(For Drawer N&O packed in separate cartonwith hardware and assembly instructions.)

M.Gate Leg1 pc.

HARDWARE LIST

Caster2 with lock and2 without lock4 pcs.

Head Cap Bolt14 pcs. (+1 Extra)

Hex Wrench1 pc.

Cam Lock Screw4 pcs. (+1 Extra)

Pull Handle2 pcs.

Cam Lock4 pcs. (+1 Extra)

Machine Screw for Pull Handle4 pcs.

Wood Screw(for Caster & Gate Leg)22 pcs. (+2 Extra)

Adjustable Pin8 pcs. (+2 Extra)

Wood Plug10 pcs.(+2 Extra)

Kitchen Cart with Wood Bar

A.Top1 pc.

B.Side Frame L.

1 pc.

PART LIST

C.Side Frame R.1 pc.

F. Back Panel3 pcs.

G. Back Post2 pcs.

H. Front Post2 pcs.

I.Back Stretcher1 pc.

J.Front Stretcher1 pc.

K.Front Rail3 pcs.

L.Base1 pc.

N.KD. Drawer3 pcs.

O.KD. Drawer1 pc.

P.Shelf2 pcs.

Q.Side Rack

1 pc.

R.Side Rack1 pc.

T.Brush Chrome Pipes 3 pcs.

V.Round Arm

1 pc.

U.Handle Arm2 pcs.

E.Middle Frame R.1 pc.

D.Middle

Frame L.1 pc.

S.Base Rack1 pc.

Tools Required For Assembly : Philips screwdriver

Thank you for purchasing our quality products.Please carefully check the quantity of the parts and hardware. Please also read this assembly instructions until you understand clearly how to put the parts together, then start assembling step by step.

X.Door1 pc.

W.Door1 pc.

Assembly Instructions 2/4

STEP 1

STEP 2

STEP 3

J

L

E

L

F F F

K

K

K

DE

B

D

Attach 4 Casters to the underside of the Base (L), put the 2 Casters with lock in front as you first need to lock the cart from moving. (See sticker in the bottom indicating front side)

Put the Front Rail (K) in between the Middle Frame (D) and (E).

Attach the Side Frame (B) to the side of the unit with Head Cap Bolts.

Slide the Back Panels (F) into place.

Attach the Back Post (G) and Front Post (H) to the Middle Frame (D) and (E).

Attach the assembled Middle Frame (D) and (E) to the Base (L).

IMPORTANTDo not tighten up all the screws until each part is properly assembled.You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future.

G

D

H

STEP 5

STEP 4

STEP 6

STEP 7

Attach the Handle Arm (U) to the Side Frame (C) with Head Cap Bolts.

Slide the Round Arm (V) into place.

Attach the Gate Leg (M) at the rearand connect it to the unit with Wood Screws.

Attach the Back and Front Stretcher (I), (J) to the assembled unit with Head Cap Bolts.

Attach the Side Frame (C) to the other sideof the unit with Head Cap Bolts.

Assembly Instructions 3/4

J

C

I

M

S

T

T

T

U

U VC

Q

B

R

Attach the Side Rack (Q) to the Side Frame (B)with the Head Cap Bolts.

Attach the Brush Chrome Pipes (T) to the pre-drilledholes of Side Rack (Q).

Attach the Base Rack (S) to the Side Rack (Q).

Attach the Side Rack (R) to the Side Frame (B),using Head Cap Bolts.

Holding Gate Leg and rear frame with Wood Screw

Assembly Instructions 4/4

STEP 8

STEP 9

STEP 10

Place the Top (A) on the assembled unit.

Place the Cam Locks into the holes of the Side Frames (B) and (C). Make sure the Arrow sign on top. and tighten all the Cam Locks as to secure the Top with the body.

Insert the Adjustable Pins into the Side Frame (B), Middle Frame (D) and SideFrame (C), Middle Frame (E) at the desired level.

Place Shelf (P) into place.

A

P

WX

N

N

N

O

P

A

B

B

D E

C

C

Attach the Pull Handles to the Door (W) and (X) using the Machine Screws.

Attach the Door (W) and (X) to the Side Frame (B) and (C), slide the door lift hinges into the side frame lift hinges.

See Assembly Instructions for Drawersin the separate carton.

Slide the Drawers (N) and (O) into place.

Turn the Top (A) upside down and put the Cam Lock Screws to the pre-drilled holes.

Lift hinge Assembly

Pull Handle Assembly

See the “Arrow”on top

STEP 11

Cover all holes with Wood Plugs

Assembly Instructions

Unit Part List

N3.Side Part (L.)1 pc. for eachdrawer.

N4.Side Part (R.)1 pc. for each drawer.

N5.Base Part1 pc. for eachdrawer.

N2.Back Part1 pc. for eachdrawer.

N2

N2

N5

N5

N3

N4

N4

N4

N3

N3

N1

N1

N1

(Fig) 2

(Fig) 3

(Fig) 4Assemble the Pull Handle with Machine Screw onthe Front Part(N1).

(Fig)1

(Fig)2

(Fig)3(Fig)4

Turn the assembled drawer over and slide the Plywood Base Part (N5) into the grooveson Side Parts (N3) and (N4). Be sure to pushthe plywood all the way forward so it meets the Front Part (N1).

HARDWARE LIST

Pull Handle3 pcs.

Machine Screw for Pull Handle6 pcs.

1Wood Screw /”2

(for Bottom Part)18 pcs.(+1 Extra)

Wood Screw 1”(for Side Part)24 pcs.(+1 Extra)

Drawer

(Fig) 1Line up Side Parts (N3) and (N4)to the Front Part (N1) and Back Part (N2). Be sure to follow the ‘Arrow’ sign sticker on the parts.Using a Phillip’s screwdriver, insert 1” screwsinto each of the 4 pre-drilled holes on the side of (N3) and (N4), then tighten half way.

Insert the remaining (6) 1/2” screwsinto the pre-drilled holes in Base Part(N5), then tighten all screws

MAKE SURE ROLLERIS ON THE BACK

*

N1.Front Part1 pc. for eachdrawer.

Assembly Instructions

Unit Part List

O3.Side Part(L.)

1 pc.

O4.Side Part(R.)1 pc.

O5.Base Part1 pc.

O2.Back Part1 pc.

O2

O2

O5

O5

O3

O4

O4

O4

O3

O3

O1

O1

O1

(Fig) 2

(Fig) 3

(Fig) 4Assemble the Pull Handle with Machine Screw onthe Front Part(O1).

(Fig)1

(Fig)2

(Fig)3 (Fig)4

Turn the assembled drawer over and slide the Plywood Base Part (O5) into the grooveson Side Parts (O3) and (O4). Be sure to pushthe plywood all the way forward so it meets the Front Part (O1).

HARDWARE LIST

Pull Handle1 pc.

Machine Screw for Pull Handle2 pcs.

1Wood Screw /”2

(for Bottom Part)6 pcs.(+1 Extra)

Wood Screw 1”(for Side Part)8 pcs.(+1 Extra)

Drawer

(Fig) 1Line up Side Parts (O3) and (O4)to the Front Part (O1) and Back Part (O2). Be sure to follow the ‘Arrow’ sign sticker on the parts.Using a Phillip’s screwdriver, insert 1” screwsinto each of the 4 pre-drilled holes on the side of (O3) and (O4), then tighten half way.

Insert the remaining (6) 1/2” screwsinto the pre-drilled holes in Base Part(O5), then tighten all screws

MAKE SURE ROLLERIS ON THE BACK

*

O1.Front Part1 pc.