helping you go the distance ...and back again

HELPING YOU GO THE DISTANCE...AND BACK AGAIN

www.checkersindustrial.com

CHECKERS INDUSTRIAL SAFETY PRODUCTS • 800-438-9336 • www.checkersindustrial.com

Whether on mud, sand or swamp, MUD-TRAKS® will take you and your equipment where polyethylene mats and plywood can’t. Designed with a solid fiberglass grid structure that channels tire load throughout the mat, MUD-TRAKS® sets the industry standard for elite, portable roadway systems. MUD-TRAKS® provide maximum flotation. If the ground supports a man walking, and will take your equipment to the site.

MUD-TRAKS® PORTABLE ROADWAY SYSTEM

• Textured on both sides for traction• Can be easily handled by men in the field• Fits in the back of a pickup truck• Provides maximum load spread for the lowest psi of any mat

on the market

• No splintering and rotting like plywood

MUD-TRAKS® FEATURES:

companies, light cranes and special events.

LAWN MATS VEHICLE WEIGHT (up to 35,000 lbs)

MODEL SIZE WEIGHT

Model N2296HD 34 lbs.



Recommended for cemeteries, landscaping, pump service, golf courses and crossing sand.

• Flexibility prevents breaking under extreme loads

footprint• Pound for pound, MUD-TRAKS® are stronger than wood, steel

or plastic

Recommended for transmission line crews, well drillers, cranes and house movers.

OFF-ROAD SUPER LITE MATS VEHICLE WEIGHT (under 60,000 lbs)

MODEL SIZE WEIGHT

Model N4572HDSL 58 lbs.

Model N4596HDSL 80 lbs.

OFF-ROAD SUPER MATS VEHICLE WEIGHT MODEL SIZE WEIGHT

Model N3272HDS 48 lbs.

Model N4572HDS 74 lbs.

Model N4596HDS


From the Experts in Industrial Safety

When you need to move large work vehicles without damaging a lawn or driveway, TRAKMAT® is the solution. These mats can also prevent vehicles from getting stuck in muddy and wet conditions. Made from high performance polymers, TRAKMAT® does not rot or break like plywood. The standard mat is a light color so it will not

TRAKMAT® GROUND COVER MAT SYSTEMS

• Power cylinder surface provides maximum mat-to-ground and mat-to-tire traction

• Will not break, even with extreme loads of 60 tons• Manufactured with traction on both sides, or they can be smooth on

one side• Smooth-sided mats are used to drive over sidewalks, asphalt driveways

or anywhere you need to protect a surface• Hand cutouts are in all models, four in the full size and two in the small sizes• Connector holes are on the corners and sides• Multiple sizes available

TRAKMAT® ADVANTAGES:

MODEL SIZE WEIGHT

TM4496 78 lbs.

TM3696 64 lbs.

TM3672

TM2296 39 lbs.

TM2248

Dirtboard 60 lbs.

For rubber tire/track vehicles only. No steel tracks.

WILL NOT BREAK, EVEN WITH EXTREME LOADS OF 60 TONS


With its longevity, easy handling and superior strength, Shor-mat is a game changer in the shoring world. Projects are completed with ease and without plywood shoring. Shor-mat shatters the status quo and delivers a new standard for shoring accessories.

SHOR-MAT

• Warrantied for 6 years

• Does not absorb water

• Structural properties exceed industry standards• Satisfies OSHA excavation standards (Subpart P requirements)

• Made from high-performance polymers with embedded grids

SHOR-MAT FEATURES:

WE CAN CUSTOMIZE SHOR-MAT® WITH YOUR CORPORATE COLORS, LOGO, PHONE NUMBER AND WEBSITE.

SHORE SHEETING VS. DUAL-USE MATSHORE SHEETING:

• Matte finish on both sides

DUAL USE MAT:• Use for shoring or as portable roadway

• Traction surface on both sides or matte finish on one side

Shore sheeting hassmooth surface

Dual-use mat hastraction surface

PATENT-PENDING



Engineered laminated wood emtek® mats are half the weight of a comparable solid

conditions, providing safety for your workers and equipment.

EMTEK® HEAVY EQUIPMENT MATS

• •

• Selective cutting and treatment eliminate or distribute natural defects to provide reliable strength and superior performance

design values that exceed those of sawn wood mats• Every emtek® module is tested at the factory before shipment

EMTEK® ADVANTAGES:

MODEL NORMAL WEIGHT

678 lbs.

890 lbs.

CUSTOM SIZES AVAILABLEMODEL NORMAL WEIGHT

2,222 lbs.

2,670 lbs.

3,077 lbs.

SUPER CRIB

• Nonabsorbent• Unbelievable stability• Stronger, cleaner and safer than wood• Will not split• Aggressively patterned• Slip-resistant pyramid-locking and interlocking Lincoln Log surface• Use to build super stable box crib• Rope handle at both ends• Standard size: 6” x 7” x 2’

SUPER CRIB FEATURES:

on the ground if the soil underneath is stable enough to support the load.(Field personnel must make that determination.) We recommend the use of a rigid panel to be used under


TRAKPADs are made from ultrahigh-molecular weight polyethylene (UHMW). They have extremely long molecular chains, numbering in the millions. The longer chain transfers load

thermoplastic presently made. It is highly resistant to corrosive chemicals, has extremely

abrasion than carbon steel).

