multi channel av receiver › electronics › support › res › ...guía de instalación es before...

STR-ZA5000ES

MULTI CHANNEL AV RECEIVER

Installation Guide US

Guide d’installation FR

Guía de instalación ES

Before installing the receiver, be sure to update the receiver to the latest software version.

Avant d’installer l’ampli-tuner, veillez à le mettre à jour à la dernière version de logiciel.

Antes de instalar el receptor, asegúrese de actualizar el receptor a la versión de software más reciente.

2GB

Map of GUI Menu System

Using the home menu

Menu items underlined are default settings.

HomeWatch BD/DVD

SAT/CATVGAMESTBVIDEOTV

Listen AUXSA‐CD/CDFM TUNERAM TUNER

Custom Preset MovieMusicPartyNight

Sound Effects Sound Field 2ch StereoDirectAuto Format DecodingDolby SurroundNeural:XMulti Stereo

EqualizerSound Optimizer Normal

LowOff

In‐Ceiling Speaker Mode Front & CenterFrontOff

Pure Direct OnOff

3GB

Zone Controls Zone2 Power OnOff

Zone2 Input SOURCEBD/DVDSAT/CATVGAMESTBVIDEOAUXTVSA-CD/CDFM TUNERAM TUNER

Zone2 Volume (+23.0dB, +22.5dB, …, –40.0dB, …, –92.0dB, –∞dB)

Zone3 Power OnOff

Zone3 Input SOURCEVIDEOAUXTVSA-CD/CDFM TUNERAM TUNER


4GB

Setup Input Setup*1 *2 IconNameWatch/ListenShow/HideHDMIOPTICAL/COAXIALCOMPONENTVIDEO INAUDIO INInput ModePreset Sound FieldIn-Ceiling Speaker ModeA/V SyncSubwoofer Low Pass FilterSubwoofer LevelPreset Gain LevelTrigger 1Trigger 2Trigger 3

Speaker Setup Auto Calibration*3Automatic Phase Matching (Auto, Off)Calibration Type (Full Flat, Engineer, Front Reference, Off)Speaker PatternSpeaker ConnectionsSB Speaker Assign (Zone2, Bi-Amp, Front B, Off)Height1 SP Assign (Zone2, Off)Size*4 (Large, Small)Distance*4 (32 ft 9 in, 32 ft 8 in, …, 9 ft 10 in, …,

6 ft 7 in, 6 ft 6 in)Level*4 (+10.0dB, +9.5dB, …, 0.0dB, …, –9.5dB,

–10.0dB)Test Tone*3Crossover Frequency*4 (40Hz, 50Hz, …, 120Hz, …, 190Hz, 200Hz)Equalizer*4 (+10.0dB, +9.0dB, …, 0.0dB, …, –9.0dB,

–10.0dB)Center Speaker Lift Up (10, 9, 8, …, 2, 1, Off)Surround Speaker Position (Front, Back)Speaker Relocation (Type A, Type B, Off)Ceiling Height (32 ft 9 in, 32 ft 8 in, …, 9 ft 0 in, …,

6 ft 7 in, 6 ft 6 in)Speaker Impedance (8Ω, 4Ω)Distance Unit (feet, meter)

Network Setup Internet Setup*3Information*3Network Standby (On, Off)Music Connect Device1 Connected Device

Input for Music Connect1

Preset VolumeOutput Zone

Device2 Connected DeviceInput for Music Connect2Preset VolumeOutput Zone

5GB

Setup Audio Setup Digital Legato Linear (Auto 1, Auto 2, Off)Sound Optimizer (Normal, Low, Off)Sound Field*3In-Ceiling Speaker Mode (Front & Center, Front, Off)Pure Direct (On, Off)Subwoofer Low Pass Filter (On, Off)A/V Sync (300 ms, 290 ms, …, 10 ms, 0 ms,

HDMI Auto)Dual Mono (Main, Sub, Main/Sub)Dynamic Range Compressor

(Auto, On, Off)

Neural:X (On, Off)

HDMI Setup 4K Scaling (Auto, Off)Control for HDMI (On, Off)Standby Linked to TV (Auto, On, Off)Audio Return Channel (On, Off)Pass Through (Auto, On, Off)Audio Out (AMP, TV+AMP)Zone2 Audio Out (AMP, Zone2 TV+AMP, Zone2 AMP)Subwoofer Level (Auto, +10dB, 0dB)HDMI Out B Mode (Main, Zone2)Priority (Main&Zone2, Main Only)Fast View (Auto, Off)HDMI Signal Format HDMI IN 1 (Standard format,

Enhanced format)HDMI IN 2 (Standard format,




Enhanced format)

Zone Setup Zone Controls Zone2 Power (On, Off)Zone2 Input (SOURCE, BD/DVD, …,

FM TUNER, AM TUNER)


Zone3 Power (On, Off)Zone3 Input (SOURCE, VIDEO, …,

FM TUNER, AM TUNER)Zone3 Volume (+23.0dB, +22.5dB, …,

–40.0dB, …, –92.0dB, –∞dB)

Main Preset Volume (+23.0dB, +22.5dB, …, –92.0dB, –∞dB, Off)Main Max Volume (+23.0dB, +22.5dB, ..., –40.0dB)Zone2 Preset Volume (+23.0dB, +22.5dB, …, –92.0dB, –∞dB, Off)Zone2 Max Volume (+23.0dB, +22.5dB, ..., –40.0dB)Zone2 Line Out (Variable, Fixed)Zone3 Preset Volume (+23.0dB, +22.5dB, …, –92.0dB, –∞dB, Off)Zone3 Max Volume (+23.0dB, +22.5dB, ..., –40.0dB)Zone3 Line Out (Variable, Fixed)

6GB

Setup System Setup Language (English, Español, Français)Auto Display (On, Off)Auto Standby (On, Off)Volume Display (Relative, Absolute)Dimmer (Bright, Dark, Off)Sleep (2:00:00, 1:30:00, 1:00:00, 0:30:00, Off)Software VersionNetwork UpdateUSB Update*3Tuner Setup*3 FM Mode

Name InputPreset Gain Level

Install Setup External Control (On, Off)Trigger 1*3Trigger 2*3Trigger 3*3 Test Picture for HDMI Out A

(4K/60Hz/4:4:4, 4K/24Hz/4:4:4, 1080p/60Hz, 480p/60Hz, Off)

Test Picture for HDMI Out B

(4K/60Hz/4:4:4*5, 4K/24Hz/4:4:4, 1080p/60Hz, 480p/60Hz, Off)

Save/Load*3Settings Lock*3 (On, Off)

Easy Setup Auto Calibration*3Internet Setup*3

*1 You can select the following inputs in the Input Setup screen. BD/DVD, SAT/CATV, GAME, STB, VIDEO, AUX, TV, SA-CD/CD

*2 You can set up each input using these menu items in [Input Setup].*3 Detailed information of these menu items is displayed after you select the settings.*4 The menu item can be adjusted against each speaker.*5 This parameter cannot be selected when [Zone2] is selected for [HDMI OUT B Mode].

7GB

Table of Contents

Map of GUI Menu System ................................................................................................ 2Using the home menu ...................................................................................... 2

PreparationsPreparing the receiver ......................................................................................................8

Outline dimensional drawing ...........................................................................8Attaching/removing the front cover ................................................................8

Mounting the receiver using the rack mount kit .............................................................9

ConnectionsConnecting a 4K TV that supports HDCP 2.2 and a 4K streaming box

using a 4K-compatible HDMI cable ........................................................................... 10

Connecting a device that supports high bandwidth video formats .............................. 11

Making a connection for PoE (Power over Ethernet) ..................................................... 11

Making a multi-zone connection ....................................................................................12

Speaker patterns and terminals to be connected ..........................................................13

SettingsSetting up the receiver ................................................................................................... 18

Activating the network standby mode .......................................................... 18Turning on the control mode to make an external controller connection .... 18Outputting a test tone from each speaker (Test Tone) .................................. 18Displaying a test screen (Test Picture) ........................................................... 18Adjusting the sound balance automatically (Auto Calibration) .................... 18List of messages after Auto Calibration measurements ............................... 19Saving/loading settings of the receiver ........................................................ 19Linking with a Hi-Fi music system ..................................................................20Mixing separate audio/video inputs (Last video mode) ...............................20Setting the in-ceiling speaker mode ..............................................................20Updating the software via the network ..........................................................21Updating the software with a USB flash drive ................................................21Setting up through a web browser .................................................................21Using the PING button ....................................................................................21When using a TV compatible with Dolby Digital Plus output ....................... 22Configuring the receiver to allow a Crestron Control System to control the

receiver .................................................................................................... 22

Using the hidden commandsPerforming commands using the receiver .................................................................... 23

Performing commands using the supplied remote control ......................................... 23Changing the remote control code ............................................................... 23Turning on transmitting mode of the discrete code for the main zone ........24Turning on transmitting mode of the discrete code for Zone 2/Zone 3 ...... 25

Useful informationZone distribution ............................................................................................................26

8GB

Preparations

Preparing the receiver

Outline dimensional drawing

Top

Front Side

174

mm

(6 7

/8 in

)

430 mm (17 in) 378 mm (15 in)

410 mm (16 1/4 in)

10 mm (13/32 in)

Attaching/removing the front coverThe front cover can be completely removed from the receiver.

Remove the front cover by inserting your fingers under the cover.

9GB

P

rep

aration

s

Mounting the receiver using the rack mount kitMake sure to use a “WS-RE1” dedicated rack mount kit for this receiver when mounting the receiver on a rack mount.

1 Check that all parts are included.Bracket × 2

Insulator

Blank panel × 1

Insulator

Screw +P U10-32×3/4 (inch)* × 6

Screw +T M5×18 (mm)*× 6

* Select the correct screws according to the type of rack.

Washer × 6

2 Remove screws from the right side of the receiver. Do not remove screws other than those specified.

3 Mount the bracket on the right side of the receiver in the order of the step numbers printed on the bracket using the screws removed in step 2.

4 Repeat steps 2 and 3 for the left side to mount the bracket.

5 Mount the receiver to the rack system. Make sure to perform this step with more than one person.

Rack mount

6 Mount the blank panel. (The blank panel hides the legs of the receiver to give it a cleaner look. Aligning the height of the receiver and blank panel lets it fit into a 4U size space.)

10GB

Connections

Connecting a 4K TV that supports HDCP 2.2 and a 4K streaming box using a 4K-compatible HDMI cableTo enjoy audio from 4K content such as 4K movies, connect the HDMI output/input jacks of each device that supports HDCP 2.2* using HDMI cables, as illustrated below.

* HDCP 2.2 (High‐bandwidth Digital Content Protection System Revision 2.2) is newly enhanced copyright protection technology that is used to protect content such as 4K movies from Studios.

4K media player 4K TV or 4K projector

Connect the receiver to a 4K media player using a High Speed HDMI cable (not supplied).

Connect the receiver to your 4K TV using a High Speed HDMI cable (not supplied).

