management using supply chain cost · 2020-01-29 · oracle scm cloud using supply chain cost...
TRANSCRIPT
Oracle SCM Cloud
Using Supply Chain CostManagement
20A
Oracle SCM CloudUsing Supply Chain Cost Management
20APart Number F24564-02Copyright © 2011, 2020, Oracle and/or its aliates. All rights reserved.
Authors: C Fehily, Pratap Paleti
This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected byintellectual property laws. Except as expressly permied in your license agreement or allowed by law, you may not use, copy, reproduce, translate,broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering,disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free. If you nd any errors, please reportthem to us in writing.
If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, thenthe following notice is applicable:
U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware,and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal AcquisitionRegulation and agency-specic supplemental regulations. As such, use, duplication, disclosure, modication, and adaptation of the programs,including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to licenseterms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.
This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for usein any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware indangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safeuse. Oracle Corporation and its aliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.
Oracle and Java are registered trademarks of Oracle and/or its aliates. Other names may be trademarks of their respective owners.
Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks orregistered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarksof Advanced Micro Devices. UNIX is a registered trademark of The Open Group.
This software or hardware and documentation may provide access to or information about content, products, and services from third parties. OracleCorporation and its aliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, andservices unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its aliates will not be responsiblefor any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicableagreement between you and Oracle.
The business names used in this documentation are ctitious, and are not intended to identify any real companies currently or previously in existence.
Oracle SCM CloudUsing Supply Chain Cost Management
Contents
Preface i
1 Introduction 1Overview of Cost Management .................................................................................................................................................. 1
Supported Cost Methods ............................................................................................................................................................. 1
Time Zone Seings ...................................................................................................................................................................... 2
Overview of Importing Cost Data .............................................................................................................................................. 2
Web Services You Can Use to Integrate Cost Management ............................................................................................... 3
2 Receipt Accounting 5Overview of Receipt Accounting ............................................................................................................................................... 5
Considerations for Accrual Seings ......................................................................................................................................... 6
Receipt Accounting Tasks and Accounting Events ............................................................................................................... 6
Receipt Accrual, Reconciliation, and Clearing ........................................................................................................................ 9
Receipt Accrual Clearing Rules ................................................................................................................................................ 10
Receipt Accounting Cuto Dates ............................................................................................................................................. 14
Overview of Accrual Reversal ................................................................................................................................................... 15
Close a Receipt Accounting Period ......................................................................................................................................... 15
Cost Management for Internal Material Transfers .............................................................................................................. 17
Receipt Accounting for Outside Processing .......................................................................................................................... 18
Receipt Accounting for Manual Procurement of Items for Work Orders ........................................................................ 19
Receipt Accounting for Drop Shipments ............................................................................................................................... 19
Global Procurement ................................................................................................................................................................... 20
Receipt Accounting Examples .................................................................................................................................................. 25
Overview of Reports and Analytics for Receipt Accounting ............................................................................................. 117
FAQs for Receipt Accounting .................................................................................................................................................. 118
Oracle SCM CloudUsing Supply Chain Cost Management
3 Cost Planning 121Cost Planning Process .............................................................................................................................................................. 121
Create a Cost Planning Scenario ............................................................................................................................................ 123
Create Standard Costs ............................................................................................................................................................. 124
Upload Standard Costs Using ADFdi .................................................................................................................................... 125
Import Standard Costs Using File-Based Data Import ...................................................................................................... 125
Create Resource Rates ............................................................................................................................................................. 126
Cost Analysis .............................................................................................................................................................................. 127
Publish Costs .............................................................................................................................................................................. 127
FAQs for Cost Planning ........................................................................................................................................................... 127
4 Cost Accounting 129Overview of Cost Accounting ................................................................................................................................................. 129
Scheduled Processes for Cost Accounting .......................................................................................................................... 130
Cost Accounting Process Flow ............................................................................................................................................... 130
Cost Accounting Periods .......................................................................................................................................................... 132
Cost Processing ......................................................................................................................................................................... 136
Global Procurement .................................................................................................................................................................. 156
Cost Accounting Examples ..................................................................................................................................................... 178
Oracle Project Portfolio Management Cloud Integration ................................................................................................ 254
Overview of Reports and Analytics for Cost Accounting ................................................................................................. 256
Analyze Inventory Valuation .................................................................................................................................................. 257
FAQs for Cost Accounting ...................................................................................................................................................... 257
5 Landed Cost Management 261Overview of Landed Cost Management .............................................................................................................................. 261
Landed Cost Management Tasks ......................................................................................................................................... 262
Trade Operations ...................................................................................................................................................................... 262
Landed Cost Charges .............................................................................................................................................................. 264
Trade Operation Templates ................................................................................................................................................... 264
Create Estimate Landed Costs .............................................................................................................................................. 264
How You Enable an Invoice for Landed Cost Processing ............................................................................................... 266
Create Actual Landed Costs ................................................................................................................................................... 266
Charge Invoice Association Status ....................................................................................................................................... 267
Upload Trade Operation Charges in a Spreadsheet ......................................................................................................... 268
Analyze Landed Costs ............................................................................................................................................................. 268
FAQs for Landed Cost Management ................................................................................................................................... 269
Oracle SCM CloudUsing Supply Chain Cost Management
6 Appendix: Events and Cost Accounting Distributions 271Overview of Cost Accounting Distributions ......................................................................................................................... 271
Inventory Transaction Events ................................................................................................................................................. 271
Purchasing Events .................................................................................................................................................................... 293
Sales Events ............................................................................................................................................................................... 306
Work in Process Events .......................................................................................................................................................... 307
Cost Adjustment Events ........................................................................................................................................................... 311
Consigned Material Events ..................................................................................................................................................... 314
Oracle SCM CloudUsing Supply Chain Cost Management
Oracle SCM CloudUsing Supply Chain Cost Management
Preface
i
PrefaceThis preface introduces information sources that can help you use the application.
Using Oracle Applications
HelpUse help icons to access help in the application. If you don't see any help icons on your page, click your user imageor name in the global header and select Show Help Icons. Not all pages have help icons. You can also access the OracleHelp Center to nd guides and videos.
Watch: This video tutorial shows you how to nd and use help.
You can also read about it instead.
Additional Resources
• Community: Use Oracle Cloud Customer Connect to get information from experts at Oracle, the partnercommunity, and other users.
• Training: Take courses on Oracle Cloud from Oracle University.
ConventionsThe following table explains the text conventions used in this guide.
Convention Meaning
boldface Boldface type indicates user interface elements, navigation paths, or values you enter or select.
monospace Monospace type indicates le, folder, and directory names, code examples, commands, and URLs.
> Greater than symbol separates elements in a navigation path.
Oracle SCM CloudUsing Supply Chain Cost Management
Preface
ii
Documentation AccessibilityFor information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website.
Videos included in this guide are provided as a media alternative for text-based help topics also available in this guide.
Contacting Oracle
Access to Oracle SupportOracle customers that have purchased support have access to electronic support through My Oracle Support. Forinformation, visit My Oracle Support or visit Accessible Oracle Support if you are hearing impaired.
Comments and SuggestionsPlease give us feedback about Oracle Applications Help and guides! You can send an e-mail to:[email protected].
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 1Introduction
1
1 Introduction
Overview of Cost ManagementCost Management is a cost accounting solution that helps companies to eectively manage their product costing,manufacturing, and inventory accounting business ows. The solution enables companies to maintain multiple costbooks and nancial ledgers to beer meet external regulatory reporting and internal management reporting needs.It reduces manual cost maintenance tasks by providing automated rules-based engines and ecient cost processorstuned for high volume transaction environments.
Cost Management and related features are covered in the documentation listed in the following table.
Functional Area Documentation
Cost accounting
See the Cost Accounting chapter of the Using Supply Chain Cost Management guide.
Receipt accounting
See the Receipt Accounting chapter of the Using Supply Chain Cost Management guide.
Landed cost management
See the Landed Costs chapter of the Using Supply Chain Cost Management guide.
Intercompany transactions andintracompany ows
See the Using Supply Chain Financial Orchestration guide.
Subledger accounting for the Frenchmarket
See the Implementing Subledger Accounting for France chapter of the ImplementingManufacturing and Supply Chain Materials Management guide.
Fiscal document capture for theBrazilian market
See the Using Fiscal Document Capture guide.
Reports and analytics
See the Creating and Administering Analytics and Reports for SCM guide.
Related Topics
• Viewing Analytics and Reports
• Overview of Cost Accounting
• Overview of Subledger Accounting for France
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 1Introduction
2
Supported Cost MethodsThe cost methods used to cost your transactions are congured using the Manage Cost Proles task in the Setup andMaintenance work area. You can use multiple cost methods in your cost proles. The following table describes thesupported cost methods.
Cost Method Description
Standard
Inventory is valued at a predetermined standard value. You track variances for the dierencebetween the standard cost and the actual transaction cost, and you periodically update thestandard cost to bring it in line with actual costs.
Actual
Tracks the actual cost of each receipt into inventory. When depleting inventory, the processoridenties the receipts that are consumed to satisfy the depletion, and assigns the associatedreceipt costs to the depletion.
Perpetual Average
The average cost of an item, derived by continually averaging its valuation after each incomingtransaction. The average cost of an item is the sum of the debits and credits in the inventorygeneral ledger balance, divided by the on-hand quantity.
Time Zone SeingsThe transaction date of inventory and manufacturing transactions determines the accounting date and period in whichthose transactions are booked. If your application administrator has enabled the legal entity time zone feature, thenthe transaction costs are accounted using the organization's legal entity time zone. The dened time zone is used indetermining the accounting date and accounting periods. It is used for displaying Cost Management dates such asthe cost date, general ledger date, currency conversion date, period end validation date, cost cuto date, and costadjustment date. If the legal entity time zone feature is not enabled, then the server time zone is used for displayingdate elds. The time zone dened in the User Preferences is used for the Transaction Date, and overrides the legalentity time zone and the server time zone for this date eld.
Related Topics• About This Guide• How can I set general preferences for myself• Set Up Legal Entity Time Zones
Overview of Importing Cost DataYou can use le-based data import to integrate Cost Management with external systems. Use the Standard Costs le-based data import template to import standard costs from external sources into the Cost Accounting work area. Youcan view the imported cost data on the Manage Standard Costs page. For more information on le-based data import,
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 1Introduction
3
see the chapter on Standard Costs Import in the File Based Data Import guide for Oracle Supply Chain ManagementCloud.
Related Topics
• Import Standard Costs Using File-Based Data Import
Web Services You Can Use to Integrate CostManagementOracle Supply Chain Management Cloud provides REST web services you can use to access data stored in Supply ChainManagement Cloud and to construct integrations to other systems. The following table describes some of the REST webservices provided for Cost Management integration tasks.
Task Description REST Service Name
Retrieve receipt transaction costs
Retrieve item cost details of purchaseorder and internal receipt transactions, bycalling a REST web service. The retrievedreceipt transaction cost details can beused in conjunction with cloud or third-party applications to create analyticalreports, or as inputs for other REST webservices, such as the Cost AdjustmentsREST web service.
Receipt Costs
Manage cost accounting overhead rules
Create, update, or delete Cost Accountingoverhead rules by calling a REST webservice. You can create a new overheadrule, or update an existing overhead rule,by specifying rule details such as rulename, transaction type, item category,eectivity date, and overhead rate.
Overhead Rules for Cost Accounting
Create receipt and layer cost adjustments
Create receipt cost adjustments and costlayer adjustments using a REST webservice. This capability is useful when youneed to create cost adjustments for a largenumber of previously received items. Youcan, for example, adjust the receipt cost ofitems to factor in the rebated amounts ofsupplier rebates. Using this REST serviceyou can adjust receipt costs, receipts withzero cost, and receipt layer costs. It can beused in conjunction with other services,such as the Receipt Costs REST service.
Cost Adjustments
Manage landed cost trade operations
Create, update, or delete landed cost tradeoperations and associated charges usinga REST web service. Automatically createtrade operations when integrating with anexternal system or when dealing with a
Landed Cost Trade Operations
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 1Introduction
4
Task Description REST Service Name
high volume of trade operations or a highvolume of charges.
For the full list of REST web services available for Cost Management, see the guide REST API for Oracle Supply ChainManagement Cloud.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
5
2 Receipt Accounting
Overview of Receipt AccountingOracle Fusion Receipt Accounting is used to create, manage, review, and audit purchase accruals. It includes thefollowing features:
• Create Receipt Accounting Distributions. Create accounting distributions for receipts of accrue at receiptpurchase orders.
• Review Receipt Accounting Distributions. Review the accrual accounting distributions created by receiptaccounting for purchase order transactions, such as receipts, returns, corrections, and matches of uninvoicedreceipts to purchase orders. You can also review the accounting distributions created by receipt accounting fordeliveries that are expensed rather than stored as inventory.
• Manage Accrual Clearing Rules. Dene business rules for the automatic clearing of balances in the purchaseorder accrual accounts, set the conditions for each rule, and set the order in which rules must be applied.
• Match Receipt Accruals. Match purchase order receipt accruals with invoices from the payables application.
• Clear Receipt Accrual Balances. Automatic clearing of accrual balances based on predened rules.
• Review Receipt Accrual Clearing Balances. Review the General Ledger accounted accrual balances on a periodicbasis.
• Adjust Accrual Clearing Balances. Review uncleared accrual balances and perform adjustments. Manually adjustor clear accrual balances to inventory valuation for accounts not covered by automatic clearing rules, or reversesuch clearing adjustments.
• Run reports and analytics for Receipt Accounting. The reports available include the following:
◦ Accrual Clearing
◦ Accrual Reconciliation
◦ Uninvoiced Receipt Accrual
◦ Receipt Accounting Period Close
◦ Landed Costs
Note: You can run the Create Receipt Accounting Distributions, Match Receipt Accruals, and Match ReceiptAccruals process jobs for either all your business units or for a selected business unit. If you want to triggerthese jobs using the ERP integration service, ESS web service, or job sets then use the following job denitions:
Job Name ESS Job Denition
Create Receipt AccountingDistributions
ReceiptAccrualProcessMasterEssJobDef
Match Receipt Accrual
MatchReceiptAccrualMasterEssJobDef
Clear Receipt Accruals AccrualClearRulesMasterEssJobDef
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
6
Job Name ESS Job Denition
Related Topics• Accrual Reversals
Considerations for Accrual SeingsThe key policy decision that you need to make for receipt accounting is whether or not you want to accrue at receipt.The following table outlines the points to consider for each accrual option.
Accrual Seing Points to Consider
Accrue at Receipt
• Purchases are accrued at receipt. An accrued liability account is credited when thegoods are received.
• Optional for expense destination purchases, and mandatory for inventory purchases.• More accounting and more reconciliation than when accruing at period end. The receipt
accounting application provides tools to help reconcile the accrued liability clearingaccount.
• Accounting is more timely than when accruing at period end.
Accrue at Period End
• The accounts payable account is credited when the supplier invoice is processed inaccounts payable. Receipt accounting has a function to accrue uninvoiced receipts atperiod end.
• Less accounting and less reconciliation than when accruing at receipt.• Accounting may be less timely than when accrued at receipt, but will be accrued by
period end.
The accrual options are congured in the Procurement oering. For more information on conguring the accrualoptions, see the related topics section.
Related Topics• Guidelines for Common Options for Payables and Procurement• How Purchase Order Schedule Defaults Work
Receipt Accounting Tasks and Accounting EventsUse Receipt Accounting to:
• Create accruals for purchase order receipts that are expensed or shipped to inventory.
• Create accruals for intercompany trade ows.
• Create receipt inspection accounting for purchase order and interorganization receipt ows.
• Support budgetary control and encumbrance accounting
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
7
Receipt Accounting also has tools to help you reconcile the accrual clearing accounts as the accruals are oset by theaccounts payable accounting when invoices are processed.
Receipt Accounting Tasks and Accounting EventsThe following table describes the Receipt Accounting tasks and processes to support receipt, inventory, andmanufacturing accounting, and the sequence in which the tasks should be executed.
Task Navigation Resulting Events
Transfer receipt transactions and taxdeterminants from Receiving to ReceiptAccounting.
Scheduled Processes work area >Schedule New Process > TransferTransactions from Receiving to Costing
• All receiving transactions aretransferred from the Receivingapplication to the ReceiptAccounting application, along withthe tax determinants and relatedinformation that is present onreceipts.
• Receipt transactions are thenready in the Receipt Accountingapplication for further processing.
Transfer accounts payable transactionsfrom Payables to Receipt Accounting.
Scheduled Processes work area >Schedule New Process > Transfer Costs toCost Management
• All payable invoices that areaccounted are transferred from theAccounts Payable application to theReceipt Accounting application.
• Payable Invoices are then ready inthe Receipt Accounting applicationfor further processing.
Create accounting distributions forreceipts of accrue at receipt purchaseorders.
Receipt Accounting Work Area > CreateReceipt Accounting Distributions
• Accruals for all types of purchases• Accrual accounting distributions
at the time of receipt or return ofgoods and services
• Trade accrual distributionsfor global procurement,interorganization transfers, andcross-business unit shipments tocustomers
• Accounting distributions forexpense destination deliveriesof purchases marked for accrualat receipt. These purchases aretypically for services procurement,one-time item purchases, andexpense usage purchases.
• Accounting distributions for invoicevariances for IPV, ERV, TRV, TERV,and TIPV
• Staging of variances into receivinginspection for subsequent washby the inventory and expenserevaluation processes
• Accounting distributions forinventory and expense revaluations
• Tax amounts are recalculatedfor all receipt transactions. Taxes
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
8
Task Navigation Resulting Events
are calculated by calling the Taxapplication programming interface.
• Tax accounting distributions• Budgetary control and
encumbrance accounting. You canenable and perform budgetarycontrol, encumbrance accounting,or both. Budgetary control andencumbrance accounting areoptional tasks, and are enabled inFinancials.
Create period end uninvoiced receiptaccruals.
Receipt Accounting work area > CreateUninvoiced Receipt Accruals
• Provisional expense accruals forpurchases not marked for accrual atreceipt
Create subledger accounting. Receipt Accounting work area > Create
Accounting
• Journal entries for receiptaccounting distributions
Review accrual distributions and taxcalculations.
Receipt Accounting work area > ReviewReceipt Accounting Distributions
• Review accrual distributions and taxcalculations.
Clear receipt accruals. Receipt Accounting work area > Clear
Receipt Accrual Balances
• Automatic clearing of accrualbalances based on predened rules
• Staging of information forrevaluation of inventory andexpenses by cost accounting andreceipt accounting processes
Generate and view reconciliation reports. Scheduled Processes work area >
Schedule New Process > AccrualReconciliation report
Scheduled Processes work area >Scheduled Processes > Accrual Clearingreport
• Accrual Reconciliation report• Accrual Clearing report
Create receipt accounting distributions. Receipt Accounting work area > Create
Receipt Accounting Distributions
• Accounting distributions for clearedaccrual balances
• Revaluation and expenseadjustment entries for invoicevariances or accrual clearing eventsthat modify acquisition costs forpurchases
Review uncleared accrual balances andperform adjustments.
Receipt Accounting work area > AdjustReceipt Accrual Balances
• Staging for manual intervention forexceptions of high material value
• Manual accrual clearing• Manual adjustments and
reversals of prior accrual clearingadjustments
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
9
Task Navigation Resulting Events
• Automatic creation of accountingdistributions for these adjustments
Match purchase order receipt accrualswith invoices from payables.
Receipt Accounting work area > MatchReceipt Accruals
• Manual reconciliation of accrualbalances
• Review and audit accrual balancesthat were nal accounted.
Review accrual clearing balances. Receipt Accounting work area > Audit
Receipt Accrual Clearing Balances
• Audit the General Ledgeraccounted accrual balances on aperiodic basis.
Related Topics
• Accrual Reversals
Receipt Accrual, Reconciliation, and ClearingWhen goods are interfaced from Receiving to Oracle Fusion Receipt Accounting, Receipt Accounting recognizes theliability to the supplier, and creates accruals for receipts destined for inventory or expense. For consigned purchases,the supplier accrual is booked upon change of ownership.
Receipt Accounting then reconciles these accrual balances against the corresponding invoices from accounts payableand clears them to inventory valuation.
The following discusses receipt accruals, their reconciliation, and clearing.
Receipt Accrual CreationWhen goods are received and delivered to inventory or expense destinations, the receipt accounting application createsaccrued liability balances for the estimated cost of purchase order receipts. The application creates accruals for:
• Inventory destination receipts, which are always accrued on receipt
• Expense destination receipts, which are accrued on receipt, or at period end if the supplier invoice has not yetbeen processed
When it processes the supplier invoice, Accounts Payable creates the actual supplier liability and osets the accrualbalances. The accrued liability account typically has high volumes of entries going through it, and may have remainingbalances that must be justied if the account payable invoice has not yet been processed; or if the Account Payableinvoice has been processed, any remaining balance must be resolved and cleared. Receipt Accounting provides tools tohelp with this reconciliation.
Receipt Accrual Reconciliation and ClearingSome of the remaining balance in the accrued liability account can be automatically cleared by Receipt Accountingand Cost Accounting to the appropriate purchase expense or asset account, based on your predened clearing rules.However, some of this balance will represent uninvoiced quantities, or other discrepancies which you will want toresolve and clear manually.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
10
Example 1: Assume that the purchase order receipt is for 100 units at $5 each; the application creates a credit to theaccrued liability account in the amount of $500. When the corresponding invoice arrives from the supplier, it reects100 units at $6 each; the application debits the accrued liability account in the amount of $600. The dierence of $100automatically clears and ows to inventory valuation.
Example 2: Assume that the quantity received is 99.4, and the quantity on the supplier invoice is 100. The processordoes not always know if that is the nal invoice or if more invoices are pending for the uninvoiced quantity. If smallvariations are normal, you can set up rules to automatically clear small variations, while large variations are veriedmanually. If there is a predened rule for the treatment of such a discrepancy, the application automatically clears thedierence to inventory valuation. However if no such rule exists, then you must clear it manually.
Audit Receipt Accrual Clearing BalancesAfter accrual balances are cleared to the appropriate expense or asset account, you can review and audit the nalaccounting distributions generated by Receipt Accounting.
Receipt Accrual Clearing RulesDene accrual clearing rules to clear accrual balances automatically. Accrual balances are often of unknown origin andunpredictable. With accrual clearing rules you can specify when accrual balances should be cleared and wrien o. TheClear Receipt Accrual process scans for applicable rules on the transactions, and clears the balances when rule criteriaare met.
The following discusses the creation of accrual clearing rules using predened aributes, and illustrates the results withan example.
Predened AributesThe following table describes the aributes that are available in the Accrual Line tree in the Conditions browser:
Aribute Name Description
CmrPODistributionID
Purchase order structure is based on the hierarchy of purchase order header > purchase orderline > purchase order schedule > purchase order distribution. The accounting for purchaseorder transaction is at the lowest level of purchase order distribution. The accrual and chargeaccount codes are dened at this level. Invoices are matched and accrual is oset at the POdistribution level. This aribute represents the PO distribution ID on the PO document.
Percentage Over-Invoiced
At each purchase order distribution level, receipt accounting tracks the original orderedquantity, total received quantity, and total invoiced quantity. Percentage Over-Invoiced Quantity represents the condition: IF (Net Rct qty - Invoice Qty) < 0then ABS(NetRecptQty - InvoiceQty)/ NetRecptQty
Percentage Uninvoiced
At each purchase order distribution level, receipt accounting tracks the original orderedquantity, total received quantity, and total invoiced quantity.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
11
Aribute Name Description
Percentage Uninvoiced Quantity represents the condition: IF (Net Rct qty - Invoice Qty) > 0then ABS(NetRecptQty - InvoiceQty)/ NetRecptQty
PO Status
Status of the purchase order document. If the PO status is Finally closed, then it is treated asClosed. For all other PO statuses, you can dene the accrual clearing rules.
PO Match Option
Invoice match option dened on the purchase order schedule. It can be PO or Receipt.
Invoice Age
Days or time since the latest invoice was recorded for a purchase order distribution.
Receipt Age
Days or time since the latest receipt was recorded for a purchase order distribution.
Over-Invoiced Quantity
When the invoiced quantity is greater than the ordered quantity, it represents thedierence between the two: IF (Net Rct qty - Invoice Qty) < 0 then Over Invoiced Quantity =ABS(InvoiceQty - NetRecptQty)
Under-Invoiced Quantity
When the invoiced quantity is less than the ordered quantity, it represents the dierencebetween the two: IF (Net Rct qty - Invoice Qty) > 0 then Under Invoiced Quantity =ABS(NetRecptQty - InvoiceQty)
Percentage PO Accrual Amount
The balance in the accrual account for a PO distribution divided by the accrual value for theordered quantity: Sum(accruals in CMR and AP)/PO amount PO amount = Net Order Qty * PO Price
Accrual Clear Amount
Absolute value of balance in an accrual account for a PO distribution.
AP Accrual Amount
Absolute value of balance (net of invoices and debit memos) in an accrual account in PayablesSubledger for a PO distribution.
CMR Accrual Amount
Absolute value of balance (net of receipts, corrections and returns) in an accrual account inReceipt Accounting Subledger for a PO distribution.
Supplier
Supplier name on the purchase order document.
Supplier Site
Supplier site code on the purchase order document.
Item
Item on the purchase order line.
Item Category
Item category on the purchase order line.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
12
ExampleThis example illustrates the distributions for a purchase order with associated receipts and invoices.
The following table describes the purchase order details:
PO Header Supplier Supplier Site Status
PO#1234
Advanced Network Devices
New York
Open/ Close/Final Close
The following table describes the purchase order lines:
Item Item Category PO Price Ordered Quantity
AS54888
Raw Materials
100 USD
100 EA
The following table describes the purchase order schedules:
Schedule Order Quantity Match Option Status
1
100 EA
Order or Receipt
Open
The following table describes the receipts and invoices:
Receipts Ordered Quantity ReceivedQuantity
Invoiced Quantity Accrual Account Status
Receipt 1
60
58
55
01-2210
Open
Receipt 2
40
40
45
01-2220
Open
The following table describes the purchase order distributions and accrual balances:
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
13
PODistribution
CMRAccrualAmount(A)
APAccrualAccount(B)
AccrualClearAmount(C) = (A-B)
Under-InvoicedQuantity
Over-InvoicedQuantity
PercentageUnder-Invoiced
PercentageOver-Invoiced
PercentagePOAccrualAmount(C)/OrderedQuantity*POPrice
Distribution1
58*100USD =5800 USD
55*100USD =5500 USD
300 USD
60 - 55 = 5
NotApplicable
5/58*100= 8.62%
NotApplicable
300USD/60*100= 5%
Distribution2
40*100USD =4000 USD
45*100USD =4500 USD
(500) USD
NotApplicable
45-40 = 5
NotApplicable
5/40*100= 12.50 %
500USD/40*100= 12.50 %
The following table describes the Rule 1:
Aribute Operator Value Conditions
PO Status
=
OPEN
And
Percentage Under-Invoiced
Less Than
10%
Not Applicable
Results: The PO Status and the Percentage Under-Invoiced values meet the criteria of Rule 1; therefore the accrualbalance of 300 USD is automatically cleared.
The following table describes the Accrual Amounts Cleared Based on Rule 1:
PODistribution
CMRAccrualAmount(A)
APAccrualAccount(B)
AccrualClearAmount(C) = (A-B)
Under-InvoicedQuantity
Over-InvoicedQuantity
PercentageUnder-Invoiced
PercentageOver-Invoiced
PercentagePOAccrualAmount(C)/OrderedQuantity*POPrice
Distribution1
58*100USD =5800 USD
55*100USD =5500 USD
300 USD
60 - 55 = 5
NotApplicable
5/58*100= 8.62%
NotApplicable
300USD/60*100= 5%
The following table describes the Rule 2:
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
14
Aribute Operator Value Conditions
PO Status
=
OPEN
And
Accrual Clear Amount
Less Than
Absolute (1000) USD
Or
Percentage Under-Invoiced
Less Than
10%
Or
Percentage Over-Invoiced
Less Than
10%
Not Applicable
Results: The PO Status, Percentage Under-Invoiced, and Accrual Clear Amount Absolute values meet the criteria of Rule2; therefore the accrual balances of 300 USD and (500) USD are automatically cleared.
The following table describes the Accrual Amounts Cleared Based on Rule 2:
PODistribution
CMRAccrualAmount(A)
APAccrualAccount(B)
AccrualClearAmount(C) = (A-B)
Under-InvoicedQuantity
Over-InvoicedQuantity
PercentageUnder-Invoiced
PercentageOver-Invoiced
PercentagePOAccrualAmount(C)/OrderedQuantity*POPrice
Distribution1
58*100USD =5800 USD
55*100USD =5500 USD
300 USD
60 - 55 = 5
NotApplicable
5/58*100= 8.62%
NotApplicable
300USD/60*100= 5%
Distribution2
40*100USD =4000 USD
45*100USD =4500 USD
(500) USD
NotApplicable
45-40 = 5
NotApplicable
5/40*100= 12.50 %
500USD/40*100= 12.50 %
Receipt Accounting Cuto DatesThe accrual cuto date enables you to control when backdated receipts are accounted.
The following describes how Receipt Accounting uses oset days to determine the accrual cuto date for processingbackdated receipts.
Using Oset DaysOset days dene the grace period for processing backdated transactions in the prior GL period. You can indicate thenumber of oset days for a business unit in the Receipt Accounting work area, on the Manage Accrual Clearing Rulespage, Manage Accrual Cuto Rules tab. Receipt Accounting uses the oset days to calculate the accrual cuto date.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
15
For example, assume the number of oset days is 3, then the accrual cuto date for processing receipts in the OctoberGL period is November 3:
• A receipt that is backdated to October 31 but is processed on November 3 is accounted in October
• A receipt that is backdated to October 31 but is processed on November 4 is accounted in the November GLperiod
If the oset days are not dened, then the backdated receipts are processed in the prior GL period until the period isclosed.
Overview of Accrual ReversalUse the Create Accrual Reversal Accounting process in the Scheduled Processes work area to reverse accrual journalentries. You can schedule this process to run automatically at predened intervals, or run it on demand. You can denehow and when accrual reversals are automatically performed by:
• Indicating that an accounting event is eligible for accrual reversal.
• Determining when the accrual is reversed.
• Scheduling the Create Accrual Reversal Accounting process to generate the reversal entries.
For more information on accrual reversal, prerequisites, and step-by-step instructions, see the links in the RelatedTopics section.
Related Topics
• Accrual Reversals
• How You Submit the Create Accrual Reversal Accounting Process
• Submit Scheduled Processes and Process Sets
Close a Receipt Accounting Period
VideoWatch: This video tutorial shows you how to process receipt accruals in preparation for the closing of a receipt accountingperiod. It also shows you how to schedule receipt accounting processes to run automatically. The content of this video isalso covered in text topics.
ProcedureThis procedure shows you how to process receipt accruals in preparation for the closing of a receipt accounting period.You can schedule Receipt Accounting to automatically process receipts that are set to be accrued on receipt. If receiptsaren't marked for automatic accrual on receipt, you can run the Create Uninvoiced Receipt Accruals process. This willaccrue all receipts that aren't yet invoiced in Accounts Payable.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
16
You can access the following Receipt Accounting processes in the Scheduled Processes work area:
• Transfer Costs to Cost Management
• Transfer Transactions from Receiving to Costing
• Accrual Clearing Report
• Accrual Reconciliation Report
• Create Accrual Reversal Accounting
You can access the following Receipt Accounting processes in the Receipt Accounting work area:
• Create Receipt Accounting Distributions
• Clear Receipt Accrual Balances
• Create Uninvoiced Receipt Accruals
• Create Entries for Receipt Accounting
• Match Receipt Accruals
You can schedule the processes, or you can run them on demand.
This procedure covers the following tasks:
• Transferring Cost Data to Receipt Accounting
• Creating Receipt Accounting Distributions
• Creating Uninvoiced Receipt Accruals
Transferring Cost Data to Receipt AccountingThis task covers processes that should be run in the Scheduled Processes work area before closing a receipt accountingperiod.
To transfer cost data to Receipt Accounting, complete the following steps.
1. From the Navigator menu, select Scheduled Processes.2. Select the processes that you want to run or schedule. The following receipt accounting processes should be
completed before closing a receipt accounting period:
◦ Transfer Costs to Cost Management. This process transfers invoice information to Receipt Accounting.
◦ Transfer Transactions from Receiving to Costing. This process transfers receipt information to ReceiptAccounting.
3. Review the Status column to conrm that the processes have completed successfully.
Creating Receipt Accounting DistributionsThis task creates receipt accounting distributions in preparation for the closing of a receipt accounting period. You canschedule this process, or run it on demand.
To create receipt accounting distributions, complete the following steps.
1. Navigate to the Receipt Accounting work area, and select the Create Receipt Accounting Distributions task.2. To run the receipt accounting processes for all the business units that you have access to, leave the Bill-to
Business Unit empty. However, if you want to run them only for a particular business unit, select it from the Bill-to Business Unit drop-down list.
Note: When you run this process, the application creates one master job and a child job for each ofthe prot center BU that's associated with the Bill to Business Unit.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
17
3. Click on the Schedule tab, and select the option Run Using a Schedule.4. Complete the Frequency, Start Date, and End Date elds, and click Submit.5. From the tasks menu, select the Review Receipt Accounting Distributions task to view the receipt accounting
distributions that were created.6. On the Review Receipt Accounting Distributions page, search for transactions that have a Transaction Status of
Final Accounted and a Transaction Type of Receipt into Receiving Inspection.7. Click on the Distributions tab, and click the Detach buon to view the details on a new page.8. Click on the Journal Entries tab to view the journal entries for the accounting distributions. Click the Detach
buon to view the details on a new page.
Creating Uninvoiced Receipt AccrualsIf receipts aren't marked for automatic accrual on receipt, you can run the Create Uninvoiced Receipt Accruals process.This will accrue all receipts that aren't yet invoiced in Accounts Payable. You can run this job more than once during theperiod close process. At a minimum it should be run after the Accounts Payable period is closed and all the AccountsPayable invoices are interfaced to Cost Management, and before the General Ledger period is closed. For period endaccrual, the accounted date always falls on the last date of the period selected.
You can specify a cuto date within the accounting period for accounting purposes. Then, period end accrual foruninvoiced receipts is created on the cuto date. This enables you to ensure that when you have multiple ledgers withdierent calendar period end dates, the period end accrual is booked in the same period that they're accrued.
When you have a primary general ledger and multiple secondary ledgers with dierent calendar periods, do thefollowing:
• If there are two ledgers running on dierent calendar period end dates, choose the lesser period end date asthe cuto date. For example, if the secondary ledger ends on the 27th day of the month and the scal ledgerends on the 30th day, choose the 27th day as the cuto date.
• If you're specifying a cuto date, ensure that it's set to a date that's before the period end date. Else, you will geterrors.
• If you have congured the application to automatically reverse and post in general ledgers, the reversalaccounting entries are automatically posted to the journals. However, if you haven't opted for automaticreversal, you must manually reverse the period-end accrual that was already booked and post it in the nextperiod. For more information about conguring automatic reversal in general ledgers, see the Oracle FinancialsCloud Using General Ledger guide on the Oracle Help Center.
• Once the accounting period is closed, in all ledgers, move the cuto date to a date that's in the next period.
To create uninvoiced receipt accruals, complete the following steps.
1. Navigate to the Receipt Accounting work area, and select the Create Uninvoiced Receipt Accruals task.2. On the Create Uninvoiced Receipt Accruals page, complete the Bill-to Business Unit and Accounting Period
elds.3. Select a Period End Accrual Cuto and Accounting Date. If you don't select any date, the last date of the
accounting period is taken as the cuto and accounting date.4. Click Submit.5. On the Review Receipt Accounting Distributions page, search for transactions with a Transaction Type of Period
End Accrual.6. Scroll down and select the Distributions and Journal Entries tabs to view the accounting details.
Related Topics• Accrual Reversals• Oracle Fusion Subledger Accounting Predened Reports
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
18
Cost Management for Internal Material TransfersCost Management supports receipt accounting and cost accounting for requisition based internal transfers for itemsgoing to either an expense or an inventory destination, with or without a receipt at the destination.
Self-Service Procurement, Supply Chain Financial Orchestration, and Cost Management have been integrated toprovide an estimated transfer price based on the internal cost of the items on the requisition. A transfer price is requiredon the internal material transfer requisition line for approval, budgetary control, and encumbrance accounting.
Cost Management supports requisition-sourced transfer orders going to expense destinations with multipledistributions and dierent expense accounts. Based on the account dened at the distribution level, Cost Managementwill book the expense for the appropriate account. In the case of transfers to expense destinations where a receipt is notrequired, new logical receipt and delivery transactions are created in Cost Management, similar to the physical eventscreated with receipt expense destination transfers when a receipt is required. Budgetary control and encumbranceaccounting are supported for expense destination internal transfer orders.
Budgetary ControlYou can ensure that budget funds are available before a requisition for an internal transfer is submied for approval.Depending on your budgetary control conguration, the funds will be reserved either at the time the requisition issubmied for approval, or when the requisition is approved. Insucient funds override rules and approvers can becongured as part of budgetary control setup. Cost Management liquidates the commitment and books an expenditureat the time of delivery when a receipt is required, or at the time of shipment by creating a virtual receipt when thereceipt is not required. The Requisition for Internal Material Transfer transaction subtype has been added to enablebudgetary control of requisitions for internal material transfers.
Encumbrance AccountingEncumbrance accounting entries are created for transactions subject to budgetary control and encumbranceaccounting when the Create Accounting process is run. Cost Management liquidates the reserve for the encumbranceaccount and creates journal entries for the actual expense value.
Receipt Accounting for Outside ProcessingReceipt Accounting supports manufacturing outside processing, where one or more work order operations areoutsourced to a supplier who provides specialized manufacturing services. Outside processing transactions areaccounted in Receipt Accounting under the Destination Type of Manufacturing.
Accounting Distributions Created for Outside ProcessingCost Accounting supports the Purchase Order Receipt into Manufacturing transaction type for the costing of outsideprocessing items delivered to Manufacturing. The transaction processing depends on the cost method, as follows.
• Actual or Average cost method. The purchase price multiplied by the number of items received is added to thework in process valuation.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
19
• Standard cost method. The standard cost multiplied by the number of items received is added to the workin process valuation. The dierence between the purchase price and the purchase order is accounted as apurchase price variance.
Related Topics
• How Outside Processing Costs are Planned, Accounted, and Reviewed
• How Items Are Set Up for Outside Processing
Receipt Accounting for Manual Procurement of Items forWork OrdersReceipt Accounting supports creating accruals and processing of purchase order receipts for items directly procuredfrom a maintenance or manufacturing work order and are received against the Work Order destination type.
Accounting Distributions for Manual Procurement of Items for WorkOrdersFor all purchase orders with the Work Order destination type, these accounting entries are created for the Receipttransaction.
Accounting Line Type Transaction Type
Receiving Inspection
Debit
Accruals
Credit
Receipt Accounting for Drop ShipmentsGlobal drop shipment is an order fulllment strategy where the seller does not keep products in the inventory. Theseller relies on suppliers or contract manufacturers to build, store, and ship orders to the customers. When a customerplaces an order for a drop shipped product, the seller issues a purchase order for the item. The seller also providesinstructions to the suppliers to ship directly to the customer. The supply chain nancial orchestration process routes theorchestration ow of drop shipments through one or more business units within the corporation. These business unitscan belong to the same legal entity or may occur across legal entities.
The nancial ow starts when the supplier sends the advanced shipment notice, or when the supplier matches theinvoice with the purchase order for the drop shipment. The ow creates cost accounting distributions and intercompanyinvoices for the ownership transfers that occur between parties, including supplier, one or more organizations, and thecustomer. Supply Chain Financial Orchestration sends a request to the receiving system to create a drop ship receipton the supplier invoice that references the purchase order. Receiving creates a logical receipt, and then noties OrderManagement to start customer billing. This automation helps to reduce billing cycle time.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
20
Receipt Accounting Distributions for Drop ShipmentsYou can review the receipt accounting distributions for drop shipments on the Review Receipt Accounting Distributionspage. The following accounting line types are created for drop shipment events.
Event Application Source Accounting Line Type Transaction Type
Drop Ship Receipt
Receiving
Receiving Inspection
Debit
Drop Ship Receipt
Receiving
Accrual
Credit
Global Procurement
Overview of Global Procurement Trade AccountingCompanies often design their legal structure for nancial eciency as well as eciency in the physical ow of goodsthrough the supply chain. Typically, the most optimal nancial movement of goods is dierent from the most optimalphysical movement of goods. For example, the purchase requisitions from a group of subsidiary companies could berouted through a single international purchasing company who deals with the suppliers. As a result, the legal ownersof the purchasing organizations will be dierent from the legal owners of the receiving organizations. This form ofpurchasing is known as global procurement.The following discusses:
• Global procurement trade ows
• Trade agreements and accounting rule sets
• Agreements converted to purchase orders
• Commonly used terms
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
21
Global Procurement Trade FlowsThis gure illustrates a typical global procurement trade ow, in this case between a US corporation and its Chinasupplier. The US corporation has a central procurement business unit which creates trade agreements and purchaseorders on behalf of its subsidiaries.
China Supplier US Corporation
Procurement Business Unit
US IncReceiving Legal
EntityChina Ltd
Sold-to Legal Entity(Purchasing Affiliate)
US EastReceiving Profit
Center Business Unit
OwnershipChangeEvent
PhysicalFlow
CN BUChina Sold-to Profit
Center Business Unit
M1US Receiving
Inventory Organization
M2US Receiving
Inventory Organization
OwnershipChangeEvent
US West Receiving Profit
Center Business Unit
ManagementFlow
CN INV ORGChina Purchasing
Trade Organization
The China supplier drop ships the goods directly to the US receiving inventory organization M1. However for legal andaccounting purposes, the trade ows from the China supplier through the China sold-to legal entity (China Ltd), to theUS receiving legal entity (US Inc). For management and prot tracking purposes, the trade ows from the China sold-toprot center business unit CN BU to the US receiving prot center business unit US West.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
22
Financial Trade Agreements and Accounting Rule SetsA trade agreement denes the parties in the trade relationship. In this example the trade agreement is between the UScorporation and the China supplier, and it denes the buying, selling, sold-to, and receiving legal entities, prot centerbusiness units, inventory organizations, and trade organizations.
The accounting rule sets dene source documents and accounting that is required in the legal and nancial ow, alsoknown as the ownership change event ow. A rule set is associated with a nancial route, and nancial routes can havedierent accounting rule sets.
The following illustrates a trade agreement setup for the US corporation:
• Agreement #: GP001
• Type: Procurement
• Supplier Ownership Change: ASN (Advance Shipment Notice)
• Primary Trade Relationship #: PTR1
• Sold-to Legal Entity: China Ltd.
• Sold-to Business Unit: CN BU
• Deliver-to Legal Entity: US Inc.
• Deliver-to Business Unit: US West
• Financial Trade Relationship #: FTR1
• From Legal Entity: China Ltd.
• From Business Unit: CN BU
• From Organization: CN INV ORG
• To Legal Entity: US Inc.
• To Business Unit: US West
• To Organization: M1
• Prot Tracking: Yes
• Invoicing: Yes
• Obligation Currency: CNY
• Rate Type: Corporate
• Transfer Pricing: Purchase Order - 10%
• Purchase Order/Sales Order: No
Trade Agreement Converted to Purchase OrdersThe trade agreement is used to create purchase orders. The following illustrates a purchase order created under the USCorporation trade agreement # GP001:
• Document Type: Purchase Order
• Document #: PO-GP001
• Document Line #: 1
• Document Line Detail: 1.1
• Document Line Distribution #: 1.1.1
• Item: SFO-CST_ASSET
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
23
• Quantity: 100
• UOM: Each
• Currency: CNY
• Price: 650
• Sold-to Legal Entity: China Ltd.
• Trade Organization: CN INV ORG
• Deliver-to Organization: M1
• Primary Trade Relationship #: PTR1
Global Procurement Common TermsThe following table describes the terms commonly used in global procurement trading:
Terms Denitions and Rules
buy-sell relationship
Relationship between two business units where one acts as a buyer and the other as a sellerof goods or services. The seller records the revenue, cost of sale, and receivables. The buyerrecords the payables and inventory or expense. A buy-sell trade between internal businessunits is seled through the transfer price.
asset item
Inventory item where the cost of acquisition is valued as an asset on the balance sheet. Theinventory cost is expensed when it is consumed or sold.
expense item
Inventory item whose cost of acquisition is booked as an expense.
transfer price
The unit price that one business unit charges another for goods or services traded within theenterprise. The transfer price is typically based on the price list, cost plus or minus, or purchaseprice plus or minus.
nancial route
Designates how nancial transactions are seled, can be dierent from the physical route, andmay involve one or more intermediary nodes. The intermediary nodes are internal businessunits that are not part of the physical supply chain transaction but are part of the nancialroute.
Incoterms
A series of sales terms in international trade, used to dene the rights and obligations ofthe trade partners with respect to the delivery of goods sold. Incoterms are used to dividetransaction costs and responsibilities between buyer and seller, and to reect transportationpractices.
intercompany prot and loss
The internal prot or loss arising out of trade among business units in the enterprise. Theseinternal prots and losses are used for internal management but are typically eliminated whenproducing the enterprise consolidated nancial statements for external stakeholders.
intercompany trade
The trade of goods and services between organizations belonging to dierent legal entitieswithin a conglomerate.
intracompany trade The trade of goods or services between two internal organizations within a legal entity.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
24
Terms Denitions and Rules
ownership change event
The transfer of title of goods and services from one party to another. This results in accountingand the creation of nancial documents such as Accounts Receivable and Accounts Payableinvoices.
price list
Contains the basic list information and pricing aributes for items or product groups.
pricing option
A method to compute the transfer price based on cost, source document price, or price list.
prot center
A business unit that operates with its own income statement and reports to the legal entity.
purchasing trade organization
The inventory organization reporting to the sold-to legal entity identied in the purchaseorder. This organization is used for cost accounting the transactions in the sold-to legal entity.
qualiers
Business aributes of a supply chain document or transaction that determine the applicabilityof the trade agreement.
supply chain nancial orchestrationagreement
An agreement between the legal entities, business units, and trade organizations of acorporate group. The agreement denes the parties in the trade relationship and the nancialselement process.
trade distributions
Subledger entries created by Oracle Fusion Receipt Accounting and Oracle Fusion CostAccounting for Oracle Fusion Supply Chain Financial Orchestration trade transactions.
procurement business unit
Has central responsibility for the creation of trade agreements and purchase orders on behalfof legal entities and business units under the holding company.
Prot Center Business Units and Bill-to Business UnitsOracle Fusion Receipt Accounting and Oracle Fusion Cost Accounting create accounting distributions for tradetransactions in the supply chain. These accounting distributions are associated with two kinds of business units: protcenter business units and bill-to business units.
The following explains the dierent business units associated with trade transactions and the assumptions used toderive them.
Prot Center Business UnitA prot center business unit reports to a single legal entity and is responsible for measuring the protability ofinventory organizations under that legal entity. All trade transactions are associated with a prot center business unitwhich, in turn, is derived from the inventory organization that owns the trade transaction. Cost Accounting uses theprot center business unit to process all inventory transactions.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
25
Bill-to Business UnitA bill-to business unit is used to process receipt accruals in a trade transaction, and is the same business unit thatprocesses the invoice in Accounts Payable. For supplier accruals, the bill-to business unit is derived from the purchaseorder. For intercompany accruals, the bill-to business unit is derived from the prot center business unit.
Related Topics
• How Cost Organizations, Inventory Organizations, and Cost Books Fit Together
Review Item Cost and Global Procurement Trade TransactionAccountingReceipt Accounting and Cost Accounting process and create accounting distributions for trade transactions in thesupply chain.
The following explains how to review the results of global procurement trade transactions processed by ReceiptAccounting and Cost Accounting.
Receipt Accounting ResultsIn the Receipt Accounting work area, access the Review Receipt Accounting Distributions page. On this page you canview accounting details by Source Document Number and Source Document Line Number. Source documents arepurchase order schedules, transfer orders, and sales orders.
Cost Accounting ResultsIn the Cost Accounting work area:
• Access the Review Item Costs page. On this page you can view a breakdown of the cost of items, costcomparisons of items across organizations, and cost trends over time.
• Access the Review Cost Accounting Distributions page. On this page you can view accounting details of tradetransactions by Reference Document Number.
Related Topics
• Review Item Costs
Receipt Accounting Examples
Example of Consigned Inventory Accounting in a Simple PurchaseOrderWhen an organization receives a shipment of goods under a consignment purchase order, the ownership of the goodsremains with the supplier even after they are in the custody of the buyer. Ownership passes from the supplier to thebuyer when the inventory is consumed.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
26
When the inventory is consumed, two events occur: First there is a transfer of ownership to the buyer and the consignedgoods become owned inventory for a brief period of time, then the owned inventory is depleted.
The following example illustrates:
• The physical and nancial ow of consigned inventory under a consigned purchase order (PO).
• The transaction that ows from Oracle Fusion Inventory Management into Oracle Fusion Cost Accounting andOracle Fusion Receipt Accounting.
• Accounting entries that Cost Accounting and Receipt Accounting generate for the forward ow.
• Accounting entries that Cost Accounting and Receipt Accounting generate for the return ow.
ScenarioSupplier Advanced Network Devices (AND-Fresno) ships the goods under a consigned purchase order to inventoryorganization M1-Seale.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
27
The following diagram illustrates the ow of consigned inventory:
SupplierAdvanced Network Devices
(AND-Fresno)
Inventory Organization M1-SeattleConsigned Owner = AND-FresnoContingent Owner = M1-Seattle
Inventory Organization M1-SeattleOwner = M1-Seattle
OwnershipChange
Financial Flow
Physical Flow
Transaction from Oracle Fusion Inventory ManagementCost Accounting and Receipt Accounting receive the following transaction from Inventory:
• Supplier Advanced Network Devices (AND-Fresno).
• Consignment Purchase Order #1000.
• Purchase Order price USD 100.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
28
• Ship-to organization is M1-Seale which is the contingent owner. Contingent owner assumes ownership fromthe supplier when inventory is consumed.
• Receipt and put away transactions performed in M1-Seale inventory organization in consigned status.
• When the goods are consumed ownership changes from supplier AND-Fresno to inventory organization M1-Seale.
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the forward and return shipment of goods.
Accounting Entries
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
29
The following diagram illustrates the accounting entries for the forward ow from supplier AND-Fresno to inventoryorganization M1-Seale.
AND-FresnoSupplier
Physical Flow
M1-SeattleConsigned Owner
M1- SeattleOwner
Ownership Change
M1:Transfer to Owned (Receipt)
Dr Inventory ValuationCr Trade In-Transit
M1:Transfer to Owned IssueDr Consigned Inventory Offset
Cr Consigned Inventory
M1:Trade Receipt AccrualDr Trade Clearing
Cr Accrual
M1:Trade In-Transit ReceiptDr Trade In-TransitCr Trade Clearing
M1:PO ReceiptDr Consigned ClearingCr Consigned Accrual
M1:PO DeliveryDr Consigned InventoryCr Consigned Clearing
M1:Consigned Receipt ConsumptionDr Consigned AccrualCr Consigned Clearing
Receipt Accounting and Cost Accounting generate accounting entries under inventory organization M1-Seale for thereceipt of goods.
The following table describes those accounting entries:
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
30
Subledger Event Type AccountingLine Type
TransactionType
Amount inFunctionalCurrency
FunctionalCurrency
Basis ofAmount
ReceiptAccounting
PO Receipt
ConsignedClearing
Debit
100
USD
PO Price
ReceiptAccounting
PO Receipt
ConsignedAccrual
Credit
100
USD
PO Price
CostAccounting
PO Delivery
ConsignedInventory
Debit
100
USD
PO Price
CostAccounting
PO Delivery
ConsignedClearing
Credit
100
USD
PO Price
Receipt Accounting and Cost Accounting generate accounting entries under inventory organization M1-Seale for thechange of ownership from supplier AND-Fresno to M1-Seale.
The following table describes those accounting entries:
Subledger Event Type AccountingLine Type
TransactionType
Amount inFunctionalCurrency
FunctionalCurrency
CostElement
Basis ofAmount
CostAccounting
Transfer toOwned Issue
ConsignedInventoryOset
Debit
100
USD
Material
PO Price
CostAccounting
Transfer toOwned Issue
ConsignedInventory
Credit
100
USD
Material
PO Price
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedAccrual
Debit
100
USD
Notapplicable
PO Price
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedClearing
Credit
100
USD
Notapplicable
PO Price
ReceiptAccounting
TradeReceiptAccrual
TradeClearing
Debit
100
USD
Notapplicable
PO Price
ReceiptAccounting
TradeReceiptAccrual
Accrual
Credit
100
USD
Notapplicable
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
31
Subledger Event Type AccountingLine Type
TransactionType
Amount inFunctionalCurrency
FunctionalCurrency
CostElement
Basis ofAmount
CostAccounting
Trade In-TransitReceipt
Trade In-Transit
Debit
100
USD
Material
PO Price
CostAccounting
Trade In-TransitReceipt
TradeClearing
Credit
100
USD
Material
PO Price
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
Debit
100
USD
Material
PO Price
CostAccounting
Transferto Owned(Receipt)
Trade In-Transit
Credit
100
USD
Material
PO Price
Organization M1-Seale returns goods to supplier AND-Fresno.