TRAKPAD OUTRIGGER/CRANE PADS

• Chemical and oil resistant• Advanced material and fabrication• Virtually unbreakable

• Non-marking and nonabrasive• Doesn’t chip, peel, crack, delaminate or rot• Impervious to insects• Simple to install and requires virtually no maintenance• Unlimited lifetime warranty• Ergonomic and environmentally friendly• Easy to clean• Hand cutouts for field handling• Multiple sizes available• Highly Visible Yellow Rails Available

TRAKPAD FEATURES:

MODEL VERTICAL LOAD CAPACITY

45˚ ANGLE LOAD CAPACITY DIMENSIONS WEIGHT AREA

55,000 lbs. 30,000 lbs. 325 in2

55,000 lbs. 30,000 lbs. 432 in2

60,000 lbs. 35,000 lbs. 20 lbs. 576 in2

24-2S 62,000 lbs. 40,000 lbs. 24 in. x 24 in. x 2 in. 38 lbs. 576 in2

900 in2

30-2S 85,000 lbs. 43,000 lbs. 30 in. x 30 in. x 2 in. 62 lbs. 900 in2

93,000 lbs. 43,000 lbs. 45 lbs. 2

36-2S 98,000 lbs. 45,000 lbs. 36 in. x 36 in. x 2 in. 90 lbs. 2

48-2S 55,000 lbs. 48 in. x 48 in. x 2 in. 2304 in2

Highly Visible Yellow Rails Available

APPLICATIONS:• Arborists’ Equipment• Concrete Pumps• Cranes• Vacuum Trucks• Drilling Rigs• Septic Pumpers/Cleaners• Utility Trucks• Any Type Of Aerial Equipment

Multiple Sizes Available



Outrigger and Crane Pads provide a safer, more stable rig because they have a bigger footprint than cribbing blocks. These lightweight, durable pads are made of composite fiberglass so they do not need to be as thick as pads made from wood or plastic.

• Lighter than wood• Won’t break, take up space, absorb water or rot• Nonskid surface provides superior traction

OUTRIGGER PADS/CRANE PADS FEATURES:

CUSTOM SIZES AVAILABLE

DOZER MATS

• Hand cutouts on both ends make them easy to handle• Dozer Mats are lightweight and portable

DOZER MATS FEATURES:

Stop road damage caused by bulldozers or other types of steel track vehicles with sturdy, environmentally conscious Dozer Mats. These mats prevent damage caused by steel treads crossing roadways, concrete shop floors and driveways. They work great in cemeteries under

can drive over Dozer Mats at speed without damage, and the mats won’t move.

COMPOSITE FIBERGLASS OUTRIGGER PADS/CRANE PADS

MODEL SIZE USAGE WEIGHT MISCELLANEOUS

2424HDS 24 in. Square Everyday Use Equipment under 25,000 lbs.

3232HDS 32 in. Square Everyday Use 30 lbs. Equipment under 25,000 lbs.

Normal Field Use Equipment up to 35,000 lbs.

2424 24 in. Square Rough Field Use 20 lbs. Most popular line of truck pads

3232 32 in. Square Demanding Field Use 38 lbs. Tandem equipment up to 70,000 lbs.

4545 45 in. Square Demanding Field Use 73 lbs. Cranes and tri-axle equipment

• Use under any size track vehicle• Dozer Mats are 2” wide x 8’ long and weigh 56 lbs

SAND MATSThese mats aren’t just for sand. Sandmats were also designed to deliver traction and momentum in dirt, mud, ice and snow. Constructed of high-density polyethylene, with a very aggressive traction pattern, sandmats willbend but will not break.

•

To view our full line of Safety Products, visit us at Dedicated to saving lives and protecting assets

Dedicated to saving lives and protecting assets.

Outrigger and Crane Pads provide a safer, more stable rig because they have a bigger footprint than cribbing blocks. These lightweight, durable pads are made of composite fiberglass so they do not need to be as thick as pads made from wood or plastic.

• Made from composite fiberglass• Light enough to be moved by two people• • •

TRENCH COVER FEATURES:

TRENCH COVERS

SIZE WEIGHT

62 lbs.

70 lbs.

95 lbs.

Custom sizes available.

Ditch Bridges are engineered to do the job safely, unlike high-risk, field-fabricated

them in place with the trucks you are using. No special equipment is needed.

• All aluminum construction (no rust)• • No painting ever required• Models with lower side rails allow clearance for almost any vehicle• • For vehicle weights up to 65,000 lbs (custom models available for heavier vehicles)

TRENCH COVER FEATURES:

DITCH BRIDGE

CAN HANDLE VEHICLESOF 30 TONS AND UP

CABLE RAMPSThis tough cable and pedestrian protection system pays for itself. Place the ramp where you want to lay the cable (even on rough or mildly sloped surfaces). Cables lay flat in up to five channels and with no kinking. Bright yellow cover adds high visibility. Ramps are easy to set up, tear down and store.

helping you go the distance ...and back again

Documents