more than justpower -...
TRANSCRIPT
More than just power
Tyco Electronics Power Systems is
one of the market leaders of Power
Modules for applications such as
motor drives, power supplies, welding
equipment as well as Solid State
Relays for the automation market. With
24 different families of Power Modules
in a variety of sizes and configurations,
such as PIM modules (combined input
rectifier, six pack output inverter with
or without open emitters and brake
chopper), stand-alone six pack mod-
ules, PFC- and H-bridge modules, Tyco
Electronics serves a broad range from
5A to 100A at 600V and from 5A to
150A at 1200V. All modules have in
common an NTC for temperature sens-
ing. Tyco Electronics offers also two
fully electronic relays potted into two
standard relay housings.
By using modules, all components that generate heat losses are integrated in a singlemodule. Only the logic components, which induce low power dissipation, remain to beintegrated on the printed circuit board facilitating the control of the entire system. It isextremely important that all heat emitting components are coupled directly to the sys-tem heat sink, in particular for applications without fan or applications with completelyencapsulated housing. The temperature sensor, integrated in all modules, measuresthe current temperature of the module allowing to pinpoint a possible temperature rise,thus preventing sudden system breakdowns.
What Kind of Modules can Tyco Electronics offer?
All modules follow the unique “flow through” concept for easy integration into yoursystem with voltage blocks for functional routing. Four main blocks are identified:Negative voltage, input and BRC on one side; positive voltage, output and high sidegates on the opposite side.
Standard PIMs distinguish themselves through an intense power density and a highlevel of integration, most suitable for low power frequency converters. Tyco ElectronicsPIMs are available in three different housings covering a power range from 5A to 70Aat 600V and 5A to 75A at 1200V. All PIMs come with an input rectifier, an inverter sixpack, a brake chopper and an NTC for temperature sensing. A striking attribute of TycoElectronics smallest housing is its very fast and cost effective clip in assembly.
Inverter Six Pack Modules suitable in particular for motion control applications arecapable of handling currents up to 50A at 600V and 1200V. Their outstanding perfor-mance coupled with a low cost compact design is yet to be matched in the market.
Inverter Half Bridge Modules are designed for motor control applications requiringcurrents up to 150A at 1200V. The small size together with the innovative flow throughconcept allows a very compact and easy to implement six pack arrangement meetingtoday’s and tomorrows demand.
H-Bridge Modules for fast switching applications meet high requirements pertaining to component selection and package design. The usage of either MOSFETs with smallRdson or the fastest IGBTs available, allows Tyco Electronics to offer a broad variety of bridges for all kinds of switching modes (Hard Switching, Zero Voltage) to meet everyneed of the customer.
Tyco Electronics offers stand alone PFC modules as well as its standard PIM moduleswith an integrated PFC. The stand-alone PFC modules are comprised of a half controlledinput rectifier bridge limiting the inrush current and handling short circuits in the output.The built in low inductance capacitor allows to best short circuit high frequencies. PIMmodules with integrated PFC come with an HF capacitor for best EMC performanceand ultra fast switching transistors and diodes for the PFC functionality.
GOING MODULE
Ad
van
tag
es
Shunt Modules
In particular for servo and vector drives where current sensing in thephases sometimes is required for monitoring the drive position andmeasuring the load current, Tyco Electronics offers PIM modules with shunts for easy integration.
IPM Modules
Tyco Electronics offers a ultra compact, highly efficient intelligent powermodule with a power factor way in excess of 0.99. No external circuitis required. It has been designed to reduce the harmonic content ofthe input current of equipment fed by the public power grid. The circuitis based upon the traditional BOOST topology. With the extension of a half controlled input rectifier bridge it is capable of offering inrushcurrent and short circuit protection for the equipment connected tothe output.
To keep the ball rolling, Tyco Electronics has devoted extensiveresources in the development of new modules with a strong focus onnew technologies to even better serve its customers’ needs in thefuture.
Application Note: IMC Driver Board
Control of 3~ asynchronous motor with U/F characteristics, where themicro controller integrated on the driver board via logic signals takesover the control of the high performance IGBT modules made by TycoElectronics. With this device an economical system can be realizedfor the control of three phase systems.
