digital and proportional miniature solenoid valves - rometec · x-valve® is a two-position,...
TRANSCRIPT
1Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Pneutronics Division
Digital and ProportionalMiniature SolenoidValves
Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/USVALVES
Min
iature V
alves
X-VALVE
Valve Type:
3-Way, 2 PositionNO, NC & Distributor(50 psi, NC or NO only)(100 psi, NC only)
Media:Non-Reactive Gases and Select Liquids
Operating Environment: 0 to 50°C15 to 50°C for 100 psi
Storage Temperature: -40 to 70°C
Length: 24 mm (.92 in)
Width: 7.9 mm (.31 in)
Height: 9 mm (.35 in)
Spacing: 8 mm (centerline)
Porting: Universal barbs for 1/16" I.D. tubing(1/32" Wall Max.); Manifold mount with X-seal
Weight: 0.16 oz (4.5 grams)
Internal Volume: 0.074 cm3 (.0045 in3)
Leak Rate: <0.016 sccm (6 psi Silicone) <0.16 sccm (6 psi EPDM & FKM)<0.2 sccm (50 & 100 psi only)Response: <20 msec cyclingPressure:0 to 6 psig 0 to 30 psig0 to 50 psig0 to 100 psig
Minimum Flow: 4 lpm @ 6 psi 6 lpm @ 30 psi5 lpm @ 50 psi9 lpm @ 100 psi
Orifice Sizes/Equivalent Cv: 0.020"/0.005 Cv (100 psid)0.030"/0.007 Cv (50 psid)0.030"/0.010 Cv (30 psid)0.045"/ 0.018 Cv (6 psid)
PBT (Polybutylene Terephthalate);430 Series Stainless Steel; 302Series Stainless Steel (passivated);FKM (Fluoroelastomer); EPDM(Ethylene Propylene DieneMonomer); and Silicone
Consult factory for details.
Physical Properties
Power: 0.5 Watt (low pressure model) 1.0 Watt (high pressure model)
Voltage:3, 5, 12, 24 VDC
Not all voltage options are availablein all models. See Ordering Info.Electrical Connections: PC Pins, 4 mm centers (all models)
Electrical
Wetted Materials
Performance Characteristics
X-Valve®
X-Valve® is a two-position, three-way universal digital valve, just 8mm in width.The X-Valve’s unitized body incorporates its functional features in a singleglass-reinforced, PBT (Polybutylene Terephthalate) molded body.
✦ Provides compact size; only 8mm in width.
✦ Meets a range of pressure requirements including 6, 30, 50 & 100 psi.
✦ Offers optional capabilities to meet a 0.016 sccm leakage specification (0.2 sccm for 50 & 100 psi) for over 25 million cycles.
✦ Ensures high reliability with its single piece body design.
✦ Allows for direct tubing connection or a radial seal for manifold assembliesthrough its universal barb design.
8mm Digital Solenoid Valve
Features
X-Valve is a registered trademark of Parker Hannifin Corporation.
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/USVALVES
Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences Rev 1.5
X-VALVE
CAD Drawing
Flow
Sample Part ID X 1 05 1 F _ 0
Description Series Model Voltage Electrical Connection
Elastomer _ Optional Accessories
No: Pressure/Orifice/Coil Wattage/Type 03: 3 VDC S: Standard Pins F: FKM S: Screws (2)
1: 6 psi/0.045"/0.5 Watt/Universal L: Long Pin G: Gasket
Options 2: 30 psi/0.030"/1 Watt/Universal B: Screw & Gasket
3: 50 psi/0.030"/1 Watt/NC 12: 12 VDC 0: No Accessories
Accessory field not printed
on valve
05: 5 VDCc
(6psi only)
24: 24 VDC 4: 50 psi/0.030"/1 Watt/NO
5: 100 psi/0.020"/1 Watt/NC
E: EPDM
S: Silicone
(6psi only)
(6psi only)
Ordering Information
NOTE: Please consult Parker Life Sciences for other considerations. For more detailed
information, visit us on the Web.
.479 [12.17]
4Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/US
VALVES
Min
iature V
alves
X-SYSTEM
Media:Air & Inert Gases
Leakage:0.016 sccm external
Operating Temperature:0 to 50° C
Valve Mounting Centerline:8 mm (0.31 in)
Electrical Connection Centerline:4 mm (0.16 in)
Storage Temperature:-40 to 70° C
Pressure:0 to 30 psig
Size (stock profile):25.4 mm x 13.5 mm (1.0 in x 0.53 in)
Service Life (cycles of valve assemblyand disassembly):3 minimum
Flow SLPM:Unrestricted X-Valve flow
Physical Properties
See X-Valve® (page 2) for valve description.Parker can assemble a manifold to meetyour pneumatic specifications. Standardmanifold is offered through ten positions;consult factory for application requiringmore than ten positions.
Special Notes
X-System™
X-System™ offers molded modular pneumatic manifold technology designed to support the 8 mm X-Valve® products. The X-System is a durable thermo-elastomer assembly incorporating several innovative design features and provides significant advantages over traditional aluminum materials. It is available in both inline and diverter assembly configurations.
✦ No screws or seals required for valve mounting.
✦ Lightweight and low cost.
✦ Ideal for "rapid prototyping" (eliminates the need for machining a manifold).
✦ Mixed 2-Way and 3-Way assemblies possible (consult factory).
✦ "Mixed" pneumatic logic in diverter assembly; multiple operating pressuresinclude vacuum, hybrid, and partitioned manifold options.
✦ Shorter OEM design cycles and faster delivery times.
Inline Assembly
Dimensions
Features
Inline Assembly/Diverter Assembly
X-Valve is a registered trademark and X-System
is a trademark of Parker Hannifin Corporation.
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/US
VALVES
5Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
X-SYSTEM
Diverter Assembly
Sample Part ID 912 _ 000 6 02 1 01
Description Series _ End Caps Number of Valves on Left of Diverter
Configuration X-Valve Selection
6: No 01-10 1: 2-Way NC (common supply to NC Port1, Port 3 plugged) 01-18
7: Yes 2: 2-Way NC (common supply to common Port 2, Port 3 plugged)
Options 3: 2-Way NO (common supply to common Port 2, Port 3 plugged)
4: 2-Way NO (common supply to NO Port 3, Port 1 plugged)
5: 3-Way NC (common supply to NC Port 1)
6: 3-Way NO (common supply to NO Port 3)
7: Distributor (common supply to common port 2)
8: 3-Way NC (common supply to NC Port 1, common exhaust)*
* Not available with end caps
X-System
Consult factory for larger assemblies
Insert the last two digits
of the valve 912 p/n in
this location
(See Doc.#:
912-000001-XXX
Contact factory for
information)
_
_
Sample Part ID 912 _ 6 6 01 01 _ 6 01
Description Series _ End Caps Number of Valves on Left of Diverter
X-Valve Selection Diverter Module Selection _ Number of Valves on Right of Diverter
X-Valve Selection
6: No 0-9 01-18 01: Diverter Block 1 0-9 01-18
7: Yes 02: Diverter Block 2
Options 03: Diverter Block 3
04: Diverter Block 4
05: Diverter Block 5
06: Diverter Block 6
07: Diverter Block 7
08: Diverter Block 8
Insert the last two digits
of the valve 912 p/n in
this location
X-System
Total number of valves not to exceed 10 (Consult factory for additional requirements)
Insert the last two digits
of the valve 912 p/n in
this location
(Contact factory for
information)
Total number of valves not to exceed 10 (Consult factory for additional requirements)
(See Doc.#:
912-000001-XXX
Contact factory for
information)
Ordering Information
InlineAssembly
DiverterAssembly
NOTE: Please consult Parker Life Sciences for other considerations. For more detailed information, visit us on the Web,
or call and refer to Drawing #s: 890-003100-001 (inline); 890-003112-001 (diverter) and Spec. #790-002176-001.
6Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/US
VALVES
Min
iature V
alves
TEN-X
Valve Type:
2-Way, 2 Position, NO (NIBP)
Media:Non-Reactive Gases
Operating Environment: 0 to 50°C Operating Coil Temp: Max 85°CStorage Temperature: -40 to 70°C
Length: 32 mm (1.25 in)
Width: 9.9 mm (0.390 in)
Height: 12 mm (0.475 in)
Spacing: 10 mm (centerline)
Porting: Barb fitting for 0.078" I.D. Polyurethanetubing
Manifold mount with Ten-X seal
Weight: 0.39 oz (11 grams)
Internal Volume: 0.131 cm3 (0.0080 in3)
Leak Rate: <0.016 sccm (bubble tight) Response: <5 msec on timePressure:0 to 6 psig
Minimum Flow: 8 lpm @ 6 psi
Orifice Sizes/Equivalent Cv: 0.060"/0.032 Cv
LCP (Liquid Crystal Polymer); 430 Series Stainless Steel; 302 Series Stainless Steel/Nickel-Plated Silicone Elastomer
Physical Properties
Power: 0.5 Watt (2-Way, NO Model)
Voltage:5, 12, 24 VDC
Electrical Connections: PC Pins, 6 mm centers (all models)
Electrical
Wetted Materials
Performance Characteristics
Ten-X®
Ten-X® is a 10mm solenoid valve with a two-position, two-way Normally Open (NO) design. Ten-X delivers repeatable "energized" and "de-energized"response times, low power, and flow capability to meet the specific performance requirements of Non-Invasive Blood Pressure (NIBP) devices.
