grit finish

Download Grit finish

Post on 13-Sep-2014

348 views

Category:

Education

2 download

Embed Size (px)

DESCRIPTION

 

TRANSCRIPT

Slide 1

Surface finishPRESENTED BY :BILAL KHANBHURA UMAIRIQBAL ZAFARJYOTI YADAVMOHD. RAGHIBOMID PAKSIMATABISH IFTEKHAR

Presentation on INTRODUCTION NECESSITY TECHNIQUES STROKSSTRIPLINGTEXTURESCIOGRAPHY CONCLUSION INDEXDEFINITION- This plasteris a textured plaster done in two layers in panels with grooves as per pattern with different type of stone chipping 10 mm. nominal size. Min thickness is 30mm.

COMPOSITION ( 1 cement : 0.5 coarse sand : 2 stone chipping (10 MM nominal size. ) Stones- Dholpur & Kotastone.

TYPES OF GRIT PLASTER- Depend upon types of stone chips.PROPERTIES-

MOISTURE RESISTANCE - High DURABILITY- High durabilityTERMITE RESISTANT- GoodENVIRONMENTAL HAZARDS- Good FINISHING RESULTS- Good Textured Finish

Grit finish plaster

APPLICATIONS-

PROCEDURE OF APPLICATION-

1st LAYER- 12 mm cement plaster in 1: 4 Ratio.2nd LAYER- 1:0.5: 2 ( 1 cement : 0.5 coarse sand : 2 stone chipping (10 MM nominal size. ) Stones- Dholpur & Kotastone.

USES-

ARCHITECTURAL- Exterior finish of buildings.Residential, Commercial building,Intuitional buildings

NON-ARCHITECTURAL-Landscape Elements Like feature wall boundary wall, Pathways.BEST SUITED FOR- Public Buildings.

4

RATES -

Grit Plaster -270 RS./ sqm.Groove -20.50Rs/Run m.

ADVANTAGES- Requires Low maintenance. acoustical absorption

DISADVANTAGES- It cant be use in interior because of texture finish.

DEFINITION- Brickworkismasonryproduced by abricklayer, usingbrickstile andmortar. Typically, rows of bricks in courses are laid one on top of another.

COMPOSITION Brick tile230mmx115mmx40 mm ) Cement mortar (1:3-1:5)

PATTERN IN BRICK TILE English bond, Flemish Bond , other Patterns.

PROPERTIES-

MOISTURE RESISTANCE - Good DURABILITY- High durabilityTERMITE RESISTANT- GoodENVIRONMENTAL HAZARDS- Moderate ResistantFINISHING RESULTS- Good reddish brown Texture Finish

BRICK tile cladding 115 230 406

APPLICATIONS-

PROCEDURE OF APPLICATION-

1st LAYER- 10 mm base cement plaster in 1: 3-1:4 Ratio.2nd LAYER-Queen closer of Brick tile (230mmx57.5mmx40mm)USES-

ARCHITECTURAL- Exterior finish of buildings.Residential, Commercial building,Intuitional buildings.

NON-ARCHITECTURAL-Landscape Elements Like feature wall boundary wall, Pathways.BEST SUITED FOR- Public Buildings in plain areas.

57.5 230 40

RATES -

Brick tile cladding -320 RS./ sqm..

ADVANTAGES- Requires Low maintenance. acoustical absorption

DISADVANTAGES- It is not good in interior because of texture finish.

8DEFINITION- Stone claddingis a thin layer ofstoneorsimulated stoneapplied to a surface of building.

TYPES OF STONES

Stone cladding9PROPERTIES-

MOISTURE RESISTANCE - Good DURABILITY- High durabilityTERMITE RESISTANT- HighENVIRONMENTAL HAZARDS- High ResistantFINISHING RESULTS- Smooth & textured as/ stone

APPLICATIONS-

PROCEDURE OF APPLICATION-

1st LAYER- 10 mm base cement plaster in 1: 3-1:4 Ratio.2nd LAYER- Stone panel as/ Spcs.USES-

ARCHITECTURAL- Exterior & interior finish of buildings.Residential, Commercial building,Instuitional buildings.

NON-ARCHITECTURAL-Landscape Elements Like feature wall boundary wall, bird bath Pathways & fire place.BEST SUITED FOR- interior & exterior both

RATES -

Rough stone -320 RS./ sqm.Local stone - Polished stone -

ADVANTAGES- Requires Low maintenance. Easy to clean. Good appearance. Cheap in hilly areas.

DISADVANTAGES- costly in Plain areas ,

13