Available Module Packages:
■ flow 0, flow 1, flow 2, flat 1
Advantages of Power Modules:
■ Integration of all active electronic power components■ High voltage isolation■ Optimal mechanical and thermal interconnection■ Protection against environment■ Meet international standards (UL)■ Compact module size■ Flow through concept■ Short gate connections
10 11 16 12 13 14 15
7 6 1 5 4 3 2 8 9
flowPACK 0
Part-No
V23990-P361-F 600V 5AV23990-P362-F 600V 10AV23990-P363-F 600V 15AV23990-P364-F 600V 20AV23990-P365-F 600V 30AV23990-P366-F 1200V 10AV23990-P367-F 1200V 15AV23990-P360-F 1200V 25A
vo
ltag
e
cu
rren
t
flowPHASE 0
Part-No
V23990-P567-F10 1200V 50A V23990-P568-F10 1200V 75A V23990-P569-F10 1200V 100AV23990-P569-F 1200V 100A V23990-P560-F 1200V 150A
vo
ltag
e
cu
rren
t
flowPACK 1
Part-No
V23990-P434-F 600V 30AV23990-P436-F 600V 50AV23990-P438-F 1200V 25AV23990-P439-F 1200V 35AV23990-P430-F 1200V 50A
vo
ltag
e
cu
rren
t
15 16 1 19 20 23 24 12
8 7 2 6 5 4 3 11 10 9
14
13
18
17
22
21
flowPIM® 2
Part-No
V23990-P185-A10 600V 50A V23990-P186-A10 600V 75A V23990-P188-A10 1200V 25AV23990-P189-A10 1200V 35AV23990-P180-A10 1200V 50A V23990-P188-A20 1200V 35A V23990-P189-A20 1200V 50A V23990-P180-A20 1200V 75A
vo
ltag
e
cu
rren
t
5 2 1 16 13 9 15 12 14 11 17 18
3 37 7 23 25 28 21 26 29 19 27 30
4 8 24 22 20
363432
353331
6 10
5 – 8
1 – 4
910
11 – 16
1718
PRODUCT OVERVIEW
Motor Drives:
19 20 18 13 12 15 14 17 16
3 4 5 10 11 8 9 6 7 1 2
212223
22 23 24 25 13 14 15
3 11 12 2
4 6
1876
2120
1918
1716
9 10
flowPIM® 1
Part-No
V23990-P81-A20 600V 5AV23990-P82-A20 600V 8AV23990-P83-A20 600V 10AV23990-P84-A20 600V 15AV23990-P85-A20 600V 20AV23990-P86-A20 600V 30AV23990-P89-A20 1200V 10AV23990-P80-A20 1200V 15AV23990-P481-A 600V 5AV23990-P482-A 600V 8AV23990-P483-A 600V 10AV23990-P484-A 600V 15AV23990-P485-A 600V 20AV23990-P486-A 600V 30AV23990-P487-A 1200V 10AV23990-P488-A 1200V 15AV23990-P480-A 1200V 25A
vo
ltag
e
cu
rren
t
flowPIM® 0
Part-No
V23990-P541-A 600V 5AV23990-P542-A 600V 7AV23990-P543-A 600V 10AV23990-P544-A 600V 15AV23990-P545-A 600V 20AV23990-P549-A 1200V 10AV23990-P540-A 1200V 15A
vo
ltag
e
cu
rren
t
flowPIM® 1 2nd generation
Part-No
V23990-P584-A 600V 20A V23990-P585-A 600V 30A V23990-P586-A 600V 50A V23990-P588-A 1200V 15A V23990-P589-A 1200V 25A V23990-P580-A 1200V 35A
vo
ltag
e
cu
rren
t
4
31
3 1 32 17 18 16 14 15 13 11 12 10
5 9 8 6 7 19 21 20 22 24 23 25 27 26
282930
2
17 11 10 16 13 12 15 14
1 8 9 6 7 4 5 2 3
181920
flowPIM® 0+E
Part-No
V23990-P441-C 600V 5AV23990-P442-C 600V 7AV23990-P443-C 600V 10AV23990-P444-C 600V 15AV23990-P445-C 600V 20AV23990-P449-C 1200V 10AV23990-P440-C 1200V 15A
vo
ltag
e
cu
rren
t
All m
od
ule
s h
ave i
n c
om
mo
n a
n N
TC
fo
r te
mp
era
ture
sen
sin
g.
