8/14/2019 HydroNex Per-Piped Mixing Radiant Panels Brochure
http://slidepdf.com/reader/full/hydronex-per-piped-mixing-radiant-panels-brochure 1/2
– wth autol– with autoll – wth autol and reset– with autolland reset – wth manua l– with manualll – wthmanual and reset– withmanuallland reset
– Drect (nomixing)– Direct (nomixing) – DMx– DMix – DMx Hybrd– DMix Hybrid high emp/DHW and mixed emp)(high temp/DHW and mixed temp)
– DVIP (injection mixing)– DVIP (injection mixing) – DVIP Hybrd– DVIP Hybrid(high temp/DHW and mixed temp)
– Heat exchangersnowmelt– Heat exchangersnowmelt
– Zone Drect (wth actuators)– Zone Direct (with actuators) – Zone Pump(wth actuators)– Zone Pump(with actuators) – Zone Mx Pump(wth actuators)– Zone Mix Pump(with actuators)
Z-Seriespanelsareavailablewith orwithout actuators.
An optionalpressuredifferentialby-passvalveisavailablefor allZ-Panelswith actuators.
Open, single layer construction design meanseasy access to all major components.
Modular design provides a uniqueability to customize any project.
–DVIP Injection w thZone Vaves–DVIP Injection withZone Valves
– Condensing boilerpanel with zone valves
Quick installation with little to nolearning curve required. Large 1-1/4” main trunk line allows for
applications with loads up to 200 MBH.
Designed for manual mixing, injection mixing, withcirculators, or with zone valves. HydroNex has theright module for nearly every application.
All components are pre-wired and tested.CAT-5 cable connects one panel to the next.
S P E C I A L
USA:WattsRadiant | 4500E. ProgressPlace | Springeld,MO 65803ph:417.864.6108 800.276.2419fax:417.864.8161 | www.wattsradiant.com
©WattsRadiant Lit#:06-349-1526-57-02 EffectiveDate:5/1/07
Canada: 5435North ServiceRoad | Burlington,ONT L7L-5H7ph:905.332.4090 888.208.8927fax: 905.332.7068 888.882.1979 | www.wattscanada.ca
Powder coated coversprovide a clean appearancewhile protecting majormechanical components.
– Geotherma panel– Geothermalpanel
Z-Brackets and QuickMount railmakes mounting and levelingquick, safe, and easy.
8/14/2019 HydroNex Per-Piped Mixing Radiant Panels Brochure
http://slidepdf.com/reader/full/hydronex-per-piped-mixing-radiant-panels-brochure 2/2
Why HydroNex?• Fast installation
– Cut installation time and make more money!• Simplify bids with xed costs• Easy maintenance• Factory assembled and tested
– HydroNex panels are guaranteedto perform
• Professional presentation• Performance engineered• Plug-n-play CAT5 electrical connectors
– Reduce wiring and start up problems• Multiple panel congurations• Proper piping and component placement• Convenient purge assemblies & control valves
P-SeriesPrimary panels circulate water through boilers,remove air and provide essential service andmonitoring. Options include boiler reset controlsand auto-ll assemblies.
D-SeriesDistribution panels send water to the point ofuse. They provide temperatures that are high,mixed or variable mixed. They service up to vezones per board and can be linked together forlarger projects.
S-SeriesSpecial Interest panels are designed for uniqueapplications, such as geothermal or condensingheat sources. S-Series panels can be usedindependently or with other HydroNex panels,depending on the panel in question.
Z-SeriesZone Panels include stainless steel manifolds todistribute water to radiant circuits or otherequipment. They provide temperatures that arehigh or mixed and are designed to be located in thezones they serve.
HydroNex panels are the perfect solution f or any radiantproject: oor warming, heating, or snowmelting. Pre-piped,pre-wired, and factory tested with a professionallooking enclosure, these panels will dramatically reduceinstallation times as well as virtually eliminate wiring and
other start-up problems.
Each panel comes pre-wired with a 120 volt powercord . Simply plug the HydroNex panel(s) into a standardwall outlet.
Electrical connections are even easier with the CAT5connection system . Control logic passes between panelsthough a CAT5 cable, enabling each panel to “talk” to each
other. The only wiring required is to connectthe zone thermostats to the correspondingrelay terminal.
Connecting one panel to another is as easy
as turning the hex nut on the brass o-ringseal union . Each union can withhold up to 100psi when only hand tightened.
The unique Z-Bracket hanging system allows panels to be installed without the hazardof trying to hold the panel while mounting.Simply install the Z-Bracket on a wall and hangthe HydroNex panel. That’s it!
Best of all, each HydroNex paneleasy system maintenance. Each the HydroNex panel can be easilyand isolated with numerous shutlocated on all panels.
Finally, each HydroNex comes wwhite, powder coated cover to perfect nished look.
So, don’t let your next radiant proyou down. HydroNex is fast, easy,guaranteed to take the mystery outhe mechanical room.
15
14
16
1817
19
21
23
22
26
27
28
20
24
2513
3
1
11
10
9
5
6
8
7
4
2
32
12
