For  Sale  

 Nimble  Wanderer  

Comfortable  and  Efficient!  Highly  maneuverable  on  land  or  water!  Economical  with  maximum  fuel  efficiency  

Excellent  for  Grand  Loop  Trailerable  to  distant  ports  Full  Galley  with  new  stove  Head  with  separate  shower  

Includes  dinghy,  engine,  canvas,  trailer  and  more!    

FUN!  for  day,  weekend  and  longer  adventures!    $49,900  

865-­‐379-­‐8723    Ext  0  

Full  Specs  on  Back  Specs Builder: Nimble Designer: Ted Brewer Hull Shape: Displacement Dimensions LOA: 32 ft 0 in Beam: 8 ft 6 in Length on Deck: 32 ft 5 in Maximum Draft: 2 ft 10 in Displacement: 8800 lbs Headroom: 6 ft 6 in Engines Engine 1: Engine Brand: Yanmar Year Built: 1996 Engine Model: 4JH3-TE Engine Type: Inboard Engine/Fuel Type: Diesel Engine Hours: 750 Tanks Fresh Water Tanks: (70 Gallons) Fuel Tanks: (70 Gallons) Holding Tanks: (20 Gallons) Manufacturer Provided Description The Wanderer Trawler is very tough and light for a 30-foot boat. Construction methods and materials used in her manufacture were chosen to afford the owner the quality, security, and comfort of a much more expensive boat without the cost normally associated with that level of value-added features. The Wanderer Trawler was designed with the mature boat owner in mind - that rugged individualist who has reached the point in his or her life where traditional aesthetics, quality craftsmanship, unique form, and simplicity are more important than the go-fast, high-maintenance, and smaller accommodations of other boats. The years invested in defining and refining the design of the Wanderer Trawler are manifest in the efficient, practical, and commodious interior. The inside steering station is located on the starboard side close to amidships. There is a removable helmsman chair if standing at the helm is more comfortable. The galley is a standup L-shape and benefits from the ventilation and light of an overhead hatch. Hot and cool water, a two-burner stove, and 12-volt DC - 110-volt AC refrigeration complete the gourmet workstation. The large dinette to port converts easily into a comfortable double, but the piece-de-resistance is the

owner's cabin queen-size berth forward. The head is large and includes a separate shower stall. Location of the head and galley afford the owner's cabin optimum privacy. The Trawler has a large protected hatch above the main cabin to facilitate installation of an air conditioner. Other ventilation and light is derived from three hatches, four rounded deadweights, two opening ports, and two large sliding windows in the main salon. There are four large fixed windows and a companionway with doors as well. The mechanical, electrical, and plumbing systems are simple and uncluttered. Access is easy and well-labeled. Accommodations Besides the cabin table which converts into a comfortable double, the "Owner's cabin" forward is a queen size berth. The head is large, and situated properly fore-and-aft, with a separate stall shower. Location of the head and galley afford the owner's cabin optimum privacy. The head is equipped with sink, toilet, shower, and adequate counter space and ventilation. Galley The galley is a stand-up "L" shape, and benefits from an overhead hatch, affording ventilation and light. Hot and cool pressured water, a two-burner Wallas diesel cooking stove, and 12Vdc/110Vac Nordcold refrigerator with freezer complete the work station. Microwave Oven. Storage and drawers are plenty. • Wallas diesel 2 burner stove and forced air heater directly

plumbed into fuel tank. • Hot and Cold pressure water • Large Stainless steel sink • Norcold AC/DC refrigerator Navigation, Electronics and Electrical The inside steering station is located on the starboard side close to amidship with outside cockpit steering. • Hydraulic Steering • Gramin GPS with WiFi repeater for use with iPad Navigation • Fishfinder • Compass • Apleco VHF with external whip antenna • Engine staring battery • Battery charger/Inverter 40A – 1800 Watts • 12v and 110v Electrical panel

• 500 Watt electric bilge heater • 30 Amp shore power with 50 ft cord

• 250 Amp/Hr deep cycle golf cart battery house bank • 2 electric bilge pumps

Deck and Hull As with all Nimble boats, use of vacuum-bagged foam core, laminated with fiberglass, provides a high-strength, very tough hull. Coda was designed with a narrow beam so that she could be easily driven by a small fuel "sipping" diesel engine. The beam measurements combined with the draft, allow ease of trailering without special permits. A long, straight keel, and modern bow entry, rapidly gaining her maximum beam which is carried well aft has a duel benefit: excellent sea keeping and maximized room. The deck and hull are sealed and bolted together with stainless hardware, then the bolts and nuts are sealed again for assurance against leaks. The rub rail and six stainless steel cleats, all with proper back-up plates.

• Rear steering station in cockpit • Transom door • Swim step • Fenders and Dock lines • 2 anchors (delta and danforth) with rode • Full Enclosure in Aft Cockpit with isenglass windows and screens • Spare prop • PSS Maintenance free shaft seal

Other

• Custom trailer - New tires and hydraulics 2013 • Ruder post seal recondition 2013 • New bottom paint 2013 • New Morris engine controls for both steering stations 2013 • Diesel stove and forced air header installed 2013 • WiFi NMEA repeater for iPad navigation 2013 • Par electric toilet 2013 • 10’ Trinka fiberglass dingy 2013 • 2.5 Hp Suzuki out board engine 2013 • Fenders • Docking lines • Cockpit cushions • Nav station • Hot and cold pressurized water • Totally dry bilge • Teak and Holly cabin sole with teak trimming on the exterior • Weaver dingy davits • Less than 1 gal per hour cruising at 7 knots • Can be hauled with most marine forklifts • House batteries new 2014