmanufactured as contemplated for general use,including without limitation, general office use,personal use, household use and ordinaryindustrial use, but is not designed, developed andmanufactured as contemplated for useaccompanying fatal risks or dangers that, unlessextremely high safety is secured, could leaddirectly to death, personal injury, severe physicaldamage or other loss (hereinafter ‘High SafetyRequired Use’), including without limitation,nuclear power reaction core control in nuclearatomic facility, airplane automatic aircraft flightcontrol, air traffic control, operation control inmass transpor t control system, medicalinstrument for life support system, missilelaunching control in weapon system. You shallnot use this Product without securing thesufficient safety required for the High SafetyRequired Use.

LB_Emu E8210 (Intro) 15/3/06, 10:35 am7

viii

AUSTRALIAN WARNINGSWARNINGFOR SAFETY REASONS, ONLY CONNECTEQUIPMENT WITH A TELECOMMUNICA-TIONS COMPLIANCE LABEL. THIS INCLUDESCUSTOMER EQUIPMENT PREVIOUSLY LA-BELLED PERMITTED OR CERTIFIED.

Connection of Non Certified/Approvedperipherals may result in the equipmentoperating outside the Australian EMIStandards.

Modems connected to the Australiantelecommunications network must be operatedin accordance with the Labelling Notice. Thismodem has been specifically configured toensure compliance with the ACA Standards. Donot adjust your modem or software outside thevalues indicated below. To do so would result inyour modem being operated in a non-compliantmanner.

Call Attempts/Retries:

Applications software shall be configured so thatno more than 3 attempts are made to establish aconnection to a given number (Note: if the modemcan detect service tones, up to 10 attempts canbe made). If the call sequence is unsuccessful,there shall be a delay of at least 30 minutesbefore attempting to call the number again.

Failure to set the modem and any applicationsoftware used with the modem, to the valuesshown above will result in the modem beingoperated in a non-compliant manner.Consequently, this would be in violation of theLabelling Notice for this equipment and theTelecommunications Act 1997 prescribespenalties for the connection of non-compliantequipment.

LB_Emu E8210 (Intro) 15/3/06, 10:35 am8

Copyr igh t

ix

NEW ZEALAND WARNINGSThe grant of a Telepermit for any item of terminalequipment indicates only that Telecom hasaccepted that the item complies with minimumconditions for connection to its network. Itindicates no endorsement of the product byTelecom, nor does it provide any sort of warranty.Above all, it provides no assurance that any itemwill work correctly in all respects with anotheritem of Telepermitted equipment of a differentmake or model, nor does it imply that any productis compatible with all of Telecom’s networkservices.

This equipment is not capable under all operatingconditions of correct operation at the higherspeeds for which it is designed. 56 KBPSconnections are likely to be restricted to lowerbit rates when connected to some PSTNimplementations. Telecom will accept noresponsibility should difficulties arise in suchcircumstances.

Immediately disconnect this equipment should itbecome physically damaged, and arrange for itsdisposal or repair.

This equipment shall not be used in any manner,which could constitute a nuisance to otherTelecom customers.

This equipment shall not be set to makeautomatic calls to the Telecom “111” EmergencyService.

This device is equipped with pulse dialing whilethe New Zealand standard is DTMF tone dialing.There is no guarantee that Telecom lines willalways continue to support pulse dialing. It isstrongly recommended that pulse dialing is notused.

Some parameters required for compliance withTelecom ’s Telepermit requirements aredependent on the equipment (PC) associatedwith this device. The associated equipment shallbe set to operate within the following limits forcompliance with Telecom’s Specifications:

For repeat calls to the same number.

There shall be no more than 10 call attemptsto the same number within any 30 minuteperiod for any single manual call initiation andthe equipment shall go on-hook for a period ofnot less than 30 seconds between the end ofone attempt and the beginning of the nextattempt.

For Automatic calls to different numbers.

The equipment shall go on-hook for a periodof not less than 5 seconds between the end ofone attempt and the beginning of the nextattempt.

For Automatically answered IncomingCalls.

Incoming calls shall be answered between 3and 30 seconds from the start of the ringing.

For correct operation, the total of the RNs of alldevices connected to a single line at anytimeshould not exceed 5. The RN of this Equipmentis 0.5.

WARNING:CONNECTION OF NON CERTIFIED/APPROVED PERIPHERALS MAY RESULT INTHE EQUIPMENT OPERATING OUTSIDE THENEW ZEALAND EMI STANDARDS.

LB_Emu E8210 (Intro) 15/3/06, 10:35 am9

x

NOTE:

The screens and illustrations shown in thisexamples may slightly vary depending on theoperating environment that you have installed.

NOTE: Modem setting in WindowsXP

A. If you are located in Australia

1. Click Start select Control panel select"Phone and Modem Options".

2. Double click New Location.

3. Choose "Australia" in Country/region pulldown menu bar.

4. Select Phone system as "Tone Dialing".

5. Click OK and Apply.

B. If you are located in New Zealand

1. Click start select Control panel select"Phone and Modem Options".

2. Double click New Location.

3. Choose "New Zealand" in Country/regionpull down menu bar.

4. Select Phone system as "Tone Dialing".

5. Click OK and Apply.

LB_Emu E8210 (Intro) 15/3/06, 10:35 am10

xi

Table of Contents

CHANGING THE INTERNALBATTERY PACK ........................... 16

ADDING MEMORY MODULE ........... 17Where to install memory module ................. 17Preparing necessary items .......................... 17Installing memory module ............................ 17Checking the memory capacity .................... 19Changing memory module ........................... 19

USING FINGERPRINTAUTHENTICATION ....................... 21

Characteristics of fingerprintauthentication ......................................... 21

Configuration of registration information ...... 22Register log-in information

on homepages ........................................ 22Log into homepages using fingerprint

authentication ......................................... 25Change registration information ................... 26Save/ Read registration information ............. 29Setup window ............................................... 32

TROUBLESHOOTING ....................... 35Identifying the Problem ................................ 35Specific Problems ........................................ 35Troubleshooting Table .................................. 36

NOTE:A copy of LifeBook User's Manual is located onyour Microsoft Windows Desktop and SoftwareDrivers CD. You can use this LifeBook User'sManual to find out more information about thefunctions and features of your notebook.

Table o f Conten ts

NAMES OF THE PARTSAND THEIR FUNCTIONS ............. 1

Front features of the notebook ..................... 1Exterior features: Side view .......................... 3Exterior features: Top and Bottom view

of the notebook ....................................... 5Exterior features: Rear view of notebook ..... 6Port Replicator ............................................. 7

STATUS INDICATOR LCD ................ 9Power Indicator ............................................ 9AC Adapter Indicator .................................... 9Battery Charging Indicator ........................... 9Battery Level Indicators ................................ 9Wireless LAN Access ................................... 9Optical Drive Access Indicator ..................... 9Disk Drive Access Indicator ......................... 9Card Slot Access Indicator ........................... 10Num Lock Indicator ...................................... 10Caps Lock Key ............................................. 10Scroll Lock Indicator ..................................... 10Security Indicator ......................................... 10

RUNNING THE NOTEBOOKON ITS BATTERY ......................... 11

Recharging the battery ................................. 11Running the notebook on its battery ............ 12Checking the power level of the battery ....... 12Low battery condition ................................... 13

POWER SOURCES ........................... 14Connecting the Power Adapter .................... 14Power On ..................................................... 15Power Off ..................................................... 15

LB_Emu E8210 (TOC) 15/3/06, 10:35 am11

Get t ing to Know Your L i feBook

1

NAMES OF THE PARTSAND THEIR FUNCTIONSFront features of thenotebook

1. Internal Microphone

It allows you to record the sounds and voicesin monaural.

