duzina gibljivog creva - stainless_steel_catalogue.pdf

7/24/2019 DUZINA GIBLJIVOG CREVA - Stainless_Steel_Catalogue.pdf

1/14

6

7

STA INLE SS STE EL

C O R R U G A T E D H O S E& S T R I P W O U N DP r o d u c t G u i d e

0 2


2/14

STAINLESSSTELLHOSE

1

2

3

4

5

STAINLESS STEEL HOSE STAINLESS STEEL HOSE

6

7

Pacific Hoseflex2.02COMPANY PROFILE

2.03 Complete Range of Pacific Hoseflex

STAINLESSSTELLHOSE

1

2

3

4

5

PRODUCT RANGE

Pacific Hoseflex is the industry leader in engineering fluid transfer products. The Privately owned company has a largemanufacturing facility on the South East side of Queensland spanning over 1.5 acres with a capacity to distributethroughout Australia. The modern manufacturing facility has a quality range of products and services covering allindustries. Pacific Hoseflex guarantees they have the resources to meet any customer demands.

Over the past 30 years Pacific Hoseflex has built their reputation by achieving mile stones with the completion of manymajor projects internationally. Our highly qualified technicians, supported with extensive research and development ofproducts has given the company a competitive advantage when tendering within the industry.

Committed and dedicated to providing superior quality which incorporates continuous improvement to procedures andmanufacturing practices to achieve our certified quality management system with includes:

- Third Party Certified to ISO 9001:2008- Welding Standard AS 4041 (Class 1)- AGA Approved Stainless Steel and Rubber Hose Assemblies

- Department of Transportation (DOT) Brake Lines Approved: FMV SS106To ensure our client receives the highest quality, each product is 100% tested and meticulously inspected by adedicated quality control position. We pride ourselves in providing excellent customer service to all clients. PacificHoseflex provides a fast and reliable turnaround time and will assist in emergency breakdown situations. With a wealthof knowledge and expertise, Pacific Hoseflex can assist you with any technical information required as well as offering acompany representation service for onsite support. Pacific Hoseflex has the capacity to meet the requirements of majorprojects, including engineering design and specification.

Pacific Hoseflex offers a hose management system to trace and maintain all products supplied by Pacific Hoseflex whichcan be customized to suit individual client needs.

For further information contact our sales team on:Phone: +61 (7) 55934292Fax: +61 (7) 55934298Web Address: www.hoseflex.com.auEmail: [email protected]

PTFE Hose

Expansion Joints:RubberPTFEStainless

01

03

Stainless Steel Interlock HoseStainless Steel Hose02

04

Composite HoseDucting HoseRubber Hose

06 Swivel Joints

07 PTFE Lined Pipe

05

FittingsIndustrial FittingsHydraulic Fittings

FlangesCouplings


3/14

STAINLESSSTELLHOSE

1

2

3

4

5


6

7

Convoluted Hose Metallic Excellence in liquid and gas transfer applications

Temperature

Contingent upon the extremes of temperature hot or cold, metal is a positive choice as it can withstand temperatureextremes.

Chemicals

Metal hose is an excellent option as it effectively controls exposure to a wide range of chemicals both internal andexternal.

Permeation

Metal hose is not subject to permeation whereas non metal hose can allow permeation through the hose wallmaterial. We have Australian Gas Approved (AGA) certified hose to assure customers of compliance.

Failure

Generally speaking, metal hoses do not disintegrate rapidly causing any major failure. Warning signs are evident thatleaks are evident and the medium escapes gradually. Non metallic hoses can be prone to sudden failure.

External Abrasion and Overbending

A range of options exist to prevent these occurrences; including external braid, spring guards, rubber and PVC coversand protective sleeves.

Heat and fire

Our metal hoses maintain form and structure up to 700 Deg C

Vacuum

Where other hose products will collapse, our metal hose will maintain shape underfull vacuum.

Fittings

We can adapt virtually any fittings to a metal hose - other hose products requirespecial and significant variances. We specialize in providing flexible options.

2.052.04 Stainless Steel Hose Design

STAINLESSSTELLHOSE

1

2

3

4

5

Metallic Convoluted HoseSTAINLESS STEEL HOSESTAINLESS STEEL HOSE

Temp (C) Corr. Factor

-200 1.0

-150 1.0

-100 1.0

-50 1.0

0 1.0

20 1.0

50 0.95

100 0.83

150 0.75

200 0.69

250 0.65

300 0.61

350 0.58

400 0.56

450 0.54

500 0.53

550 0.52

600 0.34

650 0.19

700 0.10

Corrugation DesignThe corrugated hose is manufactured from a cylindrical, thin walledtube formed from rolled strip and welded at the seam. Impressed intothis tube is a corrugated annular profile. Annular corrugation meanseach convolution is perpendicular to the centre line of the hose giving adistinct advantage of movement with each corrugation being relativelyindependent of movement from each other. When the corrugations areclosely spaced, the hose is referred to as closed pitch hose. Conversely,when the corrugations are more widely spaced, the hose is referred to asopen pitch.

When needing greater flexibility Omega style hose is ideal. It has a higherflexing cycle life because of the increase in the number of convolutionsper metre without thinning the wall of the hose. The corrugationshave the tendency to spring back to their original position when thedisplacement forces are removed.

