hallway - hulsta uk info-service · hallway collection. 3 hallway collection diele e 5.2018...

www.huelsta.com

5/18Type list

LIVING

E

Hallway

2DIELEE 5.2018

Contents Page

Range description 2

MULTI-VARIS 4-21

NEO 22-31

SCOPIA 32-43

Switch options for lamps 45-47

Special articles, wall composition 48-49

Concept

Chests of drawers, clothes panels, mirrors, cupboards, shoe cupboards – there are now specific collections of units to match nearly every hülsta living room range which convey the corresponding atmosphere to the entrance hall. The most individual wishes can now be met by means of the wide choice of surfaces and materials. It is also possible to combine these versions and achieve some most interesting effects.

Functions

The Hallway collection meets all the consumer’s functional requirements. Besides storage space for typical items of clothing (coats, hats, shoes, umbrellas), there is room for the vacuum cleaner, correspondence, the te-lephone and other clothing items. Create some really functional units even where space is at a premium with our novel and ingenious clothes units. A number of lamp systems as well as individual mirrors matching the various ranges round off the collection.

Versions

Besides the wide variety offered by the different products, the various surfaces available offer you some genuine additional choices. Choose from genuine wood veneer, lacquer and high-gloss lacquer surfaces.

HALLWAY COLLECTION

3

HALLWAY COLLECTION

DIELE E 5.2018

Possible arrangements

4DIELE: MULTI-VARISE 5.2018

The comprehensive MULTI-VARIS ancillary unit range is most impressive with its intrica-te yet graceful appearance and an enormous selection of high-quality wood, lacquer and high-gloss versions allowing combinations with units from nearly all of hülsta’s ranges. This range is especially convincing in combination with the modern, innovative MULTI-FORMA II wardrobe system. The enormous choice of units can be adapted individually to a variety of different furnishing styles by using units including a mixture of surface versions and materials, and highly refined and expressive single units can be created by using high-gloss carcases and fronts in combination with a number of unique design features. The range is neatly rounded off by a variety of handle and plinth versions and some specially selected accessories.

MULTI-VARIS

• Many consoles and chests; in four heights, nine widths and one depth, dressing chests with mirror, corner shelves

• Consoles, chests and dressing chests optionally:- with different plinth versions: plinth adjusters (standard), plinth slat, legs or plinth legs;

many consoles and chests can also be used as wall units- with wooden cover shelf or rear-lacquered glass cover shelf- with different handles in a variety of versions

• Ancillary tables and bed shelf in special lacquer versions

• hülsta-SoftFlow: Drawers of ancillary units on hidden bearings incl. auto pull-in feature with cushioning bracket as fully pull-out units

• hülsta-MagicClose: All wooden hinge-doors with door cushioning system

Product information

Range introduction Link to the assembly / user instruction movies

Contents Page

Range introduction, lists of versions 4-5

Plinth versions, wall bracket 6

Handle versions 8-9

Notes on total height, 2 Raster consoles 11

3 Raster consoles/chests 12-13

4 Raster chests 14-15

5 Raster chests 16-17

Corner unit for consoles and chests, dressing chests 18

Lamps, Magic-Tronic, remote control unit 19

Ancillary tables 20

5

MULTI-VARISHALLWAY

COLLECTION

DIELE: MULTI-VARIS E 5.2018

1

2

Important notes: Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units. That is why wall mounting should only be carried out by properly trained and qualified fitters. hülsta supplies materials for mounting units on walls for nearly all the units and which should be used for safety and for constructional reasons. The assembly materials supplied by hülsta (plugs, screws) are only suitable for fitting components on to concrete in firmness class C12/15.For other materials (please see separate materials table in the wall composition chapter) we provide you with an assembly mortar set as an extra order. Please note that this assembly mortar set is also only suitable for the materials listed in the materials table. If walls are made up of other materials (e.g. plastered or lighter wall materials), one should use another method of mounting better suited to the load on site. Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over – especially when alternative mounting materials acquired on site have been used.For the reasons stated above it is absolutely essential to enquire about the composition of any walls before signing any contracts.

Wall units in general

34

Labelling in type list drawings / assembly notes for wall unitsThe majority of units have two wall mounting points (= number of base plates), if these are to be fitted as wall units. This is not explicitly mentioned in the type list. If a different number of wall mounting points (= base plates) is required, this is marked in the drawings in the type list with numbers in black boxes. Please be sure to note here the information and notes in the “Wall composition” chapter!

Notes on delivery:The majority of the units are delivered standard as fully connected units (glued) so that the carcase cannot be disassembled. There are however some exceptions to this rule:

Some carcases are delivered as complete units but can be disassembled into individual sections in the final customer’s home. These types are marked with a 1 in the type list.

Some carcases are delivered in individual sections because of their size. These types are marked with a 2 in the type list.

The fronts with the number 2 are delivered separately and can therefore always be (dis-) assembled.

Labelling in type list drawings / assembly notes for wall units Notes on delivery

Range introduction

Important notes:

With MULTI-VARIS it is possible to order the carcase, front and cover shelf in different versions. In this case, please state the model number for the carcase, front and cover shelf separately. Please state this clearly in the order! If versions from different price groups are exchanged, the higher price group is always charged.

• Standard cover shelf version: - for carcase version of wood: with a 1.1 cm thick wooden cover shelf in the matching wood version - for carcase version of lacquer or high-gloss: with a 0.8 cm thick rear- lacquered glass cover shelf in the matching lacquer/high-gloss version

• Standard plinth version: 1.8 cm high plinth adjusters• Standard handle version: handle 110 in matt chrome• Ancillary unit interior carcase in standard white lacquer • Drawer frames in standard grey • Open compartment only available in wood version, please state the required version

clearly in the order!• 160 cm wide drawers with full-width front not available in the high-gloss versions

Lacq

uer

List of versions ancillary unitsModel no.

648640 644 641

IIII

Versions

High

-glo

ssVe

neer

862 860 863 861

Pure white lacquerWhite lacquerSand lacquerGrey lacquer

High-gloss pure whiteHigh-gloss whiteHigh-gloss sandHigh-gloss grey

Natural oakCore walnut

685 680

IIIIIIII

IIII

List of versions ancillary tables and bed shelf

Quartz lacquerAnthracite lacquerOxide lacquerBronze lacquerCream lacquer

668669 670 671 646

IIIII

Versions

Ancillary tables and bed shelf of lacquered metal

Price group

Price groupModel no.

Lacq

uer

6

MULTI-VARIS

DIELE: MULTI-VARISE 5.2018

Plinth versionsMULTI-VARIS offers a number of different plinth versions. If no details are given in the order, standard 1.8 cm high plinth adjusters are supplied. These are included in the price of the individual units. Alternative plinth versions can be ordered at a surcharge. Please state clearly in the order!

Plinth versions

Plinth adjuster – 1.8 cm high (standard plinth)

Standard (without surcharge)

Plinth slat – 2.3 cm high

Legs – 2.5 cm highoptionally matt chrome or high-gloss chrome

Plinth legs – 10.0 cm highoptionally aluminium coloured or high-gloss chrome

Matt chrome

High-gloss chrome

High-gloss chrome

aluminium coloured

black

Surcharge:

Surcharge:

Surcharge:

Surcharge:

Surcharge:

2011

-

2041

-

2051

-

2031

-

2021

-

Wall bracketIf MULTI-VARIS consoles and chests are to be included as wall units, a wall bracket must be ordered. Please state clearly in the order! 5 Raster chests and dressing chests can not be fitted as wall units.

Wall bracket

Wall bracket

2061

-

7

MULTI-VARISHALLWAY

COLLECTION



8

MULTI-VARIS


Important note: Drawers from 100 cm width with 2 handles 115 or 114!


Important note: 160 cm wide drawers with 2 handles 130 or 129!


Important note: Drawers from 100 cm width with 2 handle knobs 001 or 002!


without surcharge

002

without surcharge

146

without surcharge

001

without surcharge

147

Important note: 160 cm wide drawers with 2 handles 112!

Important note: 160 cm wide drawers with 2 handles 111!

15.0 cm wide 18.8 cm wide

Handle versionsMULTI-VARIS provides a number of different handle versions. If no details are given in the order, a standard handle 110 is supplied. This is included in the price of the individual units. Alternative handle versions can be ordered with or without a surcharge. Please state clearly in the order!One handle slat is required for each front section (for types 108, 107 and 141). To calculate the number of handles or knobs per front section, please see the sketches on the following pages and the notes on the handles illustrated below!