2. LCD Panel

The display screen of the notebook.

(This picture is for illustration purpose only and may look different from the actual unit)

The phenomena described below arecharacteristics of LCD panels and do notindicate that LCD panels are defective.• The TFT color LCD screen of your

notebook, composes of more than2,350,000 picture elements (1680 x1050 pixels (WSXGA + TFT) or 1280x 800 pixels (SuperFine WXGA TFT).It was manufactured using advancedtechnologies. For technical reasons,LCD screen may have pixels that donot light and pixels that are always lit.

• LCD panels may display slight varyingcolors and uneven density.

9

8

10

4

3

5

2

1

7

15

1312

6

14

11

16

LB_Emu E8210 P01-13 20/3/06, 9:03 am1

2

3. LifeBook Security/Application PanelThe LifeBook Security/Application Panelprovides hardware security and one-touchapplication launch capability.

4. Power and Suspend/Resume ButtonThis button allows you to power on or off thenotebook. You can use also this button tosuspend notebook activity without turning offthe power to it and to resume the notebookfrom suspend mode.

5. KeyboardA 84-key keyboard with dedicated Windowskey, Page Up (PgUp) key and Page Down(PgDn) key.

6. Touch PadIt allows you to control the display cursor(mouse pointer).

7. SpeakersThe built-in dual speakers provide stereosound.

8. Status Indicator LCDThis indicator displays operating statussymbols that correspond to specificcomponents of your notebook.

Some applications may not allow you toscroll up and down a document using thescroll button.

9. Quick Point*It offers an additional method to move thedisplay cursor (mouse pointer).

* For model with Quick Point.

10. Wireless LAN/ Bluetooth* ON/OFF SwitchThe switch allows you to turn on and off theWireless LAN/ Bluetooth communications.Slide the switch to the right to turn it on, orslide the switch to the left to turn it off.Remember to off this switch where the useof electronic devices is restricted, forexample, in hospitals and on airplanes.Turn off this switch if you intend to carry yournotebook around. If you set your notebookin standby mode with this switch on, thenotebook may resume operationunexpectedly when it is carried around. Thismay damage the hard disk.

* For model with Bluetooth.

11. Infrared PortThe Infrared port allows you to communicatewith another Infrared compatible infrareddevice wirelessly.

12. IEEE 1394 PortThe IEEE 1394 allows you to connect aperipheral with IEEE 1394 port such as adigital video.

13. SD/MSPro Card SlotIt allows you to insert an optional memorycard.

14. Headphone Jack/Optical Digital AudioOutput Terminal• Headphone jackIt allows you to connect commerciallyavailable headphones with a Ø3.5 mini plug.This jack is not compatible with certain typesof connectors. Please consult a salespersonon the specification of the headphone beforepurchasing it.• Optical digital audio output terminal(SPDIF)It allows you to connect the notebook to anaudio unit using a fiber-optic cable e.g. anMD recorder with an optical digital inputterminal.

15. Microphone JackIt allows you to connect a commerciallyavailable monaural microphone with a Ø3.5mini plug.This jack does not support certain types ofmicrophones e.g. dynamic microphone.Please consult a salespeson on themicrophone specification before purchasingit.

16. Fingerprint Sensor or Scroll ButtonsYour notebook may be equipped with eitherFingerprint Sensor or Scroll Buttons.The Fingerprint Sensor provides analternative way for Windows logonauthentication and homepages logonauthentication. Please refer to the section on“Using Fingerprint Authentication” for moredetails.The Scroll Buttons allow you to scroll up anddown a document.

Some applications may not allow you toscroll up and down a document.

LB_Emu E8210 P01-13 15/3/06, 10:36 am2


3


1 2 3 4 5 6

The first time you play a DVD title with aregion code different from that of the DVDoptical drive - the region code set atfactory, you will be prompted to changethe region code of the DVD optical drive.The region code of a DVD optical drivecan be changed up to 4 times, after whichit will be locked so that the DVD opticaldrive can only play DVD titles of the finalregion code set.

Do not leave this bay empty. This maycause unexpected system error.

4. Bay Unit Release Lever

You can use this lever to release an installedmulti-purpose bay device.

5. USB 2.0 Ports

The USB 2.0 ports allow you to connectUniversal Serial Bus devices. USB 2.0devices transfer data at up to 480Mbps andis backward compatible with USB 1.1devices, which transfer data at up to 12Mbps.

6. Video Output (S-Video) TerminalIt sends S-Video signals to a connected TV.

Exterior features: Side view

� Right view of the notebook

1. Anti-theft Lock SlotIt allows you to attach an optional physicallock down device.

2. Modem (RJ-11) Port

It allows you to connect your notebookinternal modem to a phone line socket usinga supplied RJ-11 cable.

3. Multi-Purpose Bay

Your notebook comes with an internal opticaldisk drive, which may vary betweencountries. Please check with your localdistributor for actual configuration. You maychange the installed optical disk drive withother bay options. These are sold separately.

If this LifeBook come with an optical drivethat can read DVD titles, then this drive ispre-set at factory to read DVD title withregion codes for specific Asia Pacificmarkets (e.g. code 3 for Asian, code 4 forAustralia, code 6 for China.)

LB_Emu E8210 P01-13 15/3/06, 2:28 pm3

4


1

8

2 3 4

6 97

5

8. Smart Card SlotIt allows you to install a Smart Card.

9. PC Card Eject ButtonYou press this button to eject the PC cardfrom the slot.

Do not leave this bay vacant. This maycause unexpected system failure.

� Left view of the notebook

1. DC-IN JackYou can plug in the supplied AC adapter intothis port to power your notebook and chargethe battery.

2. Parallel PortThe parallel port allows you to connectparalle devices.

3. Air InletThis opening allows air to circulate inside thenotebook and cool it.

4. ExpressCard™ SlotIt allows you to connect to an ExpressCard™module. There are two sizes ofExpressCard™ module. One is 34mm wide(ExpressCard™/ 34) and the other is 54mmwide (ExpressCard™/54).This LifeBook can support both sizes ofExpressCard™ module.

NOTE:The ExpressCard™ slot in this notebookpassed the compliance test setup by thePCMCIA working group. The ExpressCard™Compliance ID is EC100079.

5. ExpressCard™ Slot Eject ButtonYou press this button to eject theExpressCard™ from the slot.

6. External VGA PortThe external VGA port allows you to connectan external display or CRT monitor.

7. PC Card (Type II) SlotIt allows you to install one Type I/II PC card.

LB_Emu E8210 P01-13 15/3/06, 10:36 am4


5

Exterior features: Top andBottom view of the notebook

1. Wireless LAN Connection ON/OFF Switch

You can use this switch to turn on or off thewireless LAN connection.

1. Expansion RAM Module Slot

The location of the expansion memory slot.

2. Battery Release Latch

Slide and hold this latch before sliding theBattery Bay Lock Latch to unlock the battery.

3. Port Replicator Connector

This connector allows you to connect theoptional port replicator to your notebook.

1 2

1

2

3


2. Built-in Wireless LAN

The location of the dual Wireless LANantenna.

4

5

4. Battery Bay Lock Latch

This latch secures the battery pack in thebattery bay.

5. Internal Battery Pack Bay

The location of the internal battery pack.

