Doc. No. 3BDD015139 en B Page 1 of 12

Freelance Quickstart FAQs, Tips & Tricks

1. Security Lock - Installation ............................................................................................. 2 2. DigiVis Autostart .............................................................................................................. 2 3. Virus Scanner Settings .................................................................................................... 4 4. Password required for DigiVis ........................................................................................ 5 5. Demo Mode expired ......................................................................................................... 6 6. Installation of Security Lock - asking for password ..................................................... 6 7. DigiVis is a full screen application on top of any other program. In Demo Applications this is pretty nasty, while presenting. How can this be switched off? .......... 6 8. I have a screen resolution less than 1280 x 1024. DigiVis is displayed in classic mode. How can I switch to the new mode? ........................................................................... 6 9. Where do I find the Release Notes fr Freelance? ........................................................ 6 10. Where do I find Updates for the Freelance Quickstart Tutorial and Demo DVD? ....... 7 11. I have an additional question, which is not answered in this document ..................... 7 12. How can I updgrade from a project created with a previous Freelance version? ....... 7 13. In Control Builder I get the error message CFdmFDT Container get Device failed what shall I do? .................................................................................................................... 7 14. How to start the Emulator ............................................................................................... 9 15. Emulator Service running message during installation ........................................... 10 16. Where to find Freelance Training ................................................................................. 10 17. I have a problem with the configuration of a function block in the tutorial. Where can I find some help? .................................................................................................................. 11 18. Index ............................................................................................................................... 12

Doc. No. 3BDD015139 en B Page 2 of 12

1. Security Lock - Installation During Installation do not select Security Lock.

2. DigiVis Autostart During installation please use the default Demo Mode.

Doc. No. 3BDD015139 en B Page 3 of 12

After installation please use default Demo Mode

Thanks to the above settings DigiVis will not start automatically.

Automatic startup of DigiVis requires advanced User/Password security settings, which is not recommended for Quickstart users.

Doc. No. 3BDD015139 en B Page 4 of 12

3. Virus Scanner Settings Some virus scanners may cause problems when using the Freelance software. To prevent this, the C:\Program Files\ABB Industrial IT\Freelance directory should be excluded from scanning.

Here is one example of how to exclude from scanning for McAfee virus scanner:

Doc. No. 3BDD015139 en B Page 5 of 12

4. Password required for DigiVis I have installed Freelance to my PC. Now, when I boot up my PC, it comes up with Freelance and requires a password. What shall I do?

There are more solutions:

Just overwrite the Freelancer user name with your old user name and your password.

If you haven't had a user name before, type in Administrator as user name and leave the password empty (or administrator as user name and empty password)

Recommendation, just deactivate DigiVis Autostart:

Start Programs ABB Industrial IT Freelance V9.1 Configure .

Doc. No. 3BDD015139 en B Page 6 of 12

5. Demo Mode expired The demo mode of my Freelance software has expired. How can I extend the validity of my demo license?

If you need the demo license for some more time, just uninstall Freelance and then install Freelance again and it will run for 100 more days.

For commercial use you are requested to obtain the necessary licenses from ABB. You will then receive the manuals as well as a hardkey along with the corresponding authorization file.

6. Installation of Security Lock - asking for password I have installed the option Security Lock by accident now I am asked for a password. What shall I do?

In this case you need to uninstall Freelance and then re-install without the Security Lock option.

How to install without Security Lock is described in Section 1 - Security Lock - Installation

7. DigiVis is a full screen application on top of any other program. In Demo Applications this is pretty nasty, while presenting. How can this be switched off?

If Control Builder F and DigiVis are used as Combi Station on one PC, messages or other programs are hard to access. There is a possibility to switch off this feature using the registry. If you would like to do that, please contact us (E-Mail: marketing.control-products@de.abb.com)

8. I have a screen resolution less than 1280 x 1024. DigiVis is displayed in classic mode. How can I switch to the new mode?

If you have a screen resolution of less than 1280x1024, DigiVis will automatically switch to the old Layout. Sometimes your video projector would not support high resolution, but you want to show the nice new Graphics. There is a possibility to switch off this feature using the registry. If you would like to do that, please contact us (E-Mail: marketing.control-products@de.abb.com)

9. Where do I find the Release Notes fr Freelance? You find the Release Notes on the Quickstart Tutorial und Demo DVD.:

Demo/Setup 9.2/ ReleaseNotes_Freelance_Version_9.2_US.pdf

Doc. No. 3BDD015139 en B Page 7 of 12

10. Where do I find Updates for the Freelance Quickstart Tutorial and Demo DVD? You find these on the Internet: (www.abb.com/controlsystems under Freelance).

If necessary, we provide updates for certain versions of the Tutorial DVD.

Click here.