Handle versions

Handle 110/109optionally in matt chrome (handle 110; standard handle) or high-gloss chrome (handle 109)

Handle 113/126optionally in matt chrome (handle 113) or high-gloss chrome (handle 126) - matching the MULTI-FORMA II handle 013 or 026

Matt chrome

High-gloss chrome

Matt chrome

High-gloss chrome

without surcharge

Standard handle

110

without surcharge

109

without surcharge

126

without surcharge

113

without surcharge

130

24.0 cm wide matching version

24.9 cm wide

Handle 111matt chrome - matching the MULTI- FORMA II handle 011

Handle 112handle connection in matt chrome, handle section in wood/lacquer version (not available in high-gloss versions) - matching the MULTI-FORMA II handle 012

Wood/lacquer version, matt

chrome

without surcharge

111

without surcharge

112


6.8 cm wide

Matt chrome

High-gloss chrome

Matt chrome

High-gloss chrome

without surcharge

115

without surcharge

114

without surcharge

129


25.5 cm wide

Matt chrome

2.5 cm long, Ø 1.1 cm 6.3 cm wide

Handle knob 001/002optionally in matt chrome (handle knob 002) or high-gloss chrome (handle knob 001) - matching the MULTI-FORMA II intermediate unit handle knob

Handle 146/147optionally in matt chrome (handle 146) or high-gloss chrome (handle 147) - matching the MULTI-FORMA II handle 046/047 or 048/049Matt chrome

High-gloss chrome

Matt chrome

High-gloss chrome

9

MULTI-VARISHALLWAY

COLLECTION




5.6 cm wide

Important note: All drawers with 1 handle slat 108 or 107!

Important note: Drawers from 100 cm width with 2 handle sections of the handle slat!

for all widths

Handle slat 141handle slat bronzed; handle section, 9.2 cm wide, optionally in natural oak or core walnut

for all widths in natural oak or core walnut

Aluminium colour

High-gloss chrome

without surcharge

108

Surcharge per handle slat:

107

-

Core walnut

Natural oak


141

-


141

-



Handle versionsMULTI-VARIS provides a number of different handle versions. If no details are given in the order, a standard handle 110 is supplied. This is included in the price of the individual units. Alternative handle versions can be ordered with or without a surcharge. Please state clearly in the order!One handle slat is required for each front section (for types 108, 107 and 141). To calculate the number of handles or knobs per front section, please see the sketches on the following pages and the notes on the handles illustrated below!

Handle 1511/1512optionally in high-gloss chrome (handle 1511) or antique silver (handle 1512) - matching the short FENA handle

17.8 cm wide8.6 cm wide High-gloss chrome

without surcharge

1511

Handle 1513/1514optionally in high-gloss chrome (handle 1513) or antique silver (handle 1514) - matching the long FENA handle

without surcharge

1512Antique silver

without surcharge

1513High-gloss chrome

without surcharge

1514Antique silver

Handle slat 108/107optionally aluminium coloured (handle 108) or high-gloss chrome (handle 107) - matching the METIS plus handle 013 or 026

Handle versions

Matt chrome

High-gloss chrome

without surcharge

157

without surcharge

158

10

MULTI-VARIS



11

MULTI-VARISHALLWAY

COLLECTION


50 cm wide2 Raster consolesMinimum/maximum total height: 39.2/49.5 cm(The total height varies ac-cording to the cover shelf and plinth version, see above);40.1 cm deep

Please be sure to observe the important notes on the consoles/chests on the following double page con-cerning the heights, plinths, handles, cover shelves and exchanging versions!

Max. load when fitted as a wall unit: 30 kg

2 Raster consolesWidth:

2 drawers 2 drawers2 drawers

open compartment; 1 draweropen compartment; 1 drawer

Accessories: see page 19!

Notes on the total height

Notes on the total heightWith MULTI-VARIS you can choose from a number of different plinth versions and cover shelves (see page 5). This means that the total height of the units varies.

Please note the overview below on this subject.

Calculating the total height:

Carcase height:

38.4 76

.8

57.6

96.0

2 Raster 5 Raster4 Raster3 Raster

Total height of the unit

Cover shelf height: 0.8 cm glass cover shelf or 1.1 cm wooden cover shelf

Plinth height: 1.8 cm plinth adjuster (standard) or2.3 cm plinth slat or2.5 cm legs or10.0 cm plinth legs0.0 cm when used as wall unit (possible up to max. 4 Raster height)

Price gr.III

Price gr.III

5025

--

5028

--

5328

--

80 cm wide

--

5326

--

5026

60 cm wide

12

MULTI-VARIS


80 cm wide 100 cm wide 120 cm wide

L

3 drawers

1 door

3 Raster consoles/chestsMinimum/maximum total height: 58.4/68.7 cm(The total height varies ac-cording to the cover shelf and plinth version, see page 11);40.1 cm deep

Interior fittings:1 fitted wooden shelf is included behind door(s).

Max. load of glass cover shelf: 20 kg

Max. load per unit when fitted as a wall unit: 30 kg

Important notes:Standard versions(if not otherwise stated in the order):Plinth:1.8 cm high plinth adjusters Cover shelf:Of matching wood for wood versions; of matching rear-lacquered glass for lacquer/high-gloss versions Handle:Handle 110 in matt chrome

Changing plinth, handle and cover shelf:With MULTI-VARIS you can choose from a multitude of plinth versions, cover shelves and handles – contrary to the standard versions described above. These are charged partly without and partly with a surcharge. The number of handles varies for 100 and 120 cm wide drawers. The standard handle 110 shows the number of handles per front in the sketches.

Changing versions:In MULTI-VARIS colour com-binations within individual units are possible. In this case please state the model number clearly and separately in the order! If versions from different price groups are exchanged, the higher price group is always charged.

Please be sure to observe the information and notes on the plinth versions, cover shelves, handles, number of handles and surface versions on the introductory pages!

3 Raster consoles/chests

L

1 door

open compartment; 2 drawers


2 doors


1 door; 3 drawers

2 doors


L50 50

L/R = Door hinge left/right

3 drawers3 drawers 3 drawers 3 drawers

50 cm wide 60 cm wideWidth:

Price gr.III

Price gr.III

Price gr.III

Price gr.III

5035

--

5038

--

50310

--

50312

--

51310

--

51312

--

5338

--

53310

--

53312

--

51352 R51351 L

--

51362 R51361 L

--

523102523101

--

as illustr.v. versa (R)

4

--

5036

--

5336

13

MULTI-VARISHALLWAY

COLLECTION


150 cm wide 160 cm wide140 cm wide 180 cm wide

60 80

1 door; 3 drawers

60 80

open compartment; 2 drawers; 1 door

50 50

2 doors; 3 drawers

50

80 80

6 drawers3 drawers with split drawer frames; drawers not available

in high-gloss versions!

80 80

4 drawers; lower drawers with split drawer frames

not available in high-gloss versions!

60 100

1 door; 3 drawers

80 80


80 80

open compartment; 3 drawers; lower drawers with split drawer frames


60 100


50 80

2 doors; 3 drawers

50

60 120

1 door; 3 drawers

60 120


L L L

L L L


503163

--

503164

--

503166

--

52315

--

52318

--

523142523141

--

523162523161

--

523182523181

--

553142553141

--

553162553161

--

53316425331641

--

as illustr.v. versa 5331662

5331661

--


553181

--







4 4 4

4 4 4

6 6

44444

2 2 2

2 2 2

2 2

2 2 2 2 2

Assembly notes for wall units:Please be sure to note here the information and notes in the “Wall composition” chapter!

34Accessories: see page 19!

Notes on delivery:Please see here the information on page 5! 2

1

14

MULTI-VARIS


1 door

4 Raster chestsMinimum/maximum total height: 77.6/87.9 cm(The total height varies ac- cording to the cover shelf and plinth version, see page 11);40.1 cm deep

Interior fittings:1 fitted wooden shelf is included behind door(s).


Max. load per unit when fitted as a wall unit: 30 kg





4 Raster chests

4 drawers

1 door

4 drawers4 drawers



2 doors

4 drawers

1 door; 4 drawers


2 doors

4 drawers


50 50

L L


80 cm wide 100 cm wide 120 cm wide50 cm wide 60 cm wideWidth:

Price gr.III

Price gr.III

Price gr.III

Price gr.III

5045

--

5048

--

50410

--

50412

--

51410

--

51412

--

5348

--

53410

--

53412

--

524102524101

--

51452 R51451 L

--

51462 R51461 L

--


L

4

--

5346

--

5046

15

MULTI-VARISHALLWAY

COLLECTION


1 door; 4 drawers

60 80

50 50 5050 80 50

60 80


2 doors; 4 drawers

8 drawers

80 80

4 drawers with split drawer frames; drawers not available

in high-gloss versions!

