hospital equipment catalogue

Equipment

Hospital

Distributed By MODIEZHAM

Modiezham Sdn Bhd Tel : 03 4280 2505 / 4505

[email protected]

www.mod

iezha

m.com

- Hydraulic (Germany) height adjustable from 450mm to 800mm. - Gas spring (Germany) backrest adjustment. - Gas spring (Germany) knee bend adjustment. - Frame: Tubular mild steel. - Mattress base: 1.2mm steel sheet with ventilation holes. - Finishing: Epoxy powder coated. - Headend and footend panels made of formed ABS/polymerised materials, detachable and interchangable. - Castors: 4 x 125mm ball bearing, non-marking grey rubber, diagonal 2 with double brakes (static and directional). - Mattress base: 1905mm (L) x 915mm (W). - Overall size: 2140mm (L) x 1000mm(W). - Standard Accessories (a) 1 unit stainless steel, double-hooked IV drip pole, height adjustable with receiving sockets at both headend corners. (b) 4 units revolving, non-marking, grey rubber bumper at 4 corners. Optional Accessories (a) 1 pair of telescopic safety siderails (Model 151-B). (b) 1 piece of hospital B.S. latex mattress with sanitised vinyl PVC zip cover (Model 105-M-A).

Hospital Beds100-A-1Product type: HI-LO4-Section/Double Fowler Positions

1


[email protected]

www.mod

iezha

m.com

- Mechanical cranking height adjustment from 450mm to 800mm. - Frame: Tubular mild steel. - Mattress base: 1.2mm-thick steel sheet with ventilation holes. - Finishing: Epoxy powder coated. - Headend and footend panels made of tubular steel frame with laminated �breboard, detachable and interchangable. - 3 independent cranking mechanisms for HI-LO positions, backrest adjustment, and knee bend adjustment. - Castors: 4 x 125mm ball bearing, grey rubber, diagonal 2 with double brakes (static and directional). - Mattress base: 1905mm(L) x 915mm(W). - Overall size: 2140mm(L) x 1000mm(W). - A stainless steel double-hooked IV drip pole with receiving sockets in both headend corners. - Optional Accessories (a) 1 pair telescopic safety siderails (Model VS 151-B). (b) 1 piece of hospital B.S. latex mattress with sanitised PVC zip cover (Model 105-M-A).

100-A-2Product type: HI-LO4-Section/Double Fowler Positions

Hospital Beds

2


[email protected]

www.mod

iezha

m.com

- Hydraulic (Germany) height adjustable from 450mm to 800mm. - Gas spring (Germany) backrest adjustment. - Frame: Tubular mild steel. - Mattress base: 1.2mm steel steel sheet with ventilation holes. - Finishing: Epoxy powder coated. - Headend and footend panels made of formed ABS/polymerised materials, detachable and interchangable. - Castors: 4 x 125mm ball bearing, non-marking grey rubber, diagonal 2 with double brakes (static and directional). - Mattress base: 1905mm(L) x 915mm(W). - Overall size: 2140mm(L) x 1000mm(W). - Standard accessories (a) 1 unit stainless steel double-hooked IV pole, height adjustable with receiving sockets in both headend corners. (b) 4 units revolving non-marking, grey rubber bumper in 4 corners. - Optional accessories (a) 1 pair of telescopic safety (Model VS 151-B). (b) 1 piece of hospital B.S. latex mattress with sanitised vinyl PVC zip cover (Model VS 105-M-A).

100-B-1Product type: HI-LO2-Section/Single Fowler Position

Hospital Beds

3


[email protected]

www.mod

iezha

m.com

Mechanical cranking height adjustment from 450mm to 800mm. Frame: Tubular mild steel. Mattress base: 1.2mm-thick steel sheet with ventilation holes. Finishing: Epoxy powder coated. Headend and footend panels made of tubular steel with laminated �breboard, detachable and interchangable. 2 independent cranking mechanism for HI-LO positions and backrest adjustment. Castors: 4 x 125mm ball bearing, grey rubber, diagonal 2 with double brakes (static and directional). Mattress base: 1905mm(L) x 915mm(W). Overall size: 2140mm(L) x 1000mm(W). A stainless steel double-hooked IV drip pole with receiving sockets in both headend corners. Optional Accessories (a) 1 pair of telescopic safety siderails (Model VS 151-B). (b) 1 piece of hospital B.S. latex mattress with

Hospital Beds100-B-2Product type: HI-LO2 Section/Single Fowler Position

4


[email protected]

www.mod

iezha

m.com

Hospital Beds

- Mechanical cranking height adjustment from 450mm to 800mm. - Frame: Tubular mild steel. - Mattress base: 1.2mm-thick steel sheet with ventilation holes. - Finishing: Epoxy powder coated. - Headend and footend panels made of formed ABS/polymerised material, detachable and interchangable. - 2 independent cranking mechanism for HI-LO positions and backrest adjustment. - Castors: 4 x 125mm ball bearing, grey rubber, diagonal 2 with double brakes (static and directional). - Mattress base: 1905mm(L) x 915mm(W). - Overall size: 2140mm(L) x 1000mm(W). - A stainless steel double-hooked IV drip pole with receiving sockets in both headend corners. - Optional Accessories (a) 1 pair of telescopic safety siderails (Model VS 151-B). (b) 1 piece of hospital B.S. latex mattress with sanitised PVC zip cover (Model VS 105-M-A).

100-B-2/ABSProduct type: HI-LO2 Section/Single Fowler Position

5


[email protected]

www.mod

iezha

m.com

- Height �xed at 550mm. - Gas spring-assisted backrest and kneebend positions adjustment. - Frame: Tubular mild steel. - Mattress base: 1.2mm steel sheet with ventilation holes. - Finishing: Epoxy powder coated. - Headend and footend panels made of tubular steel frame and laminated �breboard, detachable and interchangable. - Castors: 4 x 100mm grey rubber, diagonal 2 with brakes. - Mattress base: 1905mm(L) x 915mm(W). - A stainless steel, double-hooked IV drip pole with receiving sockets in headend corners. Optional Accessories (a) 1 pair of telescopic safety siderails (Model VS 151-B). (b) 1 piece of B.S. latex mattress with sanitised PVC zip cover (Model VS 105-M-A).

Hospital Beds100-C-1Product type: Fixed Height4-Section/Double Fowler Positions

6


[email protected]

www.mod

iezha

m.com

- Height �xed at 550mm. - Gas spring-assisted backrest adjustment. - Frame: Tubular mild steel. - Mattress base: 1.2mm steel sheet with ventilation holes. - Finishing: Epoxy powder coated. - Headend and footend panels made of tubular steel frame with laminated �breboards, detachable and interchangable. - Castors: 4 x 100mm grey rubber, diagonal 2 with brakes. - Mattress base: 1905mm(L) x 915mm(W). - Stainless steel, double-hooked IV drip pole with receiving sockets in headend corners. - Optional Accessories (a) 1 pair of telescopic safety siderails (Model VS 151-B). (b) 1 piece of hospital B.S. latex mattress with sanitised PVC zip cover (Model VS 105-M-A).

100-C-2Product type: Fixed Height2-Section/Single Fowler Position

Hospital Beds

7


[email protected]

www.mod

iezha

m.com

Hospital Beds100-E/2012Product type: HI-LO, ElectricalElectrical HI-LO Hospital Bed

- Bed frame: constructed of mild steel. - Finishing: epoxy powder-coated. - Bed surface: formed ABS/polymerised material. - Bed head and footend panel: (a) Formed ABS/polymerised material. (b) Detachable and interchangable. - Features: (a) HI-LO positions from 450mm to 800mm, motorised actuators. (b) Head section/backrest adjus table to 85-degree inclination, motorised actuators. (c) Foot section/knee bend position adjustable to 40-degree inclination, motorised actuators. (d) Forward & reverse trendelenburg position adjustable to ± 15 Degrees inclination by motorised actuators. (e) Handset: remote control of various positions adjustment. - Standard Accessories: (a) 1 Pair: Model no. VS 151-C. Aluminium safety siderails fold down with self locking mechanism. (b) 1 No: Stainless steel double Hook IV Pole. (c) CCastors: 4 x 125mm ball bearing Nylon castors with central locking mechanism. (d) Dimension Overall: 2160mm(L) x 1000mm(W) x 460/720mm. (e) Mattress base: 1905mm(L) x 900mm(W).

8


[email protected]

www.mod

iezha

m.com

- Bed frame: constructed of mild steel. - Finishing: epoxy powder-coated. - Bed surface: formed ABS/polymerised material. - Bed head and footend panel: (a) Formed ABS/polymerised material. (b) Detachable and interchangable. - Features: (a) HI-LO positions from 450mm to 800mm, motorised actuators. (b) Head section/backrest adjus table to 85-degree inclination, motorised actuators. (c) Foot section/knee bend position adjustable to 40-degree inclination, motorised actuators (Germany). (d) Handset: remote control of various positions adjustment. - Standard Accessories: (a) Aluminium side rails (fold-down version) (model no. VS 151-C). (b) One-piece B.S. latex mattress c/w sanitised, water and urine repellant and �re retartant Vinyl PVC zip bag cover (model no.VS 105-M-A). (c) Castors: 4 x 125mm ball bearing Nylon castors, diagonal 2 with brakes. (e) Mattress base size: 1905mm(L) x 915mm(W). (d) Overall size: 2150mm(L) x 1000mm(W).

Hospital Beds100-E/HOMEDProduct type: HI-LO, ElectricalElectrical HI-LO Hospital Bed

9


[email protected]

www.mod

iezha

m.com

Hospital Beds

- 4-section, double-fowler mattress base. Frame: Tubular mild steel. - Mattress base: 1.2mm-thick steel sheet with ventilation holes. - Finishing: Epoxy powder coated. - Headend and footend panels made of tubular steel frame with laminated �breboards, detachable and interchangable. - 2 independent cranking mechanisms for backrest adjustment and kneebend adjustment. - Cranking handles located at footend of bed. - Castors: 4 x 100mm grey rubber, diagonal 2 with brakes. - Size of mattress base: 1905mm(L) x 915mm(W). - Height to mattress base: 550mm.

101-AProduct type: Fixed HeightDouble Fowler Position Hospital Bedstead

10


[email protected]

www.mod

iezha

m.com

Hospital Beds

- 4-section, double-fowler mattress base. Frame: Tubular mild steel. - Mattress base: 1.2mm-thick steel sheet with ventilation holes. Finishing: Epoxy powder coated. - Headend and footend panels made of tubular steel frame with laminated �breboards, detachable and interchangable. - 2 independent cranking mechanisms for backrest adjustment and kneebend adjustment. Cranking handles located at footend of bed. - Castors: 4 x 100mm grey rubber, diagonal 2 with brakes. - Size of mattress base: 1905mm(L) x 915mm(W). - Height to mattress base: 550mm.

