Curriculum Vitae

NAME: Darren M. Marshall JOB TITLE: Rig Manager

RESIDENCE: Canada / Mexico

AVAILABILITY FOR WORK: Immediate

INTERVIEW AVAILABILITY: Immediate

LOCATIONS WILL WORK: Worldwide

SALARY: Negotiable

COMPANY: Dalma Gulf Drilling

ADDRESS: 1st. Floor ADC Building Prince Sultan st.79707 Al Khobar 31952Kingdom of Saudi Arabia

TELEPHONE: +1-403-803-6359

E-MAIL: darrenmm03@yahoo.com

PROFILE Began career in 1991, experienced in oil and gas fields, in H2S wells and oil base mud Working with NOV Amphion touch screens, joy stick and cyber chair (last eight years on

cyber rigs, jack ups and land based) Experienced in oil and gas fields, in H2S wells, oil, water and silicate based mud, many HPHT

wells in the Rocky Mountains of Canada and the desserts of Kuwait, Iraq and Saudi Arabia. I promoted a safety culture and I follow legislation, company policy, standards and

procedures, because safety is a major priority, I am happy to say that in 8 years as a Driller and 4 years as a Toolpusher I have a Zero injuries or LTI record that I am very proud of.

I kept the maximum HSE and operational efficiency (no injury to personnel and no damage to rig equipments in this time)

I have the ability to identify the symptoms and characteristics of operational difficulties and the technical knowledge of the performance of different tools available

I understand the industry and colleagues in a multi national team, plus I have the ability to communicate with people and the ability to foster a positive work atmosphere in a team

EDUCATION Lord Beaverbrook High School Canada Graduation year: 1985 General Studies Specialization: Sciences (Chemistry & Physics)

TRAINING AND QUALIFICATIONS

IWCF (supervisor level)- Blow out prevention and control of oil and gas wells –surface BOP stack / International Oilfield Training Solutions Calgary Canada, certificate no. DL4S00034159-01-TKNL valid until 13.11.2016 I have the Level 4 Surface BOP Stack

IADC Well Cap #WSE602209, Exp 23-Aug-2017 BOSIET expired H2S Alive Confined Space Entry & Rescue Basic fire fighting Standard first aid Dropped Objects,Dalma Gulf Drilling certificate, June 2015. Slips,Trips and Falls, Dalma Gulf Drilling certificate, June 2015.. Working at Height, Dalma Gulf Drilling certificate June 2015 Tolbox Risk Identification Card, Dalma Gulf Drilling certificate, June 2015. Environmental Awareness, Dalma Gulf Drilling certificate June 2015 Manual Handling, Dalma Gulf Drilling certificate, June 2015. Enchanged Drilling Reporting System, Dalma Gulf Drilling certificate June 2015 Banksman & Slinging Dalma Gulf Drilling certificate June 2015 Fire Watcher KCA Deutag certificate Aug 2013 Hazardous Substanes Awareness, Dalma Gulf Drilling certificate, June 2015. Man Riding Operations Dalma Gulf Drilling certificate, June 2015. Rigging & Lifting. Dalma Gulf Drilling certificate, June 2015.

CAREER HISTORY

June 2015 – October 2016Dalma Gulf EnergyRig ManagerLR-7 in Northern Saudi Arabia 2000 hp drawworks NOV TDS 11S, 2x Bomco 1600 mud pumps, 4x Cat 3512 engines, 20,000 ft rig with 13-5/8” 5K BOP

LR-216, LR-217, LR-218, I moved to the south part of Saudi Arabia and moved from rig to to rig as a roving Rig Manager at first to help with rig moves as that is a strong point of mine and later to help with drilling opperations before taking over on LR-217. All have the same equipment as they are sister rigs, this was quite handy as we could share any new information or strategies gained with the other rigs when budgetary restraints industry wide forced some changes onto Aramco and then subsequentially onto us. We had changes in lease size which caused some issues that forced us to alter the layout of the rig and some minor rig move changes as well.

January 2013 – Febuary 2015KCA Deutag ToolpusherBen Rinnes Jack up Drawworks type Nationale 1625 DE with 3000 HP,Elmagco 7838 with battery back up, Varco TDS-8SA ,hook load 1.500.000 lbs @ 14 lines- derrick MH Pyramid 160 ft height,3x National 12-P-160 mud pumps,7500 psi stand pipe pressure,Cameron 21 1/4x 10,000 psi BOP equipment.