✦ Delivers fast and repeatable "open" and "drop-out" response times (<5 msecincludes first shot "open" times) critical to step deflation algorithms over the entire environmental temperature range and continuous duty operationof the valve.
✦ Highest flow of any 10mm solenoid valve with a Cv of .032 and flow of 8 slpm @ 6 psig.
✦ Meets the demands for bleed and dump processes, ensuring comfortableand safe operation.
✦ Single piece body design reduces total size and part count. Fewer partsincrease reliability and reduce both the number of potential leak points andthe overall "stack-up" tolerances.
✦ Universal barb design allows for maximum installation flexibility usingeither a direct tubing connection or a radial seal for manifold assemblies.
Features
10mm Solenoid Valve
Ten-X is a registered trademark of Parker Hannifin Corporation.
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/US
VALVES
7Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
TEN-X
Flow Dimensions
Sample Part ID 914 _ 1 1 05 1 _ 000
Description Series _ Elastomer Type Voltage Electrical Connection
_ Optional Accessories
1: Silicon 1: 2-Way NO
(NIBP Only)
05: 5 VDC 1: Short Pin
12: 12 VDC 2: Long Pin
Options 24: 24 VDC
000: No Accessories
Accessories may be
ordered separately at no
extra charge:
Screw:191-000112-010
Gasket: 195-000211-001
1
Model
No: Pressure/Orifice/Coil Wattage
1: 0-6 psi/0.060"/0.5 Watt
Ordering Information
Pressure Decay
NOTE: Please consult Parker Life Sciences for other considerations. For more detailed information, visit us
on the Web, or call and refer to Performance Spec. #790-002213-001 and Drawing #890-003150-001.
8Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/US
VALVES
Series 11, 25, 26
Min
iature V
alves
SERIES 11, 25, & 26
Valve Type:
2-Way or 3-Way, 2 Position(NO, NC, & Distributor)
Media:Gases and select liquids
Operating Environment: 0 to 70°C
Storage Temperature: -40 to 70°C
Length: 1.73 in (43.94 mm)
Width: 0.625 in (15.88 mm)
Height: 0.67 in (17.02 mm)
Porting: 10-32 tapped ports, 1/16”, 5/64”, or1/8” Stem Barbs
Weight: 2.1 oz. (60 grams)
Internal Volume: 0.026 in3 (without fittings)
Filtration: 40 micron (recommended)
Lubrication: None required
Leak Rate: <0.016 sccm (bubble tight) Response: <30 msec cycling (2 Watts)Pressure:0 to 100 psig (0.030" orifice)0 to 70 psig (0.050" orifice)
Vacuum: 0-27 in Hg
Orifice Sizes/Equivalent Cv:0.030"/0.017 Cv0.050"/0.035 Cv
Physical PropertiesPower: 0.5, 1.0, or 2.0 Watts
Voltage:5, 12, 24 VDC + 10%
Electrical
Wetted Materials
Performance Characteristics
Series 11, 25, and 26 PC Mountable Solenoid Valves convert a digital electricalsignal into a digital pneumatic output. The patented miniature design is preferred by medical and analytical OEMs worldwide and allows valves to be soldered directly onto a printed circuit board, providing both electrical termination and mechanical attachment. These valves power small cylindersdirectly or can be used to pilot larger valves that require high flow.
Flow
Body:360 HO2 Brass; 302 SeriesStainless Steel (passivated)
Stem Base:385 HO2 Brass; 303 SeriesStainless Steel (passivated)
All Others:FKM; EPDM; 430 FR SeriesStainless Steel (passivated); 302 Series Stainless Steel
✦ Offer a discrete valve design with a 200 million life cycle rating.
✦ Available in manifold mounting.
✦ Provide a range of electrical coil options, including PC mountable, spadelugs, or wire leads.
✦ Powerful enough for a range of uses that require high flow.
Features
PC Mount Digital Solenoid Valve
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/US
VALVES
9Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
SERIES 11, 25, & 26
Ordering Information
Sample Part ID 11 10 3 BV 12 P 7 7
Description Series Model Number Type Material Voltage Coil Type Pneumatic Connection Body
Pneumatic Connection Stem
No: Pressure/Orifice/Coil Wattage 1: 2-Way NC XX: Body/Plunger & Seal 5: 5 VDC 0: No Barbs 0: Type 1/None
10: 0-100 psi/0.030"/2 Watts 2: 2-Way NO BV: Brass/FKM 12: 12 VDC
P: PC Mount, 4 PC Pins
6: 1/16" Barbs
Options 12: 0-70 psi/0.050"/2 Watts 3: 3-Way NC or SV: Stainless Steel/FKM 24: 24 VDC 7: 5/64" Barbs
13: 0-50 psi/0.030"/1 Watt
4: 3-Way NO
BE: Brass/EPDM
F: Wire Leads, 18" No Term
8: 1/8" Barbs
6: 1/16" Barbs*
15: 0-25 psi/0.050"/1 Watt
Distributor
7: 5/64" Barbs
16: 0-25 psi/0.030"/0.5 Watt
8: 1/8" Barbs
18: 0-10 psi/0.050"/0.5 Watt
* 1/16" Barbs not
available for 0.050"
orifice valves
Selection of stainless steel
body may extend lead time
11
Dimensions
NOTE: Series 25 and Series 26 valves are no longer standard product. Consult factory for qualified opportunities.
Please consult Parker Life Sciences for other considerations. For more detailed information, visit us on the Web,
or call and refer to Performance Spec. #790-002075-001 and Drawing #890-003016-001.
10Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/US
VALVES
Valve Type:
2-Way or 3-Way, 2 Position(NO, NC, & Distributor)
Media:Non-Corrosive Gases
Operating Environment: 0 to 70°C
Storage Temperature: -40 to 70°C
Length: 1.73 in (43.94 mm)
Width: 0.625 in (15.88 mm)
Height: 0.67 in (17.02 mm)
Porting: Barb fittings for 1/8" I.D. tubing or manifold mount
Weight: 1.2 oz (34.29 grams)
Internal Volume: 0.016 cm3 (nominal)
Filtration:40 micron (recommended)
Lubrication: None required
Leak Rate: <0.2 sccmResponse: <30 msec cycling (2 Watts)Pressure:0 to 100 psig (0.030" orifice)0 to 30 psig (0.050" orifice)
Vacuum: 0-27 in Hg
Orifice Sizes/Equivalent Cv:0.030"/0.017 Cv0.050"/0.035 Cv
Body:PBT
Stem Base:360 HO2 Brass
All Others:FKM; 430 FR Series Stainless Steel(passivated); 302 Series StainlessSteel; Loctite® 290
Physical PropertiesPower: 0.5, 1.0, or 2.0 Watts
Voltage:5, 12, 24 VDC + 10%
Electrical
Wetted Materials
Performance Characteristics
V2 ValveThe V2 valve offers a unique plastic body, which provides an economical solution without compromising on quality or reliability. Parker offers the versatile V2 in either a manifold mount design or with molded barbed fittings.This PC and manifold mountable solenoid valve converts a digital electrical signal into a digital pneumatic output.
Min
iature V
alves
Value Squared Digital Solenoid Valve
V2
✦ Cost-effective, unique Polybutylene Terephthalate (PBT) body.
✦ Manifold mount design or molded barbed fittings to fit a range of needs.
Features
Flow
Loctite® is a registered trademark of Henkel Consumer Adhesives, Inc.
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/US
VALVES
11Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
V2
Dimensions
Ordering Information
Sample Part ID V2 14 3 PV 12 P 8 8
Description Series Model Number Type Material Voltage Coil Type Body Styles Topseat Barbs
No: Pressure/Orifice/Coil Wattage 1: 2-Way NC XX: Body/Plunger & Seal 5: 5 VDC 0: Manifold 0: None (Type 1)
10: 0-100 psi/0.030"/2 Watts 3: 3-Way NC or PV: Plastic/FKM 12: 12 VDC
P: PC Mount, 4 PC Pins
8: 1/8" Barbs 8: 1/8" Barbs
Options 13: 0-50 psi/0.030"/1 Watt
4: 3-Way NO
24: 24 VDC
F
14: 0-30 psi/0.050"/2 Watts
Distributor
: Wire Leads, 18"
17: 0-15 psi/0.050"/1 Watt
20: 0-6 psi/0.050"/0.5 Watt
NOTE: Please consult Parker Life Sciences for other considerations. For more detailed information, visit us
on the Web, or call and refer to Performance Spec. #790-002156-001 and Drawing #890-003080-001.
12Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/USVALVES
SRS Valve
Min
iature V
alves
Manifold Mountable Plastic Solenoid Valve
SRS
Valve Type:
3-Way, 2 Position(NO, NC, & Distributor)
Media:Gases and select liquids
Operating Environment: 0 to 55°C
Storage Temperature: -40 to 70°C
Length: 1.5 in (38.1 mm)
Width: 0.394 in (10 mm)
Height: 0.61 in (15.49 mm)
Porting: Manifold mount; Gasket andscrews supplied
Weight: .23 oz (6.57 grams)
Internal Volume: 0.0267 cm3
Filtration:40 micron (recommended)
Lubrication: None required
Leak Rate: <0.016 sccm (bubble tight)Response: <30 msec cycling (2 Watts)Pressure:0 to 85 psig (0.020" orifice)0 to 50 psig (0.030" orifice)0 to 20 psig (0.045" orifice)
Vacuum: 0-27 in Hg
Orifice Sizes/Equivalent Cv:0.020"/0.0075 Cv0.030"/0.017 Cv0.045"/0.027 Cv
Crystalline Plastics:PBT; LNP Thermocomp®
Elastomers:FKM
Non-Corrosive Metals:302 Series Stainless Steel; 430 FRSeries Stainless Steel; CMI-B CoreIron; Electroless Nickel Plating
Physical Properties
Power: 0.5, 1.0, or 2.0 Watts
Voltage:5, 12, 24 VDC + 10%
Electrical
Wetted Materials
Performance Characteristics
The 10mm SRS Series Plastic Solenoid Valve converts a digital electrical signalinto a digital pneumatic output. The SRS Valve is constructed of engineeringthermoplastics and non-corrosive metals to exceed the specifications demandedby critical applications in the life sciences.