This gure illustrates the accounting entries for the return ow from M1-Seale to AND-Fresno.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
32
AND-FresnoSupplier
Physical Flow
M1-SeattleConsigned Owner
M1- SeattleOwner
Ownership Change
M1:Transfer to Cons (Issue)Dr Trade In-Transit
Cr Inventory Valuation
M1:Transfer to Cons (Recpt)Dr Consigned Inventory
Cr Consigned Inventory Offset
M1:Trade Return AccrualDr Accrual
Cr Trade Clearing
M1:Trade In-Transit ReturnDr Trade ClearingCr Trade In-Transit
M1:PO Return to VendorDr Consigned AccrualCr Consigned Clearing
M1:PO Return to ReceivingDr Consigned ClearingCr Consigned Inventory
LegendCons = Consigned
Recpt = Receipt
M1:Consigned Recpt Consumption
Dr Consigned ClearingCr Consigned Accrual
Receipt Accounting and Cost Accounting generate accounting entries under inventory organization M1-Seale for thechange of ownership from M1-Seale to supplier AND-Fresno.
The following table describes the accounting entries for the change in ownership.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
33
Subledger Event Type AccountingLine Type
TransactionType
Amount inFunctionalCurrency
FunctionalCurrency
CostElement
Basis ofAmount
CostAccounting
Transfer toConsigned(Receipt)
ConsignedInventory
Debit
100
USD
Material
PO Price
CostAccounting
Transfer toConsigned(Receipt)
ConsignedInventoryOset
Credit
100
USD
Material
PO Price
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedClearing
Debit
100
USD
Notapplicable
PO Price
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedAccrual
Credit
100
USD
Notapplicable
PO Price
ReceiptAccounting
TradeReturnAccrual
Accrual
Debit
100
USD
Notapplicable
PO Price
ReceiptAccounting
TradeReturnAccrual
TradeClearing
Credit
100
USD
Notapplicable
PO Price
ReceiptAccounting
Trade In-TransitReturn
TradeClearing
Debit
100
USD
Notapplicable
PO Price
ReceiptAccounting
Trade In-TransitReturn
Trade In-Transit
Credit
100
USD
Notapplicable
PO Price
CostAccounting
Transfer toConsignedIssue
Trade In-Transit
Debit
100
USD
Material
PO Price
CostAccounting
Transfer toConsignedIssue
CostVariance*
Debit
5
USD
Notapplicable
Inventory isreceived atthe currentcost, and thedierencebetweentransferprice andcost isbookedas costvariance.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
34
Subledger Event Type AccountingLine Type
TransactionType
Amount inFunctionalCurrency
FunctionalCurrency
CostElement
Basis ofAmount
CostAccounting
Transfer toConsignedIssue
InventoryValuation
Credit
105
USD
Material
Current Cost
* Inventory is received at the current cost, and the dierence between transfer price and cost is booked as cost variance.
Receipt Accounting generates accounting entries under inventory organization M1-Seale for the return of consignedgoods from M1-Seale to AND-Fresno.
The following table describes those accounting entries:
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
ReceiptAccounting
PO Return toSupplier
Consigned Accrual
100
USD
PO Price
ReceiptAccounting
PO Return toSupplier
ConsignedClearing
-100
USD
PO Price
ReceiptAccounting
PO Return toReceiving
ConsignedClearing
100
USD
PO Price
ReceiptAccounting
PO Return toReceiving
ConsignedInventory
-100
USD
PO Price
Related Topics
• Cost Proles, Default Cost Proles, and Item Cost Proles
• Consigned Inventory Lifecycle
• Consigned Inventory
Example of Consigned Inventory Accounting of anInterorganization Transfer Across Business UnitsAn interorganization transfer is a trade transaction involving the movement of goods or services between organizationsin the supply chain. The following is an example of accounting performed by Oracle Fusion Cost Accounting and OracleFusion Receipt Accounting in a simple purchase order with an interorganization transfer of goods across prot centerbusiness units. The goods remain in consigned status until ownership changes in the receiving organization.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
35
This example illustrates:
• Transactions captured in Oracle Fusion Inventory and interfaced to Cost Accounting and Receipt Accounting.
• Transactions captured in Oracle Fusion Supply Chain Financial Orchestration and interfaced to Cost Accountingand Receipt Accounting.
• Accounting entries that Cost Accounting and Receipt Accounting generate for the forward ow.
• Accounting entries that Cost Accounting and Receipt Accounting generate for the return ow.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
36
ScenarioSupplier Advanced Network Devices (AND-Fresno) ships the goods in consigned status to inventory organization M1-Seale, who in turn transfers the consigned goods to inventory organization M2-LA. Inventory organizations, M1-Sealeand M2-LA, are in dierent business units.
SupplierAdvanced Network Devices
(AND-Fresno)
Business Unit 1Inventory Organization M1-SeattleConsigned Owner = AND-FresnoContingent Owner = M1-Seattle
Business Unit 2Inventory Organization M2-LA
Owner = M2-LA
OwnershipChange
Financial Flow Physical Flow
Business Unit 2Inventory Organization M2-LA
Consigned Owner = AND-FresnoContingent Owner = M1-SeattleFinancial Flow
Physical Flow
Interfaced TransactionsOracle Fusion Inventory sends the following transactions to Receipt Accounting and Cost Accounting:
• Supplier Advanced Network Devices (AND-Fresno).
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
37
• Consignment Purchase Order #1000.
• Purchase Order price USD 100.
• Ship-to organization is M1-Seale which is the contingent owner. Contingent owner assumes ownership fromthe supplier when inventory is consumed.
• Receipt and put away transactions performed in M1-Seale inventory organization in consigned status.
• Goods transferred in consigned status from inventory organization M1-Seale to M2-LA.
• When the goods are consumed ownership changes from supplier AND-Fresno to inventory organization M2-LAthrough M1-Seale.
Oracle Fusion Supply Chain Financial Orchestration sets up the trade agreement, accounting rule sets, and associatedpurchase orders, and the information ows into Receipt Accounting and Cost Accounting. The transfer from M1-Sealeto M2-LA is based on trade agreement SFO #123 which has the following terms:
• Intercompany transfer price is USD 120.
• Intercompany invoicing is set to Yes.
• Prot tracking is set to Yes.
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the forward and return shipment of goods.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
38
Accounting EntriesThe following are accounting entries for the forward ow.
M1:Trade In-Transit IssueDr IC COGS
Cr Trade In-Transit
M2:Transfer to Owned (Receipt)
Dr Inv Valuation MATDr Inv Valuation GP
Cr Trade In-Transit MATCr Trade In-Transit GP
M2:Transfer to Owned Issue
Dr Consigned Inv OffsetCr Consigned Inventory
M2:Trade In-Transit Receipt
Dr Trade In-Transit MATDr Trade In-Transit GP
Cr Trade Clearing
M1:Trade Receipt AccrualDr Trade Clearing
Cr Accrual
M2:Trade Recpt AccrualDr Trade Clearing
Cr IC Accrual
M1:Trade In-Transit RecptDr Trade In-TransitCr Trade Clearing
M1:PO ReceiptDr Consigned ClearingCr Consigned Accrual
M1:PO DeliveryDr Consigned InventoryCr Consigned Clearing
M2:Consigned Trade Receipt Accrual
Dr Consigned ClearingCr Consigned Payable
M2:In-Transit DeliveryDr Consigned InventoryCr Consigned Inspection
M2:In-Transit ReceiptDr Consigned InspectionCr Consigned In-Transit
M2:Consigned Trade In-Transit Receipt
Dr Consigned In-TransitCr Consigned Clearing
M1:Consigned Trade In-Transit Issue
Dr Consigned ReceivableCr Consigned In-Transit
M1:In-Transit ShipmentDr Consigned In-TransitCr Consigned Inventory
AND-FresnoSupplier
M2-LAOwner
Physical Flow
Ownership Change
M1-SeattleConsigned Owner
M2-LAConsigned Owner
Physical Flow
Legend Inv = Inventory IC = Intercompany COGS = Cost of Goods Sold MAT = Material GP = Gross Profit Recpt = Receipt
Receipt Accounting generates distributions under inventory organization M1-Seale for the shipment from supplierAND-Fresno to M1-Seale.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
39
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
ReceiptAccounting
PO Receipt
ConsignedClearing
100
USD
PO Price
ReceiptAccounting
PO Receipt
Consigned Accrual
-100
USD
PO Price
ReceiptAccounting
PO Delivery
ConsignedInventory
100
USD
PO Price
ReceiptAccounting
PO Delivery
ConsignedClearing
-100
USD
PO Price
Cost Accounting generates distributions under inventory organization M1-Seale for the interorganization transfer fromM1-Seale to M2-LA.
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Cost Accounting
In-TransitShipment
Consigned In-Transit
100
USD
PO Price
Cost Accounting
In-TransitShipment
ConsignedInventory
-100
USD
PO Price
Cost Accounting
Consigned TradeIn-Transit Issue
ConsignedReceivable
100
USD
PO Price
Cost Accounting
Consigned TradeIn-Transit Issue
Consigned In-Transit
-100
USD
PO Price
Receipt Accounting and Cost Accounting generate distributions under inventory organization M2-LA for theinterorganization transfer from M1-Seale to M2-LA.
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
ReceiptAccounting
Consigned TradeReceipt Accrual
Trade Clearing
100
USD
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
40
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
ReceiptAccounting
Consigned TradeReceipt Accrual
Consigned In-Transit
-100
USD
PO Price
ReceiptAccounting
Consigned TradeIn-Transit Receipt
ConsignedClearing
100
USD
PO Price
ReceiptAccounting
Consigned ReceiptConsumption
Trade Clearing
-100
USD
PO Price
Cost Accounting
In-Transit Receipt
ConsignedInspection
100
USD
PO Price
Cost Accounting
In-Transit Receipt
Consigned In-Transit
-100
USD
PO Price
Cost Accounting
In-Transit Delivery
ConsignedInventory
100
USD
PO Price
Cost Accounting
In-Transit Delivery
ConsignedInspection
-100
USD
PO Price
Receipt Accounting and Cost Accounting generate distributions under inventory organization M1-Seale for the changeof ownership from supplier AND-Fresno to M1-Seale.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Accrual
-100
USD
Not applicable
PO Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-100
USD
Material
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
41
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Trade In-Transit Issue
IntercompanyCost of GoodsSold
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-100
USD
Material
PO Price
Receipt Accounting and Cost Accounting generate distributions under inventory organization M1-Seale for the changeof ownership from M1-Seale to M2-LA.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Accrual
-100
USD
Not applicable
PO Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-100
USD
Material
PO Price
CostAccounting
Trade In-Transit Issue
IntercompanyCost of GoodsSold
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-100
USD
Material
PO Price
Receipt Accounting and Cost Accounting generate distributions under inventory organization M2-LA for the change ofownership from M1-Seale to M2-LA.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
42
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Transfer toOwned Issue
ConsignedInventoryOset
100
USD
Material
PO Price
CostAccounting
Transfer toOwned Issue
ConsignedInventory
-100
USD
Material
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
120
USD
Not applicable
Transfer Price
ReceiptAccounting
Trade ReceiptAccrual
IntercompanyAccrual
-120
USD
Not applicable
Transfer Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
20
USD
Prot inInventory
InternalMarkup
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-120
USD
Material
Transfer Price
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
100
USD
Material
PO Price
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
20
USD
Prot inInventory
InternalMarkup
CostAccounting
Transferto Owned(Receipt)
Trade In-Transit
-100
USD
Material
PO Price
CostAccounting
Transferto Owned(Receipt)
Trade In-Transit
-20
USD
Prot inInventory
InternalMarkup
Inventory organization M2-LA returns the goods to supplier AND-Fresno. The return of the consignment is executed intwo parts:
• An interorganization transfer from M2-LA to M1-Seale. The accounting is the same as simple purchase orderreturn transactions.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
43
• A consignment return from M1-Seale to the supplier. The accounting is the same as regular return to suppliertransactions.
Related Topics
• Consigned Inventory Lifecycle
• Consigned Inventory
Example of Consigned Inventory Accounting of anInterorganization Transfer Within the Same Business UnitAn intraorganization transfer is a trade transaction involving the movement of goods or services between organizationsin the supply chain. The following is an example of accounting performed by Oracle Fusion Cost Accounting and OracleFusion Receipt Accounting for an interorganization transfer of goods within the same prot center business unit.
This example illustrates:
• Transactions captured in Oracle Fusion Inventory and interfaced to Cost Accounting and Receipt Accounting.
• Accounting entries that Cost Accounting and Receipt Accounting generate for the forward ow.
• Accounting entries that Cost Accounting and Receipt Accounting generate for the return ow.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
44
ScenarioSupplier Advanced Network Devices (AND-Fresno) ships the goods in consigned status to inventory organization M3-NY, who in turn transfers the goods to inventory organization M4-NJ. Inventory organizations, M3-NY and M4-NJ, arewithin the same business unit.
SupplierAdvanced Network Devices
(AND-Fresno)
Inventory Organization M3-NYConsigned Owner = AND-Fresno
Contingent Owner = M3-NY
Inventory Organization M4-NJOwner = M4-NJ
OwnershipChange
Financial Flow Physical Flow
Inventory Organization M4-NJConsigned Owner = AND-Fresno
Contingent Owner = M4-NJFinancial Flow
Physical Flow
Interfaced TransactionsCost Accounting and Receipt Accounting receive the following transaction from Oracle Fusion Inventory:
• Consignment Purchase Order (PO) #1000.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
45
• Purchase Order price USD 100.
• Ship-to organization is M3-NY which is also the contingent owner. Contingent owner assumes ownership fromthe supplier when inventory is consumed.
• Receipt and put away transactions are performed in M3-NY in consigned status.
• Goods are transferred in consigned status from M3-NY to M4-NJ.
• Ownership changes from supplier to M4-NJ through M3-NY when the goods are consumed.
Cost Accounting generates transactions for:
• Ownership changes from supplier AND-Fresno to inventory organization M3-NY and from M3-NY to M4-NJ.
• Transfer of goods from M3-NY to M4-NJ. The transfer is at cost because the organizations are within the sameprot center business unit.
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the forward and return shipment of goods.
Accounting EntriesThe following are accounting entries for the forward ow.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
46
The following diagram lists the accounting entries for the forward ow.
AND-FresnoSupplier
M4-NJOwner
Physical Flow
Ownership Change
M3-NYConsigned Owner
M4-NJConsigned Owner
Physical Flow
M3:Trade In-Transit IssueDr Interorg Receivable
Cr Trade In-Transit
M4:Transfer to Owned (Receipt)
Dr Inv Valuation MATCr Trade In-Transit
M4:Transfer to Owned Issue
Dr Consigned Inv OffsetCr Consigned Inventory
M4:Trade In-Transit Receipt
Dr Trade In-TransitCr Trade Clearing
M3:Trade Receipt AccrualDr Trade Clearing
Cr Accrual
M4:Trade Recpt AccrualDr Trade Clearing
Cr Interorg Payable
M3:Trade In-Transit RecptDr Trade In-TransitCr Trade Clearing
M3:PO ReceiptDr Consigned ClearingCr Consigned Accrual
M3:PO DeliveryDr Consigned InventoryCr Consigned Clearing
M4:Consigned Trade Receipt Accrual
Dr Consigned ClearingCr Consigned Payable
M4:In-Transit DeliveryDr Consigned InventoryCr Consigned Inspection
M4:In-Transit ReceiptDr Consigned InspectionCr Consigned In-Transit
M4:Consigned Trade In-Transit Receipt
Dr Consigned In-TransitCr Consigned Clearing
M3:Consigned Trade In-Transit Issue
Dr Consigned ReceivableCr Consigned In-Transit
M3:In-Transit ShipmentDr Consigned In-TransitCr Consigned Inventory
Legend Inv = Inventory Interorg = Interorganization MAT = Material Recpt = Receipt
The following table lists the distributions that Receipt Accounting generates under inventory organization M3-NY forthe shipment from supplier AND-Fresno to M3-NY.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
47
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
ReceiptAccounting
PO Receipt
ConsignedClearing
100
USD
PO Price
ReceiptAccounting
PO Receipt
Consigned Accrual
-100
USD
PO Price
ReceiptAccounting
PO Delivery
ConsignedInventory
100
USD
PO Price
ReceiptAccounting
PO Delivery
ConsignedClearing
-100
USD
PO Price
The following table lists the distributions generated by Cost Accounting under inventory organization M3-NY for theinterorganization transfer from M3-NY to organization M4-NJ.
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Cost Accounting
In-TransitShipment
Consigned In-Transit
100
USD
PO Price
Cost Accounting
In-TransitShipment
ConsignedInventory
-100
USD
PO Price
Cost Accounting
Consigned TradeIn-Transit Issue
ConsignedReceivable
100
USD
PO Price
Cost Accounting
Consigned TradeIn-Transit Issue
Consigned In-Transit
-100
USD
PO Price
Cost Accounting generates distributions under inventory organization M4-NJ for the interorganization transfer fromM3-NY to M4-NJ.
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Cost Accounting
Consigned TradeReceipt Accrual
ConsignedClearing
100
USD
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
48
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Cost Accounting
Consigned TradeReceipt Accrual
ConsignedPayable
-100
USD
PO Price
Cost Accounting
Consigned TradeIn-Transit Receipt
Consigned In-Transit
100
USD
PO Price
Cost Accounting
Consigned TradeIn-Transit Receipt
ConsignedClearing
-100
USD
PO Price
Cost Accounting
In-Transit Receipt
ConsignedInspection
100
USD
PO Price
Cost Accounting
In-Transit Receipt
Consigned In-Transit
-100
USD
PO Price
Cost Accounting
In-Transit Delivery
ConsignedInventory
100
USD
PO Price
Cost Accounting
In-Transit Delivery
ConsignedInspection
-100
USD
PO Price
Receipt Accounting and Cost Accounting generate distributions under inventory organization M3-NY for the change ofownership from supplier AND-Fresno to M3-NY.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Accrual
-100
USD
Not applicable
PO Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-100
USD
Material
PO Price
CostAccounting
Trade In-Transit Issue
InterorganizationReceivable
100
USD
Material
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
49
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-100
USD
Material
PO Price
Receipt Accounting and Cost Accounting generate distributions under inventory organization M4-NJ for the change ofownership from M3-NY to M4-NJ.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Transfer toOwned Issue
ConsignedInventoryOset
100
USD
Material
PO Price
CostAccounting
Transfer toOwned Issue
ConsignedInventory
-100
USD
Material
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not applicable
Transfer Price
ReceiptAccounting
Trade ReceiptAccrual
InterorganizationPayable
-100
USD
Not applicable
Transfer Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-100
USD
Material
PO Price
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
100
USD
Material
PO Price
CostAccounting
Transferto Owned(Receipt)
Trade In-Transit
-100
USD
Material
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
50
Inventory organization M4-NJ returns goods to supplier AND-Fresno. The return of the consignment is executed in twoparts:
• An interorganization transfer from M4-NJ to M3-NY. The accounting is the same as simple purchase orderreturn transactions.
• A consignment return from M3-NY to the supplier. The accounting is the same as regular return to suppliertransactions.
Related Topics
• Consigned Inventory Lifecycle
• Consigned Inventory
Example of Consigned Inventory Accounting in a Global PurchaseOrderMost large enterprises use a global procurement approach to their purchasing needs, where a central buyingorganization buys goods from suppliers on behalf of the internal organizations. This includes trade transactionsinvolving consigned inventory executed under a global purchase order. Oracle Fusion Receipt Accounting and OracleFusion Cost Accounting process these consigned inventory transactions and generate subledger journal entries.
The following example illustrates:
• The physical and nancial ow of consigned inventory in a global purchase order.
• Transactions that ow from Oracle Fusion Inventory into Cost Accounting and Receipt Accounting.
• Transactions that ow from Oracle Fusion Supply Chain Financial Orchestration into Cost Accounting andReceipt Accounting.
• Accounting entries that Cost Accounting and Receipt Accounting generate for the forward ow.
• Accounting entries that Cost Accounting and Receipt Accounting generate for the return ow.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
51
ScenarioThe supplier AND-Fresno ships the goods in consigned status to inventory organization M2-LA, through the purchasingtrade organization M1-Seale.
SupplierAdvanced Network Devices
(AND-Fresno)
Sold-to Legal EntitySold-to Profit Center BU 1
Purchasing Trade Org = M1-Seattle
Profit Center BU 2Inventory Organization M2-LA
Owner = M2-LA
OwnershipChange
FinancialFlow
Profit Center BU 2Ship-To Inventory Org M2-LA
Consigned Owner = AND-FresnoContingent Owner = M2-LAFinancial
Flow
PhysicalFlow
LegendBU = Business UnitOrg = Organization
Interfaced TransactionsCost Accounting and Receipt Accounting receive the following transaction from Oracle Fusion Inventory:
• Consignment Purchase Order (PO) #1000.
• Purchase Order price USD 100.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
52
• Sold-to Legal Entity is LE1.
• Ship-to organization is M2-LA which is also the contingent owner. Contingent owner assumes ownership fromthe supplier when inventory is consumed.
• Receipt and put away transactions performed in M2-LA in consigned status.
• Ownership changes from supplier AND-Fresno to M2-LA through M1-Seale when the goods are consumed.
The trade agreement, accounting rule sets, and associated purchase orders are set up in Supply Chain FinancialOrchestration, and the transactions ow into Receipt Accounting and Cost Accounting. The shipment from supplier toinventory organization M2-LA is based on trade agreement GP #123 which has the following terms:
• Intercompany transfer price is USD 120.
• Intercompany invoicing is set to Yes.
• Prot tracking is set to Yes.
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the forward and return shipment of goods.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
53
Accounting EntriesThe following are accounting entries for the forward ow.
Legend Inv = Inventory IC = Intercompany COGS = Cost of Goods Sold Recpt = Receipt MAT = Material GP = Gross Profit
AND-FresnoSupplier
M2-LAConsigned Owner =
AND-FresnoContingent Owner =
M2-LA
M1-SeattleOwner
Physical Flow
M2:PO ReceiptDr Consigned ClearingCr Consigned Accrual
M2:PO DeliveryDr Consigned InventoryCr Consigned Clearing
M1:Trade In-Transit Issue
Dr IC COGSCr Trade In-Transit
M2:Transfer to Owned (Receipt)
Dr Inv Valuation MATDr Inv Valuation GP
Cr Trade In-Transit MATCr Trade In-Transit GP
M2:Transfer to Owned Issue
Dr Consigned Inv OffsetCr Consigned Inventory
M2:Trade In-Transit RecptDr Trade In-Transit MATDr Trade In-Transit GP
Cr Trade Clearing
M1:Trade Receipt Accrual
Dr Trade ClearingCr Accrual
M2:Trade Recpt AccrualDr Trade Clearing
Cr IC Accrual
M1:Trade In-Transit Recpt
Dr Trade In-TransitCr Trade Clearing
M2:Consigned Receipt Consignment
Dr Consigned AccrualCr Consigned Clearing
OwnershipChange
OwnershipChange
Receipt Accounting generates distributions under inventory organization M2-LA for the consigned shipment fromsupplier AND-Fresno to M2-LA.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
54
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
ReceiptAccounting
PO Receipt
ConsignedClearing
100
USD
PO Price
ReceiptAccounting
PO Receipt
Consigned Accrual
-100
USD
PO Price
ReceiptAccounting
PO Delivery
ConsignedInventory
100
USD
PO Price
ReceiptAccounting
PO Delivery
ConsignedClearing
-100
USD
PO Price
Receipt Accounting and Cost Accounting generate distributions under inventory organization M1-Seale for the changeof ownership from supplier AND-Fresno to M1-Seale.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Accrual
-100
USD
Not applicable
PO Price
ReceiptAccounting
Trade In-Transit Receipt
Trade In-Transit
100
USD
Not applicable
PO Price
ReceiptAccounting
Trade In-Transit Receipt
Trade clearing
-100
USD
Not applicable
PO Price
CostAccounting
Trade In-Transit Issue
IntercompanyCost of GoodsSold
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-100
USD
Material
PO Price
Receipt Accounting and Cost Accounting generate distributions under inventory organization M2-LA for the change ofownership from M1-Seale to M2-LA.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
55
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Transfer toOwned Issue
ConsignedInventoryOset
100
USD
Material
PO Price
CostAccounting
Transfer toOwned Issue
ConsignedInventory
-100
USD
Material
PO Price
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedAccrual
100
USD
Not applicable
PO Price
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedClearing
-100
USD
Not applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
120
USD
Not applicable
Transfer Price
ReceiptAccounting
Trade ReceiptAccrual
IntercompanyAccrual
-120
USD
Not applicable
Transfer Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
20
USD
Prot inInventory
InternalMarkup
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-120
USD
Material
Transfer Price
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
100
USD
Material
PO Price
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
20
USD
Prot inInventory
InternalMarkup
CostAccounting
Transferto Owned(Receipt)
Trade In-Transit
-100
USD
Material
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
56
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Transferto Owned(Receipt)
Trade In-Transit
-20
USD
Prot inInventory
InternalMarkup
Organization M2-LA returns goods to supplier AND-Fresno. The following are accounting entries for the return ow.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
57
Legend Inv = Inventory IC = Intercompany COGS = Cost of Goods Sold Recpt = Receipt Ret = Return MAT = Material GP = Gross Profit OH = Overhead
OwnershipChange
M2:PO Return to VendorDr Consigned AccrualCr Consigned Clearing
M2:PO Ret to ReceivingDr Consigned ClearingCr Consigned Inventory
M1:Trade In-Transit Return Receipt
Dr Trade In-TransitCr IC COGS
M2:Transfer to Consigned Issue
Dr Inv Valuation MATDr Inv Valuation GPDr Inv Valuation OH
Cr trade In-Transit MATCr Trade In-TransitCr Cost Variance
M2:Transfer to Consigned (Receipt)
Dr Consigned InventoryCr Consigned Inv Offset
M2:Trade In-Transit Ret Dr Trade ClearingCr Trade In-TransitM1:Trade Ret Accrual
Dr AccrualCr Trade Clearing
M2:Trade Ret AccrualDr IC Accrual
Cr Trade Clearing
M1:Trade In-Transit RetDr Trade ClearingCr Trade In-Transit
AND-FresnoSupplier
M2-LAConsigned Owner =
AND-FresnoContingent Owner =
M2-LA
M1-SeattleOwner
OwnershipChange
PhysicalFlow
M2:Consigned Receipt Consumption
Dr Consigned ClearingCr Consigned Accrual
Receipt Accounting and Cost Accounting generate distributions under inventory organization M2-LA for the change ofownership from M2-LA to M1-Seale:
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
58
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Transfer toConsignedReceipt
ConsignedInventory
100
USD
Material
PO Price
CostAccounting
Transfer toConsignedReceipt
ConsignedInventoryOset
-100
USD
Material
PO Price
ReceiptAccounting
Trade ReturnAccrual
IntercompanyAccrual
120
USD
Not applicable
Transfer Price
ReceiptAccounting
Trade ReturnAccrual
Trade Clearing
-120
USD
Not applicable
Transfer Price
CostAccounting
Trade In-Transit Return
Trade Clearing
120
USD
Material
Transfer Price
CostAccounting
Trade In-Transit Return
Trade In-Transit
-100
USD
Material
PO Price
CostAccounting
Trade In-Transit Return
Trade In-Transit
-20
USD
Prot inInventory
InternalMarkup
CostAccounting
ConsignedReceiptConsumption
ConsignedClearing
100
USD
Material
PO Price
CostAccounting
ConsignedReceiptConsumption
ConsignedAccrual
-100
USD
Material
PO Price
CostAccounting
Transfer toConsignedIssue
InventoryValuation
100
USD
Material
PO Price
CostAccounting
Transfer toConsignedIssue
InventoryValuation
20
USD
Prot inInventory
InternalMarkup
CostAccounting
Transfer toConsignedIssue
InventoryValuation
10
USD
Overhead
Not applicable
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
59
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Transfer toConsignedIssue
Trade In-Transit
-100
USD
Material
PO Price
CostAccounting
Transfer toConsignedIssue
Trade In-Transit
-20
USD
Prot inInventory
InternalMarkup
CostAccounting
Transfer toConsignedIssue
Cost Variance*
-10
USD
Material
Not applicable
*Inventory is depleted at the current cost, and the dierence between transfer price and cost is booked as cost variance.
Receipt Accounting and Cost Accounting generate distributions under inventory organization M1-LA for the change ofownership from M1-LA to supplier AND-Fresno:
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReturnAccrual
Accrual
100
USD
Not applicable
PO Price
ReceiptAccounting
Trade ReturnAccrual
Trade Clearing
-100
USD
Not applicable
PO Price
CostAccounting
Trade In-Transit Return
Trade Clearing
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Return
Trade In-Transit
-100
USD
Material
PO Price
CostAccounting
Trade In-Transit ReturnReceipt
Trade In-Transit
100
USD
Material
PO Price
CostAccounting
Trade In-Transit ReturnReceipt
IntercompanyCost of GoodsSold
-100
USD
Material
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
60
Receipt Accounting generates distributions under inventory organization M2-LA for the return shipment from M2-LA tosupplier AND-Fresno:
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
ReceiptAccounting
PO Return toSupplier
Consigned Accrual
100
USD
PO Price
ReceiptAccounting
PO Return toSupplier
ConsignedClearing
-100
USD
PO Price
ReceiptAccounting
PO Return toReceiving
ConsignedClearing
100
USD
PO Price
ReceiptAccounting
PO Return toReceiving
ConsignedInventory
-100
USD
PO Price
Related Topics
• Consigned Inventory Lifecycle
• Consigned Inventory
Example of Accounting of Global Procurement Trade Transactionsinto InventoryMost large enterprises use a global procurement approach to their purchasing needs, wherein a central buyingorganization buys goods from suppliers on behalf of the internal organizations. Oracle Fusion Receipt Accounting andOracle Fusion Cost Accounting process transactions for these global procurement trade events and generate subledgerjournal entries.
The following is an example of accounting performed by Cost Accounting and Receipt Accounting for a globalprocurement ow into inventory. It illustrates:
• Transactions that are captured in Oracle Fusion Supply Chain Financial Orchestration and interfaced to ReceiptAccounting and Cost Accounting.
• Accounting entries that Receipt Accounting and Cost Accounting generate for the forward ow of a shipmentfrom the supplier, through the intermediary distributor, to the nal receiving organization.
• Accounting entries that Receipt Accounting and Cost Accounting generate for the return ow from thereceiving organization to the supplier.
ScenarioChina Supplier ships the goods to US Inc. through the intermediary distributor, China Ltd.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
61
Transactions from Oracle Fusion Supply Chain Financial OrchestrationThe global procurement trade agreement, accounting rule sets, and associated purchase orders are set up in SupplyChain Financial Orchestration, and the transactions ow into Receipt Accounting and Cost Accounting based on thissetup:
• Purchase Order (PO) price from China Supplier to China Ltd. is USD 50.
• Intercompany transfer price from China Ltd. to US Inc. is USD 100.
• Intercompany invoicing is set to Yes.
• Prot tracking is set to Yes.
• Overhead rule is congured in Cost Accounting for transaction type Trade in-Transit Receipt in CostOrganization CO1.
• China Ltd books a prot of USD 40 (USD 100 transfer price - USD 50 PO price - USD 10 overhead).
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the forward and return shipment of goods.
Accounting Entries
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
62
The following gure illustrates accounting entries for the forward ow from legal entity China Ltd. to legal entity US Inc.
China Supplier
Trade Receipt Accrual Dr Trade Clearing $50 Cr Accrual $50
Trade In-Transit Receipt Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Cr Trade Clearing $50 Cr OVH Absorption $10
Trade In-Transit Issue Dr IC COGS MAT $50 Dr IC COGS OVH $10 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10
IC AR Invoice Dr IC Receivable $100 Cr IC Revenue $100
Supplier Invoice Dr Accrual $50 Cr Liability $50
Trade Receipt Accrual Dr Trade Clearing $100 Cr IC Accrual $100
Trade In-Transit ReceiptDr Trade In-Transit MAT $50Dr Trade In-Transit OVH $10Dr Trade In-Transit GP $40Cr Trade Clearing $100
IC AP Invoice Dr IC Accrual $100 Cr IC Liability $100
PO Receipt Dr Receiving Inspection $100 Cr Trade In-Transit $100
Legend LE = Legal Entity BU = Business Unit MAT = Material OVH = Overhead IC = Intercompany COGS = Cost of Goods Sold AR = Accounts Receivable AP = Accounts payable GP = Gross Profit Cst Org = Cost Organization Inv Org = Inventory Organization
China Ltd (Sold-to LE)CN (Sold-to Profit Ctr BU)
CO1 (Sold-to Cst Org)M1 (Sold-to Inv Org)
US Inc (Receiving LE)US West (Receiving Profit
Ctr BU)CO2 (Receiving Cst Org)M2 (Receiving Inv Org)
PO DeliveryDr Inventory Valuation MAT$50Dr Inventory Valuation OVH$10Dr Inventory Valuation GP $40Cr Receiving Inspection $100
Receipt Accounting generates distributions under business unit CN and inventory organization M1. Cost Accountinggenerates distributions under cost organization CO1 and inventory organization M1.
The following table describes those distributions.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
63
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
50
USD
Not Applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Accrual
-50
USD
Not Applicable
PO Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
50
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-50
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Expense
10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit Receipt
OverheadAbsorption
-10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit Issue
IntercompanyCOGS
50
USD
Material
PO Price
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-50
USD
Material
PO Price
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyReceivable
100
USD
Not Applicable
Transfer Price
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyRevenue
-100
USD
Not Applicable
Transfer Price
ReceiptAccounting
SupplierInvoice
Accrual
50
USD
Not Applicable
PO Price
ReceiptAccounting
SupplierInvoice
Liability
-50
USD
Not Applicable
PO Price
Receipt Accounting generates distributions under business unit US West and inventory organization M2. CostAccounting generates distributions under cost organization CO2 and inventory organization M2.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
64
The following table describes those distributions.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Trade ReceiptAccrual
IntercompanyAccrual
-100
USD
Not Applicable
Transfer Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
50
USD
Material
SendingOrganizationCost
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
40
USD
Prot inInventory
InternalMarkup
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-100
USD
Material
Transfer Price
AccountsPayable
IntercompanyAccountsPayable Invoice
IntercompanyAccrual
100
USD
Not Applicable
Transfer Price
AccountsPayable
IntercompanyAccountsPayable Invoice
IntercompanyLiability
-100
USD
Not Applicable
Transfer Price
ReceiptAccounting
PO Receipt
ReceivingInspection
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
PO Receipt
Trade In-Transit
-100
USD
Not Applicable
Transfer Price
CostAccounting
PO Delivery
InventoryValuation
50
USD
Material
SendingOrganizationCost
CostAccounting
PO Delivery
InventoryValuation
10
USD
Overhead
SendingOrganizationCost
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
65
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
PO Delivery
InventoryValuation
40
USD
Prot inInventory
InternalMarkup
CostAccounting
PO Delivery
ReceivingInspection
-100
USD
Not Applicable
Transfer Price
US Inc returns goods directly to China Supplier.
The following gure illustrates accounting entries for the return ow from legal entity US Inc to legal entity China Ltd.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
66
China Supplier
Trade Return Accrual Dr Accrual $50 Cr Trade Clearing $50
Trade In-Transit Return Dr Trade Clearing $50 Dr Cost Variance $10 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10
Trade In-Transit Ret Rec Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Cr IC COGS MAT $50 Cr IC COGS OVH $10
IC AR Invoice Dr IC Revenue $100 Cr IC Receivable $100
Supplier Invoice Dr Liability $50 Cr Accrual $50
Trade Return Accrual Dr IC Accrual $100 Cr Trade Clearing $100
Trade In-Transit ReturnDr Trade Clearing $100Cr Trade In-Transit MAT $50Cr Trade In-Transit OVH $10Cr Trade In-Transit GP $40
IC AP Invoice Dr IC Liability $100 Cr IC Accrual $100
Return to Vendor Dr Trade In-Transit $100 Cr Receiving Inspection $100
Legend LE = Legal Entity BU = Business Unit MAT = Material OVH = Overhead IC = Intercompany COGS = Cost of Goods Sold AR = Accounts Receivable AP = Accounts payable GP = Gross Profit Cst Org = Cost Organization Inv Org = Inventory Organization Ret Rec = Return Receipt
China Ltd (Sold-to LE)CN (Sold-to Profit Ctr BU)
CO1 (Sold-to Cst Org)M1 (Sold-to Inv Org)
US Inc (Receiving LE)US West (Receiving Profit
Ctr BU)CO2 (Receiving Cst Org)M2 (Receiving Inv Org)
Return to ReceivingDr Receiving Inspection $100Cr Inventory Valuation MAT$50Cr Inventory Valuation OVH$10Cr Inventory Valuation GP $40
Receipt Accounting generates distributions under business unit US West and inventory organization M2. CostAccounting generates distributions under cost organization CO2 and inventory organization M2.
The following table describes those distributions.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
67
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReturnAccrual
IntercompanyAccrual
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Trade ReturnAccrual
Trade Clearing
-100
USD
Not Applicable
Transfer Price
CostAccounting
Trade In-Transit Return
Trade Clearing
100
USD
Material
Transfer Price
CostAccounting
Trade In-Transit Return
Trade In-Transit
-50
USD
Material
SendingOrganizationCost
CostAccounting
Trade In-Transit Return
Trade In-Transit
-10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade In-Transit Return
Trade In-Transit
-40
USD
Prot inInventory
InternalMarkup
CostAccounting
Return toReceiving
ReceivingInspection
100
USD
Material,Overhead,and Prot inInventory
Transfer Price
CostAccounting
Return toReceiving
InventoryValuation
-50
USD
Material
SendingOrganizationCost
CostAccounting
Return toReceiving
InventoryValuation
-10
USD
Overhead
SendingOrganizationCost
CostAccounting
Return toReceiving
InventoryValuation
-40
USD
Prot inInventory
InternalMarkup
ReceiptAccounting
Return toSupplier
Trade In-Transit
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Return toSupplier
ReceivingInspection
-100
USD
Not Applicable
Transfer Price
ReceiptAccounting
IntercompanyAP Invoice
IntercompanyLiability
100
USD
Not Applicable
Transfer Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
68
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
IntercompanyAP Invoice
IntercompanyAccrual
-100
USD
Not Applicable
Transfer Price
Receipt Accounting generates distributions under business unit CN and inventory organization M1. Cost Accountinggenerates distributions under cost organization CO1 and inventory organization M1.
The following table describes those distributions.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReturnAccrual
Accrual
50
USD
Not Applicable
PO Price
ReceiptAccounting
Trade ReturnAccrual
Trade Clearing
-50
USD
Not Applicable
PO Price
CostAccounting
Trade In-Transit Return
Trade Clearing
50
USD
Material
PO Price
CostAccounting
Trade In-Transit Return
Cost Variance*
10
USD
Not Applicable
Inventory isdepleted atthe currentcost, and thedierencebetweentransfer priceand cost isbooked as costvariance
CostAccounting
Trade In-Transit Return
Trade In-Transit
-50
USD
Material
PO Price
CostAccounting
Trade In-Transit Return
Trade In-Transit
-10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit ReturnReceipt
Trade In-Transit
50
USD
Material
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
69
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Trade In-Transit ReturnReceipt
Trade In-Transit
10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit ReturnReceipt
IntercompanyCOGS
-50
USD
Material
PO Price
CostAccounting
Trade In-Transit ReturnReceipt
IntercompanyCOGS
-10
USD
Overhead
Overhead Rate
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyRevenue
100
USD
Not Applicable
Transfer Price
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyReceivable
-100
USD
Not Applicable
Transfer Price
ReceiptAccounting
SupplierInvoice
Liability
50
USD
Not Applicable
PO Price
ReceiptAccounting
SupplierInvoice
Accrual
-50
USD
Not Applicable
PO Price
*Inventory is depleted at the current cost, and the dierence between transfer price and cost is booked as cost variance.
Example of Accounting of Interorganization Transfers AcrossBusiness UnitsThis example illustrates:
• Transactions that are captured in Oracle Fusion Supply Chain Financial Orchestration and interfaced to ReceiptAccounting and Cost Accounting.
• Accounting entries that Receipt Accounting and Cost Accounting generate for the transfer of goods acrossprot center business units.
ScenarioChina Ltd. ships the goods to US Inc. The organizations are in two dierent prot center business units.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
70
Transactions from Oracle Fusion Supply Chain Financial OrchestrationThe trade agreement, accounting rule sets, and associated purchase orders are set up in Supply Chain FinancialOrchestration, and the transactions ow into Receipt Accounting and Cost Accounting based on this setup:
• China Ltd. acquires goods locally at the cost of USD 50, plus USD 10 overhead on the receipt of goods.
• Intercompany transfer price from China Ltd. to US Inc. is USD 100.
• Intercompany invoicing is set to No.
• Prot tracking is set to Yes.
• Overhead rule is congured in Cost Accounting for transaction type Trade in-Transit Receipt in CostOrganization CO1.
• China Ltd. books a prot of USD 40 (USD 100 transfer price - USD 50 acquisition cost - USD 10 overhead).
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the transfer of goods.
Accounting Entries
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
71
The following gure illustrates accounting entries for the shipment from legal entity China Ltd. to legal entity US Inc.
Trade Receipt Accrual Dr Trade Clearing $100 Cr IO Payable $100
Trade In-Transit ReceiptDr Trade In-Transit MAT $50Dr Trade In-Transit OVH $10Dr Trade In-Transit GP $40Cr Trade Clearing $100
Interorganization Delivery Dr Inventory MAT $50 Dr Inventory OVH $10 Dr Inventory GP $40 Cr Receiving Inspection $100
Legend LE = Legal Entity BU = Business Unit MAT = Material OVH = Overhead IC = Intercompany COGS = Cost of Goods Sold AR = Accounts Receivable AP = Accounts payable GP = Gross Profit Cst Org = Cost Organization Inv Org = Inventory Organization IO = Interorganization
US Inc (Receiving LE)US West (Receiving Profit
Ctr BU)CO2 (Receiving Cst Org)M2 (Receiving Inv Org)
Interorganization ReceiptDr Receiving Inspection $100Cr Trade In-Transit $100
In-Transit Shipment Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Cr Inventory MAT $50 Cr Inventory OVH $10
Trade In-Transit Issue Dr IO Receivable $100 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10 Cr IO Gain/Loss $40
China Ltd (LE)CN (Profit Ctr BU)
CO1 (Cst Org)M1 (Inv Org)
Cost Accounting generates distributions under cost organization CO1 and inventory organization M1.
The following table describes the distributions:
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
72
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
In-TransitShipment
Trade In-Transit
50
USD
Material
Current Cost
CostAccounting
In-TransitShipment
Trade In-Transit
10
USD
Overhead
Current Cost
CostAccounting
In-TransitShipment
Inventory
-50
USD
Material
Current Cost
CostAccounting
In-TransitShipment
Inventory
-10
USD
Overhead
Current Cost
CostAccounting
Trade In-Transit Issue
InterorganizationReceivable
100
USD
Material,Overhead
Transfer Price
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-50
USD
Material
Current Cost
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-10
USD
Not applicable
InternalMarkup(Transfer Priceminus CurrentCost)
CostAccounting
Trade In-Transit Issue
InterorganizationGain/Loss
-40
USD
Not applicable
InternalMarkup
Receipt Accounting generates distributions under business unit US West and inventory organization M2. CostAccounting generates distributions under cost organization CO2 and inventory organization M2.
The following table describes those distributions.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not applicable
Transfer Price
ReceiptAccounting
Trade ReceiptAccrual
InterorganizationPayable
-100
USD
Not applicable
Transfer Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
73
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
50
USD
Material
SendingOrganizationCost
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
40
USD
Prot inInventory
InternalMarkup
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-100
USD
Material,Overhead,and Prot inInventory
Transfer Price
ReceiptAccounting
InterorganizationReceipt
ReceivingInspection
100
USD
Not applicable
Transfer Price
ReceiptAccounting
InterorganizationReceipt
Trade In-Transit
-100
USD
Not applicable
Transfer Price
CostAccounting
InterorganizationDelivery
Inventory
50
USD
Material
SendingOrganizationCost
CostAccounting
InterorganizationDelivery
Inventory
10
USD
Overhead
SendingOrganizationCost
CostAccounting
InterorganizationDelivery
Inventory
40
USD
Prot inInventory
InternalMarkup
CostAccounting
InterorganizationDelivery
ReceivingInspection
-100
USD
Material,Overhead,and Prot inInventory
Transfer Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
74
Example of Accounting of Trade Transactions in Internal DropShipmentsAn internal drop shipment is a trade transaction involving the movement of goods from an inventory organizationdirectly to a customer, yet the business unit that sells the goods to the customer is dierent from the business unitto which the inventory organization belongs. From the nancial standpoint, the business unit to which the inventoryorganization belongs sells the goods to the other business unit who, in turn, sells the goods to the customer.
The following is an example of accounting performed by Oracle Fusion Cost Accounting and Oracle Fusion ReceiptAccounting for an internal drop shipment. It illustrates:
• Transactions that are captured in Oracle Fusion Supply Chain Financial Orchestration and interfaced to ReceiptAccounting and Cost Accounting.
• Accounting entries that Receipt Accounting and Cost Accounting generate for the drop shipment ow from theselling organization to the customer of the buying organization.
• Accounting entries that Receipt Accounting and Cost Accounting generate for the return ow from thecustomer to the seller.
ScenarioChina Ltd. drop ships the goods to the customer of US Inc.
Transactions from Oracle Fusion Supply Chain Financial OrchestrationThe trade agreement, accounting rule sets, and associated purchase orders are set up in Oracle Fusion Supply ChainFinancial Orchestration, and the transactions ow into Receipt Accounting and Cost Accounting based on this setup:
• China Ltd. acquires goods locally at the cost of USD 50, plus USD 10 overhead on the receipt of goods.
• Intercompany transfer price from China Ltd. to US Inc. is USD 100.
• Intercompany invoicing is set to Yes.
• Overhead rule is congured in Cost Accounting for transaction type Trade in-Transit Receipt in CostOrganization CO1.
• US Inc. books a prot of USD 40 (USD 100 transfer price - USD 50 PO price - USD 10 overhead).
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the transfer of goods.
Accounting Entries
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
75
The following gure illustrates accounting entries for the shipment from legal entity China Ltd. to legal entity US Inc.
Legend LE = Legal Entity BU = Business Unit MAT = Material OVH = Overhead IC = Intercompany COGS = Cost of Goods Sold DCOGS = Deferred COGS AR = Accounts Receivable AP = Accounts payable GP = Gross Profit Cst Org = Cost Organization Inv Org = Inventory Organization IO = Interorganization
Sales Order Issue Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Cr Inventory MAT $50 Cr Inventory OVH $10
Trade In-Transit Issue Dr IC COGS MAT $50 Dr IC COGS OVH $10 Cr Trade In-Transit MAT $50 Cr Trade in-Transit OVH $10
China Ltd (LE)CN (Profit Ctr BU)
CO1 (Cst Org)M1 (Inv Org)
Trade Receipt Accrual Dr Trade Clearing $100 Cr IC Accrual $100
Trade In-Transit Receipt Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Dr Trade In-Transit GP $40 Cr Trade Clearing $100
Trade Sales Issue Dr DCOGS MAT $50 Dr DCOGS OVH $10 Dr DCOGS GP $40 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10 Cr Trade In-Transit GP $40
US Inc (Sold-to LE)US West (Sold-to Profit Ctr
BU)CO2 (Sold-to Cst Org)M2 (Sold-to Inv Org)
IC AP Invoice Dr IC Accrual $100 Cr IC Liatility $100
Customer AR Invoice Dr Receivable $120 Cr Revenue $120
COGS Recognition Dr COGS MAT $50 Dr COGS OVH $10 Dr COGS GP $40 Cr DCOGS MAT $50 Cr DCOGS OVH $10 Cr DCOGS GP $40
Customer
IC AR Invoice Dr IC Receivable $100 Cr IC Revenue $100
Cost Accounting generates distributions under cost organization CO1 and inventory organization M1.
The following table describes the cost accounting entries.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
76
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Sales OrderIssue
Trade In-Transit
50
USD
Material
Current Cost
CostAccounting
Sales OrderIssue
Trade In-Transit
10
USD
Overhead
Current Cost
CostAccounting
Sales OrderIssue
Inventory
-50
USD
Material
Current Cost
CostAccounting
Sales OrderIssue
Inventory
-10
USD
Overhead
Current Cost
CostAccounting
Trade In-Transit Issue
IntercompanyCost of GoodsSold
50
USD
Material
Current Cost
CostAccounting
Trade In-Transit Issue
IntercompanyCost of GoodsSold
10
USD
Overhead
Current Cost
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-50
USD
Material
Current Cost
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-10
USD
Overhead
Current Cost
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyReceivable
100
USD
Not Applicable
Transfer Price
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyRevenue
-100
USD
Not Applicable
Transfer Price
Receipt Accounting generates distributions under business unit US West and inventory organization M2. CostAccounting generates distributions under cost organization CO2 and inventory organization M2.
The following table describes the receipt and cost accounting entries.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
77
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Trade ReceiptAccrual
IntercompanyAccrual
-100
USD
Not Applicable
Transfer Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
50
USD
Material
SendingOrganizationCost
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
40
USD
Prot inInventory
InternalMarkup
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-100
USD
Material,Overhead,and Prot inInventory
Transfer Price
AccountsPayable
IntercompanyAccountsPayable Invoice
IntercompanyAccrual
100
USD
Not Applicable
Transfer Price
AccountsPayable
IntercompanyAccountsPayable Invoice
IntercompanyLiability
-100
USD
Not Applicable
Transfer Price
CostAccounting
Trade SalesIssue
Deferred Costof Goods Sold
50
USD
Material
SendingOrganizationCost
CostAccounting
Trade SalesIssue
Deferred Costof Goods Sold
10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade SalesIssue
Deferred Costof Goods Sold
40
USD
Prot inInventory
InternalMarkup
CostAccounting
Trade SalesIssue
Trade In-Transit
-50
USD
Material
SendingOrganizationCost
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
78
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Trade SalesIssue
Trade In-Transit
-10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade SalesIssue
Trade In-Transit
-40
USD
Prot inInventory
InternalMarkup
The customer returns goods directly to China Ltd.
The following gure illustrates accounting entries for the return ow from US Inc (Sold-to Legal Entity) to China Ltd(Legal Entity).
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
79
Legend LE = Legal Entity BU = Business Unit MAT = Material OVH = Overhead IC = Intercompany COGS = Cost of Goods Sold DCOGS = Deferred COGS AR = Accounts Receivable AP = Accounts payable GP = Gross Profit Cst Org = Cost Organization Inv Org = Inventory Organization IO = Interorganization
RMA Receipt Dr Inentory MAT $50 Dr Inventory OVH $10 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10
Trade In-Transit Return Receipt Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Cr IC COGS MAT $50 Cr IC COGS OVH $10
China Ltd (LE)CN (Profit Ctr BU)
CO1 (Cst Org)M1 (Inv Org)
Trade Receipt Accrual Dr IC Accrual $100 Cr Trade Clearing $100
Trade In-Transit Return Dr Trade Clearing $100 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10 Cr Trade In-Transit GP $40
Trade Sales Return Receipt Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Dr Trade In-Transit GP $40 Cr DCOGS MAT $50 Cr DCOGS OVH $10 Cr DCOGS GP $40
US Inc (Sold-to LE)US West (Sold-to Profit Ctr
BU)CO2 (Sold-to Cst Org)M2 (Sold-to Inv Org)
IC AP Debit Memo Dr IC Liability $100 Cr IC Accrual $100
Customer AR Credit Memo Dr Revenue $120 Cr Receivable $120
RMA Gain/Loss Recognition Dr Deferred RMA Gain/Loss MAT $50 Dr Deferred RMA Gain/Loss OVH $10 Dr Deferred RMA Gain/Loss GP $40 Cr RMA Gain/Loss MAT $50 Cr RMA Gain/Loss OVH $10 Cr RMA Gain/Loss GP $40
Customer
IC AR Credit Memo Dr IC Revenue $100 Cr IC Receivable $100
Receipt Accounting generates distributions under business unit US West and inventory organization M2. CostAccounting generates distributions under cost organization CO2 and inventory organization M2.
The following table describes those receipt and cost accounting entries.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReturnAccrual
IntercompanyAccrual
100
USD
Not Applicable
Transfer Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
80
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReturnAccrual
Trade Clearing
-100
USD
Not Applicable
Transfer Price
CostAccounting
Trade In-Transit Return
Trade Clearing
100
USD
Split into threelines (Material,Overhead,and Prot inInventory)
Transfer Price
CostAccounting
Trade In-Transit Return
Trade In-Transit
-50
USD
Material
SendingOrganizationCost
CostAccounting
Trade In-Transit Return
Trade In-Transit
-10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade In-Transit Return
Trade In-Transit
-40
USD
Prot inInventory
InternalMarkup
AccountsPayable
IntercompanyAccountsPayable DebitMemo
IntercompanyLiability
100
USD
Not Applicable
Transfer Price
AccountsPayable
IntercompanyAccountsPayable DebitMemo
IntercompanyAccrual
-100
USD
Not Applicable
Transfer Price
CostAccounting
Trade SalesReturn Receipt
Trade In-Transit
50
USD
Material
SendingOrganizationCost
CostAccounting
Trade SalesReturn Receipt
Trade In-Transit
10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade SalesReturn Receipt
Trade In-Transit
40
USD
Prot inInventory
InternalMarkup
CostAccounting
Trade SalesReturn Receipt
Deferred RMAGain/Loss
-50
USD
Material
SendingOrganizationCost
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
81
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Trade SalesReturn Receipt
Deferred RMAGain/Loss
-10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade SalesReturn Receipt
Deferred RMAGain/Loss
-40
USD
Prot inInventory
InternalMarkup
Receipt Accounting generates distributions under business unit CN and inventory organization M1. Cost Accountinggenerates distributions under cost organization CO1 and inventory organization M1.
