fittings · 2021. 1. 15. · Ÿ dimensions : mss sp-79, 3799, 97, 95, 83, asme 16.11, mss sp-95, bs...
TRANSCRIPT
FITTINGS
9/A, 9th Floor, Mehta Mehal, 15th Mathew Road, Opera House, Charni Road, Mumbai - 400 004, India.
web: www.aesteiron.com email: [email protected]
Tel: +91-22-67776700 - 6799 - 6777
ABOUT US:
'AESTEIRON Steels LLP' is a leading manufacturing and distribution house dealing in various steel products such as stainless steel, carbon steel, alloy-steel, nickel & special metals alloys. Our offered products are widely valued for their excellent design and finishing, sturdiness and cost effectiveness. Equipped with an experience of over 4 decades in industrial steel & executing over 100 large projects satisfactorily, 'AESTEIRON Steels LLP' has emerged as a leading producer of pipes & pipes fittings that are quality certified by TUV Rheinland (INDIA) , PED & ISO 9001 : 2015.
'AESTEIRON Steels LLP' commenced its journey back in the year 2007. AESTEIRON ensures that it delivers the best quality products through continuous testing based on new & current industry standards along with harnessing modern up to date techniques. Our product line embodies the highest standard in terms of productivity and reliability.
Our prices are competitive and our products are procured from certified vendors who have a great reputation in the market and provides quality standard products.
'AESTEIRON Steels LLP' being a client focused company - we at Aesteiron deeply value our client's needs and expectations. This has been evident with the growing consumer base over the years as we 'AESTEIRON Steels LLP' being a client focused consistently strive to enrich our customer experience.
For more information on the types and material of industrial fittings we have to offer, you can visit our website - www.aesteiron.com and find the specific details under the Products section > Pipe fittings.
In case there arises a need help in identifying the product range that we have to offer and which fittings best suits your application, feel free to contact us.
DISCLAIMER :
While the Specifications contained herein are compiled from credible & realiable industry sources, AESTEIRON STEELS LLP, however does not guarantee the accuracy of the information contained in this handbook. We also cannot guarantee that the information contained in this handbook is free typographical error or any other error. Readers are requested not to rely exclusively on the information contained in this handbook.
[email protected] www.aesteiron.com 1
AESTEIRON (STEELS) FITTINGS
CONTENT
BUTT-WELD FITTINGS
ASME B16.9/MSS SP-75 Elbows Dimensions
ASME B16.9/MSS SP-75 Tees Dimensions
ASME B16.9/MSS SP-75 Reducers Dimensions
ASME B16.9/MSS SP-75 Caps Dimensions
ASME B16.9/MSS SP-433 Lap-Joint Stub Ends Dimensions
ASME B16.9/MSS SP-75 Manifold Fittings Dimensions
ASME B16.9/MSS SP-28 Tolerances Dimensions
ASME B16.9/B16.28(mm) MSS SP-75 Bevel Types
ASME B16.9/MSS Sp75 Weight Dimensions
FORGED FITTINGS
ASME B16.11 Elbows Dimensions
ASME B16.11 Tees Dimensions
ASME B16.11 Reducers Dimensions
ASME B16.11 Bushing Dimensions
ASME B16.11 Caps Dimensions
ASME B16.11 Crosses Dimensions
ASME B16.11 Couplings Dimensions
ASME B16.11 Plugs Dimensions
ASME B16.11/BS 3799 Pipe Nipples Dimensions
BS 3799 Unions Dimensions
ASME B16.11/BS 3799 Swage Nipples
ASME B16.11/BS 3799 Bosses
ASME B1.20.1 Taper Pipe Threads, NPT
ASME B16.11 Weight of Fittings
3 - 12
13 - 19
20 - 24
25- 26
27 - 28
29 - 30
31 - 32
33
34 - 46
47 - 51
52 - 53
54
55
56 - 57
58 - 59
60 - 61
62
63
64 - 65
66
67
68
69 - 71
[email protected] www.aesteiron.com2
A
A
T ID
OD
T
B
B
ID
OD
45°90°
ASME B16.9 MSS SP-75
NB O.D. at Bevel A (mm) B (mm) NB O.D. at Bevel A (mm) B (mm)
1/2 21,3 38,1 15,9
3/4 26,7 38,1 19,1
1 33,4 38,1 22,2
1 1/4 42,2 47,6 25,4
1 1/2 48,3 57,2 28,6
2 60,3 76,2 34,9
2 1/2 73,0 95,3 44,5
3 88,9 114,3 50,8
3 1/2 101,6 133,4 57,2
4 114,3 152,4 63,5
5 141,3 190,5 79,4
6 168,3 228,6 95,3
8 219,1 304,8 127,0
10 273,1 381,0 158,7
12 323,9 457,2 190,5
14 355,6 533,4 222,3
16 406,4 609,6 254,0 16 406,4 609,6 254,0
18 457,2 685,8 285,8 18 457,2 685,8 285,8
20 508,0 762,0 317,5 20 508,0 762,0 317,5
22 558,8 838,2 342,9 22 558,8 838,2 342,9
24 609,6 914,4 381,0 24 609,6 914,4 381,0
26 660,4 990,6 406,4 26 660,4 990,6 406,4
28 711,2 1066,8 438,2
30 762,0 1143,0 469,9 30 762,0 1143,0 469,9
32 812,8 1219,2 501,7
34 863,6 1295,4 533,4 34 863,6 1295,4 533,4
36 914,4 1371,6 565,2 36 914,4 1371,6 565,2
38 965,2 1447,8 600,1 38 965,2 1447,8 600,1
40 1016,0 1524,0 631,8 40 1016,0 1524,0 631,8
42 1066,8 1600,2 660,4 42 1066,8 1600,2 660,4
44 1117,6 1676,4 695,3 44 1117,6 1676,4 695,3
46 1168,4 1752,6 727,1 46 1168,4 1752,6 727,1
48 1219,2 1828,8 758,8 48 1219,2 1828,8 758,8
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
LONG RADIUS ELBOWS
[email protected] www.aesteiron.com 3
Uses of SR elbow and Carbon steel LR:
LR - Long radius, SR - Short radius [For the sake of brevity]
In tight areas SR elbows are used while LR elbows is used in basic normal working conditions.When it is scoured LR is highly recommended.The welding is reduced by more than 1/3rd by the reducing type elbow.
Common carbon steel pipe elbows:[1] 90 degree Carbon steel elbow [2] 45 degree Carbon steel elbow[3] Carbon Steel Long Radius Elbow [4] Carbon Steel Short Radius Elbow
General Note: Please note that all bends are elbows but all elbows are not bends."End Connections of Carbon Steel Buttweld Elbow:For connecting elbows/ bend to pipe the following type of end connections are required
Ÿ Butt welded: Used along with large bore (>=2 inch) pipingŸ Socket welded: Used along with pipe sizeŸ ScrewedŸ Flanged
Long radius elbow 1.5d:Long radius Elbow [90 degrees]
Long radius Elbow
Key words : ASME B16.9 1.5D Elbow Manufacturers in India, ASTM A 234 Carbon Steel 1.5D Elbow, ASME SA403 ASTM A403 Stainless steel 1.5D Elbow in India, 1.5D Elbow , ASME B16.9 1.5D Elbow Exporters India , Alloy Steel 1.5D Elbow
1.5D Steel Pipe Elbow [Production range]Ÿ Outside Diameter [OD] : Seamless Pipe Bends (1/2" – 24"), ERW / Welded / Fabricated Pipe Bends (2" – 36")Ÿ Wall Thickness [WT] : 3mm-40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, XS, SCH60, SCH80, SCH120, SCH140,
SCH160, XXSŸ Elbow [E] : R=1D Elbow , 2D Elbow, 3D Elbow, 5D Elbow, 6D Elbow, 8D Elbow, 10D Elbow or CustomŸ Radius for bending : R=1D Bend , 2D Bend, 3D Bend, 5D Bend, 6D Bend, 8D Bend, 10D Bend or CustomŸ Angle of product : 0° – 180°Ÿ 1.5D Elbow Production Grades : Duplex, Stainless Steel, Alloy Steel, Nickel Alloys, Low temperature Steel, Carbon SteelŸ Value Added Services provided : Threading, Soldering, Electro Polish, Epoxy & FBE Coating, Sand blasting, Hot Dipped
Galvanizing
1.5D Elbow Standards for ManufacturingŸ ASME Standards : ANSI B16.9, ANSI B16.28, MSS-SP-43Ÿ DIN Standards : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011Ÿ EN Standards : EN10253-1, EN10253-2Ÿ Under ASTM A403 – ASME SA403 : Standard Specification for Wrought Austenitic Stainless Steel Piping FittingsŸ Under ASME B16.9 : Factory-Made Wrought Fittings Butt weldingŸ Under ASME B16.25 : Butt welding Ends ASME B16.28 – Wrought Steel Short Radius Elbows and Butt welding ReturnsŸ Under MSS SP-43 : Wrought and Fabricated Butt-Welding Fittings for the purpose of application of Corrosion resistant
and Low Pressure.
Elbow 1.5D Material Grades :Ÿ Stainless Steel 1.5D Elbow Grades : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904LŸ Carbon Steel 1.5D Elbow Grades : WPHY 52, ASTM A 234 WPB , WPHY 42, WPBW, WPHY 46, WPH 60, WPHY 65 & WPHY 70.Ÿ Low Temperature Carbon Steel 1.5D Elbow Grades : ASTM A420 WPL3, A420 WPL6Ÿ Alloy Steel 1.5D Elbow Grades : WP 22, WP 91, ASTM / ASME A/SA 234 Gr. WP 1, WP 11, WP 12, WP 5, WP 9, Ÿ Duplex Steel 1.5D Elbow Grades : ASTM A 815, S32205. Werkstoff No. 1.4462, ASME SA 815 UNS NO S31803,Ÿ Nickel Alloy 1.5D Elbow : UNS 8825 INCONEL (825), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), UNS 6600
(INCONEL 600), UNS 4400 (MONEL 400), UNS 8020 (ALLOY 20 / 20 CB 3, UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), ASTM / ASME SB 336 UNS 2200 (NICKEL 200)
[email protected] www.aesteiron.com4
Key words : Alloy Steel Buttweld 90 Deg Short Radius Elbow, ASTM A403 ASME SA403 Stainless Steel Butt-weld 90 Deg Short Radius Elbow, Buttweld 90 Deg Short Radius Elbow, ASME B16.9 Buttweld 90 Deg Short Radius Elbow Manufacturers Exporters India, ASTM A 234 Carbon Steel Butt-weld 90 Deg Short Radius Elbow
Short Radius Elbow Production Range [ Steel Pipe 90 Deg ]Ÿ Outside Diameter [OD] : Seamless Pipe Bends (1/2" – 24"), ERW / Welded / Fabricated Pipe Bends (2" – 36")Ÿ Wall Thickness [WT] : 3mm-40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, XS, SCH60, SCH80, SCH120, SCH140,
SCH160, XXSŸ Elbow : 3D Elbow, 5D Elbow, 6D Elbow, R=1D Elbow , 2D Elbow, 8D Elbow, 10D Elbow or CustomŸ Bending Radius : R=1D Bend , 5D Bend, 6D Bend, 8D Bend, 2D Bend, 3D Bend, 10D Bend or CustomŸ Product Angle : 0° – 180°Ÿ 90 Deg Short Radius Elbow Production Grades : Nickel Alloys, Low temperature Steel, Carbon Steel, Stainless Steel, Alloy
Steel, Duplex, Cupro NickelŸ Value Added Services : Sand Blasting, Threading, Soldering, Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish
Short Radius Elbow Standards for Manufacturing [90 Degrees]Ÿ ASME Standards : ANSI B16.9, ANSI B16.28, MSS-SP-43Ÿ DIN Standards : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011Ÿ EN Standards : EN10253-1, EN10253-2Ÿ Under ASTM A403 : ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping FittingsŸ Under ASME B16.9 : Factory-Made Wrought Fittings Butt-weldingŸ Under ASME B16.25 : Butt-welding Ends ASME B16.28 – Wrought Steel Short Radius Elbows and Buttwelding ReturnsŸ Under MSS SP-43 : Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications
90 Deg Short Radius Elbow Material GradesŸ 90 Degree Short Radius Elbow Stainless Steel: ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904LŸ 90 Deg Short Radius Elbow for carbon steel : ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65
& WPHY 70.Ÿ Low Temperature Carbon Steel 90 Degree Short Radius Elbow : ASTM A420 WPL3, A420 WPL6Ÿ 90 Degree Short Radius Elbow Alloy Steel: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 12, WP 22, WP 91, WP 9, WP 11 Ÿ Duplex Steel 90 Degree Short Radius Elbow : ASTM A 815, ASME SA 815 UNS NO S31803, S32205.Ÿ Nickel Alloy 90 Degree Short Radius Elbow : UNS 4400 (MONEL 400), UNS 6600 (INCONEL 600), UNS 6601 (INCONEL
601), UNS 8020 (ALLOY 20 / 20 CB 3, UNS 2201 (NICKEL 201), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), ASTM / ASME SB 336 UNS 2200 (NICKEL 200), UNS 8825 INCONEL (825)
Short radius elbow [90 degrees]
45 Degrees Long Radius ElbowKey words : 45 Deg Short Elbow, 45 deg elbow dimensions short radius 45 degree, 45 degree Elbow Center, 45 degree elbow equivalent length, 45 degree exhaust elbow.
Steel Pipe 45° Long Radius Elbow Production RangeŸ Outside Diameter[OD] : Seamless Pipe Bends (1/2" – 24"), ERW / Welded / Fabricated Pipe Bends (2" – 36")Ÿ Wall Thickness[WT] : 3mm-40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, XS, SCH60, SCH80, SCH120, SCH140,
SCH160, XXSŸ Elbow : R=1D Elbow , 2D Elbow, 3D Elbow, 5D Elbow, 6D Elbow, 8D Elbow, 10D Elbow or CustomŸ Bending Radius : R=1D Bend , 2D Bend, 3D Bend, 5D Bend, 6D Bend, 8D Bend, 10D Bend or CustomŸ Product Angle : 0°–180°Ÿ 45° Long Radius Elbow Production Grades : Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low temperature Steel,
Carbon Steel, Cupro NickelŸ Value Added Services : Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering
45° Long Radius Elbow Manufacturing StandardsŸ ASME : ANSI B16.9, ANSI B16.28, MSS-SP-43Ÿ DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011Ÿ EN : EN10253-1, EN10253-2Ÿ ASTM A403 : ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping FittingsŸ ASME B16.9 : Factory-Made Wrought Fittings ButtweldingŸ ASME B16.25 : Buttwelding Ends ASME B16.28 – Wrought Steel Short Radius Elbows and Buttwelding ReturnsŸ MSS SP-43 : Wrought and Fabricated Butt - Welding Fittings for Low Pressure, Corrosion Resistant Applications
[email protected] www.aesteiron.com 5
45° Long Radius Elbow Material GradesŸ Stainless Steel 45° Long Radius Elbow : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904LŸ Carbon Steel 45° Long Radius Elbow : ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 &
WPHY 70.Ÿ Low Temperature Carbon Steel 45° Long Radius Elbow : ASTM A420 WPL3, A420 WPL6Ÿ Alloy Steel 45° Long Radius Elbow : ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91Ÿ Duplex Steel 45° Long Radius Elbow : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Werkstoff No. 1.4462Ÿ Nickel Alloy 45° Long Radius Elbow : ASTM / ASME SB 336 UNS 2200 (NICKEL 200), UNS 2201 (NICKEL 201), UNS 4400
(MONEL 400), UNS 8020 (ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276)
45 Degrees Short Radius Elbow
Key words : ASME B16.9 Manufacturers Exporters India, ASTM A 234 Carbon Steel , Buttweld 45 deg Short Radius Elbow , ASTM A403 ASME SA403 Stainless Steel
Short Radius Elbow Production Range [45 Degrees steel pipe]Ÿ Outside Diameter[OD] : Seamless Pipe Bends (1/2" – 24"), ERW / Welded / Fabricated Pipe Bends (2" – 36")Ÿ Wall Thickness[WT] : 3mm-40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, XS, SCH60, SCH80, SCH120, SCH140,
SCH160, XXSŸ Elbow : R=1D Elbow , 2D Elbow, 3D Elbow, 5D Elbow, 6D Elbow, 8D Elbow, 10D Elbow or CustomŸ Bending Radius : R=1D Bend , 6D Bend, 8D Bend, 2D Bend, 3D Bend, 5D Bend, 10D Bend or CustomŸ Product Angle : 0° – 180°Ÿ 45° Short Radius Elbow Production Grades : Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Carbon SteelŸ Value Added Services : Sand Blasting, Threading, Epoxy & FBE Coating, Electro Polish, Soldering, Hot Dipped Galvanizing,
45 degrees Short Radius Elbow Standards for Manufacturing Ÿ ASME Standard : ANSI B16.9, ANSI B16.28, MSS-SP-43Ÿ DIN Standard : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011Ÿ EN Standard : EN10253-1, EN10253-2Ÿ Under ASTM A403 : ASME SA403 Ÿ Under ASME B16.9 : Factory-Made Wrought Fittings ButtweldingŸ Under ASME B16.25 : Buttwelding EndsŸ ASME B16.28 : Wrought Steel Short Radius Elbows and Buttwelding ReturnsŸ Under MSS SP-43 : Wrought andŸ Fabricated Butt : Welding Fittings for the purpose of applications of Low Pressure & Corrosion Resistant 45° Short Radius Elbow Material Grades 45 degreesŸ Stainless Steel 45 degrees Short Radius Elbow : 309, 310, 316, 316L, 317L, ASTM A403 WP Gr. 304, 304H, 321, 347, 904LŸ Carbon Steel 45degrees Short Radius Elbow : WPHY 46, WPHY 52, WPH 60, ASTM A 234 WPB , WPBW, WPHY 42, WPHY 65
& WPHY 70.Ÿ Low Temperature Carbon Steel 45° Short Radius Elbow : ASTM A420 WPL3, A420 WPL6Ÿ Alloy Steel 45° Short Radius Elbow : WP 5, WP 9, WP 11, WP 12, ASTM / ASME A/SA 234 Gr. WP 1, WP 22, WP 91Ÿ Duplex Steel 45° Short Radius Elbow : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Werkstoff No. 1.4462Ÿ Nickel Alloy 45 degrees Short Radius Elbow : UNS 2201 (NICKEL 201), UNS 6625 (INCONEL 625), UNS 8020 (ALLOY 20 /
20 CB 3, UNS 8825 INCONEL (825), UNS 4400 (MONEL 400), UNS 6600 (INCONEL 600), UNS 6601 (INCONEL 601), ASTM / ASME SB 336 UNS 2200 (NICKEL 200 ), UNS 10276 (HASTELLOY C 276)
[email protected] www.aesteiron.com6
180 Degrees Long Radius Elbow
Key words : Alloy Steel Buttweld 180 Deg Elbow, ASTM A 234 Carbon Steel Buttweld 180 Deg Elbow, Buttweld 180 Deg Elbow, ASTM A403 ASME SA403 Stainless Steel Buttweld 180 Deg Elbow, ASME B16.9 Buttweld 180 Deg Elbow Manufacturers Exporters India
Long Radius Elbow Production Range [Steel pipe 180 degrees]Ÿ Outside Diameter[OD] : Seamless Pipe Bends (1/2" – 24"), ERW / Welded / Fabricated Pipe Bends (2" – 36")Ÿ Wall Thickness[WT] : 3mm-40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, XS, SCH60, SCH80, SCH120, SCH140,
SCH160, XXSŸ Elbow : R=1D Elbow , 2D Elbow, 3D Elbow, 5D Elbow, 6D Elbow, 8D Elbow, 10D Elbow or CustomŸ Bending Radius : R=1D Bend , 2D Bend, 3D Bend, 5D Bend, 6D Bend, 8D Bend, 10D Bend or CustomŸ Product Angle : 0° – 180°Ÿ 180° Long Radius Elbow Production Grades : Nickel Alloys, Carbon Steel, Stainless Steel, Alloy Steel, Duplex, Ÿ Value-Added Services provided : Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering, Hot Dipped
Galvanizing
180° Long Radius Elbow Standards for ManufacturingŸ Under ASME Standard : ANSI B16.9, ANSI B16.28, MSS-SP-43Ÿ DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011Ÿ EN : EN10253-1, EN10253-2Ÿ Under ASTM A403 Standard : ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping
FittingsŸ Under ASME B16.9 Standard : Factory-Made Wrought Fittings ButtweldingŸ Under ASME B16.25 Standard : Buttwelding Ends ASME B16.28 – Wrought Steel Short Radius Elbows and Buttwelding
ReturnsŸ Under MSS SP-43 Standard : Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant
Applications
180 degrees Long Radius Elbow Material GradesŸ Stainless Steel 180 degrees Long Radius Elbow : ASTM A403 WP Gr. 304, 321, 304H, 309, 347, 904L, 317L, 310, 316,
316L, Carbon Steel 180° Long Radius Elbow: WPHY 42, WPHY 46, & WPHY 70., ASTM A 234 WPB ,WPHY 52, WPH 60, WPHY 65, WPBW.
