huawei optix rtn 950 (sharing knowladge).pdf
TRANSCRIPT
D00705767
Huawei Huawei OptiOptiXX RTN 950 RTN 950 Hybrid (TDM and Ethernet)Hybrid (TDM and Ethernet)
by using U2000 LCTby using U2000 LCT
Telkomsel Project
BridgeBridge--Based EBased E--Line ServicesLine Services
D00705767
Hybrid Microwave Description
The Hybrid microwave transmits native E1 services and native Ethernet services in hybrid mode. The Hybrid microwave supports the AM function.
When Ethernet services need to be transmitted over Hybrid microwave, you need to configure the Ethernet services between the FE/GE port on the Ethernet interface board and the IF_ETH port on the Hybrid IF board.
D00705767
Bridge-Based E-Line Services
FENODE-B
VLAN ID = 900
Network
Network
SITE A
SITE B
FE
PTN
RNC
FE
NODE-C
VLAN ID = 910
SITE C
D00705767
Board-PortGeneral Attributes Layer 2 Attributes
Enable Port Encapsulation Working Mode Tag
1-EM6T-3 Enable 802.1Q Auto-Negation Tag Aware
Software Configuration (Ethernet)
SITE A Port Attributes
Service ID 1
Service Name Node-B Site B
Direction UNI-UNI
BPDU Not Transparently Transmitted
Source Port 3-IFU2-1Source VLAN 900Sink Port 1-EM6T-3Sink VLAN 900
Port #3
E-Line Service
OSN
D00705767
Service ID 1
Service Name Node-B Site B
Direction UNI-UNI
BPDU Not Transparently Transmitted
Source Port 3-IFU2-1Source VLAN 900Sink Port 1-EM6T-3Sink VLAN 900
Software Configuration (Ethernet)
SITE B Port Attributes
Port #3
E-Line Service
Board-PortGeneral Attributes Layer 2 Attributes
Enable Port Encapsulation Working Mode Tag
1-EM6T-3 Enable 802.1Q Auto-Negation Tag Aware
Node-B
900
D00705767
1-16Sink Timeslot Range
VC4-1Sink VC4
1Sink Port
3-IFU2Sink
1-16Source Timeslot Range
-Source VC4
-Source Port
2-SP3SSource
BidirectionalDirection
VC12Level
Port Attributes
16E1
Software Configuration (E1 service for IUB Upgrade )
DDF