If you are using an FMP‐X10/X5 Media Player:Connect the cable to the HDMI OUT 1 (for AUDIO VIDEO) jack of the player.Select [ (Settings)] ‐ [Sound] ‐ [Audio from HDMI OUT] ‐ [HDMI OUT 1] in the Home menu of the FMP-X10/X5 Media Player after Initial Setup is complete.

If you are using a different 4K media player:Connect the cable to one of the HDCP 2.2-compatible HDMI output jacks. For details, refer to the operating instructions supplied with your player.

If you are using a BRAVIA TV with the series name X950B, X900B or X850B: Connect the cable to the HDMI IN 1 jack of your TV.

If you are using a different 4K TV or 4K projector:Connect to one of the HDCP 2.2-compatible HDMI input jacks. If the jack is not compatible with the ARC (Audio Return Channel) function, also connect an optical digital cable. For details, refer to the operating instructions supplied with your 4K TV or 4K projector.

Note•Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony.

11GB

Co

nn

ectio

ns

Connecting a device that supports high bandwidth video formatsWhen you use high bandwidth video formats such as 4K/60p YCbCr 4:4:4/YCbCr 4:2:2/RGB 4:4:4 or 4K/60p YCbCr 4:2:0 Deep Color (Deep Colour) (10 bit or 12 bit), be sure to set [HDMI Signal Format].

1 Select [Setup] - [HDMI Setup] - [HDMI Signal Format] from the home menu.2 Select the HDMI input you want to apply the setting.3 Select [Enhanced format].Notes•For details on the high bandwidth video format, refer to the Help Guide.•When [Enhanced format] is selected, we recommend to use a Premium High Speed HDMI Cable with

Ethernet, which can support bandwidth up to 18 Gbps.•When [Enhanced format] is selected, some devices (cable box or satellite box, Blu-ray Disc player, and

DVD player) may not work. In this case, select [Standard format].•If your TV have similar menu for high bandwidth video format, check the setting on the TV menu when

you select [Enhanced format] on this receiver. For details on the TV menu setting, refer to the operating instructions of the TV.

Making a connection for PoE (Power over Ethernet)The following illustration is an example of configuration of a home network with the receiver and a computer.

LAN cable

Modem

Wireless access point, etc.

Network camera, etc.LAN cable

LAN cable

LAN cable

Computer Router

Internet

Notes•Connect a router to one of ports 1 to 8 on the receiver using a single LAN cable. Do not connect the

same router to the receiver using more than one LAN cable. Doing so may cause a malfunction.•Ports No. 1 and No. 2 support PoE (Power over Ethernet, Alternative A). If you connect a PoE-compatible

device to one of these ports, power will be supplied to the device from the receiver.•You can also connect a device that does not support PoE to the PoE port.•The PoE port lights in red while supplying power.•This receiver supports PoE Class 3.

12GB

Making a multi-zone connectionThis receiver allows various multi-zone connections.

Sample setup

Output jack Connected device Connection method

HDMI OUT A TV Connection: Connect to the TV using the HDMI OUT A jack.

Operation of the receiver: Press HDMI OUT to select HDMI A.

HDMI OUT B TV Connection: Connect to the TV using the HDMI OUT B jack.

Setup menu: Select [Setup] - [HDMI Setup] - [HDMI Out B Mode] - [Zone2] from the home menu. Select [Setup] - [HDMI Setup] - [Zone2 Audio Out] - [Zone2 TV + AMP] from the home menu.

SPEAKERS terminalsFRONT ACENTERSURROUND

5-channel speakers and 1 or 2 subwoofer(s)

Connection: Connect the speakers and subwoofer(s).

Setup menu: Perform Auto Calibration and set the following settings. Select [Setup] - [Speaker Setup] - [SB Speaker Assign] - [Zone2] from the home menu.

Tip•Select [Setup] - [Input Setup] - [In-Ceiling Speaker Mode] - [On] when you use

the in-ceiling speakers.

SPEAKERS terminalsSURROUND BACK (FRONT B/BI-AMP/ZONE 2) (when assigned to Zone 2)

2-channel speakers Connection: Connect Zone 2 L/R speakers.

Setup menu: Perform Auto Calibration and set the following settings. Select [Setup] - [Speaker Setup] - [SB Speaker Assign] - [Zone2] from the home menu.

13GB

Co

nn

ectio

ns

Speaker patterns and terminals to be connectedWhen you connect speakers to the receiver, refer to the following table.You can use the following table to confirm the speaker patterns supported by the receiver as well as the speaker terminals to which the speakers of each speaker pattern are to be connected.To set the speaker pattern, select [Setup] - [Speaker Setup] - [Speaker Pattern] from the home menu.

The abbreviations and symbol used in the list are as follows.

FH: Front high speakersTF: Top front speakersTM: Top middle speakersTR: Top rear speakersRH: Rear high speakers

FD: Front Dolby Atmos enabled speakersSRD: Surround Dolby Atmos enabled speakersSBD: Surround back Dolby Atmos enabled speakers: There are no speaker terminals that can be

assigned and output is enabled from the PRE OUT jacks only.

SB: SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals

H1: SPEAKERS HEIGHT 1 (ZONE 2) terminals

What the numbers in the speaker pattern indicate:

7 . 1 . 4Number of speakers located at listener’s level Number of

subwoofers

Number of height or overhead (top) speakers

Speaker pattern

SPEAKERS terminals / PRE OUT jacks

Zone 2 connection*1

Front B speaker

connection*1

Bi-amplifier connection*1FRONT A CENTER SURROUND

SURROUND BACK

(FRONT B/BI-AMP/ZONE 2) (single)

SURROUND BACK

(FRONT B/BI-AMP/ZONE 2)

(L/R)

HEIGHT 1 (ZONE 2) HEIGHT 2 SUBWOOFER

2.0 - - - - - - - SB or H1 SB SB2.0.2 (TM) - - - - (TM) - - SB SB SB2.0.2 (FD) - - - - (FD) - - SB SB SB2.1 - - - - - - SB or H1 SB SB2.1.2 (TM) - - - - (TM) - SB SB SB2.1.2 (FD) - - - - (FD) - SB SB SB3.0 - - - - - - SB or H1 SB SB3.0.2 (TM) - - - (TM) - - SB SB SB3.0.2 (FD) - - - (FD) - - SB SB SB3.1 - - - - - SB or H1 SB SB3.1.2 (TM) - - - (TM) - SB SB SB3.1.2 (FD) - - - (FD) - SB SB SB4.0 - - - - - - SB or H1 SB SB4.0.2 (FH) - - - (FH) - - SB SB SB4.0.2 (TM) - - - (TM) - - SB SB SB4.0.2 (FD) - - - (FD) - - SB SB SB4.0.2 (SRD) - - - (SRD) - - SB SB SB4.0.4 (FH+TM) - - - (FH) (TM)*2 - SB SB SB4.0.4 (FH+TR) - - - (FH) (TR)*2 - SB SB SB4.0.4 (FH+RH) - - - (FH) (RH)*2 - SB SB SB4.0.4 (TF+TM) - - - (TF) (TM)*2 - SB SB SB4.0.4 (TF+TR) - - - (TF) (TR)*2 - SB SB SB4.0.4 (TF+RH) - - - (TF) (RH)*2 - SB SB SB

14GB

Speaker pattern


Zone 2 connection*1

Front B speaker

connection*1


SURROUND BACK


SURROUND BACK


(L/R)


4.0.4 (TM+TR) - - - (TM) (TR)*2 - SB SB SB4.0.4 (TM+RH) - - - (TM) (RH)*2 - SB SB SB4.0.4 (FD+SRD) - - - (FD) (SRD)*2 - SB SB SB4.1 - - - - - SB or H1 SB SB4.1.2 (FH) - - - (FH) - SB SB SB4.1.2 (TM) - - - (TM) - SB SB SB4.1.2 (FD) - - - (FD) - SB SB SB4.1.2 (SRD) - - - (SRD) - SB SB SB4.1.4 (FH+TM) - - - (FH) (TM)*2 SB SB SB4.1.4 (FH+TR) - - - (FH) (TR)*2 SB SB SB4.1.4 (FH+RH) - - - (FH) (RH)*2 SB SB SB4.1.4 (TF+TM) - - - (TF) (TM)*2 SB SB SB4.1.4 (TF+TR) - - - (TF) (TR)*2 SB SB SB4.1.4 (TF+RH) - - - (TF) (RH)*2 SB SB SB4.1.4 (TM+TR) - - - (TM) (TR)*2 SB SB SB4.1.4 (TM+RH) - - - (TM) (RH)*2 SB SB SB4.1.4 (FD+SRD) - - - (FD) (SRD)*2 SB SB SB5.0 - - - - - SB or H1 SB SB5.0.2 (FH) - - (FH) - - SB SB SB5.0.2 (TM) - - (TM) - - SB SB SB5.0.2 (FD) - - (FD) - - SB SB SB5.0.2 (SRD) - - (SRD) - - SB SB SB5.0.4 (FH+TM) - - (FH) (TM)*2 - SB SB SB5.0.4 (FH+TR) - - (FH) (TR)*2 - SB SB SB5.0.4 (FH+RH) - - (FH) (RH)*2 - SB SB SB5.0.4 (TF+TM) - - (TF) (TM)*2 - SB SB SB5.0.4 (TF+TR) - - (TF) (TR)*2 - SB SB SB5.0.4 (TF+RH) - - (TF) (RH)*2 - SB SB SB5.0.4 (TM+TR) - - (TM) (TR)*2 - SB SB SB5.0.4 (TM+RH) - - (TM) (RH)*2 - SB SB SB5.0.4 (FD+SRD) - - (FD) (SRD)*2 - SB SB SB5.1 - - - - SB or H1 SB SB5.1.2 (FH) - - (FH) - SB SB SB5.1.2 (TM) - - (TM) - SB SB SB5.1.2 (FD) - - (FD) - SB SB SB5.1.2 (SRD) - - (SRD) - SB SB SB5.1.4 (FH+TM) - - (FH) (TM)*2 SB SB SB5.1.4 (FH+TR) - - (FH) (TR)*2 SB SB SB5.1.4 (FH+RH) - - (FH) (RH)*2 SB SB SB5.1.4 (TF+TM) - - (TF) (TM)*2 SB SB SB5.1.4 (TF+TR) - - (TF) (TR)*2 SB SB SB5.1.4 (TF+RH) - - (TF) (RH)*2 SB SB SB5.1.4 (TM+TR) - - (TM) (TR)*2 SB SB SB5.1.4 (TM+RH) - - (TM) (RH)*2 SB SB SB5.1.4 (FD+SRD) - - (FD) (SRD)*2 SB SB SB5.0 (SB) - - - - - H1 Not available Not available5.0.2 (SB+FH) - - (FH) - - Only PRE OUT Not available Not available5.0.2 (SB+TM) - - (TM) - - Only PRE OUT Not available Not available5.0.2 (SB+FD) - - (FD) - - Only PRE OUT Not available Not available5.0.2 (SB+SRD) - - (SRD) - - Only PRE OUT Not available Not available5.0.4 (SB+FH+TM) - - (FH) (TM) - Only PRE OUT Not available Not available5.0.4 (SB+FH+TR) - - (FH) (TR) - Only PRE OUT Not available Not available5.0.4 (SB+FH+RH) - - (FH) (RH) - Only PRE OUT Not available Not available