LB_Emu E8210 P01-13 15/3/06, 10:36 am5

6


Exterior features: Rear view ofthe notebook

1. USB 2.0 Ports

The USB 2.0 ports allow you to connectUniversal Serial Bus devices. USB 2.0devices transfer data at up to 480Mbps andis backward compatible with USB 1.1devices, which transfer data at up to 12Mbps.

2. Serial PortThe serial port allows you to connect serialdevices.

3. Anti-theft Lock Slot

It allows you to attach an optional physicallock down device.

4. Gigabit LAN (RJ-45) Port

This port allows you to connect to a LAN(local area network) using an optional LANcable.

1 2 3 4

LB_Emu E8210 P01-13 15/3/06, 2:24 pm6


7

To lock only the port replicator withoutlocking the docked notebook, please useanti-theft lock slot 2 with an optionalphysical lock down device.

5. USB 2.0 PortsThe USB 2.0 ports allow you to connectUniversal Serial Bus devices. USB 2.0devices transfer data at up to 480Mbps andis backward compatible with USB 1.1devices, which transfer data at up to 12Mbps.

6. PS/2 Keyboard/Mouse Port.The PS/2 port allows you to connect anexternal PS/2 keyboard or mouse.

7. Parallel PortThe parallel port allows you to connectparalle devices.

8. Serial PortThe serial port allows you to connect serialdevices.

9. Digital Video Interface (DVI-D)The DVI-D port allows you to connect a flat-panel LCD display or television that isequipped with a DVI-D port for ultra-crispdigital images and graphics.

10. External VGA PortThe external VGA port allows you to connectan external display or CRT monitor.


1

4

2

6 8 10 1197

13

3

125

PORT REPLICATOR

The port replicator is an optional item. It may bebundled in certain country configurations. Pleasecheck the country configurations with your localdistributor.

� Port replicator back panel

The following is a brief description of the portreplicator back panel components.

1. Power and Suspend/Resume ButtonThis button allows you to power on or off thenotebook. You can also use this button tosuspend notebook activity without turning offthe power to it and to resume the notebookfrom suspend mode.

2. DC Power JackThe DC power jack allows you to plug in theAC Adaptor to power on your notebook.

3. Microphone JackIt allows you to connect an external monomicrophone.

4. Anti-theft Lock Slot 1It allows you to locked the notebook and theport replicator.

LB_Emu E8210 P01-13 24/3/06, 10:59 am7

8

11. Lan (RJ-45) JackThe LAN port allows you to connect a LAN(RJ-45).Note that when your notebook is docked onthe port replicator, the LAN port on theLifeBook is not accessibale. The por treplicator LAN port should be used toconnect to network resources when theLifeBook is docked on the port replicator.

12. Anti-theft Lock Slot 2It allows you to lock only the port replicator.

13. Headphone JackThe headphone jack allows you to connecta headphone or external speakers.

Certain peripheral devices connected tothe port replicator may operate in anunstable manner if the port replicator isinstalled/removed when the LifeBookpower is on. If this happens, switch offthe LifeBook power prior to installing/removing the port replicator.

� Port replicator front panel

The following is a brief description of the portreplicator front panel components.

1. Port Replicator InterfaceThis interface connects the port replicator toyour notebook.

2. Guide Bar Release LatchSlide latch to release guide bar.

3. Guide BarThe guide bar allows you to use the portreplicator with another LifeBook model.

4. Release LeverYou can pull out the port replicator lever toremove your notebook from the por treplicator.

1 2 3 4

LB_Emu E8210 P01-13 24/3/06, 10:59 am8


9

5. Wireless LAN Access ( )This indicator shows wireless LAN in activemode.

6. Optical Drive AccessIndicator ( )This indicator turns on when an optical drivedevice is being accessed.

7. Disk Drive AccessIndicator ( )This indicator turns on when an internalhard disk drive or a removable disk drive isbeing accessed.

Do not power off the notebook when thedisk drive access indicator is shown.Failture to do so corrupt data on the diskas well as the installed operating system.

5 6 7 81 2 3 4 10 11 129

STATUS INDICATOR LCD

1. Power Indicator ( )This indicator turns on when there is powerto the notebook.It turns off when the notebook is poweredoff. This indicator will blink if the notebookis put in suspend mode.

2. AC Adapter Indicator ( )This indicator states the power source ofyour notebook i.e. from an external ACadapter or an internal battery. The indicatorturns on when the power source is from anexternal AC adapter. It turns off when powersource is from internal battery.

3. Battery ChargingIndicator ( )This indicator turns on when internal batteryis being charged.

4. Battery Level Indicators(1, 2, )The two Battery Level Indicators state thepresence of stardard Li-ion battery andoptional modular bay Li-ion battery. Battery1 refers to the standard battery and Battery2 refers to the optional modular bay battery.In addition, these two indicators show theremaining power of the batteries.

LB_Emu E8210 P01-13 20/3/06, 9:18 am9

10

8. Card Slot AccessIndicator ( )This indicator turns on if an application triesto access a Card slot regardless whether aCard is intalled in the slot.

9. Num Lock Indicator ( 1 )This indicator lights up when the keyboardis locked in Num Lock mode. (You can usethe keyboard as a ten-digit keyboard whenthe Num Lock mode is turned on).You can toggle the Num Lock mode by usingthe [ ] key.

10.Caps Lock Key ( A )You can toggle the Caps Lock mode byusing the [ ] key.

11.Scroll Lock Indicator ( )This indicator turns on when the lock modeis turned on.You can toggle the Scroll Lock button byusing the [ ] key while holding down

the [ ] key.

12.Security Indicator ( )This indicator may blink when the notebookpowers on or resumes from suspend mode.This means a password has been set forthe notebook using the Security Panel.You must enter the correct password beforethe notebook will resume operation.

LB_Emu E8210 P01-13 15/3/06, 10:36 am10


11

When the battery is 90% or morecharged, it cannot be recharged even ifthe AC adapter is connected. The batterycan be recharged when its power level(i.e. remaining battery life) is 89% or less.When a notebook is turned off, allindicators on the status LCD goes offimmediately if the battery is completelycharged.The chargeability of the battery degradeswhen it is used in an extremely hot or coldplace.When the battery is very hot, for example,immediately after long usage of thenotebook, the battery protection featuremay be activated to prevent the batteryfrom being recharged. When thetemperature decreases, the notebookautomatically begins to charge thebattery.When an optional modular bay battery isinstalled, it is charged along with theinternal standard battery.

RUNNING THE NOTEBOOKON ITS BATTERYRecharging the battery

1. Connect the AC adapter to your notebook.

The moment you connect an AC adapter toyour notebook, the notebook begins tocharge the internal standard battery pack.The charging status ( ) on the StatusIndicator LCD turns on.

2. When the indicator turns off after thebattery is completely charged, disconnectthe AC adapter from the notebbok.

Before using the supplied battery pack forthe very first time after purchase,remember to charge it fully. If a chargedbattery has not been recharged for morethan a month, charge it fully before usingit.When the battery is fully charged, thecharging status indicator turns off and theindicator stops blinking ( ) andlights up ( ).

LB_Emu E8210 P01-13 15/3/06, 10:36 am11

12

Running the notebook on itsbattery

This section describes the steps to run thenotebook on its internal standard battery.

1. Disconnect the AC adapter from yournotebook and press the power button.

The power level of the battery decreasesfaster when it is used in a cold place.

The chargeability of the battery decreasesafter it has been used over a long periodof time. If the battery runs down very fast,replace it with a new battery.

When an optional modular bay battery isinstalled, it is charged along with theinternal standard battery.

