micro/nanosystems technology - technische fakultät€¦ · (absorber pattern metal, cr typ....
TRANSCRIPT
![Page 1: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/1.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 1
Micro/Nanosystems Technology
Dr. Dirk Meyners
Prof. Wagner
![Page 2: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/2.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 2
UV - Lithography
Outline
- Lithography – Overview
- UV-Lithography
- Resolution Enhancement Techniques
- Electron Beam Lithography
- Patterning with Focused Ion Beam
![Page 3: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/3.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 3
Lithography - Overview
*
Thin Films
Implant
Diffusion Etch
Test/Sort
Polish
LithoPatterned
wafer
Lithography is at the Center of the Wafer Fabrication Process
![Page 4: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/4.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 4
Moore‘s Law
• Duplication of the complexity (number of circuits/transistors on a
chip) of integrated circuits every 2 years (exponentional growth)
[R. Zengerle, Mikrosystemtechnik, Lecture Notes]
![Page 5: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/5.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 5
Moore‘s Law
https://ourworldindata.org/wp-content/uploads/2013/05/Transistor-Count-over-time.png
![Page 6: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/6.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 6
Lithography - Overview
• Lithography is used to produce 2 1/2-D images using radiation
sensitive resist and controlled exposure to radiation.
• The most widely used form of lithography is photolithography using
light sensitive resist.
• UV-Lithography
• X-ray lithography
• Electron Beam Lithography
• Ion Beam Lithography
• Wave length λ of radiation limits achievable resolution. (resolution of
e- and ion-beam lithography limit by scattering)
De Broglie:mv
h
![Page 7: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/7.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 7
Lithography - Overview
Ten Basic Steps of
Lithography
1. Surface Preparation
2. Resist Application
3. Soft Bake
4. Alignment & Exposure
5. Develop
6. Hard Bake
7. Inspection
8. Etch
9. Resist Removal
10.Final Inspection
![Page 8: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/8.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 8
Lithography - Overview
Basic Steps of Lithography
Image source:
M. Madou, Lecture Notes, 2008
![Page 9: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/9.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 9
Lithography - Overview
Basic Steps of Lithography
Coat with resist
Expose
Develop
Transfer pattern
Strip resist
Etch Doping Deposit film
Resist
Substrate
Radiation
Mask
LIFT-OFF
Image source: R. Zengerle, lecture notes, Mikrosystemtechnik
![Page 10: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/10.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 10
• Alternative scheme:
Hard masks
(1) Structure transfer to
a deposited layer on
the substrate
(2) Patterned layer is
used as hard mask in
a second etching step
[R. Zengerle, Mikrosystemtechnik, lecture notes]
Lithography - Overview
Basic Steps of Lithography
![Page 11: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/11.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 11
Lithography - Overview
• A resist is a radiation sensitive polymer.
• patterned selectively
• resistant to following processing
Negative resist: Prints a pattern that is opposite of the pattern that is
on the mask.
Positive resist: Prints a pattern that is the same as the pattern on the
mask.
Image source:
R. Zengerle, lecture notes,
Mikrosystemtechnik
![Page 12: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/12.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 12
Lithography - Overview
• Negative lithography
Island
silicon substrate
oxide
photoresist
Window
Areas exposed to light become polymerized and resist the develop chemical.
Resulting pattern after the resist is developed.
photoresist
oxide
silicon substrate
Ultraviolet Light
Exposed area
of photoresist
Shadow on
photoresist
Chrome island
on glass mask
Image source:
M. Madou, Lecture Notes, 2008
![Page 13: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/13.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 13
Lithography - Overview
• Positive lithography
silicon substrate
oxide
photoresist
Island
Window
Areas exposed to light become soluble.
Resulting pattern after the resist is developed.
Shadow on
photoresist
Exposed area
of photoresist
Chrome island
on glass mask
photoresist
silicon substrate
oxide
Ultraviolet Light
Image source:
M. Madou, Lecture Notes, 2008
![Page 14: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/14.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 14
Lithography - Overview
• During exposure with UV-light the photo active compound
DiazoNaphtoQuinone- (DNQ-) sulfonate (left) separates a N2
molecule (middle), and converts into indene carboxylic acid (right)
requiring H2O. Compared to unexposed DNQsulfonate, the
carboxylic acid yields a resist development rate (alkaline solubility)
several orders of magnitude higher.