15GB

Co

nn

ectio

ns

Speaker pattern


Zone 2 connection*1

Front B speaker

connection*1


SURROUND BACK


SURROUND BACK


(L/R)


5.0.4 (SB+TF+TM) - - (TF) (TM) - Only PRE OUT Not available Not available5.0.4 (SB+TF+TR) - - (TF) (TR) - Only PRE OUT Not available Not available5.0.4 (SB+TF+RH) - - (TF) (RH) - Only PRE OUT Not available Not available5.0.4 (SB+TM+TR) - - (TM) (TR) - Only PRE OUT Not available Not available5.0.4 (SB+TM+RH) - - (TM) (RH) - Only PRE OUT Not available Not available5.0.4 (SB+FD+SRD) - - (FD) (SRD) - Only PRE OUT Not available Not available5.1 (SB) - - - - H1 Not available Not available5.1.2 (SB+FH) - - (FH) - Only PRE OUT Not available Not available5.1.2 (SB+TM) - - (TM) - Only PRE OUT Not available Not available5.1.2 (SB+FD) - - (FD) - Only PRE OUT Not available Not available5.1.2 (SB+SRD) - - (SRD) - Only PRE OUT Not available Not available5.1.4 (SB+FH+TM) - - (FH) (TM) Only PRE OUT Not available Not available5.1.4 (SB+FH+TR) - - (FH) (TR) Only PRE OUT Not available Not available5.1.4 (SB+FH+RH) - - (FH) (RH) Only PRE OUT Not available Not available5.1.4 (SB+TF+TM) - - (TF) (TM) Only PRE OUT Not available Not available5.1.4 (SB+TF+TR) - - (TF) (TR) Only PRE OUT Not available Not available5.1.4 (SB+TF+RH) - - (TF) (RH) Only PRE OUT Not available Not available5.1.4 (SB+TM+TR) - - (TM) (TR) Only PRE OUT Not available Not available5.1.4 (SB+TM+RH) - - (TM) (RH) Only PRE OUT Not available Not available5.1.4 (SB+FD+SRD) - - (FD) (SRD) Only PRE OUT Not available Not available6.0 (SB) - - - - H1 Not available Not available6.0.2 (SB+FH) - (FH) - - Only PRE OUT Not available Not available6.0.2 (SB+TM) - (TM) - - Only PRE OUT Not available Not available6.0.2 (SB+FD) - (FD) - - Only PRE OUT Not available Not available6.0.2 (SB+SRD) - (SRD) - - Only PRE OUT Not available Not available6.0.4 (SB+FH+TM) - (FH) (TM) - Only PRE OUT Not available Not available6.0.4 (SB+FH+TR) - (FH) (TR) - Only PRE OUT Not available Not available6.0.4 (SB+FH+RH) - (FH) (RH) - Only PRE OUT Not available Not available6.0.4 (SB+TF+TM) - (TF) (TM) - Only PRE OUT Not available Not available6.0.4 (SB+TF+TR) - (TF) (TR) - Only PRE OUT Not available Not available6.0.4 (SB+TF+RH) - (TF) (RH) - Only PRE OUT Not available Not available6.0.4 (SB+TM+TR) - (TM) (TR) - Only PRE OUT Not available Not available6.0.4 (SB+TM+RH) - (TM) (RH) - Only PRE OUT Not available Not available6.0.4 (SB+FD+SRD) - (FD) (SRD) - Only PRE OUT Not available Not available6.1 (SB) - - - H1 Not available Not available6.1.2 (SB+FH) - (FH) - Only PRE OUT Not available Not available6.1.2 (SB+TM) - (TM) - Only PRE OUT Not available Not available6.1.2 (SB+FD) - (FD) - Only PRE OUT Not available Not available6.1.2 (SB+SRD) - (SRD) - Only PRE OUT Not available Not available6.1.4 (SB+FH+TM) - (FH) (TM) Only PRE OUT Not available Not available6.1.4 (SB+FH+TR) - (FH) (TR) Only PRE OUT Not available Not available6.1.4 (SB+FH+RH) - (FH) (RH) Only PRE OUT Not available Not available6.1.4 (SB+TF+TM) - (TF) (TM) Only PRE OUT Not available Not available6.1.4 (SB+TF+TR) - (TF) (TR) Only PRE OUT Not available Not available6.1.4 (SB+TF+RH) - (TF) (RH) Only PRE OUT Not available Not available6.1.4 (SB+TM+TR) - (TM) (TR) Only PRE OUT Not available Not available6.1.4 (SB+TM+RH) - (TM) (RH) Only PRE OUT Not available Not available6.1.4 (SB+FD+SRD) - (FD) (SRD) Only PRE OUT Not available Not available6.0 - - - - - H1 Not available Not available6.0.2 (FH) - - (FH) - - Only PRE OUT Not available Not available6.0.2 (TM) - - (TM) - - Only PRE OUT Not available Not available6.0.2 (FD) - - (FD) - - Only PRE OUT Not available Not available6.0.2 (SRD) - - (SRD) - - Only PRE OUT Not available Not available

16GB

Speaker pattern


Zone 2 connection*1

Front B speaker

connection*1


SURROUND BACK


SURROUND BACK


(L/R)


6.0.2 (SBD) - - (SBD) - - Only PRE OUT Not available Not available6.0.4 (FH+TM) - - (FH) (TM) - Only PRE OUT Not available Not available6.0.4 (FH+TR) - - (FH) (TR) - Only PRE OUT Not available Not available6.0.4 (FH+RH) - - (FH) (RH) - Only PRE OUT Not available Not available6.0.4 (TF+TM) - - (TF) (TM) - Only PRE OUT Not available Not available6.0.4 (TF+TR) - - (TF) (TR) - Only PRE OUT Not available Not available6.0.4 (TF+RH) - - (TF) (RH) - Only PRE OUT Not available Not available6.0.4 (TM+TR) - - (TM) (TR) - Only PRE OUT Not available Not available6.0.4 (TM+RH) - - (TM) (RH) - Only PRE OUT Not available Not available6.0.4 (FD+SBD) - - (FD) (SBD) - Only PRE OUT Not available Not available6.1 - - - - H1 Not available Not available6.1.2 (FH) - - (FH) - Only PRE OUT Not available Not available6.1.2 (TM) - - (TM) - Only PRE OUT Not available Not available6.1.2 (FD) - - (FD) - Only PRE OUT Not available Not available6.1.2 (SRD) - - (SRD) - Only PRE OUT Not available Not available6.1.2 (SBD) - - (SBD) - Only PRE OUT Not available Not available6.1.4 (FH+TM) - - (FH) (TM) Only PRE OUT Not available Not available6.1.4 (FH+TR) - - (FH) (TR) Only PRE OUT Not available Not available6.1.4 (FH+RH) - - (FH) (RH) Only PRE OUT Not available Not available6.1.4 (TF+TM) - - (TF) (TM) Only PRE OUT Not available Not available6.1.4 (TF+TR) - - (TF) (TR) Only PRE OUT Not available Not available6.1.4 (TF+RH) - - (TF) (RH) Only PRE OUT Not available Not available6.1.4 (TM+TR) - - (TM) (TR) Only PRE OUT Not available Not available6.1.4 (TM+RH) - - (TM) (RH) Only PRE OUT Not available Not available6.1.4 (FD+SBD) - - (FD) (SBD) Only PRE OUT Not available Not available7.0 - - - - H1 Not available Not available7.0.2 (FH) - (FH) - - Only PRE OUT Not available Not available7.0.2 (TM) - (TM) - - Only PRE OUT Not available Not available7.0.2 (FD) - (FD) - - Only PRE OUT Not available Not available7.0.2 (SRD) - (SRD) - - Only PRE OUT Not available Not available7.0.2 (SBD) - (SBD) - - Only PRE OUT Not available Not available7.0.4 (FH+TM) - (FH) (TM) - Only PRE OUT Not available Not available7.0.4 (FH+TR) - (FH) (TR) - Only PRE OUT Not available Not available7.0.4 (FH+RH) - (FH) (RH) - Only PRE OUT Not available Not available7.0.4 (TF+TM) - (TF) (TM) - Only PRE OUT Not available Not available7.0.4 (TF+TR) - (TF) (TR) - Only PRE OUT Not available Not available7.0.4 (TF+RH) - (TF) (RH) - Only PRE OUT Not available Not available7.0.4 (TM+TR) - (TM) (TR) - Only PRE OUT Not available Not available7.0.4 (TM+RH) - (TM) (RH) - Only PRE OUT Not available Not available7.0.4 (FD+SBD) - (FD) (SBD) - Only PRE OUT Not available Not available7.1 - - - H1 Not available Not available7.1.2 (FH) - (FH) - Only PRE OUT Not available Not available7.1.2 (TM) - (TM) - Only PRE OUT Not available Not available7.1.2 (FD) - (FD) - Only PRE OUT Not available Not available7.1.2 (SRD) - (SRD) - Only PRE OUT Not available Not available7.1.2 (SBD) - (SBD) - Only PRE OUT Not available Not available7.1.4 (FH+TM) - (FH) (TM) Only PRE OUT Not available Not available7.1.4 (FH+TR) - (FH) (TR) Only PRE OUT Not available Not available7.1.4 (FH+RH) - (FH) (RH) Only PRE OUT Not available Not available7.1.4 (TF+TM) - (TF) (TM) Only PRE OUT Not available Not available7.1.4 (TF+TR) - (TF) (TR) Only PRE OUT Not available Not available7.1.4 (TF+RH) - (TF) (RH) Only PRE OUT Not available Not available7.1.4 (TM+TR) - (TM) (TR) Only PRE OUT Not available Not available

17GB

Co

nn

ectio

ns

Speaker pattern


Zone 2 connection*1

Front B speaker

connection*1


SURROUND BACK


SURROUND BACK


(L/R)


7.1.4 (TM+RH) - (TM) (RH) Only PRE OUT Not available Not available7.1.4 (FD+SBD) - (FD) (SBD) Only PRE OUT Not available Not available

*1 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals, select one of the following three connection methods: “Zone 2 connection,” “front B speaker connection,” or “bi-amplifier connection.”

*2 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals for Zone 2, front B speaker or bi-amplifier connection, the SPEAKERS HEIGHT 2 terminals cannot be used for height speakers. In this case, use the PRE OUT HEIGHT 2 jacks instead.

18GB

Settings

Setting up the receiver

Activating the network standby modeYou can keep the network function active even when the receiver is in standby mode.

1 Select [Setup] - [Network Setup] - [Network Standby] from the home menu.

2 Select [On].Note•When the receiver is in standby mode, the (power) indicator on

the front panel lights up in amber if [Network Standby] is set to [On].