✦ Design incorporates thermoplastics and non-corrosive metals.
✦ Offers high-density manifold mounting with convenient manifold to PCboard interface.
✦ Weighs only 0.23 ounces; perfect where low weight is critical to overall system.
Features
Flow
Thermocomp® is a registered trademark of General Electric Company.
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/USVALVES
13Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences Rev 1.5
SRS
Dimensions
Ordering Information
Sample Part ID SRS 10 2 P V 12 M
Description Series Model Number Type Material Seal Material Voltage Electrical Connection
No: Pressure/Orifice/Coil Wattage 1: 3-Way NC P: Engineering Plastic V: FKM 5: 5 VDC F: 0.025" Square Pins, Front
10: 0-35 psi/0.020"/0.5 Watt 2: 3-Way NO 12: 12 VDC
Options 11: 0-85 psi/0.020"/1 Watt 3: Distributor 24: 24 VDC
13: 0-20 psi/0.030"/0.5 Watt
14: 0-50 psi/0.030"/1 Watt
16: 0-10 psi/0.045"/0.5 Watt
17: 0-20 psi/0.045"1 Watt
M: 0.025" Square Pins,
Manifold Interface
L: Insulated Wire Leads,
18", Front
NOTE: Please consult Parker Life Sciences for other considerations. For more detailed information, visit us
on the Web, or call and refer to Performance Spec. #790-002090-001 and Drawing #890-003061-001.
14Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/US
VALVES
Min
iature V
alves
MD PRO
Valve Type:
2-Way Normally Closed
Media:Air, argon, helium, hydrogen,methane, nitrogen, oxygen, & others
Operating Environment: 0 to 60°C
Storage Temperature: -40 to 70°C
Length: 1.785 in (45.34 mm)
Width: 0.625 in (16.51 mm)
Height: 0.67 in (17.02 mm)
Porting: 1/8” barbs; manifold mount with 43 micron screen
Weight: 2.2 oz (62.86 grams)
Internal Volume: 0.031 in3 (.508 sccm)
Filtration:43 micron
Lubrication: None required
Oxygen Clean: Available
Leak Rate: <0.22 sccm of air (bubble tight)Response: <30 msec cyclingPressure:0 to 100 psig (See Ordering Info.)
Vacuum: 0-27 in Hg
Orifice Sizes: (See Ordering Info.)0.040" (1.02 mm)0.050" (1.27 mm)0.065" (1.65 mm)
Physical Properties
Power: 2.0 Watts maximum
Voltage:See Coil Selection under Ordering Information
Electrical Performance Characteristics
MD PROThe MD PRO is a miniature solenoid-operated proportional valve that providesapplication-specific OEM solutions.
Non-Thermally Compensated Proportional Valve
Flow
✦ Offers automated calibration.
✦ Provides repeatability across its operating range.
✦ Offers a superior combination of value and performance.
✦ Rated for 10 million life cycles.
Features
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/US
VALVES
15Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
MD PRO
Dimensions
Ordering Information
Sample Part ID MDPRO 4 V A F 8 S
Description Series Model Number Elastomer Coil Selection Electrical Interface Pneumatic Interface Cleaning
F: Wire Leads, 18"
P: PC Board Mount
Options 4: 75 psid/0.040" 8: 1/8" Barbs
5: 100 psid/0.050"
A: 5.5 VDC/11 ohms/0.304 amps
6: 50 psid/0.065"
B: 8 VDC/23 ohms/0.212 amps
C: 11.5 VDC/47 ohms/0.152 amps
D: 13.5 VDC/68 ohms/0.125 amps
E: 20 VDC/136 ohms/0.091 amps
F: 29 VDC/274 ohms/0.066 amps
* Max Voltage for continuous full flow,
ambient temperature 55°C
#: Max. Operating Pressure/Orifice Size S: Standard
Cleaning
O: Oxygen Service*
*Selection of this
option affects the
valve price; contact
factory for details
V: FKM 1: Manifold Mount with
Screen*
X: Max Voltage/Resistance/Current*
* 43 Micron Screen
(Port 2)
Coil Resistance for Room Temp
Input Current for Full Flow
NOTE: Please consult Parker Life Sciences for other considerations. For more detailed information, visit us on
the Web, or call and refer to Performance Spec. #790-002206-001 and Drawing #890-003022-001.
Parker Hannifin CorporationPneutronics Divisionwww.parker.com/pneutronics
Catalog PLS01-1001/USVALVES
Min
iature V
alves
HF PRO
Valve Type:
2-Way Normally Closed
Media:Air, argon, helium, hydrogen,methane, nitrogen, oxygen, & others
Operating Environment: 0 to 50°C
Storage Temperature: -40 to 70°C
Length: 1.785 in (45.34 mm)
Width: 0.625 in (16.51 mm)
Height: 0.67 in (17.02 mm)
Porting: Manifold Mount; Barbed body [5 mm (0.195”) ID Tube]
Weight: 2.2 oz (62.86 grams)
Internal Volume: 0.031 in3 (.508 sccm)
Filtration:43 micron
Lubrication: None required
Oxygen Clean
Leak Rate: 0.5 SCCM Max. N2 at 1 and 10 psid*
Response: <30 msec cyclingPressure:0 to 50 psig
Vacuum: 0-27 in Hg
Effective Orifice Size: 0.070" (1.8mm)
* Low differential pressure represents theworst case condition due to the reverseflow (pressure-assist) nature of the valve.
Physical Properties
Power: 2.25 Watt nominal at 68° F (20°C)3 Watt max
Voltage:See Coil Selection under Ordering Information
Electrical Performance Characteristics
HF PROThe High Flow MDPro controls the flow of gas proportionally to inputcurrent. The valve may be driven with DC current or Pulse Width Modulation. HF Pro achieves optimal system performance when it uses closed loop feedback.
High Flow Standard Performance Proportional Valve
Flow
HF Pro Typical Flow
0
10
20
30
40
50
60
0.000 0.025 0.050 0.075 0.100 0.125 0.150 0.175
Current (Amps)
Flow
Rat
e (s
lpm
)
Media: NitrogenCoil: 68 Ohm
10 psi20 psi30 psi40 psi50 psi
✦ Capable of 60 lpm flow and pressures up to 50 psig
✦ Face seal manifold mount or 5mm barbed body options
✦ Proven performance to 35 million life cycles
✦ Non-thermally compensated proportional valve
Features
For more information, call us at 1-603-595-1500
Min
iatu
re V
alve
s
Catalog PLS01-1001/USVALVES
Parker Hannifin CorporationPneutronics Divisionwww.parker.com/pneutronics
HF PRO
Dimensions
Ordering Information
Sample Part ID HFPRO 7 V A F 8 O
Description Series Model Number Elastomer Coil Selection Electrical Interface Pneumatic Interface Cleaning
F: Wire Leads, 18"
Options
8: Barbed BodyA: 5.5 VDC/11 ohms/0.304 amps
D: 13.5 VDC/68 ohms/0.125 amps
F: 29 VDC/274 ohms/0.066 amps
* Max Voltage for continuous full flow,
ambient temperature 55°C
#: Max. Operating Pressure/Orifice Size O: Oxygen ServiceV: FKM 1: Manifold Mount X: Max Voltage/Resistance/Current*
Coil Resistance for Room Temp
Input Current for Full Flow
7: 50 psid
NOTE: Please consult Parker Pneutronics for other considerations. For more detailed information, visit us on the Web, or call
and refer to Performance Spec. #790-002243-001 and Drawing #890-003191-001 (Manifold) or #890-003192-001 (Barbed).
Barbed Body Option
Manifold Mount Option
16Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/US
VALVES
Min
iature V
alves
VSO
Valve Type:
2-Way Normally Closed
Media:Air, argon, helium, hydrogen,methane, nitrogen, oxygen, & others
Operating Environment: 0 to 55°C
Storage Temperature: -40 to 70°C
Length: 1.785 in (45.34 mm)
Width: 0.625 in (16.51 mm)
Height: 0.67 in (17.02 mm)
Porting: Barbs or 10-32 female; manifoldmount with screens
Weight: 2.2 oz (62.86 grams)
Internal Volume: 0.031 in3 (.508 sccm)
Filtration:Types 1 & 2: 17 micronTypes 3, 4, 5, & 6: 40 micron
Lubrication: None required
Oxygen Clean: Available
Physical Properties
VSO®
The VSO®, Voltage Sensitive Orifice, is a miniature solenoid valve that controlsthe flow of gas in proportion to input current. You can drive the valve with eitherDC current or pulse width modulation and use closed loop feedback to deliveroptimal system performance. Medical and analytical OEMs worldwide chooseVSO as their preferred miniature proportional valve.