Checking the power level ofthe battery

When the notebook is turned on or when thebattery is being charged, the Battery Levelindicators turns on and blinks to show the powerlevel of the battery.

� Different power level of thebattery

Due to certain characteristics of Li-ionbattery, the Battery Level Indicators maynot correctly show the remaining powerof the battery, especially under extremetemperature conditions.When the battery is 90% or morecharged, it cannot be recharged even ifthe AC adapter is connected to thenotebook. The battery can be rechargedwhen its 89% or less.

The battery is between 76% and 100%charged.



The battery is between 13% and 25%charged or between 0% and 25%during charging.

Low Power LevelThe battery is below 12% charged.

Dead BatteryThe battery is 0% charged.

Power button

(This picture is for illustration purpose only and maylook different from the actual unit)

LB_Emu E8210 P01-13 15/3/06, 10:36 am12


13

The use of a weak battery may result inlost of data you are currently working on.When the battery runs low, connect theAC adapter to your notebook as soon asan external power source is available onimmediately save the data you areworking on, exit all applications and turnoff the notebook.Accessing data on the hard diskconsumes a lot of power. Therefore whenthe battery is weak, connect an ACadapter to the notebook before accessingdata on the hard disk.If a battery is weak and there is no systemactivity, the notebook may go into standby(i.e. suspend) mode. However, if there issystem activity, the notebook will go intostandby mode only after the systemactivity has completed its processing.The notebook will go into standby modewhen the indicator reaches 3%. This isthe default setting of the notebook.

� Battery Failure Alert

Indicates that the battery cannot be

charged properly.

If is indicated, turn off the notebook,remove the battery and reinstall itproperly.

Low battery condition

When the battery is discharged to a very lowlevel, the battery level indicator on the statusindicator LCD blinks ( ). If it blinks, connectthe AC adapter to your notebook immediately torecharge the battery.

LB_Emu E8210 P01-13 15/3/06, 10:36 am13

14

DC Power Jack

AC Adapter

AC Cable

DC Output Cable

The Li-ion battery is not charged at the pointof purchase. Remember to connect an ACadapter to your notebook to charge it whenyou use it for the first time.

POWER SOURCESConnecting the PowerAdapter

The AC adapter provides power for operatingyour notebook and charging the batteries.

Connecting the AC adapter

1. Plug the DC output cable into the DC powerjack on your notebook.

2. Plug the AC adapter into an AC electricaloutlet.

LB_Emu E8210 P14-15 15/3/06, 10:36 am14

Get t ing Star ted w i th your L i feBookNotebook

15

Power on

Power/Suspend/Resume button

You can use the Power/Suspend/Resume buttonto turn on your notebook. Once you haveconnected an AC adapter to the notebook orcharged the internal Lithium ion battery, you canpower on your notebook.

When you turn on your notebook, be sureyou have a power source connected to it. Thismeans that at least one battery is installedand charged or that the AC adapter isconnected and has power.

You can press the Power/Suspend/Resumebutton to turn off the notebook. After you havefinished working on the notebook, you can eitherleave it in Standby (i.e. suspend) mode or turn itoff.

Do not carry the notebook around when it isstill power on. Do not subject the notebookto shocks and vibrations. Failure to do so maydamage the notebook.

When you power on your notebook, it will performa Power On Self Test (POST) to check the internalparts and configuration for normal functionality.If an error is found, your notebook will emit anaudio warning and/or show an error message.After satisfactory completion of the Power On SelfTest (POST), your notebook will load youroperating system.

Power off

Before turning off the power, check that the HardDisk Access, Optical Disk Drive Access and PCCard Slot Access indicators are all. If you poweroff the notebook when it is acessing the disk orPC Card, data may be lost or corrupted. To poweroff the notebook, always shut down the notebookproperly using the Windows shutdown procedure.

Remember to close all files, exit allapplications and shut down the operatingsystem prior to turning off the power usingthe power button. If documents are openedwhen the notebook is turned off, data maybe lost and this may result in disk errors.

Remember to use the correct procedure to shutdown the notebook. The proper procedure is:

1. Click the Start button and then click ShutDown or turn Off notebook.

2. Select the Shut Down option from within theShut Down Windows dialog box.

3. Click OK to shut down your notebook.

LB_Emu E8210 P14-15 15/3/06, 10:36 am15

16

CHANGING THEINTERNAL BATTERYPACK

Before changing the internal battery pack,turn off the notebook and disconnect theAC adapter from it. To avoid shockhazards and damage to your notebook,be careful not to touch internalcomponents of the notebook, includingthe battery connector.

� Changing the internal batterypack

1. Turn off the notebook and disconnect theAC adapter from it.

2. Close the LCD panel and place yournotebook upside down.

Close the LCD panel gently. Do not exertexcessive pressure to it. Failure to do somay damage the LCD panel.

3. Remove the battery pack.

Slide and hold the battery release latchbefore sliding the Battery Bay Lock Latch tothe left to unlock the battery.Holding the Battery Bay Lock Latch to theleft, lift the Battery out of bay.

4. Install a new battery pack.

Insert a new battery into the bay and press itdown so that the latches click into place. Slidethe battery bay lock latch to secure thebattery pack.

After removing the internal battery pack,please take necessary precautions toprevent it from being shorted. Forexample, you can seal the connector endswith insulating tape. After removing thebattery pack, do not mix it with other typesof battery.The internal battery pack contains recyclematerial.

LB_Emu E8210 P16-20 15/3/06, 10:36 am16

User - Ins ta l lable Features

17

ADDING MEMORYMODULEWhere to install memorymodule

Your notebook has an expansion RAM moduleslot (slot 2) to add in one additional memorymodule.The memory capacity of the notebook can beincreased to a maximum of 4 GB (2048 MB x 2).

Preparing necessary items

• Philips screwdriverUse a screwdriver of appropiate size toremove the screws on the cover. Failure todo so may damage the head of the screws.

Memory Module Configuration Table.The table below shows combinations ofmemory that can be installed on yournotebook.

Total capacity Slot 1 Slot 2

256 MB 256 MB

384 MB 256 MB 128 MB

512 MB 256 MB 256 MB

768 MB 256 MB 512 MB

1 GB 512 MB 512 MB

2 GB 1024 MB 1024 MB

4 GB 2048 MB 2048 MB

* Subjected to availiability of 2048 MB memorymodules

This LifeBook is capable of operating in dualchannel memory mode. To realize the fullperformance benefits of dual channel operations,the two memory slots must be fitted with DDR2memory modules of the same capacity andspecification. We strongly recommend you to useFujitsu approved memory modules.

Installing memory module

To install memory, perform these steps.

Before installing any memory module,remember to power off the notebook anddisconnect the AC adapter from it.

Keep small objects, such as a cover, capsand screws, out of the reach of babiesand children. These small objects maysuffocate a baby or child if they areswallowed accidentally. Should such anaccident happen, consult a doctorimmediately.

Memorycompartmentcover

The installation of any combination of memoryother than the combinations shown below canimpair the functioning of your notebook.

LB_Emu E8210 P16-20 15/3/06, 10:36 am17

18

Certain components around the memoryslots are very hot when the notebook ispowerd on for a long period of time.To avoid possible burns, do not install orremove memory module immediatelyafter turning off the notebook but wait fora while until its internal components cooldown.

To install or remove a memory module,hold it by the edge and be careful not totouch any component and IC.Memory module is made of materialssensitive to human body static charges.Before handling a memory module,always touch an appropiate metal objectto discharge static charges from yourbody.Please remember to turn off the notebookbefore you begin to install or remove amemory module. If the notebook is placedin standby or hibernate mode while thememory is removed, data may be lost orcorrupted. This may also damage thememory module.


