cs601 collection of old papers
TRANSCRIPT
-
8/8/2019 Cs601 Collection of Old Papers
1/50
WWW. vujannat.ning .COMConnecting VU Students
FINAL TERM EXAMINATION
SEMESTER FALL 2004
CS601-DATA COMMUNICATION
Total Marks:60
Duration:120min
StudentID/LoginID
Name
PVC Name/Code
Date
Maximum Time Allowed: (2 Hours)
Please read the following instructions carefully before attempting any question:
1. This examination is closed book, closed notes, closed neighbors.
2. Answ er all questions.
a. There is no choice.
b. You will have to answer correctly all questions in this examination to get themaximum possible marks.
3. Do not ask any questions about the contents of this examination from anyone.
a. If you think that there is something wrong w ith any of the questions, attempt it tothe best of your understanding.
b. If you believe that some essential piece of information is missing, make anappropriate assumption and use it to solve the problem.
4. Examination also consists of multiple-choice questions. Choose only one choice as youranswer.
a. If you believe that two (or more) of the choices are the correct ones for a particularquestion, choose the best one.
b. On the other hand, if you believe that all of the choices provided for a particularquestion are the w rong ones, select the one that appears to you as being the leastwrong.
**WARNING: Please note that Virtual University takes serious note of unfair means.Anyone found involved in cheating will get an `F` grade in this course.
For Teachers use only
-
8/8/2019 Cs601 Collection of Old Papers
2/50
Question Q1 Q2 Q3 Q4 MCQs Total
Marks
Question No: 1 Marks:12
Apply the Hamming code algorithm to transmit the seven bit data 1100111. Invert the 4 th bit of thetransmitted data and prove it at receiving end. The combination used to calculate each of the four r valuesfor a seven bit data sequence are as follows:
r1: bits 1, 3, 5, 7, 9, 11r2: bits 2, 3, 6, 7, 10, 11r3: bits 4, 5, 6, 7r4: bits 8, 9, 10, 11
Question No: 2 Marks:12
Describe the following functions of transport layer of OSI model?
1) Service-point addressing2) Connection Control
Question No: 3 Marks:10
Solve the following. Show all the work to get full credit.
1) If a periodic signal is decomposed into five sine waves with frequencies 1000, 2000,3000,4000,5000Hz, what is the bandwidth?
2) What is the bit rate of the following signals?a. A signal in which bit lasts for 0.001 seconds
b. A signal in which bit lasts for 2ms
Question No: 4 Marks:10
Briefly answer the following questions.
1) Give three examples each of Guided and Unguided Transmission Media?2) Briefly describe how even parity and odd parity work?
Question No: 5 Marks: 2
In fiber optics, the signal source is __________ waves.
light
radio
infrared
very low frequency
Question No: 6 Marks: 2
-
8/8/2019 Cs601 Collection of Old Papers
3/50
Wave division multiplexing (WDM) is conceptually the same as FDM, except that the multiplexing anddemultiplexing involve _________ signals.
analog
light
digital
periodic
Question No: 7 Marks: 2
Local loop is a connection between _______________ and ______________.
Subscribers handset and exchange
exchange and T-Lines
exchange and E-Lines
None of the above
Question No: 8 Marks: 2
In vertical redundancy check (VRC) a __________ bit is added to every data unit.
synchronization
framing
parity
interleaving
Question No: 9 Marks: 2
In cyclic redundancy checking, what is CRC?
The divisor
The remainder
The quotient
-
8/8/2019 Cs601 Collection of Old Papers
4/50
The dividend
Question No: 10 Marks: 2
Which error detection method involves polynomials?
CRC
VRC
LRC
Checksum
Question No: 11 Marks: 2
In stop and wait ARQ, if data 1 has an error, the receiver sends a ________ frame.
NAK
NAK 0
NAK 1
NAK 2
Question No: 12 Marks: 2Poll/Select line discipline requires _____________ to identify the packet recipient.
an address
a timer
a buffer
a dedicated line
-
8/8/2019 Cs601 Collection of Old Papers
5/50
http:/ / vujannat.ning.comBEST SITE TO HELP STUDENTS
FINALTERM EXAMINATION
FALL 2006
CS601 - DATA COMMUNICATION
Marks: 70
Time: 120min
StudentID/LoginID: ______________________________
Student Name: ______________________________
Center Name/Code: ______________________________
Exam Date:
Please read the following instructions carefully before attempting any question:1. This examination is closed boo k, closed notes, closed neighbors.2. Answ er all questions.
a) There is no choice.b) You w ill have to answer correctly all questions in this examination to get the
maximum possible marks.3. Do not ask any questions abo ut the contents of this examination from anyone.
a) If you think that there is something w rong w ith any of the questions, attemptit to the best of your understanding.
b) If you b elieve that some essential piece of information is missing , make anappropriate assumption and use it to solve the problem.
4. Choose only one choice as your answ er in the multiple choice question s.a) If you believe that tw o (or more) of the choices are the correct ones for a
particular question, choose the best one.b) On the other hand, if you believe that all of the choices provided for a
particular question are the w rong ones, select the one that appears to you asbeing the least wrong.
c) Objective question is compulsory5. Calculator is allow ed.
**WARNING: Please note that Virtual University takes serious note of unfair means.Anyone found involved in cheating will get an `F` grade in this course.
For Teacher's use only
Question 1 2 3 4 5 6 7 8 9 10 TotalMarksQuestion 11 12 13
Marks
Question No: 1 ( Marks: 1 ) - Please choose one
OSI standard is practically implemented in the form of internet.