Ÿ Alloy Steel 180° Long Radius Elbow : WP 9, WP 11, WP 12, WP 22,WP 5, WP 91 ASTM / ASME A/SA 234 Gr. WP 1 Ÿ Long Radius Elbow duplex Steel 180 degrees : ASME SA 815 UNS NO S31803, S32205. Werkstoff No. 1.4462, ASTM A 815Ÿ Nickel Alloy 180° Long Radius Elbow : UNS 6600 (INCONEL 600 ), UNS 6625 (INCONEL 625), UNS 6601 (INCONEL 601),
UNS 8020 (ALLOY 20 / 20 CB 3, ASTM / ASME SB 336 UNS 2200 (NICKEL 200), UNS 8825 INCONEL (825), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), UNS 4400 (MONEL 400)
180 Degrees Short Radius Elbow
Key words : ASME B16.9 180 Deg Short Elbow Manufacturers and Exporters India, ASTM A403 ASME SA403 Stainless Steel 180 Deg Short Elbow, 180 Deg Short Elbow, ASTM A 234 Carbon Steel 180 Deg Short Elbow, Alloy Steel 180 Deg Short Elbow
Short Radius Elbow Production Range Steel Pipe 180 degreesŸ Outside Diameter[OD] : Seamless Pipe Bends (1/2" – 24"), ERW / Welded / Fabricated Pipe Bends (2" – 36")Ÿ Wall Thickness[WT] : 3mm-40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, XS, SCH60, SCH80, SCH120, SCH140,
SCH160, XXSŸ Elbow : R=1D Elbow , 2D Elbow, 3D Elbow, 5D Elbow, 6D Elbow, 8D Elbow, 10D Elbow or CustomŸ Bending Radius : R=1D Bend , 2D Bend, 3D Bend, 5D Bend, 6D Bend, 8D Bend, 10D Bend or CustomŸ Product Angle : 0° – 180°Ÿ 180° Short Radius Elbow Production Grades : Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Carbon SteelŸ Value Added Services : Sand Blasting, Threading, Soldering, Electro Polish, Epoxy & FBE Coating
[email protected] www.aesteiron.com 7
180° Short Radius Elbow Standards for Manufacturing Ÿ Under ASME Standard : ANSI B16.9, ANSI B16.28, MSS-SP-43Ÿ DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011Ÿ EN : EN10253-1, EN10253-2Ÿ Under ASTM A403 Standard : ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping
FittingsŸ Under ASME B16.9 Standard : Factory-Made Wrought Fittings ButtweldingŸ Under ASME B16.25 Standard : Buttwelding Ends ASME B16.28 – Wrought Steel Short Radius Elbows and Buttwelding
ReturnsŸ MSS SP-43 : Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications
180 degrees Short Radius Elbow Material GradesŸ Stainless Steel 180° Short Radius Elbow : 316, 316L, ASTM A403 WP Gr. 304, 304H, 309, 317L, 321, 347, 904L, 310, Ÿ Carbon Steel 180° Short Radius Elbow : ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 &
WPHY 70.Ÿ Alloy Steel 180° Short Radius Elbow : ASTM / ASME A/SA 234 Gr. WP 1, WP 11, WP 12, WP 22, WP 91, WP 5, WP 9Ÿ Duplex Steel 180° Short Radius Elbow : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Werkstoff No. 1.4462Ÿ Nickel Alloy 180° Short Radius Elbow : UNS 6600 (INCONEL 600), UNS 4400 (MONEL 400), UNS 8020 (ALLOY 20 / 20 CB 3,
UNS 8825 INCONEL (825), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 2200 (NICKEL 200 ), ASTM / ASME SB 336 UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201)
[email protected] www.aesteiron.com8
K
O
ID
OD
T
180°
ASME B16.9
NB O.D. at Bevel O (mm) K (mm)
1/2 21,3 76,2 47,6
3/4 26,7 57,2 or 76,2 42,9 or 50,8
1 33,4 76,2 55,6
1 1/4 42,2 95,3 69,9
1 1/2 48,3 114,3 82,6
2 60,3 152,4 106,4
2 1/2 73,0 190,5 131,8
3 88,9 228,6 158,8
3 1/2 101,6 266,7 184,2
4 114,3 304,8 209,6
5 141,3 381,0 261,9
6 168,3 457,2 312,7
8 219,1 609,6 414,3
10 273,1 762,0 514,5
12 323,9 914,4 619,1
14 355,6 1066,8 711,2
16 406,4 1219,2 812,8
18 457,2 1371,6 914,4
20 508,0 1524,0 1016,0
22 558,8 1676,4 1117,6
24 609,6 1828,8 1219,2
BUTT-WELD FITTINGSASME B16.9
LONG RADIUS BENDS
[email protected] www.aesteiron.com
Long Radius Bend specification:
Standards : AMSE/ANSI - ANSI B16.9, ASME B16.28, ASTM A403 / ASME SA403, MSS SP-43
DIN : DIN265, DIN2615, DIN28011, DIN2616, DIN 2617
EN : EN10253-1, EN10253-2
9
ASME B16.28 (mm)
NB O.D. at Bevel D Centtre to End A
90°
A
A
T ID
OD
1 33,40 25,40
1 1/4 42,16 31,75
1 1/2 48,26 38,10
2 60,33 50,80
2 1/2 73,03 63,50
3 88,90 76,20
3 1/2 101,60 88,90
4 114,30 101,60
5 141,30 127,00
6 168,28 152,40
8 219,08 203,20
10 273,05 254,00
12 323,85 304,80
14 355,60 355,60
16 406,40 406,40
18 457,20 457,20
20 508,00 508,00
22 558,80 558,80
24 609,60 609,60
BUTT-WELD FITTINGSASME B16.28
SHORT RADIUS ELBOWS
[email protected] www.aesteiron.com
Short Radius Bend:
ASME : MSS-SP-43, ANSI B16.9, ANSI B16.28, MSS-SP-43
DIN : DIN28011, DIN2616, DIN2615, DIN2605, DIN2617
EN : EN10253-1, EN10253-2
10
K
O
ID
OD
T
ASME B16.28 (mm)
NB O.D. at Bevel D Centtre to End O Centtre to End K
1 33,40 50,80 41,28
1 1/4 42,16 63,50 52,39
1 1/2 48,26 76,20 61,91
2 60,33 101,60 80,96
2 1/2 73,03 127,00 100,01
3 88,90 152,40 120,65
3 1/2 101,60 177,80 139,70
4 114,30 203,20 158,75
5 141,30 254,00 196,85
6 168,28 304,80 236,54
8 219,08 406,40 312,74
10 273,05 508,00 390,53
12 323,85 609,60 466,73
14 355,60 711,20 533,40
16 406,40 812,80 609,60
18 457,20 914,40 685,80
20 508,00 1016,00 762,00
22 558,80 1117,60 838,20
24 609,60 1219,20 914,40
BUTT-WELD FITTINGSASME B16.28
SHORT RADIUS 180° RETURNS
[email protected] www.aesteiron.com 11
Diameter ND (mm) 3D (mm) 5D (mm)
D
3D
D
5D
3D BEND 5D BEND
2 50,4 151,2 252
3 76,2 228,6 381
4 101,6 304,8 508
5 127 381 635
6 152,4 457,2 762
8 203,2 609,6 1016
10 254 762 1270
12 304,8 914,4 1524
BUTT-WELD FITTINGSASME B16.9/ASME B16.28
3D AND 5D BEND
[email protected] www.aesteiron.com
3D and 5D bends:
For Pipework NB 5D elbow - Centre Line 3D elbow - Centre Line Line Thickness
1" 127 n/a 3.3
1.1/2" 191 114 3.3
2" 254 152 3.3
3" 381 229 3.3
4" 508 305 4.5
Inch. mm mm mm mm
25
40
50
80
100
12
ASME B16.9 MSS SP-75
NB O.D. at Bevel C (mm) M (mm) NB O.D. at Bevel C (mm) M (mm)
1/2 21,3
3/4 26,7
1 33,4
1 1/4 42,2
1 1/2 48,3
2 60,3
2 1/2 73,0
3 88,9
3 1/2 101,6
4 114,3
5 141,3
6 168,3
8 219,1
10 273,1
12 323,9
14 355,6
16 406,4
18 457,2
20 508,0
22 558,8
24 609,6
26 660,4
28 711,2
30 762,0
32 812,8
34 863,6
36 914,4
38 965,2
40 1016,0
42 1066,8
44 1117,6
46 1168,4
48 1219,2
ID
OD
OD ID
T
T
C C
M
25,4 25,4
28,6 28,6
38,1 38,1
47,6 47,6
57,2 57,2
63,5 63,5
76,2 76,2
85,7 85,7
95,3 95,3
104,8 104,8
123,8 123,8
142,9 142,9
177,8 177,8
215,9 215,9
254,0 254,0
279,4 279,4
304,8 304,8 16 406,4 304,8 304,8
342,9 342,9 18 457,2 342,9 342,9
381,0 381,0 20 508,0 381,0 381,0
419,1 419,1 22 558,8 419,1 419,1
431,8 431,8 24 609,6 431,8 431,8
495,3 495,3 26 660,4 495,3 495,3
520,7 520,7
558,8 558,8 30 762,0 558,8 558,8
596,9 596,9
635,0 635,0 34 863,6 635,0 635,0
673,1 673,1 36 914,4 673,1 673,1
711,2 711,2 38 965,2 711,2 711,2
749,3 749,3 40 1016,0 749,3 749,3
762,0 711,2 42 1066,8 762,0 711,2
812,8 762,0 44 1117,6 812,8 762,0
850,9 800,1 46 1168,4 850,9 800,1
889,0 838,2 48 1219,2 889,0 838,2
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
EQUAL TEES
[email protected] www.aesteiron.com 13
ASME B16.9 MSS SP-75
NB O.D. at Bevel Run Outlet
T
T
OD
M
OD
C C
Run Outlet Run Outlet C (mm) M (mm)
NB O.D. at Bevel Run Outlet
Run Outlet Run Outlet C (mm) M (mm)
1
3
3/4
1/2
1
1/2 3/8 21,3 17,2 25,4 25,4
1/2 1/4 21,3 13,7 25,4 25,4
3/4 1/2 26,7 21,3 28,6 28,6
3/4 3/8 26,7 17,2 28,6 28,6
1 33,4 26,7 38,1 38,1
1 33,4 21,3 38,1 38,1
1 1/4 42,2 33,4 47,6 47,6
1 1/4 3/4 42,2 26,7 47,6 47,6
1 1/4 1/2 42,2 21,3 47,6 47,6
1 1/2 11/4 48,3 42,2 57,2 57,2
1 1/2 1 48,3 33,4 57,2 57,2
1 1/2 3/4 48,3 26,7 57,2 57,2
1 1/2 1/2 48,3 21,3 57,2 57,2
2 1 1/2 60,3 48,3 63,5 60,3
2 1 1/4 60,3 42,2 63,5 57,2
2 60,3 33,4 63,5 50,8
2 3/4 60,3 26,7 63,5 44,5
2 1/2 2 73,0 60,3 76,2 69,9
2 1/2 1 1/2 73,0 48,3 76,2 66,7
2 1/2 1 1/4 73,0 42,2 76,2 63,5
2 1/2 1 73,0 33,4 76,2 57,2
3 2 1/2 88,9 73,0 85,7 82,6
3 2 88,9 60,3 85,7 76,2
3 1 1/2 88,9 48,3 85,7 73,0
3 1 1/4 88,9 42,2 85,7 69,9
3 1/2 3 101,6 88,9 95,3 92,1
3 1/2 2 1/2 101,6 73,0 95,3 88,9
3 1/2 2 101,6 60,3 95,3 82,6
3 1/2 1 1/2 101,6 48,3 95,3 79,4
4 3 1/2 114,3 101,6 104,8 101,6
4 114,3 88,9 104,8 98,4
4 2 1/2 114,3 73,0 104,8 95,3
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
REDUCING OUTLET TEES
[email protected] www.aesteiron.com14
ASME B16.9 MSS SP-75
NB O.D. at Bevel Run Outlet
Run Outlet Run Outlet C (mm) M (mm)
NB O.D. at Bevel Run Outlet
Run Outlet Run Outlet C (mm) M (mm)
4 2 114,3 60,3 104,8 88,9
4 1 1/2 114,3 48,3 104,8 85,7
5 4 141,3 114,3 123,8 117,5
5 3 1/2 141,3 101,6 123,8 114,3
5 3 141,3 88,9 123,8 111,1
5 2 1/2 141,3 73,0 123,8 108,0
5 2 141,3 60,3 123,8 104,8
6 5 168,3 141,3 142,9 136,5
6 4 168,3 114,3 142,9 130,2
6 3 1/2 168,3 101,6 142,9 127,0
6 3 168,3 88,9 142,9 123,8
6 2 1/2 168,3 73,0 142,9 120,7
8 6 219,1 168,3 177,8 168,3
8 5 219,1 141,3 177,8 161,9
8 4 219,1 114,3 177,8 155,6
8 3 1/2 219,1 101,6 177,8 152,4
10 8 273,1 219,1 215,9 203,2
10 6 273,1 168,3 215,9 193,7
10 5 273,1 141,3 215,9 190,5
10 4 273,1 114,3 215,9 184,2
12 10 323,9 273,1 254,0 241,3
12 8 323,9 219,1 254,0 228,6
12 6 323,9 168,3 254,0 219,1
12 5 323,9 141,3 254,0 215,9
14 12 355,6 323,9 279,4 269,9
14 10 355,6 273,1 279,4 257,2
14 8 355,6 219,1 279,4 247,7
14 6 355,6 168,3 279,4 238, 1
16 14 406,4 355,6 304,8 304,8 16 14 406,4 355,6 304,8 304,8
16 12 406,4 323,9 304,8 295,3 16 12 406,4 323,9 304,8 295,3
16 10 406,4 273,1 304,8 282,6 16 10 406,4 273,1 304,8 282,6
16 8 406,4 219,1 304,8 273,1 16 8 406,4 219,1 304,8 273,1
16 6 406,4 168,3 304,8 263,5 16 6 406,4 168,3 304,8 263,5
18 16 457,2 406,4 342,9 330,2 18 16 457,2 406,4 342,9 330,2
18 14 457,2 355,6 342,9 330,2 18 14 457,2 355,6 342,9 330,2
18 12 457,2 323,9 342,9 320,7 18 12 457,2 323,9 342,9 320,7
18 10 457,2 273,1 342,9 308,0 18 10 457,2 273,1 342,9 308,0
18 8 457,2 219,1 342,9 298,5 18 8 457,2 219,1 342,9 298,5
20 18 508,0 475,2 381,0 368,3 20 18 508,0 475,2 381,0 368,3
20 16 508,0 406,4 381,0 355,6 20 16 508,0 406,4 381,0 355,6
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
REDUCING OUTLET TEES
[email protected] www.aesteiron.com 15
ASME B16.9 MSS SP-75
NB O.D. at Bevel Run Outlet
Run Outlet Run Outlet C (mm) M (mm)
NB O.D. at Bevel Run Outlet
Run Outlet Run Outlet C (mm) M (mm)
20 10 508,0 273,1 381,0 333,4 20 10 508,0 273,1 381,0 333,4
20 8 508,0 219,1 381,0 323,9 20 8 508,0 219,1 381,0 323,9
22 20 558,8 508,0 419,1 406,4 22 20 558,8 508,0 419,1 406,4
22 18 558,8 457,2 419,1 393,7 22 18 558,8 457,2 419,1 393,7
22 16 558,8 406,4 419,1 381,0 22 16 558,8 406,4 419,1 381,0
22 14 558,8 355,6 419,1 381,0 22 14 558,8 355,6 419,1 381,0
22 12 558,8 323,9 419,1 371,5 22 12 558,8 323,9 419,1 371,5
22 10 558,8 273, 1 419,1 358,8 22 10 558,8 273, 1 419,1 358,8
24 22 609,6 558,8 431,8 431,8 24 22 609,6 558,8 431,8 431,8
24 20 609,6 508,0 431,8 431,8 24 20 609,6 508,0 431,8 431,8
24 18 609,6 457,2 431,8 419,1 24 18 609,6 457,2 431,8 419,1
24 16 609,6 406,4 431,8 406,4 24 16 609,6 406,4 431,8 406,4
24 14 609,6 355,6 431,8 406,4 24 14 609,6 355,6 431,8 406,4
24 12 609,6 323,9 431,8 396,9 24 12 609,6 323,9 431,8 396,9
24 10 609,6 273,1 431,8 384,2 24 10 609,6 273,1 431,8 384,2
26 24 660,4 609,6 495,3 482,6 26 24 660,4 609,6 495,3 482,6
26 22 660,4 558,8 495,3 469,9 26 22 660,4 558,8 495,3 469,9
26 20 660,4 508,0 495,3 457,2 26 20 660,4 508,0 495,3 457,2
26 18 660,4 457,2 495,3 444,5 26 18 660,4 457,2 495,3 444,5
26 16 660,4 406,4 495,3 431,8 26 16 660,4 406,4 495,3 431,8
26 14 660,4 355,6 495,3 431,8 26 14 660,4 355,6 495,3 431,8
26 12 660,4 323,9 495,3 422,3 26 12 660,4 323,9 495,3 422,3
28 26 711,2 660,4 520,7 520,7
28 24 711,2 609,6 520,7 508,0
28 22 711,2 558,8 520,7 495,3
28 20 711,2 508,0 520,7 482,6
28 18 711,2 457,2 520,7 469,9
28 16 711,2 406,4 520,7 457,2
28 14 711,2 355,6 520,7 457,2
28 12 711,2 323,9 520,7 447,7
30 28 762,0 711,2 558,8 546,1
30 26 762,0 660,4 558,8 546,1 30 26 762,0 660,4 558,8 546,1
30 24 762,0 609,6 558,8 533,4 30 24 762,0 609,6 558,8 533,4
30 22 762,0 558,8 558,8 520,7 30 22 762,0 558,8 558,8 520,7
30 20 762,0 508,0 558,8 508,0 30 20 762,0 508,0 558,8 508,0
30 18 762,0 457,2 558,8 495,3 30 18 762,0 457,2 558,8 495,3
30 16 762,0 406,4 558,8 482,6 30 16 762,0 406,4 558,8 482,6
30 14 762,0 355,6 558,8 482,6 30 14 762,0 355,6 558,8 482,6
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
REDUCING OUTLET TEES
20 14 508,0 355,6 381,0 355,6 20 14 508,0 355,6 381,0 355,6
20 12 508,0 323,9 381,0 346,1 20 12 508,0 323,9 381,0 346,1
[email protected] www.aesteiron.com16
ASME B16.9 MSS SP-75
NB O.D. at Bevel Run Outlet
Run Outlet Run Outlet C (mm) M (mm)
NB O.D. at Bevel Run Outlet
Run Outlet Run Outlet C (mm) M (mm)
32 26 812,8 660,4 596,9 571,5
32 24 812,8 609,6 596,9 558,8
32 22 812,8 558,8 596,9 546,1
32 20 812,8 508,0 596,9 533,4
32 18 812,8 457,2 596,9 520,7
32 16 812,8 406,4 596,9 508,0
32 14 812,8 355,6 596,9 508,0
34 32 863,6 812,8 635,0 622,3
34 30 863,6 762,0 635,0 609,6 34 30 863,6 762,0 635,0 609,6
34 28 863,6 711,2 635,0 596,9
34 26 863,6 660,4 635,0 596,9 34 26 863,6 660,4 635,0 596,9
34 24 863,6 609,6 635,0 584,2 34 24 863,6 609,6 635,0 584,2
34 22 863,6 558,8 635,0 571,5 34 22 863,6 558,8 635,0 571,5
34 20 863,6 508,0 635,0 558,8 34 20 863,6 508,0 635,0 558,8
34 18 863,6 457,2 635,0 546,1 34 18 863,6 457,2 635,0 546,1
34 16 863,6 406,4 635,0 533,4 34 16 863,6 406,4 635,0 533,4
36 34 914,4 863,6 673,1 660,4 36 34 914,4 863,6 673,1 660,4
36 32 914,4 812,8 673,1 647,7
36 30 914,4 762,0 673,1 635,0 36 30 914,4 762,0 673,1 635,0
36 28 914,4 711,2 673,1 622,3
36 26 914,4 660,4 673,1 622,3 36 26 914,4 660,4 673,1 622,3
36 24 914,4 609,6 673,1 609,6 36 24 914,4 609,6 673,1 609,6