• quantum efficiency ≈ 20 .. 30 %
• backbone molecules (viscosity)
Example: (DNQ-) Reaction (positive)
λ λ
[www.microchemicals.eu]
![Page 15: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/15.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 15
UV - Lithography
Outline
- Lithography – Overview
- UV-Lithography
- Resolution Enhancement Techniques
- Electron Beam Lithography
- Patterning with Focused Ion Beam
![Page 16: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/16.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 16
1. Surface Preparation by Wafer Priming (HMDS)
• Adhesion of the resist is often insufficient on Si or SiO2
• HMDS as adhesion promoter
HMDS• Dehydration bake in enclosed
chamber with exhaust
• Clean and dry wafer surface
(hydrophobic)
• Hexamethyldisilazane (HMDS)
• Temp ~ 200 - 250°C
• Time ~ 60 sec
[M. Madou, Fundamentals of Microfabrication, Lecture Notes]
UV - Lithography
![Page 17: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/17.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 17
• unpolar methyl groups form
hydrophobic surface with
corresponding resist
wettability and adhesion
HMDS
(hexamethyldisilazane)
[M. Madou, Fundamentals
of Microfabrication, Lecture
Notes]
UV - Lithography
![Page 18: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/18.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 18
2. Resist Application
• Wafer or substrate are held
onto vacuum chuck
• Dispense few milliliters of
photoresist
• Slow spin ~ 500 rpm
• Ramp up to ~ 3000 - 5000
rpm
• Quality issues:
– thickness
– uniformity
– particles & defects
vacuum chuck
spindleto vacuum
pump
photoresist dispenser
UV - Lithography
![Page 19: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/19.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 19
UV - Lithography
• Resist thickness T depends on:
– Spin speed
– Solution concentration
– Molecular weight (measured by intrinsic viscosity)
• In the equation for T, K is a calibration constant, C the polymer
concentration in grams per 100 ml solution, h the intrinsic viscosity,
and w the number of rotations per minute (rpm)
• The equation can be used to predict the thickness of the resist that
can be spun for various molecular weights and solution
concentrations of a given polymer and solvent system
w
hcKT
![Page 20: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/20.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 20
Spin Coater
• Spin Coater OPTIspin ST22P
– Substrate size up to 8“
– Chucks for 4“, 6“, 8“ and
pieces
– spin speed up to 10,000 rpm
• Hot Plate
– HMDS Adhesion promoter
(C6H19NSi2)
– Temperature up to 200°
UV - Lithography
![Page 21: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/21.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 21
UV - Lithography
• Spin Coating
• Spray Coating
Image source:
M. Madou, Lecture Notes, 2008
![Page 22: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/22.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 22
UV - Lithography
• Partial evaporation of resist solvents
• Improves adhesion
• Improves uniformity
• Improves etch resistance
• Improves linewidth control
• Optimizes energy absorbance
characteristics of resist
3. Softbake
![Page 23: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/23.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 23
UV - Lithography
• Transfers the mask image to the resist-coated wafer
• Activates photo-sensitive components of photoresist
• Quality issues: – linewidth resolution– overlay accuracy– particles & defects
UV Light Source
Mask
Resist
4. Alignment & Exposure
![Page 24: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/24.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 24
Masks for optical Lithography:
Drawing with CAD
• Example for a mask
structure for microinductors
• Design the layout with
CAD-programms
UV - Lithography
![Page 25: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/25.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 25
• Quartz glass plate with
structured chromium layer
(absorber pattern metal, Cr
typ. thickness: 100 nm)
• Typical costs:
– 30 €/cm2 for structures
> 5 µm
– 75 €/cm2 for structures
1 - 5 µm
– masks for 4“ wafer
approx. 400 - 2.500 €
[R. Zengerle, Mikrosystemtechnik, Lecture Notes]
Masks for optical Lithography:
UV - Lithography
![Page 26: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/26.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 26
• deposit resist on chromium
coated quartz plate
• structure resist with
electron beam lithography
• develop resist
• wet etching of chromium
• resist removal
[R. Zengerle, Mikrosystemtechnik, Lecture Notes]
Fabrication of masks:
UV - Lithography
![Page 27: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/27.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 27
UV - Lithography
[M. Madou, Fundamentals of Microfabrication, Lecture Notes]
Shadow Projection
Printing techniques:
![Page 28: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/28.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 28
• Mask is pressed to the wafer/resist
→ in contact without gap
• (hard/soft) contact mode / vacuum
mode
+ structures in sub-μm range are
possible
+ minor failures at the pattern
transfer
– contamination of the mask
– defects by dirt particles
[R. Zengerle, Mikrosystemtechnik, Lecture Notes]
UV - Lithography
Contact printing:
![Page 29: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/29.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 29
• No direct contact between mask
and wafer/resist → proximity gap of
~ 30µm
+ less stress on the mask
+ higher lifetime of the mask
+ higher throughput
– lower resolution
[R. Zengerle, Mikrosystemtechnik, Lecture Notes]
UV - Lithography
Proximity printing:
![Page 30: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/30.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 30
• Downsizing of the mask structure by
objectives
• Step-by-step projection of the mask
structure on the wafer
• only one functional unit (e.g. chip) on the
wafer
+ enlarged masks easier in production:
• better to control
• cheaper production of masks (only
1 chip on the mask)
– equipment is expensive (lenses)
– low throughput
mirror
light source
filter
condenser lens
mask
objective
field of exposure
movable sample table
(step and repeat)
[R. Zengerle, Mikrosystemtechnik, Lecture Notes]
UV - Lithography
Projection printing:
![Page 31: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/31.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 31
• emission spectrum of a mask aligner with Hg light source contains
three lines
h-, i-line resist
g-, h-, i-line resist
Wavelength
Inte
nsity
[www.microchemicals.eu]
• the absorption
spectrum of the
photoresists is
matched to this Hg
emission spectrum.
