maxmotion pa series precision motion control card

7/29/2019 MaxMotion PA Series Precision Motion Control Card

1/8

SYSTEMS

P R E C I S I O N M O T I O N C O N T R O L C A R DMAXMOTION PA SERIES

DIGITAL SERVO CONTROLmulti-axis servo & stepper


2/8

PAGE 02

PBA Systems is an ISO certified company that designs and manufactures motioncontrol products, including linear motor modules, voice coil modules, piezo

stages, large XYZ Theta stages and other special customized solutions.

Founded in 1999, PBA Systems continuousl y aims for technological breakthroughs and innovations, working to deliver

the best products to our customers while providing excellent service and uncompromising quality standards. For

enquiries on any of our products, email us at [email protected] or call us at +65 6576 6767

501 83501501 853

818

the leader in linear motors

motor modules servo drives motion control cards

software encoders & cables mechanical design& fabrication

+ +

+ ++

= complete solution


3/8

PAGE 03

GLOBAL SUPPORT

MAKING IT GOOD & MAKING IT CHEAP

FAST REACTION & SHORT LEAD TIME

PBA SYSTEMS products are well covered with world-wide

distrbutors and local offices.

We are vertically integrated with factories in China that supply

the motor magnets.

South East Asian factories for machining and assembly.

We hold vast stocks of work in progress parts.

We are equipped to accomodate highly customised designs.

PBA staffs work around the clock to deliver goods on time.

BRANCH OFFICE

DISTRIBUTORS

global locations

USA

India

Israel

Italy

Switzerland

Germany

Korea

Indonesia

Singapore

Malaysia

ThailandPhilippines

Taiwan

China


4/8

We reserve the right to make technical changes at any time without prior notice

S P E C I F I C A T I O N S

PAGE 04

MM PA-40S-0 / MM PA-40S-B

The MaxMotion PA-40S-0 / PA-40S-B is designed for PC-based multi-axis motion control applications which require up to 4 axes of high

performance analog or PWM servo control. General-purpose digital I/O and optional analog inputs are also available with this model.

Compact, powerful and economical PCI-bus motion controller

Plug & Play half-length PCI-bus Universal card

64-bit floating point RISC CPU for superior performance, precision and dynamic range

Flexible FPGA-based I/O architecture

Up to 8 axes of high-performance closed-loop control

1-4 analog or PWM servo axes

Multi-axis coordinated motion - interpolation, contouring, spline, master/slave, gearing

Trapezoidal, S-curve and parabolic velocity profiles for smooth jerk-free motion

User selectable 1, 2 or 4 KHz PID-VAFF servo loop update rate each axis (up to 4 axes)

16-bit analog servo command outputs for superior precision20 million encoder counts/sec for high-speed/ high-resolution moves

On-the-fly changes in trajectory, direction and PID values

On-board multi-tasking and programmable interrupts free host PC for other tasks

Consistent real-time behavior: Performance remains as specified no matter which features or axes are enabled

Eight general-purpose 14-bit A/D input channels (optional)

60 user-assignable digital I/O channels

Encoder inputs include encoder-failure detection circuitry for improved machine safety

High-speed I/O for ultra-fast synchronization of motion and external events

Sub-microsecond position capture (latch) inputs

Encoder position compare (trigger) outputs (up to >1 MHz repeat rate)

Custom features and task-optimized performance enhancements available upon request

All I/O signals are differential or complementary twisted-pairs for superior noise immunity

Flexible and fully software configurable I/O - no need to set any hardware jumpers

Uses non-proprietary and widely-available low-cost SCSI cables & interconnect boards

Fully programmable in C/C++/C#, Delphi, LabVIEW, Visual Basic and easy-to-use on-board command languageDrivers for Windows 98/NT/2000/XP/Vista and Linux

Powerful and flexible software software API is compatible with Max Motion Series Control Cards

Includes a full suite of Windows installation, tuning, diagnostic and example programs with source code

Part Numbers

Part Number Analog and/or PWMServo Axes

(10 VDC) (Servo)

Step/Dir. or CW/CCWPulse Axes

(Stepper/Servo)

Encoder Channels(0-20 MHz)

Analog Inputs(14-bit)

