English Version 0.1 2016

Horizontal Unit for apartments & single storey properties

Horizontal waste water heat recovery With the Showersave “Joulia” drain, heat recovery is straight forward. This scalable heat

recovery module is invisibly integrated into a slim channel in the shower floor, and

efficiently recovers heat energy from the warm shower water as it goes down the drain.

Beautifully designed and simple to install & maintain

Connected to the cold water supply.

The cold water supply is connected directly to the heat exchanger. In this way, the waste

energy of the used shower water pre-heats the incoming cold water, which reaches the

mixing valve already warmed, therefore using less energy from the boiler. The three

existing installation methods in SAP 2009 & 2012 are also applicable to the Showersave

Joulia Drain.

For an energy-efficient future.

Instead of flushing valuable energy straight down the drain, the Showersave Joulia

Drain, helps to keep it in the home, and helps plug the last gaping hole in an otherwise

perfectly insulated home.

Greater comfort with less energy!

• Beautifully designed to ensure ease of cleaning & maintenance

• Compact design – same size as similar drains without the heat exchanger

• Designed with maintenance in mind – critical components can be easily replaced

without the need for specialist trades

• Integrated trap in the system means no need for an external trap

• If you have a combi-boiler with limited power output, the pre-heated cold water

means you get better flow for your shower.

• The heat exchanger is totally invisible in the shower floor and very easy to clean.

Greater efficiency:

• Your valuable heat energy is recovered, rather than going straight down the

drain.

• The recovered heat energy pre-heats the incoming cold water, while the dirty

shower water flows down the drain as usual.

• Showersave Joulia Drain is very compact and works efficiently without any

electronics or moving parts!

• You benefit on your energy bill, saving up to 1,000 kWh per year in a 4-person

household.

Certification

All components of the Joulia-inline technology were developed according to the test

criteria of KIWA as well as of SVGW, and are registered there for certification. The

integrated trap meets the requirements of EN1253.

Maintenance & Cleaning All parts of the heat exchanger can easily be cleaned, serviced or even replaced. For

cleaning you can simply remove the green trap cover and immediately access the heat

recovery module. Any residues can by easily removed by using a brush and mild

detergent.

Contact Us

Building Products Distributors Ltd Unit 21, Avondale Business Park

Mill Road, Ballyclare BT39 9AU

Tel: 028 9334 4488

Email: sales@bpdlimited.com Web: www.showersave.co.uk