dovetail brackets and mounting plates - mecmesin€¦ · dovetail brackets and mounting plates...
TRANSCRIPT
www.mecmesin.com
DS-
1122
-01
Dovetail Brackets and Mounting Plates
DescriptionThe dovetail bracket is used for mounting a Mecmesin Advanced Force Gauge (AFG) or Basic Force Gauge (BFG) to the crosshead of manual and motorised test stands, to allow precise lateral alignment of the gauge. Supplied with socket-head fixing screws M5 x 12 mm.
The extended dovetail bracket is used for mounting a Mecmesin Advanced Force Gauge (AFG) or Basic Force Gauge (BFG) to the crosshead of manual and motorised test stands, to allow precise lateral alignment of the gauge. The extended length provides 70 mm (2.76") of extra daylight. Supplied socket-head fixing screws M5x10 mm.
This mounting plate allows a Mecmesin Compact Force Gauge+ (CFG+) to be mounted onto the crosshead of a test stand. Supplied with 4 x M3 fixing screws.
Specifications
www.mecmesin.com
Part No. Height Width
432-326 150 mm 5.91” 25 mm 0.98"
432-427 80 mm 3.15" 25 mm 0.98"
432-131 52.5 mm 2.07” 56 mm 2.2"
432-427 Dovetail bracket 432-326 Extended dovetail bracket 432-131 CFG+ Mounting plate
North America Mecmesin Corporation
w: www.mecmesincorp.come: [email protected]
China Mecmesin (Shanghai) Pte Ltd
w: www.mecmesin.cne: [email protected]
France Mecmesin France
w: www.mecmesin.fre: [email protected]
Germany Mecmesin GmbH
w: www.mecmesin.dee: [email protected]
Asia Mecmesin Asia Co., Ltd
w: www.mecmesinasia.come: [email protected]
Head Office Mecmesin Limited
w: www.mecmesin.come: [email protected]
Mecmesin reserves the right to alter equipment specifications without prior notice. E&OE
DISTRIBUTOR STAMP
www.mecmesin.com
t e s t i n g t o p e r f e c t i o n
DS-
1123
-01
Dimensions mm (inch)
2:1 @ A3
432-427 Dovetail Bracket
ALL DIMENSIONS ARE IN MILLIMETRESFOLLOWED BY INCHES: MM ( IN" )
57 2,25"
28 1,121"
80 3,15"
40,1
57"
60°9,5
0,374
"
5 0,197"O
9 0,354"O
1.5:1 @ A3
432-326 EXTENDED DOVETAIL BRACKET
ALL DIMENSIONS ARE IN MILLIMETRESFOLLOWED BY INCHES: MM ( IN" )
60°
57 2,25" 57 2,25"
250,9
84"
28 1,11"O 5 0,197"
150 5,906"
9,50,3
74"
432-326
432-427
432-1312:1 @ A3
432-131 Compact Gauge Mounting Plate
ALL DIMENSIONS ARE IN MILLIMETRESFOLLOWED BY INCHES: MM ( IN" )
52,5
2,067
"
56 2,2"
90,3
54"
4x THREAD 1
401,5
75"
28 1,102" 8 0,315"
60°
281,1
1"
321,2
58"