5 drawers; lower drawers with split drawer frames


80 80

1 door; 4 drawers

60 100


8080

open compartment; 4 drawers; lower drawers with split drawer frames


80 80


60 100

2 doors; 4 drawers

60120

1 door; 4 drawers


60 120L L L

L


150 cm wide 160 cm wide140 cm wide 180 cm wide

504164

--

504165

--

504168

--

52415

--

52418

--

524142524141

--

524162524161

--

524182524181

--

554142554141

--

554162554161

--

53416525341651

--


5341681

--


554181

--







L L

4 4 4

4 4 4

6 6

44444

2 2 2

2 2 2

2 2

2 2 2 2 2




1

16

MULTI-VARIS


5 Raster chestsMinimum/maximum total height: 96.8/107.1 cm(The total height varies ac-cording to the cover shelf and plinth version, see page 11);40.1 cm deep

Interior fittings:Fitted wooden shelves are included behind door(s).


5 Raster chests cannot be used as wall units.





5 Raster chests

1 door 1 door

5 drawers5 drawers



2 doors

5 drawers

1 drawer; 2 doors

1 door; 5 drawers

open compartment; 2 doors


2 doors

5 drawers


L L

L50 50


80 cm wide 100 cm wide50 cm wide 60 cm wideWidth: 120 cm wide

Price gr.III

Price gr.III

Price gr.III

Price gr.III

5055

--

5058

--

50510

--

50512

--

51510

--

515103

--

51512

--

5358

--

53510

--

545103

--

53512

--

525102525101

--

51552 R51551 L

--

51562 R51561 L

--


5 drawers

4

--

5056

--

5356

17

MULTI-VARISHALLWAY

COLLECTION


1 drawer; 2 doors

open compartment; 2 doors

1 door; 5 drawers


2 doors; 5 drawers

1 door; 5 drawers

10 drawers


6 drawers; lower drawers with split drawer frames not available in high- gloss versions!

open compartment; 5 drawers; lower drawers with split drawer frames not available in high- gloss versions!


2 doors; 5 drawers

1 door; 5 drawers


LL L

L LL

60 80

60 80

60 100

60 100

8080

60120

50 50 5050 80 50

60 1208080

8080

5 drawers with split drawer frames;

drawers not available in high-gloss versions!

8080


150 cm wide 160 cm wide140 cm wide 180 cm wide120 cm wide

505165

--

505166

--

5051610

--

515123

--

52515

--

52518

--

545123

--

525142525141

--

525162525161

--

525182525181

--

555142555141

--

555162555161

--

53516625351661

--


53516101

--


555181

--







4 4 4

4 4

6 6

44444

4

2 2 2

2 2 2

2 2 2

2 2 2 2 2 2




1

18

MULTI-VARIS


Price gr.III

Dressing chestsMinimum/maximum total height incl. mirror: 133.4/143.7 cm; Height of dressing chest: 77.6/87.9 cm (The total height varies ac-cording to the cover shelf and plinth version, see page 11); Depth incl. mirror: 40.6 cm Depth of dressing chest: 40.1 cm

Interior fittings:1 fitted wooden shelf is included behind door(s).The centre storage shelf is always in the same version as the cover shelf.Max. load of glass cover shelf: 20 kg.Dressing chests cannot be used as wall units.

Please be sure to observe the important notes for the chests on the previous dou-ble page on heights, plinths, handles, cover shelves and exchanging versions!

1 mirror, 1 door left and right, 1 storage shelf in the middle

1 mirror, 1 door left, 4 drawers right, 1 storage shelf in the middle

1 mirror, 4 drawers left and right, 1 storage shelf in the middle

5050

Dressing chests

6050506050

5060

160 cm wideWidth:

56162

--

56168

--

561652561651

--

as illustr.v. versa

222

Corner units for consoles and chestsCorner unit incl. vertical panelIf MULTI-VARIS consoles and chests are planned round cor-ners, it is possible to fit corner shelves incl. vertical panels (non accessible corner). Only consoles and chests of the same height can be planned round corners.

The corner shelves are supplied standard in the same version as the cover shelves of the adjacent consoles and chests. See here also the information on the introductory pages.

48.5 x 48.5 cm48.5 x 48.5 cm

Corner shelf incl. vertical panel for 3 Raster high consoles/chests

Corner shelf incl. vertical panel for 5 Raster high chests

Corner shelf incl. vertical panel for 2 Raster high consoles

--

572

--

573

--

574

--

575

48.5 x 48.5 cm48.5 x 48.5 cm

Corner shelf incl. vertical panel for 4 Raster high chests

Price gr.III

Price gr.III


1

19

MULTI-VARISHALLWAY

COLLECTION


Lamps

LED inside drawer lampsConsoles with drawers can be fitted with optional LED inside drawer lamps (powered by standard AAA 1.5 V batte-ries included – rechargeable batteries not possible; with automatic on/off switch).Please state exactly in your order which drawer is to be fitted with LED inside drawer lamps.

This type of luminaire is excepted from obligatory labelling in accordance with EU-VO 874/2012 guidelines (Reason: battery-operated and/or < 30 Lumen).

LED light strip for open compartments of consoles/chestsStandard switch with an external footswitch; alternatively also available with a Magic-Tronic or remote control unit (at a surcharge, see below).

This luminaire contains built-in LED lamps of the energy classes A++ to A.The lamps cannot be changed in the luminaire. 12 V; 1.7-4.8 W

for 80 cm width

501

-

for 100 cm width

502

-

for 120 cm width

503

-

Surcharge for LED inside drawer lamps per drawer:

-

-

500

for 60 cm width

The lamps are normally operated by an external footswitch. As an alternative we can also provide a Magic-Tronic switch, which is charged extra. By “stroking” the outer or top side of the unit at the same level as the invisible integrated sensor it is possible to switch all the lamps on and off (“Stroking method”). As an alternative the position of the hidden sensor can also be marked with a small metal plate on the furniture unit (“Marking method”). Lamps with a maximum power of 200 W can be operated by a Magic-Tronic unit (230 V). The footswitch is omitted when a Magic-Tronic unit is included.

Please be sure to observe the information and notes regarding the assembly position!

Magic-Tronic

-

7617

-

2016

-

2017

The lamps are normally operated by an external footswitch. A 4-channel remote control unit (= transmitter), which is charged extra, is also available as an alternative. Several lamps (up to a total load of a maximum 30 W per transformer and receiver) can be operated with each of the 4 channels. All 4 channels can be dimmed separately at the push of a button. It is also possible to switch all channels on and off simultaneously with the “all on” or “all off” buttons. Up to 4 transmitters can operate as many receivers as required. Transmitters and receivers must be ordered separately. The footswitch is omitted when the remote control unit is used.

Remote control

Price per transmitter Price per receiver

2.9 W1.7 W 3.9 W 4.8 W

20

MULTI-VARIS


Ancillary table

42.5 x 42.5 x 40 50 x 43.5 x 41

52.1 x 51.5 x 32 20.3 x 13.3 x 32

Ancillary tables, bed shelfAncillary tables, bed shelfAncillary tables and bed shelf of metal; only available in one of the special lacquer versions (see list of versions)

Height x Width x Depth

Height x Width x Depth

BB 01Ancillary tableBB 02

Ancillary tableBB 03

Bed shelfBB 04

-

50

-

51

-

52

-

53

21

MULTI-VARISHALLWAY

COLLECTION


Notes

22DIELE: NEO

NEO

E 5.2018

NEO is a hallway range which is as oriented as consistently as no other towards the living room situation, lifestyle, personal taste and individual requirements with regard to comfort, practical features and storage space. NEO is for people who you simply can‘t categorise: individual and representative. Single units in various heights can be combined at will with clothes panels and wall units. Accessories round off the collection.

• Various single units in 2 heights• Clothes mirror• Various clothes panels• Wall units• Accessories

Link to the assembly / user instruction movies

Optional knobs for fronts

141145150146147148149

All fronts are delivered standard without knobs (hülsta-Push-to-open). It is however possible to fit fronts with knobs (without surcharge; exception: knobs are not possible on all-glass fronts or fronts with glass insets). One knob is fitted on each front of drawers and flaps, two knobs are fitted from a width of 105.6 cm. The hülsta-Push-to-open device is not fitted when optional knobs are included. If drawers are fitted with knobs, these are supplied with hülsta-SoftFlow on hidden roller bearings as fully pullout units, with automatic cushioning device. Please state the required version clearly in the order!

Knob in stainless steel look Knob in wood/lacquer version, stainless steel look or high-gloss chrome

Knob in wood version or stainless steel look

White lacquerGrey lacquerSilk grey lacquerNatural oakCore walnutStainless steel lookHigh-gloss chrome

156157158

Natural oakCore walnutStainless steel look

113Stainless steel look

045046663051053048049614

Lists of versionsModel no.

I IIIIIIIIIIII

Price group

Model no. Price group

White lacquerGrey lacquerSilk grey lacquerNatural oakCore walnut

I IIIIII

045046663051053

* The inner carcase for high-gloss lacquer versions is in matt lacquer in the matching colour.