flowPIM® 1+S
Part-No
V23990-P321-A 600V 5AV23990-P322-A 600V 8AV23990-P323-A 600V 10AV23990-P324-A 600V 15AV23990-P325-A 600V 20AV23990-P329-A 1200V 10AV23990-P320-A 1200V 15A
vo
ltag
e
cu
rren
t
17 13 19 18 23 27
10 6 5 12 11 7 8 9 4 3 2 1
161514
21
22 20
25
26 24
29
30 28
flowPIM® 1+P
Part-No
V23990-P303-B 600V 10AV23990-P304-B 600V 15AV23990-P305-B 600V 20A
vo
ltag
e
cu
rren
t
27 2 1 26 25 18 20 22
5 7 6 8 15 16 13 14 11 12
28
29
24 23
1719
21
3 4 9 10
1 6 7 2 3 4 5 8 9 10 11 12 13 15 14
25 24 23 17 16 22 19 18 21 20
20
21
flowPIM® 0+P
Part-No
V23990-P371-B 600V 4AV23990-P372-B 600V 6AV23990-P370-B 600V 10A
vo
ltag
e
cu
rren
t
5 6 13 24 25 26 12 11
7 8 19 20 21 18 17 16 9 10
1415
2223
1234
Part-No
V23990-P381-A 600V 12AV23990-P382-A 600V 20AV23990-P380-A 600V 30AV23990-P380-D21 600V 35AV23990-P385-A11 600V 20AV23990-P386-A11 600V 30AV23990-P387-A11 600V 40A
cu
rren
t
17 16 15 14 13 12
8
7
10
11
18
19
3 1 2 4 5 6 9
flowPFC 0
Part-No
V23990-P401-D01 500V 2.5kW V23990-P401-D 500V 4.5kW
vo
ltag
e
po
wer2
17 18 3 16 2 1
11 12 13 8 7 6 9 10
141545fastPACK 0 H
Part-No
V23990-P501-F 600V 15AV23990-P501-F01 600V 15AV23990-P502-F 600V 20AV23990-P502-F01 600V 20AV23990-P503-F 600V 30AV23990-P503-F01 600V 30AV23990-P500-F 600V 35AV23990-P500-F01 600V 35A
Part-No: -F
Part-No: -F01
vo
ltag
e
cu
rren
t
fastPIM 1 H
vo
ltag
e
CoutVout
PVCcontroller
Vin
Surge andovercurrent
control
17 18 3 16
13 8 7 6 9 10
141545
PFC-IPM
Part-No
V23990-P411-D 230V 1.0kW
Inp
. vo
lt-
po
wer2
Power Factor Correction:
Fast switching > 50 kHz
Tyco Electronics Power SystemsRupert-Mayer-Strasse 4481359 Munich, GermanyTel.: +49 89 722-28457Fax.: +49 89 722-32936
http://em.tycoelectronics.com
e-mail: [email protected] Cop
yrig
ht ©
200
4,
Tyco
Ele
ctro
nics
, Ray
chem
Gm
bH, P
ower
Sys
tem
s · P
rinte
d in
Hun
gary
· TE
C.P
S-0
23-1
004.
5-E
Housing Dimensions
height*: 17 mmwidth: 66 mmdepth: 32,5 mm
height*: 17,2 mmwidth: 82 mmdepth: 37,4 mm
height*: 17 mmwidth: 107,2 mmdepth: 47 mm
height*: 25 mmwidth: 80 mmdepth: 70 mm
*Height equals to installation height
The information provided herein is believed to be reliable at press time. Tyco Electronics assumes no responsibilityfor inaccuracies or omis-sions. Tyco Electronics assumesno responsibility for the use of this information, and allsuch information shall be entirely at the users own risk.Prices and specifications are subject to change withoutnotice. Tyco Electronics does not authorize or warrant anyof its products for use in life-support devices and / orsystems.
flowPIM® is a trademark of Tyco Electronics
ISO TS 16949 in Vorbereitung
flow 0
flow 1
flow 2
PFC-IPM
Technical data:
W Up to 5 kW mechanical motor power (Th = 80°C, incl. 150% overload)
W 3 phase Input Rectifier W 3 phase IGBT Inverter + FRED with open emitter W Brake ChopperW UL-HousingW Clip In: The reliable interconnection between PCB and moduleW Alternative screw or clip mounting of heatsinkW Latest chip generation – trench field stop technology
Co
pyr
igh
t ©
200
5,
Tyco
Ele
ctro
nic
s, R
aych
em G
mb
H, P
ow
er S
yste
ms
· Pri
nte
d in
Hu
ng
ary
· TE
C.P
S-0
11-0
805.
