imported domestic gas safety regulator€¦ · en16129 imported domestic gas safety regulator bs...

2
European Norm EN16129 IMPORTED DOMESTIC GAS SAFETY REGULATOR BS EN16129 High International Standard Safety Lock Auto-cut off Enchanced Grip 100% Tested Your Trusted Choice F R E N C H P R O D U C T F R E N C H P R O D U C T Safety At Its Best

Upload: others

Post on 15-Apr-2021

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: IMPORTED DOMESTIC GAS SAFETY REGULATOR€¦ · EN16129 IMPORTED DOMESTIC GAS SAFETY REGULATOR BS EN16129 High International Standard Safety Lock Auto-cut o˜ Enchanced Grip 100% Tested

European NormEN16129

IMPORTED DOMESTIC GAS SAFETY REGULATOR

BS EN16129

High International StandardSafety LockAuto-cut o�Enchanced Grip100% Tested

Your Trusted Choice

FRENCH PRODUCT

FRENCH PRODUCT

Safety At Its Best

Page 2: IMPORTED DOMESTIC GAS SAFETY REGULATOR€¦ · EN16129 IMPORTED DOMESTIC GAS SAFETY REGULATOR BS EN16129 High International Standard Safety Lock Auto-cut o˜ Enchanced Grip 100% Tested

COMeTINTEGRATED

SDN BHD502054 - M

No. 23, Jalan Gitar 33/3,Elite Industrial Park,Seksyen 33, 40350, Shah Alam, Selangor Darul Ehsan, Malaysia.Email: [email protected] Website: www.comet-integrated.com Contact: 603-5525 8287 Fax:603-5525 5287

GENERAL FEATURESSafety Cut O� Valve: Allows the regulators to automatic cut o� gas supply if the hose is accidentally disconnected or there is a leakage.

Enhanced Grip: A tight grip will securely lock the regulator on top of the LPG cylinder.

Child Safety Lock: Once installed, the regulator cannot be dismounted without pressing the release button.

100% Tested: During production, every regulator undergoes a leak test to ensure a 100% non-leak conformity.

IMPORTED DOMESTIC GAS SAFETY REGULATOR

Press down

PUSH

PUSH

Open

Close

Diagram 2 Follow the arrow guideline to open/close the regulator

PUSH

2. Push in

3. Pull up

1. Close

Diagram 3 To release, push in the release button andpull up the regulator.

Diagram 1To install, place the regulator over the gas cylinder and press downwards �rmly until you hear it clicking into position.

Inlet connection

Pressure

Capacity

20mm

30mbar

1.5kg/hr