Corrugated Stainless Steel Metallic Hose

ApplicationThe Stainless steel corrugated hose is especially designed to achieveseveral objectives in pipe work design. These include, absorptionor vibration, operate under vacuum, handle temperature extremes,suppress rigid pipe noise transmitted, accommodate reciprocating andflexing movement, operate effectively under high pressures and adjustor correct for misalignment.

CompositionStainless steel corrugated hose is a general purpose industrial hose andis available in different grades of stainless steel including 304, 316, 321& Monel.

High Pressure

S7

Omega

Annular


4/14

STAINLESSSTELLHOSE

1

2

3

4

5


6

7

2.072.06 Jacketed Hose, Pressure Loss & Vibration Information

STAINLESSSTELLHOSE

1

2

3

4

5

Stainless Steel Hose DesignSTAINLESS STEEL HOSESTAINLESS STEEL HOSE

FlexibilityThe flexibility of the corrugated hose is the result of thebending of the metal corrugations. Service life variesdepending upon the severity of the flexing, temperature,corrosive conditions, pressure and vibration to which thehose is subjected.

Unless restrained, corrugated hose will elongate whensubjected to increased internal pressure. Restraint isprovided by a braided covering, consisting of a tubularsheath of woven metal wires fitted tightly over thecorrugated hose and secured at each end. Bendingand flexibility of the corrugated hose is not appreciablyaffected by the wire braid covering.

BraidStainless steel wire braid (SS1) on the hose assemblyprovides the hose with a higher internal pressurecapability by acting as a restraint against hoseelongation, and acts to dampen vibration withoutsignificant loss of flexibility.

A second layer of braid (SS2) may be used to increasepressure rating. The test pressure is not to be exceededor it may incur permanent corrugation deformation.

Unbraided hose is satisfactory for vacuum and lowpressure applications and for protection against verminand abrasion.

Jacketed HoseJacketed hose assemblies are made up of two flexible hose units, one inside another. Bothinner and outer hoses act independently as separate pressure carriers. The outer hosesurrounds the product chamber to keep the products warm or cold.

The media typically is steam, hot oil or hot water to raise the temperature of the fluid movedin the internal hose. Also cold products such as liquid helium or nitrogen can be used to lowerthe temperature of the fluid with in the internal hose.

Pressure lossWhen planning piping systems, the pressure loss ofthe medium is important, in addition to the hosepressure resistance and flexibility. At equal flow ratesthe pressure loss is higher in metal hose rather thanrigid piping. This is caused by the corrugations. It canbe assumed that the pressure loss in corrugated hosesis 100% higher than in new welded steel pipes and instripwound or metal interlock hoses it is 20% higher.

Therefore in the case of corrugated hoses an increasein diameter of 15% and a stripwound or metalinterlock hoses 4% is sufficient to reduce the pressureloss to the same value as new steel pipe.

Vibration information and graphThe inherent flexibility of corrugated hose plus thedampening effect of the wire braid combine to createthe excellent vibration isolation qualities of corrugatedmetal hose. The graph below defines the combinationof amplitudes and frequencies considered to benormal industrial vibration.


5/14

STAINLESSSTELLHOSE

1

2

3

4

5


6

7

2.09 Testing and Cleaning

STAINLESSSTELLHOSE

1

2

3

4

5

STAINLESS STEEL HOSECover / Liner2.08STAINLESS STEEL HOSE

CoverTo protect the Stainless steel hose from unusual external abuse you can use different armours and covers suchas: stainless steel interlock, heat shrink, lay-flat, scuff guarding, fire sleeve, fibre glass tape, PVC, rubber and wirespring-guard.

Fibre glass tape and sleeve cover

Stainless steel interlock cover

Scuff guard

PVC coveringLayflat cover

Wire spring guard

Rope Lag cover

LinersThe most common liner used in a corrugated hose is a metal interlock hose. The liner will allow a smooth flowrate whilst maintaining limited flexibility. The interlock will partially reduce the bend radius and inside diameterof the corrugated hose. The smooth liners reduce associated noise.

Interlock LinerBraid Liner

Flow Velocity ConsiderationThe flow velocity in corrugated metal hose should neverexceed 150/ftsec for gas, or 75 ft/sec for liquids. When the hoseis installed in a bent condition, these flow values should bereduced proportionally to the degree of the bend. Where the flowvelocity exceeds these rates, an interlocked metal hose liner isrecommended.

Service LifeThe Stainless steel corrugated hose is engineered to providemaximum service life when properly installed. Incorrectinstallation, incorrect flexing or careless handling in an applicationwill reduce the effective service life of the hose and causepremature failure of an assembly. The service life can be affected

by many external factors, the environment surrounding theassembly as well as the media being transferred will togetherdetermine a general guide to the service life.

Pressure/TestingThe nominal pressure rating of a corrugated stainless hose variesaccording to type, material and size. The pressure can be affectedby factors such as temperature, pulsation or shock conditions andbending stresses. To avoid distortion of the convolutions of thehose, the maximum test pressure quoted in the literature must notbe exceeded. If requested all hoses can be tested to 112times thecustomers stated working pressure, provided that this does notexceed the stated maximum test pressure.

CleaningPacific Hoseflex can clean their manufactured assemblies forgas, air and oxygen use. The different hose assemblies rangefrom stainless steel corrugated hose to Teflon hoses. The VapourCleaning Tank cleans the assemblies when they are lowered intothe vapour zone, the vapour condenses on the cold work andwashes the grease and oil away. This process is enhanced by theeffect of the higher temperature. When the temperature of thework attains that of the vapour, there is no further condensation,and the cleaning action ceases.