MM PA-40S-0 4 0 4 0

MM PA-40S-B 4 0 4 8

M A K E S A D I F F E R E N C Ew w w . p b a s y s t e ms . c o m. s g

MaxMotion PA Series

Precision Motion Control Card Multi-axis Servo and Stepper


5/8


6/8

We reserve the right to make technical changes at any time without prior notice

S P E C I F I C A T I O N S

PAGE 06

MM PA-44S-0 / MM PA-44S-A / MM PA-44S-B / MM PA-44S-C

The MaxMotion PA-44S-0 / PA-44S-A / PA-44S-B / PA-44S-Cis designed for high-performance PC-based multi-axis motion controlapplications which require up to 4 axes of analog servo control and up to 4 axes of pulse stepper control. Optional encoder inputs for

closed-loop stepper or pulse-based servo control and general-purpose analog inputs are also available for this model.

Compact, powerful and economical PCI-bus motion controller

Plug & Play half-length PCI-bus Universal card

64-bit floating point RISC CPU for superior performance, precision and dynamic range

Flexible FPGA-based I/O architecture

Up to 8 axes of high-performance closed-loop control

1-4 analog or PWM servo axes

1-4 Step/Dir/CW/CCW pulse axes (for stepper motors or pulse-controlled servos)

Multi-axis coordinated motion - interpolation, contouring, spline, master/slave, gearing

Trapezoidal, S-curve and parabolic velocity profiles for smooth jerk-free motion

User selectable 1, 2 or 4 KHz PID-VAFF servo loop update rate each axis (up to 4 axes)

1 KHz PID-VAFF stepper closed-loop update rate each axis (up to 4 axes)16-bit analog servo command outputs for superior precision

20 million encoder counts/sec for high-speed/ high-resolution moves

5 MHz pulse outputs for high-speed microstepping

Open and closed-loop stepper control

On-the-fly changes in trajectory, direction and PID values

On-board multi-tasking and programmable interrupts free host PC for other tasks

Consistent real-time behavior: Performance remains as specified no matter which features or axes are enabled

Eight general-purpose 14-bit A/D input channels (optional)

60 user-assignable digital I/O channels

Encoder inputs include encoder-failure detection circuitry for improved machine safety

High-speed I/O for ultra-fast synchronization of motion and external events

Sub-microsecond position capture (latch) inputs

Encoder position compare (trigger) outputs (up to >1 MHz repeat rate)

Custom features and task-optimized performance enhancements available upon request

All I/O signals are differential or complementary twisted-pairs for superior noise immunityFlexible and fully software configurable I/O - no need to set any hardware jumpers

Uses non-proprietary and widely-available low-cost SCSI cables & interconnect boards

Fully programmable in C/C++/C#, Delphi, LabVIEW, Visual Basic and easy-to-use on-board command language

Drivers for Windows 98/NT/2000/XP/Vista and Linux

Powerful and flexible software software API is compatible with Max Motion Series Control Cards

Includes a full suite of Windows installation, tuning, diagnostic and example programs with source code

Part Numbers

Part Number Analog and/or PWM Axes(Servo)

Step/Dir. or CW/CCWPulse Axes

(Stepper/Servo)

Encoder Channels(0-20 MHz)

Analog Inputs(14-bit)

MM PA-44S-0 4 4 4 0

MM PA-44S-A 4 4 8 0

MM PA-44S-B 4 4 4 8MM PA-44S-C 4 4 8 8

M A K E S A D I F F E R E N C Ew w w . p b a s y s t e ms . c o m. s g

MaxMotion PA Series

Precision Motion Control Card Multi-axis Servo and Stepper


7/8


8/8

Catalogue PBA Systems 130513Every care has been taken to ensure the correctness of the information contained in the book but

no liability can be accepted for any errors or omissions.

Copyright reserved. This book or parts thereof may not be reproduced without our permission.