Turning on the control mode to make an external controller connection

You can control the receiver from external devices.

1 Select [Setup] - [Install Setup] - [External Control] from the home menu.

2 Select [On].Note•Set [External Control] to [On] to activate the network connection or

to activate control from an external controller connected to the RS232C port.

Outputting a test tone from each speaker (Test Tone)

You can output a test tone from each speaker in sequence.

1 Select [Setup] - [Speaker Setup] - [Test Tone] from the home menu.

2 Select the setting you want.OffAuto: The test tone is output from each speaker in sequence.Front L, Center, Front R, Surround R, Sur Back R, Sur Back*, Sur Back L, Surround L, Height1 L, Height1 R, Height2 R, Height2 L, Subwoofer: You can select which speakers will output the test tone.

* [Sur Back] appears when only one surround back speaker is connected.

3 Adjust the speaker level.Tips•You can set a test tone by pressing the TEST TONE button on the

remote control. In this case, you can only use the display panel for the operation.

•To adjust the level of all speakers at the same time, press +/–. You can also use MASTER VOLUME on the receiver.

•The adjusted value is shown on the TV screen while adjusting.

Displaying a test screen (Test Picture)Display a test screen for HDMI OUT A and HDMI OUT B jacks.

1 Press TEST PICTURE on the remote control.Tips•A test picture is output in 480p from both the HDMI OUT A and

HDMI OUT B jack. If you want to output a test picture in another resolution, select [Setup] - [Install Setup] - [Test Picture for HDMI Out A] or [Test Picture for HDMI Out B] from the home menu, and then select the resolution setting you want.

•HDMI audio signals are not output while the test screen is displayed.

Adjusting the sound balance automatically (Auto Calibration)

This receiver is equipped with a D.C.A.C. (Digital Cinema Auto Calibration) function, which allows you to perform automatic calibration.Auto Calibration allows you to perform automatic calibration as follows.

– Check the connection between each speaker and the receiver.

– Adjust the speaker level. – Measure the distance of each speaker from your seating position.*1

– Measure the speaker size.*1 – Measure the frequency characteristics (EQ).*1 – Measure the frequency characteristics (Phase).*1 *2

*1 The measurement result is not utilized when [Direct] is selected.*2 The measurement result may be not utilized, depending on the

audio formats.

Note•The D.C.A.C. is designed to achieve proper sound balance for your

room. However, you can adjust the speaker levels manually according to your preference using Test Tone.

1 Set up each speaker correctly, and then connect the optimizer microphone.

2 Select [Setup] - [Speaker Setup] - [Auto Calibration] from the home menu.

3 Follow the instructions on the TV screen, then press to select [Start].The measurement starts in 5 seconds.The measurement process will take approximately 30 seconds with a test tone.When the measurement ends, a beep sounds and the screen switches.

4 Select the item you want.Save: Saves the measurement results and exits the setting process.Retry: Performs the Auto Calibration again.Discard: Exits the setting process without saving the measurement results.

5 Save the measurement results.Select [Save] in step 4.

19GB

Settin

gs

Calibration MatchingWhen Auto Calibration is executed, this function works automatically to match the distance and level of the right and left speakers. You can set this function only after the D.C.A.C. measurement process has been completed and the results of D.C.A.C. measurement are saved. The setting is valid until you change it.

Note•If an error code or warning message appears on the screen in

step 3, see “List of messages after Auto Calibration measurements” (page 19).

Tips•You can also perform automatic calibration by pressing the AUTO

CAL button on the remote control. If you use the AUTO CAL button, the following restrictions apply to the operation: – Prior settings relating to the Auto Calibration will be skipped. – You can only use the display panel for the operation.

•The Auto Calibration function will be canceled if you perform the following during the measurement process: – Turn the receiver on or off. – Press the input buttons on the remote control or on the receiver. – Press . – Press SPEAKERS on the receiver. – Press HDMI OUTPUT. – Press AMP MENU. – Press HOME. – Press AUTO CAL. – Change the volume level.

List of messages after Auto Calibration measurements•Code 31:

Front speakers are not selected properly. Select the front speakers using SPEAKERS, and then perform Auto Calibration again.

•Code 32, Code 33: – Speakers were not detected or not connected properly. – None of the front speakers are connected or only one front speaker is connected.

– Either the surround left or surround right speaker is not connected.

– A surround back speaker is connected only to the SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) R terminal. If connecting only one surround back speaker, connect it to the SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) L terminal.

– Either the Height1 left or Height1 right speaker is not connected.

– Either the Height2 left or Height2 right speaker is not connected.

– The optimizer microphone is not connected. Make sure that the optimizer microphone is connected properly, and then perform Auto Calibration again. If the optimizer microphone is connected properly but the error code still appears, the optimizer microphone cable may be damaged.

•Code 34:Speakers are not placed in the proper position. Speakers or an optimizer microphone on the right or left may be placed wrongly. See the supplied Startup Guide and check the speaker position.

•Code 35:The measurement result is not match to the speaker pattern you set. See the Help Guide and change the setting to fit the actual speaker pattern.

•Warning 40:The measurement process has been completed and a high noise level has been detected. You may be able to achieve better results if you try the process again in a quiet environment.

•Warning 41, Warning 42: – The input from the optimizer microphone is too large. – The distance between the speaker and the microphone may be too small. Set them further apart and perform the measurement again.

•Warning 43:The distance and position of a subwoofer cannot be detected. This may be caused by noise. Try performing the measurement in a quiet environment.

•Warning 44:Measurement has been completed. However the speakers are not placed in the proper position with respect to each other. See the supplied Startup Guide and check the relative positions of the speakers.

•NO WARNING:There is no warning information.

Saving/loading settings of the receiver You can save the settings to a USB flash drive and restore the saved settings to the receiver or to another receiver of the same model.

Saving Loading

To save the settingsInsert a USB flash drive to the USB port on the front panel of the receiver. Select [Setup] - [Install Setup] - [Save/Load] - [Save] from the home menu.

To load the settingsInsert to the USB port on the front panel of the receiver a USB flash drive on which the settings are saved.Select [Setup] - [Install Setup] - [Save/Load] - [Load] from the home menu.

20GB

Linking with a Hi-Fi music systemThis receiver can switch its power and input automatically by linking with playback operation of the Hi-Fi music system.Configure settings to enable the receiver to operate linked with a Hi-Fi System device.

1 Select [Setup] - [Network Setup] - [Music Connect] from the home.

2 Select the setting you want.Each of the following settings can be selected on both Device 1 and Device 2.Connected Device: Select the connected device to enable the function. Input for Music Connect1 or 2: Select the input to link with.Preset Volume: Preset the volume level.Output Zone: Select the zone to which you want to output sound.

3 Start playback on the player device.The receiver will be turned on and the input will be switched automatically.

To disable Music ConnectSelect [Setup] - [Network Setup] - [Music Connect] - [Connected Device] - [Remove Connected Device] from the home menu.

Notes•The Music Connect feature can be linked only with the power

source and input of the main zone or Zone 2. This feature does not link with Zone 3.

•The link feature of Music Connect may not work correctly depending on factors such as the specifications of the connected device.

•We recommend that you set [Network Standby] to [On] to activate the feature for linking with Music Connect even if the receiver is in standby mode.

Mixing separate audio/video inputs (Last video mode)

The receiver can continuously output the input video image used most recently when an audio-only input source is selected.

1 Connect the desired background music source to an input by analog, optical, or coaxial cable. Or use the built-in tuner.

2 Set the input to the following in the Input Setup menu.HDMI: [None]Component: [None]Composite: [---]Audio: The input connected to the source.When using the built-in tuner, set the screen mode to [Simple] using the options menu in [FM/AM Display].

ExamplePress SAT/CATV followed by TUNER to listen to sound from the built-in tuner while watching a video source connected to SAT/CATV.The audio output changes to that of the tuner source while SAT/CATV video output is retained.

Setting the in-ceiling speaker modeSony has developed a new special sound mode for CI installation. This feature will virtually relocate the front and center in-ceiling speakers down to around the screen. That way, the customer will hear the actors’ voices coming from the screen instead of the ceiling. This mode also makes music sound more natural in a room with in-ceiling speakers.

1 Perform Auto Calibration.2 Select [Setup] - [Audio Setup] - [In-Ceiling

Speaker Mode] - [Front & Center] or [Front] from the home menu.

Notes•This mode is not available when [Pure Direct] is set to [On].•This mode will be disabled in a speaker pattern with Dolby

Enabled speakers.

Tips•You can select on/off for each input in Input Setup menu.•You can also select [In-Ceiling Speaker Mode] in [Sound Effects]

from the home menu.•You can also switch the function on/off by pressing IN-CEILING SP

on the remote control or the receiver.•To obtain optimal effects in the listening environment, configure

the [Ceiling Height] setting and perform Auto Calibration.

21GB

Settin

gs

Updating the software via the networkYou can update the receiver software via the network.Connect the receiver to the Internet beforehand, and then make sure [Internet Connection] is displayed as [OK] in the [Network Information] menu.

1 Select [Setup] - [System Setup] from the home menu.

2 Select [Network Update].3 Follow the instructions on the TV screen

[UPDATING…XXX%] will be displayed on the frontdisplay. The receiver will automatically reboot after theupdate completes.

Updating the software with a USB flash driveMake sure to perform the following steps when a software update is delivered.You can download the update software from the following website.https://www.sony.com/am/support

Saving

New software

Updating

1 Copy the file for updating to the top level directory (just under the root directory) of the USB flash drive (FAT16 or FAT32 with more than 100 MB of free space).

2 Turn the receiver on.3 Insert the USB flash drive into the USB port on

the front panel of the receiver.

4 Select [Setup] - [System Setup] - [USB Update] from the home menu.[UPDATING…XXX%] will be displayed on the front display. The receiver will automatically reboot after the update completes.

Note•It takes up to 100 minutes for the update to complete.

Setting up through a web browserThe receiver provides a web browser interface for configuring settings.The PING feature is useful for checking your IP address quickly.

Open a web browser on your computer or mobile device on the same network with the receiver, and then access http://[receiver’s ip-address]/

Using the PING button The receiver provides the following functions simply by pressing the PING button on the front panel of the receiver.

The receiver sends specific UDP multicast or broadcast packets to establish a network connection.

Protocol Protocol owner

SDDP Control4

The receiver displays its IP information on the front display as follows.

Information

1 IP address

2 MAC address

22GB

When using a TV compatible with Dolby Digital Plus output

The receiver can receive Dolby Atmos signals sent from a TV or other connected devices. Since Dolby Atmos signals from the TV are sent in Dolby Digital Plus format, ARC (Audio Return Channel)-compatible HDMI jacks must be connected using an HDMI cable instead of an optical digital cable.Normally, it would be necessary to turn on the Control for HDMI function for both receiver and TV in order to use the Audio Return Channel (ARC). In this case, however, the link function between the receiver, TV and other devices is also activated. Therefore, in order to facilitate the operation of the controller in a custom installation (where the entire system is controlled via the controller), this receiver is designed to activate the ARC function separately, even if the Control for HDMI function is turned off.As a result, Dolby Atmos-compatible content sent from the TV can be played back through an ARC-compatible HDMI jack, without the need to activate the link function using the Control for HDMI function.Since the ARC function can still be used as before, Dolby Atmos-compatible content can be played back in high quality, even if the Control for HDMI function for the TV or connected devices is turned on.If you use a TV compatible with Dolby Digital Plus output, perform the following settings on the receiver in order to play back Dolby Atmos-compatible content sent from the TV.

