equipment catalogue europe

www.lincolnelectriceurope.com

Welding & CuttingEquipmentPRODUCT CATALOGUE

VIKING™ PAPR 3350NEW WELDING HELMET WITH POWERED AIR PURIFYING RESPIR ATOR

P. 122-125


TABLE OF CONTENTS

STICK WELDERS 3

11

18

27

35

41

47

58

67

71

75

86

95

97

100

116

126

131

TIG WELDERSMIG FLUX-CORED WELDERS

MULTI-PROCESS WELDERSADVANCED PROCESS WELDERSPOWER WAVE® SOFTWARE SOLUTIONSSEMIAUTOMATIC WIRE FEEDERSSUBMERGED ARC EQUIPMENTENGINE DRIVEN WELDERSPLASMA CUTTERSTRAINING EQUIPMENTWELD FUME CONTROLHARD AUTOMATIONSTRIP CLADDINGGUNS & TORCHESWELDING HELMETSWELDING GEARWELDING ACCESSORIES

Table of Contents

www.lincolnelectriceurope.com2

LINCOLN ELECTRIC 1

Year warrantyPar ts &Labour

PERFO R M A N C E P L U S P R O T E C TIO

N

USING THIS CATALOGUE

1

7

2

3

4

5

6

For constant current stick and TIG processes

Alternating current welding output

2-Roll Wire Feeder

For constant voltage MIG, flux-cored and subarc processes

Direct current welding output

4-Roll Wire Feeder

For multi-process con-stant current or constant voltage applications

Alternating or direct current welding output

Continuous auxiliary power output

Single phase input power

Single or three phase input power

42 Volt AC Wire feeder input power

50/60 Hertz input power

Engine Driven –Diesel

Three phase input power

115 Volt AC Wire feeder input power

40 Volt DC Wire feeder input power

Output Icons

www.lincolnelectric.eu6

STICK WELDERS

OUTPUTINPUT

INPUT OUTPUT

Inverter

LIN

COLN ELECTR

IC3Year warranty

Parts &Labour

PE

RFO

RMANCE PLUS PROTE

CTI

ON

Inverter

Technical Specifications

Product Item Number Primary Voltage(50-60Hz)

Current Range (A) Rated Output Fuse Size (A)

(slow) Weight (kg) Dimensions HxWxD (mm)

Protection/ Insulation Class

Invertec® V205-S K12019-1 230/400V/1Ph 5-200 200A/28V@35%

170A/26.8V@100% 32/20 15 385 x 215 x 480 IP23S / H

Processes• Stick• Lift TIG

Recommended Consumables• Steel

Pantafix®, Omnia® 46; Baso® G, 120, 48SP

• Stainless steel Arosta®, Limarosta®, Jungo® 304L, 316L, 309S

• Hardfacing Wearshield® MM, ME / RepTec

Unit Includes• 2 m input cable• Carrying strap

Key Options• KIT-200A-25-3M Cable Kit 200A -

25 mm² - 3 m• KIT-200A-35-5M Cable Kit 200A -

35 mm² - 5 m• K10513-17-4V TIG torch LT17 GV - 4 m• K10513-17-8V TIG torch LT17 GV - 8 m• K10095-1-15M Remote control - 15 m• W0200002 Undercarriage

Smart switching, full flexibilityInvertec® V205-SManufactured using the latest digital inverter technology, combining both a rugged industrial construction with excellent arc characteristics. The lightweight but solid build of this machine makes it suitable for operation on site in conjunction with a generator or within a workshop environment, providing maximum flexibility. The smart switching 230/400V single phase enables connection of the V205S virtually everywhere.

Features• Smart switching 230/400V single phase.• Excellent arc characteristics.• Maximum output of 200A allows the use of

electrodes up to 4.0 mm.• Excellent stick rutile, basic and cellulosic welding

performance.• Adjustable “Arc Force” and “Hot Start” as standard

• Fully featured and user-friendly control panel with digital display allow precise setting of welding current.

• Features “Lift TIG” with no tungsten contamination.

Professional Performance. Industrial Innovation

Features• More Power- 30% more output current with the same input

current allows welding with up to 4.0mm electrode from a 16A input.

• Portable Everywhere - Lightweight, easy to handle, can operate with up to 100m mains extension cables and suitable to use from a generator.

• Robust Design, Industrial Use - Electrical safety (IP23), potted PC boards and optimum airflow reduces contamination to extend the equipments life in the harshest environmental conditions.

• Excellent Welding Experience - Good arc ignition with a smooth stable arc, Soft and Crisp mode, Auto Adaptive Arc Force an optimum choice for welding with every type of electrode.



Pantafix®, Omnia® 46, Baso® G, 120, 48SP



Unit Includes• 3 m input cable

Key Options• KIT-200A-25-3M Cable Kit 200A - 25 mm² - 3 m• KIT-200A-35-5M Cable Kit 200A - 35 mm² - 5 m• K10513-17-4V TIG torch LT17 GV - 4 m• K10513-17-8V TIG torch LT17 GV - 8 m

The Invertec® 160SX is built to perform: rugged and robust on one hand, portable in another. Lightweight and easy to handle in a wide variety of applications, it is ideal for professional industrial maintenance and small industrial projects, both on site and in workshops. Equipped with Power Factor Correction (PFC) Invertec® 160SX provides almost 30% output with the same input current. PFC reduces the power dissipation on input cables by up to 50%. Compliant with the latest European standard EN 61000-3-12.

Invertec® 160SX


Product Item Number Primary Voltage (50-60Hz)




Invertec® 160SX K12050-1 115/230V/1Ph 5-160 160A/26.4V@30%

100A/24V@100% 16A 9.2 224 x 148 x 385 IP23 / H

• Cellulosic Capability - No electrode is too difficult to weld with. Suitable for small diameter pipe welding.

• Extended Input Voltage Range - Smart switching input power allows use from either a single-phase 115v or 230v mains supply.

• Green Welding Initiative - PFC gives low current consumption, energy saving, low current harmonics and reduction of the total CO2 produced by the welding process.

www.lincolnelectric.eu6

STICK WELDERS

OUTPUTINPUT

INPUT OUTPUT

Inverter

LIN

COLN ELECTR

IC3Year warranty

Parts &Labour

PE

RFO

RMANCE PLUS PROTE

CTI

ON

Inverter







170A/26.8V@100% 32/20 15 385 x 215 x 480 IP23S / H



Pantafix®, Omnia® 46; Baso® G, 120, 48SP




Key Options• KIT-200A-25-3M Cable Kit 200A -

25 mm² - 3 m• KIT-200A-35-5M Cable Kit 200A -

35 mm² - 5 m• K10513-17-4V TIG torch LT17 GV - 4 m• K10513-17-8V TIG torch LT17 GV - 8 m• K10095-1-15M Remote control - 15 m• W0200002 Undercarriage




performance.• Adjustable “Arc Force” and “Hot Start” as standard




Features• More Power- 30% more output current with the same input

current allows welding with up to 4.0mm electrode from a 16A input.

• Portable Everywhere - Lightweight, easy to handle, can operate with up to 100m mains extension cables and suitable to use from a generator.

• Robust Design, Industrial Use - Electrical safety (IP23), potted PC boards and optimum airflow reduces contamination to extend the equipments life in the harshest environmental conditions.

• Excellent Welding Experience - Good arc ignition with a smooth stable arc, Soft and Crisp mode, Auto Adaptive Arc Force an optimum choice for welding with every type of electrode.



Pantafix®, Omnia® 46, Baso® G, 120, 48SP




Key Options• KIT-200A-25-3M Cable Kit 200A - 25 mm² - 3 m• KIT-200A-35-5M Cable Kit 200A - 35 mm² - 5 m• K10513-17-4V TIG torch LT17 GV - 4 m• K10513-17-8V TIG torch LT17 GV - 8 m


Invertec® 160SX






Invertec® 160SX K12050-1 115/230V/1Ph 5-160 160A/26.4V@30%

100A/24V@100% 16A 9.2 224 x 148 x 385 IP23 / H

• Cellulosic Capability - No electrode is too difficult to weld with. Suitable for small diameter pipe welding.

• Extended Input Voltage Range - Smart switching input power allows use from either a single-phase 115v or 230v mains supply.

• Green Welding Initiative - PFC gives low current consumption, energy saving, low current harmonics and reduction of the total CO2 produced by the welding process.

Catalogue Section TabIdentifies catalogue section for easy-to-find products.Product NameOfficial Lincoln product name.Product DescriptionBrief description of the product.Opening ParagraphThis is a general description of the product. It may also include features and applications.Key FeaturesThis section highlights the key features and benefits of the product.Product PictureDetailed photo of Lincoln products.ProcessesRecommended arc welding processes for the product.

Recommended consumablesSee below for descriptions.Unit IncludesThese sections list options that are included for the product.Key optionsAll options available.OrderingTo order, select the product number that best fits your welding needs.Green InitiativeLincoln Electric awareness program to reduce environmental impact.Input & Output IconsSee below for descriptions.Technical SpecificationsCommon specifications, ratings, dimensions and weight of the product.NEW! iconInforms about new products.

Using this catalogue

Color coding WarrantyEach section of the catalogue is color-coded

Warranty signs shown at every product

IconsInput Icons

1

72

8

8

3

9

9

1011

11

10

12

12

13

14

15

1314

4

5

6

LINCOLN ELECTRIC 2



N

LINCOLN ELECTRIC 3



N

From simple jobs to advanced applications,Lincoln Electric offers a full range of stick electrodes

*Photos and illustrations are non-contractual – they may differ from the actual product in details and colour.

15

Advanced wave-form control technology


STICK WELDERSVersatile Stick Welders for Shop or FieldWeld a Wide Range of Materials and ThicknessesConventional or Inverter Models

KEY: ● Excellent ● Good ▲ Possible

4www.lincolnelectriceurope.com

Conv

entio

nal

Inve

rter

HOT ROD 500SThe tough and powerful professional welder

LINC 405-S & SA, LINC 406, LINC 635-S & SAThe rugged and distinguished workhorses

Invertec® V205-SSmart switching, full flexibility

Invertec® 160SXProfessional performance. industrial innovation

Invertec® 135S, 150S, 170SSmall, powerful and robust

Stick Welders

Conventional

Invertec® 270SX, Invertec® 400SXProfessional welders for tough conditions

Mod

e

Pola

rity

Out

put

Rang

e

(A)

Volt

age

(V)

Stic

k

Lift

TIG

TIG

Scra

tch

Arc

Goug

e

Auto

-sen

sing

/PFC

Hot

Sta

rt

Arc

Forc

e

Met

ers

War

rant

y (y

ears

)

OUTPUT INPUT PROCESS FEATURESInverter

Invertec® 135S CC DC 10-120 230 ● ● 2

Invertec® 150S CC DC 10-140 230 ● ● ■ ■ 2

Invertec® 170S CC DC 10-160 230 ● ● ■ ■ ■ 2

Invertec® 160SX CC DC 5-160 115/230 ● ● ■ ■ ■ ■ 3

Invertec® V205-S CC DC 5-200 230/400 ● ● ■ ■ ■ ■ 2

Invertec® 270SX CC DC 5-270 400 ● ● ■ ■ ■ 3

Invertec® 400SX CC DC 5-400 400 ● ● ● ■ ■ ■ 3

LINC 405-S CC DC 15-400 230/400 ● ● ● ■ ■ 2

LINC 405-SA CC DC 15-400 230/400 ● ● ● ■ ■ ■ 2

LINC 406 CC DC 30-400 220/380/440 ● ● ▲ ■ ■ ■ 2

LINC 635-S CC DC 15-670 230/400 ● ● ▲ ■ ■ 2

LINC 635-SA CC DC 15-670 230/400 ● ● ▲ ■ ■ ■ 2

HOT ROD 500-S CC DC 50-625 380/415220/380/400 ● ● ▲ ■ ■ ■ 3

rev.: E-SMAW01-EN-10-04-17


STICK WELDERS Inverter

OUTPUTINPUT Technical Specifications

Product Item Number Primary Voltage (50-60 Hz)




Invertec® 135SK12033-1

230V/1Ph

10-120 120A/24.8V@25%70A/22.8V@100% 14 5.0 224 x 148 x 315 IP21 / F

K12033-1-P


10-140 140A/25.6V@25%80A/23.5V@100% 17 7.4 244 x 148 x 365

IP23 / FK12034-1-P


10-160 160A/26.4V@20%80A/24V@100% 23 7.8 244 x 148 x 365

K12035-1-P

Processes• Stick• Lift TIG (Invertec® 150S and 170S)• TIG Scratch (Invertec® 135S)

Recommended Consumables• Steel Pantafix®, Omnia® 46, Baso® G, 120, 48SP




Key Options • KIT-140A-16-3M Cable Kit 140A – 16 mm² – 3 m • KIT-140A-25-5M Cable Kit 140A – 25 mm² – 5 m • K10529-17-4VS TIG torch LTP 17 GV – 4 m

Features• Robust design: unique rubber corners and metal housing to withstand tough environmental conditions.• Premium arc: advanced Lincoln technology and Lincoln know-how guarantees optimum performance

every time.• Power Surplus: additional power for superior arc control.• Auto Adaptive Arc Force (150S and 170S).• Built in “Hot Start” for stable arc with lower spatter level (150S and 170S). • Long cables: primary power extension cables up to 60 m can be used with the 150S and 170S.• Lift TIG with excellent striking without tungsten contaminations (150S and 170S).• Portable lightweight, small and robust.

The Invertec® 135S, 150S and 170S offer a range of machines built with the job in mind. These stick machines are suited to a variety of applications and working environments, ensuring that there will be a machine to meet your needs. The design has been focused on providing excellent welding and starting behaviour in a robust and reliable package. Each unit is equipped with a unique set of features and capabilities to guarantee perfect welding for your application. Welding machines need to be tough. At Lincoln Electric, we know that modern equipment needs to be capable of handling harsh environmental conditions. That is why we have built this range in a robust metal case, with large rubber corners and push control buttons for added protection.Rugged and robust on one hand, portable on another, the Invertec® 135S, 150S and 170S are lightweight and easy to handle in any situation.

Small, powerful and robustInvertec® 135S, 150S, 170S

LINCOLN ELECTRIC 2



N

Among other tests, the Invertec® 135S, 150S and 170S were subjected to extreme temperature environmental testing.

Pack version

rev.: E-SMAW02-EN-25-09-17


STICK WELDERS

OUTPUTINPUT

INPUT OUTPUT

Inverter

Inverter




(slow)Weight (kg)

Dimensions HxWxD (mm)



170A/26.8V@100% 32/20 15 385 x 215 x 480 IP23S / H


Recommended Consumables• Steel Pantafix®, Omnia® 46; Baso® G, 120, 48SP




Key Options • KIT-200A-25-3M Cable Kit 200A – 25 mm² – 3 m • KIT-200A-35-5M Cable Kit 200A – 35 mm² – 5 m • K10529-17-4V TIG torch LTP 17 GV – 4 m • K10529-17-8V TIG torch LTP 17 GV – 8 m • K10095-1-15M Remote control – 15 m • W0200002 Undercarriage




performance.• Adjustable “Arc Force” and “Hot Start” as standard.• Features “Lift TIG” with no tungsten contamination.



Features• More Power – 30% more output current with the same

input current allows welding with up to 4.0mm electrode from a 16A input.

• Portable Everywhere – Lightweight, easy to handle, can operate with up to 100m mains extension cables and suitable to use from a generator.

• Robust Design, Industrial Use – Electrical safety (IP23), potted PC boards and optimum airflow reduces contamination to extend the equipments life in the harshest environmental conditions.

• Excellent Welding Experience – Good arc ignition with a smooth stable arc, Soft and Crisp mode, Auto Adaptive Arc Force an optimum choice for welding with every type of electrode.






Key Options • KIT-200A-25-3M Cable Kit 200A – 25 mm² – 3 m • KIT-200A-35-5M Cable Kit 200A – 35 mm² – 5 m • K10529-17-4V TIG torch LTP 17 GV – 4 m

• K10529-17-8V TIG torch LTP 17 GV – 8 m


Invertec® 160SX






Invertec® 160SX K12050-1 115/230V/1Ph 5-160 160A/24V@15%

100A/26.4V@100% 16A 9.2 224 x 148 x 385 IP23 / H

• Cellulosic Capability – No electrode is too difficult to weld with. Suitable for small diameter pipe welding.

• Extended Input Voltage Range – Smart switching input power allows use from either a single-phase 115V or 230V mains supply.

• Green Welding Initiative – PFC gives low current consumption, energy saving, low current harmonics and reduction of the total CO₂ produced by the welding process.

LINCOLN ELECTRIC 2



N

LINCOLN ELECTRIC 3



N

rev.: E-SMAW03-EN-25-09-17


STICK WELDERS Inverter

Features• Robust, built for heavy environmental conditions.• Fully featured and user friendly control panel with

digital display allows precise setting of welding current.• Soft and Crisp mode: multiple arc modes for different

electrode types.• Auto Adaptive Arc force: standard in Soft and Crisp

modes the automatic variable Arc Force operates when required.

The Invertec® 270SX & 400SX Stick and Lift TIG welders have been designed and manufactured to combine both a rugged industrial construction with excellent arc characteristics. The machines are built to handle harsh environmental conditions using Lincoln tunnel technology to separate the PCBs and sensitive parts from contaminating cooling airflow. The robust metal case with large protective rubber corners make them suitable for operation on site in conjunction with a generator, or within a workshop environment, providing maximum flexibility and durability. Intensive and extensive testing in the Lincoln lab guarantees the quality of these welders.

Professional welders for tough conditions

Invertec® 270SXInvertec® 400SX

Processes• Stick• Lift TIG• Gouging (400SX)





Key Options • KIT-250A-35-5M Cable Kit 250A – 35 mm² – 5 m • KIT-300A-50-5M Cable Kit 300A – 50 mm² – 5 m • KIT-400A-70-5M Cable Kit 400A – 70 mm² – 5 m • K10529-17-4V TIG torch LTP 17 GV – 4 m • K10529-17-8V TIG torch LTP 17 GV – 8 m • K10095-1-15M Remote control – 15 m • W0200002 Undercarriage (270SX) • K2694-1 Undercarriage (400SX) • Adjustable Hot Start and Arc Force allow a

smooth start/restart of the electrode and prevent sticking of the electrode in the weld pool.


• Maximum output of 270A and 400A allows the use of 5.0 mm (270SX) and 6.3 mm (400SX) electrodes.






Invertec® 270SX K12040-1 400V/3Ph

5-270 270A/30.8V/35%200A/28V/100% 20 23.6 389 x 247 x 502

IP23 / HInvertec® 400SX K12042-1 5-400 400A/36V/35%

300A/32V/100% 30 36 455 x 301 x 632

OUTPUTINPUT

Thicknessmm

Current(A)

Thickness(mm)

12 and up

8 and up

6 and up

3 and up

LINCOLN ELECTRIC 3



N

Stainless

Steel

High recovery

Arc gouge

rev.: E-SMAW04-EN-25-09-17


STICK WELDERS

INPUT OUTPUT

Conventional

LINC 405-S & SA, LINC 406LINC 635-S & SA

Exceptionally rugged conventional stick rectifiers built to be used under harsh environmental conditions. The units are available in two versions:- the basic LINC 405-S and LINC 635-S ready to support stick welding with all rutile,

basic and cellulosic electrodes.- LINC 406, LINC 405-SA and LINC 635-SA complete with the additional features of Arc Force,

Hot Start and digital meters.

The rugged and distinguished workhorses

Processes• Stick• Lift TIG DC (-SA)• Gouging





Key Options • KIT-400A-70-5M Cable Kit 400A – 70 mm² – 5 m • GRD-400A-70-xM Ground cable 400A – 70 mm² – 10/15 m • E/H-400A-70-xM Electrode holder 400A – 70 mm² – 5/10 m • FL060180600-L FLAIR 600 Gouging Torch • K10095-1-15M Remote control – 15 m




(slow)Weight (kg)



LINC 405-S K14002-2230/400V/3Ph 15-400 400A/36V/35%

240A/29V/100%63/40 126 640 x 580 x 700

IP23 / H

LINC 405-SA K14002-1

LINC 406 K14104-1 220/380/440V/3Ph 30-400 63/40/32 135 650 x 580 x 690

LINC 635-S K14038-2230/400V/3Ph 15-670 670A/44V/35%

400A/36V/100% 100/63 150 670 x 580 x 700LINC 635-SA K14038-1

Features• Rugged conventional welding rectifier with excellent arc characteristics.• Capable to weld rutile, basic and cellulose electrodes.• Arc gouging capability.• Hot Start supporting excellent arc starting (SA & 406).• Arc Force to prevent sticking of the electrode in the welding pool (SA & 406).• Digital meters showing welding amperage (SA & 406).• Easy to understand graphic control panels.• Fan on demand (F.A.N.™) built-in reduces power and the intake of dust and fumes.• Ready to be moved. Equipped with wheels, pull bar and two lifting hooks.• Lift TIG DC capability (SA only).

LINCOLN ELECTRIC 2



N

rev.: E-SMAW05-EN-17-10-16


STICK WELDERS

OUTPUTINPUT

Processes• Stick• Gouging• TIG





Key Options • K10376 Adapter M14/DINSe • E/H-400A-70-xM Electrode holder, 400A – 70 mm² – 5/10 m • GRD-600A-95-10M Ground cable 600A – 95 mm² – 10 m • K14092-1 48V AC socket (1500W) kit • K14090-1 A/V meter kit • FL060180600-L FLAIR 600 Gouging Torch • K10095-1-15M Remote control – 15 m






HOT ROD 500SK14089-1 380/415V/3Ph

50-625 600A/44V/35%375A/35V/100%

63 203 795 x 566 x 813 IP23 / HK14089-2 220/380/400V/3Ph

Features• Excellent arc characteristics for a wide range of electrode types.• Maximum output of 625A allows the use of electrodes up to 6.3 mm and air carbon gouging

with 8 mm electrodes.• Compatible with rutile, basic and cellulosic electrodes.• Stackable case design with built-in lift hook allows easy storage and handling.• Submersion dipped transformer assembly and fully potted Power Circuit Board for added

corrosion and moisture protection.• Input voltage compensation for constant output.• Thermostatic overload protection.

The constant current welding rectifier HOT ROD 500-S is a three phase heavy duty power source with a current range of 50-625A. This machine is fan cooled and enclosed in a rigid case with removable side panels for convenient servicing, and on a frame suitable for stacking up to three machines. The control circuit compartment is totally potted for complete protection and located behind an inspection panel for easy access. The unit is completely weatherproof and designed for extreme environmental conditions.Whether using mild steel, low hydrogen, stainless steel or hardfacing electrodes, the HOT ROD 500-S produces a smooth, quality arc for consistent results day-in day-out. If you need a reliable machine for arc air gouging, the HOT ROD 500S can help you do that too.

HOT ROD 500SConventional

The tough and powerful professional welder

LINCOLN ELECTRIC 3



N

rev.: E-SMAW06-EN-10-04-17


STICK WELDERS

Lincoln TIG Welders Give You the Power to Perform!SM• Precision Arc Control• Code Quality Results• Convenient High Value Features

• KIT-140A-16-3M (140A – 16 mm² – 3 m)• KIT-140A-25-5M (140A – 25 mm² – 5 m)• KIT-200A-25-3M ( 200A – 25 mm² – 3 m)• KIT-200A-35-5M ( 200A – 35 mm² – 5 m)• KIT-250A-35-5M ( 250A – 35 mm² – 3 m)• KIT-300A-50-5M ( 300A – 50 mm² – 5 m)• KIT-400A-70-5M (400A – 70 mm² – 5 m)

• GRD-400A-70-10M (400A – 70 mm² – 10 m)• GRD-400A-70-15M (400A – 70 mm² – 15 m)• GRD-600A-95-10M (600A – 95 mm² – 10 m)

• K10529-17-4VS LTP 17 G, 4 m

• K10529-17-4V LTP 17 G, 4 m• K10529-17-8V LTP 17 G, 8 m

ACCESSORY KITSCable kits (ground/electrode)with ground cable & electrode holder (clamp)

Item n°:

Cable kits (ground)

Item n°:

REMOTE CONTROLS1 potentiometer, 6-pins, 15 mItem n°:K10095-1-15M

Extension cableItem n°:K10398

UNDERCARRIAGES2-wheeled cart, delivered as a kit.For use with V205S, 270SXItem n°:W0200002

4-wheeled undercarriage with gas cylinder platform delivered as a kit. For use with 400SX.Item n°:K 2694-1

TIG TORCHESThe Linc Torch Premium (LTP) range is enhancing our current range of TIG torches, providing even better performance for the welder's comfort. Designed to meet the challenges of a variety of applications in maintenance, fabrication or construction sites, the new torches are offered in both air-cooled and water-cooled version.

35-50 mm² connector

10-25 mm² connector

Linc Torch Premium LTP 17 GV, manual valve140A DC / 100A AC @ 35%

Accessories

BUILT TO PERFORMLINCOLN ELECTRIC WELDING EQUIPMENT

rev.: E-SMAW07-EN-10-04-17

STICK WELDERS


TIG WELDERSPrecision Arc ControlCode Quality ResultsConvenient High Value Features



AC/D

C In

vert

erDC

Inve

rter

TIG Welders

Invertec® V205-TP-2VSmart switching, full flexibility

Invertec® V270-T & TPDesigned and engineered for durability

Invertec® 170TX & TPX, Invertec® 220TPXProfessional TIG welders for tough conditions

Invertec® 300TPX, Invertec® 400TPXIndustrial TIG welders for tough conditions

AC/DC Inverter

Mod

e

Pola

rity

Out

put

Rang

e(A

mps

)

Volt

age

(V)

Stic

k

Lift

TIG

TIG

HF

TIG

PULS

E

Auto

rec

onne

ct

Pow

er F

acto

r Co

rrec

tion

(PFC

)

Vari

able

AC

freq

Mem

ory

Met

ers

War

rant

y (y

ears

)

OUTPUT INPUT PROCESS FEATURESDC Inverter

1 pha

se

inve

rter

s

Invertec® 170TX CC DC 5-170 230 ● ● ● ■ 3

Invertec® 170TPX CC DC 5-170 230 ● ● ● ● ■ ■ 3

Invertec® V205-TP 2V CC DC 5-200 230/400 ● ● ● ● ■ ■ 2

Invertec® 220TPX CC DC 5-220 115/230 ● ● ● ● ■ ■ ■ 3

3 pha

se

inve

rter

s

Invertec® V270-T CC DC 5-270 400 ● ● ● ■ 2

Invertec® V270-TP CC DC 5-270 400 ● ● ● ● ■ 2

Invertec® V270-TP 2V CC DC 5-270 230/400 ● ● ● ● ■ ■ 2



Aspect® 300 CC AC/DC 2-300 230/400 ● ● ● ● ■ ■ ■ ■ 3

ASPECT® 300The TIG AC/DC new aspect!

rev.: E-GTAW01-EN-25-09-17

TIG WELDERS


DC Inverter






Invertec® V205-TP-2V K12021-1 230/400V/1Ph 5-200 200A/28V/35%

170A/26.8V/100% 35/20 16.2 385 x 215 x 480 IP23S / H

OUTPUT

OUTPUT

INPUT

INPUT

Features• Smart switching 230/400V single phase.• HF and Lift TIG ignition.• HIGH speed PULSE to adjust the arc focus, reduce distortion and

increase travel speed.• Excellent arc characteristics for rutile, basic and cellulosic

electrodes up to 4.0 mm.• Fan as needed (F.A.N.™) built-in reduces power and the intake of

dust and fumes.

The Invertec® V205-T-Pulse is manufactured in a lightweight but robust outer casing, making it portable and ideal for operation, even in the most hazardous environments.The smart switching 230/400V single phase allows it to be utilised anywhere on site and workshops. It features HF TIG ignition, Lift TIG ignition, 2 or 4 step, variable down slope and postflow control, a digital pre-set meter with a Hold function and built-in Variable Pulse.

Smart switching, full flexibilityInvertec® V205-TP-2V Processes

StickLift TIG / TIG HFTIG Pulse

Recommended Consumables• Steel LNT 25, LNT 26, LNT Ni1, LNT 19

• Stainless steel LNT 304L, 316L, 309LSi

Unit Includes• 2 m input cable• Carrying strap• Gas connection kit

Key Options • KIT-200A-25-3M Cable Kit 200A – 25 mm² – 3 m • KIT-200A-35-5M Cable Kit 200A – 35 mm² – 5 m • GRD-200A-35-xM Ground cable 200A – 35 mm² – 5/10 m • K10529-17-x TIG torch LTP 17 G – 140A – 4/8 m • K10529-20-x TIG torch LTP 20 W – 220A – 4/8 m • K10095-1-15M Remote control – 15 m • K12031-1 Water cooler COOL ARC® 20 • K10420-1 Coolant Acorox (2x5l) • W0200002 Undercarriage

Mod

e

Pola

rity

Out

put

Rang

e(A

mps

)

Volt

age

(V)

Stic

k

Lift

TIG

TIG

HF

TIG

PULS

E

Auto

rec

onne

ct

Pow

er F

acto

r Co

rrec

tion

(PFC

)

Vari

able

AC

freq

Mem

ory

Met

ers

War

rant

y (y

ears

)

OUTPUT INPUT PROCESS FEATURES

LINCOLN ELECTRIC 2



N

DC Inverter

Features• Excellent arc characteristics for a wide range of applications.• Generator compatible, ideal for site use.• HF and Lift TIG ignition.• Fully functional user-friendly control panel for easy setup of

welding parameters.• HIGH speed PULSE to adjust the arc focus, reduce distortion

and increase travel speed (TP models).• Fan as needed (F.A.N.™) built-in reduces power and the intake

of dust and fumes.

Designed and Engineered for DurabilityThe Invertec® V270-T/TP is manufactured in a lightweight but robust outer casing, making it portable and ideal for operation, even in the most hazardous environments. It features HF TIG ignition, Lift TIG ignition, 2 or 4 step, variable down slope and postflow control, a digital preset meter with a hold function and built-in Variable Pulse (for TP models). 2V models can be connected both to 115V AC and 230V AC supply. It can be simply changed to a water cooled unit by adding the COOL ARC® 20 Water Cooler.

Invertec® V270-T & TP Processes• Stick• Lift TIG / TIG HF• TIG Pulse (V270-TP)


LNT 25, LNT 26, LNT Ni1, LNT 19• Stainless steel

LNT 304L, 316L, 309LSi

Unit Includes• 2 m input cable• Carrying strap• Gas connection kit

Key Options • KIT-200A-25-3M Cable Kit 200A – 25 mm² – 3 m • KIT-200A-35-5M Cable Kit 200A – 35 mm² – 5 m • GRD-200A-35-xM Ground cable 200A – 35 mm² – 5/10 m • K10529-26-x TIG torch LTP 26 G – 180A – 4/8m • K10529-20-x TIG torch LTP 20 W – 220A – 4/8m • K10529-18-x TIG torch LTP 18 W – 320A – 4/8m • K10095-1-15M Remote control – 15 m • K12031-1 Water cooler COOL ARC® 20 • K10420-1 Coolant Acorox (2x5l) • W0200002 Undercarriage

LINCOLN ELECTRIC 2



N



Current Range (A) Rated Output Fuse Size

(A) (slow)Weight (kg)



Invertec® V270-T K12023-1400V/3Ph

5-270 270A/30.8V/35%200A/28V/100%

2015.2 385 x 215 x 480 IP23S / HInvertec® V270-TP K12024-1

Invertec® V270-TP-2V K12024-3 230/400V/3Ph 35/20

rev.: E-GTAW02-EN-25-09-17

TIG WELDERS


DC Inverter

Professional TIG welders for tough conditions

Invertec® 170TX & TPXInvertec® 220TPX



Current Range (A) Rated Output (TIG) Fuse Size (A)

(slow)Weight (kg)



Invertec® 170TX K12054-1 230V/1Ph 5-170 170A/16.8V/35%

130A/15.2V/100%16

12

328 x 212 x 465 IP23 / HInvertec® 170TPX K12055-1

Invertec® 220TPX K12057-1 115/230V/1Ph 2-220 220A/18.8V/25%150A/16V/100% 13

Features• Advanced inverter technology for superior TIG performance.• Full function user-friendly control panel layout with graph and a numeric display make it easy to set all

welding parameters.• Rugged construction: electrical safety (IP23), potted PC boards and optimum airflow reduce

contamination to extend the equipment's life in the harshest environmental conditions.• HF and Lift TIG ignition meeting all requirements.• Perfect TIG HF starting with pre-settable stating mode.• Complete TIG parameters setting: Pulse TIG with variable frequency that allows the welder to adjust the

arc focus to suit the applications, 10 memory location for personalized welding setting, TIG Spot welding (170TPX, 220TPX).

• PFC (Power Factor Correction) advantages: 30% more output current with the same input current, suitable for 115-230V (+15%-10%) single phase, low current consumption, energy saving, low current harmonics and reduction of the total CO₂ produced by the welding process (220TPX).

The Invertec® 170TX, 170TPX and 220TPX TIG and Stick welders combine a rugged industrial construction with excellent arc characteristics. They are full function DC TIG inverters with excellent arc control and perfect Arc Start in any welding conditions. All the machines have been designed, not only as a TIG welder, but to also operate as a stick welder with a variety of popular stick electrodes. Their portable rugged design makes them ideal for both in shop or field use. The Invertec® 170TX is the base model with basic TIG and Stick functions. The Invertec® 170TPX has additional features including Pulse TIG, 10 memory locations, TIG Spot welding for improved TIG welding performances. The Invertec® 220TPX includes all the same features and advantages as the Invertec 170TPX model with the addition of Power Factor Correction (PFC) circuitry that allows TIG welding UP to 220A with 16A single phase input voltage. All the machines are designed to operate on engine driven generators.

Processes• Stick• Lift TIG / TIG HF• TIG Pulse

(170TPX, 220TPX)



Unit Includes• 2 m input cable• Gas connection kit

Key Options • KIT-200A-25-3M Cable Kit 200A – 25 mm² – 3 m • KIT-200A-35-5M Cable Kit 200A – 35 mm² – 5 m • KIT-250A-35-5M Cable Kit 250A – 35 mm² – 5 m • GRD-200A-35-xM Ground cable 200A – 35 mm² – 5/10 m • K10529-17-x TIG torch LTP 17 G – 140A – 4/8m • K10529-26-x TIG torch LTP 26 G – 180A – 4/8m • K10529-20-x TIG torch LTP 20 W – 220A – 4/8m • K870 Foot Amptrol • K14147-1 Remote control – 15 m • K14148-1 Extension for remote control 15m

OUTPUTINPUT

LINCOLN ELECTRIC 3



N

rev.: E-GTAW03-EN-17-10-16

TIG WELDERS


DC Inverter

LINCOLN ELECTRIC 3



N

Industrial TIG welders for tough conditions

Invertec® 300TPXInvertec® 400TPX

Processes• Stick• Lift TIG / TIG HF• TIG Pulse




Key Options • KIT-250A-35-5M Cable Kit 250A – 35 mm² – 5 m • KIT-300A-50-5M Cable Kit 300A – 50 mm² – 5 m • KIT-400A-70-5M Cable Kit 400A – 70 mm² – 5 m • GRD-300A-50-xM Ground cable 300A – 50 mm² – 5/10 m • K10529-26-x TIG torch LTP 26 G – 180A – 4/8m • K10529-20-x TIG torch LTP 20 W – 220A – 4/8m • K10529-18-x TIG torch LTP 18 W – 320A – 4/8m • K10095-1-15M Remote control – 15 m • K14103-1 Water cooler COOL ARC® 21 (300TPX) • K14105-1 Water cooler COOL ARC® 46 (400TPX) • K10420-1 Coolant Acorox (2x5l) • K14114-1 Cart ST/TPX (300TPX) • K14129-1 Cart TPX (400TPX) • K14115-1 Tool box

The Invertec® 300 and 400TPX have been manufactured in a light-weight but robust outer casing, making them portable and ideal for operation even in the most hazardous environments. These machines feature HF TIG ignition, Lift TIG ignition, 2 or 4 step, variable down slope, post-flow control, digital pre-set meters with hold functions and built-in variable Pulse. Unique pre-settable starting mode allows excellent HF arc start in any welding conditions. Both machines are equipped with ten memory slots allowing for setting of personal welding parameters and procedures. TIG Spot welding mode completes the extensive list of TIG welding features. Both machines have been designed, not only as a TIG welder, but to also operate as a stick welder with a variety of popular stick electrodes including Cellulosic. They can be simply converted to a water-cooled unit by adding the COOLARC® 21 (300TPX) or COOLARC® 46 (400TPX) water-coolers. Robust, stable and well equipped carts are available for easy movement of the units.

Features• Advanced inverter technology for superior TIG performance.• Full function user-friendly control panel layout with graph and a numeric display make it easy to set all

welding parameters.• Rugged construction: electrical safety (IP23), potted PC boards and optimum airflow reduce contamination

to extend the equipment's life in the harshest environmental conditions.• HF and Lift TIG ignition meeting all requirements.• Perfect TIG HF starting with pre-settable stating mode.• Complete TIG parameters setting: Pulse TIG with variable frequency that allows the welder to adjust the

arc focus to suit the applications, 10 memory location for personalized welding setting, TIG Spot welding.• Water coolers and Carts available






Invertec®300TPX K12060-1

400V/3Ph

5-300 300A/22V/40%220A/18.8V/100%

16

22 349 x 247 x 502

IP23S / HInvertec®400TPX K12043-1 5-400 400A/26V/35%

300A/22V/100% 37 455 x 301 x 632

OUTPUTINPUT

rev.: E-GTAW04-EN-17-10-16

TIG WELDERS


AC/DC Inverter

The TIG AC/DC new aspect!ASPECT® 300

Features• Advanced inverter technology for superior TIG performance.• Superb welding characteristics with TIG DC, TIG AC and Stick welding processes.• Adjustable cleaning and penetration for perfect aluminium welding.• Variable AC frequency (40-400Hz) for control of travel speed and penetration.• Full function user-friendly control panel layout with graph and a numeric display make it easy to set all

welding parameters.• Rugged construction: electrical safety (IP23), potted PC boards and optimum airflow reduce contamination

to extend the equipment's life in the harshest environmental conditions.• PFC (Power Factor Correction) advantages: 30% more output current with the same input current, suitable

for 230-400V (+15%-10%) three phase, low current consumption, energy saving, low current harmonics and reduction of the total CO₂ produced by the welding process.

• Water coolers and Carts available.

