hydro-sanat-sharif co ltd the hssh introduction... 0098 21 88931347 [email protected]...

www.hssh.co.ir 0098 21 88931347 [email protected]

Hydro-Sanat-Sharif Co Ltd

The HSSH

The HSSH is active in the technical

fields including mechanics

(designing and manufacturing

Mechanical and hydraulic

systems), Electronics (electronics

and power), civil engineering and

co-operating with companies

active in import and export field, it

also has played a part in Iran`s

trade in the aforementioned fields

with other countries in the

harshest time of trade.

Company Profile

www.hssh.co.ir

[email protected]

+98-21-88931347

Unit 3, House Number 13, Mosiri Alleyway, Fatemi Sq

Tehran, Iran

http://www.hssh.co.ir/

mailto:[email protected]


bout the HSSH

Hydro-Sanat-E-Sharif (the HSSH) was formed by a group of experienced, respected and

graduates of greatest industrial universities of Iran and Middle-East to bring their

experience and knowledge together to set up a company which can contribute to the fast

growing young industry of Iran and make professional relationships with its counterparts

in other countries and the region.

The HSSH has been active in the technical fields including mechanics (designing and manufacturing

Mechanical and hydraulic systems), Electronics (electronics and power), civil engineering and co-

operating with companies active in import and export field, it also has played a part in Iran`s trade in

the aforementioned fields with other countries in the harshest time of trade.

Having the considerable experience as the designer and manufacturer, brought to the company by

the well-respected engineers and gained by the HSSH as a respectively newly formed company, and

owning a factory to produce and assemble various products, has made this company eligible and ready

to offer its service to various National and International companies and organizations.

The HSSH is proud to use the knowledge and experience of its staff having degrees as follows from

well-respected universities of Iran:

PHD in Mechanical Engineering

MS in Mechanical Engineering

BS in Mechanical Engineering

MS in Electronics Engineering

BS in Electronics Engineering

PHD in Civil engineering

BS in Civil Engineering

A


In addition to systematic implementation of projects, the HSSH is ready to co-operate with other

National and International organizations or companies in these fields:

1- Offering technical support and consultation, designing, maintenance, and supervision in the

field of hydraulic projects.

2- Offering technical support and consultation, designing, and supervision in the field of

producing various steel portable and fixed structures and supervision during their production.

3- Designing and producing electronic and control cabinet, Micro-Controllers, and PLC

4- Control systems and precision equipment

5- Designing, doing the technical supervision calculation, and implementing all kinds of civil

projects including steel and cement, construction, leveling and related activities.

6- Offering trade service to technical and industrial equipment, import and export. Acting as

distributor or retailer for manufacturers from all over the world through the channels and

experienced gained through hard work done by our staff and the company

7- Offering technical support, consultation, designing and implementation of projects in the field

of road equipment, including automobiles and the necessary changes needed to be done on

them to improve the efficiency of system.

8- Offering technical support, consultation, designing and implementation of projects in the field

of vibration, ventilation, and piping.

9- Designing and manufacturing agricultural machinery


1- Designing and manufacturing two mechanism complexes working with an asynchronous

engine which benefits a fixed and specified speed, and provides three outputs with 1 hertz

of frequency of the following specifications:

A: Having a phase variance of 90 degrees, the first and second output have two sweep

motions, motion scope of the first is ±15 and the number for the latter is between -4 and

+11

B: The third movement is a 60-round per minute fixed rotation.

C: All outputs are synchronized in a full mechanical manner.

2- Designing and manufacturing mechanical accessories of the structure and the hydraulic

elevation circuit for a 10-ton weight, employing a mechanical lock ability in three angels of 0,

20, and 30, and the ability to use modular valves to reduce the speed at the end of the lift to

be stopped by the redundant circuit

3- Designing and manufacturing azimuth movement mechanism for a for 12-ton weight with a

Lenze motor and driver and slew-bearing made by IMO, having a separate hydraulic lock

tolerating up to 40k newton meters of torque and featuring a position control accuracy of

0.1 degree.

4- Designing and manufacturing a hydraulic leveling system for a 32-ton truck, using

proportional hydraulic control valves, level precision done in a full automatic manner.

5- Designing and manufacturing the structure and elevation for a 10-ton load, using screw

mechanisms.

6- Designing and manufacturing hydraulic jacks to be used in erosive, sea and low temperature

environments.

7- Designing the parts and manufacturing a hydraulic circuit for a 2000-ton vessel with 25

actuators.

8- Designing and manufacturing a flushing system for cleaning 1500 meters of pipeline to reach

the cleanness level of NAS6.

9- Designing, manufacturing and installing some samples of shelter for trucks.

10- Designing and manufacturing electro-mechanic leveling systems for 17-ton trucks.


11- Designing and manufacturing 1 to 8 tons electro-mechanic jacks and 20 to 100 cm strokes.

12- Designing and manufacturing servo-mechanisms of 2 degrees of freedom to compensate the

movements of the vessel up to 0.2 precision and payload of 50 kg, having the minimum

appropriate weight for erosive sea environments.

13- Designing and manufacturing 2-degree of freedom simulators to heave the vessel with the

3RUS-PU parallel mechanism.

