green project assessment form - alaska dec · 2019-02-05 · adwf green project assessment form vs....
TRANSCRIPT
ADWF Green Project Assessment Form vs. 4/11 Page 1 of 3
As applicable under the EPA annual capitalization grants provided to the Alaska Clean Water Fund (ACWF)
and Alaska Drinking Water Fund (ADWF) loan programs, a portion of funds appropriated shall be for projects
to address green infrastructure, water or energy efficiency improvements or other environmentally innovative
activities.” To meet this condition under the federal grant for administering these funds, this assessment form is
provided to document this eligibility or what is termed a “Categorical” or “Business Case” justification, which
will be reviewed by DEC for provisional compliance. For more information on green infrastructure
development, please review the following EPA web site:
http://cfpub.epa.gov/npdes/home.cfm?program_id=298
For those projects requiring a “Business Case,” Part 2 will require completion to qualify a “traditional project”
as green; justification is broken down into two parts, technical and financial. The technical part should use
information from a variety of sources such as maintenance or operation records, engineering studies, project
plans or other applicable documentation to identify problems (including any data on water and/or energy
inefficiencies) in the existing facility, and that clarifies the technical benefits from the project in water and/or
energy efficiency terms. Financial justification needs to show estimated savings to a project based on the
technical benefits, and demonstrate that the green component of the project provides a substantial savings and
environmental benefit.
For more information and assistance in completing this assessment form, please contact the Municipal Matching
Grants & Loans program in Anchorage at 907-269-7673, or in Juneau at 907-465-5300.
GENERAL INFORMATION
Name of Community
Address
Contact Name Title Telephone (907)
PROJECT INFORMATION
Project Name Location
Project Type: New Construction Upgrades
Stormwater Infrastructure Energy Efficiency Project
Water Efficiency Project Innovative Environmental Project
STATE OF ALASKA ALASKA CLEAN/DRINKING WATER FUND
GREEN PROJECT ASSESSMENT FORM
Anchorage
Eagle River Wastewater Treatment Facility, 15524 Artillery Road, Eagle River, Alaska.
Todd Carroll, P.E. Project Mgr. 564-2753
ERWWTF Rehabilitation Eagle River, AK
x
x (portion of Phase 1)
ADWF Green Project Assessment Form vs. 4/11 Page 2 of 3
Green Project Description:
PART 1 – GREEN PROJECT CATEGORY & COSTS
Identify the most appropriate “Green” Clean Water or Drinking Water category project type. Note,
any selection with (BC) at the end will require a Business Case demonstration.
ENERGY EFFICIENCY – the use of improved technologies and practices to reduce the energy consumption of water
quality projects.
Wastewater/water utility energy audits Clean power for public owned facilities
Leak detection equipment _______Retrofits/upgrades to pumps & treatment processes (BC)
_______ Replace/rehabilitation of distribution (BC) _______ Other:________________________________(BC)
WATER EFFICIENCY – the use of improved technologies and practices to deliver equal or better services with less
water.
Water meters Fixture Retrofit Landscape/Irrigation
Graywater or other water recycling Replace/rehabilitation of distribution (BC)
Leak detection equipment OTHER: ________________________ (BC)
GREEN INFRASTRUCTURE – Practices that manage and treat stormwater and that maintain and restore natural
hydrology by infiltrating, evapotranspiring and capturing and using stormwater.
Green Streets Water harvesting and reuse
Porous pavement, bioretention, trees, green roofs, water gardens, constructed wetlands
Hydromodification for riparian buffers, floodplains, and wetlands
Downspout disconnection to remove stormwater from combined sewers and storm sewers
OTHER: ______________________________ (BC)
ENVIRONMENTALLY INNOVATIVE PROJECTS – Demonstrate new/innovative approaches to managing water
resources in a more sustainable way. This may include projects that achieve pollution prevention or pollutant removal with
reduced costs and projects that foster adaptation of water protection programs and practices to climate change.
Wetland restoration Decentralized wastewater treatment solutions
Water reuse Green stormwater infrastructure Water balance approaches
Adaptation to climate change Integrated water resource management
OTHER: ______________________________ (BC)
Replacement of old energy inefficient windows and overhead garage doors that are original from 1981. By replacing the items listed this project will reduce the consumption of heating energy.
x Higher R-Value Windows/Doors
ADWF Green Project Assessment Form vs. 4/11 Page 3 of 3
PROJECT & GREEN COMPONENT COSTS
TOTAL TOTAL “GREEN”
PROJECT COSTS COMPONENT COSTS
Administration $ _________________ $ _________________
Legal $ _________________ $ _________________
Preliminary Studies/Reports $ _________________ $ _________________
Engineering Design $ _________________ $ _________________
Inspection/Surveying/Construction $ _________________ $ _________________
Management
Construction $ _________________ $ _________________
Equipment $ _________________ $ _________________
Contingencies $ _________________ $ _________________
Other _______________________ $ _________________ $ _________________
Total Costs $ _________________ $ _________________
PART 2 – PROJECT “BUSINESS CASE” TECHNICAL/FINANCIAL ASSESSMENT
TECHNICAL ANALYSIS OF BENEFITS*
In addition to this form, a supporting technical and financial analysis is required to verify energy and
water saving efficiencies for any green component of the project. For green infrastructure and
innovative environmental type projects, the analysis should include any applicable efficiency and
environmental benefits. For assisting MGL in evaluating “Business Case” assessments of water main,
meter, and pump facility replacement type projects, the attached form titled “ADWF - Water/Energy
Efficiency Determination - Water Main Replacement/Meter/Pump Facility” is required to be
completed. Once the form is complete along with any supporting documentation, please submit
documentation to the MGL program for review and concurrence. Note, only water/energy efficiencies
that achieve a 20% or greater increase in efficiency will categorically qualify as a Green project.
CERTIFICATION STATEMENT:
I certify the above information is current and accurate.
_________________________________ _______________________________
Name Title
_________________________________ ________________________________
Signature Date
Submit Completed Form to:
Alaska Department of Environmental Conservation
Municipal Matching Grants & Loans
555 Cordova Street
Anchorage, AK 99501-2617
0 0
0 50,000 25,000
125,000
25,000225,000
Todd Carroll, P.E. Project Manager
1,000,000
1,400,000300,000
10,000,000
7,300,000
20,000,000
10/24/2016
̸»®³¿½±®»®
ܱ±® ͧ¬»³
Ð ®± ¼ « ½ ¬ Ô · ² » Ó Ñ Ü Û Ô Í ëçï ëçî ëçí ëçì ëçê ëçè ëçç èëð
×ÒÜËÍÌÎÇ ÔÛßÜ×ÒÙÝÑÓÓÛÎÝ×ßÔ ú ×ÒÜËÍÌÎ×ßÔ ÍÑÔËÌ×ÑÒÍ
̸»®³¿½±®»r ܱ±® ͧ¬»³
̸»®³¿½±®»r
ÌØÛ ÌËÎÒÕÛÇ ÍÑËÎÝÛ ÚÑÎ ÝÑÓÓÛÎÝ×ßÔ ßÒÜ ×ÒÜËÍÌÎ×ßÔ ÍÑÔËÌ×ÑÒÍ ßÒÜ ÍÛÎÊ×ÝÛ
Í»´»½¬·±² ±º Ѫ»®¸»¿¼ ܱ±® °®±¼«½¬ ¿«¬±³¿¬·½¿´´§ ·²½´«¼» ¬¸» «²»¯«¿´»¼ »¨°»®¬·» ¿²¼ »¨°»®·»²½» ±º Ѫ»®¸»¿¼
ܱ±® Ü·¬®·¾«¬±®ò Ò¿¬·±²©·¼» ½±ª»®¿¹» ¾§ ±«® ±ª»® ìðð ¼·¬®·¾«¬±® · «²·¯«» ·² ±«® ·²¼«¬®§ Š °®±ª·¼·²¹ ¿ ·²¹´»
±«®½» º±® ¼»·¹² ¿²¼ ¿°°´·½¿¬·±² ½±²«´¬·²¹ô ·²¬¿´´¿¬·±²ô »®ª·½» ¿²¼ ±²¹±·²¹ ³¿·²¬»²¿²½»ò Ì«®²µ»§ »®ª·½» ¬±
³¿¨·³·¦» ¬¸» ´¿¬·²¹ ª¿´«» ±º §±«® °®±¼«½¬ ½¸±·½»ò DZ«® Ѫ»®¸»¿¼ ܱ±® Ü·¬®·¾«¬±® · ¿´± §±«® ±²´§ ±«®½» º±® ¿
Ú±® ±ª»® º±«® ¹»²»®¿¬·±²ô ±«® ¼·¬®·¾«¬±® ¸¿ª» ¾»»² ½±³³·¬¬»¼ ¬± °®±ª·¼·²¹ ½±³³»®½·¿´
¿²¼ ·²¼«¬®·¿´ ¹®·´´» ±´«¬·±²ò ݱ³¾·²»¼ ©·¬¸ Ѫ»®¸»¿¼ ܱ±® °®±¼«½¬ ¼»·¹² ¿²¼
³¿²«º¿½¬«®·²¹ «°»®·±®·¬§ô ±«® ¼·¬®·¾«¬±® ¿®» ¿ °®±«¼ °¿®¬ ±º ¬¸» Ѫ»®¸»¿¼ ܱ±® º¿³·´§ô
¸¿®·²¹ ±«® ²¿³»ô ±«® λ¼ η¾¾±² ́ ±¹± ¿²¼ ±«® ½±³³·¬³»²¬ ¬± ·²¼«¬®§ ́ »¿¼·²¹ ·²²±ª¿¬·±²
¿²¼ »¨½»´´»²½»ò
ÙÛÒÛÎßÔ ÚÛßÌËÎÛÍ ßÒÜ ÞÛÒÛÚ×ÌÍ
л®º±®³¿²½» «° ¬± òðè ½º³ñº¬n ¿¬ îë ÓÐØ øïòìê ³mñ¸®ñ³n÷
• Continuous foamed-in-place panel construction providesone of the highest R-values in the industry year in, year out
• Dual thermal break and joint seal between internal and
•
Ô·¹¸¬©»·¹¸¬ô ¬®±²¹ ¿²¼ ¼«®¿¾´» °¿²»´ ½±²¬®«½¬·±²
• Continuous foamed-in-place panel construction provides
weight ratio and proven durability• Roll-formed, hot-dipped galvanized steel interior and
exterior panels
• Two coats of baked-on polyester paint provide a
Ó»»¬ ¬®·²¹»²¬ ©·²¼ ´±¿¼ ®»¯«·®»³»²¬ ø±°¬·±²¿´÷
• Exceptional panel strength and superior track designwithstands harsh wind conditions.
