fogmaster products brochure

fogmaster® Products

fogging Technologies

A N O T E C – W E S T I C K O U R N O S E I N Y O U R B U S I N E S S !

Application Equipment for: Landfill Site Remediation Hospitality Sewage treatment plants Waste Management Transport Laundries ………………..anywhere!

www.anotec.com.au Anotec Pty Ltd | 30 Chegwyn St Botany NSW 2019

Drum Mounted – Portable Odour Control Fogger

The Fogmaster drum-mounted 7421 fogger allows precise adjustment of particle size, less than 7 micron VMD, for ultra low volume application. This allows use of more concentrated fogging solutions, and speeds up treatment time -- at typical ULV application rates, the fogmaster covers 0.5 - 115 m3 per minute.)

A 10-turn precision needle valve controls liquid output and droplet size. Set the valve to a low flow rate to produce near-invisible ULV droplets. For heavier fogs and mists, Increase the flow rate. Once the valve has been set, you can use the vernier calibration to return to the same setting, or snap a lock ring to prevent accidental changes.

Chemical flow rate with the Fogmaster fogger is easily calibrated in the field to adjust for differences in liquid density, viscosity or surface tension. And since the fogmaster handles both water- and oil-based liquids, this one machine can satisfy all your fogging requirements.

The fogmaster 7421 fogger is widely used in wastewater treatment plants, paper mills, parks, warehouses, site remediation, landfill, food storage areas etc.

Fogmaster – technologically advanced fogging, with controlled flow and particle size.

The Fogmaster® drum-mounted 7421 unit features precise adjustment of particle size, as small as 7-10 micron VMD, for ultra low volume application. ULV application provides greater penetration and diffusion of fog particles, allowing more concentrated Anotec solutions to be used and shortening application times.

fogmaster® 7421

Anotec Odour Control Hire arrangement

Anotec Pty Limited 30 Chegwyn Street Botany NSW 2019

Tel: 02 9700 1222 | Fax: 02 9700 1771

www.anotec.com.au

Motor 1 Hp., 240VAC, 4.0 amp

Fogging Nozzle High-shear, vortex design nozzle

Particle Size 7-30 micron VMD, adjustable

Chemicals Water- and oil-based solutions

Liquid Flow Rate 0-300 ml/min, adjustable Nine-turn vernier control valve, memory lock

Capacity Mounts to chemical drum (not included)

Materials of Construction

Power head, drum adapter - aluminium Tubing - fuel and oil resistant vinyl Control valve - glass filled nylon, stainless stem, Viton® seal Fittings - brass Nozzle - Celcon

Dimensions H x L x Diameter: 39 x 32 x 22 cm

Shipping Weight 6 Kilograms

Warranty Period One year

technology consul t ing

MONTHLY

JOURNAL OF

INFORMATION

TECHNOLOGY TechTimes

Drum Mounted | Portable Anotec Odour Control

vel natu meus. Molior torqueo capio velit loquor aptent

ut erat feugiat pneum commodo vel obruo mara

genitus. Suscipit, vicis praesent erat feugait epulae,

validus indoles duis enim consequat genitus at lerpo

ipsum. Enim neo velit adsum odio, multo, in

commoveo quibus premo tamen erat huic. Occuro uxor

dolore, ut at praemitto opto si sudo, opes feugiat iriure

validus. Sino lenis vulputate, valetudo ille abbas cogo

saluto quod, esse illum, letatio conventio.

Letalis nibh iustum transverbero bene, erat vulputate

enim dolore modo. Molior torqueo capio velit loquor

aptent ut erat feugiat pneum commodo vel obruo mara




commoveo quibus premo tamen erat huic. Occuro

uxor dolore, ut at praemitto opto si sudo.

Suscipit, vicis praesent erat feugait epulae, validus

indoles duis enim consequat genitus at lerpo ipsum.

Enim neo velit adsum odio, multo, in commoveo

quibus premo tamen erat huic.

this issue Open Source Revolution P.1

IT Management Tips P.2

Non-Profit Solutions P.3

Trends & New Software P.4

7421 EYE ON IT Current Industry Trends

Suscipit, vicis praesent erat

feugait epulae, validus indoles

duis enim consequat genitus at.

