Disclosure to Promote the Right To Information

Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information under the control of public authorities, in order to promote transparency and accountability in the working of every public authority, and whereas the attached publication of the Bureau of Indian Standards is of particular interest to the public, particularly disadvantaged communities and those engaged in the pursuit of education and knowledge, the attached public safety standard is made available to promote the timely dissemination of this information in an accurate manner to the public.

इंटरनेट मानक

“!ान $ एक न' भारत का +नम-ण”Satyanarayan Gangaram Pitroda

“Invent a New India Using Knowledge”

“प0रा1 को छोड न' 5 तरफ”Jawaharlal Nehru

“Step Out From the Old to the New”

“जान1 का अ+धकार, जी1 का अ+धकार”Mazdoor Kisan Shakti Sangathan

“The Right to Information, The Right to Live”

“!ान एक ऐसा खजाना > जो कभी च0राया नहB जा सकता है”Bhartṛhari—Nītiśatakam

“Knowledge is such a treasure which cannot be stolen”

“Invent a New India Using Knowledge”

है”ह”ह

IS 13865-2 (1994): Textile Machinery and Accessories -Packages of Yarns and Intermediate Products, Part 2: Formsof Winding [TXD 14: Machinery for Fabric Manufacture]

IS -13865 ( Part 2 ) : 1994 IS0 5238-2 : 1983

VW 2 @mT % PmT

Indian Standard

TEXTILE MACHINERY AND ACCESSORIES - PACKAGES OF YARNS AND INTERMEDIATE

PRODUCTS l

PART 2 FORMS OF WINDING

UDC 677’487’5

0 BIS 1994

BUREAU OF INDIAN STANDARDS MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG

NEW DELHI 110002

February 1994 Price Group 3

Machinery for Fabric Manufacture ( Excluding Knitting ) Sectional Committee, TX 14

NATIONAL FOREWORD

This Indian Standard which is identical with IS0 5238/2 : 1983 ‘Textile machinery and accesso- ries - Packages of yarns and intermediate products - Part 2 : Forms of winding’ issued by the International Organization for Standardization ( IS0 ) was adopted by Bureau of Indian Standards on the recommendation of the Machinery for Fabric Manufacture ( Excluding Knitting ) Sectional Committee and approval of the Textile Division Council.

Wherever the words ‘International Standard’ appear, referring to this standard, they should be read as ‘Indian Standard’.

Only the English language text of the International Standard has been retained while adopting it as Indian Standard.

In this Indian Standard, the following international standards are referred to. Read in their respective place the following:

International Standard

IS0 5238/l Textile machinery and acces- sories --- Packages for yarns and interme- diate products - Part 1 : Terminology

Indian Standard

IS 13865 ( Part 1 ) : 1993 Textile machinery and accesories - Package’s for yarns and intermediate products - Part 1 : Terminology ( Identical )

IS0 5239 Textile machinery and acces- IS 13866 : 1993 Textile machinery and accesso- sories - Winding - Basic terms ries - Winding - Basic terms

( Identical )

IS 13865 (Part 2) : 1994

IS0 5238-2 _: 1983

Indian Standard

TEXTILE MACHINERY AND ACCESSORIES - PACKAGES OF YARNS AND INTERMEDIATE

PRODUCTS

PART 2 FOF4MS OF WINDING

1 Scope and field of application

This part of IS0 5238 specifies forms of

winding suitable for winding yarns and

similar products (for example, tape

yarns, roving, sliver) onto tubes or

other formers. It may be applied to

spinning, twisting and winding

machinery as well as to other machines fitted with winding devices.

All forms of winding are a combination of the rotation of the package and the

lateral movement of the yarn relative to

the package.

NOTE - In addition to terms given in the

three official IS0 languages (English, French

and Russian), this part of IS0 5238 gives the

equivalent terms in German; these have

been included at the request of Technical

Committee ISO/TC 72, and are published

under the responsibility of the Member

Bodies for Germany, F.R. (DIN) and

Switzerland (SNV) who have verified the

correctness. However, only the terms given

in the official languages can be considered

as IS0 terms.