ASPECT® 300 is an industrial AC/DC TIG welding machine designed and manufactured using the latest inverter digital technology. This machine has been designed and built to perform in the most hazardous environments at high outputs: 300A at 35% duty cycle both in TIG AC and TIG DC application. The controller provides all the features you would expect from industrial AC/DC TIG inverter welding machines combined with a user-friendly front panel layout, setting advanced TIG parameters has never been so simple! The top class features like the 2A minimum current, the multiple AC mode selection (including four different wave shapes), the optimized TIG start with adjustable electrode type and HF polarity, makes the unit the right choice to suit any application. It can be simply changed to water-cooled by adding the COOL ARC® 46 Water Cooler. A robust, stable and well equipped cart is available for easy movement of the unit.

Processes• Stick DC, Stick AC• TIG DC, TIG AC• Lift TIG, TIG HF• TIG Pulse


• Stainless steel LNT 304L, 316L, 309L

• Aluminium SuperGlaze®


Key Options • KIT-300A-50-xM Cable Kit 300A – 50 mm² – 5 /10m • E/H-300A-50-xM Electrode holder 300A – 50 mm² – 5 /10m • GRD-300A-50-xM Ground cable 300A – 50 mm² – 5/10 m • K10529-26-x TIG torch LTP 26 G – 180A – 4/8m • K10529-18-x TIG torch LTP 18 W – 320A – 4/8m • K10529-18SC-8 TIG torch LTP 18 W SC – 400A – 8m • KP10516-11 Accessory kit LT17/18/26 – 1.6-2.4 mm • KP10516-12 Accessory kit LT17/18/26 – 2.4-3.2 mm • K870 Foot Amptrol • K14147-1 Remote control – 15 m • K14148-1 Extension for remote control 15 m • K14105-1 Water cooler COOL ARC® 46 • K10420-1 Coolant Acorox (2x5 l) • K14129-1 Cart TPX

OUTPUTINPUT







ASPECT® 300 K12058-1 230/400V/3Ph 2-300 300A/22V/35%200A/18V/100% 32/20 43 455 x 301 x 632 IP23 / H

LINCOLN ELECTRIC 3



N

rev.: E-GTAW05-EN-17-10-16

TIG WELDERS


17

Accessories

• KIT-140A-16-3M (140A – 16 mm² – 3 m)

• KIT-140A-25-5M (140A – 25 mm² – 5 m)

• KIT-200A-25-3M ( 200A – 25 mm² – 3 m)

• KIT-200A-35-5M ( 200A – 35 mm² – 5 m)

• KIT-250A-35-5M ( 250A – 35 mm² – 3 m)

• KIT-300A-50-5M ( 300A – 50 mm² – 5 m)

• KIT-400A-70-5M (400A – 70 mm² – 5 m)

• GRD-200A-35-5M ( 200A – 35 mm² – 5 m)

• GRD-200A-35-10M ( 200A – 35 mm² – 10 m)

• GRD-300A-50-5M ( 300A – 50 mm² – 5 m)

• GRD-300A-50-10M ( 300A – 50 mm² – 10 m)

• GRD-400A-70-10M (400A – 70 mm² – 10 m)

• GRD-400A-70-15M (400A – 70 mm² – 15 m)

• GRD-600A-95-10M (600A – 95 mm² – 10 m)

ACCESSORY KITSCable kits (ground/electrode)with ground cable & electrode holder (clamp)Item n°:

Cable kits (ground)Item n°:

REMOTE CONTROLS

UNDERCARRIAGES

• 1 potentiometer, 6-pins, 15 mItem n°:K10095-1-15M

• Foot Amptrol, 6-pins, 7.6 mItem n°:K870

• Undercarriage with gas cylinder platform, delivered as a kit, for use with 400TPX, Aspect 300

Item n°: K14129-1

• Undercarriage with gas cylinder platform delivered as a kit, for use with 300TPX

Item n°: K14114-1

• 2-wheeled cart, delivered as a kit, for use with V205-TP and V270-TP

Item n°: W0200002

TIG TORCHES

WATER COOLERSCOOL ARC® 20for use with V205/V270 Item n°: K12031-1

Coolant ACOROX( 2x5l) Item n°: K10420-1

COOL ARC® 21for use with 300TPX Item n°: K14103-1

COOL ARC® 46for use with 400TPX/ASPECT 300Item n°: K14105-1

TIG TORCHESThe Linc Torch Premium (LTP) range is enhancing our current range of TIG torches, providing even better performance for the welder’s comfort. Designed to meet the challenges of a variety of applications in maintenance, fabrication or construction sites, the new torches are offered in both air-cooled and water-cooled version.

Air cooled

LT 17 G / LTP 17 G / 140A DC-100A AC @ 35%STANDARD RANGE

LT 17 G 4M Ergo K10513-17-4LT 17 G 8M Ergo K10513-17-8LT 17 G 4M Lever K10513-17-4F

PREMIUM RANGE

LTP 17 G 4M Ergo K10529-17-4LTP 17 G 8M Ergo K10529-17-8LTP 17 G 4M Valve Conn. 10-25 K10529-17-4VSLTP 17 G 4M Valve Conn. 35-50 K10529-17-4VLTP 17 G 8M Valve Conn. 35-50 K10529-17-8VLTP 17 G 8M Lever K10529-17-8F

LT 26 G / LTP 26 G / 180A DC-130A AC @ 35%STANDARD RANGE

LT 26 G 4M Ergo K10513-26-4LT 26 G 8M Ergo K10513-26-8LT 26 G 4M Lever K10513-26-4FPREMIUM RANGE

LTP 26 G 4M Ergo K10529-26-4LTP 26 G 8M Ergo K10529-26-8LTP 26 G 12M Ergo K10529-26-12LTP 26 G 4M Ergo Flex K10529-26-4XLTP 26 G 8M Ergo Flex K10529-26-8XLTP 26 G 4M Valve Conn. 35-50 K10529-26-4VLTP 26 G 8M Valve Conn. 35-50 K10529-26-8VLTP 26 G 8M Lever K10529-26-8F

Water cooled

LT 20 W / LTP 20 W / 220A DC-165A AC @ 100%STANDARD RANGE

LT 20 W 4M Lever K10513-20-4FPREMIUM RANGE

LTP 20 W 4M Ergo K10529-20-4LTP 20 W 8M Ergo K10529-20-8LTP 20 W 8M Lever K10529-20-8F

LT 18 W / LTP 18 W / 220A DC-165A AC @ 100%STANDARD RANGE

LTP 18 W 4M Ergo K10513-18-4LTP 18 W 8M Ergo K10513-18-8LTP 18 W 8M Lever K10513-18-8FPREMIUM RANGE

LTP 18W 4M Ergo K10529-18-4LTP 18W 8M Ergo K10529-18-8LTP 18W 4M Ergo Flex K10529-18-4XLTP 18W 8M Ergo Flex K10529-18-8XLTP 18W 8M Lever K10529-18-8F

LTP 18 W SC / 400A DC-280A AC @ 100%PREMIUM RANGE

LT 18 W SC 4M Ergo K10529-18-8

QUALITY MAKES THE DIFFERENCE

STICK WELDERS


MIG & FLUX-CORED WELDERSRecommended for industrial job shops and manufacturing applicationsOptimized for CV processesDesigned for use with a variety of wire feeders


CV-425, CV-510High Output. Reliable Workhorses!

Powertec® 305S, 365S, 425S, 505SPowerful potential

Powertec® 255C, 305CPowerful compact, excellent economics

Powertec® 305C, 355C, 425C PROPremium arc, synergic style

Powertec® 161C, 191C, 231C, 271CThe Professional’s Choice

Handy MIGSuperbly simple, powerfully portable

MIG

Pac

kage

s

MIG

Com

pact

MIG

Com

pact

MIG Flux-Cored Welders

WIRE FEEDERS


Mod

e

Pola

rity

Out

put

Rang

e (A

)

Volt

age

(V)

MIG

Flux

Cor

ed

nb s

teps

Dri

ve r

olls

WFS

(m/m

in)

War

rant

y (y

ears

)


MIG Packages

MIG Compact

Handy MIG CV DC 45-80 230 ● ● 2 1-20 3

Weld Pak™ 2000 CV DC 20-180 230 ● ● 2 1-20 2

Powertec® 161C CV DC 30-150 230 ● ● 7 2 1-17 3

Powertec® 191C CV DC 30-180 230 ● ● 8 2 1-20 3

Powertec® 231C CV DC 30-220 230 ● ● 12 2 1-20 3

Powertec® 271C CV DC 30-255 230 ● ● 12 2 1-20 3

Powertec® 255C CV DC 25-250 230/400-400

● ● 20 4 1-20 3

Powertec® 305C CV DC 30-300 ● ● 30 2/4 1-20 3

Powertec® 305C PRO CV DC 30-280

230/400

● ● 30 4 1-20 3

Powertec® 355C PRO CV DC 30-350 ● ● 30 4 1-20 3

Powertec® 425C PRO CV DC 30-420 ● ● 30 4 1-20 3

Powertec® 305S CV DC 30-300

230/400-220/380/440

● ● 20 - - 3

LF22-M,LF24-M,

LF24-M PRO

Powertec® 365S CV DC 30-350 ● ● 30 - - 3

Powertec® 425S CV DC 30-420 ● ● 30 - - 3

Powertec® 505S CV DC 30-500 ● ● 30 - - 3

CV425 CV DC 10-420 ● ● - - - 3LF33S, LF33

CV510 CV DC 10-500 ● ● - - - 3

Weld Pak™ 2000Smart, multi-process, compact

rev.: E-GMAW01-EN-17-10-16


Processes• MIG• Flux-cored (innershield)

Recommended Consumables• Steel Ultramag®, Supramig®, Supramig Ultra®

• Flux-cored Innershield® NR211-MP

Unit Includes• Input cable• MIG gun• Drive rolls• 0.5 kg solid wire • Kit of welding accessories

Key Options • B10241-1 MIG gun

Compact, portable and lightweight wire feed welders plug into a 230V, 16 amps outlet. These machines are ideally suited to the light maintenance and repair such as the small garage works and jobs around the farm. Four voltage settings and continuous wire feed speed adjustment allow to weld light gauge mild steel. Easy to get started, since practically everything you will need to weld is included – gun and cable assembly, work cable & clamp, spool of solid wire, contact tips and hand shield with filter plate and lens. Also a chipping hammer/brush, so you can use your Handy MIG to weld straight away.

Superbly simple, powerfully portableHandy MIGMIG FLUX-CORED WELDERS MIG Compact






Handy MIG K14000-1 230V/1Ph 45-80 70A/17.5V@20% 16 18 345 x 220 x 455 IP21 / H

INPUT OUTPUT

Features• Suitable for the welding of most thin sheet steel applications.• Connects to 230V, 16 amps outlet.• Safe operation – no electrical current until trigger is pressed.• Compact, portable, lightweight and easy to use.• Ideal for general light maintenance projects.• Continuous wire feed speed adjustment and four selectable voltage steps for precise control.• Fan-cooled or expectancy.• Supplied ready to weld.

Compact Inverter

INPUT

OUTPUT

Processes • MIG• Flux-cored

(Innershield)• Stick


Ultramag®, Pantafix®, Omnia®46, Baso® G


Unit Includes• 3 m input cable• Work lead, 4m• Gas hose, 2m• MIG gun, 3m

Key Options • K10429-15-xM MIG gun LGS 150 G – 150A – 3/4/5 m • K10429-25-xM MIG gun LGS 250 G – 200A – 3/4/5 m

• E/H-200A-25-3M Electrode holder, 200A – 25 mm² – 3 m • KP14016-x Drive roll kit range (2R) • K10158-1 Readi-reel mounting stand (15 kg)

Features• Superior arc behaviour with premium starting

performance and arc stability• User friendly User Interface with step-less controlled

output current• Easy to change polarity• Professional wire feeding system

Smart, multi-process compact

The Weld PAK™ 2000 is a completed multi-process DC voltage arc welding machine. It is ideally suited to weld thin sheet metal and for repair and maintenance works. It’s perfect tool for light Steel applications. This compact can be easy movable. You need only plug the welder into 230 V outlets. It is recommended for MIG/MAG applications (including Stainless Steel), for Innershield gasless flux cored arc welding and also for Stick application with Rutile and Basic electrodes. The Weld PAK™ 2000 is designed to feed wire from 0.6 mm to 1.1 mm (steel, stainless steel and flux-cored) on B300 and S200 spools. A quality welding performance depends on a quality wire drive system. For this reason we have equipped the Weld PAK with professional feeder with large rolls.The Weld PAK™ 2000 has been designed to meet Lincoln's standards of performance and reliability. As a result we confidently provide a Lincoln two-year warranty on parts and labour.

Weld Pak™ 2000






Protection Class

Weld Pak™ 2000 K14134-1 230V/1Ph 20-180 180A/23V/20% 25 27.5 600 x 280 x 800 IP23

LINCOLN ELECTRIC 2



N

LINCOLN ELECTRIC 3



N

rev.: E-GMAW02-EN-17-10-16


MIG FLUX-CORED WELDERS MIG Compact

OUTPUTINPUT







Powertec® 161C K14040-2

230V/1Ph

30-150 150A/21.5V/20% 16 53 615 x 390 x 825

IP23 / HPowertec® 191C K14045-1 30-180 180A/23.0V/20% 20 70

765 x 427 x 850Powertec® 231C K14046-1 30-220 220A/25.0V/20% 25 80

Powertec® 271C K14047-1 30-255 255A/26.8V/20% 32 83

* “- 2” include A/V meter installed

Features• Superior arc behaviour with premium starting performance and arc stability.• Excellent control, with Burnback control, Spot welding function, 2/4 stroke feature (except PT161C) and

additional voltage settings.• Optional volt and ammeter (except PT161C).• Easy to change polarity.• Professional wire feeding system.• Equipped with Euro connector and ground cable assembly.

The Powertec® 161C, 191C, 231C and 271C are all designed to provide a range of machines with a variety of welding outputs suitable for operating from a single-phase mains supply. The Powertec® range begins with the 161C, which is ideal for the welding of thin sheet metal applications, repair and maintenance works. This machine has excellent arc and starting characteristics, allowing you to complete your welding project efficiently, quickly and professionally with minimal spatter levels.It is a perfect tool for small workshop, car body repair or for the farm. The Powertec® 191C and 231C have the power required for light construction applications, yet still offer the flexibility to weld thin material like the Powertec® 161C. The Powertec® 271C truly is the multi-purpose model in this range, ideal for both welding thin material and also light to medium construction work.

The Professional’s ChoicePowertec® 161C, 191C, 231C, 271C Processes

• MIG• Flux-cored



Unit Includes• 3 m input cable and 3 m ground cable

Key Options • K10429-15-xM MIG gun LGS 150 G – 150A – 3/4/5 m • K10429-25-xM MIG gun LGS 250 G – 200A – 3/4/5 m • K10429-36-xM MIG gun LGS 360 G – 300A – 3/4/5 m • KP14016-x Drive roll kit range (2R) • K10158-1 Readi-reel mounting stand (15 kg) • K14044-1 Meter V/A kit (except PT161C) • K14048-1 CO₂ heater connection kit (except PT161C)

LINCOLN ELECTRIC 3



N

rev.: E-GMAW03-EN-27-12-17

STICK WELDERS


OUTPUTINPUT

Processes• MIG• Flux-cored

Recommended Consumables• Steel Ultramag® , Supramig®, Supramig Ultra®



Unit Includes• Undercarriage• 5 m-input cable• Work clamp and cable assembly

(3 m)• Gas hose (2 m)• Drive roll kit

Key Options • K10429-25-xM MIG gun LGS 250 G – 200A – 3/4/5 m • K10429-36-xM MIG gun LGS 360 G – 300A – 3/4/5 m • KP14016-x Drive roll kit range (2R) • KP14017-x Drive roll kit range (4R) • K10158-1 Readi-reel mounting stand (15 kg) • K14077-1 Kit polarity change PT255C/305C • K14049-1 Meter kit • K14009-1 CO₂ heater connection kit

MIG Compact






Powertec® 255CK14055-1 400V/3Ph

25-250 250A/26.5V/35%16

94

810 x 467 x 930 IP23 / HK14055-2 230/400V/3Ph 32/16

Powertec® 305CK14056-1 & -3 400V/3Ph

30-300 300A/29V/35%225A/25.2V/60%

2595

K14056-2 & -4 230/400V/3Ph 40/25

Features• Products developed with a focus on applications.• Excellent starting performance (stable and dynamic).• Voltage selectors with multiple steps for precise adjustment.• Excellent drive system with large diameter drive roll.• Electronic feedback system on the wire drive will guarantee consistent wire feed speed.• Equipped with large diameter wheels, push/pull bar and lifting eyes for full manoeuvrability.• Optional Volt Ammeter kit and polarity change kit.

Powertec® 255C, 305CPowerful compact, excellent economicsThe design of the Powertec® 255C and 305C was driven by the need to provide our customers with a range of machines offering a variety of welding outputs. The range begins with the 255C, which is an ideal machine for welding of thin sheet metal applications. With excellent arc and starting characteristics this machine allows welding projects to be completed efficiently, quickly and professionally with minimal spatter levels. The Powertec® 255C is a more powerful version, still capable of welding thin material but with the extra power required for light fabrication work. The Powertec® 305C truly is a multi-purpose model, ideal for both thin sheet applications and light to medium fabrication work. The Powertec® 305C will operate in either Short Arc welding or Full Spray modes with a 1.0 mm wire.

MIG FLUX-CORED WELDERS

LINCOLN ELECTRIC 3



N

rev.: E-GMAW04-EN-27-12-17

STICK WELDERS




Ultramag®, Supramig®, Supramig Ultra®

• Flux-cored Innershield® NR211-MP, Outershield® MC710-H

• Stainless steel LNM 304L, 316L, 309LSi


Unit Includes• Undercarriage• 5 m-input cable• Work clamp and cable assembly (3 m)• Gas hose (2 m)• Drive roll kit

Key Options • K10429-25-xM MIG gun LGS 250 G – 200A – 3/4/5 m • K10429-36-xM MIG gun LGS 360 G – 300A – 3/4/5 m • K10429-505-xM MIG gun LGS 505 W – 450A – 3/4/5 m • KP14017-x Drive roll kit range (4R) • K10158-1 Readi-reel mounting stand (15 kg) • K14071-1 DR system kit (grill) • K14009-1 CO₂ heater connection kit (except PT 305C) • K14037-1 Water cooler COOL ARC® 25 • K10420-1 Coolant Acorox (2x5l) (PT425C only)

MIG Compact

Features• Products developed with a focus on applications.• Superb Arc behaviour with Argon Mix and 100% CO₂.• Excellent drive system (4 rolls) with large diameter drive roll and powerful motor.• Electronic feedback system on the four-roll wire drive will guarantee consistent wire feed speed.• Voltage selectors with multiple steps for precise adjustment.• Synergic control to support easy control by the welder.• Bright digital Volt and Ammeter.• Completed with an extensive set of features.• Large diameter wheels, push/pull bar and lifting eyes for full manoeuvrability.

Premium arc, synergic style

The Powertec® PRO range of MIG welding machines is superior in all respects. All have excellent arc characteristics and very low spatter levels with argon mix or 100% CO₂ shielding gas. The extensive set of features on all Powertec® Pro’s includes 2/4-step run-in, wire inch and gas purge. Two digital meters indicates clearly the welding voltage and amperage which when combined with the synergic control allows optimum and easy setting with controllability. Select the synergic control and voltage and the wire feed speed will then be adjusted automatically to suit. All machines come equipped with a rugged four-roll drive system with a powerful 90 watt motor. The machines also have a lower cylinder platform, allowing easy loading and unloading of the gas cylinder.

Powertec® 305C PRO, 355C PROPowertec® 425C PRO



Product Item Number

Primary Voltage (50-60Hz)

Current Range (A)

Rated Output Fuse Size (A) (slow)

Weight (kg)


Protection / Insulation Class

Powertec® 305C PRO K14057-1

230/400V/3Ph

30-280 280A/28V/40%230A/25.5V/60% 32/20A 145 890 x 565 x 1060

IP23 / HPowertec® 355C PRO K14058-1 30-350 350A/31.5V/40%

285A/28.2V/60% 40/25A 147890 x 690 x 1060

Powertec® 425C PRO K14059-1A 30-420 420A/35V/40%

345A/31.3V/60% 50/32A 162

OUTPUTINPUT

LINCOLN ELECTRIC 3



N

rev.: E-GMAW05-EN-27-12-17


Features• Products developed with a focus on applications.• Superb Arc behaviour with Argon Mix and 100% CO₂.• Voltage selectors with multiple steps for precise

adjustment.• Two choke tabs to support superb Arc behaviour• Fan as needed (F.A.N.™).• Synergic control to support easy control by

the welder with LF24M Pro.

With the full range of Powertec® power sources and the LF22M & 24M (Pro) wire feeders, Lincoln is able to offer you unrivalled choice of step voltage MIG machines. With multiple output levels available across the power source range; 2 or 4 roll feeders with or without meters and a variety of interchangeable features, the choice is huge: there are 12 different combinations which give the Powertec® range unparalleled flexibility. Design of the LF22M, 24M and 24M Pro feeders focused on ruggedness, physical dimensions and ease of use. The result is an incredibly rugged casing with the primary controls on the exterior and secondary controls secure within the protective casing close to the wire drive.

Powerful potentialPowertec® 305S, 365S, 425S, 505S

MIG PackagesMIG FLUX-CORED WELDERS




(slow)Weight (kg)



Powertec® 305S K14060-1 230/400V/3Ph 30-300 300A/29V@35%230A/25.5V@60% 32/20 94 770 x 467 x 930

IP23 / HPowertec® 365S K14061-1A

K14061-2A230/400V/3Ph220/380/440/3Ph 30-350 350A/31.5V@40%

285A/28.2V@60% 40/25 141

875 x 700 x 1035Powertec® 425S K14062-1AK14062-2A

230/400V/3Ph220/380/440/3Ph 30-420 420A/35V@40%

345A/31.5V@60% 50/32 151

Powertec® 505S K14063-1AK14063-2A

230/400V/3Ph220/380/440/3Ph 30-500 500A/39V@40%

400A/34.5V@60% 63/40 157

OUTPUTINPUT

• Bright digital volt and ammeter with LF24M and LF24M Pro.

• Completed with an extensive set of features.• Large diameter wheels, push/pull bar

and lifting eyes.• Easy to convert to water-cooled by simply

adding the Coolarc 25 (except PT 305S).

Technical Specifications of Wire Feeders

Product Item Number Cooling Input Power WFS Range (m/min)

Wire Size Range (mm) Weight (kg)

Dimensions HxWxD (mm)Solid Cored

LF-22M K14064-1 A

34-44V AC 1-20 0.8-1.6 1.0-1.6

15

440 x 275 x 636LF-24M K14065-1W

A/W17

LF-24M PRO K14066-1W17






Unit Includes• Undercarriage• 5 m-input cable• Work clamp and cable assembly (3 m)

Recommended Packages• LF22M or LF24M or LF24M pro wire

feeder• Powertec® power source on

undercarriage, Input cable, Work clamp and cable assembly + COOL ARC® 25 for water cooled version

• 5 m-Interconnection cable, MIG gun and gas regulator

Key Options • K10347-PG(W)-xM Interconnection cables • K10429-25-xM MIG gun LGS 250 G – 200A – 3/4/5 m • K10429-36-xM MIG gun LGS 360 G – 300A – 3/4/5 m • K10429-505-xM MIG gun LGS 505 W – 450A – 3/4/5 m • K10158-1 Readi-reel mounting stand (15 kg) • K14071-2 DR system kit (grill) • K14009-1 CO₂ heater connection kit • K14037-1 Water cooler COOL ARC® 25 • K10420-1 Coolant Acorox (2x5l)

LINCOLN ELECTRIC 3



N

rev.: E-GMAW06-EN-27-12-17


CV-425 & CV-510

Features• Potted and encapsuled printed circuit board controls in separate dust free compartments.• Different feeders for construction and shipyards, all with meters, with or without synergy or memory;

just select the one of your choice.• Superb arc behaviour with argon mix and 100% CO₂.• Electronic feedback system on the wire drive will guarantee consistent wire feed speed.• Equipped with large diameter wheels, push/pull bar and lifting eyes for full manoeuverability.• Completed with an extensive set of features.

The CV-425 and CV-510 are industrial power sources designed for heavy duty applications. Both power sources meet IP23 protection which means that they will operate in the most arduous environmental conditions experienced, in such places as shipyards or offshore yards. The machines have been designed so that all the sensitive components are enclosed in a compartment free from dust and separated from the air-flow needed to cool the machine. The PCB within the machines is completely encapsulated which will provide maximum protection from the elements. Both the CV-425 and CV-510 power sources are tested at +40°C and rated at 60% duty cycle. As a result of this rigorous testing and specifications, it allows these machines to operate and weld in any environment at a 100% duty cycle. Like all Lincoln machines the CV-425 and 510 are designed with the application in mind.

High Output. Reliable Workhorses!

MIG PackagesMIG FLUX-CORED WELDERS




(slow)Weight (kg)



CV-425K14080-1A 230/400V/3Ph

10-420 420A/35V/60%325A/30.3V/100%

63/32A152

880 x 696 x 1020 IP23 / HK14080-2A 220/380/440V/3Ph 63/32/32A

CV-510K14081-1A 230/400V/3Ph

10-500 500A/39V/60%325A/33.3V/100%

63/40A160

K14081-2A 220/380/440V/3Ph 63/32/32A

OUTPUTINPUT






Unit Includes• Undercarriage• 5 m-input cable• Work clamp and cable assembly

(3 m)

Recommended Packages• LF-33 wire feeder 4-roll, 1.0-1.2 mm

drive roll• CV425 or CV510 power source on

undercarriage, Input cable, Work clamp and cable assembly + COOL ARC® 25 for water cooled version


Key Options • K10429-36-xM MIG gun LGS 360 G – 300A – 3/4/5 m • K10429-505-xM MIG gun LGS 505 W – 450A – 3/4/5 m • K10158-1 Readi-reel mounting stand (15 kg) • K14037-1 Water cooler COOL ARC® 25 • K10420-1 Coolant Acorox (2x5l) • K14009-1 CO₂ heater connection kit • K14071-2 DR system kit (grill) • K14082-1 Kit A/V meter • K14152-1 Lincoln Analog-Digital Interface


Product Item Number Cooling Input Power WFS Range (m/min)



LF-33 K14030-1WA/W 34-44V AC 1-20 0.8-1.6 1.0-1.6

17 440 x 275 x 636

LF-33S K14051-1 12 350 x 195 x 530

LINCOLN ELECTRIC 3



N

rev.: E-GMAW07-EN-27-12-17

STICK WELDERS



• K10347-PG-xM(air cooled)

• K10347-PGW-xM(water cooled)

• K14049-1 A/V meter kit Powertec C • K14073-1 A/V meter kit LF22m • K14071-1 Kit grill Powertec C PRO • K14071-2 Kit grill Powertec S • K14077-1 Kit Polarity change Powertec 255C/305C

Interconnection cablesFast-mate (x2), gas hose, protection, (2.5, 5, 10, 15, 20, 25 & 30 m)

Item n°:

KitsItem n°:

WATER COOLERSCOOL ARC® 25Item n°:K14037-1

Coolant ACOROX( 2x5l) Item n°:K10420-1

Air cooled guns• LGS 150G, 150A @ 60%

K10429-15-xM 3 m, 4 m or 5 m• LGS 250G, 200A @ 60%

K10429-25-xM 3 m, 4 m or 5 m• LGS 360G, 300A @ 60%

K10429-36-xM 3 m, 4 m or 5 m

Water cooled guns• LGS 505W, 450A @ 100%

K10429-505-xM 3 m, 4 m or 5 m

DRIVE ROLL KITS2 rolls• KP14016-0.8 0.6-0.8 mm – solid wire• KP14016-1.0 0.8-1.0 mm – solid wire• KP14016-1.2 1.0-1.2 mm – solid wire• KP14016-1.1R 0.9-1.1 mm – cored wire• KP14016-1.6R 1.2-1.6 mm – cored wire• KP14016-1.2A 1.0-1.2 mm – aluminium wire

4 rolls• KP14017-0.8 0.6-0.8 mm – solid wire• KP14017-1.0 0.8-1.0 mm – solid wire• KP14017-1.2 1.0-1.2 mm – solid wire• KP14017-1.6 1.2-1.6 mm – solid wire• KP14017-1.1R 0.9-1.1 mm – cored wire• KP14017-1.6R 1.2-1.6 mm – cored wire• KP14017-2.4R 1.6-2.4 mm – cored wire• KP14017-1.2A 1.0-1.2 mm – aluminium wire• KP14017-1.6A 1.2-1.6 mm – aluminium wire

ACCESSORY KITS

Accessories

MIG GUNSLINC GUN™ rangeAs standard these guns come with an ergonomic grip, springs on both sides of the cable, retractable pins and a “rotating ball joint” at the end of the gun grip.

across a broad range of industry applicationsDelivering on our commitments of welding expertise

From the most technologically demanding to the most basic application, we help our customer find the best, most economical and productive solutions to meet the productivity and quality requirements specific to their individual needs.

rev.: E-GMAW08-EN-27-12-17

STICK WELDERS


MULTI-PROCESS WELDERSFor Heavy Manufacturing and FabricationOne Machine for Stick, TIG, Wire Welding and Arc GougingRuggedly Built for Tough Environments



Com

pact

Inve

rter

Inve

rter

Pow

er S

ourc

e

Multi-Process Welders

Speedtec® 405S, Speedtec® 505SHigh output, reliable industrial machine

Speedtec® 180C, Speedtec® 200C, Speedtec® 215CMany tasks, many locations

Flextec® 650XFlexible technologySM

Invertec® V350 PRODesign smart, Built tough

Mod

e

Pola

rity

Out

put

Rang

e (A

mps

)

Volt

age

(V)

MIG

Flux

-cor

ed

Stic

k

DC

TIG

Subm

erge

d Ar

c

Goug

ing

War

rant

y (y

ears

)


Inverter Power Source

Conventional Power Source

Compact Inverter

Speedtec® 180C CV DC 20-200 230 ● ● ● ▲ 2

Speedtec® 200C CV DC 20-200 115/230 ● ● ● ● 2

Speedtec® 215C CC/CV DC 20-200 115/230 ● ● ● ● 3

Speedtec® 405S CC/CV DC 20-400 400 ● ● ● ● ● 3

Speedtec® 505S CC/CV DC 20-500 400 ● ● ● ● ● 3

Invertec® V350 PRO CC/CV DC 5-425 200/220/380/415 ● ● ● ● ● 3

Flextec® 350X CE CC/CV DC 5-425 380/460/575 ● ● ● ● ● 3

Flextec® 650X CC/CV DC 10-815 380/460/575 ● ● ● ● ● ● 3

Idealarc® DC-400 CC/CV DC 60-500 230/400 ● ● ● ● ● ● 3

Adva

nced

Dev

ice

Inve

rter

Pow

er S

ourc

e – C

ross

Linc

Tec

hnol

ogy

Conv

entio

nal P

ower

Sou

rce

Arc Tracker™Portable, Powerful. Weld Performance Monitoring

Idealarc® DC-400Simple DC multi-process welding

Flextec® 350X CERugged Multi-Process Power Source for Maximum Flexibility

LACILincoln ArcLink Communication Interface

rev.: E-GMAW09-EN-25-09-17


MULTI-PROCESS WELDERS Compact Inverter

OUTPUTINPUT



Current Range (A)

Rated Output (GMAW)

Fuse Size (A) (slow) Weight (kg) Dimensions

HxWxD (mm)Protection/ Insulation Class

Speedtec® 180C K14098-1 230V/1Ph

20-200 200A/24V/25% 1617.3 396 x 246 x 527

IP23Speedtec® 200C K14099-1115/230V/1Ph

Speedtec® 215C K14146-1 42.0 780 x 400 x 750

Features• Compact and Robust, Innovative, Portable and Lightweight, Anyplace, Anywhere.• Multiple Tasks: Speedtec® 180C: CV MIG, FCW, Stick \ Speedtec® 200C/215C: CV MIG, CV Synergic, FCAW,

Stick, Lift TIG.• Power Factor Correction (PFC). More Welding Power, consumes 30% less energy than conventional

equipment, Generator Compatible.• User Friendly Operation: Icon control panel (Speedtec® 180C) Icon control colour TFT Interface screen

(Speedtec® 200C/215C).• Superior Arc Performance. CV MIG: Infinitely Variable Control of voltage, Wire Feed Speed and Inductance,

Stick: Hot Start and Arc Force Control, TIG: Lift TIG avoids Tungsten contamination.• Smart housing: 15kg spool capability, helpful shelves, 48% lower weight, compared to conventional MIG

equipment (Speedtec® 215C).

Many tasks, many locations

Speedtec® 180C Speedtec® 200C Speedtec® 215C

The SPEEDTEC® 180C, 200C & 215C are small but powerful single phase inverter based, multi-process machines. Lincoln Electric has constructed a fully professional machine packed with features, into a small light-weight compact housing maximising portability. These features make our range extremely versatile; they can be used for many different applications and can be easily moved around production facilities or transported to any location effortlessly. These units can be powered from the mains supply or are also suitable for use with motor generators. The SPEEDTEC® 180C, 200C & 215C units have been equipped with Power Factor Correction (PFC), a feature which supports high output welding current from a single phase 230V1Ph 50/60Hz supply allowing it to be used with a long (up to max 100m) primary extension cable. With electronically designed welding waveforms Lincoln Electric offers these multi-process units for MIG, Stick or TIG modes; it’s just a question of choosing the right model. The SPEEDTEC® 180C, 200C & 215C are ready to tackle many different welding applications. The welding per-formance gives excellent results for Steel, Stainless Steel and Aluminium (using 200mm dia. spools). The SPEEDTEC® 180C, 200C & 215C machines work perfectly with mixed gas and 100% CO₂ also with self-shielding wires (Innershield).

Processes• Stick• Flux-Cored• Lift TIG

(200C/215C)• MIG

Recommended Consumables• Steel Ultramag®

• Flux-cored Innershield® NR® 211-MP


Unit Includes• Input cable• Ground cable (3 m)• Gas hose (2 m)• Drive roll (0.8-1.0 mm)

Key Options • KP14016-x Drive roll kit • K10429-15-xM MIG gun LGS 150 G – 150A – 3/4/5 m • K10429-25-xM MIG gun LGS 250 G – 200A – 3/4/5 m • K10529-17-x TIG torch LTP 17 G – 140A – 4/8 m • K14114-1 Cart ST/TPX (180C/200C) • K14115-1 Tool box for Cart ST/TPX (180C/200C) • E/H-200A-25-3M Electrode holder, 200A – 25 mm² – 3 m • KIT-200A-25-3M Cable Kit 200A – 25 mm² – 3 m • K10158-1 Spool adapter for 15kg B300 (215C) • R-1019-125-1/08R Spool adapter for 5kg (215C)

LINCOLN ELECTRIC 2



N

LINCOLN ELECTRIC 3



N

180C200C

215C

180C200C 215C

rev.: E-GMAW10-EN-17-10-16


Inverter Power SourceMULTI-PROCESS WELDERS

INPUT OUTPUT

The Speedtec® range is the solution for Industrial Multi-process applications. With modular and compact design this welding set is easy to move around site. Transport is trouble free thanks to the lower weight of this new design. With the latest high frequency inverter technology, the arc is precisely controlled, many times faster than conventional analogue power sources. The electrical characteristics of the welding power can be changed by software in real time updates. A wide range of synergic programs are available as standard allowing simple yet precise control of welding parameters for the best results every time. The Speedtec® machines utilise the very latest power source technology for efficiency and lower energy consumption. Their advanced Inverter technology will save both time as well as energy. Driven by Lincol Electric’s Green Initiative, we aim to reduce the costs to you as well as the environment. These welding sets are available as 400A rated at 80% or 500A rated at 60% duty cycle (at 40°C). With the PF-46 wire feed unit the welding set can support the MIG processes with synergic programs for Steel, Stainless Steel, Aluminium and Flux cored wires. Lift TIG and Stick functions are available as standard.

High output, reliable industrial machine

Speedtec® 405SSpeedtec® 505S

Processes• MIG• Flux-Cored• Stick• Lift TIG• Gouging





Basic Unit Includes• Primary cable 5 m• Ground cable with clamp 3 m

Recommended Packages Include• PF-4X wire feeder • Speedtec® power source• COOL ARC® 46 for water cooled

version• Cart• 5 m-Interconnection cable,

MIG gun and gas regulator

Key Options • K10349-PG(W)-xM Interconnection cables • K10429-36-xM MIG gun LGS 360 G – 300A – 3/4/5 m • K10429-505-xM MIG gun LGS 505 W – 450A – 3/4/5 m • K14096-1 Cart Speedtec • K14141-1 Cart Dual • K14105-1 Water cooler COOL ARC® 46 • K10420-1 Coolant Acorox (2x5l) • K14130-1 LACI (Lincoln Arlink Communication Interface) • K14121-1 User Interface U2 • K14122-1 User Interface U4 • K14123-1 User Interface U6 • K14124-1 Pendant box (12-pins) • K14125-1 Kit 12-pin socket (F) • K14131-1 Arclink-T Flex • K14132-1 Adapter 5-pin(M)/12-pin(F) • K14135-1 Arclink-T-Power • K14120-1 Kit 6-pin socket (F) • Gas flow regulator



Current Range (A) Rated Output

Fuse Type rG or Circuit Breaker Type Z

Weight (kg)


Protection Class

Speedtec® 405S K14117-1400V/3Ph

20-400A 400A/34V/80% 32A50 535x300x635 IP23

Speedtec® 505S K14116-1 20-500A 500A/39V/60% 32A


Product Item Number Drive Roll Cooling Input

PowerOutput Power

WFS Range (m/min)



PF-41 K14163-1

4 A/W 40V DC 500A@60% 1.0-22 0.8-1.6 1.0-1.6

17

460 x 300 x 640PF-42 K14107-1 18

PF-44 K14108-118.5

PF-46 K14109-1

COMMUNICATIONS PROTOCOL

Features• Premium welding behaviour on CV MIG & Stick welding.• Variable inductance control.• Synergic capability.• Job control with limits secured by a password (PF-46).• Continuous control of wire feed Speed and voltage.• Remote control on the gun (PF-46 & optional for PF-44).• Pre-setting (PF-41 excl.) & Multi procedure (PF-46).