101-AProduct type: Fixed HeightDouble Fowler Position Hospital Bedstead

11


[email protected]

www.mod

iezha

m.com

Hospital Beds

- 4-section, double fowler mattress base. - Frame: Tubular mild steel. - Mattress base: 1.2mm-thick steel sheet with ventilation holes. - Finishing: Epoxy powder coated. - 2 independent cranking mechanisms for backrest adjustment and kneebend adjustment. - Cranking handles located at footend of bed. - Castors: 4 x 100mm, grey rubber, diagonal 2 with brakes. - Size of mattress base: 1905mm(L) x 915mm(W). - Height to mattress base: 550mm.

101-BProduct type: Fixed HeightDouble Fowler Position Hospital Bedstead (Steel Head & Leg Frames)

12


[email protected]

www.mod

iezha

m.com

- 2-section/single fowler mattress base. - Frame: Tubular mild steel. - Mattress base: 1.2mm-thick steel sheet with ventilation holes. - Finishing: Epoxy powder coated. - Headend and footend panels made of tubular steel frame with laminated �breboards, - detachable and interchangable. - Mechanical cranking mechanism for backrest adjustment. - Cranking handle located at footend of bed. - Castors: 4 x 100mm grey rubber, diagonal 2 with brakes. - Mattress base size: 1905mm(L) x 915mm(W). - Height to mattress base: 550mm.

Hospital Beds102-AProduct type: Fixed HeightSingle Fowler Position Hospital Bedstead

13


[email protected]

www.mod

iezha

m.com

Hospital Beds

- 2-section/single fowler mattress base. - Frame: Tubular mild steel. - Mattress base: 1.2mm-thick steel sheet with ventilation holes. - Finishing: Epoxy powder coated. - Headend and footend panels made of formed ABS/polymerised material, detachable and interchangable. - Mechanical cranking mechanism for backrest adjustment. - Cranking handle located at footend of bed. - Castors: 4 x 100mm grey rubber, diagonal 2 with brakes. - Mattress base size: 1905mm(L) x 915mm(W). - Height to mattress base: 550mm.

102-A/ABSProduct type: Fixed HeightSingle Fowler Position Hospital Bedstead

14


[email protected]

www.mod

iezha

m.com

- 2-section/single fowler mattress base. - Frame: Tubular mild steel. - Mattress base: 1.2mm-thick steel sheet with ventilation holes. - Finishing: Epoxy powder coated. - Headend and footend panels made of tubular steel frame with laminated �breboards, detachable and interchangable. - Mechanical cranking mechanism for backrest adjustment. - Cranking handle located at footend of bed. - Castors: 4 x 100mm grey rubber, diagonal 2 with brakes. - Mattress base size: 1905mm(L) x 915mm(W). - Height to mattress base: 550mm.

Hospital BedsProduct type: Fixed HeightSingle Fowler Position/Hospital Bedstead

102-B

15


[email protected]

www.mod

iezha

m.com

Hospital Beds

- 2-section, single fowler mattress base. - Frame: Tubular mild steel. - Mattress base: 1.2mm-thick steel sheet with ventilation holes. - Finishing: Epoxy powder coated. - Backrest adjustment by cranking mechanism. - Cranking handle located at footend of bed. - Castors: 4 x 100mm grey rubber, diagonal 2 with brakes. - Mattress base size: 1905mm(L) x 915mm(W). - Height to mattress base: 550mm.

103-AProduct type: Fixed HeightSingle Fowler Position Hospital Bedstead (Steel Head & Leg Frame)

16


[email protected]

www.mod

iezha

m.com

Hospital Beds

- Frame: Tubular mild steel. - Mattress base: 1.2mm-thick steel sheet with ventilation holes. - Detachable tubular steel head and leg frames. - Finishing: Epoxy powder coated. - Mattress base size: 1905mm(L) x 915mm(W). - Height to mattress base: 550mm. - Castors for all 4 legs: 4 x 75mm grey rubber, diagonal 2 with brakes.

104-AProduct type: Fixed HeightStandard Flat Top Hospital Bedstead (Steel Head & Leg Frames)

17


[email protected]

www.mod

iezha

m.com

104-B Product type: Fixed Height Standard Flat Top Hospital Bedstead (Steel Head & Leg Frames)

- Frame: Tubular mild steel. - Mattress base: 1.2mm-thick steel sheet with ventilation holes. - Detachable tubular steel head and leg frames. - Finishing: Epoxy powder coated. - Mattress base size: 1905mm(L) x 915mm(W). - Height to mattress base: 550mm. - Head frame mounted on 2 units of 75mm grey rubber castors. - Leg frame mounted on non-slip rubber studs.

Hospital Beds

No Image

18


[email protected]

www.mod

iezha

m.com

- Frame: Tubular mild steel. - Mattress base: 1.2mm thick steel with ventilation holes. - Head & footend panels: �xed laminated �breboard panels with tubular steel frame. - Finishing: epoxy powder coated. - Castors: 4 x 75mm, grey rubber, diagonal 2 with brakes. - Mattress base: 1905mm(L) x 915mm(W). - Height to mattress base: 550mm.

105-AProduct type: Fixed HeightStandard Hospital Bedstead - Flat Top, Fixed Height - Laminated Panels - Fixed

Hospital Beds

19


[email protected]

www.mod

iezha

m.com

Hospital Beds

- Frame & safety siderails: tubular mild steel. - Mattress base: 1.2mm-thick steel sheet with ventilation holes. - Full length safety siderails with self-locking mechanism. - Siderails lowered down vertically when not in use. - Finishing: epoxy powder coated. - Castors: 4 x 100mm grey rubber, diagonal 2 with brakes. - Mattress base size: 1905mm(L) x 915mm(W). - Height to mattress base: 610mm.

106-AProduct type: Fixed HeightAdult Cot Bed - Flat Top, Fixed Height

20


[email protected]

www.mod

iezha

m.com

Hospital Beds

- Frame & safety siderails: tubular mild steel. - Mattress base: 1.2mm thick steel sheet with ventilation holes. - Backrest adjustable by cranking mechanism with cranking handle located at footend of bed. - Full length safety siderails with self-locking mechanism. - Siderails lowered down vertically when not in use. - Finishing: epoxy powder coated. - Castors: 4 x 100mm grey rubber, diagonal 2 with brakes. - Mattress base: 1905mm(L) x 915mm(W). - Height to mattress base: 610mm.

106-BProduct type: Fixed HeightAdult Cot Bed - Fixed Height - Single Fowler Position

21


[email protected]

www.mod

iezha

m.com

Hospital Beds

- Frame and safety siderails: tubular mild steel. - Mattress base: 1.2mm-thick steel sheet with ventilation holes. - Backrest and knee bend positions adjustable by cranking mechanism with individual cranking handles located at footend of bed. - Full length safety siderails with self-locking mechanism. - Castors: 4 x 100mm grey rubber, diagonal 2 with brakes. - Mattress base: 1905mm(L) x 915mm(W). - Height to mattress base: 610mm.

106-CProduct type: Fixed HeightAdult Cot Bed - Fixed Height - Double Fowler Positions

22


[email protected]

www.mod

iezha

m.com

- Frame & safety siderails: tubular mild steel. - Mattress base: 1.2mm thick steel sheet with ventilation holes. - Full length safety siderails with self-locking mechanism. - Siderails lowered down vertically when not in use. - Finishing: epoxy powder coated. - Castors: 4 x 75mm, grey rubber, diagonal 2 with brakes. - Mattress base size: 1370mm(L) x 760mm(W). - Height to mattress base: 600mm. - c/w 75mm-thick P.U. foam mattress with Calico cover.

Hospital Beds

Product type: Fixed HeightHospital Child Cot Bed - Flat Top, Fixed Height

107-A

23


[email protected]

www.mod

iezha

m.com

Hospital Beds

- Frame & safety siderails: tubular mild steel. - Mattress base: 1.2mm thick steel sheet with perforated ventilation holes (manually adjustable into 3 tilting positions). - Full length safety siderails, c/w self-locking mechanism. - Siderails lowered down vertically when not in use. - Finishing: epoxy powder coated. - Castors: 4 x 75mm, grey rubber, diagonal 2 with brakes. - Mattress base size: 1370mm(L) x 760mm(W). - Height to mattress base: 600mm. -c/w 75mm-thick P.U. foam mattress with Calico cover.

107-BProduct type: Fixed HeightHospital Child Cot Bed - Fixed Height, Flat Top - Tilting

24


[email protected]

www.mod

iezha

m.com

Hospital Beds

- Tubular steel frame. - Finishing: epoxy powder coated. - Heavy duty nylon canvas material for bedtop - blue. - Size: 1850mm(L) x 750mm(W) x 600mm(H).

Product type: Fixed HeightCanvas Bed For Mobile Blood Donor Sessions - Foldable Legs & Lengthwise

157-B

25


[email protected]

www.mod

iezha

m.com

Bedside Accessories105-CProduct type: AccessoriesPatient's Lifter Pole (Monkey Pulley) for Attachment to Bed Head Panel

- Tubular mild steel construction. - Finishing: Epoxy powder coated. - Adjustable hand grip. - 2 nos. brackets/clamps for securing to bed head panel.

26


[email protected]

www.mod

iezha

m.com

Bedside Accessories

- Tubular steel frame, chrome-plated. - Brown vinyl PVC-padded foam cushion top (75mm thick). (a) Retractable into a chair. (b) Extendable into a bed. - Overall size: 1850mm(L) x 600mm(W) x 450mm(H).

Product type: AccessoriesMother's Bed/Chair (Paediatrics Ward)

27


[email protected]

www.mod

iezha

m.com

Bedside AccessoriesProduct type: AccessoriesB.S. Latex Mattress for Hospital Beds

- Size: 1905mm(L) x 915mm(W) x 100mm(H). - Sanitised, water-repellant and �re retardant. - PVC (Medicare, Australia) zip bag cover. - VS 105-M-A : B.S. Latex Mattress - VS 105-M-B : P.U. Foam Mattress

28


[email protected]

www.mod

iezha

m.com

Bedside Accessories

110-AProduct type: Overbed (Cardiac) TablesOverbed Table (Cardiac Table) Table Top Height Adjustable

- Frame: Tubular mild steel. - Finishing: Epoxy powder coated, chrome-plateda adjustable arm. - Table top: Manual height adjustable from 700mm to 1100mm. - Table top constructed of laminated �breboard with all-round moulded rubber edgings. - Size: 830mm(L) x 360mm(W). - Castors: 4 x 50mm swivelling type.

29


[email protected]

www.mod

iezha

m.com

Bedside Accessories110-A/BLUE LAMINATEDProduct type: Overbed (Cardiac) TablesOverbed Table (Cardiac Table) Table Top Height Adjustable

- Frame: Tubular mild steel. - Finishing: Epoxy powder coated, chrome-plateda adjustable arm. - Table top: Manual height adjustable from 700mm to 1100mm. - Table top constructed of blue laminated �breboard with all-round moulded rubber edgings. - Size: 830mm(L) x 360mm(W). - Castors: 4 x 50mm swivelling type.

