TLPRGBRF INST

For ConTech Lighting RGB Controller: TLPRGBRF

www.contechlighting.com1-847-559-5500 This document can be recycled.

• The TLPRGBRF multi-function LED controller is a universal dimming controller, which adopted advanced PWM (Pulse Width Modulation) digital dimming technology, PC engineering plastic, soft button control and exquisite appearance; functional change and brightness adjustment. It can be controlled by the buttons on the receiver and also by RF remote control, which is widely used in the resistor current limiting single color LED products. Automatically adapt to DC 12V - 24V voltage input.NOTE: TLPRGBRF can be connected to the constant current power repeater to control the

hi-power LED lights.

TECHNICAL SPECS

FEATURES• Automatically adapt to LED lights with voltage from DC5-24V• On/Off button function available• 3-Channel single color output control, 6A per channel, total for 18A• Built-in 5 change modes and 25%, 50%, 75%, 100% 4 shortcuts of brightness options

available• Speed and brightness adjustable• DIY modes• Long distance RF remote control

OPERATING INSTRUCTIONS• There are eight (8) functions keys on the receiver: ON/OFF, PAUSE, MODE, DIM,

SPEED/BRT+, SPEED/BRT-, M1, M2• The learning of the remote control:

Learning ID: Press ON/OFF button on the receiver for 3 seconds, it is on the state of addressing when the RF green indicator light is on. Then press any button on the remote control, the indicator light turns off, the controlling between the remote control and the receiver is activated.

Cancelling ID: Press the ON/OFF key over 5 seconds. The RF green indicator light is on and then off. Press any button on the remote control, the RF grrn indicator light start flickering, it means the controlling between the remote control and receiver is cancelled.

1

2

HH

HH

HH1-

1/2"

1-3/

16"

5/8"

1/2"

3/8"3/8"

8"

3/4"

8-1/4"

(Common Anode)PInput PowerMax Current Load Max Output PowerDimming RangeRemote Control DistanceWorking TemperatureDimensionPackage SizeWeight (G.W)

ower Supply Chosen DC CV SMPSDC12V～DC24V

6A/CH×3CH 18A Max 216W/432W(12V/24V)

100m-30 ~55ºC ºCL211×W40×H30(mm)L313×W50×H32(mm)230g

5~100%

TLPRGBRF

2" 1/2"

4-1/4"

Button DescriptionReceiver sign Remotecontrol sign

PAUSE

DIM

SPEED/BRT+SPEED/BRT-

DIY

ON/OFF

MODE

Turn on/off the receiver.(Turn on/off the LED light)

Press the key to select 5 modes: color fade in and fade out, color flicker, color strobe, color skipping and color smooth.

Under the MODE status, press these two keys to quicken or slower speed. Under the DIM state, Press these two keys to increase or decrease the brightness.

Easy brightness selecting function for 25%、50%、75%、100% brightness.

Under the MODE status, Press the key to rest at current color, it will continue to change if press again. Press in 3 seconds, the buzzer can be on or off.

Press the key over 3 seconds, the receiver will save the present function mode automatically. It is convenient for the user to save the changing mode or static brightness state that he like. The receiver has M1, M2 2 keys and the remote control has M1 ~ M6 6 keys.

Keep pressing to adjust the brightness continuously.

Continued on page 2

INSTALLATION INSTRUCTIONS

TLPRGBRF INSTwww.contechlighting.com1-847-559-5500 This document can be recycled.

For ConTech Lighting RGB Controller: TLPRGBRF

3

4

WIRING DIAGRAMS• Connected to LED module (Figure 3)• Power repeater can be added to expand power when the power is not enough.

Constant current power repeater also can be added if control the high power LED at the same time. (Figure 4)

NOTES• The product shall be installed and serviced by a qualified person• This product is non-waterproof. Please avoid the sun and rain. When installed

outdoors, please ensure it is mounted in a water proof enclosure.• Good heat dissipation will rpolong the working life of the controller. Please

ensure good ventilation.• Please check if the output voltage of and LED power supplies used comply with

the working voltage of this product.• Please ensure that adequate sized cable is used from the controller to the LED

lights to carry the current. Please also ensure that the cable is secured tightly in the connector.

• Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.

• If a fault occurs, please return the product to your supplier. Do anot attempt to fix this product by yourself.

IMPORTANT SAFETY INSTRUCTIONS:• Read all the instructions before installation. Save instructions for later use.• Turn off power at fuse or circuit breaker box before installation or before doing any

maintenance work.• Product must be grounded to avoid potential electric shock and any other potential hazards.• Product must be mounted in locations and at heights and in a manner consistent with its

intended use, and in compliance with National Electrical Code and local codes. Use of accessory equipment is not recommended.

• Installing contrary to instructions may cause unsafe conditions.• Do not block light from the trim aperture, in whole or in part, as this may cause unsafe

conditions.• Warning: Risk of fire. Most dwellings built before 1985 have supply wire rated at 60°C.

Consult a qualified electrician before installation.• To avoid hazards to children, account for all parts and properly dispose of all packing

materials.• Call the Technical Support department at ConTech Lighting with any installation questions:

847.559.5500.

POWERSUPPLY

LED

mod

ule

LED

mod

ule

LED

mod

ule

LED

mod

ule

LED

mod

ule

LED

mod

ule

LED

mod

ule

LED

mod

ule

LED

mod

ule

LED

mod

ule

LED

mod

ule

LED

mod

ule

POWERSUPPLY

In-p

hase

Cab

le

POW

ERSU

PPLY

LED

Mod

ule

LED

Mod

ule

HH

HH

HH

HH

HH

DC48VAC90-250V

POW

ERO

UTP

UT

INPUTSIG

NAL

MODEL: LT-3090-350LED CONTROLLER

POWER REPEATER

350mA Constant Current Output

Example

Drives 1~12pcs 1W Hi-power LEDx3CHPOWER SUPPLY

Constant Current Power Repeater

Constant Voltage Power Repeater

INSTALLATION INSTRUCTIONS

All specifications subject to change without notice. For ConTech’s limited product warranty, go to www.contechlighting.com. For a printed copy of the warranty, call 1-847-559-5500.