Normally Closed Proportional Solenoid Valve
Flow
Leak Rate: < 0.2 sccm of helium (bubble tight)Response: <30 msec cycling (2 Watts)Pressure:0 to 150 psig
Vacuum: 0-27 in Hg
Orifice Sizes: (See Ordering Info.)0.010" (0.245 mm)0.020" (0.510 mm)0.030" (0.762 mm)0.050" (1.270 mm)0.065" (1.651 mm)
Power: 2.0 Watts maximum
Voltage:See Coil Selection under OrderingInformationOxygen and analytically clean:Standard
Electrical Performance Characteristics
✦ Offers operating pressure up to 150 psig and a range of orifice sizes.
✦ Satisfies a 0.2 sccm leakage specification of He for 100 million life cyclesand offers high repeatability.
✦ Provides computer-automated calibrations and full calibration traceability.
✦ Uses either DC current or pulse width modulation with closed loop feedback to deliver optimal system performance.
✦ Maintains ideal flow through thermal compensation.
Features
VSO is a registered trademark of Parker Hannifin Corporation.
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/US
VALVES
17Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
VSO
Dimensions
Ordering Information
Sample Part ID VSONC 1 S 11 V A F 8
Description Standard Model Number Series Body Series Elastomer Coil Selection Electrical Interface Pneumatic Interface (Series 11 only except
with Option 5)
11: Series 11
C: FFKM*/Brass
F: Wire Leads, 18" 0: Manifold MountV: FKM/Brass
Options1: 150 psid/0.010"
I: FKM/Stainless Steel2: 150 psid/0.020"
H: FFKM*/Stainless Steel
A: 5.5 VDC/11 ohms/0.304 amps
3: 150 psid/0.030"
B: 8 VDC/23 ohms/0.212 amps
4: 75 psid/0.040"
C: 11.5 VDC/47 ohms/0.152 amps
5: 100 psid/0.050"
D: 13.5 VDC/68 ohms/0.125 amps
6: 50 psid/0.065"
E: 20 VDC/136 ohms/0.091 amps8: 1/8" Barbs
F: 29 VDC/274 ohms/0.066 amps
#: Max. Operating Pressure/Orifice
25: Series 25
(available in
nickel-plated
brass only)
1: Manifold Mount with
Screens* (this option will
affect price)
5: 10-32 Threaded
Female (Series 25)*Selection of this option affects
the valve price; consult factory
for details
P: PC Board Mount,
4 PC Pins
X: Max Voltage/Resistance/Current*
* Max Voltage for continuous full flow,
ambient temperature 55°C
Coil Resistance for Room Temp
Input Current for Full Flow
NOTE: Please consult Parker Life Sciences for other considerations. For more detailed information, visit us
on the Web, or call and refer to Performance Spec. #790-002115-001 and Drawing #890-003022-001.
18Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/US
VALVES
Min
iature V
alves
VSO LOW FLOW
Valve Type:
2-Way Normally Closed
Media:Air, argon, helium, hydrogen, methane,nitrogen, oxygen, & others
Operating Environment: 0 to 55°C
Storage Temperature: -40 to 70°C
Length: 1.785 in (45.34 mm)
Width: 0.625 in (16.51 mm)
Height: 0.67 in (17.02 mm)
Porting: Manifold mount with 17 micron screens
Weight: 2.2 oz (62.86 grams)
Internal Volume: 0.031 in3 (.508 sccm)
Filtration:17 micron
Lubrication: None required
Oxygen Clean: Available
Physical Properties
VSO® Low FlowThe VSO® LF (Low Flow) offers the same benefits as the VSO® valve withenhanced flow control for applications where control is critical or flow isrequired below 600 sccm. This miniature solenoid-operated valve automatesthe flow of gas in proportion to the input current.
Normally Closed Proportional Solenoid Valve
Flow
Leak Rate: <0.2 sccm of helium (bubble tight)Response: <15 msec cyclingOrifice Sizes: (See Ordering Info.)0.003" (0.076 mm)
Power: 2.0 Watts maximum
Voltage:See Coil Selection under OrderingInformationOxygen and analytically clean:Standard
Electrical Performance Characteristics
✦ Uses either DC current or pulse width modulation; closed loop feedback delivers optimal system performance.
✦ Offers computer automated calibrations and full calibration traceability.
✦ Rated for 10 million life cycles.
✦ Maintains ideal flow through thermal compensation.
✦ Highly repeatable.
Features
VSO is a registered trademark of Parker Hannifin Corporation.
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/US
VALVES
19Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
VSO LOW FLOW
Dimensions
Ordering Information
Sample Part ID 910 _ 000200 _ 001
Description Series _ Model Number _ Coil Selection
Options
001: 6.5 VDC/47 ohms/0.152 amps
002: 8 VDC/68 ohms/0.115 amps
003: 12 VDC/136 ohms/0.080 amps
004: 18 VDC/274 ohms/0.060 amps
VSO, Low Flow, 0.003" orifice size
* Max Voltage for continuous full flow, ambient Temp 55°C,
X: Max Voltage/Resistance/Current*
Coil Resistance for Room Temp, Input Current for Full Flow
NOTE: Please consult Parker Life Sciences for other considerations. For more detailed information, visit
us on the Web, or call and refer to Performance Spec. #790-002160-002 and Drawing #890-003022-022.
20Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/US
VALVES
Min
iature V
alves
LONE WOLF
Valve Type:
2-Way Normally Open
Media:Air, nitrogen, oxygen, & others
Operating Environment: 0 to 50°C
Storage Temperature: -40 to 70°C
Length: 1.785 in (45.34 mm)
Width: 0.625 in (16.51 mm)
Height: 0.67 in (17.02 mm)
Porting: Manifold mount with 43 micronscreens, 1/8" Barbs, 5/64" Barbs
Weight: 2.2 oz (62.86 grams)
Internal Volume: 0.031 in3 (.508 sccm)
Filtration:40 micron
Lubrication: None required
Physical Properties
Lone WolfWith its patented technology, the Lone Wolf valve has the highest performancecharacteristics of any Normally Open proportional valve available on the market. This VSO® valve offers silent operation, provides repeatable high-speedperformance, and ensures maximum accuracy.
Normally Open Proportional Valve
Flow
Leak Rate: Internal: 0.2 sccm (bubble tight)External: 0.016 sccm
Response: <30 msec cycling (2 Watts)Pressure:25 psig maximum (10 psid)
Vacuum: 0-20 in Hg
Power/Orifice Sizes:0.5 Watt/0.024"1.0 Watt/0.030"2.0 Watts/0.036"
Voltage:3 to 60 VDC
Electrical Terminal:PC Mount, Spade Lugs, 18” Wire Leads
Electrical Performance Characteristics
✦ Achieves rapid, stable performance.
✦ Enhances system control and patient comfort.
✦ Maintains ideal flow through Normally Open valve with thermal compensation.
✦ Extremely reliable.
Features
VSO is a registered trademark of Parker Hannifin Corporation.
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/US
VALVES
21Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
LONE WOLF
Dimensions
Ordering Information
Sample Part ID LW 1 B V A F 8
Description Series Model Number Material Elastomer Coil Resistance Electrical Interface Pneumatic Interface
A: 11 ohms F: Wire Leads, 18"-19" 0: Manifold Mount
B: 23 ohms P: PC Board Mount, 4 PC Pins
Options 1: 0-10 psi/0.024"/0.5 Watt C: 47 ohms
2: 0-20 psi/0.030"/1 Watt D: 68 ohms
F: 274 ohms8: 1/8" Barbs
1: Manifold Mount with
Screens* (this option
will affect price)
No: Pressure/Orifice*/Coil Wattage V: FKMB: Brass
*Median Effective Orifice
3: 0-25 psi/0.036"/2 Watt
NOTE: Please consult Parker Life Sciences for other considerations. For more detailed information, visit us
on the Web, or call and refer to Performance Spec. #790-002131-001 and Drawing #890-003079-001.
Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/USEPC
Electron
ic Pressu
re Control
VSO-EP
Valve Technology:
Thermally compensated proportional valve
Media:Non-corrosive gases
Operating Environment: 0 to 55°C
Storage Temperature: -40 to 55°C
Length: 2.25 in (57.15 mm)
Width: 2.25 in (57.15 mm)
Height: 1.25 in (31.75 mm)
Porting: 10-32 female ports
Physical Properties
VSO-EP™
The VSO-EP™ Electronic Pressure Control Unit converts a variable electrical control signal into a variable pneumatic output. Used to control critical pressure,the VSO-EP replaces manual regulators, needle valves, flow controllers, andbleed orifices, providing integral closed loop proportional control. This productuses Pneutronics’ patented VSO® proportional valve and offers significantimprovements over dual valve controllers. VSO-EP is used for carrier gas flowcontrol, microfluidic flow control, vacuum pump control, and for aspirate /dispense applications.
Electronic Pressure Control Unit
Pressure Ranges: 0-15 psig0-30 psig0-50 psig0-100 psig
Pressure Accuracy:+ 0.2% FS typical+ 1.5% FS max
Response: <15 msec(Response time to target pressureis output volume dependent)
Linearity:< +1.0% FS
Maximum Supply Pressure: 150% of pressure transducer rating
Power: 24 VDC + 10%
Input Control Signal:0-5 VDC standard4-20 mA available
Monitor Output Voltage:0-5 volts
Current Requirement:<150 mA
Electrical Connector:RJ-45
Electrical Performance Characteristics
✦ Offers silent operation.
✦ Ensures high accuracy and unparalleled resolution.