2. Close the LCD panel and place thenotebook upside down.

3. Remove the two screws securing thememory compartment slot cover andremove it.

Remove the battery compartment cover atthe bottom of the notebook.

4. Install the memory module

Insert the memory module into the slot withthe notch in the memory module aligned withthe projection on the connector, and pushthe memory module down unit it locks inplace with a click sound.

5. Attach the memory compartment coverand secure it with screws.

Attach the cover removed in step 3.

Notch in the memory module



LB_Emu E8210 P16-20 15/3/06, 10:36 am18

User - Ins ta l lable Features

19

The notebook specifications may varybetween countries, please check with yourlocal distributor for actual configuration.

5. Click OK.

If the numeric value displayed does notagree with the memory capacity of yournotebook, check the newly installedmemory module.

Changing memory module

The memory module installed on your notebookcan be replaced with a larger size of memory.


2. Close the LCD panel and place thenotebook upside down.

3. Remove the two screws securing thememory compartment cover and removeit.

Remove memory compartment cover at thebottom of the notebook.


Memory capacity

Checking the memorycapacity

If the memory is not installed correctly,an error message "Expansion memoryerror" may be displayed when you turnon the notebook. If such a messageappears, turn off the notebook, removethe memory module and reinstall it.

1. Turn on the notebook.

2. Click the Start button and select ControlPanel.

The Control Panel window appears.

3. Click Performance and Maintenance, andthen System.

The System Properties dialog box.

4. Check whether the circled numeric valuein the figure below has increased by thesize of the memory you have added.

In this example, 512 MB of memory isinstalled.

* The notebook uses 8MB of memory forinternal use, therefore a memory capacitysmaller than the actual installed memorycapacity is shown in this windows.

This example is only applicable to modelswith internal graphics module such as IntelExtreme Graphics 2.

LB_Emu E8210 P16-20 15/3/06, 10:36 am19

20

4. Remove the memory module.

Displace the hook on each side from thememory module. The memory modulecomes up slightly. Pull the memory modulediagonally up to detach it from the slot.

5. Install a new memory module.

Insert the memory module diagonally into theslot with the notch in the memory modulealigned with the projection on the connector.Push memory module down until it clicks intoplace.

6. Attach the memory compartment cover.

Attach the cover removed in step 3.

After you have installed or remove amemory module, check the memorycapacity of you notebook to verify that thememory module is installed properly.

Notch in the memory module


LB_Emu E8210 P16-20 15/3/06, 10:36 am20

Using F ingerpr in t Authent ica t ion

21

USING FINGERPRINTAUTHENTICATION*

With fingerprint authentication, you can omitentering a user name and a password by justsliding your finger onto the fingerprint sensor atthe time of logging in homepages or logging onWindows. This chapter describes how to usefingerprint authentication.

* NOTE:This is only applicable for LifeBook withFingerprint Sensor.

To use fingerprint authentication, the user’sfingerprints must be registered.

Characteristics of fingerprintauthentication

� Fingerprint authentication can beused in the following case.

• Logging on to Windows

When the user account of Windows ispassword-protected, only persons who knowthat password can log on to Windows usingthat account. However, you have to enter thepassword each time when you log on toWindows.With use of fingerprint authentication, youcan log on to Windows by only authenticatingfingerprints that have previously beenregistered, thus omitting entering apassword.

• Recovery from the power-saving status

If the computer is password-protected for therecovery from power-saving status, you haveto enter a password each time when yourcomputer is recovered from the power-savingstatus.With use of fingerprint authentication, youcan recover from the power-saving status byauthenticating fingerprints that havepreviously been registered, thus omittingentering a password.

• Canceling password-protected screensaver

You can lock your computer if the screensaver is password-protected. However, youhave to cancel this lock when canceling thescreen saver.With use of fingerprint authentication, justauthenticating fingerprints that havepreviously been registered enables this lockto be canceled, thus omitting entering apassword.

• Logging into the homepage that requiresan ID (user name) and a password

To log into the homepage of which securityis set up, you may have to enter log-ininformation such as an ID (user name) anda password.With fingerprint authentication, you can loginto these homepages by just authenticatingfingerprints if log-in information is previouslymemorized for specific homepages.Status for entering log-in information differsdepending on homepages; direct enteringlog-in information into homepages, andindication of screens specific to entering. Ineither case, log-in using fingerprintauthentication can be performed.

It is unnecessary to inputa password.

You can log onto Windows orrecover from thepower-savingstatus byauthenticatingthe fingerprintsthat have beenregistered.

LB_Emu E8210 P21-34 15/3/06, 10:36 am21

22

Configuration of registrationinformation

Registration information is set up in the followingconfiguration.To use fingerprint authentication, it is necessaryto register the user’s fingerprint.

� Registration information onfingerprint authentication (Username and password are just anexample.)

• User name

This is the user’s name for which a fingerprinthas been registered. It is necessary to givethe same name as used for logging on toWindows.

• Domain

The full name of the computer is displayed.

• Fingerprint

Fingerprints are registered.

• Password

The user’s password for a user whosefingerprint has been registered. It isnecessary to use the same password to beused in logging on to Windows.

• Log-in information on homepages

Register an ID (user name) and a passwordbeforehand, so that homepages that requireentering an ID (user name) and a passwordcan be viewed just by authenticatingfingerprints.

Register log-in informationon homepages

To log into homepages of which security is setup, you may have to enter log-in information suchas an ID (user name) and a password.With fingerprint authentication, you can log inthese homepages by only sliding your finger ontothe fingerprint sensor if log-in information ispreviously memorized for specific homepages.Register log-in information according to thefollowing procedure.

� Register log-in information onhomepages

1. Display a homepage you want log-ininformating to be registered.

2. Enter log-in information.

• When directly registering log-in informationto homepage.Do not press the “Sign-in” button, etc.

LB_Emu E8210 P21-34 15/3/06, 10:36 am22


23

• When directly registering log-in informationto homepage.Click the area where a user name and apassword are entered.

• When a screen specific for entering log-ininformation is indicated.Click on the input screen.

• When a screen specific for entering log-ininformation is indicated.Do not press the “OK” button.

3. Right-click on the OmniPass icon from the notification area in the rightcorner of the screen, and click on“Memorize password.”

The mouse pointer changes into .

4. With the mouse pointer changed to ,click on the area of log-in informationentered in Step 2.

The “OmniPass-Remenber Password”window will appear.

LB_Emu E8210 P21-34 15/3/06, 10:36 am23

24

5. Enter the name of log-in information fromthe “OmniPass-Friendly Name.

6. Click on “Finish.”

Registration of log-in information is completed.The homepage that has been set here can belogged in by just authenticating the registeredfingerprints without entering a user name and apassword.

� Managing log-in information onhomepages

Information to be logged in homepages withfingerprint authentication can be managed fromthe following screen.

1. Click on “Start,” “All programs,” “Softex”and “OmniPass control center” in thisorder.

The “OmniPass control center” window willappear.

2. Click on “Vault management.”

The “Vault access authentication” windowappears.

3. Slide any finger of which fingerprints havebeen registered onto the fingerprintsensor.

When authentication of fingerprints issuccessful, the “ID management” window willappear.

LB_Emu E8210 P21-34 15/3/06, 10:36 am24


25

4. Select the user name, and click on“Manage Passwords.”

The “Password management” window willappear.

5. Log-in information is displayed on the“Dialog protected by password.”

To change log-in information, it is necessaryto reregister log-in information. Select the log-in information name you desire to change,and click on “Delete page.” Then, after log-ininformation has been deleted, reregister thelog-in information to be registered.