14- Designing and manufacturing 10 towable systems having suspension system, manual

leveling system and a two degree of freedom servo-mechanism with the capacity of 700kg.

15- Designing and manufacturing 8 gearbox systems with an instability/looseness of much

better than 0.1 degree and a 12cm diameter hollow axle.

16- Programming and setting up a mechanized stacker for one-tone load.

17- Designing and manufacturing various types of self-support and guyed towers for different

jobs as high as 34 meters.

18- Designing and manufacturing 600-tons hydraulic presses.

19- Modeling the puzzle-parkings.

20- Designing a Forming H device for straightening H beam after welding.

21- Designing and manufacturing bale square gathering, loading, and unloading machinery

22- Designing and manufacturing 20-ton power-packs and jacks, operative in temperature -40 to

+55. It has a reserve pump and a manual supplementary circuit.

23- Designing and manufacturing 32-ton hydraulic winches with brake power of 100 tones (the

main, and brake circuit)

24- Designing and manufacturing winches with various power capacity to be used in various

industries.


Trade Service

ince the beginning, the HSSH did not limit itself to design and manufacture projects in the field

of mechanics and hydraulics, but enjoying a technical team of mechanics and electronics

engineers cooperating with the marketing team, it tried to play a role in Iran's trade with other

countries. Unlike many traders who are professional only in trade and business, The HSSH

benefits the knowledge of its technical team supporting the marketing and sales department

in market analysis, planning, and offering technical support and help.

Our Sales and Marketing department's focus has been on three main objectives; expanding the market

for the HSSH products (Agriculture Machinery and hydraulics) in Iran and neighboring countries,

procuring equipment for Iranian companies, and preparing the ground to start acting as agent or

distributor for various foreign brands in different fields of mechanics, hydraulics, electronics and

energy sector, from small-size equipment to large-size heavy duty machinery.

The business situation in Iran and the region is going through a rapid change, Iran and the main powers

have reached a solutions for the long time dispute over nuclear and military disagreements and all the

trade, finance, insurance, energy and technology embargos on Iran will be lifted in coming months

and the next fiscal year will be a fresh start for our industry and trade. It can be a new page in our

relationship with other countries. Given the IranDeal reached in July 2015, we have a chance to start

doing business with the international community again, as all the sanctions will be gone by the

beginning of 2016. We are sure that in the post-sanction period, Iranian market will be the greatest

opportunity for foreign companies seeking market in the fast growing industry of Iran. We do not limit

ourselves to just manufacturing, and due to our experience in Iranian and the middle-eastern market,

and the contacts we have made here, and also our knowledge about the way business is done here in

Iran, we are eager to work with international companies, or act as their agent for sale or distributor in

the region or Iran. We are capable of offering technical supports, importing and exporting goods and

representing you in the way you always do business.

s


Wards and Certificates obtained

by the HSSH Company and its staff:

The HSSH was formed about two

years ago, but its engineers,

workers, members of the board,

and management staff have been working in

this field for many years, and they have

brought together their experience and

expertise to make the first steps on a long way

to expand the company, help the country's

industry and make good business and technical

relationship with companies from all over the

world.

Following is a number of awards, certificates

and licenses granted to the HSSH itself, or its

staff individually while studying or conducting

research programs.

ISO 9001:2008 Certificate for Quality Administration in Accordance with the requirements of the standards from

DER NUE WUNSCH inst.

Award of Exellence to one of board members, Mr S.A.Tahami for his project "Dynamic Analysis, Control

Design and Virtual Prototypes of a 6 Degrees of Freedom Parallel Stewart Robot", 2002

FESTO, Certificates of successful participation of MR H. Nomoradi, one of our Board members, in the course

"Introduction to Proportional Hydraulics PH711", 2010

A


FESTO, Certificates of successful participation of MR H. Nomoradi, one of our Board members, in the course

"Basic Programming of PLCS-PLC211", 2010

FESTO Certificate of attendance in" the Festo Automotive Seminar" for S.A.Tahami, 2006

Award for success in Designing and Manufacturing Electronic Vehicle in his team "Deraya" in 2008r (Written

and issues in Farsi, and signed by M.S Jabal-aameli, Iran University of Science and Technology's Manager)

SEECO Training Course Certificate in advanced ROBCAD Version 7.1.3 with EM-ARCWELDING, EM-LASER, EM-

PAINT, and EM-OLP Modules for Mr S.A.Taham (written and issued in Farsi)

Iran University of Science and Technology, Award for success in Designing and manufacturing "unnmaned boat"(RC Boat) by Mr H.Nomoradi, 2008 (written and issued in Farsi, signed by Mr Majid Abbaspour, Marine

Engineering group manager of Iran University of Science and Technology)


Hydro-Sanat-Sharif Co

The HSSH

www.hssh.co.ir

[email protected]

[email protected]

Phone: +98-21-88 93 13 47

Fax: +98-21- 88 89 45 30

Unit 3, House No 13, Mosiri Alleyway, Fatemi Sq

Tehran, Iran

http://www.hssh.co.ir/



hydro-sanat-sharif co ltd the hssh introduction... 0098 21 88931347 [email protected]...

Documents