ApprovalsIf required your hoses can be manufactured for use with gas.We are accredited to Gas Approval Standard AG 216 and ourStainless steel corrugated hose will be manufactured on request tostandard ISO 9001:2008 and to International Standard ISO10380


6/14

STAINLESSSTELLHOSE

1

2

3

4

5


6

7

2.112.10 Installation Precautions

STAINLESSSTELLHOSE

1

2

3

4

5

STAINLESS STEEL HOSECalculating hose lengthSTAINLESS STEEL HOSE

Lp

1. Offset MotionOffset motion occurs when one end of the hose assembly is deflected ina plane perpendicular to the longitudinal axis with the ends remainingparallel.

Formula:L=6RS+S Lp=L-S

L - Live hose length (inches)Lp Projected Live Hose Length (inches)R Minimum Centre line Bend Radius for constant flexing (inches)S Offset Motion to one side of Centre line (inches)

Note 1: when the offset motion occurs to both sides of the hose centreline, use total travel in the formula; i.e. 2 times S

Note 2: The offset distance Sfor constant flexing should never exceed25 percent of the centre line bend radius S

Note 3: If the difference between Land Lpis significant, exercise careat installation to avoid stress on hose and braid at the maximum offsetdistance

2. Horizontal Movable Pipe System

L= 4R+1.57S

H= 1.43R+0.785S

H2= 1.43R

3. Vertical Movable Pipe System

L=4R+

H=1.43R+

Illustration of MarkS: Volume of VariationL: Length of Variation0: Angle of Variation: Pi 3.142R: Min centre line bend radius for constant flexLp: Project live hose length

S2

S2

Do not compress or extend axially.Corrugated metal hose installed in-line with the longitudinalaxis of the piping should not be subjected to axialmovement.

Do not torque during installation.Metal hose assemblies should not be used to compensatefor bolt hole misalignment. Floating flanges will help tominimize twisting of the metal hose. Pipe unions will help toreduce twisting during connection to the piping. The use of

two wrenches will help to keep the hose from twisting whentightening the pipe union.

Do not allow hose movement in multiple planes.

Flexing a metal hose in two separate planes of movementwill torque the hose assembly. Always install the metal hoseassembly so that flexing occurs in one plane only and this isthe same plane in which bending occurs.

Avoid sharp bends.

Use elbows to avoid severe bends near the end of the metalhose assembly.

Maintain minimum centreline bend radius.The minimum centreline bend radius for dynamic flexingshould never be less than the values in the productspecification tables.


7/14

STAINLESSSTELLHOSE

1

2

3

4

5


6

7

2.13 Specifications Sheet

STAINLESSSTELLHOSE

1

2

3

4

5

Specifications Sheet2.12STAINLESS STEEL HOSESTAINLESS STEEL HOSE

Safety Factor: 4:1 (Burst Pressure / Working Pressure)All Hose Assemblies are tested to a standard 1000 kPa. (Higher test pressure if required)

Applications

Part No. : SS0-A / SS1-A / SS2-SConstruction : Annular / Close PitchProfile : Medium Flexiblity / Medium PressureTube Available : 304 / 316 Stainless SteelBraid Available: 304 / 316 Stainless SteelSize Available : 1/4- 12Max Temp : 700c

SS0 - Annular Tube OnlySS1 - Annular Tube and Single BraidSS2 - Annular Tube and Double Braid

Metallic Hose - Annular

Construction

Flexibilty

Cycle Life

Pressure Rating

Chemical Resistance

Wall Thickness

Low | Med | High

Applicable Standards

ISO 10380

AGA Approved: AS 4631:2005(upon requirement)Welding Compliant to : AS 4041- Class 1(upon requirement)

Temperature Correction Factor

-200 -150 -100 -50 0 20 50 100 150 200 250 300 350 400 450 500 550 600 650 700

1.0 1.0 1.0 1.0 1.0 1.0 0.95 0.83 0.75 0.69 0.65 0.61 0.58 0.56 0.54 0.53 0.52 0.34 0.19 0.1

No mina l D ia O ut side Di a. (mm ) We ig ht (Kg /m)Min. Bend

Radius (mm)Working Pressure

(kPa)Burst Pressure (kPa)

mm inch SSO SS1 SS2 SS0 SS1 SS2 Static Dynamic SS0 SS1 SS2 SS0 SS1 SS2

6 1/4" 12.1 13.3 15.5 0.13 0.25 0.39 50 127 392 9806 14710 1568 39227 58840

10 3/8" 14.3 15.5 16.7 0.19 0.37 0.54 50 152 392 8826 13239 1568 35304 52956

12 1/2" 16.8 18 19.2 0.21 0.40 0.68 60 175 294 7845 11768 1176 31381 47072

20 3/4" 26.6 27.8 29 0.35 0.60 0.85 70 180 196 6276 9414 784 25105 37658

25 1" 32.3 33.5 34.7 0.47 0.85 1.12 104 229 196 4903 7355 784 19613 29420

32 1 1/4" 42 43.6 45.2 0.51 0.96 1.41 117 267 147 3923 5884 588 15691 23536

40 1 1/2" 51.6 53.2 54.8 0.70 1.18 1.66 152 292 147 2942 4423 588 11768 17652

50 2" 61.7 63.3 64.9 0.85 1.75 2.65 160 318 98 2746 4119 392 10983 16475

65 2 1/2" 77 79 81 1.41 2.70 3.99 175 508 98 2354 3530 392 9414 14122

80 3" 91 93 95 1.62 3.12 4.62 231 610 98 1765 2648 392 7061 10591

100 4" 117.5 119.5 121.5 2.00 3.70 5.40 250 750 78 1569 2354 312 6276 9414

125 5" 149 151 153 2.80 5.00 7.20 318 900 59 1177 1765 236 4707 7061150 6" 178 180 182 3.80 6.60 9.40 353 1050 59 981 1471 236 3923 5884