✦ Tested for long life.
✦ Offers internal closed loop control and external pressure sensor capability*.
✦ OEM application-specific configurations available.
*Accessories Required
Features
VSO is a registered trademark and VSO EP is a trademark of Parker Hannifin Corporation.
For more information, call us toll-free at 1-800-525-2857
Catalog PLS01-1001/USEPC
Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciencesRev 1.5
VSO-EP
Drawing
Ordering Information
Sample Part ID VSO-EP SC 0-5 0-100
Description Series Configuration Electrical Input Pneumatic Range
SC: Standard Pressure Controller 0-5: 0-5 VDC
AC: Head Pressure Controller
0-2, 5, 7, 15, 30, 50, 70, 100 (psi)
Options
NOTE: Please consult Parker Life Sciences for other considerations. For more
detailed information, visit us on the Web, or call and refer to Performance
Spec. #790-002202-001 and Drawing #890-003146-001.
CAT 5e Plug-in (RJ-45) Connector (included)
Signal RJ-45 Pin # Color
Main Power, 24 VDC 1 White w/ Orange
Input Control Signal, 0-5 VDC 2 Solid Orange
Monitor Signal Output, 0-5 VDC 3 White w/ Green
System Ground 4 Solid Blue
Custom configurations are available.Contact factory for details.
Configurations
Ele
ctro
nic
Pre
ssu
re C
ontr
ol
Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/USEPC
Electron
ic Pressu
re Control
VSO-EV
Valve Technology:
Thermally compensated proportional valve
Media:Non-corrosive gases
Operating Environment: 0 to 55°C
Storage Temperature: -40 to 55°C
Length: 2.25 in (57.15 mm)
Width: 2.25 in (57.15 mm)
Height: 1.25 in (31.75 mm)
Porting: 10-32 female ports
Physical Properties
VSO-EV™
The VSO-EV™ is a pressure controller specifically configured and optimized for vacuum pressure control. The VSO-EV converts a variable electrical control signal into a closed-loop, tightly regulated pneumatic output. Oftenused for aspirating liquid samples in gas-over-liquid flow control, as well asfor pipetting and dispensing nano-liter volumes, the VSO-EV offers users a choice of either an external transducer or an internal sensor to close thecontrol loop around critical system parameters. This EPC is well suited forhigh precision automated laboratory instruments, meeting the most stringentseparation and detection requirements.
Vacuum Control Module
Vacuum Ranges: 0-345 mBarCustom units available
Pressure Accuracy:+ 0.2% FS typical+ 1.5% FS max
Response: <15 msec(Response time to target pressureis output volume dependent)
Linearity:< +1.0% FS
Maximum Supply Pressure: 150% of pressure transducer rating
Power: 24 VDC + 10%
Input Control Signal:0-5 VDC standard4-20 mA available
Monitor Output Voltage:0-5 volts
Current Requirement:<150 mA
Electrical Connector:RJ-45
Electrical Performance Characteristics
✦ Low weight and low power consumption
✦ Ensures high accuracy and unparalleled resolution.
✦ Tested for long life.
✦ Offers internal closed loop control and external pressure sensor capability*.
✦ OEM application-specific configurations available.
*Accessories Required
Features
VSO is a registered trademark and VSO EV is a trademark of Parker Hannifin Corporation.
For more information, call us toll-free at 1-800-525-2857
Ele
ctro
nic
Pre
ssu
re C
ontr
ol
Catalog PLS01-1001/USEPC
Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences Rev 1.5
VSO-EV
Drawing
Ordering Information
Sample Part ID VSO-EV EV 0-5 0-VAC
Description Series Configuration Electrical Input Pneumatic Range
0-5: 0-5 VDC
Options
EV: Vacuum Controller 0-VAC: 0-VAC*
* 0 to -345 mBar for vacuum; Consult factory
for custom options
NOTE: Please consult Parker Life Sciences for other considerations. For more
detailed information, visit us on the Web, or call and refer to Performance
Spec. #790-002202-001 and Drawing #890-003146-001.
CAT 5e Plug-in (RJ-45) Connector (included)
Signal RJ-45 Pin # Color
Main Power, 24 VDC 1 White w/ Orange
Input Control Signal, 0-5 VDC 2 Solid Orange
Monitor Signal Output, 0-5 VDC 3 White w/ Green
System Ground 4 Solid Blue
Custom configurations are available.Contact factory for details.
Configurations
Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/USEPC
OEM-EP
Electron
ic Pressu
re Control
Miniature Pressure Control Module
OEM-EP
Valve Technology:
Thermally compensated proportional valve
Media:Non-corrosive gases
Operating Environment: 0 to 55°C
Storage Temperature: -40 to 55°C
Length: 1.02 in (26 mm)
Width: 1.06 in (27 mm)
Height: 2.36 in (60 mm)
Porting: 10-32 female ports
Physical Properties
Pressure Ranges: 0-15 psig0-30 psig0-50 psig0-100 psig
Pressure Accuracy:+ 0.2% FS typical+ 1.5% FS max
Response: <15 msec(Response time to target pressureis output volume dependent)
Linearity:< +1.0% FS
Maximum Supply Pressure: 150% of pressure transducer rating
Main Power: 24 VDC + 10%
Input Control Signal:0-5 VDC standard
Monitor Output Voltage:0-5 volts
Current Requirement:<150 mA
Electrical Connector:6 pin miniature interface cableincluded
Electrical Performance Characteristics
✦ Silent operation
✦ Long life
✦ High accuracy
✦ Low power consumption
✦ “Set and Forget” closed loop control
Features
Measuring just 26mm x 27mm x 60mm, the OEM-EP (Electronic PressureControl Unit) is the smallest electronic pressure controller available on themarket, configured specifically for the analytical instrumentation and life science OEM markets.
The OEM-EP can be configured to control pressure or flow and can replacemanual regulators, flow controllers, and needle valves, providing integralclosed loop proportional control for sensitive instrumentation applications.This product uses Parker's patented VSO® proportional valve, as well as theproven circuitry of its successful larger products.
Typical applications include:
✦ Carrier gas flow control ✦ Gas over liquid flow control
✦ Microfluidic flow control ✦ Liquid dispensing
✦ Hydro-dynamic focusing
For more information, call us toll-free at 1-800-525-2857
Catalog PLS01-1001/USEPC
Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences Rev 1.5
OEM-EP
Drawing
Ordering Information
Sample Part ID OEM-EP SC 0-5 0-100
Description Series Configuration Electrical Input Pneumatic Range
SC: Standard Pressure Configuration 0-5: 0-5 VDC 0-2, 5, 7, 15, 30, 50, 70, 100 (psi)
AC: Head Pressure Controller
Options
NOTE: Please consult Parker Life Sciences for other considerations.
For more detailed information, visit us on the Web.
Custom configurations are available.Contact factory for details.
Configurations
Ele
ctro
nic
Pre
ssu
re C
ontr
ol
Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/USEPC
VSO-GC
Electron
ic Pressu
re Control
Gas Chromatography Flow Control Module
VSO-GC
Valve Technology:
Thermally compensated proportional valve
Media:Non-corrosive gases
Operating Environment: 0 to 55°C
Storage Temperature: -40 to 55°C
Length: 2.25 in (57.15 mm)
Width: 2.25 in (57.15 mm)
Height: 1.25 in (31.75 mm)
Porting: 10-32 female ports
Physical Properties
Pressure Ranges: 0-15 psig0-30 psig0-50 psig0-100 psig
Pressure Accuracy:+ 0.2% FS typical+ 1.5% FS max
Response: <15 msec(Response time to target pressureis output volume dependent)
Linearity:< +1.0% FS
Maximum Supply Pressure: 150% of pressure transducer rating
Power: 24 VDC + 10%
Input Control Signal:0-5 VDC standard4-20 mA available
Monitor Output Voltage:0-5 volts
Current Requirement:<150 mA
Electrical Connector:RJ-45
Electrical Performance Characteristics
✦ Silent operation
✦ Long life
✦ High accuracy
✦ Unparalleled resolution
✦ GC-specific proportional valve
✦ Internal closed loop control
✦ Pressure signal output
Features
The VSO-GC, Electronic Pressure Control (EPC) Unit, converts a variable electrical control signal into a variable pneumatic output. By providing integralclosed loop control, it replaces manual regulators, costly multiple function control valves, and needle valves. This product uses Parker Hannifin's patentedVSOTM proportional valve and offers application-specific integrated pneumaticpressure control for Gas Chromatography (GC) applications.
Typical applications include:
✦ Column Head Pressure Control
✦ Split Flow Control
✦ Carrier Gas Flow Control
For more information, call us toll-free at 1-800-525-2857
Catalog PLS01-1001/USEPC
Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences Rev 1.5
VSO-GC
Drawing
Ordering Information
Sample Part ID VSO-GC AC 0-5 0-100*
Description Series Configuration Electrical Input Pneumatic Range
SF: Split Flow Controller 0-5: 0-5 VDC 0-2, 5, 7, 15, 30, 50, 70, 100 (psi)
AC: Head Pressure Controller
Options
* Not required for SF NOTE: Split Flow Controller
accommodates varying inlet pressures.
NOTE: Please consult Parker Life Sciences for other considerations.
For more detailed information, visit us on the Web.