30


[email protected]

www.mod

iezha

m.com

Bedside Accessories

110-BProduct type: Overbed (Cardiac) TablesOverbed Table (Cardic Table) Table Top Height Adjustable

- Frame: Tubular mild steel. - Finishing: Epoxy powder coated, chrome-plateda adjustable arm. - Table top: Spring-assisted height adjustable from 700mm to 1100mm. - Table top constructed of laminated �breboard with all-round moulded rubber edgings. - Size: 830mm(L) x 360mm(W). - Castors: 4 x 50mm swivelling type.

31


[email protected]

www.mod

iezha

m.com

Bedside Accessories

110-CProduct type: Overbed (Cardiac) TablesOverbed Table (Elegance)

- Frame: Mild steel construction. - Finishing: Epoxy powder coating, chrome-plated sliding parts. - Gas spring-assisted (Germany) height adjustment. - Height adjustable from 700mm to 1100mm. - Table top made of laminated �breboard surface with all round ramin edgings. - Surface size: 830mm(L) x 360mm(W). - Castors: 4 x 50mm grey rubber. - Load capacity for table surface: 25kg.

32


[email protected]

www.mod

iezha

m.com

Bedside Accessories110-C/BLUE LAMINATEDProduct type: Overbed (Cardiac) TablesOverbed Table (Elegance)

- Frame: Mild steel construction. - Finishing: Epoxy powder coating, chrome-plated sliding parts. - Gas spring-assisted (Germany) height adjustment. - Height adjustable from 700mm to 1100mm. - Table top made of blue laminated �breboard surface with all round ramin edgings. - Surface size: 830mm(L) x 360mm(W). - Castors: 4 x 50mm grey rubber. - Load capacity for table surface: 25kg.

33


[email protected]

www.mod

iezha

m.com

Bedside Accessories

- Frame: Tubular mild steel. - Finishing: epoxy powder coated. - Table top: �xed height at 930mm. - Table top constructed of laminated �breboard with all-round mounted rubber edgings. - Size: 830mm(L) x 360mm(W). - Castors: 4 x 50mm swivelling type.

111Product type: Overbed (Cardiac) TablesOverbed Table, Fixed Height

34


[email protected]

www.mod

iezha

m.com

- Steel sheet constructed. - A drawer and 2-shelf closed cabinet. - Tray at rear for holding vacuum �ask and drink containers. - Towel rail at rear of locker. - Locker top constructed of laminated �breboard with all-round moulded rubber edgings. - Locker top size: 406mm x 406mm. - Finishing: epoxy powder coated. - Castors: 4 x 50mm swivelling type. - Overall size: 406mm(W) x 510mm(D) x 800mm(H).

112-AProduct type: Bedside LockersBedside Locker (Classic)

Bedside Accessories

35


[email protected]

www.mod

iezha

m.com

Bedside Accessories

- Steel sheet constructed. - A drawer and 2-shelf closed cabinet. - Tray at rear for holding vacuum �ask and drink containers. - Towel rail at rear of locker. - Locker top constructed of blue laminated �breboard with all-round moulded rubber edgings. - Locker top size: 406mm x 406mm. - Finishing: epoxy powder coated. - Castors: 4 x 50mm swivelling type. - Overall size: 406mm(W) x 510mm(D) x 800mm(H).

112-A/BLUE LAMINATEDProduct type: Bedside LockersBedside Locker (Classic)

36


[email protected]

www.mod

iezha

m.com

Bedside Accessories

- Steel sheet constructed. - A drawer and a 2-shelf closed cabinet. - Recess at rear for keeping vacuum �ask and drink containers. - Towel rail at rear of locker. - Locker top constructed of laminated �breboard with all-round moulded rubber edgings. - Locker top size: 406mm x 406mm. - Finishing: Epoxy powder coated. - Castors: 4 x 50mm swivelling type. - Overall size: 406mm(W) x 510mm(D) x 800mm(H).

112-BProduct type: Bedside LockersBedside Locker (Elegance)

37


[email protected]

www.mod

iezha

m.com

-Steel sheet constructed. - A drawer and a 2-shelf closed cabinet. - Recess at rear for keeping vacuum �ask and drink containers. - Towel rail at rear of locker. - Locker top constructed of blue laminated �breboard with all-round moulded rubber edgings. - Locker top size: 406mm x 406mm. - Finishing: Epoxy powder coated. - Castors: 4 x 50mm swivelling type. - Overall size: 406mm(W) x 510mm(D) x 800mm(H).

Bedside Accessories

112-B/BLUE LAMINATEDProduct type: Bedside LockersBedside Locker (Elegance)

38


[email protected]

www.mod

iezha

m.com

Bedside Accessories

- Steel sheet constructed. - A drawer and a 2-shelf closed cabinet. - Drawer and cabinet door constructed of �breboard material. - Locker top: Laminated �breboard with all-round moulded rubber edgings. - Side railing: 40mm high on 3 sides of locker top. - Size: 406mm x 406mm. - Finishing: Epoxy powder coated. - Castors: 4 x 50mm grey rubber. - Size: 406mm(W) x 510mm(D) x 800m(H).

112-CProduct type: Bedside LockersBedside Locker (Deluxe)

39


[email protected]

www.mod

iezha

m.com

- Complete �breboard constructed. - A drawer and a 2-shelved closed cabinet. - With all-round varnished ramin wood edgings. - Stainless steel towel rail at rear of locker. - Locker top size: 450mm(W) x 500mm(D). -Castors: 4 x 50mm grey rubber. -Overall size: 450mm(W) x 500mm(D) x 800mm(H).

Bedside Accessories

112-DProduct type: Bedside LockersBedside Locker

40


[email protected]

www.mod

iezha

m.com

- Tubular steel framework. - Finishing: Epoxy powder coated. - Lowered when not in use. - Detachable and interchangable. - Safety catch.

Bedside Accessories151-AProduct type: Safety SiderailsStandard Safety Sidecots/Rails - ¾ Length

41


[email protected]

www.mod

iezha

m.com

-Tubular steel framework. -Finishing: Epoxy powder coated. -Lowered when not in use. -Detachable and interchangable. -Self-locking device at both ends.

Bedside Accessories151-BProduct type: Safety SiderailsTelescopic Safety Sidecots/Rails - Full Length

42


[email protected]

www.mod

iezha

m.com

- Aluminium, lightweight.

- Fold-down version.

- Auto-locking device - footend control.

- Detachable and interchangable.

Bedside Accessories151-CProduct type: Safety SiderailsSafety Siderails for Hospital Beds

43


[email protected]

www.mod

iezha

m.com

- Tubular steel framework. - 3 reclining positions. - Finishing: Epoxy powder coated. - Removable and washable beige canvas. - Size: 460mm(W) x 510mm(H).

Bedside Accessories

163Product type: AccessoriesCanvas Backrest

44


[email protected]

www.mod

iezha

m.com

-Frame: Tubular steel frame. -Finishing: Epoxy powder coated. -Concave anodised aluminium top - 1.2mm thick. -Chromium-plated pushing handle at both ends. -Size: 1980mm(L) x 560mm(W) x 800mm(H). Castors: -(a) Model VS 108-A: 4 x 125mm, grey rubber. -(b) Model VS 108-20: 4 x 200mm, grey rubber. Optional: -(a) Matress for hard top patient trolley. -(b) 50mm-thick PU foam with brown colour vinyl PVC covering. (c) Size: 1850mm(L) x 560mm(W).

108-AProduct type: Fixed HeightPatient Hard Top Aluminium Trolley - Fixed Height

Patient Transfer Trolleys

45


[email protected]

www.mod

iezha

m.com


-Frame: tubular mild steel. -Finishing: epoxy powder coated. -Stainless steel sheet constructed trolley top. -c/w a manually adjustable backrest - 4 reclining positions. Accessories: - (a) 50mm-thick removable P.U. foam mattress with brown vinyl PVC cover. (b) A pair of telescopic adjustable safety siderails. (c) A stainless steel double-hooked IV drip pole with receiving sockets at 4 corners. (d) Pushing rubberised bumper handles at both ends. (e) Utility tray and oxygen cylinder bracket located beneath trolley top. - Castors: 4 x 125mm grey rubber, diagonal 2 with brakes. Size: 1980mm(L) x 560mm(W) x 800mm(H).

109-A-1Product type: Fixed HeightPatient Transfer Trolley - Fixed Height

46


[email protected]

www.mod

iezha

m.com

- Frame: tubular mild steel. - Finishing: epoxy powder coated. - Stainless steel sheet constructed trolley top. - c/w a manually adjustable backrest - 4 reclining positions. - Accessories: (a) 50mm-thick removable P.U. foam mattress with brown vinyl PVC cover. (b) A pair of telescopic adjustable safety siderails. (c) A stainless steel double-hooked IV drip pole with receiving sockets at 4 corners. (d) Pushing rubberised bumper handles at both ends. (e) Utility tray and oxygen cylinder bracket located beneath trolley top. - Castors: 4 x 200mm grey rubber, diagonal 2 with brakes. - Size: 1980mm(L) x 560mm(W) x 800mm(H).

Patient Transfer Trolleys109-A-20Product type: Fixed HeightPatient Transfer Trolley - Fixed Height

47


[email protected]

www.mod

iezha

m.com

- Frame: tubular mild steel. - Finishing: epoxy powder coated. - Stainless steel sheet constructed trolley top, c/w a mechanical cranking adjustable backrest, cranking handle at footend of trolley. - Accessories: (a) 50mm-thick removable P.U. foam mattress with brown vinyl PVC cover. (b) A pair of telescopic safety siderails. (c) A stainless steel double-hooked IV drip pole with receiving sockets at 4 corners. (d) Revolving bumbers at 4 corners. (e) Utility tray and oxygen cylinder bracket located beneath trolley top. (f ) Detachable headend and footend wooden panels. -Castors: 4 x 125mm grey rubber, diagonal 2 with brakes. Size: 1980mm(L) x 560mm(W) x 800mm(H).

Patient Transfer Trolleys109-B-1Product type: Fixed HeightPatient Recovery Trolley - Fixed Height

48


[email protected]

www.mod

iezha

m.com

- Frame: tubular mild steel. - Finishing: epoxy powder coated. -Stainless steel sheet constructed trolley top, c/w a mechanical cranking adjustable backrest, -cranking handle at footend of trolley. -Accessories: (a) 50mm-thick removable P.U. foam mattress with brown vinyl PVC cover. (b) A pair of telescopic safety siderails. (c) A stainless steel double-hooked IV drip pole with receiving sockets at 4 corners. (d) Revolving bumbers at 4 corners. (e) Utility tray and oxygen cylinder bracket located beneath trolley top. (f ) Detachable headend and footend wooden panels. - Castors: 4 x 200mm grey rubber, diagonal 2 with brakes. - Size: 1980mm(L) x 560mm(W) x 800mm(H).