The following table describes those accounting entries.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
RMA Receipt
Inventory*
50
USD
Material
Current Cost
CostAccounting
RMA Receipt
Inventory
10
USD
Overhead
Current Cost
CostAccounting
RMA Receipt
Trade In-Transit
-50
USD
Material
Current Cost
CostAccounting
RMA Receipt
Trade In-Transit
-10
USD
Overhead
Current Cost
CostAccounting
Trade In-Transit ReturnReceipt
Trade In-Transit
50
USD
Material
Current Cost
CostAccounting
Trade In-Transit ReturnReceipt
Trade In-Transit
10
USD
Overhead
Current Cost
CostAccounting
Trade In-Transit ReturnReceipt
IntercompanyCost of GoodsSold
-50
USD
Material
Current Cost
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
82
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Trade In-Transit ReturnReceipt
IntercompanyCost of GoodsSold
-10
USD
Overhead
Current Cost
AccountsReceivable
IntercompanyAccountsReceivableCredit Memo
IntercompanyRevenue
100
USD
Not Applicable
Transfer Price
AccountsReceivable
IntercompanyAccountsReceivableCredit Memo
IntercompanyReceivable
-100
USD
Not Applicable
Transfer Price
* Inventory is received at the current cost, and the dierence between transfer price and cost is booked as cost variance.
Example of Accounting of Global Procurement Trade Transactionsinto ExpenseOracle Fusion Receipt Accounting and Oracle Fusion Cost Accounting process transactions and create distributions forglobal procurement purchases that are received into expense destinations rather than inventory, and for services thatare expensed.
The following is an example of accounting performed by Cost Accounting and Receipt Accounting for a globalprocurement ow into expense. It illustrates:
• Transactions that are captured in Oracle Fusion Supply Chain Financial Orchestration and interfaced to ReceiptAccounting and Cost Accounting.
• Accounting entries that Receipt Accounting and Cost Accounting generate for the forward ow of goods orservices from the supplier, through the intermediary distributor, to the nal receiving organization.
• Accounting entries that Receipt Accounting and Cost Accounting generate for the return ow from thereceiving organization to the supplier.
ScenarioChina Supplier ships the goods to US Inc. and the goods ow through an intermediary distributor, China Ltd.
Transactions from Oracle Fusion Supply Chain Financial OrchestrationThe global procurement trade agreement, accounting rule sets, and associated purchase orders are set up in SupplyChain Financial Orchestration, and the transactions ow into Receipt Accounting and Cost Accounting based on thissetup:
• Purchase Order (PO) price from China Supplier to China Ltd is USD 50.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
83
• Intercompany transfer price from China Ltd to US Inc is USD 100.
• Intercompany invoicing is set to Yes.
• Prot tracking is set to Yes.
• Overhead rule is congured in Cost Accounting for transaction type Trade in-Transit Receipt in costorganization CO1.
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the forward and return shipment of goods.
Accounting Entries
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
84
The following gure illustrates the accounting entries for the forward ow from China Ltd (sold-to legal entity) to US Inc(receiving legal entity).
China Supplier
Trade Receipt Accrual Dr Trade Clearing $50 Cr Accrual $50
Trade In-Transit Receipt Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Cr Trade Clearing $50 Cr OVH Absorption $10
Trade In-Transit Issue Dr IC COGS MAT $50 Dr IC COGS OVH $10 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10
IC AR Invoice Dr IC Receivable $100 Cr IC Revenue $100
Supplier Invoice Dr Accrual $50 Cr Liability $50
Trade Receipt Accrual Dr Trade Clearing $100 Cr IC Accrual $100
Trade In-Transit ReceiptDr Trade In-Transit $100Cr Trade Clearing $100
IC AP Invoice Dr IC Accrual $100 Cr IC Liability $100
PO Receipt Dr Receiving Inspection $100 Cr Trade In-Transit $100
Legend LE = Legal Entity BU = Business Unit MAT = Material OVH = Overhead IC = Intercompany COGS = Cost of Goods Sold AR = Accounts Receivable AP = Accounts payable GP = Gross Profit Cst Org = Cost Organization Inv Org = Inventory Organization
China Ltd (Sold-to LE)CN (Sold-to Profit Ctr BU)
CO1 (Sold-to Cst Org)M1 (Sold-to Inv Org)
US Inc (Receiving LE)US West (Receiving Profit
Ctr BU)CO2 (Receiving Cst Org)M2 (Receiving Inv Org)
PO Delivery Dr Expense $100 Cr Receiving Inspection $100
Receipt Accounting generates distributions under business unit CN and inventory organization M1. Cost Accountinggenerates distributions under cost organization CO1 and inventory organization M1.
The following table describes those receipt and cost accounting entries.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
85
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
50
USD
Not Applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Accrual
-50
USD
Not Applicable
PO Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
50
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-50
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit Receipt
OverheadAbsorption
-10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit Issue
IntercompanyCOGS
50
USD
Material
PO Price
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-50
USD
Material
PO Price
CostAccounting
Trade In-Transit Issue
IntercompanyCOGS
10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-10
USD
Overhead
Overhead Rate
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyReceivable
100
USD
Not Applicable
Transfer Price
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyRevenue
-100
USD
Not Applicable
Transfer Price
ReceiptAccounting
SupplierInvoice
Accrual
50
USD
Not Applicable
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
86
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
SupplierInvoice
Liability
-50
USD
Not Applicable
PO Price
Receipt Accounting generates distributions under business unit US West and inventory organization M2. CostAccounting generates distributions under cost organization CO2 and inventory organization M2.
The following table describes those receipt and cost accounting entries.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Trade ReceiptAccrual
IntercompanyAccrual
-100
USD
Not Applicable
Transfer Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
100
USD
Material
Transfer Price
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-100
USD
Material
Transfer Price
AccountsPayable
IntercompanyAccountsPayable Invoice
IntercompanyAccrual
100
USD
Not Applicable
Transfer Price
AccountsPayable
IntercompanyAccountsPayable Invoice
IntercompanyLiability
-100
USD
Not Applicable
Transfer Price
ReceiptAccounting
PO Receipt
ReceivingInspection
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
PO Receipt
Trade In-Transit
-100
USD
Not Applicable
Transfer Price
ReceiptAccounting
PO Delivery
Expense
100
USD
Not Applicable
Transfer Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
87
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
PO Delivery
ReceivingInspection
-100
USD
Not Applicable
Transfer Price
US Inc. returns goods directly to China Supplier.
The following gure illustrates the accounting entries for the return ow from legal entity US Inc. to legal entity ChinaLtd .
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
88
China Supplier
Trade Return Accrual Dr Accrual $50 Cr Trade Clearing $50
Trade In-Transit Return Dr Trade Clearing $50 Dr Cost Variance $10 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10
Trade In-Transit Ret Rec Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Cr IC COGS MAT $50 Cr IC COGS OVH $10
IC AR Invoice Dr IC Revenue $100 Cr IC Receivable $100
Supplier Invoice Dr Liability $50 Cr Accrual $50
Trade Return Accrual Dr IC Accrual $100 Cr Trade Clearing $100
Trade In-Transit ReturnDr Trade Clearing $100Cr Trade In-Transit $100
IC AP Invoice Dr IC Liability $100 Cr IC Accrual $100
Return to Vendor Dr Trade In-Transit $100 Cr Receiving Inspection $100
Legend LE = Legal Entity BU = Business Unit MAT = Material OVH = Overhead IC = Intercompany COGS = Cost of Goods Sold AR = Accounts Receivable AP = Accounts payable GP = Gross Profit Cst Org = Cost Organization Inv Org = Inventory Organization Ret Rec = Return Receipt
China Ltd (Sold-to LE)CN (Sold-to Profit Ctr BU)
CO1 (Sold-to Cst Org)M1 (Sold-to Inv Org)
US Inc (Receiving LE)US West (Receiving Profit
Ctr BU)CO2 (Receiving Cst Org)M2 (Receiving Inv Org)
Return to ReceivingDr Receiving Inspection $100Cr Expense $100
Receipt Accounting generates distributions under business unit US West and inventory organization M2. CostAccounting generates distributions under cost organization CO2 and inventory organization M2.
The following table describes those receipt and cost accounting entries.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
89
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReturnAccrual
IntercompanyAccrual
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Trade ReturnAccrual
Trade Clearing
-100
USD
Not Applicable
Transfer Price
CostAccounting
Trade In-Transit Return
Trade Clearing
100
USD
Material
Transfer Price
CostAccounting
Trade In-Transit Return
Trade In-Transit
-100
USD
Material
Transfer Price
ReceiptAccounting
Return toReceiving
ReceivingInspection
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Return toReceiving
Expense
-100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Return toSupplier
Trade In-Transit
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Return toSupplier
ReceivingInspection
-100
USD
Not Applicable
Transfer Price
AccountsPayable
IntercompanyAccountsPayable Invoice
IntercompanyLiability
100
USD
Not Applicable
Transfer Price
AccountsPayable
IntercompanyAccountsPayable Invoice
IntercompanyAccrual
-100
USD
Not Applicable
Transfer Price
Receipt Accounting generates distributions under business unit CN and inventory organization M1. Cost Accountinggenerates distributions under cost organization CO1 and inventory organization M1.
The following table describes those receipt and cost accounting entries.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
90
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReturnAccrual
IntercompanyAccrual
50
USD
Not Applicable
PO Price
ReceiptAccounting
Trade ReturnAccrual
Trade Clearing
-50
USD
Not Applicable
PO Price
CostAccounting
Trade In-Transit Return
Trade Clearing
50
USD
Material
PO Price
CostAccounting
Trade In-Transit Return
Cost Variance*
10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit Return
Trade In-Transit
-50
USD
Material
PO Price
CostAccounting
Trade In-Transit Return
Trade Clearing
-10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit ReturnReceipt
Trade In-Transit
50
USD
Material
PO Price
CostAccounting
Trade In-Transit ReturnReceipt
Trade In-Transit
10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit ReturnReceipt
IntercompanyCost of GoodsSold
-50
USD
Material
PO Price
CostAccounting
Trade In-Transit ReturnReceipt
IntercompanyCost of GoodsSold
-10
USD
Overhead
Overhead Rate
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyRevenue
100
USD
Not Applicable
Transfer Price
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyReceivables
-100
USD
Not Applicable
Transfer Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
91
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
SupplierInvoice
Liability
50
USD
Not Applicable
PO Price
ReceiptAccounting
SupplierInvoice
Accrual
-50
USD
Not Applicable
PO Price
*Inventory is depleted at the current cost, and the dierence between transfer price and cost is booked as cost variance.
Example of Accounting of Interorganization Transfers Within theSame Business UnitAn interorganization transfer is a trade transaction involving the movement of goods or services between organizationsin the supply chain. When the transfer occurs between organizations within the same prot center business unit, thetransfer is always at cost and there is no intercompany invoicing. Oracle Fusion Cost Accounting creates the tradeevents and they do not ow through Oracle Fusion Supply Chain Financial Orchestration.
The following is an example of accounting performed by Oracle Fusion Receipt Accounting and Oracle Fusion CostAccounting for an interorganization transfer of goods between inventory organizations within the same prot centerbusiness unit.
ScenarioInventory organization M1 makes a transfer of goods to inventory organization M2. Both inventory organizations areunder the prot center business unit US West, which is under the legal entity US Inc.
Interorganization TransferThe cost of goods transferred from M1 to M2 is USD 50 plus overhead of USD 10.
AnalysisReceipt Accounting and Cost Accounting create accounting entries for the transfer of goods.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
92
The following gure illustrates those accounting entries.
Trade Receipt Accrual Dr Trade Clearing $60 Cr IO Payable $60
Trade In-Transit ReceiptDr Trade In-Transit MAT $50Dr Trade In-Transit OVH $10Cr Trade Clearing $60
Interorganization Delivery Dr Inventory MAT $50 Dr Inventory OVH $10 Cr Receiving Inspection $60
Legend LE = Legal Entity BU = Business Unit MAT = Material OVH = Overhead IC = Intercompany COGS = Cost of Goods Sold AR = Accounts Receivable AP = Accounts payable GP = Gross Profit Cst Org = Cost Organization Inv Org = Inventory Organization IO = Interorganization
US Inc (Receiving LE)US West (Receiving Profit
Ctr BU)CO2 (Receiving Cst Org)M2 (Receiving Inv Org)
Interorganization ReceiptDr Receiving Inspection $60Cr Trade In-Transit $60
In-Transit Shipment Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Cr Inventory MAT $50 Cr Inventory OVH $10
Trade In-Transit Issue Dr IO Receivable $60 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10
US Inc (Shipping LE)US West (Shipping Profit
Ctr BU)CO1 (Shipping Cst Org)M1 (Shipping Inv Org)
Accounting EntriesReceipt Accounting generates distributions under business unit US West and inventory organization M1. CostAccounting generates distributions under cost organization CO1 and inventory organization M1.
The following table describes the cost accounting entries.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
93
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
In-TransitShipment
Trade In-Transit
50
USD
Material
Current Cost
CostAccounting
In-TransitShipment
Trade In-Transit
10
USD
Overhead
Current Cost
CostAccounting
In-TransitShipment
Inventory
-50
USD
Material
Current Cost
CostAccounting
In-TransitShipment
Inventory
-10
USD
Overhead
Current Cost
CostAccounting
Trade In-Transit Issue
InterorganizationReceivable
60
USD
Material +Overhead
Current Cost
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-50
USD
Material
Current Cost
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-10
USD
Overhead
Current Cost
Receipt Accounting generates distributions under business unit US West and inventory organization M2. CostAccounting generates distributions under cost organization CO2 and inventory organization M2.
The following table describes the receipt and cost accounting entries.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
60
USD
Not Applicable
SendingOrganizationCost
ReceiptAccounting
Trade ReceiptAccrual
InterorganizationPayable
-60
USD
Not Applicable
SendingOrganizationCost
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
50
USD
Material
SendingOrganizationCost
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
94
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-60
USD
Material +Overhead
SendingOrganizationCost
ReceiptAccounting
InterorganizationReceipt
ReceivingInspection
60
USD
Not Applicable
SendingOrganizationCost
ReceiptAccounting
InterorganizationReceipt
Trade In-Transit
-60
USD
Not Applicable
SendingOrganizationCost
CostAccounting
InterorganizationDelivery
Inventory
50
USD
Material
SendingOrganizationCost
CostAccounting
InterorganizationDelivery
Inventory
10
USD
Overhead
SendingOrganizationCost
CostAccounting
InterorganizationDelivery
ReceivingInspection
-60
USD
Material +Overhead
SendingOrganizationCost
Tax Accounting for Receipt TransactionsTo comply with tax regulations, calculate taxes and generate tax distributions for all receipt transactions. You cancapture item prices, inclusive and exclusive taxes on your purchases. Receipt costs are adjusted to account inclusivetaxes that were included in the item purchase price. Inclusive taxes are booked to a tax liability or recovery account.
You congure the tax point basis and tax point date in Oracle Fusion Financials. Based on this conguration, taxes arecalculated either on delivery or invoice generation. For more information about conguring and calculating taxes, seethe Oracle Financials Cloud Using Tax guide available on the Oracle Help Center.
Prerequisites
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
95
Congure the following to automatically calculate and account taxes. You must have the Application ImplementationConsultant role to do these tasks.
• In the Oerings work area, enable the Tax Calculation on Receipt Accounting Distributions feature at theFinancials oering level.
• Enable delivery-based tax calculation for invoices:a. In the Setup and Maintenance work area, go to the following:
• Oering: Financials• Functional Area: Transaction Tax• Task: Manage Conguration Owner Tax
b. From the Conguration Owner drop-down list, select the relevant business unit.c. From the Application Name drop-down list, select Payables.d. From the Event Class drop-down list, select Standard Invoices.e. From the Tax Point Basis drop-down list, select Invoice.f. From the Tax Point Date drop-down list, select Receipt Date.
For more information about conguring and calculating taxes, see the Oracle Financials Cloud Using Taxguide available on the Oracle Help Center.
• Congure the application to automatically calculate taxes for trade receipt accrual:a. In the Setup and Maintenance work area, go to the following:
• Oering: Manufacturing and Supply Chain Materials Management• Functional Area: Supply Chain Financial Flows• Task: Manage Supply Chain Financial Orchestration System Options
b. Select Calculate tax for trade receipt accrual.
• Congure the application to automatically calculate and account nonrecoverable taxes on intercompanyinvoices:
a. Navigate to the Financial Orchestration work area.b. In the Tasks pane, click Manage Documentation and Accounting Rules.c. Click the required documentation and accounting rule.d. Under Required Tasks, select Intercompany Invoices.
How Taxes are Calculated and Accounted
Here's how taxes are calculated and accounted for dierent combinations of tax point basis and tax point dates:
Tax Point Basis Tax Point Date Tax Calculation Tax Accounting Variance Calculationand Accounting
Delivery
Receipt Date
Taxes are calculated ongoods receipt
Recoverable andnonrecoverable taxesare accounted ongoods receipt
Not Applicable
Invoice
Receipt Date
Taxes are calculated ongoods receipt
• Nonrecoverabletaxes are
Not Applicable
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
96
Tax Point Basis Tax Point Date Tax Calculation Tax Accounting Variance Calculationand Accounting
accounted ongoods receipt
• Recoverabletaxes areaccountedon invoicegeneration
Invoice
Invoice Date
Taxes are calculated oninvoice generation
Recoverable andnonrecoverable taxesare accounted oninvoice generation
Tax variance iscalculated andaccounted fordierence in the taxesestimated on purchaseorder and nal taxcalculated on invoice
Receipt Accounting receives transactions and related tax determinants from outside sources such as Oracle FusionReceiving, Inventory, and Accounts Payable. The following discusses:
• Import of tax determinants into Receipt Accounting
• Tax distributions created by Receipt Accounting
• Tax distributions by Cost Accounting
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
97
• Review of tax distributions
Receiving
Accounts PayableInventory
Transactions and Tax
Determinants
Receipt Accounting
Cost Accounting
Create Cost Accounting DistributionsCreate Receipt
Accounting Distributions and Calculate Taxes
Review Receipt Accounting Distributions
and Tax Details
Review Cost Accounting Distributions and
Inventory Valuation
Tax Calculations
Acquisition Cost Processor
Transactions
Import Tax DeterminantsHere's how you can import transactions and related tax determinants from outside sources on the Scheduled Processespage in the Scheduled Processes work area.
• Select the Transfer Transactions from Receiving to Receipt Accounting process to import receipt transactionsinto Receipt Accounting.
• Select the Transfer Costs to Cost Management process to import accounts payable transactions into ReceiptAccounting and Cost Accounting.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
98
Tax Distributions by Receipt AccountingThe Receipt Accounting Processor calls the Tax Application Programming Interface to calculate transaction taxes basedon imported tax determinants. The processor also generates tax distributions for receipt transactions.
Run the Receipt Accounting Processor on the Create Receipt Accounting Distributions page in the Receipt Accountingwork area.
Tax Distributions by Cost AccountingThe Cost Accounting Processor uses tax results generated by Receipt Accounting to calculate inventory acquisitioncosts including nonrecoverable taxes.
Run the Cost Accounting Processor on the Create Cost Accounting Distributions page in the Cost Accounting work area.
Review Tax DistributionsOn the Review Receipt Accounting Distributions page in the Receipt Accounting work area view results of the ReceiptAccounting Processor:
• Distributions and journal entries for receipt transactions
• Tax determinants accessed by clicking the links in the Tax Determinants column
• Transaction taxes accessed by clicking the Transaction Unit Cost links in the Cost Information tab
On the Review Cost Accounting Distributions page in the Cost Accounting work area view results of the Cost AccountingProcessor:
• Distributions and journal entries for inventory transactions
• Inventory unit costs including taxes in the Cost Information tab
Example of Tax Accounting for a Simple Procurement TransactionThis example illustrates tax accounting performed by Oracle Fusion Receipt Accounting and Oracle Fusion CostAccounting for a simple procurement transaction that uses a tax point basis of delivery, that is, taxes are accounted atreceipt of the goods.
ScenarioThe supplier makes a shipment to the inventory organization based on a purchase order (PO) for USD 1,000, with thefollowing tax details:
• Tax A delivery basis = 10%. Recoverable and nonrecoverable portions are both 50%
• Tax B invoice basis = 20%. Recoverable and nonrecoverable portions are both 50%
Tax Details at Receipt and InvoiceTax details at the time of receipt of goods are:
• Tax A delivery basis = 15%, which is changed from 10% estimated at the time of purchase order. Recoverableand nonrecoverable portions are both 50%, which is equal to USD 75 (that is, USD 1,000 * 15% * 50%).
• Tax B invoice basis = 25%, which is changed from 20% estimated at the time of PO. Recoverable andnonrecoverable portions are both 50%, which is equal to USD 125 (that is, USD 1,000 * 25% * 50%).
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
99
Tax details at the time of invoice are:
• Tax A delivery basis = 20%, which is changed from 15% reported and accounted on receipt. Recoverable andnonrecoverable portions are both 50%, however taxes are not recalculated because this transaction uses a taxpoint basis of delivery.
• Tax B invoice basis = 30%, which is changed from 25% estimated on receipt. Recoverable and nonrecoverableportions are both 50%, which is equal to USD 150.
AnalysisReceipt Accounting and Cost Accounting create accounting distributions when the goods are received and when theinvoice is accounted.
Tax Accounting EntriesReceipt Accounting and Cost Accounting generate the following accounting entries at the time of receipt:
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
PO Receipt
ReceivingInspection
1,000
USD
Material
PO Price
ReceiptAccounting
PO Receipt
ReceivingInspection
75
USD
Tax
Tax A Delivery-BasedNonrecoverable:USD 1,000 *15% * 50%
ReceiptAccounting
PO Receipt
TaxRecoverable
75
USD
Tax
Tax A Delivery-BasedRecoverable:USD 1,000 *15% * 50%
ReceiptAccounting
PO Receipt
ReceivingInspection
125
USD
Tax
Tax B Invoice-BasedNonrecoverable:USD 1,000 *25% * 50%
ReceiptAccounting
PO Receipt
SupplierAccrual
-1,275
USD
Not applicable
Not applicable
CostAccounting
PO Delivery
InventoryValuation
1,200*
USD
Not applicable
Not applicable
CostAccounting
PO Delivery
ReceivingInspection
-1,200*
USD
Not applicable
Not applicable
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
100
*PO price plus nonrecoverable taxes A and B.
Accounts Payable generates the following accounting entries for the supplier when invoice is created:
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
AccountsPayable
Invoice
SupplierAccrual
1,275
USD
Not applicable
Not applicable
AccountsPayable
Invoice
TaxRecoverable
150
USD
Tax
Tax B Invoice-BasedRecoverable:USD 1,000 *30% * 50%
AccountsPayable
Invoice
Tax B RateVariance*
25
USD
Not applicable
Dierencebetween taxestimated at25% and actualcalculated at30%
AccountsPayable
Invoice
SupplierLiability
-1,450
USD
Not applicable
Not applicable
*Tax variance due to the dierence between rates at time of delivery versus invoice.
Receipt Accounting and Cost Accounting generate the following accounting entries when invoice is accounted:
Subledger Event Type Accounting Line Type Amount in FunctionalCurrency +Dr/-Cr
Functional Currency
Receipt Accounting
Invoice Price
Receiving Inspection
25
USD
Receipt Accounting
Invoice PriceAdjustment
Tax B Rate Variance*
-25
USD
Cost Accounting
Acquisition CostAdjustment
Inventory Valuation**
25
USD
Cost Accounting
Acquisition CostAdjustment
Receiving Inspection
-25
USD
*Tax variance due to the dierence between tax rates at time of delivery versus invoice.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
101
**Inventory acquisition cost adjustment for nonrecoverable tax B.
Example of Tax Accounting for a Consigned Inventory TransactionThis example illustrates tax accounting performed by Oracle Fusion Receipt Accounting and Oracle Fusion CostAccounting for a consigned inventory transaction in the supply chain. This transaction uses a tax point basis of delivery,that is, taxes are accounted at receipt of the goods.
ScenarioThe supplier makes a consigned shipment to the inventory organization based on a consigned purchase order (PO) forUSD 1,000 with the following tax details:
• Tax A delivery basis = 10%. Recoverable and nonrecoverable portions are both 50%
• Tax B invoice basis = 20%. Recoverable and nonrecoverable portions are both 50%
Tax Details at Receipt and InvoiceTax details at the consigned receipt of goods are:
• Item value = USD 1,000
• Tax A delivery basis = 15%, which is changed from 10% estimated at the time of PO. Recoverable andnonrecoverable portions are both 50%, or USD 75, that is, USD 1,000 * 15% * 50%.
• Tax B invoice basis = 25%, which is changed from 20% estimated at the time of PO. Recoverable andnonrecoverable portions are both 50%, or USD 125, that is, USD 1,000 * 25% * 50%.
Tax details at the time of invoice are:
• Item value = USD 1,000
• Tax A delivery basis = 20%. Recoverable and nonrecoverable portions are both both 50%, however taxes arenot recalculated because this transaction uses a tax point basis of delivery.
• Tax B invoice basis = 30%, which is changed from 25% estimated at the time of receipt. Recoverable andnonrecoverable portions are both 50%, or USD 150.
AnalysisReceipt Accounting and Cost Accounting create accounting distributions when the consigned good are received, whenthe status changes from consigned to owned, and when the invoice is accounted.
Tax Accounting EntriesReceipt Accounting and Cost Accounting generate the following accounting entries at the time of receipt of consignedgoods:
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Consigned POReceipt
ConsignedClearing
1,000
USD
Material
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
102
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Consigned POReceipt
ConsignedClearing
75
USD
Tax
Tax A Delivery-BasedNonrecoverable:USD 1,000 *15% * 50%
ReceiptAccounting
Consigned POReceipt
ConsignedClearing
125
USD
Tax
Tax B Invoice-BasedNonrecoverable:USD 1,000 *25% * 50%
ReceiptAccounting
Consigned POReceipt
ConsignedAccrual
-1,200
USD
Not applicable
Not applicable
CostAccounting
Consigned PODelivery
ConsignedInventory*
1,200
USD
Not applicable
Not applicable
ReceiptAccounting
Consigned PODelivery
ConsignedClearing
-1,200
USD
Not applicable
Not applicable
*PO price plus nonrecoverable taxes A and B.
Receipt Accounting and Cost Accounting generate the following accounting entries at the time of change of status fromconsigned to owned stock:
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedAccrual
1,000
USD
Material
PO Price
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedAccrual
75
USD
Not applicable
Tax A Delivery-BasedNonrecoverable:USD 1,000 *15% * 50%
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedAccrual
125
USD
Not applicable
Tax B Invoice-BasedNonrecoverable:
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
103
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
USD 1,000 *15% * 50%
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedClearing
-1,200
USD
Not applicable
Not applicable
CostAccounting
Transfer toOwned Issue
ConsignedInventoryOset
1,000
USD
Material
PO Price
CostAccounting
Transfer toOwned Issue
ConsignedInventoryOset
75
USD
NonrecoverableTax
Tax A Delivery-BasedNonrecoverable
CostAccounting
Transfer toOwned Issue
ConsignedInventoryOset
125
USD
NonrecoverableTax
Tax B Invoice-BasedNonrecoverable
CostAccounting
Transfer toOwned Issue
ConsignedInventory
-1,200
USD
Not applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
1,000
USD
Not applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
75
USD
Not applicable
Tax A Delivery-BasedNonrecoverable
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
125
USD
Not applicable
Tax B Invoice-BasedNonrecoverable
ReceiptAccounting
Trade ReceiptAccrual
TaxRecoverable*
75
USD
Not applicable
Tax A Delivery-BasedRecoverable
ReceiptAccounting
Trade ReceiptAccrual
SupplierAccrual
-1,275
USD
Not applicable
Not applicable
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
1,000
USD
Not applicable
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
104
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
75
USD
Not applicable
Tax A Delivery-BasedNonrecoverable
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
125
USD
Not applicable
Tax B Invoice-BasedNonrecoverable
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-1,200
USD
Not applicable
Not applicable
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
1,000
USD
Material
PO Price
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
75
USD
NonrecoverableTax
Tax A Delivery-BasedNonrecoverable
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
125
USD
NonrecoverableTax
Tax B Invoice-BasedNonrecoverable
CostAccounting
Transferto Owned(Receipt)
Trade In-Transit
-1,200
USD
Not applicable
Not applicable
*Delivery-based recoverable tax A is calculated on consigned receipt but will be accounted after ownership changeevent.
Accounts Payable generates the following accounting entries when the invoice is created:
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Accounts Payable
Invoice
Supplier Accrual
1,275
USD
Not applicable
Accounts Payable
Invoice
Tax B Recovery
150
USD
Tax B Invoice-Based Recoverable
Accounts Payable
Invoice
Tax B RateVariance*
25
USD
Not applicable
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
105
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Accounts payable
Invoice
Supplier Liability
-1,450
USD
Not applicable
*Tax variance due to the dierence between tax rates at time of delivery versus invoice.
Receipt Accounting and Cost Accounting generate the following accounting entries when invoice is accounted:
Subledger Event Type Accounting Line Type Amount in FunctionalCurrency +Dr/-Cr
Functional Currency
Receipt Accounting
Invoice PriceAdjustment
Trade Clearing
25
USD
Receipt Accounting
Invoice PriceAdjustment
Tax B Rate Variance*
-25
USD
Cost Accounting
Acquisition CostAdjustment
Inventory Valuation**
25
USD
Cost Accounting
Acquisition CostAdjustment
Trade Clearing
-25
USD
*Tax variance due to the dierence between tax rates at time of delivery versus invoice.
**Inventory acquisition cost adjustment for nonrecoverable tax B.
Example of Tax Accounting for a Purchase Order Retroactive PriceChangeThis example illustrates tax accounting performed by Oracle Fusion Receipt Accounting and Oracle Fusion CostAccounting for a retroactive price change on a purchase order (PO) receipt that is partially invoiced.
ScenarioThe supplier makes a shipment to the inventory organization based on a purchase order for 10 units, at a per unit priceof USD 100. After receipt of the goods, a partial invoice is created for 2 units at USD 100 per unit.
The purchase order price changes retroactively from USD 100 to USD 120. The remaining balance of 8 units is invoicedat USD 120 per unit.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
106
Tax DetailsThis transaction uses a tax point basis of delivery, that is, taxes are accounted at the time of receipt of goods.
Taxes details are the same after the retroactive price change on the PO:
• Tax A delivery basis = 20%. Recoverable and nonrecoverable portions are both 50%.
• Tax B invoice basis = 30%. Recoverable and nonrecoverable portions are both 50%.
AnalysisReceipt Accounting and Cost Accounting create accounting distributions at the time of receipt of goods, after theretroactive purchase order price change, and for the dierential invoice.
Tax Accounting EntriesReceipt Accounting and Cost Accounting generate the following accounting entries at the time of receipt of goods:
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
PO Receipt
ReceivingInspection
1,000
USD
Material
PO Price
ReceiptAccounting
PO Receipt
ReceivingInspection
100
USD
Tax
Tax A Delivery-BasedNonrecoverable:USD 1,000 *20% * 50%
ReceiptAccounting
PO Receipt
TaxRecoverable(Tax A)
100
USD
Tax
Tax A Delivery-BasedRecoverable:USD 1,000 *20% * 50%
ReceiptAccounting
PO Receipt
ReceivingInspection
150
USD
Tax
Tax B Invoice-BasedNonrecoverable:USD 1,000 *30% * 50%
ReceiptAccounting
PO Receipt
SupplierAccrual
-1,350
USD
Material
Not applicable
CostAccounting
PO Delivery
InventoryValuation
1,250*
USD
Not applicable
Not applicable
CostAccounting
PO Delivery
ReceivingInspection
-1,250*
USD
Not applicable
Not applicable
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
107
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
*PO price plus nonrecoverable taxes A and B.
Accounts Payable generates the following accounting entries for the supplier when partial invoice is accounted:
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
AccountsPayable
Invoice
SupplierAccrual
270*
USD
Not applicable
Item Price plusNonrecoverableTaxes A andB for 2 units =USD 1,350/10* 2
AccountsPayable
Invoice
TaxRecoverable
30
USD
Tax
Tax B Invoice-BasedRecoverable:USD 200 * 30%* 50%
AccountsPayable
Invoice
SupplierLiability
-300
USD
Not applicable
Not applicable
*Accrual is debited to the extent quantity is invoiced, which is 2 units.
Receipt Accounting and Cost Accounting generate the following accounting entries after the retroactive purchase orderprice change:
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
RetroactivePriceAdjustment
ReceivingInspection
160*
USD
Material
USD 120 -USD 100 *uninvoicedquantity of 8units
ReceiptAccounting
RetroactivePriceAdjustment
ReceivingInspection
16
USD
Tax
Tax A Delivery-BasedNonrecoverable:
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
108
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
USD 160 * 20%* 50%
ReceiptAccounting
RetroactivePriceAdjustment
TaxRecoverable(Tax A)
16
USD
Tax
Tax A Delivery-BasedRecoverable:USD 160 * 20%* 50%
ReceiptAccounting
RetroactivePriceAdjustment
ReceivingInspection
24
USD
Tax
Tax B Invoice-BasedNonrecoverable:USD 160 * 20%* 50%
ReceiptAccounting
RetroactivePriceAdjustment
SupplierAccrual
-216
USD
Material
Not applicable
CostAccounting
AcquisitionCostAdjustment
InventoryValuation
200**
USD
Not applicable
Not applicable
CostAccounting
AcquisitionCostAdjustment
ReceivingInspection
-200
USD
Not applicable
Not applicable
*Retroactive price adjustment accounted only for the uninvoiced quantity, that is, 10 units received minus 2 unitsinvoiced = 8 units uninvoiced.
** Retroactive PO price change plus nonrecoverable taxes A and B.
Accounts Payable generates the following accounting entries for the balance of 8 units:
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Accounts Payable
Invoice
Supplier Accrual
960
USD
Item Price USD 120* 8
Accounts Payable
Invoice
Supplier Accrual
96
USD
Tax A Delivery-BasedNonrecoverable:USD 120 * 8 * 20%* 50%
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
109
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Accounts Payable
Invoice
Supplier Accrual
96
USD
Tax A Delivery-BasedRecoverable: USD120 * 8 * 20% *50%
Accounts Payable
Invoice
Supplier Accrual
144
USD
Tax B Invoice-BasedNonrecoverable:USD 120 * 8 * 30%* 50%
Accounts Payable
Invoice
Recoverable Tax B
144
USD
Tax B Invoice-BasedRecoverable: USD120 * 8 * 30% *50%
Accounts Payable
Invoice
Supplier Liability
-1,440
USD
Not applicable
Accounts Payable generates the following accounting entries for the original invoice quantity of 2 units at the revisedPO price:
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Accounts Payable
Invoice
Invoice PriceVariance
40
USD
Dierence in POItem Price USD 20* 2
Accounts Payable
Invoice
Tax Invoice PriceVariance Tax A
4
USD
Tax A Delivery-BasedNonrecoverable
Accounts Payable
Invoice
Tax Invoice PriceVariance Tax B
6
USD
Tax B Invoice-BasedNonrecoverable
Accounts Payable
Invoice
Recoverable Tax A
4
USD
Tax A Delivery-Based Recoverable
Accounts Payable
Invoice
Recoverable Tax B
6
USD
Tax B Invoice-Based Recoverable
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
110
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Accounts Payable
Invoice
Supplier Liability
-60
USD
Not applicable
Cost Accounting and Receipt Accounting generate the following accounting entries for the dierential invoice:
Subledger Event Type Accounting Line Type Amount in FunctionalCurrency +Dr/-Cr
Functional Currency
Receipt Accounting
Invoice PriceAdjustment
Receiving Inspection
50
USD
Receipt Accounting
Invoice PriceAdjustment
Invoice PriceAdjustment
-40
USD
Receipt Accounting
Invoice PriceAdjustment
Tax Invoice PriceAdjustment
-10*
USD
Cost Accounting
Acquisition CostAdjustment
Inventory Valuation
50**
USD
Cost Accounting
Acquisition CostAdjustment
Receiving Inspection
-50
USD
*Nonrecoverable taxes A and B on the dierential invoice price.
**Dierence between invoice price and nonrecoverable taxes A and B.
Example of Tax Accounting for Interorganization Transfers AcrossBusiness UnitsThis example illustrates tax accounting performed by Oracle Fusion Receipt Accounting and Oracle Fusion CostAccounting for interorganization transfers across business units.
ScenarioVision Operations ships the goods to Singapore Operations. The organizations are in two dierent prot centerbusiness units.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
111
Transactions from Oracle Fusion Supply Chain Financial OrchestrationThe trade agreement, accounting rule sets, and associated purchase orders are set up in Supply Chain FinancialOrchestration, and the transactions ow into Receipt Accounting and Cost Accounting based on this setup:
• Vision Operations acquires goods locally at the cost of USD 12.
• Intercompany transfer price from Vision Operations to Singapore Operations is USD 15, with the following taxdetails:
◦ Exclusive Tax A = 1.5 USD.
◦ Recoverable and nonrecoverable portions are both same, that is, 50%.
• Order is for 1 unit.
• Prot tracking is set to Yes.
• Intercompany Invoicing is set to Yes.
• Vision Operations books a prot of USD 3 (USD 15 transfer price - USD 12 acquisition cost).
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the transfer of goods.
Accounting Entries
Accounting entries are created for shipment of goods from the legal entity Vision Operations to the other legal entitySingapore Operations.
The following table describes the accounting entries for the shipping organization, that is, for Vision Operations:
Subledger Event Type Account Line Type Cost Element Amount in FunctionalCurrency +Dr/-Cr
Cost Accounting
Transfer OrderShipment
Trade In-Transit
Item Cost
12
Cost Accounting
Transfer OrderShipment
Inventory Valuation
Item Cost
-12
Cost Accounting
Trade In-Transit Issue
Intercompany Cost ofGoods Sold
Item Cost
12
Cost Accounting
Trade In-Transit Issue
Trade In-Transit
Item Cost
-12
Accounts Receivable
IntercompanyAccounts ReceivableInvoice
IntercompanyReceivable
Transfer Price
15
Accounts Receivable
IntercompanyAccounts ReceivableInvoice
Intercompany Revenue
Transfer Price
-15
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
112
Subledger Event Type Account Line Type Cost Element Amount in FunctionalCurrency +Dr/-Cr
Accounts Receivable
IntercompanyAccounts ReceivableInvoice
IntercompanyReceivable
Total Tax
1.5
Accounts Receivable
IntercompanyAccounts ReceivableInvoice
Tax Liability
Total Tax
-1.5
The following table describes the accounting entries for the receiving organization, that is, for Singapore Operations:
Event Event Type Account Line Type Cost Element Amount in FunctionalCurrency +Dr/-Cr
Receipt Accounting
Trade Receipt Accrual
Trade Clearing
Transfer Price
15
Receipt Accounting
Trade Receipt Accrual
Trade Clearing
Nonrecoverable Tax
0.75
Receipt Accounting
Trade Receipt Accrual
Intercompany Accrual
Transfer Price
-15
Receipt Accounting
Trade Receipt Accrual
Intercompany Accrual
Nonrecoverable Tax
-0.75
Receipt Accounting
Transfer Order Receipt
Receiving Inspection
Transfer Price
15
Receipt Accounting
Transfer Order Receipt
Receiving Inspection
Nonrecoverable Tax
0.75
Receipt Accounting
Transfer Order Receipt
Trade In-Transit
Transfer Price
-15
Receipt Accounting
Transfer Order Receipt
Trade In-Transit
Nonrecoverable Tax
-0.75
Cost Accounting
Trade In-TransitReceipt
Trade In-Transit
Item Cost
12
Cost Accounting
Trade In-TransitReceipt
Trade Clearing
Item Cost
-12
Cost Accounting
Trade In-TransitReceipt
Trade In-Transit
Nonrecoverable Tax
0.75
Cost Accounting
Trade In-TransitReceipt
Trade Clearing
Nonrecoverable Tax
-0.75
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
113
Event Event Type Account Line Type Cost Element Amount in FunctionalCurrency +Dr/-Cr
Cost Accounting
Trade In-TransitReceipt
Trade In-Transit
Prot In Inventory
3
Cost Accounting
Trade In-TransitReceipt
Trade Clearing
Prot In Inventory
-3
Cost Accounting
Transfer Order Receipt
Inventory Valuation
Item Cost
12
Cost Accounting
Transfer Order Receipt
Receiving Inspection
Item Cost
-12
Cost Accounting
Transfer Order Receipt
Inventory Valuation
Nonrecoverable Tax
0.75
Cost Accounting
Transfer Order Receipt
Receiving Inspection
Nonrecoverable Tax
-0.75
Cost Accounting
Transfer Order Receipt
Inventory Valuation
Prot In Inventory
3
Cost Accounting
Transfer Order Receipt
Receiving Inspection
Prot In Inventory
-3
Accounts Payable
IntercompanyAccounts PayableInvoice
Intercompany Accrual
Transfer Price
15
Accounts Payable
IntercompanyAccounts PayableInvoice
Intercompany Liability
Transfer Price
-15
Accounts Payable
IntercompanyAccounts PayableInvoice
Intercompany Accrual
Nonrecoverable Tax
0.75
Accounts Payable
IntercompanyAccounts PayableInvoice
Intercompany Liability
Nonrecoverable Tax
-0.75
Accounts Payable
IntercompanyAccounts PayableInvoice
Tax Recoverable
Recoverable Tax
0.75
Accounts Payable
IntercompanyAccounts PayableInvoice
Intercompany Liability
Recoverable Tax
-0.75
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
114
Example of Tax Accounting for Internal Drop ShipmentsThis example illustrates tax accounting performed by Oracle Fusion Receipt Accounting and Oracle Fusion CostAccounting for internal drop shipment.
ScenarioVision Operations drop ships the goods to the customer of Singapore Operations.
Transactions from Oracle Fusion Supply Chain Financial OrchestrationThe trade agreement, accounting rule sets, and associated purchase orders are set up in Supply Chain FinancialOrchestration, and the transactions ow into Receipt Accounting and Cost Accounting based on this setup:
• Vision Operations acquires goods locally at the cost of USD 12.
• Intercompany transfer price from Vision Operations to Singapore Operations is USD 15, with the following taxdetails:
◦ Exclusive Tax A = 1.5 USD.
◦ Recoverable and nonrecoverable portions are both same, that is, 50%.
• Order is for 1 unit.
• Prot tracking is set to Yes.
• Intercompany Invoicing is set to Yes.
• Vision Operations books a prot of USD 3 (USD 15 transfer price - USD 12 PO price).
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the transfer of goods.
Accounting Entries
Accounting entries are created for shipment of goods from the legal entity Vision Operations to the other legal entitySingapore Operations.
The following table describes the accounting entries for the shipping organization, that is, for Vision Operations:
Subledger Event Type Account Line Type Cost Element Amount in FunctionalCurrency +Dr/-Cr
Cost Accounting
Sales Order Shipment
Trade In Transit
Item Cost
12
Cost Accounting
Sales Order Shipment
Inventory Valuation
Item Cost
-12
Cost Accounting
Trade In Transit Issue
Intercompany Cost ofGoods Sold
Item Cost
12
Cost Accounting Trade In Transit Issue Trade In Transit Item Cost -12
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
115
Subledger Event Type Account Line Type Cost Element Amount in FunctionalCurrency +Dr/-Cr
Accounts Receivable
IntercompanyAccounts ReceivableInvoice
IntercompanyReceivable
Transfer Price
15
Accounts Receivable
IntercompanyAccounts ReceivableInvoice
Intercompany Revenue
Transfer Price
-15
Accounts Receivable
IntercompanyAccounts ReceivableInvoice
IntercompanyReceivable
Total Tax
1.5
Accounts Receivable
IntercompanyAccounts ReceivableInvoice
Tax Liability
Total Tax
-1.5
The following table describes the accounting entries for the receiving organization, that is, for Singapore Operations:
Subledger Event Type Account Line Type Cost Element Amount in FunctionalCurrency +Dr/-Cr
Receipt Accounting
Trade Receipt Accrual
Trade Clearing
Transfer Price
15
Receipt Accounting
Trade Receipt Accrual
Trade Clearing
Nonrecoverable Tax
0.75
Receipt Accounting
Trade Receipt Accrual
Intercompany Accrual
Transfer Price
-15
Receipt Accounting
Trade Receipt Accrual
Intercompany Accrual
Nonrecoverable Tax
-0.75
Cost Accounting
Trade In TransitReceipt
Trade In Transit
Item Cost
12
Cost Accounting
Trade In TransitReceipt
Trade Clearing
Item Cost
-12
Cost Accounting
Trade In TransitReceipt
Trade In Transit
Nonrecoverable Tax
0.75
Cost Accounting
Trade In TransitReceipt
Trade Clearing
Nonrecoverable Tax
-0.75
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
116
Subledger Event Type Account Line Type Cost Element Amount in FunctionalCurrency +Dr/-Cr
Cost Accounting
Trade In TransitReceipt
Trade In Transit
Prot In Inventory
3
Cost Accounting
Trade In TransitReceipt
Trade Clearing
Prot In Inventory
-3
Cost Accounting
Trade Sales Issue
Deferred Cost of GoodsSold
Item Cost
12
Cost Accounting
Trade Sales Issue
Trade In Transit
Item Cost
-12
Cost Accounting
Trade Sales Issue
Deferred Cost of GoodsSold
Nonrecoverable Tax
0.75
Cost Accounting
Trade Sales Issue
Trade In Transit
Nonrecoverable Tax
-0.75
Cost Accounting
Trade Sales Issue
Deferred Cost of GoodsSold
Prot In Inventory
3
Cost Accounting
Trade Sales Issue
Trade In Transit
Prot In Inventory
-3
Cost Accounting
Cost of Goods SoldRecognition
Cost of Goods Sold
Item Cost
12
Cost Accounting
Cost of Goods SoldRecognition
Deferred Cost of GoodsSold
Item Cost
12
Cost Accounting
Cost of Goods SoldRecognition
Cost of Goods Sold
Nonrecoverable Tax
0.75
Cost Accounting
Cost of Goods SoldRecognition
Deferred Cost of GoodsSold
Nonrecoverable Tax
-0.75
Cost Accounting
Cost of Goods SoldRecognition
Cost of Goods Sold
Prot In Inventory
3
Cost Accounting
Cost of Goods SoldRecognition
Deferred Cost of GoodsSold
Prot In Inventory
-3
Accounts Payable
IntercompanyAccounts PayableInvoice
Intercompany Accrual
Transfer Price
15
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
117
Subledger Event Type Account Line Type Cost Element Amount in FunctionalCurrency +Dr/-Cr
Accounts Payable
IntercompanyAccounts PayableInvoice
Intercompany Liability
Transfer Price
-15
Accounts Payable
IntercompanyAccounts PayableInvoice
Intercompany Accrual
Nonrecoverable Tax
0.75
Accounts Payable
IntercompanyAccounts PayableInvoice
Intercompany Liability
Nonrecoverable Tax
-0.75
Accounts Payable
IntercompanyAccounts PayableInvoice
Tax Recoverable
Recoverable Tax
0.75
Accounts Payable
IntercompanyAccounts PayableInvoice
Intercompany Liability
Recoverable Tax
-0.75
Note: Inventory is received at the current cost, and the dierence between transfer price and cost is bookedas cost variance.
Overview of Reports and Analytics for ReceiptAccountingYou can use the Reports and Analytics work area to access predened reports and analytics that are related to your role,and to modify existing reports and analytics.
The following reports and analytics are available for Receipt Accounting.
• Accrual Clearing Report
• Accrual Reconciliation Report
• Uninvoiced Receipt Accrual Report
• Receipt Accounting Real Time
• Receipt Accounting Period Close Real Time
• Landed Costs Real Time
For more information on accessing and modifying reports and analytics, refer to the guide Creating and AdministeringAnalytics and Reports.
For descriptions of the reports and analyses, and information on accessing them, see the topic Oracle Supply ChainManagement Cloud: View Supply Chain Management Reports and Analyses.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
118
Related Topics
• Overview of Creation and Administration of SCM Analytics and Reports
• Oracle Supply Chain Management Cloud: View Supply Chain Management Reports and Analyses
• Reports and Analytics Work Area and Panel Tab
• Business Intelligence Catalog
• SCM Subject Areas in Oracle Transactional Business Intelligence
FAQs for Receipt Accounting
What is the recommended sequence for scheduling of receiptaccounting processes?The recommended sequence for scheduling the receipt accounting processes is:
1. Incoming transactions:
◦ Transfer Transactions from Receiving to Receipt Accounting process. Interfaces receipt transactions.
◦ Transfer Costs from Payables to Cost Management process. Interfaces accounts payable transactions.
2. Receipt accounting:
◦ Receipt Accounting Distribution process.
◦ Clear Receipt Accrual Balances process. Executes only if you have predened accrual clearing rules.Marks purchase orders for automatic clearing.
◦ Receipt Accounting Distribution process. Creates distributions for cleared accrual balances.
3. Subledger accounting:
◦ Create Accounting process.
4. Reconciliation and reporting:
◦ Match Receipt Accruals process. Matches purchase order receipt accruals with invoices from the payablesapplication. Perform at period close or as needed for internal reporting and reconciliation.
Note: You can also perform this step before running the subledger accounting processto know the approximate accrual amount for reconciliation.
◦ Audit Receipt Accrual Clearing Balances process. Audit the General Ledger accounted accrual balances.
What are the accounting distribution basis options for consignedinventory transactions?You can perform cost accounting of consigned inventory transactions using zero value or actual cost. Typically, thevaluation on the balance sheet for supplier-owned consigned inventory is zero. But you may sometimes want to
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
119
perform accounting using actual cost. In either case, the inventory valuation reports always display the pro forma valueof consigned goods.
Select the accounting distribution basis for consigned inventory on the Manage Cost Proles page in the Setup andMaintenance work area.
What's a tax point basis?A point in the receipt transaction process where taxes are accounted and reported to the tax authorities. These can beclassied into two categories: delivery-based and invoice-based tax points.
Delivery-based taxes are accounted and reported on the receipt transaction. Invoice-based taxes are accounted andreported when the supplier invoice is created, accounted, or paid.
What's a tax point date?Tax point date is the date on which the tax is calculated. Tax point date can be either the receipt date or invoice date.Tax rate as on the tax point date is considered for tax calculation.
Tax point date is used in conjunction with tax point basis. For more information about conguring and calculating taxes,see the Oracle Financials Cloud Using Tax guide available on the Oracle Help Center.
When are nonrecoverable taxes calculated on Intercompanytransactions?When trade receipt accrual occurs in the receiving organization, the receipt accounting distributions are created for:
• internal material transfers
• internal drop shipments
• intercompany returns
When creating receipt accounting distributions, both recoverable and nonrecoverable taxes are calculated andaccounted. The item cost includes both transfer price and nonrecoverable exclusive tax accrued in the receivingorganization.
For material return transactions, tax is calculated only if the referenced transaction has taxes on it.
What's the dierence between inclusive basis and exclusive basisin tax calculations?Inclusive taxes are included in the assessable value or purchase price. For example:
• PO amount: USD 100
• Inclusive tax rate: 10%
• Tax: 100/1.10 = USD 9.09 (distribution amount divided by (1 + tax rate))
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 2Receipt Accounting
120
Exclusive taxes are added to the purchase price or assessable value. For example:
• PO amount: USD 100
• Exclusive tax rate: 10%
• Tax: 100*0.10 = USD 10.00 (distribution amount multiplied by tax rate)
How can I create subledger account rules and subledger journalentry rule sets for receipt accounting?Create your subledger account rules on the Manage Account Rules page. It is recommended that you highlight theaccount rules predened by Oracle, copy, and modify them as needed.
Create your subledger journal entry rule sets on the Manage Subledger Journal Entry Rule Sets page. It isrecommended that you highlight the journal entry rule sets predened by Oracle, copy, and modify them as needed.For each journal line rule specify the copied account combination rule.
In the Setup and Maintenance work area, you can access both the Manage Account Rules task and the ManageSubledger Journal Entry Rule Sets task in the Manufacturing and Supply Chain Materials Management oering.
Note: You must congure the account rules and journal entry rule sets before proceeding with the setup ofsubledger accounting rules for receipt accounting.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 3Cost Planning
121
3 Cost Planning
Cost Planning ProcessCost Management provides robust support for planning, costing and analysis of manufacturing costs. You candetermine which work denitions to use in costing, eciently enter material, resource, and overhead costs usingspreadsheet import, and perform cost roll up. You can use multiple simultaneous costs, for example, one for ocialexternal reporting, and one for your internal simulations. It oers exible, user dened account defaulting rules andvaluation policies using cost proles. In terms of cost analysis, you can view costs by work order, operation, costelement, and variances.
The following topics describe the cost planning tasks:
• Conguring Item Aributes to Enable Costing
• Estimating Standard Costs
• Managing Resource Rates
• Managing Overhead Rates
• Estimating Standard Costs for Assemblies
• Cost Processing for Deactivated Work Denitions
Conguring Item Aributes to Enable CostingThe following Costing prerequisite seings should be congured on the Manage Items page of the Product InformationManagement work area:
• Costing Enabled. Set this aribute to Yes to report, value, and account for item costs.
• Include in Rollup. Set this aribute to Yes to include an item in the cost rollup.
For more information on conguring Product Information Management seings for Cost Planning, see the guide UsingProduct Master Data Management.
