how to transfer services from sncp to msp
DESCRIPTION
if transfer by trial function , it is required todelete SNCP protection subnet firstly, and then search SNCP trailsagain. (while you delete SNCP subnet, trails will be lost , so it isrequired to search trails again.).TRANSCRIPT
-
How to transfer services from SNCP to MSP
Method 1: By sdh service configuration site by site
In SDH service configuration window, Right click the protection
services, Select Change to Normal Service, It can transfer SNC services to
Normal services.
Note: This function will keep the working route by default, protection route will be
deleted.
Method 2:transfer to normal services By trial function
Select Trail->SDH Trail Management->Maintenance->Modify
Port/Timeslot/Route->SNCP Setting, According to delete the working or protection
route, SNCP services can be transferred to Normal services.
Shown as below diagram:
-
Delete working or protection route:
Delete working route
Delete protection route
Set route
SNCP Services transferred to Normal service after deleting:
-
Attention: if transfer by trial function , it is required to
delete SNCP protection subnet firstly, and then search SNCP trails
again. (while you delete SNCP subnet, trails will be lost , so it is
required to search trails again.).
Example: Change SNCP to MSP ring
Step 1: Delete SNCP protection subnet;
Step 2: Transfer SNCP services to Normal services as above method;
Step 3: Create MSP protection subnet.
Step 4: Test MSP protection.
Diagram:
NE1 NE2
NE3NE4
11
8118
11
8
MSP RING
NE1 NE2
NE3NE4
11 8
11
8118
SNCP RINGDelete protection
services11
8
Attention: SNCP services probably occupy the time
slots of MSP protection path (N/2+K, N/2>= K >0), for
these services, It is required to reconfigured in working
timeslots of MSP in advance. ( After SNCP changed to
normal services, there will be many available empty
timeslots released.)