CAT 5e Plug-in (RJ-45) Connector (included)
Signal RJ-45 Pin # Color
Main Power, 24 VDC 1 White w/ Orange
Input Control Signal, 0-5 VDC 2 Solid Orange
Monitor Signal Output, 0-5 VDC 3 White w/ Green
System Ground 4 Solid Blue
NOTE: Valve sizes are optimized for use in Gas Chromatography applications. Customs performance readily available; consult factory for options. CAT 5e cable included.
Schematic diagram of VSO-GC
VSO-GC Block Diagram Representation
Configurations
Ele
ctro
nic
Pre
ssu
re C
ontr
ol
Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/USEPC
VSO-HP
Electron
ic Pressu
re Control
High Performance Pressure Controller
VSO-HP
Valve Technology:
Thermally compensated proportional valve; digital dump valve
Media:Non-corrosive gases
Operating Environment: 0 to 55°C
Storage Temperature: -40 to 55°C
Length: 1.52 in (39 mm)
Width: 1.66 in (42 mm)
Height: 2.79 in (71 mm)
Porting: 10-32 female ports
Physical Properties
Pressure Ranges: 0-15 psig0-30 psig0-50 psig0-100 psig
Pressure Accuracy:+ 0.2% FS typical+ 1.0% FS max
Response: <15 msec(Response time to target pressureis output volume dependent)
Linearity:< +1.0% FS
Maximum Supply Pressure: 150% of pressure transducer rating
Main Power: 24 VDC + 10%
Input Control Signal:0-5 VDC standard
Monitor Output Voltage:0-5 volts
Current Requirement:<250 mA
Electrical Connector:6 pin miniature interface cableincluded
Electrical Performance Characteristics
✦ Stable pressure control with minimal thermal drift
✦ Rapid depressurization
✦ High accuracy; high repeatability
✦ Low power consumption
✦ Optional 5 VDC supply output
✦ Configurable for pressure controlor flow control
✦ External pressure sensor capability
✦ Silent operation; long life
Features
VSO is a registered trademark of Parker Hannifin Corporation.
Used in analytical and OEM instrument applications, the VSO-HP delivers integral closed loop proportional control with the highest level of accuracy and stability. This miniature controller, measuring only 39 x 42 x 71mm, worksideally in High Performance Liquid Chromatography (HPLC) applications, eliminating time-consuming temperature and pressure adjustments throughits superior design and performance.
The VSO-HP ensures stable flow levels with features such as monitor voltagefeedback and an LED display for pressure regulation. It also offers rapiddepressurization, which results in a fast response time and has an optionalexternal sensor for expertly controlling pressure in required applications.
The VSO-HP can be configured to control pressure or flow, replacing manualregulators, flow controllers, and needle valves. This product uses Parker'spatented VSO® proportional valve and offers precise motion control withParker pneumatic cylinders, such as the Series SRX.
Typical applications include:
✦ Carrier gas flow control ✦ Gas over liquid flow control
✦ Hydro-dynamic focusing ✦ Microfluidic flow control
✦ Liquid dispensing
For more information, call us toll-free at 1-800-525-2857
Catalog PLS01-1001/USEPC
Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences Rev 1.5
VSO-HP
Drawing
Ordering Information
Sample Part ID VSO-HP SC 0-5 0-100
Description Series Configuration Electrical Input Pneumatic Range
SC: Standard Pressure Controller 0-5: 0-5 VDC 0-2, 5, 7, 15, 30, 50, 70, 100 (psi)
AC: Head Pressure Controller
Options
NOTE: Please consult Parker Life Sciences for other considerations.
For more detailed information, visit us on the Web.
VSOValve
Application
PressureSensor
0-5 VDC pressuremonitor output
S-11Valve
atm
BleedOrifice
Custom configurations are available.Contact factory for details.
Configurations
Ele
ctro
nic
Pre
ssu
re C
ontr
ol
Valve Type:
2-Way Normally Open
Media:Non-corrosive gases
Operating Environment: 0 to 45°C
Storage Temperature: -25 to 70°C
Length: 1.01 in (25.6 mm)
Width: 0.394 in (10 mm)
Height: 0.472 in (12 mm)
Porting: 1 port, 0.118" (3 mm) O.D.; suitablefor 0.078 I.D.; Urethane tubing
Weight: .27 oz (7.71 grams)
Internal Volume: 0.026 cm3
Filtration:None required
Lubrication: None required
Physical Properties
The PND Series is a miniature, low cost, application-specific, two-wayNormally Open exhaust or "dump" valve. Perfect for safety-oriented applications that require pressure relief to atmosphere upon power loss.
Leak Rate: 0.016 sccm (bubble tight)
Response: <100 msec cyclingPressure:0 to 6 psig holding
Vacuum: 0-27 in Hg
Orifice Sizes/Equivalent Cv:0.030"/0.017 Cv0.050"/0.035 CvLarger sizes available in 15 mm frame
Elastomer:Silicon; Nickel-Plated Steel
Frame:SPCC (Treatment: MFZn2-c)
All Other:Polybutylene Terephthalate (PBT);304 Series Stainless Steel
Power: 0.5 Watt or less
Voltage:3, 6, 12 VDC
Electrical
Wetted Materials
Performance Characteristics
Sample Part ID PND _ 05 A _ 12
Description Series _ Watts (RatedPower at 20°C)
Orifice Size _ Voltage
05: 0.5 Watt D: 0.030" 03: 3 VDC
A: 0.050" 06: 6 VDC
Options 12: 12 VDC
Note: With Orifice Size at 0.050", the frame width and height increases 0.118" (3mm)
✦ Normally Open exhaust valve in a small package size.
✦ Works well in miniature applications such as in Non-Invasive BloodPressure (NIBP) devices.
✦ Provides small size and low cost.
✦ Offers low holding voltage.
Features
NOTE: Please consult Parker Life Sciences for other considerations.
For more detailed information, visit us on the Web, or call and refer to
Performance Spec. #790-002198-001 and Drawing #s: PND-05A-DWG
and PND-05D-DWG.
Ordering Information
24Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/US
VALVES PND
Pneutronics New Dump ValveMin
iature V
alves
PND Series
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/US
VALVES
25Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
PND
Dimensions
Valve Type:
Normally OpenNormally Closed
Pipe Size: 1/8" NPT
Orifice Diameters:Normally Open1/32", 3/64", 3/32"
Normally Closed1/32", 3/64", 1/16", 1/8"
Valve Diameter: 1 in (25.4 mm)
Height: 2.69 in (68.33mm)
Weight: 4.8 oz (137.14 grams)
Maximum Ambient Temperature105°F
Universal Mounting Bracket: B19006
Filtration:40 micron recommended
Lubrication: None required, but will increase life
Compatible Fluids:Lubricated air, non-lubricated air,inert gases, water, hydraulic fluids,petroleum products, and additionalfluids compatible with materials ofconstruction
Operating Speed: Up to 600 cycles per minute
Vacuum: Up to 5 micron
Physical Properties
Power Consumption: 7 Watts
Voltage:DC: 12, 24 AC: 24/60, 120/60, 240/60
Other voltages available uponrequest Coil Type:Class A
Electrical Standard Material Options
Performance Characteristics
The small stainless steel B Series valves convert electrical signal to controlmedia flow. Available as Normally Closed (B2) and Normally Open (B11), thesebubble tight valves are 100% tested and will perform consistently for up to 20 million cycles.
Body: Series 303 Stainless Steel
Seals: NBR (Nitrile), FKM
Sleeve: Series 304 Stainless Steel
Plunger: 430F FR Stainless Steel
Stop: 430 FR Stainless Steel
Springs: Stainless Steel (18-8)
Shading Ring: Copper (AC only)
Orifice: Series 303 Stainless Steel
✦ Multipoised; available in a range of mounting positions.
✦ Rated pressures up to 400 psi allow maximum control over gases and liquids.
✦ Available with 1/8" NPT ports for process connection and 18" lead wires forelectrical connection.
Features
26Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/US
VALVES
Min
iature V
alves
B SERIES
Configurations
General Purpose 2-Way Direct Acting Valves
B Series
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/US
VALVES
27Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
B SERIES
Ordering Information
Sample Part ID B2 DA 1400
Description Series Coil Enclosure Max. Operating Pressure
B2 B2
DA: Grommet 1400: 400 psi (AC/DC)
Options 1250: 250 psi (AC/DC)
B11 1175: 175 psi (AC/DC)
DK: Grommet 1052: 50 psi (AC)
1026: 25 psi (DC)
B11
1400: 400 psi (AC/DC)
1200: 200 psi (AC/DC)
1040: 40 psi (AC/DC)
B2: 2-Way, Normally Closed,
NBR Seals
B11: 2-Way, Normally Open,
FKM Seals
NOTE: Please consult Parker Life Sciences for other considerations.
*When ordering, please state voltage.
Example: B2DA1250, 24 VDC
Dimensions
NOTE: Universal Mounting Bracket B19006,shown above, is a separately ordered item.
28Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/US
VALVES
Min
iature V
alves
B SERIES
B SeriesGeneral Purpose 3-Way Solenoid Valve
Valve Type:
Normally Open, Normally Closed,Normally Closed - Exhaust toAtmosphere, Directional Control,Multipurpose
Pipe Size: 1/8" NPT
Orifice Diameters:1/32", 3/64", 1/16", 3/32"
Valve Diameter: 1 in (25.4 mm)
Height: 2.26 in (57.4 mm)
Weight: 4.8 oz (137.14 grams)
Maximum Ambient Temperature105°F
Universal Mounting Bracket: B19006
Filtration:40 micron recommended
Lubrication: None required, but will increase life
Compatible Fluids:Lubricated air, non-lubricated air,inert gases, water, hydraulic fluids,petroleum products, and additionalfluids compatible with materials ofconstruction
Physical Properties
The three-way B Series valves are available in several configurations, includ-ing Normally Closed and Normally Closed-Exhaust to Atmosphere (B13 andB13A), Multipurpose (B14), Normally Open (B15), and Directional Control (B16).
