Mohamed Abd El Hamid Emam Abd El NabiSenior Electrical Engineer

Years of Experience: 11 Years

Education: B.SC. In Electrical Engineering from Cairo University Power & Electrical Machines Dept. May 2005

Courses: PMP project management professional Date of Birth: 7/6/1982

Current Location: Saudia Arabia – Al-Hasa Material Status: Married

Mobile: +966 540 850 297 Military Status: Exempted

E-Mail: eng.m.a.hamid@gmail.com midoo212@hotmail.com

Major Installations’ experience:

Generators, Oil Transformers, Dry transformers, Ring main units, MV switchgears, ATS, UPS, Grounding, Lightning, Bus ducts, MV/LV/LCU cabling, terminations & testing, Fiber cables installations, Lighting & Power, LV panel boards, MCC panels, Rectifiers & Batteries, Duct banks, Cable trays, EMT installations, Fire alarm, CCTV, Public address, Access control, IP telephone, Voice & data, Intercom, Interrogation system, Arm barriers, Road blockers, Sliding gates, Metal detectors, MATV system, Air handling units, Concealed & Split type A/C units, Pumps & Motors.

Major projects’ experience:

Buildings, infrastructure, tunnels, sewage/water pump stations & GSM.

Major skills:

Site supervision, Quantity surveying, Quality control, Shop drawing & As-built drawing preparation, and Load estimation.

Experience with SAUDI OGER LTD. (KSA)From: 14/2/2013 (Current)

Project: King Abdullah Project “KAP 1” (Amount around: 8 Billion Saudi Riyals)Position Held: Senior Electrical Engineer Main Responsibility: Acting as the Electrical Section Head for 8 sites in different locations out of the 305 site.Project’s Owner: Saudi Ministry of Interior.Project Description: The project comprises of 305 sites, distributed in different location, areas and regions of the Kingdom of Saudi Arabia with an approximiated total build up area: 1,349,405 m2.

Main responsibilities:- Responsible for following up subcontractors to ensure the work conformance to design and

projects’ specifications and ensuring that productivity within the planned.- Responsible for the material’s quantity surveying & preparing materials’ requests.- Ensuring that selection of approved material and ensuring the delivery as per the planned dates.

1

- Following up the delivery of materials with supplier/procurement team.- Responsible for monitoring/ controlling the cost of all electrical activities within the planed

budget.- Responsible for reviewing shop drawings and solving any contradiction between electrical

installations and other trades.- Planning and managing activities in terms of materials and manpower in order to achieve the

target dates.- Review and approve subcontractor invoices/claims according to actual productivity and

contract terms.- Preparing as built and red line drawings and submit to the consultant for approval.- Preparing SOL invoices as per actual quantities executed and following those invoices with all

the concerned persons until approval.- Interfacing between SOL, STC, SCECO and other governmental municipalities for any

connections required.-  Develop a comprehensive working knowledge and understanding of the contract documents

(including contract, plans, specifications, RFIs, submittals and applicable codes.)- Develop engineering procedures, including document control, submissions management,

creation and tracking of RFIs and material samples.- Ensure strict adherence to ethics and compliance requirements at all times.- Establish and maintain working relationships with owners, architects, consultants, trade

partners and vendors to ensure that the project-specific QA/QC Plan delivers a fully compliant project.

- Conduct all the High current and Low current systems testing and inspections and arrange for third-party testing and inspections if required, Analyzing and reporting the results.

- Participate in coordination meetings, Foreman’s meetings, Staff Meetings and periodic specific trade meetings.

- Following procedures & practices to ensure the implementation of contractual requirements to avoid and prevent any non-conformance to the contract.

Experience with ORASCOM CONSTRUCTION INDUSTRIESFrom: 16/5/2009 till 10/2/2013

Previous Project: Mivida – Roads and Infrastructure (3.8 Million Square Metres)Position Held: Senior Electrical Engineer and the section’s head.Project Description:-Owner: Emaar Misr.Project Manager: Turner International

Description: Construction of roads and all infrastructure networks (water, sewer, irrigation, gas, telecommunication, medium voltage, low voltage, distributer building, transformer buildings, tunnels, medium voltage and low voltage switchgears).

Job Description: Phase1:- Installation of a distributer medium voltage switchgear (16 cubicles, batteries, rectifier & AC/DC control system), 16 transformer buildings including (Ring main units air Type, dry transformers, Main Low Voltage distribution boards, lighting and power), duct banks, road crossings, telecommunication conduits’ network of length130 km, medium voltage network (22 /0.4 KV) of length of 53 km, low voltage network 51 km and street lighting network.