11. I have an additional question, which is not answered in this document If you have any additional questions, please contact us:

E-Mail: mailto:marketing.control-products@de.abb.com

12. How can I updgrade from a project created with a previous Freelance version? If you would like to upgrade your project, which is created with version 9.1, for example, you have to export the project with version 9.1 as .CSV file. This file can then be imported into the new version.

The project files with the file extension .PRO must match the Freelance version. For example, project files created with version 9.1 cannot be read by newer version. But you can always use the .csv file.

13. In Control Builder I get the error message CFdmFDT Container get Device failed what shall I do?

In this case you have to re-install Freelance, this time with the options DTM for S800 and DTM for S900. You can access the dialog box displayed below, when you select the Custom installation option. But normally, these two options are automatically installed and the error message should not occur.

Doc. No. 3BDD015139 en B Page 8 of 12

Doc. No. 3BDD015139 en B Page 9 of 12

14. How to start the Emulator Open the Internet Explorer and enter the Emulators address (http://127.0.0.1:8888) in the address bar Set the Station ID to 1 and then click Start Controller to run the controller emulator. If you use proxy or web browser limitation software you might not be able to open this page.

Tip: save this page as Favorites.

Doc. No. 3BDD015139 en B Page 10 of 12

15. Emulator Service running message during installation If you have an existing Freelance installation and want to install the OPC Server, the Freelance Controller Emulator Service must be stopped first. Press OK like advised in the box:

To terminate the Emulator Service manually proceed as follows: Click Start Control Panel Administrative Tools Services:

Select the Freelance Controller Emulator Service, click the right mouse button and click stop to stop the service.

16. Where to find Freelance Training See the Freelance Web page:

http://www.abb.com/product/us/9AAC115759.aspx

There you will find a reference to ABB University.

Doc. No. 3BDD015139 en B Page 11 of 12

17. I have a problem with the configuration of a function block in the tutorial. Where can I find some help?

On the DVD in the folder Quickstart\Projects\EN\Export you find all function blocks, which do not belong to the sequential function chart. You find complete solutions in the folder Quickstart\Projects\EN\PRO.

Doc. No. 3BDD015139 en B Page 12 of 12

18. Index

.CSV File ...................................................................................................................................... 7

.PRO File ...................................................................................................................................... 7 ABB University ............................................................................................................................ 10 Additional question ........................................................................................................................ 7 Demo Mode .................................................................................................................................. 3 Demo Mode expired ...................................................................................................................... 6 DigiVis as full screen application ................................................................................................... 6 DigiVis Autostart

deactivate ................................................................................................................................. 5 Installation ................................................................................................................................ 2

Emulator ....................................................................................................................................... 9 Emulator Service......................................................................................................................... 10 Error message "CFdmFDT Container" .......................................................................................... 8 Function block ............................................................................................................................. 11 Kontakt-Adresse ........................................................................................................................... 7 OPC Server Setup

Error Message ........................................................................................................................ 10 Password required

DigiVis ...................................................................................................................................... 5 Security Lock ............................................................................................................................ 6

Project upgrade ............................................................................................................................ 7 Release Notes

where to find? ........................................................................................................................... 7 Screen resolution less than 1280 x 1024 ...................................................................................... 6 Security Lock

asking for password ................................................................................................................. 6 Installation ............................................................................................................................ 2, 6

Training ....................................................................................................................................... 10 Trend Server Setup

Error Message ........................................................................................................................ 10 Updates

for Freelance Tutorial und Demo .............................................................................................. 7 Virus Scanner ............................................................................................................................... 4

1. Security Lock XE "Security Lock:Installation" - Installation2. DigiVis Autostart XE "DigiVis Autostart:Installation" 3. Virus Scanner XE "Virus Scanner" Settings4. Password required for DigiVis XE "Password required:DigiVis" 5. Demo Mode expired XE "Demo Mode expired" 6. Installation of Security Lock XE "Security Lock:asking for password" - asking for password XE "Password required:Security Lock" 7. DigiVis is a full screen application XE "DigiVis as full screen application" on top of any other program. In Demo Applications this is pretty nasty, while presenting. How can this be switched off? 8. I have a screen resolution less than 1280 x 1024 XE "Screen resolution less than 1280 x 1024" . DigiVis is displayed in classic mode. How can I switch to the new mode? 9. Where do I find the Release Notes XE "Release Notes: where to find?" fr Freelance? 10. Where do I find Updates XE "Updates:for Freelance Tutorial und Demo" for the Freelance Quickstart Tutorial and Demo DVD?11. I have an additional question XE "Additional question" , which is not answered in this document 12. How can I updgrade from a project created with a previous Freelance version? XE "Project upgrade" 13. In Control Builder I get the error message CFdmFDT Container XE "Error message \"CFdmFDT Container\"" get Device failed what shall I do?14. How to start the Emulator XE "Emulator" 15. Emulator Service XE "Emulator Service" running message during installation16. Where to find Freelance Training XE "Training" 17. I have a problem with the configuration of a function block XE "Function block" in the tutorial. Where can I find some help? 18. Index