Estimating Standard CostsYou can use the Manage Standard Costs task in the Cost Accounting work area to create estimated standard costs forall purchased items. The standards are created for a scenario, which is in turn mapped to a cost organization and costbook. The cost estimation process includes the following functionality:
• Cost Estimates for purchased items can be shared across all of the inventory organizations mapped to the costorganization and pointing to the same valuation unit.
• Estimated costs for purchased items can be entered directly in the UI or imported using a spreadsheet.
• You can enter estimates for one or more cost elements.
• If you enter a cost estimate for an overhead cost element, you can specify an expense pool.
• If you want to absorb costs against multiple expense pools, you can enter multiple rows for overhead costs.
• Standard cost material overheads can be dened for CTO model work denitions. The CTO model overhead isapplied to congured items created from the model's work denition.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 3Cost Planning
122
• The logical receipt for a drop shipped standard costed item is costed at its eective standard cost. Thevaluation of logical receipts is aligned with the valuation of physical purchase order receipts.
• Estimated costs for purchased items can have eective dates that are in the past, current, or in the future.
• Cost estimates for purchased items can be revised using the mass edit functionality and can be increased ordecreased by a percentage or a specic value.
• You can calculate standard costs for congurations on Purchase Order approval, and use these costs tocalculate variances at purchase receipt.
• You can initiate and run multiple simultaneous standard cost roll ups. You can submit a request and run a costroll up for a cost organization even if a prior cost roll up for that organization hasn't yet completed.
Managing Resource RatesResources are set up in the Manufacturing application. The Costed option in the resource denition must be selected inManufacturing to enable estimating resource rates in Cost Accounting. Resource Rates can be entered when a resourceis created in Manufacturing, or can be entered in Cost Accounting on the Manage Resource Rates page. Any pool ofexpenses can be absorbed by resource rates. You can dene hourly rates for labor and for equipment. A resource canhave one or many rates, each absorbing a share of a pool of expenses. You can enter multiple rows of resource rates toabsorb multiple pools of expenses.
Managing Overhead RatesPlant Overheads, such as lighting and security, are absorbed by the cost object Item as a percentage of the materialcost. Work Center Overheads are absorbed by the cost objects as a percentage of the resource cost. You can use anycombination of resource rates and overhead rates to absorb factory costs into the work in process and nished goodsinventory value. When you use overhead rates to absorb factory expenses, you can dene rates as a percentage ofmaterial, or you can dene hourly work center rates.
Overhead absorption rates are date-eective, enabling you to set dierent absorption rates for each quarter. You canhave one or many rates at dierent levels, such as at Inventory Organization, Item Category, or Item level. Each levelabsorbs a share of the pool of expenses. These rates are used in cost roll up of an item and are published with therolled-up item cost. All of the indirect costs modeled as overhead are absorbed by the Work in Process cost object whenpublished to cost accounting.
Estimating Standard Costs for AssembliesYou can use the cost planning scenario to estimate the rolled-up cost of the manufactured items based on the selectedwork denitions. You can perform incremental cost roll-ups to estimate manufactured item costs, and incorporate mid-period corrections and rolling forecasts into estimates. You can use the Roll Up Costs task on the Manage Cost Scenariopage to calculate the total product costs.
The cost roll-up process calculates the unit cost to produce an item in two steps. The total cost is calculated as thexed cost operations plus the variable costs (the unit resource cost multiplied by the quantity consumed). The per-unit cost is calculated as the total divided by the cost quantity. The cost roll-up experience is designed to facilitate aninteractive cost estimation process. You can review errors reported, review the work denitions being used for costroll-up, change your work denition selection criteria, and modify component purchase prices and the resource rateas many times as required. Once you're happy with the cost calculations, you can publish the scenario to be used forstandard cost accounting using the Update Standard Costs task on the Manage Cost Scenario Page. You can use theUndo Cost Update task to reverse the eects of any unintended cost updates.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 3Cost Planning
123
Cost Processing for Deactivated Work DenitionsWhen a product or a production line becomes obsolete, the aected work denitions can be deactivated to make themunavailable for use in downstream supply chain activities. When a work denition is deactivated, the header is updatedwith an inactive status, and with a date that species when the work denition became inactive. This prevents usage ofthe work denition in supply chain planning, work execution, and cost rollup.
Any released work orders, or published cost scenarios that reference an inactive work denition version, can continue touse it. In the event that a deactivated work denition has been used in an existing, unpublished cost scenario, cost rolluphas to be re-run. Planning collections can be performed again to select the eective work denitions.
After a work denition is deactivated, you can't reactivate the work denition or make changes of any kind to any of itsversions, and its work denition name can't be reused for the item. As a result, there is a clear separation between theobsolete and the active work denitions. This facilitates downstream supply chain activities.
Create a Cost Planning ScenarioYou can dene the cost scope for cost organization and cost book combinations by using a cost scenario. You must useseparate cost scenarios for planning the costs for regular items and that for congured items.
1. From the Navigator menu, select Cost Accounting.2. From the Tasks panel, select Manage Cost Scenarios.3. Click on the plus icon to launch the Create Cost Scenario page.4. Enter a name for the cost scenario and select the appropriate Cost Organization and Cost Book.5. Select the Eective Date for the cost scenario.
This is the date on which the estimated standard costs for materials, resources, and overheads will be eectiveas published frozen standard costs. The eective date can be the current date or any future or past date.Retroactive costs are supported by default. Multiple cost scenarios can have the same eective date.
Note: For the work denition costs to be processed, the eective date of a cost scenariomust be same as or later than that of a manufacturing work denition.
6. Select the Scenario Type to dene whether the cost scenario is for regular items or congured items.7. Specify the work denition selection criteria.
Field Description
Use Latest Work Denitions Select this option to ensure that the Roll Up Costs process checks for the latest work
denition changes from Manufacturing every time the process is run.
If you don't select this option, the process will use the denitions from the previouspublished cost scenario.
Work Denition Priority Dene the priority for selecting the work denitions by using any combination of these
options:
◦ Top production priority
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 3Cost Planning
124
Field Description
◦ Top costing priority
◦ Work denition name
If you select more than one option, you can dene the order in which the options must beconsidered by using the up and down arrow buons.
Work Denition If you select work denition name when dening Work Denition Priority, you must select
the work denition to be considered for the cost roll up.
Rollup Scope Dene the criteria to select items for cost roll up by the cost scenario. The available options
are:
◦ All Items - The cost roll up will include all items with an active work denition in theproduction plant.
◦ Selected Items - The cost roll up will include only the selected items. Click the plusicon to search and select the required items from the Select and Add: Items dialog
◦ Select Item Categories - The cost roll up will include only the items from the selectedcategory. Click the plus icon to search and select the required items from the Selectand Add: Item Categories dialog.
◦ Where Used - The cost roll up will include only those manufactured items wherecomponent costs have changed. Use this option to avoid changing standard costs ofitems that aren't impacted by component cost changes. If selected, the Use LatestWork Denitions option is ignored.
Single-level Cost Rollup Indicates that the cost roll up will be single level. This option is available only when you set
the Rollup Scope as Selected Items or Selected Item Categories. Using single level rollup ensures that the cost of only the rst level of the item structure for the selected itemsare rolled up. This helps in calculating the cost of specic items without recalculating costof its sub-assemblies. If you don't select a single level roll up, the selected items and all thecorresponding subassembly costs are rolled up.
8. Click Save and Close.
Once you have created a cost scenario, you can dene the material, resource, and overhead rates in the cost scenario.You can manually run the processes such as Roll up Costs and Update Standard Costs from the cost scenario.Alternately, you can schedule these processes to run at periodic intervals.
Create Standard CostsYou can use a Cost Scenario to create standard costs, and dene the associated valuation unit, cost element, andexpense pool.
1. From the Navigator menu, select Cost Accounting.2. From the Tasks panel, select Manage Standard Costs under Cost and Prot Planning.3. On the Manage Standard Costs page, click the Create icon in the Search Results region.4. On the Create Standard Cost page, complete the following elds:
◦ Cost Scenario. Select the Cost Scenario that you want to create costs for.
◦ Item
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 3Cost Planning
125
◦ Valuation Unit
5. In the Standard Cost Details region, complete the following elds: Cost Element, Cost Element Type, Unit Cost,and Expense Pool (if applicable), and click Done.
Upload Standard Costs Using ADFdiYou can use a spreadsheet for bulk data updates to material standard costs. You can create and edit costs, reviewerrors, and trigger the import process from the spreadsheet, improving eciency. You can add and update standardcosts in the online mode or in the oine mode and then update to the server. You can add item costs in bulk to a costscenario by providing the item, valuation unit, cost element, expense pool, and unit cost.
To upload a small batch of standard costs, up to 20 records, use the Create Standard Costs worksheet in thespreadsheet. To upload higher volumes of standard costs to a cost scenario, use the Import Standard Costs worksheetin the spreadsheet. The ADF Desktop Integrator is a prerequisite for capturing charges in a spreadsheet, and can beinstalled from the Tools section of the Navigator menu.
The ADF Desktop Integrator is a prerequisite for capturing costs in a spreadsheet. You can install the integrator fromthe Tools section of the Navigator menu.
1. From the Navigator menu, select Cost Accounting.2. From the Tasks panel, select Manage Cost Scenarios.3. Search for and open the required cost scenario.4. Select Manage Standard Costs from the Actions menu.5. Click Manage in Spreadsheet to download the standard cost denitions spreadsheet.6. Open the spreadsheet.7. In the dialog box, click Yes and enter your user name and password to sign-in to the application.8. Depending on the number of records you want to add and update, use the Create Standard Costs or Import
Standard Costs worksheet.
Use one of these methods to input data:
◦ Add rows in the worksheet, and enter the values in the required elds. Only the white colored cells in theworksheet can be edited.
◦ Copy and paste the populated rows into the worksheet for bulk updates.
When you update the information in a row, the Changed column of that row is automatically updated with achange indicator icon.
9. Click Upload to update the values on the server.
When you click Upload, the Interface Standard Cost process in submied. You can check the status of the process onthe Scheduled Processes page. The Row Status column in the worksheet is updated with a success or error messagefor each changed row. You can rectify the rows that have errors and again upload the data or delete the erroneousinformation from the application by running the Delete Standard Costs from Interface process.
Import Standard Costs Using File-Based Data ImportYou can use the Standard Costs Import Open Interface to import standard costs from external sources into CostManagement. Once loaded, view the data in the Cost Accounting work area, on the Manage Standard Cost Import
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 3Cost Planning
126
Exceptions page. You can validate the data by clicking on the Import Standard Costs buon, which submits the InterfaceStandard Costs process. You can view any errors resulting from the validation process on the Manage Standard CostImport Exceptions page, x the errors, and rerun the Interface Standard Costs process. After validation is complete, thedata is loaded to the Standard Costs Interface table, and to the Manage Standard Costs page of the Cost Accountingapplication. For more information on le-based data import, see the chapter on Standard Costs Import in the File BasedData Import guide for Oracle Supply Chain Management Cloud.
The following tasks should be completed before importing data using le-based data import:
• Set up the Default Cost Prole for Cost Accounting in the Setup and Maintenance work area, and set the NewItem Prole Creation option to Automatic.
• Set up a valuation unit using the Manage Valuation Units task in the Setup and Maintenance work area. Make anote of the Valuation Unit Code, which is required for the CSV le.
• Set up overhead cost elements for Cost Accounting in the Setup and Maintenance work area using the ManageCost Elements task.
To Import Standard Costs Using File-Based Data ImportTo import standard costs using File-Based Data Import, complete the following steps.
1. From the Navigator menu, select Cost Accounting.2. From the Tasks panel, select Manage Cost Scenarios.3. Create a cost planning scenario. Make a note of the scenario number, which is required for the CSV le.4. Open the Standard Costs Import le-based data import template.5. Complete the Standard Cost Headers and Standard Cost Details tabs using the instructions in the spreadsheet.6. On the CSV Generation tab click Generate CSV File.7. From the Navigator menu, select Tools, and then Scheduled Processes.8. Run the Interface Standard Costs process.
This process validates the data, creates the required Cost proles, and imports the costs into the ManageStandard Costs page.
9. Review the imported data in the Cost Accounting work area, on the Manage Standard Cost Import Exceptionspage. Correct any costs that have a status of Error, and then click on Import Standard Costs.
10. Publish the cost scenarios to make the costs available for costing transactions.
Related Topics
• Standard Cost Method
Create Resource RatesYou can use a Cost Scenario to create resource rates, and dene the associated plant, resource, cost element, expensepool, and rate.
1. From the Navigator menu, select Cost Accounting.2. From the Tasks panel, select Manage Resource Rates under Cost and Prot Planning.3. On the Manage Resource Rates page, click the Create icon in the Search Results region.4. On the Create Resource Rate page, complete the following elds:
◦ Scenario. Select the Cost Scenario that you want to create resource rates for.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 3Cost Planning
127
◦ Plant
◦ Resource
5. Select the Create icon in the Details region.6. Complete the following elds: Cost Element, Expense Pool, and Rate.
Cost AnalysisYou can use the cost simulation tools to provide detailed analysis of the rolled-up costs. You can compare costs acrossscenarios, or compare scenario costs with the current published costs, to review the dierences in cost and inventoryvalue adjustments. You can view rolled-up costs for your items by using the tree view or by using the graphicalhierarchical view. In both views, you can drill down into the details which were used to calculate the item costs. You cancreate dierent scenarios to represent dierent manufacturing and cost variables, and then compare the results. Onceyou are happy with the cost calculations, you can publish the scenario to be used for standard cost accounting.
Publish CostsYou can use the Update Standard Costs task to publish the costs to Cost Accounting. The Update Standard Coststask is accessed from the Actions menu on the Manage Cost Scenarios page. The cost update process automaticallyimplements the new standard costs dened in the Cost Scenario on the date set in the Eective Date eld. You canperform standard cost updates for a past, current, or future date.
When calculating the cost of make items, the roll up process does not include the costs consumed in optionaloperations for manufacturing work denitions. This is for operations that are executed conditionally, for example,a rework step based on inspection results in the previous operation. Similarly, output items yielded from optionaloperations in process manufacturing are also not included in the cost roll up process.
Standard cost rollup supports process manufacturing work denitions with multiple outputs, where the productionmethod requires ways to manage variability that is inherent in materials and processes. This is especially useful if yourequire a hybrid of discrete and process manufacturing capabilities. You can specify the costing batch size to determinethe standard cost of production batches, and allocate costs based on a xed cost, or a percentage of the total cost,for the primary product, co-products, and by-products. The Rollup Costs process calculates the costs of output itemswith active work denitions, based on the cost allocation dened on the work denition operations. You can use theView Rolled-up Costs page to review the cost calculations for each output item, and the manufacturing work denitiondetails.
1. From the Navigator menu, select Cost Accounting.2. Select Manage Cost Scenarios from the tasks menu.3. Search for the cost scenario that you want to publish costs for.4. On the View Cost Scenario page, select Roll up Costs from the Actions menu.5. On the Roll up Costs dialog box, select the following option: Notify me when this process ends. Click Submit,
and Done.6. Run the Update Costs process from the Actions menu to publish the costs to Cost Accounting.
FAQs for Cost Planning
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 3Cost Planning
128
Does a standard cost include overhead costs?Yes. When you dene standard costs you can include overhead cost components. The cost processor processes theseoverhead cost components as part of the total standard cost, at the time of transaction costing.
Why are standard costs not being created for my work denitions?Check the eective dates in Manufacturing and Cost Management. The start date of a Manufacturing work denitionmust be the same as or prior to the Cost Scenario Eective Date in order for the work denition costs to be processed.
How do I enable retroactive costing for standard costs?Retroactive costing is supported by default for standard costs. Use the Create Cost Scenario page in the CostAccounting work area to create retroactive standard costs.
How do I view the cost adjustments resulting from a standard costupdate?You can review the cost adjustments for a standard cost update on the Review Cost Accounting Distributions page.
Can I update, deactivate, or delete a standard cost?Yes. You can update, deactivate, or delete a standard cost created in a cost scenario as long as it has not yet been usedto cost transactions.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
129
4 Cost Accounting
Overview of Cost AccountingThe Manage Cost Accounting business process is used by cost accountants to calculate inventory transaction costs,maintain inventory valuation, generate accounting distributions for inventory transactions, analyze product costs,analyze usage of working capital for inventory, and analyze gross margins.
The following image lists the Cost Accounting tasks.
Cost Accountant
Manage Inventory Valuation
Manage Period
End
Record
Audit
Review Cost Accounting
Analyze Product Costs
• Manage Period End. Manage the timing of transaction processing, and perform validations in preparation foraccounting period close.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
130
• Manage Inventory Valuation. Adjust the cost of items to address inventory obsolescence, price changes, andother variances.
• Record, Audit, and Review Cost Accounting. Create cost accounting distributions for transaction data that isreceived from external sources, view and address any processing exceptions, and review results.
• Analyze Product Costs: View the perpetual average cost, actual cost, and standard cost details of an item, chartits cost trend, compare costs across items, analyze usage of working capital and gross margins.
Scheduled Processes for Cost AccountingYou can use the Scheduled Processes Overview page in the Tools work area to run the scheduled processes that youhave access to. You can schedule these processes to run automatically at predened frequencies, or to run on request.This table describes the scheduled processes for Cost Accounting.
Task Description
Transfer transactions from Inventory
Transfers transaction data from Inventory to Cost Accounting.
Transfer work order transactionsfrom Manufacturing
Transfers work order transaction data from Manufacturing to Cost Accounting. This processcan also be launched from the Manufacturing application: Manufacturing Execution > Tasks> Transfer Transactions from Production to Costing.
Transfer Transactions fromMaintenance to Costing
Transfers Maintenance Work Order transaction data from Enterprise Asset Management toCost Management.
Export Standard Costs
Exports standard costs for a Cost Planning Scenario in the XML format to the CostManagement directory on the Oracle Universal Content Management server. The CostManagement UCM output directory is scm/ standardCost/ export
Create Cost Accounting Distributions
Costs and creates distributions for the transactions interfaced from other applications.
Roll up Costs
Calculates the costs of output items with active work denitions, based on the cost allocationdened on the work denition operations.
Process Period End Validations
Performs validations to ensure that the transactions are successfully interfaced to costing andhave been processed successfully.
Related Topics
• Submit Scheduled Processes and Process Sets
• View Status and Other Details for Scheduled Processes
• Transfer Transactions from Production to Costing
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
131
Cost Accounting Process FlowOracle Fusion Cost Accounting creates distributions for transactions related to the physical movement of goods orservices through the supply chain and tracks the corresponding nancial changes in ownership.
The transaction data for physical shipments is interfaced to Cost Accounting from Oracle Fusion InventoryManagement, and the trade events are interfaced from Oracle Fusion Supply Chain Financial Orchestration.
This gure illustrates the ow of transaction data through the cost processors.
Create Cost Accounting Distributions
Imported Transaction
Data
Preprocessor
Cost Processor
COGS Processor
Cost Distribution Processor
Review Cost Accounting Processes
Review Cost Accounting
Distributions
Create Cost Accounting DistributionsIn the Cost Accounting work area, access the Create Cost Accounting Distributions page to process importedtransaction data. On this page dene the run controls by specifying the cost organization books and cost processorsthat you want to execute.
The main cost processors are:
• Preprocessor prepares all interfaced data for cost processing:
◦ Checks for invalid or missing data.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
132
◦ Propagates the information to cost organization books and deriving their associated units of measure,currencies, valuation units, and cost proles. Note that the preprocessor runs for all cost books in the costorganization.
◦ Maps incoming cost components to cost elements, based on user-dened mappings.
• Cost Accounting Processor processes:
◦ Physical inventory transactions
• Calculates costs for pre-processed transactions using the perpetual average cost method, actualcost method, or standard cost method.
• Processes user-entered cost adjustments and applies overhead costs based on user-denedoverhead rules.
• Calculates the variance of standard costs from actual transaction costs.• Calls the Acquisition Cost Processor to calculate inventory valuation including the tax component
where applicable.
◦ Trade transactions
• Uses the Trade Accounting Processor to process all in-transit transactions.
• Cost of Goods Sold Processor calculates the cost of goods sold and maintains consistency with the revenuerecognized in accounts receivable.
• Cost Distribution Processor uses the Intercompany Trade Accounting processor, Cost Accounting Processor,and Cost of Goods Sold Processor results to create distributions for transaction costs.
• Cost Reports Processor: Generates inventory valuation data and is the source of truth for reports generated byOracle Fusion Transactional Business Intelligence and Business Intelligence Publisher. This process builds thedata required to report inventory valuation at two levels:
◦ Valuation unit level
◦ Receipt layer level
Review Processing Results and MessagesAfter running the cost processors, check processing results in the Cost Accounting work area:
• View warning and error messages on the Review Cost Accounting Processes page.
• See additional warning and error messages specic to each transaction on the Transaction Errors tab of theReview Cost Accounting Distributions page.
Review Cost Accounting DistributionsA single inventory transaction can generate multiple cost transactions, for which Cost Accounting creates accountingdata.
In the Cost Accounting work area use the Review Cost Accounting Distributions page to see cost information anddistributions related to each transaction, as well as receipt layers for receipt transactions, and depletion layers for issuetransactions.
Related Topics
• Receipt Accounting Tasks and Accounting Events
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
133
Cost Accounting Periods
Cost Accounting PeriodsCost accounting periods enable you to monitor the timing of transaction processing, and to perform validations inpreparation for period close.
Cost periods are associated with combinations of cost organizations and cost books. When you associate a costorganization with a cost book, you also dene the cost accounting period calendar and other aributes.
Cost Period Calendar and AributesThe cost period calendar is based on the ledger that is aached to the cost organization and cost book combination. Forcost books that do not have an associated ledger, you can set the calendar and cost periods manually on the ManageCost Organization Relationships page, Cost Books tab. On this page you also dene the following cost period aributes:
• First opened period. Establishes the period when transaction accounting begins. Any transactions that precedethe rst opened period, are accounted in the rst opened period.
• Maximum open periods. Species the maximum number of concurrent periods that can be open. If the numberof periods is maximized, then no additional period can be opened until one of the open periods changes toClosed, Permanently Closed, or Pending Close status.
Related Topics
• How Cost Organizations, Inventory Organizations, and Cost Books Fit Together
Cost Cuto DatesThe run control parameters that you dene for the cost processors include the cost cuto date option and the cutodate for the cost organization books that you're processing. The cost cuto date sets the last transaction date that willbe processed for an accounting period. This enables you to continue normal business operations with no interruptionsfrom one period to the next, using the cost cuto date to dene accounting period boundaries for these transactions.
The following discusses the cost cuto date option, backdated transactions, and the costing date of transactions.
Cost Cuto Date OptionIn the Cost Accounting work area, access the Create Cost Accounting Distributions page to set the cuto date option toUser-Dened or Auto. The User-Dened option requires you to specify the cuto date, while the Auto option saves youthe eort of redening the cuto date which is automatically moved forward by the cost processor.
When you select the Auto option, the cost processor moves the cuto date forward to the last date of the earliest opencost period and then it stops, until the costing period is closed. After the period is closed, the cost processor advancesthe cuto date into the next open period, and so on. However, for a transaction, if preprocess is successful after thecuto date, then the cuto date for that cost organization book moves forward to the date of the last transaction forwhich the preprocess was successful. This could happen, for example, if you originally set the cuto date option toUser-Dened and subsequently changed it to Auto.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
134
Backdated TransactionsOne of the purposes of the cost cuto date is to allow backdating of transactions in an orderly fashion. For example,if you set the cost cuto date to October 31, you can still process October transactions that were entered in Novemberbut meant for the period ending October 31 by backdating them to October 31 or earlier. However, when the cost cutodate advances forward to a date past October 31 and other transactions are processed beyond October 31, then thebackdated transactions can no longer be processed as October transactions.
If you set a cost cuto date at October 31, the cost processor will queue up but not process any transactions with a dateafter October 31. If you subsequently need to backdate transactions to a date before October 31, you can still processthose backdated transactions as long as you don't process any transactions beyond October 31. You can also backdatetransactions to any date after October 31, with the assurance that these transactions will be processed in the correctorder when the cost cuto date moves forward.
Costing Date of TransactionsThe costing date of transactions is normally the same as the transaction date, or the cost adjustment date, except forbackdated transactions.
The cost date for backdated transactions inherits the greater of the backdated transaction date and the date of the lastprocessed transaction.
Note: The cost cuto date aects the costed date of the transaction and the inventory value that's reportedas of a given accounting date. It doesn't aect the inventory transaction date.
Cost Accounting Period ValidationsYou can use the Manage Cost Accounting Periods task in the Cost Accounting work area to perform validations toensure that all transactions are complete and accounted for on an ongoing basis and before closing the accountingperiod.
You can execute the validations one at a time, or all at once. Correct any resulting transaction errors, and rerunvalidations as needed.
ValidationsPerform cost accounting validations for periods that are in status Open, Pending Closed, or Closed. The validationscheck for the following:
• Pending interface. Transactions that are yet to be interfaced to Cost Management.
• Unprocessed transactions. Transactions that have been transferred to Cost Management and that are pendingcost processing.
• Unprocessed distributions. Costing transactions that have no distributions.
• Unprocessed journals. Subledger transactions that have no accounting entries.
• Pending deferred cost of goods sold (DCOGS) transactions. Conrm that the deferred cost of goods soldprocessor has run and transactions are transferred.
• Completed work orders not closed. Work orders that have completed but that have not yet closed.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
135
Cost Accounting Period Statuses and Transaction AccountingCost period statuses enable you to manage the timing for processing and accounting of transactions.
The following describes rules that apply under each cost period status, and how transactions are sloed into costaccounting periods.
Cost Accounting Period StatusesThe cost period statuses are as follows:
• Never Opened. Default status for new periods assigned to a cost organization and cost book. This status doesnot allow creation of distributions for transactions. You can change the status to Open, but you cannot changeit to Closed, or Permanently Closed.
• Open. A period status can be changed to Open only if the corresponding general ledger accounting period isopen. You can open several periods at a time, so long as they are contiguous. You cannot change the currentperiod to Open if the prior period status is Never Opened. When a period status is Open, inventory transactionscan be accounted in that period; when the period is not open, inventory transactions cannot be accounted inthat period, but they will be accounted in the next open period. Both costing and general ledger periods mustbe open for a transaction to be accounted; if the costing period is open but the corresponding general ledgerperiod is closed, the transaction cannot be accounted and is held pending further user action. You can changean Open period status to Closed or Pending Close.
• Pending Close. Use to stop transactions from being accounted in this period. Any new transactions enteredwith a transaction date that falls in a period that is in Pending Close status will be held pending further useraction. You can set the Pending Close status back to Open status and then process the transactions, so thatthose which fall into the period will be staged for accounting in that period; or you can set the status of theperiod to Permanently Close and set the next period to Open, in which case the transactions will be accountedin the next open period.
• Closed. You can change this status to Permanently Closed or you can revert it to Open. When you set a periodstatus to Closed, you have the option of conguring the processor to allow closing even if all validations donot pass; this enables you to decide when discrepancies are not material enough to delay period close. Youcan also congure the processor to prevent closing a period until all selected validations pass. You set yourpreferences for period close validations when you associate cost books with cost organizations, on the ManageCost Organization Relationships page, Cost Books tab.
• Permanently Closed. Closes the period for all types of transactions irreversibly. You cannot change the periodstatus to Permanently Closed without rst changing the prior period status to Closed.
Transaction Accounting DatesThe costing application is designed to set the proper accounting date for inventory transactions, even when they arenot entered into the application promptly or in the correct order. It does this by enabling backdating of transactions thatare entered on a date later than the physical transaction date. For example, suppose the physical transaction date isNovember 30, and the transaction is entered into the costing application on December 2. In this case, you can backdatethe transaction and, under certain conditions, the application will post that transaction into the prior period.
The application orders your transactions by seing the cost date. To preserve the integrity of previous calculationsand to ensure that inventory balances tie with general ledger balances, the cost date cannot be set to a date prior totransactions that are already processed. The cost processor parameters that you dene include a cost cuto date, whichlets you control the transactions that you want to process, including backdated transactions. In this example, as long asyou have not processed any transactions after November 30, the processor will set the cost date to November 30 fortransactions entered after November 30 with a backdated transaction date that is in November.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
136
Once the cost date is established, the processor performs cost accounting calculations for the transaction, createsaccounting distributions, and sets the accounting date based on the following logic:
• If the cost date falls in a Never Opened period, the accounting date becomes the same as the cost date whenthat period status is Open. In the rare case where the transaction date is in a period that precedes the rstperiod used in the application, the accounting date is set to a date in the rst subsequent period that is Open.
• If the cost date falls in a Pending Close or Closed period, you are alerted by an error message. You can reopenthe period and the processor will aempt to set the accounting date to a date in that period; or you canpermanently close the period to let the transaction accounting date move into the next Open period.
• If the cost date falls in a period that is Permanently Closed and the next period is not Open, an error messagewarns you that the transaction will remain unaccounted until a subsequent period is opened. Once thesubsequent period is Open, the accounting date of the transaction will move into that Open period.
When accounting distributions are staged within the costing subledger, the accounting distribution accounting datein the costing subledger becomes the proposed accounting date for posting into the general ledger through thesubledger. If the general ledger application accepts the proposed accounting date, the transaction is posted with thatdate. If the proposed accounting date is not accepted (for example if the general ledger period has already closed), thenthe general ledger application returns an error and the cost processor sets the proposed accounting date to a date inthe next open general ledger period.
Cost Processing
Actual Cost MethodThe actual cost method tracks the cost of each receipt into inventory. When depleting inventory, the processor logicallyidenties the receipts that are consumed to satisfy the depletion, and assigns the associated receipt costs to thedepletion.
The actual cost method uses receipt layers for transaction costing and inventory depletion.
Receipt LayersA receipt layer is created for each put away or delivery of an item into a cost organization. The item is assigned a costprole that species the valuation structure of the item, and the valuation structure, in turn, species the valuation unitof the item. The receipt layer falls within the valuation unit. Under the actual cost method, the cost processor identiesthe receipt that is used to satisfy the depletion, and applies the quantity depletion method that is dened in the costprole. The accounting application currently uses the rst in, rst out (FIFO) depletion method.
The FIFO accounting method assumes that the goods received rst are consumed rst. This logic does not require thatthe inventory be physically moved in FIFO order. In reality, the inventory may be moving out in an unknown or randomfashion, especially when the goods are fungible.
Inventory controls the physical ow of inventory, and the actual cost method can be congured to conform to the levelof physical tracking maintained for inventory. For example, if the inventory is tracking at the lot level, the costs can alsobe tracked at that level. If there is more than one receipt for a given lot, the FIFO accounting method assumes that thereceipts in the lot are consumed in FIFO order.
Receipt layers can be identied by combinations of any of the following: cost organization, inventory organization,subinventory, locator, lot, serial and grade.
The following table illustrates the process of creating receipt layers for an item within a valuation unit.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
137
Transaction Date Transaction Type Quantity Unit Cost Receipt Layer Created
01-Jan-2011
PO Receipt
100
120 USD
Receipt #1
02-Jan-2011
PO Receipt
80
100 USD
Receipt #2
03-Jan-2011
Miscellaneous Receipt
20
105 USD
Receipt #3
Inventory DepletionThis table illustrates the process of depleting the item inventory based on the created receipt layers using FIFO logic:
Transaction Date Transaction Type Quantity Unit Cost Receipt LayerCreated
Receipt LayerUsed forDepletion
01-Jan-2011
PO Receipt
100
120 USD
Receipt #1
Not applicable
02-Jan-2011
PO Receipt
80
100 USD
Receipt #2
Not applicable
03-Jan-2011
MiscellaneousReceipt
20
105 USD
Receipt #3
Not applicable
04-Jan-2011
MiscellaneousIssue
-40
120 USD
Not applicable
Receipt #1
05-Jan-2011
MiscellaneousIssue
-60
120 USD
Not applicable
Receipt #1
06-Jan-2011
MiscellaneousIssue
-15
100 USD
Not applicable
Receipt #2
Standard Cost MethodUse standard costs for inventory valuation to simplify your transaction accounting. For items that use other costmethods for transaction accounting (such as the perpetual average cost method), you can still use standard costs forsimulation and planning purposes.
This topic includes the following:
• Conguring item aributes to enable costing
• Seing up and updating standard costs
• Inventory value adjustments based on standard costs
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
138
Conguring Item Aributes to Enable CostingThe following Costing prerequisite seings should be congured on the Manage Items page of the Product InformationManagement work area:
• Costing Enabled. Set this aribute to Yes to report, value, and account for item costs.
• Include in Rollup. Set this aribute to Yes to include an item in the cost rollup.
For more information on conguring Product Information Management seings for Cost Planning, see the guide UsingProduct Master Data Management.
Seing Up and Updating Standard CostsDene the standard cost for a new item based on purchase information such as quotes from vendors, purchasecontracts, or bill of material. Periodically review the variance between actual transaction costs and the standard cost ofan item, and update the standard cost to ensure that it is close to actual costs.
Inventory Value Adjustments Based on Standard CostWhen you implement a new standard cost for an item, the standard cost processor automatically creates accountingadjustments to update inventory value. The adjustment is based on the revaluation of on-hand inventory as of theeective start date for the current standard cost. The adjustment amount is calculated as follows:
Cost Adjustment = (New Standard Cost minus Current Standard Cost) multiplied by Quantity on Hand
Related Topics• How do I view the cost adjustments resulting from a standard cost update
Standard Cost Denition ProcessYou can create standard costs by:
• Importing them from external sources and legacy applications
• Dening them manually in the costing application
Importing Standard CostsTo import standard cost data from external sources, you must load it into the Standard Cost Interface Table using theapplication interface or spreadsheet. Once loaded, view the data in the Cost Accounting work area, on the ManageStandard Cost Import Exceptions page, and validate the data by running the Import Standard Costs process. On thispage you can also view any errors resulting from the validation process, x the errors, and rerun the Import StandardCosts process. After validation is complete, the data are loaded into the Standard Costs Interface Table.
Dening Standard CostsIn the Cost Accounting work area, use the Manage Standard Cost Denitions page to view imported standard coststhat have been validated, and standard costs that are published from standard cost planning, and also to create newstandard costs..
Related Topics• Cost Planning Process• Can I update, deactivate, or delete a standard cost
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
139
Review Item CostsOn the Review Item Costs page view the perpetual average cost, actual cost, or standard cost details of items, chart costtrends, and compare cost records.
The options available for analyzing item costs are:
• Cost details
• Transaction costs
• Cost comparisons
Cost DetailsView the perpetual average cost, actual cost, or standard cost of an item for combinations of a cost organization, costbook, and valuation unit. View these costs for a current date or any date in the past.
The Cost Details page displays additional information on:
• Cost breakdown: the item cost details for a receipt record. The breakdown is available by cost element, costelement type, and analysis group.
• Cost history: the cost trend of an item over a period of time.
• Depletions: the layer consumption for issues out of a receipt record.
• Cost information: the cost details from the source transaction for a receipt record.
Transaction CostsSelect a time frame to view the perpetual average cost, actual cost, or standard cost history of an item, or specify thenumber of days for the moving average cost calculation.
For each transaction contributing to the item cost history, you can view the cost elements, transaction source,document number, quantity on hand prior to the transaction, transaction date, and transaction quantity.
Cost ComparisonsCompare the cost details for up to six records of:
• Several items
• One item across several cost organizations or cost books
• One item over a period of time
Related Topics• Manage Cost Elements and Analysis Groups• How Cost Components, Cost Elements, and Cost Component Groups Work Together
Cost Adjustments and Cost DistributionsAdjust the cost of items to manage obsolescence, or to mark down inventory to address "lower of cost or marketrequirements", price changes, and variances. You can make adjustments to the perpetual average cost of items,purchase order and miscellaneous receipt costs, and layer inventory cost.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
140
This gure illustrates the process for making cost adjustments, processing them, and viewing results.
Perpetual Average Item Cost
Adjustments
Cost Processor
Receipt Cost
Adjustments
Distribution Processor
Accounting Distributions
for Adjustments
Updated Item Costs
Layer Inventory
Cost Adjustments
The costing application enables you to adjust costs, process them, and create the corresponding cost accountingdistributions.
Entering Cost AdjustmentsAdjust the cost of items on the Create Cost Adjustments page. You can make three kinds of adjustments forcombinations of a cost organization, cost book, valuation unit, and cost element.
If you want to track the adjustment through the supply chain, use a cost element of type Adjustment:
• Perpetual average item cost. Enter the new average unit cost. The processor will automatically adjust the overallaverage cost for the quantity on hand.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
141
• Receipt cost. The receipt cost is adjusted by an update from purchasing or accounts payable, or you canmanually enter new receipt costs, PO receipts, interorganization receipts, miscellaneous receipts, or RMAreceipts. The processor will automatically adjust the cost of the remaining receipt quantity.
• Layer inventory cost. You can adjust the unit cost of items that use the actual cost method. The processor willautomatically adjust the value of the on-hand receipt layer quantity.
You can bundle multiple records, such as multiple receipts or valuation units, into a single adjustment transaction, andwhen submied, they are assigned an adjustment number. Optionally, you can also specify a reason code.
Save the adjustment and review the impact to inventory valuations based on the quantity on hand at the time ofadjustment. Do this prior to nal submission for cost processing, so that you can revise as necessary. After nal reviewand submission, you can still void the adjustment, provided it is not yet processed by the cost processor. However, theadjustment cannot be reversed once processed. Accordingly, the adjustment status code is automatically set to: S forsubmied, C for voided, or P for pending processing.
Processing AdjustmentsWhen you review and submit a cost adjustment, the cost processor creates a new adjustment transaction:
• For a perpetual average item cost adjustment, the processor updates the perpetual average cost of the itemin that combination of cost organization, cost book, item, and valuation unit. The processor then applies theperpetual average item cost adjustment against inventory valuation at the rate of quantity on hand times thechange in cost.
• For a receipt cost adjustment, the processor updates the receipt cost for the portion of the receipt that is partof the current on-hand balance. The portion of the adjustment aributable to what is no longer part of the on-hand balance will be accounted for with a write o distribution. However, if the cost prole of the item has costpropagation enabled, the processor revalues the issue transactions that were consumed out of the receipt.
• For a layer inventory cost adjustment, the processor updates the unit cost of the item in that combination ofcost organization, cost book and valuation unit. The processor then updates inventory valuation at the rate ofquantity on hand times the change in cost.
Example 1: Assume a receipt of 8 units, all of which are currently on hand. The valuation unit has a total of 10 units onhand. You adjust the cost of the receipt from $10 to $11 per unit. The processor adjusts the average cost by $0.80 (thatis, 8/ (Division symbol) 10 * (Multiplication symbol) $1).
Example 2: Assume a receipt of 8 units, of which 6 units are currently on hand, and 2 units have been depleted. Thevaluation unit has a total of 10 units on hand. You manually adjust the cost of the receipt from $10 to $11 per unit.The processor adjusts the receipt cost by $6 (that is, 6 *(Multiplication symbol) $1), and creates a write o accountingdistribution of $2 (that is, 2 * (Multiplication symbol) $1).
Example 3: Assume a valuation unit has a total of 7 units on hand, valued at $10 per unit. You manually adjust the unitcost to $12 per unit. The processor adjusts inventory value by $14 (that is, 7 * (Multiplication symbol) $2).
Reviewing Cost Adjustment ResultsAfter running the cost processors, check processing results, including warning and error messages, on the Review CostAccounting Processes page.
Review the accounting entries resulting from the cost adjustments on the Review Cost Distributions page.
Review the updated perpetual average cost or actual cost of items on the Review Item Costs page.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
142
Receipt Cost Adjustment and PropagationYou may need to adjust the cost of a processed receipt for reasons such as invoice price variances, retroactivepurchase order price changes, or prior adjustments. If you're using the actual cost method for transaction costing,you can propagate such adjustments to downstream inventory consumption transactions; and in the case of aninterorganization transfer, you can propagate the receipt cost adjustment to the destination inventory organization.
The following discusses:
• Receipt cost adjustments
• Propagation of receipt cost adjustments
Receipt Cost AdjustmentsEnter receipt cost adjustments on the Create Cost Adjustments page. Because these adjustments could distort the viewof costs and margins downstream in the supply chain, you have the option of tracking them separately by using costelements of type Adjustment.
If you're not tracking cost adjustments separately, you can use cost elements of type Material, Overhead, or Prot inInventory.
Propagation of Receipt Cost AdjustmentsYou can propagate cost adjustments through the supply chain only if you're using the actual cost method fortransaction costing. To do this you must enable propagation in the cost prole setup on the Create Cost Prole page.
When propagation is enabled, the cost processor:
• Propagates receipt cost adjustments to downstream transactions by revaluing the transactions to the extent ofquantity consumed.
• Revalues any remaining inventory.
For interorganization transfers, the cost processor adjusts receipt costs in the destination organization and allorganizations in between, provided that propagation is enabled in all of them. On the other hand, propagation stopsif an inventory organization is associated with a cost prole that doesn't use the actual cost method, or doesn't havepropagation enabled.
The processor always propagates cost adjustments through in-transit inventory organizations, regardless ofpropagation enablement.
If propagation isn't enabled, then the receipt cost adjustment is wrien o as an expense for all inventory that'sconsumed.
Related Topics
• Cost Proles, Default Cost Proles, and Item Cost Proles
Cost Management for Internal Material TransfersCost Management supports receipt accounting and cost accounting for requisition based internal transfers for itemsgoing to either an expense or an inventory destination, with or without a receipt at the destination.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
143
Self-Service Procurement, Supply Chain Financial Orchestration, and Cost Management have been integrated toprovide an estimated transfer price based on the internal cost of the items on the requisition. A transfer price is requiredon the internal material transfer requisition line for approval, budgetary control, and encumbrance accounting.
Cost Management supports requisition-sourced transfer orders going to expense destinations with multipledistributions and dierent expense accounts. Based on the account dened at the distribution level, Cost Managementwill book the expense for the appropriate account. In the case of transfers to expense destinations where a receipt is notrequired, new logical receipt and delivery transactions are created in Cost Management, similar to the physical eventscreated with receipt expense destination transfers when a receipt is required. Budgetary control and encumbranceaccounting are supported for expense destination internal transfer orders.
Budgetary ControlYou can ensure that budget funds are available before a requisition for an internal transfer is submied for approval.Depending on your budgetary control conguration, the funds will be reserved either at the time the requisition issubmied for approval, or when the requisition is approved. Insucient funds override rules and approvers can becongured as part of budgetary control setup. Cost Management liquidates the commitment and books an expenditureat the time of delivery when a receipt is required, or at the time of shipment by creating a virtual receipt when thereceipt is not required. The Requisition for Internal Material Transfer transaction subtype has been added to enablebudgetary control of requisitions for internal material transfers.
Encumbrance AccountingEncumbrance accounting entries are created for transactions subject to budgetary control and encumbranceaccounting when the Create Accounting process is run. Cost Management liquidates the reserve for the encumbranceaccount and creates journal entries for the actual expense value.
Costing Subinventory Material Staged for ProductionThis topic covers the costing of material moved from the warehouse or a common stock subinventory to a shop oorsupply subinventory for work orders that are scheduled for production in the near future. This supply subinventory iscommonly marked as not available-to-promise to prevent the production material from being used for other purposes,while enabling cost accountants to report on the value of the material that's staged for production but not yet issued towork orders.
PrerequisitesThe following tasks must be completed in order to enable the costing of subinventory material staged for production:
• Enable the following Subledger Accounting Journal Entry Rule Set: Work in Process Pick
• Run the following process: Transfer Transactions from Inventory to Costing
Accounting DistributionsThe following accounting distributions are created on the Review Cost Accounting Distributions page for thesubinventory material issue:
Accounting Line Type Transaction Type
Oset
Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
144
Accounting Line Type Transaction Type
Inventory Valuation
Credit
The following accounting distributions are created on the Review Cost Accounting Distributions page for the receipt:
Accounting Line Type Transaction Type
Inventory Valuation
Debit
Oset
Credit
Cost Accounting for Outside ProcessingCost Accounting provides costing and accounting features for manufacturing outside processing, where one or morework order operations are outsourced to a supplier who provides specialized manufacturing services.
Costing of Outside Processing Work OrdersAn outside processing work order is costed and processed as follows.
• The outside processing service is modeled as an Item in cost planning, and is aached to a supplier operation.
• You can dene a standard cost and overheads for the outside processing item.
• The outside processing item cost is included in the nished product's rolled up cost.
Transaction Processing for Outside ProcessingCost Accounting supports the Purchase Order Receipt into Manufacturing transaction type for the costing of outsideprocessing items delivered to Manufacturing. The transaction processing depends on the cost method, as follows.
• Actual or Average cost method. The purchase price multiplied by the number of items received is added to thework in process valuation.
• Standard cost method. The standard cost multiplied by the number of items received is added to the workin process valuation. The dierence between the purchase price and the purchase order is accounted as apurchase price variance.
Accounting Distributions Created for Outside ProcessingYou can review the distributions created for outside processing in the Cost Accounting work area on the Review CostAccounting Distributions page. Cost Accounting creates the following distributions for the delivery of the outsideprocessing service item to Manufacturing.
Accounting Line Type Transaction Type
Work In Process Valuation Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
145
Accounting Line Type Transaction Type
Receiving Inspection
Credit
Related Topics
• How Outside Processing Costs are Planned, Accounted, and Reviewed
• How Items Are Set Up for Outside Processing
Cost Accounting for Manual Procurement of Items for WorkOrdersCost Accounting provides costing and accounting features for items that are directly procured from a work order andare received against that work order and operation.
Costing of Manual Procurement of Items for Work OrdersCost Accounting supports the Direct Delivery to Work Order transaction type for the costing of items delivered toManufacturing.
The transaction processing depends on the cost method:
• Actual or Average cost method - The purchase price multiplied by the number of items received is added to thework in process valuation. This is also applicable for description-based and amount-based items.
• Standard cost method - The standard cost multiplied by the number of items received is added to the workin process valuation. The dierence between the purchase price and the purchase order is accounted as apurchase price variance.
Accounting Distributions for Manual Procurement of Items for Work OrdersYou can review the distributions created for the Direct Delivery to Work Order transactions in the Cost Accounting workarea on the Review Cost Accounting Distributions page.
This table lists the accounting distributions for manufacturing work orders.
Accounting Line Type Transaction Type
Work In Process Valuation
Debit
Receiving Inspection
Credit
This table lists the accounting distributions for maintenance work orders.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
146
Accounting Line Type Transaction Type
Expense
Debit
Receiving Inspection
Credit
Cost Accounting for Rework and Transformation Work OrdersCost Accounting provides costing and accounting functionality for the following manufacturing work order types:
• Rework Work Orders. A work order of type Rework is created for nished products with defects that need tobe repaired and reworked. For example, a product may need to have a defective component removed andreplaced with a new component.
• Transform Work Orders. A work order of type Transform is created when you want to refurbish a product andtransform it into a dierent product, for example, by upgrading one of the product components.
Transactions Types for Rework and Transform Work OrdersThe following transaction types have been added for rework and transform work orders:
• Material Negative Issue. If the quantity is negative and the transaction type is Issue, then a Material NegativeIssue transaction is used.
• Material Negative Return. If the quantity is negative and the transaction type is Return, then a Material NegativeReturn transaction is used.
Related Topics
• Overview of Work Orders
Cost Accounting for Manufacturing Work OrdersCost Accounting provides costing and accounting functionality for these manufacturing work order types:
• Process and discrete manufacturing work orders
• Standard and non-standard work orders
• Orderless manufacturing
After a work order is released in manufacturing execution, it can be interfaced to cost accounting. These transactionsreported for the work orders get interfaced to costing and are processed by costing:
• Component issues and returns
• Resource charging and reversals
• Product completions and returns
• Scrap transactions
• Work order close
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
147
Component Issues and ReturnsThe component transactions are costed based on the cost method of the component.
Cost Method Component Cost
Standard Cost
Uses current standard cost of the component.
Perpetual Average
Uses current perpetual average cost of the component.
Actual Cost
Uses the cost of the specic layer from which the component was issued by the cost processor.
Resource Charging and ReversalsResource transactions are costed based on the resource cost set up in the Manage Resource Costs and published tocost accounting.
Product Completions and ReturnsAll product completions are costed with an estimated cost as provisional completions and their actual cost is calculatedwhen the work order is closed. The estimated cost used for the product completion is based on the cost method and thecorresponding provisional completions option set in the item cost prole of the product.
Cost Method Provisional Completions Options
Standard Cost
Value at standard cost
Perpetual Average
• Value at last actual cost• Value at perpetual average cost• Value at standard cost• Value at work order close
Actual Cost
• Value at last actual cost• Value at standard cost• Value at work order close
Note:• You can create a standard cost for any item, irrespective of the cost method.• If you set value at work order close, product completions are costed with the actual cost incurred for the work
order when the work order close is processed. The product completion transactions won't be processed untilwork order is closed and will remain uncosted.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
148
Scrap TransactionsThe cost of scrap reported against a work order is calculated based on the actual cost incurred till the operation wherethe scrap has been reported. The scrap accounting is based on these parameters that are setup in the item cost prole.
• The operation scrap valuation option is used to decide when the scrap transactions are processed.
◦ Value at work order close: Bunches all the scrap transactions together and processes them at work orderclose.
◦ Value immediately and at work order close: The scrap transaction is processed as soon as the costprocessor encounters it and then corrects the value at work order close, if necessary. This option leads tomore transactions than the previous option.
◦ Value at cost cuto date and at work order close: This option is used for long running batches. The scraptransaction is processed on the cost cuto date, which is usually the month end, and is corrected at workorder close, if necessary.
• The operation scrap accounting option indicates how to account for the scrap transactions.
◦ Include in inventory: The cost of the scrap is included in the inventory value. In essence, the cost of thescrap is spread over the good products produced in the work order. The scrap transaction is ignored bythe cost processor and the distribution processor and is marked accordingly.
◦ Expense: The cost of the scrap is expensed out from the work order.
Work Order CloseWhen the work order is closed, costing ensures that all the transactions reported for the work order are successfullycosted. After successfully processing all transactions, these events are created in costing.
• If the product is costed using actual cost or perpetual average, product cost adjustment transactions arecreated. After the work order is closed, cost processor calculates the actual cost for the product based on all thematerial and resource transactions reported for the work order. If there is a dierence between this actual costand the estimated cost used for the provisional completions, product cost adjustments are created.
• The scrap costs are recalculated and necessary adjustments are created if the costs are dierent from the onesthat were considered earlier.
• If the product is costed using standard cost, then the cost processor compares the components and resourcesused for the work order with the work denition used to roll up the product and creates these variances.
Variance Description
Material Rate Variance
The dierence in cost when the rate used for the component during cost rollup is dierentfrom the rate used while costing the component issue transaction.
Material Substitution Variance
The dierence in cost when an item in the work denition isn't used in the work order orwhen an item that isn't in the work denition is used in the work order.
Material Usage Variance
The dierence in cost when the quantity used in the work order is dierent from the quantityspecied in the work denition.
Resource Rate Variance
The dierence in cost when the rate used for the resource during cost rollup is dierent fromthe rate used while costing the resource charging transaction.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
149
Variance Description
Resource Substitution Variance
The dierence in cost when a resource specied in the work denition isn't used in the workorder or when a resource that isn't in the work denition is used in the work order.
Resource Eciency Variance
The dierence in cost when the actual usage of resource is dierent from the one that'sspecied in the work denition.
Batch Size Variance
The dierence in cost for items and resources that have a usage basis of "xed" and thequantity used in the work order is dierent.
Job Close Variance
This is used to accommodate any variances that the cost processor can't identify as oneof those dened earlier. Also, if the standard cost of the product is manually setup and notthrough the cost rollup process, then the entire cost of components and resources is markedas job close variance.
Note: If a closed work order is reopened and closed again in manufacturing execution, these transactions willbe recreated to identify if any new resource or material transaction is reported since the last time the workorder was reopened.
Review Work Order CostsYou can review work order costs for process manufacturing and discrete manufacturing on the Review Work OrderCosts page. The accounting transactions for work in process balances are displayed, including costs of inputs, outputs,scrap, and standard cost variances.
To review work order costs, perform the following steps.
1. From the Navigator menu, select Cost Accounting.2. From the Tasks panel, select Review Work Order Costs.3. Search for the work order records by Cost Organization. You can also lter by Cost Book, Plant, Output Item,
Work Order Number, and Work Order Status. The elds are described in the following table.
Field Description
WIP Balance
The work in process balance is equal to the sum of input and resource costs, minuscompletions and scrap costs.
Variance Percentage
The dierence between actual and standard cost as a percentage of output cost.
Scrap Percentage
The scrap cost as a percentage of total work order cost. The processing of scrap valuationand scrap accounting is determined by the Cost Prole seings for your organization. Formore information, see the guide Implementing Manufacturing and Supply Chain MaterialsManagement. The scrap costs are calculated using the following formula:
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
150
Field Description
Scrap costs = (The total costs accumulated through this operation) multiplied by the (ScrapQuantity divided by the Batch Quantity)
Amount in Cost Book Currency
The value of input and resources at operation and cost element levels.
Operation Completion Quantity
The total quantity of completions and returns.
Cost Allocation Factor The product costs for process manufacturing transactions are calculated based on the cost
allocation factor dened in the work denition for the primary product, co-products, and by-products. All product completions processed before a work order is closed use an estimatedcost based on the Provisional Completion seing dened for the item's Cost Prole. Once awork order is closed, the cost allocation factor is used to calculate the actual product costs. Thecost allocation factor seings are as follows:
• Fixed. The standard cost of the item is used to cost the provisional completions. Youmust create a standard cost for the output item when you set the cost allocation factorto Fixed.