2 References

IS0 5238/l, Textile machinery and

accessories - Packages of yarns and

intermediate products - Part 1:

Terminology.

IS0 5239, Textile machinery and ac-

cessories - Winding - Basic terms.

3 Scheme for the winding

structure

The following diagrams are symbolic

only. The course of the yarn traverse is

variable according to the requirements.

1

IS 13865 (Part 2) : 1994

IS0 5238-2 : 1983 .

Reversal of direction

Traverse

0.0.1 .o

without

0.0.2.0

with’

Change of-stroke

0.0.1 .o 0.0.1.1

without constant

0.0.1.2

variable

0.0.2.0

without

0.0.2.1

constant

0.0.2.2

vanable

1.1.0.0

without t displacement

) 1.1.1.0 - - _ - -

1 .o.o.o

constant

2.1 .o.o

on one side

2.0.0.0

shortening --- 2.2.0.0

on both sides - -

_------L ew

3.1.0.0

on one side

_ _ 3.0.0.0 1;

lengthening r-!--F-t---

~______ 3.2.0.0

on both sides -

l For forms of winding with reversal of direction the symbolic diagrams show one cycle (to and fro). Thrc cycle and the course for the wIndIng strut ture without reversal of direction can recur continuously.

2

IS 13865 (Part 2) : 1994

IS0 5238-2 _z 1983

4 Forms of winding

No. Definition

Package according to IS0 5pell clause No. Presentation

.O.O.O Winding with constant traverse

.l.l.O without traverse displacement without reversal of direction

4.1.1.1

no change of stroke 4.1.1.2 4.1.2.1 4.1.2.2 4.1.23 4.1.3.1.1 a) 5.1.1 51.2 51.3 51.6 a

with accelerated reversal

1.2.1.0 constant traverse displacement without reversal of direction no change of stroke 4.1.4.1

4.2.1.1 4.2.2.1 4.2.2.2 4.2.2.3 4.2.3.1 4.2.3.2 4.2.4.1

1.2.2.0 constant traverse displacement with reversal of direction no change of stroke

4.2.2.1

2.0.0.0 Winding with traverse shortening

2.1.1.1 shortening on one side without reversal of direction constant change of stroke

4.1.3.2.1 a) and b)

IS 13865 (Part 2) : 1994

IS0 5238-2 : 1983

4.1.3.1.1 b)

No. Definition

Package according to IS0 5238/l clausa No.

Presentation

1.1.1.2 shortening on one side without reversal of direction variable change of stroke

4.1.3.1.1 b)

L1.2.1 shortening on one side with reversal of direction constant change of stroke

4.1.3.2.1 a) and b)

c

2.1.2.2 shortening on one side with reversal of direction variable change of stroke

2.2.1.1 shortening on both sides without reversal of direction constant change of stroke

4.1.1.3 al and b)

4.1.2.4 a) and b)

2.2.1.2 shortening on both sides without reversal of direction variable change of stroke

4.1.1.4 4.1.1.5 4.1.2.4 4.2.1.1

2.2.2.1 shortening on both sides with reversal of direction constant change of stroke

4.2.2.1

I I

4

IS 13865~(Part 2) : 1994

IS0 5238-2 : 1983

NO. Definition

Package according to IS0 5238/l clause No. Presentation

2.2.2.2 shortening on both sides with reversal of direction variable change of stroke

4.1.1.4

3.0.0.0 Winding with traverse lengthening

1.1.1 lengthening on one side without reversal of direction constant change of stroke

4.1.3.2.1 a) and b)

1.1.1.2 lengthening on one side without reversal of direction variable change of stroke

4.1.3.1.1 b)

1.1.2.1 lengthening on one side with reversal of direction constant change of stroke

4.1.3.2.1 a) and b)

3.1.2.2 lengthening on one side with reversal of direction variable change of stroke

4.1.3.1.1 bJ

3.2.1.1 lengthening on both sides without reversal of direction constant change of stroke

4.2.1 .l 4.2.2.1

IS 13885 (Part 2) : 1994

IS0 5238-2 : 1983 .