200 8" 228 230.4 232 6.70 12 17.30 456 1180 49 785 1177 196 3138 4707

250 10" 278 280.8 283.6 9.04 16.2 23.36 560 1220 30 588 883 126 2356 3530

300 12" 333 335.8 338.6 12.25 21.87 31.49 660 1420 20 490 735 80 1961 2472


Applications

Part No. : SS0-O / SS1-O / SS2-OConstruction : Omega / Close PitchProfile : Medium Flexiblity / Medium PressureTube Available : 304 / 316 Stainless SteelBraid Available: 304 / 316 Stainless SteelSize Available : 1/2- 16(Larger sizes upon Request)

Max Temp : 700c

SS0 - Omega Tube OnlySS1 - Omega Tube and Single BraidSS2 - Omega Tube and Double Braid

Metallic Hose - Omega

Construction

Flexibilty

Cycle Life

Pressure Rating

Chemical Resistance

Wall Thickness

Low | Med | High


ISO 10380



-200 -150 -100 -50 0 20 50 100 150 200 250 300 350 400 450 500 550 600 650 700

1.0 1.0 1.0 1.0 1.0 1.0 0.95 0.83 0.75 0.69 0.65 0.61 0.58 0.56 0.54 0.53 0.52 0.34 0.19 0.1

N om ina l D ia Ou tsi de Dia . ( mm) We ig ht (Kg /m )Min. Bend




12 1/2" 20 22 24 0.21 0.40 0.68 65 120 294 7504 12506 294 30016 50024

20 3/4" 28 30 32 0.35 0.60 0.85 100 180 294 5003 8004 294 20012 32016

25 1" 35 37 39 0.47 0.85 1.23 120 280 294 4002 7504 294 16008 30016

32 1 1/4" 43 45 47 0.51 0.96 1.41 140 340 294 3502 6503 294 14008 25612

40 1 1/2" 51 53 55 0.70 1.18 1.66 180 450 294 3002 5603 294 12008 22412

50 2" 62 64 66 0.85 1.75 2.65 220 550 294 2501 4002 294 10004 16008

65 2 1/2" 79 82 85 1.41 2.70 3.99 280 650 294 2001 4002 294 8004 16008

80 3" 97 100 103 1.62 3.12 4.62 350 800 294 2001 3202 294 8004 12808

100 4" 122 125 128 2.00 3.70 5.40 400 1000 294 1601 2501 294 6404 10004

125 5" 151 155 159 2.80 5.00 7.20 500 1200 294 1508 2501 294 6032 10004

150 6" 180 184 188 3.80 6.60 9.40 600 1500 294 1508 2501 294 6032 10004

200 8" 240 245 250 6.70 12.00 17.30 800 2000 294 1201 2001 294 4804 8004

250 10" 298 303 308 10.6 18.10 25.60 1000 2200 294 1001 1601 294 4004 6404

300 12" 360 365 370 17.10 31.40 45.70 1200 2500 294 1001 1601 294 4004 6404

350 14 410 415 420 20.00 36.30 52.60 1400 3000 294 800 1201 294 3200 4804

400 16 460 4650 470 22.80 41.10 59.40 1600 3500 294 600 1001 294 2400 4804


8/14

STAINLESSSTELLHOSE

1

2

3

4

5


6

7

Specifications Sheet2.14STAINLESS STEEL HOSE

2.15 Specifications Sheet

STAINLESSSTELLHOSE

1

2

3

4

5

STAINLESS STEEL HOSE

Metallic Hose - High PressureLow | Med | High


ISO 10380



-200 -150 -100 -50 0 20 50 100 150 200 250 300 350 400 450 500 550 600 650 700

1.0 1.0 1.0 1.0 1.0 1.0 0.95 0.83 0.75 0.69 0.65 0.61 0.58 0.56 0.54 0.53 0.52 0.34 0.19 0.1

N om ina l D ia Ou tsi de D ia . (mm) We ig ht (K g/m )Min. Bend




6 1/4" 12.7 14.5 16.3 0.13 0.25 0.39 25.4 127 1242 17678 28283 4968 70712 113132

10 3/8" 17 18.8 20.6 0.19 0.37 0.54 31.8 139.7 690 10357 16567 2760 41428 66268

12 1/2" 20.8 23.4 25.9 0.58 0.94 1.29 38.1 203.2 552 15139 24219 2208 60556 96876