Patient Transfer Trolleys109-B-20Product type: Fixed HeightPatient Transfer Trolley - Fixed Height

49


[email protected]

www.mod

iezha

m.com


-Frame: tubular mild steel. -Finishing: epoxy powder coated. -Stainless steel sheet constructed trolley top. -Cranking mechanism adjustment for: (a) backrest. (b) Trendelenburg positions - forward and reverse. -Individual cranking handle located at footend of bed. Revolving bumpers at 4 corners. -Accessories: (a) 50mm-thick removable P.U. foam mattress with brown vinyl PVC cover. (b) A pair of telescopic adjustable safety siderails. (c) A stainless steel double-hooked IV drip pole with receiving sockets at 4 corners. (d) Utility tray and oxygen cylinder bracket located beneath trolley top. (e) Detachable headend and footend wooden panels. Castors: 4 x 200mm grey rubber, diagonal 2 with brakes. Size: 1980mm(L) x 560mm(W) x 800mm(H).

109-C-20Product type: Fixed HeightPatient Transfer Trolley - Fixed Height

50


[email protected]

www.mod

iezha

m.com


- Frame: tubular mild steel. - Finishing: epoxy powder coated. - Stainless steel sheet constructed trolley top. - Cranking mechanism adjustment for: (a) HI-LO positions from 500mm to 850mm. (b) Backrest adjustment. Individual cranking handles located at footend of bed. Rubber bumpers at 4 corners. Accessories: (a) 50mm-thick removable P.U. foam mattress with vinyl PVC cover. (b) A pair of telescopic adjustable safety siderails. (c) A stainless steel double-hooked IV drip pole with receiving sockets at headend. (d) Utility tray and oxygen cylinder bracket located beneath trolley top. (e) Detachable headend and footend wooden panels. Castors: 4 x 150mm grey rubber, diagonal 2 with brakes. Size: 1980mm(L) x 640mm(W).

109-DProduct type: HI-LOHI-LO Patient Transfer Trolley

51


[email protected]

www.mod

iezha

m.com


-Hydraulic HI-LO control - 500mm to 900mm. -Hydarulic system (Germany). -Foot pump operated at both sides of trolley. -Gas spring control for forward and reverse Trendelenburg positions and backrest adjustment. -Mild steel constructed framework.

-Stainless steel sheet mattress base.

-Finishing: epoxy powder coated. Accessories: (a) Vinyl PVC P.U foam mattress - 50mm - removable. (b) 1 pair of 'fold-down' lightweight aluminium safety siderails with self-locking mechanisms. (c) 1 no. double-hooked stainless steel IV pole with receiving sockets at 4 corners. (d) Pushing rubberised bumper handle at both ends. (e) Oxygen cylinder bracket beneath mattress base. (f ) Utility tray beneath mattress base. Size: (a) 2080mm(L) x 700mm(W) (overall). (b) 1980mm(L) x 600mm(W) (mattress base). Castors: 4 x 200mm non-marking grey rubber, diagonal 2 with double brakes - static and directional. Optional (a) VS 151-B. (b) Telescopic model. (c) Self-locking mechanism. (d) Chrome-plated.

109-EProduct type: HI-LOHI-LO Patient Transfer/Recovery Trolley

52


[email protected]

www.mod

iezha

m.com

Delivery Beds

- 2-section bed top, X-ray transluscent perspex mattress base. - Hydraulic HI-LO with foot pump control. - Gas spring-assisted adjustable backrest and retractable legrest section. - Tubular mild steel framework. - Finishing: Epoxy powder coated. -Castors: 4 x 125mm non-marking grey rubber, all with brakes. Size: (a) Lithotomy positions: 1120mm(L) x 815mm(W). (b) Extended positions: 1955mm(L) x 815mm(W). (c) HI-LO height: 600mm - 900mm. - Accessories (a) 2-section removable 75mm-thick vinyl PVC cover P.U. foam mattress (black). (b) 1 unit stainless steel double-hooked adjustable IV drip pole with receiving sockets at both headend corners. (c) 1 pair of adjustable lithotomy stirrups with adjustable, padded calf-rest. (d) 1 unit stainless steel rectangular basin mounted on a retractable bracket. (e) 1 pair of detachable safety sidecots (chrome). (f ) 1 pair of detachable hand grips. (g) 1 unit single-step stool.

113Product type: All ModelsDelivery/Obstetric Bed (Deluxe HI-LO)

53


[email protected]

www.mod

iezha

m.com

Delivery Beds

- Adjustable backrest and retractable legrest section. - Leg section with removable vinyl PVC mattress, retractable underneath main section to maintain lithotomy positions. - Main section with manually adjustable backrest: 4 reclining positions. -75mm-thick vinyl PVC-padded P.U. foam mattress. - Forward and reverse Trendelenburg positions by means of a cranking mechanism with handle located at both sides of bed. - Finishing: Epoxy powder coated. - Castors: 4 x 125mm grey rubber, all with brakes. Size: (a) Lithotomy positions: 1100mm(L) x 760mm(W). (b) Extended positions: 1880mm(L) x 760mm(W). (c) Height �xed at 800mm.

Accessories (a) 1 unit stainless steel, double-hooked adjustable IV pole. (b) 1 pair of adjustable padded lithotomy stirrups with canvas leggings. (c) 1 unit stainless steel soiled basin (360mm) mounted on a retractable bracket.

114-AProduct type: All ModelsDelivery/Obstetric Bed (Standard Mobile)

54


[email protected]

www.mod

iezha

m.com

Delivery Beds

- Adjustable backrest and retractable legrest section. - Leg section with removable vinyl PVC mattress, retractable underneath main section to maintain lithotomy positions. - Main section with a manually adjustable backrest: 4 reclining positions. - 75mm-thick vinyl PVC-padded P.U. foam mattress. - Forward and reverse Trendelenburg positions by means of a cranking mechanism with handle located at both sides of bed. - Finishing: Epoxy powder coated. - 4 legs mounted on rubber studs. SIze: (a) Lithotomy positions: 1100mm(L) x 760mm(W). (b) Extended positions: 1880mm(L) x 760mm(W). (c) Height �xed at 800mm. Accessories (a) 1 unit stainless steel, double-hooked, adjustable IV pole. (b) 1 pair of adjustable padded lithotomy stirrups with canvas leggings. (c) 1 unit stainless steel soiled basin (360mm) mounted on a retractable bracket.

114-BProduct type: All ModelsDelivery/Obstetric Bed (Standard)

55


[email protected]

www.mod

iezha

m.com

Delivery Beds

- Tubular steel frame. - Finishing: Epoxy powder coated. - Stainless steel mattress base. - Leg section with removable vinyl PVC mattress, retractable underneath main section to maintain lithotomy positions. - Main section with gas spring-assisted adjustable backrest. - 75mm-thick, removable vinyl PVC-padded P.U. foam mattress. - Reverse Trendelenburg positions by means of a gas spring mechanism with handle located at headend of bed. - Castors: 4 x125mm grey rubber, all with brakes. Size: (a) Lithotomy positions: 1100mm(L) x 760mm(W). (b) Extended positions: 1880mm(L) x 700mm(W). (c) Fixed height at 800mm. - Accessories: (a) 1 unit stainless steel, double-hooked, adjustable IV pole. (b) 1 pair of adjustable padded lithotomy stirrups with canvas leggings. (c) 1 unit stainless steel soiled basin (360mm) mounted on a retractable backet.

114-CProduct type: All ModelsDelivery/Obstetric Bed (Classic)

56


[email protected]

www.mod

iezha

m.com

Delivery Beds

- Tubular steel framework. - 75mm-thick vinyl PVC-padded P.U. foam cushion top. - Manually adjustable backrest: 4 reclining positions. - Legrest can be manually lowered for lithotomy positions. - Finsihing: Epoxy powder coated. - Size: 1850mm(L) x 600mm(W) x 750mm(H).

- Accessories (a) 1 unit stainless steel, double-hooked adjustable IV drip pole. (b) 1 pair of adjustable padded lithotomy stirrups with canvas leggings. (c) 1 pair of safety siderails.

115Product type: All ModelsDelivery Couch

57


[email protected]

www.mod

iezha

m.com

Examination Couches

- Tubular steel framework. - 4 legs mounted on rubber studs. - Finishing: Epoxy powder coated. - 75mm-thick vinyl PVC-padded P.U. foam cushion top (black). - Manually adjustable backrest: 4 reclining positions. - Size: 1850mm(L) x 600mm(W) x 750mm(H).

116-AProduct type: GeneralExamination Couch (Standard)

58


[email protected]

www.mod

iezha

m.com

Examination Couches

- Tubular steel framework. - 4 legs mounted on rubber studs. - Finishing: Epoxy powder coated. - 75mm-thick vinyl PVC-padded P.U. foam cushion top (black). - Manually adjustable backrest: 4 reclining positions. - Framework in 'knock-down' form for easy transportation and packing purposes. - Size: 1850mm(L) x 600mm(W) x 750mm(H).

116-BProduct type: GeneralExamination Couch (Knock-Down Frame)

59


[email protected]

www.mod

iezha

m.com

Examination Couches

- Tubular steel framework. - 4 legs mounted on rubber studs. - Finishing: Epoxy powder coated. - 75mm-thick vinyl PVC-padded P.U. foam cushion top (black). - Manually adjustable backrest: 4 reclining positions. - Size: 1850mm(L) x 600mm(W) x 750mm(H). - Step stool: single step attached to couch frame.

116-CProduct type: GeneralExamination Couch c/w Step

60


[email protected]

www.mod

iezha

m.com

Examination Couches

- Varnished wooden framework. - 75mm-thick vinyl PVC-padded P.U. foam cushion top. - Adjustable backrest: 4 reclining positions. - Size: 1850mm(L) x 600mm(W) x 750mm(H).

116-WProduct type: GeneralWooden Ultrasound Couch

61


[email protected]

www.mod

iezha

m.com

Examination Couches

- Tubular steel framework. - 4 legs mounted on rubber studs. - Drawers and shelves constructed of steel sheets. - Finishing: Epoxy powder coated. - 75mm-thick vinyl PVC-padded P.U. foam cushion top (black). - Manually adjustable backrest: 4 reclining positions. - 3 nos. 150mm-deep drawers. - 2 nos. utilty shelves. - 1 no. retractable step stool. - Size: 1850mm(L) x 600mm(W) x 750mm(H).

117Product type: GeneralExamination Couch c/w Drawers & Step Stool

62


[email protected]

www.mod

iezha

m.com

Examination Couches

- Tubular steel framework. - 4 legs mounted on rubber studs. - Cabinet and shelves constructed of steel sheets with sliding doors. - Finishing: Epoxy powder coated. - 75mm-thick vinyl PVC-padded P.U. foam cushion top (black). - Manually adjustable backrest: 4 reclining positions. - Size: 1850mm(L) x 600mm(W) x 750mm(H).

118-AProduct type: GeneralExamination Couch c/w Cabinet

63


[email protected]

www.mod

iezha

m.com

Examination Couches

- Tubular steel framework. - 4 legs mounted on rubber studs. - Cabinet constructed of steel sheets and 2 drawers. - 75mm-thick vinyl PVC-padded P.U. foam cushion top (black). - Manually adjustable backrest: 4 reclining positions. - Size: 1850mm(L) x 600mm(W) x 750mm(H).