White lacquerGrey lacquerSilk grey lacquerNatural oakCore walnutHigh-gloss white lacquer *High-gloss grey lacquer *High-gloss silk grey lacquer *

Clothes panels, cover shelves, open compartments (inside), wall shelves

Carcase, fronts, frames of open compartments

NEWNEW

NEW

NEW

23

HALLWAY COLLECTION

DIELE: NEO

NEO

E 5.2018

Changing versions:In NEO colour combinations within individual units are possible. In this case please state the model number clearly and separately in the order! If versions from different price groups are exchanged, the higher price group is always charged.

Glass cover shelves:Glass cover shelves optionally rear-lacquered in white, grey or silk grey. When ordering rear-lacquered glass cover shelves please be sure to state the desired version!

Interior fittings:Fitted wooden shelves are included behind wooden and mirror doors at 2 Raster intervals.

Drawer frames in standard grey

Important notes: Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units. That is why wall mounting should only be carried out by properly trained and qualified fitters. hülsta supplies materials for mounting units on walls for nearly all the units and which should be used for safety and for constructional reasons. The assembly materials supplied by hülsta (plugs, screws) are only suitable for fitting components on to concrete in firmness class C12/15.For other materials (please see separate materials table in the wall composition chapter) we provide you with an assembly mortar set as an extra order. Please note that this assembly mortar set is also only suitable for the materials listed in the ma-terials table. If walls are made up of other materials (e.g. plastered or lighter wall materials), one should use another method of mounting better suited to the load on site. Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over – especially when alternative mounting materials acquired on site have been used.For the reasons stated above it is absolutely essential to enquire about the composition of any walls before signing any contracts.

34


Labelling in type list drawings / assembly notes for wall units

Combinations of floor and wall units:If floor and wall units are combined within an arrangement, there must not be any skirting boards in the room near the floor units, otherwise they must be removed.

Max. load: Max. load of wooden shelves (up to 70.4 cm width) as well as drawers: 25 kgMax. load of wooden shelves (from 70.4 cm width): 15 kgMaximum load of cover shelves: 35 kg per metre length for floor units.Please also note any maximum loads which may be stated in the type list for the individual units!

hülsta-Push-to-open/hülsta-SoftFlow:Drawers and flaps with hülsta Push-to-open. All drawers on hidden bearings as fully pull-out units. If drawers are fitted with knobs, these are supplied with hülsta SoftFlow on hidden roller bearings as fully pull-out units with automatic cushioned closing device.

Important notes

Notes on delivery:The majority of the units are delivered standard as fully connected units (glued) so that the carcase cannot be disassembled. There are however some excep-tions to this rule:




1

2

Notes on delivery

Wall units

For 1 and 2 Raster wall units the maximum load per unit of 15 kg per metre must not be exceeded for reasons of stability!

Max. load 15 kg per metre:52.8 cm width: 7.5 kg70.4 cm width: 10.0 kg105.6 cm width: 15.0 kg140.8 cm width: 20.0 kg176.0 cm width: 25.0 kg

For each project please remember to leave a 2.0 cm gap at the top to be able to mount units.

Wall fitting

24DIELE: NEO

NEO

E 5.2018

As an alternative to planning an individual unit from the complete range there is the possibility of choosing from specially suggested combinations. This eases planning. Incorporating accessories can enhance the suggested combinations. These are charged extra.

Suggested combinations21

1,2

211,2

158,4

211,2

211,2

211,2

Price gr.III

as illustr.v. versa

Price gr.III

Price gr.III

Price gr.III

Price gr.III

Price gr.III

as illustr.v. versa

as illustr.v. versa

as illustr.v. versa

as illustr.v. versa

as illustr.v. versa

--

985107985007

--

985101985001

--

985102985002

--

985104985004

--

985105985005

--

985103985003

25

HALLWAY COLLECTION

DIELE: NEO

NEO

E 5.2018

211,2

Suggested combinations

Price gr.III

as illustr.v. versa

As an alternative to planning an individual unit from the complete range there is the possibility of choosing from specially suggested combinations. This eases planning. Incorporating accessories can enhance the suggested combinations. These are charged extra.

--

985106985006

26DIELE: NEO

NEO

E 5.2018

4 Raster units

L L

L L

4 Raster units70.4 cm high(72.2 cm high incl. 1.8 cm high plinth adjusters), 45.0 cm deep

Changing versions:See here the information on pages 22-23.

12 Raster units211.2 cm high (213.0 cm high incl. 1.8 cm high plinth adjusters), 45.0 cm deep

Changing versions, interior fittings:See here the information on pages 22-23.

Max. load: 40 kg

Max. load: 40 kg

52.8 cm wide 70.4 cm wide 105.6 cm wide

Price gr.III

Price gr.III

Price gr.III



12 Raster units1 door

1 mirror door

3 drawers

Accessories: see page 29 Lamps: see page 30


--

4591

--

4791

--

41091

--

125212 R125211 L

--

127212 R127211 L

--

125262 R125261 L

--

127262 R127261 L

27

HALLWAY COLLECTION

DIELE: NEO

NEO

E 5.2018

Price gr.III

Price gr.III

52.8 cm wide 70.4 cm wide 52.8 cm wide 70.4 cm wide

52.8 cm wide 70.4 cm wide 52.8 cm wide 70.4 cm wide 52.8 cm wide


4.7 W 6.3 W 10.2 W

Clothes panels

Mirrors

Wall shelves

LED lamps for wall shelves

Mirrors0.4 cm thick

on 3.2 cm thick grey lacquered base plate

Wall shelves2.9 cm thick;23.4 cm deep

for fitting anywhere on walls

LED lamps for wall shelves: see below!

LED lamps for wall shelves

A Magic-Tronic or remote control for operating the LED lamps is possible at a surchar-ge (see page 30)

6 Raster high (105.6 cm) 8 Raster high (140.8 cm) 12 Raster high (211.2 cm)

Clothes panels70.4 or 211.2 cm high;3.8 cm thick;35.0 cm deep incl. hat shelf

Clothes rod and bag hooks in high-gloss chrome

Clothes panel incl. hat shelf and clothes rod; 70.4 cm high; for fitting anywhere on wall

Clothes panel incl. hat shelf, clothes rod and 3 bag hooks; 211.2 cm high

for 105.6 cm widthfor 70.4 cm width for 140.8 cm widthfor 35.2 cm width for 52.8 cm width

This luminaire contains built-in LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V

--

458

--

478

--

1258

--

1278

-

665

-

667

-

865

-

867

-

1265

--

3524

--

5224

--

7024

--

1024

--

1424

-

822

-

112

-

142

28DIELE: NEO

NEO

E 5.2018

3 3 4

3 3 4

3 3 4

3 3 4

Wall units





as illustr.v. versa

as illustr.v. versa

as illustr.v. versa

as illustr.v. versa

1 drawer 1 drawer; 1 open compartment

1 flap 1 flap; 1 open compartment

2 drawers 2 drawers; 1 open compartment

2 drawers; 1 open com-partment

1 flap 1 flap; 1 open compartment

1 Raster wall units17.6 cm high;45.0 cm deep


Changing versions, wall units:See here the information on pages 22-23.

Max. load of wall units:Max. load 15 kg per metre:52.8 cm width: 7.5 kg70.4 cm width: 10.0 kg105.6 cm width: 15.0 kg140.8 cm width: 20.0 kg176.0 cm width: 25.0 kg

2 Raster wall units35.2 cm high;45.0 cm deep


Changing versions, wall units:See here the information on pages 22-23.

Max. load of wall units:Max. load 15 kg per metre:52.8 cm width: 7.5 kg70.4 cm width: 10.0 kg105.6 cm width: 15.0 kg140.8 cm width: 20.0 kg176.0 cm width: 25.0 kg

2 flaps; 1 open com-partment

2 drawers; 1 open com-partment

2 flaps; 1 open com-partment

Price gr.III

Price gr.III

Price gr.III

Price gr.III


34

--

108102108101

--

15810

--

17810

--

148102148101

--

178102178101

--

15880

--

17880

--

108802108801

--

148802148801

--

178802178801

--

25910

--

27910

--

209102209101

--

249102249101

--

279102279101

--

25880

--

27880

--

208802208801

--

248802248801

--

278802278801

29

HALLWAY COLLECTION

DIELE: NEO

NEO

E 5.2018

Price gr.III

Accessories

Cover shelves

for 70.4 cm width

for 52.8 cm width

for 105.6 cm

width

Price gr.III

Fitted shelf1.9 cm thick

Tableaulined with grey fabric

USB charging stationwith two double USB connections (for mobiles, tablets, etc.); current strength per double USB connection: 1x max. 2.100 mA or 2x 1.050 mA. The USB charging station is only suitable for devices that are compatible with the above power level data.Connection cable between USB charging station and device is not supplied.