Managerial responsibilities:- Conduct technical / progress meetings with Emaar (Owner), project’s management,

supervision, cost & design consultants & OCI management to ensure that the project’s progress will be achieved within the target dates and take any necessary actions in this regards.

- Represent OCI for all electrical activities to decide whatever actions required.

2

- Interfacing between OCI and EDC (electrical distribution company) for materials’ factory tests, drawing and materials approvals, site works acceptance, testing, commissioning and startup until handing over the project.

- Interface between OCI & other contractors on site as per the interface scope and contract terms.

- Quoting any additional/extra work and preparing all tender documents for any arising bids.- Issuing claims in terms of cost & time for any delays or any arising problem preventing OCI

from achieving the planned schedule according to contract conditions. - Controlling and coordinating with all departments to expedite any process affecting

construction schedule.- Managing manpower / equipments on daily basis- Monitoring & controlling the cost of each activity to ensure it will be within the budget- Solving any technical problem may arise.

Previous Project: Uptown Cairo – Roads and Infrastructure (4.8 Million Square Metres)Position Held: Quality Control Engineer - ElectricalProject Description:-Owner: Emaar Misr.Project Manager: Turner InternationalConsultant: AAW (Ahmed Abdel Warith Consultant Group)

Description: Construction of roads and all infrastructure networks (water, sewer, irrigation, gas, telecommunication, medium voltage, low voltage, street lighting, transformer buildings, water tanks, and water and sewage pump temp. pump stations).

Job Description: Installation of 13 transformer buildings including (Ring main units air type, oil transformers, Bus ways, Main Low Voltage distribution boards, lighting and power), 6 outdoor kiosks, duct banks, road crossings, telecommunication conduits’ network, medium voltage network (11-22 /0.4 KV) for a length of 32 km, low voltage network 45 km, street lighting network 30 km, MCC Panels for water and sewer pump stations and all other electrical activities.

Responsibilities: Supervision for all electrical activities related to the infrastructure scope of work. Preparing methods of statements for any electrical activities according to national regulations, technical specifications and international standards. Supervision for all materials’ (transformers, cables & Panels) factory tests before delivery according to specs and international standards. Performing all site tests to ensure compliance with specifications, customer requirements and international standards. Revise shop drawings and field sketches. Revise material requisitions to ensure that the quantities selected are accurate for the site construction and according to the specs and drawings. Making quantity surveying for materials before requisitions. Overseeing quality control and safety matters on the site, and ensuring that regulations are adhered to. Interface between OCI, Owner (Emaar), Electrical Distribution Company, Project Manager (Turner) and the Consultants and other Contractors onsite during site construction process. Solving any unexpected technical difficulties and other problems that may arise. Planning the work and efficiently organizing the plant and site facilities in order to meet agreed programs of deadlines. Supervise technical staff on a day-to-day and determining workloads and schedules.

3

Experience with other firmsFirm: Mobiserve Holding Co. From: 3/12/2006 till 15/5/2009

Position Held: Senior Electrical EngineerJob Description: Responsible for the installation of the BTS Base Transceiver Site, BSC Base Station Controllers including cable trays, ducts, and shelters, PCM cables, Power Cables, DDF termination, AC, Control Panels, Power Panels, Generators, Grounding System, Feeders, Antennas, Outdoor Units and all in-door activities.Responsibilities: Inspect completed installations to ensure conformance to design and equipment specifications and compliance with operational and safety standards. Compile data and write reports regarding existing and potential projects. Oversee project production efforts to assure projects are completed satisfactorily, on time and within budget. Preparing Quotations, As Built, Sweep tests, tendering documents, technical and financial offers for arising bids.

Experience with other firmsFirm: Crown Home for Electromechanical Consulting From: 1/7/2005 till 3/12/2006

Position Held: Electrical Design & load estimation Engineer Work details: Electrical power distribution system design including:1- Low Voltage & Low current networks design. 2- Lighting design including illumination levels3- Load estimation and preparing calculation sheets.

Training Experience:1- In 2003 in El-Giza for Fire Alarm Systems.2- In 2003 in Egypt Air.3- In 2004 in ELMACO Transformers Factory.4- In 2004 In Cairo Oil Refining Company.

Training Courses:1- BTS & Mobile Networks Protocol in the National Telecommunication Institute (NTI).2- OSHA (Occupational health and safety administration).3- PMP project management professional.4-

Computer Skills:1- AutoCAD all versions (2D).2- Calculux & Dialux (For Lighting Design).3- Microsoft Office and Internet.4-

Other skills: Has the ability to work on all the Bases either shifts or normal, full time or part time, have good Social Communication skills. Teamwork Player. Writing Reports and Memos in English and Arabic.

4