36 22 914,4 558,8 673,1 596,9 36 22 914,4 558,8 673,1 596,9
36 20 914,4 508,0 673,1 584,2 36 20 914,4 508,0 673,1 584,2
36 18 914,4 457,2 673,1 571,5 36 18 914,4 457,2 673,1 571,5
36 16 914,4 406,4 673,1 558,8 36 16 914,4 406,4 673,1 558,8
38 36 965,2 914,4 711,2 711,2 38 36 965,2 914,4 711,2 711,2
38 34 965,2 863,6 711,2 698,5 38 34 965,2 863,6 711,2 698,5
38 32 965,2 812,8 711,2 685,8 38 32 965,2 812,8 711,2 685,8
38 30 965,2 762,0 711,2 673,1 38 30 965,2 762,0 711,2 673,1
38 28 965,2 711,2 711,2 647,7
38 26 965,2 660,4 711,2 647,7 38 26 965,2 660,4 711,2 647,7
38 24 965,2 609,6 711,2 635,0 38 24 965,2 609,6 711,2 635,0
38 22 965,2 558,8 711,2 622,3 38 22 965,2 558,8 711,2 622,3
38 20 965,2 508,0 711,2 609,6 38 20 965,2 508,0 711,2 609,6
38 18 965,2 457,2 711,2 596,9 38 18 965,2 457,2 711,2 596,9
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
REDUCING OUTLET TEES
30 12 762,0 323,9 558,8 473,1 30 12 762,0 323,9 558,8 473,1
30 10 762,0 273,1 558,8 460,4 30 10 762,0 273,1 558,8 460,4
32 30 812,8 762,0 596,9 584,2
32 28 812,8 711,2 596,9 571,5
[email protected] www.aesteiron.com 17
ASME B16.9 MSS SP-75
NB O.D. at Bevel Run Outlet
Run Outlet Run Outlet C (mm) M (mm)
NB O.D. at Bevel Run Outlet
Run Outlet Run Outlet C (mm) M (mm)
40 26 1016,0 660,4 749,3 673,1 40 26 1016,0 660,4 749,3 673,1
40 24 1016,0 609,6 749,3 660,4 40 24 1016,0 609,6 749,3 660,4
40 22 1016,0 558,8 749,3 647,7 40 22 1016,0 558,8 749,3 647,7
40 20 1016,0 508,0 749,3 635,0 40 20 1016,0 508,0 749,3 635,0
40 18 1016,0 457,2 749,3 622,3 40 18 1016,0 457,2 749,3 622,3
42 36 1066,8 914,4 762,0 711,2 42 36 1066,8 914,4 762,0 711,2
42 34 1066,8 863,6 762,0 711,2 42 34 1066,8 863,6 762,0 711,2
42 32 1066,8 812,8 762,0 711,2 42 32 1066,8 812,8 762,0 711,2
42 30 1066,8 762,0 762,0 711,2 42 30 1066,8 762,0 762,0 711,2
42 28 1066,8 711,2 762,0 698,5 42 28 1066,8 711,2 762,0 698,5
42 26 1066,8 660,4 762,0 698,5 42 26 1066,8 660,4 762,0 698,5
42 24 1066,8 609,6 762,0 660,4 42 24 1066,8 609,6 762,0 660,4
42 22 1066,8 558,8 762,0 660,4 42 22 1066,8 558,8 762,0 660,4
42 20 1066,8 508,0 762,0 660,4 42 20 1066,8 508,0 762,0 660,4
42 18 1066,8 457,2 762,0 647,7 42 18 1066,8 457,2 762,0 647,7
42 16 1066,8 406,4 762,0 635,0 42 16 1066,8 406,4 762,0 635,0
44 42 1117,6 1066,8 812,8 762,0 44 42 1117,6 1066,8 812,8 762,0
44 40 1117,6 1016,0 812,8 749,3 44 40 1117,6 1016,0 812,8 749,3
44 38 1117,6 965,2 812,8 736,6 44 38 1117,6 965,2 812,8 736,6
44 36 1117,6 914,4 812,8 723,9 44 36 1117,6 914,4 812,8 723,9
44 34 1117,6 863,6 812,8 723,9 44 34 1117,6 863,6 812,8 723,9
44 32 1117,6 812,8 812,8 711,2 44 32 1117,6 812,8 812,8 711,2
44 30 1117,6 762,0 812,8 711,2 44 30 1117,6 762,0 812,8 711,2
44 28 1117,6 711,2 812,8 698,5
44 26 1117,6 660,4 812,8 698,5 44 26 1117,6 660,4 812,8 698,5
44 24 1117,6 609,6 812,8 698,5 44 24 1117,6 609,6 812,8 698,5
44 22 1117,6 558,8 812,8 685,8 44 22 1117,6 558,8 812,8 685,8
44 20 1117,6 508,0 812,8 685,8 44 20 1117,6 508,0 812,8 685,8
46 44 1168,4 1117,6 850,9 800,1 46 44 1168,4 1117,6 850,9 800,1
46 42 1168,4 1066,8 850,9 787,4 46 42 1168,4 1066,8 850,9 787,4
46 40 1168,4 1016,0 850,9 774,7 46 40 1168,4 1016,0 850,9 774,7
46 38 1168,4 965,2 850,9 762,0 46 38 1168,4 965,2 850,9 762,0
46 36 1168,4 914,4 850,9 762,0 46 36 1168,4 914,4 850,9 762,0
46 34 1168,4 863,6 850,9 749,3 46 34 1168,4 863,6 850,9 749,3
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
REDUCING OUTLET TEES
40 38 1016,0 965,2 749,3 749,3 40 38 1016,0 965,2 749,3 749,3
40 36 1016,0 914,4 749,3 736,6 40 36 1016,0 914,4 749,3 736,6
40 34 1016,0 863,6 749,3 723,9 40 34 1016,0 863,6 749,3 723,9
40 32 1016,0 812,8 749,3 711,2 40 32 1016,0 812,8 749,3 711,2
40 30 1016,0 762,0 749,3 698,5 40 30 1016,0 762,0 749,3 698,5
40 28 1016,0 711,2 749,3 673,1
[email protected] www.aesteiron.com18
ASME B16.9 MSS SP-75
NB O.D. at Bevel Run Outlet
Run Outlet Run Outlet C (mm) M (mm)
NB O.D. at Bevel Run Outlet
Run Outlet Run Outlet C (mm) M (mm)
48 42 1219,2 1066,8 889,0 812,8 48 42 1219,2 1066,8 889,0 812,8
48 40 1219,2 1016,0 889,0 812,8 48 40 1219,2 1016,0 889,0 812,8
48 38 1219,2 965,2 889,0 812,8 48 38 1219,2 965,2 889,0 812,8
48 36 1219,2 914,4 889,0 787,4 48 36 1219,2 914,4 889,0 787,4
48 34 1219,2 863,6 889,0 787,4 48 34 1219,2 863,6 889,0 787,4
48 32 1219,2 812,8 889,0 787,4 48 32 1219,2 812,8 889,0 787,4
48 30 1219,2 762,0 889,0 762,0 48 30 1219,2 762,0 889,0 762,0
48 28 1219,2 711,2 889,0 762,0
48 26 1219,2 660,4 889,0 762,0 48 26 1219,2 660,4 889,0 762,0
48 24 1219,2 609,6 889,0 736,6 48 24 1219,2 609,6 889,0 736,6
48 22 1219,2 558,8 889,0 736,6 48 22 1219,2 558,8 889,0 736,6
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
REDUCING OUTLET TEES
46 32 1168,4 812,8 850,9 749,3 46 32 1168,4 812,8 850,9 749,3
46 30 1168,4 762,0 850,9 736,6 46 30 1168,4 762,0 850,9 736,6
46 28 1168,4 711,2 850,9 736,6
46 26 1168,4 660,4 850,9 736,6 46 26 1168,4 660,4 850,9 736,6
46 24 1168,4 609,6 850,9 723,9 46 24 1168,4 609,6 850,9 723,9
46 22 1168,4 558,8 850,9 723,9 46 22 1168,4 558,8 850,9 723,9
48 46 1219,2 1168,4 889,0 838,2 48 46 1219,2 1168,4 889,0 838,2
48 44 1219,2 1117,6 889,0 838,2 48 44 1219,2 1117,6 889,0 838,2
[email protected] www.aesteiron.com
Standards : ASTM A403 – ASME SA403 - ANSI – B 16.9
– 'Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings'
API 590-605
ASME B16.9 : 'Factory-Made Wrought Buttwelding Fittings”
ASME B16.25 : 'Buttwelding Ends'
ASME B16.28 : 'Wrought Steel Buttwelding Short Radius Elbows and Returns'
MSS SP-43 : Butt-Welding Fittings that are fabricated and wrought for low pressure and corrosion resistant applications'
Schedule : Sch 5 TO Sch XXS.
Sizes : 1/2” TO 36”
(SEAMLESS UPTO 24”)
(WELDED 8” TO 36” )
Materials : Monel, Nickel, Inconel, Hastalloy, Titanium, stainless Steel, Alloy Steel, Carbon Steel, Stainless Steel ASME / ASTM SA / A403 SA / A 774 WP-S, WP-W, WP-WX, 304, 304L, 316, 316L, 304/304L, 316/316L, DIN 1.4301, DIN 1.4401, DIN 1.4404, DIN1.4306
19
ASME B16.9 MSS SP-75
NB O.D. at Bevel
LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm)
ODOD
T
T
OD
H
OD
T
T
H
CONCENTRIC ECCCENTRIC
REDUCING OUTLET TEES
NB O.D. at Bevel
LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm)
3/4 3/8 26,7 17,2 38,1
3/4 1/2 26,7 21,3 38,1
1 3/4 33,4 26,7 50,8
1 1/2 33,4 21,3 50,8
1 1/4 1 42,2 33,4 50,8
1 1/4 3/4 42,2 26,7 50,8
1 1/4 1/2 42,2 21,3 50,8
1 1/2 1 1/4 48,3 42,2 63,5
1 1/2 1 48,3 33,4 63,5
1 1/2 3/4 48,3 26,7 63,5
11/2 1/2 48,3 21,3 63,5
2 1 1/2 60,3 48,3 76,2
2 1 1/4 60,3 42,2 76,2
2 1 60,3 33,4 76,2
2 3/4 60,3 26,7 76,2
2 1/2 2 73,0 60,3 88,9
2 1/2 1 1/2 73,0 48,3 88,9
2 1/2 1 1/4 73,0 42,2 88,9
2 1/2 1 73,0 33,4 88,9
3 2 1/2 88,9 73,0 88,9
3 2 88,9 60,3 88,9
3 1 1/2 88,9 48,3 88,9
3 1 1/4 88,9 42,2 88,9
3 1/2 3 101,6 88,9 101,6
3 1/2 2 1/2 101,6 73,0 101,6
3 1/2 2 101,6 60,3 101,6
3 1/2 1 1/2 101,6 48,3 101,6
3 1/2 1 1/4 101,6 42,2 101,6
NOTE: LE = Large End, SE= Small End
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
REDUCERS
[email protected] www.aesteiron.com20
ASME B16.9 MSS SP-75
NB O.D. at Bevel
LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm)
NB O.D. at Bevel
LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm)
4 3 1/2
4 3
4 2 1/2
4 2
4 1 1/2
5 4
5 3 1/2
5 3
5 2 1/2
5 2
6 5
6 4
6 3 1/2
6 3
6 2 1/2
8 6
8 5
8 4
8 3 1/2
10 8
10 6
10 5
10 4
12 10
12 8
12 6
12 5
14 12
14 10
14 8
14 6
16 14
16 12
16 10
16 8
18 16
18 14
18 12
18 10
114,3 101,6 101,6
114,3 88,9 101,6
114,3 73,0 101,6
114,3 60,3 101,6
114,3 48,3 101,6
141,3 114,3 127,1
141,3 101,6 127,0
141,3 88,9 127,0
141,3 73,0 127,0
141,3 60,3 127,0
168,3 141,3 139,7
168,3 114,3 139,7
168,3 101,6 139,7
168,3 88,9 139,7
168,3 73,0 139,7
219,1 168,3 152,4
219,1 141,3 152,4
219,1 114,3 152,4
219,1 101,6 152,4
273,1 219, 1 177,8
273,1 168,3 177,8
273,1 141,3 177,8
273,1 114,3 177,8
323,9 273,1 203,2
323,9 219, 1 203,2
323,9 168,3 203,2
323,9 141,3 203,2
355,6 323,9 330,2
355,6 273,1 330,2
355,6 219,1 330,2
355,6 168,3 330,2
406,4 355,6 355,6 16 14 406,4 355,6 355,6
406,4 323,9 355,6 16 12 406,4 323,9 355,6
406,4 273,1 355,6 16 10 406,4 273,1 355,6
406,4 219,1 355,6 16 8 406,4 219, 1 355,6
457,2 406,4 381,0 18 16 457,2 406,4 381,0
457,2 355,6 381,0 18 14 457,2 355,6 381,0
457,2 323,9 381,0 18 12 457,2 323,9 381,0
457,2 273,1 381,0 18 10 457,2 273,1 381,0
NOTE: LE = Large End, SE= Small End
REDUCING OUTLET TEES
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
REDUCERS
[email protected] www.aesteiron.com 21
ASME B16.9 MSS SP-75
NB O.D. at Bevel
LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm)
NB O.D. at Bevel
LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm)
NOTE: LE = Large End, SE= Small End
REDUCING OUTLET TEES
20 18 508,0 457,2 508,0 20 18 508,0 457,2 508,0
20 16 508,0 406,4 508,0 20 16 508,0 406,4 508,0
20 14 508,0 355,6 508,0 20 14 508,0 355,6 508,0
20 12 508,0 323,9 508,0 20 12 508,0 323,9 508,0
22 20 558,8 508,0 508,0 22 20 558,8 508,0 508,0
22 18 558,8 457,2 508,0 22 18 558,8 457,2 508,0
22 16 558,8 406,4 508,0 22 16 558,8 406,4 508,0
22 14 558,8 355,6 508,0 22 14 558,8 355,6 508,0
24 22 609,6 558,8 508,0 24 22 609,6 558,8 508,0
24 20 609,6 508,0 508,0 24 20 609,6 508,0 508,0
24 18 609,6 457,2 508,0 24 18 609,6 457,2 508,0
24 16 609,6 406,4 508,0 24 16 609,6 406,4 508,0
26 24 660,4 609,6 609,6 26 24 660,4 609,6 609,6
26 22 660,4 558,8 609,6 26 22 660,4 558,8 609,6
26 20 660,4 508,0 609,6 26 20 660,4 508,0 609,6
26 18 660,4 457,2 609,6 26 18 660,4 457,2 609,6
28 26 711,2 660,4 609,6
28 24 711,2 609,6 609,6
28 20 711,2 508,0 609,6
28 18 711,2 457,2 609,6
30 28 762,0 711,2 609,6
30 26 762,0 660,4 609,6 30 26 762,0 660,4 609,6
30 24 762,0 609,6 609,6 30 24 762,0 609,6 609,6
30 20 762,0 508,0 609,6 30 20 762,0 508,0 609,6
32 30 812,8 762,0 609,6
32 28 812,8 711,2 609,6
32 26 812,8 660,4 609,6
32 24 812,8 609,6 609,6
34 32 863,6 812,8 609,6
34 30 863,6 762,0 609,6 34 30 863,6 762,0 609,6
34 26 863,6 660,4 609,6 34 26 863,6 660,4 609,6
34 24 863,6 609,6 609,6 34 24 863,6 609,6 609,6
36 34 914,4 863,6 609,6 36 34 914,4 863,6 609,6
36 32 914,4 812,8 609,6
36 30 914,4 762,0 609,6 36 30 914,4 762,0 609,6
36 26 914,4 660,4 609,6 36 26 914,4 660,4 609,6
36 24 914,4 609,6 609,6 36 24 914,4 609,6 609,6
38 36 965,2 914,4 609,6 38 36 965,2 914,4 609,6
38 34 965,2 863,6 609,6 38 34 965,2 863,6 609,6
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
REDUCERS
[email protected] www.aesteiron.com22
ASME B16.9 MSS SP-75
NB O.D. at Bevel
LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm)
NB O.D. at Bevel
LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm)
NOTE: LE = Large End, SE= Small End
REDUCING OUTLET TEES
38 32 965,2 812,8 609,6 38 32
38 30 965,2 762,0 609,6 38 30
38 28 965,2 711,2 609,6
38 26 965,2 660,4 609,6 38 26
38 24 965,2 609,6 609,6
38 22 965,2 558,8 609,6
38 20 965,2 508,0 609,6
40 38 1016,0 965,2 609,6 40
40 36 1016,0 914,4 609,6 40
40 34 1016,0 863,6 609,6 40
40 32 1016,0 812,8 609,6 40
40 30 1016,0 762,0 609,6 40
40 26 1016,0 660,4 609,6
40 24 1016,0 609,6 609,6
40 22 1016,0 558,8 609,6
40 20 1016,0 508,0 609,6
42 40 1066,8 1016,0 609,6
42 38 1066,8 965,2 609,6
42 36 1066,8 914,4 609,6 42
42 34 1066,8 863,6 609,6 42
42 32 1066,8 812,8 609,6 42
42 30 1066,8 762,0 609,6 42
42 26 1066,8 660,4 609,6
42 24 1066,8 609,6 609,6
44 42 1117,6 1066,8 609,6 44
44 40 1117,6 1016,0 609,6 44
44 38 1117,6 965,2 609,6 44
44 36 1117,6 914,4 609,6 44
44 34 1117,6 863,6 609,6
44 32 1117,6 812,8 609,6
44 30 1117,6 762,0 609,6
44 26 1117,6 660,4 609,6
44 24 1117,6 609,6 609,6
44 22 1117,6 558,8 609,6
46 44 1168,4 1117,6 711,2 46
46 42 1168,4 1066,8 711,2 46
46 40 1168,4 1016,0 711,2 46
46 38 1168,4 965,2 711,2 46
46 36 1168,4 914,4 711,2
965,2 812,8 609,6
965,2 762,0 609,6
965,2 660,4 609,6
38 1016,0 965,2 609,6
36 1016,0 914,4 609,6
34 1016,0 863,6 609,6
32 1016,0 812,8 609,6
30 1016,0 762,0 609,6
36 1066,8 914,4 609,6
34 1066,8 863,6 609,6
32 1066,8 812,8 609,6
30 1066,8 762,0 609,6
42 1117,6 1066,8 609,6
40 1117,6 1016,0 609,6
38 1117,6 965,2 609,6
36 1117,6 914,4 609,6
44 1168,4 1117,6 711,2
42 1168,4 1066,8 711,2
40 1168,4 1016,0 711,2
38 1168,4 965,2 711,2
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
REDUCERS
[email protected] www.aesteiron.com 23
ASME B16.9 MSS SP-75
NB O.D. at Bevel
LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm)
NB O.D. at Bevel
LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm)
NOTE: LE = Large End, SE= Small End
REDUCING OUTLET TEES
46 34 1168,4 863,6 711,2
46 32 1168,4 812,8 711,2
46 30 1168,4 762,0 711,2
46 26 1168,4 660,4 711,2
46 24 1168,4 609,6 711,2
48 46 1219,2 1168,4 711,2 48 46 1219,2 1168,4 711,2
48 44 1219,2 1117,6 711,2 48 44 1219,2 1117,6 711,2
48 42 1219,2 1066,8 711,2 48 42 1219,2 1066,8 711,2
48 40 1219,2 1016,0 711,2 48 40 1219,2 1016,0 711,2
48 38 1219,2 965,2 711,2
48 36 1219,2 914,4 711,2
48 34 1219,2 863,6 711,2
48 32 1219,2 812,8 711,2
48 30 1219,2 762,0 711,2
48 26 1219,2 660,4 711,2
48 24 1219,2 609,6 711,2
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
REDUCERS
[email protected] www.aesteiron.com
IMPORTANT SPECIFICATIONS FOR REDUCER PIPE FITTINGS :
Ÿ Dimension : B16.28, MSS-SP-43.,ANSI/ASME B16.9
Ÿ Thickness : Schedule 5S, XS, 80S, S80, S100, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, S120, S140, S160, XXS and others.