Extendable clothes rod

Utensil basketchrome, is fitted to the inner side of closed single units

Height: 10 cmWidth: 28 cmDepth: 12 cm

Cover shelf2.9 cm thick; 45.0 cm deep

All units and wall units can be fitted with an extra cover shelf. The cover shelf is charged in 10 cm lengths or parts thereof. To make things easier, only the total width of the combination needs to be calculated here. The cover shelves are full-length up to a max. 299.2 cm width.Cover shelves are not available in high-gloss lacquer! In this case we recommend cover shelves of rear-lacquered glass (see below).

Cover shelves of rear-lacquered glass, optionally rear-lacquered in white, grey or silk grey0.8 cm thick; 45.0 cm deep

All units and wall units can be fitted with an extra cover shelf. The cover shelf is charged in 10 cm lengths or parts thereof. To make things easier, only the total width of the combination needs to be calculated here. The cover shelves are full-length up to a max. 299.2 cm width.

Please be sure to state the required version when ordering!

Price per 10 cm section:

45.0 cm deep

Price per 10 cm section:

45.0 cm deep

for floor units

for wall units

for floor units

for wall units

--

154

--

174

-

8625

-

8626

-

8627

-

9625

-

9626

-

9627

-

8525

-

8526

-

9525

-

9526

-

734

-

094

--

3510

-

3530

30DIELE: NEO

NEO

E 5.2018

This luminaire contains built-in LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V

LED lamps incl. footswitch. A remote control unit is possible for operation (against a surcharge).

Lamps

Remote control unit with changing colours


The lamps are normally operated by an external footswitch. The colour temperature of the LED lamps is cold white if a footswitch is used. A 4-channel remote control unit (= transmitter), which is charged extra, is also available as an alternative. Several lamps (up to a total load of a maximum 30 W per transformer and receiver) can be operated with each of the 4 channels. All 4 channels can be dimmed separately at the push of a button. The colour temperature of all 4 channels can be set from cold white (= the basic setting of the LED lamps) to warm white. If warm white is required, a radio remote control unit must be ordered. It is also possible to switch all channels on and off simultaneously with the “all on” or “all off” buttons. Up to 4 transmitters can operate as many receivers as required. Transmitters and receivers must be ordered separately. The footswitch is omitted when the remote control unit is used.



Magic-Tronic

LED light strip1.0 cm thick; 1.1 cm deep

LED light strip incl. footswitch. A Magic-Tronic or remote control is possible for operation (against surcharge; see below).

Integrated power LED spotlampØ 7.1 cm

Integrated power LED spotlamp incl. footswitch. A Magic-Tronic or remote control is possible for operation (against surcharge; see below).

for fitting in units, wall shelves, open compart-ments of wall units, lower cover shelves of wall units

for fitting in lower cover shelves of wall units

for 70.4 cm width

for 52.8 cm width

for 105.6 cm

width

for 140.8 cm

width

for 176.0 cm

width

2.4 W 4.7 W 6.3 W

2.4 W 4.7 W 6.3 W

2.4 W 4.7 W 6.3 W 10.2 W 2x 4.7 W

2.9 W

for fitting in units

for fitting in open com-partments of wall units

-

522

-

822

-

112

-

522

-

722

-

112

-

112

-

522

-

822

-

142

-

172

-

7941

-

7617

-

2016

-

2017

31

HALLWAY COLLECTION

DIELE: NEO

NEO

E 5.2018


SCOPIA

32DIELE: SCOPIAE 5.2018

SCOPIA is clear and uncomplicated. Modern and easy to configure, this single unit system easily adapts in its appearance and practical features to meet all furnishing wishes. Since the carcase is made up of two shells, there is an almost endless number of ways of com-bining lacquer and wood surfaces, a feature which would not be available if a different form of construction were used. Open and closed units can be fitted at will. With its floor and wall units and its narrowly defined scale of sizes, SCOPIA is so flexible that it is easy for it to solve any furnishing problem.

• 2 - 8 Raster high single units, 16 Raster high single units with mirror doors• 4 Raster high sideboards• Wall units• Clothes unit and clothes panels• Mirrors• Comprehensive range of accessories

• Drawer frames in standard grey

• Max. load of fitted wooden and glass shelves (up to 55.1 cm width) as well as drawers: 25 kg

Max. load of fitted wooden and glass shelves (from 55.1 cm width): 15 kg

Please also note any existing maximum load details stated for the individual units later in this type list as well as the surface load table on the following page.

• hülsta-Push-to-open: Drawers, flap units and hinge-doors with hülsta-Push-to-open device. All drawers on hidden roller bearings as fully pull-out units.

Important notes: Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units. That is why wall mounting should only be carried out by properly trained and qualified fitters. hülsta supplies materials for mounting units on walls for nearly all the units and which should be used for safety and for constructional reasons. The assembly materials supplied by hülsta (plugs, screws) are only suitable for fitting components on to concrete in firmness class C12/15.For other materials (please see separate materials table in the wall composition chapter) we provide you with an assembly mortar set as an extra order. Please note that this assembly mortar set is also only suitable for the materials listed in the materials table. If walls are made up of other materials (e.g. plastered or lighter wall materials), one should use another method of mounting better suited to the load on site. Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over – especially when alternative mounting materials acquired on site have been used.For the reasons stated above it is absolutely essential to enquire about the composition of any walls before signing any contracts.

Link to the assembly / user instruction movies

HALLWAY COLLECTIONSCOPIA

33DIELE: SCOPIA E 5.2018

Accent versions:Dark grey shading in illustrations = niche rear wall and box drawers in lacquer versions of old rose, pastel green, teal blue, terracotta and petrol

Changing versions:In SCOPIA specially chosen components from the individual product groups are avail-able in a variety of versions. See here the illustrations above.In SCOPIA colour combinations within individual types are possible. In this case state the model number clearly and separately in the order! When versions from different price groups are exchanged, the higher price group is always charged.

Veneer direction of wooden surfaces:The 1 Raster high drawers and flaps have a standard horizontal veneer.Drawers, flaps and doors up to 6 Raster height can have an optional horizontal or ver-tical veneer. Please state the required veneer direction clearly in the order. If no veneer direction is stated in the order, the drawers, flaps and doors up to 6 Raster height have a standard horizontal veneer.The 8 Raster high doors always have a vertical veneer.

Please state all the versions clearly in the order!

Combinations of floor and wall units:If floor and wall units are combined within an arrangement, there must not be any skirting boards in the room near the floor units, otherwise they must be removed.


34

Surface load tableMax. surface load for usable surfaces incl. drawers:Please look for the matching height and width of your unit in the table below and thus calculate the maximum surface load.

2R 3R 4R 6R 12R 16R 18R

2R 18 kg 25 kg 32 kg 46 kg 90 kg 117 kg 130 kg




12R 63 kg 86 kg 109 kg 155 kg - - -

Height: Width:

2R = 2 Raster3R = 3 Rasteretc.

Lists of versions

White lacquerWool white lacquerSand lacquerGrey lacquer

640649644641

VersionsExterior carcase Price groupModel no.

IIII

White lacquerWool white lacquerSand lacquerGrey lacquerNatural oakDark stained oakCore walnut

640649644641685692680

VersionsInterior carcase, rear walls, fittings, fitted shelves, partitions, flaps, drawers and doors

IIIIIIIIII

Price groupModel no.

Old rose lacquerPastel green lacquerTeal blue lacquerTerracotta lacquerPetrol lacquer

605651652653654

Accent versionsAccent niche rear wall and box drawers

IIIII

Price groupModel no.Accent

1

2

Notes on delivery:The majority of the units are delivered standard as fully connected units (glued) so that the carcase cannot be disassembled. There are however some excep-tions to this rule:




SCOPIA


--

980130980030

--

980131980031

210,

8

57,2

S

S

157,

5

210,

8

S

82,8

S

SS

S

S

SS

153,

8

210,

8

T = Door

TTT

210,

8

57,2

57,2

Suggested combinationsAs an alternative to planning an individual unit from the complete range there is the possibility of choosing from specially suggested combinations. This eases planning. Incorporating accessories can enhance the suggested combinations. These are charged extra.

Suggested combination Suggested combination

Suggested combinationSuggested combination

S = Drawer

Price gr.III

as illustr.v. versa

Price gr.III

as illustr.v. versa

Price gr.III

--

980132980032as illustr.

v. versa

Price gr.III

--

980133980033as illustr.

v. versa

S = Drawer

S = Drawer



--

980135980035

--

980136980036

210,

8

57,2S

S

S

S

210,

8

29,5S

SS

Suggested combinationsAs an alternative to planning an individual unit from the complete range there is the possibility of choosing from specially suggested combinations. This eases planning. Incorporating accessories can enhance the suggested combinations. These are charged extra.

Suggested combination Suggested combination

Price gr.III

as illustr.v. versa

Price gr.III

as illustr.v. versa

S = Drawer S = Drawer

SCOPIA


Wall brackets for 2 and 3 Raster high single units

3 Raster high single units42.3 cm high (44.4 cm high incl. 2.1 cm high plinth adjusters),34.2 or 46.2 cm deep

See 2 Raster high single units for further information.