Û²ª·®±²³»²¬¿´´§ º®·»²¼´§
• Specially formulated polyurethane foaminsulation ensures no ozone-damaging CFCs are usedin the manufacturing process or in the panels
• Unique design allows on-site door customizationfor quick and precise installation, replacement or repairs
• Standard door widths up to 40’2” (12243 mm) and heights upto 32’1” (9779 mm)
• Doors for extra-heavy-duty, heavy-duty, medium-duty andlight-duty applications
Þ«·´¬ ¬± ´¿¬
• 10-year* limited warranty against panel delaminationof foam and steel skins
• 1-year limited warranty on door• 3-year/20,000 cycle limited warranty on door and operator
system
Ø·¹¸ó«¿¹» ½±³°±²»²¬ º±® °»½·¿´ ¿°°´·½¿¬·±² °®±³±¬» ´±²¹ ´·º»
¿²¼ ´±© ³¿·²¬»²¿²½»
• Heavy-duty, precision ground headplate bearings forenhanced counterbalance performance
• Oil-tempered, heavy-duty helical wound, torsion springs,available in 25,000, 50,000, 75,000 or 100,000 cycles forextra long life
• Solid-steel counterbalance shaft reduces fatigue
• Double end stiles and end hinges lessen loads on door-section• Heavy-duty 3" (76 mm) hot-dipped galvanized steel track
and 10 ball-bearing, long-stem rollers• Additional center hinges reduce overall door section
hinge loads• Bottom sensing edge stops/reverses door upon contact
with an obstruction
öè󧻿® ±² ëçè Í»®·»
̸»®³¿½±®»r ܱ±® ͧ¬»³
ïóèððóçîçóÜÑÑÎ
1ÑÊÛÎØÛßÜ ÜÑÑÎ ÝÑÎÐÑÎßÌ×ÑÒ
̸»®³¿½±®»r ܱ±® ͧ¬»³
®
̸»®³¿½±®»r ܱ±® ͧ¬»³
Ó±¼»´ ëçï ëçîÓ±¼»´
Ó±¼»´ ëçì øο·»¼ п²»´÷
Ó±¼»´ ëçí ëçì
Ó±¼»´ ëçè
Ó±¼»´ ëçê
ô
Ó±¼»´ ëçï ëçî Ó±¼»´ ëçê ëçç
Ó±¼»´ ëçí
Ó±¼»´ èëð
Ó±¼»´ ëçè
Ó±¼»´ èëð
2
̸»®³¿½±®»r ܱ±® Í»´»½¬·±² ݸ¿®¬
Ó±¼»´ ëçî ëçï ëçí ëçè
Ó±¼»´ ëçì
Ù´¿¦·²¹
öÒ±¬ ¿ª¿·´¿¾´» ±² ëçèò ööÒ±¬ ¿ª¿·´¿¾´» ±² ëçïò Ò±¬ ¿ª¿·´¿¾´» ±² ¼±±® ©·¼»® ¬¸¿² îðŽîŒò
ײ«´¿¬»¼ ÜÍÞö øîìŒ © ¾§ éŒ ¸÷
ײ«´¿¬»¼ ÜÍÞ øîðòéëŒ © ¾§ ïëŒ ¸÷
ܱ«¾´» ̸»®³¿´ ß½®§´·½ øîëŒ © ¾§ ïîŒ ¸÷
ß´«³·²«³ Í¿¸ Í»½¬·±² ©·¬¸ ÜÍÞ Ù´¿¦·²¹
ß´«³·²«³ Í¿¸ Í»½¬·±²ö ©·¬¸ ÜÍÞ Ù´¿¦·²¹
̸»®³¿½±®»r ÙÛÒÛÎßÔ ÍÐÛÝ×Ú×ÝßÌ×ÑÒÍ
ß¼ª¿²½»¼ л®º±®³¿²½»øйò ì÷
èëðíþ
øéêòî ³³÷
îê
øìòëè÷
òðíè
øòîîð÷
òðç ½º³
øïòêë Ô°³÷
òîï ½º³
øëòçë Ô°³÷
Ü«¿´ ¬¸»®³¿´ ¾®»¿µ ú
¶±·²¬ »¿´
½´¿ îîòðïëŒ
øòíè ³³÷
³·½®±ó
¹®±±ª»ô
¬»¨¬«®»
ïè ¹¿ìðŽîŒ
øïîîìí ³³÷
íîŽïŒ
øçéëí ³³÷
©¸·¬»ô ¬¿²ô
¿´³±²¼ô
ײ¼«¬®·¿´ Þ®±©²
Û¨¬®¿ Ø»¿ª§ Ü«¬§øйò ë÷
ëçêîþ
øëï ³³÷
ïéòìð
øíòðê÷
òðëé
øòíîé÷
òðè ½º³
øîòîê Ô°³÷
òðè ½º³
øîòîê Ô°³÷ÐÊÝ ½´¿ îê
îðó¹¿ ¹¿´ªò
øòçï ³³÷
íêŽîŒ
øïïðîì ³³÷
îìŽïŒ
øéíìï ³³÷
©¸·¬»ô ¬¿²ô ¹®¿§ô
ײ¼«¬®·¿´ Þ®±©²
Ø»¿ª§ Ü«¬§øйò êŠé÷
ëççîþ
øëï ³³÷
ïéòëð
øíòðç÷
òðëé
øòíîì÷
òðè ½º³
øîòîê Ô°³÷
òðè ½º³
øîòîê Ô°³÷ÐÊÝ ½´¿ îê
òðïëþ
øòíè ³³÷
ìðùîþ
øïîîìí ³³÷
íîùïþ
øçééç ³³÷©¸·¬»
ëçîîŒ
øëï ³³÷
ïéòëð
øíòðç÷
òðëé
øòíîì÷
òðè ½º³
øîòîê Ô°³÷
òðè ½º³
øîòîê Ô°³÷ÐÊÝ Òñß
òðïëŒ
øòíè ³³÷®·¾¾»¼ ïê ¹¿
ìðŽîŒ
øïîîìí³³÷
íîŽïŒ
øçééç ³³÷
©¸·¬»ô ¬¿²ô ¹®¿§ô
ײ¼«¬®·¿´ Þ®±©²
Ì®·²¿® ©¸·¬»ô
Ì®·²¿® ¾®±©²ô
Ì®·²¿® ¾»·¹»
ëçïï ëñèþ
øìï ³³÷
ïìòèê
øîòêí÷
òðêé
øòíèð÷
òðè ½º³
øîòîê Ô°³÷
òðè ½º³
øîòîê Ô°³÷ÐÊÝ Òñß
òðïëþ
øòíè ³³÷®·¾¾»¼ ïê ¹¿
íëùîþ
øïðéïç ³³÷
îìùïþ
øéíìï ³³÷
©¸·¬»ô ¬¿²ô ¹®¿§ô
ײ¼«¬®·¿´ Þ®±©²
Ì®·²¿® ©¸·¬»ô
Ì®·²¿® ¾®±©²ô
Ì®·²¿® ¾»·¹»ô
л° Þ±§ ¹®¿§
Ó»¼·«³ Ü«¬§øйò è÷ ëçí
ï íñèþ
øíë ³³÷
ïîòéê
øîòîê÷
òðéè
øòììí÷
òðè ½º³
øîòîê Ô°³÷
òïë ½º³
øìòîì Ô°³÷ر¬ ³»´¬ Òñß
òðïëþ
øòíè ³³÷®·¾¾»¼ î𠹿
îðŽîþ
øêïìé ³³÷
ïêùïþ
øìçðî ³³÷
©¸·¬»ô ¬¿²ô ¹®¿§ô
ײ¼«¬®·¿´ Þ®±©²
Ì®·²¿® ©¸·¬»ô
Ì®·²¿® ¾®±©²ô
Ì®·²¿® ¾»·¹»ô
л° Þ±§ ¹®¿§
ëçìï íñèŒ
øíë ³³÷
ïîòéê
øîòîê÷
òðéè
øòììí÷
òðè ½º³
øîòîê Ô°³÷
òïë ½º³
øìòîì Ô°³÷
ر¬ ³»´¬ Òñß
òðïîþ
øòíð ³³÷
®¿·»¼
°¿²»´î𠹿
îðŽîŒ
øêïìé ³³÷
ïêŽïŒ
øìçðî ³³÷
©¸·¬»ô ¿´³±²¼ô
¿²¼¬±²»ô
¸«²¬»® ¹®»»²ô
½¸»¬²«¬ ¾®±©²ô
¬»®®¿ ¾®±²¦»
Ì®·²¿® ©¸·¬»ô
Ì®·²¿® ¾®±©²ô
Ì®·²¿® ¾»·¹»
Ô·¹¸¬ Ü«¬§øйò è÷ ëçè
ïŒ
øîë ³³÷
çòíï
øïòêì÷
òïðé
øòêðè÷
òîì ½º³
øêòèð Ô°³÷
òìê ½º³
øïíòðí Ô°³÷ر¬ ³»´¬ Òñß
òðïîŒ
øòíð ³³÷®·¾¾»¼ î𠹿
ïêùîþ
øìçîè ³³÷
ïìùïþ
øìîçí ³³÷©¸·¬»
ײº±®³¿¬·±² · «¾¶»½¬ ¬± ½¸¿²¹»ò д»¿» ½¿´´ §±«® ´±½¿´ Ѫ»®¸»¿¼ ܱ±® Ü·¬®·¾«¬±® º±® °»½·¿´ ¿°°´·½¿¬·±² ±® ·º §±«® ¿°°´·½¿¬·±² · ²±¬ ´·¬»¼ò
Ý´»¿® Ô±²¹ øììŒ © ¾§ ïëŒ ¸÷öö
Ù´¿¦·²¹
3ÑÊÛÎØÛßÜ ÜÑÑÎ ÝÑÎÐÑÎßÌ×ÑÒ
̸»®³¿½±®»r ܱ±® ͧ¬»³
Ó±¼»´ ëçê ëçç
Ù´¿¦·²¹
ܱ«¾´» ̸»®³¿´ ß½®§´·½ øîëŒ © ¾§ ïîŒ ¸÷ ß´«³·²«³ Í¿¸ Í»½¬·±² ©·¬¸ ÜÍÞ Ù´¿¦·²¹×²«´¿¬»¼ ÜÍÞ øîìŒ © ¾§ éŒ ¸÷
ßÊß×ÔßÞÔÛ ÑÐÌ×ÑÒÍ
• • • • • • • •
• • • • • • • • • • • •
• • • • • • • • • • • •
• • • • • • • • • • • •
• • • • • • • • • • • •
• • • • • • • • • • •
• • • • • • • • • • •
• • • • • • • •
Ó±¼»´ èëð
Ý´»¿® Ô±²¹ øììŒ © ¾§ ïëŒ ¸÷ö