20 3/4" 30.7 33.3 35.8 0.71 1.18 1.64 50.8 203.2 483 9046 14476 1932 36184 57904

25 1" 38.1 40.6 43.2 1.18 1.79 2.40 76.2 228.6 276 7376 11799 1104 29504 47196

32 1 1/4" 47 50 53.3 1.52 2.47 3.42 82.6 254 228 7659 12254 912 30636 49016

40 1 1/2" 55.1 58.4 61.7 2.02 3.14 4.26 82.6 254 138 5989 9577 552 23956 38308

50 2" 63.8 67.1 70.1 2.38 3.81 5.24 136.7 292.1 104 5589 8942 416 22356 35768

65 2 1/2" 82 85.3 88.6 2.98 4.64 4.91 177.8 609.6 69 3988 6383 276 15952 25532

80 3" 96 99.3 102.4 4.42 6.58 8.74 190.5 711.2 69 3726 5962 276 14904 23848

100 4" 122.2 125.2 128.3 4.61 6.77 8.93 508 1016 55 2298 3678 220 9192 14712

150 6" 174.5 180.3 186.2 5.73 9.60 13.47 609.6 2413 35 1835 2933 140 7340 11732


Applications

Part No. : SS0-HP / SS1-HP / SS2-HPConstruction : Annular / Close PitchProfile : Medium Flexiblity / High PressureTube Available : 304 / 316 / 321 Stainless SteelBraid Available: 304 / 316 Stainless SteelSize Available : 1/4- 6Max Temp : 700c

SS0 - High Pressure Tube OnlySS1 - High Pressure Tube and Single Braid

SS2 - High Pressure Tube and Double Braid

Construction

Flexibilty

Cycle Life

Pressure Rating

Chemical Resistance

Wall Thickness

Safety Factor: 4:1 (Burst Pressure / Working Pressure)All Hose Assemblies are tested to a standard 1000 kPa. (Higher test pressure if required)Applications

Part No. : SS0-S7 / SS1-S7 / SS2-S7Construction : Annular / Standard PitchProfile : Medium Flexiblity / Medium PressureTube Available : 304 / 316 Stainless SteelBraid Available: 304 / 316 Stainless SteelSize Available : 1/4- 14Max Temp : 700c

SS0 - Annular Tube OnlySS1 - Annular Tube and Single BraidSS2 - Annular Tube and Double Braid

Metallic Hose - S7

Construction

Flexibilty

Cycle Life

Pressure Rating

Chemical Resistance

Wall Thickness

Low | Med | High


ISO 10380



-200 -150 -100 -50 0 20 70 150 200 250 300 350 400 450 500 600 700

1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.93 0.89 0.86 0.83 0.81 0.78 0.78 0.77 0.76 0.76

Nominal Dia Outside Dia. (mm) Weight (Kg/m)Min. Bend

Radius (mm)Working Pressure (kPa) Burst Pressure (kPa)


6 1/4" 12.19 14.47 16.25 0.13 0.25 0.39 25.4 127 1241 14589 21546 - 70671 86184

10 3/8" 16.00 18.76 20.57 0.19 0.37 0.53 31.75 139.7 689 10349 16554 - 41396 66217

12 1/2" 20.82 22.60 24.38 0.34 0.50 0.68 38.1 152.39 552 7411 11858 - 29654 47435

20 3/4" 30.73 32.51 34.29 0.58 0.88 1.18 57.15 203.2 483 5460 8735 - 21842 34949

25 1" 38.35 40.13 41.91 0.79 1.12 1.46 69.85 228.6 276 3937 6301 - 15754 25193

32 1 1/4" 46.99 49.02 51.30 1.13 1.60 2.05 88.9 266.7 172 3661 5860 - 14651 23428

40 1 1/2" 55.62 57.91 60.19 1.25 1.84 2.43 101.6 304.8 138 3254 5205 - 13010 20829

50 2" 66.03 69.08 72.13 1.34 2.27 3.20 127 381 104 3558 5695 - 14230 22766

65 2 1/2" 82.04 84.58 87.12 1.76 2.78 3.83 203.2 508 83 2668 4267 - 10673 17078

80 3" 96.01 98.55 101.09 1.81 2.99 4.19 228.6 558.8 69 2179 3488 - 8714 13941

100 4" 123.18 126.49 129.54 2.52 4.01 5.50 330.2 685.8 55 1599 2557 - 6391 10238

125 5" 149.86 153.16 156.21 3.74 5.61 7.03 457.2 787.4 41 1317 2109 - 5267 8425150 6" 174.49 180.33 186.18 5.19 7.11 9.04 482.6 914.4 35 1138 1820 - 4550 7280

200 8" 230.88 233.42 235.71 8.31 14.13 19.99 508 1016 41 1613 2578 - 6439 10307

250 10" 283.97 287.52 290.83 10.17 19.30 28.44 635 1270 35 1585 2530 - 9329 10128

300 12" 310.64 339.39 342.90 13.50 22.19 30.89 762 1524 21 1110 1771 - 4433 7094

350 14 373.37 376.93 380.49 21.10 32.48 43.85 889 1778 21 820 1310 - 3281 5240


9/14

STAINLESSSTELLHOSE

1

2

3

4

5


6

7

2.17 Pump Connectors

STAINLESSSTELLHOSE

1

2

3

4

5

Pump Connectors2.16STAINLESS STEEL HOSESTAINLESS STEEL HOSE

Vibration Eliminator / Pump ConnectorPump Connectors are flexible metal assemblies, primarily designed to isolatevibration from pumps on both the suction and discharge sides of the pump.They help to prevent damage caused by vibration, expansion and contraction.They accept thermal expansion and reduce piping stress due to minormisalignment. Constructed of stainless steel Omega corrugated metal andsurrounded with a woven braid of high tensile stainless steel, these assembliesare flexible and are most suitable to withstand high pressure and temperatures.