TRUE
-
8/8/2019 Cs601 Collection of Old Papers
6/50
FALSE
Question No: 2 ( Marks: 1 ) - Please choose one
TCP/IP application layers combine the functions of OSI Application, Session and Transportlayers.
TRUE
FALSE
Question No: 3 ( Marks: 1 ) - Please choose one
Unipolar use one voltage levels.
TRUE
FALSE
Question No: 4 ( Marks: 1 ) - Please choose one
The material of core and cladding in fiber optic cable is same.
TRUE
FALSE
Question No: 5 ( Marks: 1 ) - Please choose one
Burst error is easily corrected then bit error.
TRUE
FALSE
Question No: 6 ( Marks: 1 ) - Please choose one
Set of rules governing communication is known as
OSI model
Protocol
Medium
Question No: 7 ( Marks: 1 ) - Please choose one
WDM(wave division multiplexing) deals with
electric waves
-
8/8/2019 Cs601 Collection of Old Papers
7/50
light waves
both
Question No: 8 ( Marks: 1 ) - Please choose one
A Null modem is a
traditional modem
technique to connect two DTE
both
Question No: 9 ( Marks: 1 ) - Please choose one
Router work on
data link layer
physical layer
network layer
Question No: 10 ( Marks: 1 ) - Please choose one
Poll/Select is a technique related with
line control
line discipline
error control
Question No: 11 ( Marks: 20 )
A) Summarize the function of network support layers in OSI reference model? [12Marks]
B) An analog signal carries 4 bits in each signal element. If 1000 signal elements are sent persecond, find the Baud Rate and Bit Rate? [8 Marks]
Question No: 12 ( Marks: 20 )
A) What is the range of microwave? Explain microwave transmission and its types? [10
-
8/8/2019 Cs601 Collection of Old Papers
8/50
Marks]
B) Write a Brief transmission impairments. [10 Marks]
Question No: 13 ( Marks: 20 )
A) Give exact mechanism and applications of token ring/bus and FDDI? [10 Marks]
B) A TELEPHONE line normally has bandwidth of 3000 Hz, the signal to noise ratio isusually 35dB.calculate the capacity of the channel? [10 Marks]
-
8/8/2019 Cs601 Collection of Old Papers
9/50
In cyclic redundancy checking, what is the CRC?
Question No. 1 Marks : 02
Total Marks: 66 Total Questions: 10
**WARNING: Please note that Virtual University takes serious noteof unfair means. Anyone found involved in cheating will get an `F`
grade in this course.
b. On the other hand, if you believe that all of the choicesprovided for a particular question are the w rong ones, selectthe one that appears to you as being the least wrong.
a. If you believe that two (or more) of the choices are the correctones for a particular question, choose the best one.
4. Examination also consists of multiple-choice questions. Chooseonly one choice as your answer.
b. If you believe that some essential piece of information ismissing, make an appropriate assumption and use it to solvethe problem.
a. If you think that there is something wrong with any of thequestions, attempt it to the best of your understanding.
3. Do not ask any questions about the contents of this examinationfrom anyone.
b. You w ill have to answer correctly all questions in thisexamination to get the maximum possible marks.
a. There is no choice.2. Answ er all questions.1. This examination is closed book, closed notes, closed neighbors.
Please read the following instructions carefully before attempting anyquestion:
Time Allow ed: 150 MinutesFinal Term Examination Spring 2005
CS601 Data Communication
www. vujannat.ning .com
-
8/8/2019 Cs601 Collection of Old Papers
10/50
r8: bits 8, 9, 10, 11r4: bits 4, 5, 6, 7r2: bits 2, 3, 6, 7, 10, 11r1: bits 1, 3, 5, 7, 9, 11
Apply the Hamming code algorithm to transmit the seven bit data 1101010. Invertthe 6 th bit of the transmitted data and prove it at receiving end. The combinations
used to calculate each of the four r values for a seven bit data sequence are asfollows:
Question No. 5 Marks : 12
Explain your answer with the help of simple diagram.2) when an acknowledgement lost1) when a data frame lostHow Go-Back-n ARQ method of Error Control works?
Question No. 4 Marks : 14
o Tree Topology
Mesh Topology oo Star Topology
o Ring Topology
Each device has a dedicated point to point line configuration only with the twodevices on either side of it.
Question No. 3 Marks : 02
o
Infrared oo Very Low frequency
o Radio o Light
In fiber optics the signal source is ____________waves.
Question No. 2 Marks : 02
o the remainder o the dividend o the quotient o the divisor
-
8/8/2019 Cs601 Collection of Old Papers
11/50
Note: In an asynchronous system, if we have 'n' input lines, the frame contains nomore than 'm' slots, where m is less than n.
2) Asynchronous TDM1) Synchronous TDM
Draw the transmitted frames using the following multiplexing techniques:
Question No. 9 Marks : 12
o Phase o Bit interval o Bandwidth o Amplitude
The _____________of a signal is the width of the frequency spectrum.
Question No. 8 Marks : 02
o None of the above o
Asynchronous TDM
o Synchronous TDM o FDM
Which multiplexing technique shifts each signal to a different carrier frequency?
Question No. 7 Marks : 02
Phase oo Wavelength
o
Bandwidth
o Decibel
Measures the relative strengths of two signals
Question No. 6 Marks : 02
-
8/8/2019 Cs601 Collection of Old Papers
12/50
An analog signal carries 7 bits in each signal element. If 1550 signal elements aresent per second. Find the baud rate and bit rate.