LINCOLN ELECTRIC 3



N

rev.: E-GMAW11-EN-27-12-17

Processes• MIG• Flux-cored• Stick• TIG• Innershield• Submerged Arc• Gouging

Recommended Wire Feeders• LF-33• LN-25 PRO, LN-23P• NA-3, NA-5, NA-5R

Key Options • K10376 Adapter M14/Dinse(F) • KIT-400A-70-5M Cable Kit 400A – 70 mm² – 5 m • GRD-400A-70-xM Ground cable 400A – 70 mm² – 10/15 m • FL060180600-L FLAIR 600 Gouging Torch • K10124-1-15M Remote control – 15 m • K804-1 Multi process switch • K1520-2 Transformer kit 115V/42V • K2187-2 Water cooler COOL ARC® 40 • K10420-1 Coolant Acorox (2x5l) • K841 Cart • K14152-1 Lincoln Analog-Digital Interface


MULTI-PROCESS WELDERS Inverter Power Source






V350PRO K1728-12 200/220/380/400/415/440V/3Ph 5-425

350A/34V/60%-3Ph300A/32V/100%-3Ph320A/33V/60%-1Ph275A/31V/100%-1Ph

63A 37.5 373 x 317 x 706 IP23 / S

Features• Excellent welding behaviour on CV MIG and Stick

Welding.• Continuous control choke.• Tough durable case with roll bars and skid• Bright, large digital meters.• Control panel is simple in design and easy to operate.• Its plug-and-play intelligence allows it to automatically

adjust to your wire feeder instantly.

The multi-process Invertec® V350 PRO is an efficient, lightweight and portable choice for training, fabrication or construction applications. Smart operation allows it to handle any stick, TIG and MIG applications. This CE model has full Amphenol connections and a remote control. Its plug-and-play intelligence allows it to automatically adjust to your wire feeder instantly.

Design smart, Built toughInvertec® V350-PRO

• Digital display for Wire feed speed and Voltage.• Adjustable Pre and Post flow.• Perfect feeding.

Processes• MIG, Flux-cored• Innershield• Stick• Gouging• TIG

Recommended Packages Include• LF-33 or LN-25 Pro wire feeder• Invertec® V350-PRO Power Source• 3 m-input cable• 5 m-Interconnection cable, MIG gun

and gas regulator

Recommended wire feeders• LF-33 or LN-25 pro

Key Options • K10347-PG-xM Interconnection cables • K10429-36-xM MIG gun LGS 360 G – 300A – 3/4/5 m • GRD-400A-70-xM Ground cable 400A – 70 mm² – 10/15 m • K10262-3 Cart • K10158-1 Readi-reel mounting stand (15 kg) • K14152-1 Lincoln Analog-Digital Interface

Conventional Power Source

LINCOLN ELECTRIC 3



N

OUTPUTINPUT

OUTPUTINPUT

Features• Standard Volt and Ammeter.• Solid state circuitry for long life and repetitive welding applications.• Arc control adjustment changes pinch effect of the arc to control spatter, fluidity

and bead shape in the MIG/ Flux-Cored mode.• Mode switch for selecting desired output characteristics.• Outstanding welding performance with a single range full output control potentiometer.• Low profile case allows stacking machines up to three high to conserve floor space.

This heavy duty, industrial, three-phase, multi-process power source scores big in MIG, flux-cored, submerged arc, stick and DC TIG welding. It’s a great choice for arc gouging, too. Flexibility doesn’t mean that it’s complicated – the DC-400 is easy to set-up and use. Changeover between processes is as simple as turning the multi-process switch. On-board ammeter and voltmeter make monitoring of key welding parameters easy. Inductance and arc force controls allow the operator to efficiently refine the arc for the job in hand.

Idealarc® DC-400Simple DC multi-process welding

shown with multi-process switch option

LINCOLN ELECTRIC 3



N


Product Item Number

Primary Voltage(50-60Hz)


(slow)Weight (kg)



Idealarc® DC-400 K1309-17 230/400V/3Ph 60-500

500A/40V/50%450A/38V/60%400A/36V/100%

77/45 215 782 x 566 x 840 IP23 / F

rev.: E-GMAW12-EN-27-12-17


Inverter Power SourceMULTI-PROCESS WELDERS

INPUT OUTPUT

INPUT OUTPUT

Processes• MIG• Flux-cored• Stick• DC TIG• Arc Gouging

Recommended Wire Feeders • LN-25 PRO Dual Power• LN-25 X• Power Feed 84 (Flextec standard)

Key Options • K3059-4 Inverter and Wire Feeder Cart • K3091-1 Multi-Process Switch • K2909-1 12-pin to 6-pin Adapter • K857 Remote Output Control – 7.6 m • K4068-1 Inverter Cart Mounting Bracket Kit

Processes• MIG• Flux-cored• Stick• DC TIG• Arc Gouging• SAW Welding

Recommended Wire Feeders• LN-25 PRO, LN-25 PRO Dual Power• LN-25 X - Flex Feed 84 Dual and Bench• LT-7• NA-3, NA-5

Key Options • K10376 Adapter M14/Dinse(F) • K10238-10-5M Input cable – 4 x 10 mm – 5 m • K10347-PG-xM Interconnection cables (for LF Feeders only) • K10095-1-15M Remote control – 15 m • K126-1/2 Innershield guns 350A – 62° – 1.6 mm – 3/4.6 m • KP1697-x Drive roll kit range • K3059-4 Cart


LINCOLN ELECTRIC 3



N

LINCOLN ELECTRIC 3



N

Features• Desert Duty Rated™ for extreme temperatures up

to 55°C.• VRD® Voltage Reduction Device reduces Open

Circuit Voltage for added safety.• Offered in 4 and 6 pack rack configurations.

• Wide 5-425 amperage range.• Capable of arc gouging with 4.8 mm carbons.• “X” = CrossLinc™: you get voltage control at the

feeder without an additional control cable.

Features• Flexible multi-process capability – including stick,

Touch Start TIG® (DC), MIG, flux-cored welding and carbon arc gouging with up to a 9.5 mm and 12.7 mm carbon.

• CV submerged arc welding with all advantages and saves of the inverter technology is possible with Flextec 650X.

• The Future is NowSM – you no longer have to pay a premium price to gain the advantages of inverter technology over conventional welders. Faster arc response, low power consumption and enhanced portability.

• Bright digital amp and volt meters – easy to monitor, even in sunlight and presettable for precise procedure control.

• Compact, durable case – Tough IP23 enclosure rating ensures the Flextec™ 650X will withstand extreme field environments.

• Selectable Hot Start – turn it off for thin material or flip it on to get the extra starting amperage you need for thick, rusty or dirty material.

• Variable arc control – in stick mode, vary the arc force to obtain the “soft” or “crisp” arc you want as conditions require. In CV modes, vary the pinch or inductance to control spatter, fluidity and bead appearance.

• Desert Duty® rated – welding outputs are rated for extreme temperature operation up to 55°C.

Out on the construction jobsite or in most fabrication shops, it pays to keep it simple.The Flextec® 350X multi-process welders are designed for that kind of environment. They are easy to setup and easy to operate, yet rugged and flexible enough to be used in construction, fabrication, shipbuilding and other heavy-duty applications.

This multi-process welder delivers respectively up to 815A of welding power for a variety of applications, including construction and fabrication. It features an IP23 rating for outdoor operation and storage and the latest inverter technology will save you real money on the utility costs associated with your welding operations.

Flextec® 350X CE

Flextec® 650X

Rugged Multi-Process Power Sources for Maximum Flexibility

Flexible technologySM


Product Item Number



(slow)Weight (kg)

DimensionsHxWxD (mm)


Flextec® 650X K3515-1 380/460/575/3Ph 10-815A 750A/44V/60%650A/44V/100%

61/50/40/ 57/47/38 74.8 554 x 410 x 745 IP23S / H


Product Item Number



(slow)Weight (kg)


Protection Class

Flextec® 350X standard K4284-1380/460/575/3Ph 5-425A 300A/32V/100%

350A/34V/60% 26/23/1843.9

477 x 356 x 673 IP23Flextec® 350X construction K4283-1 41.7

rev.: E-GMAW13-EN-25-09-17

MULTI-PROCESS WELDERS Advanced Device

Features• Advanced digital controls sample the welding

parameters at extremely high speeds.• Compatible with any DC welding process power source

and wire feeder.• Connect to any DC welding circuit, attach voltage

sense leads and begin monitoring weld performance immediately.

• The Arc Tracker™ auto-senses any input voltage between 120 – 230 Volts AC.

The ARC TRACKER™ is a high-performance, portable product designed to accurately measure the True Energy delivered into a weld from any welding machine (DC process only). The ARC TRACKER™ will accurately measure the welding parameters (arc voltage, arc current and weld time) and provide a real-time calculation of the True Energy into the weld. While welding, the True Energy [in joules (J)] for the weld will be accurately displayed on the user interface.

LACI is a module which allows to connect Speedtec®405/505 S/SP to any LAN network. Supported by Lincoln Electric software solutions: Power Wave Manager and Checkpoint – cloud based data management system, LACI enables machine to store important data (current, voltage, WFS, consumable usage, OEE, etc..) and monitor every detailed aspect of your welding process. This applies to single machine or all equipment that will be connected to the network. Collected information can be presented graphically online on any browser or exported to excel file to be stored locally.

Portable, Powerful. Weld Performance Monitoring

Lincoln ArcLink Communication Interface

Arc Tracker™

LACI

Processes• DC Arc Welding

Circuits Only (10-1000 A at 100% Duty Cycle)

• Any DC Polarity Welding Process• Any Welding Equipment

Process Limitations• Cannot be used with AC arc welding

circuits.• 1000A, 120V max.

Key Options • K10376 Adapter M14/Dinse(F) • K10377 Adapter M14/Dinse(M) • KP10559-1 Main cable C13 fem/EEC male, 2.5 m

Unit includesLACI Module12 languages Printed User ManualColored Carton Box

Recommended Power Sources• Speedtec® 405S/505S• Speedtec® 405SP/505SP

Key Options • K14124-1 Pendant box (5m cable, plug 12PIN) • K14132-1 Adapter 5Pin(M)/12Pin(F) • K14131-1 Arclink-T Flex • K14125-1 Kit 12-pin socket (F)

LINCOLN ELECTRIC 3



N


Product Item Number Primary Voltage(50-60Hz) Rated Output Current Draw Weight (kg) Dimensions

HxWxD (mm)

Arc Tracker™ K3019-1 120-230/1Ph 1000A/44VDC/100% 0.8A @ 120VAC 9 305 x 220 x 380


Product Item Number Data transfer Conformance Weight (kg) Dimensions HxWxD (mm)

LACI K14130-1 Ethernet EN60974-10:2007; RoHs 0.4 170 x 140 x 75

• Communicates weld data status to your network via standard Ethernet.

• Easily calibrated for use in factory quality systems.

• Arc Tracker™ software tools are available at powerwavesoftware.com, including: - Power Wave® Manager - Production Monitoring™ - CheckPoint™.

INPUT OUTPUT

Advanced Device


Features• Welding management: monitor each weld parameters

on every machine.• Online data collection: store your data in the cloud and

access it through any browser.

• Diagnostics: machine status, alerts and errors, detailed hardware and software information.

• Software update and machine parameters setup accessible remotely or locally.


rev.: E-GMAW14-EN-18-10-17


MULTI-PROCESS WELDERS

For Speedtec 180C/200C• KIT-200A-25-3M ( 200A – 25 mm² – 3 m)

For DC400• KIT-400A-70-5M (400A – 70 mm² – 5 m)

Cable kits (ground / electrode)with ground cable & electrode holder (clamp)Item n°:

Cable kits (ground)For V350-PRO & DC400Item n°:

• GRD-400A-70-10M (400A – 70 mm² – 10 m)

• GRD-400A-70-15M (400A – 70 mm² – 15 m)

For Speedtec 180C & 200C• K14010-1

WATER COOLERSCOOL ARC® 46For Speedtec 405S & 505SItem n°: K14105-1

Coolant ACOROX( 2x5 l ) Item n°: K10420-1

MIG GUNS

Interconnection cablesFast-mate (x2), gas hose, protection,(2.5, 5, 10, 15, 20, 25 & 30 m)Item n°:

For V350-PRO• K10347-PG-xM (air cooled)• K10347-PGW-xM (water cooled)

For Speedtec 405S & 505S• K10349-PG-xM (air cooled)• K10349-PGW-xM (water cooled)

REMOTE CONTROLS1 potentiometer, 6-pins, 15 m

Item n°: K10095-1-15M

Extension cableItem n°: K10398

Accessories

ACCESSORY KITS


K10429-15-xM 3 m, 4 m or 5 m• LGS 250G, 200A @ 60%

K10429-25-xM 3 m, 4 m or 5 m• LGS 360G, 300A @ 60%

K10429-36-xM 3 m, 4 m or 5 m


K10429-505-xM 3 m, 4 m or 5 m

LINC GUN™ rangeAs standard these guns come with an ergonomic grip, springs on both sides of the cable, retractable pins and a “rotating ball joint” at the end of the gun grip.

DRIVE ROLL KITS

2 rollsFor Speedtec 180C/200C• KP14016-0.8 0.6-0.8 mm – solid wire

• KP14016-1.0 0.8-1.0 mm – solid wire

• KP14016-1.2 1.0-1.2 mm – solid wire

• KP14016-1.1R 0.9-1.1 mm – cored wire

• KP14016-1.6R 1.2-1.6 mm – cored wire

• KP14016-1.2A 1.0-1.2 mm – aluminium wire

UNDERCARRIAGERear-wheeled cart with front casters and single gas bottle platform. Convenient handles allow for easy cable storage. Small footprint fits through 762 mm door. For use with Flextec 350X/650X.Item n°:K3059-4

rev.: E-GMAW15-EN-27-12-17


ADVANCED-PROCESS WELDERSA Wide Variety of Welding Waveforms for Every ApplicationFast, Reliable Digital CommunicationMulti-Process Welding on a Variety of Materials



Adva

nced

Mod

ule

Inve

rter

Pow

er S

ourc

eIn

vert

er P

ower

Sou

rce

Advanced Process Welders

Power Wave® STT® ModuleAdd STT® Process Capability

Power Wave® Advanced ModuleAdd STT, AC and TIG HF Process Capability

Speedtec® 405SP, 505SP – PulseHigh output, reliable industrial machine

Invertec® STT® IIFeaturing Surface Tension Transfer® process

Power Wave® C300Portable Flexibility

Power Wave® S350 CE, S500 CEPulsed perfection, Modular flexibility

Mod

e

Pola

rity

Out

put

Rang

e (A

mps

)

Volt

age

(V)

Stic

k

TIG

MIG

MIG

STT

MIG

Pul

se

Flux

-cor

ed

Goug

ing

Wav

efor

m C

ontr

ol

tech

nolo

gy®

ArcL

ink®

Dig

ital

co

mm

unic

atio

ns

War

rant

y (y

ears

)


Mod

e

Pola

rity

Out

put

Rang

e (A

mps

)

Volt

age

(V)

Stic

k

AC/D

C, P

ulse

, HF

MIG

MIG

STT

MIG

AC

Puls

e

Flux

-cor

ed

Goug

ing

Wav

efor

m C

ontr

ol

tech

nolo

gy®

ArcL

ink®

Dig

ital

co

mm

unic

atio

ns

War

rant

y (y

ears

)

OUTPUT INPUT PROCESS FEATURESAdvanced Module


Speedtec® 405SPCC/CV DC

20-400400

● ● ● ● ● ● ■ ■ 3

Speedtec® 505SP 20-500 ● ● ● ● ● ● ■ ■ 3

Invertec® STT® II STT DC 5-4505-125

200/220/380/400/440 ● ■ 3

Power Wave® C300

CC/CV DC

5-300 230/400 ● ● ● ● ● ■ ■ 3

Power Wave® S350 5-350230/380/415/

460/575

● ● ● ▲ ● ● ● ■ ■ 3

Power Wave® S500 5-500 ● ● ● ▲ ● ● ● ■ ■ 3

Power Wave® STT® Module STT DC 5-55040V DC

● ■ ■ 3

Power Wave® Advanced Module CC/CV AC/DC 5-350 ● ● ● ● ■ ■ 3

rev.: E-GMAW16-EN-25-09-17


ADVANCED PROCESS WELDERS

Speedtec® 405SP – PulseSpeedtec® 505SP – Pulse

INPUT OUTPUT

Features• Pulsed MIG process-great for low spatter, low heat input and

out-of-position applications-makes virtually any operator a better welder!• Premium welding behaviour on CV MIG & Stick welding.• Variable inductance control.• Synergic capability.• Job control with limits secured by a password (PF-46).• Continuous control of wire feed speed and voltage.• Remote control on the gun (PF-46 & optional for PF-44).• Pre-setting (PF-41 excl.) & Multi procedure (PF-46).

High output, reliable industrial machineThe Speedtec® range is the solution for Industrial Multi-process applications. With modular and compact design this welding set is easy to move around site. Transport is trouble free thanks to the lower weight of this new design. With the latest high frequency inverter technology, the arc is precisely controlled, many times faster than conventional analogue power sources. The electrical characteristics of the welding power can be changed by software in real time updates. A wide range of synergic programs are available as standard allowing simple yet precise control of welding parameters for the best results every time. The Speedtec® machines utilise the very latest power source technology for efficiency and lower energy consumption. Their advanced Inverter technology will save both time as well as energy. Driven by Lincoln Electric’s Green Initiative, we aim to reduce the costs to you as well as the environment. Thesewelding sets are available as 400A rated at 80% or 500A rated at 50% duty cycle (at 40°C). With the PF-46 wire feed unit the welding set can support the MIG processes with synergic programs for Steel, Stainless Steel, Aluminium and Flux cored wires. Lift TIG and Stick functions are available as standard.


Processes• Pulsed MIG• MIG• Flux-Cored• Stick• Lift TIG• Gouging





Basic Unit Includes• Primary cable 5 m• Ground cable with clamp 3 m

Recommended Wire FeedersPF-41, PF-42, PF-44, PF-46

Recommmended packages include• PF-4X wire feeder • Speedtec® power source• COOL ARC® 46

for water cooled version• Cart• 5 m-Interconnection cable, MIG gun

and gas regulator

Key Options • K10349-PG(W)-xM Interconnection cables • K10429-36-xM MIG gun LGS 360 G – 300A – 3/4/5 m • K10429-505-xM MIG gun LGS 505 W – 450A – 3/4/5 m • K14096-1 Cart Speedtec • K14141-1 Cart Dual • K14105-1 Water cooler COOL ARC® 46 • K10420-1 Coolant Acorox (2x5l) • K14130-1 LACI (Lincoln Arlink Communication Interface) • K14121-1 User Interface U2 • K14122-1 User Interface U4 • K14123-1 User Interface U6 • K14124-1 Pendant box (12-pins) • K14125-1 Kit 12-pin socket (F) • K14131-1 Arclink-T Flex • K14132-1 Adapter 5-pin(M)/12-pin(F) • K14135-1 Arclink-T-Power • K14120-1 Kit 6-pin socket (F)



Current Range (A) Rated Output

Fuse Type rG or Circuit Breaker Type Z

Weight (kg)


Protection Class

Speedtec® 405SP (Pulse) K14117-2400V/3Ph

20-400A 400A/34V/80% 32A50 535 x 300 x 635 IP23

Speedtec® 505SP (Pulse) K14116-2 20-500A 500A/39V/50% 32A



PowerOutput Power

WFS Range (m/min)



PF-41 K14163-1

4 A/W 40V DC 500A@60% 1.0-22 0.8-1.6 1.0-1.6

17

460 x 300 x 640PF-42 K14107-1 18

PF-44 K14108-118.5

PF-46 K14109-1

LINCOLN ELECTRIC 3



N


rev.: E-GMAW17-EN-27-12-17


ADVANCED PROCESS WELDERS

OUTPUTINPUT Technical Specifications



(slow)Weight (kg)



Power Wave® C300 K2865-1 230/400V/3Ph(208-575V) 5-300 300A/29V/40% 40/25 50.4 478 x 356 x 610 IP23 / H


OUTPUTINPUT

Features• Superb arc welding characteristics in Pulse,

Pulse on-Pulse®, CV, Stick and TIG DC.• A variety of materials are supported as standard; Steel,

Stainless, Aluminium but also High Nickel and CuSi.• RapidArc® for a higher travel speed and less Heat Input

with steel and Stainless.• PowerMode® reduces spatter and improves appearance

even of low voltage applications on steel & stainless steel, also beneficial for high deposition on aluminium.

• S2F for premium Aluminium welding.• Clearing Pulse providing a clean wire tip without a ball,

ready to restart.• Job control to store your settings and quick recall.

The Power Wave® C300 is a part of a modular concept offering many different configurations and allowing to adjust the machine to your welding application.All Power Waves® come complete with an Ethernet connection and free software. Free software updates available on www.powersoftware.com

Portable FlexibilityPower Wave® C300


Product Item Number

Primary Voltage (50-60Hz) Current Range (A) Rated Output Fuse Size




STT II K1527-3200/220/380/400/440V/3Ph 5-450 (peak)

5-125 (background)225A/29V/60%200A/28V/100% 32

59 589 x 336 x 620

IP23 / HSTT II Package PSTT2-1-A 75 995 x 920 x 980

STT II K1527-4 400V/3Ph 59 589 x 336 x 620

Processes• Pulse MIG• Pulse-On-Pulse®• MIG• Flux-Cored• Stick• Lift TIG DC

Key Options • GRD-400A-70-xM Ground cable 400A – 70 mm² – 10/15 m • K10429-36-xM MIG gun LGS 360 G – 300A – 3/4/5 m • K10429-505-xM MIG gun LGS 505 W – 450A – 3/4/5 m • KP1696-x Drive roll kit range • KP1697-x Drive roll kit range • K14050-1 Water cooler COOL ARC® 50 • K10420-1 Coolant Acorox (2x5l) • K14087-1 Cart

Features• Controlled penetration and outstanding heat input control – ideal

for welding joints with open root, gaps, or on thin material with no burnthrough.

• Reduced spatter and fumes – current is controlled to achieve optimal metal transfer.

• Various shielding gases – blends of Argon including Helium or 100% CO₂ with larger diameter wires.

• Good bead control and faster travel speeds – can replace TIG in many applications.

• Background and Tailout Current – accurately control fine and coarse heat input for reduced distortion and burnthrough as well as proper penetration.

• Adjustable Hot Start controls the heat at the start of the weld.• Fully featured; the LF 33 features 2/4 stoke, burnback, gas purge,

cold inch, run in.

The revolutionary STT® II power source combines high frequency inverter technology with advanced Waveform Control® to provide a better welding solution than traditional short arc MIG.

Featuring Surface Tension Transfer® process


LINCOLN ELECTRIC 3



N

Limits and access through a password are as standard supported.

• Remote on the gun by use of a cross switch allows you to switch to another job of decrease or increase WFS during welding.

• Water Cooled when combined with COOL ARC® 50 water cooler.

Invertec® STT® II


Processes• MIG STT®

Recommended Packages Include• LF-33 wire feeder 4-roll air-cooled,

1.0-1.2mm drive roll• STT® II power source on

undercarriage, input cable, work clamp and cable assembly


Key Options • K10370-PG-xM Interconnection cables • K10429-15-xM MIG gun LGS 150 G – 150A – 3/4/5 m • K10429-25-xM MIG gun LGS 250 G – 200A – 3/4/5 m • K10429-36-xM MIG gun LGS 360 G – 300A – 3/4/5 m • K14094-1 Remote control – 15 m • K10158-1 Readi-reel mounting stand (15 kg)

LINCOLN ELECTRIC 3



N

rev.: E-GMAW18-EN-27-12-17




PowerOutput Power

WFS Range (m/min)



PF-41 K14163-1

4 A/W 40V DC 500A@60% 1.0-22 0.8-1.6 1.0-1.6

17

460 x 300 x 640PF-42 K14107-1 18

PF-44 K14108-118.5

PF-46 K14109-1

ADVANCED PROCESS WELDERS Inverter Power Source

Pulsed perfection, Modular flexibility


Product Item Number






Power Wave® S350 CE K2823-2230/380/415/460/575V

5-350 350A/31.5V/40% 45/30 A 46.6 518 x 356 x 630IP23 / H

Power Wave® S500 CE K3168-1 5-500 500A/39V/60% 90/60A 68 570 x 356 x 630


Features• Superb arc welding characteristics in Pulse, Pulse on-Pulse®, CV, Stick and TIG DC.• A variety of materials are supported; Steel, Stainless, Aluminium but also High Nickel and CuSi.• RapidArc®, & Rapid X™ for a higher travel speed and less Heat Input with Steel and Stainless.• PowerMode® reduces spatter and improves appearance even of low voltage applications on steel

& stainless steel, also beneficial for high deposition on aluminium.• S2F for premium Aluminium welding.• Clearing Pulse providing a clean wire tip without a ball, ready to restart.• STT module is available transforming the machine into a STT/Pulse welding machine.• Water Cooled when combined with the COOL ARC® 50 water cooler.

Power Wave® S350 CEPower Wave® S500 CEThe Power Wave S350 and S500 are part of a new modular concept from Lincoln Electric; designed to offer a multitude of different set-up configurations, these machines can be tailored easily yet precisely to your welding application. The new platforms all communicate via Arclink allowing seamless connection with all of Lincoln’s digital Feeders from the PF-4X to PF-84. All Power Waves® come complete with an Ethernet connection. You can get access to the machine by using this connection and our free software. Updates are free of charge; our website powerwavesoftware.com contains the latest version of software including weld modes.

LINCOLN ELECTRIC 3



N

Processes• Pulse MIG• Pulse-on-Pulse MIG• MIG• Flux-Cored• Stick• Lift TIG• Gouging

Recommended Wire feeders• PF-41, PF-42, PF-44, PF-46, PF-84,

PF-84 DualRecommended Packages Include• PF-4X wire feeder• Power Wave® power source, Input

cable, Work clamp and cable assembly + CoolArc® 5X for water cooled version


Key Options • GRD-400A-70-xM Ground cable 400A –70 mm² – 10/15 m • K10349-PG(W)-xM Interconnection cables • K10429-36-xM MIG gun LGS 360 G – 300A – 3/4/5 m • K10429-505-xM MIG gun LGS 505 W – 450A – 3/4/5 m • K2921-1 STT Module • K14050-1 Water cooler COOL ARC® 50 • K10420-1 Coolant Acorox (2x5l) • K14085-1 Cart • K2444-3 CE Filter (PW S700) • K3004-1 Autodrive 19 • K3171-1 Autodrive 19 Tandem • K2827-2 DeviceNet Kit (S350,S500) • K3001-1 Optional kit (UI, solenoid kit, 12-pin board) • K14165-1 User Interface U1 • K14121-1 User Interface U2 • K14122-1 User Interface U4 • K14123-1 User Interface U6 • K14124-1 Pendant box (12-pins) • K14125-1 Kit 12-pin socket (F) • K14131-1 Arclink-T Flex • K14132-1 Adapter 5-pin(M)/12-pin(F)

INPUT OUTPUT


rev.: E-GMAW19-EN-27-12-17


ADVANCED PROCESS WELDERS Advanced Module

Processes for Power Wave® STT® Module• MIG-STTPower Wave® Advanced Module• MIG-STT, AC MIG Pulse• AC TIG, AC TIG HF• DC TIG, DC TIG HF, DC TIG-P, DC TIG-P HF

Recommended Packages Include• PF-4X, 8X (Advanced Module)• Power Wave® power source, Input

cable, Work clamp and cable assembly + COOLARC® 50 for water cooled version

• 5 m-Interconnection cable, MIG gun, Tig torch (Advanced Module) and gas regulator

Key Options Advanced Module • K3980-1 CE KIT-1 • K14144-1 CE KIT-2 TIG

OUTPUTINPUT

Features• Exceptional Arc Control.• UltimArc® – in synergic modes, it dynamically

and simultaneously controls all heat input / arc parameters together. The result is easy procedure setting for the operator.

• Modular Design – allows easy connection and fast digital ArcLink® communication with compatible S-Series Power Wave® power sources, Power Feed® wire feeders and water coolers. Add STT® / AC and TIG capability without having to purchase a second power source.

• Compact Footprint – securely connects directly below Lincoln S-Series Power Wave® models, without taking valuable floor space.

• Self-Protecting Circuits – the module will protect itself from the excessive transient voltages associated with highly inductive weld circuits.

Add STT® / AC and TIG HF Process Capability

LINCOLN ELECTRIC 3



N

Power Wave® STT® ModulePower Wave® Advanced ModulePower Wave® STT® Module adds STT® (Surface Tension Transfer®) process capability to any compatible Power Wave® S-Series and R-Series power source to gain outstanding puddle control for critical sheet metal or pipe root pass welding standard. Power Wave® Advanced Module adds AC TIG and MIG process capability to any compatible Power Wave® S-Series power source to gain outstanding performance for Aluminium welding. Advanced Module allows STT® process as well.

Accessories


ACCESSORY KITSCable kits (ground)For Power WaveItem n°:• GRD-400A-70-10M(400A – 70 mm² – 10 m)

• GRD-400A-70-15M(400A – 70 mm² – 15 m)

Interconnection cablesFast-mate (x2), gas hose, protection, (2.5, 5, 10, 15, 20, 25 & 30 m) (with cross switch)Item n°:For Speedtec 405SP/505SP & Power Wave• K10349-PG-xM (air cooled)

• K10349-PGW-xM (water cooled)

For STT II• K10370-PG-xM (air cooled)

WATER COOLERSCOOL ARC® 50For PW C300 / S350 / S500Item n°: K14050-1

COOL ARC® 46For Speedtec 405SP & 505SPFor V350-PRO & DC400Item n°: K14105-1

COOLANT ACOROX( 2x5l) Item n°: K10420-1

AUTODRIVE SYSTEMS• AutoDrive® 19 Controller Relays wire feed commands from a Power Wave® S-Series power source to any AutoDrive® Series robotic wire drive for automated welding operation.

• AutoDrive® 19 Tandem Controller Relays wire feed commands from Power Wave® S-Series power source to any AutoDrive® Series robotic wire drive for automated tandem welding operations.

DRIVE ROLL KITS2 rolls• KP1696-030S 0.6-0.8 mm• KP1696-035S 0.9 mm• KP1696-045S 1.2 mm• KP1696-052S 1.4 mm• KP1696-1/16S 1.6 mm• KP1697-035C 0.9 mm• KP1697-045C 1.0-1.2 mm• KP1697-052C 1.4 mm• KP1697-1/16C 1.6 mm• KP1697-068 1.8 mm• KP1697-5/64 2.0 mm• KP1697-3/32 2.4 mm

DEVICENET™ KITThe kit allows DeviceNet™ connectivity to control the power source. Includes internal harness and 5-pin DeviceNet™ receptacle for mounting on power source back panel.

UNDERCARRIAGES• Undercarriage with gas cylinder platform, delivered as a kit, for use Speedtec 405/505S & SPItem n°: K14096-1

• Undercarriage with gas cylinder platform, delivered as a kit, for use with PW C300Item n°: K14087-1

• Undercarriage with gas cylinder platform, delivered as a kit, for use with PW S350/500Item n°: K14085-1

• Rear-wheeled cart with front casters and single gas bottle platform. Convenient handles allow for easy cable storage. Small footprint fits through 762 mm door. For use with Power Wave and Flextec.Item n°: K3059-4

Technical SpecificationsProduct Item Number Input Voltage Rated Output Weight (kg) Dimensions HxWxD (mm) Protection ClassPower Wave® STT® Module K2921-1

40V DC500A/60% 21.3

292 x 353 x 630 IP23Power Wave Advanced Module K2912-1 350A/40% 32


K10429-15-xM 3 m, 4 m or 5 m• LGS 250G, 200A @ 60%

K10429-25-xM 3 m, 4 m or 5 m• LGS 360G, 300A @ 60%

K10429-36-xM 3 m, 4 m or 5 m


K10429-505-xM 3 m, 4 m or 5 m


rev.: E-GMAW20-EN-27-12-17



41

POWER WAVE® SOFTWARE SOLUTIONS Power Wave® Manager – CheckPoint™ – WeldScore™ – PowerWaveSoftware.com


• Monitor operations remotely – View real time information from any networked welding station in any plant.

• Name memory settings using text fields – Customize memory names with Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), or other pertinent information.

• Store settings to be used at a later time – Backup and Restore tools can save and restore all welding settings from previous jobs.

• Install and configure CheckPoint™ right from the application.• Analyze welding operations offline – Snapshot and WeldView™ functionalities allow quick and easy diagnostics of welding equipment.

• Evaluate your power source – Check the calibration, welding cable condition and other operational settings from your computer.

Why use Power Wave® software solutions?

POWER WAVE®

Access to monitoring the welding processes. Anytime. Anywhere.

Power Wave® ManagerControl Your Process• All the information and settings necessary for welding and procedure control.

CheckPoint™Weld Data Anywhere• Store your data in the cloud and access it on almost any device.

WeldScore™Enhance Your Product Quality• An integrated weld quality system that can assist quality assurance initiatives.

www.PowerWaveSoftware.comUpgrade your Power Wave® Power Source Software for FREE• Get access to the best welding solutions in the industry.

Power Wave® Software SolutionsSoftware Solutions

Power Wave® Software allows you to:• Manage – Monitor welding

projects across the world.• Analyze – review welding

information in real time.• Control Cost – track welds and

wire consumption.• Process Control – create unique

names and set welding limits for each application.

• Adjust – change welding variable limits.

Power Wave® Software:• Increases productivity

and product quality• Reduces operational costs• Costs you nothing!• Is available in multiple

languages

rev.: E-PWS01-EN-17-10-16


POWER WAVE®

Power Wave® ManagerSoftware Solutions

System Status

Check the status of every component in your welding system.

View and easily adjust the information associated with your welding operation.

Customize the name of your memory settings to match Welding Procedure Specification (WPS) or Procedure Qualification Record (PQR) number, or any other identifier, for easy retrieval at a later date.

Backup – save all the settings associated with a specific configuration to your hard drive.

Restore – open any previously saved configuration and those settings are uploaded to your welder.

Setup/Security Settings

User Interface

Backup/Restore

rev.: E-PWS02-EN-17-10-16


CheckPoint™

Always On™ and Pulse™ are trademarks of I/Gear Online, LLC

Software SolutionsPOWER WAVE®

Store your weld data in the cloud and access it on almost any device.

Benefits• No Software Hassles:

No software to buy, install or upgrade with the standard edition. Upgrades are automatic and instantaneous.

• Easy to Activate: Minimal or no IT investment required; just connect the welder to the internet and you are ready to go.

• Easy to Use: Log in anywhere at any time to view welder status and much more.

• Mobile Device Compatibility: View on Smart phones, tablets, laptops or desktops with any browser.

• Graphical Interface: View data in an intuitive dashboard view that provides a Pulse™ on your welding operations at a glance.

• Security You Can Count On: Your data is protected with physical security, encryption, user authentication and more.

• Data Aggregation: With a global view of all of your welding equipment, you can benchmark your facilities.

• Exporting: Export data and reports in various formats for offline analysis.

• Traceability Scanning: Use the CheckPoint™ mobile app to scan barcodes for operator, consumable ID and part serial numbers. All scans are correlated with the weld data transmitted by the welder. Includes Bluetooth integration for industrial barcode scanners.

• Simple System Management Determine who is authorized to view the data, analysis, documents and manuals specific to each welder through desktop and mobile devices.

• Cloud API: Using the industry standard protocol OData, CheckPoint™ delivers secure access to data by enterprise ERP systems, plant OEE systems, and maintenance applications.

Receive email notifications based on equipment conditions and wire consumption.

View live status of each welder and weld details.

Satisfy reporting requirements by capturing audit trail data.

Alerts ProductionMonitoring

Traceability

rev.: E-PWS03-EN-17-10-16


POWER WAVE®

CheckPoint™Software Solutions

Production Dashboard

View data for each station or entire facility in a user friendly dashboard view. The Dashboard includes charts and graphs by day, week and other periods for a selection of user-determined criteria.

View a production summary of your entire welding operation. Roll up data from all welders or drill down to identify operational bottlenecks.

Data Aggregation

View key welder metrics such as WeldScore™, True Energy™, Wire Feed Speed, Current/Voltage and Wire Deposition organized by weld profile. Compare usage rates and time remaining for welding wire at each station.

Use the mobile app to scan a Lincoln Q1 or Q2 consumable lot number and the lot number is correlated to the weld data. This direct link between the weld and the consumable certificate provides an automatic, retrievable record for corporate quality systems.

Weld Profiles

Lincoln Electric Q-Cert™ Linkage

rev.: E-PWS04-EN-17-10-16


Software SolutionsPOWER WAVE®

WeldScore™Allows you to score each weld based on a trained sample of acceptable welds.

• WeldScore™ is a unique patent pending data monitoring system based on 30 to 50 internal control variables.

• Fundamentally different from data monitoring systems that only use voltage and amperage feedback.

• Higher detection reliability achieved with data collection speed of 120 kHz and embedded knowledge of the welding control system.

• Allows you to score each weld based on your trained definition of the acceptable conditions.

• Multi-parameter statistical analysis specifically designed for consistent and reliable results.

Benefits

Great for:• Expanding Quality Control Capabilities• Trade School Monitoring, Grading and

Final Examinations

• Critical Welds with Specific Quality Control Requirements

• Operator Testing and Certification Programs

Acceptable Weld – Proper gas flow and coverage produces a good weld with no porosity.

Closely matches “trained” sample weld, resulting in a 99% score.

WeldScore™ Example

Example-Low Gas Flow

Example-Low Gas Flow

Example-Shielding Gas Mix Change

Example-Shielding Gas Mix Change

WeldScore™ 99%

WeldScore™ 4%

WeldScore™ 12%

WeldScore™ 15%

WeldScore™ 0%

25 CFH, 90/10 Argon/CO₂

Unacceptable Weld – Low gas flow results in obvious porosity.

Good Appearance / Internal Porosity – The weld appears good. However, a cross section of the weld reveals pin holes and hidden porosity under the surface due to low gas flow or gas coverage.

Unacceptable Weld – Incorrect gas mix yields higher spatter levels.

Good Appearance / Inadequate Penetration – The weld appearance is good with minimal spatter. However, a cross section of the weld reveals poor penetration due to an incorrect gas type.