• distinguish between
broadband sensitive
(g-, h-,and i-line)
photoresists, and
resists with a
absorption spectrum
more narrow
UV - Lithography
Ligth Source/Sensitivity of Resists:
![Page 32: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/32.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 32
UV - LithographyResolution in contact and proximity
printing:
The theoretical resolution R is
equal to the minimum resolved
dimension with a grating mask
(bmin for a line or a space).
It is limited by diffraction to:
22
3min
zsbR
bmin : half grating period
s: gap between mask
and photoresist
surface
z: resist thickness
![Page 33: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/33.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 33
UV - Lithography
Resolution in contact and proximity
printing:
Contact printing:
Typical values for a conventional system:
22
30
zRs
al)(theoretic 70
1
line)-(h 400
µm. R
µmz
nm
Proximity printing:
Typical values for a conventional system:
sRzs 2
3
al)(theoretic 4
20
line)-(h 400
µm R
µms
nm
![Page 34: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/34.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 34
• Resolution is influenced by:
– wavelength (diffraction)
– gaps between resist and mask
UV - Lithography
• Reasons for a gap between resist and chromium layer of the mask:
– particles in the resist caused by either insufficient cleanroom
conditions, contaminated substrates, or expired photoresist
– bubbles in the resist film caused during dispensing, or an
insufficient delay time after refilling/diluting/moving the resist
– mask contamination by particles, or resist (previous exposures)
– rough, structured or curved (strained) substrates
– an edge bead, or a mask attached upsidedown
![Page 35: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/35.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 35
Contributors to Non-Rectangular Wafer Pattern
• Lithography process variations:
– Lens aberration, misalignment, defocus, overexposure
• Sub-wavelength non-ideal optical effects due to
– Diffraction
• Those effects result in wafer pattern distortion:
– Line-end shortening, corner rounding, line-edge roughness
![Page 36: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/36.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 36
theore
tical m
ax.
resolu
tion (μ
m)
Light intensity distribution in a photo resist
film (cross section) with a - from top to
bottom- increasing gap between mask and
resist film.
[www.microchemicals.eu]
UV - Lithography
Resolution: gaps between resist and mask
resist thickness not considered
![Page 37: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/37.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 37
• Resolution is influenced by:
– wavelength (diffraction)
– gaps between resist and mask
– defects in the mask
– bleaching of the photoresist
– contrast
– optical substrate properties
absorp
tion
coeff
(1/
μm
)
[www.microchemicals.eu]
UV - Lithography
![Page 38: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/38.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 38
d/d
oof
the d
evelo
ped r
esis
t film
Log10 (exposure dose)
• The slope of the decay in the
contrast curve defines the
contrast
(remaining layer thickness d in
relation to the starting thickness d0)
UV - Lithography
Contrast:
high contrast
low contrast
DC (dose to clear) depends on
resist thickness, developer
concentration and development
time.
![Page 39: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/39.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 39
• UV-reflecting substrates (e.g.