Ÿ Size : Seamless (1/2"~24"), Welded / Fabricated Elbow (1/2" ~ 48") ERW
Ÿ Type : Fabricated / Seamless / Welded
Ÿ Form : Pipe Reducer, Concentric Reducer, Eccentric Reducer
IMPORTANT MATERIAL AND GRADES PIPE FITTING REDUCER :
Ÿ Stainless Steel Reducer : ASTM A403 WP 304/ 317L/ 321/ 310/ 347/ 904L 304L/ 304H/ 316/ 316L/ 317
Ÿ Alloy Steel Reducer : ASTM A234 WP1/ WP11/ WP22/ WP91 / WP5/ Wp9
Ÿ Carbon Steel Reducer : ASTM A234 WPB /MSS-SP-75 WPHY 42/46/52/56/60/65/70 A420 WPL3/ A420 WPL6
Ÿ Duplex & Super Duplex Steel Reducer : ASTM A815, S32205. Werkstoff No. 1.4462, ASME SA815 UNS NO S31803
Ÿ Nickel Alloy Reducer : UNS 6600 (Inconel 600), UNS 6601 (Inconel 601), ASTM / ASME SB 336 UNS 2201 (Nickel 201), UNS 2200 (Nickel 200), UNS 4400 (Monel 400), UNS 6625 (Inconel 625), UNS 10276 (Hastelloy C 276), UNS 8020 (Alloy 20 / 20 CB 3, UNS 8825 Inconel (825)
Ÿ Copper Nickel Reducer : CuNi30Mn1Fe , CuNi10Fe1Mn
OTHER IMPORTANT CATEGORIES OF BUTT WELD FITTINGS PIPE REDUCER :
Alloy Steel Reducer, Stainless Steel Reducer, Carbon Steel Concentric Reducer, ANSI 16.9 Fitting reducer, Monel Reducer, Stainless steel fitting reducer, Alloy 20 Butt weld reducer and others.
24
ASME B16.9
NB(Inch)
O.D. atBevel(mm)
# E (mm)
LimitingW.T. for
Length E(mm)
E (3)1
(mm)
T
E(E )1
ID
OD
END CAPS
MSS SP-75
NB(Inch)
O.D. atBevel(mm)
# E (mm)
LimitingW.T. for
Length E(mm)
E1
(mm)
1/2 21,3 25,4 3,7 25,4
3/4 26,7 25,4 3,9 25,4
1 33,4 38,1 4,6 38,1
1 1/4 42,2 38,1 4,9 38,1
1 1/2 48,3 38,1 5,1 38,1
2 60,3 38,1 5,5 44,5
2 1/2 73,0 38,1 7,0 50,8
3 88,9 50,8 7,6 63,5
3 1/2 101,6 63,5 8,1 76,2
4 114,3 63,5 8,6 76,2
5 141,3 76,2 9,5 88,9
6 168,3 88,9 11,0 101,6
8 219,1 101,6 12,7 127,0
10 273,1 127,0 12,7 152,4
12 323,9 152,4 12,7 177,8
14 355,6 165,1 12,7 190,5
16 406,4 177,8 12,7 203,2 16 406,4 177,8 25,4 203,2
18 457,2 203,2 12,7 228,6 18 457,2 203,2 25,4 228,6
20 508,0 228,6 12,7 254,0 20 508,0 228,6 25,4 254,0
22 558,8 254,0 12,7 254,0 22 558,8 254,0 25,4 254,0
24 609,6 266,7 12,7 304,8 24 609,6 266,7 25,4 304,8
26 660,4 266,7 26 660,4 266,7 25,4 304,8
28 711,2 266,7
30 762,0 266,7 30 762,0 266,7 25,4 304,8
32 812,8 266,7
34 863,6 266,7 34 863,6 266,7 25,4 304,8
36 914,4 266,7 36 914,4 266,7 25,4 304,8
38 965,2 304,8 38 965,2 304,8 25,4 342,9
40 1016,0 304,8 40 1016,0 304,8 25,4 342,9
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
END CAPS
[email protected] www.aesteiron.com 25
ASME B16.9
NB(Inch)
O.D. atBevel(mm)
# E (mm)
LimitingW.T. for
Length E(mm)
E (3)1
(mm)
END CAPS
MSS SP-75
NB(Inch)
O.D. atBevel(mm)
# E (mm)
LimitingW.T. for
Length E(mm)
E1
(mm)
42 1066,8 304,8 42 1066,8 304,8 25,4 342,9
44 1117,6 342,9 44 1117,6 342,9 25,4 281,0
46 1168,4 342,9 46 1168,4 342,9 25,4 281,0
48 1219,2 342,9 48 1219,2 342,9 25,4 281,0
NOTE: # Length E applies pertaining to the thickness not exceeding that given in column “Limiting Wall Thickness for Length E”
1 Length E1 applies for thicknessgreater than that given in column “Limiting Wall Thickness For sizes 26in. and greater, length E1, shall be by agreement between manufacturer and purchaser.
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
END CAPS
[email protected] www.aesteiron.com
Ÿ Standards : ANSI B16.9, ASME B16.25, MSS SP-43, ASME B16.25, ASTM A403 / ASME SA403
Ÿ DIN : DIN28011, DIN2616, DIN2615, DIN2617, DIN2605
Ÿ EN : EN10253-2, EN10253-1
Ÿ Stainless Steel End Caps : DIN 1.4404, 304H, 309, 310, 316, 316L, ASTM A403 WP316/316L, ASTM A403 WP 304/304L, ASTM A182 F316L, 904L, 304L, DIN 1.4301 and others
Ÿ Alloy steel End Caps : WP22 / WP91 / WP11 / WP9 / ASTM A234, ASME SA234 WPB
Ÿ Duplex Steel End Caps : ASME SA815 UNS No S31803, S32205, ASTM A815Carbon Steel End Cap : WPHY 42, ASTM A234, ASME SA234 WPB, WPBW, WPHY 46, WPHY 52, WPH 60 and others.
Key words : Equal tee, Manufacturers and suppliers of Equal Tees in various types of material grades, Tees, Equal Tee Fitting, ASTM A403 Stainless Steel Equal Tee, High quality equal tee dealers, Duplex steel equal tee, Super Duplex Steel Equal Tee, High quality equal tee exporter, Pipe equal tee, Butt weld equal tee, A234 WP Carbon Steel Equal Tee, Equal tee dealers.
Equal Tees:
End Caps
26
F
G
R
R
T
Note (1)
Note (2)
Note squarecorner
ASME B16.9 long type
NB(inch)
O.D. atBevel(mm)
F(mm)
Rad. ofFillet R(mm)
DIA. OfLap G(mm)
LAP-JOINT STUB ENDS
O.D. of Barrel(mm)
Max. Min.
ASME B16.9 - Short type/ MSS-SP 43 Type A
NB(inch)
O.D. atBevel(mm)
F(mm)
Rad. ofFillet R(mm)
DIA. OfLap G(mm)
O.D. of Barrel(mm)
Max. Min.
1/2 21,3 76,2 3,2 34,9 22,8 20,6 1/2 21,3 50,8 3,2 34,9
3/4 26,7 76,2 3,2 42,9 28,1 25,9 3/4 26,7 50,8 3,2 42,9
1 101,6 3,2 50,8 35,0 32,6 1 33,4 50,8 3,2 50,8
1 1/4 41,2 101,6 4,8 63,5 43,6 41,4 1 1/4 41,2 50,8 4,8 63,5
1 1/2 48,3 101,6 6,4 73,0 49,9 47,5 1 1/2 48,3 50,8 6,4 73,0
2 60,3 152,4 7,9 92,1 62,4 59,5 2 60,3 63,5 7,9 92,1
2 1/2 73,0 152,4 7,9 104,8 75,3 72,2 2 1/2 73,0 63,5 7,9 104,8
3 88,9 152,4 9,5 127,0 91,3 88,1 3 88,9 63,5 9,5 127,0
3 1/2 101,6 152,4 9,5 139,7 104,0 100,8 3 1/2 101,6 76,2 9,5 139,7
4 114,3 152,4 11,1 157,2 116,7 113,5 4 114,3 76,2 11,1 157,2
5 141,3 203,2 11,1 185,7 144,4 140,5 5 141,3 76,2 11,1 185,7
6 168,3 203,2 12,7 215,9 171,3 167,5 6 168,3 88,9 12,7 215,9
8 219,1 203,2 12,7 269,9 222,1 218,3 8 219,1 101,6 12,7 269,9
10 273,1 254,0 12,7 323,9 277,2 272,3 10 273,1 127,0 12,7 323,9
12 323,9 254,0 12,7 381,0 328,0 323,1 12 323,9 152,4 12,7 381,0
14 355,6 304,8 12,7 412,8 359,9 354,8 14 355,6 152,4 12,7 412,8
16 406,4 304,8 12,7 469,9 411,0 405,6 16 406,4 152,4 12,7 469,9
18 457,2 304,8 12,7 533,4 462,0 456,4 18 457,2 152,4 12,7 533,4
20 508,0 304,8 12,7 584,2 514,1 507,2 20 508,0 152,4 12,7 584,2
22 558,8 304,8 12,7 641,4 564,9 558,0
24 609,6 304,8 12,7 692,2 615,7 608,8 24 609,6 152,4 12,7 692,2
33,4
NOTE : When used along with high pressure flange, there may arise a necessity for increasing the length of stub ends in sizes 12 in and larger.
R - These mentioned dimensions conform to the radius established for lap-joint flanges in American National Standard Steel Pipe Flanges & Flanged Fittings ASME B16.5.
G - The dimension conform to standard machined facings shown in the American National Standard Steel Pipe Flanges and Flanged Fittings ASME B16.5. The back of the face of the lap shall be machined to conform to the surface on which it seats. The ring joint facings [RJF] are to be applied use dimension 'K' as given in ASME B16.5.
F - When special facings such as tongue-groove, male & female, etc. are employed, additional lap thickness must be provided as required and such additional thickness shall be in addition to the basic length 'F”.
BUTT-WELD FITTINGSASME B16.9/ MSS SP-43
STUB ENDS
[email protected] www.aesteiron.com 27
SPECIFICATIONS FOR STUB END:
Ÿ STANDARD [ANSI/ASME] : ASME B16.28, ASME B16.25, MSS SP-43, ASTM A403 / ASME SA403
Ÿ DIN : DIN28011, DIN2616, DIN2615, DIN2605, DIN2617
Ÿ EN : EN10253-2, EN10253-1
Ÿ TYPE : WELDED, ERW, SEAMLESS, FABRICATED
MATERIAL AND GRADES FOR STUB END :
Ÿ STAINLESS STEEL STUB END : ASTM A403 AP304/304L, 309, 316, 310, 316L, 317L, 321, 347, 904L, DIN1.4306, DIN 1.4404, DIN 1.4301, ASTM A403 WP316/316L
Ÿ CARBON STEEL STBU END : WPH 60, WPHY 46, WPHY 42, WPBW, ASME SA234 WPB, WPHY 65, WPHY 70, ASTM A234
Ÿ ALLOY STEEL STUB END : ASME SA234 WP1 , WP9, WP22, WP91, WP11, ASTM A234
Ÿ DUPLEX STEEL STUB END : S32205, ASTM A815, ASME SA815 UNS NO S31803
[email protected] www.aesteiron.com
BUTT-WELD FITTINGSASME B16.9/ MSS SP-43
28
BC
A
EC
A
BC
G
C B
C
C
B
C
C
B
G
CF
C
Full Flow Cross
Long Sweep Full Flow Tee
Long Sweep 90° Elbow
Standpipe Gosseneck 160° With Top Outlet
Long Sweep Tee With Top Integral Bullplug
Standpipe Gooseneck With Top Integral Bullplug
Long Sweep Tee
Long Sweep 45° Elbow
MEETING THE STANDARD [INTERNATIONAL]Manifold Fittings specified in accordance with the following relevant standards
MSS-SP-75:
DESIGNED IN TWO STANDARD PRODUCT LEVELS
Manufacturers provide levels of standard products to meet requirements for 5.000 psi and 10.000 psi services.
Specification - High Test Wrought Butt Weld Fittings.
ASME B31.3: Chemical Plant & Petroleum Refinery Piping purposes
ASME B16.9: Factory Made Wrought -steel butt Weld Fittings.
NACE MR-01-75: Sulfide St ess Crack Resistant Metallic Material for the purpose of Oil field equipments.
ASME VIII: Division 1 Section 13.10 Boiler and Pressure Vessel Code [BPVC].
API 6A: Specification for Wellhead and :
Christmas Tree Equipment.
LAP-JOINT STUB ENDS
10.000 psi
Max Cold Working Pressure
Max Test Pressure
Max Operation Temp.
Min. Operation Temp.
Nominal Sizes
Min. Yield Stress
MaterialCarbon
ManganeseSteel
Low AlloySteel
5.000 psi
5.000 psi
10.000 psi
-50 deg C
2” to 6”
52K psi
10.000 psi
15.000 psi
400 deg F
-50 deg C
2” to 6”
75K psi
400 deg F
BUTT-WELD FITTINGSMANIFOLD FITTINGS
MANIFOLD FITTINGS
[email protected] www.aesteiron.com
DESIGNED FOR HIGH PERFORMANCE UNDER HAZARDOUS CONDITIONSManifold Fittings are designed to address a number of factors which are vital in achieving high performance in hazardous oilfield service.
Erosion and corrosion All fittings ha e wall thickness designed with ample erosion and corrosion allowance.
Weldness abilityMaterials have been selected with particular emphasis of their weldability and compatibility with common piping materials.
Flow characteristics The internal bores of forged-fittings are machined on sophisticated computer-controlled machining centers to ensure smooth, uninterrupted transitions from bore to bore. Flow characteristics are upscaled to their maximum capacity.
Dependability As being forged from billet in closed dies negates most, if not all, the problems with associated with hidden flaws inherent in casting & plate. Throughout the working life of Manifold-Fittings, you can be sure a consistently sound wall section is ever-present.
Manifold Fittings Nominal Dimensions in mm
Size(NB)
A B C D E F G
2” 406,4 203,2 152,4 330,2 203,2 386,1
3” 406,4 203,2 152,4 330,2 304,8 203,2 386,1
4” 558,8 279,4 208,3 406,4 355,6 279,4 495,3
5” 609,6 304,8 241,3 482,6 406,4 292,1 586,5
6” 762 381 304,8 685,8 609,6 330,2 805,2
BUTT-WELD FITTINGSMANIFOLD FITTINGS
30 [email protected] www.aesteiron.com
Manifold Fittings
Ÿ It positively seals.Ÿ Manifold fittings are quick & easy for assembly purposes.Ÿ Easy On/Off Hose Connections.Ÿ Possesses a 360° orientation.Ÿ The fittings pressure 1''& 2'' to 150 P.S.I. at 70°F.Ÿ The fittings pressure 3'' to 125 P.S.I. at 70°F.
Manifold fittings - [High pressure]Long sweep manifold fittings casting/forged are manufactured and designed according to the following specifications:API 6A, ANSI B31.3, ASME B16.9, ASME VIII, MSS-SP-75 and NACE MR-01-75
Manifold fittings being available in Full flow / Reduced configuration with respect to pipe wall schedules for the below stated pressure ratings :
Max Working Pressure 5000 PSI 7500 PSI 10,000 PSI 15,000 PSI
Test pressure 7,500 PSI 11,250 PSI 15,000 PSI 15,000 PSI
Operating Temp. Range -60° TO +345°C -60° TO +345°C -60° TO +345°C -60° TO +345°C
Min, Yield 52,000 PSI >80,000 PSI >80,000 PSI >80,000 PSI
Min. Yield 66,000 PSI 105,000 PSI 105,000 PSI 105,000 PSI
Material ASTM A487 Gr4 ASTM A487 Gr4 ASTM A234 Gr 4130 ASTM A234 Gr 4130
[*psi - Pound-force per square inch]
MANIFOLD FITTINGS
All Fittings
NominalPipe Size
(Inch)
Outside*Diameterat Bevel(1), (2)
InsideDiameter
at End (1),
(3), (4)
WallThickness
(3)
Centre-to End
Dimen-sion
A, B, C, M
TOLERANCE FOR ASME B16.9/B16.28
OverallLength
F, H
OverallLength E
Centre-to-Centre
Dimen-sion
O
Back-to-Face
Dimen-sion
K
Align-ment ofEnds U
OutsideDiameterof Lap G
FilletRadius of
Lap R
90-Degand
45-DegElbows
and Tees
Reducersand Lap-
JointStubEnds
Caps 180-Deg Returns Lap-Joint Ends
1 /2-21/2
3 - 31/2
4
5 - 8
10 - 18
20 - 24
26 - 30
32 - 48
+1.6
-0.8
±1.6
±1.6
+2.41.6
+4.0-3.2
+6.4-4.8
+6.4-4.8
+6.4-4.8
±0.8
±1.6
±1.6
±1.6
±3.2
±4.8
±4.8
±4.8
Not lessthan
87.5 %of
Nominalthick-
ness
±1.6
±1.6
±1.6
±1.6
±2.4
±2.4
±3.2
±4.8
±1.6
±1.6
±1.6
±1.6
±2.4
±2.4
±4.8
±4.8
±3.2
±3.2
±3.2
±6.4
±6.4
±6.4
±9.5
±9.5
±6.4
±6.4
±6.4
±6.4
±9.5
±9.5
-
-
±6.4
±6.4
±6.4
±6.4
±6.4
±6.4
-
-
±0.8
±0.8
±0.8
±0.8
±1.6
±1.6
-
-
0
-0.8
0
-0.8
0-0.8
0-0.8
0-1.6
0-1.6
-
-
0
-0.8
0
-0.8
0-1.6
0-1.6
0-1.6
0-1.6
-
-
1. Dimensions in mm2. Out-of-round equals sum of absolute values of plus and minus tolerance.3. The inside diameter and the nominal wall thicknesses at ends are to be specified by the purchaser.4. Unless otherwise specified and mentioned by the purchaser, these tolerances apply to the nominal inside diameter, which equals difference between the nominal outside and twice the nominal wall thickness.
NOTE:
Nomina Pipe SizeAngularity Tol.
Off Angle Q
1/2 - 4
5 - 8
10 - 12
14 - 16
18 - 24
26 - 30
32 - 42
44 - 48
Off Plane P
0.8 1.6
1.6 3.2
2.4 4.8
2.4 6.4
3.2 9.5
4.8 9.5
4.8 12.7
4.8 19.1
BUTT-WELD FITTINGSASME B16.9/ B16.28
TOLERANCES
[email protected] www.aesteiron.com
A
AA A
O
K U U
C C
M
E(E1)HH
B
B
Q
QP
NominalPipe Size
(Inch)
Inside (1)Diameter
at End
wall (3)Thick-ness
Elbow(5) Other
TOLERANCE FOR MSS SP - 75
Through-out
Body ofElbows
(4)
Teesand 1.5Relbows
3Relbows Reducers Caps
AngularityOff Angle
Q
ElbowsOff
Plane
ReducersOff Plane
(6)
All Fittings
Out-of-roundness(2)
Center-to-end DimensionsA,B,C,M
OverallLength H
OverallLength
E
At ends of fittings
16 to 24 ± 2.3 - 0.3 4.8 3.1 2.5% ± 2.3 ± 3.1 ± 2.3 ± 6.4 1.6 6.4 2.5%
26 to 36 ± 2.3 - 0.3 Note 5 3.1 2.5% ± 3.1 ± 6.4 ± 4.8 ± 9.7 2.3 12.7 2.5%
38 to 48 ± 3.1 - 0.3 Note 5 3.1 2.5% ± 4.8 ± 9.7 ± 9.7 ± 9.7 3.1 19.1 2.5%
1. Dimensions in mm2. The inside diameter at the end shall be determined by circumferential measurements, and the tolerace refers to variations from nominal l.D. calculations by (OD nom - (2t) nom).3. Out-of-roundness tolerances can be the difference between the maximum & minimum diameters measured on any radial cross-section.4. When elbows are intended for field segm.enting, out-of- oundness tolerance may be furnished to 1 % by agreement between the manufacturer and the purchaser. It is acknowledged that extra thickness, if any, may be on the l.D.5. When elbows are intended for field segm.enting, out-of- oundness tolerance may be furnished to 1 % by agreement between the manufacturer and the purchaser. It is recognized that extra thickness, if any, may be on the l.D.6. Out-of-roundness toleraces at ends shall be 1 % of diameter for NPS 26 and larger.7. Percent of O.D.8. Outside diameter may be tapered at angle to 30° beyond weld bevel.
NOTE:
BUTT-WELD FITTINGSMSS SP-7755
TOLERANCES
32 [email protected] www.aesteiron.com
*t=20 max.