5 CFH

10 CFH

75/25 Argon/CO₂

100% Argon

rev.: E-PWS05-EN-17-10-16


POWER WAVE

SEMIAUTOMATIC WIRE FEEDERS Built Tough for Rough EnvironmentsReliable Feeding and DurabilityEasy to Understand User Interface



Fiel

d

Digi

tal

Digi

tal

Anal

ogSemiautomatic Wire Feeders

Linc Feed 33S, 33Small, robust, flexible & complete

Power Feed® 84 Single & DualSingle and dual bench/boom wire feeders

Power Feed® 25MPremium feeders, portable design

Linc Feed 22M, 24M & 24M PROSmall, robust, flexible & complete

Power Feed® 41, 42, 44, 46Designed to work with digital power sources

Portable construction digital wire feeders

Power Feed® 22, 26

Field

Digital

MIG

Flux

-cor

ed

Stic

k

Lif t

TIG

Goug

ing

Wir

e Fe

ed S

peed

Ra

nge

(m/m

in)

Solid

Core

d

Dri

ve R

oll

Cool

ing

War

rant

y (y

ears

)

FEATURES WIRE SIZE RANGE (mm) FEATURESAnalog

Linc Feed 22M ● ●

1.0-200.8-1.6

1.0-1.62 A 3

Linc Feed 24M ● ●

4 A/W

3

Linc Feed 24M PRO ● ● 3

Linc Feed 33S ● ●1.0-2.4

3

Linc Feed 33 ● ● 1.5-20 3

Power Feed® 22 ● ● ● ● ●1.0-22 0.8-2.4 0.9-2.4

4A/W

3

Power Feed® 26 ● ● ● ● ● 3

Power Feed® 41 ● ● ● ● ●

1.0-20 0.8-1.6 1.0-1.6

3

Power Feed® 42 ● ● ● ● ● 3

Power Feed® 44 ● ● ● ● ● 3

Power Feed® 46 ● ● ● ● ● 3

Power Feed® 84 ● ● ● ● ●2.0-30

0.6-1.6 (high speed)

1.0-2.0 (high speed) 3

Power Feed® 84 Dual ● ● ● ● ● 0.6-2.4 (low speed)

1.0-3.0 (low speed) 3

Power Feed® 25M ● ● ● ● ● 1.3-20.3 0.6-1.6 0.8-2.4 2 3

LN-23 P ● 0.76-6.7 - 1.7-2.02 A

3

LN-25 Pro ● ● 1.3-17.7 0.6-1.6 0.8-2.0 3

LN-25X ● ● 1.3-17.7 0.6-1.6 0.8-2.0 3

LN-25 Pro & Dual ProPortable construction wire feeder

LN 23PBuilt for the job

LN-25XFull control with no control cables

rev.: E-WF01-EN-25-09-17


Features• Continuous control of wire feed speed.• Trigger mode selection for standard 2-steps or

interlocking 4-steps.• Gas purge to strike the arc with full shielding.• Burnback preventing the wire sticking in the weld pool• Cold inch control used to feed the wire into the torch.• Stabilised wire drive system for constant control of wire

feed speed.• Delivered mounted on an undercarriage.• Bright digital Volt and Ammeter (optional for LF22M).• Run in to support perfect starting (except for LF22M)

+ for the LF24M PRO• Synergic control to support easy control by the welder• Gas preflow improves the protection of the bead before

arc ignition.

Small, robust, flexible & completeLinc Feed 22M, 24M & 24M PROThe LF-22M, LF-24M and LF-24M Pro are portable wire feeders with stabilised wire feed speed. They include a rugged 2 or 4 roll wire feed unit, featuring cold inch, gas purge and built-in burn back facility. They can be mounted on the power source with a swivelling, wheeled carriage. Power source to wire feeder interconnecting cable assemblies are available in different lengths that allow working at distance from the power source.

AnalogSEMIAUTOMATIC WIRE FEEDERS


Product Item Number Drive Roll Cooling Rated

Output Input Power WFS Range (m/min)



LF-22M K14064-1 2 A

500A/60% 34-44V AC 1-20 0.8-1.6 1.0-1.6

15

440 x 275 x 636LF-24M K14065-1W4 A/W 17

LF-24M PRO K14066-1W

INPUT OUTPUT

Processes• MIG• Flux-Cored

Recommended Power Sources• Powertec® 305S / 365S / 425S / 505S

Base Unit Includes• Drive roll kit 1.0-1.2 mm• Water connection kit (except LF22M)

Key Options • K10347-PG(W)-xM Interconnection cables • K10429-15-xM MIG gun LGS 150 G – 150A – 3/4/5 m • K10429-25-xM MIG gun LGS 250 G – 200A – 3/4/5 m • K10429-36-xM MIG gun LGS 360 G – 300A – 3/4/5 m • K10429-505-xM MIG gun LGS 505 W – 450A – 3/4/5 m • K115-1/2 Innershield gun 450A – 82° – 3 mm – 3/4.6 m • K126-1/2 Innershield gun 350A – 62° – 1.6 mm – 3/4.6 m • KP14016-x Drive roll kit range (2R) • KP14017-x Drive roll kit range (4R) • K10158-1 Readi-reel mounting stand (15 kg) • K14032-1 Heavy duty undercarriage • K14073-1 Meter kit (LF22M)

Analog

Small, robust, flexible & complete

Features• Small, rugged and easy to handle feeder with bright digital

voltage and ammeter.• All drives are equipped with an excellent wire drive system with

four large drive rolls and powerful motor.• Electronic feedback system on the wire drive will guarantee

consistent wire feed speed.

Processes• MIG• Flux-Cored

Recommended Power Sources• STT® II / CV-425 / CV-510• DC-400• Invertec® V350 PRO• Flextec® 450/650 (with limited

output)• Ranger® 305D / Vantage® 410/500

Base Unit Includes• Drive roll kit 1.0-1.2 mm,• Water connection kit (LF 33)

Key Options • K10347-PG(W)-xM Interconnection cables • K10370-PG-xM Interconnection cables • K115-1/2 Innershield gun 450A – 82° – 3 mm – 3/4.6 m • K126-1/2 Innershield gun 350A – 62° – 1.6 mm – 3/4.6 m • KP14017-x Drive roll kit range (4R) • K14034-1 Remote control (LF33) • K10158-1 Readi-reel mounting stand (15 kg) • K14032-1 Heavy duty undercarriage • MIG guns: same as LF 22M, LF 24M and LF 24M Pro

Linc Feed 33S & 33The LF33S and 33 are wire feeders designed to withstand extreme environmental conditions. With these feeders, there is a focus on ruggedness construction, physical dimensions and ease of use. The result is an incredibly rugged, protective casing as standard complete with undercarriage for use under tough industrial conditions. The feeders are able to accept not only D300 (15 kg), but also small D200 (5 kg) wire spools, using solid or cored wire including Innershield. The entry level LF33 is equipped with 2/4-step, run-in, wire inch and gas purge. Two clear digital meters display the welding voltage and amperage.

LINCOLN ELECTRIC 3



N



OutputInput Power

WFS Range (m/min)



LF-33S K14051-14 A/W 500A/60% 34-44V AC

1-200.8-1.6 1.0 – 2.4

12 350 x 195 x 530

LF-33 K14030-1W 1.5-20 17 460 x 270 x 636

INPUT OUTPUT

LINCOLN ELECTRIC 3



N

rev.: E-WF02-EN-27-12-17


Features• Standard dual procedure allows operator to set different voltage and wire feed speeds

and switch between the two.• Tough Plastic Case: Polycarbonate flame resistant case ensures a lightweight and compact

design, allowing them to be carried to remote or difficult to reach welding applications.• Top class wire drive system: A new four-roll driven wire feeding system is easily accessible

ensuring increased efficiency and providing reliability in feeding various types of wires especially with aluminium wires.

• Hardened and Construction Ready: Ideal for use for general fabrication, in shipyards, on-site or with long interconnection cables.

• User Interface: LED’s with bright digital meters for PF22 and TFT color with innovative icon language for easy operation for PF-26.

• Hot/Soft start Crater Run and all standard features (PF-26).• Internal Lighting: High intensity LEDs illuminate the wire drive.• Fully encapsulated case protects feeders’ components as well as the welding wire from

external contaminants.

Power Feed® 22 and Power Feed® 26 are new semiautomatic portable construction and digital wire feeders which support all multi-process and advanced digital (ArcLink®) Lincoln Power Sources. These are ideal for field construction and fabrication, shipbuilding and pipeline applications. A Polycarbonate flame resistant case ensures that the Power Feed® 22 & Power Feed® 26 has a lightweight and compact design, allowing them to be carried to remote or difficult to reach welding applications.Power Feed® 22 is equipped with bright digital meters (visible pre-setted and actual values), trim function, mode selector and main starting/ending functions.It has 8 programs with quick access: 4 fixed as a welding process (GMAW, FCAW-GS, SMAW, GTAW) plus 4 which can be changed and assigned to one of four user memory.Top class Power Feed® 26 utilizes TFT colour display with intuitive icon language and variety of special functions. Enables connection of push-pull gun allows you great performance on aluminium. Power Feed® 26 combines all functions with USB connection, dual procedure, memory and limits.

Portable construction digital wire feedersPower Feed® 22, 26

INPUT OUTPUT

DigitalSEMIAUTOMATIC WIRE FEEDERS


Functions & Features

Power Feed User Interface Graphic Display

Standard Controls

Meters Digital Crater Hot/Soft

StartPre-settings Synergic Memory/

Limits USB

PF-22 U2-U6 - √ - √ - √ √ - -

PF-26 U2-U6 √ √ √ √ √ √ √ √ √

Technical Specifications Standard Wire Feeders Power Feed Item Number

Drive Roll

CoolingInput Power

Output PowerWFS Range (m/min)


DimensionsHxWxD (mm)Solid Cored Aluminium

PF-22 K14110-14 A/W 40V DC 500A@60% 1.0-22 0.8-2.4 0.9-2.4 1.0-2.4

14.8380 x 220 x 590

PF-26 K14138-1 15.2

Processes• Pulsed MIG• MIG• MIG-STT• Flux-Cored• Stick• TIG• Gouging

Recommended Power Sources• Power Wave® S350, S500• Speedtec® 405S, 405SP, 505S, 505SP

Base Unit Includes• Drive rolls 1.0-1.2 mm Steel• User Interface• Flowmeter• Chain

Key Options • K10095-1-15M Remote control • K14126-1 Remote Control RC-42 (PF-22) • K14091-1 Remote Control MIG 7 m (PF-26) • K14121-1 User Interface U2 • K14123-1 User Interface U6 • K14124-1 Case of remote control • E/H-400A-70-xM Electrode holder, 400A – 70 mm² – 5/10 m • K2909-1 6-pin/12-pin adapter • K14132-1 5-pin/12-pin adapter • K14042-1 Adapter for spool type S200 • K363P Adapter for spool type Readi-Reel® • K10349-PG(W)-xM Interconnection cables • KP10519-8 Adapter TIG EURO • K10513-26-4 TIG Torch LT 26 G • FL060180600-L FLAIR 600 Gouging torch • K10343 Innershield® gun adaptor • K115-1/2 Innershield gun 450A – 82° – 3 mm – 3/4.6 m • K126-1/2 Innershield gun 350A – 62° – 1.6 mm – 3/4.6 m • K14152-1 Lincoln Analog-Digital Interface

LINCOLN ELECTRIC 3



N

rev.: E-WF03-EN-27-12-17


Digital

Features• Small rugged and easy to handle feeders; with bright digital meters (PF-41 excl.).• Utilises ArcLink® – the leading digital communication protocol for welding, making it

the best choice for seamless, time critical integration with the power source.• Four roll drive system with powerful motor.• Hot/Soft start Crater Run (PF-41 excl.) and all standard features.• Easy-to-understand user interface panels make it easy to set weld parameters.• Remote control on the gun (PF-46 & option for PF-44).• Features push-pull capability for great performance on aluminium (PF-46 & option for PF-44).• Equipped with wheels as standard.

The Power Feed wire feeder range is designed to combine easy handling and control by the welder with perfect wire feeding. Dependent on your application, the PF feeders are supplied as standard with a standard undercarriage but are available to be hung from a boom or placed on a special heavy duty undercarriage to be used in tough industrial conditions.The basic model PF-41 supports only CV MIG mode (5) but the rest of the range (PF-42/44/46) supports all modes installed on Multi-process or the advanced digital (ArcLink®) Lincoln power sources. The feeders are differentiated by User Interface (UI) and functions installed. The basic UI “U0” provides just control of Voltage and WFS where as the more advanced “U2” is equipped with bright digital meters, Trim function, mode selector and main starting/ending functions. The UI group “U4” & “U6” utilizes TFT colour display with intuitive icon language and variety of special functions. Top class feeder PF-46 with UI “U6” combines all functions with USB connection, Dual Procedure, Memory, Limits and also Light Switch inside the feeders which supports wire installation in dark, industrial conditions. All Power Feed 4X series can be optionally equipped with gas flow-meter, heavy duty undercarriage or lifting eye.

Power Feed® 41, 42, 44, 46Designed to work with digital power sources

Processes• MIG• Flux-Cored• Stick• TIG• Gouging

Recommended Power Sources• Power Wave® S350, S500, S700• Speedtec® 405S, 405SP, 505S, 505SP

Base Unit Includes• Drive rolls 1.0-1.2 mm Steel• User Interface

Key Options • K14121-1 User Interface U2 • K14122-1 User Interface U4 • K14123-1 User Interface U6 • K14124-1 Pendant box (12-pins) • K14127-1 Cart PF HD • K14128-1 Kit Lifting eye • K14125-1 Kit 12-pin socket (F) • K14120-1 Kit 6-pin socket (F) • K2909-1 6-pin(F) to 12-pin(M) Adapter for Remote Control – 0.5 m • K14111-1 Kit Gas flow meter • K14126-1 Remote Control RC-42 (2 pots) • K10095-1-15M Remote control – 15 m • K14091-1 Remote Control MIG 7 m • K870 Foot Amptrol • KP10519-8 Adapter TIG EURO • K14131-1 Arclink-T Flex • K14132-1 Adapter 5-pin(M)/12-pin(F) • KP14017-x Drive roll Kit range (4R) • K14152-1 Lincoln Analog-Digital Interface

LINCOLN ELECTRIC 3



N

INPUT OUTPUT Technical Specifications Standard Wire Feeders

Product Item Number Drive Roll Cooling Output Power Input

PowerWFS Range (m/min)



PF-41 K14163-1

4 A/W 500A@60% 40V DC 1.0-22 0.8-1.6 1.0-1.6

17

460 x 300 x 640PF-42 K14107-1 18

PF-44 K14108-1 18.5

PF-46 K14109-1 18.5

Functions & Features

Power Feed User Interface Graphic Display

Standard Controls

Meters Digital Crater Hot/Soft

StartPre-settings Synergic Memory/

LimitsLocking Function

PF-41 U0 TFT √ √ √ - √ - - -

PF-42 U2 - (LEDs) √ √ √ - √ √ - -

PF-44 U4 TFT √ √ √ √ √ √ - √

PF-46 U6 TFT √ √ √ √ √ √ √ √


SEMIAUTOMATIC WIRE FEEDERS

rev.: E-WF04-EN-25-09-17


SEMIAUTOMATIC WIRE FEEDERS Digital

Single and dual bench/boom wire feedersPower Feed® 84 Single & Dual


Product Item Number

Drive Roll Cooling Output

powerInput Power

WFS Range (m/min)



PF84 CE Single ONE PAK K3329-1-P

4 A/W 600A@60% 40V DC 2-30

0.6-1.6(high speed)

1.0-2.0(high speed) 25.8 450 x 430 x 770

PF84 CE Dual ONE PAK K3331-1-P 0.6-2.4

(low speed)1.0-3.0(low speed) 43.2 450 x 590 x 850

Processes• MIG• MIG Pulse• MIG STT• Flux-Cored• Stick• TIG

Recommended Power Sources• Power Wave® S350, S500• Speedtec® 405S, 405SP,

505S, 505SP

Basic Unit Includes• Spool Cover• Fast Mate Gun Adapter• Water Connection Kit• Twist Mate (Male) to Lug Adapter• Power Feed 84- U/I, No Reel, USB• Control Cable Asbly• Wire Reel Stand• Drive Roll, 1.2mm V-Groove• Drive Roll, 1.6mm V-Groove

Key Options • K3336-3 PF84 – Bench to Boom conversion • KP1505-x Drive roll kit range (Steel & Cored) • KP1507-x Drive roll kit range (Aluminium) • D-1901-076-1R & D-1319-010-1RAdapter for gas quick connector

The Power Feed® 84 wire feeder is revolutionary in its ease of use and flexibility. Designe to maximize the capabilities of the Power Wave® S range, the combination of high-tech power source and wire feeder, out perform traditional arc welding methods. The Power Feed® 84’s design allows the control box to be placed anywhere – near the work piece or on top of the power source. The Power Feed® 84 Dual is designed for shops that require welding flexibility and superior welding performance in one complete wire feeder package. Dual feeder allows two different types of wire on the feeder, allowing you to weld stainless or aluminum from one power source. Combine this wire feeder flexibility with one of Lincoln’s new Power Wave® power sources, and gain the capability to MIG weld, STT weld or Pulse weld with ease.

INPUT OUTPUT

Premium Welding Solution with a Portable Design!

Features• Hardened and Construction Ready. Built tough

for rough environments. From construction to shipbuilding, this design will meet your expectations. Packaged standard with either a durable aluminium or plastic case.

• Internal Lighting. High intensity LEDs illuminate the wire drive.

• Internal heating maintains control of humidity on your consumable by keeping the package warmed and protected in an enclosed case.

• Mode Select Panel (MSP4) allows easy access to the Power Wave® library of waveforms. Advanced controls and set-up options are only a fingertip away!

• Dual Procedure and Memory Buttons allow you to set-up an A and B procedure to simplify “on the-fly” switching!

Power Feed® 25M


Product Item Number Drive Roll Gearing Input Power WFS Range

(m/min)Wire Size Range (mm) Weight

(kg)Dimensions HxWxD (mm)Solid Cored

Power Feed® 25M (Aluminium case) K2536-4

2

Standard Speed (factory setting)

40V DC2.5-20.3

0.6-1.60.8-2.0

15.9 368 x 216 x 597Power Feed® 25M (Plastic Case) K2536-5 Extra Torque 1.3-10.4 0.8-2.4

Processes• MIG• Stick• Pulsed MIG• TIG• MIG-STT®• Gouging• Flux-Cored

Basic Unit Includes• Electrode Pigtail• MSP4 Panel• Dual Procedure/Memory Panel• Push-Pull Gun Connector• Remote Control Connector• Gun Receiver Bushing• Standard & Extra Torque Gearing

Lincoln Electric offers this full featured design in a robust package that can meet industry challenges. The lightweight construction, durable case, as well as the patented design of the MAXTRAC® wire drive system deliver the results you need.

INPUT OUTPUT


Digital

LINCOLN ELECTRIC 3



N

Features• World-class arc performance on steel, stainless

steel, aluminium and other materials.• Waveform Control Technology® featuring patented

processes such as Pulse-On-Pulse® (for a TIG-like bead appearance) and Power Mode® (for a stable arc at low current levels).

• Utilises ArcLink® – the leading digital communication protocol for welding, making it the best choice for seamless, time critical integration with the power source.

• Pulsed MIG process – great for low spatter, low heat input and out-of-position applications – makes virtually any operator a better welder!

• Easy-to-understand user interface panel with large numeric displays make it easy to set weld parameters.

• Features push-pull capability for great performance on aluminium.


rev.: E-WF05-EN-25-09-17

Processes• MIG• Innershield

Recommended Power Sources• All CV sources and Engine driven

welders

Key Options • K10194-xM Weld power cables (LN25 Pro) • K1841-x Weld power cables (LN25 Pro Dual) • K115-1/2 Innershield gun 450A – 82° – 3mm – 3/4.6 m • K126-1/2 Innershield gun 350A – 62° – 1.6 mm – 3/4.6 m • KP1696-045S Drive roll kit solid wire 1.2 mm • KP1696-x Drive roll kit range • KP1697-x Drive roll kit range • K489-9 Fast-Mate Adaptor Kit • K2596-2 Replacement case • K2330-2 Preflow, Postflow and Burnback timer kit • K435 Spindle adapter for 6.3 kg coils • K14095-1 Adapter 8/14-pin


SEMIAUTOMATIC WIRE FEEDERS Field

Field

LN-25 Pro & Pro DualPortable construction wire feederBuilt upon the tradition and success of the LN™-25, the new LN™-25 PRO is designed to be simple, reliable and easy to service. The LN™-25 PRO is ideal for field construction and fabrication, shipyards and rental companies. The MAXTRAC® wire drive enhances performance while the replacement case (and many other upgrade options) can be installed in less than five minutes.The LN™-25 PRO is available in 2 models: Standard & Dual Pro. • The Standard model can be powered across the Arc the

feeder utilises the Arc voltage to drive the feeder. • The Dual Pro model features a voltage control knob

for superior arc control, digital meters for increased monitoring, MIG-STT® capability and can be powered with either a control cable or across the arc.

Features• Performance – all models: 2-Step/trigger interlock

provides comfort for long welds sturdier and rugged spindle design with an incorporated brake.

• Performance – standard: analog voltmeter with polarity indicator LED automatically adjusts to welding polarity.

• Performance – dual power model: digital meters for accurate monitoring, display shows wire feed speed or amperage and welding voltage.

• Reliability: lightweight, impact and flame resistant polycarbonate case design keeps the internal components protected. Potted and trayed PC board protects against moisture and corrosion. Reel locking mechanism eliminates spindle cross threading.

• Serviceability: case can be replaced in less than 5 minutes – eliminates downtime. INPUT OUTPUT


Product Item Number

Drive Roll Cooling Input Power WFS Range

(m/min)Wire Size Range (mm) Weight

(kg)Dimensions HxWxD (mm)Solid Cored

LN 25 Pro K2613-52 A

15-110V DC1.3-17.7 0.6-1.6 0.8-2.0 16 381 x 221 x 599

LN 25 Pro Dual K2614-8 15-110V DC or 24-42V AC

INPUT OUTPUT

Full control with no control cables

Features• Remotely controls preset voltage without

a control cable.• Trigger Interlock switch provides

operator comfort over long welds.• Arc Hour Meter for tracking maintenance and

productivity.• Digital Meters display voltage, current

and wire feed speed.

• Industry-proven Maxtrac® Wire Drive System provides reliable feeding and easy changeovers.

• Fully encapsulated and environmentally protected electronics.

• Replaceable flame resistant case can be installed in under five minutes.

LN-25X with CrossLinc™ Technology Processes• MIG• Flux-Cored

Recommended Power Sources• Flextec 350XKey Options • K126-1/2 Innershield gun 350A – 62° – 1.6 mm – 3/4.6 m • K1796-x Coaxial Weld Power Cable • K1840-x/K1841-x/K1842-x Weld power cable • KP1696-x Drive roll kit range • KP1697-x Drive roll kit range • K489-7 Fast-Mate Adaptor Kit • K2596-1 Replacement case • K2330-2 Preflow, Postflow and Burnback timer kit • K435 Spindle adapter for 6.3 kg coils

Safety – Reduce job site clutter by removing cumbersome control cables. Quality – Full voltage control at the feeder results in the correct settings for every weld.Productivity – Minimize rework with easy settings adjustment. Reliability – Fully encapsulated and environmentally protected electronics.


Product Item Number Drive Roll Cooling Input Power WFS Range (m/min)



LN-25X K4267-1 2 A 15-110V DC 1.3-17.7 0.6-1.6 0.8-2.0 18.37 381 x 221 x 599

LINCOLN ELECTRIC 3



N

rev.: E-WF06-EN-27-12-17


Field

Features• Weighs less than 23 kg including optional Magnum®

Innershield® gun and 14 lb (6.3 kg) coil of electrode.• Continuous wire feed speed control, voltage control and

analog voltmeter are standard.• Completely enclosed wire reel keeps the wire free of

contaminants.• Equipped with trigger interlock circuit to reduce

operator fatigue.• Gun-mounted two-position switch allows on-the-fly

change to 83% of the preset wire feed speed.• Electrode and control cable quickly connect to power source.• One or two LN 23P wire feeders can be directly connected to

recommended Lincoln power sources, but only one can be used at a time.

Built for the jobThe LN 23P semiautomatic wire feeder is able to handle the toughest work sites and is an excellent choice for pipe welding applications. It is portable, easy to setup and ideal for reaching difficult locations.

LN 23P Processes• Innershield

Base Unit Includes• Drive roll kit 1.0-1.2 mm,• Water connection kit

Recommended Power Sources• DC 400• V350 PRO

Key Options • K10093-xM Interconnection cables • K345-10 Innershield gun 350A – 62° – 1.6 to 2 mm – 3 m • K350-2 Adapter kit


LINCOLN ELECTRIC 3



N

INPUT OUTPUT



Output Input Power WFS Range (m/min)


Dimensions HxWxD (mm)Cored

LN 23P K316L-6 2 A/W 350A/60% 14-50V DC 0.76 – 6.7 1.7-2.0 12.3 521 x 229 x 483

WELDING HELMETSVIKINGBuilt for demanding specifications. Lightweight, solar-powered Viking helmets come in many designs.

To choose one for yourself, see helmets section of this catalogueor visit our website: www.lincolnelectriceurope.com

rev.: E-WF07-EN-17-10-16



REMOTE PENDANTS

Foot Amptrol™ Connector KitProvides 7.6 m of remote output control for TIG welding. (6-pin plug connection).Item n°:K2320-1

Accessories

GAS SOLENOID AND BURNBACK KITSPreflow, Postflow and Burnback Timer KitProvides adjustable delay of power source output shut off to prevent electrode sticking in crater when using high wire feed speeds.Item n°:K2330-2 for LN-25 PRO, LN-25 PRO Dual Power

WATER CONNECTION KITSWater Connection KitIncludes quick connect fittings on front and back of wire drive for use with water-cooled guns and coolers. Kit provides for one gun.Item n°:K590-6

CONTROL CABLES AND ADAPTERS

STANDS AND UNDERCARRIAGES

Heavy Duty Wire Reel StandFor use with Lincoln 4.5-27.2 kg wire packages that use a 51 mm spindle. Hole in stand fits over lift bail.Item n°:K1524-3

Caster Kit – Light DutyMounts to the Heavy Duty Wire Reel Stand. Allows easy movement of wire feeder.Item n°:K1556-1

Insulated Lift BailAllows the entire wire feeder to be hung from a crane or hook. Use with Heavy Duty Wire Reel Stand.Item n°:K1555-1

,Description Connection Order No.

Wire Feeder Control Cables

Wire Feeder Control Cable Male 14-pin to Female 8-pin K10093-15M (for LN-23P )Wire Feeder Control Cable Fast-mate (x2), gas hose, protection K10347-xM (for LF )Wire Feeder Control Cable Fast-mate (x2), gas hose, protection K10370-xM (for LF )

Extensions and Adapters

Wire Feeder Control Cable Extension(May require K1501-10, depending on the feeder)

Male 14-pin to Female 14-pin K1797-10 (3 m)K1797-50 (15.2 m)K1797-100 (30.4 m)

Adapter Cable for Control Cable to Terminal Strip of Power Source

Female 14-pin control cable to terminal strip

K1798

ArcLink®/Linc-Net™ Control Cables

ArcLink®/Linc-Net™ Control Cables For Power Wave®/Power Feed® Systems K1543-8 (2.5 m)K1543-25 (7.6 m)K1543-50 (15.2 m)K1543-100 (30.4 m)

Heavy Duty ArcLink®/Linc-Net™ Control Cables

For Power Wave®/Power Feed® Systems K2683-25 (7.6 m)K2683-50 (15.2 m)K2683-100 (30.4 m)

14-pin Cables

Submerged Arc Equipment For synchronizing Power Wave® AC/ DC 1000® SD and connecting MAXsa™ Heads

K1785-4 (1.2 m)K1785-8 (2.4 m)K1785-16 (4.9 m)K1785-25 (7.6 m)K1785-50 (15.2 m)K1785-100 (30.4 m)

rev.: E-WF08-EN-17-10-16



Connection Description Order No.

Twist-Mate™ to Lug 1/0, 350A, 60% duty cycle, 3.0 m K1840-10

Lug to Lug 3/0, 600A, 60% duty cycle, 3.0 m K1842-10

3/0, 600A, 60% duty cycle, 10.6 m K1842-35

3/0, 600A, 60% duty cycle, 18.2 m K1842-60

4/0, 600A, 60% duty cycle, 33.5 m K1842-110

Twist-Mate™ to Twist-Mate™

1/0, 350A, 60% duty cycle, 7.6 m K1841-25

2/0, 300A, 60% duty cycle, 10 m EXT-50-10M

WELD POWER CABLES

ADAPTERS AND PACKAGESTwist Mate™ to Lug AdapterFor connection of lugged cable to Twist Mate™ connectors, 457 mm long.Item n°:K2176-1

Twist Mate™ Cable PlugFor connecting welding cable to output terminal receptacles.Item n°:K852-70 for 50-70 mm2 cableItem n°:K852-95 for 95 mm2 cable.

WELD CABLESCoaxial Weld Power CablesRecommended for STT® and pulse welding when using long distances between feeder and power source.

Item n°:K1796-25 7.6 m, 350 ampsItem n°:K1796-50 15.2 m, 350 ampsItem n°:K1796-75 22.8 m, 325 ampsItem n°:K1796-100 30.4 m, 300 amps

WIRE ADAPTERS, COVERS AND STRAIGHTENERS200 mm O.D. Spool AdapterPermits 200 mm O.D. spools to be mounted on 51 mm O.D. spindles.Item n°:K468

6 kg Innershield® Coil AdapterPermits 6 kg Innershield® electrode coils to be mounted on 51 mm O.D. spindles.Item n°:K435

10-14 kg Readi-Reel® AdapterAdapts 10-14 kg Lincoln Electric Readi-Reels® of electrode to 51 mm spindle.Item n°:K363P

15 kg Stein basket adaptorItem n°:K10158-1

22.6-27.2 kg Coil AdapterAdapts 22.6-27.2 kg coils of Lincoln Electric electrode to 51 mm spindle.Item n°:K1504-1

Plastic Wire Cover KitPlastic enclosure for 13.6-19.9 kg wire packages.Item n°:K1634-1

Plastic Wire Cover KitPlastic enclosure for up to 27.2 kg wire packages.Item n°:K1634-2

Wire StraightenerStraightens wire for better, smoother feeding.Item n°:K1733-1

Spindle Adapter for Readi-Reels® and Spools51 mm O.D. spindle for mounting Readi-Reels® and 51 mm I.D. spools up to 27.2 kg capacity to custom installations.Item n°:K162-1

Polycarbonate Portable Feeder CaseReplace a damaged case without replacing the entire unit.Item n°:K2596-2

Accessories


K10429-15-xM 3 m, 4 m or 5 m• LGS 250G, 200A @ 60%

K10429-25-xM 3 m, 4 m or 5 m• LGS 360G, 300A @ 60%

K10429-36-xM 3 m, 4 m or 5 m


K10429-505-xM 3 m, 4 m or 5 m


rev.: E-WF09-EN-27-12-17



4-Roll Wire Drive

Systems

2-Roll Wire Drive

Systems

POWERTEC® 305C Pro, 355C Pro, 425C Pro, Power Feed® 40, Power Feed® 42, Power Feed® 44, Power Feed® 46, LF-24M, LF-24MPro, LF-33S, LF-33

Description Product Number

Solid Wire (includes stainless steel)

0.6-0.8 mm KP14017-0.8

0.8-1.0 mm KP14017-1.01.0-1.2 mm KP14017-1.21.2-1.6 mm KP14017-1.6

Cored Wire

0.9-1.1 mm KP14017-1.1R1.2-1.6 mm KP14017-1.6R1.6-2.4 mm KP14017-2.4R

Aluminium Wire

1.0-1.2 mm KP14017-1.2A1.2-1.6 mm KP14017-1.6A

NA-3S, NA-4, NA-5


Solid Wire

2.4-5.6 mm KP1899-11.6, 2.0, 2.4 mm KP1899-20.9, 1.2, 1.4 mm. KP1899-3

Cored Wire

1.0-1.4 mm KP1899-4

Knurled Drive Roll

2.4-5.6 mm KP1885-11.6-2.4 mm KP1886-1Outgoing Guide2.4-5.6 mm KP1963-1Incoming Guide2.4-5.6 mm KP2116-2

2-Roll Wire Drive

Systems

2-Roll Wire Drive

Systems

POWER WAVE® C300, LN-25 PRO,

LN-25 PRO Dual Power and LN 25X



0.6-0.8 mm KP1696-030S

0.9 mm KP1696-035S

0.9, 1.2 mm KP1696-1

1.0 mm KP1696-21.2 mm KP1696-045S1.4 mm KP1696-052S1.6 mm KP1696-1/16S

Cored Wire

0.9-1.1 mm KP1697-035C1.0-1.2 mm KP1697-045C1.2 mm KP1697-052C1.4 mm KP1697-052C1.7-1.8 mm KP1697-0682.0 mm KP1697-5/642.4 mm KP1697-3/32

Aluminium Wire

0.9 mm KP1695-035A1.0 mm KP1695-040A1.2 mm KP1695-3/64A1.6 mm KP1695-1/16A

POWERTEC® 161C, 191C, 231C, 271C, 205C, 255C, 305C, LF-22M



0.6-0.8 mm KP14016-0.80.8-1.0 mm KP14016-1.01.0-1.2 mm KP14016-1.2

Cored Wire

0.9-1.1 mm KP14016-1.1R1.2-1.6 mm KP14016-1.6R

Aluminium Wire

1.0-1.2 mm KP14017-1.2A

LN-23P


Solid Wire

0.6-0.9 mm KP653-025S0.8 mm KP653-030S0.9-1.0 mm KP653-035S1.2-1.4 mm KP653-052S

Cored Wire

0.9 mm KP653-035C1.2-1.4 mm KP653-052C

Cored or Solid Wire

1.6 mm KP653-1/161.7-2.4 mm KP653-3/322.4 mm KP1505-3/321.0-1.2 mm KP14017-1.2AHardfacing2.8 mm KP653-7/64H

DRIVE ROLL AND GUIDE TUBE KITS

DRIVE ROLL AND WIRE GUIDE KITS

PF 22, PF26


Solid Wire

0.6-0.8 mm KP14150-V06/080.8-1.0 mm KP14150-V08/100.9-1.1 mm KP14150-V09/111.0-1.2 mm KP14150-V10/121.2-1.6 mm KP14150-V12/161.4-2.0 mm KP14150-V14/201.6-2.4 mm KP14150-V16/24

Cored Steel Wire

0.9-1.1 mm KP14150-V09/11R1.0-1.2 mm KP14150-V10/12R

1.2-1.6 mm KP14150-V12/16R

1.4-2.0 mm KP14150-V14/20R1.6-2.4 mm KP14150-V16/24R

Aluminium Wire

0.6-0.8 mm KP14150-U06/08A0.8-1.0 mm KP14150-U08/10A1.0-1.2 mm KP14150-U10/12A1.2-1.6 mm KP14150-U12/16A1.6-2.4 mm KP14150-U16/24A

rev.: E-WF10-EN-25-09-17


SUBMERGED ARC EQUIPMENT Ideal For Heavy Duty Hard Automation Applications Maximum Control Over Welding ParametersDesigned To Deposit More Weld Metal At Fast Travel Speeds



Digi

tal W

ire Fe

eder

Anal

og P

ower

Sou

rce

Anal

og W

ire Fe

eder

s

Digi

tal P

ower

Sou

rce

Digi

tal W

ire Fe

eder

Submerged Arc Equipment

Idealarc® AC-1200Automatic Submerged Arc Welding Power Source

Idealarc® DC-1000, Idealarc® DC-1500Industrial DC Multi-process welders

Cruiser® & Tandem Cruiser®Submerged Arc Welding Tractor

MAXsa™ 10 controllerArcLink® – enabled Controller for Power Wave® AC/DC 1000® SD Systems

Power Wave® AC/DC 1000® SDIncreased productivity, quality and flexibility

MAXsa™ 22 Feed HeadSubmerged Arc Hard Automa-tion Wire Drive for Power Wave® AC/DC 1000® SD Systems

MAXsa™ 19 controllerSubmerged Arc Systems for Integrators and Robotic Ap-plications for Power Wave® AC/DC 1000® SD Systems

MAXsa™ 29 Feed HeadSubmerged Arc Systems for Integrators and Robotic Applications for Power Wave® AC/DC 1000® SD Systems

NA-3, NA-4 & NA-5 Control & HeadsAutomatic welding systems

LT-7 TractorSubmerged Arc DC Wire Feeder

Analog Wire Feeders

Analog Power Source

Mod

e

Pola

rity

Out

put

Rang

e (A

mps

)

Volt

age

(V)

Subm

erge

d Ar

c

Flux

-cor

ed

Arc

Goug

e

Wav

efor

m C

ontr

ol

tech

nolo

gy®

ArcL

ink®

Dig

ital

co

mm

unic

atio

ns

Prod

ucti

on

mon

itor

ing

War

rant

y (y

ears

)

OUTPUT INPUT PROCESS FEATURESDigital Power Source

Solid

Core

d

MIG

Flux

-cor

ed

Subb

mer

ged

Arc

ArcL

ink®

Dig

ital

co

mm

unic

atio

ns

Wav

efor

m C

ontr

ol

tech

nolo

gy®

Dig

ital

dis

play

WIRE FEED SPEED RANGE (m/min) WIRE SIZE RANGE (mm) PROCESS FEATURESDigital Wire Feeder

Power Wave® AC/DC 1000® SD CC/CV AC/DC 100-1000 380/400/460/500/575 ● ■ ■ ■ 3

Idealarc® DC-1000 CC/CV DC 150-1300 200/380/440 ● ● ● 3

Idealarc® DC-1500 CC/CV DC200-1500

380/440 ● ● ● 3

Idealarc® AC-1200 CC AC 380/415/440/460 ● 3

Cruiser® & Tandem Cruiser® 0.4-12.5

1.6-5.6

- ● ■ ■ ■

MAXsa™10 controller - - ● ■ ■ ■

MAXsa™ 22 Feed Head 0.25-12.7 - ● ■ ■ ■

MAXsa™ 19 controller - - ● ■ ■ ■

MAXsa™ 29 Feed Head 0.25-12.7 - ● ■ ■ ■

NA-3 Control & Heads 0.6-15.2 0.9-5.6 1.1-4.0 ● ● ●

NA-4 Control & Heads subject to arc voltage 1.6-5.6 - ●

NA-5 Control & Heads 0.6-19.7 0.9-5.6 1.1-4.0 ● ● ● ■

LT-7 Tractor 2.5-10.2 2.4-4.8 - ●

rev.: E-SAW01-EN-17-10-16

Processes• Submerged arc

RecommendedWire Feeders • K3048-2 Cruiser™ Tractor • K3083-1 Tandem Cruiser™ • K2814-4 MAXsa® 10 Controller • K2370-2 MA Xsa® 22 Feed Head

Key Options • K2444-3 CE Filter (Required option for UE) • K1811-x Heavy Duty Process Sense Lead – 15/30 m • K2683-x Heavy Duty ArcLink® Control Cable – 7.5/15/30 m • K1785-x Control Cable (Heavy Duty) – 3.5/7.5/15 m • K285 Concentric Flux Cone Assembly • K231-1 Contact Nozzle Assembly for 2.4, 3.2, 4.0 mm Wire • K148A Positive Contact Nozzle Assembly for 2.4-3.2 mm Wire • K148B Positive Contact Nozzle Assembly for 4.0-4.8 mm Wire


OUTPUT

INPUT


Product Item Number Input Power Output

Range (A) Rated Output Input Current @ Rated Output

Weight (kg)


Power Wave®AC/DC1000® SD K2803-1* 380/400/460/500/575V/3/50/60 100-1000 1000A/44V/100% 82/79/69/62/55 363 1250 x 488 x 1174

*(1)Filter is required to meet CE conducted emission requirements. The K2444-3 must be used with the K2803-1.