118-BProduct type: GeneralExamination Couch c/w Cabinet & 2 Drawers

64


[email protected]

www.mod

iezha

m.com

Examination Couches

-Tubular steel framework. - 4 legs mounted on rubber studs. - 75mm-thick vinyl PVC-padded P.U. foam cushion top (black). - Finishing: Epoxy powder coated. - Adjustable backrest: 4 reclining positions. - A pair of lithotomy stirrups with canvas leggings. - Size: 1850mm(L) x 600mm(W) x 750mm(H).

119-AProduct type: GynaecologicalGynae Examination Couch (Standard)

65


[email protected]

www.mod

iezha

m.com

- Tubular steel framework. - 4 legs mounted on rubber studs. - 75mm-thick vinyl PVC-padded P.U. foam cushion top. - Finishing: Epoxy powder coated. - Adjustable backrest: 4 reclining positions. - A pair of lithotomy stirrups with canvas leggings. - 360mm diameter stainless steel basin mounted on a retractable bracket. - Double-hooked IV drip pole (chrome). - Single step attached. - Size: 1850mm(L) x 600mm(W) x 750mm(H).

119-BProduct type: GynaecologicalGynae Examination Couch (Hilux)

Examination Couches

66


[email protected]

www.mod

iezha

m.com

Examination Couches

- Tubular steel framework. - 4 legs mounted on rubber studs. - Cabinet constructed of steel sheet with one shelf/sliding doors. - Finishing: Epoxy powder coated. - 75mm-thick vinyl PVC-padded P.U. foam cushion top (black). - Manually adjustable backrest: 4 reclining positions. -Legrest lowered for lithotomy positions. - A pair of adjustable padded lithotomy stirrups with canvas leggings. - Size: 1850mm(L) x 600mm(W) x 750mm(H).

120Product type: GynaecologicalGynae Examination Couch c/w Cabinet

63

67


[email protected]

www.mod

iezha

m.com

Examination Couches

Tubular steel framework. 4 legs mounted on rubber studs. Cabinet and 2 drawers constructed of steel sheet. Cabinet with sliding doors. Finishing: Epoxy powder coated. 75mm-thick vinyl PVC-padded P.U. foam cushion top (black). Manually adjustable backrest: 4 reclining positions. Retractable legrest with removable vinyl PVC cushion. Soiled receptacle stainless steel basin mounted on retractable bracket. Pair of adjustable padded lithotomy stirrups with canvas leggings. Double-hooked IV drip pole (chrome). Size: 1850mm(L) x 600mm(W) x 750mm(H).

121Product type: GynaecologicalGynae Examination Couch c/w Cabinet/Drawers

68


[email protected]

www.mod

iezha

m.com

Examination Couches

- Frame: Tubular steel, epoxy coated. - 4 legs on rubber studs. - Step top: Non-slip rubber mat/plywood base. - Size: 400mm(W) x 460mm(D) x 400mm(H).

122-AProduct type: Step StoolsPatient's Step Stool (Double Step)

MODEL 122 - AMODEL 122 - B

MODEL 123 - A

MODEL 123 - B

69


[email protected]

www.mod

iezha

m.com

Examination Couches

- Frame: Tubular stainless steel. - 4 legs on rubber studs. - Step top: Non-slip rubber mat/plywood base. - Size: 400mm(W) x 460mm(D) x 400mm(H).

122-BProduct type: Step StoolsSurgeon's Step Stool (Double Step)

MODEL 122 - AMODEL 122 - B

MODEL 123 - A

MODEL 123 - B

70


[email protected]

www.mod

iezha

m.com

Examination Couches

MODEL 122 - A

MODEL 123 - A

MODEL 123 - B

MODEL 122 - B

- Frame: Tubular steel, epoxy coated. - 4 legs on rubber studs. - Step top: Non-slip rubber mat/plywood base. - Size: 400mm(W) x 230mm(D) x 200mm(H).

123-AProduct type: Step StoolsPatient's Step Stool (Single Step)

71


[email protected]

www.mod

iezha

m.com

Examination Couches

- Tubular stainless steel framework. - 4 legs on rubber studs. - Step top: Non-slip rubber mat/stainless steel base. - Size: 400mm(W) x 230mm(D) x 200mm(H).

MODEL 122 - A

MODEL 123 - A

MODEL 123 - B

MODEL 122 - B

123-BProduct type: Step StoolsSurgeon's Step Stool (Single Step)

72


[email protected]

www.mod

iezha

m.com

Dressing & Instrument Trolleys

- Frame: 25mm x 1.2mm SUS hollow section. - 2 nos stainless steel shelves - 1.0mm SUS/304/B sheet. - Guardrails: 50mm high on 3 sides for top shelf. - Castors: 4 x 75mm grey rubber.

- Model 124-A-1: 900mmL x 450mmW X 860mmH. - Model 124-A-2: 750mmL x 450mmW X 860mmH. - Model 124-A-3: 600mmL x 450mmW X 860mmH. - Model 124-A-4: 450mmL x 450mmW X 860mmH.

124-AProduct type: Instrument TrolleysInstrument Trolly - Stainless Steel c/w Guardrails

73


[email protected]

www.mod

iezha

m.com

- Frame: 25mm x 1.2mm SUS hollow section. - 2 nos stainless steel shelves - 1.0mm SUS/304/B sheet. - No rails with all corners rounded. - Castors: 4 x 75mm grey rubber

- Model 124-B-1: 900mmL x 450mmW x 860mmH. - Model 124-B-2: 750mmL x 450mmW x 860mmH. - Model 124-B-3: 600mmL x 450mmW x 860mmH. - Model 124-B-4: 450mmL x 450mmW x 860mmH.

Dressing & Instrument Trolleys124-BProduct type: Instrument TrolleysInstrument Trolley - Stainless Steel Without Guardrails - Flat Top

74


[email protected]

www.mod

iezha

m.com

- Frame: 25mm x 1.2mm SUS hollow section. - 3 shelves: 1.0mm SUS/304/B sheet with 25mm bendup lips on all 4 sides. - c/w pushing handles at both ends. - Castors: 4 x 100mm grey rubber.

- Model 124-C-1: 900mmL x 500mmW x 960mmH. - Model 124-C-2: 750mmL x 500mmW x 960mmH. - Model 124-C-3: 600mmL x 500mmW x 960mmH.

Dressing & Instrument Trolleys124-CProduct type: Instrument TrolleysInstrument Trolley - Stainless Steel - 3 Tiers

75


[email protected]

www.mod

iezha

m.com


-Frame: 25mm x 1.2mm SUS hollow frame. -2 removable shelves - 1.0mm SUS/304/B sheet. - Without guardrails. - Castors: 4 x 75mm grey rubber.

- Model 125-A-1: 900mmL x 450mmW x 860mmH. - Model 125-A-2: 750mmL x 450mmW x 860mmH. - Model 125-A-3: 600mmL x 450mmW x 860mmH. - Model 125-A-4: 450mmL x 450mmW x 860mmH.

125-AProduct type: Instrument TrolleysInstrument Trolley - Stainless Steel

76


[email protected]

www.mod

iezha

m.com

- Frame: 25mm x 1.2mm SUS hollow section. - 2 removable shelves: 1.0mm SUS/304/B sheet. - With guardrails on 3 sides for both shelves, top guardrails removable. - Castors: 4 x 75mm grey rubber.

- Model 125-B-1: 900mmL x 450mmW x 860mmH. - Model 125-B-2: 750mmL x 450mmW x 860mmH. - Model 125-B-3: 600mmL x 450mmW x 860mmH. - Model 125-B-4: 450mmL x 450mmW x 860mmH.

Dressing & Instrument Trolleys125-BProduct type: Instrument TrolleysInstrument Trolley - Stainless Steel

77


[email protected]

www.mod

iezha

m.com

- Tubular mild steel frame. - Finishing: chrome-plated. - 2 stainless steel shelves - 1.0mm SUS/304/B sheet. - Guardrails: 50mm high on 3 sides for top shelf. - Castors: 4 x 75mm grey rubber.

- Model 126-1: 900mmL x 450mmW x 860mmH. - Model 126-2: 750mmL x 450mmW x 860mmH. - Model 126-3: 600mmL x 450mmW x 860mmH. - Model 126-4: 450mmL x 450mmW x 860mmH.


126Product type: Instrument TrolleysInstrument Trolley c/w Guardrails for Clinic & Examination Room

78


[email protected]

www.mod

iezha

m.com

- Tubular mild steel frame. - Finishing: epoxy powder coated. - 2 stainless steel shelves - 1.0mm SUS/304/B sheet. - Guardrails - 50mm high on 3 sides for top shelf. - Castors: 4 x 75mm grey rubber.

- Model 127-A-1: 900mmL x 450mmW x 860mmH. - Model 127-A-2: 750mmL x 450mmW x 860mmH. - Model 127-A-3: 600mmL x 450mmW x 860mmH. - Model 127-A-4: 450mmL x 450mmW x 860mmH.

127-AProduct type: Instrument TrolleysInstrument Trolley for General Ward Use


79


[email protected]

www.mod

iezha

m.com

- Tubular mild steel frame. - Finishing: epoxy powder coated. - 2 stainless steel shelves - 1.0mm SUS/304/B sheet. - Guardrails - 50mm high on 3 sides for top shelf. - Castors: 4 x 75mm grey rubber. - c/w (a) 1 unit stainless steel basin - 360mm diameter. (b) 1 unit 13-litre plastic soiled collection pail. Size of trolley: 750mmL x 450mmW x 860mmH.


VS 127-B-1Product type: Instrument TrolleysWashing & Changing Trolley for General Ward Use

80


[email protected]

www.mod

iezha

m.com

- Complete stainless steel construction. - c/w 2 removable shelves - 1.2mm SUS/304/B sheet. - Castors: 5 x 100mm grey rubber. - Size: 1200mmL x 450mmW x 860mmH


127-B-2Product type: Instrument TrolleysO.T. Curved/Half-Moon Trolley - Stainless Steel/2 Shelves

81


[email protected]

www.mod

iezha

m.com

- Tubular steel frame - epoxy powder coated. - 2 nos. stainless steel shelves - �xed. - Castors - 4 x 75mm grey rubber. - Model VS 128-A-1: 900mm(L) x 450mm(W) x 860mm(H). - Model VS 128-A-2: 750mm(L) x 450mm(W) x 860mm(H). - Model VS 128-A-3: 600mm(L) x 450mm(W) x 860mm(H). - Model VS 128-A-4: 450mm(L) x 450mm(W) x 860mm(H).


128-AProduct type: Instrument TrolleysInstrument Trolley - Without Guardrails

82


[email protected]

www.mod

iezha

m.com

- Standard accessories: (a) 3 nos. utility drawers. (b) 2 nos. shelves, top shelf with 25mm-high bendup lips on 3 sides. (c) 1 no. stainless steel bucket - 15 litres on swivel bracket. (d) 1 no. stainless steel basin - 360mm diameter. - Castors: 4 x 100mm grey rubber. -Size: 900mm(L) x 450mm(W) x 900mm(H). - Model VS 128-B-1: Complete stainless steel construction. -Model VS 128-B-2: Epoxy powder coated framework/drawers, stainless steel shelves.


