PRODUCT MUST BE INSTALLEDACCORDING TO ALL APPLICABLE

BUILDING AND LIFE SAFETY CODES

[20.32].182

[15.52].611

[3.0]R.120

"A"

"A"

"A"

BEVEL

RADIUS

FLAT

CL

CL

CL

CL

CL

CL

FOR OPTIMUM LOCK PERFORMANCE, THE GAP BETWEEN THE DOOR AND FRAME MUST MEET INDUSTRY STANDARDS OF AN 1/8"

1.010- .000+.015

25.7 0+0.4

"A"

[40.48]1.594

[174.9]6.885

STILE PREPARATION

+.38 -.00

R.156[3.96]TYP.

+.005 -.000

4.635117.7

[1.5].06

.57014.5

5.375136.5

[36.5]1.437

[70.3]2.769

RADIUS WEATHER STRIP

RADIUS

FLAT

AVAILABLE FACEPLATES

Adjustable Mounting Tube Bracketmay be removed for mounting on bridges, tabs, or either methods.

CL

CL

CYLINDERCL

CL

DOORCL

TO JAMB EDGE

Drill and c'sk for#10-32 X 1/2"Flat Head Machine Screws

4581Cam Plug Assy.(included with 4300)

INSTALLATION

CL

4581FRONT VIEW

(Must use a Face Plate for installation)

"A".6215.7

.4210.6

6.81173

5.80147.3

1.58740.3

1.43736.5

2.76970.3

6.38162

.98024.9

.6315.9

1.0025.4

"B"

6.38162.1

CL

BACK OF STILE

2x#10-32

UNC-2B

Flat Face Plate can beadjusted for right or leftbeveled edge doors.Radius Weather Strip isoptional.

HOW BACKSETIS MEASURED

CAM TOLERANCE: ±.005 ( ±.13 )

CYLINDERCL

DIMENSIONSInches

(Millimeters)

Turning Key / Handle / PaddleDOES NOT pull Main Latch Assy.

OPERATION INSTRUCTIONPress Aux Latch to secureMain Latch. Turn key, applyvoltage, or operate Paddle/Handleto unlock Main Latch.As door opens, Main Latchpivots and collapses.

[20.32].182

[15.52].611

[3.0]R.120

Page of1 2

INSTALLATION INSTRUCTIONS

Rev. Appvd: MP ECN:11899 Date: 03/16/12 D

4300 SERIES ELECTRIFIED DEADLATCH

80-0180-421

Adams Rite Manufacturing Co.260 Santa Fe Street,Pomona, CA 91767

Phone: 909-632-2300Fax: 909-632-2369

www.adamsrite.com

PRODUCT MUST BE INSTALLEDACCORDING TO ALL APPLICABLE

BUILDING AND LIFE SAFETY CODES

Black = CommonWhite = N.O. contact (Dry)Red = N.C. contact (Dry)Unused wires must be cut such that no exposed wire will touch any metallic surface

EXAMPLE WIRING DIAGRAM WITH N.O. MONITORING

AccessControlSystem

X

4300MONITOR

Black

White

Red

4300 WIRING DIAGRAMINTERMITTENT / CONTINUOUS DUTY 12 / 24V DC

SOLENOID SPECIFICATION

SOLENOID AVAILABLE VOLTAGES 12V DC CONTINUOUS DUTY, 24V DC CONTINUOUS DUTY.

120V ACLINE

VOLTAGE

4605 / 4606 -24V AC40 VA TRANSFORMER

RED -

46032-AMP

RECTIFIER

RED -BLACK (-)

4300ELECTRIFIED DEADLATCH

WHITE (+)

ORANGE

BLUE

YELLOW

BROWN

12V DC

4300

4300

YELLOW

24V DC

ORANGE

BLUE

BROWN

Bevel Tab

Fig. 4

Yoke

#8-32 x 5/16"Truss Head Screw

Fig. 3

RHR BEVEL POSITION

LHR BEVEL POSITION

Fig. 5

Dim.Depth

Inside Stilewall

Fig. 1

Depth Dim.

3/16"Hex Key

MountingPlate

TubeSpacer

Fig. 2

FLAT FACE PLATENEUTRAL POSITION

Screwdriver

RemoveBevel Tabs

Fig. 6

RADIUS WEATHERSEALFACEPLATES ONLY

WIRES BUNDLE

VOLTAGEADAPTOR CABLE

4300 SERIESELECTRIFIED DEADLATCH

Fig. 7

MONITORING (OPTIONAL)

MONITORED DEADLATCH CONTAINS AN INTERNALLY MOUNTED SWITCH. THIS SWITCH IS ACTIVATED WHEN THE DOOR IS IN CLOSE POSITION. ALL UNUSED LEADS FROM THE MONITOR SWITCH MUST BE INSULATED.

Common contact - BlackNormally Open contact (N.O.) - WhiteNormally Closed contact (N.C.) - RedMaximum switching current - 0.1 Amps @ 125 VAC

- LOOP THE WIRES BUNDLE FROM 4300 ELECTRIFIED 'S SOLENOID UNDER AND AROUND ITS HOUSING AS SHOWN (Fig.7).- EXTEND THE WIRES RUN FROM THE POWER SOURCE AND THROUGH THE STILE PREPARATION.- CONNECT THE WIRE TO THE VOLTAGE ADAPTOR CABLE. - ATTACH VOLTAGE ADAPTOR CABLE TO 4300 WIRES BUNDLE AS SHOWN.

SOLENOID WIRING DIAGRAM

Note: NOT intend to be a Rex switch.

Page of2 2

INSTALLATION INSTRUCTIONS

Rev. Appvd: MP ECN: 11899 Date: 03/16/12D

4300 SERIES ELECTRIFIED DEADLATCH

80-0180-421

Adams Rite Manufacturing Co.260 Santa Fe Street,Pomona, CA 91767

Phone: 909-632-2300Fax: 909-632-2369

www.adamsrite.com