1,6 ± 0,8
[Root face]
(a)PLAIN BEVEL
- 0°*30° + 5°
37,5° ± 2,5°
10° ± 1°
Rad.
20
t > 20
1,6 ± 0,8
[Root face]
(b)COMPOUND BEVEL
t max 22,2
1,6 ± 0,8
[Root face]
(a)PLAIN BEVEL
37,5° ± 2,5°
37,5° ± 2,5°
10° ± 1°
Rad.
20
t > 22,2
1,6 ± 0,8
[Root face]
(b)COMPOUND BEVEL
WELDING BEVEL FOR FITTINGS - MSS SP - 75 (MM)
WELDING BEVEL FOR FITTINGS - ASME B16.9/B16.28 (MM)
NOTE: Plain bevel up to » 25,4 mm at manufacturers optionPlain bevel may be 37,5° up to » 24” at manufacturers option.
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
BEVEL TYPES
[email protected] www.aesteiron.com
N.B SIZE
Inch. mm Sch5s
Sch10s
Sch10
Sch20
Sch30
Sch40s
Std.Wall
Sch40
Sch60
Sch80s
XS Sch80
Sch100
Sch120
Sch140
Sch160
XXS
1/2 15 0,03 0,05 0,06 0,06 0,09 0,09 0,12 0,12
3/4 20 0,04 0,07 0,08 0,08 0,11 0,11 0,15 0,15
1 25 0,07 0,14 0,15 0,15 0,2 0,2 0,28 0,38
1 1/4 32 0,1 0,23 0,26 0,26 0,35 0,35 0,44 0,6
1 1/2 40 0,15 0,3 0,4 0,4 0,55 0,55 0,65 0,95
2 50 0,3 0,5 0,7 0,7 0,95 0,95 1,4 1,7
2 1/2 65 0,55 0,85 1,4 1,4 1,5 1,5 2,5 3,2
3 80 1 1,25 2,5 2,5 2,9 2,9 3,75 5,5
3 1/2 90 1,2 1,65 3 3 4 4 - 8
4 100 1,6 2,1 4 4 6 6 7,5 9 12
5 125 2,7 3,65 6,8 6,8 9,3 9,3 12,7 15 18
6 150 4,4 4,45 11 11 16,8 16,8 23 26 29,5
8 200 8,8 10,2 17,25 19 22 22 27,25 34,8 34,8 38 40,5 52 55 54
10 250 16,8 18,15 25,85 33,15 41,5 41,5 53,9 53,9 53,9 61,16 75 85 97 109
12 300 24 27,25 37,2 49 60 60 61,25 81,7 80 80 107,4 123 140 157 180
14 350 28 39,95 50 59 70 70 70 83,00 109 94 94 135 188 190 224 247,45
16 400 38 51,6 64 78,3 95 95 95 125 162 125 125 202 260 274 323 367
18 450 48 65,4 82 99,85 139,15 120 120 176,15 231,5 158 158 290,55 390 405 422 545
20 500 58,4 84,9 100 146 194 146 146 228,35 311 194 194 390,45 476 508 607 770
22 550 - - 120 - - - 177,97 - - - 236 - - - - -
24 600 88 146 146 220 318,25 220 220 363,15 532,5 282 282 657,85 820 954 1100 1270
APPROXIMATE WEIGHTS IN Kg
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
WEIGHT90° ELBOWS, BUTT-WELD FITTINGS² LONG RADIUS³
34 [email protected] www.aesteiron.com
Long Radius & Short Radius Elbows
Normal Pipe Size
OutsideDiameter
WallThickness
mm inch. mm mm Schedule
Normal Pipe Size
OutsideDiameter
WallThickness
mm inch. mm mm Schedule
Normal Pipe Size
OutsideDiameter
WallThickness
mm inch. mm mm Schedule
15
20
25
32
40
50
65
80
100
125
150
200
250
300
350
400
450
500
600
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
2 1/2"
3"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24
21.3
26.7
33.4
42.2
48.3
60.3
73.0
88.9
114.3
141.3
168.3
219.1
273.9
323.9
355.6
406.4
457.0
508.0
610.00
2.78
3.73
2.87
3.91
3.38
4.55
3.56
4.85
3.68
5.08
3.91
5.54
5.16
7.01
5.49
7.62
6.02
8.56
6.65
9.5
7.11
10.97
8.18
12.7
9.27
12.7
9.52
12.7
9.52
12.7
9.52
12.7
9.52
12.7
9.52
12.7
9.52
12.7
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
N.B SIZE
Inch. mm Sch5s
Sch10s
Sch10
Sch20
Sch30
Sch40s
Std.Wall
Sch40
Sch60
Sch80s
XS Sch80
Sch100
Sch120
Sch140
Sch160
XXS
APPROXIMATE WEIGHTS IN Kg
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
22
24
15 0,02 0,04 0,05 0,05 0,07 0,07
20 0,03 0,05 0,06 0,06 0,08 0,08
25 0,05 0,1 0,11 0,11 0,15 0,15
32 0,08 0,17 0,18 0,18 0,26 0,26
40 0,11 0,23 0,3 0,3 0,39 0,39
50 0,23 0,38 0,53 0,53 0,67 0,67
65 0,41 0,64 1,05 1,05 1,05 1,05
80 0,75 0,94 1,88 1,88 2,03 2,03
90 0,9 1,24 2,25 2,25 2,8 2,8
100 1,2 1,58 3 3 4,2 4,2 4,50
125 2,03 2,74 5,1 5,1 6,5 6,5 9,00
150 3,3 4,09 8,25 8,25 11,75 11,75 13,5
200 6,6 7,65 11,1 11,35 16,5 16,5 18,15 24,35 24,35 26,35 29 32
250 12,45 13,61 17,35 21,35 31,13 31,13 37,7 37,7 37,7 40,85 50 53 62
300 18 20,44 25 33,15 45 45 48 54,5 56 56 68 81,25 92 99
350 21 29,9 37,5 39,5 52,5 52,5 52,5 54,45 74 66 66 93,5 124 120 138,8
400 28,5 38,7 48 52,2 71,25 71,25 71,25 104,3 106,7 104,3 104,3 138 171,5 166 198
450 36 49,05 61,5 65,35 92,15 90 90 118 154,35 110,6 110,6 193 257,4 283 387
500 43,8 63,68 75 109,5 135,8 109,5 109,5 154,35 208 135,8 135,8 261 332 376 430
550 - - 90 - - - - - - - - - - - -
600 66 109,5 109,5 165 214,3 165 165 256,5 355,5 197,5 197,5 443,5 530 621 680
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
WEIGHT90° ELBOWS, BUTT-WELD FITTINGS² LONG RADIUS³
[email protected] www.aesteiron.com
Long Radius & Short Radius Elbows
Normal Pipe Size
OutsideDiameter
WallThickness
mm inch. mm mm Schedule
Normal Pipe Size
OutsideDiameter
WallThickness
mm inch. mm mm Schedule
Normal Pipe Size
OutsideDiameter
WallThickness
mm inch. mm mm Schedule
15
20
25
32
40
50
65
80
100
125
150
200
250
300
350
400
450
500
600
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
2 1/2"
3"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24
21.3
26.7
33.4
42.2
48.3
60.3
73.0
88.9
114.3
141.3
168.3
219.1
273.9
323.9
355.6
406.4
457.0
508.0
610.00
2.78
3.73
2.87
3.91
3.38
4.55
3.56
4.85
3.68
5.08
3.91
5.54
5.16
7.01
5.49
7.62
6.02
8.56
6.65
9.5
7.11
10.97
8.18
12.7
9.27
12.7
9.52
12.7
9.52
12.7
9.52
12.7
9.52
12.7
9.52
12.7
9.52
12.7
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
STD
XS
N.B SIZE
Inch mm Sch5s
Sch10s
Sch10
Sch20
Sch30
Sch40s
Std.Wall
Sch40
Sch60
Sch80s
XS Sch80
Sch100
Sch120
Sch140
Sch160
XXS
APPROXIMATE WEIGHTS IN Kg
1/2 15
3/4 20
1 25
1 1/4 32
1 1/2 40
2 50
2 1/2 65
3 80
3 1/2 90
4 100
5 125
6 150
8 200
10 250
12 300
14 350
16 400
18 450
20 500
22 550
24 600
0,02 0,03 0,03 0,03 0,05 0,05 0,06 0,06
0,02 0,04 0,04 0,04 0,06 0,06 0,08 0,08
0,04 0,07 0,08 0,08 0,1 0,1 0,14 0,19
0,05 0,11 0,13 0,13 0,18 0,18 0,22 0,3
0,08 0,15 0,2 0,2 0,28 0,28 0,33 0,48
0,15 0,25 0,35 0,35 0,46 0,46 0,7 0,85
0,28 0,43 0,7 0,7 0,75 0,75 1,25 1,6
0,5 0,63 1,25 1,25 1,45 1,45 1,88 2,75
0,6 0,83 1,5 1,5 2 2 - 4
0,8 1,05 2 2 3 3 3,75 4,5 5,1
1,35 1,83 3,4 3,4 4,65 4,65 6,35 7,5 9
2,2 2,73 5,5 5,5 8,4 8,4 11,5 13 14,75
4,4 5,1 10 10 11 11 13,6 17,4 17,4 19 20,25 26 27,5 27
8,3 9,08 18,5 15,85 20,75 20,75 26,95 26,95 26,95 30,58 37,5 42,5 48,5 54,4
12 13,63 24,75 24,5 30 30 30,85 40,85 40 40 53,7 61,5 70 78,5 90
14 20,00 25 37 35 35 35 40,85 54,5 47 47 67,5 94 95 112 123,73
19 25,8 32 46,5 47,5 47,5 47,5 62,5 81 62,5 62,5 101 130 137 161,5 183
24 32,7 41 56 69,45 60 60 87,15 115,75 79 79 145,25 195 202,5 211 272,5
29,2 42,45 50 73 97 73 73 113,5 155,5 97 97 195,23 238 254 303,5 385
- - 60 - - - 88,98 - - - 118 - - - - -
44 73 73 110 159 110 110 190,65 266,5 141 141 333,93 410 477 545 635
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
WEIGHT45° ELBOWS, BUTT-WELD FITTINGS
36 [email protected] www.aesteiron.com
Similar to 90 degree elbow functions, 45 degree elbow also exhibits similar functions. However, the measurements for 45 degree dimensions differ from that of a 90 degree elbow.
The radius of 1.5 D is the same for both - 45 and 90 degrees elbow. But the centre to face dimensions for 45 degree elbow does not match the 90 degree LR elbows.
The difference between a long and a short radius elbow is the curvature and length. A sharper turn than a long radius elbow is provided by the short radius elbow.
In a long radius elbow - the radius of curvature is 1.5 times of the nominal diameter whereas for a standard elbow it is 1 times the nominal diameter of the pipe.
General Notes:
N.B SIZE
Inch mm Sch5s
Sch10s
Sch10
Sch20
Sch30
Sch40s
Std.Wall
Sch40
Sch60
Sch80s
XS Sch80
Sch100
Sch120
Sch140
Sch160
XXS
APPROXIMATE WEIGHTS IN Kg
1/2 15 0,01 0,01 0,03 0,03 0,05 0,05
3/4 20 0,02 0,02 0,06 0,06 0,09 0,09
1 25 0,04 0,05 0,1 0,1 0,13 0,13 0,15 0,2
1 1/4 32 0,05 0,07 0,14 0,14 0,19 0,19 0,23 0,3
1 1/2 40 0,08 0,1 0,2 0,2 0,23 0,23 0,3 0,35
2 50 0,1 0,13 0,25 0,25 0,3 0,3 0,55 0,6
2 1/2 65 0,14 0,18 0,35 0,35 0,45 0,45 0,9 1
3 80 0,25 0,36 0,7 0,7 0,85 0,85 1,45 1,8
3 1/2 90 0,4 0,5 1 1 1,3 1,3 - 2,75
4 100 0,43 0,55 1,1 1,1 1,6 1,6 2,5 2,75 3,5
5 125 0,8 1 2 2 2,7 2,7 4 5 5,5
6 150 1,2 1,5 3 3 4,4 4,4 6 7,5 8,1
8 200 2,2 2,75 4,5 5 5,5 5,5 7 8,35 8,35 11 15,5 18,5 15,45 13,15
10 250 3,6 4,45 6 8 9 9 13,6 13,6 13,6 16,25 21 30 28 28,5
12 300 6 7,5 10 13 15 15 19 25,5 22,5 22,5 29,5 32,5 41 42 44,5
14 350 6,4 8,17 14 13,5 16 16 16 24,5 38 27 27 36,3 50 47 52 59,6
16 400 8,4 10,67 18 18 21 21 21 31,5 52,5 31,5 31,5 52,25 64 59 73 79
18 450 10,4 13 22 22 30 26 26 42 66 36 36 72,5 75 88 93 104
20 500 13,6 17 29 34 42 34 34 56,75 94,5 42 42 98,5 96 105 153 170
22 550 - - 35,5 - - - 42 - - - 51 - - - - -
24 600 20,8 26 44 52 74,5 52 52 96,5 120 60 60 150 118 200 250 285
BUTT˝WELD FITTINGSASME B16.9/ MSS SP˝75
WEIGHTEND CAPS, BUTT-WELD FITTINGS
[email protected] www.aesteiron.com
N.B SIZE
Inch mm Sch5s
Sch10s
Sch10
Sch20
Sch30
Sch40s
Std.Wall
Sch40
Sch60
Sch80s
XS Sch80
Sch100
Sch120
Sch140
Sch160
XXS
APPROXIMATE WEIGHTS IN Kg
1/2 15 0,07 0,09 0,16 0,16 0,25 0,25 0,27 0,27
3/4 20 0,09 0,11 0,23 0,23 0,38 0,38 0,47 0,47
1 25 0,14 0,27 0,35 0,35 0,5 0,5 0,86 0,65
1 1/4 32 0,35 0,45 0,9 0,9 1,05 1,05 1,25 1,18
1 1/2 40 0,55 0,65 1,35 1,35 1,5 1,5 1,85 2
2 50 0,68 1,7 1,7 1,7 2,15 2,15 3,18 3
2 1/2 65 1,06 2,18 2,7 2,7 3 3 4 4,5
3 80 1,5 3 3,75 3,75 3,8 3,8 6,58 7,1
3 1/2 90 2 4,05 5 5 5,25 5,25 10,9
4 100 2,6 4,4 6,5 6,5 7,65 7,65 9 17 15
5 125 4 7,42 10 10 13,5 13,5 17,5 25 24
6 150 6,35 12,35 16 16 19,3 19,3 24 39,5 37,6
8 200 10,7 20 23 24,6 27 27 31,75 33 33 43,6 49,5 54 70,35 68
10 250 18 28,15 34,7 40 45 45 60 60 60 67,5 74 93 98,5 120,3
12 300 26 47,45 59 56,6 65 65 70,5 95 78 78 115 136,2 150 176,5 183,85
14 350 40,7 69,9 87,16 94,5 102 102 102 105 135 115 115 165 206 240 275 300
16 400 43,95 72,65 90,8 100 110 110 110 167 206,5 167 167 249 335 330 385 425
18 450 53,95 101,7 127,12 127 164 135 135 237,45 277 190 190 322 380 450 500 590
20 500 67,2 169,8 199,76 168 245 168 168 320 378,65 245 245 459 540 590 720 790
22 550 - - 220 - - - 220 - - - - - - - -
24 600 95,9 306,45 310 240 373 240 240 570,65 653,75 350 350 748 910 1100 1180 1310
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
WEIGHTEQUAL TESS, BUTT-WELD FITTINGS
38
Dimensional Tolerance for pipe fittings as per ASME B16.9
(NPS)NOMINALPIPE SIZE
ALL FITTINGSELBOWS &
TEES
180°RETURNBENDS
180°RETURNBENDS
180°RETURNBENDS
REDUCERS CAPS
Outsidediameter
(OD) at Bevel
Outsidediameter
(OD) at End
WallThickness
Centre-to-End
Dimensions
Centre-to-Centre
Back-to- Face
Alignmentof Ends
OverallLength
OverallLength
½ to 2½
3 to 3 ½
4
5 to 8
10 to 18
20 to 24
26 to 30
32 to 48
0.06-0.03
0.06
0.06
0.09-0.06
0.16-0.12
0.25-0.19
0.25-0.19
0.25-0.19
0.03
0.06
0.06
0.06
0.12
0.19
0.19
0.19
0.06
0.06
0.06
0.06
0.09
0.09
0.12
0.19
0.25
0.25
0.25
0.25
0.38
0.38
....
....
0.25
0.25
0.25
0.25
0.25
0.25
....
....
0.03
0.03
0.03
0.03
0.06
0.06
....
....
0.06
0.06
0.06
0.06
0.09
0.09
0.19
0.19
0.12
0.12
0.12
0.25
0.25
0.25
0.38
0.38
Not lessthan
87.5% ofnominal
thickness
[email protected] www.aesteiron.com
N.B SIZE
Inch mm Sch5s
Sch10s
Sch10
Sch20
Sch30
Sch40s
Std.Wall
Sch40
Sch60
Sch80s
XS Sch80
Sch100
Sch120
Sch140
Sch160
XXS
APPROXIMATE WEIGHTS IN Kg
1/2 15 0,07 0,09 0,16 0,16 0,25 0,25 0,27 0,27
3/4 20 0,09 0,11 0,23 0,23 0,38 0,38 0,47 0,47
1 25 0,14 0,27 0,35 0,35 0,5 0,5 0,86 0,65
1 1/4 32 0,35 0,45 0,9 0,9 1,05 1,05 1,25 1,18
1 1/2 40 0,55 0,65 1,35 1,35 1,5 1,5 1,85 2
2 50 0,68 1,7 1,7 1,7 2,15 2,15 3,18 3
2 1/2 65 1,06 2,18 2,7 2,7 3 3 4 4,2
3 80 1,5 3 3,75 3,75 3,8 3,8 6,13 6,6
3 1/2 90 2 4,05 5 5 5,25 5,25 10,9
4 100 2,6 4,4 6,5 6,5 7,65 7,65 9 15,9 15
5 125 4 7,42 10 10 13,5 13,5 17,5 23 23,15
6 150 5,6 12,35 14 14 19,3 19,3 24 32,7 37,6
8 200 10,7 20 23 24,6 27 27 31,75 33 33 43,6 49,5 49,25 55,6 51
10 250 17,45 26,3 33,15 38,6 43,5 43,5 55 55 55 65,83 63,5 88,5 95 113
12 300 25,25 47,45 59 56,6 63 63 70,5 95 78 78 106,24 124,85 140,85 158 163,45
14 350 40,7 69,9 87,16 94,5 102 102 102 105 135 115 115 162,28 206 235 275 300
16 400 43,95 72,65 90,8 100 110 110 110 167 206,5 167 167 200 335 320 360 410
18 450 53,95 101,7 127,12 127 164 135 135 237,45 256,5 190 190 278,87 380 440 475 550
20 500 67,2 169,8 199,76 168 218 168 168 265,1 350,5 218 218 405,42 540 570 680 770
22 550 - - 220 - - - 220 - - - 280 - - - - -
24 600 94,45 268,99 272 227 373 237 237 390,45 544,8 350 350 606,1 910 1060 1140 1270
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
WEIGHTREDUCING TEES, BUTT-WELD FITTINGS
[email protected] www.aesteiron.com
Specifications for Reducing Tees :
Dimensions : MSS-SP-43,ASME/ANSI B16.9, ASME B16.28,
Size : 1/2"NB - 48"NB IN
Thickness : Schedule 5S, S20, S80, S100, S120, S30, STD, 40S, S40, S60, 10S, 20S, S10, XS, 80S, S140, S160, XXS and others.
Thickness : Schedule 5S, 10S, S140, S160, XXS, 20S, S40, S60, XS, S10, S20, S30, STD, 80S, S80, S100, S120, 40S and thers.