Ô¿®¹» Ô·¬» øîëþ © ¾§ ïíþ ¸÷ߪ¿·´¿¾´» ©·¬¸ ·²«´¿¬»¼ ¹´¿ô ¬»³°»®»¼ ¹´¿ô ±® ³«´¬·ó©¿´´ °±´§½¿®¾±²¿¬» ¹´¿¦·²¹ ø¾®±©²ô ©¸·¬» ±® ½´»¿® ÷šò Þ´¿½µ º®¿³» · ¬¿²¼¿®¼ò ݱ´±® ³¿¬½¸»¼ º®¿³» ¿®» ¿ª¿·´¿¾´»ò
Ù´¿¦·²¹
öÒ±¬ ¿ª¿·´¿¾´» ±² ¼±±® ©·¼»® ¬¸¿² îðŽîŒò
4
Ø»¿ª§óÜ«¬§ ̸»®³¿½±®»r ܱ±®
ÓÑÜÛÔÍ èëð
ͬ¿²¼¿®¼ Ú»¿¬«®» ߬ ¿ Ù´¿²½»
Panel thickness 3" (76.2 mm)
R-value1 26 (4.58 m²/W)
U-value2 .038 (.22 W/m²)
Installed U-factor3 .14 Btu/hr * ft² * Fº (.80 W/m²)
STC Rating4 Class 22
at 15 mph (24 kmph)
.09 cfm/sq ft (1.65 m³/hr/m²)
Maximum width 40' 2" (12243 mm)
Maximum height 32' 1" (9753 mm)
Exterior steel .015" (.38 mm)
Exterior surface Microgroove, textured
Exterior color White, Brown, Almond, Taupe
Interior color White
Dual barrier tongue-in-groove meeting rail consists of the industry’s
Thermal break 1-3/4" wide PVC thermal break; PVC thermal break on end stiles
Perimeter protection
Header sealBottom weather seal; rigid PVC retainer with dual-durometer PVC bulb sealEnhanced thermal performance jamb seal (option)EPDM5 outer bulb seal recommended for more extreme environments (option)
Continuous hinge strip
Two continuous steel strips at top and bottom of section for hinge attachment
Standard springs 10,000 cycle
Limited Warranty 10-year delamination1-year material and workmanship3-year/20,000 cycle door and operator system (material and workmanship)
Ñ°¬·±²
• Large thermal lites (25" w x 13" h); black frame standard; optional color matched frame available• polycarbonate in clear, bronze, or white• High-cycle springs• High-usage components• Electric operator• Chain hoist• Cable failure device• Exhaust ports
ï Î󪿴«» · ¿ ³»¿«®» ±º ¬¸»®³¿´ »ºº·½·»²½§ò ̸» ¸·¹¸»® ¬¸» Î󪿴«» ¬¸» ¹®»¿¬»® ¬¸» ·²«´¿¬·²¹ °®±°»®¬·» ±º ¬¸» ¼±±®ò Ѫ»®¸»¿¼ ܱ±® ݱ®°±®¿¬·±² «» ¿ ½¿´½«´¿¬»¼ ¼±±® ½«®¬¿·² Î󪿴«» º±® ±«® ·²«´¿¬»¼ ¼±±®ò î Ë󪿴«» · ¿ ³»¿«®» ±º ¬¸» º´±© ±º ¸»¿¬ ¬¸®±«¹¸ ¿² ·²«´¿¬·²¹ ±® ¾«·´¼·²¹ ³¿¬»®·¿´å ¬¸» ´±©»® ¬¸» Ë󪿴«»ô ¬¸» ¾»¬¬»® ¬¸» ·²«´¿¬·²¹ ¿¾·´·¬§ò Ë󪿴«» · ¬¸» ·²ª»®» ±º Î󪿴«»òí ß ¬»¬»¼ ª¿´«» ±º ¿½¬«¿´ »²»®¹§ ´± ó ©¸»¬¸»® ¸»¿¬ ±® ½±´¼ ó ±º ¿² ·²¬¿´´»¼ ¼±±®ô ©¿´´ô ±® ©·²¼±© ¿»³¾´§ò ̸» ´±©»® ¬¸» ²«³¾»® ¬¸» ´±©»® ¬¸» »²»®¹§ ´± ¿²¼ ¬¸»®»º±®» ¬¸» ¾»¬¬»® ¬¸» ¬¸»®³¿´ °»® º±®³¿²½»ò Ú±® ¾»¬ Ë󺿽¬±®ô ½¸±±» º·²·¸ ¿²¼ ½±´±® ©·¬¸ ¸·¹¸ ±´¿® ®»º´»½¬¿²½» ø¾®·¹¸¬ ½±´±®÷òì ͱ«²¼ Ì®¿²³··±² Ý´¿ øÍÌÝ÷æ ¸±© ©»´´ ¬¸» ¼±±® ®»¼«½» ¿·®¾±®²» ±«²¼ò ̸» ¸·¹¸»® ¬¸» ²«³¾»® ¬¸» ¾»¬¬»® ±«²¼ ®»¼«½¬·±²òë Û¬¸§´»²» °®±°§´»²» ¼·»²» ³±²±³»® ®«¾¾»®ò Ë»¼ ·² ¬¸» ¿«¬±³±¬·ª» ·²¼«¬®§ º±® ·¬ «°»®·±® ¼«®¿¾·´·¬§ ¿²¼ ©»¿®¿¾·´·¬§ò
̸» ̸»®³¿½±®»r ßÐ Ó±¼»´ èëð · Ñª»®¸»¿¼ ܱ±®Ž
«°»®·±® ´»ª»´ ±º °®±¬»½¬·±² ¿¹¿·²¬ ¸»¿¬ ¿²¼ ½±´¼ò É·¬¸ »½¬·±² ¬¸¿¬ º»¿¬«®» íŒ ¬¸·½µ °±´§«®»¬¸¿²» º±¿³ ·²«´¿¬·±²ô ¬¸· ¼±±® · ¬¸» ¾»¬ ½¸±·½» º±® ¬¸»®³¿´ °®±¬»½¬·±² ¿¹¿·²¬ ¸»¿¬ ±® ½±´¼ ·² ¸»¿ª§ ¼«¬§ ¿°°´·½¿¬·±²ò Ú»¿¬«®» ±º ¬¸» Ó±¼»´ èëð ·²½´«¼» ¿² Î󪿴«» ±º îêô ¿ Ë󪿴«» ±º òðíèô ¿ ¬»¬»¼ Ë󺿽¬±® ±º òïì ¿²¼ ¿ °¿¬»²¬ó°»²¼·²¹ ¼«¿´ ¾¿®®·»®
ª·®¬«¿´´§ ·³°»²»¬®¿¾´» °¿¬¸ º±® ¿·® ´»¿µ¿¹» ·² ¾»¬©»»² »½¬·±²ò
www.OverheadDoor.com/architects corner.
ɸ·¬» Þ®±©²
ß´³±²¼ Ì¿«°»
ݱ´±® ¿ª¿·´¿¾´» ±² Ó±¼»´ èëð
4
5ÑÊÛÎØÛßÜ ÜÑÑÎ ÝÑÎÐÑÎßÌ×ÑÒ
̸»®³¿½±®»r ܱ±® ͧ¬»³
̸» ̸»®³¿½±®»r Ó±¼»´ ëçê ±ºº»® «°»®·±®
̸» ëçê · ½±²¬®«½¬»¼ ±º îð󹿫¹» ¹¿´ª¿²·¦»¼
̸» ëçê ¼±±® ¿´± ½¿®®§ ¿ Ý´¿ îê ±«²¼ ¬®¿²³··±² ®¿¬·²¹ º±® ¿°°´·½¿¬·±² ©¸»®» ±«²¼ «°°®»·±² · ¼»·®¿¾´»ò
ͬ¿²¼¿®¼ Ú»¿¬«®» ߬ ¿ Ù´¿²½»
Panel thickness 2” (51 mm)
R-value 17.40 (3.06 W/Msq)
U-value .057 (.327 Msq/W)
at 15 mph (24 kmph) .08 cfm/ft² (1.46 m³/hr/m²)
at 25 mph (40 kmph) .08 cfm/ft² (1.46 m³/hr/m²)
Thermal break PVC
Exterior steel 20-gauge galvanized
Exterior surface Flush, textured
Standard Springs 10,000 cycle
Sound transmission rating Class 26
Std. maximum width 36’2” (11024 mm)
Std. maximum height 24’1” (7341 mm)
Exterior color White, Gray, Tan,
Industrial Brown
Interior color White
Limited warranty 10-year delamination 1-year door 3-year/20,000 cycle door and operator system
Ñ°¬·±²
• Thermal glazing
• Aluminum sash section available to 24’2” (7366 mm) wide
• Four-section pass door
• High-usage components*
• Wind load options
• Electric operator
• Chain hoist
• Posi-Tension® drums
•
• Bottom-sensing edge
• Flexible jamb, header seal• Exhaust ports
ײ¬¿´´¿¬·±² ¿²¼ »®ª·½»æ Ѫ»®¸»¿¼ ܱ±® ݱ³°¿²§ ±º Ù´»² Ú¿´´
Û¨¬®¿óØ»¿ª§óÜ«¬§ ̸»®³¿½±®»r ܱ±®
ÓÑÜÛÔ ëçê
ײ¬¿´´¿¬·±² ¿²¼ »®ª·½»æ Ѫ»®¸»¿¼ ܱ±® ݱ³°¿²§ ±º Ù´»² Ú¿´´
www.OverheadDoor.com/architects corner.