• Percentage. The following formula is used for products that have the cost allocationfactor set to Percentage:
Percentage = (The total costs accumulated through this operation minus ScrapReported in this operation) multiplied by the Cost Allocation Factor), divided by theQuantity Produced.
You can view the variance details on the Variance Amounts tab. Information is displayed for the following variancetypes:
• Material rate variance
• Yield variance
• Job close variance
• Batch size variance
• Usage variance
• Eciency variance
Yield Variance is used for process manufacturing work orders. The formula for calculating the yield variance is asfollows:
Yield Variance = (The actual reported quantity minus the planned scaled quantity) multiplied by the standard cost of theproduct
Related Topics
• Overview of Work Orders
• How Cost Organizations, Inventory Organizations, and Cost Books Fit Together
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
151
Review Maintenance Work Order CostsReviewing maintenance work orders enable you to track the costs incurred for the materials and resources used formaintenance activities. These activities include preventive maintenance, break down maintenance, and so on, which canbe either in-house or performed outside by a supplier as outsourced jobs.
PrerequisitesThe two prerequisites are:
1. The following table lists the processes to be run. These processes must be run in the same sequence. They canbe either scheduled or manually run.
Process Run By Navigation
Transfer Transactions from Maintenanceto Costing
Manufacturing Supervisor
Tasks panel of MaintenanceManagement > Transfer Transactionsfrom Maintenance to Costing.
Transfer Transactions from Inventory toCosting
Cost Accountant
Scheduled Processes work area >Schedule New Process > TransferTransactions from Inventory to Costing.
Create Cost Accounting Distributions
Cost Accountant
Cost Accounting Work area > Create CostAccounting Distributions.
Create Accounting to create Accountingin SLA
Cost Accountant
Cost Accounting Work area > CreateAccounting.
2. The maintenance work order is in any status other than the unreleased status. That is, the work order is in anyof the following statuses.
◦ Released
◦ On Hold
◦ Canceled
◦ Completed
◦ Closed
Viewing Costs of a Maintenance Work OrderYou can review the material and resource costs incurred for a maintenance work order on the Maintenance Work OrderCosts page. You can review the cost details and their distributions, separately.
• Details: View the summary of cost details, that is, the total cost, material costs, and the resource costs.You can further drill down and view detailed information about the material and resource costs incurred foreach operation and work center in that work order.
• Distributions: View the summary of costs distribution.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
152
Distributions provide accounting information for all the transactions reported against the maintenance workorder that is being analyzed. The summary page shows the processing status of the transactions, that is, NotProcessed, Partially Costed, and so on.
To review maintenance work order costs, do the following:
1. Click Navigator > Cost Accounting.
2. From the Tasks panel, under Cost Processing, select Review Maintenance Work Order Costs.3. Search for the work order records using the search lers: Cost Organization, Cost Book, Plant, Output Item,
Work Order Number, and Work Order Status.4. Select the required work order from the search results and click View Costs.
Note: You can also navigate to this page by clicking View Costs on the Edit Maintenance WorkOrders page.
Reviewing Distributions of a Maintenance Work OrderReview distributions for all transactions reported against a maintenance work order or for a specic transaction. Thetransaction and costing details give you the accounting information of all the resources and materials used for eachitem.
To review distribution of maintenance work order costs, on the Maintenance Work Order Costs page:
1. Select the required work order.2. Click Review Distributions.
Purchase Order Return and Sales Return FlowsThe cost processor uses FIFO logic to cost purchase order (PO) returns. For sales returns that reference an RMA, thecost processor uses the original sales order cost; for sales returns that don't reference an RMA, it uses either the rst orlast receipt layer cost.
The following discusses costing details for purchase order returns and sales order returns.
Purchase Order ReturnsFor PO returns, the cost processor uses the FIFO receipt layer cost to deplete inventory, while it osets receivinginspection at the acquisition PO price. The dierence between the PO price and the FIFO receipt layer cost is booked ascost variance.
This table illustrates several receipts and issues of an item in an inventory organization, followed by a PO return for thesame item:
Reference Transaction Date Transaction Type Quantity Unit Cost Receipt LayerReference
Receipt #1
01-Jan-2011
PO Receipt
100
$120
Not applicable
Receipt #2 02-Jan-2011 PO Receipt 80 $100 Not applicable
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
153
Reference Transaction Date Transaction Type Quantity Unit Cost Receipt LayerReference
Receipt #3
03-Jan-2011
MiscellaneousReceipt
20
$105
Not applicable
Issue #1
04-Jan-2011
MiscellaneousIssue
-40
$120
Receipt #1
Issue #2
05-Jan-2011
MiscellaneousIssue
-60
$120
Receipt #1
Issue #2
05-Jan-2011
MiscellaneousIssue
-15
$100
Receipt #2
Receipt #1
06-Jan-2011
PO Return
-10
$100
Receipt #2
The cost distribution processor creates the following accounting entries for the PO return:
• Dr Receiving Inspection $100*10 / Cr Inventory $100*10
• Dr Receiving Inspection $20*10 / Cr Cost Variance $20*10
Sales ReturnsWhen you dene the cost prole for an item, you can select one of three options for the costing of a sales return:
• Referenced RMA: the cost processor costs the return using the original sales order issue cost.
• Un-referenced RMA: the cost processor costs the return using:
◦ First available receipt layer; or
◦ Last available receipt layer.
This table illustrates several receipts and issues of an item in an inventory organization, followed by a referenced RMAsales return, and an un-referenced RMA sales return for the same item:
Reference Transaction Date Transaction Type Quantity Unit Cost Receipt LayerReference
Receipt #1
01-Jan-2011
PO Receipt
100
$120
Not applicable
Receipt #2
02-Jan-2011
PO Receipt
80
$100
Not applicable
Receipt #3
03-Jan-2011
MiscellaneousReceipt
20
$105
Not applicable
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
154
Reference Transaction Date Transaction Type Quantity Unit Cost Receipt LayerReference
Issue #1
04-Jan-2011
MiscellaneousIssue
-40
$120
Receipt #1
Issue #2
05-Jan-2011
MiscellaneousIssue
-60
$120
Receipt #1
Issue #2
05-Jan-2011
MiscellaneousIssue
-15
$100
Receipt #2
Referenced RMAof Issue #1
06-Jan-2011
RMA Receipt
25
$120
Not applicable
Un-referencedRMA
07-Jan-2011
RMA Receipt
5
$100 or $105
Not applicable
The processor costs the un-referenced RMA return using:
• $100 per unit if you specify the rst available receipt layer; or
• $105 per unit if you specify the last available receipt layer.
Cost Accounting for Drop ShipmentsGlobal drop shipment is an order fulllment strategy where the seller does not keep products in the inventory. Theseller relies on suppliers or contract manufacturers to build, store, and ship orders to the customers. When a customerplaces an order for a drop shipped product, the seller issues a purchase order for the item. The seller also providesinstructions to the suppliers to ship directly to the customer. The supply chain nancial orchestration process routes theorchestration ow of drop shipments through one or more business units within the corporation. These business unitscan belong to the same legal entity or may occur across legal entities.
The nancial ow starts when the supplier sends the advanced shipment notice, or when the supplier matches theinvoice with the purchase order for the drop shipment. The ow creates cost accounting distributions and intercompanyinvoices for the ownership transfers that occur between parties, including supplier, one or more organizations, and thecustomer. Supply Chain Financial Orchestration sends a request to the receiving system to create a drop ship receipton the supplier invoice that references the purchase order. Receiving creates a logical receipt, and then noties OrderManagement to start customer billing. This automation helps to reduce billing cycle time.
Cost Accounting Distributions for Drop ShipmentsYou can review the cost accounting distributions for drop shipments on the Review Cost Accounting Distributions page.The following accounting line types are created for drop shipment events.
Event Application Source Accounting Line Type Transaction Type
Drop Ship Delivery Receiving/ Inventory Drop Ship Inventory Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
155
Event Application Source Accounting Line Type Transaction Type
Drop Ship Delivery
Receiving/ Inventory
Receiving Inspection
Credit
Trade Sale Issue
Supply Chain FinancialOrchestration
DCOGS
Debit
Trade Sale Issue
Supply Chain FinancialOrchestration
Drop Ship Delivery
Credit
Cost Management for Inclusive TaxesTo comply with country-specic regulatory requirements, you can capture item prices and all calculated exclusiveand inclusive taxes in your purchases, with receipt costs adjusted to account for amounts of inclusive taxes that wereincorporated in the item purchase price. The amounts of inclusive taxes are booked to a tax liability or recovery account.
Procurement ows for both delivery and non-delivery inclusive taxes are supported, as follows.
• Tax Point Basis Set to Receipt. In the case of delivery based taxes, where the Tax Point Basis is set to Receipt,the tax call is made during the receipt transaction, and inclusive taxes are calculated. Based on the recoverablepercentage dened, inclusive tax can have recoverable and nonrecoverable amounts. On the purchase orderline, the total amount calculation incorporates the receipt quantity. During invoicing, the receipt values arecopied to the invoice, therefore cost variance is not applicable.
• Tax Point Basis Set to Invoice. In the case of non-delivery based taxes, where the Tax Point Basis is set toInvoice, recoverable and nonrecoverable inclusive taxes on the purchase order are copied during the receipttransaction. Any dierence between the amounts on the receipt and the invoice are considered as variances,and are applied to the item cost.
Cost Management supports the following cost adjustments and accounting events for inclusive taxes:
Cost Adjustments and AccountingEvents
Description
Adjust Receipt and Inventory Cost forInclusive Taxes on Purchase Orders.
Segregate and account for recoverable and nonrecoverable inclusive tax. When the item priceon a purchase order line includes taxes, Receipt Accounting separates the item price into basicitem price, inclusive recoverable tax, and inclusive nonrecoverable tax. This lets you accountfor nonrecoverable tax in the item cost when the price on the purchase order line containsinclusive tax.
Adjust Receipt and InventoryCost for Inclusive Taxes on GlobalProcurement Purchase Orders.
Segregate and account for recoverable and nonrecoverable inclusive tax. When the item priceon a global procurement purchase order line includes taxes, Receipt Accounting separates theitem price into basic item price, inclusive recoverable tax, and inclusive nonrecoverable tax.Inclusive tax adjustments are now performed on logical transactions in the supplier-facinginventory organization when you physically receive the items in an inventory organization thatis associated with a dierent business unit.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
156
Cost Adjustments and AccountingEvents
Description
Adjust Receipt and Inventory Costfor Inclusive Taxes on ConsignmentPurchase Orders
Segregate and account for recoverable and nonrecoverable inclusive tax. When the item priceon a consignment purchase order line includes taxes, Receipt Accounting separates the itemprice into basic item price, inclusive recoverable tax, and inclusive nonrecoverable tax. This letsyou account for nonrecoverable tax in the consigned item cost when the price on a purchaseorder line contains inclusive tax.
Global Procurement
Overview of Global Procurement Trade AccountingCompanies often design their legal structure for nancial eciency as well as eciency in the physical ow of goodsthrough the supply chain. Typically, the most optimal nancial movement of goods is dierent from the most optimalphysical movement of goods. For example, the purchase requisitions from a group of subsidiary companies could berouted through a single international purchasing company who deals with the suppliers. As a result, the legal ownersof the purchasing organizations will be dierent from the legal owners of the receiving organizations. This form ofpurchasing is known as global procurement.The following discusses:
• Global procurement trade ows
• Trade agreements and accounting rule sets
• Agreements converted to purchase orders
• Commonly used terms
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
157
Global Procurement Trade FlowsThis gure illustrates a typical global procurement trade ow, in this case between a US corporation and its Chinasupplier. The US corporation has a central procurement business unit which creates trade agreements and purchaseorders on behalf of its subsidiaries.
China Supplier US Corporation
Procurement Business Unit
US IncReceiving Legal
EntityChina Ltd
Sold-to Legal Entity(Purchasing Affiliate)
US EastReceiving Profit
Center Business Unit
OwnershipChangeEvent
PhysicalFlow
CN BUChina Sold-to Profit
Center Business Unit
M1US Receiving
Inventory Organization
M2US Receiving
Inventory Organization
OwnershipChangeEvent
US West Receiving Profit
Center Business Unit
ManagementFlow
CN INV ORGChina Purchasing
Trade Organization
The China supplier drop ships the goods directly to the US receiving inventory organization M1. However for legal andaccounting purposes, the trade ows from the China supplier through the China sold-to legal entity (China Ltd), to theUS receiving legal entity (US Inc). For management and prot tracking purposes, the trade ows from the China sold-toprot center business unit CN BU to the US receiving prot center business unit US West.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
158
Financial Trade Agreements and Accounting Rule SetsA trade agreement denes the parties in the trade relationship. In this example the trade agreement is between the UScorporation and the China supplier, and it denes the buying, selling, sold-to, and receiving legal entities, prot centerbusiness units, inventory organizations, and trade organizations.
The accounting rule sets dene source documents and accounting that is required in the legal and nancial ow, alsoknown as the ownership change event ow. A rule set is associated with a nancial route, and nancial routes can havedierent accounting rule sets.
The following illustrates a trade agreement setup for the US corporation:
• Agreement #: GP001
• Type: Procurement
• Supplier Ownership Change: ASN (Advance Shipment Notice)
• Primary Trade Relationship #: PTR1
• Sold-to Legal Entity: China Ltd.
• Sold-to Business Unit: CN BU
• Deliver-to Legal Entity: US Inc.
• Deliver-to Business Unit: US West
• Financial Trade Relationship #: FTR1
• From Legal Entity: China Ltd.
• From Business Unit: CN BU
• From Organization: CN INV ORG
• To Legal Entity: US Inc.
• To Business Unit: US West
• To Organization: M1
• Prot Tracking: Yes
• Invoicing: Yes
• Obligation Currency: CNY
• Rate Type: Corporate
• Transfer Pricing: Purchase Order - 10%
• Purchase Order/Sales Order: No
Trade Agreement Converted to Purchase OrdersThe trade agreement is used to create purchase orders. The following illustrates a purchase order created under the USCorporation trade agreement # GP001:
• Document Type: Purchase Order
• Document #: PO-GP001
• Document Line #: 1
• Document Line Detail: 1.1
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
159
• Document Line Distribution #: 1.1.1
• Item: SFO-CST_ASSET
• Quantity: 100
• UOM: Each
• Currency: CNY
• Price: 650
• Sold-to Legal Entity: China Ltd.
• Trade Organization: CN INV ORG
• Deliver-to Organization: M1
• Primary Trade Relationship #: PTR1
Global Procurement Common TermsThe following table describes the terms commonly used in global procurement trading:
Terms Denitions and Rules
buy-sell relationship
Relationship between two business units where one acts as a buyer and the other as a sellerof goods or services. The seller records the revenue, cost of sale, and receivables. The buyerrecords the payables and inventory or expense. A buy-sell trade between internal businessunits is seled through the transfer price.
asset item
Inventory item where the cost of acquisition is valued as an asset on the balance sheet. Theinventory cost is expensed when it is consumed or sold.
expense item
Inventory item whose cost of acquisition is booked as an expense.
transfer price
The unit price that one business unit charges another for goods or services traded within theenterprise. The transfer price is typically based on the price list, cost plus or minus, or purchaseprice plus or minus.
nancial route
Designates how nancial transactions are seled, can be dierent from the physical route, andmay involve one or more intermediary nodes. The intermediary nodes are internal businessunits that are not part of the physical supply chain transaction but are part of the nancialroute.
Incoterms
A series of sales terms in international trade, used to dene the rights and obligations ofthe trade partners with respect to the delivery of goods sold. Incoterms are used to dividetransaction costs and responsibilities between buyer and seller, and to reect transportationpractices.
intercompany prot and loss
The internal prot or loss arising out of trade among business units in the enterprise. Theseinternal prots and losses are used for internal management but are typically eliminated whenproducing the enterprise consolidated nancial statements for external stakeholders.
intercompany trade
The trade of goods and services between organizations belonging to dierent legal entitieswithin a conglomerate.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
160
Terms Denitions and Rules
intracompany trade
The trade of goods or services between two internal organizations within a legal entity.
ownership change event
The transfer of title of goods and services from one party to another. This results in accountingand the creation of nancial documents such as Accounts Receivable and Accounts Payableinvoices.
price list
Contains the basic list information and pricing aributes for items or product groups.
pricing option
A method to compute the transfer price based on cost, source document price, or price list.
prot center
A business unit that operates with its own income statement and reports to the legal entity.
purchasing trade organization
The inventory organization reporting to the sold-to legal entity identied in the purchaseorder. This organization is used for cost accounting the transactions in the sold-to legal entity.
qualiers
Business aributes of a supply chain document or transaction that determine the applicabilityof the trade agreement.
supply chain nancial orchestrationagreement
An agreement between the legal entities, business units, and trade organizations of acorporate group. The agreement denes the parties in the trade relationship and the nancialselement process.
trade distributions
Subledger entries created by Oracle Fusion Receipt Accounting and Oracle Fusion CostAccounting for Oracle Fusion Supply Chain Financial Orchestration trade transactions.
procurement business unit
Has central responsibility for the creation of trade agreements and purchase orders on behalfof legal entities and business units under the holding company.
Related Topics• Example of Accounting of Global Procurement Trade Transactions into Inventory• Example of Accounting of Global Procurement Trade Transactions into Expense• Prot Center Business Units and Bill-to Business Units
Prot Center Business Units and Bill-to Business UnitsOracle Fusion Receipt Accounting and Oracle Fusion Cost Accounting create accounting distributions for tradetransactions in the supply chain. These accounting distributions are associated with two kinds of business units: protcenter business units and bill-to business units.
The following explains the dierent business units associated with trade transactions and the assumptions used toderive them.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
161
Prot Center Business UnitA prot center business unit reports to a single legal entity and is responsible for measuring the protability ofinventory organizations under that legal entity. All trade transactions are associated with a prot center business unitwhich, in turn, is derived from the inventory organization that owns the trade transaction. Cost Accounting uses theprot center business unit to process all inventory transactions.
Bill-to Business UnitA bill-to business unit is used to process receipt accruals in a trade transaction, and is the same business unit thatprocesses the invoice in Accounts Payable. For supplier accruals, the bill-to business unit is derived from the purchaseorder. For intercompany accruals, the bill-to business unit is derived from the prot center business unit.
Related Topics• How Cost Organizations, Inventory Organizations, and Cost Books Fit Together
Example of Accounting of Global Procurement Trade Transactionsinto InventoryMost large enterprises use a global procurement approach to their purchasing needs, wherein a central buyingorganization buys goods from suppliers on behalf of the internal organizations. Oracle Fusion Receipt Accounting andOracle Fusion Cost Accounting process transactions for these global procurement trade events and generate subledgerjournal entries.
The following is an example of accounting performed by Cost Accounting and Receipt Accounting for a globalprocurement ow into inventory. It illustrates:
• Transactions that are captured in Oracle Fusion Supply Chain Financial Orchestration and interfaced to ReceiptAccounting and Cost Accounting.
• Accounting entries that Receipt Accounting and Cost Accounting generate for the forward ow of a shipmentfrom the supplier, through the intermediary distributor, to the nal receiving organization.
• Accounting entries that Receipt Accounting and Cost Accounting generate for the return ow from thereceiving organization to the supplier.
ScenarioChina Supplier ships the goods to US Inc. through the intermediary distributor, China Ltd.
Transactions from Oracle Fusion Supply Chain Financial OrchestrationThe global procurement trade agreement, accounting rule sets, and associated purchase orders are set up in SupplyChain Financial Orchestration, and the transactions ow into Receipt Accounting and Cost Accounting based on thissetup:
• Purchase Order (PO) price from China Supplier to China Ltd. is USD 50.
• Intercompany transfer price from China Ltd. to US Inc. is USD 100.
• Intercompany invoicing is set to Yes.
• Prot tracking is set to Yes.
• Overhead rule is congured in Cost Accounting for transaction type Trade in-Transit Receipt in CostOrganization CO1.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
162
• China Ltd books a prot of USD 40 (USD 100 transfer price - USD 50 PO price - USD 10 overhead).
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the forward and return shipment of goods.
Accounting Entries
The following gure illustrates accounting entries for the forward ow from legal entity China Ltd. to legal entity US Inc.
China Supplier
Trade Receipt Accrual Dr Trade Clearing $50 Cr Accrual $50
Trade In-Transit Receipt Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Cr Trade Clearing $50 Cr OVH Absorption $10
Trade In-Transit Issue Dr IC COGS MAT $50 Dr IC COGS OVH $10 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10
IC AR Invoice Dr IC Receivable $100 Cr IC Revenue $100
Supplier Invoice Dr Accrual $50 Cr Liability $50
Trade Receipt Accrual Dr Trade Clearing $100 Cr IC Accrual $100
Trade In-Transit ReceiptDr Trade In-Transit MAT $50Dr Trade In-Transit OVH $10Dr Trade In-Transit GP $40Cr Trade Clearing $100
IC AP Invoice Dr IC Accrual $100 Cr IC Liability $100
PO Receipt Dr Receiving Inspection $100 Cr Trade In-Transit $100
Legend LE = Legal Entity BU = Business Unit MAT = Material OVH = Overhead IC = Intercompany COGS = Cost of Goods Sold AR = Accounts Receivable AP = Accounts payable GP = Gross Profit Cst Org = Cost Organization Inv Org = Inventory Organization
China Ltd (Sold-to LE)CN (Sold-to Profit Ctr BU)
CO1 (Sold-to Cst Org)M1 (Sold-to Inv Org)
US Inc (Receiving LE)US West (Receiving Profit
Ctr BU)CO2 (Receiving Cst Org)M2 (Receiving Inv Org)
PO DeliveryDr Inventory Valuation MAT$50Dr Inventory Valuation OVH$10Dr Inventory Valuation GP $40Cr Receiving Inspection $100
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
163
Receipt Accounting generates distributions under business unit CN and inventory organization M1. Cost Accountinggenerates distributions under cost organization CO1 and inventory organization M1.
The following table describes those distributions.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
50
USD
Not Applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Accrual
-50
USD
Not Applicable
PO Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
50
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-50
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Expense
10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit Receipt
OverheadAbsorption
-10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit Issue
IntercompanyCOGS
50
USD
Material
PO Price
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-50
USD
Material
PO Price
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyReceivable
100
USD
Not Applicable
Transfer Price
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyRevenue
-100
USD
Not Applicable
Transfer Price
ReceiptAccounting
SupplierInvoice
Accrual
50
USD
Not Applicable
PO Price
ReceiptAccounting
SupplierInvoice
Liability
-50
USD
Not Applicable
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
164
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
Receipt Accounting generates distributions under business unit US West and inventory organization M2. CostAccounting generates distributions under cost organization CO2 and inventory organization M2.
The following table describes those distributions.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Trade ReceiptAccrual
IntercompanyAccrual
-100
USD
Not Applicable
Transfer Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
50
USD
Material
SendingOrganizationCost
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
40
USD
Prot inInventory
InternalMarkup
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-100
USD
Material
Transfer Price
AccountsPayable
IntercompanyAccountsPayable Invoice
IntercompanyAccrual
100
USD
Not Applicable
Transfer Price
AccountsPayable
IntercompanyAccountsPayable Invoice
IntercompanyLiability
-100
USD
Not Applicable
Transfer Price
ReceiptAccounting
PO Receipt
ReceivingInspection
100
USD
Not Applicable
Transfer Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
165
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
PO Receipt
Trade In-Transit
-100
USD
Not Applicable
Transfer Price
CostAccounting
PO Delivery
InventoryValuation
50
USD
Material
SendingOrganizationCost
CostAccounting
PO Delivery
InventoryValuation
10
USD
Overhead
SendingOrganizationCost
CostAccounting
PO Delivery
InventoryValuation
40
USD
Prot inInventory
InternalMarkup
CostAccounting
PO Delivery
ReceivingInspection
-100
USD
Not Applicable
Transfer Price
US Inc returns goods directly to China Supplier.
The following gure illustrates accounting entries for the return ow from legal entity US Inc to legal entity China Ltd.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
166
China Supplier
Trade Return Accrual Dr Accrual $50 Cr Trade Clearing $50
Trade In-Transit Return Dr Trade Clearing $50 Dr Cost Variance $10 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10
Trade In-Transit Ret Rec Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Cr IC COGS MAT $50 Cr IC COGS OVH $10
IC AR Invoice Dr IC Revenue $100 Cr IC Receivable $100
Supplier Invoice Dr Liability $50 Cr Accrual $50
Trade Return Accrual Dr IC Accrual $100 Cr Trade Clearing $100
Trade In-Transit ReturnDr Trade Clearing $100Cr Trade In-Transit MAT $50Cr Trade In-Transit OVH $10Cr Trade In-Transit GP $40
IC AP Invoice Dr IC Liability $100 Cr IC Accrual $100
Return to Vendor Dr Trade In-Transit $100 Cr Receiving Inspection $100
Legend LE = Legal Entity BU = Business Unit MAT = Material OVH = Overhead IC = Intercompany COGS = Cost of Goods Sold AR = Accounts Receivable AP = Accounts payable GP = Gross Profit Cst Org = Cost Organization Inv Org = Inventory Organization Ret Rec = Return Receipt
China Ltd (Sold-to LE)CN (Sold-to Profit Ctr BU)
CO1 (Sold-to Cst Org)M1 (Sold-to Inv Org)
US Inc (Receiving LE)US West (Receiving Profit
Ctr BU)CO2 (Receiving Cst Org)M2 (Receiving Inv Org)
Return to ReceivingDr Receiving Inspection $100Cr Inventory Valuation MAT$50Cr Inventory Valuation OVH$10Cr Inventory Valuation GP $40
Receipt Accounting generates distributions under business unit US West and inventory organization M2. CostAccounting generates distributions under cost organization CO2 and inventory organization M2.
The following table describes those distributions.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
167
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReturnAccrual
IntercompanyAccrual
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Trade ReturnAccrual
Trade Clearing
-100
USD
Not Applicable
Transfer Price
CostAccounting
Trade In-Transit Return
Trade Clearing
100
USD
Material
Transfer Price
CostAccounting
Trade In-Transit Return
Trade In-Transit
-50
USD
Material
SendingOrganizationCost
CostAccounting
Trade In-Transit Return
Trade In-Transit
-10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade In-Transit Return
Trade In-Transit
-40
USD
Prot inInventory
InternalMarkup
CostAccounting
Return toReceiving
ReceivingInspection
100
USD
Material,Overhead,and Prot inInventory
Transfer Price
CostAccounting
Return toReceiving
InventoryValuation
-50
USD
Material
SendingOrganizationCost
CostAccounting
Return toReceiving
InventoryValuation
-10
USD
Overhead
SendingOrganizationCost
CostAccounting
Return toReceiving
InventoryValuation
-40
USD
Prot inInventory
InternalMarkup
ReceiptAccounting
Return toSupplier
Trade In-Transit
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Return toSupplier
ReceivingInspection
-100
USD
Not Applicable
Transfer Price
ReceiptAccounting
IntercompanyAP Invoice
IntercompanyLiability
100
USD
Not Applicable
Transfer Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
168
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
IntercompanyAP Invoice
IntercompanyAccrual
-100
USD
Not Applicable
Transfer Price
Receipt Accounting generates distributions under business unit CN and inventory organization M1. Cost Accountinggenerates distributions under cost organization CO1 and inventory organization M1.
The following table describes those distributions.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReturnAccrual
Accrual
50
USD
Not Applicable
PO Price
ReceiptAccounting
Trade ReturnAccrual
Trade Clearing
-50
USD
Not Applicable
PO Price
CostAccounting
Trade In-Transit Return
Trade Clearing
50
USD
Material
PO Price
CostAccounting
Trade In-Transit Return
Cost Variance*
10
USD
Not Applicable
Inventory isdepleted atthe currentcost, and thedierencebetweentransfer priceand cost isbooked as costvariance
CostAccounting
Trade In-Transit Return
Trade In-Transit
-50
USD
Material
PO Price
CostAccounting
Trade In-Transit Return
Trade In-Transit
-10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit ReturnReceipt
Trade In-Transit
50
USD
Material
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
169
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Trade In-Transit ReturnReceipt
Trade In-Transit
10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit ReturnReceipt
IntercompanyCOGS
-50
USD
Material
PO Price
CostAccounting
Trade In-Transit ReturnReceipt
IntercompanyCOGS
-10
USD
Overhead
Overhead Rate
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyRevenue
100
USD
Not Applicable
Transfer Price
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyReceivable
-100
USD
Not Applicable
Transfer Price
ReceiptAccounting
SupplierInvoice
Liability
50
USD
Not Applicable
PO Price
ReceiptAccounting
SupplierInvoice
Accrual
-50
USD
Not Applicable
PO Price
*Inventory is depleted at the current cost, and the dierence between transfer price and cost is booked as cost variance.
Related Topics
• Overview of Global Procurement Trade Accounting
• Example of Accounting of Global Procurement Trade Transactions into Expense
• Review Item Cost and Global Procurement Trade Transaction Accounting
Example of Accounting of Global Procurement Trade Transactionsinto ExpenseOracle Fusion Receipt Accounting and Oracle Fusion Cost Accounting process transactions and create distributions forglobal procurement purchases that are received into expense destinations rather than inventory, and for services thatare expensed.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
170
The following is an example of accounting performed by Cost Accounting and Receipt Accounting for a globalprocurement ow into expense. It illustrates:
• Transactions that are captured in Oracle Fusion Supply Chain Financial Orchestration and interfaced to ReceiptAccounting and Cost Accounting.
• Accounting entries that Receipt Accounting and Cost Accounting generate for the forward ow of goods orservices from the supplier, through the intermediary distributor, to the nal receiving organization.
• Accounting entries that Receipt Accounting and Cost Accounting generate for the return ow from thereceiving organization to the supplier.
ScenarioChina Supplier ships the goods to US Inc. and the goods ow through an intermediary distributor, China Ltd.
Transactions from Oracle Fusion Supply Chain Financial OrchestrationThe global procurement trade agreement, accounting rule sets, and associated purchase orders are set up in SupplyChain Financial Orchestration, and the transactions ow into Receipt Accounting and Cost Accounting based on thissetup:
• Purchase Order (PO) price from China Supplier to China Ltd is USD 50.
• Intercompany transfer price from China Ltd to US Inc is USD 100.
• Intercompany invoicing is set to Yes.
• Prot tracking is set to Yes.
• Overhead rule is congured in Cost Accounting for transaction type Trade in-Transit Receipt in costorganization CO1.
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the forward and return shipment of goods.
Accounting Entries
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
171
The following gure illustrates the accounting entries for the forward ow from China Ltd (sold-to legal entity) to US Inc(receiving legal entity).
China Supplier
Trade Receipt Accrual Dr Trade Clearing $50 Cr Accrual $50
Trade In-Transit Receipt Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Cr Trade Clearing $50 Cr OVH Absorption $10
Trade In-Transit Issue Dr IC COGS MAT $50 Dr IC COGS OVH $10 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10
IC AR Invoice Dr IC Receivable $100 Cr IC Revenue $100
Supplier Invoice Dr Accrual $50 Cr Liability $50
Trade Receipt Accrual Dr Trade Clearing $100 Cr IC Accrual $100
Trade In-Transit ReceiptDr Trade In-Transit $100Cr Trade Clearing $100
IC AP Invoice Dr IC Accrual $100 Cr IC Liability $100
PO Receipt Dr Receiving Inspection $100 Cr Trade In-Transit $100
Legend LE = Legal Entity BU = Business Unit MAT = Material OVH = Overhead IC = Intercompany COGS = Cost of Goods Sold AR = Accounts Receivable AP = Accounts payable GP = Gross Profit Cst Org = Cost Organization Inv Org = Inventory Organization
China Ltd (Sold-to LE)CN (Sold-to Profit Ctr BU)
CO1 (Sold-to Cst Org)M1 (Sold-to Inv Org)
US Inc (Receiving LE)US West (Receiving Profit
Ctr BU)CO2 (Receiving Cst Org)M2 (Receiving Inv Org)
PO Delivery Dr Expense $100 Cr Receiving Inspection $100
Receipt Accounting generates distributions under business unit CN and inventory organization M1. Cost Accountinggenerates distributions under cost organization CO1 and inventory organization M1.
The following table describes those receipt and cost accounting entries.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
172
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
50
USD
Not Applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Accrual
-50
USD
Not Applicable
PO Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
50
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-50
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit Receipt
OverheadAbsorption
-10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit Issue
IntercompanyCOGS
50
USD
Material
PO Price
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-50
USD
Material
PO Price
CostAccounting
Trade In-Transit Issue
IntercompanyCOGS
10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-10
USD
Overhead
Overhead Rate
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyReceivable
100
USD
Not Applicable
Transfer Price
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyRevenue
-100
USD
Not Applicable
Transfer Price
ReceiptAccounting
SupplierInvoice
Accrual
50
USD
Not Applicable
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
173
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
SupplierInvoice
Liability
-50
USD
Not Applicable
PO Price
Receipt Accounting generates distributions under business unit US West and inventory organization M2. CostAccounting generates distributions under cost organization CO2 and inventory organization M2.
The following table describes those receipt and cost accounting entries.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Trade ReceiptAccrual
IntercompanyAccrual
-100
USD
Not Applicable
Transfer Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
100
USD
Material
Transfer Price
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-100
USD
Material
Transfer Price
AccountsPayable
IntercompanyAccountsPayable Invoice
IntercompanyAccrual
100
USD
Not Applicable
Transfer Price
AccountsPayable
IntercompanyAccountsPayable Invoice
IntercompanyLiability
-100
USD
Not Applicable
Transfer Price
ReceiptAccounting
PO Receipt
ReceivingInspection
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
PO Receipt
Trade In-Transit
-100
USD
Not Applicable
Transfer Price
ReceiptAccounting
PO Delivery
Expense
100
USD
Not Applicable
Transfer Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
174
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
PO Delivery
ReceivingInspection
-100
USD
Not Applicable
Transfer Price
US Inc. returns goods directly to China Supplier.
The following gure illustrates the accounting entries for the return ow from legal entity US Inc. to legal entity ChinaLtd .
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
175
China Supplier
Trade Return Accrual Dr Accrual $50 Cr Trade Clearing $50
Trade In-Transit Return Dr Trade Clearing $50 Dr Cost Variance $10 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10
Trade In-Transit Ret Rec Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Cr IC COGS MAT $50 Cr IC COGS OVH $10
IC AR Invoice Dr IC Revenue $100 Cr IC Receivable $100
Supplier Invoice Dr Liability $50 Cr Accrual $50
Trade Return Accrual Dr IC Accrual $100 Cr Trade Clearing $100
Trade In-Transit ReturnDr Trade Clearing $100Cr Trade In-Transit $100
IC AP Invoice Dr IC Liability $100 Cr IC Accrual $100
Return to Vendor Dr Trade In-Transit $100 Cr Receiving Inspection $100
Legend LE = Legal Entity BU = Business Unit MAT = Material OVH = Overhead IC = Intercompany COGS = Cost of Goods Sold AR = Accounts Receivable AP = Accounts payable GP = Gross Profit Cst Org = Cost Organization Inv Org = Inventory Organization Ret Rec = Return Receipt
China Ltd (Sold-to LE)CN (Sold-to Profit Ctr BU)
CO1 (Sold-to Cst Org)M1 (Sold-to Inv Org)
US Inc (Receiving LE)US West (Receiving Profit
Ctr BU)CO2 (Receiving Cst Org)M2 (Receiving Inv Org)
Return to ReceivingDr Receiving Inspection $100Cr Expense $100
Receipt Accounting generates distributions under business unit US West and inventory organization M2. CostAccounting generates distributions under cost organization CO2 and inventory organization M2.
The following table describes those receipt and cost accounting entries.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
176
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReturnAccrual
IntercompanyAccrual
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Trade ReturnAccrual
Trade Clearing
-100
USD
Not Applicable
Transfer Price
CostAccounting
Trade In-Transit Return
Trade Clearing
100
USD
Material
Transfer Price
CostAccounting
Trade In-Transit Return
Trade In-Transit
-100
USD
Material
Transfer Price
ReceiptAccounting
Return toReceiving
ReceivingInspection
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Return toReceiving
Expense
-100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Return toSupplier
Trade In-Transit
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Return toSupplier
ReceivingInspection
-100
USD
Not Applicable
Transfer Price
AccountsPayable
IntercompanyAccountsPayable Invoice
IntercompanyLiability
100
USD
Not Applicable
Transfer Price
AccountsPayable
IntercompanyAccountsPayable Invoice
IntercompanyAccrual
-100
USD
Not Applicable
Transfer Price
Receipt Accounting generates distributions under business unit CN and inventory organization M1. Cost Accountinggenerates distributions under cost organization CO1 and inventory organization M1.
The following table describes those receipt and cost accounting entries.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
177
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReturnAccrual
IntercompanyAccrual
50
USD
Not Applicable
PO Price
ReceiptAccounting
Trade ReturnAccrual
Trade Clearing
-50
USD
Not Applicable
PO Price
CostAccounting
Trade In-Transit Return
Trade Clearing
50
USD
Material
PO Price
CostAccounting
Trade In-Transit Return
Cost Variance*
10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit Return
Trade In-Transit
-50
USD
Material
PO Price
CostAccounting
Trade In-Transit Return
Trade Clearing
-10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit ReturnReceipt
Trade In-Transit
50
USD
Material
PO Price
CostAccounting
Trade In-Transit ReturnReceipt
Trade In-Transit
10
USD
Overhead
Overhead Rate
CostAccounting
Trade In-Transit ReturnReceipt
IntercompanyCost of GoodsSold
-50
USD
Material
PO Price
CostAccounting
Trade In-Transit ReturnReceipt
IntercompanyCost of GoodsSold
-10
USD
Overhead
Overhead Rate
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyRevenue
100
USD
Not Applicable
Transfer Price
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyReceivables
-100
USD
Not Applicable
Transfer Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
178
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
SupplierInvoice
Liability
50
USD
Not Applicable
PO Price
ReceiptAccounting
SupplierInvoice
Accrual
-50
USD
Not Applicable
PO Price
*Inventory is depleted at the current cost, and the dierence between transfer price and cost is booked as cost variance.
Related Topics• Example of Accounting of Global Procurement Trade Transactions into Inventory• Overview of Global Procurement Trade Accounting• Review Item Cost and Global Procurement Trade Transaction Accounting
Review Item Cost and Global Procurement Trade TransactionAccountingReceipt Accounting and Cost Accounting process and create accounting distributions for trade transactions in thesupply chain.
The following explains how to review the results of global procurement trade transactions processed by ReceiptAccounting and Cost Accounting.
Receipt Accounting ResultsIn the Receipt Accounting work area, access the Review Receipt Accounting Distributions page. On this page you canview accounting details by Source Document Number and Source Document Line Number. Source documents arepurchase order schedules, transfer orders, and sales orders.
Cost Accounting ResultsIn the Cost Accounting work area:
• Access the Review Item Costs page. On this page you can view a breakdown of the cost of items, costcomparisons of items across organizations, and cost trends over time.
• Access the Review Cost Accounting Distributions page. On this page you can view accounting details of tradetransactions by Reference Document Number.
Related Topics• Receipt Accounting Tasks and Accounting Events
Cost Accounting Examples
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
179
Example of Using the Actual Cost MethodThis example illustrates how the cost processor uses the actual cost method to cost: inventory receipts, cost of goodssold, and the value of beginning and ending inventory.
ScenarioA restaurant business receives two shipments of raw material for a total of 25 units, and a sales order of 12 units. Theunit is dened as a sandwich, and the raw material is dened as sandwich food ingredients.
Transaction DetailsThe business needs to calculate:
• Overhead absorption on the two receipts.
• The value of beginning and ending inventory, including raw materials and overhead absorption.
• Cost of good sold.
AnalysisFollowing are the details for two receipts of raw materials:
Receipt ID Inventory Value
Receipt #1
10 * $10 = $100
Receipt #2
15 * $12 = $180
The cost processor calculates overhead absorption for the two receipts as follows:
Receipt ID Overhead Absorption
Receipt #1
Labor: $5 Facility: $3
Receipt #2
Labor: $8 Facility: $7
Resulting Accounting DistributionsThe distribution processor generates the following accounting entries:
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
180
Event Accounting Entry
Receipt #1: 10 units raw material
Dr Inventory-Raw Material $100 Cr Receiving $100
Receipt #1: overhead
Dr Inventory-Labor $5 Dr Inventory-Facility $3 Cr Overhead Absorption $8
Receipt #2: 15 units raw material
Dr Inventory-Raw Material $180 Cr Receiving $180
Receipt #2: overhead
Dr Inventory-Labor $8 Dr Inventory-Facility $7 Dr Overhead Absorption $15
COGS for 12 units (10 * $108/10) + (2 *$195/15)
Dr COGS $134 Cr Inventory $134
The beginning inventory is 25 units valued at: 10 * $10.8 + 15 * $13 = $303.
The ending inventory is 13 units valued at: 13 * $13 = $169.
Examples of Making Cost AdjustmentsAdjust the cost of an item to reect uctuating market costs, or to reect other changes, such as increased overheadcosts.
The following are examples of cost adjustments.
Adjustment at Item Cost LevelAssume the average cost of an item increases from $5 to $6, and the quantity on hand is 100 each. The distributionprocessor creates the following accounting entry to adjust the item cost.
Accounting Line Type Debit Credit
Inventory Valuation
$100
Not applicable
Oset
Not applicable
$100
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
181
Adjustment at Cost Element LevelAssume that an item has the following cost structure.
Cost Element Amount
Material
$4.00
Freight
$1.00
Tax
$0.50
Utilities
$0.50
If the quantity on hand is 100 each, and you want to increase utilities cost from $0.50 to $1.00, the distributionprocessor creates the following accounting entry to adjust the item cost.
Accounting Line Type Debit Credit
Inventory Valuation - Utilities
$50
Not applicable
Oset
Not applicable
$50
Layer Inventory Cost AdjustmentAssume that you adjust the cost of an item from $9 to $11, and the remaining receipt layer quantity is 60 units. Thedistribution processor creates the following accounting entry to update inventory valuation.
Accounting Line Type Debit Credit
Inventory Valuation
$120
Not applicable
Oset
Not applicable
$120
Example of Receipt Cost AdjustmentThis example illustrates the accounting entries resulting from a receipt cost adjustment for an invoice price variance,the revaluation of inventory, and propagation of the cost adjustment to interorganization transfers and sales issues.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
182
ScenarioOrganization A has a purchase order receipt, for which it subsequently processes an invoice price variance adjustment.Organization A lls a sales order, and transfers some of its inventory to Organization B, who lls another sales order.
Transaction DetailsOrganization A has a PO receipt of 100 units at $100 per unit, of which it sells 30 units, and transfers 20 units toOrganization B at a transfer price of $125. Organization B in turn sells 6 units. The IPV for the initial PO receipt is $20 perunit.
AnalysisRun the cost processor to cost the initial PO receipt, the interorganization transfer, and the sales issues fromOrganization A and Organization B. After entering the receipt cost adjustment for the IPV of $20 per unit, rerun the costprocessor to update the value of remaining inventory, and to propagate the IPV adjustment to the interorganizationtransfer, and the sales issues from Organization A and Organization B.
Resulting Accounting EntriesThe cost distribution processor creates accounting entries for the PO receipt, interorganization transfer to OrganizationB, and sales issues from Organization A and Organization B. The following table describes those accounting entries:
Event Accounting Entries
Organization A PO receipt: 100 unitsat $100
Dr Inventory (Material) $100*100 Cr Receiving Inspection $100*100
Sales issue from Organization A: 30units at $100 per unit
Dr DCOGS $100*30 Cr Inventory $100*30
100 percent COGS recognition forsales issue
Dr COGS $100*30 Cr DCOGS $100*30
Transfer from Organization A toOrganization B: 20 units at $125 perunit
Dr Interorganization Receivable $125*20 Cr Inventory (Material) $100*20 Cr Interorganization (Gain/Loss) $25*20
Interorganization receipt byOrganization B from Organization A:20 units at $125
Dr Inventory (Material) $100*20 Dr Inventory (Prot in Inventory) $25*20 Cr Interorganization Payable $125*20
Sales issue from Organization B: 6units at $125 per unit
Dr DCOGS (Material) $100*6 Dr DCOGS (Prot in Inventory) $25*6
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
183
Event Accounting Entries
Cr Inventory (Material) $100*6 Cr Inventory (Prot in Inventory) $25*6
100 percent COGS recognition forsales issue
Dr COGS (Material) $100*6 Cr DCOGS (Material) $100*6 Dr COGS (Prot in Inventory) $25*6 Cr DCOGS (Prot in Inventory) $25*6
The cost distribution processor creates accounting entries for the IPV adjustment to inventory value, and to propagatethe IPV adjustment to the interorganization transfer, and to the sales issues from Organization A and Organization B.The following table describes those accounting entries :
Event Accounting Entries
Organization A Inventory costadjustment: 100 at $20
Dr Inventory (Material) $20*100 Cr Receiving Inspection $20*100
Propagate adjustment tointerorganization transfer fromOrganization A to Organization B: 20units at $20 Because the transfer priceremains the same, we revalue theinterorganization gain/loss.
Dr Interorganization Gain/Loss $20*20 Cr Inventory (Material) $20*20
Propagate adjustment tointerorganization receipt byOrganization B from Organization A:20 units at $20
Dr Inventory (Material) $20*20 Cr Oset Account $20*20 Dr Oset Account $20*20 Cr Inventory (Prot in Inventory) $20*20
Propagate adjustment to sales issuefrom Organization A: 30 units at $20
Dr COGS $20*30 Cr Inventory (Material) $20*30
Propagate adjustment to sales issuefrom Organization A: 30 units at $20
Dr DCOGS (Material) $20*30 Cr Inventory (Material) $20*30
Propagate adjustment to COGSrecognition
Dr COGS (Material) $20*30
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
184
Event Accounting Entries
Dr DCOGS (Material) $20*30
Propagate adjustment to sales issuefrom Organization B: 6 units at $20
Dr DCOGS (Material) $20*6 Cr Inventory (Material) $20*6 Dr Inventory (Prot in Inventory) $20*6 Cr DCOGS (Prot in Inventory) $20*6
Propagate adjustment to COGSrecognition
Cr COGS (Prot in Inventory) $20*6 Dr DCOGS (Prot in Inventory) $20*6 Dr COGS (Material) $20*6 Cr DCCOGS (Material) $20*6
Examples of Backdating of TransactionsBy seing the cost cuto date for a cost accounting period, you can manage which transactions are processed in thatperiod, including backdated transactions. The following examples illustrate how the cost processor sets the accounteddate for backdated transactions.
ScenarioAssume that the current date is November 2, and the cost cuto date is October 31.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
185
The following costed and uncosted transactions are in process.
November 2
Costed Transaction 1
Costed Transaction 2
October 30
Costed Transaction 1
Uncosted Transaction 3
Uncosted Transaction 2
October 31
Uncosted Transaction 1
Uncosted Transaction 2
November 1
Cost Cutoff Date October 31
Example 1Transactions are backdated to a point before the latest costed transaction.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
186
In the following gure, the inventory transaction is backdated to position A. The transaction is costed with accountingdate B before transactions 2 and 3 are processed. The transaction created on November 2 and backdated to October 30is costed with the eective date of October 31.
November 2
Costed Transaction 1
Costed Transaction 2
October 30
Costed Transaction 1
Uncosted Transaction 3
Uncosted Transaction 2
October 31
Uncosted Transaction 1
Uncosted Transaction 2
November 1
Cost Cutoff Date October 31
A
B
Example 2Transactions are backdated to a point between the latest costed transaction and the cost cuto date.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
187
In the following gure, the inventory transaction is backdated to position C. The transaction is costed with accountingdate C after transactions 2 and 3 are processed. The transaction created on November 2 and backdated to October 31 iscosted with the eective date of October 31.
November 2
Costed Transaction 1
Costed Transaction 2
October 30
Costed Transaction 1
Uncosted Transaction 3
Uncosted Transaction 2
October 31
Uncosted Transaction 1
Uncosted Transaction 2
November 1
Cost Cutoff Date October 31
C
Example 3Transactions are backdated to a point after the cost cuto date.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
188
In the following gure, the inventory transaction is backdated to position D. The transaction is costed with accountingdate D after the cost cuto is moved past October 31. The transaction created on November 2 and backdated toNovember 1 is costed with the eective date of November 1.
Uncosted Transaction 1
November 2
Costed Transaction 1
Costed Transaction 2
October 30
Costed Transaction 1
Uncosted Transaction 3
Uncosted Transaction 2
October 31
Uncosted Transaction 1
Uncosted Transaction 2
November 1
Cost Cutoff Date October 31
D
Example of Accounting of Trade Transactions in Internal DropShipmentsAn internal drop shipment is a trade transaction involving the movement of goods from an inventory organizationdirectly to a customer, yet the business unit that sells the goods to the customer is dierent from the business unitto which the inventory organization belongs. From the nancial standpoint, the business unit to which the inventoryorganization belongs sells the goods to the other business unit who, in turn, sells the goods to the customer.
The following is an example of accounting performed by Oracle Fusion Cost Accounting and Oracle Fusion ReceiptAccounting for an internal drop shipment. It illustrates:
• Transactions that are captured in Oracle Fusion Supply Chain Financial Orchestration and interfaced to ReceiptAccounting and Cost Accounting.
• Accounting entries that Receipt Accounting and Cost Accounting generate for the drop shipment ow from theselling organization to the customer of the buying organization.
• Accounting entries that Receipt Accounting and Cost Accounting generate for the return ow from thecustomer to the seller.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
189
ScenarioChina Ltd. drop ships the goods to the customer of US Inc.
Transactions from Oracle Fusion Supply Chain Financial OrchestrationThe trade agreement, accounting rule sets, and associated purchase orders are set up in Oracle Fusion Supply ChainFinancial Orchestration, and the transactions ow into Receipt Accounting and Cost Accounting based on this setup:
• China Ltd. acquires goods locally at the cost of USD 50, plus USD 10 overhead on the receipt of goods.
• Intercompany transfer price from China Ltd. to US Inc. is USD 100.
• Intercompany invoicing is set to Yes.
• Overhead rule is congured in Cost Accounting for transaction type Trade in-Transit Receipt in CostOrganization CO1.
• US Inc. books a prot of USD 40 (USD 100 transfer price - USD 50 PO price - USD 10 overhead).
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the transfer of goods.
Accounting Entries
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
190
The following gure illustrates accounting entries for the shipment from legal entity China Ltd. to legal entity US Inc.
Legend LE = Legal Entity BU = Business Unit MAT = Material OVH = Overhead IC = Intercompany COGS = Cost of Goods Sold DCOGS = Deferred COGS AR = Accounts Receivable AP = Accounts payable GP = Gross Profit Cst Org = Cost Organization Inv Org = Inventory Organization IO = Interorganization
Sales Order Issue Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Cr Inventory MAT $50 Cr Inventory OVH $10
Trade In-Transit Issue Dr IC COGS MAT $50 Dr IC COGS OVH $10 Cr Trade In-Transit MAT $50 Cr Trade in-Transit OVH $10
China Ltd (LE)CN (Profit Ctr BU)
CO1 (Cst Org)M1 (Inv Org)
Trade Receipt Accrual Dr Trade Clearing $100 Cr IC Accrual $100
Trade In-Transit Receipt Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Dr Trade In-Transit GP $40 Cr Trade Clearing $100
Trade Sales Issue Dr DCOGS MAT $50 Dr DCOGS OVH $10 Dr DCOGS GP $40 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10 Cr Trade In-Transit GP $40
US Inc (Sold-to LE)US West (Sold-to Profit Ctr
BU)CO2 (Sold-to Cst Org)M2 (Sold-to Inv Org)
IC AP Invoice Dr IC Accrual $100 Cr IC Liatility $100
Customer AR Invoice Dr Receivable $120 Cr Revenue $120
COGS Recognition Dr COGS MAT $50 Dr COGS OVH $10 Dr COGS GP $40 Cr DCOGS MAT $50 Cr DCOGS OVH $10 Cr DCOGS GP $40
Customer
IC AR Invoice Dr IC Receivable $100 Cr IC Revenue $100
Cost Accounting generates distributions under cost organization CO1 and inventory organization M1.
The following table describes the cost accounting entries.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
191
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Sales OrderIssue
Trade In-Transit
50
USD
Material
Current Cost
CostAccounting
Sales OrderIssue
Trade In-Transit
10
USD
Overhead
Current Cost
CostAccounting
Sales OrderIssue
Inventory
-50
USD
Material
Current Cost
CostAccounting
Sales OrderIssue
Inventory
-10
USD
Overhead
Current Cost
CostAccounting
Trade In-Transit Issue
IntercompanyCost of GoodsSold
50
USD
Material
Current Cost
CostAccounting
Trade In-Transit Issue
IntercompanyCost of GoodsSold
10
USD
Overhead
Current Cost
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-50
USD
Material
Current Cost
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-10
USD
Overhead
Current Cost
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyReceivable
100
USD
Not Applicable
Transfer Price
AccountsReceivable
IntercompanyAccountsReceivableInvoice
IntercompanyRevenue
-100
USD
Not Applicable
Transfer Price
Receipt Accounting generates distributions under business unit US West and inventory organization M2. CostAccounting generates distributions under cost organization CO2 and inventory organization M2.