Types of Reducing Tee Buttweld Fitting
Ÿ ASME B16.28 Reducing Tee
Ÿ MSS-SP-43 Reducing Tee
Ÿ Seamless Reducing Tee
Ÿ Buttweld Reducing Tee
Ÿ Buttweld Unequal Tee
Ÿ Forged Reducing Tee
Ÿ Fabricated Pipe Reducing Tee
Ÿ Seamless Unequal Tee Fitting
Ÿ ASME B16.9 Reducing Tee
Ÿ Buttweld Steel Pipe Reducing Tee
N.B SIZE
Inch mm Sch5s
Sch10s
Sch10
Sch20
Sch30
Sch40s
Std.Wall
Sch40
Sch60
Sch80s
XS Sch80
Sch100
Sch120
Sch140
Sch160
XXS
APPROXIMATE WEIGHTS IN Kg
1/2 15
3/4 20 0,03 0,03 0,07 0,07 0,1 0,1 0,15 0,14
1 25 0,05 0,07 0,13 0,13 0,16 0,16 0,23 0,2
1 1/4 32 0,07 0,09 0,18 0,18 0,22 0,22 0,27 0,3
1 1/2 40 0,12 0,14 0,26 0,26 0,35 0,35 0,48 0,45
2 50 0,15 0,23 0,41 0,41 0,57 0,57 0,95 0,9
2 1/2 65 0,32 0,41 0,77 0,77 1,01 1,01 1,35 1,35
3 80 0,4 0,5 1 1 1,35 1,35 1,9 1,8
3 1/2 90 0,55 0,68 1,3 1,3 1,89 1,89 - 3,2
4 100 0,65 0,82 1,6 1,6 2,27 2,27 3,65 3,65 6,35
5 125 1,1 1,35 2,75 2,75 3,92 3,92 6,35 6,35 9
6 150 1,6 2 3,95 3,95 5,94 5,94 7,5 10 14,5
8 200 2,6 3,27 5 5,58 6,5 6,5 8 9,86 9,86 11,8 13,5 16,35 16,5
10 250 4,3 5,45 7,25 8,99 10,7 10,7 14,48 14,48 14,48 17,25 20,45 24,5 28,5 29,5
12 300 6 7,7 9,7 13,21 15 15 16,35 22,25 19,79 19,79 28,15 32,65 38,15 44,25 49
14 350 11 13,6 23 22,25 26,85 26,85 26,85 31,3 41,75 35,55 35,55 52,25 64 73 78 86
16 400 13,25 16,35 28 27,5 33,15 33,15 33,15 44 56,75 44 44 73,5 83 97 112 121
18 450 16 19,98 34 33,5 46,76 40 40 59,5 77,4 53,12 53,12 97,6 116 136 145 159
20 500 24 29,75 50 59,45 79 59,45 59,45 93 124,85 79 79 159 163 178 305 340
22 550 - - 57 - - - 65,35 - - - 86,71 - - - - -
24 600 28,7 36,32 63 71,7 107,14 71,7 71,7 129,4 180,7 95,34 95,34 228 241 295 540 610
NOTE: Weights are of the smallest reduction, i.e. the heaviest
BUTT-WELD FITTINGS
ASME B16.9/ MSS SP-75
WEIGHTCONCENTRIC REDUCERS,BUTT-WELD FITTINGS
40 [email protected] www.aesteiron.com
N.B SIZE
Inch mm Sch5s
Sch10s
Sch10
Sch20
Sch30
Sch40s
Std.Wall
Sch40
Sch60
Sch80s
XS Sch80
Sch100
Sch120
Sch140
Sch160
XXS
APPROXIMATE WEIGHTS IN Kg
NOTE: Weights are of the smallest reduction, i.e. the heaviest
1/2 15
3/4 20 0,03 0,03 0,07 0,07 0,1 0,1 0,15 0,14
1 25 0,07 0,13 0,13 0,16 0,16 0,23 0,2
1 1/4 32 0,07 0,09 0,18 0,18 0,22 0,22 0,27 0,3
1 1/2 40 0,12 0,14 0,26 0,26 0,35 0,35 0,48 0,45
2 50 0,15 0,23 0,41 0,41 0,57 0,57 0,95 0,9
2 1/2 65 0,32 0,41 0,77 0,77 1,01 1,01 1,35 1,35
3 80 0,4 0,5 1 1 1,35 1,35 1,9 1,8
3 1/2 90 0,55 0,68 1,3 1,3 1,89 1,89 - 3,2
4 100 0,65 0,82 1,6 1,6 2,27 2,27 3,65 3,65 6,35
5 125 1,1 1,35 2,75 2,75 3,92 3,92 6,35 6,35 9
6 150 1,6 2 3,95 3,95 5,94 5,94 7,5 10 14,5
8 200 2,6 3,27 5 5,58 6,5 6,5 8 9,86 9,86 11,8 13,5 16,35 16,5
10 250 4,3 5,45 7,25 8,99 10,7 10,7 14,48 14,48 14,48 17,25 20,45 24,5 28,5 29,5
12 300 6 7,7 9,7 13,21 15 15 16,35 22,25 19,79 19,79 28,15 32,65 38,15 44,25 49
14 350 11 13,6 23 22,25 26,85 26,85 26,85 31,3 41,75 35,55 35,55 52,25 64 73 78 86
16 400 13,25 16,35 28 27,5 33,15 33,15 33,15 44 56,75 44 44 73,5 83 97 112 121
18 450 16 19,98 34 33,5 46,76 40 40 59,5 77,4 53,12 53,12 97,6 116 136 145 159
20 500 24 29,75 50 59,45 79 59,45 59,45 93 124,85 79 79 159 163 178 305 340
22 550 - - 57 - - - 65,35 - - - 86,71 - - - - -
24 600 28,7 36,32 63 71,7 107,14 71,7 71,7 129,4 180,7 95,34 95,34 228 241 295 540 610
0,05
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75
WEIGHTECCENTRIC REDUCERS, BUTT-WELD FITTINGS
[email protected] www.aesteiron.com
CONCENTRIC & ECCENTRIC REDUCERS[Standard - ANSI B16.9]
Weights and dimensions for reducers:
Nominal Pipe Size(NPS)
Large End Small End End to End Weight
Inches Kg per pieceMillimeters Inches Millimeters Inches Millimeters
Outside dia. at Bevel Outside dia. at Bevel Dimension 140S/STD
3/4�Þ 1/2 1.05 27 0.84 21 1.50 38 0.06
3/4�Þ 3/8 1.05 27 0.68 17 1.50 38 -
1�Þ 3/4 1.32 33 1.05 27 2.00 51 0.12
1�Þ 1/2 1.32 32 0.84 21 2.00 51 0.11
1 1/4�Þ 1 1.66 42 1.32 33 2.00 51 0.16
1 1/4�Þ 3/4 1.66 42 1.05 27 2.00 51 0.14
1 1/4�Þ 1/2 1.66 42 0.84 21 2.00 51 0.13
1 1/2�Þ 1 1/4 1.90 48 1.66 42 2.50 64 0.24
1 1/2�Þ 1 1.90 48 1.32 33 2.50 64 0.22
1 1/2�Þ 3/4 1.90 48 1.05 27 2.50 64 0.20
1 1/2�Þ 1/2 1.90 48 0.84 21 2.50 64 0.18
2�Þ 1 1/2 2.38 60 1.90 48 3.00 76 0.37
2�Þ 1 1/4 2.38 60 1.66 42 3.00 76 0.35
2�Þ 1 2.38 60 1.32 33 3.00 76 0.32
2�Þ 3/4 2.38 60 1.05 27 3.00 76 0.30
2 1/2�Þ 2 2.88 73 2.38 60 3.50 89 0.72
2 1/2�Þ 1 1/2 2.88 73 1.90 48 3.50 89 0.66
2 1/2�Þ 1 1/4 2.88 73 1.66 42 3.50 89 0.63
2 1/2�Þ 1 2.88 73 1.32 33 3.50 89 -
3�Þ 2 1/2 3.50 89 2.88 73 3.50 89 0.93
3�Þ 2 3.50 89 2.38 60 3.50 89 0.85
3�Þ 1 1/2 3.50 89 1.90 48 3.50 89 0.78
3�Þ 1 1/4 3.50 89 1.66 42 3.50 89 0.75
3 1/2�Þ 3 4.00 102 3.50 89 4.00 102 -
3 1/2�Þ 2 1/2 4.00 102 2.88 73 4.00 102 -
3 1/2�Þ 2 4.00 102 2.38 60 4.00 102 -
3 1/2�Þ 11 /2 4.00 102 1.90 48 4.00 102 -
Reducers 31/2�Þ 11/4, and 4, 5, 6, & 8�Þ 31/2 are also available
4�Þ 3 1/2 4.50 114 4.00 102 4.00 102 -
4�Þ 3 4.50 114 3.50 89 4.00 102 1.45
4�Þ 2 1/2 4.50 114 2.88 73 4.00 102 1.37
4�Þ 2 4.50 114 2.38 60 4.00 102 1.27
4�Þ 1 1/2 4.50 114 1.90 48 4.00 102 1.18
5�Þ 4 5.56 141 4.50 114 5.00 127 2.50
5�Þ 3 5.56 141 3.50
[email protected] www.aesteiron.com
89 5.00 127 2.27
42
Weights and dimensions for reducers:
Nominal Pipe Size(NPS)
Large End Small End End to End Weight
Inches Kg per pieceMillimeters Inches Millimeters Inches Millimeters
Outside dia. at Bevel Outside dia. at Bevel Dimension 140S/STD
5�Þ 2 1/2 5.56 141 2.88 73 5.00 127 2.16
6�Þ 5 6.62 168 5.56 141 5.50 140 3.57
6�Þ 4 6.62 168 4.50 114 5.50 140 3.30
6�Þ 3 6.62 168 3.50 89 5.50 140 3.04
8�Þ 6 8.62 219 6.62 168 6.00 152 5.71
8�Þ 5 8.62 219 5.56 141 6.00 152 5.40
8�Þ 4 8.62 219 4.50 114 6.00 152 5.10
10�Þ 8 10.75 273 8.62 219 7.00 178 9.58
10�Þ 6 10.75 273 6.62 168 7.00 178 8.78
10�Þ 5 10.75 273 5.56 141 7.00 178 8.42
12�Þ 10 12.75 324 10.75 273 8.00 203 13.6
12�Þ 8 12.75 324 8.62 219 8.00 203 12.7
12�Þ 6 12.75 324 6.62 168 8.00 203 11.8
14�Þ 12 14.00 356 12.75 324 13.00 330 25.4
14�Þ 10 14.00 356 10.75 273 13.00 330 23.6
14�Þ 8 14.00 356 8.62 219 13.00 330 21.8
16�Þ 14 16.00 406 14.00 356 14.00 356 31.0
16�Þ 12 16.00 406 12.75 324 14.00 356 29.6
16�Þ 10 16.00 406 10.75 273 14.00 356 27.8
18�Þ 16 18.00 457 16.00 406 15.00 381 37.8
18�Þ 14 18.00 457 14.00 356 15.00 381 35.7
18�Þ 12 18.00 457 12.75 324 15.00 381 34.3
20�Þ 18 20.00 508 18.00 457 20.00 508 56.4
20�Þ 16 20.00 508 16.00 406 20.00 508 53.5
20�Þ 14 20.00 508 14.00 356 20.00 508 50.8
22�Þ 20 22.00 559 20.00 508 20.00 508 62.6
22�Þ 18 22.00 559 18.00 457 20.00 508 59.7
22�Þ 16 22.00 559 16.00 406 20.00 508 57.1
24�Þ 22 24.00 610 22.00 559 20.00 508 68.6
24�Þ 20 24.00 610 20.00 508 20.00 508 65.7
24�Þ 18 24.00 610 18.00 457 20.00 508 63.0
26�Þ 24 26.00 600 24.00 610 24.00 610 -
26�Þ 22 26.00 600 22.00 559 24.00 610 -
26�Þ 20 26.00 600 20.00 508 24.00 610 -
26�Þ 18 26.00 600 18.00 457 24.00 610 -
28�Þ 26 28.00 711 26.00 660 24.00 610 -
28�Þ 24 28.00 711 24.00 610 24.00 610 -
28�Þ 20 28.00 711 20.00 508 24.00 610 -
28�Þ 18 28.00 711 18.00 457 24.00 610 -
30�Þ 28 30.00 762 28.00 711 24.00 610 -
30�Þ 26 30.00 762 26.00 660 24.00 610 -
30�Þ 24 30.00 762 24.00 610 24.00 610 -
[email protected] www.aesteiron.com 43
Weights and dimensions for reducers:
Nominal Pipe Size(NPS)
Large End Small End End to End Weight
Inches Kg per pieceMillimeters Inches Millimeters Inches Millimeters
Outside dia. at Bevel Outside dia. at Bevel Dimension 140S/STD
30�Þ 20 30.00 762 20.00 508 24.00 610 -
32�Þ 30 32.00 813 30.00 762 24.00 610 -
32�Þ 28 32.00 813 28.00 711 24.00 610 -
32�Þ 26 32.00 813 26.00 660 24.00 610 -
32�Þ 24 32.00 813 24.00 610 24.00 610 -
34�Þ 32 34.00 864 32.00 813 24.00 610 -
34�Þ 30 34.00 864 30.00 762 24.00 610 -
34�Þ 26 34.00 864 26.00 660 24.00 610 -
34�Þ 24 34.00 864 24.00 610 24.00 610 -
36�Þ 34 36.00 914 34.00 864 24.00 610 -
36�Þ 32 36.00 914 32.00 813 24.00 610 -
36�Þ 30 36.00 914 30.00 762 24.00 610 -
36�Þ 26 36.00 914 26.00 660 24.00 610 -
36�Þ 24 36.00 914 24.00 610 24.00 610 -
38�Þ 36 38.00 965 36.00 914 24.00 610 -
38�Þ 34 38.00 965 34.00 864 24.00 610 -
38�Þ 32 38.00 965 32.00 813 24.00 610 -
38�Þ 30 38.00 965 30.00 762 24.00 610 -
38�Þ 28 38.00 965 28.00 711 24.00 610 -
38�Þ 26 38.00 965 26.00 660 24.00 610 -
40�Þ 38 40.00 1016 38.00 965 24.00 610 -
40�Þ 36 40.00 1016 36.00 914 24.00 610 -
40�Þ 34 40.00 1016 34.00 864 24.00 610 -
40�Þ 32 40.00 1016 32.00 813 24.00 610 -
40�Þ 30 40.00 1016 30.00 762 24.00 610 -
42�Þ 40 42.00 1067 40.00 1016 24.00 610 -
42�Þ 38 42.00 1067 38.00 965 24.00 610 -
42�Þ 36 42.00 1067 36.00 914 24.00 610 -
42�Þ 34 42.00 1067 34.00 864 24.00 610 -
42�Þ 32 42.00 1067 32.00 813 24.00 610 -
42�Þ 30 42.00 1067 30.00 762 24.00 610 -
44�Þ 42 44.00 1118 42.00 1067 24.00 610 -
44�Þ 40 44.00 1118 40.00 1016 24.00 610 -
44�Þ 38 44.00 1118 38.00 965 24.00 610 -
44�Þ 36 44.00 1118 36.00 914 24.00 610 -
46�Þ 44 46.00 1168 44.00 1118 28.00 711 -
46�Þ 42 46.00 1168 42.00 1067 28.00 711 -
46�Þ 40 46.00 1168 40.00 1016 28.00 711 -
46�Þ 38 46.00 1168 38.00 965 28.00 711 -
48�Þ 46 48.00 1219 46.00 1168 28.00 711 -
48�Þ 44 48.00 1219 44.00 1118 28.00 711 -
48�Þ 42 48.00 1219 42.00 1067 28.00 711 -
48�Þ 40 48.00 1219 40.00 1016 28.00 711 -
[email protected] www.aesteiron.com44
N.B SIZE
Inch mm Sch10
Sch20
Sch30
Std.Wall
Sch40
Sch60
XS Sch80
Sch100
Sch120
Sch140
Sch160
XXS
APPROXIMATE WEIGHTS IN Kg
1/2 15 0,13 0,14 0,3
3/4 20 0,18 0,2 0,35
1 25 0,29 0,38 0,5 0,66
1 1/4 32 0,41 0,54 0,67 0,95
1 1/2 40 0,54 0,67 0,9 1,2
2 50 0,98 1,34 2,01 2,46
2 1/2 65 1,54 2,05 2,69 3,71
3 80 2,1 2,8 3,93 5,18
3 1/2 90 2,47 2,94 6,25
4 100 2,99 4,17 5,27 6,29 7,68
5 125 5,22 7,41 9,6 11,79 13,84
6 150 6,79 10,27 13,04 16,25 19,2
8 200 7,99 8,84 10,28 12,81 15,63 18,21 21,83 24,55 26,79 26,16
10 250 12,1 14,87 17,86 23,8 23,94 28,13 33,57 38,98 45,54 50,45
12 300 14,64 19,29 21,88 23,21 32,23 29,38 38,84 47,32 55,8 62,05 71,43
14 350 18 15,8 28,57 28,57 32,59 44,2 39,73 54,92
16 400 19,75 16,65 32,14 32,14 43,3 56,7 42,86 71,88
18 450 24,25 21,3 44,2 38 56,25 74,2 50 91,52
20 500 36 31,7 55,8 41,96 65,63 88,4 55,81 112,1
22 550 42,95 37 65 46,88 78 109 62,07 142
24 600 50,05 45,55 75,9 50,45 91,52 129 67,41 160
BUTT-WELD FITTINGSASME B16.9
WEIGHTSTUB ENDS, BUTT-WELD FITTINGS
[email protected] www.aesteiron.com 45
N.B SIZE
Inch mm Sch5s
Sch10s
Sch40s
Sch80s
APPROXIMATE WEIGHTS IN Kg
1/2 15 0,03 0,04 0,09 0,12
3/4 20 0,04 0,06 0,12 0,16
1 25 0,06 0,08 0,15 0,22
1 1/4 32 0,08 0,1 0,2 0,31
1 1/2 40 0,11 0,14 0,28 0,39
2 50 0,17 0,2 0,41 0,69
2 1/2 65 0,25 0,33 0,66 1,05
3 80 0,35 0,44 0,89 1,46
3 1/2 90 0,5 0,63 1,26 1,54
4 100 0,61 0,76 1,52 2,49
5 125 1,06 1,33 2,66 3,55
6 150 1,2 1,51 3,02 5,49
8 200 2,09 2,61 5,22 9,97
10 250 3,63 4,54 9,08 13,75
12 300 5,33 6,67 13,25 19,64
14 350 5,81 7,26 14,53 29
16 400 6,54 8,17 16,34 37,5
18 450 7,72 9,65 19,3 49,25
20 500 8,54 10,67 21,34 60
22 550 9,8 11,6 23 77,5
24 600 10,26 12,83 25,65 88,25
BUTT-WELD FITTINGSMSS SP-43
WEIGHTSTUB ENDS, BUTT-WELD FITTINGS
[email protected] www.aesteiron.com46
BT
C
90° ELBOWS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
B 22,4 22,4 25,4 33,3 38,1 46,0 55,6 62,0 75,4 91,9 109,5 146,1
C 20,6 20,6 24,6 28,4 33,3 38,1 44,5 50,8 60,5 76,2 85,9 106,4
2000 LB T 3,2 3,2 3,2 3,2 3,2 3,7 3,9 4,0 4,3 5,6 6,0 6,6
App Wt Kg
0,14 0,14 0,13 0,22 0,32 0,47 0,74 0,93 1,54 2,98 4,54 13,28
B 22,4 25,4 33,3 38,1 46,0 55,6 62,0 75,4 84,1 101,6 120,7 152,4
C 20,6 24,6 28,4 33,3 38,1 44,5 50,8 60,5 63,5 82,6 95,3 114,3
3000 LB T 3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,6 5,5 7,6 8,8 11,2
0,14 0,14 0,27 0,42 0,65 1,04 1,3 2,22 2,47 7,34 7,78 13,28
B 25,4 33,3 38,1 46,0 55,6 62,0 75,4 84,1 101,6 120,7 146,1 152,4
C 24,6 28,4 33,3 38,1 44,5 50,8 60,5 76,2 82,6 95,3 106,4 114,3
6000 LB 6,4 6,6 7,0 8,2 8,5 9,9 10,6 11,1 12,1 15,3 16,9 18,7
0,30 0,30 0,46 0,72 1,16 1,62 2,67 3,21 7,94 9,85 18,00 18,00
App Wt Kg
T
App Wt Kg
NOTE: Dimensions in mm
FORGED FITTINGS | THREADEDASME B16.11
ELBOWS
[email protected] www.aesteiron.com 47
B
C
T
C
45° ELBOWS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
B
C
2000 LB T
App Wt Kg
B
C
3000 LB T
B
C
6000 LB
App Wt Kg
T
App Wt Kg
NOTE: Dimensions in mm
22,4 22,4 25,4 33,3 38,1 46,0 55,6 62,0 75,4 91,9 109,5 146,1
17,5 17,5 19,1 22,4 25,4 28,4 33,3 35,1 42,9 52,3 63,5 79,2
3,2 3,2 3,2 3,2 3,2 3,7 3,9 4,0 4,3 5,6 6,0 6,6
0,12 0,12 0,11 0,30 0,37 0,41 0,64 0,75 1,19 3,46 5,45 9,50
22,4 25,4 33,3 38,1 46,0 55,6 62,0 75,4 84,1 101,6 120,7 152,4
17,5 19,1 22,4 25,4 28,4 33,3 35,1 42,9 43,7 52,3 63,5 79,2
3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,6 7,1 7,6 8,8 11,2
0,12 0,12 0,37 0,34 0,54 0,92 0,97 1,84 1,93 3,46 5,45 9,5
25,4 33,3 38,1 46,0 55,6 62,0 75,4 84,1 101,6 120,7 146,1 152,4
19,1 22,4 25,4 28,4 33,3 35,1 42,9 43,7 52,3 63,5 79,2 79,2
6,4 6,6 7,0 8,2 8,5 9,9 10,6 11,1 12,1 15,3 16,6 18,7
0,41 0,41 0,39 0,61 1,02 1,18 2,07 2,61 4,37 7,00 14,16 14,16
FORGED FITTINGS THREADED|ASME B16.11
ELBOWS
[email protected] www.aesteiron.com48
B
A
C
C
D
A
E
90° ELBOWS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A
B
3000 LB C
App Wt Kg
A
B
6000 LB C
App Wt Kg
NOTE: Dimensions in mm
D
E
D
E
11,2 11,2 13,5 15,7 19,1 22,4 26,9 31,8 38,1 41,1 57,2 66,5
10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1 73,8 89,8 115,4
3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,5 6,0 7,7 8,3 9,3
6,1 8,5 11,8 15,0 20,2 25,9 34,3 40,1 51,7 61,2 77,9 100,7
9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7 15,7 15,7 19,1
0,12 0,12 0,11 0,22 0,31 0,47 0,67 0,90 1,36 2,80 4,40 13,30
11,2 13,5 15,7 19,1 22,4 26,9 31,8 38,1 41,1
10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1
3,4 4,0 4,4 5,2 6,0 6,9 6,9 7,8 9,5
3,2 5,6 8,4 11,0 14,8 19,9 28,7 33,2 42,1
9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7
0,3 0,3 0,3 0,40 0,62 1,02 1,32 2,37 2,72
FORGED FITTINGS | SOCKET WELDASME B16.11
ELBOWS
[email protected] www.aesteiron.com 49
B
C
C
A
E
D
45° ELBOWS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A
B
3000 LB C
App Wt Kg
A
B
6000 LB C
App Wt Kg
NOTE: Dimensions in mm
D
E
D
E
7,9 7,9 7,9 11,2 12,7 14,2 17,5 20,6
10,7 14,1 17,5 21,7 27,1 33,8 42,5
3,2 3,3 3,5 4,1 4,3 5,0 5,3
6,1 8,5 11,8 15,0 20,2 25,9 34,3
9,7 9,7 9,7 9,7 12,7 12,7 12,7
0,09 0,09 0,09 0,26 0,35 0,38 0,61
7,9 7,9 11,2 12,7 14,2 17,5 20,6
10,7 14,1 17,5 21,7 27,1 33,8 42,5
3,4 4,0 4,4 5,2 6,0 7,0 6,9
3,2 5,6 8,4 11,0 14,8 19,9 28,7
9,7 9,7 9,7 9,7 12,7 12,7 12,7
0,25 0,25 0,25 0,31 0,52 0,92 1,02
25,4 28,4 31,8 41,1
48,6 61,1 73,8 89,8 115,4
5,5 6,0 7,7 8,3 9,3
40,1 51,7 61,2 77,9 100,7
12,7 15,7 15,7 15,7 19,1
0,71 1,14 3,36 4,7 9,0
25,4 28,4
48,6 61,1
7,8 9,50
33,2 42,1
12,7 15,7
1,92 2,28
FORGED FITTINGS SOCKET WELD|ASME B16.11
ELBOWS
[email protected] www.aesteiron.com50
T
C
B
MALE/FEMALE - 90° STREET ELBOWS
Rating Dims 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"
NOTE: Dimensions in mm
B
C
3000 LB T
App Wt Kg
25,4 33,3 38,1 46,0 55,6 62,0 75,4 84,1
24,6 28,4 33,3 38,1 44,5 50,8 60,5 63,5
3,3 3,5 4,1 4,3 5,0 5,3 5,6 7,1
0,12 0,17 0,23 0,40 0,66 1,03 1,37 2,30
FORGED FITTINGS THREADED|ASME B16.11
ELBOWS
[email protected] www.aesteiron.com
Standard elbows presents itself in various forms such as 45 degrees, 90 degrees and the less common 22.5 degree angles.