Log into homepages usingfingerprint authentication

With fingerprint authentication, just by sliding yourfinger onto the fingerprint sensor, you can loginto the homepage where security is set.

� Register log-in information onhomepages

1. Display a homepage which log-ininformation such as an ID (user name) anda password are registered.

The “Access authentication” window willappear.

2. Slide any finger of which fingerprint hasbeen registered onto the fingerprintsensor.

When the authentication of fingerprints issucceeded, log-in to a homepage will beautomatically performed.

LB_Emu E8210 P21-34 15/3/06, 10:36 am25

26

Change registrationinformation

This chapter describes how to change theinformation registered for using fingerprintauthentication.

After the registration of fingerprintauthentication has been completed, donot change the user name that is requiredfor logging on to Windows and the username that has been set to the registrationinformation of fingerprint authentication.

• Registration information

Registration information includes a username, a password, a fingerprint, and log-ininformation on homepages. Whenregistration information is updated, delete allof registration information such as a username and a password before reregisteringit.However, when adding new fingerprints oradding/deleting log-in information forhomepages, it is unnecessary to delete theregistered information on fingerprintauthentication.

• User name

Do not change a user name.

• Password

When a password for logging on to Windowshas been changed, it is necessary that thepassword that has been set for registrationinformation for fingerprint authentication mustbe changed to the password same as forWindows after the change. When thepassword that has been set for theregistration information on fingerprintauthentication is changed, delete all ofregistration information on fingerprintauthentication before reregistering it.

• Fingerprint

The number of fingerprints to be registeredcan be added. To delete the fingerprintsalready registered, it is necessary to deleteall of registration information on fingerprintauthentication before reregistering it.

• Log-in information for homepages

When log-in information for homepages ischanged, before reregistering, it is necessaryto delete the log-in information that has beenregistered. In this case, it is unnecessary todelete registration information on fingerprintauthentication.

� Deletes registration informationon fingerprint authentication



2. Click on “Remove users from OmniPass.”

The “Log-in user authentication” window willappear.

LB_Emu E8210 P21-34 15/3/06, 10:36 am26


27

3. Slide any finger which fingerprint hasbeen registered onto the fingerprintsensor.

When authentication of fingerprints issucceeded, the “User delete confirmation”window will appear.

4. Click on “OK.”

The message “A user has normally beendeleted” will be displayed.

Registration information on fingerprintauthentication has been deleted.

� Adding registration informationto fingerprint authentication

1. Click on “Add new users to OmniPass.”

The “Confirmation of user name andpassword” window will appear.When “OmniPass control center” is notdisplayed, click on the “Start” button -> “AllPrograms” -> “Softex” -> “OmniPass controlcenter” in this order.

2. Enter the same password for logging onto Windows and click on “Next.”

The “Select finger” window will appear. Donot change a user name and domain.

LB_Emu E8210 P21-34 15/3/06, 10:36 am27

28

3. Select a finger which fingerprint isregistered, and click on “Next.”

The “Fingerprint verification” window willappear.

4 Slide a finger onto the fingerprint sensorto confirm that a fingerprint has beenlifted. When “Fingerprint confirmation” iscompleted, click on “OK.”

Perform “fingerprint verification” three times.After three times of “fingerprint verification”have been "successfull", slide your fingeragain onto the fingerprint sensor for“Fingerprint confirmation.”

5. When the message “Recommend toregister another finger” is displayed, clickon “Yes.”

The “Select finger” window will appear.

6. Perform Steps 3 to 5 again, and registerthe fingerprint of another finger.

When the “Setting up audio and task bar”window appears, proceed to Step 7.

7. Click on “OK” from the “Setting up audioand task bar” window.

The “OmniPass user account has beencreated” window appears.

8. Click on “Finish.”

9. When the message “Do you log on for anew user” is displayed, click on “Yes.”

The “OmniPass control center” windowappears again.


The “OmniPass control center” window willbe closed.

Re-registration of fingerprint authentication hasbeen completed.

LB_Emu E8210 P21-34 15/3/06, 10:36 am28


29

Save/Read registrationinformation

Information such as user names and passwords,fingerprints and log-in information for homepagesthat have once been registered can be savedaltogether. It is recommended that registrationinformation be saved in case where registrationinformation is mistakenly deleted.

� Save registration information.



2. Click on “Import/export of users.”

The “Import/export of users” window willappear.

3. Click on “Export of OmniPass userprofile.”

The “Authentication of user export” windowwill appear.

4. Authenticate the fingerprint registered.

When authentication of fingerprints issucceeded, “Save users that have beenexported by providing a name” window willappear.

LB_Emu E8210 P21-34 15/3/06, 10:36 am29

30



2. Click on “Import/export of users.”

The “Import/export of users” window willappear.

3. Click on “Import new users intoOmniPass.”

The “Open files to import users” window willappear

5. Enter the name of the registrationinformation to save, and click on “Save.”

The message “User expor t has beencompleted.” will be displayed.Save in the “My document” folder as anexample. Any names can be used for theregistration information to be saved.

6. Click on “OK” from the message “Userexport is completed.”

User’s export is completed, and registrationinformation is saved.

� Read registration information.

When no users are registered forfingerprint authentication, the “OmniPassregistration wizard” window may appearwhen star ting the computer. Whenimporting registration information, click on“Cancel.”

LB_Emu E8210 P21-34 15/3/06, 10:37 am30


31

4. Select the registration information thathas been saved and click on “Open.”

The “OmniPass import user” window willappear.

5. Enter a user name, a domain, and apassword, then click on “Next.”

The message “User import of OmniPass hasbeen completed” will be displayed.Enter the same user name and password tobe used in logging on to Windows.

How to confirm domain“Domain” for setting the registrationinformation for fingerprint authenticationcan be checked by the followingprocedure.

1. Click on “Start.”

2. Right-click on “My Computer,” andclick on “Properties” in the menuto be displayed.The “System Properties” window willappear.

3. Click on the “Computer Name” tab.

4. A name that has been set to “Fullcomputer name” is “Domain.”


7. Restart your computer.

Restarting the computer enables theregistration information that has been read(imported) to be effective.

LB_Emu E8210 P21-34 15/3/06, 10:37 am31

32

Setup window

Setting for fingerprint authentication can bechanged with “OmniPass control center.”

� How to start “OmniPass controlcenter”

Start “OmniPass control center” in the followingprocedure.


The “OmniPass control center” starts.

� User Management

• Adding and deleting users

Users that use fingerprint authentication canbe added and deleted.“Change registration information”

• User import/export

The user information that has already beenset can be saved (exported), or the userinformation that is saved can be read(imported).“Save/Read registration information”

� User settings

• Audio

Sound coming from the computer whenfinger authentication is used is set.

• Taskbar Tips

This setting is for messages to be displayed

in OmniPass icon in the notification area

in the bottom-right corner of your desktopwhen Windows is logged on.

• Enrollment

In addition to the fingerprints that havealready been registered, new fingerprints canbe added and registered.

You should periodically export your userprofile and store it in a safe place. Ifanything happens to your system, you canimport your OmniPass profile to a newsystem and have all your rememberedsettings and fingerprints instantly.

LB_Emu E8210 P21-34 15/3/06, 10:37 am32


33

Please remember the Windows logincredentials when exporting. When youexamine the impor tation, you areprompted for authentication. Thecredentials that will allow a user profile tobe imported are the Windows logincredentials of the exported user. They arethe credentials that had to be submittedwhen the user profile was exported. Youwill need User Name, Password, andDomain.