Sed, conventio, aliquip

accumsan adipiscing augue

blandit minim abbas oppeto

commov.

Enim neo velit adsum odio,

multo, in commoveo quibus

premo tamen erat huic. Occuro

uxor dolore, ut at praemitto opto

si sudo, opes feugiat iriure

validus. Sino lenis vulputate,

valetudo ille abbas cogo saluto

quod, esse illum, letatio lorem

conventio. Letalis nibh iustum

transverbero bene, erat vulpu

tate enim esse si sudo erat.

SOFTWARE Monthly Picks

Volutpat mos at

neque

nulla lobortis

dignissim

conventio, torqueo, acsi roto

modo. Feugait in obruo quae

ingenium tristique elit vel natu

meus. Molior torqueo capio velit

loquor aptent ut erat feugiat

pneum commodo.





si sudo, opes feugiat.

Aptent nulla aliquip camur ut

consequat aptent nisl in voco

consequat. Adipsdiscing magna

jumentum velit iriure obruo. damnum

pneum. Aptent nulla aliquip camur ut

consequat lorem aptent nisl magna

jumentum velitan en iriure. Loquor,

vulputate meus indoles iaceo, ne

secundum, dolus demoveo

interddfico proprius. In consequat os

quadfse nudflla magna. Aptent nulla

aliquip camur utan sdl as consequat

aptent nisl in vocoloc consequat ispo

facto delore ergo maska forgeuit

masca pala ergo sacrum lamap

allacum dergo ipso aliquip mia sermi

proprius. In consequat os quae nulla magna. Delenit

abdo esse quia, te huic. Ratis neque ymo, venio illum

pala damnum. Aptent nulla aliquip camur ut

consequat aptent. Adipiscing magna jumentum

velit iriure obruo vel.Volutpat mos at neque nulla

lobortis dignissim conventio, torqueo, acsi roto

modo. Feugait in obruo quae ingenium tristique

elit vel natu meus. Molior torqueo capio velit loquor

aptent ut erat feugiat pneum commodo vel obruo

mara duis enim consequat genitus. Enim neo velit

adsum odio, multo lorem ipso mata irlosa.

specifications

SPECIFICATIONS: 7421

Long Reach, High-Level odour control fogging unit

The remote discharge of the Sewr-Jet TM 4180 makes it ideal for odour control in hard-to-reach or high-level odour generating locations. Its tiny fog particles, with their vast surface area for efficient gas contact, yield high removal rates at low chemical cost.

The anti-siphon design and corrosion resistant nozzle of the 4180 are particularly suited for such below-grade applications as sewer lift stations, holding tanks and high end odours (hydrocarbons etc). The nozzle may be suspended from above, attached to a pit cover, or mounted through a side wall.

Available in three hose lengths, the 4180 can be controlled manually. For non-rental units it can be controlled automatically with an optional repeat cycle timer or gas monitor.

Like all Fogmaster's drum mounted units, it's a breeze to set up. Just screw the power head into your Anotec chemical container (it fits the standard 2 inch NPT opening of 200-L drums), adjust the valve for desired particle size (anything from a dry fog to a wet mist) and aim the output.

The 4180 is well suited for maintenance, remediation and repair operations - portable, reliable and easy to care for. Just hose off the nozzle between jobs, clean the

intake filter as needed, and change motor brushes when they wear out (700 hour estimated lifetime).

Sewr-Jet 4180 ... another effective solution from fogmaster®.

Anotec Odour Control Disinfecting Sanitising

The remote discharge of the Sewr-Jet TM 4180 makes it ideal for odour control in hard-to-reach locations. Its tiny fog particles, with their vast surface area for efficient gas contact, yield high removal rates at low chemical cost.