1 Turn on the Control for HDMI function on the TV.The ARC output from the TV will be enabled.

2 Set the Dolby Digital Plus output of the TV to enable it.Dolby Atmos output from the TV will be enabled.

3 Select [Setup] – [HDMI Setup] – [Audio Return Channel] – [On] on the receiver.ARC signals from the TV can now be received.

4 Select [Setup] – [Input Setup] – [Input Mode] – [Auto] on the receiver.

5 Press HDMI OUT to select [HDMI OUT A].6 Turn off the Control for HDMI function for all

devices connected to the receiver except the TV.

7 Turn off any settings for the operation of other devices on the TV’s remote control.

8 Switch the input of the receiver to [TV].

Configuring the receiver to allow a Crestron Control System to control the receiver

This receiver is certified as Crestron Connected. You can therefore allow a Crestron Control System to control the receiver collectively as part of a home automation system by configuring the receiver as follows.This operation can only be performed using the buttons and display panel on the front of the receiver. You will also need to connect the receiver to a network.

1 Turn on the receiver.2 Press AMP MENU.3 Press / repeatedly to select [3. NETWORK

SETUP], and then press ENTER.

4 Press / repeatedly to select [3.5. CRESTRONCONNECTED SETUP], and then press ENTER.

5 Input the following items. –3.5.2. IP ADDRESS (the controller’s IP address) –3.5.3. PORT (“41794” is set as the default.) –3.5.4. IPID* (the controller’s IPID)

* Input the values as hexadecimal numbers. Press / repeatedly to select each item, and then

press ENTER. Press / repeatedly to select a digit and press

/ repeatedly to change the digit. Press ENTER to confirm the value.

If you want to re-input the values, press RETURN and then repeat the steps starting from .

6 Press / repeatedly to select [3.5.1. CRESTRON CONNECTED], and then press ENTER.

7 Press / repeatedly to select [ON], and then press ENTER.

If you have already configured the receiver’s network settings, you can also configure the above settings from a web browser.Open a web browser on a computer or mobile device connected to the same network as the receiver, and then access the following URL.http://[receiver’s IP address]/

23GB

Usin

g th

e h

idd

en

com

man

ds

Using the hidden commands

Performing commands using the receiverThis receiver allows you to perform various commands using buttons on the front panel.

PING ENTERAMP

MENU 2CH/DIRECT MULTI ST.

Function Operation

User initialize (Memory Clear) Hold for 5 seconds in standby mode.

Sound Field Clear Hold down MULTI.ST. and press in standby mode.

Settings Lock Hold down PING and AMP MENU and press ENTER while the receiver is turned on.

Command mode(Remote Controller)

Hold down 2CH/DIRECT and press in standby mode.

Performing commands using the supplied remote controlThis receiver allows you to perform various commands using the supplied remote control.

Changing the remote control code

1 While holding down MAIN, press MAIN . MAIN will start flashing.

2 Press CUSTOM PRESET 1 or 2 to select AV1 or AV2 as needed.MAIN will stop flashing and light up in red.

3 Press .MAIN will start flashing again.

4 Press again to set the command mode.

24GB

Turning on transmitting mode of the discrete code for the main zone

While holding down MAIN, press INPUT MODE on the remote control for 5 seconds.Transmitting mode of the discrete code for the main zone is activated when MAIN starts flashing.

Command list in transmitting mode of the discrete code for the main zone

Key name Transmitting mode of the discrete code (main)

Code name

HDMI OUTPUT HDMI OUTPUT

ZONE2 POWER ON (ZONE2)

ZONE3 POWER ON (ZONE3)

MAIN POWER ON

ZONE 2 (illuminated in red)

ZONE 2


ZONE 3

MAIN (illuminated in red)

MAIN

BD/DVD 1

SAT/CATV 2

GAME 3

STB 4

VIDEO 5

AUX 6

TV 7

SA-CD/CD 8

TUNER 9

SOUND OPTIMIZER 10/0

PURE DIRECT 11/*

IN-CEILING SP MODE 12/#

CUSTOM PRESET 1 PARTY MODE ON/OFF

CUSTOM PRESET 2 ZONE 2 PARTY MODE

CUSTOM PRESET 3 ZONE 3 PARTY MODE

CUSTOM PRESET 4 ZONE 2+3 PARTY MODE

DISPLAY HDMI OUTPUT A

Key name Transmitting mode of the discrete code (main)

Code name

AMP MENU HDMI OUTPUT B

RETURN HDMI OUTPUT A+B

OPTIONS HDMI OUTPUT OFF

–

HOME SYSTEM POWER OFF

INPUT SETUP SF 2CH STEREO

TEST PICTURE POWER OFF (ZONE2)

TEST TONE POWER OFF (ZONE3)

AUTO CAL POWER OFF

2CH/DIRECT FRONT SPEAKER OFF

A.F.D. FRONT SPEAKER A

MOVIE FRONT SPEAKER B

MULTI ST. FRONT SPEAKER A+B

TUNING + –

MEMORY –

PRESET + –

TUNING – TV HDMI1

FM TV HDMI2

AM TV HDMI3

PRESET – TV HDMI4

TV OFF

+ MUTING OFF

– MUTING ON

INPUT + FUNCTION +

INPUT – FUNCTION –

INPUT MODE TV ON

To deactivate transmitting mode of the discrete code for the main zoneWhile holding down MAIN, press INPUT MODE on the remote control for 5 seconds.Transmitting mode of the discrete code for the main zone is deactivated when MAIN stops flashing.

Note•Transmitting mode of the discrete code for the main zone is cancelled automatically when you do not

press any key more than 10 minutes.

25GB

Usin

g th

e h

idd

en

com

man

ds

Turning on transmitting mode of the discrete code for Zone 2/Zone 3

Press ZONE2 or ZONE3 on the remote control when transmitting mode of the discrete code for the main zone is active.Transmitting mode of the discrete code for Zone 2/Zone 3 is activated when the selected zone button start flashing.

Command list in transmitting mode of the discrete code for Zone 2/Zone 3

Key name Transmitting mode of the discrete code (Zone 2)

Transmitting mode of the discrete code (Zone 3)

Code name Code name

HDMI OUTPUT POWER OFF POWER OFF

ZONE2 — —

ZONE3 — —

MAIN POWER ON POWER ON


ZONE 2 ZONE 2


ZONE 3 ZONE 3

MAIN (illuminated in red)

MAIN MAIN

BD/DVD 1 1

SAT/CATV 2 2

GAME 3 3

STB 4 4

VIDEO 5 5

AUX 6 6

TV 7 7

SA-CD/CD 8 8

TUNER 9 9

SOUND OPTIMIZER 10/0 10/0

PURE DIRECT 11/* 11/*

IN-CEILING SP MODE 12/# 12/#

CUSTOM PRESET 1 — —




DISPLAY — —

AMP MENU — —

RETURN — —

OPTIONS — —

— —

— —

— —

— —

— —

SP SETUP — —

HOME — —

INPUT SETUP — —

TEST PICTURE — —

Key name Transmitting mode of the discrete code (Zone 2)

Transmitting mode of the discrete code (Zone 3)

Code name Code name

TEST TONE — —

AUTO CAL — —

2CH/DIRECT — —

A.F.D. — —

MOVIE — —

MULTI ST. — —

TUNING + — —

MEMORY — —

PRESET + — —

TUNING – — —

FM — —

AM — —

PRESET – — —

MUTING MUTING

+ MUTING OFF MUTING OFF

– MUTING ON MUTING ON

INPUT + FUNCTION + FUNCTION +

INPUT – FUNCTION – FUNCTION –

INPUT MODE — —

26GB

Useful information

Zone distributionThe receiver can deliver input signals for each video or audio input to another zone in combinations such as the following.

Zone distribution capability (video)

Video input Main zoneHDMI OUT A

Main zoneHDMI OUT B*1

Zone 2HDMI OUT B*2

Main zoneVIDEO OUT MONITOR (Composite)

Zone 2 VIDEO OUT ZONE 2 (Composite)

VIDEO IN jacks (composite) *3

COMPONENT VIDEO IN jacks (component)

*3 – –

HDMI IN jacks*5 *6 –*4 –*4

*1 When [HDMI Out B Mode] in the [HDMI Setup] menu is set to [Main].*2 When [HDMI Out B Mode] in the [HDMI Setup] menu is set to [Zone2].*3 The receiver cannot output a different analog signal to the Zone 2 HDMI OUT jack while an analog

signal of the main zone is being output from the HDMI OUT A jack.*4 HDMI down converting is prohibited by HDMI guidelines.*5 HDMI IN 1, 2, 3, 4, and 5 jacks support bandwidths of up to 18 Gbps, and HDMI IN 6 (GAME) jack

supports bandwidths of up to 9 Gbps.*6 Zone 2 HDMI OUT jack supports bandwidths of up to 9 Gbps.

Zone distribution capability (audio)

Input source / Output

Main zone HDMI OUT A

Main zoneHDMI OUT B

Zone 2HDMI OUT B

Main zone SPEAKERS terminals

Zone 2 SPEAKERS terminals

Zone 2 AUDIO OUT (Fixed/Variable)

Zone 3 AUDIO OUT (Fixed/Variable)

Multi Ch PRE OUT

AUDIO IN jacks (RCA)

– –

Built-in Tuner*1 – –

DIGITAL OPTICAL IN jacks

– – *2 *2 *2 –

DIGITAL COAXIAL IN jack

– – *2 *2 *2 –

HDMI IN jacks *3 *3 –

*1 When [FM TUNER] or [AM TUNER] is selected at the same time in the main zone and Zone 2 or Zone 3, the item most recently selected will be set.

*2 Digital audio stream is not supported for distributing signals such as Dolby Digital and DTS. The Digital Audio output setting should be “2ch PCM” on the player device.

*3 Zone 2 speaker out and Zone 2 audio out only support 2-channel audio output. Multi-channel stream signals are automatically converted to 2 channels signals, and then output to Zone 2 if the same source signals as the main zone are selected in Zone 2.

27GB

U

sefu

l info

rmatio

n

2FR

Carte du système de l’IGU

Utilisation du menu d’accueil

Les options de menu soulignées correspondent aux paramètres par défaut.