ɸ·¬» ײ¼«¬®·¿´ Þ®±©²
Ù®¿§ Ì¿²
ݱ´±® ¿ª¿·´¿¾´» ±² Ó±¼»´ ëçê
6
É·¬¸ ¿ ïéòëð Î󪿴«» øíòðç ÉñÓ¯÷ ¿²¼ òðëéË󪿴«» øòíîì Ó¯ñÉ÷ô ¬¸» ̸»®³¿½±®»r Ó±¼»´
º±® ½±³³»®½·¿´ «»ò ̸» ëçîñëçç ¿´± ·²½±®°±®¿¬» ¿ ¬¸»®³¿´ ¾®»¿µ ¿²¼ ¶±·²¬ »¿´ ¬± °®»ª»²¬ ¬¸»®³¿´ ¬®¿²º»® ¾»¬©»»² »¨¬»®·±® ¿²¼ ·²¬»®·±® ¼±±® °¿²»´ µ·²ò ̸» ¼±±® · ¼»·¹²»¼ º±® ¬¸» ³±¬ ¼»³¿²¼·²¹ ·¬«¿¬·±²ô ·²½´«¼·²¹ ¸·¹¸ó ½§½´»ô ©·²¼ ´±¿¼ ¿²¼ ¬¸»®³¿´ ¿°°´·½¿¬·±²ò
Ø»¿ª§óÜ«¬§ ̸»®³¿½±®»r ܱ±®
ͬ¿²¼¿®¼ Ú»¿¬«®» ߬ ¿ Ù´¿²½»
Panel thickness 2” (51 mm)
R-value 17.50 (3.09 W/Msq)
U-value .057 (.324 Msq/W)
at 15 mph (24 kmph) .08 cfm/ft² (1.46 m³/hr/m²)
at 25 mph (40 kmph) .08 cfm/ft² (1.46 m³/hr/m²)
Thermal break PVC
Exterior steel .015" (.38 mm) galv.
Exterior surface 592–Ribbed, textured
599 –Flush, textured
Standard springs 10,000 cycle
Std. maximum width 40'2" (12243 mm)
Std. maximum height 32'1" (9779 mm)
Exterior color 592 - White, Tan, Gray, Industrial Brown, plus optional Trinar
599 - White only
Interior color White
Limited warranty 10-year delamination 1-year door 3-year/20,000 cycle door and operator system
Ñ°¬·±²
• Thermal glazing
• Aluminum sash section available to 24’2” (7366 mm) wide
• Four-section pass door
• High-usage components*
• Wind load options
• Electric operator
• Chain hoist
• Posi-Tension® drums
•
• Bottom-sensing edge
• Flexible jamb, header seal
• Exhaust ports
ײ¬¿´´¿¬·±² ¿²¼ »®ª·½»æ Ѫ»®¸»¿¼ ܱ±® ݱ³°¿²§ ±º ͱ«¬¸©»¬»®² ×¼¿¸±
ײ¬¿´´¿¬·±² ¿²¼ »®ª·½»æ Ѫ»®¸»¿¼ ܱ±® ݱ³°¿²§ ±º ß´¾¿²§
www.OverheadDoor.com/architects corner.
ÓÑÜÛÔÍ ëçî ëçç
ɸ·¬» ײ¼«¬®·¿´ Þ®±©²
Ù®¿§ Ì¿²
ݱ´±® ¿ª¿·´¿¾´» ±² Ó±¼»´ ëçî
ɸ·¬»
ݱ´±® ¿ª¿·´¿¾´» ±² Ó±¼»´ ëçç
Ñ°¬·±²¿´æ Ì®·²¿® ɸ·¬»ô Ì®·²¿® Þ»·¹» ¿²¼ Ì®·²¿® Þ®±©²
7ÑÊÛÎØÛßÜ ÜÑÑÎ ÝÑÎÐÑÎßÌ×ÑÒ
̸»®³¿½±®»r ܱ±® ͧ¬»³
̸» ̸»®³¿½±®»r ëçï · ¬¸» ¾»¬ó»´´·²¹ ¼±±® ·² ¬¸» ̸»®³¿½±®»r ´·²»ô ¿²¼ ±ºº»® «°»®·±®
¿°°´·½¿¬·±²ò ̸» Ó±¼»´ ëçï »¨¬»®·±® µ·² ·½±²¬®«½¬»¼ ±º ¹¿´ª¿²·¦»¼ ¬»»´ ©·¬¸ ¿
½±´±® º±® »¨¬»®·±®ô ·²½´«¼·²¹ ©¸·¬»ô ײ¼«¬®·¿´ Þ®±©²ô ¹®¿§ ¿²¼ ¬¿²ò
Ø»¿ª§óÜ«¬§ ̸»®³¿½±®»r ܱ±®
ͬ¿²¼¿®¼ Ú»¿¬«®» ߬ ¿ Ù´¿²½»
Panel thickness 1 5/8” (41 mm)
R-value 14.86 (2.63 W/Msq)
U-value .067 (.380 Msq/W)
at 15 mph (24 kmph) .08 cfm/ft² (1.46 m³/hr/m²)
at 25 mph (40 kmph) .08 cfm/ft² (1.46 m³/hr/m²)
Thermal break PVC
Exterior steel .015" (.38 mm) galv.
Exterior surface Ribbed, textured
Standard Springs 10,000 cycle
Std. maximum width 35'2" (10719 mm)
Std. maximum height 24'1" (7341 mm)
Exterior color White, Tan, Gray, Industrial Brown plus optional Trinar
Interior color White
Limited warranty 10-year delamination 1-year door 3-year/20,000 cycle door and operator system
Ñ°¬·±²
• Thermal glazing
• Aluminum sash section available to 24’2” (7366 mm) wide
• Four-section pass door
• High-usage components*
• Wind load options
• Electric operator
• Chain hoist
• Posi-Tension® drums
•
• Bottom-sensing edge
• Flexible jamb, header seal
• Exhaust ports
www.OverheadDoor.com/architects corner.
ײ¬¿´´¿¬·±² ¿²¼ »®ª·½»æ Ѫ»®¸»¿¼ ܱ±® ݱ³°¿²§ ±º Ì©·² Ú¿´´
ײ¬¿´´¿¬·±² ¿²¼ »®ª·½»æ Ѫ»®¸»¿¼ ܱ±® ݱ³°¿²§ ±º Ì©·² Ú¿´´
ÓÑÜÛÔ ëçï
ɸ·¬» ײ¼«¬®·¿´ Þ®±©²
Ù®¿§ Ì¿²
ݱ´±® ¿ª¿·´¿¾´» ±² Ó±¼»´ ëçï
Ñ°¬·±²¿´æ Ì®·²¿® ɸ·¬»ô Ì®·²¿® Þ»·¹» ¿²¼ Ì®·²¿® Þ®±©²
8
̸» ̸»®³¿½±®»r Ó±¼»´ ëçí ¿²¼ ëçì ±ºº»®
¿°°´·½¿¬·±²ò ̸» ëçí º»¿¬«®» ¿ ®·¾¾»¼ô ¬»¨¬«®»¼ «®º¿½»ò̸» ëçì º»¿¬«®» ¿ ®¿·»¼ó°¿²»´ô ©±±¼¹®¿·² ¬»¨¬«®»¼ «®º¿½» º±® ¿ ³±®» ¼»½±®¿¬·ª» ¿°°»¿®¿²½»ò
ͬ¿²¼¿®¼ Ú»¿¬«®» ߬ ¿ Ù´¿²½»
Panel thickness 1 3/8” (35 mm)R-value 12.76 (2.26 W/Msq)U-value .078 (.443 Msq/W)
at 15 mph (24 kmph) .08 cfm/ft² (1.46 m³/hr/m²)
at 25 mph (40 kmph) .15 cfm/ft² (2.7 m³/hr/m²)
Thermal break Hot melt Exterior steel .015" (.38 mm) galv. (593)
.012" (.3 mm) galv. (594)Exterior surface 593–Ribbed, textured
594–Raised-panel, texturedStandard Springs 10,000 cycleStd. maximum width 20’2” (6147 mm)Std. maximum height 16’1” (4902 mm)
Brown, plus optional Trinar
and Pep Boy gray
Sandstone, Hunter Green, Terra Bronze, plus optional Trinar
Interior color White
Limited warranty 10-year delamination 1-year door 3-year/20,000 cycle door and operator system
Ñ°¬·±²
• Thermal glazing• Aluminum sash section available• High-usage components*• Wind load options• Electric operator• Chain hoist
• Posi-Tension® drums•• Bottom-sensing edge• Flexible jamb, header seal• Exhaust ports
ײ¬¿´´¿¬·±² ¿²¼ »®ª·½»æ Ѫ»®¸»¿¼ ܱ±® ݱ³°¿²§ ±º Ì©·² Ú¿´´
Ó»¼·«³óÜ«¬§ ̸»®³¿½±®»r ܱ±®
ÓÑÜÛÔÍ ëçí ëçì
ײ¬¿´´¿¬·±² ¿²¼ »®ª·½»æ Ѫ»®¸»¿¼ ܱ±® ݱ³°¿²§ ±º Ì©·² Ú¿´´
www.OverheadDoor.com/architects corner.