The following table describes the receipt and cost accounting entries.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
192
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not Applicable
Transfer Price
ReceiptAccounting
Trade ReceiptAccrual
IntercompanyAccrual
-100
USD
Not Applicable
Transfer Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
50
USD
Material
SendingOrganizationCost
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
40
USD
Prot inInventory
InternalMarkup
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-100
USD
Material,Overhead,and Prot inInventory
Transfer Price
AccountsPayable
IntercompanyAccountsPayable Invoice
IntercompanyAccrual
100
USD
Not Applicable
Transfer Price
AccountsPayable
IntercompanyAccountsPayable Invoice
IntercompanyLiability
-100
USD
Not Applicable
Transfer Price
CostAccounting
Trade SalesIssue
Deferred Costof Goods Sold
50
USD
Material
SendingOrganizationCost
CostAccounting
Trade SalesIssue
Deferred Costof Goods Sold
10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade SalesIssue
Deferred Costof Goods Sold
40
USD
Prot inInventory
InternalMarkup
CostAccounting
Trade SalesIssue
Trade In-Transit
-50
USD
Material
SendingOrganizationCost
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
193
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Trade SalesIssue
Trade In-Transit
-10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade SalesIssue
Trade In-Transit
-40
USD
Prot inInventory
InternalMarkup
The customer returns goods directly to China Ltd.
The following gure illustrates accounting entries for the return ow from US Inc (Sold-to Legal Entity) to China Ltd(Legal Entity).
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
194
Legend LE = Legal Entity BU = Business Unit MAT = Material OVH = Overhead IC = Intercompany COGS = Cost of Goods Sold DCOGS = Deferred COGS AR = Accounts Receivable AP = Accounts payable GP = Gross Profit Cst Org = Cost Organization Inv Org = Inventory Organization IO = Interorganization
RMA Receipt Dr Inentory MAT $50 Dr Inventory OVH $10 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10
Trade In-Transit Return Receipt Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Cr IC COGS MAT $50 Cr IC COGS OVH $10
China Ltd (LE)CN (Profit Ctr BU)
CO1 (Cst Org)M1 (Inv Org)
Trade Receipt Accrual Dr IC Accrual $100 Cr Trade Clearing $100
Trade In-Transit Return Dr Trade Clearing $100 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10 Cr Trade In-Transit GP $40
Trade Sales Return Receipt Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Dr Trade In-Transit GP $40 Cr DCOGS MAT $50 Cr DCOGS OVH $10 Cr DCOGS GP $40
US Inc (Sold-to LE)US West (Sold-to Profit Ctr
BU)CO2 (Sold-to Cst Org)M2 (Sold-to Inv Org)
IC AP Debit Memo Dr IC Liability $100 Cr IC Accrual $100
Customer AR Credit Memo Dr Revenue $120 Cr Receivable $120
RMA Gain/Loss Recognition Dr Deferred RMA Gain/Loss MAT $50 Dr Deferred RMA Gain/Loss OVH $10 Dr Deferred RMA Gain/Loss GP $40 Cr RMA Gain/Loss MAT $50 Cr RMA Gain/Loss OVH $10 Cr RMA Gain/Loss GP $40
Customer
IC AR Credit Memo Dr IC Revenue $100 Cr IC Receivable $100
Receipt Accounting generates distributions under business unit US West and inventory organization M2. CostAccounting generates distributions under cost organization CO2 and inventory organization M2.
The following table describes those receipt and cost accounting entries.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReturnAccrual
IntercompanyAccrual
100
USD
Not Applicable
Transfer Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
195
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReturnAccrual
Trade Clearing
-100
USD
Not Applicable
Transfer Price
CostAccounting
Trade In-Transit Return
Trade Clearing
100
USD
Split into threelines (Material,Overhead,and Prot inInventory)
Transfer Price
CostAccounting
Trade In-Transit Return
Trade In-Transit
-50
USD
Material
SendingOrganizationCost
CostAccounting
Trade In-Transit Return
Trade In-Transit
-10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade In-Transit Return
Trade In-Transit
-40
USD
Prot inInventory
InternalMarkup
AccountsPayable
IntercompanyAccountsPayable DebitMemo
IntercompanyLiability
100
USD
Not Applicable
Transfer Price
AccountsPayable
IntercompanyAccountsPayable DebitMemo
IntercompanyAccrual
-100
USD
Not Applicable
Transfer Price
CostAccounting
Trade SalesReturn Receipt
Trade In-Transit
50
USD
Material
SendingOrganizationCost
CostAccounting
Trade SalesReturn Receipt
Trade In-Transit
10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade SalesReturn Receipt
Trade In-Transit
40
USD
Prot inInventory
InternalMarkup
CostAccounting
Trade SalesReturn Receipt
Deferred RMAGain/Loss
-50
USD
Material
SendingOrganizationCost
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
196
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Trade SalesReturn Receipt
Deferred RMAGain/Loss
-10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade SalesReturn Receipt
Deferred RMAGain/Loss
-40
USD
Prot inInventory
InternalMarkup
Receipt Accounting generates distributions under business unit CN and inventory organization M1. Cost Accountinggenerates distributions under cost organization CO1 and inventory organization M1.
The following table describes those accounting entries.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
RMA Receipt
Inventory*
50
USD
Material
Current Cost
CostAccounting
RMA Receipt
Inventory
10
USD
Overhead
Current Cost
CostAccounting
RMA Receipt
Trade In-Transit
-50
USD
Material
Current Cost
CostAccounting
RMA Receipt
Trade In-Transit
-10
USD
Overhead
Current Cost
CostAccounting
Trade In-Transit ReturnReceipt
Trade In-Transit
50
USD
Material
Current Cost
CostAccounting
Trade In-Transit ReturnReceipt
Trade In-Transit
10
USD
Overhead
Current Cost
CostAccounting
Trade In-Transit ReturnReceipt
IntercompanyCost of GoodsSold
-50
USD
Material
Current Cost
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
197
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Trade In-Transit ReturnReceipt
IntercompanyCost of GoodsSold
-10
USD
Overhead
Current Cost
AccountsReceivable
IntercompanyAccountsReceivableCredit Memo
IntercompanyRevenue
100
USD
Not Applicable
Transfer Price
AccountsReceivable
IntercompanyAccountsReceivableCredit Memo
IntercompanyReceivable
-100
USD
Not Applicable
Transfer Price
* Inventory is received at the current cost, and the dierence between transfer price and cost is booked as cost variance.
Related Topics• Overview of Global Procurement Trade Accounting• Review Item Cost and Global Procurement Trade Transaction Accounting• Example of Accounting of Global Procurement Trade Transactions into Inventory
Example of Accounting of Interorganization Transfers Within theSame Business UnitAn interorganization transfer is a trade transaction involving the movement of goods or services between organizationsin the supply chain. When the transfer occurs between organizations within the same prot center business unit, thetransfer is always at cost and there is no intercompany invoicing. Oracle Fusion Cost Accounting creates the tradeevents and they do not ow through Oracle Fusion Supply Chain Financial Orchestration.
The following is an example of accounting performed by Oracle Fusion Receipt Accounting and Oracle Fusion CostAccounting for an interorganization transfer of goods between inventory organizations within the same prot centerbusiness unit.
ScenarioInventory organization M1 makes a transfer of goods to inventory organization M2. Both inventory organizations areunder the prot center business unit US West, which is under the legal entity US Inc.
Interorganization TransferThe cost of goods transferred from M1 to M2 is USD 50 plus overhead of USD 10.
AnalysisReceipt Accounting and Cost Accounting create accounting entries for the transfer of goods.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
198
The following gure illustrates those accounting entries.
Trade Receipt Accrual Dr Trade Clearing $60 Cr IO Payable $60
Trade In-Transit ReceiptDr Trade In-Transit MAT $50Dr Trade In-Transit OVH $10Cr Trade Clearing $60
Interorganization Delivery Dr Inventory MAT $50 Dr Inventory OVH $10 Cr Receiving Inspection $60
Legend LE = Legal Entity BU = Business Unit MAT = Material OVH = Overhead IC = Intercompany COGS = Cost of Goods Sold AR = Accounts Receivable AP = Accounts payable GP = Gross Profit Cst Org = Cost Organization Inv Org = Inventory Organization IO = Interorganization
US Inc (Receiving LE)US West (Receiving Profit
Ctr BU)CO2 (Receiving Cst Org)M2 (Receiving Inv Org)
Interorganization ReceiptDr Receiving Inspection $60Cr Trade In-Transit $60
In-Transit Shipment Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Cr Inventory MAT $50 Cr Inventory OVH $10
Trade In-Transit Issue Dr IO Receivable $60 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10
US Inc (Shipping LE)US West (Shipping Profit
Ctr BU)CO1 (Shipping Cst Org)M1 (Shipping Inv Org)
Accounting EntriesReceipt Accounting generates distributions under business unit US West and inventory organization M1. CostAccounting generates distributions under cost organization CO1 and inventory organization M1.
The following table describes the cost accounting entries.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
199
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
In-TransitShipment
Trade In-Transit
50
USD
Material
Current Cost
CostAccounting
In-TransitShipment
Trade In-Transit
10
USD
Overhead
Current Cost
CostAccounting
In-TransitShipment
Inventory
-50
USD
Material
Current Cost
CostAccounting
In-TransitShipment
Inventory
-10
USD
Overhead
Current Cost
CostAccounting
Trade In-Transit Issue
InterorganizationReceivable
60
USD
Material +Overhead
Current Cost
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-50
USD
Material
Current Cost
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-10
USD
Overhead
Current Cost
Receipt Accounting generates distributions under business unit US West and inventory organization M2. CostAccounting generates distributions under cost organization CO2 and inventory organization M2.
The following table describes the receipt and cost accounting entries.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
60
USD
Not Applicable
SendingOrganizationCost
ReceiptAccounting
Trade ReceiptAccrual
InterorganizationPayable
-60
USD
Not Applicable
SendingOrganizationCost
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
50
USD
Material
SendingOrganizationCost
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
200
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-60
USD
Material +Overhead
SendingOrganizationCost
ReceiptAccounting
InterorganizationReceipt
ReceivingInspection
60
USD
Not Applicable
SendingOrganizationCost
ReceiptAccounting
InterorganizationReceipt
Trade In-Transit
-60
USD
Not Applicable
SendingOrganizationCost
CostAccounting
InterorganizationDelivery
Inventory
50
USD
Material
SendingOrganizationCost
CostAccounting
InterorganizationDelivery
Inventory
10
USD
Overhead
SendingOrganizationCost
CostAccounting
InterorganizationDelivery
ReceivingInspection
-60
USD
Material +Overhead
SendingOrganizationCost
Related Topics
• Example of Accounting of Interorganization Transfers Across Business Units
• Review Item Cost and Global Procurement Trade Transaction Accounting
Example of Accounting of Interorganization Transfers AcrossBusiness UnitsThis example illustrates:
• Transactions that are captured in Oracle Fusion Supply Chain Financial Orchestration and interfaced to ReceiptAccounting and Cost Accounting.
• Accounting entries that Receipt Accounting and Cost Accounting generate for the transfer of goods acrossprot center business units.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
201
ScenarioChina Ltd. ships the goods to US Inc. The organizations are in two dierent prot center business units.
Transactions from Oracle Fusion Supply Chain Financial OrchestrationThe trade agreement, accounting rule sets, and associated purchase orders are set up in Supply Chain FinancialOrchestration, and the transactions ow into Receipt Accounting and Cost Accounting based on this setup:
• China Ltd. acquires goods locally at the cost of USD 50, plus USD 10 overhead on the receipt of goods.
• Intercompany transfer price from China Ltd. to US Inc. is USD 100.
• Intercompany invoicing is set to No.
• Prot tracking is set to Yes.
• Overhead rule is congured in Cost Accounting for transaction type Trade in-Transit Receipt in CostOrganization CO1.
• China Ltd. books a prot of USD 40 (USD 100 transfer price - USD 50 acquisition cost - USD 10 overhead).
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the transfer of goods.
Accounting Entries
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
202
The following gure illustrates accounting entries for the shipment from legal entity China Ltd. to legal entity US Inc.
Trade Receipt Accrual Dr Trade Clearing $100 Cr IO Payable $100
Trade In-Transit ReceiptDr Trade In-Transit MAT $50Dr Trade In-Transit OVH $10Dr Trade In-Transit GP $40Cr Trade Clearing $100
Interorganization Delivery Dr Inventory MAT $50 Dr Inventory OVH $10 Dr Inventory GP $40 Cr Receiving Inspection $100
Legend LE = Legal Entity BU = Business Unit MAT = Material OVH = Overhead IC = Intercompany COGS = Cost of Goods Sold AR = Accounts Receivable AP = Accounts payable GP = Gross Profit Cst Org = Cost Organization Inv Org = Inventory Organization IO = Interorganization
US Inc (Receiving LE)US West (Receiving Profit
Ctr BU)CO2 (Receiving Cst Org)M2 (Receiving Inv Org)
Interorganization ReceiptDr Receiving Inspection $100Cr Trade In-Transit $100
In-Transit Shipment Dr Trade In-Transit MAT $50 Dr Trade In-Transit OVH $10 Cr Inventory MAT $50 Cr Inventory OVH $10
Trade In-Transit Issue Dr IO Receivable $100 Cr Trade In-Transit MAT $50 Cr Trade In-Transit OVH $10 Cr IO Gain/Loss $40
China Ltd (LE)CN (Profit Ctr BU)
CO1 (Cst Org)M1 (Inv Org)
Cost Accounting generates distributions under cost organization CO1 and inventory organization M1.
The following table describes the distributions:
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
203
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
In-TransitShipment
Trade In-Transit
50
USD
Material
Current Cost
CostAccounting
In-TransitShipment
Trade In-Transit
10
USD
Overhead
Current Cost
CostAccounting
In-TransitShipment
Inventory
-50
USD
Material
Current Cost
CostAccounting
In-TransitShipment
Inventory
-10
USD
Overhead
Current Cost
CostAccounting
Trade In-Transit Issue
InterorganizationReceivable
100
USD
Material,Overhead
Transfer Price
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-50
USD
Material
Current Cost
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-10
USD
Not applicable
InternalMarkup(Transfer Priceminus CurrentCost)
CostAccounting
Trade In-Transit Issue
InterorganizationGain/Loss
-40
USD
Not applicable
InternalMarkup
Receipt Accounting generates distributions under business unit US West and inventory organization M2. CostAccounting generates distributions under cost organization CO2 and inventory organization M2.
The following table describes those distributions.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not applicable
Transfer Price
ReceiptAccounting
Trade ReceiptAccrual
InterorganizationPayable
-100
USD
Not applicable
Transfer Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
204
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
50
USD
Material
SendingOrganizationCost
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
10
USD
Overhead
SendingOrganizationCost
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
40
USD
Prot inInventory
InternalMarkup
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-100
USD
Material,Overhead,and Prot inInventory
Transfer Price
ReceiptAccounting
InterorganizationReceipt
ReceivingInspection
100
USD
Not applicable
Transfer Price
ReceiptAccounting
InterorganizationReceipt
Trade In-Transit
-100
USD
Not applicable
Transfer Price
CostAccounting
InterorganizationDelivery
Inventory
50
USD
Material
SendingOrganizationCost
CostAccounting
InterorganizationDelivery
Inventory
10
USD
Overhead
SendingOrganizationCost
CostAccounting
InterorganizationDelivery
Inventory
40
USD
Prot inInventory
InternalMarkup
CostAccounting
InterorganizationDelivery
ReceivingInspection
-100
USD
Material,Overhead,and Prot inInventory
Transfer Price
Related Topics
• Example of Accounting of Interorganization Transfers Within the Same Business Unit
• Review Item Cost and Global Procurement Trade Transaction Accounting
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
205
Example of Consigned Inventory Accounting in a Simple PurchaseOrderWhen an organization receives a shipment of goods under a consignment purchase order, the ownership of the goodsremains with the supplier even after they are in the custody of the buyer. Ownership passes from the supplier to thebuyer when the inventory is consumed.
When the inventory is consumed, two events occur: First there is a transfer of ownership to the buyer and the consignedgoods become owned inventory for a brief period of time, then the owned inventory is depleted.
The following example illustrates:
• The physical and nancial ow of consigned inventory under a consigned purchase order (PO).
• The transaction that ows from Oracle Fusion Inventory Management into Oracle Fusion Cost Accounting andOracle Fusion Receipt Accounting.
• Accounting entries that Cost Accounting and Receipt Accounting generate for the forward ow.
• Accounting entries that Cost Accounting and Receipt Accounting generate for the return ow.
ScenarioSupplier Advanced Network Devices (AND-Fresno) ships the goods under a consigned purchase order to inventoryorganization M1-Seale.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
206
The following diagram illustrates the ow of consigned inventory:
SupplierAdvanced Network Devices
(AND-Fresno)
Inventory Organization M1-SeattleConsigned Owner = AND-FresnoContingent Owner = M1-Seattle
Inventory Organization M1-SeattleOwner = M1-Seattle
OwnershipChange
Financial Flow
Physical Flow
Transaction from Oracle Fusion Inventory ManagementCost Accounting and Receipt Accounting receive the following transaction from Inventory:
• Supplier Advanced Network Devices (AND-Fresno).
• Consignment Purchase Order #1000.
• Purchase Order price USD 100.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
207
• Ship-to organization is M1-Seale which is the contingent owner. Contingent owner assumes ownership fromthe supplier when inventory is consumed.
• Receipt and put away transactions performed in M1-Seale inventory organization in consigned status.
• When the goods are consumed ownership changes from supplier AND-Fresno to inventory organization M1-Seale.
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the forward and return shipment of goods.
Accounting Entries
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
208
The following diagram illustrates the accounting entries for the forward ow from supplier AND-Fresno to inventoryorganization M1-Seale.
AND-FresnoSupplier
Physical Flow
M1-SeattleConsigned Owner
M1- SeattleOwner
Ownership Change
M1:Transfer to Owned (Receipt)
Dr Inventory ValuationCr Trade In-Transit
M1:Transfer to Owned IssueDr Consigned Inventory Offset
Cr Consigned Inventory
M1:Trade Receipt AccrualDr Trade Clearing
Cr Accrual
M1:Trade In-Transit ReceiptDr Trade In-TransitCr Trade Clearing
M1:PO ReceiptDr Consigned ClearingCr Consigned Accrual
M1:PO DeliveryDr Consigned InventoryCr Consigned Clearing
M1:Consigned Receipt ConsumptionDr Consigned AccrualCr Consigned Clearing
Receipt Accounting and Cost Accounting generate accounting entries under inventory organization M1-Seale for thereceipt of goods.
The following table describes those accounting entries:
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
209
Subledger Event Type AccountingLine Type
TransactionType
Amount inFunctionalCurrency
FunctionalCurrency
Basis ofAmount
ReceiptAccounting
PO Receipt
ConsignedClearing
Debit
100
USD
PO Price
ReceiptAccounting
PO Receipt
ConsignedAccrual
Credit
100
USD
PO Price
CostAccounting
PO Delivery
ConsignedInventory
Debit
100
USD
PO Price
CostAccounting
PO Delivery
ConsignedClearing
Credit
100
USD
PO Price
Receipt Accounting and Cost Accounting generate accounting entries under inventory organization M1-Seale for thechange of ownership from supplier AND-Fresno to M1-Seale.
The following table describes those accounting entries:
Subledger Event Type AccountingLine Type
TransactionType
Amount inFunctionalCurrency
FunctionalCurrency
CostElement
Basis ofAmount
CostAccounting
Transfer toOwned Issue
ConsignedInventoryOset
Debit
100
USD
Material
PO Price
CostAccounting
Transfer toOwned Issue
ConsignedInventory
Credit
100
USD
Material
PO Price
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedAccrual
Debit
100
USD
Notapplicable
PO Price
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedClearing
Credit
100
USD
Notapplicable
PO Price
ReceiptAccounting
TradeReceiptAccrual
TradeClearing
Debit
100
USD
Notapplicable
PO Price
ReceiptAccounting
TradeReceiptAccrual
Accrual
Credit
100
USD
Notapplicable
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
210
Subledger Event Type AccountingLine Type
TransactionType
Amount inFunctionalCurrency
FunctionalCurrency
CostElement
Basis ofAmount
CostAccounting
Trade In-TransitReceipt
Trade In-Transit
Debit
100
USD
Material
PO Price
CostAccounting
Trade In-TransitReceipt
TradeClearing
Credit
100
USD
Material
PO Price
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
Debit
100
USD
Material
PO Price
CostAccounting
Transferto Owned(Receipt)
Trade In-Transit
Credit
100
USD
Material
PO Price
Organization M1-Seale returns goods to supplier AND-Fresno.
This gure illustrates the accounting entries for the return ow from M1-Seale to AND-Fresno.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
211
AND-FresnoSupplier
Physical Flow
M1-SeattleConsigned Owner
M1- SeattleOwner
Ownership Change
M1:Transfer to Cons (Issue)Dr Trade In-Transit
Cr Inventory Valuation
M1:Transfer to Cons (Recpt)Dr Consigned Inventory
Cr Consigned Inventory Offset
M1:Trade Return AccrualDr Accrual
Cr Trade Clearing
M1:Trade In-Transit ReturnDr Trade ClearingCr Trade In-Transit
M1:PO Return to VendorDr Consigned AccrualCr Consigned Clearing
M1:PO Return to ReceivingDr Consigned ClearingCr Consigned Inventory
LegendCons = Consigned
Recpt = Receipt
M1:Consigned Recpt Consumption
Dr Consigned ClearingCr Consigned Accrual
Receipt Accounting and Cost Accounting generate accounting entries under inventory organization M1-Seale for thechange of ownership from M1-Seale to supplier AND-Fresno.
The following table describes the accounting entries for the change in ownership.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
212
Subledger Event Type AccountingLine Type
TransactionType
Amount inFunctionalCurrency
FunctionalCurrency
CostElement
Basis ofAmount
CostAccounting
Transfer toConsigned(Receipt)
ConsignedInventory
Debit
100
USD
Material
PO Price
CostAccounting
Transfer toConsigned(Receipt)
ConsignedInventoryOset
Credit
100
USD
Material
PO Price
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedClearing
Debit
100
USD
Notapplicable
PO Price
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedAccrual
Credit
100
USD
Notapplicable
PO Price
ReceiptAccounting
TradeReturnAccrual
Accrual
Debit
100
USD
Notapplicable
PO Price
ReceiptAccounting
TradeReturnAccrual
TradeClearing
Credit
100
USD
Notapplicable
PO Price
ReceiptAccounting
Trade In-TransitReturn
TradeClearing
Debit
100
USD
Notapplicable
PO Price
ReceiptAccounting
Trade In-TransitReturn
Trade In-Transit
Credit
100
USD
Notapplicable
PO Price
CostAccounting
Transfer toConsignedIssue
Trade In-Transit
Debit
100
USD
Material
PO Price
CostAccounting
Transfer toConsignedIssue
CostVariance*
Debit
5
USD
Notapplicable
Inventory isreceived atthe currentcost, and thedierencebetweentransferprice andcost isbookedas costvariance.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
213
Subledger Event Type AccountingLine Type
TransactionType
Amount inFunctionalCurrency
FunctionalCurrency
CostElement
Basis ofAmount
CostAccounting
Transfer toConsignedIssue
InventoryValuation
Credit
105
USD
Material
Current Cost
* Inventory is received at the current cost, and the dierence between transfer price and cost is booked as cost variance.
Receipt Accounting generates accounting entries under inventory organization M1-Seale for the return of consignedgoods from M1-Seale to AND-Fresno.
The following table describes those accounting entries:
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
ReceiptAccounting
PO Return toSupplier
Consigned Accrual
100
USD
PO Price
ReceiptAccounting
PO Return toSupplier
ConsignedClearing
-100
USD
PO Price
ReceiptAccounting
PO Return toReceiving
ConsignedClearing
100
USD
PO Price
ReceiptAccounting
PO Return toReceiving
ConsignedInventory
-100
USD
PO Price
Related Topics• Cost Proles, Default Cost Proles, and Item Cost Proles• What are the accounting distribution basis options for consigned inventory transactions• Consigned Inventory Lifecycle• Consigned Inventory
Example of Consigned Inventory Accounting in a Global PurchaseOrderMost large enterprises use a global procurement approach to their purchasing needs, where a central buyingorganization buys goods from suppliers on behalf of the internal organizations. This includes trade transactionsinvolving consigned inventory executed under a global purchase order. Oracle Fusion Receipt Accounting and OracleFusion Cost Accounting process these consigned inventory transactions and generate subledger journal entries.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
214
The following example illustrates:
• The physical and nancial ow of consigned inventory in a global purchase order.
• Transactions that ow from Oracle Fusion Inventory into Cost Accounting and Receipt Accounting.
• Transactions that ow from Oracle Fusion Supply Chain Financial Orchestration into Cost Accounting andReceipt Accounting.
• Accounting entries that Cost Accounting and Receipt Accounting generate for the forward ow.
• Accounting entries that Cost Accounting and Receipt Accounting generate for the return ow.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
215
ScenarioThe supplier AND-Fresno ships the goods in consigned status to inventory organization M2-LA, through the purchasingtrade organization M1-Seale.
SupplierAdvanced Network Devices
(AND-Fresno)
Sold-to Legal EntitySold-to Profit Center BU 1
Purchasing Trade Org = M1-Seattle
Profit Center BU 2Inventory Organization M2-LA
Owner = M2-LA
OwnershipChange
FinancialFlow
Profit Center BU 2Ship-To Inventory Org M2-LA
Consigned Owner = AND-FresnoContingent Owner = M2-LAFinancial
Flow
PhysicalFlow
LegendBU = Business UnitOrg = Organization
Interfaced TransactionsCost Accounting and Receipt Accounting receive the following transaction from Oracle Fusion Inventory:
• Consignment Purchase Order (PO) #1000.
• Purchase Order price USD 100.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
216
• Sold-to Legal Entity is LE1.
• Ship-to organization is M2-LA which is also the contingent owner. Contingent owner assumes ownership fromthe supplier when inventory is consumed.
• Receipt and put away transactions performed in M2-LA in consigned status.
• Ownership changes from supplier AND-Fresno to M2-LA through M1-Seale when the goods are consumed.
The trade agreement, accounting rule sets, and associated purchase orders are set up in Supply Chain FinancialOrchestration, and the transactions ow into Receipt Accounting and Cost Accounting. The shipment from supplier toinventory organization M2-LA is based on trade agreement GP #123 which has the following terms:
• Intercompany transfer price is USD 120.
• Intercompany invoicing is set to Yes.
• Prot tracking is set to Yes.
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the forward and return shipment of goods.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
217
Accounting EntriesThe following are accounting entries for the forward ow.
Legend Inv = Inventory IC = Intercompany COGS = Cost of Goods Sold Recpt = Receipt MAT = Material GP = Gross Profit
AND-FresnoSupplier
M2-LAConsigned Owner =
AND-FresnoContingent Owner =
M2-LA
M1-SeattleOwner
Physical Flow
M2:PO ReceiptDr Consigned ClearingCr Consigned Accrual
M2:PO DeliveryDr Consigned InventoryCr Consigned Clearing
M1:Trade In-Transit Issue
Dr IC COGSCr Trade In-Transit
M2:Transfer to Owned (Receipt)
Dr Inv Valuation MATDr Inv Valuation GP
Cr Trade In-Transit MATCr Trade In-Transit GP
M2:Transfer to Owned Issue
Dr Consigned Inv OffsetCr Consigned Inventory
M2:Trade In-Transit RecptDr Trade In-Transit MATDr Trade In-Transit GP
Cr Trade Clearing
M1:Trade Receipt Accrual
Dr Trade ClearingCr Accrual
M2:Trade Recpt AccrualDr Trade Clearing
Cr IC Accrual
M1:Trade In-Transit Recpt
Dr Trade In-TransitCr Trade Clearing
M2:Consigned Receipt Consignment
Dr Consigned AccrualCr Consigned Clearing
OwnershipChange
OwnershipChange
Receipt Accounting generates distributions under inventory organization M2-LA for the consigned shipment fromsupplier AND-Fresno to M2-LA.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
218
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
ReceiptAccounting
PO Receipt
ConsignedClearing
100
USD
PO Price
ReceiptAccounting
PO Receipt
Consigned Accrual
-100
USD
PO Price
ReceiptAccounting
PO Delivery
ConsignedInventory
100
USD
PO Price
ReceiptAccounting
PO Delivery
ConsignedClearing
-100
USD
PO Price
Receipt Accounting and Cost Accounting generate distributions under inventory organization M1-Seale for the changeof ownership from supplier AND-Fresno to M1-Seale.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Accrual
-100
USD
Not applicable
PO Price
ReceiptAccounting
Trade In-Transit Receipt
Trade In-Transit
100
USD
Not applicable
PO Price
ReceiptAccounting
Trade In-Transit Receipt
Trade clearing
-100
USD
Not applicable
PO Price
CostAccounting
Trade In-Transit Issue
IntercompanyCost of GoodsSold
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-100
USD
Material
PO Price
Receipt Accounting and Cost Accounting generate distributions under inventory organization M2-LA for the change ofownership from M1-Seale to M2-LA.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
219
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Transfer toOwned Issue
ConsignedInventoryOset
100
USD
Material
PO Price
CostAccounting
Transfer toOwned Issue
ConsignedInventory
-100
USD
Material
PO Price
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedAccrual
100
USD
Not applicable
PO Price
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedClearing
-100
USD
Not applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
120
USD
Not applicable
Transfer Price
ReceiptAccounting
Trade ReceiptAccrual
IntercompanyAccrual
-120
USD
Not applicable
Transfer Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
20
USD
Prot inInventory
InternalMarkup
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-120
USD
Material
Transfer Price
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
100
USD
Material
PO Price
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
20
USD
Prot inInventory
InternalMarkup
CostAccounting
Transferto Owned(Receipt)
Trade In-Transit
-100
USD
Material
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
220
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Transferto Owned(Receipt)
Trade In-Transit
-20
USD
Prot inInventory
InternalMarkup
Organization M2-LA returns goods to supplier AND-Fresno. The following are accounting entries for the return ow.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
221
Legend Inv = Inventory IC = Intercompany COGS = Cost of Goods Sold Recpt = Receipt Ret = Return MAT = Material GP = Gross Profit OH = Overhead
OwnershipChange
M2:PO Return to VendorDr Consigned AccrualCr Consigned Clearing
M2:PO Ret to ReceivingDr Consigned ClearingCr Consigned Inventory
M1:Trade In-Transit Return Receipt
Dr Trade In-TransitCr IC COGS
M2:Transfer to Consigned Issue
Dr Inv Valuation MATDr Inv Valuation GPDr Inv Valuation OH
Cr trade In-Transit MATCr Trade In-TransitCr Cost Variance
M2:Transfer to Consigned (Receipt)
Dr Consigned InventoryCr Consigned Inv Offset
M2:Trade In-Transit Ret Dr Trade ClearingCr Trade In-TransitM1:Trade Ret Accrual
Dr AccrualCr Trade Clearing
M2:Trade Ret AccrualDr IC Accrual
Cr Trade Clearing
M1:Trade In-Transit RetDr Trade ClearingCr Trade In-Transit
AND-FresnoSupplier
M2-LAConsigned Owner =
AND-FresnoContingent Owner =
M2-LA
M1-SeattleOwner
OwnershipChange
PhysicalFlow
M2:Consigned Receipt Consumption
Dr Consigned ClearingCr Consigned Accrual
Receipt Accounting and Cost Accounting generate distributions under inventory organization M2-LA for the change ofownership from M2-LA to M1-Seale:
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
222
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Transfer toConsignedReceipt
ConsignedInventory
100
USD
Material
PO Price
CostAccounting
Transfer toConsignedReceipt
ConsignedInventoryOset
-100
USD
Material
PO Price
ReceiptAccounting
Trade ReturnAccrual
IntercompanyAccrual
120
USD
Not applicable
Transfer Price
ReceiptAccounting
Trade ReturnAccrual
Trade Clearing
-120
USD
Not applicable
Transfer Price
CostAccounting
Trade In-Transit Return
Trade Clearing
120
USD
Material
Transfer Price
CostAccounting
Trade In-Transit Return
Trade In-Transit
-100
USD
Material
PO Price
CostAccounting
Trade In-Transit Return
Trade In-Transit
-20
USD
Prot inInventory
InternalMarkup
CostAccounting
ConsignedReceiptConsumption
ConsignedClearing
100
USD
Material
PO Price
CostAccounting
ConsignedReceiptConsumption
ConsignedAccrual
-100
USD
Material
PO Price
CostAccounting
Transfer toConsignedIssue
InventoryValuation
100
USD
Material
PO Price
CostAccounting
Transfer toConsignedIssue
InventoryValuation
20
USD
Prot inInventory
InternalMarkup
CostAccounting
Transfer toConsignedIssue
InventoryValuation
10
USD
Overhead
Not applicable
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
223
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Transfer toConsignedIssue
Trade In-Transit
-100
USD
Material
PO Price
CostAccounting
Transfer toConsignedIssue
Trade In-Transit
-20
USD
Prot inInventory
InternalMarkup
CostAccounting
Transfer toConsignedIssue
Cost Variance*
-10
USD
Material
Not applicable
*Inventory is depleted at the current cost, and the dierence between transfer price and cost is booked as cost variance.
Receipt Accounting and Cost Accounting generate distributions under inventory organization M1-LA for the change ofownership from M1-LA to supplier AND-Fresno:
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReturnAccrual
Accrual
100
USD
Not applicable
PO Price
ReceiptAccounting
Trade ReturnAccrual
Trade Clearing
-100
USD
Not applicable
PO Price
CostAccounting
Trade In-Transit Return
Trade Clearing
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Return
Trade In-Transit
-100
USD
Material
PO Price
CostAccounting
Trade In-Transit ReturnReceipt
Trade In-Transit
100
USD
Material
PO Price
CostAccounting
Trade In-Transit ReturnReceipt
IntercompanyCost of GoodsSold
-100
USD
Material
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
224
Receipt Accounting generates distributions under inventory organization M2-LA for the return shipment from M2-LA tosupplier AND-Fresno:
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
ReceiptAccounting
PO Return toSupplier
Consigned Accrual
100
USD
PO Price
ReceiptAccounting
PO Return toSupplier
ConsignedClearing
-100
USD
PO Price
ReceiptAccounting
PO Return toReceiving
ConsignedClearing
100
USD
PO Price
ReceiptAccounting
PO Return toReceiving
ConsignedInventory
-100
USD
PO Price
Related Topics
• Overview of Global Procurement Trade Accounting
• What are the accounting distribution basis options for consigned inventory transactions
• Consigned Inventory Lifecycle
• Consigned Inventory
Example of Consigned Inventory Accounting of anInterorganization Transfer Across Business UnitsAn interorganization transfer is a trade transaction involving the movement of goods or services between organizationsin the supply chain. The following is an example of accounting performed by Oracle Fusion Cost Accounting and OracleFusion Receipt Accounting in a simple purchase order with an interorganization transfer of goods across prot centerbusiness units. The goods remain in consigned status until ownership changes in the receiving organization.
This example illustrates:
• Transactions captured in Oracle Fusion Inventory and interfaced to Cost Accounting and Receipt Accounting.
• Transactions captured in Oracle Fusion Supply Chain Financial Orchestration and interfaced to Cost Accountingand Receipt Accounting.
• Accounting entries that Cost Accounting and Receipt Accounting generate for the forward ow.
• Accounting entries that Cost Accounting and Receipt Accounting generate for the return ow.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
225
ScenarioSupplier Advanced Network Devices (AND-Fresno) ships the goods in consigned status to inventory organization M1-Seale, who in turn transfers the consigned goods to inventory organization M2-LA. Inventory organizations, M1-Sealeand M2-LA, are in dierent business units.
SupplierAdvanced Network Devices
(AND-Fresno)
Business Unit 1Inventory Organization M1-SeattleConsigned Owner = AND-FresnoContingent Owner = M1-Seattle
Business Unit 2Inventory Organization M2-LA
Owner = M2-LA
OwnershipChange
Financial Flow Physical Flow
Business Unit 2Inventory Organization M2-LA
Consigned Owner = AND-FresnoContingent Owner = M1-SeattleFinancial Flow
Physical Flow
Interfaced TransactionsOracle Fusion Inventory sends the following transactions to Receipt Accounting and Cost Accounting:
• Supplier Advanced Network Devices (AND-Fresno).
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
226
• Consignment Purchase Order #1000.
• Purchase Order price USD 100.
• Ship-to organization is M1-Seale which is the contingent owner. Contingent owner assumes ownership fromthe supplier when inventory is consumed.
• Receipt and put away transactions performed in M1-Seale inventory organization in consigned status.
• Goods transferred in consigned status from inventory organization M1-Seale to M2-LA.
• When the goods are consumed ownership changes from supplier AND-Fresno to inventory organization M2-LAthrough M1-Seale.
Oracle Fusion Supply Chain Financial Orchestration sets up the trade agreement, accounting rule sets, and associatedpurchase orders, and the information ows into Receipt Accounting and Cost Accounting. The transfer from M1-Sealeto M2-LA is based on trade agreement SFO #123 which has the following terms:
• Intercompany transfer price is USD 120.
• Intercompany invoicing is set to Yes.
• Prot tracking is set to Yes.
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the forward and return shipment of goods.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
227
Accounting EntriesThe following are accounting entries for the forward ow.
M1:Trade In-Transit IssueDr IC COGS
Cr Trade In-Transit
M2:Transfer to Owned (Receipt)
Dr Inv Valuation MATDr Inv Valuation GP
Cr Trade In-Transit MATCr Trade In-Transit GP
M2:Transfer to Owned Issue
Dr Consigned Inv OffsetCr Consigned Inventory
M2:Trade In-Transit Receipt
Dr Trade In-Transit MATDr Trade In-Transit GP
Cr Trade Clearing
M1:Trade Receipt AccrualDr Trade Clearing
Cr Accrual
M2:Trade Recpt AccrualDr Trade Clearing
Cr IC Accrual
M1:Trade In-Transit RecptDr Trade In-TransitCr Trade Clearing
M1:PO ReceiptDr Consigned ClearingCr Consigned Accrual
M1:PO DeliveryDr Consigned InventoryCr Consigned Clearing
M2:Consigned Trade Receipt Accrual
Dr Consigned ClearingCr Consigned Payable
M2:In-Transit DeliveryDr Consigned InventoryCr Consigned Inspection
M2:In-Transit ReceiptDr Consigned InspectionCr Consigned In-Transit
M2:Consigned Trade In-Transit Receipt
Dr Consigned In-TransitCr Consigned Clearing
M1:Consigned Trade In-Transit Issue
Dr Consigned ReceivableCr Consigned In-Transit
M1:In-Transit ShipmentDr Consigned In-TransitCr Consigned Inventory
AND-FresnoSupplier
M2-LAOwner
Physical Flow
Ownership Change
M1-SeattleConsigned Owner
M2-LAConsigned Owner
Physical Flow
Legend Inv = Inventory IC = Intercompany COGS = Cost of Goods Sold MAT = Material GP = Gross Profit Recpt = Receipt
Receipt Accounting generates distributions under inventory organization M1-Seale for the shipment from supplierAND-Fresno to M1-Seale.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
228
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
ReceiptAccounting
PO Receipt
ConsignedClearing
100
USD
PO Price
ReceiptAccounting
PO Receipt
Consigned Accrual
-100
USD
PO Price
ReceiptAccounting
PO Delivery
ConsignedInventory
100
USD
PO Price
ReceiptAccounting
PO Delivery
ConsignedClearing
-100
USD
PO Price
Cost Accounting generates distributions under inventory organization M1-Seale for the interorganization transfer fromM1-Seale to M2-LA.
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Cost Accounting
In-TransitShipment
Consigned In-Transit
100
USD
PO Price
Cost Accounting
In-TransitShipment
ConsignedInventory
-100
USD
PO Price
Cost Accounting
Consigned TradeIn-Transit Issue
ConsignedReceivable
100
USD
PO Price
Cost Accounting
Consigned TradeIn-Transit Issue
Consigned In-Transit
-100
USD
PO Price
Receipt Accounting and Cost Accounting generate distributions under inventory organization M2-LA for theinterorganization transfer from M1-Seale to M2-LA.
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
ReceiptAccounting
Consigned TradeReceipt Accrual
Trade Clearing
100
USD
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
229
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
ReceiptAccounting
Consigned TradeReceipt Accrual
Consigned In-Transit
-100
USD
PO Price
ReceiptAccounting
Consigned TradeIn-Transit Receipt
ConsignedClearing
100
USD
PO Price
ReceiptAccounting
Consigned ReceiptConsumption
Trade Clearing
-100
USD
PO Price
Cost Accounting
In-Transit Receipt
ConsignedInspection
100
USD
PO Price
Cost Accounting
In-Transit Receipt
Consigned In-Transit
-100
USD
PO Price
Cost Accounting
In-Transit Delivery
ConsignedInventory
100
USD
PO Price
Cost Accounting
In-Transit Delivery
ConsignedInspection
-100
USD
PO Price
Receipt Accounting and Cost Accounting generate distributions under inventory organization M1-Seale for the changeof ownership from supplier AND-Fresno to M1-Seale.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Accrual
-100
USD
Not applicable
PO Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-100
USD
Material
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
230
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Trade In-Transit Issue
IntercompanyCost of GoodsSold
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-100
USD
Material
PO Price
Receipt Accounting and Cost Accounting generate distributions under inventory organization M1-Seale for the changeof ownership from M1-Seale to M2-LA.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Accrual
-100
USD
Not applicable
PO Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-100
USD
Material
PO Price
CostAccounting
Trade In-Transit Issue
IntercompanyCost of GoodsSold
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-100
USD
Material
PO Price
Receipt Accounting and Cost Accounting generate distributions under inventory organization M2-LA for the change ofownership from M1-Seale to M2-LA.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
231
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Transfer toOwned Issue
ConsignedInventoryOset
100
USD
Material
PO Price
CostAccounting
Transfer toOwned Issue
ConsignedInventory
-100
USD
Material
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
120
USD
Not applicable
Transfer Price
ReceiptAccounting
Trade ReceiptAccrual
IntercompanyAccrual
-120
USD
Not applicable
Transfer Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
20
USD
Prot inInventory
InternalMarkup
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-120
USD
Material
Transfer Price
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
100
USD
Material
PO Price
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
20
USD
Prot inInventory
InternalMarkup
CostAccounting
Transferto Owned(Receipt)
Trade In-Transit
-100
USD
Material
PO Price
CostAccounting
Transferto Owned(Receipt)
Trade In-Transit
-20
USD
Prot inInventory
InternalMarkup
Inventory organization M2-LA returns the goods to supplier AND-Fresno. The return of the consignment is executed intwo parts:
• An interorganization transfer from M2-LA to M1-Seale. The accounting is the same as simple purchase orderreturn transactions.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
232
• A consignment return from M1-Seale to the supplier. The accounting is the same as regular return to suppliertransactions.
Related Topics
• Example of Consigned Inventory Accounting in a Simple Purchase Order
• Example of Consigned Inventory Accounting of an Interorganization Transfer Within the Same Business Unit
• What are the accounting distribution basis options for consigned inventory transactions
• Consigned Inventory Lifecycle
• Consigned Inventory
Example of Consigned Inventory Accounting of anInterorganization Transfer Within the Same Business UnitAn intraorganization transfer is a trade transaction involving the movement of goods or services between organizationsin the supply chain. The following is an example of accounting performed by Oracle Fusion Cost Accounting and OracleFusion Receipt Accounting for an interorganization transfer of goods within the same prot center business unit.
This example illustrates:
• Transactions captured in Oracle Fusion Inventory and interfaced to Cost Accounting and Receipt Accounting.
• Accounting entries that Cost Accounting and Receipt Accounting generate for the forward ow.
• Accounting entries that Cost Accounting and Receipt Accounting generate for the return ow.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
233
ScenarioSupplier Advanced Network Devices (AND-Fresno) ships the goods in consigned status to inventory organization M3-NY, who in turn transfers the goods to inventory organization M4-NJ. Inventory organizations, M3-NY and M4-NJ, arewithin the same business unit.
SupplierAdvanced Network Devices
(AND-Fresno)
Inventory Organization M3-NYConsigned Owner = AND-Fresno
Contingent Owner = M3-NY
Inventory Organization M4-NJOwner = M4-NJ
OwnershipChange
Financial Flow Physical Flow
Inventory Organization M4-NJConsigned Owner = AND-Fresno
Contingent Owner = M4-NJFinancial Flow
Physical Flow
Interfaced TransactionsCost Accounting and Receipt Accounting receive the following transaction from Oracle Fusion Inventory:
• Consignment Purchase Order (PO) #1000.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
234
• Purchase Order price USD 100.
• Ship-to organization is M3-NY which is also the contingent owner. Contingent owner assumes ownership fromthe supplier when inventory is consumed.
• Receipt and put away transactions are performed in M3-NY in consigned status.
• Goods are transferred in consigned status from M3-NY to M4-NJ.
• Ownership changes from supplier to M4-NJ through M3-NY when the goods are consumed.
Cost Accounting generates transactions for:
• Ownership changes from supplier AND-Fresno to inventory organization M3-NY and from M3-NY to M4-NJ.
• Transfer of goods from M3-NY to M4-NJ. The transfer is at cost because the organizations are within the sameprot center business unit.
AnalysisReceipt Accounting and Cost Accounting create accounting distributions for the forward and return shipment of goods.
Accounting EntriesThe following are accounting entries for the forward ow.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
235
The following diagram lists the accounting entries for the forward ow.
AND-FresnoSupplier
M4-NJOwner
Physical Flow
Ownership Change
M3-NYConsigned Owner
M4-NJConsigned Owner
Physical Flow
M3:Trade In-Transit IssueDr Interorg Receivable
Cr Trade In-Transit
M4:Transfer to Owned (Receipt)
Dr Inv Valuation MATCr Trade In-Transit
M4:Transfer to Owned Issue
Dr Consigned Inv OffsetCr Consigned Inventory
M4:Trade In-Transit Receipt
Dr Trade In-TransitCr Trade Clearing
M3:Trade Receipt AccrualDr Trade Clearing
Cr Accrual
M4:Trade Recpt AccrualDr Trade Clearing
Cr Interorg Payable
M3:Trade In-Transit RecptDr Trade In-TransitCr Trade Clearing
M3:PO ReceiptDr Consigned ClearingCr Consigned Accrual
M3:PO DeliveryDr Consigned InventoryCr Consigned Clearing
M4:Consigned Trade Receipt Accrual
Dr Consigned ClearingCr Consigned Payable
M4:In-Transit DeliveryDr Consigned InventoryCr Consigned Inspection
M4:In-Transit ReceiptDr Consigned InspectionCr Consigned In-Transit
M4:Consigned Trade In-Transit Receipt
Dr Consigned In-TransitCr Consigned Clearing
M3:Consigned Trade In-Transit Issue
Dr Consigned ReceivableCr Consigned In-Transit
M3:In-Transit ShipmentDr Consigned In-TransitCr Consigned Inventory
Legend Inv = Inventory Interorg = Interorganization MAT = Material Recpt = Receipt
The following table lists the distributions that Receipt Accounting generates under inventory organization M3-NY forthe shipment from supplier AND-Fresno to M3-NY.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
236
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
ReceiptAccounting
PO Receipt
ConsignedClearing
100
USD
PO Price
ReceiptAccounting
PO Receipt
Consigned Accrual
-100
USD
PO Price
ReceiptAccounting
PO Delivery
ConsignedInventory
100
USD
PO Price
ReceiptAccounting
PO Delivery
ConsignedClearing
-100
USD
PO Price
The following table lists the distributions generated by Cost Accounting under inventory organization M3-NY for theinterorganization transfer from M3-NY to organization M4-NJ.
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Cost Accounting
In-TransitShipment
Consigned In-Transit
100
USD
PO Price
Cost Accounting
In-TransitShipment
ConsignedInventory
-100
USD
PO Price
Cost Accounting
Consigned TradeIn-Transit Issue
ConsignedReceivable
100
USD
PO Price
Cost Accounting
Consigned TradeIn-Transit Issue
Consigned In-Transit
-100
USD
PO Price
Cost Accounting generates distributions under inventory organization M4-NJ for the interorganization transfer fromM3-NY to M4-NJ.
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Cost Accounting
Consigned TradeReceipt Accrual
ConsignedClearing
100
USD
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
237
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Cost Accounting
Consigned TradeReceipt Accrual
ConsignedPayable
-100
USD
PO Price
Cost Accounting
Consigned TradeIn-Transit Receipt
Consigned In-Transit
100
USD
PO Price
Cost Accounting
Consigned TradeIn-Transit Receipt
ConsignedClearing
-100
USD
PO Price
Cost Accounting
In-Transit Receipt
ConsignedInspection
100
USD
PO Price
Cost Accounting
In-Transit Receipt
Consigned In-Transit
-100
USD
PO Price
Cost Accounting
In-Transit Delivery
ConsignedInventory
100
USD
PO Price
Cost Accounting
In-Transit Delivery
ConsignedInspection
-100
USD
PO Price
Receipt Accounting and Cost Accounting generate distributions under inventory organization M3-NY for the change ofownership from supplier AND-Fresno to M3-NY.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Accrual
-100
USD
Not applicable
PO Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-100
USD
Material
PO Price
CostAccounting
Trade In-Transit Issue
InterorganizationReceivable
100
USD
Material
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
238
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Trade In-Transit Issue
Trade In-Transit
-100
USD
Material
PO Price
Receipt Accounting and Cost Accounting generate distributions under inventory organization M4-NJ for the change ofownership from M3-NY to M4-NJ.
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
CostAccounting
Transfer toOwned Issue
ConsignedInventoryOset
100
USD
Material
PO Price
CostAccounting
Transfer toOwned Issue
ConsignedInventory
-100
USD
Material
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
100
USD
Not applicable
Transfer Price
ReceiptAccounting
Trade ReceiptAccrual
InterorganizationPayable
-100
USD
Not applicable
Transfer Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
100
USD
Material
PO Price
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-100
USD
Material
PO Price
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
100
USD
Material
PO Price
CostAccounting
Transferto Owned(Receipt)
Trade In-Transit
-100
USD
Material
PO Price
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
239
Inventory organization M4-NJ returns goods to supplier AND-Fresno. The return of the consignment is executed in twoparts:
• An interorganization transfer from M4-NJ to M3-NY. The accounting is the same as simple purchase orderreturn transactions.
• A consignment return from M3-NY to the supplier. The accounting is the same as regular return to suppliertransactions.
Related Topics• Example of Consigned Inventory Accounting of an Interorganization Transfer Across Business Units• What are the accounting distribution basis options for consigned inventory transactions• Consigned Inventory Lifecycle• Consigned Inventory
Tax Accounting for Receipt TransactionsTo comply with tax regulations, calculate taxes and generate tax distributions for all receipt transactions. You cancapture item prices, inclusive and exclusive taxes on your purchases. Receipt costs are adjusted to account inclusivetaxes that were included in the item purchase price. Inclusive taxes are booked to a tax liability or recovery account.
You congure the tax point basis and tax point date in Oracle Fusion Financials. Based on this conguration, taxes arecalculated either on delivery or invoice generation. For more information about conguring and calculating taxes, seethe Oracle Financials Cloud Using Tax guide available on the Oracle Help Center.
Prerequisites
Congure the following to automatically calculate and account taxes. You must have the Application ImplementationConsultant role to do these tasks.
• In the Oerings work area, enable the Tax Calculation on Receipt Accounting Distributions feature at theFinancials oering level.
• Enable delivery-based tax calculation for invoices:a. In the Setup and Maintenance work area, go to the following:
• Oering: Financials• Functional Area: Transaction Tax• Task: Manage Conguration Owner Tax
b. From the Conguration Owner drop-down list, select the relevant business unit.c. From the Application Name drop-down list, select Payables.d. From the Event Class drop-down list, select Standard Invoices.e. From the Tax Point Basis drop-down list, select Invoice.f. From the Tax Point Date drop-down list, select Receipt Date.
For more information about conguring and calculating taxes, see the Oracle Financials Cloud Using Taxguide available on the Oracle Help Center.
• Congure the application to automatically calculate taxes for trade receipt accrual:a. In the Setup and Maintenance work area, go to the following:
• Oering: Manufacturing and Supply Chain Materials Management
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
240
• Functional Area: Supply Chain Financial Flows• Task: Manage Supply Chain Financial Orchestration System Options
b. Select Calculate tax for trade receipt accrual.
• Congure the application to automatically calculate and account nonrecoverable taxes on intercompanyinvoices:
a. Navigate to the Financial Orchestration work area.b. In the Tasks pane, click Manage Documentation and Accounting Rules.c. Click the required documentation and accounting rule.d. Under Required Tasks, select Intercompany Invoices.
How Taxes are Calculated and Accounted
Here's how taxes are calculated and accounted for dierent combinations of tax point basis and tax point dates:
Tax Point Basis Tax Point Date Tax Calculation Tax Accounting Variance Calculationand Accounting
Delivery
Receipt Date
Taxes are calculated ongoods receipt
Recoverable andnonrecoverable taxesare accounted ongoods receipt
Not Applicable
Invoice
Receipt Date
Taxes are calculated ongoods receipt
• Nonrecoverabletaxes areaccounted ongoods receipt
• Recoverabletaxes areaccountedon invoicegeneration
Not Applicable
Invoice
Invoice Date
Taxes are calculated oninvoice generation
Recoverable andnonrecoverable taxesare accounted oninvoice generation
Tax variance iscalculated andaccounted fordierence in the taxesestimated on purchaseorder and nal taxcalculated on invoice
Receipt Accounting receives transactions and related tax determinants from outside sources such as Oracle FusionReceiving, Inventory, and Accounts Payable. The following discusses:
• Import of tax determinants into Receipt Accounting
• Tax distributions created by Receipt Accounting
• Tax distributions by Cost Accounting
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
241
• Review of tax distributions
Receiving
Accounts PayableInventory
Transactions and Tax
Determinants
Receipt Accounting
Cost Accounting
Create Cost Accounting DistributionsCreate Receipt
Accounting Distributions and Calculate Taxes
Review Receipt Accounting Distributions
and Tax Details
Review Cost Accounting Distributions and
Inventory Valuation
Tax Calculations
Acquisition Cost Processor
Transactions
Import Tax DeterminantsHere's how you can import transactions and related tax determinants from outside sources on the Scheduled Processespage in the Scheduled Processes work area.