128-BProduct type: Instrument TrolleysPlaster Application Trolley for Ortho Clinic & Plaster Room

83


[email protected]

www.mod

iezha

m.com

- Tubular steel frame. - Steel sheet constructed drawers. - Finishing: epoxy powder coated. - c/w 2 stainless steel sheet constructed shelves. - Guardrails on 3 sides for top shelf. - Castors: 4 x 75mm grey rubber. - Size: 750mm(L) x 450mm(W) x 850mm(H).


129-AProduct type: Dressing TrolleysDressing Trolley - 2 Drawers

84


[email protected]

www.mod

iezha

m.com

- Complete stainless steel construction. - c/w 2 shelves. - Guardrails on 3 sides for both shelves. - 2 drawers located beneath top shelf. - Castors: 4 x 75mm grey rubber. - Size: 750mm(L) x 450mm(W) x 850mm(H).

Dressing & Instrument Trolleys129-BProduct type: Dressing TrolleysDressing Trolley - Stainless Steel 2 Drawers

85


[email protected]

www.mod

iezha

m.com

- Tubular steel framework. - Steel sheet constructed drawer. - Finishing: epoxy powder coated. - c/w 2 stainless steel shelves. - Top shelf with guardrails on 3 sides. - Castors: 4 x 75mm grey rubber. - Size: 450mm(L) x 450mm(W) x 860mm(H).

Dressing & Instrument Trolleys130-AProduct type: Dressing TrolleysDressing Trolley - 1 Drawer

86


[email protected]

www.mod

iezha

m.com

- Complete stainless steel construction. - c/w 2 shelves. - Top shelf with guardrails on 3 sides. - Drawer located beneath top shelf. - Castors: 4 x 75mm grey rubber. - Size: 450mm(L) x 450mm(W) x 860mm(H).

Dressing & Instrument Trolleys130-BProduct type: Dressing TrolleysDressing Trolley - Stainless Steel 1 Drawer

87


[email protected]

www.mod

iezha

m.com

- Tubular steel frame. - Steel sheet constructed drawer and shelf. - Finishing: epoxy powder coated. - c/w a chrome-plated adjustable pole for hanging electrode cables. - Mounted on 4 units of 50mm swivelling castors - Size: 400mm(L) x 350mm(W) x 850mm(H).

Dressing & Instrument Trolleys165Product type: Instrument TrolleysECG Trolley - Standard Universal Model

88


[email protected]

www.mod

iezha

m.com

Neonatal Care

- Trolley constructed of tubular mild steel. - Steel sheet closed caninet and shelf. - Finishing: epoxy powder coated. - Castors: 4 x 75mm grey rubber. - c/w a clear perspex bassinette. - Inclusive of a 25mm-thick vinyl PVC mattress.

131-AProduct type: Baby Bassinette CotsBaby Bassinette Cot C/w Mobile Trolley With Cabinet

89


[email protected]

www.mod

iezha

m.com

Neonatal Care

- Trolley constructed of tubular steel frame. - Steel sheet closed cabinet and shelf. - Finishing: epoxy powder coated. - Castors: 4 x 75mm grey rubber. - c/w a clear perspex basinette. - Inclusive of a 50mm-thick vinyl PVC mattress. - c/w a bracket for securing basinette into 3 elevated positions.

131-BProduct type: Baby Bassinette CotsBaby Bassinette Cot C/w Mobile Trolley With Cabinet

90


[email protected]

www.mod

iezha

m.com

- Trolley constructed of tubular steel frame. - Steel sheet shelf. - Finishing: epoxy powder coated. - Castors: 4 x 75mm grey rubber. - c/w a clear perspex bassinette. - Inclusive of a 25mm-thick vinyl PVC mattress.

Neonatal Care132-AProduct type: Baby Bassinette CotsBaby Bassinette Coat C/w Mobile Trolley - Shelf Only

91


[email protected]

www.mod

iezha

m.com

- Trolley constructed of tubular steel frame. - Steel sheet shelf. - Finishing: epoxy powder coated. - Castors: 4 x 75mm grey rubber. - c/w a clear perspex bassinette. - Inclusive of a 50mm-thick vinyl PVC mattress. - c/w a bracket for securing bassinette into 3 elevated positions.

Neonatal Care132-BProduct type: Baby Bassinette CotsBaby Bassinette Cot C/w Mobile Trolley - Shelf Only

92


[email protected]

www.mod

iezha

m.com

- Tubular steel constructed mobile stand. - Mounted on 4 units of 100mm grey rubber castors, 2 with brakes. - Steel sheet constructed lamp box. - Height of lamp box adjustable. - Finishing: epoxy powder coated. - Voltage: 240V 50Hz. - c/w 6 lamps - 2 daylight and 4 blue phototherapy type. - ON/OFF switches, safety fuse, indicator light. - Timmer: maximum 3 hours. Hour meter.

Neonatal Care133-AProduct type: Baby Resuscitation UnitsBaby Phototherapy Unit - Single

93


[email protected]

www.mod

iezha

m.com

- Tubular steel constructed mobile stand. - Mounted on 4 units of 100mm ball bearing grey rubber castors, 2 with brakes. - Steel sheet constructed lamp box - upper and lower units. - Height of upper lamp box adjustable. - Finishing: epoxy powder coated. - Voltage: 240V 50Hz. - c/w 6 lamps - 2 daylight and 4 blue phototherapy type for upper box, 4 blue phototherapy type for lower box. - ON/OFF switches, safety fuse, indicator light. - Timmer: maximum 3 hours. - Hour meter.

133-BProduct type: Baby Resuscitation UnitsBaby Phototherapy Unit - Double Therapy For Jaundiced Baby

Neonatal Care

94


[email protected]

www.mod

iezha

m.com

- Tubular steel constructed framework and steel sheet lamp box, heater zone, drawers and shelves. - Finishing: epoxy powder coated. - Height of radiant heater adjustable. - Radiant heater c/w thermostat heat control, 2 nos. daylight lamp ON/OFF switches, safety fuse, - indicator light, timmer and hour meter. - Castors: 4 x 25mm ball bearing grey rubber x diagonal 2 with brakes. - Voltage: 240V 50Hz. - Accessories: (a) Instrument tray c/w cover. (b) Stainless steel double-hooked IV pole. (c) Oxygen cylinder bracket - 'E' size. (d) 3 nos. utility drawers & removable clear side perspex. (e) Tilting mattress base with removable 50mm-thick mattress.

Neonatal Care

134-AProduct type: Baby Resuscitation UnitsBaby Resuscitation Unit C/w Radiant Warmer

95


[email protected]

www.mod

iezha

m.com

- Tubular steel constructed mobile stand. - Lamp box: adjustable height. - Finishing: epoxy powder coated. - Castors: 4 x 100mm ball bearing grey rubber, all with brakes. - Voltage: 240V 50Hz. c/w: (a) Heater with thermostat regulator. (b) ON/OFF switches. (c) 2 nos. 32-Watt daylight lamp. (d) Timmer control. (e) Hour meter.

Neonatal Care

155Product type: OtherInfant Radiant Warmer/heater - Height Adjustable

96


[email protected]

www.mod

iezha

m.com

- Tubular steel framework. - Finishing: epoxy powder coated. - c/w: (a) Removable bath basin. (b) Brown vinyl PVC-padded top. (c) Castors: 4 x 75mm grey rubber, diagonal 2 with brakes. Optional: (a) c/w/ closed cabinet and half shelf.

Neonatal Care

158Product type: OtherBaby Bath Trolley

97


[email protected]

www.mod

iezha

m.com

Carts & Cabinets

- Constructed in combinations of 24/48 bins. - For patient unit dose dispensing. - Steel sheet constructed, reinforced body. - Stainless steel sheet constructed top with 25mm-high bendup lips on 3 sides. - Finishing: Epoxy powder coated. - Bins of the non-breakable, soft plastic type.

- Accessories: (a) 2 nos. utility drawers. (b) Removable cassette tray with lock for 24nos. bins. (c) All-round rubber bumper protection. (d) Pushing bar at one end. (e) Central-locking for cassette tray and drawers. (f ) Castors: 4 x 125mm grey rubber, diagonal 2 with brakes. (g) Approx. size: 760mm(L) x 450mm(W) x 950mm(H).

- Model 135-A: 48 bins/2 cassette trays/double-sided. - Model 135-B: 24 bins/1 cassette tray/single-sided.

135Product type: All ModelsPatient Medication Cart (Mobile)

98


[email protected]

www.mod

iezha

m.com

- Steel sheet constructed with reinforced framework. - Stainless steel sheet constructed top with 25mm-high bendup lips on 3 sides. - 4 drawers of di�erent sizes, all lockable with a central-locking mechanism. - Top drawer with �xed partitions for storage of medications. - Accessories (a) All-round rubber bumper protection. (b) Retractable utility shelf. (c) Cardiac board located at rear of cart. (d) Stainless steel, double-hooked IV pole. (e) Oxygen cylinder bracket. (f ) Finishing: Epoxy powder coated (red). (g) Castors: 4 x 100mm grey rubber, diagonal 2 with brakes. (h) Sizes: 660mm(L) x 460mm(W) x 860mm(H).

136Product type: All ModelsEmergency Cart/Resuscitation

Carts & Cabinets

99


[email protected]

www.mod

iezha

m.com

- Steel sheet constructed. - Wall-mounted/tabletop. - Finishing: Epoxy powder coated. - Voltage: 240V 50Hz. - 32W lamp, ON/OFF switch, 13A 3-pin plug, shadowless perspex fascia.

(a) Model 148-A, single view: 380mm(W) x 100mm(D) x 510mm(H). (b) Model 148-B, double view: 750mm(W) x 100mm(D) x 510mm(H). (c) Model 148-C, 3-in-1: 1120mm(W) x 100mm(D) x 510mm(H). (d) Model 148-D, 4-in-1: 1500mm(W) x 100mm(D) x 510mm(H). (e) Model 148-E, 4-in 1 c/w epoxy-coated mobile stand: 1500mm(W) x 1850mm(H). (f ) Model 148-F, 4-over-4 c/w epoxy-coated mobile stand: 1500mm(W) x 100mm (D) x 1100mm(H) (box size); overall height: 1850mm.

48-A148-B

148-C 148-D

Carts & Cabinets

148Product type: All ModelsX-Ray Viewer/Illuminator

100


[email protected]

www.mod

iezha

m.com

- Steel sheet constructed. - Finishing: Epoxy powder coated. - Single lockable door with lock and keys. - 3 nos. �xed sheet metal shelves. - Size: 460mm(W) x 230mm(D) x 600mm(H).

Carts & Cabinets149-AProduct type: All ModelsD.D.A./Medicine Cabinet - Wall-Mounted or Tabletop

101


[email protected]

www.mod

iezha

m.com

- Steel sheet constructed. - Finishing: Epoxy powder coated. - Twin lockable doors and �xed sheet metal shelves. - Inner lockable compartment for storage of poison. - Size: 600mm(W) x 230mm(D) x 700mm(H).