T-223 (Land based triple Desert rig) Drawworks – Bentec E1500 AC SG, TDS Bentec 500 HT, Infodrill cyber system, Bentec VFD, 2x Bomco 1600 mud pumps, Cameron 10 000 psi BOP equipment

I was envolved with the Ben Rinnes while it was still offshore Gabon even though I was hired to run the T-223 small triple desert rig. While T-223 was being comissioned and still in the yard, I was loaned out and later put back on T-223 as we prepared to and went out to the field where we did indepth personnel performance evaluations This is the location where we drilled exploration, workover and completions wells in the Sahara Desert

Manage over 100 people and logistics in remote locations ie. The Sahara Desert and Gabon.

Feb 2012 – Nov 2012HRQuestNight ToolpusherB-312, 5th Gen. cyber jack up rig Keppel Fels B-class, Amphion Cyber system; Drawworks NOV ADS-10T 3000 HP, Mud Pumps 3x Lewco W-2215 1x gumbo box 7500 psi 2200 HP Top Drive NOV TDS-8SA 750 ton, Rottary table NOV 49.5 in. Dia model RST,15 k Shaffer BOP stack.

I was involved in offshore drilling operations for Chornomornaftogaz Petroleum in The Black Sea, Ukraine.

I worked in oil and gas fields with H2S. I drilled explorations (HTHP) and productions wells, between 9000 ft-19000 ft depth (vertical, directional, horizontal wells).

I helped manage over 100 people and logistics.

September 2011 – January 2012Tuscany DrillingNightToolpusher

I was involved with In-Country setup, scouting out supplies/parts availability/fabrication. Co-ordinated with customs, ship captain & dock personnel in Guyana South America to

load out rig and transport to Trinidad & Tobago, also supervised crews in rigging up 113

March 2011– Aug 2011Kuwait DrillingCyber DrillerKDI land rig 10 Two stacks complete with annular, 21-1/4” 10,000PSI and 13-5/8” 15,000 PSI with four cavities and shear bonnets, 15,000 PSI choke manifold, 15,000 PSI, kill line, and cementing lines NOV 750 ton TDS, 7500 psi, NOV 37 ½ in Rotary, VFD, Oilwell E3000 3000 HP Drawworks, NOV Ideal auto driller with disc brakes and Joystick control, 3x1700 HP, Oilwell-1700PT, 7500 PSI each with 2x GE752 Dc motors, 100HP

I was involved in drilling HTHP deep wells and a world record casing run I worked in oil and gas fields, when I drilled explorations wells (vertical and directional

wells- 25000+ ft depth), the wells were with H2S

Feb 2010 – Dec 2010Weatherford Drilling IraqCyber DrillerNOV cyber chair, LTI 1500 TDS 3x Lewco mud pumps, 3000 HP Drawworks

I was involved in drilling HTHP wells in Northen Iraq I worked in oil and gas fields, when I drilled explorations wells (vertical and directional

wells- 20000+ ft depth), side-tracking job, The wells were with H2S

Aug 2008 – Dec 2009High Arctic Energy Service IndiaCyber DrillerRapid rig, PLC system dual joy stick cyber system

I was involved in drilling exploration and completion wells in Northern India I managed a crew of up to 40 people and dealt with locals concerns on rig moves

2007 2008DMM ConsultingPresidentDirectional drilling consultant for Halliburton

I was involved in SAGD wells in the oil sands in Northern Alberta where I would stay within a 1 meter target for up to 1000 meters in a horizontal section.

1999 – 2007Nabors Drilling CanadaDerrickhand – Driller

I worked on several different rigs at this time, mostly conventional triples but a couple telescopic doubles as well, ranging from 1000 HP to 3000 HP

Drilled many exploration, completion and injection wells, both vertical and deviated in the high H2S Brazeau field, in the difficult Rocky Mountains and many other trying areas.

1994 – 1996Brelco Drilling CanadaMotorhand

I joined Brelco Drilling as a motorhand on a conventional Kelly triple rig # 14. I learned how rigs operated and how to maintain it to peak operational performance. In some remarkably cold winters, we ran 2 boilers to keep up with the harsh working conditions and this is also where I learned how to be a Derrickhand (which I was for 5 years)

1991 – 1993Beaver Drilling CanadaFloorhand

I began my career on the rigs on Beaver Drilling rig 7, a conventional Kelly triple with TSM 8000 Drawworks, catheads and spinning chain, 2x continental Emsco F 1000 mud pumps

1984Aerrow Oilfield Construction

General oilfield construction - Involved in shut downs, turn arounds, acid jobs, building and maintaining pump jacks, loading perforating guns and installing separators.