S/S Pump Connector Table E M/S Fixed Flanges

Size Part Number Length Working Pressure (kPa) Burst Pressure (kPa)

2" SSPC-50 150mm 2501 1004

2 1/2" SSPC-65 150mm 2501 8004

3" SSPC-80 150mm 2001 8004

4" SSPC-100 150mm 1601 6406

5" SSPC-125 150mm 1508 6032

6" SSPC-150 150mm 1508 6032

8" SSPC-200 200mm 1201 4804

Larger sizes & S/S flanges on request please contact Pacific Hoseflex for m ore information

Applications

Construction : Omega / Close PitchProfile : Medium Flexiblity / Medium PressureTube Available : 304 / 316 Stainless SteelBraid Available: 304 / 316 Stainless SteelSize Available : 2- 8(Larger sizes upon Request)

Max Temp : 700c

Table E M/S Fixed Flanges

Construction

Flexibilty

Cycle Life

Pressure Rating

Chemical Resistance

Wall Thickness

Low | Med | High

Applications

Construction : Omega / Close PitchProfile : Medium Flexiblity / Medium PressureTube Available : 304 / 316 Stainless SteelBraid Available: 304 / 316 Stainless SteelSize Available : 3/4- 2(Larger sizes upon Request)

Max Temp : 700c

BSPT 304 S/S Hex Fixed Males

Construction

S/S Pump Connector BSPT 304 S/S Hex Fixed Males

Size Part Number Length Working Pressure (kPa) Burst Pressure (kPa)

3/4" SSPC-22643 255mm 5003 200012

1" SSPC-22644 255mm 4002 16008

1 1/4" SSPC-22645 255mm 3502 14008

1 1/2" SSPC-22646 305mm 3502 12008

2" SSPC-22647 330mm 2501 10004

Larger sizes & M/S fittings on request please contact Pacific Hoseflex for m ore information

Vibration Eliminator / Pump ConnectorPump Connectors are flexible metal assemblies, primarily designed to isolatevibration from pumps on both the suction and discharge sides of the pump.They help to prevent damage caused by vibration, expansion and contraction.They accept thermal expansion and reduce piping stress due to minormisalignment. Constructed of stainless steel Omega corrugated metal andsurrounded with a woven braid of high tensile stainless steel, these assembliesare flexible and are most suitable to withstand high pressure and temperatures.

Flexibilty

Cycle Life

Pressure Rating

Chemical Resistance

Wall Thickness

Low | Med | High


10/14

STAINLESSSTELLHOSE

1

2

3

4

5


6

7

2.19 Seismic Joints

STAINLESSSTELLHOSE

1

2

3

4

5

Seismic Joints2.18STAINLESS STEEL HOSESTAINLESS STEEL HOSE

Applications

Construction : Omega / Close PitchProfile : Medium Flexiblity / Medium PressureTube Available : 304 / 316 Stainless SteelBraid Available: 304 / 316 Stainless SteelSize Available : 1- 6(Larger sizes upon Request)

Max Temp : 700c

V Shape Seismic Joint

Construction

Flexibilty

Cycle Life

Pressure Rating

Chemical Resistance

Wall Thickness

Low | Med | High

Size DIM A (mm) DIM B (mm)Working Pressure

(kPa)Movement

X,Y & Z (mm)

25mm (1) 412 184 4500 50

32mm (1 1/4) 458 204 3500 5038mm (1 1/2) 498 220 3000 50

50mm (2) 559 244 2500 50

65mm (2 1/2) 702 307 2000 50

75mm (3) 792 345 2000 50

100mm (4) 939 406 1600 50

125mm (5) 1092 467 1506 50

150mm (6) 1246 528 1506 50

25mm (1) 479 217 4500 75

32mm (1 1/4) 529 240 3500 75

38mm (1 1/2) 572 257 3000 75

50mm (2) 636 283 2500 75

65mm (2 1/2) 798 355 2000 75

75mm (3) 897 397 2000 75

100mm (4) 1055 463 1600 75

125mm (5) 1218 530 1506 75

150mm (6) 1382 596 1506 75

25mm (1) 436 246 4500 100

32mm (1 1/4) 591 270 3500 100

38mm (1 1/2) 636 289 3000 100

50mm (2) 702 316 2500 10065mm (2 1/2) 880 396 2000 100

75mm (3) 986 442 2000 100

100mm (4) 1153 512 1600 100

125mm (5) 1325 584 1506 100

150mm (6) 1497 653 1506 100

Seismic Joints and Expansion LoopsFlexible loop applications that include thermal expansion and contraction, and/or building expansion and contraction(singularly or in combination with seismic considerations), are engineered by the system designer to account for thecumulative movement(s) of each individual system.

Piping used in applications and locations subject to seismic conditions have their own set of unexpected randommovements. The random motion common to earthquakes requires that seismic expansion joints be capable ofmovement in any direction. Of the 6 possible directions, PHF sees axial movement of the hose in only two of themcompared to four in an L shaped assembly. Seismic expansion joints orientation can be changed relative to thepiping, further minimizing the likelihood of compressive movement.