Question No. 10 Marks : 15
-
8/8/2019 Cs601 Collection of Old Papers
13/50
WWW. vujannat.ning .Com Connecting VU Students
Mesh
hich topology requires a multipoint connection?W
Question No. 4 Marks : 2
r4: bits 4, 5, 6, 7r8: bits 8, 9, 10, 11
r2: bits 2, 3, 6, 7, r1: bits 1, 3, 5, 7, 9, 11
10, 11
cbit of the transmitted data and prove it at receiving end. The combination used to
alculate each of the four r values for a seven bit data sequence are as follows:
thApply the Hamming code algorithm to transmit the seven bit data 1101101. Invert the4
Question No. 3 Marks : 20
Phase Time
Freque Amplitude
ncy
I
uestion No. 2
n a time-domain plot, the vertical axis is the measure of ________.Q Marks : 2
CRC Checksum
Two-d Simple parity check
imensional parity check
hich error detection method uses ones complement arithmetic?W
Question No. 1 Marks : 2
Time Allow ed: 150 Minutes Final Term Examination Spring 2006
CS601 Data Communication
-
8/8/2019 Cs601 Collection of Old Papers
14/50
Question No. 9 Marks : 2
An ARQ A NAK An ACK A data frame
A timer is set when ___________ is (are) sent out.
Question No. 8 Marks : 2
1 1 0 0 1 1 0 0 1 1
b) Encode the given bit stream using Alternate Mark Inversion (AMI) scheme of
Encoding. [10]
1 0 1 0 1 0 1 0 1 0
a) Encode the given bit stream using Return to Zero (RZ) scheme of Encoding. [10]
Question No. 7 Marks : 20
b) 1010010a) 1110101
Apply the checksum error detection technique at sending end to the following two bitstreams. If there is no error, prove at the receiving end that the pattern is OK.
Question No. 6 Marks : 10
d. Frames 5, 6 and 7 are sent; frames 4 through 7 are acknowledge.c. Frames 3, 4 and 5 are sent; frame 4 is acknowledged; timer for frame 5 expires.b. Frames 1 and 2 are sent; frame 1 and 2 are acknowledged.a. Frame 0 is sent; frame 0 is acknowledged.
Draw the sender and receiver windows for a system using Go-Back-N ARQ, given thefollowing:
Question No. 5 Marks : 20
Ring Bus Star
-
8/8/2019 Cs601 Collection of Old Papers
15/50
110111111 1010110
111111110
111111011
If the data unit is 111111, the divisor 1010, and the remainder 110, what is thedividend at the receiver?
-
8/8/2019 Cs601 Collection of Old Papers
16/50
W W W
. v u j a n
n a t. n i n g
. C O M
FINALTERM EXAMINATION
Spring 2009CS601- Data Communication
Question No: 1 ( Marks: 1 ) - Please choose on e
There are how many factors on which the performance of a network depends?
Three
Five
Four
Two
Question No: 2 ( Marks: 1 ) - Please choose one
_________requires the maximum number of I/O ports.
Bus
Star
Mesh
Ring
Question No: 3 ( Marks: 1 ) - Please choose one
Headers are added at layers 1 and 7 of OSI model.
True
False
Question No: 4 ( Marks: 1 ) - Please choose one
Visit vujannat.ning .Com For Video Lectures ,previous assigmnets ,Papers,Chat, Studydiscu ssions and many more.
http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/ -
8/8/2019 Cs601 Collection of Old Papers
17/50
W W W
. v u j a n
n a t. n i n g
. C O M
Trailer is only added at ________layer of OSI model.
data link
physical
network
application
Question No: 5 ( Marks: 1 ) - Please choose one
A sine wave must be an analog signal.
True
False
Question No: 6 ( Marks: 1 ) - Please choose one
If there is __________in voltage then the frequency is infinite.
instantaneous change
continuous change
no change
Question No: 7 ( Marks: 1 ) - Please choose one
The inversion of the level at 1 bit is called as __________
NRZ-L
NRZ-I
Visit vujannat.ning .Com For Video Lectures ,previous assigmnets ,Papers,Chat, Studydiscu ssions and many more.
http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/ -
8/8/2019 Cs601 Collection of Old Papers
18/50
W W W
. v u j a n
n a t. n i n g
. C O M
RZ
Question No: 8 ( Marks: 1 ) - Please choose one
The last process in PCM is _________ digital data into digital signal.
encoding
decoding
modulating
Question No: 9 ( Marks: 1 ) - Please choose one
Amplitude in ASK is more resistive to EMI and Noise.
True
False
Question No: 10 ( Marks: 1 ) - Please choose one
If FCC regulations are followed, the carrier frequencies of adjacent AM radiostations are ____________ apart.
5 KHz
10 KHz
200 KHz
530 KHz
Visit vujannat.ning .Com For Video Lectures ,previous assigmnets ,Papers,Chat, Studydiscu ssions and many more.
http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/ -
8/8/2019 Cs601 Collection of Old Papers
19/50
W W W
. v u j a n
n a t. n i n g
. C O M
Question No: 11 ( Marks: 1 ) - Please choose one
In _____________ transmission, a start bit and a stop bit frame a character byte.