ɸ·¬» ײ¼«¬®·¿´ Þ®±©²
Ù®¿§ Ì¿²
ݱ´±® ¿ª¿·´¿¾´» ±² Ó±¼»´ ëçí
ɸ·¬» ß´³±²¼
Í¿²¼ó¬±²»
Ø«²¬»® Ù®»»²
Þ®±©²
Ì»®®¿ Þ®±²¦»
ݱ´±® ¿ª¿·´¿¾´» ±² Ó±¼»´ ëçì
* Refer to General Features
front cover
Ñ°¬·±²¿´æ Ì®·²¿® ɸ·¬»ô Ì®·²¿® Þ»·¹» ¿²¼ Ì®·²¿® Þ®±©²
Ñ°¬·±²¿´æ Ì®·²¿® ɸ·¬»ô Ì®·²¿® Þ»·¹» ¿²¼ Ì®·²¿® Þ®±©²
9ÑÊÛÎØÛßÜ ÜÑÑÎ ÝÑÎÐÑÎßÌ×ÑÒ
̸»®³¿½±®»r ܱ±® ͧ¬»³
̸» ̸»®³¿½±®»r Ó±¼»´ ëçè · ¿ ¯«¿´·¬§¬¸»®³¿´ ¼±±® ¬¸¿¬ °®±ª·¼» ¿ ¸·¹¸»® ´»ª»´ ±º°®±¬»½¬·±² ¿¹¿·²¬ ¸»¿¬ ¿²¼ ½±´¼ ½±²¼«½¬·ª·¬§¬¸¿² ¬¿²¼¿®¼ ·²«´¿¬»¼ ¼±±®ò ̸» ëçè ¼±±® ®»°®»»²¬ ¬¸» »½±²±³·½¿´ ½¸±·½» º±®´·¹¸¬»®ó¼«¬§ ¿°°´·½¿¬·±²ò
ͬ¿²¼¿®¼ Ú»¿¬«®» ߬ ¿ Ù´¿²½»
Panel thickness 1” (25.4 mm)
R-value 9.31 (1.64 W/Msq)
U-value .107 (.608Msq/W)
Thermal break Hot melt
Exterior steel .012" (.3 mm) galv.
Exterior surface Ribbed, textured
Standard Springs 10,000 cycle
Std. maximum width 16’2” (4928 mm)
Std. maximum height 14’1” (4293 mm)
Exterior color White
Interior color White
Limited warranty 8-year delamination 1-year door 3-year/20,000 cycle door and operator system
Ñ°¬·±²
• Thermal glazing
• High cycle springs
• Wind load options
• Electric operator
• Chain hoist
• Posi-Tension® drums
•
• Flexible jamb, header seal
ײ¬¿´´¿¬·±² ¿²¼ »®ª·½»æ Ѫ»®¸»¿¼ ܱ±® ݱ³°¿²§ ±º ß´¾¿²§
Ô·¹¸¬óÜ«¬§ ̸»®³¿½±®»r ܱ±®
ÓÑÜÛÔ ëçè
ײ¬¿´´¿¬·±² ¿²¼ »®ª·½»æ Ѫ»®¸»¿¼ ܱ±® ݱ³°¿²§ ±º ͱ«¬¸©»¬»®² ×¼¿¸±
www.OverheadDoor.com/architects corner.
ɸ·¬»
ݱ´±® ¿ª¿·´¿¾´» ±² Ó±¼»´ ëçè
10
Ú®¿³·²¹ ú п¼ Ü»¬¿·´
Ú®¿³·²¹ ¿²¼ °¿¼ ¼»¬¿·´ º±® ½±³³±² ·²¬¿´´¿¬·±² ±º ̸»®³¿½±®»r ¼±±® ·² ¬»»´ô ©±±¼ô ½±²½®»¬» ¿²¼
³¿±²®§ ¶¿³¾ ¿®» °®±ª·¼»¼ ¸»®»ò ׺ §±« ®»¯«·®» ¿¼¼·¬·±²¿´ ·²º±®³¿¬·±² ±® ¸¿ª» °»½·¿´ °®±¶»½¬
®»¯«·®»³»²¬ô ®»º»® ¬± ¬¸» Ѫ»®¸»¿¼ ܱ±® ß®½¸·¬»½¬«®¿´ Ü»·¹² Ó¿²«¿´ô ±® ½±²«´¬ ©·¬¸ ¬¸» Ѫ»®¸»¿¼
ܱ±® ß°°´·½¿¬·±² Û²¹·²»»®·²¹ Ù®±«° ±® §±«® ´±½¿´ Ѫ»®¸»¿¼ ܱ±® Ü·¬®·¾«¬±®ò
îþ øëï ³³÷ Ì®¿½µ
íŒ øéê ³³÷ö Ì®¿½µ
ͬ»»´ Ö¿³¾
îŒ øëï ³³÷ Ì®¿½µ
íŒ øéê ³³÷ö Ì®¿½µ
ɱ±¼ Ö¿³¾
îŒ øëï ³³÷ Ì®¿½µ
íŒ øéê ³³÷ö Ì®¿½µ
ݱ²½®»¬»ñÓ¿±²®§ Ö¿³¾
Ó·²·³«³ λ¯«·®»¼ Í·¼»®±±³
Ì®¿½µ ̧°» îþ Ì®¿½µ øëï ³³÷ íþ Ì®¿½µ øéê ³³÷ö
ͬ¿²¼¿®¼ Ô·º¬ í ïñîþ øèç ³³÷ ë ïñîþ øïìð ³³÷
Ô±© Ø»¿¼®±±³ èþ øîðí ³³÷ çþ øîîç ³³÷
Ô·º¬ Ý´»¿®¿²½» í ïñîþ øèç ³³÷ ë ïñîþ øïìð ³³÷
Ú«´´ Ê»®¬·½¿´ í ïñîŒ øèç ³³÷ ë ïñîŒ øïìð ³³÷
Ó·²·³«³ λ¯«·®»¼ Í·¼»®±±³
Ì®¿½µ ̧°» îþ Ì®¿½µ øëï ³³÷ íþ Ì®¿½µ øéê ³³÷ö
ͬ¿²¼¿®¼ Ô·º¬ ì ïñîþ øïïì ³³÷ ê ïñîþ øïêë ³³÷
Ô±© Ø»¿¼®±±³ çþ øîîç ³³÷ ïðþ øîëì ³³÷
Ô·º¬ Ý´»¿®¿²½» ì ïñîþ øïïì ³³÷ ê ïñîŒ øïêë ³³÷
Ú«´´ Ê»®¬·½¿´ ì ïñîŒ øïïì ³³÷ ë ïñîŒ øïìð ³³÷
ö íþ øéê ³³÷ ¬®¿½µ ²±¬ ¿ª¿·´¿¾´» ©·¬¸ Ó±¼»´ ëçèò
11ÑÊÛÎØÛßÜ ÜÑÑÎ ÝÑÎÐÑÎßÌ×ÑÒ
̸»®³¿½±®»r ܱ±® ͧ¬»³Ì®¿½µ Ü»¬¿·´
ß²§ ±º ¬¸» º±´´±©·²¹ ¬®¿½µ ½±²º·¹«®¿¬·±² ½¿² ¾» »´»½¬»¼ º±® ¿´´ ̸»®³¿½±®»r Ó±¼»´òÑòØòãÑ°»²·²¹ Ø»·¹¸¬ ÔòÝòãÔ·º¬ Ý´»¿®¿²½» ÜòØòãܱ±® Ø»·¹¸¬
ͬ¿²¼¿®¼ Ô·º¬ Ì®¿½µ
Ô±© Ø»¿¼®±±³ Ì®¿½µÍ°®·²¹ ¬± Ú®±²¬
Ô±© Ø»¿¼®±±³ Ì®¿½µÍ°®·²¹ ¬± λ¿®
Ô·º¬ Ý´»¿®¿²½» Ì®¿½µÍ¬¿²¼¿®¼
Ú«´´ Ê»®¬·½¿´ Ì®¿½µ
îþ øëï ³³÷ Ì®¿½µ Åïëþ øíèï ³³÷ ο¼·«Ã
ܱ±® Ø»·¹¸¬ Ý»²¬»®´·²» ±º ͸¿º¬ Ó·²·³«³ Ø»¿¼®±±³
íŒ øéê ³³÷ Ì®¿½µ Åïëþ øíèï ³³÷ ο¼·«Ã
îþ øëï ³³÷ Ì®¿½µ Åïëþ øíèï ³³÷ ο¼·«Ã
ܱ±® Ø»·¹¸¬ Ý»²¬»®´·²» ±º ͸¿º¬ Ó·²·³«³ Ø»¿¼®±±³
Ì̧ ®« ïîùðþ øíêëè ³³÷ ÜòØò õ èþ øîðí ³³÷ ïï íñìþ øîçç ³³÷
Ì̧ ®« ïêŽðŒ øìèéé ³³÷ ÜòØò õ èŒ øîðí ³³÷ ïî ïñîŒ øíïè ³³÷
íŒ øéê ³³÷ Ì®¿½µ Åïëþ øíèï ³³÷ ο¼·«Ã
Ì̧ ®« ïîŽðŒ øíêëè ³³÷ ÜòØò õ çŒ øîîç ³³÷ ïíŒ øííð ³³÷
Ì̧ ®« íîŽðŒ øëìèê ³³÷ ÜòØò õ çŒ øîîç ³³÷ ïí íñìŒ øíìç ³³÷
îþ øëï ³³÷ Ì®¿½µ Åïëþ øíèï ³³÷ ο¼·«Ã
ܱ±® Ø»·¹¸¬ Ý»²¬»®´·²» ±º ͸¿º¬ Ó·²·³«³ Ø»¿¼®±±³
íŒ øéê ³³÷ Ì®¿½µ Åïëþ øíèï ³³÷ ο¼·«Ã
12
Û´»½¬®·½ Ñ°»®¿¬±®
Ѫ»®¸»¿¼ ܱ±® ݱ®°±®¿¬·±² ±ºº»® ¬¸»
¾®±¿¼»¬ ´·²» ±º »´»½¬®·½ ±°»®¿¬±® ¬± «·¬ ²»©
«²««¿´ ±® °»½·¿´ ®»¯«·®»³»²¬ò
Ó¿²«º¿½¬«®»¼ ¾§ Ѫ»®¸»¿¼ ܱ±® ݱ®°±®¿¬·±² ¬±
³»»¬ ¬¸» »¨¿½¬·²¹ °»®º±®³¿²½» ®»¯«·®»³»²¬ ±º
Ѫ»®¸»¿¼ ܱ±®Ž «°©¿®¼ó¿½¬·²¹ ¼±±®ô ±«® ®·¾¾±²
¾®¿²¼»¼ ±°»®¿¬±® ¿ºº±®¼ °®»½·» ½±²¬®±´ ±º ¼±±®
¿½¬·±² º±® §»¿® ±º ¬®±«¾´»óº®»» ±°»®¿¬·±²ò
ײ ±®¼»® ¬± ·³°®±ª» ¿º»¬§ ¿²¼ »²¸¿²½» ¼±±®
¿²¼ ³±¬±® ´·º»ô ·²¼«¬®§ ¯«¿´·¬§ ¿«®¿²½» ¹«·¼»´·²»
®»½±³³»²¼ ¬¸» ½¸±·½» ±º ¿ ·²¹´»
³¿²«º¿½¬«®»® º±® ¾±¬¸ ¼±±® ¿²¼ ±°»®¿¬±®
¿°°´·½¿¬·±²ò Ѫ»®¸»¿¼ ܱ±® ݱ®°±®¿¬·±² · ¬¸» ±²´§
²¿¬·±²¿´ ³¿²«º¿½¬«®»® ±º ¿ º«´´ ´·²» ±º ½±³³»®½·¿´ ¿²¼
º±® ·²¬»¹®¿´ ¿°°´·½¿¬·±²ò
Ñ°»®¿¬±® Ó±¼»´
Ó±¼»´ ÎÓÈr
Model RMX® is an advanced medium-
duty operator. It is designed for quicker
installation and hassle-free operation
and operates doors up to 14’ (4267 mm)
in height and 620 pounds (281 kg). It
is available as a trolley-type or side-
mounted unit.