PBA GROUP

Manufacturing Plants

USA

KOREA

ISRAEL

SWITZERLAND

CHINA

TAIWAN

GERMANY

ITALY

DISTRIBUTORS

PBA (S) Pte Ltd

Headquarters

Address: PBA Buildin g, 505 Yishun

Industrial Park A, Singapore 768733

Tel: +(65) 6576-6766

Fax: +(65) 6576-6765

Email: [email protected]: www.pba.com.sg

PBA Solutions Pte Ltd



Tel: +(65) 6576-6776

Fax: +(65) 6576-6765

Email: [email protected]

Website: www.pbasolutions.com

PBA Systems Pte Ltd (601191)



Tel: +(65) 6576-6767

Fax: +(65) 6484-6768


Website: www.pbasystems.com.sg

PBA Technology Pte Ltd (QA251)



Tel: +(65) 6576-6760

Fax: +(65) 6576-6761


Website: www.pbatechnology.com

PBA Spindles Pte Ltd



Tel: +(65) 6576-6778

Fax: +(65) 6576-6782


Website: www.pba-spindles.com

PM-PBA Pte Ltd



Tel: +(65) 6576-6766

Fax: +(65) 6576-6765


SINGAPORE MALAYSIA

PBA Industries (M) Sdn Bhd

Address: No 12A, Ground Floor Aked

Esplanad, Jalan 14/155B

Bukit Jalil

Kuala Lumpur, Malaysia 57000

Tel: +(60) 03-8993-9101 / 9102 / 9103

Fax: +(60) 03-8993-9106


PBA System (M) Sdn Bhd

Address: No 12A, Ground Floor Aked

Esplanad, Jalan 14/155B

Bukit Jalil

Kuala Lumpur, Malaysia 57000

Tel: +(60) 03-8993-9105

Fax: +(60) 03-8993-9106


PBA Industries (PG) Sdn Bhd

Address: 17-2-5, Bayan Po int,

Medan Kampung Relau,

Penang, Malaysia 11900

Tel: +(60) 04-6427915 / 6452916

Fax: +(60) 04-6447434


PBA Advantech (M) Sdn Bhd

Address: No 26 & 28, Jalan PTP 1/4 ,

Taman Perindustrian Tasik Perdana,

Puchong, Selangor 47120

Tel: +(60) 03-8993-9101 / 9102 / 9103


PBA (S) Pte LtdPhilippines Rep Office:

Address: PBA Building, 50 5 Yishun


Tel: +(65) 6576-6766

Fax: +(65) 6576-6765Email: [email protected]: www.pbagroup.net

PHILIPPINES

TAIWAN

THAILAND

PBA Systems (Thailand) Co., Ltd.

Address: 234/118, Aso k-Dindaeng

Road, Huakwang, Bangkapi,

Bangkok, Thailand 10310

Tel: +(66) 2-641-4522 / 641-4523Fax: +(66) 2-614-4400

E-mail: [email protected]

International MagneticsTechnology Co., Ltd

Address: Nongkhae Industr ial Es tate

10/19 Soi SRDI Moo4,

Tambon Kokyae, Amphur Nongkae,

Saraburi, Thailand 18230

Tel: +(66) 3-637-4024

: 3562

Address: 6 -2 FL No. 35 , Min Chuan WestRoad, Taipei, Taiwan 104Tel: +(886) 2-2599-3558Fax: +(886) 2-2599-3042

HP: +(886) 982-090-501 / +(886)

938-030-774


PBA Systems Pte LtdAddress: Ace Hitech City 2-1504, 775,Gyeongin-Ro, Yeongdeungpo-Gu,Seoul, South KoreaTel: +(82) 2-3439-0070 / 71 / 7 2 / 73 / 74Fax: +(82) 2-3439-0080Email: [email protected]

KOREA

CHINA

Sales Office :

PBA Linear Motor Co. Ltd.

42A

407-A42 Xinghua Road, HuaChuangDa CentralBusiness Building,Block A, 407-ABaoan District, Shenzhen, China 518000Tel+(86) 755-216-77507Fax+(86) 755-216-77506

Representative Office :

42A

407-B42 Xinghua Road, HuaChuangDa CentralBusiness Building,Block A, 407-BBaoan District, Shenzhen, China 518000Tel+(86) 755-216-77507Fax+(86) 755-216-77506

Indonesia Rep: Mr. Raya Tjendrawasi

H/P: +(62) 816-4846-547


INDONESIA

INDIA

PBA (India) Engineering Services and

Supplies Private Limited

Address: 503, 5th Floor Shivai Pl aza,

Marol, Andheri East,

Mumbai, India 400 059

Tel: +(91) 22-401-58381

Fax: +(91) 22-401-58389


maxmotion pa series precision motion control card

Documents