instrumentationelc-213 presentation by clifford t. johnson, pe, control systems engineer...
TRANSCRIPT
Instrumentation ELC-213
Presentation by Clifford T. Johnson, PE, Control Systems Engineer
Instrumentation and Control SystemsDocumentation
Today
Honeywell Chapter 5Honeywell Chapter 5
Chapter 10Standards & Regulations
The most important ( not the only one) is the ISA’s for the instrument person
Todays Assignment & Lab ELC-213
Assignment & LabAssignment & Lab
Standards & RegulationsHoneywell Controller Tuning
The classification code would be in the form of Class xx, Division xx, Group xx,
Standards and RegulationsStandards and Regulations
Standards ELC-213
The control system professional must adhere to many standards and regulations.
The following are the most important
•NEC National Electric Code•NFPA National Fire Protection Association•OSHA Occupational Safety and Health Admin•ANSI American National Standards Institute•The ISA International Society for Automation
•Formally the Instrument Society of America
Codes
NFPA 70 Electrical HazardsNFPA 70 Electrical Hazards
Codes ELC-213
The most important standard to follow that classifieselectrically hazardous areas is the following.
Hazard
Documents ELC-213
Process Safety InformationProcess Safety InformationDocuments required on hand by OSHA 29 CFR 1910.119
Process Safety Management of Highly Hazardous Chemicals
Regulation was developed after the 1984 Bhopal Chemical Plant disaster in India
On Hand
Procedures ELC-213
Operating ProceduresOperating ProceduresOSHA 29 CFR 1910.119 (f) requires the following
Documents to be prepared and implemented
Operation
Procedures ELC-213
Management for ChangeManagement for ChangeOSHA 29 CFR 1910.119 (I) Requires companies to have
written procedures to manage changes to documents
Change
Standards ELC-213
To Clarify FurtherTo Clarify FurtherStandard:
Recommended Practice:
Technical Report:.
Information on a specific subject developed by a number of unbiased experts in the field that should
be of interest to others
Information guidelines on a specific subject based on the best information at the time it was developed and subject to change as technology evolves
Guidelines that follow normal practice on a specific subject, they are unlikely to change. Developed by experts in the field
Clarification
Tuning ELC-213
Effects of Reset on controlEffects of Reset on control
Honeywell
This would be ideal
Set Point
Tuning ELC-213
Effects of rate on controlEffects of rate on control
Honeywell
With Just PB & Reset process went off set point
a lot
PB & Reset changed, then Rate had a good effect, process was kept close to set
point
Flow ELC-213
Flow Calibration
Flow Calibration
Calibration
We do not calibrate flow meters/transmitters in this class,
they are done in the advancedPCI-162 class.
Coriolis Meter: Linear, High accuracy, liquids only
Vortex Meter: Linear Medium Accuracy, Steam Flow
Mag Meter: Linear, liquids with solids, waste treatment
Flow ELC-213
Flow CalibrationFlow Calibration
Calibration
Differential Pressure (dp) Transmitter
Orifice Plate: Gas, Steam or Liquids
Low accuracy
Subjects Assignment ELC-213
Homework ASSIGNMENT Web LinkHomework ASSIGNMENT Web Link
Find an Download Calibration Principles to review and calibration form to bring to class; Find Acronym on
Internet for Software Engineering international standard on the web, email web page LINK only to me,
Email Ex:Email Ex: Johnson-Acronym- Johnson-Acronym-AD
All Emails Subjects and File names must haveAll Emails Subjects and File names must have
You will lose 1-3 points for incorrect subject
SubjectSubject::Your last Name-Subject-Assignment Date (AD)