2-E
flow90PIM 1
Smart Layout for Your PCB
More and more of today's motor drive inverters require the heatsink to be in an up right position in respect to the PCB. For this kind of inverters Tyco Electronics introduces an innovative Power Module package with 90° mounting angle. This new package provides following benefits in addition to standard Power Module.
Part-No voltage current
V23990-P631-A 600 V 6 AV23990-P632-A 600 V 10 AV23990-P633-A 600 V 15 AV23990-P634-A 600 V 20 AV23990-P635-A 600 V 30 AV23990-P639-A 1200 V 8 AV23990-P630-A 1200 V 15 A
The information provided herein is believed to be re-liable at press time. Tyco Electronics, Power Systemsassumes no responsibility for inaccuracies or omis-sions. Tyco Electronics, Power Systems assumes noresponsibility for the use of this information, and allsuch information shall be entirely at the users ownrisk. Prices and specifications are subject to changewithout notice. Tyco Electronics, Power Systemsdoes not authorize or warrant any of its products foruse in life-support devices and / or systems.
Tyco Electronics
Power Systems
Finsinger Feld 185521 Ottobrunn, GermanyTel.: +49 (0)89 6089-830Fax: +49 (0)89 6089-833www.em.tycoelectronics.comem.customerservice@tycoelectronics.com
flowPIM 0+E 2nd generation
Part-No voltage current
V23990-P441-C20 600 V 6 AV23990-P443-C20 600 V 10 AV23990-P444-C20 600 V 15 AV23990-P445-C20 600 V 20 AV23990-P446-C20 600 V 30 AV23990-P449-C20 1200 V 8 AV23990-P440-C20 1200 V 15 A
flowPIM 0 2nd generation
Part-No voltage current
V23990-P541-A20 600 V 6 AV23990-P543-A20 600 V 10 AV23990-P544-A20 600 V 15 AV23990-P545-A20 600 V 20 AV23990-P546-A20 600 V 30 AV23990-P549-A20 1200 V 8 AV23990-P540-A20 1200 V 15 A
Technical data:
W 3 phase Input RectifierW 3 phase IGBT Inverter + FRED with open emitterW NTCW Latest chip generation – trench field stop technologyW Clip In: The reliable interconnection between PCB, module and heatsink
Technical data:
W 3 phase Input RectifierW 3 phase IGBT Inverter + FRED with open emitterW Brake ChopperW NTCW Latest chip generation – trench field stop technologyW Clip In: The reliable interconnection between PCB, module and heatsink
Technical data:
W Half BridgeW Low loss Trench IGBT technologyW Up to 300 A / 1200 VW Improved isolationW Improved shock and vibration capability
by reinforced terminals W Pin compatible with industry standard
(connector version)W Robust soldered gate contact for corrosive
environment
Housing dimensions:
Height: 25.8 mm / Width: 114.8 mm / Depth: 64 mm
Co
pyr
igh
t ©
200
5,
Tyco
Ele
ctro
nic
s, R
aych
em G
mb
H, P
ow
er S
yste
ms
· Pri
nte
d in
Hu
ng
ary
· TE
C.P
S-0
10-0
805.
2-E
flowPHASE 2
Take the Power you Need
Part-No voltage current
V23990-P610-F 1200 V 300 AV23990-P619-F 1200 V 200 A
Technical data:
W Half Bridge W Low loss Trench IGBT technology W Power Flow Through for simple PCB routingW Low inductive designW Clip In: The reliable interconnection between PCB,
module and heatsink
flowPHASE 0
Part-No voltage current
V23990-P562-F10 600 V 75 AV23990-P563-F10 600 V 100 AV23990-P564-F10 600 V 150 AV23990-P565-F10 600 V 200 AV23990-P565-F 600 V 200 A *V23990-P567-F10 1200 V 50 AV23990-P568-F10 1200 V 75 AV23990-P569-F10 1200 V 100 A **V23990-P569-F 1200 V 100 A */*** V23990-P560-F 1200 V 150 A *
* Improved thermal resistance ** Max 25 HP / 29.41 kW at 150% over load factor*** Max 45 HP / 29.41 kW at 150% over load factor
The information provided herein is believed to be re-liable at press time. Tyco Electronics, Power Systemsassumes no responsibility for inaccuracies or omis-sions. Tyco Electronics, Power Systems assumes noresponsibility for the use of this information, and allsuch information shall be entirely at the users ownrisk. Prices and specifications are subject to changewithout notice. Tyco Electronics, Power Systemsdoes not authorize or warrant any of its products foruse in life-support devices and / or systems.