Operating Speed: Up to 600 cycles per minute
Vacuum: Up to 5 micron
Power Consumption: 7 Watts
Voltage:DC: 12, 24 AC: 24/60, 120/60, 240/60
Other voltages available uponrequestCoil Type:Class B
Electrical Standard Material Options
Performance Characteristics
Body: Series 303 Stainless Steel
Seals: NBR, FKM
Sleeve: Series 304 Stainless Steel
Plunger: 430F FR Stainless Steel
Stop: 430 FR Stainless Steel
Springs: Stainless Steel (18-8)
Shading Ring: Copper (AC only)
Orifice: Series 303 Stainless Steel
✦ Stainless steel body with high flow capacity.
✦ Available with 1/8" NPT ports.
✦ Can be used as two-way Normally Open or Normally Closed by pluggingone port.
✦ Multipurpose valves accept inlet pressure or vacuum at any port.
✦ Multipoised; available in a range of mounting positions.
Features
Configurations
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/US
VALVES
29Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
B SERIES
Ordering Information
Sample Part ID B13 DK 1175
Description Series Coil Enclosure Max. Operating Pressure
B13: 3-Way, Normally Closed (NC) DK: Grommet B13 & B13A
1200: 200 psi (AC/DC)
Options 1150: 150 psi (AC/DC)
B14: 3-Way, Multipurpose 1100: 100 psi (AC/DC)
B15: 3-Way, Normally Open 1040: 40 psi (AC/DC)
B16: 3-Way, Directional Control B14
1150: 150 psi (AC/DC)
1100: 100 psi (AC/DC)
1075: 75 psi (AC)
1030: 30 psi (DC)
B15
1200: 200 psi (AC/DC)
1150: 150 psi (AC/DC)
1125: 125 psi (AC/DC)
1040: 40 psi (AC/DC)
B16
1250: 250 psi (AC/DC)
1200: 200 psi (AC/DC)
1175: 175 psi (AC/DC)
1050: 50 psi (AC/DC)
B13A: 3-Way, NC, exhaust to
atmosphere
NOTE: Please consult Parker Life
Sciences for other considerations.
*When ordering, please state voltage.
Example: B13DK1175, 120/60
Dimensions
30Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/US
VALVES
Valve Type:
2-Way Normally Closed
Pipe Size: 1/8" NPT dry seal
Orifice Diameters:1/16", 7/64", 1/8", 5/32"
Valve Diameter: 1.19 in (30.23 mm)
Height: 2.31 in (58.67 mm)
Weight: 12 oz with Conduit (342.86 grams)11 oz with Grommet (314.29 grams)
Maximum Ambient Temperature105°F
Universal Mounting Bracket: MECHB5
Filtration:40 micron recommended
Lubrication: None required, but will increase life
Compatible Fluids:Lubricated air, non-lubricated air, inertgases, water, hydraulic fluids, petroleumproducts, Freon®, and additional fluidscompatible with materials of construction
Water over 180°F, Freon®, and some petroleum products may require sealmaterial modifications.
Physical Properties
C SeriesThe two-way Normally Closed C Series valves offer a soft synthetic plungerinsert with a precision-machined seat, which provides a tight seal with longinsert life. These valves are 100% tested and will perform consistently up to 20 million cycles.
Min
iature V
alves
General Purpose 2-Way Direct Acting Valves
C SERIES
Operating Speed: Up to 600 cycles per minute
Response Time: AC: 4-8 msec to open or closeDC: 10-15 msec to open or close
Vacuum: Down to 5 microns(0.005 Torr, 2 x 10-4 in Hg)
Maximum Operating PressureDifferentialUp to 275 psi
Power Consumption: 8 Watts
Voltage:DC: 12, 24 AC: 24/60, 120/60, 240/60
Other voltages available uponrequest Coil Enclosures:Grommet; 1/2” NPT Conduit
Electrical
Standard Material Options
Performance Characteristics
Body: Brass (Stainless Steel available)
Seals: NBR (FKM, and EPDM available upon request)
Sleeve: Series 304 Stainless Steel
Plunger: 430F FR Stainless Steel
Stop: 430 FR Stainless Steel
Springs: Stainless Steel (18-8)
Shading Ring: Copper (AC only)
✦ Includes only two moving parts: the stainless steel spring and the plunger.
✦ Range of compatible media includes petroleum products and Freon®.
✦ Up to 275 psi of operating pressure.
✦ Measures 2 5/16" in height and 12 oz in weight.
✦ Valves are UL/CSA approved for all AC voltages with 1/2" conduit enclosure.
✦ Multipoised; available in a range of mounting positions.
Features
Configurations
Freon® is a registered trademark of E.I. du Pont de Nemours and Company.
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/US
VALVES
31Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
C SERIES
Dimensions
Sample Part ID C2 DA 1277
Description Series Coil Enclosure Max. Operating Pressure
DA: Grommet 1277: 275 psi (AC)
DB: 1/2" Conduit 1251: 250 psi (DC)
Options 1132: 130 psi (AC)
1081: 81 psi (DC)
1092: 90 psi (AC)
1051: 50 psi (DC)
1062: 60 psi (AC)
1031: 30 psi (DC)
C2: 2-Way, Normally Closed
NOTE: Please consult Parker Life Sciences for other considerations.
*When ordering, please state voltage.
Example: C2DA1277, 12 vdc
Ordering Information
NOTE: Universal Mounting Bracket MECHB5,shown left, is a separately ordered item.
Valve Type:
Normally Open, Normally Closed,Normally Closed - Exhaust toAtmosphere, Multipurpose
Pipe Size: Body Ports 1/8" NPTAdapter 1/8" PTF
Orifice Diameters:1/16", 7/64", 1/8", 5/32"
Valve Diameter: 1.19 in (30.23 mm)
Height: 3.30 in (83.82 mm)
Filtration:40 micron recommended
Lubrication: None required, but will increase life
Compatible Fluids:Lubricated air, non-lubricated air,inert gases, water, hydraulic fluids,petroleum products, and additionalfluids compatible with materials ofconstruction
Physical Properties
The three-way C Series valves, including C3 & C3A (Normally Closed andNormally Closed-Exhaust to Atmosphere), C4 (Multipurpose) and C5(Normally Open) convert electrical signal to controlled media flow. Thesebrass valves are available with 1/8" NPT ports for media connection and 18" lead wires for electrical connection.
Operating Speed: Up to 600 cycles per minute
Vacuum: Down to 5 microns
Maximum Operating PressureDifferentialUp to 175 psi
Power Consumption: 7.5 Watts
Voltage:DC: 12, 24AC: 24/60, 120/60, 240/60
Other voltages available uponrequest
Electrical Standard Material Options
Performance Characteristics
Body: Brass
Sleeve: Series 300 Stainless Steel
Plunger: 430F FR Stainless Steel
Seals: NBR and FKM
✦ Accommodates up to 175 psi of system pressure depending on flow requirements.
✦ Tested to perform consistently for up to 20 million cycles.
✦ Valves are UL/CSA approved for all AC voltages with 1/2" conduit enclosure.
✦ Multipoised; available in a range of mounting positions.
Features
32Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/US
VALVES
Min
iature V
alves
C SERIES
Configurations
General Purpose 3-Way Direct Acting Valve
C Series
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/US
VALVES
33Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
C SERIES
Dimensions
Ordering Information
Sample Part ID C3 DK 1175
Description Series Coil Enclosure Max. Operating Pressure
C3: 3-Way, Normally Closed (NC) DK: Grommet C3 & C3A
1175: 175 psi (AC/DC)
Options 1125: 125 psi (AC/DC)
C4: 3-Way, Multipurpose 1075: 75 psi (AC/DC)
C5: 3-Way, Normally Open 1050: 50 psi (AC/DC)
C4
1150: 150 psi (AC/DC)
1075: 75 psi (AC/DC)
1050: 50 psi (AC)
1031: 30 psi (DC)
C5
1175: 175 psi (AC/DC)
1100: 100 psi (AC/DC)
1060: 60 psi (AC/DC)
C3A: 3-Way, NC, exhaust to
atmosphere
DM: 1/2" NPT Conduit
NOTE: Please consult Parker Life Sciences for other considerations.
*When ordering, please state voltage.
Example: C3DK1175, 12 vdc
Valve Type:
2-Way: Normally Open, Normally Closed
3-Way: Normally Open, Normally Closed,Multipurpose, Directional Control
Orifice Diameters:Normally Open1/32", 3/64", 1/16", 5/64", 3/32"
Normally Closed1/32", 3/64", 1/16", 5/64", 3/32", 1/8", 5/32"
Valve Diameter: 1.02 in (25.91 mm)
Height: 2.08 in (52.83)
Weight: 8 oz (228.57 grams)
Maximum Ambient Temperature68°F for continuous duty cycle
Mounting:Standard: Two 8-32 tapped holes in bottom of valve
Optional: Universal mounting bracketB19006 is available
Process Connections:1/8" NPTManifold mount: cavity, screw-in
Filtration:40 micron
Lubrication: None required, but will increase life
Compatible Fluids:Air, Inert Gas, Water, Oil
Physical Properties
The 3000 Series two-way and three-way valves convert electrical signal tocontrol media flow. Available as Normally Open (Series 3121) or NormallyClosed (Series 3129), these small stainless steel or brass bubble tightvalves will perform consistently for up to 20 million cycles.