• Select the Transfer Transactions from Receiving to Receipt Accounting process to import receipt transactionsinto Receipt Accounting.
• Select the Transfer Costs to Cost Management process to import accounts payable transactions into ReceiptAccounting and Cost Accounting.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
242
Tax Distributions by Receipt AccountingThe Receipt Accounting Processor calls the Tax Application Programming Interface to calculate transaction taxes basedon imported tax determinants. The processor also generates tax distributions for receipt transactions.
Run the Receipt Accounting Processor on the Create Receipt Accounting Distributions page in the Receipt Accountingwork area.
Tax Distributions by Cost AccountingThe Cost Accounting Processor uses tax results generated by Receipt Accounting to calculate inventory acquisitioncosts including nonrecoverable taxes.
Run the Cost Accounting Processor on the Create Cost Accounting Distributions page in the Cost Accounting work area.
Review Tax DistributionsOn the Review Receipt Accounting Distributions page in the Receipt Accounting work area view results of the ReceiptAccounting Processor:
• Distributions and journal entries for receipt transactions
• Tax determinants accessed by clicking the links in the Tax Determinants column
• Transaction taxes accessed by clicking the Transaction Unit Cost links in the Cost Information tab
On the Review Cost Accounting Distributions page in the Cost Accounting work area view results of the Cost AccountingProcessor:
• Distributions and journal entries for inventory transactions
• Inventory unit costs including taxes in the Cost Information tab
Related Topics
• Example of Tax Accounting for a Simple Procurement Transaction
• Example of Tax Accounting for a Consigned Inventory Transaction
• Example of Tax Accounting for a Purchase Order Retroactive Price Change
• Example of Tax Accounting for Interorganization Transfers Across Business Units
• Example of Tax Accounting for Internal Drop Shipments
Example of Tax Accounting for a Simple Procurement TransactionThis example illustrates tax accounting performed by Oracle Fusion Receipt Accounting and Oracle Fusion CostAccounting for a simple procurement transaction that uses a tax point basis of delivery, that is, taxes are accounted atreceipt of the goods.
ScenarioThe supplier makes a shipment to the inventory organization based on a purchase order (PO) for USD 1,000, with thefollowing tax details:
• Tax A delivery basis = 10%. Recoverable and nonrecoverable portions are both 50%
• Tax B invoice basis = 20%. Recoverable and nonrecoverable portions are both 50%
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
243
Tax Details at Receipt and InvoiceTax details at the time of receipt of goods are:
• Tax A delivery basis = 15%, which is changed from 10% estimated at the time of purchase order. Recoverableand nonrecoverable portions are both 50%, which is equal to USD 75 (that is, USD 1,000 * 15% * 50%).
• Tax B invoice basis = 25%, which is changed from 20% estimated at the time of PO. Recoverable andnonrecoverable portions are both 50%, which is equal to USD 125 (that is, USD 1,000 * 25% * 50%).
Tax details at the time of invoice are:
• Tax A delivery basis = 20%, which is changed from 15% reported and accounted on receipt. Recoverable andnonrecoverable portions are both 50%, however taxes are not recalculated because this transaction uses a taxpoint basis of delivery.
• Tax B invoice basis = 30%, which is changed from 25% estimated on receipt. Recoverable and nonrecoverableportions are both 50%, which is equal to USD 150.
AnalysisReceipt Accounting and Cost Accounting create accounting distributions when the goods are received and when theinvoice is accounted.
Tax Accounting EntriesReceipt Accounting and Cost Accounting generate the following accounting entries at the time of receipt:
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
PO Receipt
ReceivingInspection
1,000
USD
Material
PO Price
ReceiptAccounting
PO Receipt
ReceivingInspection
75
USD
Tax
Tax A Delivery-BasedNonrecoverable:USD 1,000 *15% * 50%
ReceiptAccounting
PO Receipt
TaxRecoverable
75
USD
Tax
Tax A Delivery-BasedRecoverable:USD 1,000 *15% * 50%
ReceiptAccounting
PO Receipt
ReceivingInspection
125
USD
Tax
Tax B Invoice-BasedNonrecoverable:USD 1,000 *25% * 50%
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
244
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
PO Receipt
SupplierAccrual
-1,275
USD
Not applicable
Not applicable
CostAccounting
PO Delivery
InventoryValuation
1,200*
USD
Not applicable
Not applicable
CostAccounting
PO Delivery
ReceivingInspection
-1,200*
USD
Not applicable
Not applicable
*PO price plus nonrecoverable taxes A and B.
Accounts Payable generates the following accounting entries for the supplier when invoice is created:
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
AccountsPayable
Invoice
SupplierAccrual
1,275
USD
Not applicable
Not applicable
AccountsPayable
Invoice
TaxRecoverable
150
USD
Tax
Tax B Invoice-BasedRecoverable:USD 1,000 *30% * 50%
AccountsPayable
Invoice
Tax B RateVariance*
25
USD
Not applicable
Dierencebetween taxestimated at25% and actualcalculated at30%
AccountsPayable
Invoice
SupplierLiability
-1,450
USD
Not applicable
Not applicable
*Tax variance due to the dierence between rates at time of delivery versus invoice.
Receipt Accounting and Cost Accounting generate the following accounting entries when invoice is accounted:
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
245
Subledger Event Type Accounting Line Type Amount in FunctionalCurrency +Dr/-Cr
Functional Currency
Receipt Accounting
Invoice Price
Receiving Inspection
25
USD
Receipt Accounting
Invoice PriceAdjustment
Tax B Rate Variance*
-25
USD
Cost Accounting
Acquisition CostAdjustment
Inventory Valuation**
25
USD
Cost Accounting
Acquisition CostAdjustment
Receiving Inspection
-25
USD
*Tax variance due to the dierence between tax rates at time of delivery versus invoice.
**Inventory acquisition cost adjustment for nonrecoverable tax B.
Related Topics• Tax Accounting for Receipt Transactions• What's a tax point basis• What's a tax point date• When are nonrecoverable taxes calculated on Intercompany transactions
Example of Tax Accounting for a Consigned Inventory TransactionThis example illustrates tax accounting performed by Oracle Fusion Receipt Accounting and Oracle Fusion CostAccounting for a consigned inventory transaction in the supply chain. This transaction uses a tax point basis of delivery,that is, taxes are accounted at receipt of the goods.
ScenarioThe supplier makes a consigned shipment to the inventory organization based on a consigned purchase order (PO) forUSD 1,000 with the following tax details:
• Tax A delivery basis = 10%. Recoverable and nonrecoverable portions are both 50%
• Tax B invoice basis = 20%. Recoverable and nonrecoverable portions are both 50%
Tax Details at Receipt and InvoiceTax details at the consigned receipt of goods are:
• Item value = USD 1,000
• Tax A delivery basis = 15%, which is changed from 10% estimated at the time of PO. Recoverable andnonrecoverable portions are both 50%, or USD 75, that is, USD 1,000 * 15% * 50%.
• Tax B invoice basis = 25%, which is changed from 20% estimated at the time of PO. Recoverable andnonrecoverable portions are both 50%, or USD 125, that is, USD 1,000 * 25% * 50%.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
246
Tax details at the time of invoice are:
• Item value = USD 1,000
• Tax A delivery basis = 20%. Recoverable and nonrecoverable portions are both both 50%, however taxes arenot recalculated because this transaction uses a tax point basis of delivery.
• Tax B invoice basis = 30%, which is changed from 25% estimated at the time of receipt. Recoverable andnonrecoverable portions are both 50%, or USD 150.
AnalysisReceipt Accounting and Cost Accounting create accounting distributions when the consigned good are received, whenthe status changes from consigned to owned, and when the invoice is accounted.
Tax Accounting EntriesReceipt Accounting and Cost Accounting generate the following accounting entries at the time of receipt of consignedgoods:
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Consigned POReceipt
ConsignedClearing
1,000
USD
Material
PO Price
ReceiptAccounting
Consigned POReceipt
ConsignedClearing
75
USD
Tax
Tax A Delivery-BasedNonrecoverable:USD 1,000 *15% * 50%
ReceiptAccounting
Consigned POReceipt
ConsignedClearing
125
USD
Tax
Tax B Invoice-BasedNonrecoverable:USD 1,000 *25% * 50%
ReceiptAccounting
Consigned POReceipt
ConsignedAccrual
-1,200
USD
Not applicable
Not applicable
CostAccounting
Consigned PODelivery
ConsignedInventory*
1,200
USD
Not applicable
Not applicable
ReceiptAccounting
Consigned PODelivery
ConsignedClearing
-1,200
USD
Not applicable
Not applicable
*PO price plus nonrecoverable taxes A and B.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
247
Receipt Accounting and Cost Accounting generate the following accounting entries at the time of change of status fromconsigned to owned stock:
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedAccrual
1,000
USD
Material
PO Price
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedAccrual
75
USD
Not applicable
Tax A Delivery-BasedNonrecoverable:USD 1,000 *15% * 50%
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedAccrual
125
USD
Not applicable
Tax B Invoice-BasedNonrecoverable:USD 1,000 *15% * 50%
ReceiptAccounting
ConsignedReceiptConsumption
ConsignedClearing
-1,200
USD
Not applicable
Not applicable
CostAccounting
Transfer toOwned Issue
ConsignedInventoryOset
1,000
USD
Material
PO Price
CostAccounting
Transfer toOwned Issue
ConsignedInventoryOset
75
USD
NonrecoverableTax
Tax A Delivery-BasedNonrecoverable
CostAccounting
Transfer toOwned Issue
ConsignedInventoryOset
125
USD
NonrecoverableTax
Tax B Invoice-BasedNonrecoverable
CostAccounting
Transfer toOwned Issue
ConsignedInventory
-1,200
USD
Not applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
1,000
USD
Not applicable
PO Price
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
75
USD
Not applicable
Tax A Delivery-BasedNonrecoverable
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
248
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
Trade ReceiptAccrual
Trade Clearing
125
USD
Not applicable
Tax B Invoice-BasedNonrecoverable
ReceiptAccounting
Trade ReceiptAccrual
TaxRecoverable*
75
USD
Not applicable
Tax A Delivery-BasedRecoverable
ReceiptAccounting
Trade ReceiptAccrual
SupplierAccrual
-1,275
USD
Not applicable
Not applicable
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
1,000
USD
Not applicable
PO Price
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
75
USD
Not applicable
Tax A Delivery-BasedNonrecoverable
CostAccounting
Trade In-Transit Receipt
Trade In-Transit
125
USD
Not applicable
Tax B Invoice-BasedNonrecoverable
CostAccounting
Trade In-Transit Receipt
Trade Clearing
-1,200
USD
Not applicable
Not applicable
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
1,000
USD
Material
PO Price
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
75
USD
NonrecoverableTax
Tax A Delivery-BasedNonrecoverable
CostAccounting
Transferto Owned(Receipt)
InventoryValuation
125
USD
NonrecoverableTax
Tax B Invoice-BasedNonrecoverable
CostAccounting
Transferto Owned(Receipt)
Trade In-Transit
-1,200
USD
Not applicable
Not applicable
*Delivery-based recoverable tax A is calculated on consigned receipt but will be accounted after ownership changeevent.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
249
Accounts Payable generates the following accounting entries when the invoice is created:
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Accounts Payable
Invoice
Supplier Accrual
1,275
USD
Not applicable
Accounts Payable
Invoice
Tax B Recovery
150
USD
Tax B Invoice-Based Recoverable
Accounts Payable
Invoice
Tax B RateVariance*
25
USD
Not applicable
Accounts payable
Invoice
Supplier Liability
-1,450
USD
Not applicable
*Tax variance due to the dierence between tax rates at time of delivery versus invoice.
Receipt Accounting and Cost Accounting generate the following accounting entries when invoice is accounted:
Subledger Event Type Accounting Line Type Amount in FunctionalCurrency +Dr/-Cr
Functional Currency
Receipt Accounting
Invoice PriceAdjustment
Trade Clearing
25
USD
Receipt Accounting
Invoice PriceAdjustment
Tax B Rate Variance*
-25
USD
Cost Accounting
Acquisition CostAdjustment
Inventory Valuation**
25
USD
Cost Accounting
Acquisition CostAdjustment
Trade Clearing
-25
USD
*Tax variance due to the dierence between tax rates at time of delivery versus invoice.
**Inventory acquisition cost adjustment for nonrecoverable tax B.
Related Topics
• Tax Accounting for Receipt Transactions
• What's a tax point basis
• What's a tax point date
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
250
Example of Tax Accounting for a Purchase Order Retroactive PriceChangeThis example illustrates tax accounting performed by Oracle Fusion Receipt Accounting and Oracle Fusion CostAccounting for a retroactive price change on a purchase order (PO) receipt that is partially invoiced.
ScenarioThe supplier makes a shipment to the inventory organization based on a purchase order for 10 units, at a per unit priceof USD 100. After receipt of the goods, a partial invoice is created for 2 units at USD 100 per unit.
The purchase order price changes retroactively from USD 100 to USD 120. The remaining balance of 8 units is invoicedat USD 120 per unit.
Tax DetailsThis transaction uses a tax point basis of delivery, that is, taxes are accounted at the time of receipt of goods.
Taxes details are the same after the retroactive price change on the PO:
• Tax A delivery basis = 20%. Recoverable and nonrecoverable portions are both 50%.
• Tax B invoice basis = 30%. Recoverable and nonrecoverable portions are both 50%.
AnalysisReceipt Accounting and Cost Accounting create accounting distributions at the time of receipt of goods, after theretroactive purchase order price change, and for the dierential invoice.
Tax Accounting EntriesReceipt Accounting and Cost Accounting generate the following accounting entries at the time of receipt of goods:
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
PO Receipt
ReceivingInspection
1,000
USD
Material
PO Price
ReceiptAccounting
PO Receipt
ReceivingInspection
100
USD
Tax
Tax A Delivery-BasedNonrecoverable:USD 1,000 *20% * 50%
ReceiptAccounting
PO Receipt
TaxRecoverable(Tax A)
100
USD
Tax
Tax A Delivery-BasedRecoverable:USD 1,000 *20% * 50%
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
251
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
PO Receipt
ReceivingInspection
150
USD
Tax
Tax B Invoice-BasedNonrecoverable:USD 1,000 *30% * 50%
ReceiptAccounting
PO Receipt
SupplierAccrual
-1,350
USD
Material
Not applicable
CostAccounting
PO Delivery
InventoryValuation
1,250*
USD
Not applicable
Not applicable
CostAccounting
PO Delivery
ReceivingInspection
-1,250*
USD
Not applicable
Not applicable
*PO price plus nonrecoverable taxes A and B.
Accounts Payable generates the following accounting entries for the supplier when partial invoice is accounted:
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
AccountsPayable
Invoice
SupplierAccrual
270*
USD
Not applicable
Item Price plusNonrecoverableTaxes A andB for 2 units =USD 1,350/10* 2
AccountsPayable
Invoice
TaxRecoverable
30
USD
Tax
Tax B Invoice-BasedRecoverable:USD 200 * 30%* 50%
AccountsPayable
Invoice
SupplierLiability
-300
USD
Not applicable
Not applicable
*Accrual is debited to the extent quantity is invoiced, which is 2 units.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
252
Receipt Accounting and Cost Accounting generate the following accounting entries after the retroactive purchase orderprice change:
Subledger Event Type AccountingLine Type
Amount inFunctionalCurrency+Dr/-Cr
FunctionalCurrency
Cost Element Basis ofAmount
ReceiptAccounting
RetroactivePriceAdjustment
ReceivingInspection
160*
USD
Material
USD 120 -USD 100 *uninvoicedquantity of 8units
ReceiptAccounting
RetroactivePriceAdjustment
ReceivingInspection
16
USD
Tax
Tax A Delivery-BasedNonrecoverable:USD 160 * 20%* 50%
ReceiptAccounting
RetroactivePriceAdjustment
TaxRecoverable(Tax A)
16
USD
Tax
Tax A Delivery-BasedRecoverable:USD 160 * 20%* 50%
ReceiptAccounting
RetroactivePriceAdjustment
ReceivingInspection
24
USD
Tax
Tax B Invoice-BasedNonrecoverable:USD 160 * 20%* 50%
ReceiptAccounting
RetroactivePriceAdjustment
SupplierAccrual
-216
USD
Material
Not applicable
CostAccounting
AcquisitionCostAdjustment
InventoryValuation
200**
USD
Not applicable
Not applicable
CostAccounting
AcquisitionCostAdjustment
ReceivingInspection
-200
USD
Not applicable
Not applicable
*Retroactive price adjustment accounted only for the uninvoiced quantity, that is, 10 units received minus 2 unitsinvoiced = 8 units uninvoiced.
** Retroactive PO price change plus nonrecoverable taxes A and B.
Accounts Payable generates the following accounting entries for the balance of 8 units:
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
253
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Accounts Payable
Invoice
Supplier Accrual
960
USD
Item Price USD 120* 8
Accounts Payable
Invoice
Supplier Accrual
96
USD
Tax A Delivery-BasedNonrecoverable:USD 120 * 8 * 20%* 50%
Accounts Payable
Invoice
Supplier Accrual
96
USD
Tax A Delivery-BasedRecoverable: USD120 * 8 * 20% *50%
Accounts Payable
Invoice
Supplier Accrual
144
USD
Tax B Invoice-BasedNonrecoverable:USD 120 * 8 * 30%* 50%
Accounts Payable
Invoice
Recoverable Tax B
144
USD
Tax B Invoice-BasedRecoverable: USD120 * 8 * 30% *50%
Accounts Payable
Invoice
Supplier Liability
-1,440
USD
Not applicable
Accounts Payable generates the following accounting entries for the original invoice quantity of 2 units at the revisedPO price:
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Accounts Payable
Invoice
Invoice PriceVariance
40
USD
Dierence in POItem Price USD 20* 2
Accounts Payable
Invoice
Tax Invoice PriceVariance Tax A
4
USD
Tax A Delivery-BasedNonrecoverable
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
254
Subledger Event Type Accounting LineType
Amount inFunctionalCurrency +Dr/-Cr
FunctionalCurrency
Basis of Amount
Accounts Payable
Invoice
Tax Invoice PriceVariance Tax B
6
USD
Tax B Invoice-BasedNonrecoverable
Accounts Payable
Invoice
Recoverable Tax A
4
USD
Tax A Delivery-Based Recoverable
Accounts Payable
Invoice
Recoverable Tax B
6
USD
Tax B Invoice-Based Recoverable
Accounts Payable
Invoice
Supplier Liability
-60
USD
Not applicable
Cost Accounting and Receipt Accounting generate the following accounting entries for the dierential invoice:
Subledger Event Type Accounting Line Type Amount in FunctionalCurrency +Dr/-Cr
Functional Currency
Receipt Accounting
Invoice PriceAdjustment
Receiving Inspection
50
USD
Receipt Accounting
Invoice PriceAdjustment
Invoice PriceAdjustment
-40
USD
Receipt Accounting
Invoice PriceAdjustment
Tax Invoice PriceAdjustment
-10*
USD
Cost Accounting
Acquisition CostAdjustment
Inventory Valuation
50**
USD
Cost Accounting
Acquisition CostAdjustment
Receiving Inspection
-50
USD
*Nonrecoverable taxes A and B on the dierential invoice price.
**Dierence between invoice price and nonrecoverable taxes A and B.
Related Topics
• Tax Accounting for Receipt Transactions
• What's a tax point basis
• What's a tax point date
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
255
Oracle Project Portfolio Management Cloud IntegrationOracle Project Portfolio Management (PPM) Cloud oers an integrated project management suite that is designed toautomate, streamline, and control project nancial and project execution management processes end-to-end.
You can view PPM integration aributes on the Review Cost Accounting Distributions page. The following are examplesof the project aributes that are captured:
• Project name
• Task name
• Expenditure type
• Expenditure item date
• Expenditure organization
Capture Expenditure Information in Project Costing for InventoryShipments of MaterialYou can capture expenditure information in Project Costing for shipments of material from Inventory. You will continueto bill your customers from Project Portfolio Management Cloud (Project Billing). The Sales Order Issue Inventorytransaction is processed and accounted in Costing. The accounting line type Project Clearing is used for sending thecost details to the Project Costing system, where the project is charged for the items shipped.
The following accounting distributions are created for Sales Order Issue and Project Costing integration.
Event Type Accounting Line Type Transaction Type
Sales Order Issue
Project Clearing
Debit
Sales Order Issue
Inventory
Credit
Capture Expenditure Information in Project Costing from an ExpenseDestination Transfer OrderYou can capture project aributes on expense destination transfer orders, and fulll these transfer orders from acommon or pooled inventory to track costs against a project. You can capture expenditure information for shipmentof material from inventory to a project location. You can view project details associated with the transfer order on theReview Cost Accounting Distributions page. The following are examples of the accounting distributions created fortransfer order and Project Costing integration.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
256
Event Type Accounting Line Type Transaction Type
Transfer Order Deliver to Expense
Inventory
Debit
Transfer Order Deliver to Expense
Trade in Transit
Credit
Overview of Reports and Analytics for Cost AccountingYou can use the Reports and Analytics work area to access predened reports and analytics that are related to your role,and to modify existing reports and analytics.
The following list includes some of the reports that are available for Cost Accounting.
• Costing Account Balances Report
• COGS and Revenue Matching Report
• Gross Margin Report
• In-Transit Valuation Report
• Inventory Valuation Report
• Layer Inventory Valuation Report
• Work in Process Inventory Valuation Report
The following list includes some of the real time analytics available for Cost Planning.
• Costed Bill of Materials
• Costed Bill of Materials with Cost Element
• Cost Scenario Exceptions
• Cost Comparison
• Where Used Analysis for Components and Resources
The following list includes some of the real time analytics available for Cost Accounting.
• Cost Accounting Real Time
• COGS and Gross Margin Real Time
• Inventory Valuation Real Time
• Item Cost Real Time
• Work Order Costs Real Time
• Cost Accounting Period Close Real Time
• Resource Rates Real Time
• Overhead Rates Real Time
• Landed Costs Real Time
For more information on accessing and modifying reports and analytics, refer to the guide Creating and AdministeringAnalytics and Reports.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
257
For descriptions of the reports and analyses, and information on accessing them, see the topic Oracle Supply ChainManagement Cloud: View Supply Chain Management Reports and Analyses.
Related Topics• Overview of Creation and Administration of SCM Analytics and Reports• Oracle Supply Chain Management Cloud: View Supply Chain Management Reports and Analyses• Reports and Analytics Work Area and Panel Tab• Business Intelligence Catalog• SCM Subject Areas in Oracle Transactional Business Intelligence
Analyze Inventory ValuationYou can set up costs iteratively in Cost Accounting, and check the impact on inventory valuation on the ReviewInventory Valuation page. You can view the inventory value details at cost organization level, cost book level, or for aparticular date.
To analyze inventory valuation, complete the following steps.
1. From the Navigator menu, select Cost Accounting.2. From the Tasks panel, select Review Inventory Valuation.3. Query the inventory valuation by Cost Organization, Cost Book, or Valuation Date. The inventory valuation
information includes the elds described in the following table.
Field Description
Costed Value
Inventory value in Cost Accounting at the valuation unit level.
Unaccounted Value
Value of transactions with no journal entries in the subledger.
Related Topics• How Cost Organizations, Inventory Organizations, and Cost Books Fit Together• Example of Accounting of Global Procurement Trade Transactions into Inventory
FAQs for Cost Accounting
When should I run the Period End Validation report for CostAccounting?You should run the Period End Validation report for Cost Accounting and Receipt Accounting at regular intervals, andwell in advance of period close, so that any errors and exceptions in the reports can be resolved before period close. Youcan access these reports in the Reports and Analytics work area.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
258
What happens if an item in a cost organization book has botha perpetual average item cost adjustment and a receipt costadjustment pending?The perpetual average item cost adjustment is always processed after the receipt cost adjustment, regardless of theorder in which you create the adjustments.
What happens if the cost processors are running transactionsfor several cost organization books involving interorganizationtransfers?The cost processor can run the transactions for several cost organization books concurrently and iteratively, until alldependencies caused by interorganization transfers are resolved.
For example, assume that there is an interorganization transfer from cost organization book B to cost organization bookA. The cost processor runs the transactions for cost organization book B rst, and cost organization book A second.This process is reiterated until all interorganization transfers are accounted for.
How can I post cost distributions and journal entries to the generalledger?First run the cost distribution processor to generate distributions for inventory transactions on the Create CostAccounting Distributions page. Then create the related subledger journal entries on the Create Entries for CostAccounting page.
Execute these processes one at a time, or set them up to execute automatically on a prescheduled basis.
What happens during cost processing when an inventoryorganization is missing setup information?If the setup information is incomplete for an inventory organization that is directly tied to the cost organization in theprocess run, the missing information is agged as an error on the Review Cost Accounting Processes page, and theprocess fails.
If the setup information is incomplete for an inventory organization that is not directly tied to the cost organization inthe process run, the missing information is agged as a warning, but the process is completed.
Examples of setup information that may be missing are the association of the inventory organization with a costorganization, the assignment of a cost book to the cost organization, the assignment of a cost prole to the item, or theassignment of a valuation unit to the cost organization.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
259
How can I diagnose problems with item cost data that is missingor incorrect?After interfacing the inventory transaction data, you can run the Item Cost Data Collection Test from the Help >Supportability menu.
What are the accounting distribution basis options for consignedinventory transactions?You can perform cost accounting of consigned inventory transactions using zero value or actual cost. Typically, thevaluation on the balance sheet for supplier-owned consigned inventory is zero. But you may sometimes want toperform accounting using actual cost. In either case, the inventory valuation reports always display the pro forma valueof consigned goods.
Select the accounting distribution basis for consigned inventory on the Manage Cost Proles page in the Setup andMaintenance work area.
Can I revise a cost adjustment?You can modify a cost adjustment that has not yet been processed by the cost processor. If you need to make changesafter a cost adjustment has been processed, you can create another adjustment for the additional changes.
What's a tax point basis?A point in the receipt transaction process where taxes are accounted and reported to the tax authorities. These can beclassied into two categories: delivery-based and invoice-based tax points.
Delivery-based taxes are accounted and reported on the receipt transaction. Invoice-based taxes are accounted andreported when the supplier invoice is created, accounted, or paid.
What's the dierence between inclusive basis and exclusive basisin tax calculations?Inclusive taxes are included in the assessable value or purchase price. For example:
• PO amount: USD 100
• Inclusive tax rate: 10%
• Tax: 100/1.10 = USD 9.09 (distribution amount divided by (1 + tax rate))
Exclusive taxes are added to the purchase price or assessable value. For example:
• PO amount: USD 100
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 4Cost Accounting
260
• Exclusive tax rate: 10%
• Tax: 100*0.10 = USD 10.00 (distribution amount multiplied by tax rate)
Is the accounting date of a transaction always the same as thecosting date?The accounting date of a transaction is generally the same as the costing date, but there may be exceptions; forexample, if the costing period is already closed, then the distribution processor sets the accounting date to the nextopen period.The accounting transaction is submied to the general ledger application through the subledger accounting application.If the general ledger period for the accounting date is closed when the accounting transaction is submied, then thetransaction is rejected and returned with an error. The cost processor then automatically proposes a new accountingdate in the next open period, and resubmits the revised accounting transaction to the general ledger through subledgeraccounting.
What cost method can I use for drop ship sales orders?You can use the Standard and Actual cost methods for drop ship sales orders.
How does cost accounting handle the input costs for amaintenance work order?Material and resource costs are accounted for as an expense as they are incurred. The expense account rules formaintenance work order costs are dened using the work order type, subtype, and the maintenance expenseaccounting class.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 5Landed Cost Management
261
5 Landed Cost Management
Overview of Landed Cost ManagementOracle Fusion Landed Cost Management gives your organization nancial visibility into your supply chain costs,including transportation and handling fees, insurance, duties, and taxes. These types of charges can compose asignicant portion of the cost of an item. Landed Cost Management enables you to incorporate the charges accuratelyinto overall nancial processes and decision-making activities. Landed Cost Management initially estimates thesecosts and later updates them with actual amounts as they become known, allocating them to shipments, orders, andproducts. This enables you to maximize prots, improve visibility into outstanding liabilities, enhance competitiveness,and ensure that complex trade activities are compliant with regulatory mandates.Landed Cost Management performs three main tasks:
• Capture Charges: Landed Cost Management provides the capability to capture charges such as freight,insurance, and so on. These charges are captured and grouped under an entity called trade operation. A tradeoperation is a logical entity that denotes a single instance of a business transaction or process in which youwould like to capture all the charges. An example of this is a single shipment or container.
• Perform Allocations: Material PO schedules are associated to charges. This denotes the PO schedules thatare part of the trade operation or that are impacted by this trade operation. After the PO schedules arereferenced to charges on the trade operation, the charge amount is distributed and allocated to the respectivePO schedules and further on to the receipts that are performed on those schedules.
• Create Accounting: The nal step is to account for all the charges that were incurred. This is done bytransferring all the charge information to Receipt Accounting and Cost Accounting.
Landed Cost Management interfaces with the following applications:
• Oracle Fusion Purchasing: Landed Cost Management receives the material purchase order (PO) information.The trade operation charges are associated with the PO schedules and allocated proportionately to the POschedules and receipts.
• Oracle Fusion Receipt Accounting: Tasks performed when managing landed costs use data from ReceiptAccounting, and Receipt Accounting will create the accounting entries to accrue landed cost charges.
• Oracle Fusion Cost Management: Charges from Landed Cost Management are absorbed as part of the itemcost in Cost Management. After the goods are delivered to inventory, the landed cost charges are absorbed intoinventory valuation.
• Oracle Fusion Tax: Taxes may be applicable on the charges coming from Landed Cost Management. Thecharges are dened in Landed Cost Management. Taxes are automatically calculated, when applicable, bycalling the Tax application.
• Oracle Fusion Payables: In most cases, suppliers send invoices for the services they provide (particularly forfreight). When these invoices relate to charges dened in a landed cost Trade Operation, it is possible toautomatically associate an invoice amount to a landed cost charge applied to a receipt. For example, when areceipt of items is performed, the bill of lading number from the freight supplier is specied in the receipt. Thenwhen the freight supplier invoice is processed, the invoice line references that bill of lading number. When thefreight supplier invoice is interfaced to the landed cost application, the bill of lading number that is common tothe receipt and invoice lines is automatically associated. As a result, the landed cost application compares theestimated amount of freight charge in the receipt to the actual amount of freight charge billed in the invoice,and adjusts the cost of the receipt for any calculated cost variance.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 5Landed Cost Management
262
Implementing Oracle Fusion Receipt Accounting is a prerequisite for Landed Cost Management. Implementing OracleFusion Cost Accounting is optional. If you implement Cost Accounting, the landed cost charges are also visible in CostAccounting. Several options are available for implementing Landed Cost Management, based on the source of theselanded cost charges. You can implement a combination of one or more of these options where the source of the landedcost charges can be:
• A payable invoice from a service provider or supplier
• A supplier purchase order for the service
• An estimate provided by a supplier or any other source
Landed Cost Management TasksThe following table describes the tasks and processes to support landed cost management. You can access these tasksand processes in the Receipt Accounting work area.
Task Description
Manage Trade Operations
Create and edit trade operations to capture landed cost charges associated with purchaseorder receipts of material.
Review Purchase Orders for LandedCost
View material purchase orders from Purchasing and associated charges, and create tradeoperations for the purchase orders.
Manage Charge Invoice Associations
View invoices that are automatically associated with trade operation charge lines, identify andcorrect mismatched invoices, create trade operations, and associate them with invoices.
Manage Landed Cost Processes
Schedule the processes to associate and allocate third-party charges to trade operations.
Review Landed Cost Processes
Review landed cost processing details, parameters, and errors.
Manage Trade Operation Templates
Create and edit templates of trade operations and the associated charges.
Reconcile Landed Cost Charges
View PO schedules and receipts where the related third-party charges are over or under-allocated and absorbed, and run the process to adjust the discrepancies.
View Item Landed Cost
Review purchase order receipts of goods, related third-party charges, total landed costs, andthe variances between estimated and actual landed costs.
Analyze Landed Cost Charges
Compare and evaluate landed cost trends, including material costs and third-party charges,across business units, inventory organizations, and routes.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 5Landed Cost Management
263
Trade OperationsCreate trade operations to capture landed cost charges associated with purchase order receipts of material. A tradeoperation is an entity that is used to group landed cost charges expected to be incurred for material shipments. You cancreate a trade operation for an upcoming shipment to capture the landed cost charges incurred for that shipment. Youcan also create the trade operation after the actual shipment. Trade operations are created in the Landed Costs workarea on the Manage Trade Operations page.
Create a Trade Operation Template to pre-populate the main elds in Trade Operations for repeat purchases.Templates dene the structure for the trade operation, such as charges, reference types, routes, currency, and taxes.Both inclusive and exclusive taxes are supported for landed costs.
To create a trade operation, perform the following steps.
1. From the Navigator menu, select Receipt Accounting.2. From the Landed Costs task list, select Manage Trade Operations.3. Click Create Trade Operation and complete the required elds. The elds are described in the following table.
Field Description
Charge BU
The requisitioning business unit for the charge.
Charge Basis The level where the charge is captured. The charge basis options are as follows:
• Aggregate. If the charge is the total amount, use Allocation Basis to specify allocation.• Per Unit. Fixed rate per unit of items. The charge is entered in the Rate eld.• Percentage of Item Price. A percentage of the full item price. The charge is entered in
the Rate eld.• Percentage of Other Charges. Percentage of another charge in the Trade Operation.
This is a good way to model tax applying to another charge. The charge is entered onthe Related Charges lines as follows:
-Item Value of the source charge
-Percentage of charge amount• Variable Per Unit. Similar to Per Unit but specied against a specic purchase order line
schedule. There may be dierent rates in a charge for dierent schedules. The Rate isdened directly at the purchase order schedule level associated with the charge line.
• Variable Percentage of Item Price. Similar to Percentage of Item Price but speciedagainst a specic purchase order line schedule. There may be dierent percentagesin a charge for dierent schedules. The Rate is dened directly at the purchase orderschedule level associated with the charge line.
Allocation Basis The basis used to allocate the charge to purchase order schedules. The allocation basis options
are as follows:
• Equally. The aggregate charge value is allocated equally across purchase orderschedules associated with a charge line.
• Quantity. The aggregate charge value is allocated in the ratio of quantities present oneach of the purchase order schedules.
• Volume. The aggregate charge value is allocated in the ratio of volumes (represented interms of the Base UOM) present on each of the purchase order schedules.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 5Landed Cost Management
264
Field Description
• Weight. The aggregate charge value is allocated in the ratio of weights (represented interms of the Base UOM) present on each of the purchase order schedules.
• Item Value. The aggregate charge is allocated in the ratio of item value (purchase orderprice multiplied by quantity) present on purchase order schedules.
• Manual Allocation Factor. The aggregate charge is allocated to the purchase orderschedules based on the manual factor provided by the user at purchase order schedulelevel on the charge line.
Value
Identication of associated charge reference, such as bill of lading.
Landed Cost ChargesA trade operation charge is an estimated or actual landed cost charge for allocation to purchase order schedules, andsubsequently to receipts. Landed cost charges are additional material supplier charges and third party charges thatare incurred in the process of receiving material into ownership or possession. The details regarding the allocation ofcharges are captured in the charge line Status eld. The charge line Status values are described in the following table.
Charge Line Status Description
New
This is the initial status assigned to a new charge line.
Pending PO Schedule Association
The charge line has been successfully saved, but no purchase order schedules have beenassociated with the charge.
Ready for Allocation The charge line has been successfully saved and the following conditions have been met:
• The purchase order schedules have been associated with the charge line.• Any applicable per unit and percentage values have been entered in the Rate eld.
A warning message will be displayed if the applicable per unit and percentage values have notbeen entered on a charge line.
Trade Operation TemplatesYou can create a trade operation from a trade operation template to streamline the process. Trade operation templatescan be used for repeat purchases. Create a template if you need to create a similar trade operation multiple times.This helps to ensure consistency. Trade operation templates contain information about the supplier, charge lines,reference types, routes, and other related information. Whenever a trade operation is created by using a template,all this information is copied to the trade operation. The user can modify the copied information where required.Trade operation templates are managed in the Landed Cost Management work area on the Manage Trade OperationTemplates page.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 5Landed Cost Management
265
Create Estimate Landed CostsYou can use a Trade Operation to simulate and estimate landed cost charges associated with purchase order receiptsof material. You can create a trade operation for an upcoming shipment to capture the landed cost charges incurred forthat shipment. The landed cost features provide nancial visibility into the supply chain costs, including transportationand handling fees, insurance, duties, and taxes. A signicant portion of an item's cost can be comprised of landed costs,and it's important to accurately incorporate them into nancial processes and decision making. Trade operations arecreated in the Landed Costs work area on the Manage Trade Operations page. You can associate a purchase order to aTrade Operation based on various identiers, including purchase order number or advance shipment notice (ASN).
To create estimate landed costs, complete the following steps.
1. From the Navigator menu, select Receipt Accounting.2. From the Tasks panel, select Manage Landed Cost Processes.3. Query for and run the process Prepare Material Purchase Order Data. This process updates the list of approved
purchase orders that can be selected for landed costs.4. From the Tasks panel, select Manage Trade Operation Templates.5. Search for the required template and click the Create from Template buon. Enter the Trade Operation Name
and save the Trade Operation.6. (Optional). Enable the Tentative option for any charge lines that you don't want to be included in receipt
accounting distributions. This option is only applicable for estimate costs.7. Click on the Associate Default Material Purchase Orders buon.8. Click on the Select and Add buon and search for and select the required purchase order. You can associate
a purchase order to a Trade Operation based on various identiers, including the Purchase Order number orthe Shipment Number (ASN). This associates all of the Trade Operation charges to the material Purchase Orderspecied in the Trade Operation header.
9. Click Save. When the application has associated the purchase order to the Trade Operation charge lines, theCharge Line Status displays a Ready for Allocation message when you hover over it.
10. Click on a charge. The Charge Details area of the page shows the purchase order line schedules associated withthe charge.
11. From the Actions menu in the Trade Operation header, select Allocate Charges. The Charge line status isautomatically updated, and the message Successfully Allocated is displayed when you hover over the icon. Thetotal amount of each charge is displayed in the Landed Cost Charges area. This is the estimated charge amountthat's anticipated to be applied when the items in a Purchase Order are fully received.
12. From the Actions menu in the Trade Operation header, select Update Status.13. Set the Trade Operation status to Open. This informs Receipt Accounting that the charges in this Trade
Operation are to be added to the material cost of the items received against the Purchase Orders referenced inthe Trade Operation. Create and submit the receipt in the Receiving application.
14. From the Navigator menu, select Tools, then Scheduled Processes, then run the Transfer Transactions fromReceiving to Costing process.
15. In the Landed Costs work area navigate to the Manage Landed Cost Processes page from the Tasks menu.Select the Allocate Landed Cost Charges process and set the Apply Charges to Receipts option to Yes in theDene Parameters region. Submit the process.
16. (Optional). From the Navigator menu, select Receipt Accounting. From the Tasks menu select Create ReceiptAccounting Distributions.
17. Select View Item Landed Cost from the Tasks menu. Select the PO number and receipt. The item landed costsdisplayed include the material and landed cost charges.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 5Landed Cost Management
266
Note: To create a charge from a service PO, you must select charge basis as Aggregate and select Service PO.The PO Number lists only the Fixed Price Services type of POs. Specify the PO Number, Service PO Number,and Service PO Schedule. After creating the charge from a service PO, the charge line is automaticallyassociated with the invoice line without the need for charge references, because the PO number becomes thereference for charge association.
How You Enable an Invoice for Landed Cost ProcessingReference Types are used for automatically matching the landed cost charge invoices to the trade operation charges.These are typically the document names that would be used in the business process, and are visible both on the Invoiceand in landed cost management, for example, Bill of lading or Shipment number.
Invoices are designated for landed cost processing in the Payables work area. To designate an invoice line as a landedcost, enable the Landed Cost option in the Invoice lines section on the Create or Edit Invoice pages. You can then enterthe charge details on the Charge References dialog box. After the invoice lines are accounted, submit the TransferCosts to Cost Management process to transfer the invoice distributions form Payables to Cost Management for furtherprocessing.
Create Actual Landed CostsYou can use a Trade Operation to create landed cost charges associated with purchase order receipts of material. Youcan create a trade operation for an upcoming shipment to capture the landed cost charges incurred for that shipment.Trade operations are created in the Landed Costs work area on the Manage Trade Operations page. You can associatea purchase order to a Trade Operation based on various identiers, including purchase order number or advanceshipment notice (ASN).
To create actual landed costs, complete the following steps.
1. Navigate to the Payables work area and create an invoice. Enable an invoice line for landed cost processing byselecting the Enable option on the Landed Costs tab.
2. Select the References plus icon and add the Charge Name, Reference Type, and Reference Value. These eldswill be used to match the invoice line to the Trade Operation charge line. Save the changes.
3. Select Validate from the Invoice Actions menu. Ensure that the Validation status updates to Validated on theInvoice Summary tab.
4. Select Post to Ledger from the Invoice Actions menu. Ensure that the Accounting status updates to Accountedon the Invoice Summary tab. Save and close the invoice.
5. From the Navigator menu, select Tools, and then Scheduled Processes. Search for and select the Transfer Coststo Cost Management process and set the required parameters. The Cuto Date must be greater than or equalto Invoice creation date. Submit the process.
6. From the Navigator menu, select Receipt Accounting.7. From the Tasks panel, select Manage Trade Operations. Create a Trade Operation and complete the required
elds. Save your changes.8. Add a charge line to the Trade Operation and complete the Charge References elds. Enable the Automatically
Associate on Match option.The Charge References information will be used to automatically associate an invoice that has matchingreference data.
9. Select the Enable Automatic Tax Calculation option if you want to use the Tax application to automaticallycalculate the tax.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 5Landed Cost Management
267
10. Click on the Associate Default Material Purchase Orders buon.11. Click on the Select and Add buon and search for and select the required purchase order. You can associate
a purchase order to a Trade Operation based on various identiers, including the Purchase Order number orthe Shipment Number (ASN). This associates all of the Trade Operation charges to the material Purchase Orderspecied in the Trade Operation header.
12. Click Save. When the application has associated the purchase order to the Trade Operation charge lines, theCharge Line Status displays a Ready for Allocation message when you hover over it.
13. Click on a charge. The Charge Details area of the page shows the purchase order line schedules associated withthe charge.
14. From the Actions menu in the Trade Operation header, select Update Status, and set the status to Open.
This informs Receipt Accounting that the charges in this Trade Operation are to be added to the material costof the items received against the Purchase Orders referenced in the Trade Operation. Create and submit thereceipt in the Receiving application.
15. From the Actions menu in the Trade Operation header, select Allocate Charges. The Charge line status isupdated and displays Successfully Allocated when you hover over the icon. The total amount of each chargeis displayed in the Landed Cost Charges area. This is the estimated charge amount that is anticipated to beapplied when the items in a Purchase Order are fully received.
16. In the Landed Costs work area navigate to the Manage Landed Cost Processes page from the Tasks menu.Select and run the Prepare Invoice Data process.
17. On the Manage Landed Cost Processes page select and run the Associate Invoices to Trade Operation Chargesprocess.
18. In the Landed Costs work area navigate to the Manage Charge Invoice Associations page from the Tasks menu,and select the required invoice. Set the Association Status to All. The invoice association status is displayed inthe Association Details region, including the association aributes, charge line details, corresponding invoiceline details, and match status for each charge line.
19. In the Landed Costs work area navigate to the Manage Trade Operations page. Search for and open therequired Trade Operation for editing. The Charge Line Status will be set to Requires Reallocation.
20. Click on the Allocate Charges buon. The actual charges are added to the Trade Operation.
Charge Invoice Association StatusWhen you run the Associate Invoices to Trade Operation Charges process from the Manage Landed Cost Processespage, the Manage Charge Invoice Associations page is updated. The details regarding charge invoice associations arecaptured in the Association Status eld. The Association Status values are described in the following table.
Association Status Description
New
This is the initial default status.
Associated
The invoice line has been automatically associated to the Trade Operation Charge line.
Manually Associated
The invoice line has been manually associated to the Trade Operation Charge line.
Needs Review
The invoice line has a matching Trade Operation charge line, but you need to review andconrm the association.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 5Landed Cost Management
268
Association Status Description
Good Match
There are multiple matches between the Trade Operation charge line and the invoice line. Theuser needs to select the correct match and conrm the association.
Potential Match
Only the Procurement BU, Supplier, and Supplier Site on the Trade Operation Charge line andinvoice line match. There are no matches found using the charge references.
No Match
The Associate Invoices to Trade Operation Charges process has been run on the invoice linebut a match has not been found.
Canceled
The invoice line has been canceled in Accounts Payable.
Upload Trade Operation Charges in a SpreadsheetYou can use a spreadsheet for bulk data updates to an existing Trade Operation. Add, edit, and delete operations can beperformed to update the charge information. You can use a spreadsheet to complete bulk updates for the following:
• Landed cost charges
• Landed cost charge references
• Landed cost related charges
The ADF Desktop Integrator is a prerequisite for capturing charges in a spreadsheet, and can be installed from the Toolssection of the Navigator menu.
To capture Trade Operation charges in a spreadsheet, complete the following steps.
1. From the Navigator menu, select Receipt Accounting.2. From the Landed Costs tasks list, select Capture Trade Operation Charges in Spreadsheet.3. Download the Capture Charges spreadsheet.4. Open the spreadsheet. A pop-up message asks if you want to connect to an application. Click Yes, and enter
your sign-on credentials.5. Search on the Capture Charges tab for the Trade Operation to be updated. The spreadsheet is populated with
the charge lines and corresponding Trade Operation data from the result set.6. Perform the required edit, add, or delete operations. The Changed column is automatically updated with a
change indicator icon to conrm which rows have been modied.7. Click Upload to apply your changes.8. Repeat the above steps for any changes required on the Capture Charge References tab and the Capture
Related Charges tab.
Analyze Landed CostsCompare and evaluate landed cost trends and variances, including material costs and third-party charges, acrossbusiness units, inventory organizations, and routes. You can view landed cost variances and charge analyses in the
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 5Landed Cost Management
269
Landed Cost Management work area on the Analyze Landed Cost Charges page and on the Analyze Landed CostVariances page. You can analyze landed cost charges and variances based on key dimensions, such as the following:
• Item Category
• Item Name
• Charge Name
• Supplier
To analyze landed cost variances, complete the following steps.
1. From the Navigator menu, select Receipt Accounting.2. From the Tasks panel, select Manage Landed Cost Processes.3. Run the process Summarize Landed Cost Data.
This process prepares landed cost data for multidimensional analysis.4. From the Tasks panel, select Analyze Landed Cost Variances, and complete the required search elds.5. In the View Landed Cost Charges By list select Business Unit.
The page displays the landed cost charge data, including the accounted amount, estimate amount, and actualamount in an expandable tree table.
6. Click on the Trends icon to display the data in graph format.
Related Topics
• Set Up Landed Cost Management
• Considerations for Seing Up Landed Cost Management
FAQs for Landed Cost Management
What are landed costs?Landed costs are the sum of the material costs and the additional landed cost charges associated with the purchasingand receipt of material.
What's a landed cost charge?Landed cost charges are additional material supplier charges and third party charges that are incurred in the processof receiving material into ownership or possession, including consigned scenarios where custody may be with anotherparty.
What's a trade operation?A trade operation is an entity that is used to group landed cost charges expected to be incurred for material shipments.You can create a trade operation for an upcoming shipment to capture the landed cost charges incurred for thatshipment. You can also create the trade operation after the actual shipment.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 5Landed Cost Management
270
What's a landed cost reference type?Reference types are business documents, such as bills of lading, that are associated with landed cost charges in tradeoperations to provide an audit trail of the charges. Reference types are also matched with invoices to capture actualcharge amounts.
Can I create a trade operation with multiple charge amounts inmultiple currencies?Yes, a trade operation can contain charges from one or more service providers in multiple currencies.
What are the criteria to enable a charge invoice for the AssociateCharge Invoice task?The following criteria apply to enable a Charge Invoice for the Associate Charge Invoice task:
• The invoice line type must be Item, Freight, or Miscellaneous.
• The Enable option must be selected on the Landed Cost section of the invoice line.
• Complete the Validate and Post to Ledger invoice actions. The invoice status must be Validated and Accounted.
• Run the following process from the Tools > Scheduled Processes page: Transfer Costs to Cost Management.This will make the invoices available for processing in Landed Cost Management.
• Run the following process from the Manage Landed Cost Processes page: Prepare Invoice Data.
• Run the following process from the Manage Landed Cost Processes page: Associate Invoices to TradeOperation Charges.
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
271
6 Appendix: Events and Cost AccountingDistributions
Overview of Cost Accounting DistributionsFor every inventory and manufacturing transaction, there is an accounting entry in cost accounting. This appendixexplains the transaction events and their corresponding accounting entries in detail.
Note: You will notice either a single asterisk (*) or double asterisks (**) for some entries in the tables.• Single asterisk (*): You can track inventory in an asset subinventory location or in an expense subinventory
location. An asterisk (*) in the table indicates that the accounting line type diers depending on whetheryou track the inventory as an asset or expense. When you track inventory as an asset, you must dene aninventory valuation account in your accounting rules. Similarly, when you track inventory as an expense, youmust dene an expense account in your accounting rules.
• Two asterisks (**): Indicates accounting distributions that are applicable only to standard cost.
Inventory Transaction Events
Miscellaneous Transaction EventsThe following transaction event types follow the paern shown in the table.
• Account Alias Issue
• Account Issue
• Miscellaneous Issue
• Move Order Issue
• Cycle Count Adjustment for a Negative Adjustment
• Physical Inventory Adjustment for a Negative Adjustment
Accounting Line Type Transaction Type
Oset
Debit
Inventory Valuation or Expense *
Credit
Expense
Debit
Material Overhead Absorption
Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
272
Accounting Line Type Transaction Type
Oset
Debit
Miscellaneous Issue Variance **
Credit
Oset
Debit
Cost Variance
Credit
Intraorganization Transfer EventsThe following transaction event types follow the paern shown in the table.
• Cycle Count Transfer for Issue (that is, a material issued out of the inventory)
• Lot Grade Change for Issue
• Movement Request Transfer for Issue
• Physical Inventory Transfer for Issue
• Planning Transfer for Issue
• Sales Order Pick for Issue
• Subinventory Transfer for Issue
The following table lists the accounting line types and their accounting entries.
Accounting Line Type Transaction Type
Valuation Unit Transfer Gain Loss
Debit
Inventory Valuation or Expense *
Credit
Expense
Debit
Material Overhead Absorption
Credit
The following transaction event types follow the paern shown in the table below.
• Cycle Count Transfer for Receipt (that is, a material received into inventory)
• Lot Grade Change for Receipt
• Movement Request Transfer for Receipt
• Physical Inventory Transfer for Receipt
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
273
• Planning Transfer for Receipt
• Sales Order Pick for Receipt
• Subinventory Transfer for Receipt
The following table lists the accounting line types and their accounting entries.
Accounting Line Type Transaction Type
Inventory Valuation or Expense *
Debit
Valuation Unit Transfer Gain Loss
Credit
Inventory Valuation or Expense *
Debit
Material Overhead Absorption
Credit
Valuation Unit Transfer Variance **
Debit
Valuation Unit Transfer Gain Loss
Credit
Direct Organization Transfer EventsThe following table lists the direct organization events and their accounting entries.