Significant cost and safety benefits found in Pacific Hoseflex seismic expansion joints.

It is an inexpensive alternative to dual-tied bellows expansion joints and especially ball joints.

During an earthquake, it protects equipment by allowing boilers, chillers, fan-coil units and other systems to move

independently of the building.

Installed at the connection also prevents nozzles from cracking or shearing off.

A break in the gas pipework could start a fire, which can of course be devastating. This Australian Gas Approval

(AGA) - certified seismic expansion joint will compensate for the movement that occurs during any seismic activitysuch as an earthquake.

Note - Dimension A and B are approx dimensions without Fitting only and are subject to change without notice.


11/14

STAINLESSSTELLHOSE

1

2

3

4

5


6

7

2.21 Stripwound Stainless & Galvanised Metal Hose

STAINLESSSTELLHOSE

1

2

3

4

5

Seismic Joints2.20STAINLESS STEEL HOSESTAINLESS STEEL HOSE

Applications

Construction : Omega / Close PitchProfile : Medium Flexiblity / Medium PressureTube Available : 304 / 316 Stainless SteelBraid Available: 304 / 316 Stainless SteelSize Available : 1/4- 12(Larger sizes upon Request)

Max Temp : 700c

U Shape Seismic Joint

Construction

Flexibilty

Cycle Life

Pressure Rating

Chemical Resistance

Wall Thickness

Low | Med | High

Size DIM A (mm) DIM B (mm)Working Pressure

(kPa)Movement

X,Y & Z (mm)

25mm (1) 152 293 4500 50

32mm (1 1/4) 192 333 3500 5038mm (1 1/2) 228 363 3000 50

50mm (2) 304 417 2500 50

65mm (2 1/2) 380 522 2000 50

75mm (3) 456 596 2000 50

100mm (4) 608 719 1600 50

125mm (5) 760 842 1506 50

150mm (6) 916 965 1506 50

25mm (1) 152 340 4500 75

32mm (1 1/4) 192 426 3500 75

38mm (1 1/2) 228 416 3000 75

50mm (2) 304 471 2500 75

65mm (2 1/2) 380 589 2000 75

75mm (3) 456 669 2000 75

100mm (4) 608 800 1600 75

125mm (5) 760 931 1506 75

150mm (6) 916 1061 1506 75

25mm (1) 152 380 4500 100

32mm (1 1/4) 192 426 3500 100

38mm (1 1/2) 228 461 3000 100

50mm (2) 304 518 2500 10065mm (2 1/2) 380 647 2000 100

75mm (3) 456 732 2000 100

100mm (4) 608 870 1600 100

125mm (5) 760 1007 1506 100

150mm (6) 916 1142 1506 100

Note - Dimension A and B are approx dimensions without Fitting only and are subject to change without notice.

Stripwound hose is manufactured from a helically wound profiledstrip, with the strip edges being completely interlocked. The diameterof the hose remains constant when hose is cut. The hose is availablewith or without a packing groove.

Individual strips are connected together by overlapping and flexibilityis obtained by the adjacent turns sliding on each other.When compared to other types of flexible hose, the Stripwoundproduct is known for its strength, durability and ability to acceptboth axial and lateral movements. The packed hose has a continuousfilament of thread, rubber or metal constructing the locking section.

Galvanised stripwound offers significantly lower initial cost for applications where performance ofstainless steel is not required however the stainless steel offers longer service life and freedom fromcorrosion. The superior visual appearance and higher operating temperature capability of stainlesssteel may also be important in certain applications. Particularly suitable for absorbing vibration andthermal expansion in engine exhaust systems for both commercial and industrial applications. Also toaccommodate bends and offsets in solid fuel burning installations or in other ducting applications.

Hose assemblies are available in various standard lengths, or prepared to the customers specificrequirements. Hoses are supplied in mid position unless otherwise specified. Hoses without end fittingsmay be attached directly to manifolds by clamping. End fittings may be attached by welding or brazingusing a suitable filler rod.


12/14

STAINLESSSTELLHOSE

1

2

3

4

5


6

7

2.23 Stripwound Metal Hose

STAINLESSSTELLHOSE

1

2

3

4

5

Stripwound Metal Hose2.22STAINLESS STEEL HOSESTAINLESS STEEL HOSE

Typical applications include commercial vehicle, passenger vehicle plus plant and portablegenerator set exhaust systems. This is a general purpose flexible metallic light weightconduit designed for a variety of installations requiring motion, vibration and bending.