Asynchronous serial
Synchronous serial
Parallel
Asynchronous & Synchronous serial
Question No: 12 ( Marks: 1 ) - Please choose one
Synchronous transmission have _____________.
a start bit
a stop bit
gaps between bytes
none of the given
Question No: 13 ( Marks: 1 ) - Please choose one
Transmission media are usually categorized as _____________
Fixed or Unfixed
Guided or Unguided
Determinate or Indeterminate
Metallic or Nonmetallic
Question No: 14 ( Marks: 1 ) - Please choose one
Visit vujannat.ning .Com For Video Lectures ,previous assigmnets ,Papers,Chat, Studydiscu ssions and many more.
http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/ -
8/8/2019 Cs601 Collection of Old Papers
20/50
W W W
. v u j a n
n a t. n i n g
. C O M
The RG number gives us information about ________.
Twisted pairs
Coaxial cables
Optical fibers
all of the given
Question No: 15 ( Marks: 1 ) - Please choose one
Radio wave and microwave frequencies range from _________.
3 to 300 KHz
300 KHz to300 KHz to 3 GHz
3 KHz to 300 GHz
3 KHz to 3000 GHz
Question No: 16 ( Marks: 1 ) - Please choose one
All of popular Fiber optic connectors are ___________ shaped.
Conical
Barrel
Circular
Rectangular
Question No: 17 ( Marks: 1 ) - Please choose one
Visit vujannat.ning .Com For Video Lectures ,previous assigmnets ,Papers,Chat, Studydiscu ssions and many more.
http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/ -
8/8/2019 Cs601 Collection of Old Papers
21/50
W W W
. v u j a n
n a t. n i n g
. C O M
In ______________ method a signal can be directed in a straight from Antennato antenna.
Line of sight
Ground propagation
Sky propagation
Microwaves
Question No: 18 ( Marks: 1 ) - Please choose one
Amplifiers are used to __________the signal to heat.
Amplify
Rectify
Testify
NUllify
Question No: 19 ( Marks: 1 ) - Please choose one
There are ________ basic categories of multiplexing.
3
4
2
5
Question No: 20 ( Marks: 1 ) - Please choose one
Visit vujannat.ning .Com For Video Lectures ,previous assigmnets ,Papers,Chat, Studydiscu ssions and many more.
http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/ -
8/8/2019 Cs601 Collection of Old Papers
22/50
W W W
. v u j a n
n a t. n i n g
. C O M
If a T-1 carries 8000 frames, the data rate is ___________
2.544 Mbps
1.544 Mbps
1.544 Kbps
1.544 Gbps
Questi on No: 21 ( Marks: 1 ) - Please choose one
FTTC stands for _____________ flexible to the curb
fiber to the curb
fiber to the cable
fiber to the center
Question No: 22 ( Marks: 1 ) - Please choose one
Optical signals are multiplexed using _________ at switching office to createwider BW optical signals
WDM
FDM
TDM
MUX
Question No: 23 ( Marks: 1 ) - Please choose one
Visit vujannat.ning .Com For Video Lectures ,previous assigmnets ,Papers,Chat, Studydiscu ssions and many more.
http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/ -
8/8/2019 Cs601 Collection of Old Papers
23/50
W W W
. v u j a n
n a t. n i n g
. C O M
Which error detection method consists of a parity bit for each unit as well as anentire data unit of parity bits?
Simple parity check
Two-dimensional parity check
CRC
Ch ecksum
Question No: 24 ( Marks: 1 ) - Please choose one
If the ASCII character G is sent and the character D is received, what type oferror is this?
Single-bit
Multiple-bit
Burst
Recoverable
Question No: 25 ( Marks: 1 ) - Please choose one
Flow control is needed to prevent ____________
Bit errors
Overflow of the sender buffer
Overflow of the receiver buffer
Collision between sender and receiver
Question No: 26 ( Marks: 1 ) - Please choose one
Visit vujannat.ning .Com For Video Lectures ,previous assigmnets ,Papers,Chat, Studydiscu ssions and many more.
http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/ -
8/8/2019 Cs601 Collection of Old Papers
24/50
-
8/8/2019 Cs601 Collection of Old Papers
25/50
W W W
. v u j a n
n a t. n i n g
. C O M
ENQ/ACK stands for______________
Enquiry/ Acknowledgment
Enque/ Acknowledgment
Enquist/ Acknowledgment
none of the given
Question No: 30 ( Marks: 1 ) - Please choose one
In __________ ARQ, if a NAK is received, only the specific damaged or lostframe is retransmitted.
Stop-and-wait
Go-Back-N
Selective repeat
Stop-and-wait & Go-back-N
Question No: 31 ( Marks: 1 ) - Please choose one
Sliding window requires that data frames be transmitted _______________
Sequentially
Frequently
Synchronously
Asynchronously
Question No: 32 ( Marks: 1 ) - Please choose one
Visit vujannat.ning .Com For Video Lectures ,previous assigmnets ,Papers,Chat, Studydiscu ssions and many more.
http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/ -
8/8/2019 Cs601 Collection of Old Papers
26/50
W W W
. v u j a n
n a t. n i n g
. C O M
Which of the following combines features of the other two.
ZMODEM
YMODEM
XMODEM
None of given
Question No: 33 ( Marks: 1 ) - Please choose one
BLAST stands for :
Blocked asynchronous transmission
Blocked synchronous transmission
Barrel asynchronous transmission
Below asynchronous transmission
Question No: 34 ( Marks: 1 ) - Please choose one
HDLC is an acronym for ______________.