Technical data:
W Half BridgeW High speed IGBT for up to ca. 50 kHz (ZVS) / 25 kHz (hard switched)W Power Flow Through for simple PCB routingW Low inductive designW Clip In: The reliable interconnection between PCB,
module and heatsink
fastPHASE 0
Part-No voltage current
V23990-P569-F20 1200 V 100 A*V23990-P569-F21 1200 V 100 A**V23990-P569-F30 1200 V 100 A***V23990-P569-F31 1200 V 100 A****
Technical data:
W H-BridgeW Ca. 10 kW (ZVS) at 50 kHzW Ultra low inductive designW Paralleling possibleW Power Flow Through for simple PCB routingW Clip In: The reliable interconnection between PCB,
module and heatsink
fastPACK 0 H 2nd generation
Part-No voltage current
V23990-P623-F 600 V 60 A*V23990-P623-F01 600 V 60 A**V23990-P623-F10 600 V 60 A***V23990-P623-F11 600 V 60 A****
Technical data:
W Modular Input Rectifier & BRC-circuit for 30 kW motor drive
W Compatible with 3 x flowPHASE 0W Power Flow Through for simple PCB routingW Additional power level up to 150 A upon requestW Clip In: The reliable interconnection between PCB,
module and heatsink
flowCON 2 – flowCON 0 1B
Part-No voltage current
V23990-P590-J 1200 V 105 AV23990-P600-I 1200 V 105 AV23990-P590-J10 1200 V 78 A *V23990-P600-I10 1200 V 78 A *
Tyco Electronics
Power Systems
Finsinger Feld 185521 Ottobrunn, GermanyTel.: +49 (0)89 6089-830Fax: +49 (0)89 6089-833www.em.tycoelectronics.comem.customerservice@tycoelectronics.com
P590-J P600-I
P590-J10 P600-I10
* optimized for ZVS** optimized for Hard Switching*** reduced Rth, optimized for ZVS**** reduced Rth, optimized for Hard Switching
* reduced Rth, without capacitor** reduced Rth, with capacitor*** without capacitor**** with capacitor
* half controlled bridge
Technical data:
W 3 phase IGBT InverterW Gate Driver W 3 phase current sensing W DC Bus-voltage sensingW Temperature sensorW Power supply for drive and control circuit W Save isolation of all logic signals
Housing dimensions:
Height: 19.9 mm / Width: 98.7 mm / Depth: 97 mm
Co
pyr
igh
t ©
200
5,
Tyco
Ele
ctro
nic
s, R
aych
em G
mb
H, P
ow
er S
yste
ms
· Pri
nte
d in
Hu
ng
ary
· TE
C.P
S-0
12-0
805.
2-E
flyerIPM
All Inclusive Package
The information provided herein is believed to be re-liable at press time. Tyco Electronics, Power Systemsassumes no responsibility for inaccuracies or omis-sions. Tyco Electronics, Power Systems assumes noresponsibility for the use of this information, and allsuch information shall be entirely at the users ownrisk. Prices and specifications are subject to changewithout notice. Tyco Electronics, Power Systemsdoes not authorize or warrant any of its products foruse in life-support devices and / or systems.
Integrated Power Block – combining a ceramic substrate with power dice and a PCB with drive and logic components on a common metal base plate.