-

44

-

46

6R4R

--

24131

--

24141

--

26131

--

26141

4R 6R

--

34131

--

34141

--

36131

--

36141

2 and 3 Raster high single units2 Raster high single units29.5 cm high (31.6 cm high incl. 2.1 cm high plinth adjusters),34.2 or 46.2 cm deep

Single units consisting of outer carcase, inside carcase and rear wall.

Wall units/stacked units:If single units are planned as wall units, a wall bracket must be ordered (see below). If single units are stacked on top of one another, a wall bracket is also necessary for each stacked unit.

Accessories and lighting see pages 42-43.

Changing versions and veneer direction:See here the information on page 33.

Max. load of wall units:Please also note here the no-tes in the “Wall composition” chapter and the surface load table on page 33.

1 drawer 1 drawer

2 drawers 2 drawers

34.2 cm deep 46.2 cm deep 34.2 cm deep 46.2 cm deep


4 Raster wide (55.1 cm) 6 Raster wide (80.7 cm)

Price gr.III

Compartment widths:

Price gr.III

Compartment widths:

Wall bracketIf single units are planned as wall units, a wall bracket must be ordered.If single units are stacked on top of one another, a wall bracket is also necessary for each stacked unit.Please state clearly in the order.Please also note here the notes in the “Wall composition” chapter!

for 6 Raster widthfor 4 Raster width




4R 6R

4R 6R

4R 3R | 3RL

--

44131

--

44141

--

46131

--

46141

--

44231

--

44241

--

46231

--

46241

--

440312 R440311 L

--

440412 R440411 L

--

460411

--

460311

4R 6R

4R 3R | 3RL

--

64231

--

64241

--

66231

--

66241

--

640312 R640311 L

--

640412 R640411 L

--

660311

--

660411

Wall brackets for 4 and 6 Raster high single units

-

44

-

46


See 4 Raster high single units for further information.







Price gr.III

Compartment widths:

Price gr.III

Compartment widths:

Price gr.III

Compartment widths:

Price gr.III

Compartment widths:

Price gr.III

Compartment widths:

Wall bracketIf single units are planned as wall units, a wall bracket must be ordered.If single units are stacked on top of one another, a wall bracket is also necessary for each stacked unit.Please state clearly in the order.Please also note here the notes in the “Wall composition” chapter!








Interior fittings:1 fitted wooden shelf is fitted behind 4 Raster high wooden doors.

3 drawers

2 drawers

1 door

3 drawers

2 drawers

2 doors

2 doors

3 drawers

1 door

3 drawers

4 and 6 Raster high single units



SCOPIA


8 Raster high single units106.3 cm high (108.4 cm high incl. 2.1 cm high plinth adjusters), 34.2 or 46.2 cm deep


Interior fittings:3 fitted wooden shelves are fitted behind 8 Raster high wooden doors.

8 Raster high single units







4R 6R

Price gr.III

Compartment widths:

Price gr.III

Compartment widths: 4R 6R

Price gr.III

Compartment widths:

4 drawers 4 drawers


5 drawers 5 drawers

34.2 cm deep 34.2 cm deep 46.2 cm deep

Wall brackets for 8 Raster high single unitsWall bracketIf single units are planned as wall units, a wall bracket must be ordered.If single units are stacked on top of one another, a wall bracket is also necessary for each stacked unit.Please state clearly in the order.Please also note here the notes in the “Wall composition” chapter!

-

44

-

46



46.2 cm deep

4R 6R


2 doors1 door

L

--

84131

--

84141

--

86131

--

86141

--

84231

--

84241

--

86231

--

86241

--

840312 R840311 L

--

840412 R840411 L

--

860311

--

860411



2 Raster high (29.5 cm); 12 Raster wide (157.5 cm)

Wall units29.5 or 157.5 cm high,34.2 cm deep

Wall units consisting of outer carcase, inside carcase and rear wall.




4R | 2R | 6R 4R | 4R | 4R

--

21231422123141

--

212317

open compartments; 2 drawers

12 Raster high (157.5 cm); 2 Raster wide (29.5 cm)

2R

4R | 4R | 4R 4R | 2R | 6R 4R | 2R | 4R | 2R

-

412

4R | 4R | 4R

--

412411

6R | 6R

--

412412

4R | 2R | 6R

--

41241324124131

4R | 2R | 4R | 2R

--

41241424124141

--

12231

3 4

4 3

3 3


34

4 drawers

Wall brackets for 4, 6 and 8 Raster high sideboards Wall bracketIf sideboards are planned as wall units, a wall bracket must be ordered.If sideboards are stacked on top of one another, a wall bracket is also necessary for each stacked unit.Please state clearly in the order.Please also note here the notes in the “Wall composition” chapter!

1 door; 3 drawers; 1 door

1 door; open compartments; 2 drawers 3 doors; open compartments

12 Raster wide (157.5 cm)

for 12 Raster width

4 Raster high sideboards4 Raster high sideboards55.1 cm high (57.2 cm high incl. 2.1 cm high plinth adjusters),46.2 cm deep

Sideboards consisting of outer carcase, inside carcase and rear wall.

Interior fittings:1 fitted wooden shelf is fitted behind 4 Raster high wooden doors.


46.2 cm deep 46.2 cm deep

46.2 cm deep 46.2 cm deep

Price gr.III

Compartment widths:

Price gr.III

Compartment widths:

as illustr.v. versa

Wall units/stacked units:If sideboards are planned as wall units, a wall bracket must be ordered (see below). If sideboards are stacked on top of one another, a wall bracket is also necessary for each stacked unit.




Wall units

as illustr.v. versa

Open compartments; 3 drawers

Open compartments; 3 drawers

Price gr.III

Compartment widths:

34.2 cm deep 34.2 cm deep 34.2 cm deep

SCOPIA


16 Raster high single units with mirror doors208.7 cm high (210.8 cm high incl. 2.1 cm high plinth adjusters),34.2 or 46.2 cm deep


Interior fittings:3 fitted wooden shelves are fitted behind 12 Raster high mirror doors.1 fitted wooden shelf is fitted behind 4 Raster high wooden doors.

Cannot be planned as wall units!



3R 6R4RL L

3R 6R4RL L

3R 6R4RL L

1 mirror door; 2 drawers 1 mirror door; 2 drawers 2 mirror doors; 2 drawers

1 mirror door; 1 door 1 mirror door; 1 door 2 mirror doors; 2 doors

--

1630372 R1630371 L

--

1640372 R1640371 L

--

1660371

--

1630472 R1630471 L

--

1640472 R1640471 L

--

1660471

--

1631372 R1631371 L

--

1631472 R1631471 L

--

1641372 R1641371 L

--

1641472 R1641471 L

--

1661371

--

1661471

--

1632372 R1632371 L

--

1632472 R1632471 L

--

1642372 R1642371 L

--

1642472 R1642471 L

--

1662371

--

1662471

Price gr.III

Compartment widths:

Price gr.III

Compartment widths:

Price gr.III

Compartment widths:

16 Raster high single units with mirror doors3 Raster wide (42.3 cm) 6 Raster wide (80.7 cm)

34.2 cm deep 46.2 cm deep 34.2 cm deep 46.2 cm deep 34.2 cm deep 46.2 cm deep




4 Raster wide (55.1 cm)


2 mirror doors; 2 drawers 2 mirror doors; 2 drawers 2 mirror doors; 2 drawers



Clothes unit, clothes panels34.0 or 46.0 cm deep

Clothes rod and bag hooks in high-gloss chrome

Clothes panels for fitting anywhere on wall

Mirror0.4 cm thickon 1.9 cm thick, grey lacquered base plate

Total depth: 3.4 cm

Mirror

2R wide (29.5 cm) 4R wide (54.9 cm) 4R wide (54.9 cm)

Clothes panel incl. hat shelf, clothes rod and 3 bag hooks; 16 Raster high (208.7 cm);

46.0 cm deep

Veneer direction of wooden versions:top box in horizontal veneer,

panel in vertical veneer

Clothes panel incl. hat shelf, clothes rod and 3 bag hooks; 12 Raster high (157.5 cm);

46.0 cm deep

Veneer direction of wooden versions:top box in horizontal veneer,

panel in vertical veneer

Clothes unit with mirror frontincl. hat shelf, clothes rod, 2 bag hooks and bag shelf;

16 Raster high (210.8 cm incl. two 2.1 cm high plinth adjusters

at front); 34.0 cm deep

4R wide (55.0 cm) 4R wide (55.0 cm) 4R wide (55.0 cm)

4R high (55.0 cm) 6R high (80.7 cm) 10R high (128.0 cm)

--

16208

--

1238

--

1638

-

257

-

457

-

657

Pull-out clothes rod

High-gloss chrome

Pull-out clothes rod

-

734

Clothes unit, clothes panels

Price gr.III



SCOPIA


Accent colour niche rear wallsNiche rear walls - 1.1 cm thick, can be fitted in units between fitted shelves and partitions/carcase sides, 1-16 Raster high. Fitted shelves can be planned anywhere. It is not possible to fit a rear wall later. Fitted wooden shelves cannot be fitted in front of a niche rear wall. Rear walls with all-round brush seal.