High-duplex line communication
High-level data link control
Half-duplex digital link combination
Host double-level circuit
Question No: 35 ( Marks: 1 ) - Please choose one
Visit vujannat.ning .Com For Video Lectures ,previous assigmnets ,Papers,Chat, Studydiscu ssions and many more.
http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/ -
8/8/2019 Cs601 Collection of Old Papers
27/50
W W W
. v u j a n
n a t. n i n g
. C O M
The HDLC ___________ field defines the beginning and end of a frame.
Flag
Address
Control
FC S
Question No: 36 ( Marks: 1 ) - Please choose one
The shortest frame in HDLC protocol is usually the _________ frame.
Information
Supervisory
Management
None of the given
Question No: 37 ( Marks: 1 ) - Please choose one
The PDU has no flag fields, no CRC, and no station address
TRUE
FALSE
Question No: 38 ( Marks: 1 ) - Please choose one
_________ is the access protocol used by traditional Ethernet.
CSMA/CD
Visit vujannat.ning .Com For Video Lectures ,previous assigmnets ,Papers,Chat, Studydiscu ssions and many more.
http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/ -
8/8/2019 Cs601 Collection of Old Papers
28/50
W W W
. v u j a n
n a t. n i n g
. C O M
CSMA/CA
Token Ring
CSMA
Questio n No: 39 ( Marks: 1 ) - Please choose one
Repeater is an amplifier, not a regenerator.
True
False
Question No: 40 ( Marks: 1 ) - Please choose one
Bridges can divide a large ________ into smaller segments
Network
Packet
Frame
Address
Question No: 41 ( Marks: 2 )
Stop-and- wait ARQ has two control variables S and R. What are their functions?[2]
Go-back-n ARQSelective Reject ARQ
Question No: 42 ( Marks: 2 )
Visit vujannat.ning .Com For Video Lectures ,previous assigmnets ,Papers,Chat, Studydiscu ssions and many more.
http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/ -
8/8/2019 Cs601 Collection of Old Papers
29/50
W W W
. v u j a n
n a t. n i n g
. C O M
What's the name of the telephone service in which there is no need of dialing.
Question No: 43 ( Marks: 2 )
What is meant by Transmission Impairments?
Question No: 44 ( Marks: 3 )
How does the checksum checker know that the received data unit isundamaged? [3]
Question No: 45 ( Marks: 3 )
What is Geosynchronous satellite?
.Question No: 46 ( Marks: 3 )
Following abbreviations stands for?
1. ARP2. RARP3. ICMP
Question No: 47 ( Marks: 5 )
Name and discuss briefly the bits in the HDLC control field. [5]
Question No: 48 ( Marks: 5 )
Describe method of checksum briefly?
Visit vujannat.ning .Com For Video Lectures ,previous assigmnets ,Papers,Chat, Studydiscu ssions and many more.
http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/ -
8/8/2019 Cs601 Collection of Old Papers
30/50
W W W
. v u j a n
n a t. n i n g
. C O M
Question No: 49 ( Marks: 5 )
What is satellite communication?
Question No: 50 ( Marks: 10 )
In how many ways TDM can be implemented? Describe any one with example.
Visit vujannat.ning .Com For Video Lectures ,previous assigmnets ,Papers,Chat, Studydiscu ssions and many more.
http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/ -
8/8/2019 Cs601 Collection of Old Papers
31/50
3 A single bit is inverted per data unit2 A single bit is inverted per transmission1 A single bit is inverted
Which of the following best describes a single-bit error?
Question No. 1 Marks : 2
Total Marks: 60 Total
Questions: 12
**WARNING: Please note that Virtual University takes serious note of unfairmeans. Anyone found involved in cheating will get an `F` grade in this course.
b. On the other hand, if you believe that all of the choices provided for a particularquestion are the wrong ones, select the one that appears to you as being theleast wrong.
a. If you believe that two (or more) of the choices are the correct ones for aparticular question, choose the best one.
4. Examination also consists of multiple-choice questions. Choose only one choice asyour answer.
b. If you believe that some essential piece of information is missing, make anappropriate assumption and use it to solve the problem.
a. If you think that there is something wrong with any of the questions, attempt it tothe best of your understanding.
3. Do not ask any questions about the contents of this examination from anyone.
b. You will have to answer correctly all questions in this examination to get themaximum possible marks.
a. There is no choice.2. Answer all questions.1. This examination is closed book, closed notes, closed neighbors.
Please read the following instructions carefully before attempting any question:Instructions
Time Allow ed: 150 MinutesFinal Term Examination - February 2005
CS601 Data Communication
www. vujannat.ning .com
-
8/8/2019 Cs601 Collection of Old Papers
32/50
b. Selective Rejecta. Go-Back N
1) After transmitting several frames, the transmitter receives a NAK 'i' frame. Describe howthe transmitter reacts in the following error control protocols.
Briefly answer the following questions.
Question No. 6 Marks : 10
4 None of the above3 WDM2 FDM1 TDM
Which multiplexing technique involves signals composed of light beams?
Question No. 5 Marks : 2
4 Atmosphere3 Coaxial Cable
2 Fiber Optic Cable1 Twisted Pair
Which of the following is not a guided medium?
Question No. 4 Marks : 2
4 Fiber Optic Cable3 Twisted Pair2 Coaxial Cable1 Atmosphere
In an environment with many high-voltage devices, the best transmission mediumwould be _________.
