ENGINEERED PRODUCTS

Peristaltic pumps deliver more than you expect

FMP50

Flowto 34.6 gpm (130 lpm)

Pressureto 115 psi (7.9 bar)

TemperatureProduct to 176° F (80° C)Ambient to 104° F (40° C)

ApplicationsMetering, batching, transfer and sampling

FMP50: Direct connect. Reliable. Performance.With their roller design, commercial gear drives and cartridge-style rotor bearings, FMP pumps are perfect for high-volume applications. Like all Pulsafeeder peristaltic pumps, the FMP50 is ideally suited for water and wastewater treatment, petrochemical and mining industries — including slurries, sludge, reagents, chemicals, and polymers.

PeriFlo® FMP Series

Simple operating design The simple design of a PeriFlo® pump results in a pump that is valveless and sealless (creating a gentle pumping action), has reversible rotation, high suction lift, higher solids content handing ability and easy maintenance.

Variety of MediaThanks to its gentle pumping action, a peristaltic pump can handle a variety of media where other technologies are unsuccessful, including chemicals, slurries, viscous, abrasive or shear sensitive media such as polymers.

Pump Longer The simple design means there are no valves to change and no seals to replace. The hose or tube element is the common wear part and is easy to replace. This means less down-time, less spare parts inventory and more pumping.

87.180

60

40

20

00 5 10 15 20 25 31.37

Spee

d R

PM(b

ased

on

1725

RP

M m

otor

)

Flow GPM30 PSI / 87.1 RPM60 PSI / 49.3 RPM 60 PSI / 87.1 RPM115 PSI / 27.3 RPM 115 PSI / 49.3 RPM

Note: Continuous Duty = run time greater than 2 hoursIntermittent Duty = run time less than 2 hours with a 1 hour rest period between run times

Max Pressure/RPMfor Continuous Duty CycleIntermittent Duty Cycle

Flow vs. RPM

19.0483.0

25.6650.4

.26.0

14.7373.0

1.50 - 150# RF FLANGES

3.383.0

20.0507.6

VARIES WITH MFG

16.1410.0

25.7654.0

6.6168.0

28.7730.0

2X 4.6117.0

2X 16.3415.0

2X 17.8451.0

CLEARANCE FORM12 BOLTSMeasurements: in

[mm]

PFFMP50spec_Rev0815

Spec Pulsafeeder. Get more than you expect.

ENGINEERED PRODUCTS

Pulsafeeder, Inc.2883 Brighton Henrietta Town Line Road • Rochester, NY 14623Phone: +1 (585) 292-8000 • pulsa@idexcorp.com pulsa.com

PerformanceSpecifications

Features & Benefits

Materials of Construction

Drives & Accessories

Dimensions

Max capacity 0.36 gal/rev

Max flow rate 34.6 gpm (130 lpm)

Connections 1.5" ANSI Flange, 150#

Compressor Rollers

Max hose pressure 115 psi (7.9 bar)

Top View

Side View

Front view

• Sealless and Valveless• Close coupled• Sealed bearing housing • Abrasion resistant• Dry-run capable• Self priming to 27 ft.• Reversible rotation• Easy maintenance

• Variable speed controls with industry standard I/O’s

• Tube/Hose leak detection • Pulsation dampeners • Suction accumulators• Pressure relief valves

Hose: Natural rubber, Buna, EPDMConnections: ANSI Flange, 150#

Standard: Stainless steel Optional: Halar® coated

Casing: Epoxy painted cast steelRotor: Epoxy painted steelRollers: Black oxide steelHardware: Stainless steel

PeriFlo® FMP50

FMP50 Weight (with standard motor): 62 lbs.

© Copyright 2015 Pulsafeeder. All Rights Reserved. Halar® is a registered trademark of Solvay Solexis.