Operating Speed: Up to 600 cycles per minuteContinuous Duty
Response Time: 8-16 msec to open or close
Vacuum: Down to 5 microns depending on application
Power Consumption: 6 Watts7.5 Watts for 24/603 Watts
Voltage:DC: 12, 24 AC: 24/60-24/50, 110/50-120/60,220/50-240/60
3-Way Connections:12" leads; 1/4"tab
3-Way Coil Enclosure Options:1/2" Conduit; Grommet; Yoke;Integrated with tab connection;Integrated with 12" leads
Electrical Standard Material Options
Performance Characteristics
Body: Brass or Series 303 StainlessSteel
Seals: NBR, FKM, EPDM
Sleeve: Series 300 Stainless Steel
Plunger: 430F FR Stainless Steel
Manifold Body: Aluminum
Flux Plate: Plated Steel
Housing: Plated Steel
Integrated Coil Encapsulant: Nylon
✦ 2-Way: Rated for 800 psi for gases and liquids.
3-Way: Rated for 200 psi for gases and liquids.
✦ Available with 1/8" NPT ports or manifold mount for process connectionand either lead wires or tabs for electrical connection.
✦ UL and CSA component recognition.
✦ Multipoised; available in a range of mounting positions.
Features
34Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/US
VALVES
Min
iature V
alves
3000 SERIES
3-Way Configurations
3000 Series2-Way & 3-Way Direct Acting Valves
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/US
VALVES
35Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
3000 SERIES
Ordering Information
Sample Part ID 3 1 2 1 B B N1 A
Description Series Operations Type Flow Pattern Family Body Material(Pipe Size)
Orifice
3000 2: 2-Way 1: Normally Closed B B: Brass (1/8” NPT only) A: 1/32"
3: 3-Way 3: Multipurpose J: Operator (No Body)(5/16"- 24 UNF) E: 3/64"
Options 8: Directional S: 303 Stainless Steel(3/4"-32 UNF)
G: 1/16"
J: 5/64"
N: 1/8"
Q: 5/32"
9: Normally Open,
Ported Sleeve
A6: Male Straight Thread
N11: Female National Pipe
1/8”
1: Direct Acting,
6 Watt
9: Direct Acting,
3 Watt
L: 3/32"
A7: Male Straight Thread
(1/8” NPT only)
Process Connection
_ E 00 NO M1S1 P0
_ Seal Material Mechanical Option Housing Coil Voltage
00: None P0: 24/50-60 Hz ACE: EPDM
N: NBR
V: FKMRR: Grommet
YY: Yoke
C1: 12 VDC
C2: 24 VDC
NOTE: For all 6W coils,
actual wattage for 24/60
Voltage is 7.5
N0: Cleaned for
Oxygen Service
HT: Helium Leak
Tested
T1J1: Taped 12" Leads, 6W,
Class B
T3J1: Taped 12" Leads, 3W,
Class B
AD: 1/8" NPT
Sleeve Adapter
(3-Way Only)
C#: Aluminum,
Female 1/8" NPT,
2, 3, or 4 Station
Cavity Manifold
Block
N0: No Housing
(Integrated Coil
Only)
M1S1: Integrated Molded,
1/4" Tab, 6W, Class B
M3J5: Integrated Molded,
12" Leads, 6W, Class B
M6J5: Integrated Molded,
12" Leads, 3W, Class B
Q3: 220/50 Hz,
240/60 Hz AC
P3: 110/50 Hz,
120/60 Hz AC
(Taped Coil Only)
(Taped Coil Only)
Series 3000 Part ID Continued(20 characters total)
NOTE: Please consult Parker Life
Sciences for other considerations.
2-Way Configurations Dimensions
Valve Type:
2-Way, Normally Closed proportional
Orifice Diameters:1/32", 3/64", 1/16", 5/64", 3/32"
Media:All gases compatible with valve materials
Operating Environment: Ambient: 14 to 122°F (-10 to 55°C)
Media: 0 to 180°F (-18 to 82°C)
Length: 3.31 in (84 mm)
Width: 1.38 in (35 mm)
Height: 1.79 in (45.5 mm)
Porting: 1/8" NPT
Physical Properties
The BP Series valve is an analog proportional device that digitally modulates the current supplied to the coil. The mechanism that opens and closes the BPvalve's flow orifice moves in a linear manner in response to the varying coil current and is easily controlled by a user input signal.
Flow
Response: Complete cycle, Off-Full, Open-Off:
40 msec cycling at zero pressure100 msec cycling at max pressure
Hysteresis:10% of full flow (in open loop
applications)
Valve Repeatability: 5% when operating within LinearControl Range
Valve Orientation:Multipoised: can be mounted in any position
Power: 7 Watts maximum
Voltage:12-24 VDC
Enclosure:General Purpose, NEMA 1
Coil Type:Class A
Electrical Performance Characteristics
Standard Material Options
Body: Stainless Steel
Seals: NBR, FKM
Sleeve: Stainless Steel
Plunger: Stainless Steel
Stop: Stainless Steel
Springs: Stainless Steel
Orifice: Stainless Steel
✦ Offers longer valve life and consumes less power than similar proportional valves.
✦ Eliminates pressure or flow spikes by using linear flow control.
✦ Provides faster response time.
✦ Offers simplified control systems.
✦ Versatile: multipoised valves allow mounting in any position.
Features
36Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/US
VALVES
Min
iature V
alves
BP SERIES
Proportional 2-Way Valves
BP Series
BP Proportional Valve Flow Curve
% Control Signal(X)
LinearControl
Range(Y)
Zero Offset Point (point where flow begins)
typically between 30-40% ofcontrol signal, depending on
actual system pressure
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/US
VALVES
37Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
BP SERIES
Dimensions
Ordering Information
Sample Part ID
Description Series Orifice Size C Max. Operating Pressure
External Control
BP Flow at Maximum psi Flow at 10 psi 0-2V 0-5V 0-10V 4-20mA
1/32” 0.02 200 psi 0-50,000 sccm 0-8,000 sccm BP2EV0001 BP2EV0012 BP2EV0013 BP2EV0029 BP2DA1201
3/64” 0.045 100 psi 0-65,000 sccm 0-17,000 sccm BP2EV0002 BP2EV0010 BP2EV0011 BP2EV0024 BP2DA1101
Options 1/16” 0.08 60 psi 0-75,000 sccm 0-30,000 sccm BP2EV0003 BP2EV0005 BP2EV0009 BP2EV0020 BP2DA1061
5/64” 0.12 40 psi 0-80,000 sccm 0-45,000 sccm BP2EV0004 BP2EV0006 BP2EV0008 BP2EV0014 BP2DA1041
3/32” 0.16 25 psi BP2DA1026Consult Factory
BP2EV0001
Flow Ranges Control Input Signal ORv
NOTE: External control valves do not include electronics in valve number (only the coil is provided).
Please consult Parker Life Sciences for other considerations.
38Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
Catalog PLS01-1001/US
VALVES
Value Added
Min
iature V
alves
Value-Added Products
MANIFOLDS
✦ Mixed pneumaticlogic assembly
✦ Pressed in barbedfittings
5 Position SRS ModelPneumatic Manifold
✦ Mixed pneumaticlogic design
✦ Ultra-miniaturedesign with PCB for mass termination
10 Position X-Valve®
Pneumatic Manifold
✦ Mixed gassinglogic designincludes VSO®
proportionalvalves, X-Valve®,pressure switch,pressure sensors,and PCB interface
Gassing Control System
✦ Mixed pneumaticlogic assembly
✦ Integrated pressuresensors
✦ Mass termination ofsensors & valves
✦ Pressed in barbedfittings
5 Position SRS ModelPneumatic Manifold
✦ Tested to 1 x 10-7
cc/sec/atm Helium
✦ Assembly testedon mass spectrometer
Vacuum Gas Control Module
✦ Integrated circuitboard
✦ Mass electricaltermination
✦ Splash-proof vinylhood
14 Position X-Valve®
Pneumatic Manifold
VSO and X-Valve are registered trademarks of Parker Hannifin Corporation.
For more information, call us toll-free at 1-800-525-2857
Min
iatu
re V
alve
s
Catalog PLS01-1001/US
VALVES
39Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences
MANIFOLDS
✦ Low cost solution
4 Position V2 Pneumatic Manifold
✦ Circuit board withmass electrical termination
✦ Multiple layermanifold
✦ Integrated volumechambers
23 Station/Multiple ValvePneumatic Manifold
✦ Integrated pressure/vacuum sensors
✦ Mixed pneumaticlogic design
✦ Ultem® manifoldpressure/vacuumsensors
7 Position X-Valve®
Pneumatic Manifold
✦ Quick connect fittings
✦ Circuit board withmass electricaltermination
6 Position VSO® Proportional ValvePneumatic Manifold Assembly
✦ Integrated circuitboard mounting
✦ Mass electricaltermination
8 Position SRS ModelPneumatic Manifold
✦ Circuit board withtransducers
✦ Pressed in barbedfittings
10 Position SRS ModelPneumatic Manifold
Ultem® is a registered trademark of General Electric Company.
FOR OTHER MANIFOLD TECHNOLOGY OPTIONS, PLEASE CONTACT PARKER LIFE SCIENCES TODAY!