Features• 380-575 VAC, 50/60 Hz Voltage Input – offers the

ability to be connected anywhere in the world.• No hardware reconfiguration required with easy

polarity switching – eliminates downtime.• Easy to parallel machines or run multiple arcs.• 3-Phase voltage Input – eliminates the imbalance

associated with transformer-based AC welding machines.

• 95% power factor correction – enables connection of multiple machines on the same plant infrastructure for lower installation costs.

• Severe duty – can be stored outdoors. IP23 rated.• ArcLink®, ethernet and DeviceNet™ communication

– offers remote process monitoring, control and troubleshooting.

• True Energy™ – measures, calculates and displays instantaneous energy in the weld for critical heat input calculations.

Increased productivity, quality and flexibilitySoftware-driven output delivers maximum control over the deposition rate and penetration in single or multi-arc environments.

Power Wave® AC/DC 1000® SDDigital Power SourceSUBMERGED ARC EQUIPMENT



• Production Monitoring™ 2.2 – track equipment usage, store weld data and configure limits to assist in welding efficiency analysis.

• Software based controls – can be upgraded as new features become available.

• iARC™ digital control – 90 times faster than the previous generation, delivering a responsive arc.

LINCOLN ELECTRIC 3



N


Product Item Number

Input Power

Rated Output

Travel Speed (m/min) Gear Box Wire Feed Speed

range (m/min)Wire Size Range (mm)

Weight (kg)


Cruiser Tractor K3048-2 40V DC 1000A /

100% 0.25-2.5142:195:1(1)

57:1(1)

0.4-5.00.4-7.61.3-12.7

2.4-5.61.6-3.21.6-2.4

94 736 x 584 x 914

Tandem Cruiser™ Tractor K3083-1 136 927 x 1156 x 1054

(1) Optional


Unit Includes• Conduit Tubing, 1.5 m• 4 mm, 600 amps Contact Nozzle

Assembly; 4 mm. Contact Tip• Nozzle Extension 127 mm• Curved Nozzle Extension, 45°• Nozzle Extension Insulator• Flux Tubing and Hose Clamps• Wire Reel Assembly• Wheels for Track Operation• Front and Rear Outriggers• Enclosed Wire Reel (2 for Tandem)Note: Does not include a control cable.

Key Options • K1733-5 Wire Straightener • K396 Track Section • K3070-1 Tiny Twin Kit

Features• Reliable operation – strong, rigid and stiff, especially

when you need it most:- Sturdy welded base frame.- Substantial steel mast stands up to daily

construction site use.- Simple cast wheels – equipped with high

temperature and slip resistant rubber tires.- Robust tube and clamp design – trouble-free

feeding component mounting.- Adjustable extended length outriggers – make it

easy to guide tractor movement.• Advanced control pendant – removable, lightweight,

impact resistant aluminium user interface can be

The self-propelled, modular Cruiser™ and Tandem Cruiser™ travel carriages can deliver deposition rates up to 13 kg per arc, per hour for butt and fillet joints on lengthy plate welding applications common in bridge or barge decking, large tank fabrication or shipbuilding.

Submerged Arc Welding Tractor

Digital Wire Feeder

Cruiser® & Tandem Cruiser®

INPUT OUTPUT

used to save procedures, apply limits and lockouts for any or all controls.

• Multiple configurations – flexible system allows set up with or without a track and three- or four-wheel operation. Tandem model not recommended for three wheel operation.

LINCOLN ELECTRIC 3



N

rev.: E-SAW02-EN-25-09-17


SUBMERGED ARC EQUIPMENT



LINCOLN ELECTRIC 3



N


Product Item Number Input Power Rated Output Gear Box Wire Feed Speed

range (m/min)Wire Size Range(1)

Solid (mm)Weight (kg)


MAXsa™ 22 Head K2370-2 40V DC 1000A / 100%

142:195:1(1)

57:1(1)

0.4-5.00.4-7.61.3-12.7

2.4-5.61.6-3.21.6-2.4

36.3 305 x 355 x 254

(1) 142:1 gear box is standard. Conversion Kit supplied for conversion to 95:1 with Wire Drive (K2370-2, K2312-2, or K2311-1)


Unit Includes• Adjustable wire straightener• Cross-seam adjuster• Electrical valve flux hopper• Mounting bracket

Key Options • K2163-60 Weld Power Cable, 18 m • K1842-110 Weld Power Cable, 33 m • K219 Flux Hopper Assembly • K231-1 Contact Nozzle (2.4, 3.2, 4.0 mm) • K148A Positive Contact Nozzle (2.4-3.2 mm) • K148B Positive Contact Nozzle (4.0-4.8 mm) • KP2721-1 Nozzle Extension, 5 inches • K149-5/32 Nozzle Extension (4.0 mm) • K386 Narrow Gap Nozzle • KP2108-1B1 Contact tip • K285 Concentric Flux Cone Assembly • K225 Sub Arc Twinarc® Nozzle for 2.0-2.4 mm • K129-x Tiny Twinarc® (1.6/2.0/2.4 mm) • K281 Tiny Twinarc® Solid Wire Straightener • K162-1 Spindle Kit, 2 Inch Hub • K29 Vertical Lift Adjuster, 100 mm • K96 Horizontal Adjuster, 50 mm • K278-1 Spreadarc Oscillator

Features• Flexible configuration – can be used in single, tandem,

Twinarc® or multiple arc applications.• Closed loop speed control – facilitates full control

over starting, running and stopping wire feed speed.• IP23 rated – tested to withstand harsh environments.• Standard conversion kits – used to change the speed

ratio to match the requirements of your application.

Designed specifically for hard automation applications, the MAXsa® 22 Wire Drive delivers accurate wire feeding of submerged arc wires. Based on Lincoln’s proven gearbox and extruded aluminium feedplate, the MAXsa® 22 model features a 32VDC permanent magnet, high torque motor that delivers plenty of torque to push up to 5.6 mm diameter solid wire. A top speed of up to 12.7 m/min can be achieved by changing the gear ratio.

Submerged Arc Hard Automation Wire Drive for Power Wave® AC/DC 1000® SD Systems

Digital Wire Feeder

MAXsa™ 22 Feed Head

INPUT OUTPUT

• Multi-axis rotation – rotational feed head adjustment in two planes allows flexible, accurate setup for fixturing or arc locating. Additional positioning flexibility can be achieved with the optional horizontal and vertical lift adjuster.


Product Item Number Input Power Weight (kg) Dimensions HxWxD (mm)

MAXsa™ 10 K2814-4 40V DC 11.3 381 x 259 x 102

LINCOLN ELECTRIC 3



N

Digital Wire Feeder


RecommendedPower Source• Power Wave® AC/DC 1000® SD

Key Options • K2462-1 MAXsa® 10 Mounting Bracket (only required for TC-3 Travel Carriage)

Features• Severe duty ready – the controller is IP23 rated and

ready for operation in harsh environments.• Pendant box – mount the controller in the standard

protective box or remove the pendant for hand-held operation. Extend hand-held operation from 1.2 m up to 30.5 m with an ArcLink® extension cable.

• Eight procedure memories – pre-set and save your optimal welding parameters for repeating applications and recall later for fast changeovers.

• User-friendly controls – clear digital display and controls make it easy to set weld modes, AC operation, strike/start/end options, travel stop/start, timers and other parameters.

• Limit control – apply operator procedure limits or lockout on any or all parameters.

The MAXsa® 10 controller offers a single monitoring and control point for the entire hard automation welding system. Operators have full control over AC and DC welding parameters and easy PLC interfacing to control fixture travel, timers and other system commands.

ArcLink® – enabled Controller for Power Wave® AC/DC 1000® SD SystemsMAXsa™ 10 controller

INPUT OUTPUT

• Waveform Control Technology® – allows the user to choose from a library of pre-programmed weld modes. Parameters for each mode can be adjusted within a limited range to achieve optimal balance between deposition rate and penetration.

rev.: E-SAW03-EN-25-09-17



OUTPUTINPUT

LINCOLN ELECTRIC 3



N


Features• Compact size – makes it easy to position in custom

integrator solutions.• Fast digital communication – with the Power Wave®

AC/DC 1000® SD via ArcLink® cable and to the wire drive via a 14-pin control cable.

• Standard I/O connector block – for start/stop, forward/reverse feed and shutdown input interfacing with external accessories.

Submerged Arc Systems for Integrators and Robotic Applications for Power Wave® AC/DC 1000® SD SystemsThe MAXsa® 19 controller is specifically designed to relay wire feed commands to the MAXsa® 29 when a customer-supplied user interface is used in place of the MAXsa® 10 controller. Typically, this occurs in a variety of third party integrator solutions that include integration hardware like turning rolls, panel lines, seamers and pipe mills fixturing.

MAXsa™ 19 ControllerDigital Wire Feeder



• Standard status indicator – aids diagnostic system troubleshooting.

• IP23 rated – tested to withstand harsh environments.

LINCOLN ELECTRIC 3



N


Product Item Number

Input Power Rated Output Gear Box (1) Wire Feed Speed

Range(1) (m/min)Wire size Range (1)

Solid (mm)Weight (kg)


MAXsa™ 29 Head K2312-2 40V DC 1000A / 100%142:195:1(1)

57:1(1)

0.4-5.00.4-7.61.3-12.7

2.4-5.61.6-3.21.6-2.4

35 330 x 406 x 254

(1) 142:1 gear box is standard. Conversion Kit supplied for conversion to 95:1 with Wire Drive (K2370-2, K2312-2, or K2311-1)


Key Options • K2163-60 Weld Power Cable, 18 m • K1842-110 Weld Power Cable, 33 m • K219 Flux Hopper Assembly • K231-1 Contact Nozzle (2.4, 3.2, 4.0 mm) • K148A Positive Contact Nozzle (2.4-3.2 mm) • K148B Positive Contact Nozzle (4.0-4.8 mm) • KP2721-1 Nozzle Extension, 5 inches • K149-5/32 Nozzle Extension (4.0 mm) • K386 Narrow Gap Nozzle • KP2108-1B1 Contact tip • K285 Concentric Flux Cone Assembly • K225 Sub Arc Twinarc® Nozzle for 2.0-2.4 mm • K129-x Tiny Twinarc® (1.6/2.0/2.4 mm) • K281 Tiny Twinarc® Solid Wire Straightener • K162-1 Spindle Kit, 2 Inch Hub • K29 Vertical Lift Adjuster, 100 mm • K96 Horizontal Adjuster, 50 mm • K278-1 Spreadarc Oscillator

Features• Closed loop speed control – facilitates full control

over starting, running and stopping wire feed speed.• 32V DC permanent magnet, high torque motor

– delivers plenty of torque to push up to 5.6 mm diameter solid wire. Top speed of up to 12.7 m/min can be achieved by changing the gear ratio.

• IP23 rated – tested to withstand harsh environments.• Standard conversion kits – used to change the speed

ratio to match the requirements of your application.• Standard adjustable wire straightener.

The compact MAXsa® 29 Feed Head is intended for integrator solutions, as well as the latest submerged arc robotic applications.

Submerged Arc Systems for Integrators and Robotic Applications for Power Wave® AC/DC 1000® SD Systems

Digital Wire Feeder

MAXsa™ 29 Feed Head

INPUT OUTPUT

• Multi-axis rotation – rotational feed head adjustment in one plane allows flexible, accurate setup for fixturing.


Product Item Number Input Power Weight (kg) Dimensions HxWxD (mm)

MAXsa™ 19 K2626-4 40V DC 3.2 229 x 267 x 76

rev.: E-SAW04-EN-17-10-16



Features (Idealarc® DC1000)• 500 amp output connections provide enhanced arc

characteristics for low amperage flux-cored (FCAW) and MIG welding procedures.

• Single range control for precise output control and easy operation.

• Terminal strip and output studs for remote connections and cable.

• Low profile case allows installation of a work-bench and stacking up to 2 machines to conserve floor space.

• Removable side panels for easy access to internal parts.

• Line voltage compensation maintains weld consistency, even with line voltage changes of ±10%.

• Internal components, including windings, rectifiers and circuit boards, are coated to protect against the effects of moisture and corrosion.

• Seven-year warranty on power rectifier.

Features (Idealarc® DC1500)• Full range output voltage control for easy operation

and precise output control.• Mode switch used to select the desired output

characteristics for the process being used.• Line voltage compensation for maintaining weld

consistency, even with line voltage changes of ±10%.• Fan cooled with electronic and thermostatic protection

from current overload and excessive temperatures.• Function lights built into the printed circuit boards

speed diagnostics.• Windings and rectifiers protected against moisture

and corrosive environments.• Removable side panels for easy access to internal

parts.• Recessed front panel protects operating controls.• Terminal strip and output studs for remote

connections and cable.• Seven-year warranty on power rectifier.

Analog Power Source

INPUT OUTPUT



Current Range (A) Rated Output Input Current

@ Rated OutputWeight (kg)


Idealarc® DC-1000 K1387-3 200/380/440V/3Ph 150-13001250A/44V/50%1140A/45V/60%1000A/44V/100%

193/112/97 372 781 x 567 x 991

Idealarc® DC-1500 K1383-4 380/440/3Ph 200-1500 1500A/60V/100% 184 644 1453 x 566 x 965

Processes• Submerged arc• Flux-Cored• Gouging

RecommendedWire Feeders• NA-3• NA-5• LT-7

Key Options • K10376 Adapter M14/Dinse(F) • FL060180600-L FLAIR 600 Gouging Torch • K2187-2 Water cooler COOL ARC® 40 (DC-1000) • K10420-1 Coolant Acorox (2x5l) (DC-1000) • K1897-1 Paralleling Kit (DC-1000) • K1900-1 Paralleling Kit (DC-1500) • K1520-2 42 Volt Transformer Kit (DC-1000) • K857 Remote Output Control, 7.6 m • K857-1 Remote Output Control, 30 m • K843 Amptrol™ Adapter Kit • K1798 Adapter Cable – Male 14-pin (DC-1000) • K1770-1 Factory Undercarriage (DC-1000) • K1737-1 All-Terrain Undercarriage (DC-1000) • K3019-1 Arc Tracker™ (DC-1000)

If an application requires pure welding power combined with multi-process power, then the Idealarc® DC-1000 with 1300 amps of smooth DC output is your best investment. Designed for Semi-automatic and automatic welding, the precise control of the Idealarc® DC-1000 provides superior MIG, flux-cored, submerged-arc welding and excellent air carbon arc gouging with up to 16.0 mm diameter carbons.

The Idealarc® DC-1500 is a multi-process DC arc welding power source for automatic welding applications. It produces outstanding arc characteristics on both constant voltage and constant current processes for great welding versatility from a single power source. A single range full output control potentiometer provides outstanding welding performance.

Industrial DC Multi-process weldersIdealarc® DC-1000, Idealarc® DC-1500 LI

NCOLN ELECTRIC 3Year warranty

Par ts &Labour


N

rev.: E-SAW05-EN-17-10-16

Analog Power SourceSUBMERGED ARC EQUIPMENT

OUTPUTINPUT


RecommendedWire Feeders• NA-4

Key Options • K10376 Adapter M14/Dinse(F)

LINCOLN ELECTRIC 3



N

Features• Scott® connection taps standard for two AC welding heads operated

in tandem.• Rheostat adjusts the output settings while welding or at idle.• Three output studs with overlapping ranges.• ±10% input line voltage compensation for maintaining weld

consistency.• Thermostat protection from current overload and excessive

temperatures.• Terminal strip for remote control and wire connections and output

studs for welding cables.• Removable side panels for easy access to internal parts.• Windings and rectifiers protected against moisture and corrosive

environments.• Seven-year warranty on power rectifier.

Idealarc® AC-1200Automatic Submerged Arc Welding Power SourceThe AC1200 submerged arc power source is specifically designed for operation with Lincoln Electric’s NA-4 automatic wire feeder. It is a power source that you can count on day-in and day-out to provide proven performance.


Product Item Number Input Power Current Range (A) Rated Output Input Current @

Rated Output Weight(kg)


Idealarc® AC-1200 K3140-2 380/415/440/460V/1Ph 200-1500 1200A/44V/100% 380V: 230A 460V: 182A 742 1580 x 559 x 965

MOVE YOUR SUBMERGED ARC SOLUTION

TO THE NEXT LEVEL DEPOSITION RATES

Single Wire Tiny Twin Arc

Long Stick Out

Tandem

Triple Arc

Tandem Tiny Twin


VIEW BROCHURE

64rev.: E-SAW06-EN-25-09-17



Product Item Number Output Capacity Wire Feed Speed Range(1) (m/min)

Wire Size Range(1) Solid (mm)

Weight (kg)


LT-7 Track Model K395-1 600A/100% 2.5-10.2 2.4-4.8 59 698 X 838 X 356


Features• Feeds 2.4-4.8 mm solid wires, from 2.5-10.2 m/min wire

feed speed.• Calibrated tractor drive adjusts travel speeds from 0.12-

1.8 m/min.• Vertical head lift adjuster for adjusting electrical stick-

out from 12.7-127.0 mm.• Weld angle is up to 50° from vertical on either side; drag angle

is up to 30° from vertical.• Control box can be mounted either left or right, eliminating

the need to return to the power source for routine procedure changes.

• Welds butts, horizontal fillet and lap joints to the left or right side of the tractor frame for convenience.

The LT-7 Tractor is a self-propelled mechanized wire feeder, designed for the submerged arc process with track system capabilities. It is self-guiding and easy to operate – only one operator is usually required.

Submerged Arc DC Wire FeederLT-7 Tractor Processes

• Submerged arc

Unit Includes• Control cable 7.6 m

Key Options • K228-x Control cable • K231-1 Contact Nozzle Assembly for 2.4, 3.2, 4.0 mm Wire • K148A Positive Contact Nozzle Assembly for 2.4-3.2 mm Wire • K148B Positive Contact Nozzle Assembly for 4.0-4.8 mm Wire • K149-5/32 Nozzle Extension for 4.0 mm Wire • KP2721-1 Nozzle Extension, 127 mm • K232 Horizontal Fillet and Lap Adapter Kit • K229 Flat Fillet Adapter Kit • K230 Butt Seam Guide Kit • K396 Track Section, 1.8 m • K285 Concentric Flux Cone Assembly • KP2268-x LT-7 Drive Roll range • KP1890-1 Drive Roll Center 5/64-3/32 Tiny Twin • KP1890-2 Drive Roll Side 5/64-3/32 Tiny Twin • KP1984-1 Guide Tube Assembly 068-3/16 Incoming • KP1985-1 Guide Tube 3/32-3/16 Outgoing • KP1986-1 Guide Tube Outgoing Tiny Twinarc® • KP2127-1 Guide Tube Incoming TinyTwin Tractor

Analog Wire Feeders

INPUT OUTPUT

LINCOLN ELECTRIC 3



N

LINCOLN ELECTRIC 3



N


Recommended Power Sources• NA-3S / NA-5: Flextec 650, Idealarc® DC-1000, Idealarc® DC-1500

• NA-4: Idealarc® AC-1200

Key Options • K221 Start controls PC board • K245 Crater fill control PC board • K2163-60 Power Cable, 18 m (NA-5) • K1842-110 Power Cable, 33 m (NA-5) • K29 Vertical Adjuster, 100 mm • K96 Horizontal Adjuster, 50 mm • K219 Flux Hopper • K278-1 Spreadarc Oscillator • K231-1 Contact Nozzle (2.4, 3.2, 4.0 mm) • K148A Positive Contact Nozzle (2.4-3.2 mm) • K148B Positive Contact Nozzle (4.0-4.8 mm) • KP2721-2 Nozzle Extension, 45° • K285 Concentric Flux Cone • K386 Narrow Gap Nozzle • K149-5/32 Nozzle Extension (4.0 mm) • K129-x Tiny Twinarc® (1.6/2.0/2.4 mm) • K225 Twinarc® Nozzle (2.0-2.4 mm) • K389 Flux Hopper • K223 Solenoid Kit (NA-5) • K162-1 Spindle Kit (NA-5) • K334 Start/Crater Module (NA-5) • K337-10 Weld Timer (NA-5) • K336 Remote Interface (NA-5)


Product Item Number Input Power Wire Feed Speed Range (1)

(m/min)Wire Size Range(1) Solid (mm) Gear Box(1)

NA-3S Controller K210-2

115V AC

0.6-16.5

0.9-5.6

-

NA-4 Controller K388-2 0.6-16.5* -

NA-5 Controller K356-2 0.6-16.5 -

NA-3S/NA-4 HeadK208A 0.4-7.4* 2.4-5.6 142:1

K208B 0.6-10.8* 0.9-2.4 95:1

NA-3SF/NA-4F HeadK209A 0.4-7.4* 2.4-5.6 142:1

K209B 0.6-10.8* 0.9-2.4 95:1

NA-5S HeadK346A 0.4-7.4 2.4-5.6 142:1

K346B 0.6-10.8 1.6-2.4 95:1

NA-5SF HeadK347A 0.4-7.4 2.4-5.6 142:1

K347B 0.6-10.8 1.6-2.4 95:1

INPUT OUTPUT

Features• Solid state controls allow precise control of welding procedures,

striking characteristics, as well as bead size and shape.• Easily adjusted for a wide range of processes, feed speeds and wire sizes.• Compact units with excellent flexibility to fit into simple fixtures or the

most complex automated production lines.• Rugged construction minimizes downtime and maintenance costs.

Improve productivity with the NA-3S, NA-4, or NA-5 automatic wire feeders. These systems have been specially designed to deposit more weld metal at faster travel speeds which eliminates bottlenecks and cuts costs.

Automatic Welding SystemsNA-3, NA-4 & NA-5 Control & Heads

Analog Wire Feeders

DEPOSITION RATES

rev.: E-SAW07-EN-17-10-16


Starting or Crater ModulePermits additional settings of wire feed speed and voltage for an adjustable period of time (10 seconds max). Can be used for either a starting procedure or a crater fill procedure. If both are required, two assemblies must be ordered.

K336Remote Interface ModulePermits remote operation of the NA-5 Inch Up, Inch Down, Start and Stop Functions by either of the following user-supplied external signals and provides electrical isolation of the NA-5 control circuitry.

K363P22-30 lb. Readi-Reel® AdapterAdapts 10-14 kg Lincoln Electric Readi-Reels® of electrode to 51 mm spindle.

K396Track SectionEach section provides 1.8 m of travel.

K1520-1115V/42V Transformer KitProvides a way to use wire feeders requiring 42V input power with power sources that have 115V AC available on the terminal strip.

K1897-1 (DC-1000)

K1900-1 (DC-1500)Paralleling KitPermits paralleling of two power sources.

K1733-5Wire Straightener (Automatics)Includes a three roll wire straightener with adjustable pressure. For up to 5.6 mm diameter wire.

K1811-50/-100Sense Lead Kit Required to accurately monitor voltage at the arc for heavy duty applications. Order: K1811-50 for 15.2 m Order: K1811-100 for 30 m

K3090-1Tube and Clamp KitOne 760 mm aluminium splined tube; two 380 mm aluminium splined tubes; one 760 mm steel tube; 8 clamp assemblies with keys; 2 outrigger assemblies; hardware.

K3089-1Cross Slide AssemblyIncludes: two slides with 100 mm of travel (1 cross slide assembly included with each tractor).

K3070-1Tiny Twin Kit for Cruiser™Includes a second spindle, drive rolls and 95:1 gears.

K3019-1Arc Tracker™Connect the Arc Tracker™ between any DC welding power source and the work clamp to access a wide array of data monitoring information regarding your welding arc, including True Energy™ and Production Monitoring™.

K3154-1Butt Joint Guide KitUsed to track the joint and guide the Tandem Cruiser™ for plate and decking applications.

K29 K334


Vertical Lift AdjusterProvides 102 mm hand crank vertical adjustment of head position. Also includes up to 95.2 mm in-and-out horizontal adjustment with stops that can be preset for simple repetition of the same adjustment.

K96Horizontal Head AdjusterProvides crank adjustment of head position. Has 51 mm horizontal travel.

K219Automatic Flux Hopper AssemblyFor submerged arc welding. Includes electric flux valve.

K230Butt Seam Guide KitMount in place of the standard front wheel to ride in a V-groove or open 3.2-9.5 mm butt joint, keeping the wire in required alignment.

K231-1Submerged Arc Contact Nozzle AssemblyFor 2.0 through 4.8 mm wire electrode at currents generally below 600 amps. Outer flux cone gives full flux coverage with minimum consumption.

K232Horizontal Fillet and Lap Adapter KitIncludes a rear guide wheel, head tension spring and front guide wheel assembly on an adjustable arm which rides in the joint to maintain alignment and electrode angle. Kit includes separate front guide wheel assemblies for fillet and lap joints. Welds to the left or right of the tractor’s center line.

K285Concentric Flux Cone AssemblyFor use with K148B, Positive Contact Nozzle Assembly. Provides concentric flux coverage around the electrode.

K299Wire Reel AssemblyIncludes wire reel for 22.7-27.2 kg coils, wire reel mounting and brake.

Accessories

rev.: E-SAW08-EN-17-10-16



67

STICK WELDERS

ENGINE DRIVEN WELDERSWorld’s Most Respected Products Among Pipe WeldersBuilt Tough for Extreme EnvironmentsStrong Arc Gouging Capability


68


Indu

stria

lCo

mm

erci

alEngine Driven Welders

Mod

e

Pola

rity

DC

Pipe

DC

TIG

AC g

ener

ator

po

wer

rang

e (W

)

Stic

k

Pipe

DC

TIG

tour

ch s

tart

MIG

Flux

-cor

ed

Goug

ing

War

rant

y (y

ears

)

OUTPUT INPUT PROCESS

Ranger® 305D300A DC diesel engine driven welder

Vantage® 410 CE & Vantage® 500 CECompact, multi-process, excellent value

CABLE KITS (GROUND/ELECTRODE)With ground cable & electrode holder (clamp)Item n°:• KIT-300A-50-5M (300A – 50 mm2 – 5 m)• KIT-400A-70-5M (400A – 70 mm2 – 5 m)

Cable kits (ground)Item n°:• GRD-300A-50-5M

(300A – 50 mm2 – 5 m)• GRD-300A-50-10M

(300A – 50 mm2 – 10 m)• GRD-400A-70-10M

(400A – 70 mm2 – 10 m)

REMOTE CONTROLS1 potentiometer, 6-pins, 15 mItem n°: K10095-1-15M

Extension cableItem n°: K10398

UNDERCARRIAGESMedium Two Wheel Trailer. For heavy duty road, off-road, plant and yard use. For Vantage.Item n°:K 2636-1

Four-Wheeled Steerable Yard Trailer.For off-road, plant and yard use. Includes an automatically engaging drawbar lock when the drawbar is raised to the vertical position.For Vantage.Item n°:K 2641-1

Undercarriage for site towing.For Ranger 305DItem n°:K10397-1

SPARK ARRESTOR KITAttaches to muffler exhaust tube. Virtually eliminates spark emissions.Item n°:K10405-1 for Ranger 305DK903-1 for Vantage

ENGINE DRIVEN WELDERS Accessories

Commercial

Ranger® 305D CC/CV DC 20-305 40-300 20-250 8000 ● ● ● ● ● ● 3

Vantage® 410 CECC/CV DC

30-41040-300 20-250

13200 ● ● ● ● ● ● 3

Vantage® 500 CE 30-500 14500 ● ● ● ● ● ● 3

Industrial

rev.: E-ED01-EN-17-10-16


Professional

INPUT OUTPUT


Product Item Number Current Range (A) Rated Output Type of Engine Cylinders Operation

Speeds (rpm)Weight (kg)


Ranger® 305D K2279-320-305 DC40-300 pipe welding20-250 DC TIG

250A/30V/100% Kubota D722 Diesel 3

High idle: 3100Full load: 3000Low idle: 2200

341 909 x 546 x 1327

Processes• Stick• TIG• MIG• Flux-Cored• Gouging

Key Options • KIT-300A-50-5M Cable Kit 300A – 50 mm² – 5 m

• GRD-300A-50-xM Ground cable 300A – 50 mm² – 5/10/15 m

• K10376 Adapter M14/Dinse(F) • K10095-1-15M Remote control – 15 m • K10405-1-INST Chalwyn valve • K1847-1 Spark arrestor • K14152-1 Lincoln Analog-Digital Interface

Features• Excellent DC multi-process welding for general purpose stick, downhill pipe (stick), TIG,

cored-wire, MIG (100% CO₂ and mixed gas) and arc gouging with up to 4.8 mm carbons.• Fully enclosed stainless steel case for equipment protection and low noise.• Lincoln’s® Chopper Technology® provides easy starts, a smooth arc, low spatter and excellent

bead appearance.• A portable powerhouse-delivers 8,500 peak (8,000 continuous) watts of 115/230/400V 50Hz AC

generator power). Enough power to run lights, tools, or pumps and weld all at the same time!• Arc force control provides a soft or more forceful digging arc.• Built-in “hot” start for easier starts and restrikes.• Touch-Start DC TIG®—Lift tungsten to start the arc.• Digital meters for amps and volts output make it easy to precisely set your procedures.

Fuel gauge, engine protection light for oil pressure and engine temperature on top for monitoring engine performance.

• Lift TIG DC capability (SA).

The Ranger® 305 D CE is a powerful 300 amps DC multi-process diesel engine driven welder. It provides excellent arc characteristics in Stick (Conventional or Pipe), TIG, MIG or Arc Gouging. The Ranger is totally enclosed to protect the 45 litre fuel tank, water-cooled Kubota 18.8 HP D722 diesel engine. Delivering 8000 Continuous (8500 peak) watts of 115/230/400V AC generator power it is obvious this was designed for welding professionals with high demands.

300A DC diesel engine driven welderRanger® 305D

CommercialENGINE DRIVEN WELDERS

LINCOLN ELECTRIC 3



N

rev.: E-ED02-EN-25-09-17


INPUT OUTPUT

Features• Compact case with stainless steel enclosure.• Arc gouging up to 8mm (V410) and 10mm (V500).• Downhill pipe welding mode. Excellent for cellulosic electrodes.• Built-in “Hot Start” for easier starts and restrikes.• Plenty of AC 50 Hz generator power: 3-phase 400V / 1 phase 220V / 1 phase 115V.• Reliable Four-Cylinder Engine, water cooled.• Innovative Service Access.• Stainless steel enclosure delivers added protection and durability.• Low noise to fit with European norms.

The Vantage® 410 CE and 500 CE are one of the most compact and powerful engine-driven welders / generators in the construction, pipe or rental fleet market today. They are also the most quiet with a smooth running 4-cylinder water-cooled diesel engines. Use these multi-process welders for Stick welding with a large variety of electrodes, lift TIG welding, CV welding with shielding gas or Innershield wires and arc gouge up to 8 mm carbons for Vantage 410 and 10 mm carbons for Vantage 500. You will value the superior arc performance delivered by exclusive Lincoln Chopper Technology. You will also appreciate VRD™ (Voltage Reduction Device™) which reduces OCV (open circuit voltage) in the CC-Stick weld mode for added safety.

Compact, multi-process, excellent value

Vantage® 410 CEVantage® 500 CE


Product Item Number Current Range (A) Rated Output Type of Engine Cylinders Operation

Speeds (rpm)Weight (kg)


Vantage® 410 CE K4178-1 30-410 350A/32V/100%410A/23V/100%

Kubota V1505EPA Tier 4 Final

4 Full load: 1800Low idle: 1350

488

913 x 642 x 1524

Vantage® 500 CE K2503-3 30-500 400A/36V/100%450A/38V/60%

Perkins 404D-22TURBO Diesel 586

Processes• Stick• TIG• MIG• Flux-Cored• Gouging

Key Options • KIT-400A-70-5M Cable Kit 400A – 70 mm² – 5 m • GRD-400A-70-xM Ground cable 400A – 70 mm² – 5/10/15 m • E/H-400A-70-xM Electrode holder 400A – 70 mm² – 5/10 m • K10376 Adapter M14/Dinse(F) • K10095-1-15M Remote control – 15 m • K903-1 Spark Arrestor Kit • K2636-1 Medium Two-Wheel Trailer & Duo-Hitch® Ball/Eye Hitch • K2641-2 Four-Wheel Yard Trailer with Duo-Hitch® Ball/Eye Hitch

IndustrialENGINE DRIVEN WELDERS

LINCOLN ELECTRIC 3



N

12,5kW

13/15kW

410CE 500CE

rev.: E-ED03-EN-17-10-16

71

PLASMA CUTTING SYSTEMS Portable Cutting PowerHigh Travel SpeedsGreat for Hobby, Farm, Autobody or Industral Use


KEY: ● Excellent ● Good ▲Possible

Inve

rter

3Ph

Inve

rter

1Ph

PL ASMA CUTTERS Accessories

Plasma Cutters

Invertec® PC-210Portable cutting power up to 10 mm

Tomahawk® 1025, Tomahawk® 1538High Performance Plasma Cutting

Mod

e

Pola

rity

Out

put

Rang

e (A

mps

)

Cutt

ing

thic

knes

s (m

m)

Cut

Arc

Goug

e

Pier

ce

War

rant

y (y

ears

)

OUTPUT PROCESS

CUTTING CIRCLESItem n°:W0300699A

UNDERCARRIAGES2-wheeled cart, delivered as a kit, for use with PC210Item n°:W0200002

4-wheeled undercarriage with gas cylinder platform delivered as a kit, for use with Tomahawk®.Item n°:K 2694-1

AIR FILTER LAF1250Sub-micron filter for compressed air.It is designed to remove moisture, oils and sprays particles from air compressors, thus providing clean, free of oil and dry air.Item n°:W88X1456AW8800117R (filter cartridge)

Hand torches PC210 • PTH-C25A-CSL-3MR LC25, 3 m

Hand torches TH1025• PTH-061A-CX-7M5A LC65, 7.5 m• PTH-061A-CX-7M15A LC65, 15 m

Automatic torches TH1025• PTM-061A-CX-7M5A LC65M, 7.5 m• PTM-061A-CX-7M15A LC65M, 15 m

Hand torches TH1535• PTH-101A-CX-7M5A LC105, 7.5 m• PTH-101A-CX-7M15A LC105, 15 m

Automatic torches TH1535• PTM-101A-CX-7M5A LC105M, 7.5 m• PTM-101A-CX-7M15A LC105M, 15 m

TORCHES

Inverter 1Ph

Invertec® PC-210 CC DC 10-25 10 ● ● ● 2

Tomahawk® 1025CC DC

25-60 25 ● ● ● 3

Tomahawk® 1538 20-100 40 ● ● ● 3

Inverter 3Ph

rev.: E-PC01-EN-17-10-16


PL ASMA CUTTERS Inverter 1Ph

INPUT OUTPUT

Features• Flexible: only 230 V input required.• High performance: innovative advanced electrode and nozzle design.• Robust: long life compressor.• Portable: only 18.5 kg, small and compact.• Different materials: mild steel, stainless steel, aluminium and many more.• Concentrated plasma stream: less heat input, less distortion.

Invertec® PC-210Portable cutting power up to 10 mm

The Plasma PC-210 is the most flexible plasma cutting machine you could envisage. The unit arrives ready to go, able to cut fast and precisely. Powered from a standard 230V input supply, the machine is ideal for work on site. With the PC-210 cutting need no longer be a problem, forget the grinder, simply take the torch and cut in seconds. This inverter based machine is equipped with an integrated air compressor. This provides maximum flexibility without the need for a separate compressed air supply. And, with a weight of only 18.5 kg combined with its small size, this versatile machine can be used anywhere, anytime.

• Using internal compressor: recommended up to 10 mm mild steel.

• Can also be used with an external-compressor: recommended up to 10 mm mild steel

Processes• Air plasma cutting• Gouging

Unit Includes• 2 m-input cable• 3 m-hand cutting torch• Ground clamp and cable• Air connection kit• Cutting torch consumables kit

Key Options • W88X1456A Air Filter LAF1250 • W8800117R Filter Cartridge • PTH-C25A-SL-3MR Plasma torch • W0300699A Cutting circle • W0200002 Undercarriage

Applications• On site maintenance• Service tasks• Small construction sites• General installations• Air ducting installation (HVAC)• Demolition work• Rental


Product Item NumberPrimary Voltage (50-60Hz)

Rated Output Cutting Capacity (mm) Flow Rate Inlet

PressureOutput Range (A)

Weight (kg)


Invertec® PC210 K12038-1 230V/1Ph

25A/90V/35%20A/88V/60%15A/86V/100%

1080l/min+/-20%@5.0bar

6.0bar 10-25 18.5 385 x 215 x 480

10 mmmaximum6 mm

recommended

12 mmseverance

LINCOLN ELECTRIC 2



N

rev.: E-PC02-EN-17-10-16


OUTPUTINPUT

Processes• Plasma air cutting• Gouging

Unit Includes• 2 m-input cable• 3 m-hand cutting torch• Ground clamp and cable• Air connection kit• Cutting torch consumables kit

Key Options • K12049-1 Remote control (TH1538) • W05X1086A Remote Control Kit • W0300699A Cutting circle • K2694-1 Undercarriage (TH 1025) • W88X1456A Air Filter LAF1250 • W8800117R Filter Cartridge

LINCOLN ELECTRIC 3



N

Features• Starting: innovative advanced arc starting without HF.• Performance: innovative advanced electrode and nozzle design.• Longer lifetime: innovative advanced design increases lifetime of consumables.• Faster: higher travel speeds and plate thickness.• Flexible: multiple torch configurations.• Different materials: mild steel, mtainless mteel, aluminium and many more.• Concentrated plasma stream: less heat input, less distortion.

The Tomahawk® 1025 and 1538 Plasma cutting machines are built to handle harsh environmental conditions using Lincoln tunnel technology to separate the PCB’s and sensitive parts from the contaminating cooling airflow. The improved mains voltage tolerances and robust metal case with large protective rubber corners also make these machines suitable for operation on site with a generator or within a workshop environment.

The Lincoln Tomahawk® concept for Plasma cutting focuses on three elements:

S – An innovative and patented striking system preserves the electrode tip and extends its lifetime.

P – Circular enhancements with improved radial airflow and innovative electrode/nozzle design concentrate the plasma stream.

L – The internally cooled electrode and torch head and electrode/nozzle design considerably increase their lifetime.