L

No. Definition

Package according to IS0 523811 clause No.

Presentation

3.2.1.2 lengthening on both sides without reversal of direction variable change of stroke

3.2.2.1 lengthening on both sides with reversal of direction constant change of stroke

4.1.5.1

z

3.2.2.2 lengthening on both sides with reversal of direction variable change of stroke

4.1.1.5

5 Description of forms of winding

WInding should be regarded as time- traverse-systems. An exact fixation of the winding system needs a description of the functional characteristics.

Therefore, the following data shall be specified :

a) type of machine;

b) type of traverse;

c) type of yarn;

d) type of former* (inner dia- meter x length) according to IS0 l +;

l The type of former affects the package, even in the case of equivalent forms of wind- ing.

l * Will form the subject of a future Interna- tional Standard.

8) speed of yarn;

f) winding length;

g) kind of package No. ac.

cording to IS0 5238/l;

h) characteristics of the winding

structure.

Plinted at Bee Kay Printers, New Dclti-110015, India

6

Bureau of Indian Standards

BIS is a statutory institution established under the Bureau of Indian Standards Act, 2986 to promote harmonious development of the activities of stadardization, marking and quality certification of goods and attending to connected matters in the country.

Copyright

BIS has the copyright of all its publications. No part of these publications may be reproduced in any form without the prior permission in writing of BIS. This does not preclude the free use, in the course of implementing the stanlard, of necessary details, such as symbols and sizes, type or grade designations. Enquiries relating to copyright be addressed to the Director ( Publications ), BIS.

Revision of Indian Standards

Amendments are issued to standards as the need arises on the basis of comments. Standards are also reviewed periodically; a standard along with amendments is reaffirmed when such review indicates that no changes are needed; if the review indicates that changes are needed, it is taken up for revision. Users of Indian Standards should ascertain that they are in possession of the latest amendments or edition by referring to the latest issue of ‘BIS Handbook’ and ‘Standards Monthly Additions’.

This Indian Standard has been developed from Dot : No. TX 14 ( 0232 ).

Amendments Issued Since Publication

Amend No. Date of Issue ____--

Text Affected

Headquarters:

BUREAU OF INDIAN STANDARDS

Manak Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi 110002 Telephones : 331 01 31, 331 13 75 Telegrams : Manaksanstha

( Common to all Offices )

Regional Offices : Telephone

Central : Manak Bhavan, 9 Bahadur Shah Zafar Marg [331 01 31

Eastern :

Northern

NEW DELHI 110002

l/14 C. I. T. Scheme VII M, V.. I. P. Road, Maniktola

CALCUTTA 700054

: SC0 445-446, Sector 35-C, CHANDIGARH 160036

Southern : C. I. T. Campus, IV Cross Road, MADRAS 600113

1 331 13 75

(37 84 99, 37 85 6’

I 37 86 26, 37 86 62

(53 38 43; 53 16 40

I 53 23 84

I 235 02 16, 235 04 42

~235 15 19, 235 23 15

Western : Manakalaya, E9 MIDC, Marol, Andheri ( East ) 632 92 95, 632 78 58

BOMBAY 400093 632 78 91, 632 78 92

Branch : AHMADABAD. BANGALORE. BHOPAL. BHUBANESHWAR. COIMBATORE. FARIDABAD. GHAZIABAD. GUWAHATI. HYDERABAD. JAIPUR. KANPUR LUCKNoW. PATNA. THIRUVANANTHAPURAM.

Printed at Printwell Printers, Aligarh, India