Part-No voltage current
V23990-P520-A 1200 V 25 A
Iso Vcc1
InsulatedVoltage
Amplifier
Iso Vcc
Iso Vcc2
Iso Vcc3DC-DC
DC+
DC–
InsulatedGatedrive
Iso
Vcc
Iso
Vcc1
Iso
Vcc
Iso
Vcc2
Iso
Vcc
Iso
Vcc3
Iso
Vcc
Iso
Vcc1
Iso
Vcc2
Iso
Vcc3
Sixpack + shunts on DBC
InsulatedGatedrive
IsolationCurrent
Amplifier
InsulatedGatedrive
InsulatedGatedrive
InsulatedGatedrive
InsulatedGatedrive
IsolationCurrent
Amplifier
IsolationCurrent
Amplifier
NTC1 NTC2 DCS HU LU HV LV HW LW IU IV IW
NTC Output DC Link Sense 6 x PWM Current Sense Outputs
SAFETYISOLATION
U
V
W
DC
ext.
DC
ext.
DC
ext.
DC
ext.
Tyco Electronics
Power Systems
Finsinger Feld 185521 Ottobrunn, GermanyTel.: +49 (0)89 6089-830Fax: +49 (0)89 6089-833www.em.tycoelectronics.comem.customerservice@tycoelectronics.com
press on – screw down – ready
MiniSKiiP® II. 3 - PIM
Part-No
V23990-K249-A SKiiP 35 NAB 126 V1 1200V 50A Picture 1V23990-K240-A SKiiP 36 NAB 126 V1 1200V 70A Picture 1
SEMIKRON Equivalent
Voltage Current Schematic
The MiniSKiiP® products provide solder less connection to the PCB enabling fast and easy mounting. With the 2nd generation the power levels per given footprint have been further increased. The MiniSKiiP® series nowcovers a current range from 8 to 50A at 600V and 8 to 70A at 1200V in various configurations.
MiniSKiiP® I. 3 - PIM
Part-No
V23990-K136-A SkiiP 31 NAB 063 600V 32A Picture 1V23990-K137-A SkiiP 32 NAB 063 600V 57A Picture 1V23990-K138-A SkiiP 30 NAB 12 1200V 22A Picture 1V23990-K139-A SkiiP 31 NAB 12 1200V 30A Picture 1V23990-K130-A SkiiP 32 NAB 12 120 V 45A Picture 1
V23990-K187-C SKiiP 31 NAC 063 600V 35A Picture 2V23990-K188-C SKiiP 32 NAC 063 600V 50A Picture 2V23990-K189-C SKiiP 31 NAC 12 1200V 30A Picture 2V23990-K180-C SKiiP 32 NAC 12 1200V 45A Picture 2
SEMIKRONEquivalent
Voltage Current Schematic
MiniSKiiP® II. 1 - PIM
Part-No
V23990-K209-A01 SKiiP 11 NAB 126 V1 1200V 8A Picture 1V23990-K200-A01 SKiiP 12 NAB 126 V1 1200V 15A Picture 1
SEMIKRONEquivalent
Voltage Current Schematic
MiniSKiiP® I. 1 - PIM
Part-No
V23990-K108-A SkiiP 10 NAB 063 600V 8A Picture 1V23990-K109-A SkiiP 11 NAB 063 600V 10A Picture 1
V23990-K150-C10 SKiiP 11 NAC 063 I 600V 12A Picture 3with Option 2
SEMIKRONEquivalent
Voltage Current Schematic
height*: 16 mmwidth: 82 mmdepth: 59 mm
height*: 16 mmwidth: 82 mmdepth: 59 mm
height*: 16 mmwidth: 42 mmdepth: 40 mm
height*: 16 mmwidth: 42 mmdepth: 40 mm
*Height equals to installation height
Co
pyr
igh
t ©
200
4,
Tyco
Ele
ctro
nic
s, R
aych
em G
mb
H, P
ow
er S
yste
ms
· Pri
nte
d in
Ger
man
y · T
EC
.PS
-024
-100
4.5-
E
Tyco Electronics
Power Systems
Finsinger Feld 185521 Ottobrunn, GermanyTel.: +49 (0)89 6089 - 830Fax: +49 (0)89 6089 - 833http://www.em.tycoelectronics.com [email protected]
The information provided herein is believed to be reliable at press time. Tyco Electronics assumes no responsibilityfor inaccuracies or omis-sions. Tyco Electronics assumesno responsibility for the use of this information, and allsuch information shall be entirely at the users own risk.Prices and specifications are subject to change withoutnotice. Tyco Electronics does not authorize or warrant anyof its products for use in life-support devices and / orsystems.