Elbows are available in many variety such as Threaded, Weldable, Flanged and Socketed.
With respect to the Threaded Elbows: the Male-X-Male and Female-X-Female Connections are the most common.
Generally, elbows have the same size connecting on both ends. But when one is smaller than the other, then that particular fitting is called a 'Reducing Elbow'.
Clients must consider these factors when selecting the right elbow for the project.
Weights (kg) for Product Ranges
DINSchedule 10S
90° Elbow 45° Elbow
Schedule 40S
90° Elbow 45° ElbowDIN
Schedule 10S
90° Elbow 45° Elbow
Schedule 40S
90° Elbow 45° Elbow
15 0.06 0.03 0.08 0.04
20 0.07 0.03 0.08 0.04
25 0.14 0.08 0.15 0.11
32 0.23 0.11 0.26 0.17
40 0.30 0.17 0.40 0.23
50 0.50 0.25 0.70 0.40
65 0.85 0.48 1.40 0.77
80 1.25 0.63 2.20 1.08
100 2.10 1.08 4.47 1.47
125 3.65 1.82 6.80 2.84
150 5.45 2.72 10.89 5.44
200 10.20 5.33 21.54 10.77
250 18.15 9.75 38.56 19.27
300 25.80 13.62 59.42 29.71
350 36.29 18.37 79.38 35.15
400 47.63 23.81 99.79 45.81
450 59.87 29.94 129.73 59.40
500 99.80 49.90 162.38 74.84
600 140.61 70.31 225.89 105.23
51
C
B
T
C
TEES
NOTE: Dimensions in mm
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
B
C
2000 LB T
App Wt Kg
B
C
3000 LB T
B
C
6000 LB
App Wt Kg
T
App Wt Kg
22,4 22,4 25,4 33,3 38,1 46,0 55,6 62,0 75,4 91,9 109,5 146,1
20,6 20,6 24,6 28,4 33,3 38,1 44,5 50,8 60,5 76,2 85,9 106,4
3,2 3,2 3,2 3,2 3,2 3,7 3,9 4,0 4,3 5,6 6,0 6,6
0,17 0,17 0,16 0,32 0,43 0,61 0,96 1,25 1,93 4,11 6,13 17,20
22,4 25,4 33,3 38,1 46,0 55,6 62,0 75,4 84,1 101,6 120,7 152,4
20,6 24,6 28,4 33,3 38,1 44,5 50,8 60,5 63,5 82,6 95,3 114,3
3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,6 7,1 7,6 8,8 11,2
0,2 0,2 0,38 0,56 0,84 1,36 1,65 3,1 3,18 8,80 9,50 17,2
25,4 33,3 38,1 46 55,6 62,0 75,4 84,1 101,6 120,7 146,1 152,4
24,6 28,4 33,3 38,1 44,5 50,8 60,5 76,2 82,6 95,3 106,4 114,3
6,4 6,6 7,0 8,2 8,5 9,9 10,6 12,1 12,1 15,3 16,6 18,7
0,42 0,42 0,63 0,98 1,65 2,19 3,32 4,42 8,50 13,10 24,00 24,00
FORGED FITTINGS THREADED|ASME B16.11
TEES
[email protected] www.aesteiron.com52
D
A
B
C
C
A A
E
TEES - EQUAL AND REDUCING
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A
B
3000 LB C
App Wt Kg
A
B
6000 LB C
App Wt Kg
NOTE: Dimensions in mm
D
E
D
E
11,2 11,2 13,5 15,7 19,1 22,4 26,9 31,8 38,1 41,1 57,2 66,5
10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1 73,8 89,8 115,4
3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,5 6,05 7,7 8,3 9,3
6,1 8,5 11,8 15,0 20,2 25,9 34,3 40,1 51,7 61,2 93,5 100,7
9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7 15,7 15,7 19,1
0,12 0,12 0,10 0,21 0,31 0,47 0,67 0,90 1,36 2,80 4,40 13,30
11,2 13,5 15,7 19,1 22,4 26,9 31,8 38,1 41,1
10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1
3,4 4,0 4,4 5,2 6,0 7,0 6,9 7,8 9,5
3,2 5,6 8,4 11,0 14,8 19,9 28,7 33,2 42,1
9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7
0,12 0,12 0,18 0,40 0,62 1,02 1,32 2,37 2,72
FORGED FITTINGS | SOCKET WELDASME B16.11
TEES
[email protected] www.aesteiron.com 53
C D
D
TYPE 1
D
E D F
B
TYPE 3
A
CD
B
TYPE 2
A
C
REDUCING INSERTS (3000 LB)
NB C D A B E F Type
NOTE: Dimensions in mm
1/2" x 3/8" 47 17,5 10,9 23,9 25,9 1
1/2" x 1/4" 47 14,0 9,4 16,0 2
3/4" x 1/2" 26,9 21,6 12,4 25,4 32,0 1
3/4" x 3/8" 26,9 17,5 10,9 14,0 2
3/4" x 1/4" 26,9 14,0 9,4 16,0 22,1 3
1" x 3/4" 33,5 27,2 14,5 28,4 38,1 1
1" x 1/2" 33,5 21,6 12,4 20,6 2
1" x 3/8" 33,5 16,5 10,9 22,1 25,9 3
1" x 1/4" 33,5 14,0 9,4 23,9 22,1 3
1 1/4" x 1" 42,4 33,8 16,0 32,0 45,0 1
1 1/4" x 3/4" 42,4 27,2 14,5 20,6 2
1 1/4" x 1/2" 42,4 21,6 12,4 22,1 32,0 3
1 1/4" x 1 1/4" 42,4 42,5 17,5 33,0 56,9 1
1 1/4" x 1" 42,4 33,8 16,0 20,6 2
1 1/2" x 3/4" 48,4 27,2 14,5 22,1 38,1 3
1 1/2" x 1/2" 48,4 21,6 12,4 24,1 32,0 3
2" x 1 1/2" 60,6 48,8 19,1 20,6 2
2" x 1 1/4" 60,6 42,7 17,5 22,1 56,9 3
2" x 1" 60,6 33,8 16,0 24,1 45,0 3
2" x 3/4" 60,6 27,2 14,5 25,4 38,1 3
2" x 1/2" 60,6 21,6 12,4 26,9 32,0 3
FORGED FITTINGS | SOCKET WELDASME B16.11
REDUCERS
[email protected] www.aesteiron.com54
A
B
F
HEXAGON HEAD BUSH
NOTE: Dimensions in mm
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A
B3000 LB
F
App Wt Kg
+
6000 LB
- 11,2 12,7 14,2 15,7 19,1 20,6 20,6 22,4 26,9 28,4 31,8
- 3,0 4,1 4,8 5,6 6,4 7,1 7,9 8,6 9,7 10,4 12,7
- 15,7 17,5 22,4 26,9 35,1 44,5 50,8 63,5 76,2 88,9 117,3
- 0,02 0,03 0,04 0,07 0,10 0,20 0,30 0,45 0,54 1,17 3,15
FORGED FITTINGS THREADED |ASME B16.11
BUSHINGS
[email protected] www.aesteiron.com 55
B
T
A
CAPS
NOTE: Dimensions in mm
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A
B
3000 LB T
App Wt Kg
A
B
6000 LB T
App Wt Kg
15,7 19,1 22,4 28,4 35,1 44,5 57,2 63,5 76,2 91,9 108,0 139,7
19,1 25,4 25,4 31,8 36,6 41,1 44,5 44,5 47,8 60,5 65,0 68,3
4,8 4,8 4,8 6,4 6,4 9,7 9,7 11,2 12,7 15,7 19,1 22,4
0,04 0,04 0,05 0,10 0,18 0,33 0,60 0,70 1,06 1,84 1,65 4,57
22,4 25,4 31,8 38,1 44,5 57,2 63,5 76,2 91,9 108,0 127,0 158,8
25,4 26,9 26,9 33,3 38,1 42,9 46,0 47,8 50,8 63,5 68,3 74,7
6,4 6,4 6,4 7,9 7,9 11,2 11,2 12,7 15,7 19,1 22,4 28,4
0,06 0,06 0,09 0,14 0,20 0,34 0,60 1,77 1,47 2,10 2,50 6,30
FORGED FITTINGS THREADED| ASME B16.11
CAPS
[email protected] www.aesteiron.com56
E
H
B C
CAPS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
B
C
3000 LB E
App Wt Kg
B
C
6000 LB E
App Wt Kg
NOTE: Dimensions in mm
H
H
10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1 73,8 89,8 115,4
3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,5 6,00 7,7 8,3 9,3
9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7 15,7 15,7 19,1
4,8 4,8 4,8 6,4 6,4 9,7 9,7 11,2 12,7 15,7 19,1 22,4
0,01 0,04 0,05 0,10 0,16 0,22 0,41 0,51 0,85 1,25 1,95 3,36
10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1
3,4 4,0 4,4 5,2 6,0 6,9 6,9 7,8 10,4
9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7
6,4 6,4 6,4 7,9 7,9 11,2 11,2 12,7 15,7
0,15 0,15 0,15 0,19 0,27 0,53 0,64 0,97 1,64
FORGED FITTINGS | SOCKET WELDASME B16.11
CAPS
[email protected] www.aesteiron.com 57
B
C
CROSSES
NOTE: Dimensions in mm
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
B
C
2000 LB T
App Wt Kg
B
C
3000 LB T
App Wt Kg
B
C
6000 LB T
App Wt Kg
22,4 22,4 25,4 33,3 38,1 46,0 55,6 62,0 75,4 91,9 109,5 146,1
17,5 17,5 19,1 22,4 25,4 28,4 33,3 35,1 42,9 52,3 63,5 79,2
3,2 3,2 3,2 3,2 3,2 3,7 3,9 4,0 4,3 5,6 6,0 6,6
0,21 0,21 0,18 0,37 0,48 0,75 1,07 1,49 2,27 5,30 8,20 19,00
22,4 25,4 33,3 38,1 46,0 55,6 62,0 75,4 84,1 101,6 120,7 152,4
17,5 19,1 22,4 25,4 28,4 33,3 35,1 42,9 43,7 52,3 63,5 79,2
3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,6 7,1 7,6 8,8 11,2
0,21 0,21 0,43 0,66 1,05 1,69 1,99 3,69 3,77 9,50 13,00 19,00
25,4 33,3 38,1 46,0 55,6 62,0 75,4 84,1 101,6 120,7 146,1 152,4
19,1 22,4 25,4 28,4 33,3 35,1 42,9 43,7 52,3 63,5 79,2 79,2
6,4 6,6 7,0 8,2 8,5 9,9 10,6 11,1 12,1 15,3 16,6 18,7
0,51 0,51 0,70 1,17 1,91 2,56 4,35 5,17 12,00 16,50 28,00 -
FORGED FITTINGS THREADED|ASME B16.11
CROSSES
[email protected] www.aesteiron.com58
B
A
C
E
CROSSES
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A
B
3000 LB C
App Wt Kg
A
B
6000 LB C
App Wt Kg
NOTE: Dimensions in mm
D
E
D
E
11,2 11,2 13,5 15,7 19,1 22,4 26,9 31,8 38,1 41,1 57,2 66,5
10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1 68,7 89,8 115,4
3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,5 6,0 7,7 8,3 9,3
6,1 8,5 11,8 15,0 20,2 25,9 34,3 40,1 51,7 61,2 77,9 100,6
9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7 15,7 15,7 19,1
0,18 0,18 0,15 0,36 0,45 0,76 1,09 1,45 2,35 4,5 7,8 21,5
11,2 13,5 15,7 19,1 22,4 26,9 31,8 38,1 41,1
10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1
3,4 4,0 4,4 5,2 6,0 7,0 6,9 7,8 9,50
3,2 5,6 8,4 11,0 14,8 19,9 28,7 33,2 42,1
9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7
0,62 0,62 0,62 0,63 1,04 1,71 2,11 3,95 4,22
FORGED FITTINGS SOCKET WELD|ASME B16.11
CROSSES
[email protected] www.aesteiron.com 59
B
A
B
A
COUPLINGS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A
B3000 LB
App Wt Kg
NOTE: Dimensions in mm
A
B6000 LB
App Wt Kg
15,7 19,1 22,4 28,4 35,1 44,5 57,2 63,5 76,2 91,9 108,0 139,7
31,8 35,1 38,1 47,8 50,8 60,5 66,5 79,2 85,9 91,9 108,0 120,7
0,04 0,04 0,06 0,13 0,19 0,39 0,68 0,99 1,37 2,07 3,08 5,44
22,4 25,4 31,8 38,1 44,5 57,2 63,5 76,2 91,9 108,0 127,0 158,8
31,8 35,1 38,1 47,8 50,8 60,5 66,5 79,2 85,9 91,9 108,0 120,7
0,06 0,06 0,18 0,31 0,41 0,85 1,05 1,81 3,40 4,19 6,10 10,03
B
A
HALF COUPLINGS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A
B3000 LB
App Wt Kg
NOTE: Dimensions in mm
A
B6000 LB
App Wt Kg
15,7 19,1 22,4 28,4 35,1 44,5 57,2 63,5 76,2 91,9 108 139,7
16,0 17,5 19,1 23,9 25,4 30,2 33,3 39,6 42,9 46,0 54,1 60,5
0,02 0,02 0,03 0,06 0,09 0,2 0,34 0,50 0,69 1,04 1,54 2,73
22,4 25,4 31,8 38,1 44,5 57,2 63,5 76,2 91,9 108,0 127,0 158,8
16,0 17,5 44,5 23,9 25,4 30,2 33,3 39,6 42,9 46,0 54,1 60,5
0,03 0,03 0,09 1,16 0,21 0,43 0,53 1,91 1,70 2,10 3,05 5,03
FORGED FITTINGS THREADED|ASME B16.11
COUPLINGS AND HALF COUPLINGS
[email protected] www.aesteiron.com60
E
A
COUPLING
B
HALF COUPLING
CD
E
F
B CD
COUPLINGS AND HALF COUPLINGS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A
B
3000 LB C
App Wt Kg
A
B
6000 LB C
NOTE: Dimensions in mm
D
D
E
E
App Wt Kg
6,4 6,4 6,4 9,7 9,7 12,7 12,7 12,7 19,1 19,1 19,1 19,1
10,7 14,1 17,5 21,8 27,1 33,8 42,5 48,6 61,1 73,8 89,8 115,4
3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,5 5,80 7,7 8,3 9,3
6,1 8,5 11,8 15,0 20,2 25,9 34,3 40,1 51,0 61,2 77,9 100,7
9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7 15,7 15,7 19,1
15,7 15,7 17,5 22,4 24,4 28,4 30,2 31,8 41,1 42,9 44,5 47,8
0,05 0,05 0,06 0,13 0,18 0,26 0,48 0,57 0,92 1,4 1,8 3,23
6,4 6,4 6,4 9,7 9,7 12,7 12,7 12,7 19,1
10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1
3,4 4,0 4,4 17,9 6,0 7,1 6,9 7,8 9,50
3,2 5,6 8,4 11,0 14,8 19,9 28,7 33,2 42,1
9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7
15,7 15,7 17,5 22,4 23,9 28,4 30,2 31,8 41,1
0,1 0,1 0,18 0,23 0,32 0,64 0,72 1,17 2,08
FORGED FITTINGS | SOCKET WELDASME B16.11
COUPLINGS AND HALF COUPLINGS
[email protected] www.aesteiron.com
General Note :
Ÿ The couplings are used to fix or join two straight pieces of pipe of equal diameter.
Ÿ Couplings presents itself as a reducer or reducing coupling.
Ÿ The Union fitting are similar to couplings because they connect equal/similar pipes.
Ÿ The half-coupling is often used for connecting Hoses. They are threaded on one end while the other end is welded/fastened to piping.