Ó±¼»´ ÎÍÈr
Model RSX® is a standard duty
commercial operator designed to
operate doors up to 24’ (7315 mm)
in height and 1,620 pounds (735 kg).
It offers unique features like
LimitLock®, SuperBelt™ & 16 digit
menu setup.
Ó±¼»´ ÎØÈr
Model RHX® is a heavy duty commercial
operator designed to operate doors up to
24’ (7315 mm) in height and 3,696 pounds
(1676 kg). Available as either a trolley,
sidemount or centermount.
Ñ°»®¿¬±® ݱ²¬®±´ Ñ°¬·±²
• Push-button, key or combination stations;
exterior locations
• Vehicle detectors, key card reader, photocell
and door timer controls
• Treadle or pull switch stations
• Telephone entry and coded keyboard stations
• Universal programmable door timer
• Commercial light package
• Radio control systems (24 VAC or 120 VAC)
• Explosion and dust ignition-proof systems
Û´»½¬®·½ Ñ°»®¿¬±® Í»´»½¬·±² Ù«·¼»
ÎØÈr ïñî ØÐô íñì ØÐï ØÐô í ØÐ
îìŽøéíïë ³³÷
íççê ´¾øïêéê µ¹÷ • • • • Ìô Íô Ý
ÎÍÈr ïñî ØÐô íñì ØÐï ØÐ
îìŽøéíïë ³³÷
ïêîðøéíë µ¹÷ • • • • Ìô Íô Ý
ÎÓÈr ïñî ØÐ ïìŽøìîêé ³³÷
êîðøîèï µ¹÷
Ìô Í
Ó±«²¬·²¹ Ñ°¬·±²æ ÌãÌ®±´´»§ ÍãÍ·¼» ³±«²¬ Ýã Ý»²¬»® ³±«²¬
Í¿º»¬§ λ½±³³»²¼¿¬·±²
Overhead Door Corporation strongly recommends
the use of a primary safety device as defined by
UL325 2010. A primary safety device can be approved
monitored photo-eyes or an approved monitored sensing
edge. If a primary safety device is not installed, a
constant contact control switch must be used to close the
door. Contact Overhead Door for more information.
13ÑÊÛÎØÛßÜ ÜÑÑÎ ÝÑÎÐÑÎßÌ×ÑÒ
̸»®³¿½±®»r ܱ±® ͧ¬»³
ë íñìþ
ÌÇÐ×ÝßÔ Ó×Òò
Í×ÜÛ ÎÑÑÓ
ë ïñîþ
ì íñïêþ
é ëñïêþ
ïî ïíñïêþ
í ëñèþ
Ó±«²¬·²¹ Ü»¬¿·´
Trolley-type (Drawbar) operators feature a power unit mounted between, above and to the rear of the horizontal tracks. The drawbar drive provides positive con-trol of the door at all times, making this operator the preferred choice whenever possible. Maximum door width is 20' per drawbar. Door width over 20' requires dual drawbar installation. Available on Models RMX®, RSX® and RHX®.
Ì®±´´»§ó¬§°» øÜ®¿©¾¿®÷ÎÓÈrô ÎÍÈrôÎØÈr
Side-mounted (Jackshaft) RMX®, RSX®, and RHX® operators feature a power unit mounted on the inside front wall and connected to the crosshead shaft, with an adjustable coupling or drive chain and sprockets.
Í·¼» Ó±«²¬ ̧°» øÖ¿½µ¸¿º¬÷ÎÓÈrô ÎÍÈr
Center-mounted (Jackshaft) operators feature a power unit on the front wall above the door opening. No additional backroom is required. Available on mod-els RSX® and RMX®.
Ý»²¬»® Ó±«²¬ ̧°» øÖ¿½µ¸¿º¬÷ ÎÓÈr
Ü»°¬¸ λ¯«·®»³»²¬ ó �ߌ Ü·³»²·±² øÞ¿½µ®±±³÷
ÎÓÈ Ü±±® Ø»·¹¸¬ õíù çþ øïïìí ³³÷
ÎÍÈ Ü±±® Ø»·¹¸¬ õìŽ ïŒ øïîìì ³³÷
ÎØÈ Ü±±® Ø»·¹¸¬ õëŽ ïðŒ øïëîì ³³÷
Ó·²·³«³ Ø»¿¼®±±³ λ¯«·®»³»²¬
ÎÓÈ Ì®¿½µ λ¯«·®»³»²¬ õì ïñîþ øïïì ³³÷
ÎÍÈ Ì®¿½µ λ¯«·®»³»²¬ õëŒ øïîé ³³÷
ÎØÈ Ì®¿½µ λ¯«·®»³»²¬ õëŒ øïîé ³³÷
�ߌ Ü·³»²·±² ó Ó·²·³«³ øÍ·¼»®±±³÷
îþ Ì®¿½µ øëï ³³÷ íþ Ì®¿½µ øéê ³³÷ö
ÎÓÈ ïè ïñîþ øìéð ³³÷ ïç ïñîŒ øìçë ³³÷
ÎÍÈ îïŒ øëíí ³³÷ îîŒ øëëç ³³÷
ÎØÈ îïŒ øëíí ³³÷ îîŒ øëëç ³³÷
Ó·²·³«³ Ø»¿¼®±±³ λ¯«·®»³»²¬
ÎÍÈ Ì®¿½µ λ¯«·®»³»²¬ õïìŒ øíëê ³³÷
ÎØÈ Ì®¿½µ λ¯«·®»³»²¬ õîí ëñèŒ øêðð ³³÷
̸» Ñ®·¹·²¿´ô ´²²±ª¿¬·ª» ݸ±·½» º±® ˲»¯«¿´´»¼ Ï«¿´·¬§ ¿²¼ Í»®ª·½»
Ѫ»®¸»¿¼ ܱ±® ݱ®°±®¿¬·±² °·±²»»®»¼ ¬¸» «°©¿®¼ó¿½¬·²¹ ¼±±® ·²¼«¬®§ô ·²ª»²¬·²¹ ¬¸» º·®¬ «°©¿®¼ó
¿½¬·²¹ ¼±±® ·² ïçîï ¿²¼ ¬¸» º·®¬ »´»½¬®·½ ¼±±® ±°»®¿¬±® ·² ïçîêò ̱¼¿§ô ©» ½±²¬·²«» ¬± ¾» ¬¸» ·²¼«¬®§
´»¿¼»® ¬¸®±«¹¸ ¬¸» ¬®»²¹¬¸ ±º ±«® °®±¼«½¬ ·²²±ª¿¬·±²ô «°»®·±® ½®¿º¬³¿²¸·° ¿²¼ ±«¬¬¿²¼·²¹ ½«¬±³»®
«°°±®¬ô «²¼»®½±®·²¹ ¿ ´»¹¿½§ ±º ¯«¿´·¬§ô »¨°»®¬·» ¿²¼ ·²¬»¹®·¬§ò ̸¿¬Ž ©¸§ ¼»·¹² ¿²¼ ½±²¬®«½¬·±²
°®±º»·±²¿´ °»½·º§ Ѫ»®¸»¿¼ ܱ±® ݱ®°±®¿¬·±² °®±¼«½¬ ³±®» ±º¬»² ¬¸¿² ¿²§ ±¬¸»® ¾®¿²¼ò
̸» Ѫ»®¸»¿¼ ܱ±® λ¼ η¾¾±² · ¿ ³¿®µ ±º ¯«¿´·¬§ ¬¸¿¬ ¿´± ®»º´»½¬ ¬¸» °®·¼» ©» ¬¿µ» ·² ¬¸» °»±°´» ©¸± «°°±®¬ ±«® °®±¼«½¬ò
Ñ«® º¿³·´§ ±º ±ª»® ìðð Ѫ»®¸»¿¼ ܱ±® Ü·¬®·¾«¬±® ¿½®± ¬¸» ½±«²¬®§ ²±¬ ±²´§ ¸¿®» ±«® ²¿³» ¿²¼ ´±¹±ô ¾«¬ ¿´± ±«® ½±³³·¬³»²¬
¬± »¨½»´´»²½»ò DZ«® Ѫ»®¸»¿¼ ܱ±® Ü·¬®·¾«¬±® ©·´´ ©±®µ ©·¬¸ §±« ·² ¿ ½±²«´¬¿¬·ª» ®±´» ¬± »²«®» ¬¸¿¬ °®±¼«½¬ »´»½¬·±² ¿½¸·»ª»
§±«® ¼»·¹² ¿²¼ ¿°°´·½¿¬·±² ®»¯«·®»³»²¬ ‰ ·² ¿¼¼·¬·±² ¬± ±ºº»®·²¹ »¨°»®¬ ·²¬¿´´¿¬·±²ô °®±º»·±²¿´ º·»´¼ »®ª·½» ¿²¼ ±²¹±·²¹
³¿·²¬»²¿²½»ò Ú®±³ °®±¶»½¬ ¼»·¹² ¿²¼ ³¿²«º¿½¬«®·²¹ ¬± ·²¬¿´´¿¬·±² ¿²¼ »®ª·½»ô ¬¸» Ѫ»®¸»¿¼ ܱ±® λ¼ η¾¾±² · §±«®
¹«¿®¿²¬»» ±º ¹»²«·²» ¯«¿´·¬§ ¿²¼ ¬«®²µ»§ »®ª·½» »¨½»´´»²½»ò