Question No. 3 Marks : 2
4 Very Low Frequency3 Radio2 Light1 Infrared
In fiber optic cable, the signal source is__________ waves
Question No. 2 Marks : 2
4 Any of the above
-
8/8/2019 Cs601 Collection of Old Papers
33/50
1 Overflow of sender buffer
Flow Control is needed to prevent ____________
Question No. 11 Marks : 2
c. How does the receiver check whether the message T was transmitted without anyerrors?
b. What is the transmitted message T.
a. Given a message M = 1010001101, determine the CRC using the polynomial
P = x 5 + x4 + x2 + 1.
The following questions deal with CRC error detecting code.
Question No. 10 Marks : 12
4 Presentation3 Physical2 Application
1 Network
The _______ layer changes bits into electromagnetic signals.
Question No. 9 Marks : 2
2) Find the maximum data rate of a noiseless 4-kHz channel-using Analog encodinge.g. QPSK with 2 bits per sample?
1) A binary signal is sent over a 3 kHz. Channel. Signal's S/N ratio is 3162 (36dB).Calculate the maximum achievable data rate?
Solve the following. Show all the work to get full credit.
Question No. 8 Marks : 10
4 Network 3 Transport2 Application1 Presentation
Layer 2 lies between the physical layer and the _______ layer.
Question No. 7 Marks : 2
2) A communication protocol is an agreement required between two or more communicationentities and consists of three essential components. Name and describe briefly eachcomponent
-
8/8/2019 Cs601 Collection of Old Papers
34/50
Draw the digital signals for the bit string 0101 0100 1100 111 using NRZ-I and RZencoding schemes. A 0 is represented by a high value and a 1 is represented by a lowvalue.
Question No. 12 Marks : 12
4 Collision between sender and receiver 3 Bit Errors2 Overflow of the receiver buffer
-
8/8/2019 Cs601 Collection of Old Papers
35/50
WWW. vujannat.ning .COMConnecting VU Students
MID TERM EXAMINATION
SEMESTER Fall 2004
CS601- DATA COMMUNICATION
Total Marks:50
Duration:60min
StudentID/LoginID
Name
PVC Name/Code
Date
Maximum Time Allowed: (1 Hour)
Please read the following instructions carefully before attempting any question:
1. The duration of this examination is 60 minutes.
2. This examination is closed book, closed notes, closed neighbors.
3. Answ er all questions.
4. Do not ask any questions about the contents of this examination from anyone.
a. If you think that there is something wrong w ith any of the questions, attempt it tothe best of your understanding.
b. If you believe that some essential piece of information is missing, make anappropriate assumption and use it to solve the problem.
**WARNING: Please note that Virtual University takes serious note of unfair means.Anyone found involved in cheating will get an `F` grade in this course.
For Teachers use only
Question Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9 TotalMarks
Question No: 1 Marks:5
What is the difference between active and passive hubs?
-
8/8/2019 Cs601 Collection of Old Papers
36/50
Question No: 2 Marks:5
Which particular layer of OSI model is not required, if two devices communicate at the same network?Explain your answer with reason. Question No: 3 Marks:5
A sine wave is offset (amount of wave shift) 1/6 of a cycle with respect to time zero. What is its phase indegrees?
Question No: 4 Marks:8
Which particular scheme is used in the following figure for digital to digital conversion? Explain youanswer with argument.
Question No: 5 Marks:5
Which of the following determines the bandwidth required to send the signal?
1) Bit rate2) Baud rate
Explain with example.
Question No: 6 Marks:7
A constellation diagram consists of eight equally spaced points on a circle. If bit rate is 4800 bps, what is the BaudRate?
Question No: 7 Marks:5
How noise effect on ASK? What do you know about On-Off Keying (OOK) technique?
Question No: 8 Marks: 5
Differentiate between the terms Full Duplex and Half Duplex?
Value
1 0 0 1 1 1 0
Time
-
8/8/2019 Cs601 Collection of Old Papers
37/50
Question No: 9 Marks: 5
What do you know about DTE and DCE?
-
8/8/2019 Cs601 Collection of Old Papers
38/50
WWW. vujannat.ning .comhttp:/ / vujannat.ning .com
Largest Online Community of VU Students
MIDTERM EXAMINATION FALL 2006
CS601 - DATA COMMUNICATION
Marks: 55
Time: 60min
StudentID/LoginID: ______________________________
Student Name: ______________________________
Center Name/Code: ______________________________
Exam Date:
Please read the following instructions carefully before attempting any question:
1. This examination is closed book, closed notes, closed neighbors.
2. Answ er all questions.
a. There is no choice.
b. You w ill have to answer correctly all questions in this examination toget the maximum possible marks.
3. Do not ask any questions about the contents of this examination fromanyone.
a. If you think that there is something w rong with any of the questions,attempt it to the best of your understanding.
b. If you believe that some essential piece of information is missing, makean appropriate assumption and use it to solve the problem.
4. Choose only one choice as your answer in the multiple choice questions.
a. If you believe that two (or more) of the choices are the correct ones fora particular question, choose the best one.
b. On the other hand, if you believe that all of the choices provided for aparticular question are the wrong ones, select the one that appears toyou as being the least w rong.