metallized) increase the
absorbed light dose in the resist
near the substrate
• UV-transmissive substrates
(e.g. quartz, glass, thick SiO2 on
Si, transparent polymers)
laterally guide light along the
substrate, cause reflections
from the chuck and reduce the
lateral resolution
[www.microchemicals.eu]
UV - Lithography
Resolution: optical substrate properties
![Page 40: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/40.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 40
• wafer stage in a coventional mask aligner
[R. Zengerle, Mikrosystemtechnik, Lecture Notes]
UV - Lithography
Alignment:
![Page 41: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/41.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 41
• Pattern transfer using
several masks demands
the alignment with sub-µm
accuracy
– performance in a mask
aligner
– substrate is movable in
x, y and θ
– first mask aligned at the
flat
large scale production:
fully automatic alignment
and exposure
[R. Zengerle, Mikrosystemtechnik, Lecture Notes]
UV - Lithography
Alignment:
![Page 42: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/42.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 42
large scale production:
fully automatic alignment
and exposure
– subsequent masks are
aligned by means of
alignment markers
[R. Zengerle, Mikrosystemtechnik, Lecture Notes]
UV - Lithography
Alignment:
![Page 43: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/43.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 43
=
first mask second mask
[R. Zengerle, Mikrosystemtechnik, Lecture Notes]
UV - Lithography
Alignment:
![Page 44: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/44.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 44
mask 1 mask 2 mask 3
double exposure 1 + 2 multiple exposure 1 + 2 + 3
[R. Zengerle, Mikrosystemtechnik, Lecture Notes]
UV - Lithography
Alignment:
![Page 45: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/45.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 45
UV - Lithography
5 . Develop
Soluble areas of the resist are
dissolved by developer
chemical
• Visible patterns appear on wafer
– windows
– islands
• Quality issues:– line resolution– uniformity– particles & defects
vacuum chuck
spindle
developerdispenser
to vacuum pump
![Page 46: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/46.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 46
UV - Lithography
Photoresist profiles:
– Undercut (LIFT-OFF)
– Vertical
– Overcut Dose : High
Developer: Low
Dose : Medium
Developer: Moderate
Dose : Low
Developer: Dominant
![Page 47: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/47.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 47
substrate
resist
metal
Aim: Structuring metal without etch process
• structure the photoresist
• deposit metal (e.g. Pt) on the whole surface
• resolve the photoresist
– metal on resist is removed
– metal on substrate remains
• Inversion of the edge profile by image reversal technique enables the lift-off process
[R. Zengerle, Mikrosystemtechnik, Lecture Notes]
UV - Lithography
Lift-Off process:
![Page 48: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/48.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 48
• Double exposure of resist and chemical modification in between
→ positv resist behaves like high resolution negativ resist
solubleinsoluble
still
insoluble
solubleflood exposure
crosslinking
→ insoluble
1. Exposure 2. Temperature (~90°)
3. Exposure 4. Develop
[R. Zengerle, Mikrosystemtechnik, Lecture Notes]
UV - Lithography
Image reversal:
![Page 49: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/49.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 49
• Inversion of the edge profile
unexposed
exposed
Image Reversal
Standard Lithography
[R. Zengerle, Mikrosystemtechnik, Lecture Notes]
UV - Lithography
Image reversal:
![Page 50: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/50.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 50
• example for different
resists for different
applications and
thickness
[www.microchemicals.eu]
UV - Lithography
Photoresists:
![Page 51: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/51.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 51
• epoxy-based negativ resist
• layer thickness up to ~500µm (up to ~2mm
with several layers on top of each other)
• aspect ratio of 1:40 (high contrast of SU-8)
• high chemical resistance → application as
etching mask
[R. Zengerle, Mikrosystemtechnik, Lecture Notes]
–high volume shrinkage after postbake
–high stresses in large-scale structures
–handling more critical than for standard resists
UV - Lithography
SU-8 Technology:
![Page 52: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/52.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 52
UV - Lithography
6. Hard bake
• Evaporate remaining resist
• Improve adhesion
• Higher temperature than soft
bake
![Page 53: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/53.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 53
UV - Lithography
8. After inspection the pattern transfer is
performed, e.g. by etching
• Selective removal of upper layer of wafer through windows in resist:
subtractive• Two basic methods:
– wet acid etch
• Au with KI/I2• Si with HF
– dry plasma etch
• Reactive Ion Etching (RIE)
• Ion Beam Etching (IBE)• Quality issues:
– defects and particles– step height– selectivity
Alternatively• Adding materials (additive)• Two main techniques:
– Sputtering– evaporation
• Lift-Off
PlasmaPlasma
CF4CF4
![Page 54: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/54.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 54
UV - Lithography
9. Resist removal (strip)
• No need for resist in the following
preparation step
• Two common methods:
– wet removal with solvent (e.g.
aceton or N-methyl-2-pyrrolidone
(NMP))
– dry plasma etching with O2-
plasma
• Followed by wet clean to remove
remaining resist and strip byproducts
O2O2
PlasmaPlasma
![Page 55: Micro/Nanosystems Technology - Technische Fakultät€¦ · (absorber pattern metal, Cr typ. thickness: 100 nm) • Typical costs: – 30 €/cm2 for structures > 5 µm – 75 €/cm2](https://reader036.vdocuments.net/reader036/viewer/2022071104/5fdd8679a6faeb51e521bc56/html5/thumbnails/55.jpg)
Micro / Nanosystems TechnologyWagner / Meyners 55
UV - Lithography
10. Final inspection
• Resist has been completely removed
• Pattern on wafer matches mask pattern (positive resist)
• Quality issues:
– defects
– particles (cleanroom class)
– step height
– overlay accuracy
– critical dimensions