HomeWatch BD/DVD

SAT/CATVGAMESTBVIDEOTV

Listen AUXSA‐CD/CDFM TUNERAM TUNER

Custom Preset MovieMusicPartyNight

Sound Effects Sound Field 2ch StereoDirectAuto Format DecodingDolby SurroundNeural:XMulti Stereo

EqualizerSound Optimizer Normal

LowOff

In‐Ceiling Speaker Mode Front & CenterFrontOff

Pure Direct OnOff

3FR

Zone Controls Zone2 Power OnOff

Zone2 Input SOURCEBD/DVDSAT/CATVGAMESTBVIDEOAUXTVSA-CD/CDFM TUNERAM TUNER


Zone3 Power OnOff

Zone3 Input SOURCEVIDEOAUXTVSA-CD/CDFM TUNERAM TUNER


4FR

Setup Input Setup*1 *2 IconNameWatch/ListenShow/HideHDMIOPTICAL/COAXIALCOMPONENTVIDEO INAUDIO INInput ModePreset Sound FieldIn-Ceiling Speaker ModeA/V SyncSubwoofer Low Pass FilterSubwoofer LevelPreset Gain LevelTrigger 1Trigger 2Trigger 3

Speaker Setup Auto Calibration*3Automatic Phase Matching (Auto, Off)Calibration Type (Full Flat, Engineer, Front Reference, Off)Speaker PatternSpeaker ConnectionsSB Speaker Assign (Zone2, Bi-Amp, Front B, Off)Height1 SP Assign (Zone2, Off)Size*4 (Large, Small)Distance*4 (32 ft 9 in, 32 ft 8 in, …, 9 ft 10 in, …,

6 ft 7 in, 6 ft 6 in)Level*4 (+10.0dB, +9.5dB, …, 0.0dB, …, –9.5dB,

–10.0dB)Test Tone*3Crossover Frequency*4 (40Hz, 50Hz, …, 120Hz, …, 190Hz, 200Hz)Equalizer*4 (+10.0dB, +9.0dB, …, 0.0dB, …, –9.0dB,

–10.0dB)Center Speaker Lift Up (10, 9, 8, …, 2, 1, Off)Surround Speaker Position (Front, Back)Speaker Relocation (Type A, Type B, Off)Ceiling Height (32 ft 9 in, 32 ft 8 in, …, 9 ft 0 in, …,

6 ft 7 in, 6 ft 6 in)Speaker Impedance (8Ω, 4Ω)Distance Unit (feet, meter)

Network Setup Internet Setup*3Information*3Network Standby (On, Off)Music Connect Device1 Connected Device

Input for Music Connect1

Preset VolumeOutput Zone

Device2 Connected DeviceInput for Music Connect2Preset VolumeOutput Zone

5FR

Setup Audio Setup Digital Legato Linear (Auto 1, Auto 2, Off)Sound Optimizer (Normal, Low, Off)Sound Field*3In-Ceiling Speaker Mode (Front & Center, Front, Off)Pure Direct (On, Off)Subwoofer Low Pass Filter (On, Off)A/V Sync (300 ms, 290 ms, …, 10 ms, 0 ms,

HDMI Auto)Dual Mono (Main, Sub, Main/Sub)Dynamic Range Compressor

(Auto, On, Off)

Neural:X (On, Off)

HDMI Setup 4K Scaling (Auto, Off)Control for HDMI (On, Off)Standby Linked to TV (Auto, On, Off)Audio Return Channel (On, Off)Pass Through (Auto, On, Off)Audio Out (AMP, TV+AMP)Zone2 Audio Out (AMP, Zone2 TV+AMP, Zone2 AMP)Subwoofer Level (Auto, +10dB, 0dB)HDMI Out B Mode (Main, Zone2)Priority (Main&Zone2, Main Only)Fast View (Auto, Off)HDMI Signal Format HDMI IN 1 (Standard format,





Enhanced format)

Zone Setup Zone Controls Zone2 Power (On, Off)Zone2 Input (SOURCE, BD/DVD, …,

FM TUNER, AM TUNER)


Zone3 Power (On, Off)Zone3 Input (SOURCE, VIDEO, …,

FM TUNER, AM TUNER)Zone3 Volume (+23.0dB, +22.5dB, …,

–40.0dB, …, –92.0dB, –∞dB)

Main Preset Volume (+23.0dB, +22.5dB, …, –92.0dB, –∞dB, Off)Main Max Volume (+23.0dB, +22.5dB, ..., –40.0dB)Zone2 Preset Volume (+23.0dB, +22.5dB, …, –92.0dB, –∞dB, Off)Zone2 Max Volume (+23.0dB, +22.5dB, ..., –40.0dB)Zone2 Line Out (Variable, Fixed)Zone3 Preset Volume (+23.0dB, +22.5dB, …, –92.0dB, –∞dB, Off)Zone3 Max Volume (+23.0dB, +22.5dB, ..., –40.0dB)Zone3 Line Out (Variable, Fixed)

6FR

Setup System Setup Language (English, Español, Français)Auto Display (On, Off)Auto Standby (On, Off)Volume Display (Relative, Absolute)Dimmer (Bright, Dark, Off)Sleep (2:00:00, 1:30:00, 1:00:00, 0:30:00, Off)Software VersionNetwork UpdateUSB Update*3Tuner Setup*3 FM Mode

Name InputPreset Gain Level

Install Setup External Control (On, Off)Trigger 1*3Trigger 2*3Trigger 3*3 Test Picture for HDMI Out A

(4K/60Hz/4:4:4, 4K/24Hz/4:4:4, 1080p/60Hz, 480p/60Hz, Off)

Test Picture for HDMI Out B

(4K/60Hz/4:4:4*5, 4K/24Hz/4:4:4, 1080p/60Hz, 480p/60Hz, Off)

Save/Load*3Settings Lock*3 (On, Off)

Easy Setup Auto Calibration*3Internet Setup*3

*1 Vous pouvez sélectionner les entrées suivantes sur l’écran Input Setup. BD/DVD, SAT/CATV, GAME, STB, VIDEO, AUX, TV, SA-CD/CD

*2 Vous pouvez sélectionner chaque entrée à l’aide de ces options de menu dans [Input Setup].*3 Les informations détaillées de ces options de menu s’affichent après que vous avez sélectionné les réglages.*4 Il est possible de régler l’option de menu pour chaque enceinte.*5 Il est impossible de sélectionner ce paramètre lorsque [HDMI OUT B Mode] est réglé sur [Zone2].

7FR

Table des matièresCarte du système de l’IGU ............................................................................................... 2

Utilisation du menu d’accueil ........................................................................... 2

PréparationsPréparation de l’ampli-tuner............................................................................................8

Plan d’encombrement ......................................................................................8Fixation/retrait du capot avant .........................................................................8

Montage de l’ampli-tuner à l’aide du kit de montage sur bâti ......................................9

RaccordementsRaccordement d’un téléviseur 4K prenant en charge HDCP 2.2 et d’un décodeur de

flux 4K à l’aide d’un câble HDMI compatible 4K ....................................................... 10

Raccordement d’un appareil prenant en charge des formats vidéo à haute bande passante ...................................................................................................................... 11

Établissement d’une connexion pour PoE (Power over Ethernet) ................................. 11

Établissement d’une connexion sur plusieurs zones .....................................................12

Modèles d’enceintes et bornes à raccorder ...................................................................13

RéglagesRéglage de l’ampli-tuner ............................................................................................... 19

Activation du mode veille du réseau.............................................................. 19Activation du mode de commande pour établir une connexion de

commande externe ................................................................................. 19Reproduction d’une tonalité de test depuis chacune des enceintes

(Test Tone) ............................................................................................... 19Affichage d’une mire (Test Picture) ................................................................ 19Réglage automatique de la balance du son (Auto Calibration) .................... 19Liste des messages qui s’affichent après les mesures de calibrage

automatique ............................................................................................20Enregistrement/chargement des réglages sur l’ampli-tuner .......................20Raccordement sur une chaîne Hi-Fi ................................................................21Mixage d’entrées audio/vidéo distinctes (dernier mode vidéo) ....................21Réglage du mode d’enceintes au plafond ......................................................21Mise à jour du logiciel via le réseau ............................................................... 22Mise à jour du logiciel à l’aide d’une clé USB ................................................ 22Configuration via un navigateur Web ............................................................ 22Utilisation de la touche PING ......................................................................... 22Utilisation d’un téléviseur compatible avec une sortie Dolby Digital Plus ... 23Configuration de l’ampli-tuner pour permettre à un système de contrôle

Crestron de contrôler l’ampli-tuner ........................................................ 23

Utilisation des commandes cachéesExécution de commandes à l’aide de l’ampli-tuner .....................................................24

Exécution de commandes à l’aide de la télécommande fournie .................................24Changement du code de la télécommande .................................................24Activation du mode de transmission du code discret pour la zone principale ... 25Activation du mode de transmission du code discret pour la Zone 2/Zone 3 ...26

Informations utilesDistribution des zones ................................................................................................... 27

8FR

Préparations

Préparation de l’ampli-tuner

Plan d’encombrement

Haut

Avant Côté

174

mm

(6 7

/8 p

o)

430 mm (17 po) 378 mm (15 po)

410 mm (16 1/4 po)

10 mm (13/32 po)

Fixation/retrait du capot avantVous pouvez retirer complètement le capot avant de l’ampli-tuner.

Retirez le capot avant en insérant les doigts sous le capot.

9FR

P

rép

aration

s

Montage de l’ampli-tuner à l’aide du kit de montage sur bâtiAssurez-vous d’utiliser un kit de montage sur bâti « WS-RE1 » dédié à cet ampli-tuner lorsque vous le montez sur un bâti.

1 Vérifiez que toutes les pièces sont fournies.Support × 2

Isolateur

Panneau blanc × 1

Isolateur

Vis +P U10-32×3/4 (pouce)* × 6

Vis +T M5×18 (mm)*× 6

* Sélectionnez les vis adaptées au type de bâti.

Rondelle × 6

2 Ôtez les vis du côté droit de l’ampli-tuner. N’ôtez pas d’autres vis que celles indiquées.

3 Montez le support du côté droit de l’ampli-tuner dans l’ordre des numéros d’étape imprimés sur celui-ci à l’aide des vis retirées à l’étape 2.

4 Répétez les étapes 2 et 3 sur le côté gauche pour monter le support.

5 Montez l’ampli-tuner sur le système de bâti. Veillez à effectuer cette étape avec plus d’une personne.

Montage sur bâti

6 Montez le panneau blanc. (Le panneau blanc cache les pieds de l’ampli-tuner pour des raisons esthétiques. L’alignement de la hauteur de l’ampli-tuner et du panneau blanc permet de le loger dans un espace d’une taille 4U.)

10FR

Raccordements

Raccordement d’un téléviseur 4K prenant en charge HDCP 2.2 et d’un décodeur de flux 4K à l’aide d’un câble HDMI compatible 4KPour profiter de contenus audio 4K, tels que des films 4K, raccordez les prises de sortie/entrée HDMI de chaque appareil prenant en charge HDCP 2.2* à l’aide de câbles HDMI, comme illustré ci-dessous.

* HDCP 2.2 (High‐bandwidth Digital Content Protection System Revision 2.2) est une nouvelle technologie améliorée de protection des droits d’auteur utilisée pour protéger du contenu tel que des films 4K de studios.