Event Type Name Accounting Line Type Transaction Type
Shipment
Trade In-Transit Valuation
Debit
Shipment
Inventory Valuation or Expense *
Credit
Shipment
Expense
Debit
Shipment
Material Overhead Absorption
Credit
Shipment
Oset
Debit
Shipment
Cost Variance
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y)
Inter Company Cost of Goods Sold
Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
274
Event Type Name Accounting Line Type Transaction Type
Trade In-Transit Issue (IntercompanyInvoicing Option = Y)
Trade In-Transit Valuation
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y)
Expense
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y)
Overhead Absorption
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Interorganization Receivables
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Trade In-Transit Valuation
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Expense
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Overhead Absorption
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Interorganization Receivables
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Interorganization Gain or Loss
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Trade Clearing
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation or Expense *
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation
Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
275
Event Type Name Accounting Line Type Transaction Type
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Trade Clearing
Credit
Receipt
Inventory Valuation or Expense *
Debit
Receipt
Trade In-Transit Valuation
Credit
Receipt
Inventory Valuation or Expense *
Debit
Receipt
Material Overhead Absorption
Credit
Receipt
Transfer Price Variance **
Debit
Receipt
Trade In-Transit Valuation
Credit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Trade Clearing
Debit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation
Credit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Expense
Debit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Trade Clearing
Debit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Trade In-Transit Valuation
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Inter Company COGS
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Trade In-Transit Valuation or Expense *
Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
276
Event Type Name Accounting Line Type Transaction Type
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Overhead Absorption
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Trade In-Transit Valuation
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Interorganization Receivables
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Trade In-Transit Valuation or Expense *
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Overhead Absorption
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Interorganization Gain Loss
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Interorganization Receivables
Credit
Interorganization Transfer EventsThe following table lists the interorganization transfer events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
Shipment to In-Transit
Trade In-Transit Valuation
Debit
Shipment to In-Transit
Inventory Valuation or Expense *
Credit
Shipment to In-Transit
Expense
Debit
Shipment to In-Transit
Material Overhead Absorption
Credit
Shipment to In-Transit
Oset
Debit
Shipment to In-Transit
Cost Variance
Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
277
Event Type Name Accounting Line Type Transaction Type
Trade In-Transit Issue (IntercompanyInvoicing Option = Y)
Intercompany Cost of Goods Sold
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y)
Trade In-Transit Valuation
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y)
Expense
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y)
Overhead Absorption
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Interorganization Receivables
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Trade In-Transit Valuation
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Expense
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Overhead Absorption
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Interorganization Receivables
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Interorganization Gain or Loss
Credit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation
Debit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Trade Clearing
Credit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation or Expense *
Debit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation
Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
278
Event Type Name Accounting Line Type Transaction Type
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Trade Clearing
Credit
Receipt from In-Transit
Inventory Valuation or Expense *
Debit
Receipt from In-Transit
Receiving Inspection
Credit
Receipt from In-Transit
Inventory Valuation or Expense *
Debit
Receipt from In-Transit
Material Overhead Absorption
Credit
Receipt from In-Transit
Transfer Price Variance **
Debit
Receipt from In-Transit
Receiving Inspection
Credit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Trade Clearing
Debit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation
Credit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Expense
Debit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Trade Clearing
Debit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Trade In-Transit Valuation
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Intercompany COGS
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Trade In-Transit Valuation or Expense *
Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
279
Event Type Name Accounting Line Type Transaction Type
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Overhead Absorption
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Trade In-Transit Valuation
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Interorganization Receivables
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Trade In-Transit Valuation or Expense *
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Overhead Absorption
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Interorganization Gain Loss
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Interorganization Receivables
Credit
Subinventory Transfer Order EventsThe following table lists the subinventory transfer events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
Transfer Order Intraorganization TransferShipment
Trade In-Transit Valuation
Debit
Transfer Order Intraorganization TransferShipment
Inventory Valuation or Expense *
Credit
Transfer Order Intraorganization TransferShipment
Expense
Debit
Transfer Order Intraorganization TransferShipment
Material Overhead Absorption
Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
280
Event Type Name Accounting Line Type Transaction Type
Transfer Order Intraorganization TransferReceipt
Inventory Valuation or Expense *
Debit
Transfer Order Intraorganization TransferReceipt
Trade In-Transit Valuation
Credit
Transfer Order Intraorganization TransferReceipt
Inventory Valuation or Expense *
Debit
Transfer Order Intraorganization TransferReceipt
Material Overhead Absorption
Credit
Transfer Order Intraorganization TransferReceipt
Valuation Unit Transfer Variance **
Debit
Transfer Order Intraorganization TransferReceipt
Trade In-Transit Valuation
Credit
Transfer Order Subinventory TransferIssue
Valuation Unit Transfer Gain Loss
Debit
Transfer Order Subinventory TransferIssue
Inventory Valuation or Expense *
Credit
Transfer Order Subinventory TransferIssue
Expense
Debit
Transfer Order Subinventory TransferIssue
Material Overhead Absorption
Credit
Transfer Order Subinventory TransferIssue
Inventory Valuation or Expense *
Debit
Transfer Order Subinventory TransferReceipt
Valuation Unit Transfer Gain or Loss
Credit
Transfer Order Subinventory TransferReceipt
Inventory Valuation Expense *
Debit
Transfer Order Subinventory TransferReceipt
Material Overhead Absorption
Credit
Transfer Order Subinventory TransferReceipt
Valuation Unit Transfer Variance **
Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
281
Event Type Name Accounting Line Type Transaction Type
Transfer Order Subinventory TransferReceipt
Valuation Unit Transfer Gain or Loss
Credit
Trade In-Transit Issue
Valuation Unit Transfer Gain or Loss
Debit
Trade In-Transit Issue
Trade In-Transit Valuation
Credit
Trade In-Transit Issue
Expense
Debit
Trade In-Transit Issue
Overhead Absorption
Credit
Trade In-Transit Receipt
Trade In-Transit Valuation
Debit
Trade In-Transit Receipt
Valuation Unit Transfer Gain or Loss
Credit
Trade In-Transit Receipt
Trade In-Transit Valuation or Expense *
Debit
Trade In-Transit Receipt
Overhead Absorption
Credit
Transfer Order Pick Issue
Valuation Unit Transfer Gain Loss
Debit
Transfer Order Pick Issue
Inventory Valuation or Expense *
Credit
Transfer Order Pick Issue
Expense
Debit
Transfer Order Pick Issue
Material Overhead Absorption
Credit
Transfer Order Pick Receipt
Inventory Valuation or Expense *
Debit
Transfer Order Pick Receipt
Valuation Unit Transfer Gain or Loss
Credit
Transfer Order Pick Receipt
Inventory Valuation or Expense *
Debit
Transfer Order Pick Receipt
Material Overhead Absorption
Credit
Transfer Order Pick Receipt
Valuation Unit Transfer Variance **
Debit
Transfer Order Pick Receipt Valuation Unit Transfer Gain or Loss Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
282
Event Type Name Accounting Line Type Transaction Type
Transfer Order Return Pick Issue
Valuation Unit Transfer Gain Loss
Debit
Transfer Order Return Pick Issue
Inventory Valuation or Expense *
Credit
Transfer Order Return Pick Issue
Expense
Debit
Transfer Order Return Pick Issue
Material Overhead Absorption
Credit
Transfer Order Return Pick Receipt
Inventory Valuation or Expense *
Debit
Transfer Order Return Pick Receipt
Valuation Unit Transfer Gain or Loss
Credit
Transfer Order Return Pick Receipt
Inventory Valuation or Expense *
Debit
Transfer Order Return Pick Receipt
Material Overhead Absorption
Credit
Transfer Order Return Pick Receipt
Valuation Unit Transfer Variance **
Debit
Transfer Order Return Pick Receipt
Valuation Unit Transfer Gain or Loss
Credit
Direct Organization Transfer Order EventsThe following table lists the direct organization transfer events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = Y)
Intercompany Cost of Goods Sold
Debit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = Y)
Trade In-Transit Valuation
Credit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = Y)
Expense
Debit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = Y)
Overhead Absorption
Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
283
Event Type Name Accounting Line Type Transaction Type
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = N)
Interorganization Receivables
Debit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = N)
Trade In-Transit Valuation
Credit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = N)
Expense
Debit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = N)
Overhead Absorption
Credit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = N)
Interorganization Receivables
Debit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = N)
Interorganization Gain or Loss
Credit
Transfer Order Trade In-TransitReceipt(Intercompany Invoicing Option =Y or N)
Trade In-Transit Valuation
Debit
Transfer Order Trade In-TransitReceipt(Intercompany Invoicing Option =Y or N)
Trade Clearing
Credit
Transfer Order Trade In-TransitReceipt(Intercompany Invoicing Option =Y or N)
Trade In-Transit Valuation or Expense *
Debit
Transfer Order Trade In-TransitReceipt(Intercompany Invoicing Option =Y or N)
Overhead Absorption
Credit
Transfer Order Trade In-TransitReceipt(Intercompany Invoicing Option =Y or N)
Trade In-Transit Valuation
Debit
Transfer Order Trade In-TransitReceipt(Intercompany Invoicing Option =Y or N)
Trade Clearing
Credit
Transfer Order Trade In-Transit Return(Intercompany Invoicing Option = Y or N)
Trade Clearing
Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
284
Event Type Name Accounting Line Type Transaction Type
Transfer Order Trade In-Transit Return(Intercompany Invoicing Option = Y or N)
Trade In-Transit Valuation
Credit
Transfer Order Trade In-Transit Return(Intercompany Invoicing Option = Y or N)
Expense
Debit
Transfer Order Trade In-Transit Return(Intercompany Invoicing Option = Y or N)
Overhead Absorption
Credit
Transfer Order Trade In-Transit Return(Intercompany Invoicing Option = Y or N)
Trade Clearing
Debit
Transfer Order Trade In-Transit Return(Intercompany Invoicing Option = Y or N)
Trade In-Transit Valuation
Credit
Transfer Order Trade In-Transit ReturnReceipt (Intercompany Invoicing Option =Y)
Trade In-Transit Valuation
Debit
Transfer Order Trade In-Transit ReturnReceipt (Intercompany Invoicing Option =Y)
Intercompany COGS
Credit
Transfer Order Trade In-Transit ReturnReceipt (Intercompany Invoicing Option =Y)
Trade In-Transit Valuation or Expense *
Debit
Transfer Order Trade In-Transit ReturnReceipt (Intercompany Invoicing Option =Y)
Overhead Absorption
Credit
Transfer Order Trade In-Transit ReturnReceipt (Intercompany Invoicing Option =N)
Trade In-Transit Valuation
Debit
Transfer Order Trade In-Transit ReturnReceipt (Intercompany Invoicing Option =N)
Interorganization Receivables
Credit
Transfer Order Trade In-Transit ReturnReceipt (Intercompany Invoicing Option =N)
Trade In-Transit Valuation or Expense *
Debit
Transfer Order Trade In-Transit ReturnReceipt (Intercompany Invoicing Option =N)
Overhead Absorption
Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
285
Event Type Name Accounting Line Type Transaction Type
Transfer Order Trade In-Transit ReturnReceipt (Intercompany Invoicing Option =N)
Interorganization Gain Loss
Debit
Transfer Order Trade In-Transit ReturnReceipt (Intercompany Invoicing Option =N)
Interorganization Receivables
Credit
Transfer Order Transfer Shipment
Trade In-Transit Valuation
Debit
Transfer Order Transfer Shipment
Inventory Valuation or Expense *
Credit
Transfer Order Transfer Shipment
Expense
Debit
Transfer Order Transfer Shipment
Material Overhead Absorption
Credit
Transfer Order Transfer Shipment
Oset
Debit
Transfer Order Transfer Shipment
Cost Variance
Credit
Transfer Order Transfer Receipt
Inventory Valuation or Expense *
Debit
Transfer Order Transfer Receipt
Trade In-Transit Valuation
Credit
Transfer Order Transfer Receipt
Inventory Valuation or Expense *
Debit
Transfer Order Transfer Receipt
Material Overhead Absorption
Credit
Transfer Order Transfer Receipt
Transfer Price Variance **
Debit
Transfer Order Transfer Receipt
Trade In-Transit Valuation
Credit
Transfer Order Trade In-Transit ReturnReceipt (Intercompany Invoicing Option =Y)
Expense
Debit
Transfer Order Trade In-Transit ReturnReceipt (Intercompany Invoicing Option =Y)
Intercompany COGS
Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
286
Event Type Name Accounting Line Type Transaction Type
Transfer Order Return with scrap ow
Expense
Debit
Transfer Order Return with scrap ow
Overhead Absorption
Credit
Transfer Order Trade In-Transit ReturnReceipt (Intercompany Invoicing Option =N)
Expense
Debit
Transfer Order Trade In-Transit ReturnReceipt (Intercompany Invoicing Option =N)
Interorganization Receivables
Credit
Transfer Order Return with scrap ow
Expense
Debit
Transfer Order Return with scrap ow
Overhead Absorption
Credit
Transfer Order Return with scrap ow
Interorganization Gain Loss
Debit
Transfer Order Return with scrap ow
Expense
Credit
Interorganization Transfer Order EventsThe following table lists the transfer order events and their accounting entries.
Event Type Name Accounting Line Type Transaction Type
Transfer Order Shipment to In-Transit
Trade In-Transit Valuation
Debit
Transfer Order Shipment to In-Transit
Inventory Valuation or Expense *
Credit
Transfer Order Shipment to In-Transit
Expense
Debit
Transfer Order Shipment to In-Transit
Material Overhead Absorption
Credit
Transfer Order Shipment to In-Transit
Oset
Debit
Transfer Order Shipment to In-Transit
Cost Variance
Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
287
Event Type Name Accounting Line Type Transaction Type
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = Y)
Intercompany Cost of Goods Sold
Debit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = Y)
Trade In-Transit Valuation
Credit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = Y)
Expense
Debit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = Y)
Overhead Absorption
Credit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = N)
Interorganization Receivables
Debit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = N)
Trade In-Transit Valuation
Credit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = N)
Expense
Debit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = N)
Overhead Absorption
Credit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = N)
Interorganization Receivables
Debit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = N)
Interorganization Gain or Loss
Credit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = Y or N)
Trade In-Transit Valuation
Debit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = Y or N)
Trade Clearing
Credit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = Y or N)
Trade In-Transit Valuation or Expense *
Debit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = Y or N)
Overhead Absorption
Credit
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = Y or N)
Trade In-Transit Valuation
Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
288
Event Type Name Accounting Line Type Transaction Type
Transfer Order Trade In-Transit Issue(Intercompany Invoicing Option = Y or N)
Trade Clearing
Credit
Transfer Order Receipt from In-Transit
Inventory Valuation or Expense *
Debit
Transfer Order Receipt from In-Transit
Receiving Inspection
Credit
Transfer Order Receipt from In-Transit
Inventory Valuation or Expense *
Debit
Transfer Order Receipt from In-Transit
Material Overhead Absorption
Credit
Transfer Order Receipt from In-Transit
Transfer Price Variance **
Debit
Transfer Order Receipt from In-Transit
Receiving Inspection
Credit
Transfer Order Issue
Trade In-Transit Valuation
Debit
Transfer Order Receipt Issue
Inventory Valuation or Expense *
Credit
Transfer Order Receipt Issue
Expense
Debit
Transfer Order Receipt Issue
Material Overhead Absorption
Credit
Transfer Order Receipt Issue
Oset
Debit
Transfer Order Receipt Issue
Cost Variance
Credit
Transfer Order Return Shipment
Receiving Inspection
Debit
Transfer Order Return Shipment
Inventory Valuation or Expense *
Credit
Transfer Order Return Shipment
Expense
Debit
Transfer Order Return Shipment
Material Overhead Absorption
Credit
Transfer Order Return Shipment
Receiving Inspection
Debit
Transfer Order Return Shipment Transfer Price Variance ** Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
289
Event Type Name Accounting Line Type Transaction Type
Transfer Order Return Shipment
Receiving Inspection
Debit
Transfer Order Return Shipment
Cost Variance
Credit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Trade Clearing
Debit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation
Credit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Expense
Debit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Trade Clearing
Debit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Trade In-Transit Valuation
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Intercompany COGS
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Trade In-Transit Valuation or Expense *
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Overhead Absorption
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Trade In-Transit Valuation
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Interorganization Receivables
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Trade In-Transit Valuation or Expense *
Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
290
Event Type Name Accounting Line Type Transaction Type
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Overhead Absorption
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Interorganization Gain Loss
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Interorganization Receivables
Credit
Internal Drop Ship Transfer EventsThe following table lists the internal drop ship transfer events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
Physical Sales Order Issue
Trade In-Transit Valuation
Debit
Physical Sales Order Issue
Inventory Valuation or Expense *
Credit
Physical Sales Order Issue
Expense
Debit
Physical Sales Order Issue
Material Overhead Absorption
Credit
Physical Sales Order Issue
Oset
Debit
Physical Sales Order Issue
Cost Variance
Credit
Drop Shipment Trade In-Transit Issue(Intercompany Invoicing Option = Y)
Intercompany COGS
Debit
Drop Shipment Trade In-Transit Issue(Intercompany Invoicing Option = Y)
Trade In-Transit Valuation
Credit
Drop Shipment Trade In-Transit Issue(Intercompany Invoicing Option = Y)
Expense
Debit
Drop Shipment Trade In-Transit Issue(Intercompany Invoicing Option = Y)
Overhead Absorption
Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
291
Event Type Name Accounting Line Type Transaction Type
Drop Shipment Trade In-Transit Issue(Intercompany Invoicing Option = N)
Interorganization Receivables
Debit
Drop Shipment Trade In-Transit Issue(Intercompany Invoicing Option = N)
Trade In-Transit Valuation
Credit
Drop Shipment Trade In-Transit Issue(Intercompany Invoicing Option = N)
Expense
Debit
Drop Shipment Trade In-Transit Issue(Intercompany Invoicing Option = N)
Overhead Absorption
Credit
Drop Shipment Trade In-Transit Issue(Intercompany Invoicing Option = N)
Interorganization Receivables
Debit
Drop Shipment Trade In-Transit Issue(Intercompany Invoicing Option = N)
Interorganization Gain Loss
Credit
Drop Shipment Trade In-Transit Receipt(Intercompany Invoicing Option = Y or N)
Trade In-Transit Valuation
Debit
Drop Shipment Trade In-Transit Receipt(Intercompany Invoicing Option = Y or N)
Trade Clearing
Credit
Drop Shipment Trade In-Transit Receipt(Intercompany Invoicing Option = Y or N)
Trade In-Transit Valuation or Expense *
Debit
Drop Shipment Trade In-Transit Receipt(Intercompany Invoicing Option = Y or N)
Overhead Absorption
Credit
Drop Shipment Trade In-Transit Receipt(Intercompany Invoicing Option = Y or N)
Trade In-Transit Valuation
Debit
Drop Shipment Trade In-Transit Receipt(Intercompany Invoicing Option = Y or N)
Trade Clearing
Credit
Drop Shipment Trade Sales Issue(Intercompany Invoicing Option = Y or N)
Deferred Cost of Goods Sold
Debit
Drop Shipment Trade Sales Issue(Intercompany Invoicing Option = Y or N)
Trade In-Transit Valuation
Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
292
Event Type Name Accounting Line Type Transaction Type
Drop Shipment Trade Sales Issue(Intercompany Invoicing Option = Y or N)
Expense
Debit
Drop Shipment Trade Sales Issue(Intercompany Invoicing Option = Y or N)
Overhead Absorption
Credit
Drop Shipment Trade Sales Issue(Intercompany Invoicing Option = Y or N)
Deferred Cost of Goods Sold
Debit
Drop Shipment Trade Sales Issue(Intercompany Invoicing Option = Y or N)
Trade In-Transit Valuation
Credit
Physical RMA Receipt
Inventory Valuation or Expense *
Debit
Physical RMA Receipt
Trade In-Transit Valuation
Credit
Physical RMA Receipt
Inventory Valuation or Expense *
Debit
Physical RMA Receipt
Material Overhead Absorption
Credit
Trade Sales Return (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation
Debit
Trade Sales Return (IntercompanyInvoicing Option = Y or N)
Deferred RMA Gain or Loss
Credit
Trade Sales Return (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation or Expense *
Debit
Trade Sales Return (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Trade Clearing
Debit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation
Credit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Expense
Debit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
293
Event Type Name Accounting Line Type Transaction Type
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Trade Clearing
Debit
Trade In-Transit Return (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Trade In-Transit Valuation
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Intercompany COGS
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Trade In-Transit Valuation or Expense *
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Overhead Absorption
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Trade In-Transit Valuation
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Interorganization Receivables
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Trade In-Transit Valuation or Expense *
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Overhead Absorption
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Interorganization Gain Loss
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Interorganization Receivables
Credit
Purchasing Events
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
294
Receipt, Return, and Adjustment EventsThe following table lists the receipts, returns, and adjustments events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
PO Receipt into Inventory
Inventory Valuation or Expense *
Debit
PO Receipt into Inventory
Receiving Inspection
Credit
PO Receipt into Inventory
Inventory Valuation or Expense *
Debit
PO Receipt into Inventory
Material Overhead Absorption
Credit
PO Receipt into Inventory
Purchase Price Variance **
Debit
PO Receipt into Inventory
Receiving Inspection
Credit
Return to Supplier: Return to ReceivingInspection
Receiving Inspection
Debit
Return to Supplier: Return to ReceivingInspection
Inventory Valuation or Expense *
Credit
Return to Supplier: Return to ReceivingInspection
Expense
Debit
Return to Supplier: Return to ReceivingInspection
Material Overhead Absorption
Credit
Return to Supplier: Return to ReceivingInspection
Receiving Inspection
Debit
Return to Supplier: Return to ReceivingInspection
Purchase Price Variance **
Credit
Return to Supplier: Return to ReceivingInspection
Receiving Inspection
Debit
Return to Supplier: Return to ReceivingInspection
Cost Variance
Credit
PO Receipt Adjustment: Negative Receiving Inspection Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
295
Event Type Name Accounting Line Type Transaction Type
PO Receipt Adjustment: Negative
Inventory Valuation or Expense *
Credit
PO Receipt Adjustment: Negative
Expense
Debit
PO Receipt Adjustment: Negative
Material Overhead Absorption
Credit
PO Receipt Adjustment: Negative
Receiving Inspection
Debit
PO Receipt Adjustment: Negative
Purchase Price Variance **
Credit
PO Receipt Adjustment: Negative
Receiving Inspection
Debit
PO Receipt Adjustment: Negative
Cost Variance
Credit
PO Receipt Adjustment: Positive
Inventory Valuation or Expense *
Debit
PO Receipt Adjustment: Positive
Receiving Inspection
Credit
PO Receipt Adjustment: Positive
Inventory Valuation or Expense *
Debit
PO Receipt Adjustment: Positive
Material Overhead Absorption
Credit
PO Receipt Adjustment: Positive
Purchase Price Variance **
Debit
PO Receipt Adjustment: Positive
Receiving Inspection
Credit
PO Receipt Adjustment: Acquisition CostAdjustment - Positive
Inventory Valuation or Expense *
Debit
PO Receipt Adjustment: Acquisition CostAdjustment - Positive
Receiving Inspection
Credit
PO Receipt Adjustment: Acquisition CostAdjustment - Positive
Inventory Valuation or Expense *
Debit
PO Receipt Adjustment: Acquisition CostAdjustment - Positive
Material Overhead Absorption
Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
296
Event Type Name Accounting Line Type Transaction Type
PO Receipt Adjustment: Acquisition CostAdjustment - Positive
Purchase Price Variance **
Debit
PO Receipt Adjustment: Acquisition CostAdjustment - Positive
Receiving Inspection
Credit
PO Receipt Adjustment: Acquisition CostAdjustment - Negative
Receiving Inspection
Debit
PO Receipt Adjustment: Acquisition CostAdjustment - Negative
Inventory Valuation or Expense *
Credit
PO Receipt Adjustment: Acquisition CostAdjustment - Negative
Expense
Debit
PO Receipt Adjustment: Acquisition CostAdjustment - Negative
Material Overhead Absorption
Credit
PO Receipt Adjustment: Acquisition CostAdjustment - Negative
Receiving Inspection
Debit
PO Receipt Adjustment: Acquisition CostAdjustment - Negative
Purchase Price Variance **
Credit
PO Receipt Adjustment: Acquisition CostWrite O - Positive
Inventory Write O
Debit
PO Receipt Adjustment: Acquisition CostWrite O - Positive
Receiving Inspection
Credit
PO Receipt Adjustment: Acquisition CostWrite O - Positive
Inventory Write O or Expense *
Debit
PO Receipt Adjustment: Acquisition CostWrite O - Positive
Material Overhead Absorption
Credit
PO Receipt Adjustment: Acquisition CostWrite O - Negative
Receiving Inspection
Debit
PO Receipt Adjustment: Acquisition CostWrite O - Negative
Inventory Write O
Credit
PO Receipt: Acquisition Cost Adjustment
Inventory Valuation or Expense *
Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
297
Event Type Name Accounting Line Type Transaction Type
PO Receipt: Acquisition Cost Adjustment
Receiving Inspection
Credit
PO Receipt: Acquisition Cost Adjustment
Inventory Valuation or Expense *
Debit
PO Receipt: Acquisition Cost Adjustment
Material Overhead Absorption
Credit
PO Receipt: Acquisition Cost Adjustment
Purchase Price Variance **
Debit
PO Receipt: Acquisition Cost Adjustment
Receiving Inspection
Credit
PO Receipt: Acquisition Cost AdjustmentWrite-o
Inventory Write O
Debit
PO Receipt: Acquisition Cost AdjustmentWrite-o
Receiving Inspection
Credit
PO Receipt: Acquisition Cost AdjustmentWrite-o
Inventory Write O or Expense *
Debit
PO Receipt: Acquisition Cost AdjustmentWrite-o
Material Overhead Absorption
Credit
Return to Supplier: Acquisition CostAdjustment
Receiving Inspection
Debit
Return to Supplier: Acquisition CostAdjustment
Inventory Valuation or Expense *
Credit
Return to Supplier: Acquisition CostAdjustment
Expense
Debit
Return to Supplier: Acquisition CostAdjustment
Material Overhead Absorption
Credit
Return to Supplier: Acquisition CostAdjustment
Receiving Inspection
Debit
Return to Supplier: Acquisition CostAdjustment
Purchase Price Variance **
Credit
Return to Supplier: Acquisition Cost Write-o
Receiving Inspection
Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
298
Event Type Name Accounting Line Type Transaction Type
Return to Supplier: Acquisition Cost Write-o
Inventory Write-O
Credit
Return to Supplier: Acquisition Cost Write-o
Expense
Debit
Return to Supplier: Acquisition Cost Write-o
Material Overhead Absorption
Credit
Global Procurement EventsThe following table lists the global procurement events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation
Debit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Trade Clearing
Credit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation or Expense *
Debit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation
Debit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Trade Clearing
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y)
Intercompany Cost of Goods Sold
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y)
Trade In-Transit Valuation
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y)
Expense
Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
299
Event Type Name Accounting Line Type Transaction Type
Trade In-Transit Issue (IntercompanyInvoicing Option = Y)
Overhead Absorption
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Interorganization Receivable
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Trade In-Transit Valuation
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Expense
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Overhead Absorption
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Interorganization Receivables
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = N)
Interorganization Gain or Loss
Credit
PO Delivery into Inventory
Inventory Valuation or Expense *
Debit
PO Delivery into Inventory
Receiving Inspection
Credit
PO Delivery into Inventory
Inventory Valuation or Expense *
Debit
PO Delivery into Inventory
Material Overhead Absorption
Credit
PO Delivery into Inventory
Purchase Price Variance **
Debit
PO Delivery into Inventory
Receiving Inspection
Credit
PO Receipt Adjustment: Positive
Inventory Valuation or Expense *
Debit
PO Receipt Adjustment: Positive
Receiving Inspection
Credit
PO Receipt Adjustment: Positive
Inventory Valuation or Expense *
Debit
PO Receipt Adjustment: Positive Material Overhead Absorption Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
300
Event Type Name Accounting Line Type Transaction Type
PO Receipt Adjustment: Positive
Transfer Price Variance **
Debit
PO Receipt Adjustment: Positive
Receiving Inspection
Credit
PO Receipt Adjustment: Negative
Receiving Inspection
Debit
PO Receipt Adjustment: Negative
Inventory Valuation or Expense *
Credit
PO Receipt Adjustment: Negative
Inventory Valuation or Expense *
Debit
PO Receipt Adjustment: Negative
Material Overhead Absorption
Credit
PO Receipt Adjustment: Negative
Receiving Inspection
Debit
PO Receipt Adjustment: Negative
Transfer Price Variance **
Credit
PO Receipt Adjustment: Negative
Receiving Inspection
Debit
PO Receipt Adjustment: Negative
Cost Variance
Credit
PO Receipt Adjustment: Transfer (Issue)
Receiving Inspection
Debit
PO Receipt Adjustment: Transfer (Issue)
Inventory Valuation or Expense *
Credit
PO Receipt Adjustment: Transfer (Issue)
Inventory Valuation or Expense *
Debit
PO Receipt Adjustment: Transfer (Issue)
Material Overhead Absorption
Credit
PO Receipt Adjustment: Transfer (Issue)
Receiving Inspection
Debit
PO Receipt Adjustment: Transfer (Issue)
Transfer Price Variance **
Credit
PO Receipt Adjustment: Transfer (Issue)
Receiving Inspection
Debit
PO Receipt Adjustment: Transfer (Issue)
Cost Variance
Credit
Return to Supplier: Return to Inspection -Negative
Receiving Inspection
Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
301
Event Type Name Accounting Line Type Transaction Type
Return to Supplier: Return to Inspection -Negative
Inventory Valuation or Expense *
Credit
Return to Supplier: Return to Inspection -Negative
Expense
Debit
Return to Supplier: Return to Inspection -Negative
Material Overhead Absorption
Credit
Return to Supplier: Return to Inspection -Negative
Receiving Inspection
Debit
Return to Supplier: Return to Inspection -Negative
Transfer Price Variance **
Credit
Return to Supplier: Return to Inspection -Negative
Receiving Inspection
Debit
Return to Supplier: Return to Inspection -Negative
Cost Variance
Credit
Return to Supplier (Return to Inspection):Transfer
Receiving Inspection
Debit
Return to Supplier (Return to Inspection):Transfer
Inventory Valuation or Expense *
Credit
Return to Supplier (Return to Inspection):Transfer
Inventory Write o or Expense *
Debit
Return to Supplier (Return to Inspection):Transfer
Material Overhead Absorption
Credit
Return to Supplier (Return to Inspection):Transfer
Receiving Inspection
Debit
Return to Supplier (Return to Inspection):Transfer
Transfer Price Variance **
Credit
Return to Supplier (Return to Inspection):Transfer
Receiving Inspection
Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
302
Event Type Name Accounting Line Type Transaction Type
Return to Supplier (Return to Inspection):Transfer
Cost Variance
Credit
Trade In-Transit Return (IntercompanyInvoicing Option = N)
Trade Clearing
Debit
Trade In-Transit Return (IntercompanyInvoicing Option = N)
Trade In-Transit Valuation
Credit
Trade In-Transit Return (IntercompanyInvoicing Option = N)
Expense
Debit
Trade In-Transit Return (IntercompanyInvoicing Option = N)
Overhead Absorption
Credit
Trade In-Transit Return (IntercompanyInvoicing Option = N)
Trade Clearing
Debit
Trade In-Transit Return (IntercompanyInvoicing Option = N)
Trade In-Transit Valuation
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Trade In-Transit Valuation
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Intercompany COGS
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Trade In-Transit Valuation or Expense *
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = Y)
Overhead Absorption
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Trade In-Transit Valuation
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Interorganization Receivables
Credit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Trade In-Transit Valuation or Expense *
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Overhead Absorption
Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
303
Event Type Name Accounting Line Type Transaction Type
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Interorganization Gain Loss
Debit
Trade In-Transit Return Receipt(Intercompany Invoicing Option = N)
Interorganization Receivables
Credit
Trade In-Transit Receipt: Acquisition CostAdjustment (Intercompany InvoicingOption = Y or N)
Trade In-Transit Valuation
Debit
Trade In-Transit Receipt: Acquisition CostAdjustment (Intercompany InvoicingOption = Y or N)
Trade Clearing
Credit
Trade In-Transit Receipt: Acquisition CostAdjustment (Intercompany InvoicingOption = Y or N)
Trade In-Transit Valuation or Expense *
Debit
Trade In-Transit Receipt: Acquisition CostAdjustment (Intercompany InvoicingOption = Y or N)
Overhead Absorption
Credit
PO Receipt: Acquisition Cost Adjustment
Inventory Valuation or Expense *
Debit
PO Receipt: Acquisition Cost Adjustment
Receiving Inspection
Credit
PO Receipt: Acquisition Cost Adjustment
Inventory Valuation or Expense *
Debit
PO Receipt: Acquisition Cost Adjustment
Material Overhead Absorption
Credit
PO Receipt: Acquisition Cost Adjustment
Purchase Price Variance **
Debit
PO Receipt: Acquisition Cost Adjustment
Receiving Inspection
Credit
PO Receipt: Acquisition Cost Write-o
Inventory Write O
Debit
PO Receipt: Acquisition Cost Write-o
Receiving Inspection
Credit
PO Receipt: Acquisition Cost Write-o
Inventory Write O or Expense *
Debit
PO Receipt: Acquisition Cost Write-o Material Overhead Absorption Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
304
Event Type Name Accounting Line Type Transaction Type
Return to Supplier: Acquisition CostAdjustment
Receiving Inspection
Debit
Return to Supplier: Acquisition CostAdjustment
Inventory Valuation or Expense *
Credit
Return to Supplier: Acquisition CostAdjustment
Expense
Debit
Return to Supplier: Acquisition CostAdjustment
Material Overhead Absorption
Credit
Return to Supplier: Acquisition CostAdjustment
Receiving Inspection
Debit
Return to Supplier: Acquisition CostAdjustment
Purchase Price Variance **
Credit
Return to Supplier: Acquisition Cost Write-o
Receiving Inspection
Debit
Return to Supplier: Acquisition Cost Write-o
Inventory Write-O
Credit
Return to Supplier: Acquisition Cost Write-o
Expense
Debit
Return to Supplier: Acquisition Cost Write-o
Material Overhead Absorption
Credit
PO Receipt Adjustment: Acquisition CostAdjustment - Positive
Inventory Valuation or Expense *
Debit
PO Receipt Adjustment: Acquisition CostAdjustment - Positive
Receiving Inspection
Credit
PO Receipt Adjustment: Acquisition CostAdjustment - Positive
Inventory Valuation or Expense *
Debit
PO Receipt Adjustment: Acquisition CostAdjustment - Positive
Material Overhead Absorption
Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
305
Event Type Name Accounting Line Type Transaction Type
PO Receipt Adjustment: Acquisition CostAdjustment - Positive
Purchase Price Variance **
Debit
PO Receipt Adjustment: Acquisition CostAdjustment - Positive
Receiving Inspection
Credit
PO Receipt Adjustment: Acquisition CostAdjustment - Negative
Receiving Inspection
Debit
PO Receipt Adjustment: Acquisition CostAdjustment - Negative
Inventory Valuation or Expense *
Credit
PO Receipt Adjustment: Acquisition CostAdjustment - Negative
Expense
Debit
PO Receipt Adjustment: Acquisition CostAdjustment - Negative
Material Overhead Absorption
Credit
PO Receipt Adjustment: Acquisition CostAdjustment - Negative
Receiving Inspection
Debit
PO Receipt Adjustment: Acquisition CostAdjustment - Negative
Purchase Price Variance **
Credit
PO Receipt Adjustment: Acquisition CostWrite O - Positive
Inventory Write O
Debit
PO Receipt Adjustment: Acquisition CostWrite O - Positive
Receiving Inspection
Credit
PO Receipt Adjustment: Acquisition CostWrite O - Positive
Inventory Write O
Debit
PO Receipt Adjustment: Acquisition CostWrite O - Positive
Material Overhead Absorption
Credit
PO Receipt Adjustment: Acquisition CostWrite O - Negative
Receiving Inspection
Debit
PO Receipt Adjustment: Acquisition CostWrite O - Negative
Inventory Write O
Credit
PO Receipt Adjustment: Acquisition CostWrite O - Negative
Expense
Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
306
Event Type Name Accounting Line Type Transaction Type
PO Receipt Adjustment: Acquisition CostWrite O - Negative
Material Overhead Absorption
Credit
Outside Processing EventsThe following table lists the outside processing events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
Purchase Order Receipt Into Work Order
Work in Process
Debit
Purchase Order Receipt Into Work Order
Receiving Inspection
Credit
Purchase Order Receipt Into Work Order
Inventory Valuation or Expense *
Debit
Purchase Order Receipt Into Work Order
Material Overhead Absorption
Credit
Purchase Order Receipt Into Work Order
Purchase Price Variance **
Debit
Purchase Order Receipt Into Work Order
Receiving Inspection
Credit
Sales EventsThe following table lists the sales events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
Sales Order Issue
Deferred Cost of Goods Sold
Debit
Sales Order Issue
Inventory Valuation or Expense *
Credit
Sales Order Issue
Expense
Debit
Sales Order Issue Material Overhead Absorption Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
307
Event Type Name Accounting Line Type Transaction Type
Sales Order Issue
Oset
Debit
Sales Order Issue
Cost Variance
Credit
RMA Receipt
Inventory Valuation or Expense *
Debit
RMA Receipt
Deferred RMA Gain Loss
Credit
RMA Receipt
Inventory Valuation
Debit
RMA Receipt
Material Overhead Absorption
Credit
Work in Process Events
Work in Process EventsThe following table lists the work in process events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
Material Issue
WIP Valuation
Debit
Material Issue
Inventory Valuation or Expense *
Credit
Material Issue
Expense
Debit
Material Issue
Material Overhead Absorption
Credit
Material Issue
WIP Valuation
Debit
Material Issue
Cost Variance
Credit
Resource Charging
WIP Valuation
Debit
Resource Charging Resource Absorption Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
308
Event Type Name Accounting Line Type Transaction Type
Resource Charge Reversal
Resource Absorption
Debit
Resource Charge Reversal
WIP Valuation
Credit
Product Completion
Inventory Valuation or Expense *
Debit
Product Completion
WIP Valuation
Credit
Product Completion
Expense
Debit
Product Completion
Material Overhead Absorption
Credit
Scrap
Scrap Expense
Debit
Scrap
WIP Valuation
Credit
Scrap Return
WIP Valuation
Debit
Scrap Return
Scrap Expense
Credit
Material Return
Inventory Valuation or Expense *
Debit
Material Return
WIP Valuation
Credit
Material Return
Expense
Debit
Material Return
Material Overhead Absorption
Credit
Material Return
WIP Return Price Variance **
Debit
Material Return
WIP Valuation
Credit
Product Return
WIP Valuation
Debit
Product Return
Inventory Valuation or Expense *
Credit
Product Return Expense Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
309
Event Type Name Accounting Line Type Transaction Type
Product Return
Material Overhead Absorption
Credit
Job Close Variance - Negative
WIP Valuation
Debit
Job Close Variance - Negative
Batch Size Variance
Credit
Job Close Variance - Negative
Component Sub Variance
Credit
Job Close Variance - Negative
Eciency Variance
Credit
Job Close Variance - Negative
Job Close Variance
Credit
Job Close Variance - Negative
Material Rate Variance
Credit
Job Close Variance - Negative
Resource Rate Variance
Credit
Job Close Variance - Negative
Resource Sub Variance
Credit
Job Close Variance - Negative
Usage Variance
Credit
Job Close Variance - Positive
Batch Size Variance
Debit
Job Close Variance - Positive
Component Sub Variance
Debit
Job Close Variance - Positive
Eciency Variance
Debit
Job Close Variance - Positive
Job Close Variance
Debit
Job Close Variance - Positive
Material Rate Variance
Debit
Job Close Variance - Positive
Resource Rate Variance
Debit
Job Close Variance - Positive
Resource Sub Variance
Debit
Job Close Variance - Positive
Usage Variance
Debit
Job Close Variance - Positive WIP Valuation Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
310
Event Type Name Accounting Line Type Transaction Type
Note: If there is a negative balance in the work in process valuation, the Debit or Credit signs are switchedduring the job closure.
Maintenance Work Order EventsThe following table lists the maintenance work order events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
Maintenance Material Issue
Maintenance Expense
Debit
Maintenance Material Issue
Inventory or Expense
Credit
Maintenance Material Issue
Maintenance Expense
Debit
Maintenance Material Issue
Material Overhead Account
Credit
Maintenance Material Return
Inventory or Expense
Debit
Maintenance Material Return
Maintenance Expense
Credit
Maintenance Material Return
Material Overhead Account
Debit
Maintenance Material Return
Maintenance Expense
Credit
Maintenance Resource Absorption
Maintenance Expense
Debit
Maintenance Resource Absorption
Resource Absorption
Credit
Maintenance Resource Reversals
Resource Absorption
Debit
Maintenance Resource Reversals
Maintenance Expense
Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
311
Rework or Transform Work Order EventsThe following table lists the rework or transform events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
WIP Negative Material Issue
Inventory
Debit
WIP Negative Material Issue
WIP Valuation
Credit
WIP Negative Material Issue
Inventory or Expense
Debit
WIP Negative Material Issue
Maintenance Expense
Credit
WIP Negative Material Return
Material Overhead Account
Debit
WIP Negative Material Return
Maintenance Expense
Credit
Cost Adjustment EventsThe following table lists the cost adjustment events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
Standard Cost Adjustment - Positive
Inventory Valuation or Expense *
Debit
Standard Cost Adjustment - Positive
Standard Cost Adjustment **
Credit
Standard Cost Adjustment - Positive
Expense
Debit
Standard Cost Adjustment - Positive
Material Overhead Absorption **
Credit
Standard Cost Adjustment - Negative
Standard Cost Adjustment **
Debit
Standard Cost Adjustment - Negative
Inventory Valuation or Expense *
Credit
Standard Cost Adjustment - Negative Expense Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
312
Event Type Name Accounting Line Type Transaction Type
Standard Cost Adjustment - Negative
Material Overhead Absorption **
Credit
Layer Cost Adjustment - Positive
Inventory Valuation or Expense *
Debit
Layer Cost Adjustment - Positive
Oset
Credit
Layer Cost Adjustment - Positive
Inventory Valuation or Expense *
Debit
Layer Cost Adjustment - Positive
Material Overhead Absorption
Credit
Layer Cost Adjustment - Negative
Oset
Debit
Layer Cost Adjustment - Negative
Inventory Valuation or Expense *
Credit
Layer Cost Adjustment - Negative
Expense
Debit
Layer Cost Adjustment - Negative
Material Overhead Absorption
Credit
Manual Cost Adjustment - Positive
Inventory Valuation or Expense *
Debit
Manual Cost Adjustment - Positive
Oset
Credit
Manual Cost Adjustment - Positive
Inventory Valuation or Expense *
Debit
Manual Cost Adjustment - Positive
Material Overhead Absorption
Credit
Manual Cost Adjustment - Negative
Oset
Debit
Manual Cost Adjustment - Negative
Inventory Valuation or Expense *
Credit
Manual Cost Adjustment - Negative
Expense
Debit
Manual Cost Adjustment - Negative
Material Overhead Absorption
Credit
Manual Receipt Cost Adjustment -Positive
Inventory Valuation or Expense *
Debit
Manual Receipt Cost Adjustment -Positive Oset Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
313
Event Type Name Accounting Line Type Transaction Type
Manual Receipt Cost Adjustment -Positive
Inventory Valuation
Debit
Manual Receipt Cost Adjustment -Positive
Material Overhead Absorption **
Credit
Manual Receipt Cost Adjustment -Positive
Receipt Cost Adjustment Variance orExpense *
Debit
Manual Receipt Cost Adjustment -Positive
Oset
Credit
Manual Receipt Cost Adjustment -Positive
Receipt Cost Adjustment Variance orExpense *
Debit
Manual Receipt Cost Adjustment -Positive
Oset
Credit
Manual Receipt Cost Adjustment -Negative
Oset
Debit
Manual Receipt Cost Adjustment -Negative
Inventory Valuation or Expense *
Credit
Manual Receipt Cost Adjustment -Negative
Expense
Debit
Manual Receipt Cost Adjustment -Negative
Material Overhead Absorption **
Credit
Manual Receipt Cost Adjustment -Negative
Oset
Debit
Manual Receipt Cost Adjustment -Negative
Receipt Cost Adjustment Variance orExpense *
Credit
Manual Receipt Cost Adjustment -Negative
Oset
Debit
Manual Receipt Cost Adjustment -Negative
Receipt Cost Adjustment Variance orExpense*
Credit
Manual Receipt Cost Write-o- Positive
Inventory Write O
Debit
Manual Receipt Cost Write-o- Positive Oset Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
314
Event Type Name Accounting Line Type Transaction Type
Manual Receipt Cost Write-o- Negative
Oset
Debit
Manual Receipt Cost Write-o- Negative
Inventory Write O
Credit
Consigned Material Events
Purchasing EventsThe following table lists the purchasing events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
PO Delivery
Consigned Inventory
Debit
PO Delivery
Consigned Clearing
Credit
Return to Supplier
Consigned Clearing
Debit
Return to Supplier
Consigned Inventory
Credit
Transfer to Consigned
Consigned Inventory
Debit
Transfer to Consigned
Consigned Inventory Oset
Credit
Transfer to Owned
Consigned Inventory Oset
Debit
Transfer to Owned
Consigned Inventory
Credit
PO Receipt Adjustment: Positive
Consigned Inventory
Debit
PO Receipt Adjustment: Positive
Consigned Clearing
Credit
PO Receipt Adjustment: Negative
Consigned Clearing
Debit
PO Receipt Adjustment: Negative Consigned Inventory Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
315
Event Type Name Accounting Line Type Transaction Type
PO Delivery Cost Adjustment
Consigned Inventory
Debit
PO Delivery Cost Adjustment
Consigned Clearing
Credit
Cycle Count EventsThe following table lists the cycle count events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
Cycle Count Transfer - Receipt
Consigned Inventory
Debit
Cycle Count Transfer - Receipt
Consigned Valuation Unit Gain Loss
Credit
Cycle Count Transfer - Issue
Consigned Valuation Unit Gain Loss
Debit
Cycle Count Transfer - Issue
Consigned Inventory
Credit
Direct Organization Transfer EventsThe following table lists the direct organization transfer events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
Shipment
Consigned In-Transit
Debit
Shipment
Consigned Inventory
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Consigned Receivables
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Consigned In-Transit
Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
316
Event Type Name Accounting Line Type Transaction Type
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Expense
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Consigned In-Transit
Debit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Consigned Clearing
Credit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation or Expense *
Debit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Receipt
Consigned Inventory
Debit
Receipt
Consigned Inspection
Credit
Transfer to Owned
Inventory Valuation
Debit
Transfer to Owned
Trade In-Transit Valuation
Credit
Transfer to Owned
Inventory Valuation or Expense *
Debit
Transfer to Owned
Material Overhead Absorption
Credit
Transfer to Owned
Purchase Price Variance **
Debit
Transfer to Owned
Trade In-Transit Valuation
Credit
Transfer to Consigned
Trade In-Transit Valuation
Debit
Transfer to Consigned
Inventory Valuation
Credit
Transfer to Consigned
Expense
Debit
Transfer to Consigned Material Overhead Absorption Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
317
Event Type Name Accounting Line Type Transaction Type
Interorganization Transfer EventsThe following table lists the interorganization events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
In-transit Shipment
Consigned In-Transit
Debit
In-transit Shipment
Consigned Inventory
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Consigned Receivables
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Consigned In-Transit
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Expense
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Consigned In-Transit
Debit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Consigned Clearing
Credit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation or Expense *
Debit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Receipt
Consigned Inventory
Debit
Receipt
Consigned Inspection
Credit
Transfer to Owned Inventory Valuation Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
318
Event Type Name Accounting Line Type Transaction Type
Transfer to Owned
Trade In-Transit Valuation
Credit
Transfer to Owned
Inventory Valuation or Expense
Debit
Transfer to Owned
Material Overhead Absorption
Credit
Transfer to Owned
Purchase Price Variance **
Debit
Transfer to Owned
Trade In-Transit Valuation
Credit
Transfer to Consigned
Trade In-Transit Valuation
Debit
Transfer to Consigned
Inventory Valuation
Credit
Transfer to Consigned
Expense
Debit
Transfer to Consigned
Material Overhead Absorption
Credit
Direct Organization Transfer Order EventsThe following table lists the direct organization transfer events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Consigned Receivables
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Consigned In-Transit
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Expense
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Transfer to Consigned Trade In-Transit Valuation Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
319
Event Type Name Accounting Line Type Transaction Type
Transfer to Consigned
Inventory Valuation
Credit
Transfer to Consigned
Expense
Debit
Transfer to Consigned
Material Overhead Absorption
Credit
Transfer to Owned
Inventory Valuation
Debit
Transfer to Owned
Trade In-Transit Valuation
Credit
Transfer to Owned
Inventory Valuation or Expense *
Debit
Transfer to Owned
Material Overhead Absorption
Credit
Transfer to Owned
Purchase Price Variance **
Debit
Transfer to Owned
Trade In-Transit Valuation
Credit
Interorganization Transfer EventsThe following table lists the interorganization transfer events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Consigned Receivables
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Consigned In-Transit
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Expense
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Consigned In-Transit
Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
320
Event Type Name Accounting Line Type Transaction Type
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Consigned Clearing
Credit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation or Expense
Debit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Global Procurement EventsThe following table lists the global procurement events and the corresponding accounting entries.
Event Type Name Accounting Line Type Transaction Type
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Consigned In-Transit
Debit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Consigned Clearing
Credit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Trade In-Transit Valuation
Debit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Consigned Receivables
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Consigned In-Transit
Credit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Expense
Debit
Trade In-Transit Issue (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Consigned PO Delivery Consigned Inventory Debit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
321
Event Type Name Accounting Line Type Transaction Type
Consigned PO Delivery
Consigned Clearing
Credit
Consigned PO Delivery Adjustment -Positive
Consigned Inventory
Debit
Consigned PO Delivery Adjustment -Positive
Consigned Clearing
Credit
Consigned PO Delivery Adjustment -Negative
Consigned Clearing
Debit
Consigned PO Delivery Adjustment -Negative
Consigned Inventory
Credit
Trade In-Transit Return (IntercompanyInvoicing Option = Y)
Consigned Clearing
Debit
Trade In-Transit Return (IntercompanyInvoicing Option = Y)
Consigned In-Transit
Credit
Trade In-Transit Return (IntercompanyInvoicing Option = Y)
Expense
Debit
Trade In-Transit Return (IntercompanyInvoicing Option = Y)
Overhead Absorption
Credit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Consigned In-Transit
Debit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Consigned Clearing
Credit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Expense
Debit
Trade In-Transit Receipt (IntercompanyInvoicing Option = Y or N)
Overhead Absorption
Credit
Trade In-Transit Receipt Cost Adjustment(Intercompany Invoicing Option = Y or N)
Consigned Inventory
Debit
Trade In-Transit Receipt Cost Adjustment(Intercompany Invoicing Option = Y or N)
Consigned Clearing
Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Chapter 6Appendix: Events and Cost Accounting Distributions
322
Event Type Name Accounting Line Type Transaction Type
Trade In-Transit Receipt Cost Adjustment(Intercompany Invoicing Option = Y or N)
Consigned Inventory
Debit
Trade In-Transit Receipt Cost Adjustment(Intercompany Invoicing Option = Y or N)
Consigned Clearing
Credit
Trade In-Transit Receipt Cost Adjustment(Intercompany Invoicing Option = Y or N)
Trade In-Transit Valuation or Expense *
Debit
Trade In-Transit Receipt Cost Adjustment(Intercompany Invoicing Option = Y or N)
Overhead Absorption
Credit
Oracle SCM CloudUsing Supply Chain Cost Management
Glossary
323
Glossary
actual cost
A cost method that tracks the actual cost of each receipt into inventory. When depleting inventory, the processorlogically identifies the receipts that are consumed to satisfy the depletion, and assigns the associated receipt costs tothe depletion.
analysis group
Contains analysis code classifications for particular reporting purposes, for example fixed and variable costs analysisgroup.
cost book
A view or method of cost accounting for inventory transactions. You can create multiple cost books and assign them toa cost organization for different financial and management reporting purposes.
cost element
A cost that you can associate with an item so that you can monitor the cost through the inventory and accounting lifecycle. For example, you can monitor the material cost, overhead cost, and tax cost of an item. You can monitor each ofthese costs as a separate cost element.
cost organization
A grouping of inventory organizations that indicates legal and financial ownership of inventory, and which establishescommon costing and accounting policies.
cost organization book
Designates which cost book a cost organization uses for different costing and reporting purposes. For example, theCanada cost organization may use a perpetual average cost book and a primary cost book. In this case, there are twocost organization books: Canada-Perpetual Average, and Canada-Primary.
cost profile
Defines the cost accounting policies for items, such as the cost method and valuation structure.
DCOGS
Abbreviation for deferred cost of goods sold. Portion of cost of goods sold not recognized on the income statement,and deferred to a future accounting period, when matching revenue is recognized.
ERV
Abbreviation for exchange rate variance. The difference between the exchange rate used for receipt accrual and theexchange rate used for reversing the accrual.
Oracle SCM CloudUsing Supply Chain Cost Management
Glossary
324
FIFO
Abbreviation for first in, first out. A material control technique of rotating inventory stock so that the earliest inventoryunits received or produced are the first units used or shipped. The ending inventory therefore consists of the mostrecently acquired goods.
inventory organization
A logical or physical entity in the enterprise that tracks inventory transactions and balances, stores definitions of items,and manufactures or distributes products.
IPV
Abbreviation for invoice price variance. The difference between the invoice price and the purchase order price.
layer inventory cost
Inventory valuation that is based on the receipt layer cost, including overhead absorption and cost adjustments.
perpetual average cost
The average cost of an item, derived by continually averaging its valuation after each incoming transaction. Theaverage cost of an item is the sum of the debits and credits in the inventory general ledger balance, divided by the on-hand quantity.
PO
Abbreviation for purchase order.
receipt cost
The transaction cost of a purchase order receipt or a miscellaneous receipt, including additional acquisition cost orother cost adjustment.
receipt layer
Unique identification of delivery or put away of an item into inventory.
RMA
Abbreviation for return material authorization.
standard cost
An inventory valuation method in which inventory is valued at a predetermined standard value. You track variances forthe difference between the standard cost and the actual transaction cost, and you periodically update the standard costto bring it in line with actual costs.
Oracle SCM CloudUsing Supply Chain Cost Management
Glossary
325
TERV
Abbreviation for tax exchange rate variance. Tax component of exchange rate variance (ERV).
TIPV
Abbreviation for tax invoice price variance. Tax component of invoice price variance (IPV).
TRV
Abbreviation for tax rate variance. Difference between tax rates in purchase order document and invoice document.
valuation structure
Defines inventory control attributes that are used to calculate the cost of an item. For example, the valuation structureof an item can be inventory organization and subinventory, or lot, or grade.
valuation unit
Defines the set of values for the control attributes that are used to calculate the cost of an item. For example, valuationunit V1 is defined by cost organization A, item I1, and lot L1.
Oracle SCM CloudUsing Supply Chain Cost Management
Glossary
326