Carts & Cabinets

149-BProduct type: All ModelsD.D.A./Poison Cabinet - Wall-Mounted

102


[email protected]

www.mod

iezha

m.com

- Steel sheet constructed. - Twin lockable doors. - Fixed metal sheet shelves. - Inner lockable compartment for storage of poison. - Wall-mounted. - Finishing: Epoxy powder coated. - Size: 600mm(W) x 230mm(D) x 800mm(H). - Visual pilot lamp (12W DC) activated when doors not closed. - Transformer: AC/DC 240V - 12V DC.

Carts & Cabinets

149-CProduct type: All ModelsD.D.A./Poison Cabinet - Visual Alarm

103


[email protected]

www.mod

iezha

m.com

- Steel sheet constructed. - Twin lockable doors. - Fixed sheet metal shelves. - Inner lockable compartment for storage of poison. - Wall-mounted. - Finishing: Epoxy powder coated. - Size: 600mm(W) x 230mm(D) x 800mm(H). - Audio buzzer (12W DC) activated when inner compartment not closed. - Visual pilot lamp (12W DC) activated when doors not closed. - Transformer: AC/DC 240V - 12W DC.

Carts & Cabinets

149-DProduct type: All ModelsD.D.A./Poison Cabinet - Audio Visual Alarm

104


[email protected]

www.mod

iezha

m.com

- Steel sheet constructed. - 2 rows of storage for folders/�les at top. - Can accommodate up to 50 �les/folders (A4 size). - 3 nos. utility drawers, slots for x-ray �lm envelops. - Pushing handle at one end, collapsible shelf at the other. - Finishing: Epoxy powder coated. - Castors: 4 x 100mm grey rubber. - Size: 760mm(L) x 500mm(W) x 900mm(H).

Carts & Cabinets

156-AProduct type: All ModelsBHT Trolley (Bed Head Ticket Trolley) Patient Record File/Folder Trolley

105


[email protected]

www.mod

iezha

m.com

- Can accommodate 30 aluminium �les/folders arranged in 2 rows. - Tubular frame and steel sheet shelf & compartment. - Pushing handle. - Finishing: Epoxy powder coated. - Castors: 4 x 100mm grey rubber. - With or without aluminium folders.

Carts & Cabinets

156-BProduct type: All ModelsBHT Trolley (Bed Head Ticket Trolley) Patient Record File/Folder Trolley

106


[email protected]

www.mod

iezha

m.com

- Steel sheet constructed. - Finishing: Epoxy powder coated. - 2 sections: (a) Upper section with lockable doors and 3 adjustable shelves. (b) Lower section with lockable metal door and 2 �xed metal shelves. -Size: 600mm(W) x 400mm(D) x 1850mm(H).

Carts & Cabinets

159-AProduct type: All ModelsCabinet Instrument - Free Standing/2 Sections

107


[email protected]

www.mod

iezha

m.com

- Steel sheet constructed. - Finishing: epoxy powder coated. - Twin lockable glass doors. - Size: 750mm(W) x 400mm(D) x 1850mm(H).

Carts & Cabinets

159-BProduct type: All ModelsCabinet Instrument - Free-Standing c/w 5 Nos. Adjustable Glass Shelves

108


[email protected]

www.mod

iezha

m.com

- Steel sheet constructed. - Finishing: Epoxy powder coated. - Twin lockable glass doors. - adjustable glass shelves. - Size: 750mm(W) x 350mm(D) x 900mm(H).

Carts & Cabinets

159-CProduct type: All ModelsCabinet Instrument - Wall-Mounted c/w 3 Nos. Adjustable Glass Shelves

109


[email protected]

www.mod

iezha

m.com

- Complete stainless steel. - Twin heavy-duty hinged doors with security latches. - Pushing handles at both ends. - 2 nos. reinforced shelves. - Castors: 4 x 150mm heavy-duty grey rubber swivelling type. - Size: 1350mm(L) x 750mm(W) x 1500mm(H).

Carts & Cabinets170Product type: All ModelsStainless Steel Transfer Trolley C.S.S.D/T.S.S.U

110


[email protected]

www.mod

iezha

m.com

- Complete stainless steel material. - Cart top with 25mm-high bendup lips on 3 sides. - 5 drawers: (a) Top 3 drawers of size 550mm(W) x 450mm(D) x 75mm(H). (b) Fourth drawer of size 550mm(W) x 450mm(D) x 125mm(H). (c) Fifth drawer of size 550mm(W) x 450mm(D) x 300mm(H). Slide-up and retractable panel door. All drawers key-lockable with a central-locking mechanism. Top 3 drawers have removable partitioned tray.

- Accessories (a) All-round rubber bumper protection. (b) Retractable side utility shelf, cardiac board, pushing handle, 2 nos. utility shelves. (c) Tilt-out waste bin with concealed waste collection bag. (d) Castors: 4 x 125mm grey rubber type, diagonal 2 with brakes. (e) Overall size: 600mm(L) x 450mm(D) x 900mm(H).

Carts & Cabinets171Product type: All ModelsAnaesthetic/Resuscitation Cart

111


[email protected]

www.mod

iezha

m.com

Stands & Racks

- Tubular steel framework. - Finishing: epoxy powder coated. - 4-legged base mounted on 50mm swivelling castors. - c/w a chrome-plated double-hooked IV pole.

37-A-1Product type: All ModelsIV Transfusion/Drip Stand - Mobile (Irrigator Stand)

Stands & Racks

112


[email protected]

www.mod

iezha

m.com

- Tubular steel framework. - 5-legged heavy base mounted on 50mm swivelling castors. - Finishing: epoxy powder coated. - c/w a chrome-plated double-hooked IV drip pole. - Maximum height adjustment - 2.2 metres.

137-B-1Product type: All ModelsIV Transfusion/Drip Stand - (Irrigator Stand)

Stands & Racks

113


[email protected]

www.mod

iezha

m.com

- Complete stainless steel. - Castors: 5 x 50mm grey rubber.

137-B-2Product type: All ModelsIV Transfusion/Drip Stand (Irrigator Stand)

Stands & Racks

114


[email protected]

www.mod

iezha

m.com

- Mild steel rod - chrome-plated. - Adjustable height. - c/w clamp for attachment to bedside frame.

MODEL 137-C-2

MODEL 137-C-1

137-C-1Product type: All ModelsIV Drip Pole - Double-Hooked

Stands & Racks

115


[email protected]

www.mod

iezha

m.com

- Mild steel rod - chrome-plated. - Single-hooked, �xed height. - c/w clamp for attachment to wheelchair frame.

MODEL 137-C-2

MODEL 137-C-1

137-C-2Product type: All ModelsIV Drip Pole - Single-Hooked

Stands & Racks

116


[email protected]

www.mod

iezha

m.com

- Stand constructed of tubular mild steel. - Finishing: epoxy powder coated. - Castors: 4 x 50mm swivelling type. - c/w a multi-�exible lamp arm. - Voltage: 240V 50Hz. - Model VS 138-A: Standard 60-Watt bulb - 240V 50Hz. - Model VS 138-B: Halogen bulb - 240V 50Hz. - Model VS 138-C: c/w transformer, low heat 12V halogen lamp.

138Pduct type: All ModelsAngle Poise Lamp c/w Mobile Stand

138 - B 138 - B

Stands & Racks

117


[email protected]

www.mod

iezha

m.com

- Tubular steel framework - 7 legged. - Finishing: epoxy powder coated. - Castors: 50mm swivelling type. - c/w 4 pcs. blue curtain. - Size of each panel/fold: 560mm(W) x 1850mm(H).

142Product type: All ModelsWard Screen - Mobile 4-Fold c/w Individual Curtains

Stands & Racks

118


[email protected]

www.mod

iezha

m.com

- Mild steel construction. - Mobile on 2 units of 75mm castors. - Finishing: epoxy powder coated.

143-A 143-B 143-B

143-AProduct type: All ModelsOxygen Cylinder Trolley for 24cu.ft/0.7m3 Cylinder

Stands & Racks

119


[email protected]

www.mod

iezha

m.com

- c/w: (a) 0.7 litres �lled oxygen aluminium cylinder - pin index. (b) Flowmeter, regulator, humidi�er and adult face mask. (c) Mobile trolley.

143-A 143-B 143-A-C

143-A-CProduct type: All ModelsOxygen Resuscitation Unit

Stands & Racks

120


[email protected]

www.mod

iezha

m.com

- Tubular steel framework. - Finishing: epoxy powder coated. - Mobile on 2 units of 125mm rubber castors. - For cylinder capacities of: (a) Model VS 143-B-1: 48cu.ft - 1.4m3. (b) Model VS 143-B-2: 80cu.ft - 2.4m3. (c) Model VS 143-B-3: 120cu.ft - 3.4m3. (d) Model VS 143-B-4: 240cu.ft - 6.8m3.

143-A 143-B 143-A-C

Stands & Racks

143-BProduct type: All ModelsOxygen Cylinder Trolley

121


[email protected]

www.mod

iezha

m.com

- Complete stainless steel. - Castors: 4 x 75mm grey rubber. - c/w 2 nos. stainless steel basin - 360mm diameter x 100mm deep. - Model VS 144-A: (a) Tubular steel framework. (b) Finishing: epoxy powder coated.

Stands & Racks144-BProduct type: All ModelsBowl Stand - Single

122


[email protected]

www.mod

iezha

m.com

- Complete stainless steel frame. - Castors: 4 x 75mm grey rubber. - c/w 2 nos. stainless steel basin - 360mm diameter x 100mm deep. - Model VS 145-A-1: (a) Tubular mild steel frame. (b) Finishing: epoxy powder coated.

145-A-2Product type: All ModelsBowl Stand - Double/Side by Side

Stands & Racks

123


[email protected]

www.mod

iezha

m.com

- Tubular steel framework. - Finishing: epoxy powder coated. - Mobile on 4 units of 75mm rubber castors. - c/w 2 nos. stainless steel basin - 360mm diameter x 100mm deep. - Model VS 145-B-1: epoxy powder coated. - Model VS 145-B-2: complete stainless steel framework.

Stands & Racks

145-BProduct type: All ModelsBowl Stand - Double (Basin Stand - Double-decker)

124


[email protected]

www.mod

iezha

m.com

- Complete stainless steel. - Castors: 3 x 50mm grey rubber. - c/w a stainless steel basin - 360mm diameter x 100mm deep. - Height: 250mm. - Model VS 146-A-1: (a) Mild steel constructed frame. (b) Finishing: epoxy powder coated. (c) Castors: 3 x 50mm swivelling type.

Stands & Racks146-A-2Product type: All ModelsSoiled Swab Receptacle - Kickabout

125


[email protected]

www.mod

iezha

m.com

- Complete stainless steel. - Castors: 3 x 50mm grey rubber. - c/w a stainless steel basin - 13 litres.

