leak detector (ld) series

1
Copyright BlueTech Corporation. All Rights Reserved. LD-21.01S 1936 Star Batt Drive, Rochester Hills, MI 48309, USA E [email protected] W www.bluetechcorp.com LD - - Bx xx R1 - 1 NO/NC RELAY R2 - 2 NO/NC RELAY B0 - Detector Unit only B10 - Unit w/ 10 ft (3 m) sensing cable B20 - Unit w/ 20 ft (6 m) sensing cable B30 - Unit w/ 30 ft (9 m) sensing cable B50 - Unit w/ 50 ft (15 m) sensing cable B100 - Unit w/ 100 ft (30 m) sensing cable Ordering Information Product Description The LD Series is a water leak monitoring device constructed with a conductive-polymer technology & fluoropolymer construction sensing cable mechanically strong and resistant to corrosion and abrasion. Its sensing cables provide distributed leak and location over a wide range of areas such as data center subfloors, telecommunication rooms, electrical vaults, storage areas, tanks and roofs. The device provides a digital output signal for alarms in a residential or commercial monitoring systems. Detector Unit Specification Power Supply: 24 VAC +/- 10%, 24 VDC +/-10% Optional output: Relay form C, 10 A, 277 VAC rating Operating Conditions: -20° to 50° C, 15 to 95% RH. Enclosure Rating: IP65 Service Life Duration: > 5 years Wiring Connections: Screw terminal, 14 to 20AWG. Dimensions: 3.5 x 4.5 x 2.0 in (90 x 115 x 50 mm) Weight: 0.6 lbs (0.28 kg) Sensing Capable Characteristics Cable Diameter: 0.24 in (6 mm) Sensing wire: 2 X 30 AWG with jacket of conductive fluoropolymer Carrier: Fluoropolymer Cable Weight: 0.2 pounds per foot (30 grams per meter) Cable Color: High-visibility blue Breaking strength: 33 lbs (15 Kg) for Cable only Maximum continuous operating condition: 158 °F (70 °C) Fluids applicable for detection Water Base (Fresh/ Sea). Other liquid can be verified upon request. Performance Data Leak size to alarm: - Minimum of 1 inch (25 mm) liquid in contact at any point along sensing cable. Drying Time: - Cable dries and resets within 15 seconds after removal of liquid. Standard cleaning method: - Wipe with clean damp cloth. Maximum System’s Cable Length: - 1,000 Feet sensing cable Liquid Leak Sensor Leak Detector (LD) Series

Upload: others

Post on 22-Dec-2021

11 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Leak Detector (LD) Series

Copy

right

Blue

Tech

Cor

pora

tion.

All

Righ

ts R

eser

ved.

LD

-21.

01S

1936 Star Batt Drive,Rochester Hills, MI 48309, USA

E [email protected] W www.bluetechcorp.com

LD - -Bx xx

R1 - 1 NO/NC RELAYR2 - 2 NO/NC RELAY

B0 - Detector Unit onlyB10 - Unit w/ 10 ft (3 m) sensing cableB20 - Unit w/ 20 ft (6 m) sensing cableB30 - Unit w/ 30 ft (9 m) sensing cableB50 - Unit w/ 50 ft (15 m) sensing cableB100 - Unit w/ 100 ft (30 m) sensing cable

Ordering Information

Product DescriptionThe LD Series is a water leak monitoring device constructed with a conductive-polymer technology & fluoropolymer construction sensing cable mechanically strong and resistant to corrosion and abrasion. Its sensing cables provide distributed leak and location over a wide range of areas such as data center subfloors, telecommunication rooms, electrical vaults, storage areas, tanks and roofs. The device provides a digital output signal for alarms in a residential or commercial monitoring systems.

Detector Unit SpecificationPower Supply: 24 VAC +/- 10%, 24 VDC +/-10%Optional output: Relay form C, 10 A, 277 VAC ratingOperating Conditions: -20° to 50° C, 15 to 95% RH.Enclosure Rating: IP65Service Life Duration: > 5 yearsWiring Connections: Screw terminal, 14 to 20AWG.Dimensions: 3.5 x 4.5 x 2.0 in (90 x 115 x 50 mm)Weight: 0.6 lbs (0.28 kg)

Sensing Capable CharacteristicsCable Diameter: 0.24 in (6 mm)Sensing wire: 2 X 30 AWG with jacket of conductive fluoropolymerCarrier: FluoropolymerCable Weight: 0.2 pounds per foot (30 grams per meter)Cable Color: High-visibility blueBreaking strength: 33 lbs (15 Kg) for Cable onlyMaximum continuous operating condition: 158 °F (70 °C)Fluids applicable for detection Water Base (Fresh/ Sea). Other liquid can be verified upon request.

Performance Data

Leak size to alarm: - Minimum of 1 inch (25 mm) liquid in contact at any point along sensing cable.

Drying Time: - Cable dries and resets within 15 seconds after removal of liquid.

Standard cleaning method: - Wipe with clean damp cloth.

Maximum System’s Cable Length: - 1,000 Feet sensing cable

Liquid Leak Sensor Leak Detector (LD) Series