̱¹»¬¸»® ©·¬¸ ±«® ¼·¬®·¾«¬±®ô ©» ±ºº»® ½±³°®»¸»²·ª» ¬»½¸²·½¿´ ·²º±®³¿¬·±² ¿²¼ ®»±«®½» ³¿¬»®·¿´ ¬± «°°±®¬
§±«® °®±¶»½¬ô ·²½´«¼·²¹æ
¡ ß®½¸·¬»½¬«®¿´ Ü»·¹² Ó¿²«¿´ Š ¿ ½±³°®»¸»²·ª» ¹«·¼» ¬± »´»½¬·²¹ô °»½·º§·²¹ ¿²¼ ¼»¬¿·´·²¹ ¿´´ ½±³³»®½·¿´ ¿²¼ ·²¼«¬®·¿´
Ѫ»®¸»¿¼ ܱ±® °®±¼«½¬ ½¿² ¾» º±«²¼ ¿¬ ©©©òѪ»®¸»¿¼Ü±±®ò½±³ñßÜÓñ¾¿»ò¸¬³´
¡ Ñ°»®¿¬·±² ú Ó¿·²¬»²¿²½» Ó¿²«¿´ Š ¼»¬¿·´»¼ °®±¼«½¬ ·²º±®³¿¬·±²ô ½«¬±³·¦»¼ º±® §±«® °®±¶»½¬ô ¬± »²«®» ®»´·¿¾´»ô ´±²¹ó´·º»
¼±±® §¬»³ ±°»®¿¬·±²
¡ Ý«¬±³ ¿°°´·½¿¬·±² ¿²¼ ¬»½¸²·½¿´ ¿·¬¿²½» ¬¸®±«¹¸ ±®¼»®·²¹ °´¿²¬Ž ½«¬±³»® »®ª·½» ¿²¼ ¬»½¸²·½¿´ »®ª·½» ®»°»½¬·ª»´§
¡ Ê··¬ ±«® ß®½¸·¬»½¬Ž ݱ®²»® ¿¬ ©©©òѪ»®¸»¿¼Ü±±®ò½±³
̱¼¿§ô Ѫ»®¸»¿¼ ܱ±® ݱ®°±®¿¬·±² Š ¿´±²¹ ©·¬¸ ±«® ر®¬±² ß«¬±³¿¬·½ ¼·ª··±²ô º±® ¿«¬±³¿¬»¼ °»¼»¬®·¿² »²¬®¿²½» Š ·
®»½±¹²·¦»¼ ¿ ¬¸» ´»¿¼·²¹ô ·²¹´»ó±«®½» ³¿²«º¿½¬«®»® ±º ·²¬»¹®¿¬»¼ ¼±±® ¿²¼ ±°»®¿¬±® §¬»³ º±® ½±³³»®½·¿´ô ·²¼«¬®·¿´ ¿²¼
®»·¼»²¬·¿´ ¿°°´·½¿¬·±²ò É·¬¸ ³«´¬·°´» ³¿²«º¿½¬«®·²¹ ´±½¿¬·±² ¬¸®±«¹¸±«¬ ¬¸» ˲·¬»¼ ͬ¿¬»ô ¿ ¬¿¬»ó±ºó¬¸»ó¿®¬ ÌÎÛÏ øÌ»¬·²¹ô
λ´·¿¾·´·¬§ô Û²¹·²»»®·²¹ô ¿²¼ Ï«¿´·¬§÷ Ý»²¬»® º±® ¼»·¹² ¿²¼ »²¹·²»»®·²¹ô ¿²¼ ¿ ²¿¬·±²¿´ ²»¬©±®µ ±º ¿«¬¸±®·¦»¼ Ѫ»®¸»¿¼ ܱ±®
Ü·¬®·¾«¬±®ô ±«® ½¿°¿¾·´·¬·» ¿®» ´»¿¼·²¹ó»¼¹» ¿²¼ ±«® º·»´¼ »®ª·½» ¿²¼ ¬»½¸²·½¿´ «°°±®¬ »½±²¼ ¬± ²±²»ò Þ«·´¬ ¾»¬ ¿²¼ ¾¿½µ»¼
¾»¬ô Ѫ»®¸»¿¼ ܱ±® · ¬¸» ·²¼«¬®§Ž ´»¿¼·²¹ ½¸±·½» º±® ¯«¿´·¬§ ¬¸¿¬ ¸±© ¿²¼ ´¿¬ò
̱ ¬¿´µ ©·¬¸ ¬¸» Ѫ»®¸»¿¼ ܱ±® Ü·¬®·¾«¬±® ²»¿®»¬ §±«ô ½¿´´ ïóèððóçîçóÜÑÑÎò
Ѫ»®¸»¿¼ ܱ±® ݱ®°±®¿¬·±²
îëðï Íò ͬ¿¬» Ø©§ò ïîï Þ«òô Í«·¬» îðð
Ô»©·ª·´´»ô Ì»¨¿ éëðêé
ïóèððóçîçóÜÑÑÎ
©©©òѪ»®¸»¿¼Ü±±®ò½±³Ì¸» Ѫ»®¸»¿¼ ܱ±® ݱ®°±®¿¬·±² º¿³·´§ ±º ¯«¿´·¬§ ½±³³»®½·¿´ ¿²¼ ·²¼«¬®·¿´ °®±¼«½¬ ·²½´«¼»æ
ß °¿®¬ ±º Í¿²©¿ ر´¼·²¹ ݱ®°±®¿¬·±²
×ÒÜËÍÌÎÇ ÔÛßÜ×ÒÙ
ÝÑÓÓÛÎÝ×ßÔ ú ×ÒÜËÍÌÎ×ßÔ ÍÑÔËÌ×ÑÒÍ
ß¼ª¿²½»¼ α´´·²¹ ͬ»»´ ܱ±® ο°·¼Í´¿¬r
̸»®³¿½±®»r Í»½¬·±²¿´ ܱ±® α´´·²¹ ú Í·¼» Ú±´¼·²¹Í»½«®·¬§ Ù®·´´» ú Ý´±«®»
α´´·²¹ Í»®ª·½» ܱ±® ݱ³³»®½·¿´ Ñ°»®¿¬±®
wîðïì Ѫ»®¸»¿¼ ܱ±® ݱ®°±®¿¬·±²ò Ѫ»®¸»¿¼ ܱ±®ô ̸»®³¿½±®»ô ÎØÈô ÎÍÈô Ú·®» Í»²¬·²»´ô ο°·¼Í´¿¬ ¿²¼ ¬¸» η¾¾±² ´±¹± ¿®» ®»¹·¬»®»¼ ¬®¿¼»³¿®µ ±º ¿²¼ ÝÜÈ · ¿ ¬®¿¼»³¿®µ ±º Ѫ»®¸»¿¼ ܱ±® ݱ®°±®¿¬·±²ò Õ²±½µ ú Ô±½µ · ¿ ®»¹·¬»®»¼ ¬®¿¼»³¿®µ ±º Õ»²²»¬¸ Ûò Ò¿½¸®»·²»®ò ß´´ ±¬¸»® ¬®¿¼»³¿®µ ¿®» °®±°»®¬§ ±º ¬¸»·® ®·¹¸¬º«´ ±©²»®ò ݱ²·¬»²¬ ©·¬¸ ±«® °±´·½§ ±º ½±²¬·²«·²¹ °®±¼«½¬ ·³°®±ª»³»²¬ô ©» ®»»®ª» ¬¸» ®·¹¸¬ ¬± ½¸¿²¹» °®±¼«½¬ °»½·º·½¿¬·±² ©·¬¸±«¬ ²±¬·½» ±® ±¾´·¹¿¬·±²ò Ýçððóðíé
Standard door Stormtite™ aP door
Hot CoLd
Stormtite™ AP Door System
indUStrY LeadinG CommerCiaL & indUStriaL SoLUtionS
627
MO
DE
L
Standard Features At a Glance
Max. standard width 30' (9144 mm)
Max. standard height 19' (8534 mm)
Curtain 24 gauge galvanized steel front24 gauge galvanized steel back
Slat profile Flat, insulated, type FIT-265
Insulation Foamed-in-place, CFC and HCFC-free polyurethane
R-value* 10.9 (1.91 W/Msq)
U-factor† 0.84
STC Rating Through Curtain 28; Installed System; 21
Flame Spread and Smoke Index
Class A or 1
Finish Gray, tan, brown or white
Hood 24 ga. galvanized steel
Wind load 20 psf
Standard mounting Face of wall
Operation Chain hoist
Standard springs 20,000 cycle
Advanced Perimeter Protection
Bottom weatherseal, interior and exterior EPDM triple-finned guide brush weatherseals, interior hood baffle, and lintel seal
Guides 3-angle structural steel; black powder coated
Bottom bar Black powder coated steel with vinyl weatherseal
Lock Chain keeper
Warranty 24-month limited on door or 3 year limited on door and operator system
Options
• Between-jamb mounting• Electric (RHX®, RSX®, RMX®) or crank operation• Bottom sensing edge• Sloping bottom bar• Stainless steel (22 gauge front/24 gauge back) or aluminum slats• PowderGuard™ Zinc or Weathered finishes available on curtain, steel bottom bar angles and guides• PowderGuard™ Premium powder coat paint finish in 197 standard colors, or color-matched to specification• Insulated vision lites uniformly spaced of 1” x 10” (25.4 mm x 254 mm) • High cycle counter balance with high usage package• High-wind load option• Cylinder lock• Special application doors: − Oversized doors − Combination doors (2 doors on a single head plate) − Pass doors* R-value is a measure of thermal efficiency. The higher the R-value the greater the insulating properties of the door. Overhead Door Corporation uses a calculated door curtain R-value for our insulated doors.