**WARNING: Please note that Virtual University takes serious note of unfair means.Anyone found involved in cheating will get an `F` grade in this course.
http://www.vupages.com/http://www.vupages.com/http://www.vupages.com/http://forum.vupages.com/http://forum.vupages.com/http://forum.vupages.com/http://forum.vupages.com/http://www.vupages.com/ -
8/8/2019 Cs601 Collection of Old Papers
39/50
For Teacher's use onlyQuestion 1 2 3 4 5 6 7 8 Total
Marks
Question No: 1 ( Marks: 15 )
Briefly explain Transmission Tasks.( to the point and brief)
Question No: 2 ( Marks: 10 )
Explain briefly the mechanical and functional specifications of EIA 232.
Question No: 3 ( Marks: 20 )
Compare Digital Data Transmission methods and Bipolar encoding techniques.
Question No: 4 ( Marks: 2 ) - Please choose one
A null modem is used between two DTE.
True
False
Question No: 5 ( Marks: 2 ) - Please choose one
Serial transmission is more speedy then parallel transmission.
True
False
Question No: 6 ( Marks: 2 ) - Please choose one
Transport layer is responsible for
entire message delivery
each packet delivery
End to end delivery
Question No: 7 ( Marks: 2 ) - Please choose one
Which transmission method is less costly
-
8/8/2019 Cs601 Collection of Old Papers
40/50
serial
parallel
synchronous
Question No: 8 ( Marks: 2 ) - Please choose one
DB25 and DB9 are the mechanical specifications of
RS232
EIA232
EIA 530
-
8/8/2019 Cs601 Collection of Old Papers
41/50
Calculate the Bit Rate of the Digital signal given below?
Question No. 2 Marks : 5
Find the Bandwidth for an FSK signal transmitting at 4000 b/s. Transmission is half-duplexand the carrier's separation band is 3000 Hz?
Question No. 1 Marks : 5
Total Marks: 50 TotalQuestions: 9
**WARNING: Please note that Virtual University takes serious notice of using unfairmeans. Anyone found involved in cheating will get `F` grade in this course.
b. If you believe that some essential piece of information is missing, make anappropriate assumption and use it to solve the problem.
a. If you think that there is something wrong with any of the questions, attempt it tothe best of your understanding.
4. Do not ask any questions about the contents of this examination from anyone.3. Answer all questions.2. This examination is closed book, closed notes, closed neighbors.1. The duration of this examination is 90 minutes.
Please read the following instructions carefully before attempting any question:
Instructions
Time Allow ed: 90 Minutes
Mid Term Examination - November 2004
CS601 Data Communication
www. vujannat.ning .com
-
8/8/2019 Cs601 Collection of Old Papers
42/50
What is the sampling rate for PCM if the frequency ranges from 1000 to 4000 Hz?
Question No. 7 Marks : 5
A sine wave completes one cycle in 4 seconds. What is its frequency?
Question No. 6 Marks : 5
2 If the baud rate is 4000 bauds/second, what will be the Bit rate of the signal for thegiven baud rate?
1 What Modulation Technique does the Constellation represent?
Consider the Constellation Diagram given below:
Question No. 5 Marks : 5
0 1 0 0 1 1 0 1 1 1 00 0 0 1
Encode the given bit stream using Unipolar, NRZL and NRZI schemes of Encoding.
Question No. 4 Marks : 10
The bit rate of a signal is 3000. If each signal carries six bits, what is the Baud rate?
Question No. 3 Marks : 5
Time
condsnanose16
-
8/8/2019 Cs601 Collection of Old Papers
43/50
What do you know about Tree topology?
Question No. 9 Marks : 5
The frequency spectrum has a bandwidth of 500 MHz with the highest frequency componentat 600 MHz. What should be the minimum Sampling Rate according to the Nyquist Theorem?
Question No. 8 Marks : 5
-
8/8/2019 Cs601 Collection of Old Papers
44/50
ww w.vujannat.nin g.com
Question No. 1 Marks : 2
**WARNING: Please note that Virtual University takes serious note of unfairmeans. Anyone found involved in cheating will get an `F` grade in this course.
b. On the other hand, if you believe that all of the choicesprovided for a particular question are the wrong ones, selectthe one that appears to you as being the least wrong.
a. If you believe that two (or more) of the choices are the correctones for a particular question, choose the best one.
4. Choose only one choice as your answer in the multiple choicequestions.
b. If you believe that some essential piece of information ismissing, make an appropriate assumption and use it to solvethe problem.
a. If you think that there is something wrong with any of thequestions, attempt it to the best of your understanding.
3. Do not ask any questions about the contents of this examinationfrom anyone.
b. You w ill have to answ er correctly all questions in thisexamination to get the maximum possible marks.
a. There is no choice.
2. Answ er all questions.
1. This examination is closed book, closed notes, closed neighbors.
Please read the following instructions carefully before attempting any
question:
Time Allow ed: 90 MinutesMid Term Examination Spring 2006
CS601 Data Communication
mailto:[email protected]:[email protected]:[email protected]:[email protected] -
8/8/2019 Cs601 Collection of Old Papers
45/50
The information to be communicated in a data communication system is the___________.
Question No. 5 Marks : 2
Transport Network Data Link Physical
The __________ layer is the layer closest to the transmission medium.
Question No. 4 Marks : 2
b) Access Control.a) Physical Addressing.
Write details of the following functions of data link layer with respect to OSI model.
Question No. 3 Marks : 10
One of the disadvantages of using point to point (Mesh) network is that the number of connections grows more rapidly as the number of computers increase. Find the numberof connections needed to be used in point to point (Mesh) topology in network of 10 andthan 40 computers. Also find that how many I/O ports are needed for each device in bothcases. Also write formulas used to solve this question?
