mapping above ground planimetric features using lidar dan senner gis analystrobert chavez cad...
TRANSCRIPT
Mapping above ground planimetric features using LiDARDan Senner GIS Analyst Robert Chavez CAD
Coordinator
Project Background
• Storm/Sanitary/Water piping conversion project completed
• Identified inaccuracies in District site plans/ campus map
• District GIS application PlantMan created
2
Jones Island
• Located in Milwaukee, WI
• Built in the early 1900’s
• Current site plan believed to be established by heads up digitization
3
4
GOAL: To create a survey grade site plan at Jones Island
Uses:
• Update PlantMan• Creation of Master CAD site drawings• All future District contracts will utilize Master
site plan• Eliminate inconsistencies between GIS & CAD
Current Site Plan Inaccuracies
5
Current Site Plan Inaccuracies
6
Missing Site in GIS
CAD Site Plan
Current Site Plan Inaccuracies
7
Misplaced Sites in GIS
CAD Site Plan
Current Site Plan Inaccuracies
8
Duplicate facility 282 on top does not exist
Site Plan Capture OptionsFirst Option:
• Traditional Survey done internally
• Work estimated at roughly 800 hours for Jones Island
Second Option:
• Develop RFP for work to be done by a consultant using LiDAR
9
Deliverables
10
Consultant
11
• RA Smith selected 10-1-2014
• Work commenced 11-10-14
• Final deliverable received 12-3-14
• Significant time and cost savings to District
12
Results“Improved Accuracy”
13
Results“Improved Accuracy”
Results“Improved Accuracy”
14
15
Results “Level Of Detail”
Original Site Plan
Updated Site Plan
16
Results “Level Of Detail”
Original Site Plan
Updated Site Plan
Scanner Details
17
Leica P20: 210 scan positions at JI Three minutes per scan
(not including set-up) Line-of-sight scanning Between 16 & 20 million
points per scan Survey Grade accuracy to
an eighth of an inch
Deliverables: Final IMP (native) size
• 135GB PTS file size
• 112GB, 12 files TruView data set
• 11.4GB
TruView
18
Point Cloud Tools
19
GIS & CAD
• Improve GIS feature accuracy
• Surface creation to look at settlement issues
• Consistency between GIS & CAD
20
Looking Ahead• South Shore Site Scan
• Import data to SDE
• Update PlantMan
• Test incorporating TruView into PlantMan
• Create Master CAD site drawing
21
QUESTIONS?
22