-

119

-

129

-

139

-

149

-

219

-

229

-

239

-

249

-

319

-

329

-

339

-

349

-

419

-

429

-

439

-

449

Accessories

for 1 Raster high niches




Accent colour niche rear walls

Accent versions:Dark grey shading in illustrations = niche rear wall and box drawers in lacquer versions of old rose, pastel green, teal blue, terracotta and petrol

for 1 Raster wide niches




Box drawers accent colour versions

Dark grey shading in drawings = box drawers in lacquer versions of old rose, pastel green, teal blue, terracotta and petrol

Box drawers accent colour versions

Dark grey shading in drawings = box drawers in lacquer versions of old rose, pastel green, teal blue, terracotta and petrol

Box drawer Box drawer Box drawer

for 1 Raster width for 2 Raster width for 3 Raster width

Box drawers1 Raster high box drawers8.8 cm high;23.5 cm deep

can be fitted in open compart-ments

2 Raster high box drawers21.6 cm high;23.5 cm deep

can be fitted in open compart-ments

-

11

-

12

-

13

-

21

-

22

-

23

Box drawer Box drawer Box drawer

Accent

Accent

Accent



Integrated LED spotlampfor fitting in single units

This luminaire contains built-in LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 3.0 W

-

201

-

301

-

401

-

601

-

203

-

303

-

403

-

603

-

7941

--

132

--

142

--

133

--

143

--

134

--

144

--

136

--

146

2R 4R3R

Protective mat for fitted shelves

6R

-

632

-

642

-

633

-

643

-

634

-

644

-

636

-

646

Protective mat for fitted shelvesProtective mat for fitted shelvesof transparent plastic

Fitted wooden shelvesFitted wooden shelves1.9 cm thick28.3 or 40.3 cm deep(for 34.2 or 46.2 cm depth)

for fitting anywhere in carcase units within the Raster system.

for 2 Raster wide compartments




for 34.2 cm depth

for 46.2 cm depth

for 34.2 cm depth

for 46.2 cm depth

for 34.2 cm depth

for 46.2 cm depth

for 34.2 cm depth

for 46.2 cm depth

Price gr.III

for fitted shelf width:

LED light stripfor fitting in fitted wooden shelves

This luminaire contains built-in LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 1.6-5.5 W

Lamps

LED light panel1.9 cm thick, 3.0 cm deep;for fitting behind fitted wooden shelves or under fitted glass shelves

This luminaire contains built-in LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 1.7-5.5 W

3.0 W

1.6 W 2.4 W 3.5 W 5.5 W

1.7 W 2.7 W 3.5 W 5.5 W

for 4 Raster widthfor 3 Raster widthfor 2 Raster width for 6 Raster width

under glass shelves

behind wooden shelves

for 34.2 cm depth

for 46.2 cm depth

for 34.2 cm depth

for 46.2 cm depth

for 34.2 cm depth

for 46.2 cm depth

for 34.2 cm depth

for 46.2 cm depth



Magic-Tronic

-

7617


-

2016

-

2017


The lamps are normally operated by an external footswitch. The colour temperature of the LED lamps is cold white if a footswitch is used. A 4-channel remote control unit (= transmitter), which is charged extra, is also available as an alternative. Several lamps (up to a total load of a maximum 30 W per transformer and receiver) can be operated with each of the 4 channels. All 4 channels can be dimmed separately at the push of a button. The colour temperature of all 4 channels can be set from cold white (= the basic setting of the LED lamps) to warm white. If warm white is required, a radio remote control unit must be ordered. It is also possible to switch all channels on and off simultaneously with the “all on” or “all off” buttons. Up to 4 transmitters can operate as many receivers as required. Transmitters and receivers must be ordered separately. The footswitch is omitted when the remote control unit is used.

44DIELEE 5.2018

Notes

45

HALLWAY COLLECTION

DIELE E 5.2018


Standard position of Magic-Tronic:• for (assembly) units and wall units: in the right outer side section• for side-panel combinations: in the right outer side-panel

Standard depth position:• for (assembly) units, wall units and side-panels: approx. 12 cm from the rear rim

Standard height position:• for all ranges (exception: SCOPIA range): for 1 to 8 Raster high floor (assembly) units and side-panels:

approx. 7-15 cm from the top rim of the appropriate unit• for the SCOPIA range: for 2 to 12 Raster high floor (assembly) units: approx. 7-15 cm from the top rim of the

appropriate unit• for all ranges (exception: SCOPIA range): for 10 to 12 Raster high floor (assembly) units and side-panels:

in approx. 115 cm height• for the SCOPIA range: for 16 to 18 Raster high floor (assembly) units: in approx. 115 cm height• for wall units: fitted at a height determined in the factory in accordance with factors specific to the given range.

The same applies to technical exceptions because of custom-based planning.• for angled wooden shelves: fitted in the right side of the rear wall panel in accordance with factors specific to

the given range

Alternative positions:If the Magic-Tronic sensor is to be fitted in the left outer side section of an (assembly) unit or wall unit, in the left outer side-panel, in the left side of the rear wall panel of angled wooden shelves or at any position other than that stated as standard (e.g., if a unit is planned in a niche so that there is insufficient space to the right of the unit), please state this clearly in the order and mark the position in the sketch. If in doubt, please contact your hülsta customer advisor!

Please note:• Double functions in one shelf like spotlamps, lamps, transformers, wall shelf brackets and Magic-Tronic units are not

possible for reasons of stability and lack of space.• In the case of NEO media panels, the unit is fitted 12 cm from the right side and from the bottom rim.

Switch options for lamps

Magic-Tronic

Magic-Tronic

Examples of use (schematic diagrams)Black point = Standard position of Magic-Tronic sensor for floor (assembly) units, wall units and angled wooden shelves (example 1) or for side-panels (example 2)

Notes:The black point in the drawings is the area where the Magic-Tronic sensor is invisibly integra-ted. If the surface is „stroked“ at this position, the lamps are switched on or off.

If you would like to mark the position of the Magic-Tronic sensor on the furniture, you can fit a small metal plate supplied separately at the corresponding position.

In side-panels the Magic-Tronic unit can be operated from both sides of the side-panel, i.e. both from the outside as well as from the inside of the right side-panel - this means that the Magic-Tronic can even be operated when the furniture is fitted in a niche and there is insuf-ficient space to the right of the unit. Please note here that no objects should be placed on the inside of the unit in order to be able to operate the Magic-Tronic from the inside.

Illustration 1: “Stroking method“

Illustration 2: “Marking method“

Example 1

Example 2

-

7617

46DIELEE 5.2018

Switch options for lamps: Remote control unit with changing colours

The lamps are normally operated by an external footswitch. The colour temperature of the LED lamps is cold white if a footswitch is used. A 4-channel remote control unit, which is charged extra, is also available as an alternative. Several lamps (up to a total load of a maximum 30 W per transformer and receiver) can be operated with each of the 4 channels. All 4 channels can be dimmed separately at the push of a button. The colour temperature of all 4 channels can be set to any level from cold white (approx. 6500 kelvin = the basic setting of the LED lamps) to warm white (approx. 2700 kelvin). If warm white is required, a radio remote control unit must be ordered. It is also possible to switch all channels on and off simultaneously with the “all on” or “all off” buttons. Up to 4 transmitters can operate as many receivers as required. Transmitters and receivers must be ordered separately. The footswitch is omitted when the remote control unit is used.

The following points must be noted with the radio remote control unit:- The receiver must be positioned behind a rear wall or under plinth shelves (at least 20 mm space required under plinth shelves).- The total wattage power of all lamps included per power supply unit/receiver must not exceed 30 W.- 4 channels = 4 light groups- 1 light group = x lights- All lamps within a light group can be dimmed to the same brightness.- The same light colour can be set for all lamps in all the light groups. This light colour is then valid for all the lamps.- The remote control unit is not suitable for equipment operating on 110 V.

Important notes:The information on basic settings for the LED lamps as well as setting the colour temperature do not apply to the MEGA-DESIGN and MULTI-VARIS ranges! Please be sure to note the operating and programming instructions!

