Nano-tube battery

the power future

Active Carbon Nanofiber contains quantum , micro, and surface effect, and Macroscopic Quantum Tunneling. It has a very large relative surface area, very high activity and density rate, high heat dissipation rate, and large dispersion rate. Even passing through a high current it only results in very small current concentration

The individual tube diameter of the Carbon Nanofiber is 20-80 nm, with the length of 200-300 nm

Nano-tube battery How does it charge

• the anode is made by aluminum

• the cathode substrate plate is copper

• Carbon-based Nanofiber layer 2 spray-coated on the surface of a conductive plates.

• The individual tube diameter of the Carbon Nanofiber layer is 20-80 nm, with the length of 200-300 nm.

after 15,000 cycles the cells still retained over 85% of their original charge capacity They were deep charged and discharged meaning they were taken to 100% charge and 0% charge respectively during the 6-minute cycles partial charging and discharging of the battery does not appear to impact the life or the holding charge capacity of the batteriesToshiba states that it tested a new battery by discharging and fully recharging one thousand times at 77 degrees and found that it lost only one percent of its capacity