franssons rambo txm english
DESCRIPTION
ÂTRANSCRIPT
Waste & Biomass
Originally established in 1945, we have over six decades and three generations of experience. During these years, we have been noted for our flexibility and innovative spirit.
Long Experience
Franssons offers a range of hi-end equipment with the highest quality finishes to the smallest detail and manu-factured with the best components and materials avail-able on the market.
Premium Quality
Our design philosophy is that of continuous improvement. In the way of innovation we refine every detail that re-quires not only experience, but also the latest technology applied to machinery manufacture.
Availability is profitability- Minimum, fast and easy maintenance.- Spare parts in Stock.- Components available internationally.
Technical Availability
Our machinery is based on the material to be processed: Following an analysis of the customer’s materials, we de-termine which would be the most appropriate settings to achieve maximum performance and profitability.
How We Work
Franssons Q-control is a quality control process, but not only do we analyse finished products, we also analyse ev-ery detail, every component until finding the most suitable.
Meticulous Process
In our work we take design and satisfaction to the same point. Never compromising durability for performance or vice versa.
Guaranty
Innovative Technology and the way we see Performance
4
Innovation R & D + i
www.franssons.com
“ Wherever we are, we have the same goal: Being number one in the market, offering the best customer experience, offering high quality machinery and a cost effective structure.
“
5 www.franssons.com
RAMBO HAMMERCUTTERSHow do they work?
6
The material is loaded onto the vibrating table which distributes it in a uniform and efficient feeding.
Feeding rollers flatten and push the material into the shredder, where the rotor shreds the material, con-sisting of swinging hammers in a closed labyrinthine system.
Main advantages:• For high capacity requirements• Resistant to contaminants• Sturdy machine• Equipped with knock sensor• Technical availability from 96% to 98%
Shreds materials:Industrial waste • Urban Waste • Biomass • Bark • Waste wood
Granularity achieved:40 - 100 mm.
Capacity:80 - 500 m³/h
RAMBO shredders are Hammercutter ™ rotatingcutting hammers.
More cutting surfaceMore resistant
Shear type cuttingResistant to contaminants
High efficiencyHydraulic TensionerHydraulic Brake
X-Cross RotorTM HammerCutter HammersTM F-drive Transmission
Vibrating table Distributes the material in a continuous flow
www.franssons.com
7
Regulates feeding andcompresses the material
Fewer jointsMore resistance
Pre-setting keys to suit different types of material
Absolut Feeders Stark Kropp Manufacture QuickFinder
Main Engine(Not in picture)200 kW to 1000 kW
Feeding rolls They crush and push thematerial towards shredding
Vibration sensor Alerts and stops themachine in case of rejection
Knock SensorAlerts and stops the machine in case of rejection
Hammercutter Rotor™ Shear cutting swinging hammers
Disc brakeReduces braking time by 80%
Exit sieveReplaceable by 40 to 200 mm
Hydraulic service openingTotal access to the interior
www.franssons.com
RAMBOIN DETAIL
8
It is ideal solution for harsh and demanding environ-ments, where maximum availability and high capacity is required.
F-drive transmission and engineEngine with V-belt transmission. Disc brake and hy-draulic belt tension.
X-Cross Rotor ™It is a piece of high resistance and in turn of maximum balance. Equipped with long and short Hammers, forming a labyrinthine system to process the mate-rials.
HammerCutter™ Hammers Its cutting system against anvils provides high effi-ciency, its geometry allowing them to process fibrous materials such as plastics and textiles. Hammers can be recharged by welding, decreasing spare parts costs.
Sieves Hydraulic opening system, allowing access to sieving sections, which allows variation of the exiting gran-ularity.
The rambo is a rotating shredder with cutting swinging hammers (HammerCutter™)
“ If the 8-ton rotor does not stop with an auxiliary brake, the rotor continues to rotate up to 30 min, after cutting the electric power supply.
“
www.franssons.com
9 www.franssons.com
QUALITY CONTROL100% MADE IN SWEDEN
How is Franssons equipment manufactured?A good design is not enough to turn a machine into a Franssons. Components are equally important and we only accept the highest quality in the market.