Lecteur multimédia 4K Téléviseur 4K ou projecteur 4K

Raccordez l’ampli-tuner sur un lecteur multimédia 4K à l’aide d’un câble High Speed HDMI (non fourni).

Raccordez l’ampli-tuner sur votre téléviseur 4K à l’aide d’un câble High Speed HDMI (non fourni).

Si vous utilisez un lecteur multimédia FMP‐X10/X5 :Raccordez le câble à la prise HDMI OUT 1 (for AUDIO VIDEO) du lecteur.Sélectionnez [ (Réglages)] ‐ [Son] ‐ [Sortie audio HDMI OUT] ‐ [HDMI OUT 1] dans le menu d’accueil du lecteur multimédia FMP-X10/X5 une fois la configuration initiale terminée.

Si vous utilisez un lecteur multimédia 4K différent :Raccordez le câble sur l’une des prises de sortie HDMI compatibles HDCP 2.2. Pour des informations détaillées, reportez-vous au mode d’emploi du lecteur.

Si vous utilisez un téléviseur BRAVIA dont le nom de série est X950B, X900B ou X850B : Raccordez le câble sur la prise HDMI IN 1 du téléviseur.

Si vous utilisez un téléviseur 4K différent ou un projecteur 4K :Raccordez l’une des prises d’entrée HDMI compatibles HDCP 2.2. Si la prise n’est pas compatible avec la fonction ARC (Audio Return Channel), raccordez également un câble optique numérique. Pour en savoir plus, reportez-vous au mode d’emploi fourni avec votre téléviseur 4K ou projecteur 4K.

Remarque•Sony vous recommande d’utiliser un câble agréé HDMI ou un câble HDMI fabriqué par Sony.

11FR

Racco

rde

me

nts

Raccordement d’un appareil prenant en charge des formats vidéo à haute bande passanteLorsque vous utilisez des formats vidéo à haute bande passante comme 4K/60p YCbCr 4:4:4/YCbCr 4:2:2/RGB 4:4:4 ou 4K/60p YCbCr 4:2:0 Deep Color (Deep Colour) (10 ou 12 bits), veillez à régler [HDMI Signal Format].

1 Sélectionnez [Setup] - [HDMI Setup] - [HDMI Signal Format] dans le menu d’accueil.

2 Sélectionnez l’entrée HDMI à laquelle vous souhaitez appliquer le paramètre.3 Sélectionnez [Enhanced format].Remarques•Pour en savoir plus sur le format vidéo à haute bande passante, consultez le Guide d’aide.•Lorsque [Enhanced format] est sélectionné, nous conseillons d’utiliser un câble HDMI haute vitesse avec

Ethernet, qui peut prendre en charge une bande passante jusqu’à 18 Gbits/s.•Lorsque [Enhanced format] est sélectionné, certains périphériques (décodeurs câble ou décodeurs

satellite, lecteurs Blu-ray Disc et lecteurs DVD) peuvent mal fonctionner. Le cas échéant, sélectionnez [Standard format].

•Si votre téléviseur possède un menu similaire pour le format vidéo à haute bande passante, vérifiez le réglage sur le menu du téléviseur lorsque vous sélectionnez [Enhanced format] sur cet ampli-tuner. Pour en savoir plus sur le réglage du menu du téléviseur, reportez-vous à son mode d’emploi.

Établissement d’une connexion pour PoE (Power over Ethernet)L’illustration suivante est un exemple de configuration d’un réseau domestique avec l’ampli-tuner et un ordinateur.

Câble LAN

Modem

Point d’accès sans fil, etc.

Caméra réseau, etc.Câble LAN

Câble LAN

Câble LAN

Ordinateur Routeur

Internet

Remarques•Raccordez un routeur à l’un des ports 1 à 8 de l’ampli-tuner à l’aide d’un câble LAN. Ne connectez pas le

même routeur sur l’ampli-tuner à l’aide de plus d’un câble LAN. Cela pourrait provoquer un dysfonctionnement.

•Les ports n° 1 et n° 2 prennent en charge PoE (Power over Ethernet, Alternative A). Si vous raccordez à un appareil compatible PoE sur l’un de ces ports, l’alimentation est fournie à l’appareil à partir de l’ampli-tuner.

•Vous pouvez également raccorder un appareil qui ne prend pas en charge PoE sur le port PoE.•Le port PoE s’allume en rouge lorsqu’il fournit l’alimentation.•Cet ampli-tuner prend en charge PoE, classe 3.

12FR

Établissement d’une connexion sur plusieurs zonesCet ampli-tuner autorise des connexions sur plusieurs zones.

Exemple de configuration

Prise de sortie Appareil raccordé Méthode de raccordement

HDMI OUT A Téléviseur Raccordement : Raccordez au téléviseur via la prise HDMI OUT A.

Fonctionnement de l’ampli-tuner : Appuyez sur HDMI OUT pour sélectionner HDMI A.

HDMI OUT B Téléviseur Raccordement : Raccordez au téléviseur via la prise HDMI OUT B.

Menu de réglage : Sélectionnez [Setup] - [HDMI Setup] - [HDMI Out B Mode] - [Zone2] dans le menu d’accueil. Sélectionnez [Setup] - [HDMI Setup] - [Zone2 Audio Out] - [Zone2 TV + AMP] depuis le menu d’accueil.

Bornes SPEAKERSFRONT ACENTERSURROUND

Enceintes 5 canaux et 1 ou 2 caisson de graves

Raccordement : Raccordez les enceintes et le ou les caissons de graves.

Menu de réglage : Exécutez le calibrage automatique et effectuez les réglages suivants. Sélectionnez [Setup] - [Speaker Setup] - [SB Speaker Assign] - [Zone2] dans le menu d’accueil.

Conseil•Sélectionnez [Setup] - [Input Setup] - [In-Ceiling Speaker Mode] - [On] si vous

utilisez des enceintes au plafond.

Bornes SPEAKERSSURROUND BACK (FRONT B/BI-AMP/ZONE 2) (en cas d’assignation à la zone 2)

Enceintes 2 canaux Raccordement : Raccordez des enceintes G/D de la zone 2.

Menu de réglage : Exécutez le calibrage automatique et effectuez les réglages suivants. Sélectionnez [Setup] - [Speaker Setup] - [SB Speaker Assign] - [Zone2] dans le menu d’accueil.

13FR

Racco

rde

me

nts

Modèles d’enceintes et bornes à raccorderLorsque vous raccordez des enceintes à l’ampli-tuner, consultez le tableau suivant.Vous pouvez utiliser ce tableau pour confirmer les modèles d’enceintes pris en charge par l’ampli-tuner, ainsi que les bornes d’enceintes auxquelles les enceintes de chaque modèle doivent être raccordées.Pour régler le modèle d’enceinte, sélectionnez [Setup] - [Speaker Setup] - [Speaker Pattern] dans le menu d’accueil.

Les abréviations et le symbole utilisés dans la liste sont les suivants.

FH : Enceintes avant hautesTF : Enceintes avant

supérieuresTM : Enceintes centrales

supérieuresTR : Enceintes arrière

supérieuresRH : Enceintes arrière

hautes

FD : Enceintes avant dotées de la fonctionnalité Dolby Atmos

SRD : Enceintes surround dotées de la fonctionnalité Dolby Atmos

SBD : Enceintes surround arrière dotées de la fonctionnalité Dolby Atmos

: Aucune borne d’enceinte ne peut être affectée et la sortie est activée à partir des prises PRE OUT uniquement.

SB : Bornes SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2)

H1 : Bornes SPEAKERS HEIGHT 1 (ZONE 2)

Ce qu’indiquent les chiffres des modèles d’enceintes :

7 . 1 . 4Nombre d’enceintes situées au niveau de l’auditeur Nombre de

caissons de graves

Nombre d’enceintes de hauteur ou aériennes (supérieures)

Modèle d’enceinte

Bornes SPEAKERS / prises PRE OUT

Raccordement Zone 2*1

Raccordement d’enceinte Front B*1

Raccordement bi-

amplificateur*1FRONT

A CENTER SURROUND

SURROUND BACK (FRONT

B/BI-AMP/ZONE 2) (simple)


B/BI-AMP/ZONE 2) (L/R)


2.0 - - - - - - - SB ou H1 SB SB2.0.2 (TM) - - - - (TM) - - SB SB SB2.0.2 (FD) - - - - (FD) - - SB SB SB2.1 - - - - - - SB ou H1 SB SB2.1.2 (TM) - - - - (TM) - SB SB SB2.1.2 (FD) - - - - (FD) - SB SB SB3.0 - - - - - - SB ou H1 SB SB3.0.2 (TM) - - - (TM) - - SB SB SB3.0.2 (FD) - - - (FD) - - SB SB SB3.1 - - - - - SB ou H1 SB SB3.1.2 (TM) - - - (TM) - SB SB SB3.1.2 (FD) - - - (FD) - SB SB SB4.0 - - - - - - SB ou H1 SB SB4.0.2 (FH) - - - (FH) - - SB SB SB4.0.2 (TM) - - - (TM) - - SB SB SB4.0.2 (FD) - - - (FD) - - SB SB SB4.0.2 (SRD) - - - (SRD) - - SB SB SB4.0.4 (FH+TM) - - - (FH) (TM)*2 - SB SB SB4.0.4 (FH+TR) - - - (FH) (TR)*2 - SB SB SB4.0.4 (FH+RH) - - - (FH) (RH)*2 - SB SB SB4.0.4 (TF+TM) - - - (TF) (TM)*2 - SB SB SB4.0.4 (TF+TR) - - - (TF) (TR)*2 - SB SB SB4.0.4 (TF+RH) - - - (TF) (RH)*2 - SB SB SB4.0.4 (TM+TR) - - - (TM) (TR)*2 - SB SB SB4.0.4 (TM+RH) - - - (TM) (RH)*2 - SB SB SB4.0.4 (FD+SRD) - - - (FD) (SRD)*2 - SB SB SB4.1 - - - - - SB ou H1 SB SB