Tomahawk® 1025Tomahawk® 1538High Performance Plasma Cutting


Product Item Number Primary Voltage (50-60Hz) Rated Output Cutting

Capacity (mm) Flow Rate Inlet Pressure

Output Range (A)

Weight (kg)


Tomahawk® 1025 K12048-1

400V/3Ph

60A/40%40A/100% 25 130l/min±20%

@5.0bar 6.0 bar 20-60 22 389 x 247 x 489

Tomahawk® 1538 K12039-1 100A/40%60A/100% 40 280l/min±20%

@5.0bar 7.0 bar 20-100 36 455 x 301 x 618

PL ASMA CUTTERS

TH 1025Recommended up to 25 mm mild steel (severance 30 mm)

TH 1538Recommended up to 40 mm mild steel (severance 45 mm)

LC105 torch design with drag cup

Inverter 3Ph

40 mmrecommended

45 mmseverance

25 mmrecommended

30 mmseverance

rev.: E-PC03-EN-18-04-17


PL ASMA CUTTERS

TRAINING EQUIPMENT Revolution in Welding Education


TR AINING EQUIPMENT

Manufacturing’s workforce challenge

Anyone who interfaces with the manufacturing sector knows this cold, hard fact: we need more people, we need more investment in training and we need them now.

Consider this – more than 600,000 skilled positions are unfilled in the United States.

The manufacturing sector needs to improve its image in order to draw future workers to these skilled trades.

THE QUESTION: HOW?THE ANSWER: VIRTUAL REALITY WELDING

More than 80 percent of U.S. employers report they have a moderate to severe shortage of skilled workers.

In a world where skilled labor shortages are rising, the investment and need to not only train but also attract and engage new skilled workers is at an all-time high.

Today’s youth — the future workforce — relies on the virtual world.This means the tactics to engage and interest them in learning the skills needed for future careers need to change.

Virtual reality welding is ideal as:• An interactive, engaging teaching tool.• An HR screening tool for testing applicants’ welding skills.• A tool for refreshing the welding skillset and knowledge of an existing

workforce.

76rev.: E-VRTEX01-EN-17-10-16

77

TR AINING EQUIPMENT

The systems offer hands-on training that’s consistent with standard industry methodology and evaluation criteria in a fun “gaming” inspired environment, thanks to a speciallyequipped virtual reality welding helmet.

VRTEX® welding training simulators:• Attract and engage students.• Measure and record real-time results.• Enhance welding training programs.• Reduce energy consumption, waste and scrap.• Provide tangible savings.

LINCOLN ELECTRIC GOES VIRTUALIntroducing Lincoln Electric’s VRTEX® Simulated Welding Training Solutions

VRTEX® 360 / VRTEX® Mobile / VRTEX® Engage™

www.lincolnelectriceurope.com rev.: E-VRTEX02-EN-17-10-16

VRTEX® Mobile


TR AINING EQUIPMENT

All the VRTEX® 360, VRTEX® Mobile and VRTEX® Engage™ systems have rich, vivid graphics and feature real-world welding and fume removal equipment.

VRTEX® 360

VRTEX® Engage™

rev.: E-VRTEX03-EN-17-10-16


TR AINING EQUIPMENT

VRTEX’s virtual environments are realistic…and fun.

Students have access to the THEORY functionality which provides on-screen welding terminology and definitions to enhance additional comprehension.

ENGAGING. EXCITING. ENHANCING.

In today’s digital society, virtual training systems allow students of any age to try welding in a safe, virtual environment with realistic imagery and scenes, from a military base to a motorsports garage.VRTEX® simulators can be used at:

• College fairs and recruitment events• Open houses• Trade shows• Seminars


TR AINING EQUIPMENT


INCREASED COMPREHENSION THROUGH INTERACTION

People will line up to try their hand at

virtual welding and learn about what it takes to build a career as

a skilled trades worker.

The VRTEX® system even replicates proper machine set-up. Before they can “weld”, students must enter the proper

material type, process, gas flow and amperage / voltage / wire-feed speed

into the system.

Connect a projector or large LCD display to the VRTEX® unit so an entire classroom can see what the welder sees under the helmet.This brings a sense of teamwork to the learning process and increases comprehension through interaction.Multiple views show accurate, real-time measurement of such key variables as contact tip to work distance, work angle, travel angle, travel speed and position.

Virtual reality welding training doesn't replace hands-on welding — it enhances it.


TR AINING EQUIPMENT

81

Challenging out-of-position welding training becomes simple with VRTEX®. Students understand what they will see and what it will feel like before they ever pick up a real welding gun.

www.lincolnelectriceurope.com rev.: E-VRTEX06-EN-17-10-16

EFFECTIVE RESULTS EXPLAINEDTO THE REAL WORLD

From a realistic welding puddle to accurate sounds and movements, what students learn virtually with VRTEX® seamlessly transfers into real-world, hands-on welding training.

Students move from a VRTEX® machine and into a real welding training booth feeling confident about set-up and welding procedures.

Using VRTEX® as the first-line training method helps reduce waste and scrap, to create a cleaner training environment.

Students can practice repetitive welding without the time needed to tack plate and toss scrap.There’s no real coupon – only one that appears virtually – and quickly -with the press of a button.

Efficient Virtual Learning = Reduced Costs, Improved Safety

TR AINING EQUIPMENT

8282www.lincolnelectriceurope.comrev.: E-VRTEX07-EN-17-10-16

TR AINING EQUIPMENT


Processes• SMAW, GMAW, FCAW-GS, FCAW-SS

Joint Configurations• Flat Plate• Tee Joint• Lap Joint (only with upgrade 5)• 6” diameter schedule 40 Pipe• 2” diameter XXS Pipe

Positions1G/PA, 2F/PB, 2G/PC, 3F/PF-PG, 3G/PF-PG, 4F/PD, 4G/PE

UsabilityFlexible, multi-position stand

FunctionalityGMAW gun and retractable SMAW stinger (45° / 90° angle adjustment)

Key Options • AD2435-2 VRTEX® 360 Upgrade 2 • AD2435-3 VRTEX® 360 Upgrade 3 • AD2435-4 VRTEX® 360 Upgrade 4 • AD2435-5 VRTEX® 360 Upgrade 5 • AD2435-6 VRTEX® 360 Upgrade 6 • K3205-1 VRTEX® 360 curriculum contains spiral bound guide and DVD video series • K4057-1 & K4058-1 Project Based Lessons for the VRTEX® Welding Training Systems containing 15 lessons that can be implemented with a welding curriculum • K4057-2 Project Based Lessons instructor guide

Features• Full featured, advanced and scalable welding simulator.• Rich, vivid graphics and feature real-world welding and fume removal equipment.• Students have access to the THEORY functionality which provides on-screen

welding terminology and definitions to enhance additional comprehension.• Virtual reality welding training doesn't replace hands-on welding — it enhances it.• The VRTEX® system even replicates proper machine set-up. Before they can “weld”,

students must enter the proper material type, process, gas flow and amperage / voltage / wire-feed speed into the system.

• Connect a projector or large LCD display to the VRTEX® unit so an entire classroom can see what the welder sees under the helmet.

• Multiple views show accurate, real-time measurement of such key variables as contact tip to work distance, work angle, travel angle, travel speed and position.

Additional Features• Advanced Scoring Module (ASME/D1.1)• AWS Bend Test• GMAW Aluminium• GMAW Stainless

VRTEX® 360In today’s digital society, virtual training systems allow students of any age to try welding in a safe, virtual environment with realistic imagery and scenes, from a military base to a motorsports garage.VRTEX® simulators can be used at:• college fairs and recruitment events,• open houses,• trade shows,• seminars.The systems offer hands-on training that’s consistent with standard industry methodology and evaluation criteria in a fun “gaming” inspired environment, thanks to a specially equipped virtual reality welding helmet. VRTEX® welding training simulators:• attract and engage students,• measure and record real-time results,• enhance welding training programs,• reduce energy consumption, waste and scrap,• provide tangible savings.

Engaging. Exciting. Enhancing


Product Item Number Input Power Input Current Positions Dimensions HxWxD (mm) Weight (kg)

VRTEX® 360 Std. AD2433-1

115/230/1/50/60 4A @ 115, 2A @ 230 1G/PA, 2F/PB, 2G/PC, 3F/PF-PG, 3G/PF-PG, 4F/PD, 4G/PE

Machine: 1803 x 762 x 1270Stand: 1981 x 990 x 1194

Machine: 163Stand: 46

VRTEX® 360 Alt. AD2433-2

VRTEX® 360 Std. ONE-PAK®* AD2434-1

VRTEX® 360 Alt. ONE-PAK®* AD2434-2

* ONE-PAK models include VRTEX 360 system + Upgrade 2, 3, 4 & 5 + K3205-1 + K4057-1 + K4057-2 + K4058-1 + K3206-1




Product Item Number Input Power Input Current Positions Dimensions HxWxD (mm) Weight (kg)

VRTEX® Mobile Standard frequency AD2436-1

115/230/1/50/60 4A @ 115, 2A @ 230 1G, 2F, 2G, 3F, 3G

Machine: 826 x 496 x 978 Machine: 57 kg;Monitor: 9 kg;Crate: 70 kg;Armrest: 3.1 kg

VRTEX® Mobile Alternate frequency AD2436-2 Monitor: 366 x 392 x 204

Processes• GMAW standard• FCAW-GS standard• FCAW-SS standard• SMAW optional

Joint Configurations• Flat Plate• Tee Joint• Groove Joint

Positions1G/PA, 2F/PB, 2G/PC, 3F/PF-PG, 3G/PF-PG

UsabilityTabletop stand with optional arm rest

FunctionalityUnigun – standard unit includes GMAW attachment. Optional virtual / fixed 90° angle SMAW attachment

Number• AD2436-1 VRTEX® Mobile

– Standard frequency• AD2436-2 VRTEX® Mobile

– Alternate frequency

Units Include • K3165-3 SMAW kit • K3268-1 Arm Rest

Features• Easily transported from classroom to classroom or to a recruitment event or open house.

The VRTEX® Mobile can be ready to go in a matter of minutes.• Touchscreen user interaction provides equipment and procedural set-up on an intuitive,

resistive touchscreen. All screens mirror the VRTEX® 360, making transfer of interaction seamless between the systems.

• Universal gun handle allows to connect of a MIG/MAG gun attachment for GMAW and FCAW welding and an optional accessory for SMAW.

• Tabletop coupon stand easily attaches and stands on a standard table for welding and is taken apart for quick and simple storage inside the VRTEX® Mobile.

• Consumable and environmental savings – No welding consumables, wire or waste – Track savings with the Weldometer™.

Additional Features• No software upgrade package

VRTEX® MobileThe VRTEX® Mobile is a basic, entry level welding training system. It is designed to provide mobility in an easy to use and engaging welding training tool. The VRTEX® Mobile is ideal for initial, basic welding training, as a recruitment and engagement tool for educational and industry and for employment and screening for human resources or as an evaluation tool for instructors and educators to get a baseline on student knowledge.

Engaging. Exciting. Enhancing

TR AINING EQUIPMENT



TR AINING EQUIPMENT

Features• Learn Anywhere – sets up anywhere to introduce skilled trades to students who are

ready to explore a possible career in welding or consider degree programs in engineering and related fields.

• Capable Education Tool – provides instant feedback and assessments on safety and correct welding procedure settings.

• One Small Step – provides an introductory environment that incorporates STEM features, exposure to welding safety, procedures and techniques.

• No Fees. No Waste – helps your program reduce overall operating costs, as there is NO waste – no use of steel, electrodes, wire, shielding gas. And, with VRTEX Engage, there is no licensing requirement and no annual fees.

VRTEX® Engage™For some, the first step into the virtual learning environment can be a big one. Lincoln Electric makes that first step easier with VRTEX® Engage™. This standalone foundational system is designed to introduce students to the skilled trades – specifically arc welding. VRTEX Engage includes a touch screen monitor, welding gun, tracking device and a work surface. It’s all contained in a lightweight and portable carrying case that can be deployed in any setting – industrial, educational or elsewhere.VRTEX Engage is a cost-effective tool designed to help educators train welders more efficiently and engage students to explore a career in welding. The system addresses introductory welding lessons, including safety, machine and process selection, welding procedure set up, welding theory and more. The road to educating a skilled welding workforce starts with one small step. Make that small step a giant leap with VRTEX Engage.

Welding starts here


Product Item Number Input Power Input Current Operating System Processor / Memory Hard Drive DimensionsHxWxD (mm) Weight(kg)

VRTEX® Engage™

K4299-1

115/230/1/50/60 1A @ 115, 0.5A @ 230 MS Windows ® 7 Professional 32-bi

Intel ® Core® i5 Quad / 4GB 128 GB Solid State Drive 622 x 492 x 310 22.6

K4299-2

K4299-3

K4299-4

Processes• GMAW• FCAW-GS• FCAW-SS• SMAW

Components and Specifications• MS Windows® 7 Professional 32-bit• Intel® Core® i5 Quad Core processor• 4GB DDR memory• 128 GB Solid State Drive• 2GB high-powered graphics card

Monitor17” LCD monitor – resistive touch screen

SpeakersUSB 2.0 powered speakers

VRTEX Welding Transfer ModesSimulates short arc, spray and pulse

Language SupportEnglish, French, German, Spanish, Turkish, Japanese, Chinese (Mandarin), Portuguese (Brazilian), Russian, Korean, Hindi and Arabic.

Item Number • K4299-1 Standard Frequency • K4299-2 Alternate Frequency 1 • K4299-3 Alternate Frequency 2 • K4299-4 Alternate Frequency 3




STICK WELDERS

WELD FUME CONTROL Reduces Welding Fume and Dust in The WorkplacePortable, Wall-Mounted or Shop-Wide Systems


WELD FUME CONTROL

Lincoln Electric offers a complete line of portable, stationary and engineered solutions for welding fume control – mobile, stationary, downdraft and engineered systems.

Mobile

Stationary Downdraft

Mobile welding fume extractors with filtration are lightweight and rugged and are designed for light to medium duty welding fume extraction. The portable, lightweight solution is for the removal and filtration of welding fumes. This solution is ideal for facilities that require welding fume extraction in multiple locations.

Wall mounted, low vacuum systems are designed for extraction and filtration of welding fume. When used in conjunction with the LFA series of arms they provide welders with optimal motion and reach for their specific welding position(s) and work area. Ideal for a variety of facilities including maintenance departments, general fabrication and welding job shops, weld schools and industrial welding environments.

Lincoln Electric’s DownFlex® table are dual purpose work bench and extraction units, designed specifically for the removal of welding fume at the source. It can also be used to remove particulate and dust from metal grinding applications and light duty plasma arc cutting.

rev.: E-WFE01-EN-17-10-16


Portable Welding Fume ExtractorsMiniflex®

Lightweight, rugged design, low vacuum/high volume filtration system designed for extraction and filtration of welding fume. Ideal for facilities that require welding fume extraction in multiple locations, including maintenance departments, general fabrication and job shops and industrial welding environments. Perfect choice for small shops or companies with few welding stations, yet lightweight and small enough to be easily carried to the welding area.

Mobile / Portable Units

Portable Units

WELD FUME CONTROL

The Miniflex® is ideally used for:• Contractors• Maintenance Workers• Small To Medium Fabrication Shops• Home Hobbyists

Miniflex® is a high vacuum system designed for the removal and filtration of welding fumes from light duty welding applications. The Miniflex® excels in performance and ease of handling. It can be completely disassembled in a matter of minutes for cleaning and maintenance. The convenient automatic start/stop function can extend the life of the motor brushes and reduces energy consumption, supplied as standard with:

• LongLife-H filter, filter surface 12 m²• HEPA filter• Aluminium prefilter• Automatic start / stop• Set of wheels• Extraction hose 2.5 m• 2 sets carbon brushes• Capacity: 2 x 1000W

rev.: E-WFE02-EN-17-10-16


Portable Welding Fume ExtractorsMobiflex®

Mobile Units

WELD FUME CONTROL

The Mobiflex® is ideally used for:• Small Manufacturing Facilities• Schools / Training• Fabrication• Plant Maintenance & repair

The Mobiflex® 200-M, 300-E and 400-MS are low vacuum systems for welding fume extraction and filtration. Their size and mobility make them ideal for smaller manufacturing facilities that require light to medium duty welding fume extractionin variable locations.

Mobiflex® 300-EMobile unit with 14.2 m² electrostatic filter (consisting of an ionizing cell and industrial collector) and metallic preimposed filter, supplied with 5 m mains cable.


• Power Consumption – 0.75 kW

• Capacity – Max. Approx. 1300 m³/h at the hood

• Arm – Ø 203 mm with rotatable hood and throttle valve

Hose – Ø 203 mm

• Filter efficiency – up to 99%

Applications

• Oil Treated Metals

Mobiflex® 400-MSMobile unit with 30 m² mechanical self-cleaning RotaPulse filter with ExtraCoat treatment. Automatic filter cleaning by compressed air shot. Supplied with 5 m mains cable.

Mobiflex® 200-MMobile unit with 50 m² LongLife filter with filter pollution indicator, supplied with 5 m mains cable.


• Power Consumption – 0.75 kW

• Capacity – Max. Approx. 1250 m³/h at the hood


Mobiflex® 100-NF Portable fanPortable extraction fan with a free-blowing capacity of 2400 m³/h. Including 6 m mains cable and motor protection switch.


• Power Consumption – 0.75kW

• Capacity – Max. Approx. 1300 m³/h at the nozzle (with 5 m hose)

• Free-blowing Capacity – Max. 2400 m³/h

• Maximum Length of Configuration – up to 20 m

• Hose Diameter – Ø 160 mm

ApplicationsAll welding processes in enclosed areas such as pipes, containers, tank trucks and ship hulls.


• Power Consumption – 0.75kW

• Capacity – Max. Approx. 1250m3/h at the hood


Hose – Ø 203 mm


Applications

• MIG/MAG solid wire > 700 kg/year

• MIG/MAG flux cored wire > 500 kg/year

• Rutile Electrodes > 500 kg/year

• Basic Electrodes > 500 kg/year

• Not suitable for oil treated metals.

• Dry, oil-free compressed air 4-5 bar connection required

Hose – Ø 203 mm


Applications

• MIG/MAG solid wire < 700 kg/year

• MIG/MAG flux cored wire < 500 kg/year

• Rutile Electrodes < 500 kg/year

• Basic Electrodes < 500 kg/year

• Not suitable for oil treated metalsPortable Welding Fume Extractors

rev.: E-WFE03-EN-17-10-16


The Statiflex® base units are stationary, wall-mounted low vacuum systems designed for light to medium duty extraction and filtration of welding fume.

Stationary UnitsWELD FUME CONTROL

The Statiflex® is ideally used for:• General fabrication• Job shops• Welding schools• Maintenance departments

Wall mounted, low vacuum systems are designed for extraction and filtration of welding fume. When used in conjunction with the LFA series of arms they provide welders with optimal motion and reach for their specific welding position(s) and work area. Ideal for a variety of facilities including maintenance departments, general fabrication and welding job shops, weld schools and industrial welding environments.

Statiflex®Wall-Mounted Welding Fume Extractors

Statiflex® 400-MSThe Statiflex 400-MS stationary, wall-mounted low vacuum system is intended for light to medium duty extraction and filtration of welding fume. The Statiflex is designed for facilities with fixed work stations and little available floor space. A self-cleaning filter is standard on the Statiflex 400-MS

Applications

• MIG/MAG solid wire > 700 kg/year

• MIG/MAG flux cored wire > 500 kg/year

• Rutile Electrodes > 500 kg/year

• Basic Electrodes > 500 kg/year

• Not suitable for oil treated metals.

• Dry, oil-free compressed air 4-5 bar connection required.

Statiflex 400-MS is to be connected to a CB control box.

Statiflex® 200-MStationary welding fume filter with disposable LongLife filter cartridge.

Filter surface area 50 m² with ExtraCoat treatment.Including filter pollution indicator.No voltage required.

Applications

• MIG/MAG solid wire < 700 kg/year

• MIG/MAG flux cored wire < 500 kg/year

• Rutile Electrodes < 500 kg/year

• Basic Electrodes < 500 kg/year

• Not suitable for oil treated metals

Statiflex® 300-EIndustrial air cleaner with electrostatic filter. To be installed in ductwork or to be connected to extraction arm(s) with fan. Including oil collector. Possibility to install an oil drainer. Filters included: FIS and FCS; pre and final filters to be ordered separately. No fan included. Max. filter capacity: 2500 m³/h. Filter surface area: 14.2 m².

Applications

• Oil Treated Metals

rev.: E-WFE04-EN-17-10-16


The DownFlex® table is a compact table that can be placed in multiple locations around a welding shop. They combine a workbench and extraction unit designed specifically for the removal of welding fume. The DownFlex® tables can be used to remove particulate and dust from metal grinding applications, as well as fume and particulate from light duty plasma arc cutting.

Downdraft TablesWELD FUME CONTROL

The DownFlex® downdraft table is ideally used for:• Welding• Plasma Cutting• Grinding (1)

Lincoln Electric’s DownFlex® table are dual purpose work bench and extraction units, designed specifically for the removal of welding fume at the source. It can also be used to remove particulate and dust from metal grinding applications and light duty plasma arc cutting.

DownFlex®Dual Purpose Workbench & Extraction Tables

(1) Not suitable for grinding Aluminium, Magnesium, or other explosive materials

DownFlex® 100-NF• Workbench, to be connected to an external extraction/filter

system.

• Including backdraft kit and side panels. Extraction facility to be connected to air outlet on top of the backdraft panel.

• Contains no filters, but can be equipped with optional spark arresters to be mounted in the backdraft panel.

• Prepared for two optional dust containers

DownFlex® 400-MS/A• Workbench with integrated extraction fan,

3-stage spark arrester and self-cleaning filter cartridges. The filter cartridges are cleaned automatically from the inside by compressed airshots.

• An integrated buzzer indicates when the filter cartridges need to be replaced.

DownFlex® 400-MS• Workbench with integrated extraction fan,

3-stage spark arrester and self-cleaning filter cartridges.

• The Magnehelic (pressure) gauge on the control panel indicates when the automatic filter cleaning systems needs to be switched on.

• The filter cartridges are cleaned from the inside by compressed airshots.

• For welding and grinding applications the down-draft table should be fitted with a backdraft kit for optimum division of the extraction capacity.

• Suitable for medium to heavy duty applications.

DownFlex® 200-M• Workbench with integrated extraction fan,

3-stage spark arrester and disposable filter cartridges.

• A Magnehelic gauge on the control panel indicates when the filter cartridges require replacement.

• For welding and grinding applications the downdraft table should be fitted with a backdraft kit for optimum division of the extraction capacity.

• Suitable for light to medium duty applications.

• For welding and grinding applications the downdraft table should be fitted with a backdraft kit for optimum division of the extraction capacity.

• Suitable for heavy duty applications.

rev.: E-WFE05-EN-17-10-16


WELD FUME CONTROL

The Modular Extraction Hood is an easy to install, customizable enclosure that helps provide a cleaner work environment for a variety of industrial processes. Designed and built to Lincoln's rugged and dependable standards, these units are ideal for robotic and hard automation applications.

The Modular Extraction Hood is a reliable and practical solution to contain and extract welding, cutting, arc gouging and grinding fume from the work environment.

Modular Extraction HoodAn Innovative and Flexible Solution to Efficient Weld Fume Control

COMBINING INNOVATION AND SIMPLICITY, THE LINCOLN ELECTRICMODULAR EXTRACTION HOOD PROVIDES A FLEXIBLE ANDEFFICIENT OPTION FOR WELD FUME EXTRACTION IN A WORKZONE WITH AUTOMATED EQUIPMENT.

PROCESSESThe Modular Extraction Hood is appropriate for use with the following industrial welding and cutting processes: Stick, TIG, MIG, Flux-Cored, Plasma Cutting, Arc Gouging, Grinding(1).

For applications in which a worker is inside the work zone, exhaust at the arc or a respirator may be necessary.

rev.: E-WFE06-EN-17-10-16


WELD FUME CONTROL

Free standing general filtration systemThe Diluter™ System

The Diluter™ is a free-standing general filtration system that reduces the overall concentration of welding fume through continuous filtration and airflow.The product has been designed exclusively for extracting and filtering welding fume which is released during the most common welding fabrication processes. The system supplements the natural ventilation (draft) and/or forced ventilation (roof / wall fans) which may be present to reduce the overall concentration of welding fume in the workshop.

THE FOUR MAIN COMPONENTS:

1. Diluter™ Unit: Lincoln Electric’s unique Diluter™ air dispersement head re-circulates the cleaned air into the workspace by means of precisely controlled outlet nozzles.

2. Filter Unit: A stationary filter unit incorporating automatic pneumatic filter cleaning. Air is captured and cleaned in a 3-stage 150 m² filter system with an efficiency of 99.9%. The filter unit has an external compressed air connection and particulate is collected in a waste container that can be emptied easily.

3. Fan: Lincoln Electric utilizes a high-efficiency 10 Hp IE3 motor in combination with 50 Hz fan technology offering the same airflow as a traditional 60 Hz fan, but with less noise, less energy consumption and less required Hp.

4. Green-Drive™ Control System: Lincoln Electric’s Green-Drive Systems are on the cutting edge of fume technology control. Integrated controls continuously monitor system operation with a state-of-the-art pressure sensor and increase or decrease airflow to maintain the required performance levels. This results in energy savings of up to 50% and increased filter life of up to 30% over traditional on/off systems.

THE DILUTER TECHNICAL DATA

• Airflow: 6000 cfm• Input Power: 380-480/3/50-60 Hz• Maximum Fan Power Consumption: 10 HP (7.5 kW)• Dimensions: H x W x D: 5245 x 1200 x 2438 mm• Weight: 800 kg• Maximum Noise Level: 68 dB(A) according to ISO 3746• Throw of the air flow is adjustable from 15-50 m• Operating Temperatures: Minimum: 5°C, Maximum: 45°C• Drum Capacity: 100 liters• Certification: System Controls-UL 508A, Fan Motor-UR, Frequency Inverter-UL

Benefits• Cleaner work environment –

Reduce dust and dirt in operator and surrounding work areas.

• Low cost installation – No ductwork required.

• Custom engineered to meet facility and application requirements.

• Easy installation – Position the unit on the floor, a platform or a mezzanine.

• Low noise level – Will not contribute to increased noise levels.

rev.: E-WFE07-EN-17-10-16


WELD FUME CONTROL

Push-Pull System

Extraction at source is impossible when welding large pieces of metalwork or when the welder needs to change his welding location frequently. In such cases, aerial extraction is the only way to tackle the layer of welding fumes. Lincoln developed the extremely effective push/pull-system especially for this purpose.

Lincoln’s push/pull-system consists of 4 components:

1. Extraction (Pull): To move and extract the layer of particulate in a controlled direction, an extraction duct is designed according to your specific operation and facility layout. The extraction duct is provided with airflow grids.

2. Filtration: The extraction duct is connected to a self-cleaning filtration unit. As the particulate moves through the extraction duct, it is collected on the filter media which is periodically cleaned by an automated, pneumatic cleaning system.

3. Fan: The continuous extraction (pulling), filtration and re-circulation (pushing) process is generated by a fan unit specifically sized for the system and positioned downstream from the filtration unit. To significantly reduce the system’s noise level, the fan is mounted in a sound absorbing enclosure and powered and controlled by intelligent controls.

4. Re-circulation (Push): Once the particulates have been filtered, the filtered air can be re-circulated. By re-circulating the air, energy cost savings, specifically in climate controlled environments, can be recognized.

PUSH/PULL SYSTEM SPECIFICATIONS:

• Airflow: 6000 cfm• Input Power: 380-480/3/50-60 Hz• Maximum Fan Power Consumption: 10 HP (7.5 kW)• Dimensions: H x W x D: 2865 x 1200 x 2438 mm• Ducting Height: 4-6 m• Weight: 620 kg, does not include ducting or in/outlet grids• Maximum Noise Level: 68 dB(A) according to ISO 3746• Throw of the air flow is adjustable from 5-23 m• Operating Temperatures: Minimum: 20°C, Maximum: 45°C• Drum Capacity: 100 liters• Certification: System Controls-UL 508A, Fan Motor-UR, Frequency Inverter-UL

• Cover Area: – Minimum Length: 10 m – Maximum Length: 50 m – Minimum Width: 5 m – Maximum Width: 23 m

The solution for indoor air pollution in the industry

Benefits• Cleaner work environment –

Reduce dust and dirt in operator and surrounding work areas.

• Custom engineered to meet facility and application requirements.

• Easy installation – Position the filter and fan unit on the floor, a platform or a mezzanine.

• Low noise level – Will not contribute to increased noise levels.

Suitable solutions for all circumstancesSome examples of push/pull-systems incorporating Lincoln’s SCS filter units and the FAN 120 fans are given below:

U-shaped push/pull-system with 1 filter unit and 1 fan.

Double-parallel push/pull-system with 2 filter units and fans.

Composite system.

rev.: E-WFE08-EN-17-10-16

95

HARD AUTOMATION

STICK WELDERS



HARD AUTOMATION

Positioners

Multi-process transformer and inverter Power Sources cover all requirements presented. User friendly designs allow a wide variety of weld procedures to produce consistent, quality welds.

Manually or automatically position the weld head to the weld joint independently from the positioning equipment.

Work-pieces can always be placed in the most convenient working position.

Position the work piece with accuracy or rotation at a constant speed depending on the application.

The vibration free column and boom can be used for positioning the weld head for the automated welding of a variety of work pieces from small pipe to large tanks. Both longitudinal and circumferential welds can be easily automated using additional rollerbeds.

Use our equipment and process know how for a wide variety of applications.

Lincoln offers a full range of Pre-Engineered & Custom Products and Services:

• Welding Gantries• Tank Welders• Pipe Welders• Column and Boom Systems• Turntables and Positioners• Welding Lathes• Rollerbeds

Lincoln Electric offers solutions for HARD AUTOMATION systems which encompasses fixed automation and programmable automation products including automatic welding equipment, wire feeders, process controllers, positioners, workholding devices, welding consumables and bolt-on accessories.

Do you want to find out more about Hard Automation?Go to our website!

Power Sources Column & Boom Manipulators

Cross Slides Cladding Systems

Rollerbeds / Idlers

rev.: E-HA01-EN-17-10-16

Column & Boom Manipulators

STRIP CLADDING

STRIP CL ADDING CONSUMABLES AND EQUIPMENT


Introduction

Cladding is a fundamental process in the Fabrication industry and is applied across the whole spectrum of applications – from the nuclear, oil and gas industries to petrochemicals and steelmaking. Cladding is required on the process side of high pressure Critical Process Plant Equipment (CPE) to provide corrosion resistance against highly severe corrosive service fluid or to increase wear resistance of a component being subjected to heavy wear and tear applications e.g. continuous casting rollers in Steel mills. While CMn substrates, low alloy steels and other materials provide strength and other physical properties, cladding provides the desired corrosion and wear resistance. The result is extraordinary flexibility and cost savings.

There are many ways to apply this corrosion resistant layer – either by using roll-bonded or explosive bonded clad plates or by applying our more flexible weld cladding on a CMn or low alloy steel base material.

Cladding Processes

While most of the existing arc and electro slag welding processes can be utilized for weld cladding, strip cladding with submerged arc and electro slag welding process are the most attractive choices for applications that require large surface area coverage due to their substantially higher deposition and surface area coverage rates.

Strip Cladding Processes

Magnetic Steering Devices • Neutralises effect of strong electromagnetic pull generated by

high welding current, enabling weld bead to spread wider with smoother overlap and edge profile

• Digitally controlled magnetic steering devices for Electro Slag – Conventional and H-ESC* with strip size ≥ 60 mm

• Air-cooled, and field poles can be changed between North and South quickly

• Current range of up to 15A

Hot Wire Feeding Mechanism • For H-ESC*, multiple hot metal cored wires are fed to the molten

weld pool to achieve final chemistry in single layer with increased productivity

• Hot wire feeding mechanism uses modified Idealarc® DC 1000 or Power Wave® AC/DC 1000 SD power sources.

Welding Heads, Accessories and Controller

Cladding Head• In-house designed cladding heads for wide range of strip widths

(15 to 120 mm)

• Water-cooled and robust modular design

• Power cables can be added as required

• Easily oriented for desired welding direction

• Specifically designed for use in H-ESC* applications involving simultaneous feeding of strip, flux and hot wire

rev.: E-CLAD01-EN-17-10-16


Welding Power Sources and Strip Feeding Device Lincoln Idealarc® DC 1000 and 1500 power sources along with NA-5 or NA-3 strip feeding head and controller are the most widely used combinations across the world for conventional strip cladding. Multiple power sources can easily be connected in parallel to generate welding currents of up to 3000 Amp or more. Set of modified new generation inverter-based Power Wave® AC/DC 1000 SD or Modified Idealarc® DC 1000 power sources are connected in parallel for H-ESC* applications in conjunction with ‘Hybrid 3D Z5’ control system. Same combinations can now as well be used for conventional strip cladding.

Features• The most widely used power sources, controllers

and strip feeders in the world.• Can easily be combined in parallel to supply

a current of 3 000 Amp or more.• Energy saving while using Inverter

based power sources.

* Patent Pending

Total Solution for Strip CladdingThe most important key to the success of Strip cladding process is to have the right combination of:

• Welding Consumables i.e. Strip, Flux and Wire (where applicable)

• Cladding Head

• Magnetic Steering Devices

• Welding Power Sources and Strip Feeding Device

• Hot Wire Feeding Mechanism

• Automatic Welding Control SystemIf even one of these key elements is absent, the process is likely to fail in achieving its desired output.

Lincoln Electric is the world leader, as it has top quality solutions and the desired expertise in all the above fields.

POWER SOURCE, STRIP FEEDER

AND CONTROLLER

MAGNETIC STEERING

DEVICES

AUTOMATIC CONTROLLER

AND DATA LOGGING UNIT

TOTAL SOLUTION

FOR STRIP CLADDING

CLADDING HEAD

WELDING CONSUMABLES

STRIP CL ADDING CONSUMABLES AND EQUIPMENT

rev.: E-CLAD02-EN-17-10-16


GUNS & TORCHES Built for Operator ComfortRobust DesignConsistent High Performance Arc

GUNS AND TORCHES


TIG Torches

LINC TORCH™Quality makes the difference

ERGONOMIC GRIP

TERMINAL PART IN LEATHER

HIGH FLEXIBILITY CABLE

ONE BUTTON MODULE + POTENTIOMETER

(OPTIONAL)

PREMIUM

STANDARD

ERGO

PREMIUM

ERGO FLEX

PREMIUM

VALVE

PREMIUM

STANDARD

LEVER

Lincoln Electric presents new TIG torches: Linc Torch Premium

The Linc Torch Premium (LTP) range is enhancing our current range of TIG torches, providing better performance for the welder’s comfort. Designed to meet the challenges of a variety of applications in maintenance, fabrication or construction sites. New torches are offered in both air-cooled and water-cooled version. High quality components and modern design decide about the welding process efficiency and operator’s comfort.

Both LT and LTP torches are made in Europe, according to high quality standards. Their expendables are compatible with the international standard.

Range Overview

Four configurations

Cooling Size Power rating DC-AC

Length(m)

LTP Ergo LT Ergo LTP Ergo Flex LTP Valve Conn. 10-25

LTP ValveConn. 35-50 LTP Lever LT Lever

(Air)

17140A DC 100A AC @ 35%

4 K10529-17-4 K10513-17-4 -- K10529-17-4VS K10529-17-4V -- K10513-17-4F

8 K10529-17-8 K10513-17-8 -- -- K10529-17-8V K10529-17-8F --

26180A DC 130A AC @ 35%

4 K10529-26-4 K10513-26-4 K10529-26-4X -- K10529-26-4V -- K10513-26-4F

8 K10529-26-8 K10513-26-8 K10529-26-8X -- K10529-26-8V K10529-26-8F --

12 K10529-26-12 -- -- -- -- -- --

(Water)

20220A DC 165A AC @ 100%

4 K10529-20-4 -- -- -- -- K10513-20-4F

8 K10529-20-8 -- -- -- -- K10529-20-8F --

18320A DC 230A AC @ 100%

4 K10529-18-4 K10513-18-4 K10529-18-4X -- -- K10513-18-4F

8 K10529-18-8 K10513-18-8 K10529-18-8X -- -- K10529-18-8F --

18SC400A DC 280A AC @ 100%

8 K10529-18SC-8 -- -- -- -- -- --

“F” model torches feature a lever grip“V” model torches have a gas valve for use with power sources without built-in solenoid valve“X” model torches feature a flexible head for greater comfort and improved access to tight spaces

rev.: E-ACC01-EN-17-10-16

140A DC100A AC @ 35%


TIG TorchesGUNS AND TORCHES

KP10516-11 : Short & Long Cap, Collet & Collet Body 1.6mm & 2.4mm, Ceramic Nozzles 6.5mm & 11mm KP10516-12: Short & Long Cap, Collet & Collet Body 2.4mm & 3.2mm, Ceramic Nozzles 9.5mm & 12.5mm

Air cooled

LTP 17 G 4M Ergo K10529-17-4LTP 17 G 8M Ergo K10529-17-8LTP 17 G 4M Valve Conn. 10-25 K10529-17-4VSLTP 17 G 4M Valve Conn. 35-50 K10529-17-4VLTP 17 G 8M Valve Conn. 35-50 K10529-17-8VLTP 17 G 8M Lever K10529-17-8F


STANDARD RANGE PREMIUM RANGE

PREMIUM PREMIUMSTANDARDSTANDARD

All the expendables are sold in packs of 10 pcs.The part numbers in bold are the ones which are standard in the torch.

PREMIUM

LTP 17 G Ergo

CERAMIC NOZZLEKP10514-size

COLLET BODYKP10505-size

GAS LENSKP10507-size


Φ (mm)

Lincoln Part.n.

Int. Part.n.

1.0 KP10505-10 10N301.6 KP10505-16 10N312.4 KP10505-24 10N323.2 KP10505-32 10N28

Φ (mm)

Lincoln Part.n.

Int. Part.n.

6.5 KP10514-4 10N508.0 KP10514-5 10N499.5 KP10514-6 10N4811.0 KP10514-7 10N4712.5 KP10514-8 10N4616.0 KP10514-10 10N4519.0 KP10514-12 10N44

Φ (mm)

Lincoln Part.n.

Int. Part.n.

1.0 KP10507-10 45V241.6 KP10507-16 45V252.4 KP10507-24 45V263.2 KP10507-32 45V274.0 KP10507-40 45V28

Φ (mm)

Lincoln Part.n.

Int. Part.n.