SewR-Jet 4180


Tel: 02 9700 1222 | Fax: 02 9700 1771

www.anotec.com.au

Motor 1 Hp., 240VAC, 4.0 amp, Motor Save brush – protects commutator when worn

Fogging Nozzle

Blower

High shear, counter rotating vortex, non-clogging design

Balanced fan, 2-stage, 20,000 rpm (no load)


Chemicals Water- and oil-based solutions (Liquid viscosity and density affect particle size distribution)

Liquid Flow Rate 0-300 ml/min, adjustable, 9 turn vernier valve with memory lock


Power head housing and drum adapter - aluminium Tubing – fuel and oil resistant vinyl Tank Gasket – Buna N (nitrile) Fittings– brass Hose - Vinyl Nozzle – Celcon acetyl copolymer Hose clamps and mounting hardware – stainless steel

Dimensions H x L x Diameter: 39 x 32 x 22 cm, plus hose (10 metres)

Shipping Weight Power head – 6 Kilograms

Hose/nozzle assembly – approx 7 kilograms

Warranty Period One year warranty


MONTHLY

JOURNAL OF

INFORMATION


Drum Mounted |SewR-Jet Portable Fogging Unit

































commov.













Volutpat mos at

neque

nulla lobortis

dignissim






pneum commodo.

































specifications


Ultra Low Volume Fogging Unit

The Fogmaster Micro-Jet ULV® 7401 fogger allows precise adjustment of particle size, less than 7 micron VMD, for ultra low volume application. This allows use of more concentrated fogging solutions, and speeds up treatment time -- at typical ULV application rates, the Micro-Jet covers 2-4,000 cubic feet per minute.)

A 10-turn precision needle valve controls liquid output and droplet size. Set the valve to a low flow rate to produce near-invisible ULV droplets. For heavier fogs and mists, Increase the flow rate. Once the valve has been set, you can use the vernier calibration to return to the same setting, or snap a lock ring to prevent accidental changes.

Chemical flow rate with the Fogmaster Micro-Jet ULV fogger is easily calibrated in the field to adjust for

differences in liquid density, viscosity or surface tension. And since the Micro-Jet handles both water- and oil-based liquids, this one machine can satisfy all your fogging requirements.

The Micro-Jet ULV fogger is widely used in schools, restaurants, zoos, barns, hotels, and similar locations

requiring professional application. Light-weight, and supported by our five-year limited warranty, the Fogmaster Micro-Jet ULV is an outstanding choice.

The Fogmaster® Micro-Jet 7401 unit features precise adjustment of particle size, as small as 7-10 micron VMD, for ultra low volume application. The Micro-jet covers 2-4,000 sq. ft. per minute. In addition, it can be adjusted to deliver larger droplets for space spraying and wet fogging. The Fogmaster® handles both wet and oil-based liquids.

Micro-Jet 7401



Tel: 02 9700 1222 | Fax: 02 9700 1771

www.anotec.com.au

Motor 1 Hp., 240V, 3.5 amp

Fogging Nozzle High-shear, vortex design nozzle

Particle Size 7-30 micron VMD, adjustable (ultra fine, dry fog to heavy, wet fog)

Chemicals Water- and oil-based solutions

Liquid Flow Rate 0-300 ml/min, adjustable Nine-turn vernier control valve, valve lock feature

Capacity 4 Litres


Power head, housing and tank - aluminium Tubing - fuel and oil resistant vinyl Control valve - glass filled nylon, stainless steel, Viton® seal Nozzle – Celcon acetyl copolymer



Warranty Period Two years


MONTHLY

JOURNAL OF

INFORMATION


Hand Held | Portable Anotec Odour Control Unit

































commov.













Volutpat mos at

neque

nulla lobortis

dignissim






pneum commodo.

































specifications


Sanitising and Disinfecting Fogging Unit

The Vectra-Jet 7505 unit pulls the Anotec odour control chemical from a 4 litre reservoir and discharges it as a fog of fine droplets. The powerful discharge carries the fog plume a distance of 7m- 15m and creates eddies that spread laterally. Droplet size is adjustable down to very small droplets that tend to float until they hit something. Small droplets can penetrate cracks and crevices and reach undersides furniture and equipment. However, if a room is crowded, you may have to fog from several angles to achieve full coverage.