Stands & Racks146-BProduct type: All ModelsSoiled Swab Receptacle - Kickbucket

126


[email protected]

www.mod

iezha

m.com

- Galvanised steel sheet construction. - Removable inner pail. - Finishing: epoxy powder coated. - Size: 280mm diameter x 400mm height. - Capacity: 13 litres.

Stands & Racks147-AProduct type: All ModelsFoot Pedal Sanitary Bin - Foot-Operated Lid

127


[email protected]

www.mod

iezha

m.com

- Tubular steel framework. - Finishing: epoxy powder coated. - Castors: 4 x 50mm swivelling type. - Model 150-A-1: Stainless steel tray - size: 425mm x 275mm. - Model 150-B-1: Stainless steel tray - size: 550mm x 330mm. - Model 150-A-2: Complete stainless steel framework. - Model 150-B-2: Complete stainless steel framework.

150Product type: All ModelsMayo Instrument Stand - Mobile Tray Arm Height Adjustable

Stands & Racks

128


[email protected]

www.mod

iezha

m.com

- Complete stainles steel. - Flat bar front. - Adjustable height. - Tray size: 550mm(L) x 330mm(W). - Castors: 2 x 75mm grey rubber.

Stands & Racks150-CProduct type: All ModelsStainless Steel Mayo Instrument Tray Stand

129


[email protected]

www.mod

iezha

m.com

- Tubular steel constructed framework. - Finishing: epoxy powder coated. - Castors: 4 x 75mm grey rubber. - 2 nos. canvas bags - removable with draw strings. - Bag size: 460mm diameter x 750mm deep. - Overall size: 920mm(L) x 500mm(W) x 850mm(H). - Model VS 152-B: Stainless steel framework.

Stands & Racks152-AProduct type: All ModelsDouble Soiled Linen Trolley c/w 2 Canvas Bags

130


[email protected]

www.mod

iezha

m.com

- Tubular steel constructed framework. - Finishing: epoxy powder coated. - Castors: 3 x 75mm grey rubber. - One canvas bag - removable with draw strings. - Bag size: 460mm diameter x 750mm deep. - Overall size: 460mm(L) x 850mm(H). - Model VS 153-B: Stainless steel frame.

153-AProduct type: All ModelsSingle Soiled Linen Trolley c/w 1Canvas Bag

Stands & Racks

131


[email protected]

www.mod

iezha

m.com

- Tubular steel constructed framework. - Finishing: epoxy powder coated. - Castors: 4 x 100mm grey rubber. - One canvas bag - removable with draw strings. - Bag size: 460mm diameter x 750mm deep. - c/w 3 shelves for clean linen storage and distribution. - Pushing handle at one end. - Size: 850mm(L) x 460mm(W) x 900mm(H). - Model VS 154-B: Stainless steel frame.

Stands & Racks154-AProduct type: All ModelsLinen Truck/Clean & Soiled Linen for Linen Changing Purposes

132


[email protected]

www.mod

iezha

m.com

- Tubular steel framework. - 4 nos. steel sheet constructed shelves - reinforced. - Finishing: epoxy powder coated. - Castors: 4 x 125mm grey rubber.

- Size: 1500mm(L) x 600mm(W) x 1650mm(H).

Stands & Racks161Product type: All ModelsTrolley Transport Linen - Distribution

133


[email protected]

www.mod

iezha

m.com

- Trolley constructed of stainless steel material. - Mounted on 4 units 100mm ball bearing grey rubber castors. - c/w a �breglass tank. - Tank size: 750mm(L) x 550mm(W) x 600mm(H).

- Tank can be either in red or blue.

Stands & Racks168Product type: All ModelsSoiled Linen Collection Trolley for Wet & Dirty Linen

134


[email protected]

www.mod

iezha

m.com

Stools & Chairs

- Tubular steel framework. - Finishing: epoxy powder coated. - Round revolving PVC-padded seat. - Screw height adjustment - 450mm to 600mm. - Castors: 4 x 50mm swivelling type. - Model VS 140-A-2: (a) Without castors. (b) 4 legs mounted on rubber studs.

140-A-1Product type: All ModelsSurgeon's Stool on Castors

135


[email protected]

www.mod

iezha

m.com

- Castors: 5 x 50mm swivelling type. - 300mm diameter PVC-padded seat. - Gas spring assisted revolving seat. - Height adjustment - 500mm to 600mm.

Stools & Chairs

140-A-GSProduct type: All ModelsSurgeon's Operating Stool

136


[email protected]

www.mod

iezha

m.com

- Screw height adjustment - 450mm - 600mm.

- Revolving seat. - Mobile base: 5 x 50mm swivelling castors.

Stools & Chairs140-B-1Product type: All ModelsSurgeon's Operating Stool c/w Backrest/5-Legged Aluminium Base

137


[email protected]

www.mod

iezha

m.com

- Gas spring assisted height adjustment - 500mm to 600mm. - Revolving seat. - Mobile base - 5 x 50mm swivelling castors.

Stools & Chairs140-B-2Product type: All ModelsSurgeon's Operating Stool c/w Backrest/5-Legged Aluminium Base

138


[email protected]

www.mod

iezha

m.com

- High back with lumbar support. - Armrest - padded. - Vinyl PVC-padded - green. - Mild steel frame - chrome-plated. - Low seat - 400mm(H).

Stools & Chairs140-B-3Product type: All ModelsGeriatric Chair

139


[email protected]

www.mod

iezha

m.com

- Fully Reclinable To 120 Degree - Padded With Vinyl P.U. Upholstry - Blue Colour - Easy One Person Operation - Extended Leg-Rest When Reclined

- OPTIONAL Mobile On 4 Units 50mm Grey Rubber Wheel

Stools & Chairs140-B-4Product type: All ModelsReclinable Arm-Chair ( For Dialysis Patient )

140


[email protected]

www.mod

iezha

m.com

- Screw height adjustable revolving round seat - 700mm to 800mm. - c/w: (a) Footrest. (b) 5-legged epoxy coated steel base. (c) Mobile on 5 x 50mm swivelling castors.

Stools & Chairs

141-A-1Product type: All ModelsLab/Dispensing Stool

141


[email protected]

www.mod

iezha

m.com

- Gas spring assisted adjustable round revolving seat - 700mm to 800mm. - c/w: (a) Footrest. (b) 5-legged epoxy coated steel base. (c) Mobile on 5 x 50mm swivelling castors.

Stools & Chairs

41-A-2Product type: All ModelsLab/Dispensing Stool

142


[email protected]

www.mod

iezha

m.com

- Screw height adjustable revolving seat with backrest - 700mm to 800mm. - c/w: (a) Footrest. (b) 5-legged epoxy coated steel base. (c) Mobile on 5 x 50mm swivelling castors.

Stools & ChairsStools & Chairs

141-B-1Product type: All ModelsLab/Dispensing Stool

143


[email protected]

www.mod

iezha

m.com

- Gas spring assisted adjustable revolving seat with backrest - 700mm to 800mm. - c/w: (a) Footrest. (b) 5-legged epoxy coated steel base. (c) Mobile on 5 x 50mm swivelling castors.

Stools & Chairs

141-B-2Product type: All ModelsLab/Dispensing Stool

144


[email protected]

www.mod

iezha

m.com

- Mild steel constructed. - Epoxy powder coated. - PVC-padded step top. - Castors: 4 x 50mm swivelling type.

Stools & Chairs

147-BProduct type: All ModelsKick-Step Stool

145


[email protected]

www.mod

iezha

m.com

- Mobile on 4 x 75mm grey rubber castors, rear 2 with brakes. - c/w: (a) Seat with cover. (b) Bracket to hold and adult bedpan. (c) Backrest, armrest and legrest.

Stools & Chairs

175Product type: All ModelsStainless Steel Commode/Shower Chair

146


[email protected]

www.mod

iezha

m.com

Accessories

- 2 nos. rounded wooden poles with hand grips. - 2 nos. epoxy-coated steel traverse bars. - 1 no. beige canvas (1850mm x 560mm). Overall size: 1980mm(L) x 560mm(W).

Optional: (a) Model VS 139-A: Aluminium poles complete with hand grips.

139Product type: All ModelsCanvas Stretcher c/w Wooden Poles

147


[email protected]

www.mod

iezha

m.com

- Tubular steel framework. - Finishing: epoxy powder coating. - 4-legged, mounted on top of non-slip rubber studs. - 4 elevated positions.

Accessories

162Product type: All ModelsBed Elevator for All Standard Steel Frame Bedstead

148


[email protected]

www.mod

iezha

m.com

- Tubular steel framework. - Finishing: epoxy powder coating. - Castors: 4 x 50mm swivelling type. - Size: 400mm(L) x 380mm(W) x 400mm(H).

Accessories164Product type: All ModelsTrolley for Suction Pump

149


[email protected]

www.mod

iezha

m.com

- Trolley: Constructed of tubular steel frame. - Finishing: epoxy powder coating. - Castors: 4 x 125mm grey rubber type. - A canvas stretcher with rounded wooden poles, steel traverse bars and beige canvas. - Size: 1980mm(L) x 560mm(W) x 800mm(H).

Accessories

166Product type: All ModelsCanvas Stretcher c/w Transfer Trolley

150


[email protected]

www.mod

iezha

m.com

- Blue PVC sling bag. - Fixed compartments and carrying handle. - Size: 300mm(L) x 250mm(W) x 150mm(D).

167Product type: All ModelsMidwifery Bag for House Calls

Accessories

151


[email protected]

www.mod

iezha

m.com

- Trolley constructed of stainless steel material. - Mounted on 4 units of 100mm ball rubber castors. - Removable stainless steel drip pan.

Accessories

169Product type: All ModelsSwab Counting Rack c/w 40 Hooks Arranged in 4 Row

152


[email protected]

www.mod

iezha

m.com

- Mild steel construction. - Epoxy powder coating. - Mobile on 4 units of 100mm grey rubber castors, diagonal 2 with brakes. - Unica Bins (a) Small size: 6 nos. approx. 750mm(W) x 150mm(D) x 60mm(H). (b) Medium size: 12 nos. approx. 100mm(W) x 175mm(D) x 75mm(H). (c) Large size: 12 nos. approx. 150mm(W) x 200mm(D) x 100mm(H). Overall size: 920mm(W) x 1600mm(H).

173Product type: All ModelsRack for Pharmacy Use c/w Organising Bins

Accessories

153


[email protected]

www.mod

iezha

m.com

- Wall-mounted model. - Capacity: - (a) 8 nos. bed pans. - (b) 7 nos. urinals. - Removable drip pan.

174-AProduct type: All ModelsStainless Steel Bed Pan/Urinary Rack

Accessories

154


[email protected]

www.mod

iezha

m.com

- Mobile stand with 4 x 100mm grey rubber castors. - Capacity: (a) 10 nos. bed pans. (b) 10 nos. urinals. Removable drip pan.

174-BProduct type: All ModelsStainless Steel Bed Pan/Urinal Rack

Accessories

155


[email protected]

www.mod

iezha

m.com

hospital equipment catalogue

Health & Medicine