6.5 KP10515-4 54N188.0 KP10515-5 54N179.5 KP10515-6 54N1611.0 KP10515-7 54N1512.5 KP10515-8 54N1417.5 KP10515-12 54N19

Φ (mm)

Lincoln Part.n.

Int. Part.n.

1.0 KP10503-10 10N221.6 KP10503-16 10N232.4 KP10503-24 10N243.2 KP10503-32 10N254.0 KP10503-40 54N20

ADAPTOR (ONLY NEEDED FOR GAS LENS)

KP10511-254N01

CAP

O RINGKP10509-4

COLLETKP10503-sizeShort: KP10509-1

57Y04

Medium: KP10509-2 57Y05

Long: KP10509-3 57Y02

INSULATORKP10511-118CG

LTP 17 G / LT 17 G

LT 17 G Ergo

LTP 17 G Valve

LT 17 G Lever

LTP 17 G Lever

Accessory Kits:

rev.: E-ACC02-EN-17-10-16

PREMIUM


LTP 26 G 4M Ergo K10529-26-4LTP 26 G 8M Ergo K10529-26-8LTP 26 G 12M Ergo K10529-26-12

LTP 26 G 4M Ergo Flex K10529-26-4XLTP 26 G 8M Ergo Flex K10529-26-8XLTP 26 G 4M Valve Conn. 35-50 K10529-26-4VLTP 26 G 8M Valve Conn. 35-50 K10529-26-8VLTP 26 G 8M Lever K10529-26-8F


LTP 26 GErgo / Flex

KP10516-11: Short & Long Cap, Collet & Collet Body 1.6mm & 2.4mm, Ceramic Nozzles 6.5mm & 11mm KP10516-12: Short & Long Cap, Collet & Collet Body 2.4mm & 3.2mm, Ceramic Nozzles 9.5mm & 12.5mm

LT 26 GErgo

LTP 26 GLever

LTP 26 G Valve

PREMIUMPREMIUMSTANDARDSTANDARD

Accessory Kits:





Φ (mm)

Lincoln Part.n.

Int. Part.n.

1.0 KP10505-10 10N301.6 KP10505-16 10N312.4 KP10505-24 10N323.2 KP10505-32 10N28

Φ (mm)

Lincoln Part.n.

Int. Part.n.


Φ (mm)

Lincoln Part.n.

Int. Part.n.


Φ (mm)

Lincoln Part.n.

Int. Part.n.


Φ (mm)

Lincoln Part.n.

Int. Part.n.

1.0 KP10503-10 10N22

1.6 KP10503-16 10N23

2.4 KP10503-24 10N243.2 KP10503-32 10N25

4.0 KP10503-40 54N20

LTP 26 G / LT 26 G

180A DC130A AC @ 35%

STICK WELDERS



Air cooled



KP10511-254N01

CAP

O RINGKP10509-4


57Y04

Medium: KP10509-2 57Y05

Long: KP10509-3 57Y02


LT 26 GLever

rev.: E-ACC03-EN-17-10-16


220A DC165A AC @ 100%

GUNS AND TORCHES

LTP 20 WErgo

LTP 20 W 4M Ergo K10529-20-4LTP 20 W 8M Ergo K10529-20-8LTP 20 W 8M Lever K10529-20-8F

LT 20 W 4M Lever K10513-20-4F





Φ (mm)

Lincoln Part.n.

Int. Part.n.

1.0 KP10502-10 13N21

1.6 KP10502-16 13N22

2.4 KP10502-24 13N23

3.2 KP10502-32 13N24

Φ (mm)

Lincoln Part.n.

Int. Part.n.

1.0 KP10504-10 13N261.6 KP10504-16 13N272.4 KP10504-24 13N283.2 KP10504-32 13N29

Φ (mm)

Lincoln Part.n.

Int. Part.n.


Φ (mm)

Lincoln Part.n.

Int. Part.n.

1.0 KP10506-10 45V421.6 KP10506-16 45V432.4 KP10506-24 45V443.2 KP10506-32 45V45

Φ (mm)

Lincoln Part.n.

Int. Part.n.

6.5 KP10513-4 53N588.0 KP10513-5 53N599.5 KP10513-6 53N6011.0 KP10513-7 53N6112.5 KP10513-8 53N61S

PREMIUMSTANDARD

PREMIUM

Water cooled


LTP 20 W / LT 20 W


CAP

O RINGKP10508-4


41V33

Medium: KP10508-2 41V35

Long: KP10508-3 41V24

INSULATORKP10510-1598882

LTP 20 W Lever

LT 20 WLever

KP10516-10 : Short & Long Cap, Collet & Collet Body 1.6mm & 2.4mm, Ceramic Nozzles 6.5mm & 11mm

Accessory Kits:

TIG Torches

rev.: E-ACC04-EN-17-10-16


320A DC230A AC @ 100%

KP10516-11: Short & Long Cap, Collet & Collet Body 1.6mm & 2.4mm, Ceramic Nozzles 6.5mm & 11mm KP10516-12: Short & Long Cap, Collet & Collet Body 2.4mm & 3.2mm, Ceramic Nozzles 9.5mm & 12.5mm

Accessory Kits:


LTP 18W 4M Ergo K10529-18-4LTP 18W 8M Ergo K10529-18-8LTP 18W 4M Ergo Flex K10529-18-4XLTP 18W 8M Ergo Flex K10529-18-8XLTP 18W 8M Lever K10529-18-8F

LT 18 W 4M Ergo K10513-18-4LT 18 W 8M Ergo K10513-18-8LT 18 W 4M Lever K10513-18-4F

LT 18 WErgo LTP 18 W

Lever

PREMIUM

LT 18 W Lever

LTP 18 WErgo/Flex

STANDARDSTANDARD

PREMIUM





Φ (mm)

Lincoln Part.n.

Int. Part.n.

1.0 KP10505-10 10N301.6 KP10505-16 10N312.4 KP10505-24 10N323.2 KP10505-32 10N28

Φ (mm)

Lincoln Part.n.

Int. Part.n.


Φ (mm)

Lincoln Part.n.

Int. Part.n.


Φ (mm)

Lincoln Part.n.

Int. Part.n.


Φ (mm)

Lincoln Part.n.

Int. Part.n.

1.0 KP10503-10 10N22

1.6 KP10503-16 10N23

2.4 KP10503-24 10N243.2 KP10503-32 10N25

4.0 KP10503-40 54N20


KP10511-254N01

Water cooled



LTP 18 W / LT 18 W

CAP

O RINGKP10509-4


57Y04

Medium: KP10509-2 57Y05

Long: KP10509-3 57Y02


rev.: E-ACC05-EN-17-10-16


GUNS AND TORCHES


GAS LENSKP10507-sizeΦ

(mm)Lincoln Part.n.

Int. Part.n.

1.0 KP10503-10 10N221.6 KP10503-16 10N232.4 KP10503-24 10N243.2 KP10503-32 10N254.0 KP10503-20HD 54N20HD

Φ (mm)

Lincoln Part.n.

Int. Part.n.

1.01.62.43.2

KP10504-53 NCB-53

4.0 KP10504-36 NCB-36

Φ (mm)

Lincoln Part.n.

Int. Part.n.



Φ (mm)

Lincoln Part.n.

Int. Part.n.

1.0 KP10507-804 18GL041.6 KP10507-816 18GL162.4 KP10507-832 18GL323.2 KP10507-818 18GL184.0 KP10507-853 18GL53

LTP 18 W SCErgo

PREMIUM

400A DC280A AC @ 100%

Water cooled

LTP 18 W SC Ergo K10529-18SC-8

PREMIUM RANGE

LTP 18 W SC


KP10516-13 : Short & Long Cap, Collet & Collet Body 3.2mm & 4.0mm, Ceramic Nozzles 9.5mm & 12.5mm

Accessory Kits:

CAP

O RINGKP10509-4


57Y04

Medium: KP10509-2 57Y05

Long: KP10509-3 57Y02

INSULATORKP10511-1818NG

TIG Torches

rev.: E-ACC06-EN-17-10-16




Non-Radioactive Tungsten Electrodes

LTP 17G LT 17G LTP 18W LT 18W LTP 18W SC LTP 20W LT 20W LTP 26G LT 26G

Power ratingDC 140A 320A 400A 220A 180A

AC 100A 230A 280A 165A 130A

Duty Cycle 35% 100% 100% 100% 35%

Electrode Φ (mm) 1.0÷2.4 1.0÷4.0 1.0÷4.0 1.0÷3.2 1.0÷4.0

Voltage class L L L L L

Welding gas Argon DIN 32 526/1 Argon DIN 32 526/1 Argon DIN 32 526/1 Argon DIN 32 526/1 Argon DIN 32 526/1

Gas flow rate (l/min) 7÷15 7÷20 7÷20 8÷22 8÷20 7÷18

Cooling Gas Water Water Water Gas

Highest temperature cooling medium at entry hose package - 60°C 50°C 60°C 60°C 50°C -

Minimum quantity of cooling flow (l/min) - 1.0 0.9 1.0 1.0 0.7 -

Lowest pressure of entry - 2.5 bar 2.5 bar 2.5 bar -

Highest pressure of entry - 5.0 bar 3.5 bar 5.0 bar 5.0 bar 3.5 bar -

Net weight (kg) (4m) (*) 1.82/2.02 2.00/2.10 2.51 2.38/3.53 - 1.71 2.36 2.44/2.54 2.33/2.38

Net weight (kg) (8m) (*) 3.39/3.55 3.95 4.51 3.65 4.56 2.91 4.20/4.30 4.12

Net weight (kg) (12m) - - - - 6.06 -

LTP LT

Operating Temperature: -10°C ~ +55°C -10°C ~ +40°C

Storage Temperature: -25°C ~ +55°C

Relative air humidity: Up to 90% at 20°C

(*) Weight depends on the torch version

A complete range of tungsen electrodes is proposed as alternative to thoriated, offering superior welding characteristics and avoiding problems with radioactivity.• Longer lifetime• Smaller diameter with same welding currents• Less grinding• Faster starts• Better arc stability

TYPE COLOUR APPLICATION

WP Pure

Green Nickel, Bronze, Nickel Alloys, Aluminium, Aluminium Alloys, Magnesium, Magnesium Alloys

WR2 Blended Oxide

Turquoise Aluminium, Steel, Stainless Steel, Copper and Brass applications

WLa15Lanthanated

Gold Aluminium, Aluminium Alloys, Stainless Steel, Copper, Bronze, Titanium

WCe20Ceriated

Grey Steel Carbon, Steel, Stainless Steel, Bronze, Copper, Titanium

ITEM n°: L = 150mm

ITEM n°: L = 175mm

Diameter (mm)

Pack

2124905 2124058 1.0 102124916 2124069 1.6 102124927 2124074 2.0 102124938 2124080 2.4 102124949 2124091 3.2 102124960 2124102 4.0 52124410 2124300 1.0 102124421 2124311 1.6 102124432 2124322 2.0 102124443 2124333 2.4 102124454 2124344 3.2 102124806 2105479 1.0 102124817 2105396 1.6 102124828 2105417 2.0 102124839 2105414 2.4 102124850 2105419 3.2 10– 2105480 4.0 52124707 2104797 1.0 102124718 2103864 1.6 102124729 2103868 2.0 102124740 2103865 2.4 102124751 2103866 3.2 102124762 2103867 4.0 5

Two ranges:• LT Standard • Premium

Four configurations:• Ergo • Ergo Flex • Valve • Lever

Five sizes:• 17 • 18 • 18 SC • 20 • 26

rev.: E-ACC07-EN-17-10-16

STICK WELDERSGUNS AND TORCHES MIG Guns


LINC GUN™

LGS 150 G 3M K10429-15-3MLGS 150 G 4M K10429-15-4MLGS 150 G 5M K10429-15-5M

NOZZLE SUPPORTW/O SPRINGS52151-1 (M6)

SPRINGKP10400-1

LGS 150 G

CONTACT TIPKP10440-size (M6x25)

Ø Part.n.

ECu

0.6 mm KP10440-060.8 mm KP10440-080.9 mm KP10440-091.0 mm KP10440-10

CuCrZr0.8 mm KP10440-08C1.0 mm KP10440-10C

Al (Ecu)0.8 mm KP10440-08A1.0 mm KP10440-10A

150A-180A

The ultimate MIG guns• Complete range to support all your welding applications.• High quality rugged product build according to Lincoln standards.• Ergonomic hand grip for comfortable welding day in day out.• Flexible “Ball Joint” for comfortable welding in any position.• Two metal springs provide optimum cable protection (except LGS 150 G).• Retractable pins for a consistently reliable connection provided as standard.• Cable packages use a heat resistant cross link cable for heavy environmental conditions.• Wearing parts following the industry standard CE IEC 60974-7.

ERGONOMIC GRIP RETRACTABLE PINS

FLEXIBLE ‘BALL JOINT’

2 SPRINGS

LGS 250 GLGS 250 G 3M K10429-25-3MLGS 250 G 4M K10429-25-4MLGS 250 G 5M K10429-25-5M

KP10463-2 (Ø=18mm)

NOZZLE

TIP HOLDERKP10455-8 (M6x35)

KP10461-2 (Ø=15mm)KP10461-11 (Ø=15mm) (HD)


KP10460-2 (Ø=20mm)

KP10461-7 (Ø=11mm)

KP10462-2 (Ø=14mm)KP10466-1 (Ø=11mm)

200A-230A

Ø Part.n.

ECu


CuCrZr0.8 mm KP10441-08C1.0 mm KP10441-10C1.2 mm KP10441-12C

Al (Ecu)0.8 mm KP10441-08A1.0 mm KP10441-10A1.2 mm KP10441-12A

NOZZLE

KP10461-1 (Ø=12mm)

KP10460-1 (Ø=16mm)

KP10461-6 (Ø=9.5mm)

KP10463-1 (Ø=16mm)

KP10468 (Ø=6mm)for Innershield

Air cooled60% (10 min.)Mix 150ACO₂ 180AØ 0.6-1.0

LGS 150 G


LGS 250 G

SPRINGKP10401-1

rev.: E-ACC08-EN-27-12-17

GUNS AND TORCHES


MIG Guns

LGS 240 G


KP10404-WT

KP10404-RD

KP10404-CR(ceramic)



KP10461-4 (Ø=12.5mm)

KP10461-9 (Ø=10mm)

KP10460-4 (Ø=17mm)

KP10463-4 (Ø=17mm)

NOZZLE

Ø Part.n.

ECu


CuCrZr0.8 mm KP10440-08C1.0 mm KP10440-10C1.2 mm KP10440-12C

Al (Ecu)0.8 mm KP10440-08A1.0 mm KP10440-10A1.2 mm KP10440-12A

220A-250ALGS 240 G

GAS DIFFUSER


KP10405-WT

KP10405-CR(ceramic)



KP10461-3 (Ø=16mm)

KP10461-8 (Ø=12mm)

KP10460-3 (Ø=20mm)

KP10463-3 (Ø=20mm)

NOZZLE

Ø Part.n.

ECu


CuCrZr

0.8 mm KP10445-08C0.9 mm KP10445-09C1.0 mm KP10445-10C1.2 mm KP10445-12C1.6 mm KP10445-16C

Al (Ecu)

0.8 mm KP10445-08A1.0 mm KP10445-10A1.2 mm KP10445-12A1.6 mm KP10445-16A

300A-330ALGS 360 G

GAS DIFFUSER

LGS 360 G



rev.: E-ACC09-EN-27-12-17

STICK WELDERSGUNS AND TORCHES


LGS 505 W

LGS 505 WLGS 505 W 3M K10429-505-3MLGS 505 W 4M K10429-505-4MLGS 505 W 5M K10429-505-5M

KP10408-WT

KP10408-BR

KP10408-CR(ceramic)

KP10450 - L77

GAS DIFFUSER

INSULATING WASHER


NOZZLE

KP10461-5 (Ø=16mm)

KP10461-10 (Ø=14mm)

KP10460-5 (Ø=20mm)

KP10463-5 (Ø=20mm)

Ø Part.n.

ECu


CuCrZr

0.8 mm KP10445-08C0.9 mm KP10445-09C1.0 mm KP10445-10C1.2 mm KP10445-12C1.6 mm KP10445-16C

Al (Ecu)

0.8 mm KP10445-08A1.0 mm KP10445-10A1.2 mm KP10445-12A1.6 mm KP10445-16A

450A-500A

KP10456-6 (L=25) (HD)

KP10456-2 (L=25)

TIP HOLDER

Water cooled100% (10 min.)Mix 450ACO₂ 500AØ 0.8-1.6

PP 405 WC (PREMIUM GUN) LGPPW 405 8M K10413-PPW405-8M

KP10456-6 (L=25) (HD)KP10408-WT

KP10456-2 (L=25)

KP10408-BR

KP10408-CR(ceramic)

TIP HOLDERGAS DIFFUSER


KP10461-5 (Ø=16mm)

KP10461-10 (Ø=14mm)

KP10460-5 (Ø=20mm)

NOZZLE

LGPPW 405 8M

Ø Part.n.

ECu1.0 mm KP10445-101.2 mm KP10445-12

CuCrZr1.0 mm KP10445-10C1.2 mm KP10445-12C

Al (Ecu)

1.0 mm KP10445-10A1.2 mm KP10445-12A

350A-400A

Water cooled100% (10 min.)Mix 350ACO₂ 400AØ 0.8-1.6Poti 1x10KΩ Plug 12pins

MIG Guns

rev.: E-ACC10-EN-27-12-17

GUNS AND TORCHES


MIG Guns

Metal transfer (Short Arc STT® / Spray Arc / Pulse)

Liners

KEY: ● Excellent ● Good

PICTURE FOR TYPE ITEM NUMBER COLOUR WIRE Ø

LGS1

50G

LGS2

50G

LGS2

40G

LGS3

60G

LGS5

05W

PP40

5WC

Steel

Steel linerKP10410-length – 0.8-1.2 – – – – –

KP10411-length (*) – 0.8-1.6 – – – –

Steel liner, coated

KP10413-length blue 0.6-1.0 – – –

KP10414-length red 0.8-1.2 – –

KP10415-length yellow 1.2-1.6 – – – – –

ALU, CuSi

PTFE liner

KP10422-length blue 0.8-1.0 – – –

KP10418-length red 0.8-1.2 –

KP10420-length yellow 1.2-1.6 – – – –

Graphite liner KP10430-length (**) black 1.0-1.6 – – – – –

PTFE liner with copper spiral end

KP10419-length red 0.8-1.2 –

Available in 3M-4M-5M lengths

(*) Available also in 8M length (**) Available in 8M length only

Standard in the gun Option

Short Arc STT® Spray Arc Pulse

LGS

150

G

LGS

250

G

LGS

240

G

LGS

360

G

LGS

505

G

LGS

150

G

LGS

250

G

LGS

240

G

LGS

360

G

LGS

505

G

LGS

150

G

LGS

250

G

LGS

240

G

LGS

360

G

LGS

505

G

Steel Solid (80%Ar/20%CO₂)

0.8 ● ● ● ● ● ● ● ● ● ● ● ● ● ●1.0 ● ● ● ● ● ● ● ● ●1.2 ● ● ● ● ● ● ● ●

Steel Cored (80%Ar/20%CO₂)

1.2 ● ● ● ● ● ●1.4 ● ●1.6 ●

Stainless (98%Ar/2%CO₂)

0.8 ● ● ● ● ● ● ● ● ● ● ● ●1.0 ● ● ● ● ● ● ● ● ●1.2 ● ● ● ● ● ● ● ●

Aluminium (100% Ar)

1.0 ● ● ● ●1.2 ● ● ●1.6 ● ●

rev.: E-ACC11-EN-27-12-17

STICK WELDERSGUNS AND TORCHES


Plasma Torches

SHIELD CUP BODYELECTRODE TIPGAS DISTRIBUTOR

W03X0893-77AW03X0893-75A W03X0893-5R W03X0893-76A (25A)

SPACER

W03X0893-78R

SHIELD CUP BODY

ELECTRODESHIELD CAP

TIP

CONTACT

STAND OFF

SHIELDED

GOUGING

EXTENDED

SPACER

W03X0893-41A

W03X0893-43A

W03X0893-25A(contact, stand off, shielded & gouging)

W03X0893-14R

W03X0893-44A

W03X0893-48A

W03X0893-27A (40A)W03X0893-28A (50A)W03X0893-29A (60A)(stand off)

W03X0893-26A (40A)(contact)

W03X0893-33A (50A)W03X0893-34A (60A)(shielded)

W03X0893-53A(extended)

W03X0893-39A(gouging)

W03X0893-40A (40A)W03X0893-54A (60A)(extended)

W03X0893-21A

RETAINING CAP

GAS DISTRIBUTOR

W03X0893-50R

SHIELD CUP BODYELECTRODE SHIELD CAPTIP

SHIELDED

GAS DISTRIBUTOR

W03X0893-43AW03X0893-25A W03X0893-46AW03X0893-52A (40A)W03X0893-33A (50A)W03X0893-34A (60A)

W03X0893-50R

LC 25 Hand 3M PTH-C25A-SL-3MR

LC 65 Hand 7.5M PTH-061A-CX-7M5ALC 65 Hand 15M PTH-061A-CX-15MA

LC 65M Machine 7.5M PTM-061A-CX-7M5ALC 65M Machine 15M PTM-061A-CX-15MA

LC 25 (Hand)

LC 65 (Hand)

LC 65M (Machine)

LC 25

LC 65

Air cooled96 l/[email protected] bar25A@60%10mm mild steel12mm severance



10/12 mm

25/30 mm

25/30 mm

LC 65M

rev.: E-ACC12-EN-27-12-17

GUNS AND TORCHES


Plasma Torches

CUTTING ATTACHMENT FOR LC25/65/105W0300699A

Sub-micron filter for compressed air. Designed to remove moisture, oils and sprays particles from air compressors, thus providing clean, free of oil and dry air.

• Better quality of the cut• Longer life time of consumables• Increases time life of the torch itself• Compatible with any plasma cutting machine

and torch• Filter cartridge easily replaceable• Useful also for different applications machines

(spray painting, pneumatic tools, ...)

AIR FILTER LAF1250W88X1456A

FILTER CARTRIDGEW8800117R

Accessories

SHIELD CUP BODY

ELECTRODE

SHIELD CAP

SHIELDED

GOUGING

EXTENDED

W03X0893-66A

W03X0893-60A(shielded & gouging)

W03X0893-67A

W03X0893-69A

W03X0893-57A(extended) W03X0893-74A

TIP

W03X0893-61A (40A)W03X0893-62A (60A)W03X0893-63A (80A)W03X0893-64A (100A)(shielded)

W03X0893-65A(gouging)

GAS DISTRIBUTOR

W03X0893-70R

SHIELD CUP BODYELECTRODE TIP

SHIELDED

GAS DISTRIBUTOR

W03X0893-66AW03X0893-112A (OHMIC)

W03X0893-101A W03X0893-102A (40-80A)W03X0893-103A (100A)

W03X0893-104A (40A)W03X0893-105A (60A)W03X0893-106A (80A)W03X0893-107A (100A)

SHIELD CAP

W03X0893-110A(40-80A)W03X0893-111A (100A)

LC 105 Hand 7.5M PTH-101A-CX-7M5ALC 105 Hand 15M PTH-101A-CX-15MA

LC 105M Machine 7.5M PTM-101A-CX-7M5ALC 105M Machine 15M PTM-101A-CX-15MA

LC 105 (Hand)

LC 105M (Machine)

LC 105



W03X0893-58A (40A)W03X0893-59A (60A)W03X0893-72A (80A)W03X0893-73A (100A)(extended)

40/45 mm

40/45 mm

LC 105M

rev.: E-ACC13-EN-27-12-17


GUNS AND TORCHES Innershield Guns

INNERSHIELD GUNSMagnum® self-shielded flux-cored welding (FCAW-S) guns are rugged and reliable, while remaining lightweight, flexible and maneuverable. A number of models are offered for amperage ratings from 350 to 450 amps. Lincoln Electric Magnum® guns for Innershield® welding are a great choice.

• Heavy-duty gun trigger switch – For positive electrical contact and long life.• Reinforced rubber jacket – Adds strength and long life to cable.• Alternate gun tubes – Available for select guns to reach welds with limited

accessibility.• All guns are rated at 60% duty cycle.

Order Information

Part Number Rated Amperage

Wire diameter(mm)

Cable length(m)

Tube angle (°)

K126-1 350 1.6-2.4 3 62

K126-2 350 1.6-2.4 4.5 62

K115-1 450 2.4-3.0 3 82

K115-2 450 2.4-3.0 4.5 82

K345-10 350 1.7-2.0 3 90

K126-X

K115-X

K345-10

ROBOTIC GUNSMagnum® PRO Robotic Guns• Single Tool Center Point (TCP) – Changing between 350A and 550A expendables

does not alter the robot TCP.• Robust Cable System – Cables exceed industry standards by a factor of two in

durability testing.• Simplified Expendable Parts Selection – 350A and 550A rated consumables are

interchangeable across all gun models.• HexConnect™ Gun Bushing – Ensures better electrical conductivity through full

face contact as opposed to rotating connections that have single line contact.• Extended Reach – Mounting bracket is designed to optimize clearance for tough

to reach welding applications• Retractable pins for a consistently reliable connection provided as standard.• Cable packages use a heat resistant cross link cable for heavy environmental conditions.• Wearing parts following the industry standard CE IEC 60974-7.

Thru-Arm

External Dress

Advantages• Consistent wire feeding for robotic Aluminium welding.

• Touch-retract start technology to initiate each robotic weld with no spatter or burnback.

• Consistent arc start from start to finish.

• Delivers more than 250,000 starts and stops with a single contact tip.

• Decrease change overs 50%.

Designed for welding aluminium parts robotically, AutoDrive SA is a high-performance aluminium servo torch solution to address the common problems with robotic aluminium welding.

Autodrive SA Torch

Robotic Guns

rev.: E-ACC14-EN-25-09-17


GUNS AND TORCHES Gouging Torches

FLAIR 600 (FL060180600-L)

FLAIR 1600 (FL060181600-L)

FLAIR 600 & 1600™When continuity counts!• 360° rotating torch – The torch can rotate 360° on the monocable.

This results in a comfortable and better freedom of movement. • Smooth finished body for perfect airflow – Manufactured with

the greatest accuracy. The inner body is perfectly shaped which results in a perfect airflow, thus in a better cooling as well as a longer life time.

• Highly conductive extruded body and nozzle (non-casted) – Better conduction and less heat development and consequently a longer product lifetime.

• Thicker high heat resistant insulation – Longer product lifetime but also safer, more comfortable and more productive working conditions.

• Flexible monocable (2.5 meter) – provides more ergonomical, comfortable working conditions.

Item Number Qty/boxDimensions Current

(A)Metal removal Groove width Groove depth Cut depth Bore diameter

(mm) (in) (g/cm) (oz/in) (mm) (in) (mm) (in) (mm) (in) (mm) (in)

FL064016010-L 100 pcs 4.0x305 5/32x12 150-200 10 0.90 6-8 0.24-0.31 3.4 0.12-0.16 7 0.28 8 0.31

FL064016025-L 100 pcs 5.0x305 3/16x12 150-200 12 1.08 7-9 0.28-0.35 3-5 0.12-0.20 8 0.31 8 0.31

FL064016030-L 50 pcs 6.3x305 1/4x12 200-250 18 1.61 9-11 0.35-0.43 4-6 0.16-0.24 9 0.35 10 0.39

FL064016040-L 50 pcs 8.0x305 5/16x12 250-350 33 2.96 11-13 0.43-0.51 6-9 0.24-0.35 11 0.43 12 0.47

FL064016050-L 50 pcs 9.5x305 3/8x12 350-450 49 4.39 13-15 0.51-0.59 8-12 0.31-0.47 13 0.51 14 0.55

FL064016060-L 50 pcs 13.0x305 1/2x12 700-900 89 7.97 15-17 0.59-0.67 11-14 0.43-0.55 15 0.59 16 0.63

FL064016065-L 50 pcs 13.0x335 1/2x14 700-900 89 7.97 15-17 0.59-0.67 11-14 0.43-0.55 15 0.59 16 0.63

Item Number Description

FL060280601-L Monocable for Flair 600 (600A max), 2.5m

FL060281601-L Monocable for Flair 1600 (1600A max), 2.5m

Gouging electrodesavailable in a variety of diameters to meet most application needs. They are made of carbon and have a copper coating. The use of high-quality materials ensures a stable arc and a long electrode life.

Gouging products and carbon electrodes

Flexible monocable (2.5 m)Thanks to the use of neoprene outer sheet rubber and the air-cooled conductor, the Flair monocable is outstandingly flexible. This results in more freedom of movement and more comfort.

rev.: E-ACC15-EN-25-09-17


WELDING HELMETS

WELDING HELMETS Variable Control for Shade, Sensitivity and DelayLight Weight


WELDING HELMETS

A VISION FOR BETTER WELDSIf quality and productivity are your ultimate objectives, your first priority has to be clarity. Simply put, if you can’t see the work, you can’t do the work. 4C™ technology provides a filtering lens that provides a better, clearer view of the welding puddle.The 4C™ Lens Technology upgrade to Lincoln Electric’s VIKING® welding helmets – including the 1840 series, 2450 series and 3350 series – improves visibility and reduces eye strain by minimizing the traditional lime green coloring in the helmet view screen.4C™ technology is ideal for a range of industries that use multiple welding processes, including stick, MIG and TIG: fabrication, automotive parts, appliances and more. Whatever the task at hand, 4C™ technology gives you a clear view to productivity and quality.

A vision for better weldsBetter clarity, less color

Wide-screen view

Easy on the eyes

Now you can make a good view even better. Upgrading the VIKING 1840, 2450 and 3350 series with 4C™ technology allows the view screens on these helmets to reach a 1-1-1-1 optical clarity rating and the visibility is improved by reducing the lime green tint.

4C™ technology enables you to not only see better but also see more. The large viewing area gives you a full range of vision in relation to the welding area, which enhances operator control and improves weld quality.

Improved visibility and less eye strain means greater comfort for the welder. This combined with an improved view of the weld puddle adds up to better welds.

Previous 1/1/1/2 Optical Clarity NEW 4C™ 1/1/1/1 Clarity

4C™ Technology1. Clarity – Optical clarity 1/1/1/12. Colour – Real Colour View3. Carat – Light Weight ADF4. Cut – Even Shade From Any Angle

lens technologya clear view to productivity and quality.

rev.: E-ACC16-EN-17-10-16


WELDING HELMETS

Processes• Stick• TIG, Pulsed TIG• MIG, Pulsed MIG• Flux-Cored• Gouging• Grinding

Order • K3034-3-CE Viking™ Helmet 3350 Black • K3100-3-CE Viking™ Helmet 3350 Motorhead™ • K3101-3-CE Viking™ Helmet 3350 Mojo™


Order • K3028-3-CE Viking™ Helmet 2450 Black • K3035-3-CE Viking™ Helmet 1840 Street Rod™


Order • K3023-3-CE Viking™ Helmet 1840 Black • K3024-3-CE Viking™ Helmet 1840 Tribal™

Defining A New Gold Standard in Welding Helmets

Features• Perfect 1/1/1/1 optical clarity

rating (EN379)• Continuously variable 5-13 shade

with internal control• Continuously variable sensitivity

and delay• Grind mode• 95 x 85 mm view size: Largest in

the VIKING line

• Large (133 x 114 mm) cartridge size

• 4 arc sensors• Solar cells with a replaceable

lithium battery• Magnifying ”cheater”

lens capability• New pivot style headgear

Viking™ – 3350 SeriesThe VIKING 3350, our top-of-the-line helmet series, provides the best optical clarity available in a welding helmet today and the largest viewing area in its class. The 3350 Series offers a pivot style headgear designed for greater comfort and optimal fit.

The Ideal Choice for the Journeyman Fabricator

Superior Optical Clarity

Features• Perfect 1/1/1/1 optical clarity rating

(EN379)• Continuously variable 5-13 shade


and delay• Grind mode• 97 x 62 mm view size

• Large (133 x 114 mm) cartridge size

• 4 arc sensors• Solar cells with a replaceable

lithium batteries• Magnifying ”cheater”


Features• Perfect 1/1/1/1 optical clarity

rating (EN379)• Continuously variable 9-13

shade with external control• Continuously variable

sensitivity and delay• Grind mode• 96 x 47 mm view size

• Compact DINS 110 x 90 mm cartridge size

• 2 arc sensors• Solar powered with

replaceable lithium battery• Magnifying ”cheater”


Viking™ – 2450 Series


The VIKING 2450, the latest evolution in our intermediate line of auto-darkening helmet line, provides the best optical clarity. The 2450 Series offers an improved headgear for greater comfort and flexibility.

The VIKING 1840 provides operators with the best optical clarity available in a welding helmet today. External controls allow for quick and easy shade changes. The 1840 Series offers an improved headgear for greater comfort and optimal fit.

LINCOLN ELECTRIC 3



N

LINCOLN ELECTRIC 3



N

LINCOLN ELECTRIC 3



N

rev.: E-ACC17-EN-17-10-16

119

WELDING HELMETS


Order • K3282-1-CE Viking™ Helmet 1740 Black

Processes• Stick• TIG > 10A• MIG• Flux-Cored• Gouging

Order • K2953-1-CE Linc Screen II

Make it Your Own: A Great Welding Helmet at a Great Price

Features• 1/1/1/2 optical class (EN379)• Continuously variable 9-13 shade


and delay• Grind mode• 96 x 42.5 mm view size• Compact DINS 110 x 90 mm

cartridge size• 2 arc sensors

• Solar powered with 2 replaceable AAA alkaline batteries

• Magnifying “cheater” lens capable

• Extra cover lenses enclosed – (2) inside and (5) outside

• Complementary decal sheet to decorate the helmet


There’s no shortage of features on our 1740 series helmet. Available in glossy black finish. Decorate your helmet to reflect your own personal style with the complementary decal sheet.

Light and Smart

Features• 1/2/1/2 optical class (EN379)• Continuously variable 9-13

shade with external control• 97 x 44 mm view size• 2 arc sensors

• Solar powered, with non replaceable battery, no On/Off switch

• Lightweight – 496 g• User-Friendly Design

Linc Screen II The Auto-darkening Linc Screen® II helmet is designed to combine safety with a variety of features ideal for Stick, TIG, MIG welding as well as plasma cutting. A large control located on the exterior of the helmet allows easy adjustment of the shade from 9 to 13 DIN. Equipped with two independent arc sensors. Solar cells – do not require batteries. Ideal for general purpose applications.

LINCOLN ELECTRIC 2



N

LINCOLN ELECTRIC 1



N Linc Screen

See clearly NOWLENS TECHNOLOGY

www.lincolnelectriceurope.com rev.: E-ACC18-EN-17-10-16


WELDING HELMETS

Linc Screen II 1740 Series 1840 Series 2450 Series 3350 Series

Lens Switching Speed (sec) 1/10,000 1/25,000 1/25,000 1/25,000 1/25,000

Variable Shade/Control 9-13 External 9-13 Internal 9-13 External 5-13 Internal 5-13 Internal

Magnifying “Cheater” Capable Lens - Yes Yes Yes Yes

Grind Mode Shade/Control - DIN4/Internal DIN4/External DIN3.5/Internal DIN3.5/Internal

Light Sensitivity Control - Continuous Continuous Continuous Continuous

Delay Control Dark to Light (sec) 0.70 Fixed 0.1÷1 Fully Adjustable 0.1÷1 Fully Adjustable 0.1÷1 Fully Adjustable 0.1÷1 Fully Adjustable

Arc Sensors 2 2 2 4 4

TIG Amp Rating > 10A AC/DC > 5A AC/DC ≥ 2A AC/DC ≥ 2 AC/DC ≥ 2A AC/DC

Cartridge Size (mm) 110x90 110x90 110x90 114x133 114x133

View Size (mm) 97x44 96 x 42.5 96x47 97x62 95x85

Temperature RangeOperating: -5°C ÷ 55°C

Storage:-20°C ÷ +70°C

Operating: -10°C ÷ +55°C








Weight (g) 496 528 532 595 595

Optical Clarity 1/2/1/2 1/1/1/2 1/1/1/1 1/1/1/1 1/1/1/1

Head Gear Standard LS Standard Viking Pivot Pivot Pivot

Battery Type Solar cells no battery required 2AAA Alkaline 1 CR 2450 Battery 2 CR 2450 Batteries 1 CR 2450 Battery

Black K3282-1-CE

BlackK3023-3-CE

BlackK3028-3-CE

BlackK3034-3-CE

TribalK3024-3-CE

Street Rod® K3035-3-CE

Mojo®K3101-3-CE

Linc Screen IIK2953-1-CE

Motorhead®K3100-3-CE

rev.: E-ACC19-EN-17-10-16


WELDING HELMETS

VIEW SIZE

Part Number Description Dimensions Qty/pk Linc

Scr

een

II

1740

Ser

ies

1840

Ser

ies

2450

Ser

ies

3350

Ser

ies

KP3046-100 CHEATER LENS 1.00 MAG 51 x 108 mm FRAME, 1.0 MAG 1







KP3043-1 1740 1840 OUTSIDE CLEAR COVER LENS 114 x 100 x 1.5 mm 5

KP3283-1 1740 INSIDE CLEAR LENS 95.9 x 47.2 x 1.0 mm 5

KP2897-1 1840 INSIDE CLEAR COVER LENS 96 x 51.6 x 1.0 mm 5

KP2898-1 2450 3350 OUTSIDE CLEAR COVER LENS 114 x 133 x 1.0 mm 5

KP2931-1 2450 INSIDE CLEAR COVER LENS 98.5 x 66.5 x 1.0 mm 5

KP3044-1 3350 INSIDE CLEAR COVER LENS 94.7 x 89.7 x 1.0 mm 5

KP3323-1-CE LS2 COVER LENS REPLACEMENT KIT (2 OUTSIDE 2 INSIDE) N/A 2 + 2

KP2930-1 SWEATBAND N/A 2

KP3324-1-SB SWEATBAND N/A 1

KP3284-1 1740 ADF CARTRIDGE DINS 110 X 90 mm 1

KP2853-3 1840 ADF CARTRIDGE DINS 110 X 90 mm 1

KP2932-3 2450 ADF CARTRIDGE 114 X 133mm 1

KP3045-3 3350 ADF CARTRIDGE 114 X 133mm 1

S27978-55 ADF HOLDER N/A 1

S27978-33 ADF HOLDER N/A 1

S27978-54 BLACK REPLACEMENT SHELL N/A 1

KP3282-SH BLACK REPLACEMENT SHELL N/A 1

S27978-31 BLACK REPLACEMENT SHELL N/A 1

KP3324-1-CE HEADGEAR REPLACEMENT N/A 1

KP2929-1 HEADGEAR REPLACEMENT N/A 1

KP3908-1 HEADGEAR REPLACEMENT (PIVOT TYPE) N/A 1

S27978-58 OUTSIDE COVER LENS SEAL N/A 1

S27978-32 OUTSIDE COVER LENS SEAL N/A 1

● ● ● ●● ● ● ●● ● ● ●● ● ● ●● ● ● ●● ● ● ●● ● ● ●● ●●

●● ●●

●●

● ● ● ●●

●●

●●

● ●● ●

●●

● ●●

●● ● ● ●● ●

● ●

Replacement parts

Normal96 x 47 mm

Bigger97 x 62 mm Biggest

95 x 85 mm

rev.: E-ACC20-EN-17-10-16


GUNS AND TORCHES Gouging Torches

VIKING™ PAPR 3350 WELDING HELMET Powered Air Purifying Respirator


WELDING HELMETS

Clear The Air On Welding SafetyWhere welding operations are concerned, safety is directly connected to air quality. When welding must be performed in enclosed or other areas where it is difficult to provide effective ventilation or otherwise control exposure to welding fume, the last line of defense is personal protective equipment for the individual operator. The VIKING™ PAPR (Powered Air Purifying Respirator) provides effective air-purification solution all-day long.