The Vectra-Jet 7505 can be carried by hand, be placed on a stool or on the floor (turntable optional extra).

The Vectra-Jet 7505 uses corrosion resistant

materials for wetted components: stainless steel, Viton® tubing and Celcon® polymer components.

A high efficiency filter protects the air-cooled motor trapping suspended chemical

droplets in the intake air. More uses than ever ... another effective solution from

Fogmaster.


Designed for sanitising and disinfecting, the Vectra-Jet 7505 fogger can apply a thin or thick layer of chemical to control undesirable micro-organisms in clean rooms, packaging lines, storage area, emergency vehicles, shipping containers and the like.

Vectra-Jet 7505


Tel: 02 9700 1222 | Fax: 02 9700 1771

www.anotec.com.au



Chemicals Water- and oil-based solutions (Liquid viscosity and density affect particle size distribution) NOT compatible with flammable chemicals as arcing by open frame motor may cause ignition.

Liquid Flow Rate

Fog Distance

0-300 ml/min, adjustable

Visible fog up to 13 metres. Fog plum may appear shorter when applying water-based solutions because fog droplets tend to evaporate.

Capacity

Blower

4 Litres

Two stage balanced fan, 20,000 rpm (no load)


Power head housing - aluminium Tank – stainless steel Tubing – Viton polymer Tank Gasket – Buna N (nitrile) Fittings and Control valve – stainless steel Nozzle – Celcon acetyl copolymer


Shipping Weight 5.9 Kilograms

Warranty Period One year limited warranty


MONTHLY

JOURNAL OF

INFORMATION


Hand Held | Vectra Fogging Unit

































commov.













Volutpat mos at

neque

nulla lobortis

dignissim






pneum commodo.

































specifications


Durable General Purpose Fogging Unit

The time-proven Fogmaster Tri-Jet ®6208 fogger serves the needs of a wide range of uses for both indoor and outdoor application. Food plants, hotels, barns, parks and hospitals are just a few examples of sites which depend on the Fogmaster Tri-Jet for effective treatment.

This pioneering unit, now in its fourth decade of service, provides the standard of reliability against which other foggers are measured. It's in daily use for such diverse applications as controlling odours, disinfecting and sanitizing, carpet mildew control, flood and fire damage restoration, controlling mosquitoes, flies and other

insects, dispensing water for humidification and dust control and a host of innovative applications. The portable 6208 is a "cold fogger" - it handles both water- and oil-based solutions - and has a one-turn control knob to adjust particle size and

degree of misting. The dispensing rate is easy to calibrate in the field to compensate for differences

in liquid density or viscosity. The Tri-Jet fogging head can be adjusted at up or down angles as required. Made of durable aluminium, it's lightweight, but tough enough to justify its five-year limited warranty. More uses than ever ... another effective solution from Fogmaster.

Anotec Odour Control Pest Control Disinfecting Sanitising

Designed for pest and odour control. Adjustable output is a key feature of this rugged, portable cold fogger. A control knob provides the desired degree of misting of both water- and oil-based solutions. The accurate and constant dispensing rate is easy to calibrate in the field – adjustable to 0-300 ml/min with control valve. It features three counter rotating vortex nozzles and is designed for long life. 4 Litre capacity

Tri-Jet 6208


Tel: 02 9700 1222 | Fax: 02 9700 1771

www.anotec.com.au


Fogging Nozzle Three counter rotating vortex nozzles


Chemicals Water- and oil-based solutions (Liquid viscosity and density affect particle size distribution)

Liquid Flow Rate 0-300 ml/min, adjustable

Capacity 4 Litres


Power head, housing and tank - aluminium Tubing - fuel and oil resistant vinyl Fittings and Control valve – brass

Nozzle – Celcon



Warranty Period Two years


MONTHLY

JOURNAL OF

INFORMATION


Hand Held | Tri-Jet Fogging Unit

































commov.













Volutpat mos at

neque

nulla lobortis

dignissim






pneum commodo.

































specifications


fogmaster products brochure

Documents