Question No. 2 Marks : 14
PSK FSK ASK QAM
Which of the following is most affected by voice ?
-
8/8/2019 Cs601 Collection of Old Papers
46/50
Bandwidth Phase Period Frequency
Amount of time a signal needs to complete one cycle is ____________
Question No. 9 Marks : 2
0 0 0 1 1 1 0 0 Encode the given bit stream using Manchester encoding scheme.
Question No. 8 Marks : 16
We want to digitize the human voice. What is the bit rate, assuming 8 bits per sample?Also write formulas used to solve this question.
Question No. 7 Marks : 10
None of these Both Asynchronous Synchronous
In ________________ transmission a timing of signal is unimportant.
Question No. 6 Marks : 2
Transmission Message Protocol Medium
-
8/8/2019 Cs601 Collection of Old Papers
47/50
W W W
. v u j a n
n a t. n i n g
. C O M
MIDTERM EXAMINATIONSpring 2009
CS601- Data Communication (Session - 1)
Question No: 1 ( Marks: 1 ) - Please choose o ne
InRS 422 Balanced mode two lines carry ________ signals which are not identical to each other. same different digital analog
Question No: 2 ( Marks: 1 ) - Please choose oneThe
__________ generates the data and passes it along with any control information to a___________.
DTE; DCE DCE; DTE
DCE; node DTE; application
Question No: 3 ( Marks: 1 ) - Please choose oneIn
_____________ transmission, a start bit and a stop bit frame a character byte. Asynchronous serial Synchronous serial Parallel Asynchronous & Synchronous serial
Question No: 4 ( Marks: 1 ) - Please choose oneIn
_____________ transmission, bits are transmitted simultaneously, each across its own wire. Asynchronous serial Synchronous serial Parallel Asynchronous & Synchronous serial
Question No: 5 ( Marks: 1 ) - Please choose one
Asynchronous transmission is ___________ slow costly non-effective fast
Question No: 6 ( Marks: 1 ) - Please choose one
Visit vujannat.ning .Com For Video Lectures ,previous assigmnets ,Papers,Chat, Studydiscu ssions and many more.
http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/ -
8/8/2019 Cs601 Collection of Old Papers
48/50
W W W
. v u j a n
n a t. n i n g
. C O M
In
____________ transmission the timing of the signal is unimportant. Asynchronous
SynchronousPolar
Bi-polar
Question No: 7 ( Marks: 1 ) - Please choose oneIn
8QAM each signal shift or one baud represents ______. 4 bits 2 bits 5 bits 3 bits
Question No: 8 ( Marks: 1 ) - Please choose one
PCM is the first process of PAM. True False
Question No: 9 ( Marks: 1 ) - Please choose oneBi
phase encoding is a type of bipolar encoding in which we use two voltage levels. True False
Question No: 10 ( Marks: 1 ) - Please choose oneThe
amplitude of a digital signal depends upon the________ to represent a bit. phase voltage wavelength
Question No: 11 ( Marks: 1 ) - Please choose one
Time domain plot show changes in signal phase with respect to time. True False
Question No: 12 ( Marks: 1 ) - Please choose oneOSI
model was developed prior to TCP/IP model . True False
Visit vujannat.ning .Com For Video Lectures ,previous assigmnets ,Papers,Chat, Studydiscu ssions and many more.
http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/ -
8/8/2019 Cs601 Collection of Old Papers
49/50
W W W
. v u j a n
n a t. n i n g
. C O M
Question No: 13 ( Marks: 1 ) - Please choose oneThe
_________ layer is the layer closest to the transmission medium.
physical data link network transport
Question No: 14 ( Marks: 1 ) - Please choose oneData
chunk at data link layer is called________framepacketdatagram
Question No: 15 ( Marks: 1 ) - Please choose one Theinternet model consists of _________ layers.
three two five seven
Question No: 16 ( Marks: 1 ) - Please choose one
__________representation of links that connect nodes is called as physical topology.
geometrical logicalphysical
Question No: 17 ( Marks: 1 ) - Please choose one
_______ is a multipoint topology. Ring Mesh Tree Bus
Question No: 18 ( Marks: 1 ) - Please choose oneIn
mesh topology, if there are five nodes then there will be _______ links. 5 10 15 20
Visit vujannat.ning .Com For Video Lectures ,previous assigmnets ,Papers,Chat, Studydiscu ssions and many more.
http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/http://www.virtualians.com/ -
8/8/2019 Cs601 Collection of Old Papers
50/50
W W W
. v u j a n
n a t. n i n g
. C O M
Question No: 19 ( Marks: 1 ) - Please choose one
Nonproprietary standard is also termed as de facto standard.
True
False
Question No: 20 ( Marks: 1 ) - Please choose one
Effective network mean that the network has fast delivery, timeliness and high bandwidth duplex transmission accurate transmission low bandwidth
Question No: 21 ( Marks: 2 )
What is purpose of distributed processing?
Question No: 22 ( Marks: 3 )
What is HDB3.
Question No: 23 ( Marks: 5 )
Differentiates between the following terms. [10 marks](a) Syntax and Semantics of protocol.(b) Network management and exchange management.(c) Monolithic and structured .
Question No: 24 ( Marks: 10 )
Differentiate between the following terms.
a) Frequency spectrum and bandwidth .
(b) Bandwidth and throughput .
(c) Bit interval and bit rate.
http://www.virtualians.com/http://www.virtualians.com/