� System settings

• Starting option

Fingerprint authentication can be used forlogging on to Windows or you can terminateits use.

� Vault management

Manage information for logging into homepages.When this setting screen is displayed, thefingerprints that have already been registered areto be authenticated.“Register log-in information on homepages”

• ID management

A user ID (user name) to be logged inhomepages is managed.

• Password management

The user name and password for logging inhomepages by using fingerprintauthentication are managed. To change log-in information, delete log-in information once,then reregister it.

� Encrypt and Decrypt

It allows you to encrypt files and entire folderswith finger print sensor.

LB_Emu E8210 P21-34 15/3/06, 10:37 am33

34

� Scrolling

The Fingerprint sensor now comes with ascrolling function. Taking advantage of thesensor’s technology, users will be able to scrollup and down a document by swiping the fingerupwards to scroll up and swiping down to scrolldown.

Removing a user will automaticallydestroy all OmniPass data associatedwith that user. All identities andcredentials associated with the user willbe lost. If you are sure about removingthe user, we recommend you to exportthe user profile.

• File & Folder encryption

In order to encrypt a file or folder, click onthe folder or file to encrypt, right click on yourmouse button, choose “Omnipass EncryptFile(s)”. Omnipass will then perform theencryption on the file selected. To decrypt,click on the file and right click on your mousebutton and choose “Omnipass DecryptFile(s)”. Omnipass will decrypt your file forviewing.

Please take note that certain files and folderin Windows are not possible to encrypt.

Please refer to Omnipass help file in yourLifeBook for further information.

� Version information

Version information on fingerprint authenticationutility is displayed.

LB_Emu E8210 P21-34 15/3/06, 10:37 am34

Troubleshoot ing

35

TROUBLESHOOTING

Your Fujitsu LifeBook notebook is sturdy andundergoes strigent reliability tests. However, youmay encounter simple setup or operatingproblems that you can solve on the spot orproblems with peripheral devices, that you cansolve by replacing the device. The information inthis section helps you isolate and resolve someof these straightforward problems and identifyfailures that require service.

Identifying the Problem

If you encounter a problem, go through thefollowing procedure before pursuing complextroubleshooting:

1. Turn off your LifeBook notebook.

2. Make sure the AC adapter is plugged intoyour notebook and to an active AC powersource.

3. Make sure that any card installed in the PCCard slot is seated properly. You can alsoremove the card from the slot, thuseliminating it as a possible cause of failure.

4. Make sure that any devices connected to theexternal connectors are plugged in properly.You can also disconnect such devices, thuseliminating them as possible causes of failure.

5. Turn on your notebook. Make sure it has beenoff at least 10 seconds before you turn it backon.

6. Go through the boot sequence.

7. If the problem has not been resolved, referto the Troubleshooting Table that follows formore detailed troubleshooting information.

If you keep notes about what you have tried,your support representative may be able tohelp you more quickly by giving additionalsuggestions over the phone.

8. If you have tried the solutions suggested inthe Troubleshooting Table without success,contact your support representative.

Before you place the call, you should have thefollowing information ready so that the customersupport representative can provide you with thefastest possible solution:

• Product name

• Product configuration number

• Product serial number

• Purchase date

• Conditions under which the problem occurred

• Any error messages that have occurred

• Hardware configuration

• Type of device connected, if any

See the Configuration Label on the bottom of yournotebook for configuration and serial numbers.

Specific Problems

Using the Troubleshooting Table

When you have problems with your LifeBooknotebook, try to find the symptoms under theProblem column of the troubleshooting table. Youwill find a description of common causes for thatsymptom under the column Possible CauseFollow the instructions on the Possible Solutioncolumn to resolve the problem. All possiblecauses or solutions may not apply to yournotebook.

LB_Emu E8210 P35-47 15/3/06, 10:37 am35

36

There is no soundcoming from thebulit-in speakers.

The software volumecontrol is set too low.

Headphones are pluggedinto your notebook.

BIOS audio settingsare incorrect.

Software driver is notconfigured correctly.

The speakers have beenmuted using the Volumeicon in the system tray.

Adjust the sound volume control settings inyour software, operating system andapplications.

Plugging in headphones disables the built-inspeakers, remove the headphones.

Set the BIOS setup utility to the default valueswithin the Multimedia Device Configurationmenu.

Refer to your application and operating systemdocumentation for help.

Click on the Volume icon in the tool tray on thebottom right of the screen. (It looks like aspeaker).If the Mute box is checked, click on it touncheck it.

Troubleshooting Table

DVD/CD-RW/CD-ROM Drive Problems

Problem Possible Cause Possible Solution

Audio Problem

LifeBook notebookfails to recognizeDVD/CD-RW/ CD-ROM’s.

Protective sheet is still inthe DVD/CD-RW/CD-ROM drive tray.

DVD/CD-RW/CD-ROM isnot pushed down ontoraised center circle of thedrive.

DVD/CD-RW/CD-ROMtray is not latched shut.

Incorrect DVD Player orno DVD Player software isinstalled.

Replace DVD/CD-RW/CD-ROM in tray.

Open DVD/CD-RW/CD-ROM tray and re-install DVD/CD-RW/CD-ROM properly.

Push on the front of the DVD/CD-RW/CD-ROM tray until it latches.

Install DVD Player software.

LB_Emu E8210 P35-47 15/3/06, 10:37 am36

Troubleshoot ing

37

Note: Be sure to power down your LifeBook notebook before adding a printer to the PortReplicator parallel port.

Port Replicator Problems


DVD/CD-RW/CD-ROM Drive Problems

LifeBook notebookfails to recognizeDVD/CD-RW/ CD-ROM’s.

(continued)

The DVD/CD-RW/CD-ROM Accessindicator on theStatus IndicatorPanel blinks atregular intervalswhen no DVD/CD-RW/CD-ROM is inthe tray or theoptical drive is notinstalled.

LifeBook notebookdoes not turn onwhen installed inthe optional PortReplicator

Wrong drive designatorwas used for DVD/CD-RW/CD-ROM in theapplication.

Windows DVD/CD-RW/CD-ROM auto insertionfunction is disabled.

DVD/CD-RW/CD-ROM isdirty or defective.

The Windows DVD/CD-RW/CD-ROM autoinsertion function is activeand is checking to see if aDVD/CD-RW/CD-ROM isready to run.

Port Replicator ACadapter is not plugged in.

Notebook is not properlyseated in the PortReplicator.

Verify the drive designator used by theapplication is the same as the one used by theoperating system.When the operating system is booted from aDVD/ CD, drive designations are automaticallyadjusted.

Start the DVD/CD-RW/CD-ROM from thedesktop or application software or re-enablethe Windows DVD/CD-RW/CD-ROM autoinsertion function.

Wipe DVD/CD-RW/CD-ROM with a non-abrasive CD cleaning cloth and reinsert. It ifstill will not work try another DVD/CD-RW/CD-ROM in the drive.

This is normal. However, you may disable thisfeature.

Provide power to the Port Replicator.

Remove and re-dock your LifeBook notebook.

LB_Emu E8210 P35-47 15/3/06, 10:37 am37

38

Keyboard or Mouse Problems


Floppy Disk Drive Problems

You cannot accessyour floppy disk.

You cannot accessyour hard drive.

The built-inkeyboard doesnot seem to work.

You tried to write to a writeprotected floppy disk.

Floppy disk is notloaded correctly.

The floppy disk drive maynot be properly installed.