14FR





Raccordement bi-


A CENTER SURROUND






4.1.2 (FH) - - - (FH) - SB SB SB4.1.2 (TM) - - - (TM) - SB SB SB4.1.2 (FD) - - - (FD) - SB SB SB4.1.2 (SRD) - - - (SRD) - SB SB SB4.1.4 (FH+TM) - - - (FH) (TM)*2 SB SB SB4.1.4 (FH+TR) - - - (FH) (TR)*2 SB SB SB4.1.4 (FH+RH) - - - (FH) (RH)*2 SB SB SB4.1.4 (TF+TM) - - - (TF) (TM)*2 SB SB SB4.1.4 (TF+TR) - - - (TF) (TR)*2 SB SB SB4.1.4 (TF+RH) - - - (TF) (RH)*2 SB SB SB4.1.4 (TM+TR) - - - (TM) (TR)*2 SB SB SB4.1.4 (TM+RH) - - - (TM) (RH)*2 SB SB SB4.1.4 (FD+SRD) - - - (FD) (SRD)*2 SB SB SB5.0 - - - - - SB ou H1 SB SB5.0.2 (FH) - - (FH) - - SB SB SB5.0.2 (TM) - - (TM) - - SB SB SB5.0.2 (FD) - - (FD) - - SB SB SB5.0.2 (SRD) - - (SRD) - - SB SB SB5.0.4 (FH+TM) - - (FH) (TM)*2 - SB SB SB5.0.4 (FH+TR) - - (FH) (TR)*2 - SB SB SB5.0.4 (FH+RH) - - (FH) (RH)*2 - SB SB SB5.0.4 (TF+TM) - - (TF) (TM)*2 - SB SB SB5.0.4 (TF+TR) - - (TF) (TR)*2 - SB SB SB5.0.4 (TF+RH) - - (TF) (RH)*2 - SB SB SB5.0.4 (TM+TR) - - (TM) (TR)*2 - SB SB SB5.0.4 (TM+RH) - - (TM) (RH)*2 - SB SB SB5.0.4 (FD+SRD) - - (FD) (SRD)*2 - SB SB SB5.1 - - - - SB ou H1 SB SB5.1.2 (FH) - - (FH) - SB SB SB5.1.2 (TM) - - (TM) - SB SB SB5.1.2 (FD) - - (FD) - SB SB SB5.1.2 (SRD) - - (SRD) - SB SB SB5.1.4 (FH+TM) - - (FH) (TM)*2 SB SB SB5.1.4 (FH+TR) - - (FH) (TR)*2 SB SB SB5.1.4 (FH+RH) - - (FH) (RH)*2 SB SB SB5.1.4 (TF+TM) - - (TF) (TM)*2 SB SB SB5.1.4 (TF+TR) - - (TF) (TR)*2 SB SB SB5.1.4 (TF+RH) - - (TF) (RH)*2 SB SB SB5.1.4 (TM+TR) - - (TM) (TR)*2 SB SB SB5.1.4 (TM+RH) - - (TM) (RH)*2 SB SB SB5.1.4 (FD+SRD) - - (FD) (SRD)*2 SB SB SB

5.0 (SB) - - - - - H1Non

disponibleNon

disponible

5.0.2 (SB+FH) - - (FH) - -Seulement PRE OUT

Non disponible

Non disponible

5.0.2 (SB+TM) - - (TM) - -Seulement PRE OUT

Non disponible

Non disponible

5.0.2 (SB+FD) - - (FD) - -Seulement PRE OUT

Non disponible

Non disponible

5.0.2 (SB+SRD) - - (SRD) - -Seulement PRE OUT

Non disponible

Non disponible

5.0.4 (SB+FH+TM) - - (FH) (TM) -Seulement PRE OUT

Non disponible

Non disponible

5.0.4 (SB+FH+TR) - - (FH) (TR) -Seulement PRE OUT

Non disponible

Non disponible

5.0.4 (SB+FH+RH) - - (FH) (RH) -Seulement PRE OUT

Non disponible

Non disponible

15FR

Racco

rde

me

nts





Raccordement bi-


A CENTER SURROUND






5.0.4 (SB+TF+TM) - - (TF) (TM) -Seulement PRE OUT

Non disponible

Non disponible

5.0.4 (SB+TF+TR) - - (TF) (TR) -Seulement PRE OUT

Non disponible

Non disponible

5.0.4 (SB+TF+RH) - - (TF) (RH) -Seulement PRE OUT

Non disponible

Non disponible

5.0.4 (SB+TM+TR) - - (TM) (TR) -Seulement PRE OUT

Non disponible

Non disponible

5.0.4 (SB+TM+RH) - - (TM) (RH) -Seulement PRE OUT

Non disponible

Non disponible

5.0.4 (SB+FD+SRD) - - (FD) (SRD) -Seulement PRE OUT

Non disponible

Non disponible

5.1 (SB) - - - - H1Non

disponibleNon

disponible

5.1.2 (SB+FH) - - (FH) - Seulement PRE OUT

Non disponible

Non disponible

5.1.2 (SB+TM) - - (TM) - Seulement PRE OUT

Non disponible

Non disponible

5.1.2 (SB+FD) - - (FD) - Seulement PRE OUT

Non disponible

Non disponible

5.1.2 (SB+SRD) - - (SRD) - Seulement PRE OUT

Non disponible

Non disponible

5.1.4 (SB+FH+TM) - - (FH) (TM) Seulement PRE OUT

Non disponible

Non disponible

5.1.4 (SB+FH+TR) - - (FH) (TR) Seulement PRE OUT

Non disponible

Non disponible

5.1.4 (SB+FH+RH) - - (FH) (RH) Seulement PRE OUT

Non disponible

Non disponible

5.1.4 (SB+TF+TM) - - (TF) (TM) Seulement PRE OUT

Non disponible

Non disponible

5.1.4 (SB+TF+TR) - - (TF) (TR) Seulement PRE OUT

Non disponible

Non disponible

5.1.4 (SB+TF+RH) - - (TF) (RH) Seulement PRE OUT

Non disponible

Non disponible

5.1.4 (SB+TM+TR) - - (TM) (TR) Seulement PRE OUT

Non disponible

Non disponible

5.1.4 (SB+TM+RH) - - (TM) (RH) Seulement PRE OUT

Non disponible

Non disponible

5.1.4 (SB+FD+SRD) - - (FD) (SRD) Seulement PRE OUT

Non disponible

Non disponible

6.0 (SB) - - - - H1Non

disponibleNon

disponible

6.0.2 (SB+FH) - (FH) - -Seulement PRE OUT

Non disponible

Non disponible

6.0.2 (SB+TM) - (TM) - -Seulement PRE OUT

Non disponible

Non disponible

6.0.2 (SB+FD) - (FD) - -Seulement PRE OUT

Non disponible

Non disponible

6.0.2 (SB+SRD) - (SRD) - -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (SB+FH+TM) - (FH) (TM) -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (SB+FH+TR) - (FH) (TR) -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (SB+FH+RH) - (FH) (RH) -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (SB+TF+TM) - (TF) (TM) -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (SB+TF+TR) - (TF) (TR) -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (SB+TF+RH) - (TF) (RH) -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (SB+TM+TR) - (TM) (TR) -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (SB+TM+RH) - (TM) (RH) -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (SB+FD+SRD) - (FD) (SRD) -Seulement PRE OUT

Non disponible

Non disponible

16FR





Raccordement bi-


A CENTER SURROUND






6.1 (SB) - - - H1Non

disponibleNon

disponible

6.1.2 (SB+FH) - (FH) - Seulement PRE OUT

Non disponible

Non disponible

6.1.2 (SB+TM) - (TM) - Seulement PRE OUT

Non disponible

Non disponible

6.1.2 (SB+FD) - (FD) - Seulement PRE OUT

Non disponible

Non disponible

6.1.2 (SB+SRD) - (SRD) - Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (SB+FH+TM) - (FH) (TM) Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (SB+FH+TR) - (FH) (TR) Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (SB+FH+RH) - (FH) (RH) Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (SB+TF+TM) - (TF) (TM) Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (SB+TF+TR) - (TF) (TR) Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (SB+TF+RH) - (TF) (RH) Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (SB+TM+TR) - (TM) (TR) Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (SB+TM+RH) - (TM) (RH) Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (SB+FD+SRD) - (FD) (SRD) Seulement PRE OUT

Non disponible

Non disponible

6.0 - - - - - H1Non

disponibleNon

disponible

6.0.2 (FH) - - (FH) - -Seulement PRE OUT

Non disponible

Non disponible

6.0.2 (TM) - - (TM) - -Seulement PRE OUT

Non disponible

Non disponible

6.0.2 (FD) - - (FD) - -Seulement PRE OUT

Non disponible

Non disponible

6.0.2 (SRD) - - (SRD) - -Seulement PRE OUT

Non disponible

Non disponible

6.0.2 (SBD) - - (SBD) - -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (FH+TM) - - (FH) (TM) -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (FH+TR) - - (FH) (TR) -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (FH+RH) - - (FH) (RH) -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (TF+TM) - - (TF) (TM) -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (TF+TR) - - (TF) (TR) -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (TF+RH) - - (TF) (RH) -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (TM+TR) - - (TM) (TR) -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (TM+RH) - - (TM) (RH) -Seulement PRE OUT

Non disponible

Non disponible

6.0.4 (FD+SBD) - - (FD) (SBD) -Seulement PRE OUT

Non disponible

Non disponible

6.1 - - - - H1Non

disponibleNon

disponible

6.1.2 (FH) - - (FH) - Seulement PRE OUT

Non disponible

Non disponible

6.1.2 (TM) - - (TM) - Seulement PRE OUT

Non disponible

Non disponible

6.1.2 (FD) - - (FD) - Seulement PRE OUT

Non disponible

Non disponible

6.1.2 (SRD) - - (SRD) - Seulement PRE OUT

Non disponible

Non disponible

17FR

Racco

rde

me

nts





Raccordement bi-


A CENTER SURROUND






6.1.2 (SBD) - - (SBD) - Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (FH+TM) - - (FH) (TM) Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (FH+TR) - - (FH) (TR) Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (FH+RH) - - (FH) (RH) Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (TF+TM) - - (TF) (TM) Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (TF+TR) - - (TF) (TR) Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (TF+RH) - - (TF) (RH) Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (TM+TR) - - (TM) (TR) Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (TM+RH) - - (TM) (RH) Seulement PRE OUT

Non disponible

Non disponible

6.1.4 (FD+SBD) - - (FD) (SBD) Seulement PRE OUT

Non disponible

Non disponible

7.0 - - - - H1Non

disponibleNon

disponible

7.0.2 (FH) - (FH) - -Seulement PRE OUT

Non disponible

Non disponible

7.0.2 (TM) - (TM) - -Seulement PRE OUT

Non disponible

Non disponible

7.0.2 (FD) - (FD) - -Seulement PRE OUT

Non disponible

Non disponible

7.0.2 (SRD) - (SRD) - -Seulement PRE OUT

Non disponible

Non disponible

7.0.2 (SBD) - (SBD) - -Seulement PRE OUT

Non disponible

Non disponible

7.0.4 (FH+TM) - (FH) (TM) -Seulement PRE OUT

Non disponible

Non disponible

7.0.4 (FH+TR) - (FH) (TR) -Seulement PRE OUT

Non disponible

Non disponible

7.0.4 (FH+RH) - (FH) (RH) -Seulement PRE OUT

Non disponible

Non disponible

7.0.4 (TF+TM) - (TF) (TM) -Seulement PRE OUT

Non disponible

Non disponible

7.0.4 (TF+TR) - (TF) (TR) -Seulement PRE OUT

Non disponible

Non disponible

7.0.4 (TF+RH) - (TF) (RH) -Seulement PRE OUT

Non disponible

Non disponible

7.0.4 (TM+TR) - (TM) (TR) -Seulement PRE OUT

Non disponible

Non disponible

7.0.4 (TM+RH

multi channel av receiver › electronics › support › res › ...guía de instalación es before...

Documents