** U-value is a measure of the flow of heat through an insulating or building material: the lower the U-value, the better the insulating ability. U-value is the inverse of R-value.
Stormtite™ AP Advanced Performance Insulated Rolling Doors
MODEL 627
Stormtite™ AP delivers advanced thermal performance, climate control and security.The Stormtite™ AP Model 627 is engineered to supply advanced performance in industrial and general commercial applications where thermal performance, climate control and security are primary concerns.
The Solution for Demanding Application NeedsBacked by an industry leading 3 year door and operator system warranty, the Stormtite™ AP door system’s advanced performance answers the demand for more reliability, durability, security, flexibility and thermal efficiency. Ideal applications include the following:
• Industrial manufacturing facilities• Government facilities• Public facilities• Food and beverage distribution facilities • Climate controlled facilities• Healthcare facilities• Shipping and receiving docks
Advanced Performance in an Insulated Rolling Door SystemThis door system presents the most advanced thermal performance values published by any major US manufacturer of insulated rolling steel doors, with an R-value* of 10.9, U-value** of 0.09 and a tested installed U-factor† of 0.84. When compared to the International Energy Conservation Code (IECC) 2012 requirements, the Stormtite™ AP Model 627 far surpasses these. The superior construction of this rolling service door and the advanced design of the perimeter seals offer superior door protection against air leakage. The innovative EPDM triple-finned guide brush weatherseals (located on interior and exterior of guide), work in tandem with the hood baffle and bottom bar weather seals to reduce air leakage through the entire door system perimeter.
The sound performance of the Stormtite™ AP Model 627 furnishes a through curtain Sound Transmission Class (STC) rating of 28 and installed system rating of 21. The higher the STC rating the better the buffering is from the transmission of sound through and around the door. This insulated door system also includes a flame spread and smoke index of class A or 1, the highest rating possible and complies with National Fire Protection Association (NFPA), Underwriters Laboratories (UL) and International Building Code (IBC) requirements.
Stormtite™ Secures Against Elements and Forced EntryThe Stormtite™ AP Model 627 is constructed of interlocking slats with endlocks and/or windlocks. This design supplies
† Installed U-Factor - A tested value of actual energy loss - whether heat or cold - of an installed door, wall, or window assembly. The lower the number the lower the energy loss and therefore the better the thermal performance. U-factor will vary between 0.66 and 1.00 depending on finish and color selection. For best U-factor, choose finish and color with high solar reflectance (bright colors).
Stormtite™ AP Door Systems
MODEL 627
Stormtite™ AP delivers advanced thermal performance, climate control and security.
resistance against forced exterior entry and several interior lock options can supply additional security. The 627 delivers 20 psf (design pressure) wind load protection, which is equivalent to approximately 90 to 110 mph wind speed (comparable to hurricane force wind category 1 to 2). This model can be built to accommodate higher wind loading upon request.
Flexibility in OperationThis Stormtite™ AP door system comes with chain hoist operation standard; crank and motor operation options are also available. The varied options of operation and mounting (left or right handed) afford flexibility to meet the needs of the facility and application.
Many Options, Customized SolutionsThe Stormtite™ AP Model 627 is available with a number of options to meet individual application needs. The large insulated vision lite features thick dual-wall polycarbonate which affords advanced
insulation properties as well as maximum visibility and light transmittance. Slat options include a choice of steel (standard), stainless steel or aluminum. Finish options include a choice of 4 standard colors as well as the PowderGuard™ Zinc Premium powder coat finish in 197 standard colors or color-matched to specification. The PowderGuard™ Zinc and PowderGuard™ Weathered finishes are also available for the door curtain as well as bottom bar angles and guides.
Special application options include oversized doors, combination doors (2 doors on a single head plate), and pass doors. Ask your Overhead Door Distributor for more information about the special applications options.
For additional information, or special project requirements, consult your Overhead Door Distributor or the Overhead Door Architectural Design Manual.
Stormtite™ AP Model 627 insulated rolling service door installed at a manufacturing plant in Lewistown, Pennsylvania.
This uniquely designed rolling door slat measuring 1.4” in thickness,
provides advanced thermal performance and increased
durability.
This innovative triple-finned EPDM brush seal protects the interior and
exterior perimeter of the door system against the elements.
The Original, lnnovative Choice for Unequalled Quality and Service
Overhead Door Corporation pioneered the upward-acting door industry, inventing the first upward-acting door in 1921 and the first electric door operator in 1926. Today, we continue to be the industry leader through the strength of our product innovation, superior craftsmanship and outstanding customer support, underscoring a legacy of quality, expertise and integrity. That’s why design and construction professionals specify Overhead Door Corporation products more often than any other brand.
The Overhead Door Red Ribbon is a mark of quality that also reflects the pride we take in the people who support our products. Our family of over 400 Overhead Door Distributors across the country not only share our name and logo, but also our commitment to excellence. Your Overhead Door Distributor will work with you in a consultative role to ensure that product selections achieve your design and application requirements — in addition to offering expert installation, professional field service and ongoing maintenance. From project design and manufacturing to installation and service, the Overhead Door Red Ribbon is your guarantee of genuine quality and turnkey service excellence.
• Together with our distributors, we offer comprehensive technical information and resource materials to support your project, including:
• Architectural Design Manual – a comprehensive guide to selecting, specifying and detailing all commercial and industrial Overhead Door products can be found at www.OverheadDoor.com/ADM/base.html
• Operation & Maintenance Manual – detailed product information, customized for your project, to ensure reliable, long-life door system operation
• Custom application and technical assistance through ordering plants’ customer service and technical services respectively• Visit our Architect’s Corner at www.OverheadDoor.com
Today, Overhead Door Corporation – along with our Horton Automatics division, for automated pedestrian entrances – is recognized as the leading, single-source manufacturer of integrated door and operator systems for commercial, industrial and residential applications. With multiple manufacturing locations throughout the United States, a state-of-the-art TREQ (Testing, Reliability, Engineering, and Quality) Center for design and engineering, and a national network of authorized Overhead Door Distributors, our capabilities are leading-edge and our field service and technical support second to none. Built best and backed best, Overhead Door is the industry’s leading choice for quality that shows and lasts.
To talk with the Overhead Door Distributor nearest you, call 1-800-929-DOOR.
overhead door Corporation
2501 S. State Hwy. 121 Bus., Suite 200Lewisville, Texas 750671-800-929-DOORwww.OverheadDoor.com
The Overhead Door Corporation family of quality commercial and industrial products includes:
A part of Sanwa Holdings Corporation
indUStrY LeadinG CommerCiaL & indUStriaL SoLUtionS
©2013 Overhead Door Corporation. Overhead Door, Thermacore, RHX, RSX, RMX and the Ribbon logo are registered trademarks of and Stormtite is a trademark of Overhead Door Corporation. All other trademarks are property of their rightful owners. Consistent with our policy of continuing product improvement, we reserve the right to change product specifications without notice or obligation. C900-982
Advanced Rolling Steel Door RapidSlat®
Thermacore® Sectional Doors Rolling & Side FoldingSecurity Grilles & Closures
Rolling Service Doors Commercial Operators
PRODUCT SPECIFICATIONS: 1-3/4" Thick steel doors shall be as manufactured by Ceco Door Products.Doors shall conform to the Steel Door Institute guide specification, ANSIA250.8; see chart below for performance classifications. LEGION doors are made full-flush or (optional) seamless style. Face sheets are commercial quality cold rolled steel conforming to ASTM A1008...or(optional) hot-dipped galvanized steel conforming to ASTM A924 and A653 --see chart below. Legion full-flush doors have mechanical ly interlocked, hemmed, hairline seams on vertical edges and have no visible seams on faces. Doors specified"seamless" have no visible seams on faces or vertical edges (S.D.I. Model 2).Aone piece, polystyrene slab, conforming to ASTM C578 TYPE 1, is bonded to the inside of both face sheets with a waterproof contact adhesive. The top andbottom door edges are closed with 16 gage steel channels welded to bothface sheets. Hardware Provisions: Hinge preparations are handed. Hinge edges are mortised for 4-1/2" or 5" high, standard and heavy weight hinges (specifywhich). 7 gage steel hinge reinforcements are welded inside the door edgeand are drilled and tapped for fasteners in accordance with ANSI A156.7. Thelock edge has a standard bevel (1:16) and is prepared for Gov. series 86, 160/161, or 90 locks in accordance with ANSI A115 (specify which). Optionalcloser reinforcement is a 14 gage steel channel. Paint: 1-3/4" steel doors shall be provided with one coat of oven-cured neutral color primer paint. Primer coat shall conform with ANSI A250.10. The primer coat is a preparatory base for necessary finish painting. "Colorstyle" finish coatis also available from a selection of standard colors (optional). Colorstyle finishis electrostatically applied, oven-cured urethane enamel and shallconform to ANSI A250.3 . For accurate color selectors ask for a Ceco Colorstyle chart.
Eagle River Wastewater Treatment FacilityRehabilitation Project
Item Quantity Units Unit Cost TotalMaterials
Windows"A" Option 1 8 EA $554 $4,430"A" Option 2 8 EA $557 $4,457"B" Option 1 7 EA $1,015 $7,103"B" Option 2 7 EA $648 $4,539
Door OptionsThermacore Model 592 1 Material + Labor $8,100 $8,100Stormtyte AP Model 627 1 Material + Labor $18,190 $18,190
Ceco man door only 1 EA $2,451 $2,451Ceco man door with frame 1 EA $2,793 $2,793
Material Sub-Total $46,819Labor
Window Installation"A" Window 16 Man Hrs $150 $2,400"B" Window 14 Man Hrs $150 $2,100
Door InstallationMan door only 3 Man Hrs $150 $450
Man door with frame 6 Man Hrs $150 $900
Labor Sub-Total $5,850TOTAL INSTALL $52,669
Total With 25% Contingency $65,837
Window and Door Options