Size Part Number I.D. (mm) O.D. (mm) Bend Radius (mm)

3/4 EEI4S-20 19 22.0 140

1 EEI4S-25 25 28.0 152

1 1/4 EEI4S-32 32 36.0 160

1 1/2 EEI4S-38 38 41.3 166

1 5/8 EEI4S-41 41 44.3 180

1 3/4 EEI4S-45 44 47.3 190

1 7/8 EEI4S-48 48 51.3 195

2 EEI4S-50 51 54.3 205

2 1/4 EEI4S-54 57 60.3 235

2 1/2 EEI4S-63 63 66.3 260

2 3/4 EEI4S-70 70 73.3 285

3 EEI4S-80 76 79.3 205

3 1/2 EEI4S-90 90 94.2 250

4 EEI4S-100 102 106.2 370

4 1/2 EEI4S-114 114 118.2 490

5 EEI4S-125 127 131.2 515

5 1/2 EEI4S-140 140 144.2 600

6 EEI4S-150 152 156.2 655

7 EEI4S-175 178 183.0 7408 EEI4S-200 203 208.0 800

9 EEI4S-225 230 234.0 950

10 EEI4S-250 254 259.0 1100

12 EEI4S-300 305 310.0 1400

14 EEI4S-350 355 360.0 1500

Applications

Construction : UnpackedProfile : Medium Flexiblity / Medium PressureTube Available : Galvanised Steel / 304 Stainless SteelSize Available : 3/4- 14(Larger sizes upon Request)

Max Temp : 700c

Light Weight Engine Exhaust Interlock

Construction

Flexibilty

Cycle Life

Pressure Rating

Chemical Resistance

Wall Thickness

Low | Med | High

The interlock is specially wound into a double interlock hose from two separatemetal strips. The double interlock hose is manufactured for the purpose ofproducing a liner to create a moderately smooth inner bore.

The inner will provide a higher flow rate giving the hose a variety of advantagessuch as nil air loss from its tighter construction, elimination of materialsdegradation and contamination experienced with other hoses, as well as a longerservice life due to greater abrasion resistance.

Applications may include large volume transfer of dry bulk materials, difficult tofluidize materials in industrial plants, ships, barges, silos, elevators, trucks andrail units. Uses include pneumatic transfer of bulk materials in powder, pellet,granules, flake or pebble form such as chemicals, feed, flour, grain, plastics, sugar,cement, pebble, lime and sintered iron ore.

Size Part Number I.D. (mm) O.D. (mm) Bend Radius (mm)

1 1/4 MHI4S-32 32 36 203

1 1/2 MHI4S-40 38 42 255

1 3/4 MHI4S-45 44 48 305

2 MHI4S-50 51 55 355

2 1/4 MHI4S-54 57 61 368

2 1/2 MHI4S-63 63 67 381

3 MHI4S-80 76 81 406

3 1/2 MHI4S-90 90 95 432

4 MHI4S-100 102 107 457

4 1/2 MHI4S-114 114 119 5085 MHI4S-125 127 132 559

5 1/2 MHI4S-140 140 145 584

6 MHI4S-150 152 158 635

8 MHI4S-200 200 210 900

10 MHI4S-250 250 261 1200

Applications

Construction : Unpacked / LinerProfile : Medium Flexiblity / Medium PressureTube Available : Galvanised Steel / 304 Stainless SteelSize Available : 1 1/4- 10(Larger sizes upon Request)

Max Temp : 700c

Material Handling Lined Interlock

Construction

Flexibilty

Cycle Life

Pressure Rating

Chemical Resistance

Wall Thickness

Low | Med | High


13/14

STAINLESSSTELLHOSE

1

2

3

4

5


6

7

Stainless Steel Hose Fittings2.24STAINLESS STEEL HOSE

2.25 Stainless Steel Hose Fittings

STAINLESSSTELLHOSE

1

2

3

4

5


AF1 - Fixed Hex MaleAF2 - Swivel FemaleAF3 - Fixed FlangeAF4 - Swivel FlangeAF5 - Toe NippleAF7 - Fixed Female SocketAF10 - Welded Pipe EndAF11 - Male UnionAF12 - Female Union

SS0 - Convoluted hoseSS1 - Convoluted hose + one braidSS2 - Convoluted hose + double braid

AF1

AF2

AF3

AF4

AF5

AF7

AF10

AF11

AF12

SS0

SS1

SS2

Instructions: To place an order or request a quotation, please complete section I. If you needassistance in specifying an assembly, complete Section II as well as the End Fittings portionof Section I. When completed, Fax: (617) 55 934 298 or Email: [email protected] thisform to Pacific Hoseflex

Technical Information (Hose Specification Sheet)

Customer:

Phone:

Email:

I. Specification Information

Request Quote Yes / No Circle One

Place Order P.O.#

Quantity:

hose Type:

Length:

End Fittings (Type & Size for both ends)

Contact:

Fax:

Date:

Quote Ref #

Date Required:

Diameter:(mm)

(Live Length / Overall Length ) Circle one

End #1- Size: Type: Material:

End #2- Size: Type: Material:

Liner Required: Yes / No Circle One

Special Fabrication:

Accessories:

If Yes, Liner Material:

II. Application Information:

(Sketch the installation and include all dimensions and motions of hose during application and any other considerations)

Temperature (Assumption is 21c for all)

Media: Min. c Max. c

Media:

Max. Pressure (psi):

Max. Velocity (feet / second):

Application:

Environment: Min. c Max. c

(Assumption is the Media is compatible with all available materials)

Fluctuations (None / Pulsating / Shock)Circle one

(Assumption is Velocity is too slow to affect performance)

Type of Motion: (Static / Dynamic / Vibration) Circle one (Assumption is Static)


14/14

STAINLESS

STELLHOSE

1

2

3

4

5


6

7

10 Alex Fisher Drive, Burleigh Heads Qld 4220P.O. Box 2245 Burleigh Heads M.D.C Qld 4220 Australia

Ph: (617) 55934292 | Fax: (617) 55934298

duzina gibljivog creva - stainless_steel_catalogue.pdf

Documents