1/1/1/1 optical clarityThe VIKING™ PAPR is a complete system that purifies ambient air from the shop and delivers filtered, breathable air for as much as eight hours without interruption. The two-speed blower drives air through the hose to a VIKING™ 3350 helmet rated for a perfect 1/1/1/1 optical clarity. A patent pending adjustable baffling system inside the helmet directs air away from eyes to keep them from getting dry. The PAPR system has a respiratory protection class TH2 (EN 12941).

Proper ventilation may not always be an option in every welding environment. Bring fume protection and filtered air directly to the operator in difficult environments and keep it there all day with the PAPR.

Comfort, Performance and EfficiencyVIKING™ PAPR 3350

123rev.: E-ACC21-EN-25-09-17

124

WELDING HELMETS

VIKING PAPR – PlenumTwo air flow baffles allow users to adjust the air for maximum comfort and prevent drying of the eyes.

First baffle (Red) – controls ratio of air over forehead vs temples Second baffle (Purple) – directs air closer or further from your face

Specifications of VIKING™ PAPR 3350Product Number K3930-2

Size of Blower Assembly (W x T x D) 203 x 191 x 76 mm

Weight of Blower (including battery, belt and filters)

1.0 kg

Air Flow Low Speed: 180+ Ipm (6+ cfm)

High Speed: 210+ Ipm (7.4+ cfm)

Operating Temperature -5° to 55°C

Battery Type Lithium Ion (Rechargeable)

Battery Charge Time Three hours

Battery Charges 500 charges

Belt Size 736 to 1321 mm (max. 1524 mm with belt extension accessory)

Respirator Approval EN12941-1998/A2 2008 – CLASS TH2P

Assigned Protection Factor TH2

Helmet Replacement Battery CR 2450

Battery Life 8 Hours

Charge 220 Volt Input

Alarms Audible and Vibrate

Head Gear FR Flame Retardant

Optical Class 1/1/1/1 (per EN 379)

Lens Switching Speed (sec) 1/25,000

Variable Shade/Control 5-13 Internal

Magnifying “Cheater” Capable Lens Yes

Grind Mode Shade/Control 3.5 Internal

Light Sensitivity Control Continuous

Delay Control Dark to Light (sec) 0.1-1.0 Fully Adjustable

Arc Sensors 4

TIG AMP Rating DC > 2 Amp – AC > 2 Amp

Helmet Compliance CE, ANSI Z87.1-2010, CSA Z94.3

Cartridge Size 133 x 114 mm

View Size 95 x 85mm

Blower Assembly 1 Year Warranty

ADF Helmet 3 Year Warranty

Why VIKING™ PAPR 3350?

» Lightweight and comfortableThe blower weight is 998 g while the entire system weighs in at 2.8 kg, most of which is in the belt pack and hose and away from the head and shoulders. The low-profile blower in the belt unit allows unrestricted movement.

» Lasts all day (and then some)Operators can work a full shift (or more) without interruption.

The PAPR comes with a standard eight-hour battery that outpaces the battery life of competing systems. Audible and vibrating alarms signal when the battery is low.

» Two speeds, consistent deliveryThe PAPR system maintains a positive pressure at two speeds: 180 and 210 liters per minute. The system automatically adjusts fan speeds to keep airflow constant.

9 hrs.

8 hrs.

Battery Run Time

Linc

oln

Elec

tric

Mai

n co

mpe

titor

s

Main competitors

Lincoln Electric VIKING PAPR 3350 Welding Helmet

www.lincolnelectriceurope.comrev.: E-ACC22-EN-25-09-17


WELDING HELMETS

Replacement partsItem Number Description Qty/pk

KP5121-2 VIKING PAPR 3350 Helmet Assembly (PKG includes Headgear and Headcovering) 1

KP2898-1 Outside Cover Lens – 114 x 133 x 1 mm 5

S27978-32 Outside Cover Lens Seal 1

KP3045-3 3350 Auto-Darkening Filter 1

KP3044-1 Inside Cover Lens – 94.7 x 89.7 x 1 mm 25

S27978-33 Lens Holder 1

KP3942-1 Headgear (including plenum and sweatband) 1

KP3943-1 Sweatband 12

KP3940-1 Headcovering (w/hook and loop attachment) 1

KP3944-1 Blower Assembly (PKG includes filter cover assembly) 1

KP3937-1 Battery Pack-Standard 1

KP3424-2 HE Filter Assembly 2

KP3424-6 HE Filter Assembly 6

KP3935-1 Pre-filter 6

KP3936-1 Spark screen 1

KP3932-1 Battery Charger 1

KP5123-1 PAPR Belt Assembly 1

KP5124-1 Shoulder Strap Assembly 1

KP3939-1 Belt Extension (extends belt to 1524mm) 1

KP5122-1 Hose Assembly with Cover 1

KP3046-100 Cheater Lens 1.00 MAG – 51x108 mm FRAME, 1.0 MAG 1







K3096-1 Duffle Bag 1

KP4255-1 European plug adapter 1

What’s Included• Blower Unit

• VIKING 3350 Black Helmet

• Head Cover

• Hose

• 2 Particulate Filters

• 736-1321 mm Padded Belt

• Shoulder Strap

• 220V Battery Charger

• Duffle Bag

• Rechargeable Battery

• Pre-Filter

• Spark Guard

• Hose Cover

• Extra helmet cover lenses: inside 2 pcs, outside 5 pcs

• Instruction Manual

rev.: E-ACC23-EN-25-09-17

STICK WELDERS


WELDING GEAR Lincoln Electric offers personal protection clothing including welding helmets, gloves, jackets. Whether you weld for a living or you’re an occasional welder, we have the right welding safety gear for you.

STICK WELDERS


Together, smooth high dexterity grain leather and durable side split cowhide deliver superior comfort and performance. A lined interior and padded palm maximize comfort. The dual lining system extends life in high wear areas. Kevlar® thread provides heat resistance and added seam strength. Forearm coverage is extended for extra spatter protection. Conforms to EN12477 standards. Size: M, L, XLOrder: K2980-M-CE, K2980-L-CE, K2980-XL-CE

PREMIUM LEATHER MIG/STICK WELDING GLOVES

These general purpose gloves are constructed with heat and flame resistant split cowhide for all types of welding. Inside, the gloves feature a 100% soft sweat absorbent cotton lining for added comfort and heat resistance. Kevlar® stitching and welted seams offer added durability and thumb pads in high wear areas extend the work life of the glove.Conforms to EN12477 standards. Size: One size fits allOrder: K2979-ALL-CE

TRADITIONAL MIG/STICK WELDING GLOVES

Our supple goat skin leather provides the right fit, sensitive feel and durable construction that precise TIG welding demands. The straight thumb design features welted seams and tough Kevlar® stitching to extend service life.Conforms to EN12477 standards. Size: M, L, XLOrder: K2981-M-CE, K2981-L-CE, K2981-XL-CE

LEATHER TIG WELDING GLOVES

For fabrication work or light welding. Top grain cowhide leather delivers excellent fit and dexterity while the goat skin back allows the glove to breathe. The palm is padded for comfort and the hook and loop soft rubber tabbed wrist closure with non-constricting elastic band ensures a snug, comfortable fit.Conforms to EN388 standards.

Size: S, M, L, XL,Order: K2977-S-CE, K2977-M-CE, K2977-L-CE, K2977-XL-CE

FULL LEATHER STEELWORKER® GLOVES

Label Size Hand Size Measurement

S 71/2 190

M 81/2 216

L 9 229

XL 91/2 241

These welding gloves are constructed with heat and flame resistant split leather. Kevlar® stiching extends service life.Conforms to EN12477 standards.

Size: One size fits allOrder: 2105730

MIG/STICK WELDING GLOVES

Hand

Siz

ing

for G

love

sWELDING GEAR Welding Gloves

rev.: E-ACC24-EN-17-10-16


WELDING GEAR Welding Apparel

Choose our full grain leather sleeve model with a flame retardant 100% cotton chest for added comfort and dexterity when MIG or stick welding. The flip up collar is secured with adjustable hook and loop. The front panel is secured by snaps with an extra flap for full closure.Conforms to EN11611 standards.

Order Information

Part Number/Size

ChestMeasurement(cm)

JacketSleeve(cm)

JacketTorso(cm)

K2987-M-CE 113 79 76

K2987-L-CE 123 81 81

K2987-XL-CE 133 84 86

K2987-2XL-CE 144 86 91

K2987-3XL-CE 154 89 96

Order Information

Part Number/Size


JacketSleeve(cm)

JacketTorso(cm)

K2989-M-CE 113 79 76

K2989-L-CE 123 81 81

K2989-XL-CE 133 84 86

K2989-2XL-CE 144 86 91

K2989-3XL-CE 154 89 96

Order Information

Part Number/Size


JacketSleeve(cm)

JacketTorso(cm)

K3106-M-CE 113 79 76

K3106-L-CE 123 81 81

K3106-XL-CE 133 84 86

K3106-2XL-CE 144 86 91

K3106-3XL-CE 154 89 96

Order Information

Part Number/Size


JacketSleeve(cm)

JacketTorso(cm)

K2985-M-CE 113 79 76

K2985-L-CE 123 81 81

K2985-XL-CE 133 84 86

K2985-2XL-CE 144 86 91

K2985-3XL-CE 154 89 96

Our heavy duty side split cowhide leather chest and sleeves provide superior protection for stick welding, while the flame retardant cloth back keeps you cool. As an added measure of spatter protection, the flip up collar is secured by hook and loop while the front jacket closure features a lined flap secured by a series of snaps. An inside pocket protects personal items.Conforms to EN11611 standards.

Split cowhide sleeves resist spatter and add durability, while 9 oz. 100% flame retardant material on the chest and back keep you cool. This basic jacket features an inside pocket and adjustable snap sleeves.Conforms to EN11611 standards.

100% flame retardant material offers protection for light duty welding. An inside pocket stows personal items.Machine washable.Conforms to EN11611 standards.

SHADOW™ GRAIN LEATHER-SLEEVED WELDING JACKET

HEAVY DUTY LEATHER WELDING JACKET

TRADITIONAL SPLIT LEATHER-SLEEVED WELDING JACKET

TRADITIONAL FR CLOTH WELDING JACKET

rev.: E-ACC25-EN-17-10-16



Ideal for instructors, supervisors and occasional welders. The knee length black 255 gr. 100% flame retardant material coat offers protection for light duty welding. Two hip and one chest pocket stow chalk, grease pens or other items.Conforms to EN11611 standards.

Add protection with a 255 gr. 100% flame retardant material black shirt. This shirt features two chest pockets with flaps and a pencil holder slot.

Slip on a pair of welding sleeves for added spatter and heat resistance. These black sleeves are entirely made with cow leather. Elastic cuffsat each end keep spatter out and hold the sleeves in position.Conforms to EN11611 standards.

Sleeve length: 53 cmOrder: K3111-ALL-CE

Let your Lincoln Electric colours show! This premium doo rag, made of 255 gr. flame retardant material, features an athletic mesh lining for fast sweat evaporation. Machine washable.Conforms to EN11611 standards.

Size: One size fits all.Order: K2993-ALL-CE

Protect your head with this authorized Lincoln Electric flame retardant beanie. Machine washable.Conforms to EN11611 standards.


Order Information

Part Number/Size


JacketSleeve(cm)

JacketTorso(cm)

K3112-M-CE 113 79 114

K3112-L-CE 123 81 114

K3112-XL-CE 133 84 114

Order Information

Part Number/Size


JacketSleeve(cm)

JacketTorso(cm)

K3113-M-CE 102-107 79 81

K3113-L-CE 112-117 81 84

K3113-XL-CE 122-127 84 86

K3113-2XL-CE 132-137 86 89

K3113-3XL-CE 142-147 89 91

FR DOO RAG & FR WELDING BEANIE

FR WELDING LAB COAT

BLACK FR SHIRT

Add to your welding jacket when additional protection is required or use for light welding over clothing. The apron features heavy split cowhide and an adjustable harness system for proper fit and weight displacement.Conforms to EN11611 standards.


SPLIT LEATHER WELDING APRON SPLIT LEATHER WELDING SLEEVES

rev.: E-ACC26-EN-17-10-16



Heavy duty leather trousers Made in split cow leather, metal current isolated snaps and FR cotton straps. Conforms to EN11611 standards.

FR trousers Practical and comfortable trousers in cotton with flame retardant finish. Knees protection. Conforms to EN11611 standards.

Order InformationPart Number / Size Lenght (cm)KP10571-M 133KP10571-L 138KP10571-XL 144KP10571-2XL 144KP10571-3XL 148

Order InformationPart Number/Size Lenght (cm)KP10570-M 113KP10570-L 116KP10570-XL 118KP10570-2XL 123KP10570-3XL 126

WELDING GEAR READY-PAK®

Order:K3105-M-CE Traditional Welding Gear READY-PAK® – mediumK3105-L-CE Traditional Welding Gear READY-PAK® – largeK3105-XL-CE Traditional Welding Gear READY-PAK® – extra largeK3105-2XL-CE Traditional Welding Gear READY-PAK® – 2X large

• Lincoln® Industrial Duffle Bag • VIKING™ Black 1840 Series Auto-Darkening Helmet• Traditional FR Cloth Jacket (K2985)• Traditional MIG/Stick Welding Gloves• Full Leather Steelworker® Gloves• FR Doo Rag

LEATHER TROUSERS & FR TROUSERS

Everything a welding student or occasional welder needs to get startedGet a tough, abrasion resistant duffle bag filled with everything a welding student or occasional welder needs to get started in school or on the job.Conforms to EN11611, EN379, EN388, EN12477 standards.

rev.: E-ACC27-EN-25-09-17

WELDING ACCESSORIES


HYDROGUARD™ ROD OVENS

Key Options • K3148-1 Thermometer Kit – allows monitoring of actual temperature ranging from 38-260°C. Certified accurate to ±12°C.

OUTPUTINPUT


Product Item Number

Primary Voltage (50-60Hz) Capacity Chamber

Size Insulation Temperature Range Heating Element


Net Weight (kg)

HydroGuard™Bench 350Rod Oven

K2942-1 115/120 V/1Ph 159 kgup to 450 mm electrode

Dia. / Depth457 x 483 mm

5 cm Fiberglass

38-288°CThermostat control with indicator light±14°C

Two elements:1000 W total

749 x 572 x 572 41K2942-2* 240/480 V/1Ph

Features• Distributes heat evenly throughout the interior and directs moisture

to the adjustable vent at the top of the door.• Regulate temperature from 38-288º C. Pilot light indicates active heating mode.

Housing recesses controls for added protection.• Remove shelves to use rod oven for pre- or post-weld heating of welded parts.• Regulate interior moisture levels through an adjustable vent on the door.• A horizontal surface added to the top provides a surface for taking notes,

storing documentation or necessary tools.• Records time and temperature to comply with certain code requirements.

Hydroguard™ Bench Rod OvensHydroGuard™ Rod Ovens help protect stick electrodes from moisture pickup, a major contributor to weld cracking and porosity.

The Bench model holds up 159 kg of stick up to 450 mm in length, enough for multiple operators in almost any fabrication shop.

Outstanding moisture resistance

Removable Shelves – for pre- or post-weld heating of welded parts or MIG wire on metal spools.

Top mounted shelf – take notes, store documents.

Adjustable thermostat– 38-288°C range,– pilot confirms when heating

elements is on,– recessed controls.

Moisture Vent – allows hot, moist air to escape from the chamber.

* K2942-2 240/480 volt model is shipped without plug

Thermometer kit

rev.: E-ACC28-EN-17-10-16

STICK WELDERS


Thermometer kit

HYDROGUARD™ ROD OVENS

OUTPUTINPUT


Product Item Number

Primary Voltage (50-60Hz) Capacity Chamber

Size Insulation Temperature Range

Heating Element


Net Weight (kg)

HydroGuard™Portable Rod Oven

K2939-1 115/120 V/1Ph4.5 kgup to 450 mm electrode

Dia. / Depth7.3 x 50 cm

3.8 cm Fiberglass

Preset at 149º CMinimum ambient operating temperature is 0º C to maintain a rod oven chamber temperature of 120º C

75 Watt Wire Wrapped 518 x 386 x 630 4.8

K2939-2 230 V/1Ph

Features• Easy to transport to the job site.• Makes it easy to extract your stick electrode.• Preset 149°C temperature.• Visually confirms operation.• Removable, one-piece carrying handle.• Efficiently maintains temperatures.• Tough powder coat finish.• Durable steel construction.

Outstanding moisture resistance for improved weld quality

Hydroguard™ Portable Rod Ovens

HydroGuard™ Portable Rod Ovens from Lincoln Electric help you protect your stick electrodes from moisture pickup, a major contributor to weld cracking and porosity.

Protect your rods and drive moisture away. Your welds depend on it.

Rod Elevator makes it easy to extract your stick electrode.

Substantial insulation layer efficiently maintains temperature.

Removable, one-piece carrying handle.

Power On indicator light visually confirms operation.

rev.: E-ACC29-EN-17-10-16

STICK WELDERS


OTHER ACCESSORIES Electrode Holders & Ground Clamps

GC1 150 / 200 / 300 / 600

GC3 200 / 300 / 500

EH3 200 / 300 / 400

GC2 250 / 350 / 600

GC4 600 – GC5 600 / 800 / 600R

EH1 300 / 500 – EH2 300 / 500

EH4 300

Clamp Item number DC@35% DC@60% Cable Size

(mm²)Weight

(g) Norm

GC1-150 KP10580-1 150 100 10-16 180

EN60974-13GC1-200 KP10580-2 200 150 16-25 190

GC1-300 KP10580-3 300 250 35-50 205

GC1-600 KP10580-4 600 500 95-120 430


(mm²)Weight

(g) Norm

GC4-600 KP10583-1 600 500 95-120 865

EN60974-13GC5-600 KP10584-1 600 500 70-95 370

GC5-800 KP10584-2 800 600 95-120 1650

GC5-600R KP10584-3 600 500 95-120 935


(mm²)Weight

(g) Norm

GC2-250 KP10581-1 250 200 25-35 215

EN60974-13GC2-350 KP10581-2 300 250 50-70 305

GC2-600 KP10581-3 600 500 95-120 570


(mm²)Weight

(g) Norm

GC3-200 KP10582-1 200 150 25-35 190

EN60974-13GC3-300 KP10582-2 300 250 50-70 350

GC3-500 KP10582-3 500 400 70-95 550

GC1 300

GC5 800

EH2 300

GC1 200

GC5 600

EH1 500

GC1 150

GC4 600

EH1 300

EH4 300

GC2 250

GC3 200

EH3 200

GC2 350

GC3 300

EH3 300

GC2 600

GC3 500

EH3 400

GC1 600

GC5 600R (rotating)

EH2 500

Electrode Holder

Item number DC@35% DC@60% Max.

electrodeCable Size

(mm²)Weight

(g) Norm

EH3-200 KP10577-1 200 150 2.5-4 25-35 335

EN60974-11EH3-300 KP10578-1 300 250 4-6.3 50-70 365

EH3-400 KP10578-2 400 300 5-8 70-95 490

Electrode Holder


electrodeCable Size

(mm²)Weight

(g) Norm

EH1-300 KP10575-1 300 200 4-6.3 50-70 470

EN60974-11EH1-500 KP10575-2 500 400 6.3-10 95-120 600

EH2-300 KP10576-1 300 200 4-6.3 50-70 430

EH2-500 KP10576-2 500 400 6.3-10 95-120 580

Electrode Holder


electrodeCable Size

(mm²)Weight

(g) Norm

EH4-300 KP10579-1 300 250 4-6.3 50-70 495 EN60974-11

rev.: E-ACC30-EN-18-10-17

STICK WELDERS


OTHER ACCESSORIES

Inve

rtec

® V

205-

S 2V

Inve

rtec

® V

270-

S 2V

Inve

rtec

® 27

0SX

Inve

rtec

® 40

0SX

Inve

rtec

® V2

05-T

P-2V

Inve

rtec

® V2

70-T

Inve

rtec

® V2

70-T

P

Inve

rtec

® V2

70-T

P 2V

Inve

rtec

® 30

0TPX

Inve

rtec

® 40

0TPX

Aspe

ct 30

0®

Spee

dtec

® 18

0C/2

00C

Spee

dtec

® 40

5S

Spee

dtec

® 50

5S

Flex

tec®

350X

Flex

tec®

650

X

Spee

dtec

® 40

5SP

Spee

dtec

® 50

5SP

Pow

er W

ave®

C30

0

Pow

er W

ave®

S35

0

Pow

er W

ave®

S50

0

Pow

er F

eed®

41,

42, 4

4, 4

6

Vant

age®

410

CE

Vant

age®

500

CE

Inve

rtec

® PC

-210

Tom

ahaw

k® 10

25

K2694-1 • •K14096-1 • • • •W0200002 • • • • • • • •K14085-1 • •K14087-1 •K14141-1 • • • •K14114-1 • •K14129-1 • •K14115-1 • •K14127-1 • • • • •K14128-1 • • • • •K3059-4 • • • •K2636-1 • •K2641-1 • •

K14096-1 K14087-1 K14085-1 K14129-1 K14114-1 K14141-1

K14127-1

Undercarriage with gas cylinder platform, delivered as a kit.For: Speedtec 405/505S & SP

Undercarriage with gas cylinder platform, delivered as a kit. For: Power Wave C300

Undercarriage with gas cylinder platform, delivered as a kit. For: Power Wave S350 & S500

Undercarriage with gas cylinder platform, delivered as a kit. For: Invertec 400TPX and Aspect 300

Undercarriage with gas cylinder platform, delivered as a kit. For: Invertec 300TPX and Speedtec 180C/200C

Undercarriage with gas cylinder platform, delivered as a kit.Enables installation of two PF4x feeders. For: Speedtec 405/505S & SP

4-wheeled undercarriage for wire feeders. For: Power Feed 4x

Carts & Undercarriages Overview

K2694-1 W0200002 K3059-4 K2636-1 K2641-1

4-wheeled undercarriage with gas cylinder platform delivered as a kit. For: Invertec 400SX

2-wheeled cart, delivered as a kit. For: Invertec V205-TP and V270-TP

Rear-wheeled cart with front casters, single gas bottle platform and convenient handles. Small footprint fits through 762 mm door. Enables installation of two PF-4x feeders.For: PW S350/S500 and Flextec 350X/650X

Medium Two Wheel Trailer. For heavy duty road, off-road, plant and yard use.For: Vantage

Four-Wheeled Steerable Yard Trailer. For off-road, plant and yard use. Includes an automatically engaging drawbar lock.For: Vantage

Carts & Undercarriages

rev.: E-ACC31-EN-30-10-17


Recommended Current (A)

Cable size (mm²)

Cable length (m)

Electrode Holder

Ground Clamp ITEM NUMBER

200 25 3 X E/H-200A-25-3M

400 70 10 X E/H-400A-70-10M

400 70 5 X E/H-400A-70-5M

200 35 5 X GRD-200A-35-5M

200 35 10 X GRD-200A-35-10M

300 50 5 X GRD-300A-50-5M

300 50 10 X GRD-300A-50-10M

400 70 10 X GRD-400A-70-10M

400 70 15 X GRD-400A-70-15M

600 95 10 X GRD-600A-95-10M

120 10 5 X X KIT-120A-10-5M

140 16 3 X X KIT-140A-16-3M

140 25 5 X X KIT-140A-25-5M

200 25 3 X X KIT-200A-25-3M

200 35 5 X X KIT-200A-35-5M

250 25 3 X X KIT-250A-25-3M

250 35 5 X X KIT-250A-35-5M

300 50 5 X X KIT-300A-50-5M

400 70 5 X X KIT-400A-70-5M

Lincoln antispatter spray is formulated to avoid the adhesion of fused metal on the pieces to be weld or on the nozzle of the torch.

Ecological

CFC Free

Water based

ANTISPATTER SPRAY PR ACTICAL• Ready to use (it’s a spray can)• No silicone to be removed (but the antispatter features are the same as a silicone spray)

• No need to clean it before painting

SAFE• Not flammable• Clorinathed solvent free• Not toxic; not harmful; not irritant• No need to clean it before painting

• Packaging: can 400 ml• Conditioning: 12 cans/box

Linc Spray Eco

Antispatter spray – Western Europe

Item n°: KP 10565-W

• Packaging: can 400 ml• Conditioning: 12 cans/box

Linc Spray Eco

Antispatter spray – Eastern Europe

Item n°: KP 10565-E

Chemicals

OTHER ACCESSORIES

LINC SPRAY ECO

Special anti-corrosive fluid for cooling systems of welding machines.

ACOROX COOLANT

FEATURES• Effective to -26°C• Do not dilute

• Packaging: can 5 liters• Conditioning: 2 cans/box

Item n°: K10420-1

ACOROX COOLANT

Welding Kits

WELDING KITS

rev.: E-ACC32-EN-17-10-16


OTHER ACCESSORIES Welding Kits

Top Features• Handy toothbrush style• Light cleaning on stainless steel• For confined or hard to reach areas• Length: 20 cm• Brush dim: 8x40 mm

Process: Stainless Steel & Titanium Welding

Stainless steel Welding Wire Brush3 x 7 Row

Item n°: KH580

Top Features• Tempered steel bristles• Make fast work of rust, mill scale and paint

• Length: 24 cm• Brush dim: 20x125 mm

Process: Carbon Steel Welding

Carbon Steel Welding Wire Brush4 x 16 Row

Item n°: KH585

Top Features• Slight curve in the handle improves grip

• General light cleaning on stainless steel



Stainless Steel Welding Wire Brush2 x 9 Row

Item n°: KH581

Top Features• General purpose• Long life• Efficient surface cleaning• Length: 35 cm• Brush dim: 18x163 mm


Stainless Steel Welding Wire Brush3 x 19 Row

Item n°: KH586

Top Features• Compact toothbrush style• Light cleaning on aluminium• For confined or hard to reach areas• Brass bristles are easy on aluminium surfaces


Process: Aluminium Welding

Brass Welding Wire Brush3 x 7 Row

Item n°: KH582 Top Features• Compact toothbrush style set• Easy to stow in your bag• Perfect for small projects• Includes:

– brass bristle brush for aluminium, – stainless bristle brush for

stainless steel– a nylon bristle brush



Welding Brush Three PackItem n°: KH590

Top Features• Curved handle improves grip• General light cleaning on aluminium• Brass bristles gently remove oxide layer on aluminium


Process: Aluminium Welding

Brass Welding Wire Brush2 x 9 Row

Item n°: KH583

Top Features• Shock reducing spring-type handle• For cleaning flux and slag off metal• Tough, forged-alloy steel head with vertical chisel on one hand, long tapered point on other

• Length: 24 cm• Weight: 315 g

Chipping HammerItem n°: KP 10587-1

Top Features• Tempered steel bristle pattern• Efficient general cleaning• Length: 35 cm• Brush dim: 18x163 mm


Carbon Steel Welding Wire Brush3 x 19 Row

Item n°: KH58 4

Inspection MirrorItem n°: KP 10587-2

PLIERS

FIX CO2 Plierssize 1, for gas nozzles 12-15mmItem n°: KP10520-1

size 2, for gas nozzles 15-18mmItem n°: KP10520-2

BRUSHES

rev.: E-ACC33-EN-17-10-16


GAS REGUL ATORS

LE601D-L LE250LFlowgauge regulator

for light duty MIG/TIG application

Flowgauge regulator for all MIG /TIG application

MAX INLET PRESSURE (bar) 230 230

FLOW (lpm) 0-30 0-30

SUPPLY PRESSURE GAUGE (bar) 0-315 0-315

FLOW GAUGE (lpm) 0-30 0-30

DELIVERY PRESSURE (bar) ----- -----

Mainly used in

Cylinder connection thread

Outlet connection Hose connection Part Number Description Part Number Description

GERMANYAr – Ar mix

W21,8-14-RH G1/4'' without 3100481 LE601D30LARC117 3100521 LE250DB30LARC22CD

BELGIUMAr – Ar mix

W21,8-14-RH G3/8'' for 6 and 8 mm hoses 3100486 LE601D30LARC938 3100382 LE250DB30LARC25CD

NETHERLANDSAr – Ar mix W24,32-14-RH

G3/8'' for 6 and 8 mm hoses3100088 LE601D30LAR3124 3100520 LE250DB30LAR3132

CD W21,8-14-RH 3100487 LE601D30LCD3562 3100525 LE250DB30LCD106

ITALYAr – Ar mix W24,51-14-RH



SPAINAr – Ar mix

W21,8-14-RH G1/4'' for 5mm hose 3100491* LE601ED30LARC98 3100516 LE25030LARC575CD

PORTUGALAr – Ar mix

W21,7-14-RH G1/4'' for 6 and 8 mm hoses 3100257* LE601ED30LARC93 3100047 LE25030LARC3001CD

FRANCEAr – Ar mix

W21,8-14-RH 9/16'' UNF for 6 mm hose 3100485 LE601D30LARC500 3100523 LE250DB30LARC643CD

SWEDENAr – Ar mix W24,32-14-RH



NORWAYAr – Ar mix W24,32-14-RH



FINLANDAr – Ar mix W24,32-14-RH



DENMARKAr – Ar mix W24,32-14-RH



RUSSIAAr – Ar mix

G3/4"-RH G1/4'' for 6 mm hose 3100482 LE601D30LARC168 3100415 LE250DB30LARC46CD

CROATIAAr – Ar mix


CZECH REPUBLIC

Ar – Ar mix W24,32-14-RHG1/4'' for 6 mm hose

3100480 LE601D30LAR3589 3100518 LE250DB30LAR109


SLOVENIAAr – Ar mix


ESTONIA LITHUANIA

LATVIA

Ar – Ar mix (Scandinavian type) W24,32-14-RH

G3/8'' for 6 and 8 mm hoses

3100478 LE601D30LAR3579 3100519 LE250DB30LAR275

CD (Scandinavian type) W21,8-14-RH 3100479 LE601D30LCD3582 3100528 LE250DB30LCD17

Ar – CD (Russian type) G3/4"-RH 3100484 LE601D30LARC363 3100524 LE250DB30LARC69

Gas Regulators Lincoln Branded

* side inlet connection

rev.: E-ACC34-EN-17-10-16


GAS REGUL ATORS

LE601D-L LE250LFlowgauge regulator

for light duty MIG/TIG application

Flowgauge regulator for all MIG /TIG application

MAX INLET PRESSURE (bar) 230 230

FLOW (lpm) 0-30 0-30

SUPPLY PRESSURE GAUGE (bar) 0-315 0-315

FLOW GAUGE (lpm) 0-30 0-30

DELIVERY PRESSURE (bar) ----- -----

Mainly used in

Cylinder connection thread

Outlet connection Hose connection Part Number Description Part Number Description

GERMANYAr – Ar mix


BELGIUMAr – Ar mix

W21,8-14-RH G3/8'' for 6 and 8 mm hoses 3100486 LE601D30LARC938 3100382 LE250DB30LARC25CD

NETHERLANDSAr – Ar mix W24,32-14-RH



ITALYAr – Ar mix W24,51-14-RH



SPAINAr – Ar mix

W21,8-14-RH G1/4'' for 5mm hose 3100491* LE601ED30LARC98 3100516 LE25030LARC575CD

PORTUGALAr – Ar mix

W21,7-14-RH G1/4'' for 6 and 8 mm hoses 3100257* LE601ED30LARC93 3100047 LE25030LARC3001CD

FRANCEAr – Ar mix

W21,8-14-RH 9/16'' UNF for 6 mm hose 3100485 LE601D30LARC500 3100523 LE250DB30LARC643CD

SWEDENAr – Ar mix W24,32-14-RH



NORWAYAr – Ar mix W24,32-14-RH



FINLANDAr – Ar mix W24,32-14-RH



DENMARKAr – Ar mix W24,32-14-RH



RUSSIAAr – Ar mix

G3/4"-RH G1/4'' for 6 mm hose 3100482 LE601D30LARC168 3100415 LE250DB30LARC46CD

CROATIAAr – Ar mix


CZECH REPUBLIC

Ar – Ar mix W24,32-14-RHG1/4'' for 6 mm hose

3100480 LE601D30LAR3589 3100518 LE250DB30LAR109


SLOVENIAAr – Ar mix


ESTONIA LITHUANIA

LATVIA

Ar – Ar mix (Scandinavian type) W24,32-14-RH

G3/8'' for 6 and 8 mm hoses

3100478 LE601D30LAR3579 3100519 LE250DB30LAR275

CD (Scandinavian type) W21,8-14-RH 3100479 LE601D30LCD3582 3100528 LE250DB30LCD17

Ar – CD (Russian type) G3/4"-RH 3100484 LE601D30LARC363 3100524 LE250DB30LARC69

LE250D-F LE651 LE603 LE711Flowmeter regulator

for MIG /TIG application, accurate flow measurement

Flowmeter regulator with gas saving feature

Inert gas guard

Flowgauge regulator (electrically heated)

230 300 15 2300-30 0-30 ----- 0-250-315 0-400 ----- 0-3150-30 0-30 ----- 0-25----- ----- 0.6-0.9 -----

Part Number Description Part Number Description Part Number Description Part Number Description

3100538 LE250DB30FARC55 3100704 LE65130LARC3564 3001051 LE603Z0033100624 LE711Z002


3100532 LE250DB30FAR3130 3100709 LE65130LAR3568 3002150 LE603Z0013100540 LE250DB30FCD107 3100712 LE65130LCD3569 3100623 LE711Z0013100530 LE250DB30FAR120 3100701 LE65130LAR3574

3002150 LE603Z0013100541 LE250DB30FCD121 3100713 LE65130LCD3575 3100625 LE711Z003

3100529 LE250D30FARC734 3100706 LE65130LARC3576 3001051 LE603Z0033100626 LE711Z004

3100029 LE250D30FARC103 3100707 LE65130LARC3577 3001051 LE603Z0033100627 LE711Z005


3100533 LE250DB30FAR50 3100702 LE65130LAR35813002150 LE603Z001

3100542 LE250DB30FCD175 3100714 LE65130LCD3584 3100629 LE711Z0073100533 LE250DB30FAR50 3100702 LE65130LAR3581

3002150 LE603Z0013100542 LE250DB30FCD175 3100714 LE65130LCD3584 3100629 LE711Z0073100533 LE250DB30FAR50 3100702 LE65130LAR3581

3002150 LE603Z0013100542 LE250DB30FCD175 3100714 LE65130LCD3584 3100629 LE711Z0073100533 LE250DB30FAR50 3100702 LE65130LAR3581

3002150 LE603Z0013100542 LE250DB30FCD175 3100714 LE65130LCD3584 3100629 LE711Z007



3100531 LE250DB30FAR301 3100703 LE65130LAR35933001051 LE603Z003

3100543 LE250DB30FCD302 3100715 LE65130LCD3594 3100630 LE711Z008


3100533 LE250DB30FAR50 3100702 LE65130LAR3581 3002150 LE603Z001

3100542 LE250DB30FCD175 3100714 LE65130LCD3584 3002150 LE603Z001 3100629 LE711Z007

3100539 LE250DB30FARC87 3100711 LE65130LARC3618 3002150 LE603Z001 3100632 LE711Z010

rev.: E-ACC35-EN-17-10-16


GAS REGUL ATORS

Features• Maximun inlet pressure 230 bar• 50 mm safety gauge• Rear inlet connection (side inlet connection for Spain and Portugal)

Compact single stage flowgauge regulator Applications • Light duty MIG/TIG welding

Features• Forged brass body for maximum strength• Maximum inlet pressure 230 bar

Flowgauge regulatorApplications • All MIG/TIG welding applications


Flowgauge regulator Applications • All MIG/TIG welding applications


Electrically heated flowgauge regulatorApplications • All MIG/TIG welding applications

Features• Forged Two Stage flowmeter regulator• Forged brass body for maximum

strength• Cylinder gas supplied• Inlet filter to protect against

contamination

• Precise gas flow control• Strong, resistant with good 360°

visibility flowmeter made of polycarbonate

• Side entry

Two stage flowmeter regulator Applications • All MIG/TIG welding applications

Features• To be connected between your existing

flowmeter and hose.

• LE603 Inert Gas Guard is designed to save shielding gases in two ways:

- by reducing the gas surge when a MIG gun or TIG torch is activated. As they are designed to reduce the pressure held in supply hose, gas waste is reduced when the gun or torch is triggered

- by delivering a controlled flow rate

• Operators will typically set shielding gas flow rates higher than necessary for a welding operation. Once set by a supervisor, the Inert Gas Guard delivers the precise amount of flow for the operation, eliminating the needless waste of gas.

• Designed to eliminate the pressure surge at the beginning of each weld in MIG/ TIG welding, maintains a constant flow and pressure with each weld, permits gas savings over 60%.

LE601D-L

LE250L

LE250D-F

LE711

LE651

Inert gas guard Applications • All MIG/TIG welding applications

LE603

rev.: E-ACC36-EN-17-10-16

YOU A R E HERE

CrossLinc Technology™, now inside the New Flextec® 350X welders and LN-25X feeder

LN-25X Flextec® 350X

YOUR

W

ELDER I S DOWN HERE

Now the Two of You Can Talk. More Control. Fewer Cables.

EN 12/17www.lincolnelectriceurope.com

CUSTOMER ASSISTANCE POLICY

The business of Lincoln Electric Europe is manufacturing and selling high quality welding equipment, consumables and cutting equipment. Our challenge is to meet the needs of the customer and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice and assumes no responsibility, with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products. Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.

Subject to change – this information is accurate to the best of our knowledge at the time of printing.

equipment catalogue europe

Documents