• We seek the highest quality components in the market and we conduct thorough checks thereon.
• We analyse customer needs and evaluate possible specific manufacturing settings.
• We select pieces of steel, 100% SSAB Oxelösund.
• We cut, mill and weld all the mill parts in-house.
Once completed, they are submitted to controls of:
Manufacture Operation Power Consumption Processing Tests
• We carry out strict quality controls on all our machines.
• The Q-control sticker is the proof that thisquality control has been conducted.
• Quality control 100% guaranteed.
10 www.franssons.com
“ Manufacturing a machine such as Rambo is only possible by combining the longstanding experience and an excellent manufacturing department.
“
11 www.franssons.com
WASTE RECOVERY
12
The combination of a Franssons FRX shredder anda TXM-Rambo is the solution for highly demanding environments.
• Combination of shredders and a system forseparating rejections• Reliable and economical shredding system.• Separation of ferrous materials by magnet.• Separation of non-ferrous materials by Eddy Current / Foucault.• High resistance to contaminants.• Large output capacity.
Entrance
www.franssons.com
13
Destroyer Shredder
Non-Ferrous separator
Rambo HammercutterMagnet, Fe separation
www.franssons.com
HARD as MADE IN HELL8 kg Hammers, 8,000kg Rotor + 850 rpm
14
RESISTANCE TO CONTAMINANTSThe swinging hammer system ensures that when a contaminant is introduced into the shredding system, it does not cause damages, because these are re-tracted into the rotor. In turn, the labyrinthine system prevents them from entering the sieve.
The equipment as a whole has been developed to work with abrasive materials and a high level of con-taminants.
• Rotor speed: 40 m/s• Hammer speed: 49 m/s• Inertia: 22,000 N with blow strength of 8 kg• Hammer strength: Like dropping 8 kg from aheight of 60 meters.
www.franssons.com
GENERAL SPECIFICATIONSTXM-102 Rambo
Entry 350 x 1070 mmWeight 12.000 kg
Main Engine 160 - 250 kW
Rotor length 1.000 mmRotor diameter 1.100 mmHammers 42 units.Sieve 40 - 150 mm
F-drive Transmission (Optional)
TXS-202 Superrambo
Entry 550 x 2250 mm.Weight 27.000 kg
Main Engine 500 - 730 kW
Rotor length 2.000 mmRotor diameter 1.600 mmHammers 117 units.Sieve 40 - 150 mm
F-drive transmission
TXM-152 Rambo
Entry 350 x 1570 mmWeight 17.000 kg
Main Engine 200 - 315 kW
Rotor length 1.500 mmRotor diameter 1.100 mmHammers 58 units.Sieve 40 - 150 mm
F-drive Transmission (Optional)
TXS-252 Superrambo
Entry 550 x 2750 mm.Weight 34.000 kg
Main Engine 730 - 1000 kW
Rotor length 2.500 mmRotor diameter 1.600 mmHammers 147 units.Sieve 40 - 150 mm
F-drive transmission
TXM-202 Rambo
Entry 350 x 2070 mmWeight 21.000 kg
Main Engine 315 - 500 kW
Rotor length 2.000 mmRotor diameter 1.100 mmHammers 78 units.Sieve 40 - 150 mm
F-drive Transmission (Optional)
15 www.franssons.com
AFTER SALES SERVICE NEAR YOUTECHNICAL SERVICEofficial and exclusive technical service.
SPARE PARTSStock of spare parts guarantee maximum availability.
PROTECTION PLANSWe offer different maintenance plans:Basic, Professional and Total.
Franssons Máquinas de Reciclaje, S.L.Calle Platino 4, Pol. Ind. Sur
Colmenar Viejo (Madrid), ESPAÑATel.: +34 918 469 000
Franssons Recycling Machines ABTimmervägen 8
Sundsvall, SUECIATel.: +46 60 56 78 60
www.franssons.com
TURNKEYALL YOU NEEDWe offer small and large scale turnkey solutions. Contact us to study your project and needs.
Franssons Spain
Stack of Spare Parts
After Sales Service Business Office
Testing Centre