61
B
A
C
SQUARE HEAD PLUGS
NOTE: Dimensions in mm
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A
B
6000 LB C
App Wt Kg
D
A
E
+
3000 LB
ROUND HEAD PLUGS
NOTE: Dimensions in mm
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A
D
6000 LB E
App Wt Kg
+
3000 LB
A
H
E
HEXAGON HEAD PLUGS
NOTE: Dimensions in mm
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A
H
6000 LB F
App Wt Kg
+
3000 LB
9,7 11,2 12,7 14,2 15,7 19,1 20,6 20,6 22,4 26,9 28,4 31,8
6,4 6,4 7,9 9,7 11,2 12,7 14,2 15,7 17,5 19,1 20,6 25,4
7,1 9,7 11,2 14,2 15,7 20,6 23,9 28,4 33,3 38,1 42,9 63,5
0,01 0,01 0,03 0,05 0,08 0,16 0,27 0,38 0,63 0,95 1,54 3,85
9,7 11,2 12,7 14,2 15,7 19,1 20,6 20,6 22,4 26,9 28,4 31,8
35,1 41,1 41,1 44,5 44,5 50,8 50,8 50,8 63,5 69,9 69,9 76,2
10,4 13,5 17,5 21,3 26,9 33,3 42,9 48,5 60,5 73,2 88,9 114,3
0,03 0,04 0,07 0,12 0,19 0,34 0,55 0,72 1,41 2,20 3,26 6,00
9,7 11,2 12,7 14,2 15,7 19,1 20,6 20,6 22,4 26,9 28,4 31,8
6,4 6,4 7,9 7,9 9,7 9,7 14,2 15,7 17,5 19,1 20,6 25,4
11,2 15,7 17,5 22,4 26,9 35,1 44,5 50,8 63,5 76,2 88,9 117,3
0,02 0,26 0,05 0,07 0,18 0,25 0,45 0,60 1,16 1,75 2,50 6,00
FORGED FITTINGS THREADED|ASME B16.11
PLUGS
[email protected] www.aesteiron.com62
L
PIPE NIPPLES
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
BS3799 (min)
ASME B16.11
HEXAGON NIPPLES - EQUAL AND REDUCING
1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
Length 'L' 100 mm is our standard, but any length will be provided on request
Pipe wall Available in any Standard Schedule, eg Sch 80 - 3000 lb, Sch XXS - 6000 lb
End types Threaded, bevelled or plain
C CB
H - AT FLATS S
D
6000 LB
3000 LB
B 6,1 6,1 7,9 7,9 9,9 9,9 12,4 16,0 17,0 19,1 20,6 25,4
C 9,7 11,2 12,7 14,2 15,7 19,1 20,6 20,6 22,4 26,9 28,4 31,8
9,9 15,0 16,0 20,1 21,1 24,9 - 25,9 26,9 40,9 41,9 45,0
4,8 7,9 10,9 14,0 19,1 23,9 32,5 38,0 49,0 59,0 73,8 97,2
2,0 6,1 7,9 10,9 13,0 17,0 22,9 30,0 39,1 45,0 58,4 80,0
11,0 15,0 18,0 22,1 26,9 35,1 46,0 50,0 62,0 75,9 94,0 118,1
0,02 0,02 0,03 0,05 0,09 0,16 0,34 0,33 0,72 1,10 1,30 2,40App
Wt Kg
C
D
D
H
NOTE: Dimensions in mm
L
1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
CLOSE TAPER NIPPLES
Standard ‘L’Length
19,1 25,4 28,6 31,8 38,1 44,5 50,8 50,8 50,8 60,3 76,2 88,9
NOTE: Available in and Standard Production Schedule Wall Thickness, e.g. Sch 40, 80, 160, XXS
FORGED FITTINGS THREADED|BS 3799/ASME B16.11
PIPE NIPPLES
[email protected] www.aesteiron.com 63
D
A
C
UNIONS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A
B
3000 LB C
App Wt Kg
A
B
6000 LB C
App Wt Kg
NOTE: Dimensions in mm
D
D
39,9 42,9 48,0 50,8 56,9 64,0 70,1 79,0 88,9 118,1 120,9 -
32,0 32,0 36,1 42,9 50,0 59,9 70,1 78,0 95,0 125,0 140,0 -
16,0 18,0 19,1 21,1 23,9 24,9 29,0 30,0 37,1 48,0 50,8 -
17,0 19,1 22,1 30,0 36,1 40,9 50,0 59,9 70,1 85,1 100,1 -
0,14 0,14 0,20 0,35 0,43 0,65 0,98 1,26 2,00 4,50 7,00 -
44,5 44,5 50,8 60,5 57,2 57,2 76,2 88,9 108,0 108,0 127,0 -
39,6 39,6 42,9 53,8 58,4 73,2 79,2 88,9 120,7 152,4 190,5 -
22,4 22,4 26,9 26,9 26,9 34,8 34,8 34,8 47,8 53,8 50,8 -
23,9 23,9 31,8 36,6 44,5 55,6 63,5 76,2 88,9 108 127 -
0,2 0,2 0,4 0,60 0,8 0,9 1,35 2,5 5,00 7,00 12,00 -
A
D
C
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"
A
B
3000 LB C
App Wt Kg
D
UNISONS - MALE X FEMALE, THREADED X THREADED, SOCKET WELD X TREADED
1,95 2,13 2,39 2,56 2,86 3,27 3,57 3,92 4,38
1,26 1,26 1,42 1,69 1,97 2,36 2,76 3,07 3,74
0,63 0,71 0,75 0,83 0,94 1,0 1,14 1,18 1,5
0,67 0,75 0,87 1,2 1,42 1,61 1,97 2,36 2,8
0,16 0,16 0,22 0,38 0,45 0,7 1,00 1,35 2,20
FORGED FITTINGS THREADED|BS 3799
UNIONS
[email protected] www.aesteiron.com64
A
BDF
C
A
E
UNIONS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A
B
3000 LB
C
App Wt Kg
A
B
6000 LB C
NOTE: Dimensions in mm
D
D
E
E
App Wt Kg
F
F
37,1 37,1 37,1 38,1 46,0 52,1 54,1 55,9 68,1 88,9 96,0 158,8
10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1 73,8 89,8 115,4
3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,5 6,0 7,7 8,3 9,3
6,1 8,5 11,8 15,0 20,2 25,9 34,3 40,1 51,7 61,2 77,9 100,7
9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7 15,7 15,7 19,1
32,0 32,0 36,1 42,9 50,0 59,9 70,1 78,0 95,0 125,0 140,0 190,5
0,14 0,2 0,2 0,35 0,43 0,65 0,98 1,26 2,0 4,5 7,0 12,0
- 44,5 50,8 60,5 57,2 57,2 76,2 88,9 108,0 108,0 127,0 158,8
- 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1 73,8 89,8 115,4
- 4,0 4,4 5,2 6,0 7,0 6,9 7,8 9,50 10,4 12,1 18,5
- 5,6 8,4 11,0 14,8 19,9 28,7 33,2 42,1 54,0 66,7 87,3
- 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7 15,7 15,7 35,1
- 39,6 42,9 53,8 58,4 73,2 79,2 88,9 114,3 152,4 190,5 190,5
- 0,2 0,4 0,60 0,8 0,9 1,35 2,5 5,0 7,0 12,0 14,0
FORGED FITTINGS - SOCKET WELDBS 3799
UNIONS
[email protected] www.aesteiron.com
Specification :Ÿ Standards : [ANSI/ASME] ASTM SA182, ASTM A182 Ÿ Class : 2000LBS/3000LBS/6000LBSŸ Size Range : From 1/8' NB - 4" NBŸ Dimensions : MSS SP-79, 3799, 97, 95, 83, ASME
16.11, MSS SP-95, BS 3799.
Unions being similar to couplings help connect two pipes that are similar to each other. With respect to pipe unions, a nut / threaded ring being in the middle of the fitting is tightened for the purpose of joining two pipes. For disconnecting a coupling, it must be cut out.
[Material & Grades]: Socket Weld UnionŸ Stainless Steel : F11, F12, F91, ASTM A182 F304,
F304L, F904L, ASTM A312/A43 TP 304, TP316, TP316L, F309S, F309S, F310H, F347, F 347H, F316TI, F316H, F316LN and others.
Ÿ Carbon Steel : A234 WPB, ASTM A105, A106 Gr.B, A350 LF2.
Ÿ Duplex Steel : S32205, ASTM/ASME A182 / SA182, A790 / SA790 UNS No S31803.
Ÿ Super Duplex : A790 / SA790 UNS No S32750, S32950, ASTM/ASME A182.
65
L
Large and Dimension 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
Standard Length ‘L’
BS 3799
SWAGED NIPPLES CONCENTRIC AND ECCENTRIC, THREADED/PLAIN/BEVELLED
63,5 69,9 69,9 76,2 88,9 101,6 114,3 165,1 177,8 203,2 228,6
76,2 88,9 95,3 101,6 - 114,3 165,1 177,8 203,2 228,6
NOTE: Dimensions in mm
FORGED FITTINGS | THREADEDBS 3799/ASME B16.11
SWAGE NIPPLES
[email protected] www.aesteiron.com66
A
45°
B
Rating Dims 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"
A
B
6000 LB App Wt
Kg
WELDING BOSS - THREADED
3000 LB
+
41,4 44,5 50,8 50,8 50,8 50,8 50,8 50,8
31,8 35,1 38,1 44,5 57,2 63,5 75,9 91,9
0,24 0,30 0,37 0,50 0,80 0,90 1,29 1,78
NOTE: Dimensions in mm
A
E
45°
BD
Rating Dims 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"
A
B
6000 LB C
App Wt Kg
D
E
WELDING BOSS - THREADED
3000 LB
+
41,4 44,5 50,8 50,8 50,8 50,8 50,8 50,8
31,8 35,1 38,1 44,5 57,2 63,5 75,9 91,9
14,0 17,5 21,7 27,1 33,8 42,6 48,7 61,1
9,5 11,0 12,7 14,5 16,0 17,5 19,1 22,1
0,23 0,29 0,38 0,53 0,83 0,92 1,31 1,86
THROUGH BORE, Sch 40 - 3000 lb, Sch 160 - 6000 lb
NOTE: Dimensions in mm
FORGED FITTINGSBS 3799/ASME B16.11
BOSSES
[email protected] www.aesteiron.com 67
L2
L1
E1E0
Conicityover 1/16 Ø
90°
30° 30°
P
D
Conicityover 1/16 Ø
L1L2
E0
E1
Nom-inalsize
oftube
mm inch
Outsidediameter
of the tube
Num-berof
threadsper
inch
Pitch Diameter of thepitch of the bolt
at the outsideend of the
thread
The pitch ofthe bolt at theinside end of
the thread
Efficientlength of the
thread
Length of thehand packing
Increase of thediameter per
rotation
D P Eo E1 L2 L1
mm inch mm inch mm inch mm inch mm inch mm inch
1/8 10,29 0,405 27 0,94 0,03704 9,233 0,36351 9,489 0,3736 6,703 0,2639 4,102 0,1615 0,0586 0,00231
1/4 13,72 0,54 18 1,411 0,05556 12,126 0,47739 12,487 0,49163 10,205 0,4018 5,786 0,2278 0,0881 0,00347
3/8 17,14 0,675 18 1,411 0,05556 15,545 0,61201 15,929 0,62701 10,358 0,4078 6,096 0,24 0,0881 0,00347
1/2 21,34 0,84 14 1,814 0,07143 19,264 0,75843 19,772 0,77843 13,556 0,5337 8,128 0,32 0,1132 0,00446
3/4 26,67 1,05 14 1,814 0,07143 24,579 0,96768 25,117 0,98887 13,86 0,5457 8,61 0,339 0,1132 0,00446
1 33,4 1,315 11 1/2 2,209 0,08696 30,826 1,21363 31,461 1,23863 17,343 0,6828 10,16 0,4 0,1379 0,00543
1 1/4 42,16 1,66 11 1/2 2,209 0,08696 39,551 1,55713 40,218 1,58338 17,952 0,7068 10,668 0,42 0,1379 0,00543
1 1/2 48,26 1,9 11 1/2 2,209 0,08696 45,621 1,79609 46,287 1,82234 18,377 0,7235 10,668 0,42 0,1379 0,00543
2 60,32 2,375 11 1/2 2,209 0,08696 57,633 2,26902 58,325 2,29627 19,215 0,7565 11,074 0,436 0,1379 0,00543
2 1/2 73,02 2,875 8 3,175 0,125 69,076 2,71953 70,159 2,76216 28,892 1,1375 17,322 0,682 0,1983 0,00781
3 88,9 3,5 8 3,175 0,125 84,852 3,34062 86,068 3,3885 30,48 1,2 19,456 0,766 0,1983 0,00781
3 1/2 101,6 4 8 3,175 0,125 97,472 3,8375 98,776 3,88881 31,75 1,25 20,853 0,821 0,1983 0,00781
4 114,3 4,5 8 3,175 0,125 110,093 4,33438 111,433 4,38712 33,02 1,3 21,437 0,844 0,1983 0,00781
NOTE: All sizes in the table correspond to the ASME B1.20.1 and API 5 L standards, excepr for the nominal sizes 1/8” and 1/4” for which E1 and L1 are not measured on the same plane according to API 5L. However, these sizes are the same when brought on the same plane.
FORGED FITTINGS THREADS|ASME B1.20.1
TAPER PIPE THREADS, NPT
[email protected] www.aesteiron.com
General Note :The Standards for Tapered pipe thread are: National Pipe Taper [NPT] and British Standard Pipe Taper [BSPT]. The male and female Taper pipe threads wedge themselves together but they need a sealant for leak-proof connection.
The Categories of pipe thread:[a] Tapered pipe thread / Taper pipe thread[b] Straight / Parellel pipe thread.
68
NOTE:All weights in this section are based on approxemate weights for steel.Titanium weights can be calculated as 57% of the table values.
TYPE APPROXIMATE WEIGHTS IN Kg
3000 lbs SCREWED FITTINGS
SIZE INCHES
SIZE METRIC
Round Nipples
Hexagon Nipples
#Hexagon Reducing Nipples
End Caps
Unions
90° Elbows
45° Elbows
Tees
*Reducing Tees
Welding Bosses
Couplings
Reducing Couplings
Half Couplings
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
6 8 10 15 20 25 32 40 50
0,023 0,04 0,055 0,1 0,2 0,242 - 0,405 0,56
0,032 0,04 0,072 0,1 0,16 0,24 0,38 0,455 0,55
- 0,038 0,055 0,09 0,142 0,205 0,35 0,405 0,51
0,026 0,04 0,06 0,106 0,14 0,34 0,454 0,7 1,3
0,16 0,16 0,21 0,325 0,5 0,9 1,12 1,45 2,19
0,16 0,135 0,27 0,41 0,61 1,0 1,25 1,6 2,55
0,12 0,11 0,23 0,34 0,555 0,85 1,0 1,4 2,1
0,255 0,225 0,325 0,6 0,8 1,41 1,4 2,27 3,05
- 0,25 0,4 0,7 0,98 1,73 2,01 2,605 3,4
- 0,053 0,085 0,15 0,22 0,316 0,705 0,998 1,44
0,035 0,05 0,08 0,15 0,22 0,31 0,71 1,05 1,5
- 0,07 0,105 0,185 0,285 0,396 0,872 1,4 1,71
0,02 0,024 0,035 0,075 0,15 0,2 0,335 0,5 0,71
NOTE: # Weights of the smallest reduction, i.e. the heaviest * Weights of the largest reduction, i.e. the heaviest
TYPE APPROXIMATE WEIGHTS IN Kg
SCREWED FITTINGS
SIZE INCHES
SIZE METRIC
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
6 8 10 15 20 25 32 40 50
*Hexagon Bushes - 0,025 0,035 0,054 0,08 0,18 0,19 0,23 0,455
Square Head Plugs 0,009 0,016 0,029 0,057 0,095 0,172 0,255 0,4 0,58
Hexagon Head Plugs 0,029 0,029 0,057 0,085 0,142 0,227 0,51 0,624 1,021
Round Head Plugs 0,057 0,057 0,085 0,113 0,17 0,34 0,51 0,709 1,361
NOTE: * Weights of the largest reduction, i.e. the heaviest
FORGED FITTINGSASME B16.11
WEIGHT OF FITTINGS
[email protected] www.aesteiron.com 69
TYPE APPROXIMATE WEIGHTS IN Kg
3000 lbs SOCKET-WELD FITTINGS
SIZE INCHES
SIZE METRIC
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
6 8 10 15 20 25 32 40 50
Couplings 0,039 0,05 0,06 0,115 0,18 0,25 0,4 0,48 0,8
#Reducing Couplings - 0,066 0,071 0,132 0,22 0,325 0,44 0,575 1,3
Half Couplings 0,04 0,054 0,085 0,135 0,17 0,32 0,485 0,6 1,02
Tees 0,265 0,21 0,255 0,31 0,325 0,6 0,85 1,29 1,9
*Reducing Tees - 0,289 0,323 0,415 0,448 0,81 1,32 1,675 2,55
Welding Bosses - 0,072 0,085 0,135 0,205 0,3 0,41 0,56 1,225
End Caps 0,02 0,035 0,058 0,085 0,13 0,21 0,3 0,475 0,73
90° Elbows 0,155 0,13 0,13 0,225 0,29 0,5 0,75 1,1 1,7
45° Elbows 0,072 0,06 0,085 0,18 0,222 0,36 0,555 0,85 1,2
Unions 0,157 0,157 0,188 0,28 0,45 0,775 1,2 1,4 2,25
NOTE: # Weights of the smallest reduction, i.e. the heaviest * Weights of the largest reduction, i.e. the heaviest
TYPE APPROXIMATE WEIGHTS IN Kg
6000 LBS SOCKET-WELD FITTINGS
SIZE INCHES
SIZE METRIC
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
6 8 10 15 20 25 32 40 50
Couplings
#Reducing Couplings
Half Couplings
Tees
*Reducing Tees
Welding Bosses
End Caps
90° Elbows
45° Elbows
NOTE: # Weights of the smallest reduction, i.e. the heaviest * Weights of the largest reduction, i.e. the heaviest
- 0,085 0,13 0,205 0,275 0,48 0,68 1,05 1,95
- 0,1 0,148 0,272 0,355 0,5 0,75 1,275 2,2
- 0,094 0,15 0,25 0,34 0,65 0,751 1 2,1
- - - 0,675 1,2 1,58 1,8 3,005 3,6
- - - 0,805 1,359 1,85 2,3 3,68 4,15
- 0,09 0,135 0,2 0,27 0,4 0,6 1 1,78
- 0,105 0,175 0,188 0,23 0,41 0,63 0,8 1,4
- - - 0,4 0,628 1 1,4 2,35 3
- - - 0,369 0,58 0,905 1,125 2,125 2,6
FORGED FITTINGSASME B16.11
WEIGHT OF FITTINGS
[email protected] www.aesteiron.com70
TYPE APPROXIMATE WEIGHTS IN Kg
SWAGE NIPPLES - BS3799
SIZE INCHES
SIZE METRIC
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
6 8 10 15 20 25 32 40 50
Screwed/Plain 3000 lbs
Plain 6000 lbs
Screwed 6000 lbs
NOTE: # Weights of the smallest reduction, i.e. the heaviest * Weights of the largest reduction, i.e. the heaviest
0,04 0,054 0,085 0,135 0,17 0,32 0,485 0,60 0,925
0,105 0,13 0,18 0,225 0,29 0,55 0,8 1,1 1,4
0,17 0,215 0,285 0,325 0,501 0,75 0,951 1,6 2,1
TYPE APPROXIMATE WEIGHTS IN Kg
6000 LBS SOCKET-WELD FITTINGS
SIZE INCHES
SIZE METRIC
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
6 8 10 15 20 25 32 40 50
NOTE: # Weights of the smallest reduction, i.e. the heaviest * Weights of the largest reduction, i.e. the heaviest
RoundNipples - - - 0,191 0,272 0,43 - 0,716 1,008
HexagonNipples 0,045 0,06 0,08 0,12 0,195 0,3 0,48 0,493 0,61
#HexagonReducingNipples 0,04 0,055 0,07 0,085 0,138 0,275 0,39 0,3 0,504
Couplings 0,08 0,085 0,105 0,2 0,45 0,945 1 1,85 3,4
ReducingCouplings 0,088 0,105 0,126 0,245 0,509 1,35 1,455 2,222 3,955
HalfCouplings 0,06 0,065 0,08 0,115 0,225 0,454 0,525 0,95 1,6
EndCaps 0,06 0,065 0,085 0,145 0,2 0,335 0,585 0,75 1,45
90°Elbows 0,285 0,275 0,475 0,7 1,6 3,05 3,4 6 9,4
45°Elbows 0,265 0,245 0,225 0,625 0,95 1,12 2,125 2,6 4,3
Tees 0,48 0,425 0,6 0,9 1,65 2,1 3,5 4,4 8,5
*ReducingTees - 0,6 0,78 1,2 2 2,34 4,05 4,94 10,4
WeldingBosses - 0,085 0,115 0,21 0,46 0,9 1,1 1,85 3,25
FORGED FITTINGS
WEIGHT OF FITTINGS
[email protected] www.aesteiron.com 71
FITTINGS