4-channel remote control unit with changing colours

Light colour warmer

Light colour colder

Channel 1 to 4(with dimmer function)

All off

All on Price per transmitter type Price per receiver type

4-channel remote control unit with changing colours


-2016-2017

47

HALLWAY COLLECTION

DIELE E 5.2018

Switch options for lamps: Remote control unit with changing colours

Examples of use (schematic diagrams)

Example 1Lights inside a unit

Channel 1 operates (and dims) all the lights in light group 1, i.e. the LED spotlamp in the left cabinet

Channel 2 operates (and dims) all the lights in light group 2, i.e. the LED spotlamps in the open compartment

Channel 3 operates (and dims) all the lights in light group 3, i.e. the LED spotlamp in the right cabinet

Required are:1 transmitter 1x type1 receiver 1x type

Notes:The total wattage power of all lamps included per power supply unit/ receiver must not exceed 30 W. The same light colour can be set for all lamps in all the light groups. This light colour is then valid for all the lamps.

Example 2Lights in units set apart

Channel 1 operates (and dims) all the lights in light group 1, i.e. the LED spotlamp and the LED light panels in the left cabinet

Channel 2 operates (and dims) all the lights in light group 2, i.e. the LED spotlamps and the LED light panels in the centre cabinet

Channel 3 operates (and dims) all the lights in light group 3, i.e. the LED spotlamp and the LED light panels in the right cabinet

Required are:1 transmitter 1x type3 receivers 3x type


Example 3Lights in units set apart

Channel 1 operates (and dims) all the lights in light group 1, i.e. the LED spotlamps in the left, centre and right cabinet

Channel 2 operates (and dims) all the lights in light group 2, i.e. the top LED light panels in the left, centre and right cabinet

Channel 3 operates (and dims) all the lights in light group 3, i.e. the bottom LED light panels in the left, centre and right cabinet

Required are:1 transmitter 1x type3 receivers 3x type


-2016-2017

-2016-2017

-2016-2017

1

1

1

2 2

2

2

1Channel

2Channel

3Channel

3

3

3

1

2

3

1Channel

3Channel

2Channel

1

2

3

3

1

1Channel

2Channel

3Channel

22

3

11

3x

3x

48DIELEE 5.2018

Special-sized products

Special articlesHigh-gloss care setPolish, polishing sponge and polishing cloth (incl. instructions) for protecting and maintaining the high-gloss surfaces 36 -

Special colours; Note on „Blue Angel“ / Emissions label of DGM

Special coloursAll the hülsta lacquer colours are possible for nearly all the hülsta ranges. Availability and prices on request.

Note on „Blue Angel“ (RAL-UZ 38) and Emissions label of DGM (Class A)It is possible that the requirements of the „Blue Angel“ and the DGM Emissions Label can-not be met by some of the lacquer colours in price groups II and III (see here the different lacquer versions in the NURIA range), depending on the colour mix (surface ratio of these colours in the corresponding order). However, the legal requirements are definitely met in all cases!

Individual special-sized productsIf the special-sized product that you require is so unusual that it cannot be illustrated with the many special sized products that we already provide and charge for, then we will quote you the price using a HK unit type factor. In your order please state for us the relevant enquiry number and the HK unit type factor stated.

-HK

49

HALLWAY COLLECTION

DIELE E 5.2018

Labelling in type list drawings / assembly notes for wall unitsThe majority of units have two wall mounting points (= number of support boards), if these are to be fitted as wall units. This is not explicitly mentioned in the type list. If a diffe-rent number of wall mounting points (= support boards) is required, this is marked in the drawings in the type list with numbers in black boxes. Every support board requires four mounting screws.

One assembly mortar set is sufficient for up to a maximum of 3 support boards or 4 wall side-panels.

Important note: Depending on the composition of the wall (see wall types illustrated above), assembly must be carried out using the special assembly mortar set and a standard trade mastic tool which are the basic essentials for safe and clean workmanship.

Wall composition / assembly instructionImportant notes:The composition of walls must be ascertained before concluding a contract and be checked by a qualified fitter before assembly takes place.

Assembly may only be carried out by a qualified fitter under careful observation of the assembly instructions.

The plastic Rawl plugs with the type name SX 8 x 65 from the Fischer Company supplied by hülsta as a standard set are only suitable for concrete ≥ C12/15, if the wall composi-tion and compression strength corresponds to the table below. Under no circumstances must a unit be assembled on light masonry.

Furthermore, we provide a mounting set with assembly mortar from the Fischer Company for the types of walls listed below (see assembly mortar set below). Again, assembly must be carried out by a qualified fitter under careful observation of the wall composition and assembly instruction. The compression strength levels stated below must be met under all circumstances.

Assembly mortar set for up to a maximum of 3 support boards consisting of:

9x injection retaining sleeve9x screw-in sleeve1x injection cartridge2x static mixer1x assembly instructions

Please use the mounting screws from the standard set (supplied free of charge).

Mounting sets

Standard setThe standard set consists of 4 plastic Rawl plugs (SX 8 x 65) and 4 mounting screws and is sufficient for 1 support board. The standard sets are included in the packet of fittings to match the number of support boards.

A different and more suitable type of mounting must be chosen by a qualified fitter in all other cases. hülsta cannot accept any responsibility for the choice of any other types of mounting! Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over – especially when alternative mounting materials acquired on site have been used. Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units.

34

= 3 support boards= 4 support boards, etc.

Building bricks Mz 12Compression strength ≥ 12 N/mm²

Limestone blocks KS 12Compression strength ≥ 12 N/mm²

Perforated sand lime bricks KSL12Compression strength ≥ 12 N/mm²

Vertically perforated bricks HLz 12Compression strength ≥ 12 N/mm²Bulk density ≥ 1.0 kg/dm³

Concrete C12/15Compression strength ≥ 15 N/mm²

Assembly mortar set only suitable for the materials stated below!Standard set (SX 8 x 65)

Solid blocks of light concrete V2Compression strength ≥ 2 N/mm²

Perforated blocks of light concrete Hbl 2Compression strength ≥ 2 N/mm²

Aerated concrete PP2Compression strength ≥ 2 N/mm²

Materials tablewith a description of which sets are to be used with the following types of walls:

Example of order:

• Add up number of support boards for all existing unit types

• Divide the sum by “3”

• Round up the result to a full number

= Number of assembly mortar sets required

Important notes

-

M2

Design and concept legally protected, subject to error and alterations to construction, colour and materials by way of technological progress.

Stand:

hülsta DIELE

Your Hotline to hülsta

Lots to do? A customer wants his project finished and you haven’t got enough time? Or the project is so complex that it will take too much time?

This is exactly the kind of situation we created the hülsta Planning Service for. hülsta’s employees create the required project for you at short notice. Based on your information, we implement the project perfectly with all views and a complete order list ready for immediate forwarding to the customer.

The hülsta check list (available at https://hulsta.com/de/service/showroom/) makes it all really easy for you. You won’t forget anything with this list and the customer receives a project he will be thrilled about as quickly as possible.

Our Saturday hotline is available all day from 10.00 a.m. until 6.00 p.m.

Telephone: +49 (0) 2563 / 86-1800

On working days the hülsta Sales Department is available all day from 8.00 a.m. until 6.00 p.m.

hülsta Planning Service

Special wishes? Come to us!

We are open Saturdays for you, too!

E 5.2018

Maximum individuality! – Maximal flexibility! – hülsta makes most of your special wishes possible.And if you do have a wish which is not quite so easy to implement, just give us a call or send us a mail or a fax. We have our own hülsta “Special Wishes Team” who are there to help you realise just these customer requests. These colleagues are professionals when it comes to special products. They plan and calculate the products possible for you and even develop an alternative suggestion if the idea should turn out to be technically impossible.

Here is an overview of the hülsta range of special wishes:• A lot of special products can be ordered simply via the type list• Special-sized products are planned simply and professionally• Competent colleagues advise you by phone, by fax and by mail• You will be sent alternative suggestions if the idea is technically impossible• Many special-sized products are available without a surcharge• Specially qualified carpenters and technicians implement your plans perfectly

Do you have any questions or require any alterations to your order confirmation?Do you have any questions on our products or your current order?Do you have any complaints about supplied goods or required replacement parts?Contact Telephone: +49 (0) 2563 / 86-1144 • email: [email protected]

Do you have any questions, suggestions or wishes for the hülsta Marketing team or the hülsta product seminars?Contact Telephone: +49 (0) 2563 / 86-1611 • email: [email protected]

hülsta Planning ServiceTel.: +49 (0) 2563 / 86-0

Fax: +49 (0) 2563 / 86-2666Mail: [email protected] from 8.00 a.m. until 6.00 p.m.

hülsta Special Wishes TeamTel.: +49 (0) 2563 / 86-0

Fax: +49 (0) 2563 / 86-1417Mail: [email protected]

hülsta-werke · Karl-Hüls-Straße 1 · D-48703 StadtlohnTel. +49 (0) 2563 / 86-0 · Fax +49 (0) 2563 / 86-1000

www.huelsta.com

hallway - hulsta uk info-service · hallway collection. 3 hallway collection diele e 5.2018...

Documents