*Height equals to installation heightMiniSKiiP® is a trademark of SEMIKRON
MiniSKiiP® I. 2 - PIM
Part-No
V23990-K127-A SkiiP 21 NAB 063 600V 19A Picture 1V23990-K127-A10 SkiiP 21 NAB 063 600V 19A Picture 3 with Option 1,2,3V23990-K128-A SkiiP 22 NAB 063 600V 21A Picture 1V23990-K128-A10 - 600V 21A Picture 3 with Option 1,2,3V23990-K129-A SkiiP 20 NAB 12 1200V 11A Picture 1V23990-K129-A10 SkiiP 20 NAB 12 1200V 11A Picture 3 with Option 1,2,3V23990-K120-A SkiiP 22 NAB 12 1200V 15A Picture 1V23990-K120-A10 SkiiP 22 NAB 12 1200V 15A Picture 3 with Option 1,2,3
V23990-K167-C10 SKiiP 20 NAC 063 600V 15A Picture 3 with Option 3V23990-K168-C10 SKiiP 22 NAC 063 600V 25A Picture 3 with Option 3V23990-K169-C10 SKiiP 20 NAC 12 1200V 11A Picture 3 with Option 2,3V23990-K160-C10 SKiiP 22 NAC 12 1200V 15A Picture 3 with Option 3
Voltage Current Schematic
MiniSKiiP® II. 2 - PIM
Part-No
V23990-K229-A01 SKiiP 23 NAB 126 V1 1200V 25A Picture 1V23990-K220-A01 SKiiP 24 NAB 126 V1 1200V 35A Picture 1
SEMIKRONEquivalent
Voltage Current Schematic
Option 3
Option 1
Option 2
Picture 1 Picture 2
Picture 3
SEMIKRONEquivalent
height*: 16 mmwidth: 59 mmdepth: 52 mm
height*: 16 mmwidth: 59 mmdepth: 42 mm
Co
pyr
igh
t ©
200
4,
Tyco
Ele
ctro
nic
s, R
aych
em G
mb
H, P
ow
er S
yste
ms
· Pri
nte
d in
Ger
man
y · T
EC
.PS
-026
-100
4.5-
E
Tyco Electronics
Power Systems
Finsinger Feld 185521 Ottobrunn, GermanyTel.: +49 (0)89 6089 - 830Fax: +49 (0)89 6089 - 833http://www.em.tycoelectronics.com [email protected]
press on – screw down – ready
The MiniSKiiP® products provide solder less connection to the PCB enabling fast and easy mounting. With the 2nd generation the power levels per given footprint have been further increased. The MiniSKiiP® series nowcovers a current range from 8 to 50A at 600V and 8 to 70A at 1200V in various configurations.
MiniSKiiP® II. 2 - sixpack
Part-No
V23990-K238-F SKiiP 24 AC 126 V1 1200V 35AV23990-K239-F SKiiP 25 AC 126 V1 1200V 50AV23990-K230-F SKiiP 26 AC 126 V1 1200V 70A
SEMIKRON Equivalent
Voltage Current
MiniSKiiP® II. 1 - sixpack
Part-No
V23990-K218-F SKiiP 11 AC 126 V1 1200V 8AV23990-K219-F SKiiP 12 AC 126 V1 1200V 15AV23990-K210-F SKiiP 13 AC 126 V1 1200V 25A
SEMIKRONEquivalent
Voltage Current
MiniSKiiP® I. 1 - sixpack
Part-No
V23990-K116-F - 600V 25AV23990-K117-F - 600V 45AV23990-K118-F SkiiP 23 AC 12 1200V 25AV23990-K119-F - 1200V 30AV23990-K110-F SkiiP 25 AC 12 1200V 40A
SEMIKRONEquivalent
Voltage Current
height*: 16 mmwidth: 59 mmdepth: 52 mm
height*: 16 mmwidth: 42 mmdepth: 40 mm
height*: 16 mmwidth: 42 mmdepth: 40 mm
The information provided herein is believed to be reliable at press time. Tyco Electronics assumes no responsibilityfor inaccuracies or omis-sions. Tyco Electronics assumesno responsibility for the use of this information, and allsuch information shall be entirely at the users own risk.Prices and specifications are subject to change withoutnotice. Tyco Electronics does not authorize or warrant anyof its products for use in life-support devices and / orsystems.
*Height equals to installation heightMiniSKiiP® is a trademark of SEMIKRON
*Height equals to installation height