Security is set to protectaccess to floppy disk data.

The setup utility isincorrectly set for yourinternal (Primary Master)or optional second harddrive (Primary Slave).

The wrong drivedesignator was used byan application when abootable CD-ROM wasused to start thenotebook.

Security is set so youroperating system cannotbe started without apassword.

The notebook has goneinto Suspend mode.

Your application haslocked out your keyboard.

Eject the floppy disk and set it to write enable.

Eject floppy disk, check orientation and re-insert.

Remove and re-install your floppy disk drive.

Verify your password and security settings.

Revise BIOS settings to set both PrimaryMaster and Primary Slave correctly.

Verify drive designator used by application isin use by the operating system. When theoperating system is booted from a CD, drivedesignations are automatically adjusted.

Verify your password and security settings.

Push the Power/Suspend/Resume button.

Try to use your integrated pointing device torestart your system.

Hard Drive Problems

LB_Emu E8210 P35-47 15/3/06, 10:37 am38

Troubleshoot ing

39

Modem Problems


Keyboard or Mouse Problems

You have installedan externalkeyboard ormouse, and it doesnot seem to work.

You haveconnected anexternal keyboardor a mouse and itseems to belocking up thesystem.

Your Power Onscreen, or Mainmenu of the BIOSsetup utilityinformation, doesnot show thecorrect amount ofinstalled memory.

Messages aboutmodem operation.

Your external device is notproperly installed.

Your operating systemsoftware is not setup withthe correct software driverfor that device.

Your mouse or keyboardis connected to the wrongPS/2 port on the optionalPort Replicator.

Your operating systemsoftware is not setup withthe correct software driverfor that device.

Your system has crashed.

Your memory upgrademodule is not properlyinstalled.

You have a memoryfailure.

Messages about modemoperation are generatedby whichever modemapplication is in use.

Re-install your device.

Check your device and operating systemdocumentation and activate the proper driver.

Plug the mouse into the PS/2 Mouse port andthe external keyboard or numeric key pad intothe PS/2 Keyboard port.

Check your device and operating systemdocumentation and activate the proper driver.

Try to restart your notebook.

Remove and re-install your memory upgrademodule.

Check for Power On Self Test (POST)messages.

See your application software documentationfor additional information.

Memory Problems

LB_Emu E8210 P35-47 15/3/06, 10:37 am39

40


Parallel, Serial, and USB Device Problems

You have installeda parallel portdevice, a serialport device or aUSB device.Your LifeBooknotebook does notrecognize thedevice or thedevice does notseem to workproperly.

The device is notproperly installed.

The device may havebeen installed while anapplication was running,so your notebook is notaware of its installation.

Your device may not havethe correct software driveractive.

You may have the wrong I/O address selected foryour device.

Your device and anotherdevice are assigned thesame I/O address.

Parallel port is set tooutput only.

Remove and re-install the device.

Close the application and restart yournotebook.

See your software documentation and activatethe correct driver.

See your device documentation and softwaredocumentation to determine the required I/Oaddress.Change the settings in the BIOS setup utility.

Check all I/O addresses located within theBIOS setup utility and any other installedhardware or software to make sure there areno duplications.

Check parallel port setting in the BIOS and setto bi-directional or ECP.

LB_Emu E8210 P35-47 15/3/06, 10:37 am40

Troubleshoot ing

41

Power Failures


PC Card Problems

A card inserted inthe PC Card slotdoes not work oris locking up thesystem.

You turn on yourLifeBook notebookand nothing seemsto happen.

The card is not properlyinstalled.

The card may have beeninstalled while anapplication was running,so your notebook is notaware of its installation.

Your software may nothave the correct softwaredriver active.

You may have the wrongI/O address selected forthe activated PC Card.

Your PC Card device andanother device areassigned the same I/Oaddress.

The installed primarybattery is completelydischarged, there is nooptional second batteryinstalled or there is noPower adapter (ACadapter) installed.

The primary battery isinstalled but is faulty.

The battery or batteriesare low.

The power adapter (ACadapter) is not pluggedin properly.

Remove and re-install the card.

Close the application and restart yournotebook.

See your software documentation and activatethe correct driver.

See your PC Card documentation todetermine the required I/O address. Changethe settings in the BIOS.

Check all I/O addresses located within theBIOS setup utility and any other installedhardware or software to make sure there areno duplications.

Check the Status Indicator Panel to determinethe presence and condition of the batteries.Install a charged battery or a Power adapter.

Use the Status Indicator panel to verify thepresence and condition of the batteries. If abattery is indicating a short, remove thatbattery and operate from another powersource or replace that battery.

Check the Status Indicator Panel to determinethe presence and condition of the batteries.Use a Power adapter to operate until a batteryis charged or install a charged battery.

Verify that your adapter is connected correctly.

LB_Emu E8210 P35-47 15/3/06, 10:37 am41

42

You turn on yourLifeBook notebookand nothing seemsto happen.

(continued)

Your LifeBooknotebook turns offall by itself.

The power adapter (ACadapter) has no powerfrom the AC outlet.

The power adapter (ACadapter) is faulty.

The power managementparameters are set forauto timeouts which aretoo short for youroperating needs.

You are operating onbattery power only andhave ignored a low batteryalarm until the batteriesare all power drainedempty and your machinehas gone into DeadBattery Suspend mode.

You have a battery failure.

Your power adapter hasfailed or lost its powersource.

Move the AC cord to a different outlet, checkfor a line switch or tripped circuit breaker forthe AC outlet.

Try a different power adapter or install acharged optional second battery.

Press any button on the keyboard, or movethe mouse to restore operation. If that fails,push the Power/Suspend/Resume button.Check your power management settings, orclose your applications and go to the PowerOptions menu to adjust the timeout values tobetter suit your needs.

Install a power adapter or a charged batteryand then push the Power/Suspend/Resumebutton.

Verify the condition of the batteries using theStatus Indicator Panel, and replace or removebattery that is shorted.

Make sure the adapter is plugged in and theoutlet has power.


Power Failures

LB_Emu E8210 P35-47 15/3/06, 10:37 am42

Troubleshoot ing

43


Power Failures

Your LifeBooknotebook will notwork on batteryalone.

The batteriesseem to dischargetoo quickly.

The installed batteriesare dead.

No batteries are installed.

The batteries areimproperly installed.

Your installed batteriesare faulty.

You are running anapplication that uses agreat deal of power due tofrequent hard driveaccess or DVD/CD-ROMaccess, use of a modemcard or a LAN PC card.

The power savingsfeatures may be disabled.

The brightness is turnedall the way up.

The batteries are very old.

The batteries have beenexposed to hightemperatures.

The batteries are too hotor too cold.

Replace the battery with a charged one orinstall a Power adapter.

Install a charged battery.

Verify that the batteries are properlyconnected by re-installing them.

Verify the condition of the batteries using theStatus Indicator panel and replace or removeany batteries that are shorted.

Use both the primary battery and an optionalsecond battery and/or use a power adapter forthis application when at all possible.

Check the power management and/or setuputility settings in the Power Savings menu andadjust according to your operating needs.

Turn down the brightness adjustment. Thehigher the brightness the more power yourdisplay uses.

Replace the batteries.

Replace the batteries.

Restore the notebook to normal operatingtemperature. The Charging icon on the StatusIndicator panel will flash when the battery isoutside its operating range.

LB_Emu E8210 P35-47 15/3/06, 10:37 am43

44


Shutdown and Startup Problems

The SuspendResume b

copyright · • hotel, motel or apartment lobbies. • stores where telephones are used by patrons...

Documents